linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/4] ST PLL improvement
@ 2015-10-05  8:06 Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 1/4] drivers: clk: st: Support for enable/disable in Clockgen PLLs Gabriel Fernandez
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-05  8:06 UTC (permalink / raw)
  To: Maxime Coquelin, Michael Turquette, Stephen Boyd, Gabriel Fernandez
  Cc: Peter Griffin, Pankaj Dev, Olivier Bideau, Geert Uytterhoeven,
	Fabian Frederick, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Srinivas Kandagatla, devicetree,
	linux-kernel, linux-arm-kernel, kernel, linux-clk

Changes in v3:
 - reorganize patch 1 and 2 to avoid a break git bisect

Changes in v2:
 - Add const for st_pll4600c28_418_a9 structure
 - Use readl_relaxed_poll_timeout macro instead Jiffies
 - Add patch to enable stih418 A9 pll via DT.

This patchset is based on '[PATCH 0/2] ST PLL fixes for 4.3'

Gabriel Fernandez (4):
  drivers: clk: st: Support for enable/disable in Clockgen PLLs
  drivers: clk: st: PLL rate change implementation for DVFS
  drivers: clk: st: Correct the pll-type for A9 for stih418
  ARM: STi: DT: Add support for stih418 A9 pll

 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |   1 +
 arch/arm/boot/dts/stih418-clock.dtsi               |   2 +-
 drivers/clk/st/clkgen-mux.c                        |   3 +
 drivers/clk/st/clkgen-pll.c                        | 468 ++++++++++++++++++++-
 drivers/clk/st/clkgen.h                            |   2 +
 5 files changed, 467 insertions(+), 9 deletions(-)

-- 
1.9.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 1/4] drivers: clk: st: Support for enable/disable in Clockgen PLLs
  2015-10-05  8:06 [PATCH v3 0/4] ST PLL improvement Gabriel Fernandez
@ 2015-10-05  8:06 ` Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS Gabriel Fernandez
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-05  8:06 UTC (permalink / raw)
  To: Maxime Coquelin, Michael Turquette, Stephen Boyd, Gabriel Fernandez
  Cc: Peter Griffin, Pankaj Dev, Olivier Bideau, Geert Uytterhoeven,
	Fabian Frederick, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Srinivas Kandagatla, devicetree,
	linux-kernel, linux-arm-kernel, kernel, linux-clk

The patch adds support for enable/disable of the Clockgen PLLs.
clkgen_pll_enable/clkgen_pll_disable added as generic function for all PLLs.

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-pll.c | 60 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 59 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index b2a332c..092f82c 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -18,6 +18,7 @@
 #include <linux/of_address.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/iopoll.h>
 
 #include "clkgen.h"
 
@@ -43,6 +44,7 @@ static DEFINE_SPINLOCK(clkgena_c32_odf_lock);
 
 struct clkgen_pll_data {
 	struct clkgen_field pdn_status;
+	struct clkgen_field pdn_ctrl;
 	struct clkgen_field locked_status;
 	struct clkgen_field mdiv;
 	struct clkgen_field ndiv;
@@ -62,6 +64,7 @@ static const struct clk_ops st_pll1200c32_ops;
 
 static const struct clkgen_pll_data st_pll1600c65_ax = {
 	.pdn_status	= CLKGEN_FIELD(0x0, 0x1,			19),
+	.pdn_ctrl	= CLKGEN_FIELD(0x10,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x0, 0x1,			31),
 	.mdiv		= CLKGEN_FIELD(0x0, C65_MDIV_PLL1600_MASK,	0),
 	.ndiv		= CLKGEN_FIELD(0x0, C65_NDIV_MASK,		8),
@@ -70,6 +73,7 @@ static const struct clkgen_pll_data st_pll1600c65_ax = {
 
 static const struct clkgen_pll_data st_pll800c65_ax = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			19),
+	.pdn_ctrl	= CLKGEN_FIELD(0xC,	0x1,			1),
 	.locked_status	= CLKGEN_FIELD(0x0,	0x1,			31),
 	.mdiv		= CLKGEN_FIELD(0x0,	C65_MDIV_PLL800_MASK,	0),
 	.ndiv		= CLKGEN_FIELD(0x0,	C65_NDIV_MASK,		8),
@@ -79,6 +83,7 @@ static const struct clkgen_pll_data st_pll800c65_ax = {
 
 static const struct clkgen_pll_data st_pll3200c32_a1x_0 = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			31),
+	.pdn_ctrl	= CLKGEN_FIELD(0x18,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x4,	0x1,			31),
 	.ndiv		= CLKGEN_FIELD(0x0,	C32_NDIV_MASK,		0x0),
 	.idf		= CLKGEN_FIELD(0x4,	C32_IDF_MASK,		0x0),
@@ -96,6 +101,7 @@ static const struct clkgen_pll_data st_pll3200c32_a1x_0 = {
 
 static const struct clkgen_pll_data st_pll3200c32_a1x_1 = {
 	.pdn_status	= CLKGEN_FIELD(0xC,	0x1,			31),
+	.pdn_ctrl	= CLKGEN_FIELD(0x18,	0x1,			1),
 	.locked_status	= CLKGEN_FIELD(0x10,	0x1,			31),
 	.ndiv		= CLKGEN_FIELD(0xC,	C32_NDIV_MASK,		0x0),
 	.idf		= CLKGEN_FIELD(0x10,	C32_IDF_MASK,		0x0),
@@ -114,6 +120,7 @@ static const struct clkgen_pll_data st_pll3200c32_a1x_1 = {
 /* 415 specific */
 static const struct clkgen_pll_data st_pll3200c32_a9_415 = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x6C,	0x1,			0),
 	.ndiv		= CLKGEN_FIELD(0x0,	C32_NDIV_MASK,		9),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		22),
@@ -125,6 +132,7 @@ static const struct clkgen_pll_data st_pll3200c32_a9_415 = {
 
