* [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings
@ 2015-12-17 13:33 Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 1/2] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 Peter Ujfalusi
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2015-12-17 13:33 UTC (permalink / raw)
To: arnd, tony
Cc: nsekhar, linux-arm-kernel, devicetree, linux-kernel, vinod.koul,
balbi, linux-omap
Hi,
Changes since v1:
- Updated to use the non 16bit arrays [1]
- send the two patch as a series
[1]
As it has been discussed earlier:
https://www.mail-archive.com/linux-omap@vger.kernel.org/msg122117.html
the DT bindings has been changes compared to what we had in 4.4-rc1: the arrays
now don't have the 16bit type.
The changes are now merged to mainline and Vinod provided us a branch:
git://git.infradead.org/users/vkoul/slave-dma.git fix/edma
Which is based on 4.4-rc1 and only contains the two patch for changing the eDMA
bindings.
Regards,
Peter
---
Peter Ujfalusi (2):
ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
ARM: DTS: am437x: Use the new DT bindings for the eDMA3
arch/arm/boot/dts/am335x-evm.dts | 9 +---
arch/arm/boot/dts/am335x-pepper.dts | 11 +----
arch/arm/boot/dts/am33xx.dtsi | 94 ++++++++++++++++++++++++++-----------
arch/arm/boot/dts/am4372.dtsi | 80 +++++++++++++++++++++++--------
arch/arm/boot/dts/am437x-gp-evm.dts | 9 +---
5 files changed, 133 insertions(+), 70 deletions(-)
--
2.6.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v02 1/2] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
2015-12-17 13:33 [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Peter Ujfalusi
@ 2015-12-17 13:33 ` Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 2/2] ARM: DTS: am437x: " Peter Ujfalusi
2015-12-17 17:48 ` [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Tony Lindgren
2 siblings, 0 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2015-12-17 13:33 UTC (permalink / raw)
To: arnd, tony
Cc: nsekhar, linux-arm-kernel, devicetree, linux-kernel, vinod.koul,
balbi, linux-omap
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and
enable the DMA even crossbar with ti,am335x-edma-crossbar.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 9 +---
arch/arm/boot/dts/am335x-pepper.dts | 11 +----
arch/arm/boot/dts/am33xx.dtsi | 94 ++++++++++++++++++++++++++-----------
3 files changed, 71 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 4caf074063fe..a55072fb6646 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -743,8 +743,8 @@
&mmc3 {
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
status = "okay";
vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +766,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
&sham {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 9cb77a120319..4dd4f71498e5 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -339,13 +339,6 @@
ti,non-removable;
};
-&edma {
- /* Map eDMA MMC2 Events from Crossbar */
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
-
&mmc3 {
/* Wifi & Bluetooth on MMC #3 */
status = "okay";
@@ -354,8 +347,8 @@
vmmmc-supply = <&v3v3c_reg>;
bus-width = <4>;
ti,non-removable;
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9b8861891bf0..04885f9f959e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -161,6 +161,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -174,12 +182,44 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x40>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <12 13 14>;
- #dma-cells = <1>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
};
gpio0: gpio@44e07000 {
@@ -233,7 +273,7 @@
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
- dmas = <&edma 26>, <&edma 27>;
+ dmas = <&edma 26 0>, <&edma 27 0>;
dma-names = "tx", "rx";
};
@@ -244,7 +284,7 @@
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
- dmas = <&edma 28>, <&edma 29>;
+ dmas = <&edma 28 0>, <&edma 29 0>;
dma-names = "tx", "rx";
};
@@ -255,7 +295,7 @@
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
- dmas = <&edma 30>, <&edma 31>;
+ dmas = <&edma 30 0>, <&edma 31 0>;
dma-names = "tx", "rx";
};
@@ -322,8 +362,8 @@
ti,dual-volt;
ti,needs-special-reset;
ti,needs-special-hs-handling;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma_xbar 24 0 0
+ &edma_xbar 25 0 0>;
dma-names = "tx", "rx";
interrupts = <64>;
interrupt-parent = <&intc>;
@@ -335,8 +375,8 @@
compatible = "ti,omap4-hsmmc";
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0
+ &edma 3 0>;
dma-names = "tx", "rx";
interrupts = <28>;
interrupt-parent = <&intc>;
@@ -474,10 +514,10 @@
interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
- dmas = <&edma 16
- &edma 17
- &edma 18
- &edma 19>;
+ dmas = <&edma 16 0
