[PATCH 00/19] x86, mpx updates for 4.2 (take 6)

[PATCH 00/19] x86, mpx updates for 4.2 (take 6)

[Dave Hansen]

Changes from take 5 / v20:

 * Fix get_xsave_addr() to consult xstate_bv in anticipation
   of fixes to xsave code.
 * Bug fix for when an VMA being unmapped has neighbors which
   are bounds tables.
 * Rewrite unmapping code.  I didn't do this lightly. It was
   not originally my own code, and I resisted changing it
   because it worked.  But, I started bug chasing and decided
   it was unmaintainable.  The rewrite ended up removing
   about 20% of the unmapping code and made it much simpler.

Changes from take 4 / v19:

 * Do not pass a task_struct around when we are
   really just going to operate on current

Changes from take 3 / v18 (all minor):

 * use DECLARE_EVENT_CLASS()/DEFINE_EVENT() for
   the ranged tracepoints to save 10 lines of code.

Changes from take 2 / v17 (all minor):

 * fix a couple of whitespace borkages caught by checkpatch,
   and a spelling error or two.
 * replace printk with pr_info() for boot disable
 * change trace print format for address intervals
 * fix up variable name in tsk_get_xsave_addr() comment
 * remove tsk_get_xsave_field() GPL export
 * fix up Qiaowei's From:

--

Hi x86 maintainers,

There are a few basic things going on here:
1. Make FPU/xsave code preempt safe and work properly
2. Add trace points to make kernel and app debugging easier
3. Add a boot-time disable for mpx
4. Rewrite the unmapping code.
5. Support 32-bit binaries to run on 64-bit kernels

This sees breakage unless either booted with 'noxsaves'
or if it has Fenghua's set from here applied:

	http://lkml.kernel.org/r/1429678319-61356-1-git-send-email-fenghua.yu@intel.com

This set is also available against 4.1-rc2 in git:

  git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx.git mpx-v21

 Documentation/kernel-parameters.txt |    4
 arch/x86/include/asm/mmu_context.h  |   13
 arch/x86/include/asm/mpx.h          |   76 ++--
 arch/x86/include/asm/processor.h    |   12
 arch/x86/include/asm/xsave.h        |    1
 arch/x86/kernel/cpu/common.c        |   16
 arch/x86/kernel/traps.c             |   18 -
 arch/x86/kernel/uprobes.c           |   10
 arch/x86/kernel/xsave.c             |   73 +++-
 arch/x86/mm/mpx.c                   |  634 +++++++++++++++++++++---------------
 kernel/sys.c                        |    8
 11 files changed, 543 insertions(+), 322 deletions(-)

[PATCH 01/19] x86, mpx, xsave: fix up bad get_xsave_addr() assumptions

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

get_xsave_addr() assumes that if an xsave bit is present in the
hardware (pcntxt_mask) that it is present in a given xsave
buffer.  Due to an bug in the xsave code on all of the systems
that have MPX (and thus all the users of this code), that has
been a true assumption.

But, the bug is getting fixed, so our assumption is not going
to hold any more.

It's quite possible (and normal) for an enabled state to be
present on 'pcntxt_mask', but *not* in 'xstate_bv'.  We need
to consult 'xstate_bv'.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/kernel/xsave.c |   41 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 34 insertions(+), 7 deletions(-)

diff -puN arch/x86/kernel/xsave.c~consullt-xstate_bv arch/x86/kernel/xsave.c
--- a/arch/x86/kernel/xsave.c~consullt-xstate_bv	2015-05-08 11:46:10.595563814 -0700
+++ b/arch/x86/kernel/xsave.c	2015-05-08 11:46:10.598563949 -0700
@@ -706,19 +706,46 @@ void __init_refok eager_fpu_init(void)
  * This is the API that is called to get xstate address in either
  * standard format or compacted format of xsave area.
  *
+ * Note that if there is no data for the field in the xsave buffer
+ * this will return NULL.
+ *
  * Inputs:
- *	xsave: base address of the xsave area;
- *	xstate: state which is defined in xsave.h (e.g. XSTATE_FP, XSTATE_SSE,
- *	etc.)
+ *	xstate: the thread's storage area for all FPU data
+ *	xstate_field: state which is defined in xsave.h (e.g. XSTATE_FP,
+ *	XSTATE_SSE, etc...)
  * Output:
  *	address of the state in the xsave area.
  */
-void *get_xsave_addr(struct xsave_struct *xsave, int xstate)
+void *get_xsave_addr(struct xsave_struct *xsave, int xstate_field)
 {
-	int feature = fls64(xstate) - 1;
-	if (!test_bit(feature, (unsigned long *)&pcntxt_mask))
+	int feature_nr = fls64(xstate_field) - 1;
+	/*
+	 * Do we even *have* xsave state?
+	 */
+	if (!boot_cpu_has(X86_FEATURE_XSAVE))
+		return NULL;
+
+	xsave = &current->thread.fpu.state->xsave;
+	/*
+	 * We should not ever be requesting fields that we
+	 * have not enabled.  Remember that pcntxt_mask is
+	 * what we write to the XCR0 register.
+	 */
+	WARN_ONCE(!(pcntxt_mask & xstate_field), "get of unsupported state");
+	/*
+	 * This assumes the last 'xsave*' instruction to
+	 * have requested that 'xstate_field' be saved.
+	 * If it did not, we might be seeing and old value
+	 * of the field in the buffer.
+	 *
+	 * This can happen because the last 'xsave' did not
+	 * request that this feature be saved (unlikely)
+	 * or because the "init optimization" caused it
+	 * to not be saved.
+	 */
+	if (!(xsave->xsave_hdr.xstate_bv & xstate_field))
 		return NULL;
 
-	return (void *)xsave + xstate_comp_offsets[feature];
+	return (void *)xsave + xstate_comp_offsets[feature_nr];
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
_

Re: [PATCH 01/19] x86, mpx, xsave: fix up bad get_xsave_addr() assumptions

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> From: Dave Hansen <dave.hansen@linux.intel.com>
> 
> get_xsave_addr() assumes that if an xsave bit is present in the
> hardware (pcntxt_mask) that it is present in a given xsave
> buffer.  Due to an bug in the xsave code on all of the systems
> that have MPX (and thus all the users of this code), that has
> been a true assumption.
> 
> But, the bug is getting fixed, so our assumption is not going
> to hold any more.
> 
> It's quite possible (and normal) for an enabled state to be
> present on 'pcntxt_mask', but *not* in 'xstate_bv'.  We need
> to consult 'xstate_bv'.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 02/19] x86, fpu: wrap get_xsave_addr() to make it safer

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

Changes from "v19":
 * remove 'tsk' argument to get_xsave_addr() since the code
   can only realistically work on 'current', and fix up the
   comment a bit to match.

Changes from "v17":
 * fix s/xstate/xsave_field/ in the function comment
 * remove EXPORT_SYMBOL_GPL()

---
From: Dave Hansen <dave.hansen@linux.intel.com>

The MPX code appears to be saving off the FPU in an unsafe
way.   It does not disable preemption or ensure that the
FPU state has been allocated.

This patch introduces a new helper which will do both of
those things internally.

Note that this requires a patch from Oleg in order to work
properly.  It is currently in tip/x86/fpu.

> commit f893959b0898bd876673adbeb6798bdf25c034d7
> Author: Oleg Nesterov <oleg@redhat.com>
> Date:   Fri Mar 13 18:30:30 2015 +0100
>
>    x86/fpu: Don't abuse drop_init_fpu() in flush_thread()

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: bp@alien8.de
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
---

 b/arch/x86/include/asm/xsave.h |    1 +
 b/arch/x86/kernel/xsave.c      |   32 ++++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff -puN arch/x86/include/asm/xsave.h~tsk_get_xsave_addr arch/x86/include/asm/xsave.h
--- a/arch/x86/include/asm/xsave.h~tsk_get_xsave_addr	2015-05-08 11:46:10.973580863 -0700
+++ b/arch/x86/include/asm/xsave.h	2015-05-08 11:46:10.978581089 -0700
@@ -252,6 +252,7 @@ static inline int xrestore_user(struct x
 }
 
 void *get_xsave_addr(struct xsave_struct *xsave, int xstate);
+void *get_xsave_field(int xstate_field);
 void setup_xstate_comp(void);
 
 #endif
diff -puN arch/x86/kernel/xsave.c~tsk_get_xsave_addr arch/x86/kernel/xsave.c
--- a/arch/x86/kernel/xsave.c~tsk_get_xsave_addr	2015-05-08 11:46:10.975580953 -0700
+++ b/arch/x86/kernel/xsave.c	2015-05-08 11:46:10.978581089 -0700
@@ -749,3 +749,35 @@ void *get_xsave_addr(struct xsave_struct
 	return (void *)xsave + xstate_comp_offsets[feature_nr];
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
+
+/*
+ * This wraps up the common operations that need to occur when retrieving
+ * data from xsave state.  It first ensures that the current task was
+ * using the FPU and retrieves the data in to a buffer.  It then calculates
+ * the offset of the requested field in the buffer.
+ *
+ * This function is safe to call whether the FPU is in use or not.
+ *
+ * Note that this only works on the current task.
+ *
+ * Inputs:
+ *	@xsave_field: state which is defined in xsave.h (e.g. XSTATE_FP,
+ *	XSTATE_SSE, etc...)
+ * Output:
+ *	address of the state in the xsave area.
+ */
+void *get_xsave_field(int xsave_field)
+{
+	union thread_xstate *xstate;
+
+	if (!tsk_used_math(current))
+		return NULL;
+	/*
+	 * unlazy_fpu() is poorly named and will actually
+	 * save the xstate off in to the memory buffer.
+	 */
+	unlazy_fpu(current);
+	xstate = current->thread.fpu.state;
+
+	return get_xsave_addr(&xstate->xsave, xsave_field);
+}
_

Re: [PATCH 02/19] x86, fpu: wrap get_xsave_addr() to make it safer

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> The MPX code appears to be saving off the FPU in an unsafe
> way.   It does not disable preemption or ensure that the
> FPU state has been allocated.
> 
> This patch introduces a new helper which will do both of
> those things internally.

This changelog does not really match the implementation. Unless I'm
missing something I can't find anything preemption related.

> +
> +/*
> + * This wraps up the common operations that need to occur when retrieving
> + * data from xsave state.  It first ensures that the current task was
> + * using the FPU and retrieves the data in to a buffer.  It then calculates
> + * the offset of the requested field in the buffer.
> + *
> + * This function is safe to call whether the FPU is in use or not.
> + *
> + * Note that this only works on the current task.
> + *
> + * Inputs:
> + *	@xsave_field: state which is defined in xsave.h (e.g. XSTATE_FP,
> + *	XSTATE_SSE, etc...)
> + * Output:
> + *	address of the state in the xsave area.

  or NULL in case of .....

> + */
> +void *get_xsave_field(int xsave_field)
> +{
> +	union thread_xstate *xstate;
> +
> +	if (!tsk_used_math(current))
> +		return NULL;
> +	/*
> +	 * unlazy_fpu() is poorly named and will actually
> +	 * save the xstate off in to the memory buffer.
> +	 */
> +	unlazy_fpu(current);
> +	xstate = current->thread.fpu.state;
> +
> +	return get_xsave_addr(&xstate->xsave, xsave_field);
> +}

Thanks,

	tglx

Re: [PATCH 02/19] x86, fpu: wrap get_xsave_addr() to make it safer

[Thomas Gleixner]

On Mon, 18 May 2015, Thomas Gleixner wrote:

> On Fri, 8 May 2015, Dave Hansen wrote:
> > The MPX code appears to be saving off the FPU in an unsafe
> > way.   It does not disable preemption or ensure that the
> > FPU state has been allocated.
> > 
> > This patch introduces a new helper which will do both of
> > those things internally.
> 
> This changelog does not really match the implementation. Unless I'm
> missing something I can't find anything preemption related.

Gah. Hit send before finishing the mail.

It's unlazy_fpu (which I agree is a horrible name) which does the
right thing.

> > +
> > +/*
> > + * This wraps up the common operations that need to occur when retrieving
> > + * data from xsave state.  It first ensures that the current task was
> > + * using the FPU and retrieves the data in to a buffer.  It then calculates
> > + * the offset of the requested field in the buffer.
> > + *
> > + * This function is safe to call whether the FPU is in use or not.
> > + *
> > + * Note that this only works on the current task.
> > + *
> > + * Inputs:
> > + *	@xsave_field: state which is defined in xsave.h (e.g. XSTATE_FP,
> > + *	XSTATE_SSE, etc...)
> > + * Output:
> > + *	address of the state in the xsave area.
> 
>   or NULL in case of .....
> 
> > + */
> > +void *get_xsave_field(int xsave_field)
> > +{
> > +	union thread_xstate *xstate;
> > +
> > +	if (!tsk_used_math(current))
> > +		return NULL;
> > +	/*
> > +	 * unlazy_fpu() is poorly named and will actually
> > +	 * save the xstate off in to the memory buffer.
> > +	 */
> > +	unlazy_fpu(current);
> > +	xstate = current->thread.fpu.state;
> > +
> > +	return get_xsave_addr(&xstate->xsave, xsave_field);
> > +}
> 
> Thanks,
> 
> 	tglx
> 

[PATCH 03/19] x86, mpx: use new tsk_get_xsave_addr()

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The MPX registers (bndcsr/bndcfgu/bndstatus) are not directly
accessible via normal instructions.  They essentially act as
if they were floating point registers and are saved/restored
along with those registers.

There are two main paths in the MPX code where we care about
the contents of these registers:
	1. #BR (bounds) faults
	2. the prctl() code where we are setting MPX up

Both of those paths _might_ be called without the FPU having
been used.  That means that 'tsk->thread.fpu.state' might
never be allocated.

Also, fpu_save_init() is not preempt-safe.  It was a bug to
call it without disabling preemption.  The new
tsk_get_xsave_addr() calls unlazy_fpu() instead and properly
disables preemption.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: bp@alien8.de
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
---

 b/arch/x86/include/asm/mpx.h |    8 ++++----
 b/arch/x86/kernel/traps.c    |   15 +++++++--------
 b/arch/x86/mm/mpx.c          |   23 +++++++++++------------
 3 files changed, 22 insertions(+), 24 deletions(-)

diff -puN arch/x86/include/asm/mpx.h~use-new-tsk_get_xsave_addr arch/x86/include/asm/mpx.h
--- a/arch/x86/include/asm/mpx.h~use-new-tsk_get_xsave_addr	2015-05-08 11:46:11.385599446 -0700
+++ b/arch/x86/include/asm/mpx.h	2015-05-08 11:46:11.392599762 -0700
@@ -60,8 +60,8 @@
 
 #ifdef CONFIG_X86_INTEL_MPX
 siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-				struct xsave_struct *xsave_buf);
-int mpx_handle_bd_fault(struct xsave_struct *xsave_buf);
+				struct task_struct *tsk);
+int mpx_handle_bd_fault(struct task_struct *tsk);
 static inline int kernel_managing_mpx_tables(struct mm_struct *mm)
 {
 	return (mm->bd_addr != MPX_INVALID_BOUNDS_DIR);
@@ -78,11 +78,11 @@ void mpx_notify_unmap(struct mm_struct *
 		      unsigned long start, unsigned long end);
 #else
 static inline siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-					      struct xsave_struct *xsave_buf)
+					      struct task_struct *tsk)
 {
 	return NULL;
 }
-static inline int mpx_handle_bd_fault(struct xsave_struct *xsave_buf)
+static inline int mpx_handle_bd_fault(struct task_struct *tsk)
 {
 	return -EINVAL;
 }
diff -puN arch/x86/kernel/traps.c~use-new-tsk_get_xsave_addr arch/x86/kernel/traps.c
--- a/arch/x86/kernel/traps.c~use-new-tsk_get_xsave_addr	2015-05-08 11:46:11.387599536 -0700
+++ b/arch/x86/kernel/traps.c	2015-05-08 11:46:11.392599762 -0700
@@ -61,6 +61,7 @@
 #include <asm/mach_traps.h>
 #include <asm/alternative.h>
 #include <asm/mpx.h>
+#include <asm/xsave.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/x86_init.h>
@@ -372,7 +373,6 @@ dotraplinkage void do_double_fault(struc
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
-	struct xsave_struct *xsave_buf;
 	enum ctx_state prev_state;
 	struct bndcsr *bndcsr;
 	siginfo_t *info;
@@ -393,12 +393,11 @@ dotraplinkage void do_bounds(struct pt_r
 
 	/*
 	 * We need to look at BNDSTATUS to resolve this exception.
-	 * It is not directly accessible, though, so we need to
-	 * do an xsave and then pull it out of the xsave buffer.
+	 * A NULL here might mean that it is in its 'init state',
+	 * which is all zeros which indicates MPX was not
+	 * responsible for the exception.
 	 */
-	fpu_save_init(&tsk->thread.fpu);
-	xsave_buf = &(tsk->thread.fpu.state->xsave);
-	bndcsr = get_xsave_addr(xsave_buf, XSTATE_BNDCSR);
+	bndcsr = get_xsave_field(XSTATE_BNDCSR);
 	if (!bndcsr)
 		goto exit_trap;
 
@@ -409,11 +408,11 @@ dotraplinkage void do_bounds(struct pt_r
 	 */
 	switch (bndcsr->bndstatus & MPX_BNDSTA_ERROR_CODE) {
 	case 2:	/* Bound directory has invalid entry. */
-		if (mpx_handle_bd_fault(xsave_buf))
+		if (mpx_handle_bd_fault(tsk))
 			goto exit_trap;
 		break; /* Success, it was handled */
 	case 1: /* Bound violation. */
-		info = mpx_generate_siginfo(regs, xsave_buf);
+		info = mpx_generate_siginfo(regs, tsk);
 		if (IS_ERR(info)) {
 			/*
 			 * We failed to decode the MPX instruction.  Act as if
diff -puN arch/x86/mm/mpx.c~use-new-tsk_get_xsave_addr arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~use-new-tsk_get_xsave_addr	2015-05-08 11:46:11.388599581 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:11.393599807 -0700
@@ -273,7 +273,7 @@ bad_opcode:
  * The caller is expected to kfree() the returned siginfo_t.
  */
 siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-				struct xsave_struct *xsave_buf)
+				struct task_struct *tsk)
 {
 	struct bndreg *bndregs, *bndreg;
 	siginfo_t *info = NULL;
@@ -295,8 +295,8 @@ siginfo_t *mpx_generate_siginfo(struct p
 		err = -EINVAL;
 		goto err_out;
 	}
-	/* get the bndregs _area_ of the xsave structure */
-	bndregs = get_xsave_addr(xsave_buf, XSTATE_BNDREGS);
+	/* get bndregs field from urrent task's xsave area */
+	bndregs = get_xsave_field(XSTATE_BNDREGS);
 	if (!bndregs) {
 		err = -EINVAL;
 		goto err_out;
@@ -358,8 +358,7 @@ static __user void *task_get_bounds_dir(
 	 * The bounds directory pointer is stored in a register
 	 * only accessible if we first do an xsave.
 	 */
-	fpu_save_init(&tsk->thread.fpu);
-	bndcsr = get_xsave_addr(&tsk->thread.fpu.state->xsave, XSTATE_BNDCSR);
+	bndcsr = get_xsave_field(XSTATE_BNDCSR);
 	if (!bndcsr)
 		return MPX_INVALID_BOUNDS_DIR;
 
@@ -390,9 +389,9 @@ int mpx_enable_management(struct task_st
 	 * directory into XSAVE/XRSTOR Save Area and enable MPX through
 	 * XRSTOR instruction.
 	 *
-	 * fpu_xsave() is expected to be very expensive. Storing the bounds
-	 * directory here means that we do not have to do xsave in the unmap
-	 * path; we can just use mm->bd_addr instead.
+	 * xsaves are expected to be very expensive.  Storing the bounds
+	 * directory here means that we do not have to do xsave in the
+	 * unmap path; we can just use mm->bd_addr instead.
 	 */
 	bd_base = task_get_bounds_dir(tsk);
 	down_write(&mm->mmap_sem);
@@ -498,12 +497,12 @@ out_unmap:
  * bound table is 16KB. With 64-bit mode, the size of BD is 2GB,
  * and the size of each bound table is 4MB.
  */
-static int do_mpx_bt_fault(struct xsave_struct *xsave_buf)
+static int do_mpx_bt_fault(struct task_struct *tsk)
 {
 	unsigned long bd_entry, bd_base;
 	struct bndcsr *bndcsr;
 
-	bndcsr = get_xsave_addr(xsave_buf, XSTATE_BNDCSR);
+	bndcsr = get_xsave_field(XSTATE_BNDCSR);
 	if (!bndcsr)
 		return -EINVAL;
 	/*
@@ -526,7 +525,7 @@ static int do_mpx_bt_fault(struct xsave_
 	return allocate_bt((long __user *)bd_entry);
 }
 
-int mpx_handle_bd_fault(struct xsave_struct *xsave_buf)
+int mpx_handle_bd_fault(struct task_struct *tsk)
 {
 	/*
 	 * Userspace never asked us to manage the bounds tables,
@@ -535,7 +534,7 @@ int mpx_handle_bd_fault(struct xsave_str
 	if (!kernel_managing_mpx_tables(current->mm))
 		return -EINVAL;
 
-	if (do_mpx_bt_fault(xsave_buf)) {
+	if (do_mpx_bt_fault(tsk)) {
 		force_sig(SIGSEGV, current);
 		/*
 		 * The force_sig() is essentially "handling" this
_

Re: [PATCH 03/19] x86, mpx: use new tsk_get_xsave_addr()

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:

> Subject: x86, mpx: use new tsk_get_xsave_addr()

-NOSUCHFUNCTION

And please let the sentence start with an upper case letter.

x86, mpx: Use ...