 static const struct clkgen_pll_data st_pll3200c32_ddr_415 = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x100,	0x1,			0),
 	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
@@ -137,7 +145,8 @@ static const struct clkgen_pll_data st_pll3200c32_ddr_415 = {
 };
 
 static const struct clkgen_pll_data st_pll1200c32_gpu_415 = {
-	.pdn_status	= CLKGEN_FIELD(0x144,	0x1,			3),
+	.pdn_status	= CLKGEN_FIELD(0x4,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x4,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x168,	0x1,			0),
 	.ldf		= CLKGEN_FIELD(0x0,	C32_LDF_MASK,		3),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		0),
@@ -149,6 +158,7 @@ static const struct clkgen_pll_data st_pll1200c32_gpu_415 = {
 /* 416 specific */
 static const struct clkgen_pll_data st_pll3200c32_a9_416 = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x6C,	0x1,			0),
 	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
@@ -160,6 +170,7 @@ static const struct clkgen_pll_data st_pll3200c32_a9_416 = {
 
 static const struct clkgen_pll_data st_pll3200c32_ddr_416 = {
 	.pdn_status	= CLKGEN_FIELD(0x0,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x0,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x10C,	0x1,			0),
 	.ndiv		= CLKGEN_FIELD(0x8,	C32_NDIV_MASK,		0),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		25),
@@ -173,6 +184,7 @@ static const struct clkgen_pll_data st_pll3200c32_ddr_416 = {
 
 static const struct clkgen_pll_data st_pll1200c32_gpu_416 = {
 	.pdn_status	= CLKGEN_FIELD(0x8E4,	0x1,			3),
+	.pdn_ctrl	= CLKGEN_FIELD(0x8E4,	0x1,			3),
 	.locked_status	= CLKGEN_FIELD(0x90C,	0x1,			0),
 	.ldf		= CLKGEN_FIELD(0x0,	C32_LDF_MASK,		3),
 	.idf		= CLKGEN_FIELD(0x0,	C32_IDF_MASK,		0),
@@ -184,6 +196,7 @@ static const struct clkgen_pll_data st_pll1200c32_gpu_416 = {
 static const struct clkgen_pll_data st_pll3200c32_407_a0 = {
 	/* 407 A0 */
 	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.pdn_ctrl	= CLKGEN_FIELD(0x2a0,	0x1,			8),
 	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
 	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
 	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
@@ -196,6 +209,7 @@ static const struct clkgen_pll_data st_pll3200c32_407_a0 = {
 static const struct clkgen_pll_data st_pll3200c32_cx_0 = {
 	/* 407 C0 PLL0 */
 	.pdn_status	= CLKGEN_FIELD(0x2a0,	0x1,			8),
+	.pdn_ctrl	= CLKGEN_FIELD(0x2a0,	0x1,			8),
 	.locked_status	= CLKGEN_FIELD(0x2a0,	0x1,			24),
 	.ndiv		= CLKGEN_FIELD(0x2a4,	C32_NDIV_MASK,		16),
 	.idf		= CLKGEN_FIELD(0x2a4,	C32_IDF_MASK,		0x0),
@@ -208,6 +222,7 @@ static const struct clkgen_pll_data st_pll3200c32_cx_0 = {
 static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 	/* 407 C0 PLL1 */
 	.pdn_status	= CLKGEN_FIELD(0x2c8,	0x1,			8),
+	.pdn_ctrl	= CLKGEN_FIELD(0x2c8,	0x1,			8),
 	.locked_status	= CLKGEN_FIELD(0x2c8,	0x1,			24),
 	.ndiv		= CLKGEN_FIELD(0x2cc,	C32_NDIV_MASK,		16),
 	.idf		= CLKGEN_FIELD(0x2cc,	C32_IDF_MASK,		0x0),
@@ -220,6 +235,7 @@ static const struct clkgen_pll_data st_pll3200c32_cx_1 = {
 static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	/* 407 A9 */
 	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x1a8,	0x1,			0),
 	.locked_status	= CLKGEN_FIELD(0x87c,	0x1,			0),
 	.ndiv		= CLKGEN_FIELD(0x1b0,	C32_NDIV_MASK,		0),
 	.idf		= CLKGEN_FIELD(0x1a8,	C32_IDF_MASK,		25),
@@ -271,6 +287,40 @@ static int clkgen_pll_is_enabled(struct clk_hw *hw)
 	return !poweroff;
 }
 
