[PATCH v3 0/4] mfd: Improve DT binding docs for max77686 and max77802

[PATCH v3 0/4] mfd: Improve DT binding docs for max77686 and max77802

[Javier Martinez Canillas]

Hello Lee,

This series contains some improvements for the Device Tree bindings of
the Maxim MAX77686 and MAX77802 multi-function devices.

This is the third version of the series that addresses issues pointed
out by Sergei Shtylyov and you.

Patch #1 changes the max77686 binding to not suggest using a deprecated
property of the regulator DT binding.

Patch #2 changes the max77686 example to use a generic node name instead
of the chip's name.

Patch #3 adds a DT binding for the mfd portion of the max77802 that was
missing.

Patch #4 moves the regulator portion of the max77686 to the regulator's
DT binding sub-directory since it is a better fit for this information.
This fourth patch needs an ack from the regulator sub-system maintainer.

Changes in v3:
 - Fix typo in ePAPR document name. Suggested by Sergei Shtylyov
- Add Krzysztof Kozlowski Reviewed-by tag to patch #3.
- Capitalise all acronyms. Suggested by Lee Jones.
- Use relative path to refer other bindings. Suggested by Lee Jones.
- Use IRQ_TYPE_NONE instead of 0 in example. Suggested by Lee Jones.
- Add Krzysztof Kozlowski Reviewed-by tag to patch #4.
- Add Lee Jones Acked-by tag to patch #4.

Changes in v2:
- Add Krzysztof Kozlowski Reviewed-by tag in patch #1.
- Use the correct "maxim,max77802" compatible string.
  Suggested by Krzysztof Kozlowski
- Use a pmic generic node name for the max77802 node example.
  Suggested by Sergei Shtylyov.
- Use a generic name for the max77686 node in the regulator example.

Javier Martinez Canillas (4):
  mfd: max77686: Don't suggest in binding to use a deprecated property
  mfd: max77686: Use a generic name for the PMIC node in the example
  mfd: Add DT binding for Maxim MAX77802 IC
  mfd: max77686: Split out regulator part from the DT binding

 Documentation/devicetree/bindings/mfd/max77686.txt | 63 ++-----------------
 Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++
 .../devicetree/bindings/regulator/max77686.txt     | 71 ++++++++++++++++++++++
 3 files changed, 101 insertions(+), 59 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/max77686.txt

-- 
2.4.3

[PATCH v3 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property

[Javier Martinez Canillas]

The regulator-compatible property from the regulator DT binding was
deprecated. But the max77686 DT binding doc still suggest to use it
instead of the regulator node name's which is the correct approach.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

---

Changes in v3: None
Changes in v2:
- Add Krzysztof Kozlowski Reviewed-by tag in patch #1.

 Documentation/devicetree/bindings/mfd/max77686.txt | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 163bd81a4607..8221102d3fc2 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -26,7 +26,7 @@ Optional node:
 	};
 	refer Documentation/devicetree/bindings/regulator/regulator.txt
 
-  The regulator-compatible property of regulator should initialized with string
+  The regulator node's name should be initialized with a string
 to get matched with their hardware counterparts as follow:
 
 	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
@@ -55,16 +55,14 @@ Example:
 		reg = <0x09>;
 
 		voltage-regulators {
-			ldo11_reg {
-				regulator-compatible = "LDO11";
+			ldo11_reg: LDO11 {
 				regulator-name = "vdd_ldo11";
 				regulator-min-microvolt = <1900000>;
 				regulator-max-microvolt = <1900000>;
 				regulator-always-on;
 			};
 
-			buck1_reg {
-				regulator-compatible = "BUCK1";
+			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1300000>;
@@ -72,8 +70,7 @@ Example:
 				regulator-boot-on;
 			};
 
-			buck9_reg {
-				regulator-compatible = "BUCK9";
+			buck9_reg: BUCK9 {
 				regulator-name = "CAM_ISP_CORE_1.2V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1200000>;
-- 
2.4.3

[PATCH v3 2/4] mfd: max77686: Use a generic name for the PMIC node in the example

[Javier Martinez Canillas]

The ePAPR standard says that: "the name of a node should be somewhat
generic, reflecting the function of the device and not its precise
programming model."

