* [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers Finn Thain
` (77 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_scsi-fix-host-id --]
[-- Type: text/plain, Size: 1096 bytes --]
The NVRAM location of this byte is 16, as documented in
http://toshyp.atari.org/en/004009.html
This was confirmed by Michael Schmitz, by setting the SCSI host ID
under EmuTOS and then checking the value in /proc/driver/nvram and
/dev/nvram under Linux.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/atari_scsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:02:40.000000000 +1100
@@ -880,7 +880,7 @@ static int __init atari_scsi_probe(struc
} else {
/* Test if a host id is set in the NVRam */
if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
- unsigned char b = nvram_read_byte(14);
+ unsigned char b = nvram_read_byte(16);
/* Arbitration enabled? (for TOS)
* If yes, use configured host ID
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2016-01-03 5:05 ` [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
` (76 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-redundant-static-initializers --]
[-- Type: text/plain, Size: 4950 bytes --]
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 2 +-
drivers/scsi/dtc.c | 4 ++--
drivers/scsi/g_NCR5380.c | 4 ++--
drivers/scsi/pas16.c | 10 +++++-----
drivers/scsi/sun3_scsi.c | 8 ++++----
drivers/scsi/t128.c | 4 ++--
6 files changed, 16 insertions(+), 16 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:02:42.000000000 +1100
@@ -534,7 +534,7 @@ static void NCR5380_set_timer(struct NCR
}
-static int probe_irq __initdata = 0;
+static int probe_irq __initdata;
/**
* probe_intr - helper for IRQ autoprobe
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:02:42.000000000 +1100
@@ -150,7 +150,7 @@ static const struct signature {
static int __init dtc_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -188,7 +188,7 @@ __setup("dtc=", dtc_setup);
static int __init dtc_detect(struct scsi_host_template * tpnt)
{
- static int current_override = 0, current_base = 0;
+ static int current_override, current_base;
struct Scsi_Host *instance;
unsigned int addr;
void __iomem *base;
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:42.000000000 +1100
@@ -121,7 +121,7 @@ static struct override {
static void __init internal_setup(int board, char *str, int *ints)
{
- static int commandline_current = 0;
+ static int commandline_current;
switch (board) {
case BOARD_NCR5380:
if (ints[0] != 2 && ints[0] != 3) {
@@ -251,7 +251,7 @@ static int __init do_DTC3181E_setup(char
static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0;
+ static int current_override;
int count;
unsigned int *ports;
#ifndef SCSI_G_NCR5380_MEM
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:02:42.000000000 +1100
@@ -87,8 +87,8 @@
#include "NCR5380.h"
-static unsigned short pas16_addr = 0;
-static int pas16_irq = 0;
+static unsigned short pas16_addr;
+static int pas16_irq;
static const int scsi_irq_translate[] =
@@ -305,7 +305,7 @@ static int __init
static int __init pas16_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -344,8 +344,8 @@ __setup("pas16=", pas16_setup);
static int __init pas16_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0;
- static unsigned short current_base = 0;
+ static int current_override;
+ static unsigned short current_base;
struct Scsi_Host *instance;
unsigned short io_port;
int count;
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:02:42.000000000 +1100
@@ -100,10 +100,10 @@ static struct scsi_cmnd *sun3_dma_setup_
static unsigned char *sun3_scsi_regp;
static volatile struct sun3_dma_regs *dregs;
static struct sun3_udc_regs *udc_regs;
-static unsigned char *sun3_dma_orig_addr = NULL;
-static unsigned long sun3_dma_orig_count = 0;
-static int sun3_dma_active = 0;
-static unsigned long last_residual = 0;
+static unsigned char *sun3_dma_orig_addr;
+static unsigned long sun3_dma_orig_count;
+static int sun3_dma_active;
+static unsigned long last_residual;
static struct Scsi_Host *default_instance;
/*
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:02:42.000000000 +1100
@@ -126,7 +126,7 @@ static struct signature {
static int __init t128_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -165,7 +165,7 @@ __setup("t128=", t128_setup);
static int __init t128_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0, current_base = 0;
+ static int current_override, current_base;
struct Scsi_Host *instance;
unsigned long base;
void __iomem *p;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2016-01-03 5:05 ` [PATCH v4 01/78] atari_scsi: Fix SCSI host ID setting Finn Thain
2016-01-03 5:05 ` [PATCH v4 02/78] ncr5380: Remove redundant static variable initializers Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 04/78] ncr5380: Remove more pointless macros Finn Thain
` (75 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-TDEBUG-DTCDEBUG-PDEBUG --]
[-- Type: text/plain, Size: 10021 bytes --]
Replace {P,T,DTC}DEBUG_INIT with NDEBUG_INIT. Remove dead debugging
code, including code that's conditional upon *DEBUG_TRANSFER.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/dtc.c | 18 ++++++------------
drivers/scsi/dtc.h | 27 ---------------------------
drivers/scsi/pas16.c | 21 +++++++--------------
drivers/scsi/pas16.h | 16 ----------------
drivers/scsi/t128.c | 18 ++++++------------
drivers/scsi/t128.h | 16 ----------------
6 files changed, 19 insertions(+), 97 deletions(-)
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:02:47.000000000 +1100
@@ -205,9 +205,8 @@ static int __init dtc_detect(struct scsi
addr = 0;
} else
for (; !addr && (current_base < NO_BASES); ++current_base) {
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n",
+ (unsigned int)bases[current_base].address);
if (bases[current_base].noauto)
continue;
base = ioremap(bases[current_base].address, 0x2000);
@@ -216,18 +215,14 @@ static int __init dtc_detect(struct scsi
for (sig = 0; sig < NO_SIGNATURES; ++sig) {
if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) {
addr = bases[current_base].address;
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "dtc: detected board\n");
goto found;
}
}
iounmap(base);
}
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr);
if (!addr)
break;
@@ -271,9 +266,8 @@ found:
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
instance->irq = NO_IRQ;
#endif
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2016-01-03 16:02:47.000000000 +1100
@@ -10,10 +10,6 @@
#ifndef DTC3280_H
#define DTC3280_H
-#define DTCDEBUG 0
-#define DTCDEBUG_INIT 0x1
-#define DTCDEBUG_TRANSFER 0x2
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -33,31 +29,8 @@
#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
-#define dbNCR5380_read(reg) \
- (rval=readb(DTC_address(reg)), \
- (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\
- , (reg), DTC_address(reg), rval)), rval ) )
-
-#define dbNCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-
-
-#if !(DTCDEBUG & DTCDEBUG_TRANSFER)
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
-#else
-#define NCR5380_read(reg) (readb(DTC_address(reg)))
-#define xNCR5380_read(reg) \
- (((unsigned char) printk("DTC : read register %d at address %p\n"\
- , (reg), DTC_address(reg))), readb(DTC_address(reg)))
-
-#define NCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-#endif
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:02:47.000000000 +1100
@@ -1,6 +1,5 @@
#define PSEUDO_DMA
#define UNSAFE /* Not unsafe for PAS16 -- use it */
-#define PDEBUG 0
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
@@ -377,23 +376,18 @@ static int __init pas16_detect(struct sc
}
else
for (; !io_port && (current_base < NO_BASES); ++current_base) {
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n",
+ (unsigned int)bases[current_base].io_port);
if ( !bases[current_base].noauto &&
pas16_hw_detect( current_base ) ){
io_port = bases[current_base].io_port;
init_board( io_port, default_irqs[ current_base ], 0 );
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "pas16: detected board\n");
}
}
-
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n",
+ (unsigned int)io_port);
if (!io_port)
break;
@@ -431,9 +425,8 @@ static int __init pas16_detect(struct sc
outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 );
}
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-01-03 16:02:47.000000000 +1100
@@ -24,9 +24,6 @@
#ifndef PAS16_H
#define PAS16_H
-#define PDEBUG_INIT 0x1
-#define PDEBUG_TRANSFER 0x2
-
#define PAS16_DEFAULT_BASE_1 0x388
#define PAS16_DEFAULT_BASE_2 0x384
#define PAS16_DEFAULT_BASE_3 0x38c
@@ -120,21 +117,8 @@
#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] )
-#if !(PDEBUG & PDEBUG_TRANSFER)
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
- , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) )
-
-#define NCR5380_write(reg, value) \
- (printk("scsi%d : write %02x to register %d at io_port %04x\n", \
- instance->hostno, (value), (reg), PAS16_io_port(reg)), \
- outb( (value),PAS16_io_port(reg) ) )
-
-#endif
-
#define NCR5380_intr pas16_intr
#define do_NCR5380_intr do_pas16_intr
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:02:47.000000000 +1100
@@ -182,9 +182,8 @@ static int __init t128_detect(struct scs
base = 0;
} else
for (; !base && (current_base < NO_BASES); ++current_base) {
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n",
+ bases[current_base].address);
if (bases[current_base].noauto)
continue;
p = ioremap(bases[current_base].address, 0x2000);
@@ -195,17 +194,13 @@ static int __init t128_detect(struct scs
signatures[sig].string,
strlen(signatures[sig].string))) {
base = bases[current_base].address;
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "t128: detected board\n");
goto found;
}
iounmap(p);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : base = %08x\n", (unsigned int) base);
-#endif
+ dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base);
if (!base)
break;
@@ -242,9 +237,8 @@ found:
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-01-03 16:02:47.000000000 +1100
@@ -23,10 +23,6 @@
#ifndef T128_H
#define T128_H
-#define TDEBUG 0
-#define TDEBUG_INIT 0x1
-#define TDEBUG_TRANSFER 0x2
-
/*
* The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG).
@@ -92,20 +88,8 @@
#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
-#if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
- , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
-
-#define NCR5380_write(reg, value) { \
- printk("scsi%d : write %02x to register %d at address %08x\n", \
- instance->hostno, (value), (reg), T128_address(reg)); \
- writeb((value), (T128_address(reg))); \
-}
-#endif
#define NCR5380_intr t128_intr
#define do_NCR5380_intr do_t128_intr
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 04/78] ncr5380: Remove more pointless macros
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (2 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 03/78] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
` (74 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-pointless-macros --]
[-- Type: text/plain, Size: 6247 bytes --]
ASM macro is never defined. rtrc in pas16.c is not used.