>  #ifdef CONFIG_X86_INTEL_MPX
>  siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
> -				struct xsave_struct *xsave_buf);
> -int mpx_handle_bd_fault(struct xsave_struct *xsave_buf);
> +				struct task_struct *tsk);
> +int mpx_handle_bd_fault(struct task_struct *tsk);

So you still keep *tsk and remove it in the next patch. I guess either
ordering has its value, so no problem to do it this way.

>  static inline int kernel_managing_mpx_tables(struct mm_struct *mm)
>  {
>  	return (mm->bd_addr != MPX_INVALID_BOUNDS_DIR);
> @@ -78,11 +78,11 @@ void mpx_notify_unmap(struct mm_struct *
>  		      unsigned long start, unsigned long end);
>  #else
>  static inline siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
> -					      struct xsave_struct *xsave_buf)
> +					      struct task_struct *tsk)

But that makes no sense. Introduce a new instance just to remove it
one patch later. So maybe cleaning up the *tsk thing first might be
the better approach, but I let you decide.

>  #include <asm/mach_traps.h>
>  #include <asm/alternative.h>
>  #include <asm/mpx.h>
> +#include <asm/xsave.h>
>  
>  #ifdef CONFIG_X86_64
>  #include <asm/x86_init.h>
> @@ -372,7 +373,6 @@ dotraplinkage void do_double_fault(struc
>  dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
>  {
>  	struct task_struct *tsk = current;
> -	struct xsave_struct *xsave_buf;
>  	enum ctx_state prev_state;
>  	struct bndcsr *bndcsr;
>  	siginfo_t *info;
> @@ -393,12 +393,11 @@ dotraplinkage void do_bounds(struct pt_r
>  
>  	/*
>  	 * We need to look at BNDSTATUS to resolve this exception.
> -	 * It is not directly accessible, though, so we need to
> -	 * do an xsave and then pull it out of the xsave buffer.
> +	 * A NULL here might mean that it is in its 'init state',
> +	 * which is all zeros which indicates MPX was not
> +	 * responsible for the exception.
>  	 */
> -	fpu_save_init(&tsk->thread.fpu);
> -	xsave_buf = &(tsk->thread.fpu.state->xsave);
> -	bndcsr = get_xsave_addr(xsave_buf, XSTATE_BNDCSR);
> +	bndcsr = get_xsave_field(XSTATE_BNDCSR);

Hmm, I did not notice when I looked at the patch which introduced
get_xsave_field(). But with the removed get_xsave_addr() I really had
to look twice.

get_xsave_field() suggest that you get the field content. So wouldn't
it be better to name it get_xsave_field_ptr() or such?

>  	if (!bndcsr)
>  		goto exit_trap;
>  
> @@ -409,11 +408,11 @@ dotraplinkage void do_bounds(struct pt_r
>  	 */
>  	switch (bndcsr->bndstatus & MPX_BNDSTA_ERROR_CODE) {
>  	case 2:	/* Bound directory has invalid entry. */
> -		if (mpx_handle_bd_fault(xsave_buf))
> +		if (mpx_handle_bd_fault(tsk))
>  			goto exit_trap;
>  		break; /* Success, it was handled */
>  	case 1: /* Bound violation. */
> -		info = mpx_generate_siginfo(regs, xsave_buf);
> +		info = mpx_generate_siginfo(regs, tsk);
>  		if (IS_ERR(info)) {
>  			/*
>  			 * We failed to decode the MPX instruction.  Act as if
> diff -puN arch/x86/mm/mpx.c~use-new-tsk_get_xsave_addr arch/x86/mm/mpx.c
> --- a/arch/x86/mm/mpx.c~use-new-tsk_get_xsave_addr	2015-05-08 11:46:11.388599581 -0700
> +++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:11.393599807 -0700
> @@ -273,7 +273,7 @@ bad_opcode:
>   * The caller is expected to kfree() the returned siginfo_t.
>   */
>  siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
> -				struct xsave_struct *xsave_buf)
> +				struct task_struct *tsk)

Looking at the implementation makes me wonder about the extra *tsk
argument some more ....

>  {
>  	struct bndreg *bndregs, *bndreg;
>  	siginfo_t *info = NULL;
> @@ -295,8 +295,8 @@ siginfo_t *mpx_generate_siginfo(struct p
>  		err = -EINVAL;
>  		goto err_out;
>  	}
> -	/* get the bndregs _area_ of the xsave structure */
> -	bndregs = get_xsave_addr(xsave_buf, XSTATE_BNDREGS);
> +	/* get bndregs field from urrent task's xsave area */

  urrent?

> +	bndregs = get_xsave_field(XSTATE_BNDREGS);
>  	if (!bndregs) {
>  		err = -EINVAL;
>  		goto err_out;

Still no user of *tsk ....

> @@ -358,8 +358,7 @@ static __user void *task_get_bounds_dir(
> -int mpx_handle_bd_fault(struct xsave_struct *xsave_buf)
> +int mpx_handle_bd_fault(struct task_struct *tsk)
>  {
>  	/*
>  	 * Userspace never asked us to manage the bounds tables,
> @@ -535,7 +534,7 @@ int mpx_handle_bd_fault(struct xsave_str
>  	if (!kernel_managing_mpx_tables(current->mm))
>  		return -EINVAL;
>  
> -	if (do_mpx_bt_fault(xsave_buf)) {
> +	if (do_mpx_bt_fault(tsk)) {

Same problem actually with do_mpx_bt_fault().

Thanks,

	tglx

Re: [PATCH 03/19] x86, mpx: use new tsk_get_xsave_addr()

[Dave Hansen]

On 05/18/2015 01:36 PM, Thomas Gleixner wrote:
>> >  #ifdef CONFIG_X86_INTEL_MPX
>> >  siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
>> > -				struct xsave_struct *xsave_buf);
>> > -int mpx_handle_bd_fault(struct xsave_struct *xsave_buf);
>> > +				struct task_struct *tsk);
>> > +int mpx_handle_bd_fault(struct task_struct *tsk);
> So you still keep *tsk and remove it in the next patch. I guess either
> ordering has its value, so no problem to do it this way.

I agree that this looks a bit goofy.

Originally, this patch just passed around 'tsk' instead of 'xsave_buf'.
 But I realized we could go a step further.

The way it stands, it is bisectable and been built in this configuration
for a month or two.  I'd really like to keep it this way if possible,
even though it looks a bit goofy.

[PATCH 04/19] x86, mpx: cleanup: do not pass task around when unnecessary

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The MPX code can largely only work on the current task.  You can
not, for instance, enable MPX management in another process or
thread.  You can also not handle a fault for another process
or thread.

Despite this, we pass a task_struct around prolifically.  This
patch removes all of the task struct passing for code paths
where the code can not deal with another task (which turns out
to be all of them).

This has no functional changes.  It's just a cleanup.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: bp@alien8.de
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
---

 b/arch/x86/include/asm/mpx.h       |   10 ++++------
 b/arch/x86/include/asm/processor.h |   12 ++++++------
 b/arch/x86/kernel/traps.c          |    5 ++---
 b/arch/x86/mm/mpx.c                |   19 +++++++++----------
 b/kernel/sys.c                     |    8 ++++----
 5 files changed, 25 insertions(+), 29 deletions(-)

diff -puN arch/x86/include/asm/mpx.h~x86-mpx-dont-pass-current-around arch/x86/include/asm/mpx.h
--- a/arch/x86/include/asm/mpx.h~x86-mpx-dont-pass-current-around	2015-05-08 11:46:11.822619156 -0700
+++ b/arch/x86/include/asm/mpx.h	2015-05-08 11:46:11.833619653 -0700
@@ -59,9 +59,8 @@
 		MPX_BT_ENTRY_MASK) << MPX_BT_ENTRY_SHIFT)
 
 #ifdef CONFIG_X86_INTEL_MPX
-siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-				struct task_struct *tsk);
-int mpx_handle_bd_fault(struct task_struct *tsk);
+siginfo_t *mpx_generate_siginfo(struct pt_regs *regs);
+int mpx_handle_bd_fault(void);
 static inline int kernel_managing_mpx_tables(struct mm_struct *mm)
 {
 	return (mm->bd_addr != MPX_INVALID_BOUNDS_DIR);
@@ -77,12 +76,11 @@ static inline void mpx_mm_init(struct mm
 void mpx_notify_unmap(struct mm_struct *mm, struct vm_area_struct *vma,
 		      unsigned long start, unsigned long end);
 #else
-static inline siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-					      struct task_struct *tsk)
+static inline siginfo_t *mpx_generate_siginfo(struct pt_regs *regs)
 {
 	return NULL;
 }
-static inline int mpx_handle_bd_fault(struct task_struct *tsk)
+static inline int mpx_handle_bd_fault(void)
 {
 	return -EINVAL;
 }
diff -puN arch/x86/include/asm/processor.h~x86-mpx-dont-pass-current-around arch/x86/include/asm/processor.h
--- a/arch/x86/include/asm/processor.h~x86-mpx-dont-pass-current-around	2015-05-08 11:46:11.823619202 -0700
+++ b/arch/x86/include/asm/processor.h	2015-05-08 11:46:11.833619653 -0700
@@ -928,18 +928,18 @@ extern int get_tsc_mode(unsigned long ad
 extern int set_tsc_mode(unsigned int val);
 
 /* Register/unregister a process' MPX related resource */
-#define MPX_ENABLE_MANAGEMENT(tsk)	mpx_enable_management((tsk))
-#define MPX_DISABLE_MANAGEMENT(tsk)	mpx_disable_management((tsk))
+#define MPX_ENABLE_MANAGEMENT()	mpx_enable_management()
+#define MPX_DISABLE_MANAGEMENT()	mpx_disable_management()
 
 #ifdef CONFIG_X86_INTEL_MPX
-extern int mpx_enable_management(struct task_struct *tsk);
-extern int mpx_disable_management(struct task_struct *tsk);
+extern int mpx_enable_management(void);
+extern int mpx_disable_management(void);
 #else
-static inline int mpx_enable_management(struct task_struct *tsk)
+static inline int mpx_enable_management(void)
 {
 	return -EINVAL;
 }
-static inline int mpx_disable_management(struct task_struct *tsk)
+static inline int mpx_disable_management(void)
 {
 	return -EINVAL;
 }
diff -puN arch/x86/kernel/traps.c~x86-mpx-dont-pass-current-around arch/x86/kernel/traps.c
--- a/arch/x86/kernel/traps.c~x86-mpx-dont-pass-current-around	2015-05-08 11:46:11.825619292 -0700
+++ b/arch/x86/kernel/traps.c	2015-05-08 11:46:11.834619698 -0700
@@ -372,7 +372,6 @@ dotraplinkage void do_double_fault(struc
 
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 {
-	struct task_struct *tsk = current;
 	enum ctx_state prev_state;
 	struct bndcsr *bndcsr;
 	siginfo_t *info;
@@ -408,11 +407,11 @@ dotraplinkage void do_bounds(struct pt_r
 	 */
 	switch (bndcsr->bndstatus & MPX_BNDSTA_ERROR_CODE) {
 	case 2:	/* Bound directory has invalid entry. */
-		if (mpx_handle_bd_fault(tsk))
+		if (mpx_handle_bd_fault())
 			goto exit_trap;
 		break; /* Success, it was handled */
 	case 1: /* Bound violation. */
-		info = mpx_generate_siginfo(regs, tsk);
+		info = mpx_generate_siginfo(regs);
 		if (IS_ERR(info)) {
 			/*
 			 * We failed to decode the MPX instruction.  Act as if
diff -puN arch/x86/mm/mpx.c~x86-mpx-dont-pass-current-around arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-dont-pass-current-around	2015-05-08 11:46:11.827619382 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:11.834619698 -0700
@@ -272,8 +272,7 @@ bad_opcode:
  *
  * The caller is expected to kfree() the returned siginfo_t.
  */
-siginfo_t *mpx_generate_siginfo(struct pt_regs *regs,
-				struct task_struct *tsk)
+siginfo_t *mpx_generate_siginfo(struct pt_regs *regs)
 {
 	struct bndreg *bndregs, *bndreg;
 	siginfo_t *info = NULL;
@@ -341,7 +340,7 @@ err_out:
 	return ERR_PTR(err);
 }
 
-static __user void *task_get_bounds_dir(struct task_struct *tsk)
+static __user void *mpx_get_bounds_dir(void)
 {
 	struct bndcsr *bndcsr;
 
@@ -377,10 +376,10 @@ static __user void *task_get_bounds_dir(
 		(bndcsr->bndcfgu & MPX_BNDCFG_ADDR_MASK);
 }
 
-int mpx_enable_management(struct task_struct *tsk)
+int mpx_enable_management(void)
 {
 	void __user *bd_base = MPX_INVALID_BOUNDS_DIR;
-	struct mm_struct *mm = tsk->mm;
+	struct mm_struct *mm = current->mm;
 	int ret = 0;
 
 	/*
@@ -393,7 +392,7 @@ int mpx_enable_management(struct task_st
 	 * directory here means that we do not have to do xsave in the
 	 * unmap path; we can just use mm->bd_addr instead.
 	 */
-	bd_base = task_get_bounds_dir(tsk);
+	bd_base = mpx_get_bounds_dir();
 	down_write(&mm->mmap_sem);
 	mm->bd_addr = bd_base;
 	if (mm->bd_addr == MPX_INVALID_BOUNDS_DIR)
@@ -403,7 +402,7 @@ int mpx_enable_management(struct task_st
 	return ret;
 }
 
-int mpx_disable_management(struct task_struct *tsk)
+int mpx_disable_management(void)
 {
 	struct mm_struct *mm = current->mm;
 
@@ -497,7 +496,7 @@ out_unmap:
  * bound table is 16KB. With 64-bit mode, the size of BD is 2GB,
  * and the size of each bound table is 4MB.
  */
-static int do_mpx_bt_fault(struct task_struct *tsk)
+static int do_mpx_bt_fault(void)
 {
 	unsigned long bd_entry, bd_base;
 	struct bndcsr *bndcsr;
@@ -525,7 +524,7 @@ static int do_mpx_bt_fault(struct task_s
 	return allocate_bt((long __user *)bd_entry);
 }
 
-int mpx_handle_bd_fault(struct task_struct *tsk)
+int mpx_handle_bd_fault(void)
 {
 	/*
 	 * Userspace never asked us to manage the bounds tables,
@@ -534,7 +533,7 @@ int mpx_handle_bd_fault(struct task_stru
 	if (!kernel_managing_mpx_tables(current->mm))
 		return -EINVAL;
 
-	if (do_mpx_bt_fault(tsk)) {
+	if (do_mpx_bt_fault()) {
 		force_sig(SIGSEGV, current);
 		/*
 		 * The force_sig() is essentially "handling" this
diff -puN kernel/sys.c~x86-mpx-dont-pass-current-around kernel/sys.c
--- a/kernel/sys.c~x86-mpx-dont-pass-current-around	2015-05-08 11:46:11.829619472 -0700
+++ b/kernel/sys.c	2015-05-08 11:46:11.835619743 -0700
@@ -92,10 +92,10 @@
 # define SET_TSC_CTL(a)		(-EINVAL)
 #endif
 #ifndef MPX_ENABLE_MANAGEMENT
-# define MPX_ENABLE_MANAGEMENT(a)	(-EINVAL)
+# define MPX_ENABLE_MANAGEMENT()	(-EINVAL)
 #endif
 #ifndef MPX_DISABLE_MANAGEMENT
-# define MPX_DISABLE_MANAGEMENT(a)	(-EINVAL)
+# define MPX_DISABLE_MANAGEMENT()	(-EINVAL)
 #endif
 #ifndef GET_FP_MODE
 # define GET_FP_MODE(a)		(-EINVAL)
@@ -2230,12 +2230,12 @@ SYSCALL_DEFINE5(prctl, int, option, unsi
 	case PR_MPX_ENABLE_MANAGEMENT:
 		if (arg2 || arg3 || arg4 || arg5)
 			return -EINVAL;
-		error = MPX_ENABLE_MANAGEMENT(me);
+		error = MPX_ENABLE_MANAGEMENT();
 		break;
 	case PR_MPX_DISABLE_MANAGEMENT:
 		if (arg2 || arg3 || arg4 || arg5)
 			return -EINVAL;
-		error = MPX_DISABLE_MANAGEMENT(me);
+		error = MPX_DISABLE_MANAGEMENT();
 		break;
 	case PR_SET_FP_MODE:
 		error = SET_FP_MODE(me, arg2);
_

Re: [PATCH 04/19] x86, mpx: cleanup: do not pass task around when unnecessary

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> The MPX code can largely only work on the current task.  You can

s/largely// ?

> not, for instance, enable MPX management in another process or
> thread.  You can also not handle a fault for another process
> or thread.
> 
> Despite this, we pass a task_struct around prolifically.  This
> patch removes all of the task struct passing for code paths
> where the code can not deal with another task (which turns out
> to be all of them).
> 
> This has no functional changes.  It's just a cleanup.

See also reply to previous patch.