+static int clkgen_pll_enable(struct clk_hw *hw)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	void __iomem *base =  pll->regs_base;
+	struct clkgen_field *field = &pll->data->locked_status;
+	int ret = 0;
+	u32 reg;
+
+	if (clkgen_pll_is_enabled(hw))
+		return 0;
+
+	CLKGEN_WRITE(pll, pdn_ctrl, 0);
+
+	ret = readl_relaxed_poll_timeout(base + field->offset, reg,
+			!!((reg >> field->shift) & field->mask),  0, 10000);
+
+	if (!ret)
+		pr_debug("%s:%s enabled\n", __clk_get_name(hw->clk), __func__);
+
+	return ret;
+}
+
+static void clkgen_pll_disable(struct clk_hw *hw)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+
+	if (!clkgen_pll_is_enabled(hw))
+		return;
+
+	CLKGEN_WRITE(pll, pdn_ctrl, 1);
+
+	pr_debug("%s:%s disabled\n", __clk_get_name(hw->clk), __func__);
+}
+
 static unsigned long recalc_stm_pll800c65(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -372,21 +422,29 @@ static unsigned long recalc_stm_pll1200c32(struct clk_hw *hw,
 }
 
 static const struct clk_ops st_pll1600c65_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
 	.is_enabled	= clkgen_pll_is_enabled,
 	.recalc_rate	= recalc_stm_pll1600c65,
 };
 
 static const struct clk_ops st_pll800c65_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
 	.is_enabled	= clkgen_pll_is_enabled,
 	.recalc_rate	= recalc_stm_pll800c65,
 };
 
 static const struct clk_ops stm_pll3200c32_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
 	.is_enabled	= clkgen_pll_is_enabled,
 	.recalc_rate	= recalc_stm_pll3200c32,
 };
 
 static const struct clk_ops st_pll1200c32_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
 	.is_enabled	= clkgen_pll_is_enabled,
 	.recalc_rate	= recalc_stm_pll1200c32,
 };
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS
  2015-10-05  8:06 [PATCH v3 0/4] ST PLL improvement Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 1/4] drivers: clk: st: Support for enable/disable in Clockgen PLLs Gabriel Fernandez
@ 2015-10-05  8:06 ` Gabriel Fernandez
  2015-10-06 18:06   ` Stephen Boyd
  2015-10-05  8:06 ` [PATCH v3 3/4] drivers: clk: st: Correct the pll-type for A9 for stih418 Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 4/4] ARM: STi: DT: Add support for stih418 A9 pll Gabriel Fernandez
  3 siblings, 1 reply; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-05  8:06 UTC (permalink / raw)
  To: Maxime Coquelin, Michael Turquette, Stephen Boyd, Gabriel Fernandez
  Cc: Peter Griffin, Pankaj Dev, Olivier Bideau, Geert Uytterhoeven,
	Fabian Frederick, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Srinivas Kandagatla, devicetree,
	linux-kernel, linux-arm-kernel, kernel, linux-clk

Change A9 PLL rate, as per requirement from the cpufreq framework,
for DVFS. For rate change, the A9 clock needs to be temporarily sourced
from PLL external to A9 and then sourced back to A9-PLL

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 drivers/clk/st/clkgen-mux.c |   3 +
 drivers/clk/st/clkgen-pll.c | 220 ++++++++++++++++++++++++++++++++++++++++++--
 drivers/clk/st/clkgen.h     |   2 +
 3 files changed, 215 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/st/clkgen-mux.c b/drivers/clk/st/clkgen-mux.c
index 4f7f6c0..5dc5ce2 100644
--- a/drivers/clk/st/clkgen-mux.c
+++ b/drivers/clk/st/clkgen-mux.c
@@ -17,6 +17,7 @@
 #include <linux/of_address.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include "clkgen.h"
 
 static DEFINE_SPINLOCK(clkgena_divmux_lock);
 static DEFINE_SPINLOCK(clkgenf_lock);
@@ -576,6 +577,7 @@ static struct clkgen_mux_data stih415_a9_mux_data = {
 	.offset = 0,
 	.shift = 1,
 	.width = 2,
+	.lock = &clkgen_a9_lock,
 };
 static struct clkgen_mux_data stih416_a9_mux_data = {
 	.offset = 0,
@@ -586,6 +588,7 @@ static struct clkgen_mux_data stih407_a9_mux_data = {
 	.offset = 0x1a4,
 	.shift = 0,
 	.width = 2,
+	.lock = &clkgen_a9_lock,
 };
 
 static const struct of_device_id mux_of_match[] = {
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 092f82c..22b6201 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -23,6 +23,7 @@
 #include "clkgen.h"
 
 static DEFINE_SPINLOCK(clkgena_c32_odf_lock);
+DEFINE_SPINLOCK(clkgen_a9_lock);
 
 /*
  * Common PLL configuration register bits for PLL800 and PLL1600 C65
@@ -39,6 +40,7 @@ static DEFINE_SPINLOCK(clkgena_c32_odf_lock);
 #define C32_IDF_MASK (0x7)
 #define C32_ODF_MASK (0x3f)
 #define C32_LDF_MASK (0x7f)
+#define C32_CP_MASK (0x1f)
 
 #define C32_MAX_ODFS (4)
 