+ &edma 17 0
+ &edma 18 0
+ &edma 19 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -490,10 +530,10 @@
interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
- dmas = <&edma 42
- &edma 43
- &edma 44
- &edma 45>;
+ dmas = <&edma 42 0
+ &edma 43 0
+ &edma 44 0
+ &edma 45 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -833,7 +873,7 @@
ti,hwmods = "sham";
reg = <0x53100000 0x200>;
interrupts = <109>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
};
@@ -842,8 +882,8 @@
ti,hwmods = "aes";
reg = <0x53500000 0xa0>;
interrupts = <103>;
- dmas = <&edma 6>,
- <&edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -856,8 +896,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -870,8 +910,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
--
2.6.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v02 2/2] ARM: DTS: am437x: Use the new DT bindings for the eDMA3
2015-12-17 13:33 [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 1/2] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 Peter Ujfalusi
@ 2015-12-17 13:33 ` Peter Ujfalusi
2015-12-17 17:48 ` [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Tony Lindgren
2 siblings, 0 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2015-12-17 13:33 UTC (permalink / raw)
To: arnd, tony
Cc: nsekhar, linux-arm-kernel, devicetree, linux-kernel, vinod.koul,
balbi, linux-omap
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and
enable the DMA even crossbar with ti,am335x-edma-crossbar.
With the new bindings boards can customize and tweak the DMA channel
priority to match their needs. With the new binding the memcpy is safe
to be used since with the old binding it was not possible for a driver
to know which channel is allowed to be used as non HW triggered channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 80 +++++++++++++++++++++++++++----------
arch/arm/boot/dts/am437x-gp-evm.dts | 9 +----
2 files changed, 62 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index e363af1e17c6..ddcb92ebebbc 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -172,6 +172,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -184,14 +192,46 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x10>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <32 33>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
};
uart0: serial@44e09000 {
@@ -496,8 +536,8 @@
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma 24 0>,
+ <&edma 25 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -508,8 +548,8 @@
reg = <0x481d8000 0x1000>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0>,
+ <&edma 3 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -777,7 +817,7 @@
compatible = "ti,omap5-sham";
ti,hwmods = "sham";
reg = <0x53100000 0x300>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -787,8 +827,8 @@
ti,hwmods = "aes";
reg = <0x53501000 0xa0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 6
- &edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -797,8 +837,8 @@
ti,hwmods = "des";
reg = <0x53701000 0xa0>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 34
- &edma 33>;
+ dmas = <&edma 34 0>,
+ <&edma 33 0>;
dma-names = "tx", "rx";
};
@@ -811,8 +851,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -825,8 +865,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 7f00e85eebed..64d43325bcbc 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -734,8 +734,8 @@
status = "okay";
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 30
- &edma 31>;
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
dma-names = "tx", "rx";
vmmc-supply = <&vmmcwl_fixed>;
bus-width = <4>;
@@ -756,11 +756,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 30
- 2 31>;
-};
-
&uart3 {
status = "okay";
pinctrl-names = "default";
--
2.6.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings
2015-12-17 13:33 [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 1/2] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 2/2] ARM: DTS: am437x: " Peter Ujfalusi
@ 2015-12-17 17:48 ` Tony Lindgren
2015-12-18 5:18 ` Vinod Koul
2 siblings, 1 reply; 6+ messages in thread
From: Tony Lindgren @ 2015-12-17 17:48 UTC (permalink / raw)
To: Peter Ujfalusi
Cc: arnd, nsekhar, linux-arm-kernel, devicetree, linux-kernel,
vinod.koul, balbi, linux-omap
* Peter Ujfalusi <peter.ujfalusi@ti.com> [151217 05:33]:
> Hi,
>
> Changes since v1:
> - Updated to use the non 16bit arrays [1]
> - send the two patch as a series
>
> [1]
> As it has been discussed earlier:
> https://www.mail-archive.com/linux-omap@vger.kernel.org/msg122117.html
>
> the DT bindings has been changes compared to what we had in 4.4-rc1: the arrays
> now don't have the 16bit type.