Thanks,

	tglx

[PATCH 05/19] x86, mpx: remove redundant MPX_BNDCFG_ADDR_MASK

[Dave Hansen]

From: Qiaowei Ren <qiaowei.ren@intel.com>

MPX_BNDCFG_ADDR_MASK is defined two times, so this patch removes
redundant one.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/mpx.h |    1 -
 1 file changed, 1 deletion(-)

diff -puN arch/x86/include/asm/mpx.h~0001-x86-mpx-remove-redundant-MPX_BNDCFG_ADDR_MASK arch/x86/include/asm/mpx.h
--- a/arch/x86/include/asm/mpx.h~0001-x86-mpx-remove-redundant-MPX_BNDCFG_ADDR_MASK	2015-05-08 11:46:12.307641032 -0700
+++ b/arch/x86/include/asm/mpx.h	2015-05-08 11:46:12.310641167 -0700
@@ -45,7 +45,6 @@
 #define MPX_BNDSTA_TAIL		2
 #define MPX_BNDCFG_TAIL		12
 #define MPX_BNDSTA_ADDR_MASK	(~((1UL<<MPX_BNDSTA_TAIL)-1))
-#define MPX_BNDCFG_ADDR_MASK	(~((1UL<<MPX_BNDCFG_TAIL)-1))
 #define MPX_BT_ADDR_MASK	(~((1UL<<MPX_BD_ENTRY_TAIL)-1))
 
 #define MPX_BNDCFG_ADDR_MASK	(~((1UL<<MPX_BNDCFG_TAIL)-1))
_

Re: [PATCH 05/19] x86, mpx: remove redundant MPX_BNDCFG_ADDR_MASK

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:

> 
> From: Qiaowei Ren <qiaowei.ren@intel.com>
> 
> MPX_BNDCFG_ADDR_MASK is defined two times, so this patch removes
> redundant one.
> 
> Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 06/19] x86, mpx: we do not allocate the bounds directory

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The comment and code here are confusing.  We do not currently
allocate the bounds directory in the kernel.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff -puN arch/x86/mm/mpx.c~x86-mpx-we-do-not-allocate-the-bounds-directory arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-we-do-not-allocate-the-bounds-directory	2015-05-08 11:46:12.671657450 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:12.675657630 -0700
@@ -47,8 +47,8 @@ static unsigned long mpx_mmap(unsigned l
 	vm_flags_t vm_flags;
 	struct vm_area_struct *vma;
 
-	/* Only bounds table and bounds directory can be allocated here */
-	if (len != MPX_BD_SIZE_BYTES && len != MPX_BT_SIZE_BYTES)
+	/* Only bounds table can be allocated here */
+	if (len != MPX_BT_SIZE_BYTES)
 		return -EINVAL;
 
 	down_write(&mm->mmap_sem);
_

Re: [PATCH 06/19] x86, mpx: we do not allocate the bounds directory

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:

> Subject: x86, mpx: we do not allocate the bounds directory

led me to expect, that we actually do something like this.

  x86, mpx: Restrict mmap size check to bounds tables

might be more accurate.

> 
> From: Dave Hansen <dave.hansen@linux.intel.com>
> 
> The comment and code here are confusing.  We do not currently
> allocate the bounds directory in the kernel.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Otherwise

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 07/19] x86, mpx: boot-time disable

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

MPX has the _potential_ to cause some issues.  Say part of your init
system tried to protect one of its components from buffer overflows
with MPX.  If there were a false positive, it's possible that MPX
could keep a system from booting.

MPX could also potentially cause performance issues since it is
present in hot paths like the unmap path.

Allow it to be disabled at boot time.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/Documentation/kernel-parameters.txt |    4 ++++
 b/arch/x86/kernel/cpu/common.c        |   16 ++++++++++++++++
 2 files changed, 20 insertions(+)

diff -puN arch/x86/kernel/cpu/common.c~x86-mpx-disable-boot-time arch/x86/kernel/cpu/common.c
--- a/arch/x86/kernel/cpu/common.c~x86-mpx-disable-boot-time	2015-05-08 11:46:13.048674454 -0700
+++ b/arch/x86/kernel/cpu/common.c	2015-05-08 11:46:13.053674679 -0700
@@ -172,6 +172,22 @@ static int __init x86_xsaves_setup(char
 }
 __setup("noxsaves", x86_xsaves_setup);
 
+static int __init x86_mpx_setup(char *s)
+{
+	/* require an exact match without trailing characters */
+	if (strlen(s))
+		return 0;
+
+	/* do not emit a message if the feature is not present */
+	if (!boot_cpu_has(X86_FEATURE_MPX))
+		return 1;
+
+	setup_clear_cpu_cap(X86_FEATURE_MPX);
+	pr_info("nompx: Intel Memory Protection Extensions (MPX) disabled\n");
+	return 1;
+}
+__setup("nompx", x86_mpx_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override = -1;
 static int disable_x86_serial_nr = 1;
diff -puN Documentation/kernel-parameters.txt~x86-mpx-disable-boot-time Documentation/kernel-parameters.txt
--- a/Documentation/kernel-parameters.txt~x86-mpx-disable-boot-time	2015-05-08 11:46:13.050674544 -0700
+++ b/Documentation/kernel-parameters.txt	2015-05-08 11:46:13.054674724 -0700
@@ -937,6 +937,10 @@ bytes respectively. Such letter suffixes
 			Enable debug messages at boot time.  See
 			Documentation/dynamic-debug-howto.txt for details.
 
+	nompx		[X86] Disables Intel Memory Protection Extensions.
+			See Documentation/x86/intel_mpx.txt for more
+			information about the feature.
+
 	eagerfpu=	[X86]
 			on	enable eager fpu restore
 			off	disable eager fpu restore
_

Re: [PATCH 07/19] x86, mpx: boot-time disable

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> MPX has the _potential_ to cause some issues.  Say part of your init
> system tried to protect one of its components from buffer overflows
> with MPX.  If there were a false positive, it's possible that MPX
> could keep a system from booting.
> 
> MPX could also potentially cause performance issues since it is
> present in hot paths like the unmap path.
> 
> Allow it to be disabled at boot time.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 08/19] x86, mpx: trace #BR exceptions

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

This is the first in a series of MPX tracing patches.
I've found these extremely useful in the process of
debugging applications and the kernel code itself.

This exception hooks in to the bounds (#BR) exception
very early and allows capturing the key registers which
would influence how the exception is handled.

Note that bndcfgu/bndstatus are technically still
64-bit registers even in 32-bit mode.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/trace/mpx.h |   49 +++++++++++++++++++++++++++++++++++++
 b/arch/x86/kernel/traps.c          |    2 +
 b/arch/x86/mm/mpx.c                |    3 ++
 3 files changed, 54 insertions(+)

diff -puN /dev/null arch/x86/include/asm/trace/mpx.h
--- /dev/null	2015-05-06 22:34:35.845652580 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-08 11:46:14.227727631 -0700
@@ -0,0 +1,49 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mpx
+
+#if !defined(_TRACE_MPX_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MPX_H
+
+#include <linux/tracepoint.h>
+
+#ifdef CONFIG_X86_INTEL_MPX
+
+TRACE_EVENT(bounds_exception_mpx,
+
+	TP_PROTO(struct bndcsr *bndcsr),
+	TP_ARGS(bndcsr),
+
+	TP_STRUCT__entry(
+		__field(u64, bndcfgu)
+		__field(u64, bndstatus)
+	),
+
+	TP_fast_assign(
+		__entry->bndcfgu   = bndcsr->bndcfgu;
+		__entry->bndstatus = bndcsr->bndstatus;
+	),
+
+	TP_printk("bndcfgu:0x%llx bndstatus:0x%llx",
+		__entry->bndcfgu,
+		__entry->bndstatus)
+);
+
+#else
+
+/*
+ * This gets used outside of MPX-specific code, so we need a stub.
+ */
+static inline void trace_bounds_exception_mpx(struct bndcsr *bndcsr)
+{
+}
+
+#endif /* CONFIG_X86_INTEL_MPX */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH asm/trace/
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE mpx
+#endif /* _TRACE_MPX_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff -puN arch/x86/kernel/traps.c~x86-br-exception-trace arch/x86/kernel/traps.c
--- a/arch/x86/kernel/traps.c~x86-br-exception-trace	2015-05-08 11:46:14.222727406 -0700
+++ b/arch/x86/kernel/traps.c	2015-05-08 11:46:14.228727677 -0700
@@ -61,6 +61,7 @@
 #include <asm/mach_traps.h>
 #include <asm/alternative.h>
 #include <asm/mpx.h>
+#include <asm/trace/mpx.h>
 #include <asm/xsave.h>
 
 #ifdef CONFIG_X86_64
@@ -400,6 +401,7 @@ dotraplinkage void do_bounds(struct pt_r
 	if (!bndcsr)
 		goto exit_trap;
 
+	trace_bounds_exception_mpx(bndcsr);
 	/*
 	 * The error code field of the BNDSTATUS register communicates status
 	 * information of a bound range exception #BR or operation involving
diff -puN arch/x86/mm/mpx.c~x86-br-exception-trace arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-br-exception-trace	2015-05-08 11:46:14.224727496 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:14.228727677 -0700
@@ -18,6 +18,9 @@
 #include <asm/processor.h>
 #include <asm/fpu-internal.h>
 
+#define CREATE_TRACE_POINTS
+#include <asm/trace/mpx.h>
+
 static const char *mpx_mapping_name(struct vm_area_struct *vma)
 {
 	return "[mpx]";
_

Re: [PATCH 08/19] x86, mpx: trace #BR exceptions

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> This is the first in a series of MPX tracing patches.
> I've found these extremely useful in the process of
> debugging applications and the kernel code itself.
> 
> This exception hooks in to the bounds (#BR) exception
> very early and allows capturing the key registers which
> would influence how the exception is handled.
> 
> Note that bndcfgu/bndstatus are technically still
> 64-bit registers even in 32-bit mode.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 10/19] x86, mpx: trace ranged MPX operations

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

trace when MPX is zapping pages:

When MPX can not free an entire bounds table, it will instead
try to zap unused parts of a bounds table to free the backing
memory.  This decreases RSS (resident set size) without
decreasing the virtual space allocated for bounds tables.

trace attempts to find bounds tables:

This event traces any time we go looking to unmap a bounds table
for a given virtual address range.  This is useful to ensure
that the kernel actually "tried" to free a bounds table versus
times it succeeded.

It might try and fail if it realized that a table was shared
with an adjacent VMA which is not being unmapped.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/trace/mpx.h |   32 ++++++++++++++++++++++++++++++++
 b/arch/x86/mm/mpx.c                |    2 ++
 2 files changed, 34 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~mpx-trace_unmap_zap arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~mpx-trace_unmap_zap	2015-05-08 11:46:15.025763624 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-08 11:46:15.029763805 -0700
@@ -53,6 +53,38 @@ TRACE_EVENT(bounds_exception_mpx,
 		__entry->bndstatus)
 );
 
+DECLARE_EVENT_CLASS(mpx_range_trace,
+
+	TP_PROTO(unsigned long start,
+		 unsigned long end),
+	TP_ARGS(start, end),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, start)
+		__field(unsigned long, end)
+	),
+
+	TP_fast_assign(
+		__entry->start = start;
+		__entry->end   = end;
+	),
+
+	TP_printk("[0x%p:0x%p]",
+		(void *)__entry->start,
+		(void *)__entry->end
+	)
+);
+
+DEFINE_EVENT(mpx_range_trace, mpx_unmap_zap,
+	TP_PROTO(unsigned long start, unsigned long end),
+	TP_ARGS(start, end)
+);
+
+DEFINE_EVENT(mpx_range_trace, mpx_unmap_search,
+	TP_PROTO(unsigned long start, unsigned long end),
+	TP_ARGS(start, end)
+);
+
 #else
 
 /*
diff -puN arch/x86/mm/mpx.c~mpx-trace_unmap_zap arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~mpx-trace_unmap_zap	2015-05-08 11:46:15.026763669 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:15.030763850 -0700
@@ -668,6 +668,7 @@ static int zap_bt_entries(struct mm_stru
 
 		len = min(vma->vm_end, end) - addr;
 		zap_page_range(vma, addr, len, NULL);
+		trace_mpx_unmap_zap(addr, addr+len);
 
 		vma = vma->vm_next;
 		addr = vma->vm_start;
@@ -840,6 +841,7 @@ static int mpx_unmap_tables(struct mm_st
 	long __user *bd_entry, *bde_start, *bde_end;
 	unsigned long bt_addr;
 
+	trace_mpx_unmap_search(start, end);
 	/*
 	 * "Edge" bounds tables are those which are being used by the region
 	 * (start -> end), but that may be shared with adjacent areas.  If they
_

Re: [PATCH 10/19] x86, mpx: trace ranged MPX operations

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> When MPX can not free an entire bounds table, it will instead
> try to zap unused parts of a bounds table to free the backing
> memory.  This decreases RSS (resident set size) without
> decreasing the virtual space allocated for bounds tables.
> 
> trace attempts to find bounds tables:

My first reading was: "The trace attempts to find bounds tables"

"Trace the attempts to find bounds tables" is what you actually mean.

> This event traces any time we go looking to unmap a bounds table

You have two events ....

> for a given virtual address range.  This is useful to ensure
> that the kernel actually "tried" to free a bounds table versus
> times it succeeded.
> 
> It might try and fail if it realized that a table was shared
> with an adjacent VMA which is not being unmapped.

So rewording that would probably create a useful changelog.

Thanks,

	tglx

[PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

There are two basic things that can happen as the result of
a bounds exception (#BR):

	1. We allocate a new bounds table
	2. We pass up a bounds exception to userspace.

This patch adds a trace point for the case where we are
passing the exception up to userspace with a signal.

We are also explicit that we're printing out the inverse of
the 'upper' that we encounter.  If you want to filter, for
instance, you need to ~ the value first.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/trace/mpx.h |   25 +++++++++++++++++++++++++
 b/arch/x86/mm/mpx.c                |    1 +
 2 files changed, 26 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1 arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1	2015-05-08 11:46:14.657747026 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-08 11:46:14.662747252 -0700
@@ -8,6 +8,31 @@
 
 #ifdef CONFIG_X86_INTEL_MPX
 
+TRACE_EVENT(mpx_bounds_register_exception,
+
+	TP_PROTO(void *addr_referenced,
+		 struct bndreg *bndreg),
+	TP_ARGS(addr_referenced, bndreg),
+
+	TP_STRUCT__entry(
+		__field(void *, addr_referenced)
+		__field(u64, lower_bound)
+		__field(u64, upper_bound)
+	),
+
+	TP_fast_assign(
+		__entry->addr_referenced = addr_referenced;
+		__entry->lower_bound = bndreg->lower_bound;
+		__entry->upper_bound = bndreg->upper_bound;
+	),
+
+	TP_printk("address referenced: 0x%p bounds: lower: 0x%llx ~upper: 0x%llx",
+		__entry->addr_referenced,
+		__entry->lower_bound,
+		~__entry->upper_bound
+	)
+);
+
 TRACE_EVENT(bounds_exception_mpx,
 
 	TP_PROTO(struct bndcsr *bndcsr),
diff -puN arch/x86/mm/mpx.c~x86-mpx-trace-1 arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-trace-1	2015-05-08 11:46:14.658747071 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:14.662747252 -0700
@@ -336,6 +336,7 @@ siginfo_t *mpx_generate_siginfo(struct p
 		err = -EINVAL;
 		goto err_out;
 	}
+	trace_mpx_bounds_register_exception(info->si_addr, bndreg);
 	return info;
 err_out:
 	/* info might be NULL, but kfree() handles that */
_

Re: [PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> This patch adds a trace point for the case where we are
> passing the exception up to userspace with a signal.
> 
> We are also explicit that we're printing out the inverse of
> the 'upper' that we encounter.  If you want to filter, for
> instance, you need to ~ the value first.

Confused. What is the point of printing the complement of upper?

Lets assume that my boundaries are: lower = 0x10000 upper = 0x1ffff

So the trace will tell me:

  pointer: 0x40000 lower: 0x10000 ~upper: 0xfffffffffff70000

Even if the upper bound is not inclusive (and I can't be bothered to
look it up right now), i.e. in the example above upper = 0x20000 we
would get

  pointer: 0x40000 lower: 0x10000 ~upper: 0xfffffffffffdffff

I have a hard time to understand the value of this over:

  pointer: 0x40000 lower: 0x10000 upper: 0x20000

Thanks,

	tglx

Re: [PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Dave Hansen]

On 05/18/2015 01:58 PM, Thomas Gleixner wrote:
> On Fri, 8 May 2015, Dave Hansen wrote:
>> > This patch adds a trace point for the case where we are
>> > passing the exception up to userspace with a signal.
>> > 
>> > We are also explicit that we're printing out the inverse of
>> > the 'upper' that we encounter.  If you want to filter, for
>> > instance, you need to ~ the value first.
> Confused. What is the point of printing the complement of upper?

If a pointer's range is

	0x1000 -> 0x2000

it is stored in the bounds table as (32-bits here for brevity):

	lower: 0x00001000
	upper: 0xffffdfff

That is so that an all 0's entry:

	lower: 0x00000000
	upper: 0x00000000

corresponds to the "init" bounds which store a *range* of:

	0x00000000 -> 0xffffffff

The 'upper' stored in the table is gibberish to print by itself, so we
print ~upper to get the *actual*, logical value.

Re: [PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Thomas Gleixner]

On Mon, 18 May 2015, Dave Hansen wrote:

> On 05/18/2015 01:58 PM, Thomas Gleixner wrote:
> > On Fri, 8 May 2015, Dave Hansen wrote:
> >> > This patch adds a trace point for the case where we are
> >> > passing the exception up to userspace with a signal.
> >> > 
> >> > We are also explicit that we're printing out the inverse of
> >> > the 'upper' that we encounter.  If you want to filter, for
> >> > instance, you need to ~ the value first.
> > Confused. What is the point of printing the complement of upper?
> 
> If a pointer's range is
> 
> 	0x1000 -> 0x2000
> 
> it is stored in the bounds table as (32-bits here for brevity):
> 
> 	lower: 0x00001000
> 	upper: 0xffffdfff
> 
> That is so that an all 0's entry:
> 
> 	lower: 0x00000000
> 	upper: 0x00000000
> 
> corresponds to the "init" bounds which store a *range* of:
> 
> 	0x00000000 -> 0xffffffff
> 
> The 'upper' stored in the table is gibberish to print by itself, so we
> print ~upper to get the *actual*, logical value.

Some comment in the code and the changelog might be helpful then :)

Thanks,

	tglx

[PATCH 11/19] x86, mpx: trace allocation of new bounds tables

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

Bounds tables are a significant consumer of memory.  It is important
to know when they are being allocated.  Add a trace point to trace
whenever an allocation occurs and also its virtual address.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/trace/mpx.h |   16 ++++++++++++++++
 b/arch/x86/mm/mpx.c                |    1 +
 2 files changed, 17 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~trace_mpx_new_bounds_table arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~trace_mpx_new_bounds_table	2015-05-08 11:46:15.388779997 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-08 11:46:15.393780223 -0700
@@ -85,6 +85,22 @@ DEFINE_EVENT(mpx_range_trace, mpx_unmap_
 	TP_ARGS(start, end)
 );
 
+TRACE_EVENT(mpx_new_bounds_table,
+
+	TP_PROTO(unsigned long table_vaddr),
+	TP_ARGS(table_vaddr),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, table_vaddr)
+	),
+
+	TP_fast_assign(
+		__entry->table_vaddr = table_vaddr;
+	),
+
+	TP_printk("table vaddr:%p", (void *)__entry->table_vaddr)
+);
+
 #else
 
 /*
diff -puN arch/x86/mm/mpx.c~trace_mpx_new_bounds_table arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~trace_mpx_new_bounds_table	2015-05-08 11:46:15.390780087 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:15.394780268 -0700
@@ -483,6 +483,7 @@ static int allocate_bt(long __user *bd_e
 		ret = -EINVAL;
 		goto out_unmap;
 	}
+	trace_mpx_new_bounds_table(bt_addr);
 	return 0;
 out_unmap:
 	vm_munmap(bt_addr & MPX_BT_ADDR_MASK, MPX_BT_SIZE_BYTES);
_

Re: [PATCH 11/19] x86, mpx: trace allocation of new bounds tables

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> Bounds tables are a significant consumer of memory.  It is important
> to know when they are being allocated.  Add a trace point to trace
> whenever an allocation occurs and also its virtual address.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 12/19] x86: make is_64bit_mm() widely available

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The uprobes code has a nice helper, is_64bit_mm(), that consults both
the runtime and compile-time flags for 32-bit support.  Instead of
reinventing the wheel, pull it in to an x86 header so we can use it
for MPX.