So, change the max77686 binding document example to use a generic
node name instead of using the chip's name.

Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Changes in v3:
 - Fix typo in ePAPR document name. Suggested by Sergei Shtylyov

Changes in v2: None

 Documentation/devicetree/bindings/mfd/max77686.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 8221102d3fc2..d2ed3c20a5c3 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -48,7 +48,7 @@ to get matched with their hardware counterparts as follow:
 
 Example:
 
-	max77686@09 {
+	max77686: pmic@09 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
-- 
2.4.3

[PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC

[Javier Martinez Canillas]

The MAX77802 is a chip that contains regulators, 2 32kHz clocks,
a RTC and an I2C interface to program the individual components.

The are already DT bindings for the regulators and clocks and
these reference to a bindings/mfd/max77802.txt file, that didn't
exist, for the details about the PMIC.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

---

Changes in v3:
- Add Krzysztof Kozlowski Reviewed-by tag to patch #3.
- Capitalise all acronyms. Suggested by Lee Jones.
- Use relative path to refer other bindings. Suggested by Lee Jones.
- Use IRQ_TYPE_NONE instead of 0 in example. Suggested by Lee Jones.

Changes in v2:
- Use the correct "maxim,max77802" compatible string.
  Suggested by Krzysztof Kozlowski
- Use a pmic generic node name for the max77802 node example.
  Suggested by Sergei Shtylyov.

 Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt

diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
new file mode 100644
index 000000000000..911ec5fcaefd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77802.txt
@@ -0,0 +1,26 @@
+Maxim MAX77802 multi-function device
+
+The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
+efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
+up application processors and peripherals, a 2-channel 32kHz clock outputs,
+a Real-Time-Clock (RTC) and a I2C interface to program the individual
+regulators, clocks outputs and the RTC.
+
+Binding for the built-in 32k clock generator block is defined separately
+in the ../clk/maxim,max77802.txt file and binding for the regulators
+is defined in the ../regulator/max77802.txt file.
+
+Required properties:
+- compatible : Must be "maxim,max77802";
+- reg : Specifies the I2C slave address of PMIC block.
+- interrupts : This I2C device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Example:
+
+	max77802: pmic@09 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&intc>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		reg = <0x09>;
+	};
-- 
2.4.3

[PATCH v3 4/4] mfd: max77686: Split out regulator part from the DT binding

[Javier Martinez Canillas]

The Maxim MAX77686 PMIC is a multi-function device with regulators,
clocks and a RTC. The DT bindings for the clocks are in a separate
file but the bindings for the regulators are inside the mfd part.

To make it consistent with the clocks portion of the binding and
because is more natural to look for regulator bindings under the
bindings/regulator sub-directory, split the regulator portion of
the DT binding and add it as a separate file.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>

---

Changes in v3:
- Add Krzysztof Kozlowski Reviewed-by tag to patch #4.
- Add Lee Jones Acked-by tag to patch #4.

Changes in v2:
- Use a generic name for the max77686 node in the regulator example.

 Documentation/devicetree/bindings/mfd/max77686.txt | 58 +-----------------
 .../devicetree/bindings/regulator/max77686.txt     | 71 ++++++++++++++++++++++
 2 files changed, 74 insertions(+), 55 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/max77686.txt

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index d2ed3c20a5c3..1225547523e6 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -8,7 +8,8 @@ client while probing.This document describes the binding for mfd device and
 PMIC submodule.
 
 Binding for the built-in 32k clock generator block is defined separately
-in bindings/clk/maxim,max77686.txt file.
+in the ../clk/maxim,max77686.txt file and binding for the regulators
+is defined in the ../regulator/max77686.txt file.
 
 Required properties:
 - compatible : Must be "maxim,max77686";
@@ -16,36 +17,6 @@ Required properties:
 - interrupts : This i2c device has an IRQ line connected to the main SoC.
 - interrupt-parent : The parent interrupt controller.
 