NCR5380_map_config, do_NCR5380_intr, do_t128_intr and do_pas16_intr
are unused. NCR_NOT_SET harms readability. Remove them.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.h | 3 ---
drivers/scsi/g_NCR5380.c | 29 ++++++++++++++---------------
drivers/scsi/g_NCR5380.h | 5 -----
drivers/scsi/pas16.c | 16 ----------------
drivers/scsi/pas16.h | 5 -----
drivers/scsi/t128.h | 4 ----
6 files changed, 14 insertions(+), 48 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:02:54.000000000 +1100
@@ -244,8 +244,6 @@
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
-#ifndef ASM
-
#ifdef SUPPORT_TAGS
struct tag_alloc {
DECLARE_BITMAP(allocated, MAX_TAGS);
@@ -443,5 +441,4 @@ static __inline__ int NCR5380_pc_dma_res
#endif /* defined(i386) || defined(__alpha__) */
#endif /* defined(REAL_DMA) */
#endif /* __KERNEL__ */
-#endif /* ndef ASM */
#endif /* NCR5380_H */
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:54.000000000 +1100
@@ -82,14 +82,13 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
-#define NCR_NOT_SET 0
-static int ncr_irq = NCR_NOT_SET;
-static int ncr_dma = NCR_NOT_SET;
-static int ncr_addr = NCR_NOT_SET;
-static int ncr_5380 = NCR_NOT_SET;
-static int ncr_53c400 = NCR_NOT_SET;
-static int ncr_53c400a = NCR_NOT_SET;
-static int dtc_3181e = NCR_NOT_SET;
+static int ncr_irq;
+static int ncr_dma;
+static int ncr_addr;
+static int ncr_5380;
+static int ncr_53c400;
+static int ncr_53c400a;
+static int dtc_3181e;
static struct override {
NCR5380_map_type NCR5380_map_name;
@@ -271,19 +270,19 @@ static int __init generic_NCR5380_detect
void __iomem *iomem;
#endif
- if (ncr_irq != NCR_NOT_SET)
+ if (ncr_irq)
overrides[0].irq = ncr_irq;
- if (ncr_dma != NCR_NOT_SET)
+ if (ncr_dma)
overrides[0].dma = ncr_dma;
- if (ncr_addr != NCR_NOT_SET)
+ if (ncr_addr)
overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
- if (ncr_5380 != NCR_NOT_SET)
+ if (ncr_5380)
overrides[0].board = BOARD_NCR5380;
- else if (ncr_53c400 != NCR_NOT_SET)
+ else if (ncr_53c400)
overrides[0].board = BOARD_NCR53C400;
- else if (ncr_53c400a != NCR_NOT_SET)
+ else if (ncr_53c400a)
overrides[0].board = BOARD_NCR53C400A;
- else if (dtc_3181e != NCR_NOT_SET)
+ else if (dtc_3181e)
overrides[0].board = BOARD_DTC3181E;
#ifndef SCSI_G_NCR5380_MEM
if (!current_override && isapnp_present()) {
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:02:39.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:02:54.000000000 +1100
@@ -21,8 +21,6 @@
#define NCR5380_BIOSPARAM NULL
#endif
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -36,7 +34,6 @@
#ifndef SCSI_G_NCR5380_MEM
-#define NCR5380_map_config port
#define NCR5380_map_type int
#define NCR5380_map_name port
#define NCR5380_instance_name io_port
@@ -64,7 +61,6 @@
#else
/* therefore SCSI_G_NCR5380_MEM */
-#define NCR5380_map_config memory
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
#define NCR5380_instance_name base
@@ -103,6 +99,5 @@
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
-#endif /* ndef ASM */
#endif /* GENERIC_NCR5380_H */
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:02:54.000000000 +1100
@@ -145,22 +145,6 @@ static const unsigned short pas16_offse
* START_DMA_INITIATOR_RECEIVE_REG wo
*/
};
-/*----------------------------------------------------------------*/
-/* the following will set the monitor border color (useful to find
- where something crashed or gets stuck at */
-/* 1 = blue
- 2 = green
- 3 = cyan
- 4 = red
- 5 = magenta
- 6 = yellow
- 7 = white
-*/
-#if 1
-#define rtrc(i) {inb(0x3da); outb(0x31, 0x3c0); outb((i), 0x3c0);}
-#else
-#define rtrc(i) {}
-#endif
/*
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-01-03 16:02:54.000000000 +1100
@@ -95,9 +95,6 @@
#define OPERATION_MODE_1 0xec03
#define IO_CONFIG_3 0xf002
-
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -121,7 +118,6 @@
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
#define NCR5380_intr pas16_intr
-#define do_NCR5380_intr do_pas16_intr
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
@@ -134,5 +130,4 @@
#define PAS16_IRQS 0xd4a8
-#endif /* ndef ASM */
#endif /* PAS16_H */
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-01-03 16:02:54.000000000 +1100
@@ -67,8 +67,6 @@
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -92,7 +90,6 @@
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
#define NCR5380_intr t128_intr
-#define do_NCR5380_intr do_t128_intr
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
@@ -105,5 +102,4 @@
#define T128_IRQS 0xc4a8
-#endif /* ndef ASM */
#endif /* T128_H */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (3 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 04/78] ncr5380: Remove more pointless macros Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro Finn Thain
` (73 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-eliminate-local_declare-macros --]
[-- Type: text/plain, Size: 28664 bytes --]
The NCR5380_local_declare and NCR5380_setup macros exist to define and
initialize a particular local variable, to provide the address of the
chip registers needed for the driver's implementation of its
NCR5380_read/write register access macros.
In cumana_1 and macscsi, these macros generate pointless code like this,
struct Scsi_Host *_instance;
_instance = instance;
In pas16, the use of NCR5380_read/write in pas16_hw_detect() requires that
the io_port local variable has been defined and initialized, but the
NCR5380_local_declare and NCR5380_setup macros can't be used for that
purpose because the Scsi_Host struct has not yet been instantiated.
Moreover, these macros were removed from atari_NCR5380.c long ago and
now they constitute yet another discrepancy between the two core driver
forks.
Remove these "optimizations".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
Any performance penalty is highly unlikely given the algorithms involved
and the improvements made to compilers over the last two decades. (And
I'd probably accept some loss anyway given the maintainability benefit.)
Following the example of atari_NCR5380.c, the Scsi_Host pointer is now
always named "instance", and the NCR5380_read/write macros depend on this.
I think it is poor style to hard-code the identifier "instance" in these
macros but it is actually an improvement -- previously each NCR5380 driver
named a different local variable in its macro definitions.
Eventually, the NCR5380_read/write macros may have to become function
calls if this is to become a platform driver or a library. The instance
pointer or hostdata pointer will then have to be passed as an argument.
This patch is a step in that direction, in that it rewrites the
NCR5380_read/write macros in terms of hostdata and removes the
NCR5380_read/write usage from pas16_hw_detect() where there is no
Scsi_Host instance as yet.
---
drivers/scsi/NCR5380.c | 60 ++++++--------------------------------------
drivers/scsi/arm/cumana_1.c | 6 +---
drivers/scsi/arm/oak.c | 9 +++---
drivers/scsi/dmx3191d.c | 6 +---
drivers/scsi/dtc.c | 14 +++-------
drivers/scsi/dtc.h | 9 +-----
drivers/scsi/g_NCR5380.c | 27 ++++++++++---------
drivers/scsi/g_NCR5380.h | 30 ++++++++--------------
drivers/scsi/mac_scsi.c | 15 +----------
drivers/scsi/pas16.c | 16 +++++------
drivers/scsi/pas16.h | 11 +-------
drivers/scsi/t128.c | 26 +++++++++----------
drivers/scsi/t128.h | 9 +-----
13 files changed, 77 insertions(+), 161 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:02:56.000000000 +1100
@@ -230,11 +230,6 @@
* USLEEP_POLL - amount of time, in jiffies, to poll
*
* These macros MUST be defined :
- * NCR5380_local_declare() - declare any local variables needed for your
- * transfer routines.
- *
- * NCR5380_setup(instance) - initialize any local variables needed from a given
- * instance of the host adapter for NCR5380_{read,write,pread,pwrite}
*
* NCR5380_read(register) - read from the specified register
*
@@ -267,8 +262,8 @@
* possible) function may be used.
*/
-static int do_abort(struct Scsi_Host *host);
-static void do_reset(struct Scsi_Host *host);
+static int do_abort(struct Scsi_Host *);
+static void do_reset(struct Scsi_Host *);
/*
* initialize_SCp - init the scsi pointer field
@@ -313,12 +308,9 @@ static inline void initialize_SCp(struct
static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t)
{
- NCR5380_local_declare();
int n = 500; /* At about 8uS a cycle for the cpu access */
unsigned long end = jiffies + t;
int r;
-
- NCR5380_setup(instance);
while( n-- > 0)
{
@@ -406,9 +398,7 @@ mrs[] = {
static void NCR5380_print(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
unsigned char status, data, basr, mr, icr, i;
- NCR5380_setup(instance);
data = NCR5380_read(CURRENT_SCSI_DATA_REG);
status = NCR5380_read(STATUS_REG);
@@ -447,10 +437,8 @@ static void NCR5380_print(struct Scsi_Ho
static void NCR5380_print_phase(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
unsigned char status;
int i;
- NCR5380_setup(instance);
status = NCR5380_read(STATUS_REG);
if (!(status & SR_REQ))
@@ -566,11 +554,9 @@ static irqreturn_t __init probe_intr(int
static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
int possible)
{
- NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
unsigned long timeout;
int trying_irqs, i, mask;
- NCR5380_setup(instance);
for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
@@ -791,7 +777,6 @@ static void lprint_opcode(int opcode, st
static int NCR5380_init(struct Scsi_Host *instance, int flags)
{
- NCR5380_local_declare();
int i, pass;
unsigned long timeout;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
@@ -808,8 +793,6 @@ static int NCR5380_init(struct Scsi_Host
instance->NCR5380_instance_name += NCR53C400_address_adjust;
#endif
- NCR5380_setup(instance);
-
hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
@@ -1100,7 +1083,6 @@ static void NCR5380_main(struct work_str
static irqreturn_t NCR5380_intr(int dummy, void *dev_id)
{
- NCR5380_local_declare();
struct Scsi_Host *instance = dev_id;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
int done;
@@ -1114,7 +1096,6 @@ static irqreturn_t NCR5380_intr(int dumm
done = 1;
spin_lock_irqsave(instance->host_lock, flags);
/* Look for pending interrupts */
- NCR5380_setup(instance);
basr = NCR5380_read(BUS_AND_STATUS_REG);
/* XXX dispatch to appropriate routine if found and done=0 */
if (basr & BASR_IRQ) {
@@ -1205,7 +1186,6 @@ static irqreturn_t NCR5380_intr(int dumm
static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
- NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
unsigned char tmp[3], phase;
unsigned char *data;
@@ -1213,7 +1193,6 @@ static int NCR5380_select(struct Scsi_Ho
unsigned long timeout;
unsigned char value;
int err;
- NCR5380_setup(instance);
if (hostdata->selecting)
goto part2;
@@ -1487,7 +1466,6 @@ failed:
*/
static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
- NCR5380_local_declare();
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
@@ -1496,7 +1474,6 @@ static int NCR5380_transfer_pio(struct S
*/
int break_allowed = 0;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- NCR5380_setup(instance);
if (!(p & SR_IO))
dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c);
@@ -1623,10 +1600,8 @@ static int NCR5380_transfer_pio(struct S
* Locks: caller holds queue lock
*/
-static void do_reset(struct Scsi_Host *host) {
- NCR5380_local_declare();
- NCR5380_setup(host);
-
+static void do_reset(struct Scsi_Host *instance)
+{
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
udelay(25);
@@ -1645,13 +1620,11 @@ static void do_reset(struct Scsi_Host *h
* FIXME: sort this out and get new_eh running
*/
-static int do_abort(struct Scsi_Host *host) {
- NCR5380_local_declare();
+static int do_abort(struct Scsi_Host *instance)
+{
unsigned char *msgptr, phase, tmp;
int len;
int rc;
- NCR5380_setup(host);
-
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1666,7 +1639,7 @@ static int do_abort(struct Scsi_Host *ho
* the target sees, so we just handshake.