I prefer passing the mm around to test_thread_flag(TIF_IA32) because
it makes it explicit where the context is coming from.  It will also
make it easier if we ever need to access the MPX structures from
another process.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
---

 b/arch/x86/include/asm/mmu_context.h |   13 +++++++++++++
 b/arch/x86/kernel/uprobes.c          |   10 +---------
 2 files changed, 14 insertions(+), 9 deletions(-)

diff -puN arch/x86/include/asm/mmu_context.h~x86-make-is_64bit_mm-available arch/x86/include/asm/mmu_context.h
--- a/arch/x86/include/asm/mmu_context.h~x86-make-is_64bit_mm-available	2015-05-08 11:46:15.799798535 -0700
+++ b/arch/x86/include/asm/mmu_context.h	2015-05-08 11:46:15.804798760 -0700
@@ -142,6 +142,19 @@ static inline void arch_exit_mmap(struct
 	paravirt_arch_exit_mmap(mm);
 }
 
+#ifdef CONFIG_X86_64
+static inline bool is_64bit_mm(struct mm_struct *mm)
+{
+	return	!config_enabled(CONFIG_IA32_EMULATION) ||
+		!(mm->context.ia32_compat == TIF_IA32);
+}
+#else
+static inline bool is_64bit_mm(struct mm_struct *mm)
+{
+	return false;
+}
+#endif
+
 static inline void arch_bprm_mm_init(struct mm_struct *mm,
 		struct vm_area_struct *vma)
 {
diff -puN arch/x86/kernel/uprobes.c~x86-make-is_64bit_mm-available arch/x86/kernel/uprobes.c
--- a/arch/x86/kernel/uprobes.c~x86-make-is_64bit_mm-available	2015-05-08 11:46:15.800798580 -0700
+++ b/arch/x86/kernel/uprobes.c	2015-05-08 11:46:15.804798760 -0700
@@ -29,6 +29,7 @@
 #include <linux/kdebug.h>
 #include <asm/processor.h>
 #include <asm/insn.h>
+#include <asm/mmu_context.h>
 
 /* Post-execution fixups. */
 
@@ -312,11 +313,6 @@ static int uprobe_init_insn(struct arch_
 }
 
 #ifdef CONFIG_X86_64
-static inline bool is_64bit_mm(struct mm_struct *mm)
-{
-	return	!config_enabled(CONFIG_IA32_EMULATION) ||
-		!(mm->context.ia32_compat == TIF_IA32);
-}
 /*
  * If arch_uprobe->insn doesn't use rip-relative addressing, return
  * immediately.  Otherwise, rewrite the instruction so that it accesses
@@ -497,10 +493,6 @@ static void riprel_post_xol(struct arch_
 	}
 }
 #else /* 32-bit: */
-static inline bool is_64bit_mm(struct mm_struct *mm)
-{
-	return false;
-}
 /*
  * No RIP-relative addressing on 32-bit
  */
_

Re: [PATCH 12/19] x86: make is_64bit_mm() widely available

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> The uprobes code has a nice helper, is_64bit_mm(), that consults both
> the runtime and compile-time flags for 32-bit support.  Instead of
> reinventing the wheel, pull it in to an x86 header so we can use it
> for MPX.
> 
> I prefer passing the mm around to test_thread_flag(TIF_IA32) because
> it makes it explicit where the context is coming from. 

Ack.

> It will also make it easier if we ever need to access the MPX
> structures from another process.

Do we really want to go there?

Otherwise: Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 14/19] x86, mpx: new directory entry to addr helper

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

Currently, to get from a bounds directory entry to the virtual
address of a bounds table, we simply mask off a few low bits.
However, the set of bits we mask off is different for 32 and
64-bit binaries.

This breaks the operation out in to a helper function and also
adds a temporary variable to store the result until we are
sure we are returning one.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/mpx.h |    1 -
 b/arch/x86/mm/mpx.c          |   41 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 34 insertions(+), 8 deletions(-)

diff -puN arch/x86/include/asm/mpx.h~mpx-new-entry-to-addr-helper arch/x86/include/asm/mpx.h
--- a/arch/x86/include/asm/mpx.h~mpx-new-entry-to-addr-helper	2015-05-08 11:46:16.588834122 -0700
+++ b/arch/x86/include/asm/mpx.h	2015-05-08 11:46:16.593834347 -0700
@@ -45,7 +45,6 @@
 #define MPX_BNDSTA_TAIL		2
 #define MPX_BNDCFG_TAIL		12
 #define MPX_BNDSTA_ADDR_MASK	(~((1UL<<MPX_BNDSTA_TAIL)-1))
-#define MPX_BT_ADDR_MASK	(~((1UL<<MPX_BD_ENTRY_TAIL)-1))
 
 #define MPX_BNDCFG_ADDR_MASK	(~((1UL<<MPX_BNDCFG_TAIL)-1))
 #define MPX_BNDSTA_ERROR_CODE	0x3
diff -puN arch/x86/mm/mpx.c~mpx-new-entry-to-addr-helper arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~mpx-new-entry-to-addr-helper	2015-05-08 11:46:16.590834212 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:16.593834347 -0700
@@ -576,29 +576,55 @@ static int mpx_resolve_fault(long __user
 	return 0;
 }
 
+static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
+		unsigned long bd_entry)
+{
+	unsigned long bt_addr = bd_entry;
+	int align_to_bytes;
+	/*
+	 * Bit 0 in a bt_entry is always the valid bit.
+	 */
+	bt_addr &= ~MPX_BD_ENTRY_VALID_FLAG;
+	/*
+	 * Tables are naturally aligned at 8-byte boundaries
+	 * on 64-bit and 4-byte boundaries on 32-bit.  The
+	 * documentation makes it appear that the low bits
+	 * are ignored by the hardware, so we do the same.
+	 */
+	if (is_64bit_mm(mm))
+		align_to_bytes = 8;
+	else
+		align_to_bytes = 4;
+	bt_addr &= ~(align_to_bytes-1);
+	return bt_addr;
+}
+
 /*
  * Get the base of bounds tables pointed by specific bounds
  * directory entry.
  */
 static int get_bt_addr(struct mm_struct *mm,
-			long __user *bd_entry, unsigned long *bt_addr)
+			long __user *bd_entry_ptr,
+			unsigned long *bt_addr_result)
 {
 	int ret;
 	int valid_bit;
+	unsigned long bd_entry;
+	unsigned long bt_addr;
 
-	if (!access_ok(VERIFY_READ, (bd_entry), sizeof(*bd_entry)))
+	if (!access_ok(VERIFY_READ, (bd_entry_ptr), sizeof(*bd_entry_ptr)))
 		return -EFAULT;
 
 	while (1) {
 		int need_write = 0;
 
 		pagefault_disable();
-		ret = get_user(*bt_addr, bd_entry);
+		ret = get_user(bd_entry, bd_entry_ptr);
 		pagefault_enable();
 		if (!ret)
 			break;
 		if (ret == -EFAULT)
-			ret = mpx_resolve_fault(bd_entry, need_write);
+			ret = mpx_resolve_fault(bd_entry_ptr, need_write);
 		/*
 		 * If we could not resolve the fault, consider it
 		 * userspace's fault and error out.
@@ -607,8 +633,8 @@ static int get_bt_addr(struct mm_struct
 			return ret;
 	}
 
-	valid_bit = *bt_addr & MPX_BD_ENTRY_VALID_FLAG;
-	*bt_addr &= MPX_BT_ADDR_MASK;
+	valid_bit = bd_entry & MPX_BD_ENTRY_VALID_FLAG;
+	bt_addr = mpx_bd_entry_to_bt_addr(mm, bd_entry);
 
 	/*
 	 * When the kernel is managing bounds tables, a bounds directory
@@ -617,7 +643,7 @@ static int get_bt_addr(struct mm_struct
 	 * data in the address field, we know something is wrong. This
 	 * -EINVAL return will cause a SIGSEGV.
 	 */
-	if (!valid_bit && *bt_addr)
+	if (!valid_bit && bt_addr)
 		return -EINVAL;
 	/*
 	 * Do we have an completely zeroed bt entry?  That is OK.  It
@@ -628,6 +654,7 @@ static int get_bt_addr(struct mm_struct
 	if (!valid_bit)
 		return -ENOENT;
 
+	*bt_addr_result = bt_addr;
 	return 0;
 }
 
_

Re: [PATCH 14/19] x86, mpx: new directory entry to addr helper

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> Currently, to get from a bounds directory entry to the virtual
> address of a bounds table, we simply mask off a few low bits.
> However, the set of bits we mask off is different for 32 and
> 64-bit binaries.
> 
> This breaks the operation out in to a helper function and also
> adds a temporary variable to store the result until we are
> sure we are returning one.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

> +static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
> +		unsigned long bd_entry)

Nit: Please adjust the second line so the arguments are horizontally
aligned.

static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
		     			     unsigned long bd_entry)

Aside of that: Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 13/19] x86, mpx: Add temporary variable to reduce masking

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

When we allocate a bounds table, we call mmap(), then add a
"valid" bit to the value before storing it in to the bounds
directory.

If we fail along the way, we go and mask that valid bit
_back_ out.  That seems a little silly, and this makes it
much more clear when we have a plain address versus an
actual table _entry_.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff -puN arch/x86/mm/mpx.c~mpx-remove-unnecessary-masking arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~mpx-remove-unnecessary-masking	2015-05-08 11:46:16.208816982 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:16.212817163 -0700
@@ -429,6 +429,7 @@ static int allocate_bt(long __user *bd_e
 	unsigned long expected_old_val = 0;
 	unsigned long actual_old_val = 0;
 	unsigned long bt_addr;
+	unsigned long bd_new_entry;
 	int ret = 0;
 
 	/*
@@ -441,7 +442,7 @@ static int allocate_bt(long __user *bd_e
 	/*
 	 * Set the valid flag (kinda like _PAGE_PRESENT in a pte)
 	 */
-	bt_addr = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
+	bd_new_entry = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
 
 	/*
 	 * Go poke the address of the new bounds table in to the
@@ -455,7 +456,7 @@ static int allocate_bt(long __user *bd_e
 	 * of the MPX code that have to pagefault_disable().
 	 */
 	ret = user_atomic_cmpxchg_inatomic(&actual_old_val, bd_entry,
-					   expected_old_val, bt_addr);
+					   expected_old_val, bd_new_entry);
 	if (ret)
 		goto out_unmap;
 
@@ -486,7 +487,7 @@ static int allocate_bt(long __user *bd_e
 	trace_mpx_new_bounds_table(bt_addr);
 	return 0;
 out_unmap:
-	vm_munmap(bt_addr & MPX_BT_ADDR_MASK, MPX_BT_SIZE_BYTES);
+	vm_munmap(bt_addr, MPX_BT_SIZE_BYTES);
 	return ret;
 }
 
_

Re: [PATCH 13/19] x86, mpx: Add temporary variable to reduce masking

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> When we allocate a bounds table, we call mmap(), then add a
> "valid" bit to the value before storing it in to the bounds
> directory.
> 
> If we fail along the way, we go and mask that valid bit
> _back_ out.  That seems a little silly, and this makes it
> much more clear when we have a plain address versus an
> actual table _entry_.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 15/19] x86, mpx: do 32-bit-only cmpxchg for 32-bit apps

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

user_atomic_cmpxchg_inatomic() actually looks at sizeof(*ptr) to
figure out how many bytes to copy.  If we run it on a 64-bit
kernel with a 64-bit pointer, it will copy a 64-bit bounds
directory entry.  That's fine, except when we have 32-bit
programs with 32-bit bounds directory entries and we only *want*
32-bits.

This patch breaks the cmpxchg operation out in to its own
function and performs the 32-bit type swizzling in there.

Note, the "64-bit" version of this code _would_ work on a
32-bit-only kernel.  The issue this patch addresses is only for
when the kernel's 'long' is mismatched from the size of the
bounds directory entry of the process we are working on.

The new helper modifies 'actual_old_val' or returns an error.
But gcc doesn't know this, so it warns about 'actual_old_val'
being unused.  Shut it up with an uninitialized_var().

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |   41 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 36 insertions(+), 5 deletions(-)

diff -puN arch/x86/mm/mpx.c~mpx-variable-sized-userspace-pokes arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~mpx-variable-sized-userspace-pokes	2015-05-08 11:46:16.996852524 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:17.000852705 -0700
@@ -419,6 +419,35 @@ int mpx_disable_management(void)
 	return 0;
 }
 
+static int mpx_cmpxchg_bd_entry(struct mm_struct *mm,
+		unsigned long *actual_old_val_ptr, long __user *bd_entry_addr,
+		unsigned long expected_old_val, unsigned long new_bd_entry)
+{
+	int ret;
+	/*
+	 * user_atomic_cmpxchg_inatomic() actually uses sizeof()
+	 * the pointer that we pass to it to figure out how much
+	 * data to cmpxchg.  We have to be careful here not to
+	 * pass a pointer to a 64-bit data type when we only want
+	 * a 32-bit copy.
+	 */
+	if (is_64bit_mm(mm)) {
+		ret = user_atomic_cmpxchg_inatomic(actual_old_val_ptr,
+				bd_entry_addr, expected_old_val, new_bd_entry);
+	} else {
+		u32 uninitialized_var(actual_old_val_32);
+		u32 expected_old_val_32 = expected_old_val;
+		u32 new_bd_entry_32 = new_bd_entry;
+		u32 __user *bd_entry_32 = (u32 __user *)bd_entry_addr;
+		ret = user_atomic_cmpxchg_inatomic(&actual_old_val_32,
+				bd_entry_32, expected_old_val_32,
+				new_bd_entry_32);
+		if (!ret)
+			*actual_old_val_ptr = actual_old_val_32;
+	}
+	return ret;
+}
+
 /*
  * With 32-bit mode, MPX_BT_SIZE_BYTES is 4MB, and the size of each
  * bounds table is 16KB. With 64-bit mode, MPX_BT_SIZE_BYTES is 2GB,
@@ -426,6 +455,7 @@ int mpx_disable_management(void)
  */
 static int allocate_bt(long __user *bd_entry)
 {
+	struct mm_struct *mm = current->mm;
 	unsigned long expected_old_val = 0;
 	unsigned long actual_old_val = 0;
 	unsigned long bt_addr;
@@ -455,8 +485,8 @@ static int allocate_bt(long __user *bd_e
 	 * mmap_sem at this point, unlike some of the other part
 	 * of the MPX code that have to pagefault_disable().
 	 */
-	ret = user_atomic_cmpxchg_inatomic(&actual_old_val, bd_entry,
-					   expected_old_val, bd_new_entry);
+	ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,	bd_entry,
+				   expected_old_val, bd_new_entry);
 	if (ret)
 		goto out_unmap;
 
@@ -710,15 +740,16 @@ static int unmap_single_bt(struct mm_str
 		long __user *bd_entry, unsigned long bt_addr)
 {
 	unsigned long expected_old_val = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
-	unsigned long actual_old_val = 0;
+	unsigned long uninitialized_var(actual_old_val);
 	int ret;
 
 	while (1) {
 		int need_write = 1;
+		unsigned long cleared_bd_entry = 0;
 
 		pagefault_disable();
-		ret = user_atomic_cmpxchg_inatomic(&actual_old_val, bd_entry,
-						   expected_old_val, 0);
+		ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,
+				bd_entry, expected_old_val, cleared_bd_entry);
 		pagefault_enable();
 		if (!ret)
 			break;
_

Re: [PATCH 15/19] x86, mpx: do 32-bit-only cmpxchg for 32-bit apps

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> +static int mpx_cmpxchg_bd_entry(struct mm_struct *mm,
> +		unsigned long *actual_old_val_ptr, long __user *bd_entry_addr,
> +		unsigned long expected_old_val, unsigned long new_bd_entry)

I know that you tried to use descriptive argument names, but the
result is close to camel case argument lists :)

Also why is *bd_entry_addr a long? Shouldn't that be unsigned long?

static int mpx_cmpxchg_bd_entry(struct mm_struct *mm,
       	   			unsigned long __user *addr,
				unsigned long oldval, unsigned long newval,
				unsigned long *curval)

or something like that should be sufficient, methinks.

> +{
> +	int ret;
> +	/*
> +	 * user_atomic_cmpxchg_inatomic() actually uses sizeof()
> +	 * the pointer that we pass to it to figure out how much
> +	 * data to cmpxchg.  We have to be careful here not to
> +	 * pass a pointer to a 64-bit data type when we only want
> +	 * a 32-bit copy.
> +	 */
> +	if (is_64bit_mm(mm)) {
> +		ret = user_atomic_cmpxchg_inatomic(actual_old_val_ptr,
> +				bd_entry_addr, expected_old_val, new_bd_entry);
> +	} else {
> +		u32 uninitialized_var(actual_old_val_32);
> +		u32 expected_old_val_32 = expected_old_val;
> +		u32 new_bd_entry_32 = new_bd_entry;
> +		u32 __user *bd_entry_32 = (u32 __user *)bd_entry_addr;

Newline between variables and code please.

> +		ret = user_atomic_cmpxchg_inatomic(&actual_old_val_32,
> +				bd_entry_32, expected_old_val_32,
> +				new_bd_entry_32);
> +		if (!ret)
> +			*actual_old_val_ptr = actual_old_val_32;

You can update that unconditionally.

Thanks,

	tglx

[PATCH 16/19] x86, mpx: support 32-bit binaries on 64-bit kernel

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

Changes from v20:

 * Fix macro confusion between BD and BT
 * Add accessor for bt_entry_size_bytes()

Right now, the kernel can only switch between 64-bit and 32-bit
binaries at compile time. This patch adds support for 32-bit
binaries on 64-bit kernels when we support ia32 emulation.

We essentially choose which set of table sizes to use when doing
arithmetic for the bounds table calculations.

This also uses a different approach for calculating the table
indexes than before.  I think the new one makes it much more
clear what is going on, and allows us to share more code between
the 32 and 64-bit cases.