> The changes are now merged to mainline and Vinod provided us a branch:
>
> git://git.infradead.org/users/vkoul/slave-dma.git fix/edma
>
> Which is based on 4.4-rc1 and only contains the two patch for changing the eDMA
> bindings.
Great, I'll merge the fix/edma also into omap-for-v4.5/dt and apply
your two patches.
Regards,
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings
2015-12-17 17:48 ` [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Tony Lindgren
@ 2015-12-18 5:18 ` Vinod Koul
2015-12-18 13:46 ` Tony Lindgren
0 siblings, 1 reply; 6+ messages in thread
From: Vinod Koul @ 2015-12-18 5:18 UTC (permalink / raw)
To: Tony Lindgren
Cc: Peter Ujfalusi, arnd, nsekhar, linux-arm-kernel, devicetree,
linux-kernel, balbi, linux-omap
On Thu, Dec 17, 2015 at 09:48:44AM -0800, Tony Lindgren wrote:
> * Peter Ujfalusi <peter.ujfalusi@ti.com> [151217 05:33]:
> > Hi,
> >
> > Changes since v1:
> > - Updated to use the non 16bit arrays [1]
> > - send the two patch as a series
> >
> > [1]
> > As it has been discussed earlier:
> > https://www.mail-archive.com/linux-omap@vger.kernel.org/msg122117.html
> >
> > the DT bindings has been changes compared to what we had in 4.4-rc1: the arrays
> > now don't have the 16bit type.
> > The changes are now merged to mainline and Vinod provided us a branch:
> >
> > git://git.infradead.org/users/vkoul/slave-dma.git fix/edma
> >
> > Which is based on 4.4-rc1 and only contains the two patch for changing the eDMA
> > bindings.
>
> Great, I'll merge the fix/edma also into omap-for-v4.5/dt and apply
> your two patches.
FWIW, fix/edma is in Linu's tree now and should be in -rc6
Thanks
--
~Vinod
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings
2015-12-18 5:18 ` Vinod Koul
@ 2015-12-18 13:46 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2015-12-18 13:46 UTC (permalink / raw)
To: Vinod Koul
Cc: Peter Ujfalusi, arnd, nsekhar, linux-arm-kernel, devicetree,
linux-kernel, balbi, linux-omap
* Vinod Koul <vinod.koul@intel.com> [151217 21:14]:
> On Thu, Dec 17, 2015 at 09:48:44AM -0800, Tony Lindgren wrote:
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [151217 05:33]:
> > > Hi,
> > >
> > > Changes since v1:
> > > - Updated to use the non 16bit arrays [1]
> > > - send the two patch as a series
> > >
> > > [1]
> > > As it has been discussed earlier:
> > > https://www.mail-archive.com/linux-omap@vger.kernel.org/msg122117.html
> > >
> > > the DT bindings has been changes compared to what we had in 4.4-rc1: the arrays
> > > now don't have the 16bit type.
> > > The changes are now merged to mainline and Vinod provided us a branch:
> > >
> > > git://git.infradead.org/users/vkoul/slave-dma.git fix/edma
> > >
> > > Which is based on 4.4-rc1 and only contains the two patch for changing the eDMA
> > > bindings.
> >
> > Great, I'll merge the fix/edma also into omap-for-v4.5/dt and apply
> > your two patches.
>
> FWIW, fix/edma is in Linu's tree now and should be in -rc6
Yes that's great, but now I can keep my branches at early -rc's
and that leaves out the need of late -rc backmerges to the
whole arm soc tree.
Regards,
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-12-18 13:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-17 13:33 [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 1/2] ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 Peter Ujfalusi
2015-12-17 13:33 ` [PATCH v02 2/2] ARM: DTS: am437x: " Peter Ujfalusi
2015-12-17 17:48 ` [PATCH v02 0/2] ARM: DTS: am33xx/am437x: Use the new eDMA bindings Tony Lindgren
2015-12-18 5:18 ` Vinod Koul
2015-12-18 13:46 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).