@@ -51,15 +53,20 @@ struct clkgen_pll_data {
 	struct clkgen_field pdiv;
 	struct clkgen_field idf;
 	struct clkgen_field ldf;
+	struct clkgen_field cp;
 	unsigned int num_odfs;
 	struct clkgen_field odf[C32_MAX_ODFS];
 	struct clkgen_field odf_gate[C32_MAX_ODFS];
+	bool switch2pll_en;
+	struct clkgen_field switch2pll;
+	spinlock_t *lock;
 	const struct clk_ops *ops;
 };
 
 static const struct clk_ops st_pll1600c65_ops;
 static const struct clk_ops st_pll800c65_ops;
 static const struct clk_ops stm_pll3200c32_ops;
+static const struct clk_ops stm_pll3200c32_a9_ops;
 static const struct clk_ops st_pll1200c32_ops;
 
 static const struct clkgen_pll_data st_pll1600c65_ax = {
@@ -242,7 +249,11 @@ static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	.num_odfs = 1,
 	.odf		= { CLKGEN_FIELD(0x1b0, C32_ODF_MASK,		8) },
 	.odf_gate	= { CLKGEN_FIELD(0x1ac, 0x1,			28) },
-	.ops		= &stm_pll3200c32_ops,
+	.switch2pll_en	= true,
+	.cp		= CLKGEN_FIELD(0x1a8,	C32_CP_MASK,		1),
+	.switch2pll	= CLKGEN_FIELD(0x1a4,	0x1,			1),
+	.lock = &clkgen_a9_lock,
+	.ops		= &stm_pll3200c32_a9_ops,
 };
 
 /**
@@ -268,10 +279,26 @@ struct clkgen_pll {
 	struct clk_hw		hw;
 	struct clkgen_pll_data	*data;
 	void __iomem		*regs_base;
+	spinlock_t	*lock;
+
+	u32 ndiv;
+	u32 idf;
+	u32 odf;
+	u32 cp;
 };
 
 #define to_clkgen_pll(_hw) container_of(_hw, struct clkgen_pll, hw)
 
+struct stm_pll {
+	unsigned long mdiv;
+	unsigned long ndiv;
+	unsigned long pdiv;
+	unsigned long odf;
+	unsigned long idf;
+	unsigned long ldf;
+	unsigned long cp;
+};
+
 static int clkgen_pll_is_locked(struct clk_hw *hw)
 {
 	struct clkgen_pll *pll = to_clkgen_pll(hw);
@@ -287,7 +314,7 @@ static int clkgen_pll_is_enabled(struct clk_hw *hw)
 	return !poweroff;
 }
 
-static int clkgen_pll_enable(struct clk_hw *hw)
+static int __clkgen_pll_enable(struct clk_hw *hw)
 {
 	struct clkgen_pll *pll = to_clkgen_pll(hw);
 	void __iomem *base =  pll->regs_base;
@@ -303,24 +330,62 @@ static int clkgen_pll_enable(struct clk_hw *hw)
 	ret = readl_relaxed_poll_timeout(base + field->offset, reg,
 			!!((reg >> field->shift) & field->mask),  0, 10000);
 
-	if (!ret)
+	if (!ret) {
+		if (pll->data->switch2pll_en)
+			CLKGEN_WRITE(pll, switch2pll, 0);
+
 		pr_debug("%s:%s enabled\n", __clk_get_name(hw->clk), __func__);
+	}
 
 	return ret;
 }
 
-static void clkgen_pll_disable(struct clk_hw *hw)
+static int clkgen_pll_enable(struct clk_hw *hw)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	unsigned long flags = 0;
+	int ret = 0;
+
+	if (pll->lock)
+		spin_lock_irqsave(pll->lock, flags);
+
+	ret = __clkgen_pll_enable(hw);
+
+	if (pll->lock)
+		spin_unlock_irqrestore(pll->lock, flags);
+
+	return ret;
+}
+
+static void __clkgen_pll_disable(struct clk_hw *hw)
 {
 	struct clkgen_pll *pll = to_clkgen_pll(hw);
 
 	if (!clkgen_pll_is_enabled(hw))
 		return;
 
+	if (pll->data->switch2pll_en)
+		CLKGEN_WRITE(pll, switch2pll, 1);
+
 	CLKGEN_WRITE(pll, pdn_ctrl, 1);
 
 	pr_debug("%s:%s disabled\n", __clk_get_name(hw->clk), __func__);
 }
 
+static void clkgen_pll_disable(struct clk_hw *hw)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	unsigned long flags = 0;
+
+	if (pll->lock)
+		spin_lock_irqsave(pll->lock, flags);
+
+	__clkgen_pll_disable(hw);
+
+	if (pll->lock)
+		spin_unlock_irqrestore(pll->lock, flags);
+}
+
 static unsigned long recalc_stm_pll800c65(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -372,6 +437,67 @@ static unsigned long recalc_stm_pll1600c65(struct clk_hw *hw,
 	return rate;
 }
 
+static int clk_pll3200c32_get_params(unsigned long input, unsigned long output,
+			  struct stm_pll *pll)
+{
+	unsigned long i, n;
+	unsigned long deviation = ~0;
+	unsigned long new_freq;
+	long new_deviation;
+	/* Charge pump table: highest ndiv value for cp=6 to 25 */
+	static const unsigned char cp_table[] = {
+		48, 56, 64, 72, 80, 88, 96, 104, 112, 120,
+		128, 136, 144, 152, 160, 168, 176, 184, 192
+	};
+
+	/* Output clock range: 800Mhz to 1600Mhz */
+	if (output < 800000000 || output > 1600000000)
+		return -EINVAL;
+
+	input /= 1000;
+	output /= 1000;
+
+	for (i = 1; i <= 7 && deviation; i++) {
+		n = i * output / (2 * input);
+
+		/* Checks */
+		if (n < 8)
+			continue;
+		if (n > 200)
+			break;
+
+		new_freq = (input * 2 * n) / i;
+
+		new_deviation = abs(new_freq - output);
+
+		if (!new_deviation || new_deviation < deviation) {
+			pll->idf  = i;
+			pll->ndiv = n;
+			deviation = new_deviation;
+		}
+	}
+
+	if (deviation == ~0) /* No solution found */
+		return -EINVAL;
+
+	/* Computing recommended charge pump value */
+	for (pll->cp = 6; pll->ndiv > cp_table[pll->cp-6]; (pll->cp)++)
+		;
+
+	return 0;
+}
+
+static int clk_pll3200c32_get_rate(unsigned long input, struct stm_pll *pll,
+			unsigned long *rate)
+{
+	if (!pll->idf)
+		pll->idf = 1;
+
+	*rate = ((2 * (input / 1000) * pll->ndiv) / pll->idf) * 1000;
+
+	return 0;
+}
+
 static unsigned long recalc_stm_pll3200c32(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -394,6 +520,70 @@ static unsigned long recalc_stm_pll3200c32(struct clk_hw *hw,
 	return rate;
 }
 