Based-on-patch-by: Qiaowei Ren <qiaowei.ren@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/mpx.h |   68 ++++++++--------
 b/arch/x86/mm/mpx.c          |  178 +++++++++++++++++++++++++++++++++++++------
 2 files changed, 191 insertions(+), 55 deletions(-)

diff -puN arch/x86/include/asm/mpx.h~0002-x86-mpx-support-32bit-binaries-on-64bit-kernel arch/x86/include/asm/mpx.h
--- a/arch/x86/include/asm/mpx.h~0002-x86-mpx-support-32bit-binaries-on-64bit-kernel	2015-05-08 11:46:17.394870476 -0700
+++ b/arch/x86/include/asm/mpx.h	2015-05-08 11:46:17.400870746 -0700
@@ -13,49 +13,49 @@
 #define MPX_BNDCFG_ENABLE_FLAG	0x1
 #define MPX_BD_ENTRY_VALID_FLAG	0x1
 
-#ifdef CONFIG_X86_64
-
-/* upper 28 bits [47:20] of the virtual address in 64-bit used to
- * index into bounds directory (BD).
+/*
+ * The upper 28 bits [47:20] of the virtual address in 64-bit
+ * are used to index into bounds directory (BD).
+ *
+ * The directory is 2G (2^31) in size, and with 8-byte entries
+ * it has 2^28 entries.
  */
-#define MPX_BD_ENTRY_OFFSET	28
-#define MPX_BD_ENTRY_SHIFT	3
-/* bits [19:3] of the virtual address in 64-bit used to index into
- * bounds table (BT).
+#define MPX_BD_SIZE_BYTES_64	(1UL<<31)
+/* An entry is a long, so 8 bytes and a shift of 3 */
+#define MPX_BD_ENTRY_BYTES_64	8
+#define MPX_BD_NR_ENTRIES_64	(MPX_BD_SIZE_BYTES_64/MPX_BD_ENTRY_BYTES_64)
+
+/*
+ * The 32-bit directory is 4MB (2^22) in size, and with 4-byte
+ * entries it has 2^20 entries.
  */
-#define MPX_BT_ENTRY_OFFSET	17
-#define MPX_BT_ENTRY_SHIFT	5
-#define MPX_IGN_BITS		3
-#define MPX_BD_ENTRY_TAIL	3
-
-#else
-
-#define MPX_BD_ENTRY_OFFSET	20
-#define MPX_BD_ENTRY_SHIFT	2
-#define MPX_BT_ENTRY_OFFSET	10
-#define MPX_BT_ENTRY_SHIFT	4
-#define MPX_IGN_BITS		2
-#define MPX_BD_ENTRY_TAIL	2
-
-#endif
-
-#define MPX_BD_SIZE_BYTES (1UL<<(MPX_BD_ENTRY_OFFSET+MPX_BD_ENTRY_SHIFT))
-#define MPX_BT_SIZE_BYTES (1UL<<(MPX_BT_ENTRY_OFFSET+MPX_BT_ENTRY_SHIFT))
+#define MPX_BD_SIZE_BYTES_32	(1UL<<22)
+/* An entry is a long, so 4 bytes and a shift of 2 */
+#define MPX_BD_ENTRY_BYTES_32	4
+#define MPX_BD_NR_ENTRIES_32	(MPX_BD_SIZE_BYTES_32/MPX_BD_ENTRY_BYTES_32)
+
+/*
+ * A 64-bit table is 4MB total in size, and an entry is
+ * 4 64-bit pointers in size.
+ */
+#define MPX_BT_SIZE_BYTES_64	(1UL<<22)
+#define MPX_BT_ENTRY_BYTES_64	32
+#define MPX_BT_NR_ENTRIES_64	(MPX_BT_SIZE_BYTES_64/MPX_BT_ENTRY_BYTES_64)
+
+/*
+ * A 32-bit table is 16kB total in size, and an entry is
+ * 4 32-bit pointers in size.
+ */
+#define MPX_BT_SIZE_BYTES_32	(1UL<<14)
+#define MPX_BT_ENTRY_BYTES_32	16
+#define MPX_BT_NR_ENTRIES_32	(MPX_BT_SIZE_BYTES_32/MPX_BT_ENTRY_BYTES_32)
 
 #define MPX_BNDSTA_TAIL		2
 #define MPX_BNDCFG_TAIL		12
 #define MPX_BNDSTA_ADDR_MASK	(~((1UL<<MPX_BNDSTA_TAIL)-1))
-
 #define MPX_BNDCFG_ADDR_MASK	(~((1UL<<MPX_BNDCFG_TAIL)-1))
 #define MPX_BNDSTA_ERROR_CODE	0x3
 
-#define MPX_BD_ENTRY_MASK	((1<<MPX_BD_ENTRY_OFFSET)-1)
-#define MPX_BT_ENTRY_MASK	((1<<MPX_BT_ENTRY_OFFSET)-1)
-#define MPX_GET_BD_ENTRY_OFFSET(addr)	((((addr)>>(MPX_BT_ENTRY_OFFSET+ \
-		MPX_IGN_BITS)) & MPX_BD_ENTRY_MASK) << MPX_BD_ENTRY_SHIFT)
-#define MPX_GET_BT_ENTRY_OFFSET(addr)	((((addr)>>MPX_IGN_BITS) & \
-		MPX_BT_ENTRY_MASK) << MPX_BT_ENTRY_SHIFT)
-
 #ifdef CONFIG_X86_INTEL_MPX
 siginfo_t *mpx_generate_siginfo(struct pt_regs *regs);
 int mpx_handle_bd_fault(void);
diff -puN arch/x86/mm/mpx.c~0002-x86-mpx-support-32bit-binaries-on-64bit-kernel arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~0002-x86-mpx-support-32bit-binaries-on-64bit-kernel	2015-05-08 11:46:17.396870566 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:17.401870792 -0700
@@ -35,6 +35,22 @@ static int is_mpx_vma(struct vm_area_str
 	return (vma->vm_ops == &mpx_vma_ops);
 }
 
+static inline unsigned long mpx_bd_size_bytes(struct mm_struct *mm)
+{
+	if (is_64bit_mm(mm))
+		return MPX_BD_SIZE_BYTES_64;
+	else
+		return MPX_BD_SIZE_BYTES_32;
+}
+
+static inline unsigned long mpx_bt_size_bytes(struct mm_struct *mm)
+{
+	if (is_64bit_mm(mm))
+		return MPX_BT_SIZE_BYTES_64;
+	else
+		return MPX_BT_SIZE_BYTES_32;
+}
+
 /*
  * This is really a simplified "vm_mmap". it only handles MPX
  * bounds tables (the bounds directory is user-allocated).
@@ -51,7 +67,7 @@ static unsigned long mpx_mmap(unsigned l
 	struct vm_area_struct *vma;
 
 	/* Only bounds table can be allocated here */
-	if (len != MPX_BT_SIZE_BYTES)
+	if (len != mpx_bt_size_bytes(mm))
 		return -EINVAL;
 
 	down_write(&mm->mmap_sem);
@@ -449,13 +465,12 @@ static int mpx_cmpxchg_bd_entry(struct m
 }
 
 /*
- * With 32-bit mode, MPX_BT_SIZE_BYTES is 4MB, and the size of each
- * bounds table is 16KB. With 64-bit mode, MPX_BT_SIZE_BYTES is 2GB,
+ * With 32-bit mode, a bounds directory is 4MB, and the size of each
+ * bounds table is 16KB. With 64-bit mode, a bounds directory is 2GB,
  * and the size of each bounds table is 4MB.
  */
-static int allocate_bt(long __user *bd_entry)
+static int allocate_bt(struct mm_struct *mm, long __user *bd_entry)
 {
-	struct mm_struct *mm = current->mm;
 	unsigned long expected_old_val = 0;
 	unsigned long actual_old_val = 0;
 	unsigned long bt_addr;
@@ -466,7 +481,7 @@ static int allocate_bt(long __user *bd_e
 	 * Carve the virtual space out of userspace for the new
 	 * bounds table:
 	 */
-	bt_addr = mpx_mmap(MPX_BT_SIZE_BYTES);
+	bt_addr = mpx_mmap(mpx_bt_size_bytes(mm));
 	if (IS_ERR((void *)bt_addr))
 		return PTR_ERR((void *)bt_addr);
 	/*
@@ -517,7 +532,7 @@ static int allocate_bt(long __user *bd_e
 	trace_mpx_new_bounds_table(bt_addr);
 	return 0;
 out_unmap:
-	vm_munmap(bt_addr, MPX_BT_SIZE_BYTES);
+	vm_munmap(bt_addr, mpx_bt_size_bytes(mm));
 	return ret;
 }
 
@@ -536,6 +551,7 @@ static int do_mpx_bt_fault(void)
 {
 	unsigned long bd_entry, bd_base;
 	struct bndcsr *bndcsr;
+	struct mm_struct *mm = current->mm;
 
 	bndcsr = get_xsave_field(XSTATE_BNDCSR);
 	if (!bndcsr)
@@ -554,10 +570,10 @@ static int do_mpx_bt_fault(void)
 	 * the directory is.
 	 */
 	if ((bd_entry < bd_base) ||
-	    (bd_entry >= bd_base + MPX_BD_SIZE_BYTES))
+	    (bd_entry >= bd_base + mpx_bd_size_bytes(mm)))
 		return -EINVAL;
 
-	return allocate_bt((long __user *)bd_entry);
+	return allocate_bt(mm, (long __user *)bd_entry);
 }
 
 int mpx_handle_bd_fault(void)
@@ -789,7 +805,123 @@ static int unmap_single_bt(struct mm_str
 	 * avoid recursion, do_munmap() will check whether it comes
 	 * from one bounds table through VM_MPX flag.
 	 */
-	return do_munmap(mm, bt_addr, MPX_BT_SIZE_BYTES);
+	return do_munmap(mm, bt_addr, mpx_bt_size_bytes(mm));
+}
+
+static inline int bt_entry_size_bytes(struct mm_struct *mm)
+{
+	if (is_64bit_mm(mm))
+		return MPX_BT_ENTRY_BYTES_64;
+	else
+		return MPX_BT_ENTRY_BYTES_32;
+}
+
+/*
+ * Take a virtual address and turns it in to the offset in bytes
+ * inside of the bounds table where the bounds table entry
+ * controlling 'addr' can be found.
+ */
+static unsigned long mpx_get_bt_entry_offset_bytes(struct mm_struct *mm,
+		unsigned long addr)
+{
+	unsigned long bt_table_nr_entries;
+	unsigned long offset = addr;
+
+	if (is_64bit_mm(mm)) {
+		/* Bottom 3 bits are ignored on 64-bit */
+		offset >>= 3;
+		bt_table_nr_entries = MPX_BT_NR_ENTRIES_64;
+	} else {
+		/* Bottom 2 bits are ignored on 32-bit */
+		offset >>= 2;
+		bt_table_nr_entries = MPX_BT_NR_ENTRIES_32;
+	}
+	/*
+	 * We know the size of the table in to which we are
+	 * indexing, and we have eliminated all the low bits
+	 * which are ignored for indexing.
+	 *
+	 * Mask out all the high bits which we do not need
+	 * to index in to the table.
+	 */
+	offset &= (bt_table_nr_entries-1);
+	/*
+	 * We now have an entry offset in terms of *entries* in
+	 * the table.  We need to scale it back up to bytes.
+	 */
+	offset *= bt_entry_size_bytes(mm);
+	return offset;
+}
+
+/*
+ * Total size of the process's virtual address space
+ * Use a u64 because 4GB (for 32-bit) won't fit in a long.
+ *
+ * __VIRTUAL_MASK does not work here.  It only covers the
+ * user address space and the tables cover the *entire*
+ * virtual address space supported on the CPU.
+ */
+static inline unsigned long long mm_virt_space(struct mm_struct *mm)
+{
+	if (is_64bit_mm(mm))
+		return 1ULL << 48;
+	else
+		return 1ULL << 32;
+}
+
+/*
+ * How much virtual address space does a single bounds
+ * directory entry cover?
+ */
+static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
+{
+	if (is_64bit_mm(mm))
+		return mm_virt_space(mm) / MPX_BD_NR_ENTRIES_64;
+	else
+		return mm_virt_space(mm) / MPX_BD_NR_ENTRIES_32;
+}
+
+/*
+ * Return an offset in terms of bytes in to the bounds
+ * directory where the bounds directory entry for a given
+ * virtual address resides.
+ *
+ * This has to be in bytes because the directory entries
+ * are different sizes on 64/32 bit.
+ */
+static unsigned long mpx_get_bd_entry_offset(struct mm_struct *mm,
+		unsigned long addr)
+{
+	/*
+	 * There are several ways to derive the bd offsets.  We
+	 * use the following approach here:
+	 * 1. We know the size of the virtual address space
+	 * 2. We know the number of entries in a bounds table
+	 * 3. We know that each entry covers a fixed amount of
+	 *    virtual address space.
+	 * So, we can just divide the virtual address by the
+	 * virtual space used by one entry to determine which
+	 * entry "controls" the given virtual address.
+	 */
+	if (is_64bit_mm(mm)) {
+		int bd_entry_size = 8; /* 64-bit pointer */
+		/*
+		 * Take the 64-bit addressing hole in to account.
+		 * This is a noop on 32-bit since it has no hole.
+		 */
+		addr &= ~(mm_virt_space(mm) - 1);
+		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
+	} else {
+		int bd_entry_size = 4; /* 32-bit pointer */
+		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
+	}
+	/*
+	 * The two return calls above are exact copies.  If we
+	 * pull out a single copy and put it in here, gcc won't
+	 * realize that we're doing a power-of-2 divide and use
+	 * shifts.  It uses a real divide.  If we put them up
+	 * there, it manages to figure it out (gcc 4.8.3).
+	 */
 }
 
 /*
@@ -803,6 +935,7 @@ static int unmap_shared_bt(struct mm_str
 		unsigned long end, bool prev_shared, bool next_shared)
 {
 	unsigned long bt_addr;
+	unsigned long start_off, end_off;
 	int ret;
 
 	ret = get_bt_addr(mm, bd_entry, &bt_addr);
@@ -814,17 +947,20 @@ static int unmap_shared_bt(struct mm_str
 	if (ret)
 		return ret;
 
+	start_off = mpx_get_bt_entry_offset_bytes(mm, start);
+	end_off   = mpx_get_bt_entry_offset_bytes(mm, end);
+
 	if (prev_shared && next_shared)
 		ret = zap_bt_entries(mm, bt_addr,
-				bt_addr+MPX_GET_BT_ENTRY_OFFSET(start),
-				bt_addr+MPX_GET_BT_ENTRY_OFFSET(end));
+				bt_addr + start_off,
+				bt_addr + end_off);
 	else if (prev_shared)
 		ret = zap_bt_entries(mm, bt_addr,
-				bt_addr+MPX_GET_BT_ENTRY_OFFSET(start),
-				bt_addr+MPX_BT_SIZE_BYTES);
+				bt_addr + start_off,
+				bt_addr + mpx_bt_size_bytes(mm));
 	else if (next_shared)
 		ret = zap_bt_entries(mm, bt_addr, bt_addr,
-				bt_addr+MPX_GET_BT_ENTRY_OFFSET(end));
+				bt_addr + end_off);
 	else
 		ret = unmap_single_bt(mm, bd_entry, bt_addr);
 
@@ -845,8 +981,8 @@ static int unmap_edge_bts(struct mm_stru
 	struct vm_area_struct *prev, *next;
 	bool prev_shared = false, next_shared = false;
 
-	bde_start = mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(start);
-	bde_end = mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(end-1);
+	bde_start = mm->bd_addr + mpx_get_bd_entry_offset(mm, start);
+	bde_end   = mm->bd_addr + mpx_get_bd_entry_offset(mm, end-1);
 
 	/*
 	 * Check whether bde_start and bde_end are shared with adjacent
@@ -858,10 +994,10 @@ static int unmap_edge_bts(struct mm_stru
 	 * in to 'next'.
 	 */
 	next = find_vma_prev(mm, start, &prev);
-	if (prev && (mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(prev->vm_end-1))
+	if (prev && (mm->bd_addr + mpx_get_bd_entry_offset(mm, prev->vm_end-1))
 			== bde_start)
 		prev_shared = true;
-	if (next && (mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(next->vm_start))
+	if (next && (mm->bd_addr + mpx_get_bd_entry_offset(mm, next->vm_start))
 			== bde_end)
 		next_shared = true;
 
@@ -927,8 +1063,8 @@ static int mpx_unmap_tables(struct mm_st
 	 *   1. fully covered
 	 *   2. not at the edges of the mapping, even if full aligned
 	 */
-	bde_start = mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(start);
-	bde_end = mm->bd_addr + MPX_GET_BD_ENTRY_OFFSET(end-1);
+	bde_start = mm->bd_addr + mpx_get_bd_entry_offset(mm, start);
+	bde_end   = mm->bd_addr + mpx_get_bd_entry_offset(mm, end-1);
 	for (bd_entry = bde_start + 1; bd_entry < bde_end; bd_entry++) {
 		ret = get_bt_addr(mm, bd_entry, &bt_addr);
 		switch (ret) {
_

Re: [PATCH 16/19] x86, mpx: support 32-bit binaries on 64-bit kernel

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:

> 
> From: Dave Hansen <dave.hansen@linux.intel.com>
> 
> Changes from v20:
> 
>  * Fix macro confusion between BD and BT
>  * Add accessor for bt_entry_size_bytes()

Forgot to say this earlier. Please put the changes after the changelog
itself, i.e. after the '---'

> -#ifdef CONFIG_X86_64
> -
> -/* upper 28 bits [47:20] of the virtual address in 64-bit used to
> - * index into bounds directory (BD).
> +/*
> + * The upper 28 bits [47:20] of the virtual address in 64-bit
> + * are used to index into bounds directory (BD).
> + *
> + * The directory is 2G (2^31) in size, and with 8-byte entries
> + * it has 2^28 entries.
>   */
> -#define MPX_BD_ENTRY_OFFSET	28
> -#define MPX_BD_ENTRY_SHIFT	3
> -/* bits [19:3] of the virtual address in 64-bit used to index into
> - * bounds table (BT).
> +#define MPX_BD_SIZE_BYTES_64	(1UL<<31)
> +/* An entry is a long, so 8 bytes and a shift of 3 */

I can see the 8 bytes, but where is the shift constant?

> +#define MPX_BD_ENTRY_BYTES_64	8
> +#define MPX_BD_NR_ENTRIES_64	(MPX_BD_SIZE_BYTES_64/MPX_BD_ENTRY_BYTES_64)

> +
> +/*
> + * The 32-bit directory is 4MB (2^22) in size, and with 4-byte
> + * entries it has 2^20 entries.
>   */
> +#define MPX_BD_SIZE_BYTES_32	(1UL<<22)
> +/* An entry is a long, so 4 bytes and a shift of 2 */

Ditto.

> +#define MPX_BD_ENTRY_BYTES_32	4
> +#define MPX_BD_NR_ENTRIES_32	(MPX_BD_SIZE_BYTES_32/MPX_BD_ENTRY_BYTES_32)

Otherwise this macro zoo looks good.

> +static inline int bt_entry_size_bytes(struct mm_struct *mm)
> +{
> +	if (is_64bit_mm(mm))
> +		return MPX_BT_ENTRY_BYTES_64;
> +	else
> +		return MPX_BT_ENTRY_BYTES_32;
> +}
> +
> +/*
> + * Take a virtual address and turns it in to the offset in bytes
> + * inside of the bounds table where the bounds table entry
> + * controlling 'addr' can be found.
> + */
> +static unsigned long mpx_get_bt_entry_offset_bytes(struct mm_struct *mm,
> +		unsigned long addr)
> +{
> +	unsigned long bt_table_nr_entries;
> +	unsigned long offset = addr;
> +
> +	if (is_64bit_mm(mm)) {
> +		/* Bottom 3 bits are ignored on 64-bit */
> +		offset >>= 3;
> +		bt_table_nr_entries = MPX_BT_NR_ENTRIES_64;
> +	} else {
> +		/* Bottom 2 bits are ignored on 32-bit */
> +		offset >>= 2;
> +		bt_table_nr_entries = MPX_BT_NR_ENTRIES_32;
> +	}
> +	/*
> +	 * We know the size of the table in to which we are
> +	 * indexing, and we have eliminated all the low bits
> +	 * which are ignored for indexing.
> +	 *
> +	 * Mask out all the high bits which we do not need
> +	 * to index in to the table.
> +	 */
> +	offset &= (bt_table_nr_entries-1);

  	       ....  entries - 1); 

And you might explain why nr_entries - 1 is a proper mask,
i.e. nr_entries is always a power of 2.

> +	/*
> +	 * We now have an entry offset in terms of *entries* in
> +	 * the table.  We need to scale it back up to bytes.
> +	 */
> +	offset *= bt_entry_size_bytes(mm);

You could store the scale value out in the if () construct above, but I
guess the compiler can figure that out as well :)

> +	return offset;
> +}
> +
> +/*
> + * Total size of the process's virtual address space
> + * Use a u64 because 4GB (for 32-bit) won't fit in a long.
> + *
> + * __VIRTUAL_MASK does not work here.  It only covers the
> + * user address space and the tables cover the *entire*
> + * virtual address space supported on the CPU.
> + */
> +static inline unsigned long long mm_virt_space(struct mm_struct *mm)
> +{
> +	if (is_64bit_mm(mm))
> +		return 1ULL << 48;

cpu_info->x86_phys_bits will tell you the proper value

> +	else
> +		return 1ULL << 32;

And for a 32bit kernel 32 might be wrong because with PAE you have 36
bits.