*/
- rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
if(rc < 0)
return -1;
@@ -1677,7 +1650,7 @@ static int do_abort(struct Scsi_Host *ho
if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, 0, 3*HZ);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
if(rc == -1)
return -1;
@@ -1686,7 +1659,7 @@ static int do_abort(struct Scsi_Host *ho
msgptr = &tmp;
len = 1;
phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(host, &phase, &len, &msgptr);
+ NCR5380_transfer_pio(instance, &phase, &len, &msgptr);
/*
* If we got here, and the command completed successfully,
@@ -1719,7 +1692,6 @@ static int do_abort(struct Scsi_Host *ho
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
- NCR5380_local_declare();
register int c = *count;
register unsigned char p = *phase;
register unsigned char *d = *data;
@@ -1732,8 +1704,6 @@ static int NCR5380_transfer_dma(struct S
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- NCR5380_setup(instance);
-
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
@@ -2000,7 +1970,6 @@ static int NCR5380_transfer_dma(struct S
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance) {
- NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)instance->hostdata;
unsigned char msgout = NOP;
int sink = 0;
@@ -2014,8 +1983,6 @@ static void NCR5380_information_transfer
/* RvC: we need to set the end of the polling time */
unsigned long poll_time = jiffies + USLEEP_POLL;
- NCR5380_setup(instance);
-
while (1) {
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
@@ -2406,7 +2373,6 @@ static void NCR5380_information_transfer
*/
static void NCR5380_reselect(struct Scsi_Host *instance) {
- NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)
instance->hostdata;
unsigned char target_mask;
@@ -2416,7 +2382,6 @@ static void NCR5380_reselect(struct Scsi
unsigned char *data;
struct scsi_cmnd *tmp = NULL, *prev;
int abort = 0;
- NCR5380_setup(instance);
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2525,10 +2490,8 @@ static void NCR5380_reselect(struct Scsi
#ifdef REAL_DMA
static void NCR5380_dma_complete(NCR5380_instance * instance) {
- NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
int transferred;
- NCR5380_setup(instance);
/*
* XXX this might not be right.
@@ -2581,7 +2544,6 @@ static void NCR5380_dma_complete(NCR5380
static int NCR5380_abort(struct scsi_cmnd *cmd)
{
- NCR5380_local_declare();
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
struct scsi_cmnd *tmp, **prev;
@@ -2590,8 +2552,6 @@ static int NCR5380_abort(struct scsi_cmn
NCR5380_print_status(instance);
- NCR5380_setup(instance);
-
dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
@@ -2737,8 +2697,6 @@ static int NCR5380_bus_reset(struct scsi
{
struct Scsi_Host *instance = cmd->device->host;
- NCR5380_local_declare();
- NCR5380_setup(instance);
NCR5380_print_status(instance);
spin_lock_irq(instance->host_lock);
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:02:38.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:02:56.000000000 +1100
@@ -20,10 +20,8 @@
#define PSEUDO_DMA
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare() struct Scsi_Host *_instance
-#define NCR5380_setup(instance) _instance = instance
-#define NCR5380_read(reg) cumanascsi_read(_instance, reg)
-#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
+#define NCR5380_read(reg) cumanascsi_read(instance, reg)
+#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
#define NCR5380_info cumanascsi_info
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:02:38.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:02:56.000000000 +1100
@@ -20,11 +20,12 @@
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare() void __iomem *_base
-#define NCR5380_setup(host) _base = priv(host)->base
-#define NCR5380_read(reg) readb(_base + ((reg) << 2))
-#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
+#define NCR5380_read(reg) \
+ readb(priv(instance)->base + ((reg) << 2))
+#define NCR5380_write(reg, value) \
+ writeb(value, priv(instance)->base + ((reg) << 2))
+
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
#define NCR5380_show_info oakscsi_show_info
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:02:38.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:02:56.000000000 +1100
@@ -36,12 +36,10 @@
#define DONT_USE_INTR
-#define NCR5380_read(reg) inb(port + reg)
-#define NCR5380_write(reg, value) outb(value, port + reg)
+#define NCR5380_read(reg) inb(instance->io_port + reg)
+#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
#define NCR5380_implementation_fields /* none */
-#define NCR5380_local_declare() unsigned int port
-#define NCR5380_setup(instance) port = instance->io_port
/*
* Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:02:56.000000000 +1100
@@ -325,8 +325,6 @@ static inline int NCR5380_pread(struct S
unsigned char *d = dst;
int i; /* For counting time spent in the poll-loop */
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- NCR5380_local_declare();
- NCR5380_setup(instance);
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
@@ -342,7 +340,7 @@ static inline int NCR5380_pread(struct S
while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
++i;
rtrc(3);
- memcpy_fromio(d, base + DTC_DATA_BUF, 128);
+ memcpy_fromio(d, hostdata->base + DTC_DATA_BUF, 128);
d += 128;
len -= 128;
rtrc(7);
@@ -377,8 +375,6 @@ static inline int NCR5380_pwrite(struct
{
int i;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- NCR5380_local_declare();
- NCR5380_setup(instance);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
@@ -394,7 +390,7 @@ static inline int NCR5380_pwrite(struct
while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
++i;
rtrc(3);
- memcpy_toio(base + DTC_DATA_BUF, src, 128);
+ memcpy_toio(hostdata->base + DTC_DATA_BUF, src, 128);
src += 128;
len -= 128;
}
@@ -420,15 +416,15 @@ MODULE_LICENSE("GPL");
static int dtc_release(struct Scsi_Host *shost)
{
- NCR5380_local_declare();
- NCR5380_setup(shost);
+ struct NCR5380_hostdata *hostdata = shost_priv(shost);
+
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
- iounmap(base);
+ iounmap(hostdata->base);
return 0;
}
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2016-01-03 16:02:56.000000000 +1100
@@ -21,13 +21,8 @@
#define NCR5380_implementation_fields \
void __iomem *base
-#define NCR5380_local_declare() \
- void __iomem *base
-
-#define NCR5380_setup(instance) \
- base = ((struct NCR5380_hostdata *)(instance)->hostdata)->base
-
-#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
+#define DTC_address(reg) \
+ (((struct NCR5380_hostdata *)shost_priv(instance))->base + DTC_5380_OFFSET + reg)
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:56.000000000 +1100
@@ -459,9 +459,6 @@ static int __init generic_NCR5380_detect
static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
@@ -520,13 +517,13 @@ generic_NCR5380_biosparam(struct scsi_de
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
+#ifdef SCSI_G_NCR5380_MEM
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+#endif
int blocks = len / 128;
int start = 0;
int bl;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
while (1) {
@@ -547,7 +544,8 @@ static inline int NCR5380_pread(struct S
}
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+ memcpy_fromio(dst + start,
+ hostdata->iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
blocks--;
@@ -567,7 +565,8 @@ static inline int NCR5380_pread(struct S
}
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+ memcpy_fromio(dst + start,
+ hostdata->iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
blocks--;
@@ -604,14 +603,14 @@ static inline int NCR5380_pread(struct S
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
+#ifdef SCSI_G_NCR5380_MEM
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+#endif
int blocks = len / 128;
int start = 0;
int bl;
int i;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
while (1) {
@@ -632,7 +631,8 @@ static inline int NCR5380_pwrite(struct
}
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+ src + start, 128);
#endif
start += 128;
blocks--;
@@ -648,7 +648,8 @@ static inline int NCR5380_pwrite(struct
}
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+ src + start, 128);
#endif
start += 128;
blocks--;
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:02:56.000000000 +1100
@@ -46,17 +46,12 @@
#define NCR5380_region_size 8
#endif
-#define NCR5380_read(reg) (inb(NCR5380_map_name + (reg)))
-#define NCR5380_write(reg, value) (outb((value), (NCR5380_map_name + (reg))))
+#define NCR5380_read(reg) \
+ inb(instance->io_port + (reg))
+#define NCR5380_write(reg, value) \
+ outb(value, instance->io_port + (reg))
-#define NCR5380_implementation_fields \
- NCR5380_map_type NCR5380_map_name
-
-#define NCR5380_local_declare() \
- register NCR5380_implementation_fields
-
-#define NCR5380_setup(instance) \
- NCR5380_map_name = (NCR5380_map_type)((instance)->NCR5380_instance_name)
+#define NCR5380_implementation_fields /* none */
#else
/* therefore SCSI_G_NCR5380_MEM */
@@ -70,19 +65,16 @@
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
-#define NCR5380_read(reg) readb(iomem + NCR53C400_mem_base + (reg))
-#define NCR5380_write(reg, value) writeb(value, iomem + NCR53C400_mem_base + (reg))
+#define NCR5380_read(reg) \
+ readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+ NCR53C400_mem_base + (reg))
+#define NCR5380_write(reg, value) \
+ writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+ NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
- NCR5380_map_type NCR5380_map_name; \
void __iomem *iomem;
-#define NCR5380_local_declare() \
- register void __iomem *iomem
-
-#define NCR5380_setup(instance) \
- iomem = (((struct NCR5380_hostdata *)(instance)->hostdata)->iomem)
-
#endif
#define NCR5380_intr generic_NCR5380_intr
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:02:38.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:02:56.000000000 +1100
@@ -32,11 +32,9 @@
#define PSEUDO_DMA
#define NCR5380_implementation_fields unsigned char *pdma_base
-#define NCR5380_local_declare() struct Scsi_Host *_instance
-#define NCR5380_setup(instance) _instance = instance
-#define NCR5380_read(reg) macscsi_read(_instance, reg)
-#define NCR5380_write(reg, value) macscsi_write(_instance, reg, value)
+#define NCR5380_read(reg) macscsi_read(instance, reg)
+#define NCR5380_write(reg, value) macscsi_write(instance, reg, value)
#define NCR5380_pread macscsi_pread
#define NCR5380_pwrite macscsi_pwrite
@@ -129,9 +127,6 @@ static void mac_scsi_reset_boot(struct S
{
unsigned long end;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
/*
* Do a SCSI reset to clean up the bus during initialization. No messing
* with the queues, interrupts, or locks necessary here.
@@ -235,9 +230,6 @@ static int macscsi_pread(struct Scsi_Hos
unsigned char *d;
unsigned char *s;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
d = dst;
@@ -329,9 +321,6 @@ static int macscsi_pwrite(struct Scsi_Ho
unsigned char *s;
unsigned char *d;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
s = src;
d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-01-03 16:02:56.000000000 +1100
@@ -103,16 +103,9 @@
#define CAN_QUEUE 32
#endif
-#define NCR5380_implementation_fields \
- volatile unsigned short io_port
+#define NCR5380_implementation_fields /* none */
-#define NCR5380_local_declare() \
- volatile unsigned short io_port
-
-#define NCR5380_setup(instance) \
- io_port = (instance)->io_port
-
-#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] )
+#define PAS16_io_port(reg) (instance->io_port + pas16_offset[(reg)])
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:02:47.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:02:56.000000000 +1100
@@ -248,15 +248,15 @@ found:
static int t128_release(struct Scsi_Host *shost)
{
- NCR5380_local_declare();
- NCR5380_setup(shost);
+ struct NCR5380_hostdata *hostdata = shost_priv(shost);
+
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
- iounmap(base);
+ iounmap(hostdata->base);
return 0;
}
@@ -302,14 +302,14 @@ static int t128_biosparam(struct scsi_de
* timeout.
*/
-static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
- int len) {
- NCR5380_local_declare();
- void __iomem *reg;
+static inline int
+NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ void __iomem *reg, *base = hostdata->base;
unsigned char *d = dst;
register int i = len;
- NCR5380_setup(instance);
reg = base + T_DATA_REG_OFFSET;
#if 0
@@ -348,14 +348,14 @@ static inline int NCR5380_pread (struct
* timeout.