+static long round_rate_stm_pll3200c32(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	struct stm_pll params;
+
+	if (!clk_pll3200c32_get_params(*prate, rate, &params))
+		clk_pll3200c32_get_rate(*prate, &params, &rate);
+	else {
+		pr_debug("%s: %s rate %ld Invalid\n", __func__,
+			 __clk_get_name(hw->clk), rate);
+		return 0;
+	}
+
+	pr_debug("%s: %s new rate %ld [ndiv=%u] [idf=%u]\n",
+		 __func__, __clk_get_name(hw->clk),
+		 rate, (unsigned int)params.ndiv,
+		 (unsigned int)params.idf);
+
+	return rate;
+}
+
+static int set_rate_stm_pll3200c32(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	struct stm_pll params;
+	long hwrate = 0;
+	unsigned long flags = 0;
+
+	if (!rate || !parent_rate)
+		return -EINVAL;
+
+	if (!clk_pll3200c32_get_params(parent_rate, rate, &params))
+		clk_pll3200c32_get_rate(parent_rate, &params, &hwrate);
+
+	pr_debug("%s: %s new rate %ld [ndiv=0x%x] [idf=0x%x]\n",
+		 __func__, __clk_get_name(hw->clk),
+		 hwrate, (unsigned int)params.ndiv,
+		 (unsigned int)params.idf);
+
+	if (!hwrate)
+		return -EINVAL;
+
+	pll->ndiv = params.ndiv;
+	pll->idf = params.idf;
+	pll->cp = params.cp;
+
+	__clkgen_pll_disable(hw);
+
+	if (pll->lock)
+		spin_lock_irqsave(pll->lock, flags);
+
+	CLKGEN_WRITE(pll, ndiv, pll->ndiv);
+	CLKGEN_WRITE(pll, idf, pll->idf);
+	CLKGEN_WRITE(pll, cp, pll->cp);
+
+	if (pll->lock)
+		spin_unlock_irqrestore(pll->lock, flags);
+
+	__clkgen_pll_enable(hw);
+
+	return 0;
+}
+
 static unsigned long recalc_stm_pll1200c32(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -442,6 +632,15 @@ static const struct clk_ops stm_pll3200c32_ops = {
 	.recalc_rate	= recalc_stm_pll3200c32,
 };
 
+static const struct clk_ops stm_pll3200c32_a9_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
+	.is_enabled	= clkgen_pll_is_enabled,
+	.recalc_rate	= recalc_stm_pll3200c32,
+	.round_rate	= round_rate_stm_pll3200c32,
+	.set_rate	= set_rate_stm_pll3200c32,
+};
+
 static const struct clk_ops st_pll1200c32_ops = {
 	.enable		= clkgen_pll_enable,
 	.disable	= clkgen_pll_disable,
@@ -452,7 +651,7 @@ static const struct clk_ops st_pll1200c32_ops = {
 static struct clk * __init clkgen_pll_register(const char *parent_name,
 				struct clkgen_pll_data	*pll_data,
 				void __iomem *reg,
-				const char *clk_name)
+				const char *clk_name, spinlock_t *lock)
 {
 	struct clkgen_pll *pll;
 	struct clk *clk;
@@ -558,7 +757,7 @@ static void __init clkgena_c65_pll_setup(struct device_node *np)
 	 */
 	clk_data->clks[0] = clkgen_pll_register(parent_name,
 			(struct clkgen_pll_data *) &st_pll1600c65_ax,
-			reg + CLKGENAx_PLL0_OFFSET, clk_name);
+			reg + CLKGENAx_PLL0_OFFSET, clk_name, NULL);
 
 	if (IS_ERR(clk_data->clks[0]))
 		goto err;
@@ -587,7 +786,7 @@ static void __init clkgena_c65_pll_setup(struct device_node *np)
 	 */
 	clk_data->clks[2] = clkgen_pll_register(parent_name,
 			(struct clkgen_pll_data *) &st_pll800c65_ax,
-			reg + CLKGENAx_PLL1_OFFSET, clk_name);
+			reg + CLKGENAx_PLL1_OFFSET, clk_name, NULL);
 
 	if (IS_ERR(clk_data->clks[2]))
 		goto err;
@@ -614,7 +813,7 @@ static struct clk * __init clkgen_odf_register(const char *parent_name,
 	struct clk_gate *gate;
 	struct clk_divider *div;
 
-	flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_GATE;
+	flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT;
 
 	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
 	if (!gate)
@@ -722,7 +921,8 @@ static void __init clkgen_c32_pll_setup(struct device_node *np)
 	if (!pll_base)
 		return;
 