> +/*
> + * How much virtual address space does a single bounds
> + * directory entry cover?
> + */
> +static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
> +{
> +	if (is_64bit_mm(mm))
> +		return mm_virt_space(mm) / MPX_BD_NR_ENTRIES_64;
> +	else
> +		return mm_virt_space(mm) / MPX_BD_NR_ENTRIES_32;
> +}
> +
> +/*
> + * Return an offset in terms of bytes in to the bounds
> + * directory where the bounds directory entry for a given
> + * virtual address resides.
> + *
> + * This has to be in bytes because the directory entries
> + * are different sizes on 64/32 bit.
> + */
> +static unsigned long mpx_get_bd_entry_offset(struct mm_struct *mm,
> +		unsigned long addr)
> +{
> +	/*
> +	 * There are several ways to derive the bd offsets.  We
> +	 * use the following approach here:
> +	 * 1. We know the size of the virtual address space
> +	 * 2. We know the number of entries in a bounds table
> +	 * 3. We know that each entry covers a fixed amount of
> +	 *    virtual address space.
> +	 * So, we can just divide the virtual address by the
> +	 * virtual space used by one entry to determine which
> +	 * entry "controls" the given virtual address.
> +	 */
> +	if (is_64bit_mm(mm)) {
> +		int bd_entry_size = 8; /* 64-bit pointer */
> +		/*
> +		 * Take the 64-bit addressing hole in to account.
> +		 * This is a noop on 32-bit since it has no hole.

But a 32bit kernel will not take this code path because
is_64bit_mm(mm) evaluates to false.

> +		 */
> +		addr &= ~(mm_virt_space(mm) - 1);
> +		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
> +	} else {
> +		int bd_entry_size = 4; /* 32-bit pointer */
> +		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
> +	}
> +	/*
> +	 * The two return calls above are exact copies.  If we
> +	 * pull out a single copy and put it in here, gcc won't
> +	 * realize that we're doing a power-of-2 divide and use
> +	 * shifts.  It uses a real divide.  If we put them up
> +	 * there, it manages to figure it out (gcc 4.8.3).

Can't we provide the shift values from bd_entry_virt_space() so we
don't have to worry about gcc versions being more or less clever?

Thanks,

	tglx

Re: [PATCH 16/19] x86, mpx: support 32-bit binaries on 64-bit kernel

[Dave Hansen]

On 05/18/2015 02:53 PM, Thomas Gleixner wrote:
> On Fri, 8 May 2015, Dave Hansen wrote:
> 
>>
>> From: Dave Hansen <dave.hansen@linux.intel.com>
>>
>> Changes from v20:
>>
>>  * Fix macro confusion between BD and BT
>>  * Add accessor for bt_entry_size_bytes()
> 
> Forgot to say this earlier. Please put the changes after the changelog
> itself, i.e. after the '---'
> 
>> -#ifdef CONFIG_X86_64
>> -
>> -/* upper 28 bits [47:20] of the virtual address in 64-bit used to
>> - * index into bounds directory (BD).
>> +/*
>> + * The upper 28 bits [47:20] of the virtual address in 64-bit
>> + * are used to index into bounds directory (BD).
>> + *
>> + * The directory is 2G (2^31) in size, and with 8-byte entries
>> + * it has 2^28 entries.
>>   */
>> -#define MPX_BD_ENTRY_OFFSET	28
>> -#define MPX_BD_ENTRY_SHIFT	3
>> -/* bits [19:3] of the virtual address in 64-bit used to index into
>> - * bounds table (BT).
>> +#define MPX_BD_SIZE_BYTES_64	(1UL<<31)
>> +/* An entry is a long, so 8 bytes and a shift of 3 */
> 
> I can see the 8 bytes, but where is the shift constant?

The comment is old.  I'll zap it.

>> +static inline int bt_entry_size_bytes(struct mm_struct *mm)
>> +{
>> +	if (is_64bit_mm(mm))
>> +		return MPX_BT_ENTRY_BYTES_64;
>> +	else
>> +		return MPX_BT_ENTRY_BYTES_32;
>> +}
>> +
>> +/*
>> + * Take a virtual address and turns it in to the offset in bytes
>> + * inside of the bounds table where the bounds table entry
>> + * controlling 'addr' can be found.
>> + */
>> +static unsigned long mpx_get_bt_entry_offset_bytes(struct mm_struct *mm,
>> +		unsigned long addr)
>> +{
>> +	unsigned long bt_table_nr_entries;
>> +	unsigned long offset = addr;
>> +
>> +	if (is_64bit_mm(mm)) {
>> +		/* Bottom 3 bits are ignored on 64-bit */
>> +		offset >>= 3;
>> +		bt_table_nr_entries = MPX_BT_NR_ENTRIES_64;
>> +	} else {
>> +		/* Bottom 2 bits are ignored on 32-bit */
>> +		offset >>= 2;
>> +		bt_table_nr_entries = MPX_BT_NR_ENTRIES_32;
>> +	}
>> +	/*
>> +	 * We know the size of the table in to which we are
>> +	 * indexing, and we have eliminated all the low bits
>> +	 * which are ignored for indexing.
>> +	 *
>> +	 * Mask out all the high bits which we do not need
>> +	 * to index in to the table.
>> +	 */
>> +	offset &= (bt_table_nr_entries-1);
> 
>   	       ....  entries - 1); 
> 
> And you might explain why nr_entries - 1 is a proper mask,
> i.e. nr_entries is always a power of 2.
> 
>> +	/*
>> +	 * We now have an entry offset in terms of *entries* in
>> +	 * the table.  We need to scale it back up to bytes.
>> +	 */
>> +	offset *= bt_entry_size_bytes(mm);
> 
> You could store the scale value out in the if () construct above, but I
> guess the compiler can figure that out as well :)
> 
>> +	return offset;
>> +}
>> +
>> +/*
>> + * Total size of the process's virtual address space
>> + * Use a u64 because 4GB (for 32-bit) won't fit in a long.
>> + *
>> + * __VIRTUAL_MASK does not work here.  It only covers the
>> + * user address space and the tables cover the *entire*
>> + * virtual address space supported on the CPU.
>> + */
>> +static inline unsigned long long mm_virt_space(struct mm_struct *mm)
>> +{
>> +	if (is_64bit_mm(mm))
>> +		return 1ULL << 48;
> 
> cpu_info->x86_phys_bits will tell you the proper value
> 
>> +	else
>> +		return 1ULL << 32;
> 
> And for a 32bit kernel 32 might be wrong because with PAE you have 36
> bits.

That's physical space.  I really do need virtual space here.

But your comments stand for ->x86_virt_bits.  I'll fix.

>> +static unsigned long mpx_get_bd_entry_offset(struct mm_struct *mm,
>> +		unsigned long addr)
>> +{
>> +	/*
>> +	 * There are several ways to derive the bd offsets.  We
>> +	 * use the following approach here:
>> +	 * 1. We know the size of the virtual address space
>> +	 * 2. We know the number of entries in a bounds table
>> +	 * 3. We know that each entry covers a fixed amount of
>> +	 *    virtual address space.
>> +	 * So, we can just divide the virtual address by the
>> +	 * virtual space used by one entry to determine which
>> +	 * entry "controls" the given virtual address.
>> +	 */
>> +	if (is_64bit_mm(mm)) {
>> +		int bd_entry_size = 8; /* 64-bit pointer */
>> +		/*
>> +		 * Take the 64-bit addressing hole in to account.
>> +		 * This is a noop on 32-bit since it has no hole.
> 
> But a 32bit kernel will not take this code path because
> is_64bit_mm(mm) evaluates to false.

I meant that in case someone wondered why I didn't have that code in the
32-bit version.  I'll move the comment.

>> +		 */
>> +		addr &= ~(mm_virt_space(mm) - 1);
>> +		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
>> +	} else {
>> +		int bd_entry_size = 4; /* 32-bit pointer */
>> +		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
>> +	}
>> +	/*
>> +	 * The two return calls above are exact copies.  If we
>> +	 * pull out a single copy and put it in here, gcc won't
>> +	 * realize that we're doing a power-of-2 divide and use
>> +	 * shifts.  It uses a real divide.  If we put them up
>> +	 * there, it manages to figure it out (gcc 4.8.3).
> 
> Can't we provide the shift values from bd_entry_virt_space() so we
> don't have to worry about gcc versions being more or less clever?

Yes, I could go back and rework all the math to be done with shifts
instead of power-of-2 divides (which is what was done before).  But,
it's very clear the way that it stands, minus this wart.  The code look
a *lot* better this way.

This isn't super performance-sensitive code.  It's basically in the
munmap() path.  I just really didn't like the idea of an actual integer
divide in there.

So, if GCC breaks this, so be it.  I don't think we'll ever notice.  The
optimization was just too obvious to completely ignore.

Re: [PATCH 16/19] x86, mpx: support 32-bit binaries on 64-bit kernel

[Thomas Gleixner]

On Mon, 18 May 2015, Dave Hansen wrote:
> On 05/18/2015 02:53 PM, Thomas Gleixner wrote:
> >> +/*
> >> + * Total size of the process's virtual address space
> >> + * Use a u64 because 4GB (for 32-bit) won't fit in a long.
> >> + *
> >> + * __VIRTUAL_MASK does not work here.  It only covers the
> >> + * user address space and the tables cover the *entire*
> >> + * virtual address space supported on the CPU.
> >> + */
> >> +static inline unsigned long long mm_virt_space(struct mm_struct *mm)
> >> +{
> >> +	if (is_64bit_mm(mm))
> >> +		return 1ULL << 48;
> > 
> > cpu_info->x86_phys_bits will tell you the proper value
> > 
> >> +	else
> >> +		return 1ULL << 32;
> > 
> > And for a 32bit kernel 32 might be wrong because with PAE you have 36
> > bits.
> 
> That's physical space.  I really do need virtual space here.

Stupid me

> >> +	/*
> >> +	 * The two return calls above are exact copies.  If we
> >> +	 * pull out a single copy and put it in here, gcc won't
> >> +	 * realize that we're doing a power-of-2 divide and use
> >> +	 * shifts.  It uses a real divide.  If we put them up
> >> +	 * there, it manages to figure it out (gcc 4.8.3).
> > 
> > Can't we provide the shift values from bd_entry_virt_space() so we
> > don't have to worry about gcc versions being more or less clever?
> 
> Yes, I could go back and rework all the math to be done with shifts
> instead of power-of-2 divides (which is what was done before).  But,
> it's very clear the way that it stands, minus this wart.  The code look
> a *lot* better this way.
> 
> This isn't super performance-sensitive code.  It's basically in the
> munmap() path.  I just really didn't like the idea of an actual integer
> divide in there.
> 
> So, if GCC breaks this, so be it.  I don't think we'll ever notice.  The
> optimization was just too obvious to completely ignore.

Fair enough.

Thanks,

	tglx
 

[PATCH 17/19] x86, mpx: rewrite unmap code

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The MPX code needs to clear out bounds tables for memory which
is no longer in use.  We do this when a userspace mapping is
torn down (unmapped).

There are two modes:
1. An entire bounds table becomes unused, and can be freed
   and its pointer removed from the bounds directory.  This
   happens either when a large mapping is torn down, or when
   a small mapping is torn down and it is the last mapping
   "covered" by a bounds table.
2. Only part of a bounds table becomes unused, in which case
   we free the backing memory as if MADV_DONTNEED was called.

The old code was a spaghetti mess of "edge" bounds tables
where the edges were handled specially, even if we were
unmapping an entire one.  Non-edge bounds tables are always
fully unmapped, but share a different code path from the edge
ones.  The old code had a bug where it was unmapping too much
memory.  I worked on fixing it for two days and gave up.

I didn't write the original code.  I didn't particularly like
it, but it worked, so I left it.  After my debug session, I
realized it was undebuggagle *and* buggy, so out it went.

I also wrote a new unmapping test program which uncovers bugs
pretty nicely.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |  413 +++++++++++++++++++++-------------------------------
 1 file changed, 169 insertions(+), 244 deletions(-)

diff -puN arch/x86/mm/mpx.c~rewrite-unmap-code arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~rewrite-unmap-code	2015-05-08 11:46:17.808889149 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:17.810889239 -0700
@@ -704,110 +704,6 @@ static int get_bt_addr(struct mm_struct
 	return 0;
 }
 
-/*
- * Free the backing physical pages of bounds table 'bt_addr'.
- * Assume start...end is within that bounds table.
- */
-static int zap_bt_entries(struct mm_struct *mm,
-		unsigned long bt_addr,
-		unsigned long start, unsigned long end)
-{
-	struct vm_area_struct *vma;
-	unsigned long addr, len;
-
-	/*
-	 * Find the first overlapping vma. If vma->vm_start > start, there
-	 * will be a hole in the bounds table. This -EINVAL return will
-	 * cause a SIGSEGV.
-	 */
-	vma = find_vma(mm, start);
-	if (!vma || vma->vm_start > start)
-		return -EINVAL;
-
-	/*
-	 * A NUMA policy on a VM_MPX VMA could cause this bouds table to
-	 * be split. So we need to look across the entire 'start -> end'
-	 * range of this bounds table, find all of the VM_MPX VMAs, and
-	 * zap only those.
-	 */
-	addr = start;
-	while (vma && vma->vm_start < end) {
-		/*
-		 * We followed a bounds directory entry down
-		 * here.  If we find a non-MPX VMA, that's bad,
-		 * so stop immediately and return an error.  This
-		 * probably results in a SIGSEGV.
-		 */
-		if (!is_mpx_vma(vma))
-			return -EINVAL;
-
-		len = min(vma->vm_end, end) - addr;
-		zap_page_range(vma, addr, len, NULL);
-		trace_mpx_unmap_zap(addr, addr+len);
-
-		vma = vma->vm_next;
-		addr = vma->vm_start;
-	}
-
-	return 0;
-}
-
-static int unmap_single_bt(struct mm_struct *mm,
-		long __user *bd_entry, unsigned long bt_addr)
-{
-	unsigned long expected_old_val = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
-	unsigned long uninitialized_var(actual_old_val);
-	int ret;
-
-	while (1) {
-		int need_write = 1;
-		unsigned long cleared_bd_entry = 0;
-
-		pagefault_disable();
-		ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,
-				bd_entry, expected_old_val, cleared_bd_entry);
-		pagefault_enable();
-		if (!ret)
-			break;
-		if (ret == -EFAULT)
-			ret = mpx_resolve_fault(bd_entry, need_write);
-		/*
-		 * If we could not resolve the fault, consider it
-		 * userspace's fault and error out.
-		 */
-		if (ret)
-			return ret;
-	}
-	/*
-	 * The cmpxchg was performed, check the results.
-	 */
-	if (actual_old_val != expected_old_val) {
-		/*
-		 * Someone else raced with us to unmap the table.
-		 * There was no bounds table pointed to by the
-		 * directory, so declare success.  Somebody freed
-		 * it.
-		 */
-		if (!actual_old_val)
-			return 0;
-		/*
-		 * Something messed with the bounds directory
-		 * entry.  We hold mmap_sem for read or write
-		 * here, so it could not be a _new_ bounds table
-		 * that someone just allocated.  Something is
-		 * wrong, so pass up the error and SIGSEGV.
-		 */
-		return -EINVAL;
-	}
-
-	/*
-	 * Note, we are likely being called under do_munmap() already. To
-	 * avoid recursion, do_munmap() will check whether it comes
-	 * from one bounds table through VM_MPX flag.
-	 */
-	return do_munmap(mm, bt_addr, mpx_bt_size_bytes(mm));
-}
-
 static inline int bt_entry_size_bytes(struct mm_struct *mm)
 {
 	if (is_64bit_mm(mm))
@@ -882,13 +778,69 @@ static inline unsigned long bd_entry_vir
 }
 
 /*
- * Return an offset in terms of bytes in to the bounds
- * directory where the bounds directory entry for a given
- * virtual address resides.
- *
- * This has to be in bytes because the directory entries
- * are different sizes on 64/32 bit.
+ * Free the backing physical pages of bounds table 'bt_addr'.
+ * Assume start...end is within that bounds table.
  */
+static noinline int zap_bt_entries_mapping(struct mm_struct *mm,
+		unsigned long bt_addr,
+		unsigned long start_mapping, unsigned long end_mapping)
+{
+	struct vm_area_struct *vma;
+	unsigned long addr, len;
+	unsigned long start;
+	unsigned long end;
+
+	/*
+	 * if we 'end' on a boundary, the offset will be 0 which
+	 * is not what we want.  Back it up a byte to get the
+	 * last bt entry.  Then once we have the entry itself,
+	 * move 'end' back up by the table entry size.
+	 */
+	start = bt_addr + mpx_get_bt_entry_offset_bytes(mm, start_mapping);
+	end   = bt_addr + mpx_get_bt_entry_offset_bytes(mm, end_mapping - 1);
+	/*
+	 * Move end back up by one entry.  Among other things
+	 * this ensures that it remains page-aligned and does
+	 * not screw up zap_page_range()
+	 */
+	end += bt_entry_size_bytes(mm);
+
+	/*
+	 * Find the first overlapping vma. If vma->vm_start > start, there
+	 * will be a hole in the bounds table. This -EINVAL return will
+	 * cause a SIGSEGV.
+	 */
+	vma = find_vma(mm, start);
+	if (!vma || vma->vm_start > start)
+		return -EINVAL;
+
+	/*
+	 * A NUMA policy on a VM_MPX VMA could cause this bounds table to
+	 * be split. So we need to look across the entire 'start -> end'
+	 * range of this bounds table, find all of the VM_MPX VMAs, and
+	 * zap only those.
+	 */
+	addr = start;
+	while (vma && vma->vm_start < end) {
+		/*
+		 * We followed a bounds directory entry down
+		 * here.  If we find a non-MPX VMA, that's bad,
+		 * so stop immediately and return an error.  This
+		 * probably results in a SIGSEGV.
+		 */
+		if (!is_mpx_vma(vma))
+			return -EINVAL;
+
+		len = min(vma->vm_end, end) - addr;
+		zap_page_range(vma, addr, len, NULL);
+		trace_mpx_unmap_zap(addr, addr+len);
+
+		vma = vma->vm_next;
+		addr = vma->vm_start;
+	}
+	return 0;
+}
+
 static unsigned long mpx_get_bd_entry_offset(struct mm_struct *mm,
 		unsigned long addr)
 {
@@ -909,7 +861,7 @@ static unsigned long mpx_get_bd_entry_of
 		 * Take the 64-bit addressing hole in to account.
 		 * This is a noop on 32-bit since it has no hole.
 		 */
-		addr &= ~(mm_virt_space(mm) - 1);
+		addr &= (mm_virt_space(mm) - 1);
 		return (addr / bd_entry_virt_space(mm)) * bd_entry_size;
 	} else {
 		int bd_entry_size = 4; /* 32-bit pointer */
@@ -924,69 +876,80 @@ static unsigned long mpx_get_bd_entry_of
 	 */
 }
 