-Optional node:
-- voltage-regulators : The regulators of max77686 have to be instantiated
-  under subnode named "voltage-regulators" using the following format.
-
-	regulator_name {
-		regulator-compatible = LDOn/BUCKn
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-  The regulator node's name should be initialized with a string
-to get matched with their hardware counterparts as follow:
-
-	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
-		 	example: LDO1, LDO2, LDO26.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
-			example: BUCK1, BUCK5, BUCK9.
-
-  Regulators which can be turned off during system suspend:
-	-LDOn	:	2, 6-8, 10-12, 14-16,
-	-BUCKn	:	1-4.
-  Use standard regulator bindings for it ('regulator-off-in-suspend').
-
-  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
-  control. To turn this feature on this property must be added to the regulator
-  sub-node:
-	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
-				flags are actually ignored and always
-				ACTIVE_HIGH is used)
-
 Example:
 
 	max77686: pmic@09 {
@@ -53,27 +24,4 @@ Example:
 		interrupt-parent = <&wakeup_eint>;
 		interrupts = <26 0>;
 		reg = <0x09>;
-
-		voltage-regulators {
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-	}
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt
new file mode 100644
index 000000000000..0dded64d89d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77686.txt
@@ -0,0 +1,71 @@
+Binding for Maxim MAX77686 regulators
+
+This is a part of the device tree bindings of MAX77686 multi-function device.
+More information can be found in ../mfd/max77686.txt file.
+
+The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+  under subnode named "voltage-regulators" using the following format.
+
+	regulator_name {
+		regulator-compatible = LDOn/BUCKn
+		standard regulator constraints....
+	};
+	refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+  The regulator node's name should be initialized with a string
+to get matched with their hardware counterparts as follow:
+
+	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
+			example: LDO1, LDO2, LDO26.
+	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
+			example: BUCK1, BUCK5, BUCK9.
+
+  Regulators which can be turned off during system suspend:
+	-LDOn	:	2, 6-8, 10-12, 14-16,
+	-BUCKn	:	1-4.
+  Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+  control. To turn this feature on this property must be added to the regulator
+  sub-node:
+	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
+				flags are actually ignored and always
+				ACTIVE_HIGH is used)
+
+Example:
+
+	max77686: pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		reg = <0x09>;
+
+		voltage-regulators {
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+			};
+	};
-- 
2.4.3

Re: [PATCH v3 0/4] mfd: Improve DT binding docs for max77686 and max77802

[Javier Martinez Canillas]

Hello Lee and Mark,

On 07/30/2015 12:32 PM, Javier Martinez Canillas wrote:
> Hello Lee,
> 
> This series contains some improvements for the Device Tree bindings of
> the Maxim MAX77686 and MAX77802 multi-function devices.
> 
> This is the third version of the series that addresses issues pointed
> out by Sergei Shtylyov and you.
> 
> Patch #1 changes the max77686 binding to not suggest using a deprecated
> property of the regulator DT binding.
> 
> Patch #2 changes the max77686 example to use a generic node name instead
> of the chip's name.
> 
> Patch #3 adds a DT binding for the mfd portion of the max77802 that was
> missing.
> 
> Patch #4 moves the regulator portion of the max77686 to the regulator's
> DT binding sub-directory since it is a better fit for this information.
> This fourth patch needs an ack from the regulator sub-system maintainer.
>

Any comments on this series?

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC

[Lee Jones]

On Thu, 30 Jul 2015, Javier Martinez Canillas wrote:

> The MAX77802 is a chip that contains regulators, 2 32kHz clocks,
> a RTC and an I2C interface to program the individual components.
> 
> The are already DT bindings for the regulators and clocks and
> these reference to a bindings/mfd/max77802.txt file, that didn't
> exist, for the details about the PMIC.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> ---
> 
> Changes in v3:
> - Add Krzysztof Kozlowski Reviewed-by tag to patch #3.
> - Capitalise all acronyms. Suggested by Lee Jones.
> - Use relative path to refer other bindings. Suggested by Lee Jones.
> - Use IRQ_TYPE_NONE instead of 0 in example. Suggested by Lee Jones.
> 
> Changes in v2:
> - Use the correct "maxim,max77802" compatible string.
>   Suggested by Krzysztof Kozlowski
> - Use a pmic generic node name for the max77802 node example.
>   Suggested by Sergei Shtylyov.
> 
>  Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
> new file mode 100644
> index 000000000000..911ec5fcaefd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max77802.txt
> @@ -0,0 +1,26 @@
> +Maxim MAX77802 multi-function device
> +
> +The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
> +efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
> +up application processors and peripherals, a 2-channel 32kHz clock outputs,
> +a Real-Time-Clock (RTC) and a I2C interface to program the individual
> +regulators, clocks outputs and the RTC.
> +
> +Binding for the built-in 32k clock generator block is defined separately
> +in the ../clk/maxim,max77802.txt file and binding for the regulators
> +is defined in the ../regulator/max77802.txt file.

  "Bindings for the built-in 32k clock generator block and
   regulators are defined in ../clk/maxim,max77802.txt and
   ../regulator/max77802.txt respectively."

> +Required properties:
> +- compatible : Must be "maxim,max77802";

';' ?

> +- reg : Specifies the I2C slave address of PMIC block.
> +- interrupts : This I2C device has an IRQ line connected to the main SoC.
> +- interrupt-parent : The parent interrupt controller.

I always find this easier on the eye when you:

Required properties:
- compatible		: Must be "maxim,max77802"
- reg			: Specifies the I2C slave address of PMIC block.
- interrupts		: This I2C device has an IRQ line connected to the main SoC.
- interrupt-parent	: The parent interrupt controller.

> +Example:
> +
> +	max77802: pmic@09 {
> +		compatible = "maxim,max77802";
> +		interrupt-parent = <&intc>;
> +		interrupts = <26 IRQ_TYPE_NONE>;
> +		reg = <0x09>;
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 2/4] mfd: max77686: Use a generic name for the PMIC node in the example

[Lee Jones]

On Thu, 30 Jul 2015, Javier Martinez Canillas wrote:

> The ePAPR standard says that: "the name of a node should be somewhat
> generic, reflecting the function of the device and not its precise
> programming model."
> 
> So, change the max77686 binding document example to use a generic
> node name instead of using the chip's name.
> 
> Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> 
> ---
> 
> Changes in v3:
>  - Fix typo in ePAPR document name. Suggested by Sergei Shtylyov
> 
> Changes in v2: None
> 
>  Documentation/devicetree/bindings/mfd/max77686.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
> index 8221102d3fc2..d2ed3c20a5c3 100644
> --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> @@ -48,7 +48,7 @@ to get matched with their hardware counterparts as follow:
>  
>  Example:
>  
> -	max77686@09 {
> +	max77686: pmic@09 {
>  		compatible = "maxim,max77686";
>  		interrupt-parent = <&wakeup_eint>;
>  		interrupts = <26 0>;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 1/4] mfd: max77686: Don't suggest in binding to use a deprecated property

[Lee Jones]

On Thu, 30 Jul 2015, Javier Martinez Canillas wrote:

> The regulator-compatible property from the regulator DT binding was
> deprecated. But the max77686 DT binding doc still suggest to use it
> instead of the regulator node name's which is the correct approach.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> ---
> 
> Changes in v3: None
> Changes in v2:
> - Add Krzysztof Kozlowski Reviewed-by tag in patch #1.
> 
>  Documentation/devicetree/bindings/mfd/max77686.txt | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
> index 163bd81a4607..8221102d3fc2 100644
> --- a/Documentation/devicetree/bindings/mfd/max77686.txt
> +++ b/Documentation/devicetree/bindings/mfd/max77686.txt
> @@ -26,7 +26,7 @@ Optional node:
>  	};
>  	refer Documentation/devicetree/bindings/regulator/regulator.txt
>  
> -  The regulator-compatible property of regulator should initialized with string
> +  The regulator node's name should be initialized with a string
>  to get matched with their hardware counterparts as follow:
>  
>  	-LDOn 	:	for LDOs, where n can lie in range 1 to 26.
> @@ -55,16 +55,14 @@ Example:
>  		reg = <0x09>;
>  
>  		voltage-regulators {
> -			ldo11_reg {
> -				regulator-compatible = "LDO11";
> +			ldo11_reg: LDO11 {
>  				regulator-name = "vdd_ldo11";
>  				regulator-min-microvolt = <1900000>;
>  				regulator-max-microvolt = <1900000>;
>  				regulator-always-on;
>  			};
>  
> -			buck1_reg {
> -				regulator-compatible = "BUCK1";
> +			buck1_reg: BUCK1 {
>  				regulator-name = "vdd_mif";
>  				regulator-min-microvolt = <950000>;
>  				regulator-max-microvolt = <1300000>;
> @@ -72,8 +70,7 @@ Example:
>  				regulator-boot-on;
>  			};
>  
> -			buck9_reg {
> -				regulator-compatible = "BUCK9";
> +			buck9_reg: BUCK9 {
>  				regulator-name = "CAM_ISP_CORE_1.2V";
>  				regulator-min-microvolt = <1000000>;
>  				regulator-max-microvolt = <1200000>;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC

[Javier Martinez Canillas]

Hello Lee,

On 08/11/2015 01:47 PM, Lee Jones wrote:
> On Thu, 30 Jul 2015, Javier Martinez Canillas wrote:
> 
>> The MAX77802 is a chip that contains regulators, 2 32kHz clocks,
>> a RTC and an I2C interface to program the individual components.
>>
>> The are already DT bindings for the regulators and clocks and
>> these reference to a bindings/mfd/max77802.txt file, that didn't
>> exist, for the details about the PMIC.
>>
>> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>>
>> ---
>>
>> Changes in v3:
>> - Add Krzysztof Kozlowski Reviewed-by tag to patch #3.
>> - Capitalise all acronyms. Suggested by Lee Jones.
>> - Use relative path to refer other bindings. Suggested by Lee Jones.
>> - Use IRQ_TYPE_NONE instead of 0 in example. Suggested by Lee Jones.
>>
>> Changes in v2:
>> - Use the correct "maxim,max77802" compatible string.
>>   Suggested by Krzysztof Kozlowski
>> - Use a pmic generic node name for the max77802 node example.
>>   Suggested by Sergei Shtylyov.
>>
>>  Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++
>>  1 file changed, 26 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
>> new file mode 100644
>> index 000000000000..911ec5fcaefd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/max77802.txt
>> @@ -0,0 +1,26 @@
>> +Maxim MAX77802 multi-function device
>> +
>> +The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
>> +efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
>> +up application processors and peripherals, a 2-channel 32kHz clock outputs,
>> +a Real-Time-Clock (RTC) and a I2C interface to program the individual
>> +regulators, clocks outputs and the RTC.
>> +
>> +Binding for the built-in 32k clock generator block is defined separately
>> +in the ../clk/maxim,max77802.txt file and binding for the regulators
>> +is defined in the ../regulator/max77802.txt file.
> 
>   "Bindings for the built-in 32k clock generator block and
>    regulators are defined in ../clk/maxim,max77802.txt and
>    ../regulator/max77802.txt respectively."
> 
>> +Required properties:
>> +- compatible : Must be "maxim,max77802";
> 
> ';' ?
>

err... I've no idea how that ended there. It seems I didn't completely
context switch from coding :-)
 
>> +- reg : Specifies the I2C slave address of PMIC block.
>> +- interrupts : This I2C device has an IRQ line connected to the main SoC.
>> +- interrupt-parent : The parent interrupt controller.
> 
> I always find this easier on the eye when you:
>
> Required properties:
> - compatible		: Must be "maxim,max77802"
> - reg			: Specifies the I2C slave address of PMIC block.
> - interrupts		: This I2C device has an IRQ line connected to the main SoC.
> - interrupt-parent	: The parent interrupt controller.
>

Ok, I'll wait for Mark's feedback and repost with your suggestions. Thanks!

>> +Example:
>> +
>> +	max77802: pmic@09 {
>> +		compatible = "maxim,max77802";
>> +		interrupt-parent = <&intc>;
>> +		interrupts = <26 IRQ_TYPE_NONE>;
>> +		reg = <0x09>;
>> +	};
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America