-	clk = clkgen_pll_register(parent_name, data, pll_base, np->name);
+	clk = clkgen_pll_register(parent_name, data, pll_base, np->name,
+				  data->lock);
 	if (IS_ERR(clk))
 		return;
 
@@ -811,7 +1011,7 @@ static void __init clkgengpu_c32_pll_setup(struct device_node *np)
 	/*
 	 * PLL 1200MHz output
 	 */
-	clk = clkgen_pll_register(parent_name, data, reg, clk_name);
+	clk = clkgen_pll_register(parent_name, data, reg, clk_name, data->lock);
 
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
diff --git a/drivers/clk/st/clkgen.h b/drivers/clk/st/clkgen.h
index 35c8632..f7ec2d9 100644
--- a/drivers/clk/st/clkgen.h
+++ b/drivers/clk/st/clkgen.h
@@ -9,6 +9,8 @@ Copyright (C) 2014 STMicroelectronics
 #ifndef __CLKGEN_INFO_H
 #define __CLKGEN_INFO_H
 
+extern spinlock_t clkgen_a9_lock;
+
 struct clkgen_field {
 	unsigned int offset;
 	unsigned int mask;
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 3/4] drivers: clk: st: Correct the pll-type for A9 for stih418
  2015-10-05  8:06 [PATCH v3 0/4] ST PLL improvement Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 1/4] drivers: clk: st: Support for enable/disable in Clockgen PLLs Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS Gabriel Fernandez
@ 2015-10-05  8:06 ` Gabriel Fernandez
  2015-10-05  8:06 ` [PATCH v3 4/4] ARM: STi: DT: Add support for stih418 A9 pll Gabriel Fernandez
  3 siblings, 0 replies; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-05  8:06 UTC (permalink / raw)
  To: Maxime Coquelin, Michael Turquette, Stephen Boyd, Gabriel Fernandez
  Cc: Peter Griffin, Pankaj Dev, Olivier Bideau, Geert Uytterhoeven,
	Fabian Frederick, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Srinivas Kandagatla, devicetree,
	linux-kernel, linux-arm-kernel, kernel, linux-clk

Add support for new PLL-type for stih418 A9-PLL.
Currently the 407_A9_PLL type being used, it is corrected with this patch
4600c28 PLL allows to reach higher frequencies
so its programming algorithm is extended.

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/clock/st/st,clkgen-pll.txt |   1 +
 drivers/clk/st/clkgen-pll.c                        | 194 +++++++++++++++++++++
 2 files changed, 195 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index e2c6db0..8f84c81 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -23,6 +23,7 @@ Required properties:
 	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,plls-c32-cx_0",		"st,clkgen-plls-c32"
 	"st,plls-c32-cx_1",		"st,clkgen-plls-c32"
+	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index 22b6201..ba75cae 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -44,6 +44,13 @@ DEFINE_SPINLOCK(clkgen_a9_lock);
 
 #define C32_MAX_ODFS (4)
 
+/*
+ * PLL configuration register bits for PLL4600 C28
+ */
+#define C28_NDIV_MASK (0xff)
+#define C28_IDF_MASK (0x7)
+#define C28_ODF_MASK (0x3f)
+
 struct clkgen_pll_data {
 	struct clkgen_field pdn_status;
 	struct clkgen_field pdn_ctrl;
@@ -68,6 +75,7 @@ static const struct clk_ops st_pll800c65_ops;
 static const struct clk_ops stm_pll3200c32_ops;
 static const struct clk_ops stm_pll3200c32_a9_ops;
 static const struct clk_ops st_pll1200c32_ops;
+static const struct clk_ops stm_pll4600c28_ops;
 
 static const struct clkgen_pll_data st_pll1600c65_ax = {
 	.pdn_status	= CLKGEN_FIELD(0x0, 0x1,			19),
@@ -256,6 +264,22 @@ static const struct clkgen_pll_data st_pll3200c32_407_a9 = {
 	.ops		= &stm_pll3200c32_a9_ops,
 };
 
+static struct clkgen_pll_data st_pll4600c28_418_a9 = {
+	/* 418 A9 */
+	.pdn_status	= CLKGEN_FIELD(0x1a8,	0x1,			0),
+	.pdn_ctrl	= CLKGEN_FIELD(0x1a8,	0x1,			0),
+	.locked_status	= CLKGEN_FIELD(0x87c,	0x1,			0),
+	.ndiv		= CLKGEN_FIELD(0x1b0,	C28_NDIV_MASK,		0),
+	.idf		= CLKGEN_FIELD(0x1a8,	C28_IDF_MASK,		25),
+	.num_odfs = 1,
+	.odf		= { CLKGEN_FIELD(0x1b0, C28_ODF_MASK,		8) },
+	.odf_gate	= { CLKGEN_FIELD(0x1ac, 0x1,			28) },
+	.switch2pll_en	= true,
+	.switch2pll	= CLKGEN_FIELD(0x1a4,	0x1,			1),
+	.lock		= &clkgen_a9_lock,
+	.ops		= &stm_pll4600c28_ops,
+};
+
 /**
  * DOC: Clock Generated by PLL, rate set and enabled by bootloader
  *
@@ -611,6 +635,163 @@ static unsigned long recalc_stm_pll1200c32(struct clk_hw *hw,
 	return rate;
 }
 