-/*
- * If the bounds table pointed by bounds directory 'bd_entry' is
- * not shared, unmap this whole bounds table. Otherwise, only free
- * those backing physical pages of bounds table entries covered
- * in this virtual address region start...end.
- */
-static int unmap_shared_bt(struct mm_struct *mm,
-		long __user *bd_entry, unsigned long start,
-		unsigned long end, bool prev_shared, bool next_shared)
+static int unmap_entire_bt(struct mm_struct *mm,
+		long __user *bd_entry, unsigned long bt_addr)
 {
-	unsigned long bt_addr;
-	unsigned long start_off, end_off;
+	unsigned long expected_old_val = bt_addr | MPX_BD_ENTRY_VALID_FLAG;
+	unsigned long uninitialized_var(actual_old_val);
 	int ret;
 
-	ret = get_bt_addr(mm, bd_entry, &bt_addr);
+	while (1) {
+		int need_write = 1;
+		unsigned long cleared_bd_entry = 0;
+
+		pagefault_disable();
+		ret = mpx_cmpxchg_bd_entry(mm, &actual_old_val,
+				bd_entry, expected_old_val, cleared_bd_entry);
+		pagefault_enable();
+		if (!ret)
+			break;
+		if (ret == -EFAULT)
+			ret = mpx_resolve_fault(bd_entry, need_write);
+		/*
+		 * If we could not resolve the fault, consider it
+		 * userspace's fault and error out.
+		 */
+		if (ret)
+			return ret;
+	}
+	/*
+	 * The cmpxchg was performed, check the results.
+	 */
+	if (actual_old_val != expected_old_val) {
+		/*
+		 * Someone else raced with us to unmap the table.
+		 * That is OK, since we were both trying to do
+		 * the same thing.  Declare success.
+		 */
+		if (!actual_old_val)
+			return 0;
+		/*
+		 * Something messed with the bounds directory
+		 * entry.  We hold mmap_sem for read or write
+		 * here, so it could not be a _new_ bounds table
+		 * that someone just allocated.  Something is
+		 * wrong, so pass up the error and SIGSEGV.
+		 */
+		return -EINVAL;
+	}
 	/*
-	 * We could see an "error" ret for not-present bounds
-	 * tables (not really an error), or actual errors, but
-	 * stop unmapping either way.
+	 * Note, we are likely being called under do_munmap() already. To
+	 * avoid recursion, do_munmap() will check whether it comes
+	 * from one bounds table through VM_MPX flag.
 	 */
-	if (ret)
-		return ret;
-
-	start_off = mpx_get_bt_entry_offset_bytes(mm, start);
-	end_off   = mpx_get_bt_entry_offset_bytes(mm, end);
-
-	if (prev_shared && next_shared)
-		ret = zap_bt_entries(mm, bt_addr,
-				bt_addr + start_off,
-				bt_addr + end_off);
-	else if (prev_shared)
-		ret = zap_bt_entries(mm, bt_addr,
-				bt_addr + start_off,
-				bt_addr + mpx_bt_size_bytes(mm));
-	else if (next_shared)
-		ret = zap_bt_entries(mm, bt_addr, bt_addr,
-				bt_addr + end_off);
-	else
-		ret = unmap_single_bt(mm, bd_entry, bt_addr);
-
-	return ret;
+	return do_munmap(mm, bt_addr, mpx_bt_size_bytes(mm));
 }
 
-/*
- * A virtual address region being munmap()ed might share bounds table
- * with adjacent VMAs. We only need to free the backing physical
- * memory of these shared bounds tables entries covered in this virtual
- * address region.
- */
-static int unmap_edge_bts(struct mm_struct *mm,
-		unsigned long start, unsigned long end)
+static int try_unmap_single_bt(struct mm_struct *mm,
+	       unsigned long start, unsigned long end)
 {
+	struct vm_area_struct *next;
+	struct vm_area_struct *prev;
+	/*
+	 * "bta" == Bounds Table Area: the area controlled by the
+	 * bounds table that we are unmapping.
+	 */
+	unsigned long bta_start_vaddr = start & ~(bd_entry_virt_space(mm)-1);
+	unsigned long bta_end_vaddr = bta_start_vaddr + bd_entry_virt_space(mm);
+	unsigned long uninitialized_var(bt_addr);
+	void __user *bde_vaddr;
 	int ret;
-	long __user *bde_start, *bde_end;
-	struct vm_area_struct *prev, *next;
-	bool prev_shared = false, next_shared = false;
-
-	bde_start = mm->bd_addr + mpx_get_bd_entry_offset(mm, start);
-	bde_end   = mm->bd_addr + mpx_get_bd_entry_offset(mm, end-1);
-
 	/*
-	 * Check whether bde_start and bde_end are shared with adjacent
-	 * VMAs.
+	 * We know 'start' and 'end' lie within an area controlled
+	 * by a single bounds table.  See if there are any other
+	 * VMAs controlled by that bounds table.  If there are not
+	 * then we can "expand" the are we are unmapping to possibly
+	 * cover the entire table.
 	 *
 	 * We already unliked the VMAs from the mm's rbtree so 'start'
 	 * is guaranteed to be in a hole. This gets us the first VMA
@@ -994,102 +957,64 @@ static int unmap_edge_bts(struct mm_stru
 	 * in to 'next'.
 	 */
 	next = find_vma_prev(mm, start, &prev);
-	if (prev && (mm->bd_addr + mpx_get_bd_entry_offset(mm, prev->vm_end-1))
-			== bde_start)
-		prev_shared = true;
-	if (next && (mm->bd_addr + mpx_get_bd_entry_offset(mm, next->vm_start))
-			== bde_end)
-		next_shared = true;
-
-	/*
-	 * This virtual address region being munmap()ed is only
-	 * covered by one bounds table.
-	 *
-	 * In this case, if this table is also shared with adjacent
-	 * VMAs, only part of the backing physical memory of the bounds
-	 * table need be freeed. Otherwise the whole bounds table need
-	 * be unmapped.
-	 */
-	if (bde_start == bde_end) {
-		return unmap_shared_bt(mm, bde_start, start, end,
-				prev_shared, next_shared);
+	if ((!prev || prev->vm_end <= bta_start_vaddr) &&
+	    (!next || next->vm_start >= bta_end_vaddr)) {
+		/*
+		 * No neighbor VMAs controlled by same bounds
+		 * table.  Try to unmap the whole thing
+		 */
+		start = bta_start_vaddr;
+		end = bta_end_vaddr;
 	}
 
+	bde_vaddr = mm->bd_addr + mpx_get_bd_entry_offset(mm, start);
+	ret = get_bt_addr(mm, bde_vaddr, &bt_addr);
 	/*
-	 * If more than one bounds tables are covered in this virtual
-	 * address region being munmap()ed, we need to separately check
-	 * whether bde_start and bde_end are shared with adjacent VMAs.
+	 * No bounds table there, so nothing to unmap.
 	 */
-	ret = unmap_shared_bt(mm, bde_start, start, end, prev_shared, false);
-	if (ret)
-		return ret;
-	ret = unmap_shared_bt(mm, bde_end, start, end, false, next_shared);
+	if (ret == -ENOENT) {
+		ret = 0;
+		return 0;
+	}
 	if (ret)
 		return ret;
-
-	return 0;
+	/*
+	 * We are unmapping an entire table.  Either because the
+	 * unmap that started this whole process was large enough
+	 * to cover an entire table, or that the unmap was small
+	 * but was the area covered by a bounds table.
+	 */
+	if ((start == bta_start_vaddr) &&
+	    (end == bta_end_vaddr))
+		return unmap_entire_bt(mm, bde_vaddr, bt_addr);
+	return zap_bt_entries_mapping(mm, bt_addr, start, end);
 }
 
 static int mpx_unmap_tables(struct mm_struct *mm,
 		unsigned long start, unsigned long end)
 {
-	int ret;
-	long __user *bd_entry, *bde_start, *bde_end;
-	unsigned long bt_addr;
-
+	unsigned long one_unmap_start;
 	trace_mpx_unmap_search(start, end);
-	/*
-	 * "Edge" bounds tables are those which are being used by the region
-	 * (start -> end), but that may be shared with adjacent areas.  If they
-	 * turn out to be completely unshared, they will be freed.  If they are
-	 * shared, we will free the backing store (like an MADV_DONTNEED) for
-	 * areas used by this region.
-	 */
-	ret = unmap_edge_bts(mm, start, end);
-	switch (ret) {
-		/* non-present tables are OK */
-		case 0:
-		case -ENOENT:
-			/* Success, or no tables to unmap */
-			break;
-		case -EINVAL:
-		case -EFAULT:
-		default:
-			return ret;
-	}
-
-	/*
-	 * Only unmap the bounds table that are
-	 *   1. fully covered
-	 *   2. not at the edges of the mapping, even if full aligned
-	 */
-	bde_start = mm->bd_addr + mpx_get_bd_entry_offset(mm, start);
-	bde_end   = mm->bd_addr + mpx_get_bd_entry_offset(mm, end-1);
-	for (bd_entry = bde_start + 1; bd_entry < bde_end; bd_entry++) {
-		ret = get_bt_addr(mm, bd_entry, &bt_addr);
-		switch (ret) {
-			case 0:
-				break;
-			case -ENOENT:
-				/* No table here, try the next one */
-				continue;
-			case -EINVAL:
-			case -EFAULT:
-			default:
-				/*
-				 * Note: we are being strict here.
-				 * Any time we run in to an issue
-				 * unmapping tables, we stop and
-				 * SIGSEGV.
-				 */
-				return ret;
-		}
 
-		ret = unmap_single_bt(mm, bd_entry, bt_addr);
+	one_unmap_start = start;
+	while (one_unmap_start < end) {
+		int ret;
+		unsigned long next_unmap_start = ALIGN(one_unmap_start+1,
+						       bd_entry_virt_space(mm));
+		unsigned long one_unmap_end = end;
+		/*
+		 * if the end is beyond the current bounds table,
+		 * move it back so we only deal with a single one
+		 * at a time
+		 */
+		if (one_unmap_end > next_unmap_start)
+			one_unmap_end = next_unmap_start;
+		ret = try_unmap_single_bt(mm, one_unmap_start, one_unmap_end);
 		if (ret)
 			return ret;
-	}
 
+		one_unmap_start = next_unmap_start;
+	}
 	return 0;
 }
 
_

Re: [PATCH 17/19] x86, mpx: rewrite unmap code

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> The MPX code needs to clear out bounds tables for memory which
> is no longer in use.  We do this when a userspace mapping is
> torn down (unmapped).
> 
> There are two modes:
> 1. An entire bounds table becomes unused, and can be freed
>    and its pointer removed from the bounds directory.  This
>    happens either when a large mapping is torn down, or when
>    a small mapping is torn down and it is the last mapping
>    "covered" by a bounds table.
> 2. Only part of a bounds table becomes unused, in which case
>    we free the backing memory as if MADV_DONTNEED was called.
> 
> The old code was a spaghetti mess of "edge" bounds tables
> where the edges were handled specially, even if we were
> unmapping an entire one.  Non-edge bounds tables are always
> fully unmapped, but share a different code path from the edge
> ones.  The old code had a bug where it was unmapping too much
> memory.  I worked on fixing it for two days and gave up.
> 
> I didn't write the original code.  I didn't particularly like
> it, but it worked, so I left it.  After my debug session, I
> realized it was undebuggagle *and* buggy, so out it went.
> 
> I also wrote a new unmapping test program which uncovers bugs
> pretty nicely.

Very appreciated. This is really readable now.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 18/19] x86, mpx: do not count MPX VMAs as neighbors when unmapping

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

The comment pretty much says it all.

I wrote a test program that does lots of random allocations
and forces bounds tables to be created.  It came up with a
layout like this:

  ....   | BOUNDS DIRECTORY ENTRY COVERS |  ....
         |    BOUNDS TABLE COVERS        |
|  BOUNDS TABLE |  REAL ALLOC | BOUNDS TABLE |

Unmapping "REAL ALLOC" should have been able to free the
bounds table "covering" the "REAL ALLOC" because it was the
last real user.  But, the neighboring VMA bounds tables were
found, considered as real neighbors, and we declined to free
the bounds table covering the area.

Doing this over and over left a small but significant number
of these orphans.  Handling them is fairly straighforward.
All we have to do is walk the VMAs and skip all of the MPX
ones when looking for neighbors.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |   24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff -puN arch/x86/mm/mpx.c~mpx-dont-count-mpx-vmas-as-neighbors arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~mpx-dont-count-mpx-vmas-as-neighbors	2015-05-08 11:46:18.055900289 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:18.057900380 -0700
@@ -945,16 +945,30 @@ static int try_unmap_single_bt(struct mm
 	void __user *bde_vaddr;
 	int ret;
 	/*
+	 * We already unliked the VMAs from the mm's rbtree so 'start'
+	 * is guaranteed to be in a hole. This gets us the first VMA
+	 * before the hole in to 'prev' and the next VMA after the hole
+	 * in to 'next'.
+	 */
+	next = find_vma_prev(mm, start, &prev);
+	/*
+	 * Do not count other MPX bounds table VMAs as neighbors.
+	 * Although theoretically possible, we do not allow bounds
+	 * tables for bounds tables so our heads do not explode.
+	 * If we count them as neighbors here, we may end up with
+	 * lots of tables even though we have no actual table
+	 * entries in use.
+	 */
+	while (next && is_mpx_vma(next))
+		next = next->vm_next;
+	while (prev && is_mpx_vma(prev))
+		prev = prev->vm_prev;
+	/*
 	 * We know 'start' and 'end' lie within an area controlled
 	 * by a single bounds table.  See if there are any other
 	 * VMAs controlled by that bounds table.  If there are not
 	 * then we can "expand" the are we are unmapping to possibly
 	 * cover the entire table.
-	 *
-	 * We already unliked the VMAs from the mm's rbtree so 'start'
-	 * is guaranteed to be in a hole. This gets us the first VMA
-	 * before the hole in to 'prev' and the next VMA after the hole
-	 * in to 'next'.
 	 */
 	next = find_vma_prev(mm, start, &prev);
 	if ((!prev || prev->vm_end <= bta_start_vaddr) &&
_

Re: [PATCH 18/19] x86, mpx: do not count MPX VMAs as neighbors when unmapping

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> The comment pretty much says it all.
> 
> I wrote a test program that does lots of random allocations
> and forces bounds tables to be created.  It came up with a
> layout like this:
> 
>   ....   | BOUNDS DIRECTORY ENTRY COVERS |  ....
>          |    BOUNDS TABLE COVERS        |
> |  BOUNDS TABLE |  REAL ALLOC | BOUNDS TABLE |
> 
> Unmapping "REAL ALLOC" should have been able to free the
> bounds table "covering" the "REAL ALLOC" because it was the
> last real user.  But, the neighboring VMA bounds tables were
> found, considered as real neighbors, and we declined to free
> the bounds table covering the area.
> 
> Doing this over and over left a small but significant number
> of these orphans.  Handling them is fairly straighforward.
> All we have to do is walk the VMAs and skip all of the MPX
> ones when looking for neighbors.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 19/19] x86, mpx: allow mixed binaries again

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

We explicitly disable allowing 32-bit binaries to enable
MPX on 64-bit kernels.  Re-allow that.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/mm/mpx.c |    6 ------
 1 file changed, 6 deletions(-)

diff -puN arch/x86/mm/mpx.c~x86-mpx-allow-mixed-binaries-again arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-allow-mixed-binaries-again	2015-05-08 11:46:23.253134695 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:23.256134830 -0700
@@ -368,12 +368,6 @@ static __user void *mpx_get_bounds_dir(v
 		return MPX_INVALID_BOUNDS_DIR;
 
 	/*
-	 * 32-bit binaries on 64-bit kernels are currently
-	 * unsupported.
-	 */
-	if (IS_ENABLED(CONFIG_X86_64) && test_thread_flag(TIF_IA32))
-		return MPX_INVALID_BOUNDS_DIR;
-	/*
 	 * The bounds directory pointer is stored in a register
 	 * only accessible if we first do an xsave.
 	 */
_

Re: [PATCH 19/19] x86, mpx: allow mixed binaries again

[Thomas Gleixner]

On Fri, 8 May 2015, Dave Hansen wrote:
> We explicitly disable allowing 32-bit binaries to enable
> MPX on 64-bit kernels.  Re-allow that.
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

> ---
> 
>  b/arch/x86/mm/mpx.c |    6 ------
>  1 file changed, 6 deletions(-)
> 
> diff -puN arch/x86/mm/mpx.c~x86-mpx-allow-mixed-binaries-again arch/x86/mm/mpx.c
> --- a/arch/x86/mm/mpx.c~x86-mpx-allow-mixed-binaries-again	2015-05-08 11:46:23.253134695 -0700
> +++ b/arch/x86/mm/mpx.c	2015-05-08 11:46:23.256134830 -0700
> @@ -368,12 +368,6 @@ static __user void *mpx_get_bounds_dir(v
>  		return MPX_INVALID_BOUNDS_DIR;
>  
>  	/*
> -	 * 32-bit binaries on 64-bit kernels are currently
> -	 * unsupported.
> -	 */
> -	if (IS_ENABLED(CONFIG_X86_64) && test_thread_flag(TIF_IA32))
> -		return MPX_INVALID_BOUNDS_DIR;
> -	/*
>  	 * The bounds directory pointer is stored in a register
>  	 * only accessible if we first do an xsave.
>  	 */
> _
> 

[PATCH 00/19] x86, mpx updates for 4.2 (take 7)

[Dave Hansen]

Note: this has been lightly tested.  There were no major changes
since the last version, and I ran my normal compile tests, but
this was a bit hurried because I'm about to get on a plane and
will not be reading email for the next week.

Changes from take 7 / v21:
 * Address a bunch of Thomas's review comments.

Changes from take 5 / v20:

 * Fix get_xsave_addr() to consult xstate_bv in anticipation
   of fixes to xsave code.
 * Bug fix for when an VMA being unmapped has neighbors which
   are bounds tables.
 * Rewrite unmapping code.  I didn't do this lightly. It was
   not originally my own code, and I resisted changing it
   because it worked.  But, I started bug chasing and decided
   it was unmaintainable.  The rewrite ended up removing
   about 20% of the unmapping code and made it much simpler.

Changes from take 4 / v19:

 * Do not pass a task_struct around when we are
   really just going to operate on current

Changes from take 3 / v18 (all minor):

 * use DECLARE_EVENT_CLASS()/DEFINE_EVENT() for
   the ranged tracepoints to save 10 lines of code.

Changes from take 2 / v17 (all minor):

 * fix a couple of whitespace borkages caught by checkpatch,
   and a spelling error or two.
 * replace printk with pr_info() for boot disable
 * change trace print format for address intervals
 * fix up variable name in tsk_get_xsave_addr() comment
 * remove tsk_get_xsave_field() GPL export
 * fix up Qiaowei's From:

--

Hi x86 maintainers,

There are a few basic things going on here:
1. Make FPU/xsave code preempt safe and work properly
2. Add trace points to make kernel and app debugging easier
3. Add a boot-time disable for mpx
4. Rewrite the unmapping code.
5. Support 32-bit binaries to run on 64-bit kernels

This sees breakage unless either booted with 'noxsaves'
or if it has Fenghua's set from here applied:

	http://lkml.kernel.org/r/1429678319-61356-1-git-send-email-fenghua.yu@intel.com

This set is also available against 4.1-rc3 in git:

  git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx.git mpx-v22

 Documentation/kernel-parameters.txt |    4 
 arch/x86/include/asm/mmu_context.h  |   13 
 arch/x86/include/asm/mpx.h          |   74 ++---
 arch/x86/include/asm/processor.h    |   12 
 arch/x86/include/asm/trace/mpx.h    |  122 ++++++++
 arch/x86/include/asm/xsave.h        |    1 
 arch/x86/kernel/cpu/common.c        |   16 +
 arch/x86/kernel/traps.c             |   18 -
 arch/x86/kernel/uprobes.c           |   10 
 arch/x86/kernel/xsave.c             |   77 ++++-
 arch/x86/mm/mpx.c                   |  507 ++++++++++++++++++++++--------------
 kernel/sys.c                        |    8 
 12 files changed, 595 insertions(+), 267 deletions(-)

[PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

There are two basic things that can happen as the result of
a bounds exception (#BR):

	1. We allocate a new bounds table
	2. We pass up a bounds exception to userspace.

This patch adds a trace point for the case where we are
passing the exception up to userspace with a signal.