*/
-static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src,
- int len) {
- NCR5380_local_declare();
- void __iomem *reg;
+static inline int
+NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ void __iomem *reg, *base = hostdata->base;
unsigned char *s = src;
register int i = len;
- NCR5380_setup(instance);
reg = base + T_DATA_REG_OFFSET;
#if 0
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-01-03 16:02:56.000000000 +1100
@@ -78,13 +78,8 @@
#define NCR5380_implementation_fields \
void __iomem *base
-#define NCR5380_local_declare() \
- void __iomem *base
-
-#define NCR5380_setup(instance) \
- base = ((struct NCR5380_hostdata *)(instance->hostdata))->base
-
-#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
+#define T128_address(reg) \
+ (((struct NCR5380_hostdata *)shost_priv(instance))->base + T_5380_OFFSET + ((reg) * 0x20))
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:02:56.000000000 +1100
@@ -188,7 +188,7 @@ static void __init
outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */
outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
+ inb(io_port + pas16_offset[RESET_PARITY_INTERRUPT_REG]);
/* Set the SCSI interrupt pointer without mucking up the sound
* interrupt pointer in the same byte.
@@ -263,13 +263,13 @@ static int __init
* put in an additional test to try to weed them out.
*/
- outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */
- NCR5380_write( MODE_REG, 0x20 ); /* Is it really SCSI? */
- if( NCR5380_read( MODE_REG ) != 0x20 ) /* Write to a reg. */
- return 0; /* and try to read */
- NCR5380_write( MODE_REG, 0x00 ); /* it back. */
- if( NCR5380_read( MODE_REG ) != 0x00 )
- return 0;
+ outb(0x01, io_port + WAIT_STATE); /* 1 Wait state */
+ outb(0x20, io_port + pas16_offset[MODE_REG]); /* Is it really SCSI? */
+ if (inb(io_port + pas16_offset[MODE_REG]) != 0x20) /* Write to a reg. */
+ return 0; /* and try to read */
+ outb(0x00, io_port + pas16_offset[MODE_REG]); /* it back. */
+ if (inb(io_port + pas16_offset[MODE_REG]) != 0x00)
+ return 0;
return 1;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (4 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 05/78] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions Finn Thain
` (72 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-NCR5380_instance_name --]
[-- Type: text/plain, Size: 2739 bytes --]
This macro makes the code cryptic. Remove it.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 2 +-
drivers/scsi/g_NCR5380.c | 7 ++++---
drivers/scsi/g_NCR5380.h | 2 --
3 files changed, 5 insertions(+), 6 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:02.000000000 +1100
@@ -412,10 +412,11 @@ static int __init generic_NCR5380_detect
continue;
}
- instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
#ifndef SCSI_G_NCR5380_MEM
+ instance->io_port = overrides[current_override].NCR5380_map_name;
instance->n_io_port = region_size;
#else
+ instance->base = overrides[current_override].NCR5380_map_name;
((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
#endif
@@ -464,10 +465,10 @@ static int generic_NCR5380_release_resou
NCR5380_exit(instance);
#ifndef SCSI_G_NCR5380_MEM
- release_region(instance->NCR5380_instance_name, instance->n_io_port);
+ release_region(instance->io_port, instance->n_io_port);
#else
iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
- release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
+ release_mem_region(instance->base, NCR5380_region_size);
#endif
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:02.000000000 +1100
@@ -36,7 +36,6 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
-#define NCR5380_instance_name io_port
#define NCR53C400_register_offset 0
#define NCR53C400_address_adjust 8
@@ -58,7 +57,6 @@
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
-#define NCR5380_instance_name base
#define NCR53C400_register_offset 0x108
#define NCR53C400_address_adjust 0
#define NCR53C400_mem_base 0x3880
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:02.000000000 +1100
@@ -790,7 +790,7 @@ static int NCR5380_init(struct Scsi_Host
#ifdef NCR53C400
if (flags & FLAG_NCR53C400)
- instance->NCR5380_instance_name += NCR53C400_address_adjust;
+ instance->io_port += NCR53C400_address_adjust;
#endif
hostdata->aborted = 0;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (5 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 06/78] ncr5380: Remove NCR5380_instance_name macro Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code Finn Thain
` (71 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-bus-wedge --]
[-- Type: text/plain, Size: 7505 bytes --]
This patch splits the NCR5380_init() function into two parts, similar
to the scheme used with atari_NCR5380.c. This avoids two problems.
Firstly, NCR5380_init() may perform a bus reset, which would cause the
chip to assert IRQ. The chip is unable to mask its bus reset interrupt.
Drivers can't call request_irq() before calling NCR5380_init(), because
initialization must happen before the interrupt handler executes. If
driver initialization causes an interrupt it may be problematic on some
platforms. To avoid that, first move the bus reset code into
NCR5380_maybe_reset_bus().
Secondly, NCR5380_init() contains some board-specific interrupt setup code
for the NCR53C400 that does not belong in the core driver. In moving this
code, better not re-order interrupt initialization and bus reset. Again,
the solution is to move the bus reset code into NCR5380_maybe_reset_bus().
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 34 ++++++++++++++++++++--------------
drivers/scsi/NCR5380.h | 1 +
drivers/scsi/arm/cumana_1.c | 2 ++
drivers/scsi/arm/oak.c | 2 ++
drivers/scsi/dmx3191d.c | 2 ++
drivers/scsi/dtc.c | 2 ++
drivers/scsi/g_NCR5380.c | 2 ++
drivers/scsi/pas16.c | 2 ++
drivers/scsi/t128.c | 2 ++
9 files changed, 35 insertions(+), 14 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:02.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:03.000000000 +1100
@@ -777,8 +777,7 @@ static void lprint_opcode(int opcode, st
static int NCR5380_init(struct Scsi_Host *instance, int flags)
{
- int i, pass;
- unsigned long timeout;
+ int i;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
if(in_interrupt())
@@ -831,18 +830,26 @@ static int NCR5380_init(struct Scsi_Host
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
}
#endif
+ return 0;
+}
- /*
- * Detect and correct bus wedge problems.
- *
- * If the system crashed, it may have crashed in a state
- * where a SCSI command was still executing, and the
- * SCSI bus is not in a BUS FREE STATE.
- *
- * If this is the case, we'll try to abort the currently
- * established nexus which we know nothing about, and that
- * failing, do a hard reset of the SCSI bus
- */
+/**
+ * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
+ * @instance: adapter to check
+ *
+ * If the system crashed, it may have crashed with a connected target and
+ * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
+ * currently established nexus, which we know nothing about. Failing that
+ * do a bus reset.
+ *
+ * Note that a bus reset will cause the chip to assert IRQ.
+ *
+ * Returns 0 if successful, otherwise -ENXIO.
+ */
+
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
+{
+ int pass;
for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
switch (pass) {
@@ -850,7 +857,6 @@ static int NCR5380_init(struct Scsi_Host
case 3:
case 5:
printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no);
- timeout = jiffies + 5 * HZ;
NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ);
break;
case 2:
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:02:54.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:03.000000000 +1100
@@ -318,6 +318,7 @@ static void NCR5380_print(struct Scsi_Ho
static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
#endif
static int NCR5380_init(struct Scsi_Host *instance, int flags);
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);
static void NCR5380_information_transfer(struct Scsi_Host *instance);
#ifndef DONT_USE_INTR
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:03.000000000 +1100
@@ -240,6 +240,8 @@ static int cumanascsi1_probe(struct expa
NCR5380_init(host, 0);
+ NCR5380_maybe_reset_bus(host);
+
priv(host)->ctrl = 0;
writeb(0, priv(host)->base + CTRL);
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:03:03.000000000 +1100
@@ -145,6 +145,8 @@ static int oakscsi_probe(struct expansio
NCR5380_init(host, 0);
+ NCR5380_maybe_reset_bus(host);
+
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:03:03.000000000 +1100
@@ -97,6 +97,8 @@ static int dmx3191d_probe_one(struct pci
NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ NCR5380_maybe_reset_bus(shost);
+
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:03.000000000 +1100
@@ -237,6 +237,8 @@ found:
NCR5380_init(instance, 0);
+ NCR5380_maybe_reset_bus(instance);
+
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR); /* Enable int's */
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:02.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:03.000000000 +1100
@@ -422,6 +422,8 @@ static int __init generic_NCR5380_detect
NCR5380_init(instance, flags);
+ NCR5380_maybe_reset_bus(instance);
+
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
else
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:03:03.000000000 +1100
@@ -384,6 +384,8 @@ static int __init pas16_detect(struct sc
NCR5380_init(instance, 0);
+ NCR5380_maybe_reset_bus(instance);
+
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
else
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:03:03.000000000 +1100
@@ -215,6 +215,8 @@ found:
NCR5380_init(instance, 0);
+ NCR5380_maybe_reset_bus(instance);
+
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
else
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (6 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 07/78] ncr5380: Split NCR5380_init() into two functions Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
` (70 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-NCR53C400-macro --]
[-- Type: text/plain, Size: 5275 bytes --]
Move board-specific code like this,
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
from the core driver to the board driver. Eliminate the NCR53C400 macro
from the core driver. Removal of all macros like this one will be
necessary in order to have one core driver that can support all kinds of
boards.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
Changed since v1:
- Don't set FLAG_NO_PSEUDO_DMA when !defined(PSEUDO_DMA). It's pointless.
---
drivers/scsi/NCR5380.c | 18 ------------------
drivers/scsi/g_NCR5380.c | 21 ++++++++++++++++-----
drivers/scsi/g_NCR5380.h | 6 ++----
3 files changed, 18 insertions(+), 27 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:06.000000000 +1100
@@ -654,9 +654,6 @@ static void prepare_info(struct Scsi_Hos
#ifdef UNSAFE
"UNSAFE "
#endif
-#ifdef NCR53C400
- "NCR53C400 "
-#endif
"");
}
@@ -782,15 +779,6 @@ static int NCR5380_init(struct Scsi_Host
if(in_interrupt())
printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
- /*
- * On NCR53C400 boards, NCR5380 registers are mapped 8 past
- * the base address.
- */
-
-#ifdef NCR53C400
- if (flags & FLAG_NCR53C400)
- instance->io_port += NCR53C400_address_adjust;
-#endif
hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
@@ -824,12 +812,6 @@ static int NCR5380_init(struct Scsi_Host
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
-
-#ifdef NCR53C400
- if (hostdata->flags & FLAG_NCR53C400) {
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
- }
-#endif
return 0;
}
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:06.000000000 +1100
@@ -64,9 +64,7 @@
#define AUTOPROBE_IRQ
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define NCR53C400_PSEUDO_DMA 1
#define PSEUDO_DMA
-#define NCR53C400
#endif
#include <asm/io.h>
@@ -263,7 +261,7 @@ static int __init generic_NCR5380_detect
static unsigned int __initdata dtc_3181e_ports[] = {
0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
};
- int flags = 0;
+ int flags;
struct Scsi_Host *instance;
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
@@ -324,12 +322,15 @@ static int __init generic_NCR5380_detect
continue;
ports = NULL;
+ flags = 0;
switch (overrides[current_override].board) {
case BOARD_NCR5380:
flags = FLAG_NO_PSEUDO_DMA;
break;
case BOARD_NCR53C400:
+#ifdef PSEUDO_DMA
flags = FLAG_NCR53C400;
+#endif
break;
case BOARD_NCR53C400A:
flags = FLAG_NO_PSEUDO_DMA;
@@ -415,6 +416,13 @@ static int __init generic_NCR5380_detect
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
instance->n_io_port = region_size;
+
+ /*
+ * On NCR53C400 boards, NCR5380 registers are mapped 8 past
+ * the base address.