+/* PLL output structure
+ * FVCO >> /2 >> FVCOBY2 (no output)
+ *                 |> Divider (ODF) >> PHI
+ *
+ * FVCOby2 output = (input * 2 * NDIV) / IDF (assuming FRAC_CONTROL==L)
+ *
+ * Rules:
+ *   4Mhz <= INFF input <= 350Mhz
+ *   4Mhz <= INFIN (INFF / IDF) <= 50Mhz
+ *   19.05Mhz <= FVCOby2 output (PHI w ODF=1) <= 3000Mhz
+ *   1 <= i (register/dec value for IDF) <= 7
+ *   8 <= n (register/dec value for NDIV) <= 246
+ */
+
+static int clk_pll4600c28_get_params(unsigned long input, unsigned long output,
+			  struct stm_pll *pll)
+{
+
+	unsigned long i, infin, n;
+	unsigned long deviation = ~0;
+	unsigned long new_freq, new_deviation;
+
+	/* Output clock range: 19Mhz to 3000Mhz */
+	if (output < 19000000 || output > 3000000000u)
+		return -EINVAL;
+
+	/* For better jitter, IDF should be smallest and NDIV must be maximum */
+	for (i = 1; i <= 7 && deviation; i++) {
+		/* INFIN checks */
+		infin = input / i;
+		if (infin < 4000000 || infin > 50000000)
+			continue;	/* Invalid case */
+
+		n = output / (infin * 2);
+		if (n < 8 || n > 246)
+			continue;	/* Invalid case */
+		if (n < 246)
+			n++;	/* To work around 'y' when n=x.y */
+
+		for (; n >= 8 && deviation; n--) {
+			new_freq = infin * 2 * n;
+			if (new_freq < output)
+				break;	/* Optimization: shorting loop */
+
+			new_deviation = new_freq - output;
+			if (!new_deviation || new_deviation < deviation) {
+				pll->idf  = i;
+				pll->ndiv = n;
+				deviation = new_deviation;
+			}
+		}
+	}
+
+	if (deviation == ~0) /* No solution found */
+		return -EINVAL;
+
+	return 0;
+}
+
+static int clk_pll4600c28_get_rate(unsigned long input, struct stm_pll *pll,
+			unsigned long *rate)
+{
+	if (!pll->idf)
+		pll->idf = 1;
+
+	*rate = (input / pll->idf) * 2 * pll->ndiv;
+
+	return 0;
+}
+
+static unsigned long recalc_stm_pll4600c28(struct clk_hw *hw,
+				    unsigned long parent_rate)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	struct stm_pll params;
+	unsigned long rate;
+
+	if (!clkgen_pll_is_enabled(hw) || !clkgen_pll_is_locked(hw))
+		return 0;
+
+	params.ndiv = CLKGEN_READ(pll, ndiv);
+	params.idf = CLKGEN_READ(pll, idf);
+
+	clk_pll4600c28_get_rate(parent_rate, &params, &rate);
+
+	pr_debug("%s:%s rate %lu\n", __clk_get_name(hw->clk), __func__, rate);
+
+	return rate;
+}
+
+static long round_rate_stm_pll4600c28(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	struct stm_pll params;
+
+	if (!clk_pll4600c28_get_params(*prate, rate, &params)) {
+		clk_pll4600c28_get_rate(*prate, &params, &rate);
+	} else {
+		pr_debug("%s: %s rate %ld Invalid\n", __func__,
+			 __clk_get_name(hw->clk), rate);
+		return 0;
+	}
+
+	pr_debug("%s: %s new rate %ld [ndiv=%u] [idf=%u]\n",
+		 __func__, __clk_get_name(hw->clk),
+		 rate, (unsigned int)params.ndiv,
+		 (unsigned int)params.idf);
+
+	return rate;
+}
+
+static int set_rate_stm_pll4600c28(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct clkgen_pll *pll = to_clkgen_pll(hw);
+	struct stm_pll params;
+	long hwrate;
+	unsigned long flags = 0;
+
+	if (!rate || !parent_rate)
+		return -EINVAL;
+
+	if (!clk_pll4600c28_get_params(parent_rate, rate, &params)) {
+		clk_pll4600c28_get_rate(parent_rate, &params, &hwrate);
+	} else {
+		pr_debug("%s: %s rate %ld Invalid\n", __func__,
+			 __clk_get_name(hw->clk), rate);
+		return -EINVAL;
+	}
+
+	pr_debug("%s: %s new rate %ld [ndiv=0x%x] [idf=0x%x]\n",
+		 __func__, __clk_get_name(hw->clk),
+		 hwrate, (unsigned int)params.ndiv,
+		 (unsigned int)params.idf);
+
+	if (!hwrate)
+		return -EINVAL;
+
+	pll->ndiv = params.ndiv;
+	pll->idf = params.idf;
+
+	__clkgen_pll_disable(hw);
+
+	if (pll->lock)
+		spin_lock_irqsave(pll->lock, flags);
+
+	CLKGEN_WRITE(pll, ndiv, pll->ndiv);
+	CLKGEN_WRITE(pll, idf, pll->idf);
+
+	if (pll->lock)
+		spin_unlock_irqrestore(pll->lock, flags);
+
+	__clkgen_pll_enable(hw);
+
+	return 0;
+}
+
 static const struct clk_ops st_pll1600c65_ops = {
 	.enable		= clkgen_pll_enable,
 	.disable	= clkgen_pll_disable,
@@ -648,6 +829,15 @@ static const struct clk_ops st_pll1200c32_ops = {
 	.recalc_rate	= recalc_stm_pll1200c32,
 };
 