We are also explicit that we're printing out the inverse of
the 'upper' that we encounter.  If you want to filter, for
instance, you need to ~ the value first.  The reason we do
this is because of how 'upper' is stored in the bounds table.
If a pointer's range is:

	0x1000 -> 0x2000

it is stored in the bounds table as (32-bits here for brevity):

	lower: 0x00001000
	upper: 0xffffdfff

That is so that an all 0's entry:

	lower: 0x00000000
	upper: 0x00000000

corresponds to the "init" bounds which store a *range* of:

	0x00000000 -> 0xffffffff

That is, by far, the common case, and that lets us use the
zero page, or deduplicate the memory, etc... The 'upper'
stored in the table is gibberish to print by itself, so we
print ~upper to get the *actual*, logical, human-readable
value printed out.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/trace/mpx.h |   34 ++++++++++++++++++++++++++++++++++
 b/arch/x86/mm/mpx.c                |    1 +
 2 files changed, 35 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1 arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1	2015-05-18 17:49:01.180524056 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-18 17:49:01.185524282 -0700
@@ -8,6 +8,40 @@
 
 #ifdef CONFIG_X86_INTEL_MPX
 
+TRACE_EVENT(mpx_bounds_register_exception,
+
+	TP_PROTO(void *addr_referenced,
+		 struct bndreg *bndreg),
+	TP_ARGS(addr_referenced, bndreg),
+
+	TP_STRUCT__entry(
+		__field(void *, addr_referenced)
+		__field(u64, lower_bound)
+		__field(u64, upper_bound)
+	),
+
+	TP_fast_assign(
+		__entry->addr_referenced = addr_referenced;
+		__entry->lower_bound = bndreg->lower_bound;
+		__entry->upper_bound = bndreg->upper_bound;
+	),
+	/*
+	 * Note that we are printing out the '~' of the upper
+	 * bounds register here.  It is actually stored in its
+	 * one's complement form so that its 'init' state
+	 * corresponds to all 0's.  But, that looks like
+	 * gibberish when printed out, so print out the 1's
+	 * complement instead of the actual value here.  Note
+	 * though that you still need to specify filters for the
+	 * actual value, not the displayed one.
+	 */
+	TP_printk("address referenced: 0x%p bounds: lower: 0x%llx ~upper: 0x%llx",
+		__entry->addr_referenced,
+		__entry->lower_bound,
+		~__entry->upper_bound
+	)
+);
+
 TRACE_EVENT(bounds_exception_mpx,
 
 	TP_PROTO(struct bndcsr *bndcsr),
diff -puN arch/x86/mm/mpx.c~x86-mpx-trace-1 arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-trace-1	2015-05-18 17:49:01.181524101 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-18 17:49:01.185524282 -0700
@@ -336,6 +336,7 @@ siginfo_t *mpx_generate_siginfo(struct p
 		err = -EINVAL;
 		goto err_out;
 	}
+	trace_mpx_bounds_register_exception(info->si_addr, bndreg);
 	return info;
 err_out:
 	/* info might be NULL, but kfree() handles that */
_

Re: [PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Thomas Gleixner]

On Mon, 18 May 2015, Dave Hansen wrote:
> From: Dave Hansen <dave.hansen@linux.intel.com>
> 
> There are two basic things that can happen as the result of
> a bounds exception (#BR):
> 
> 	1. We allocate a new bounds table
> 	2. We pass up a bounds exception to userspace.
> 
> This patch adds a trace point for the case where we are
> passing the exception up to userspace with a signal.
> 
> We are also explicit that we're printing out the inverse of
> the 'upper' that we encounter.  If you want to filter, for
> instance, you need to ~ the value first.  The reason we do
> this is because of how 'upper' is stored in the bounds table.
> If a pointer's range is:
> 
> 	0x1000 -> 0x2000
> 
> it is stored in the bounds table as (32-bits here for brevity):
> 
> 	lower: 0x00001000
> 	upper: 0xffffdfff
> 
> That is so that an all 0's entry:
> 
> 	lower: 0x00000000
> 	upper: 0x00000000
> 
> corresponds to the "init" bounds which store a *range* of:
> 
> 	0x00000000 -> 0xffffffff
> 
> That is, by far, the common case, and that lets us use the
> zero page, or deduplicate the memory, etc... The 'upper'
> stored in the table is gibberish to print by itself, so we
> print ~upper to get the *actual*, logical, human-readable
> value printed out.

Thanks for clarifying that!
 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH 00/19] x86, mpx updates for 4.2 (take 8)

[Dave Hansen]

Changes from take 7 / v22:
 * Add Thomas's reviewed-by
 * merge with tip/x86/fpu changes
 * Fix tiny spelling nit

Changes from take 6 / v21:
 * Address a bunch of Thomas's review comments.

Changes from take 5 / v20:

 * Fix get_xsave_addr() to consult xstate_bv in anticipation
   of fixes to xsave code.
 * Bug fix for when an VMA being unmapped has neighbors which
   are bounds tables.
 * Rewrite unmapping code.  I didn't do this lightly. It was
   not originally my own code, and I resisted changing it
   because it worked.  But, I started bug chasing and decided
   it was unmaintainable.  The rewrite ended up removing
   about 20% of the unmapping code and made it much simpler.

Changes from take 4 / v19:

 * Do not pass a task_struct around when we are
   really just going to operate on current

Changes from take 3 / v18 (all minor):

 * use DECLARE_EVENT_CLASS()/DEFINE_EVENT() for
   the ranged tracepoints to save 10 lines of code.

Changes from take 2 / v17 (all minor):

 * fix a couple of whitespace borkages caught by checkpatch,
   and a spelling error or two.
 * replace printk with pr_info() for boot disable
 * change trace print format for address intervals
 * fix up variable name in tsk_get_xsave_addr() comment
 * remove tsk_get_xsave_field() GPL export
 * fix up Qiaowei's From:

--

Hi x86 maintainers,

There are a few basic things going on here:
1. Make FPU/xsave code preempt safe and work properly
2. Add trace points to make kernel and app debugging easier
3. Add a boot-time disable for mpx
4. Rewrite the unmapping code.
5. Support 32-bit binaries to run on 64-bit kernels

This set is also available against tip/x86/fpu (8c05f05edb) in git:

  git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx.git mpx-v23

Dave Hansen (19):
  x86, mpx, xsave: Fix up bad get_xsave_addr() assumptions
  x86, fpu: Wrap get_xsave_addr() to make it safer
  x86, mpx: Use new get_xsave_field_ptr()
  x86, mpx: Cleanup: Do not pass task around when unnecessary
  x86, mpx: remove redundant MPX_BNDCFG_ADDR_MASK
  x86, mpx: Restrict mmap size check to bounds tables
  x86, mpx: boot-time disable
  x86, mpx: trace #BR exceptions
  x86, mpx: trace entry to bounds exception paths
  x86, mpx: Trace the attempts to find bounds tables
  x86, mpx: trace allocation of new bounds tables
  x86: make is_64bit_mm() widely available
  x86, mpx: Add temporary variable to reduce masking
  x86, mpx: new directory entry to addr helper
  x86, mpx: do 32-bit-only cmpxchg for 32-bit apps
  x86, mpx: support 32-bit binaries on 64-bit kernel
  x86, mpx: rewrite unmap code
  x86, mpx: do not count MPX VMAs as neighbors when unmapping
  x86, mpx: allow mixed binaries again

 Documentation/kernel-parameters.txt |   4 +
 arch/x86/include/asm/fpu/xstate.h   |   1 +
 arch/x86/include/asm/mmu_context.h  |  13 +
 arch/x86/include/asm/mpx.h          |  74 +++---
 arch/x86/include/asm/processor.h    |  12 +-
 arch/x86/include/asm/trace/mpx.h    | 131 ++++++++++
 arch/x86/kernel/cpu/common.c        |  16 ++
 arch/x86/kernel/fpu/xstate.c        |  78 +++++-
 arch/x86/kernel/traps.c             |  18 +-
 arch/x86/kernel/uprobes.c           |  10 +-
 arch/x86/mm/mpx.c                   | 508 ++++++++++++++++++++++--------------
 kernel/sys.c                        |   8 +-
 12 files changed, 606 insertions(+), 267 deletions(-)
 create mode 100644 arch/x86/include/asm/trace/mpx.h

[PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

There are two basic things that can happen as the result of
a bounds exception (#BR):

	1. We allocate a new bounds table
	2. We pass up a bounds exception to userspace.

This patch adds a trace point for the case where we are
passing the exception up to userspace with a signal.

We are also explicit that we're printing out the inverse of
the 'upper' that we encounter.  If you want to filter, for
instance, you need to ~ the value first.  The reason we do
this is because of how 'upper' is stored in the bounds table.
If a pointer's range is:

	0x1000 -> 0x2000

it is stored in the bounds table as (32-bits here for brevity):

	lower: 0x00001000
	upper: 0xffffdfff

That is so that an all 0's entry:

	lower: 0x00000000
	upper: 0x00000000

corresponds to the "init" bounds which store a *range* of:

	0x00000000 -> 0xffffffff

That is, by far, the common case, and that lets us use the
zero page, or deduplicate the memory, etc... The 'upper'
stored in the table is gibberish to print by itself, so we
print ~upper to get the *actual*, logical, human-readable
value printed out.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---

 b/arch/x86/include/asm/trace/mpx.h |   34 ++++++++++++++++++++++++++++++++++
 b/arch/x86/mm/mpx.c                |    1 +
 2 files changed, 35 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1 arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1	2015-05-27 09:32:17.938598834 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-05-27 09:32:17.943599059 -0700
@@ -8,6 +8,40 @@
 
 #ifdef CONFIG_X86_INTEL_MPX
 
+TRACE_EVENT(mpx_bounds_register_exception,
+
+	TP_PROTO(void *addr_referenced,
+		 struct bndreg *bndreg),
+	TP_ARGS(addr_referenced, bndreg),
+
+	TP_STRUCT__entry(
+		__field(void *, addr_referenced)
+		__field(u64, lower_bound)
+		__field(u64, upper_bound)
+	),
+
+	TP_fast_assign(
+		__entry->addr_referenced = addr_referenced;
+		__entry->lower_bound = bndreg->lower_bound;
+		__entry->upper_bound = bndreg->upper_bound;
+	),
+	/*
+	 * Note that we are printing out the '~' of the upper
+	 * bounds register here.  It is actually stored in its
+	 * one's complement form so that its 'init' state
+	 * corresponds to all 0's.  But, that looks like
+	 * gibberish when printed out, so print out the 1's
+	 * complement instead of the actual value here.  Note
+	 * though that you still need to specify filters for the
+	 * actual value, not the displayed one.
+	 */
+	TP_printk("address referenced: 0x%p bounds: lower: 0x%llx ~upper: 0x%llx",
+		__entry->addr_referenced,
+		__entry->lower_bound,
+		~__entry->upper_bound
+	)
+);
+
 TRACE_EVENT(bounds_exception_mpx,
 
 	TP_PROTO(struct bndcsr *bndcsr),
diff -puN arch/x86/mm/mpx.c~x86-mpx-trace-1 arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-trace-1	2015-05-27 09:32:17.940598924 -0700
+++ b/arch/x86/mm/mpx.c	2015-05-27 09:32:17.944599105 -0700
@@ -335,6 +335,7 @@ siginfo_t *mpx_generate_siginfo(struct p
 		err = -EINVAL;
 		goto err_out;
 	}
+	trace_mpx_bounds_register_exception(info->si_addr, bndreg);
 	return info;
 err_out:
 	/* info might be NULL, but kfree() handles that */
_

[PATCH 00/19] x86, mpx updates for 4.2 (take 9)

[Dave Hansen]

Changes from take 8 / v23:
 * Respond to some of Ingo's comments about get_xsave_field_ptr():
   1. add const in return type, and fix up the cascading need for
      'const' in other parts of the MPX code and tracepoints.
   2. add a local 'fpu' var
   3. Update patch description

Changes from take 7 / v22:
 * Add Thomas's reviewed-by
 * merge with tip/x86/fpu changes
 * Fix tiny spelling nit

Changes from take 6 / v21:
 * Address a bunch of Thomas's review comments.

Changes from take 5 / v20:

 * Fix get_xsave_addr() to consult xstate_bv in anticipation
   of fixes to xsave code.
 * Bug fix for when an VMA being unmapped has neighbors which
   are bounds tables.
 * Rewrite unmapping code.  I didn't do this lightly. It was
   not originally my own code, and I resisted changing it
   because it worked.  But, I started bug chasing and decided
   it was unmaintainable.  The rewrite ended up removing
   about 20% of the unmapping code and made it much simpler.

Changes from take 4 / v19:

 * Do not pass a task_struct around when we are
   really just going to operate on current

Changes from take 3 / v18 (all minor):

 * use DECLARE_EVENT_CLASS()/DEFINE_EVENT() for
   the ranged tracepoints to save 10 lines of code.

Changes from take 2 / v17 (all minor):

 * fix a couple of whitespace borkages caught by checkpatch,
   and a spelling error or two.
 * replace printk with pr_info() for boot disable
 * change trace print format for address intervals
 * fix up variable name in tsk_get_xsave_addr() comment
 * remove tsk_get_xsave_field() GPL export
 * fix up Qiaowei's From:

--

Hi x86 maintainers,

There are a few basic things going on here:
1. Make FPU/xsave code cleaner and less error-prone
2. Add trace points to make kernel and app debugging easier
3. Add a boot-time disable for mpx
4. Rewrite the unmapping code.
5. Support 32-bit binaries to run on 64-bit kernels

This set is also available against tip/x86/fpu (8c05f05edb) in git:

  git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx.git mpx-v24

Dave Hansen (19):
      x86, mpx, xsave: Fix up bad get_xsave_addr() assumptions
      x86, fpu: Wrap get_xsave_addr() to make it safer
      x86, mpx: Use new get_xsave_field_ptr()
      x86, mpx: Cleanup: Do not pass task around when unnecessary
      x86, mpx: remove redundant MPX_BNDCFG_ADDR_MASK
      x86, mpx: Restrict mmap size check to bounds tables
      x86, mpx: boot-time disable
      x86, mpx: trace #BR exceptions
      x86, mpx: trace entry to bounds exception paths
      x86, mpx: Trace the attempts to find bounds tables
      x86, mpx: trace allocation of new bounds tables
      x86: make is_64bit_mm() widely available
      x86, mpx: Add temporary variable to reduce masking
      x86, mpx: new directory entry to addr helper
      x86, mpx: do 32-bit-only cmpxchg for 32-bit apps
      x86, mpx: support 32-bit binaries on 64-bit kernel
      x86, mpx: rewrite unmap code
      x86, mpx: do not count MPX VMAs as neighbors when unmapping
      x86, mpx: allow mixed binaries again

 Documentation/kernel-parameters.txt |   4 +
 arch/x86/include/asm/fpu/xstate.h   |   1 +
 arch/x86/include/asm/mmu_context.h  |  13 +
 arch/x86/include/asm/mpx.h          |  74 ++--
 arch/x86/include/asm/processor.h    |  12 +-
 arch/x86/include/asm/trace/mpx.h    | 132 +++++++
 arch/x86/kernel/cpu/common.c        |  16 +
 arch/x86/kernel/fpu/xstate.c        |  77 ++++-
 arch/x86/kernel/traps.c             |  20 +-
 arch/x86/kernel/uprobes.c           |  10 +-
 arch/x86/mm/mpx.c                   | 514 +++++++++++++++++-----------
 kernel/sys.c                        |   8 +-
 12 files changed, 610 insertions(+), 271 deletions(-)

[PATCH 09/19] x86, mpx: trace entry to bounds exception paths

[Dave Hansen]

From: Dave Hansen <dave.hansen@linux.intel.com>

There are two basic things that can happen as the result of
a bounds exception (#BR):

	1. We allocate a new bounds table
	2. We pass up a bounds exception to userspace.

This patch adds a trace point for the case where we are
passing the exception up to userspace with a signal.

We are also explicit that we're printing out the inverse of
the 'upper' that we encounter.  If you want to filter, for
instance, you need to ~ the value first.  The reason we do
this is because of how 'upper' is stored in the bounds table.
If a pointer's range is:

	0x1000 -> 0x2000

it is stored in the bounds table as (32-bits here for brevity):

	lower: 0x00001000
	upper: 0xffffdfff

That is so that an all 0's entry:

	lower: 0x00000000
	upper: 0x00000000

corresponds to the "init" bounds which store a *range* of:

	0x00000000 -> 0xffffffff

That is, by far, the common case, and that lets us use the
zero page, or deduplicate the memory, etc... The 'upper'
stored in the table is gibberish to print by itself, so we
print ~upper to get the *actual*, logical, human-readable
value printed out.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---

 b/arch/x86/include/asm/trace/mpx.h |   34 ++++++++++++++++++++++++++++++++++
 b/arch/x86/mm/mpx.c                |    1 +
 2 files changed, 35 insertions(+)

diff -puN arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1 arch/x86/include/asm/trace/mpx.h
--- a/arch/x86/include/asm/trace/mpx.h~x86-mpx-trace-1	2015-06-01 10:24:06.504833616 -0700
+++ b/arch/x86/include/asm/trace/mpx.h	2015-06-01 10:24:06.509833841 -0700
@@ -8,6 +8,40 @@
 
 #ifdef CONFIG_X86_INTEL_MPX
 
+TRACE_EVENT(mpx_bounds_register_exception,
+
+	TP_PROTO(void *addr_referenced,
+		 const struct bndreg *bndreg),
+	TP_ARGS(addr_referenced, bndreg),
+
+	TP_STRUCT__entry(
+		__field(void *, addr_referenced)
+		__field(u64, lower_bound)
+		__field(u64, upper_bound)
+	),
+
+	TP_fast_assign(
+		__entry->addr_referenced = addr_referenced;
+		__entry->lower_bound = bndreg->lower_bound;
+		__entry->upper_bound = bndreg->upper_bound;
+	),
+	/*
+	 * Note that we are printing out the '~' of the upper
+	 * bounds register here.  It is actually stored in its
+	 * one's complement form so that its 'init' state
+	 * corresponds to all 0's.  But, that looks like
+	 * gibberish when printed out, so print out the 1's
+	 * complement instead of the actual value here.  Note
+	 * though that you still need to specify filters for the
+	 * actual value, not the displayed one.
+	 */
+	TP_printk("address referenced: 0x%p bounds: lower: 0x%llx ~upper: 0x%llx",
+		__entry->addr_referenced,
+		__entry->lower_bound,
+		~__entry->upper_bound
+	)
+);
+
 TRACE_EVENT(bounds_exception_mpx,
 
 	TP_PROTO(const struct bndcsr *bndcsr),
diff -puN arch/x86/mm/mpx.c~x86-mpx-trace-1 arch/x86/mm/mpx.c
--- a/arch/x86/mm/mpx.c~x86-mpx-trace-1	2015-06-01 10:24:06.506833706 -0700
+++ b/arch/x86/mm/mpx.c	2015-06-01 10:24:06.510833886 -0700
@@ -335,6 +335,7 @@ siginfo_t *mpx_generate_siginfo(struct p
 		err = -EINVAL;
 		goto err_out;
 	}
+	trace_mpx_bounds_register_exception(info->si_addr, bndreg);
 	return info;
 err_out:
 	/* info might be NULL, but kfree() handles that */
_