+ */
+ if (overrides[current_override].board == BOARD_NCR53C400)
+ instance->io_port += 8;
#else
instance->base = overrides[current_override].NCR5380_map_name;
((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
@@ -422,6 +430,9 @@ static int __init generic_NCR5380_detect
NCR5380_init(instance, flags);
+ if (overrides[current_override].board == BOARD_NCR53C400)
+ NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
+
NCR5380_maybe_reset_bus(instance);
if (overrides[current_override].irq != IRQ_AUTO)
@@ -506,7 +517,7 @@ generic_NCR5380_biosparam(struct scsi_de
}
#endif
-#ifdef NCR53C400_PSEUDO_DMA
+#ifdef PSEUDO_DMA
/**
* NCR5380_pread - pseudo DMA read
@@ -690,7 +701,7 @@ static inline int NCR5380_pwrite(struct
; // TIMEOUT
return 0;
}
-#endif /* PSEUDO_DMA */
+#endif /* PSEUDO_DMA */
/*
* Include the NCR5380 core code that we build our driver around
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:02.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:06.000000000 +1100
@@ -14,7 +14,7 @@
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#else
@@ -37,9 +37,8 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
#define NCR53C400_register_offset 0
-#define NCR53C400_address_adjust 8
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
#else
#define NCR5380_region_size 8
@@ -58,7 +57,6 @@
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
#define NCR53C400_register_offset 0x108
-#define NCR53C400_address_adjust 0
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (7 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 08/78] ncr5380: Move NCR53C400-specific code Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
` (69 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-merge-do_reset --]
[-- Type: text/plain, Size: 7145 bytes --]
Merge the bus reset code from NCR5380.c into atari_NCR5380.c. This allows
for removal of a lot of duplicated code conditional on the RESET_BOOT
macro (in the next patch).
The atari_NCR5380.c fork lacks the do_reset() and NCR5380_poll_politely()
routines from NCR5380.c, so introduce them. They are indispensible. Keep
the two implementations in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 33 +++++++-----
drivers/scsi/atari_NCR5380.c | 113 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 134 insertions(+), 12 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:06.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:08.000000000 +1100
@@ -838,19 +838,20 @@ static int NCR5380_maybe_reset_bus(struc
case 1:
case 3:
case 5:
- printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no);
- NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ);
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
break;
case 2:
- printk(KERN_WARNING "scsi%d: bus busy, attempting abort\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
do_abort(instance);
break;
case 4:
- printk(KERN_WARNING "scsi%d: bus busy, attempting reset\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
do_reset(instance);
break;
case 6:
- printk(KERN_ERR "scsi%d: bus locked solid or invalid override\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
return -ENXIO;
}
}
@@ -1579,21 +1580,29 @@ static int NCR5380_transfer_pio(struct S
}
/**
- * do_reset - issue a reset command
- * @host: adapter to reset
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
*
- * Issue a reset sequence to the NCR5380 and try and get the bus
- * back into sane shape.
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
*
- * Locks: caller holds queue lock
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
*/
static void do_reset(struct Scsi_Host *instance)
{
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(25);
+ udelay(50);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
}
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:02:37.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:08.000000000 +1100
@@ -234,6 +234,9 @@
#define HOSTNO instance->host_no
#define H_NO(cmd) (cmd)->device->host->host_no
+static int do_abort(struct Scsi_Host *);
+static void do_reset(struct Scsi_Host *);
+
#ifdef SUPPORT_TAGS
/*
@@ -475,6 +478,47 @@ static inline void initialize_SCp(struct
}
}
+/**
+ * NCR5380_poll_politely - wait for NCR5380 status bits
+ * @instance: controller to poll
+ * @reg: 5380 register to poll
+ * @bit: Bitmask to check
+ * @val: Value required to exit
+ *
+ * Polls the NCR5380 in a reasonably efficient manner waiting for
+ * an event to occur, after a short quick poll we begin giving the
+ * CPU back in non IRQ contexts
+ *
+ * Returns the value of the register or a negative error code.
+ */
+
+static int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int t)
+{
+ int n = 500;
+ unsigned long end = jiffies + t;
+ int r;
+
+ while (n-- > 0) {
+ r = NCR5380_read(reg);
+ if ((r & bit) == val)
+ return 0;
+ cpu_relax();
+ }
+
+ /* t time yet ? */
+ while (time_before(jiffies, end)) {
+ r = NCR5380_read(reg);
+ if ((r & bit) == val)
+ return 0;
+ if (!in_interrupt())
+ cond_resched();
+ else
+ cpu_relax();
+ }
+ return -ETIMEDOUT;
+}
+
#include <linux/delay.h>
#if NDEBUG
@@ -801,6 +845,49 @@ static int __init NCR5380_init(struct Sc
}
/**
+ * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
+ * @instance: adapter to check
+ *
+ * If the system crashed, it may have crashed with a connected target and
+ * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
+ * currently established nexus, which we know nothing about. Failing that
+ * do a bus reset.
+ *
+ * Note that a bus reset will cause the chip to assert IRQ.
+ *
+ * Returns 0 if successful, otherwise -ENXIO.
+ */
+
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
+{
+ int pass;
+
+ for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
+ switch (pass) {
+ case 1:
+ case 3:
+ case 5:
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
+ break;
+ case 2:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
+ do_abort(instance);
+ break;
+ case 4:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
+ do_reset(instance);
+ break;
+ case 6:
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
+ return -ENXIO;
+ }
+ }
+ return 0;
+}
+
+/**
* NCR5380_exit - remove an NCR5380
* @instance: adapter to remove
*
@@ -1741,6 +1828,32 @@ static int NCR5380_transfer_pio(struct S
return -1;
}
+/**
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
+ *
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
+ *
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
+ */
+
+static void do_reset(struct Scsi_Host *instance)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
+ udelay(50);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
+}
+
/*
* Function : do_abort (Scsi_Host *host)
*
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (8 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 09/78] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 11/78] ncr5380: Simplify bus reset handlers Finn Thain
` (68 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-remove-RESET_BOOT --]
[-- Type: text/plain, Size: 16783 bytes --]
The atari_NCR5380.c core driver now takes care of bus reset upon driver
initialization if required (same as NCR5380.c). Move the Toshiba CD-ROM
support into the core driver, enabled with a host flag, so that all
NCR5380 drivers can make use of it.
Drop the RESET_BOOT macros and the ATARI_SCSI_RESET_BOOT and
ATARI_SCSI_TOSHIBA_DELAY Kconfig symbols, which are now redundant.
Remove the atari_scsi_reset_boot(), mac_scsi_reset_boot() and
sun3_scsi_reset_boot() routines. None of this duplicated code is needed
now that all drivers can use NCR5380_maybe_reset_bus().
This brings atari_scsi, mac_scsi and sun3_scsi into line with all of the
other NCR5380 drivers.
The bus reset may raise an interrupt. That would be new behaviour for
atari_scsi only when CONFIG_ATARI_SCSI_RESET_BOOT=n. The ST DMA interrupt
is not assigned to atari_scsi at this stage, so
CONFIG_ATARI_SCSI_RESET_BOOT=y may well be problematic already.
Regardless, do_reset() now raises and clears the interrupt within
local_irq_save/restore which should avoid problems.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changed since v1:
- Fixed minor inconsistency in mac5380= usage message.
---
drivers/scsi/Kconfig | 17 -----------
drivers/scsi/NCR5380.c | 17 +++++++++--
drivers/scsi/NCR5380.h | 1
drivers/scsi/atari_NCR5380.c | 22 +++++++++-----
drivers/scsi/atari_scsi.c | 60 +++++----------------------------------
drivers/scsi/mac_scsi.c | 65 ++++++-------------------------------------
drivers/scsi/sun3_scsi.c | 47 -------------------------------
7 files changed, 51 insertions(+), 178 deletions(-)
Index: linux/drivers/scsi/Kconfig
===================================================================
--- linux.orig/drivers/scsi/Kconfig 2016-01-03 16:02:37.000000000 +1100
+++ linux/drivers/scsi/Kconfig 2016-01-03 16:03:09.000000000 +1100
@@ -1618,23 +1618,6 @@ config ATARI_SCSI
ST-DMA, replacing ACSI). It does NOT support other schemes, like
in the Hades (without DMA).
-config ATARI_SCSI_TOSHIBA_DELAY
- bool "Long delays for Toshiba CD-ROMs"
- depends on ATARI_SCSI
- help
- This option increases the delay after a SCSI arbitration to
- accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
- use a Toshiba CD-ROM drive; otherwise, the option is not needed and
- would impact performance a bit, so say N.
-
-config ATARI_SCSI_RESET_BOOT
- bool "Reset SCSI-devices at boottime"
- depends on ATARI_SCSI
- help
- Reset the devices on your Atari whenever it boots. This makes the
- boot process fractionally longer but may assist recovery from errors
- that leave the devices with SCSI operations partway completed.
-
config MAC_SCSI
tristate "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:08.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:09.000000000 +1100
@@ -674,13 +674,14 @@ static void prepare_info(struct Scsi_Hos
"base 0x%lx, irq %d, "
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
- "flags { %s}, "
+ "flags { %s%s}, "
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "",
+ hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#ifdef DIFFERENTIAL
"DIFFERENTIAL "
#endif
@@ -860,6 +861,7 @@ static int __init NCR5380_init(struct Sc
static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int pass;
for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
@@ -878,6 +880,14 @@ static int NCR5380_maybe_reset_bus(struc
case 4:
shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
do_reset(instance);
+ /* Wait after a reset; the SCSI standard calls for
+ * 250ms, we wait 500ms to be on the safe side.
+ * But some Toshiba CD-ROMs need ten times that.
+ */
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ msleep(2500);
+ else
+ msleep(500);
break;
case 6:
shost_printk(KERN_ERR, instance, "bus locked solid\n");
@@ -1493,12 +1503,10 @@ static int NCR5380_select(struct Scsi_Ho
* a minimum so we'll udelay ceil(1.2)
*/
-#ifdef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
- /* ++roman: But some targets (see above :-) seem to need a bit more... */
- udelay(15);
-#else
- udelay(2);
-#endif
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ udelay(15);
+ else
+ udelay(2);
if (hostdata->connected) {
NCR5380_write(MODE_REG, MR_BASE);
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:02:40.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:03:09.000000000 +1100
@@ -164,15 +164,6 @@ static inline unsigned long SCSI_DMA_GET
#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
(atari_scsi_host->hostdata))->dma_len)
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#ifndef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (HZ/2)
-#else
-#define AFTER_RESET_DELAY (5*HZ/2)
-#endif
-
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
@@ -208,12 +199,12 @@ static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
-#ifdef SUPPORT_TAGS
static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
-#endif
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
#if defined(REAL_DMA)
@@ -488,7 +479,7 @@ static int __init atari_scsi_setup(char
* Defaults depend on TT or Falcon, determined at run time.
* Negative values mean don't change.