+static const struct clk_ops stm_pll4600c28_ops = {
+	.enable		= clkgen_pll_enable,
+	.disable	= clkgen_pll_disable,
+	.is_enabled	= clkgen_pll_is_enabled,
+	.recalc_rate	= recalc_stm_pll4600c28,
+	.round_rate	= round_rate_stm_pll4600c28,
+	.set_rate	= set_rate_stm_pll4600c28,
+};
+
 static struct clk * __init clkgen_pll_register(const char *parent_name,
 				struct clkgen_pll_data	*pll_data,
 				void __iomem *reg,
@@ -892,6 +1082,10 @@ static const struct of_device_id c32_pll_of_match[] = {
 		.compatible = "st,stih407-plls-c32-a9",
 		.data = &st_pll3200c32_407_a9,
 	},
+	{
+		.compatible = "st,stih418-plls-c28-a9",
+		.data = &st_pll4600c28_418_a9,
+	},
 	{}
 };
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v3 4/4] ARM: STi: DT: Add support for stih418 A9 pll
  2015-10-05  8:06 [PATCH v3 0/4] ST PLL improvement Gabriel Fernandez
                   ` (2 preceding siblings ...)
  2015-10-05  8:06 ` [PATCH v3 3/4] drivers: clk: st: Correct the pll-type for A9 for stih418 Gabriel Fernandez
@ 2015-10-05  8:06 ` Gabriel Fernandez
  3 siblings, 0 replies; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-05  8:06 UTC (permalink / raw)
  To: Maxime Coquelin, Michael Turquette, Stephen Boyd, Gabriel Fernandez
  Cc: Peter Griffin, Pankaj Dev, Olivier Bideau, Geert Uytterhoeven,
	Fabian Frederick, Rob Herring, Pawel Moll, Mark Rutland,
	Ian Campbell, Kumar Gala, Srinivas Kandagatla, devicetree,
	linux-kernel, linux-arm-kernel, kernel, linux-clk

Add support for new PLL-type for stih418 A9-PLL.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 arch/arm/boot/dts/stih418-clock.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 148e177..ae6d997 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS
  2015-10-05  8:06 ` [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS Gabriel Fernandez
@ 2015-10-06 18:06   ` Stephen Boyd
  2015-10-07  7:47     ` Gabriel Fernandez
  0 siblings, 1 reply; 7+ messages in thread
From: Stephen Boyd @ 2015-10-06 18:06 UTC (permalink / raw)
  To: Gabriel Fernandez
  Cc: Maxime Coquelin, Michael Turquette, Peter Griffin, Pankaj Dev,
	Olivier Bideau, Geert Uytterhoeven, Fabian Frederick,
	Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	Srinivas Kandagatla, devicetree, linux-kernel, linux-arm-kernel,
	kernel, linux-clk

On 10/05, Gabriel Fernandez wrote:
> @@ -452,7 +651,7 @@ static const struct clk_ops st_pll1200c32_ops = {
>  static struct clk * __init clkgen_pll_register(const char *parent_name,
>  				struct clkgen_pll_data	*pll_data,
>  				void __iomem *reg,
> -				const char *clk_name)
> +				const char *clk_name, spinlock_t *lock)

Is there a reason we pass lock here but never use it in this
function?

>  {
>  	struct clkgen_pll *pll;
>  	struct clk *clk;

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS
  2015-10-06 18:06   ` Stephen Boyd
@ 2015-10-07  7:47     ` Gabriel Fernandez
  0 siblings, 0 replies; 7+ messages in thread
From: Gabriel Fernandez @ 2015-10-07  7:47 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Maxime Coquelin, Michael Turquette, Peter Griffin, Pankaj Dev,
	Olivier Bideau, Geert Uytterhoeven, Fabian Frederick,
	Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
	Srinivas Kandagatla, devicetree, linux-kernel, linux-arm-kernel,
	kernel, linux-clk

Hi Stephen,

No there is no reason. I will fix it.

Thanks for review.

Best regards

Gabriel

On 6 October 2015 at 20:06, Stephen Boyd <sboyd@codeaurora.org> wrote:
> On 10/05, Gabriel Fernandez wrote:
>> @@ -452,7 +651,7 @@ static const struct clk_ops st_pll1200c32_ops = {
>>  static struct clk * __init clkgen_pll_register(const char *parent_name,
>>                               struct clkgen_pll_data  *pll_data,
>>                               void __iomem *reg,
>> -                             const char *clk_name)
>> +                             const char *clk_name, spinlock_t *lock)
>
> Is there a reason we pass lock here but never use it in this
> function?
>
>>  {
>>       struct clkgen_pll *pll;
>>       struct clk *clk;
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2015-10-07  7:48 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-05  8:06 [PATCH v3 0/4] ST PLL improvement Gabriel Fernandez
2015-10-05  8:06 ` [PATCH v3 1/4] drivers: clk: st: Support for enable/disable in Clockgen PLLs Gabriel Fernandez
2015-10-05  8:06 ` [PATCH v3 2/4] drivers: clk: st: PLL rate change implementation for DVFS Gabriel Fernandez
2015-10-06 18:06   ` Stephen Boyd
2015-10-07  7:47     ` Gabriel Fernandez
2015-10-05  8:06 ` [PATCH v3 3/4] drivers: clk: st: Correct the pll-type for A9 for stih418 Gabriel Fernandez
2015-10-05  8:06 ` [PATCH v3 4/4] ARM: STi: DT: Add support for stih418 A9 pll Gabriel Fernandez

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).