*/
- int ints[6];
+ int ints[8];
get_options(str, ARRAY_SIZE(ints), ints);
@@ -504,10 +495,11 @@ static int __init atari_scsi_setup(char
setup_sg_tablesize = ints[3];
if (ints[0] >= 4)
setup_hostid = ints[4];
-#ifdef SUPPORT_TAGS
if (ints[0] >= 5)
setup_use_tagged_queuing = ints[5];
-#endif
+ /* ints[6] (use_pdma) is ignored */
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
@@ -516,38 +508,6 @@ __setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void __init atari_scsi_reset_boot(void)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk("Atari SCSI: resetting the SCSI bus...");
-
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
-
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay(50);
- /* reset RST and interrupt */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
- end = jiffies + AFTER_RESET_DELAY;
- while (time_before(jiffies, end))
- barrier();
-
- printk(" done\n");
-}
-#endif
-
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
@@ -917,17 +877,13 @@ static int __init atari_scsi_probe(struc
}
atari_scsi_host = instance;
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
- atari_scsi_reset_boot();
-#endif
-
instance->irq = irq->start;
host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
NCR5380_init(instance, host_flags);
@@ -975,6 +931,8 @@ static int __init atari_scsi_probe(struc
#endif
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:03:09.000000000 +1100
@@ -49,8 +49,6 @@
#include "NCR5380.h"
-#define RESET_BOOT
-
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
@@ -63,17 +61,8 @@ static int setup_use_tagged_queuing = -1
module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#define TOSHIBA_DELAY
-
-#ifdef TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (5*HZ/2)
-#else
-#define AFTER_RESET_DELAY (HZ/2)
-#endif
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
/*
* NCR 5380 register access functions
@@ -92,12 +81,12 @@ static inline void macscsi_write(struct
#ifndef MODULE
static int __init mac_scsi_setup(char *str)
{
- int ints[7];
+ int ints[8];
(void)get_options(str, ARRAY_SIZE(ints), ints);
- if (ints[0] < 1 || ints[0] > 6) {
- pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n");
+ if (ints[0] < 1) {
+ pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n");
return 0;
}
if (ints[0] >= 1)
@@ -112,47 +101,14 @@ static int __init mac_scsi_setup(char *s
setup_use_tagged_queuing = ints[5];
if (ints[0] >= 6)
setup_use_pdma = ints[6];
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-#ifdef RESET_BOOT
-/*
- * Our 'bus reset on boot' function
- */
-
-static void mac_scsi_reset_boot(struct Scsi_Host *instance)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
-
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
- /* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
- barrier();
-
- printk(KERN_INFO " done\n" );
-}
-#endif
-
#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
@@ -421,13 +377,10 @@ static int __init mac_scsi_probe(struct
} else
host_flags |= FLAG_NO_PSEUDO_DMA;
-#ifdef RESET_BOOT
- mac_scsi_reset_boot(instance);
-#endif
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
NCR5380_init(instance, host_flags);
@@ -438,6 +391,8 @@ static int __init mac_scsi_probe(struct
goto fail_irq;
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:02:42.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:03:09.000000000 +1100
@@ -86,10 +86,6 @@ module_param(setup_use_tagged_queuing, i
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-/* #define RESET_BOOT */
-
-#define AFTER_RESET_DELAY (HZ/2)
-
/* ms to wait after hitting dma regs */
#define SUN3_DMA_DELAY 10
@@ -144,45 +140,6 @@ static inline void sun3_udc_write(unsign
}
#endif
-#ifdef RESET_BOOT
-static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No
- * messing with the queues, interrupts, or locks necessary here.
- */
-
- printk( "Sun3 SCSI: resetting the SCSI bus..." );
-
- /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
-// sun3_disable_irq( IRQ_SUN3_SCSI );
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
-
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
-
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
-
- /* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
- barrier();
-
- /* switch on SCSI IRQ again */
-// sun3_enable_irq( IRQ_SUN3_SCSI );
-
- printk( " done\n" );
-}
-#endif
-
// safe bits for the CSR
#define CSR_GOOD 0x060f
@@ -631,9 +588,7 @@ static int __init sun3_scsi_probe(struct
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
#endif
-#ifdef RESET_BOOT
- sun3_scsi_reset_boot(instance);
-#endif
+ NCR5380_maybe_reset_bus(instance);
error = scsi_add_host(instance, NULL);
if (error)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:09.000000000 +1100
@@ -243,6 +243,7 @@
#define FLAG_DTC3181E 16 /* DTC3181E */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
+#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
#ifdef SUPPORT_TAGS
struct tag_alloc {
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:08.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:09.000000000 +1100
@@ -618,7 +618,7 @@ static void prepare_info(struct Scsi_Hos
"base 0x%lx, irq %d, "
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
- "flags { %s%s%s}, "
+ "flags { %s%s%s%s}, "
#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
"USLEEP_POLL %lu, USLEEP_WAITLONG %lu, "
#endif
@@ -630,6 +630,7 @@ static void prepare_info(struct Scsi_Hos
hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "",
hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
+ hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
USLEEP_POLL, USLEEP_WAITLONG,
#endif
@@ -831,6 +832,7 @@ static int NCR5380_init(struct Scsi_Host
static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int pass;
for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
@@ -849,6 +851,14 @@ static int NCR5380_maybe_reset_bus(struc
case 4:
shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
do_reset(instance);
+ /* Wait after a reset; the SCSI standard calls for
+ * 250ms, we wait 500ms to be on the safe side.
+ * But some Toshiba CD-ROMs need ten times that.
+ */
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ msleep(2500);
+ else
+ msleep(500);
break;
case 6:
shost_printk(KERN_ERR, instance, "bus locked solid\n");
@@ -1253,7 +1263,10 @@ static int NCR5380_select(struct Scsi_Ho
* a minimum so we'll udelay ceil(1.2)
*/
- udelay(2);
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ udelay(15);
+ else
+ udelay(2);
dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 11/78] ncr5380: Simplify bus reset handlers
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (9 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 10/78] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag Finn Thain
` (67 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-cleanup-bus-reset-handler --]
[-- Type: text/plain, Size: 4220 bytes --]
Make use of do_reset() in the bus reset handler in atari_NCR5380.c. The
version in NCR5380.c already does so. Keep them in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Bus reset handlers in both core drivers still have serious problems for
EH purposes. Those problems are addressed later in this series.
---
drivers/scsi/NCR5380.c | 20 +++++++++++---------
drivers/scsi/atari_NCR5380.c | 30 ++++++++++++------------------
2 files changed, 23 insertions(+), 27 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:12.000000000 +1100
@@ -668,7 +668,7 @@ static void prepare_info(struct Scsi_Hos
* Locks: called functions disable irqs
*/
-static void NCR5380_print_status(struct Scsi_Host *instance)
+static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
{
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2693,24 +2693,26 @@ static int NCR5380_abort(struct scsi_cmn
}
-/*
- * Function : int NCR5380_bus_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
- * Locks: host lock taken by caller
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
+ spin_lock_irq(instance->host_lock);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
NCR5380_print_status(instance);
+#endif
- spin_lock_irq(instance->host_lock);
do_reset(instance);
+
spin_unlock_irq(instance->host_lock);
return SUCCESS;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:12.000000000 +1100
@@ -719,7 +719,7 @@ static void lprint_Scsi_Cmnd(struct scsi
printk("\n");
}
-static void NCR5380_print_status(struct Scsi_Host *instance)
+static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
struct scsi_cmnd *ptr;
@@ -2982,13 +2982,11 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
}
-/*
- * Function : int NCR5380_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS or FAILURE
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
@@ -2998,22 +2996,19 @@ static int NCR5380_bus_reset(struct scsi
int i;
unsigned long flags;
+ local_irq_save(flags);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
NCR5380_print_status(instance);
+#endif
+
+ do_reset(instance);
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(40);
/* reset NCR registers */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
- /* ++roman: reset interrupt condition! otherwise no interrupts don't get
- * through anymore ... */
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
/* After the reset, there are no more connected or disconnected commands
* and no busy units; so clear the low-level status here to avoid
@@ -3028,7 +3023,6 @@ static int NCR5380_bus_reset(struct scsi
if (hostdata->disconnected_queue)
dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
- local_irq_save(flags);
hostdata->issue_queue = NULL;
hostdata->connected = NULL;
hostdata->disconnected_queue = NULL;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (10 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 11/78] ncr5380: Simplify bus reset handlers Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 13/78] ncr5380: Remove redundant register writes Finn Thain
` (66 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-unused-aborted-flag --]
[-- Type: text/plain, Size: 2656 bytes --]
The aborted flag was introduced in v1.1.38 but never used. Remove it.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 2 --
drivers/scsi/NCR5380.h | 1 -
drivers/scsi/atari_NCR5380.c | 2 --
3 files changed, 5 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:12.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:13.000000000 +1100
@@ -781,7 +781,6 @@ static int NCR5380_init(struct Scsi_Host
if(in_interrupt())
printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
- hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
if (i > hostdata->id_mask)
@@ -2574,7 +2573,6 @@ static int NCR5380_abort(struct scsi_cmn
if (hostdata->connected == cmd) {
dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no);
- hostdata->aborted = 1;
/*
* We should perform BSY checking, and make sure we haven't slipped
* into BUS FREE.
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:12.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:13.000000000 +1100
@@ -813,7 +813,6 @@ static int __init NCR5380_init(struct Sc
SETUP_HOSTDATA(instance);
hostdata->host = instance;
- hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
hostdata->id_higher_mask = 0;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
@@ -2834,7 +2833,6 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
*/
if (do_abort(instance) == 0) {
- hostdata->aborted = 1;
hostdata->connected = NULL;
cmd->result = DID_ABORT << 16;
#ifdef SUPPORT_TAGS
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:13.000000000 +1100
@@ -271,7 +271,6 @@ struct NCR5380_hostdata {
volatile int restart_select; /* we have disconnected,
used to restart
NCR5380_select() */
- volatile unsigned aborted:1; /* flag, says aborted */
int flags;
unsigned long time_expires; /* in jiffies, set prior to sleeping */
int select_time; /* timer in select for target response */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 13/78] ncr5380: Remove redundant register writes
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (11 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 12/78] ncr5380: Remove unused hostdata->aborted flag Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
` (65 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-double-register-writes --]
[-- Type: text/plain, Size: 2314 bytes --]
Remove the duplicate write to the Select Enable Register that appeared
in v1.1.38.
Also remove the redundant write to Initiator Command Register prior to
calling do_abort().
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 2 --
drivers/scsi/atari_NCR5380.c | 3 ---
2 files changed, 5 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:13.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:14.000000000 +1100
@@ -1384,7 +1384,6 @@ part2:
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return 0;
}
hostdata->targets_present |= (1 << scmd_id(cmd));
@@ -2076,7 +2075,6 @@ static void NCR5380_information_transfer
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:13.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:14.000000000 +1100
@@ -1640,7 +1640,6 @@ static int NCR5380_select(struct Scsi_Ho
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return 0;
}
@@ -2192,8 +2191,6 @@ static void NCR5380_information_transfer
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select()
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (12 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 13/78] ncr5380: Remove redundant register writes Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 15/78] ncr5380: Always escalate bad target time-out " Finn Thain
` (64 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-use-return-instead-of-goto --]
[-- Type: text/plain, Size: 4840 bytes --]
The "failed" label in NCR5380_select() is not helpful. Some failures
return 0, others -1. Use return instead of goto to improve clarity and
brevity, like atari_NCR5380.c does. Fix the relevant comments.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 30 ++++++++----------------------
drivers/scsi/atari_NCR5380.c | 6 +++---
2 files changed, 11 insertions(+), 25 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:14.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:15.000000000 +1100
@@ -997,16 +997,6 @@ static void NCR5380_main(struct work_str
*/
dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun);
- /*
- * A successful selection is defined as one that
- * leaves us with the command connected and
- * in hostdata->connected, OR has terminated the
- * command.
- *
- * With successful commands, we fall through
- * and see if we can do an information transfer,
- * with failures we will restart.
- */
hostdata->selecting = NULL;
/* RvC: have to preset this to indicate a new command is being performed */
@@ -1162,9 +1152,10 @@ static irqreturn_t NCR5380_intr(int dumm
* Inputs : instance - instantiation of the 5380 driver on which this
* target lives, cmd - SCSI command to execute.
*
- * Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
+ * Returns : -1 if selection failed but should be retried.
+ * 0 if selection failed and should not be retried.
+ * 0 if selection succeeded completely (hostdata->connected == cmd).
+ * 0 if selection in progress (hostdata->selecting == cmd).
*
* Side effects :
* If bus busy, arbitration failed, etc, NCR5380_select() will exit
@@ -1224,7 +1215,7 @@ static int NCR5380_select(struct Scsi_Ho
printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- goto failed;
+ return -1;
}
dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no);
@@ -1242,7 +1233,7 @@ static int NCR5380_select(struct Scsi_Ho
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
- goto failed;
+ return -1;
}
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL);
@@ -1255,7 +1246,7 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no);
- goto failed;
+ return -1;
}
/*
* Again, bus clear + bus settle time is 1.2us, however, this is
@@ -1412,7 +1403,7 @@ part2:
if(err) {
printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- goto failed;
+ return -1;
}
dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
@@ -1433,11 +1424,6 @@ part2:
initialize_SCp(cmd);
return 0;
-
- /* Selection failed */
-failed:
- return -1;
-
}
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:14.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:15.000000000 +1100
@@ -1382,9 +1382,9 @@ static irqreturn_t NCR5380_intr(int irq,
* Inputs : instance - instantiation of the 5380 driver on which this
* target lives, cmd - SCSI command to execute.
*
- * Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
+ * Returns : -1 if selection failed but should be retried.
+ * 0 if selection failed and should not be retried.
+ * 0 if selection succeeded completely (hostdata->connected == cmd).
*
* Side effects :
* If bus busy, arbitration failed, etc, NCR5380_select() will exit
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 15/78] ncr5380: Always escalate bad target time-out in NCR5380_select()
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (13 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 14/78] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
` (63 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-escalate-selection-timeout --]
[-- Type: text/plain, Size: 5895 bytes --]
Remove the restart_select and targets_present variables introduced in
Linux v1.1.38. The former was used only for a questionable debug printk
and the latter "so we can call a select failure a retryable condition".
Well, retrying select failure in general is a different problem to a
target that doesn't assert BSY. We need to handle these two cases
differently; the latter case can be left to the SCSI ML.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 13 -------------
drivers/scsi/NCR5380.h | 6 ------
drivers/scsi/atari_NCR5380.c | 13 -------------
3 files changed, 32 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:15.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:17.000000000 +1100
@@ -790,7 +790,6 @@ static int NCR5380_init(struct Scsi_Host
#ifdef REAL_DMA
hostdata->dmalen = 0;
#endif
- hostdata->targets_present = 0;
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -1186,8 +1185,6 @@ static int NCR5380_select(struct Scsi_Ho
if (hostdata->selecting)
goto part2;
- hostdata->restart_select = 0;
-
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
@@ -1363,21 +1360,12 @@ part2:
if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << scmd_id(cmd))) {
- printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no);
- if (hostdata->restart_select)
- printk(KERN_DEBUG "\trestart select\n");
- NCR5380_dprint(NDEBUG_SELECTION, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
cmd->result = DID_BAD_TARGET << 16;
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
return 0;
}
- hostdata->targets_present |= (1 << scmd_id(cmd));
/*
* Since we followed the SCSI spec, and raised ATN while SEL
@@ -2382,7 +2370,6 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:15.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:17.000000000 +1100
@@ -826,7 +826,6 @@ static int __init NCR5380_init(struct Sc
#if defined (REAL_DMA)
hostdata->dma_len = 0;
#endif
- hostdata->targets_present = 0;
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -1409,7 +1408,6 @@ static int NCR5380_select(struct Scsi_Ho
unsigned long timeout;
unsigned long flags;
- hostdata->restart_select = 0;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
instance->this_id);
@@ -1625,14 +1623,6 @@ static int NCR5380_select(struct Scsi_Ho
if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << cmd->device->id)) {
- printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
- if (hostdata->restart_select)
- printk(KERN_NOTICE "\trestart select\n");
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
cmd->result = DID_BAD_TARGET << 16;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
@@ -1643,8 +1633,6 @@ static int NCR5380_select(struct Scsi_Ho
return 0;
}
- hostdata->targets_present |= (1 << cmd->device->id);
-
/*
* Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
@@ -2605,7 +2593,6 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:13.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:17.000000000 +1100
@@ -257,9 +257,6 @@ struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
- unsigned char targets_present; /* targets we have connected
- to, so we can call a select
- failure a retryable condition */
volatile unsigned char busy[8]; /* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
volatile int dma_len; /* requested length of DMA */
@@ -268,9 +265,6 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *connected; /* currently connected command */
volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
- volatile int restart_select; /* we have disconnected,
- used to restart
- NCR5380_select() */
int flags;
unsigned long time_expires; /* in jiffies, set prior to sleeping */
int select_time; /* timer in select for target response */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (14 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 15/78] ncr5380: Always escalate bad target time-out " Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
` (62 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-drop-completed-command --]
[-- Type: text/plain, Size: 3540 bytes --]
If a target disappears from the SCSI bus, NCR5380_select() may
subsequently fail with a time-out. In this situation, scsi_done is
called and NCR5380_select() returns 0. Both hostdata->connected and
hostdata->selecting are NULL and the main loop should proceed with
the next command in the issue queue. Clarify this logic.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Good code style would be,
if (this) {
/* do stuff */
}
rather than,
if (!this) {
} else {
/* do stuff */
}
But I've used the latter form at this point in the series for a cleaner
diff between NCR5380.c and atari_NC5380.c, making it easier to gradually
reduce discrepancies. Code style gets fixed up along the way.
---
drivers/scsi/NCR5380.c | 8 ++++++--
drivers/scsi/atari_NCR5380.c | 8 ++++----
2 files changed, 10 insertions(+), 6 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:17.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:18.000000000 +1100
@@ -1007,14 +1007,18 @@ static void NCR5380_main(struct work_str
*/
if (!NCR5380_select(instance, tmp)) {
- break;
+ /* OK or bad target */
} else {
+ /* Need to retry */
LIST(tmp, hostdata->issue_queue);
tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = tmp;
done = 0;
dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no);
}
+ if (hostdata->connected ||
+ hostdata->selecting)
+ break;
/* lock held here still */
} /* if target/lun is not busy */
} /* for */
@@ -1024,7 +1028,7 @@ static void NCR5380_main(struct work_str
tmp = (struct scsi_cmnd *) hostdata->selecting;
/* Selection will drop and retake the lock */
if (!NCR5380_select(instance, tmp)) {
- /* Ok ?? */
+ /* OK or bad target */
} else {
/* RvC: device failed, so we wait a long time
this is needed for Mustek scanners, that
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:17.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:18.000000000 +1100
@@ -1139,13 +1139,13 @@ static void NCR5380_main(struct work_str
cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
#endif
if (!NCR5380_select(instance, tmp)) {
+ /* OK or bad target */
local_irq_disable();
hostdata->retain_dma_intr--;
- /* release if target did not response! */
maybe_release_dma_irq(instance);
local_irq_restore(flags);
- break;
} else {
+ /* Need to retry */
local_irq_disable();
LIST(tmp, hostdata->issue_queue);
SET_NEXT(tmp, hostdata->issue_queue);
@@ -1157,9 +1157,9 @@ static void NCR5380_main(struct work_str
local_irq_restore(flags);
dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
"returned to issue_queue\n", HOSTNO);
- if (hostdata->connected)
- break;
}
+ if (hostdata->connected)
+ break;
} /* if target/lun/target queue is not busy */
} /* for issue_queue */
} /* if (!hostdata->connected) */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (15 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 16/78] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
` (61 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-assert-BSY-during-selection --]
[-- Type: text/plain, Size: 2441 bytes --]
NCR5380.c is not compliant with the SCSI-2 standard (at least, not with
the draft revision 10L that I have to refer to). The selection algorithm
in atari_NCR5380.c is correct, so use that.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
The NCR 5380 Family datasheet has a flow chart to support this. Please see
http://pdf.datasheetarchive.com/indexerfiles/Scans-001/Scans-0031883.pdf
This is another old bug fix that was unfortunately never applied to the
original NCR5380.c core driver.
---
drivers/scsi/NCR5380.c | 8 +++++++-
drivers/scsi/atari_NCR5380.c | 7 ++++---
2 files changed, 11 insertions(+), 4 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:18.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:19.000000000 +1100
@@ -1236,7 +1236,13 @@ static int NCR5380_select(struct Scsi_Ho
dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
return -1;
}
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL);
+
+ /* After/during arbitration, BSY should be asserted.
+ * IBM DPES-31080 Version S31Q works now
+ * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman)
+ */
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
if (!(hostdata->flags & FLAG_DTC3181E) &&
/* RvC: DTC3181E has some trouble with this
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:18.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:19.000000000 +1100
@@ -1480,9 +1480,10 @@ static int NCR5380_select(struct Scsi_Ho
return -1;
}
- /* after/during arbitration, BSY should be asserted.
- IBM DPES-31080 Version S31Q works now */
- /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */
+ /* After/during arbitration, BSY should be asserted.
+ * IBM DPES-31080 Version S31Q works now
+ * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman)
+ */
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (16 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 17/78] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 19/78] ncr5380: Cleanup bogus {request,release}_region() calls Finn Thain
` (60 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-eliminate-USLEEP_WAITLONG --]
[-- Type: text/plain, Size: 4652 bytes --]
Linux 2.1.105 introduced the USLEEP_WAITLONG delay, apparently "needed for
Mustek scanners". It is intended to stall the issue queue for 5 seconds.
There are a number of problems with this.
1. Only g_NCR5380 enables the delay, which implies that the other five
drivers using the NCR5380.c core driver remain incompatible with
Mustek scanners.
2. The delay is not implemented by atari_NCR5380.c, which is problematic
for re-unifying the two core driver forks.
3. The delay is implemented using NCR5380_set_timer() which makes it
unreliable. A new command queued by the mid-layer cancels the delay.
4. The delay is applied indiscriminately in several situations in which
NCR5380_select() returns -1. These are-- reselection by the target,
failure of the target to assert BSY, and failure of the target to
assert REQ. It's clear from the comments that USLEEP_WAITLONG is not
relevant to the reselection case. And reportedly, these scanners do
not disconnect.
5. atari_NCR5380.c was forked before Linux 2.1.105, so it was spared some
of the damage done to NCR5380.c. In this case, the atari_NCR5380.c core
driver was more standard-compliant and may not have needed any
workaround like the USLEEP_WAITLONG kludge. The compliance issue was
addressed in the previous patch.
If these scanners still don't work, we need a better solution. Retrying
selection until EH aborts a command offers equivalent robustness. Bugs in
the existing driver prevent EH working correctly but this is addressed in
a subsequent patch. Remove USLEEP_WAITLONG.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 19 +++++--------------
drivers/scsi/g_NCR5380.c | 1 -
2 files changed, 5 insertions(+), 15 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:19.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:20.000000000 +1100
@@ -468,10 +468,6 @@ static void NCR5380_print_phase(struct S
#ifndef USLEEP_POLL
#define USLEEP_POLL msecs_to_jiffies(200)
#endif
-#ifndef USLEEP_WAITLONG
-/* RvC: (reasonable time to wait on select error) */
-#define USLEEP_WAITLONG USLEEP_SLEEP
-#endif
/*
* Function : int should_disconnect (unsigned char cmd)
@@ -619,8 +615,8 @@ static void prepare_info(struct Scsi_Hos
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
"flags { %s%s%s%s}, "
-#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
- "USLEEP_POLL %lu, USLEEP_WAITLONG %lu, "
+#if defined(USLEEP_POLL) && defined(USLEEP_SLEEP)
+ "USLEEP_POLL %lu, USLEEP_SLEEP %lu, "
#endif
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
@@ -631,8 +627,8 @@ static void prepare_info(struct Scsi_Hos
hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
-#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
- USLEEP_POLL, USLEEP_WAITLONG,
+#if defined(USLEEP_POLL) && defined(USLEEP_SLEEP)
+ USLEEP_POLL, USLEEP_SLEEP,
#endif
#ifdef AUTOPROBE_IRQ
"AUTOPROBE_IRQ "
@@ -1030,15 +1026,10 @@ static void NCR5380_main(struct work_str
if (!NCR5380_select(instance, tmp)) {
/* OK or bad target */
} else {
- /* RvC: device failed, so we wait a long time
- this is needed for Mustek scanners, that
- do not respond to commands immediately
- after a scan */
- printk(KERN_DEBUG "scsi%d: device %d did not respond in time\n", instance->host_no, tmp->device->id);
LIST(tmp, hostdata->issue_queue);
tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = tmp;
- NCR5380_set_timer(hostdata, USLEEP_WAITLONG);
+ done = 0;
}
} /* if hostdata->selecting */
if (hostdata->connected
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:06.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:20.000000000 +1100
@@ -59,7 +59,6 @@
/* settings for DTC3181E card with only Mustek scanner attached */
#define USLEEP_POLL msecs_to_jiffies(10)
#define USLEEP_SLEEP msecs_to_jiffies(200)
-#define USLEEP_WAITLONG msecs_to_jiffies(5000)
#define AUTOPROBE_IRQ
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 19/78] ncr5380: Cleanup bogus {request,release}_region() calls
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (17 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 18/78] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 20/78] ncr5380: Introduce unbound workqueue Finn Thain
` (59 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-cleanup-request_region-release_region --]
[-- Type: text/plain, Size: 2877 bytes --]
Commit 8b801ead3d7a ("[ARM] rpc: update Acorn SCSI drivers to modern ecard
interfaces") neglected to remove a request_region() call in cumana_1.c.
Commit eda32612f7b2 ("[PATCH] give all LLDD driver a ->release method") in
history/history.git added some pointless release_region() calls in dtc.c,
pas16.c and t128.c.
Fix these issues.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/arm/cumana_1.c | 6 ------
drivers/scsi/dtc.c | 2 --
drivers/scsi/pas16.c | 2 --
drivers/scsi/t128.c | 2 --
4 files changed, 12 deletions(-)
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:22.000000000 +1100
@@ -245,12 +245,6 @@ static int cumanascsi1_probe(struct expa
priv(host)->ctrl = 0;
writeb(0, priv(host)->base + CTRL);
- host->n_io_port = 255;
- if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
- ret = -EBUSY;
- goto out_unmap;
- }
-
ret = request_irq(host->irq, cumanascsi_intr, 0,
"CumanaSCSI-1", host);
if (ret) {
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:22.000000000 +1100
@@ -423,8 +423,6 @@ static int dtc_release(struct Scsi_Host
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
iounmap(hostdata->base);
return 0;
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:03:22.000000000 +1100
@@ -540,8 +540,6 @@ static int pas16_release(struct Scsi_Hos
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:03:22.000000000 +1100
@@ -255,8 +255,6 @@ static int t128_release(struct Scsi_Host
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
iounmap(hostdata->base);
return 0;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 20/78] ncr5380: Introduce unbound workqueue
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (18 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 19/78] ncr5380: Cleanup bogus {request,release}_region() calls Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 21/78] ncr5380: Sleep when polling, if possible Finn Thain
` (58 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-new-workqueue --]
[-- Type: text/plain, Size: 14974 bytes --]
Allocate a work queue that will permit busy waiting and sleeping. This
means NCR5380_init() can potentially fail, so add this error path.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
In subsequent patches, the work function adopts this work queue so it
can sleep while polling, which allows the removal of some flawed and
complicated code in NCR5380_select() in NCR5380.c.
Changed since v1:
- Dropped WQ_CPU_INTENSIVE flag because Documentation/workqueue.txt says it
"is meaningless for unbound wq".
---
drivers/scsi/NCR5380.c | 15 +++++++++++----
drivers/scsi/NCR5380.h | 1 +
drivers/scsi/arm/cumana_1.c | 8 ++++++--
drivers/scsi/arm/oak.c | 8 ++++++--
drivers/scsi/atari_NCR5380.c | 8 +++++++-
drivers/scsi/atari_scsi.c | 5 ++++-
drivers/scsi/dmx3191d.c | 17 +++++++++++------
drivers/scsi/dtc.c | 11 +++++++++--
drivers/scsi/g_NCR5380.c | 31 +++++++++++++++----------------
drivers/scsi/mac_scsi.c | 5 ++++-
drivers/scsi/pas16.c | 10 ++++++++--
drivers/scsi/sun3_scsi.c | 5 ++++-
drivers/scsi/t128.c | 13 ++++++++++---
13 files changed, 96 insertions(+), 41 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:20.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:23.000000000 +1100
@@ -514,7 +514,7 @@ static int should_disconnect(unsigned ch
static void NCR5380_set_timer(struct NCR5380_hostdata *hostdata, unsigned long timeout)
{
hostdata->time_expires = jiffies + timeout;
- schedule_delayed_work(&hostdata->coroutine, timeout);
+ queue_delayed_work(hostdata->work_q, &hostdata->coroutine, timeout);
}
@@ -791,7 +791,12 @@ static int NCR5380_init(struct Scsi_Host
hostdata->disconnected_queue = NULL;
INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main);
-
+ hostdata->work_q = alloc_workqueue("ncr5380_%d",
+ WQ_UNBOUND | WQ_MEM_RECLAIM,
+ 1, instance->host_no);
+ if (!hostdata->work_q)
+ return -ENOMEM;
+
/* The CHECK code seems to break the 53C400. Will check it later maybe */
if (flags & FLAG_NCR53C400)
hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;
@@ -872,6 +877,7 @@ static void NCR5380_exit(struct Scsi_Hos
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
cancel_delayed_work_sync(&hostdata->coroutine);
+ destroy_workqueue(hostdata->work_q);
}
/**
@@ -932,7 +938,7 @@ static int NCR5380_queue_command_lck(str
/* Run the coroutine if it isn't already running. */
/* Kick off command processing */
- schedule_delayed_work(&hostdata->coroutine, 0);
+ queue_delayed_work(hostdata->work_q, &hostdata->coroutine, 0);
return 0;
}
@@ -1128,7 +1134,8 @@ static irqreturn_t NCR5380_intr(int dumm
} /* if BASR_IRQ */
spin_unlock_irqrestore(instance->host_lock, flags);
if(!done)
- schedule_delayed_work(&hostdata->coroutine, 0);
+ queue_delayed_work(hostdata->work_q,
+ &hostdata->coroutine, 0);
} while (!done);
return IRQ_HANDLED;
}
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:17.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:23.000000000 +1100
@@ -284,6 +284,7 @@ struct NCR5380_hostdata {
unsigned spin_max_r;
unsigned spin_max_w;
#endif
+ struct workqueue_struct *work_q;
};
#ifdef __KERNEL__
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:22.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:23.000000000 +1100
@@ -238,7 +238,9 @@ static int cumanascsi1_probe(struct expa
host->irq = ec->irq;
- NCR5380_init(host, 0);
+ ret = NCR5380_init(host, 0);
+ if (ret)
+ goto out_unmap;
NCR5380_maybe_reset_bus(host);
@@ -250,7 +252,7 @@ static int cumanascsi1_probe(struct expa
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, host->irq, ret);
- goto out_unmap;
+ goto out_exit;
}
ret = scsi_add_host(host, &ec->dev);
@@ -262,6 +264,8 @@ static int cumanascsi1_probe(struct expa
out_free_irq:
free_irq(host->irq, host);
+ out_exit:
+ NCR5380_exit(host);
out_unmap:
iounmap(priv(host)->base);
iounmap(priv(host)->dma);
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:03:23.000000000 +1100
@@ -143,17 +143,21 @@ static int oakscsi_probe(struct expansio
host->irq = NO_IRQ;
host->n_io_port = 255;
- NCR5380_init(host, 0);
+ ret = NCR5380_init(host, 0);
+ if (ret)
+ goto out_unmap;
NCR5380_maybe_reset_bus(host);
ret = scsi_add_host(host, &ec->dev);
if (ret)
- goto out_unmap;
+ goto out_exit;
scsi_scan_host(host);
goto out;
+ out_exit:
+ NCR5380_exit(host);
out_unmap:
iounmap(priv(host)->base);
unreg:
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:19.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:23.000000000 +1100
@@ -643,7 +643,7 @@ static inline void queue_main(struct NCR
queue it on the 'immediate' task queue, to be processed
immediately after the current interrupt processing has
finished. */
- schedule_work(&hostdata->main_task);
+ queue_work(hostdata->work_q, &hostdata->main_task);
}
/* else: nothing to do: the running NCR5380_main() will pick up
any newly queued command. */
@@ -832,6 +832,11 @@ static int __init NCR5380_init(struct Sc
hostdata->flags = flags;
INIT_WORK(&hostdata->main_task, NCR5380_main);
+ hostdata->work_q = alloc_workqueue("ncr5380_%d",
+ WQ_UNBOUND | WQ_MEM_RECLAIM,
+ 1, instance->host_no);
+ if (!hostdata->work_q)
+ return -ENOMEM;
prepare_info(instance);
@@ -907,6 +912,7 @@ static void NCR5380_exit(struct Scsi_Hos
struct NCR5380_hostdata *hostdata = shost_priv(instance);
cancel_work_sync(&hostdata->main_task);
+ destroy_workqueue(hostdata->work_q);
}
/**
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:03:23.000000000 +1100
@@ -885,7 +885,9 @@ static int __init atari_scsi_probe(struc
#endif
host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
if (IS_A_TT()) {
error = request_irq(instance->irq, scsi_tt_intr, 0,
@@ -947,6 +949,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
fail_alloc:
if (atari_dma_buffer)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:03:03.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:03:23.000000000 +1100
@@ -95,7 +95,9 @@ static int dmx3191d_probe_one(struct pci
*/
shost->irq = NO_IRQ;
- NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ if (error)
+ goto out_host_put;
NCR5380_maybe_reset_bus(shost);
@@ -103,11 +105,15 @@ static int dmx3191d_probe_one(struct pci
error = scsi_add_host(shost, &pdev->dev);
if (error)
- goto out_release_region;
+ goto out_exit;
scsi_scan_host(shost);
return 0;
+out_exit:
+ NCR5380_exit(shost);
+out_host_put:
+ scsi_host_put(shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
@@ -119,15 +125,14 @@ static int dmx3191d_probe_one(struct pci
static void dmx3191d_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ unsigned long io = shost->io_port;
scsi_remove_host(shost);
NCR5380_exit(shost);
-
- release_region(shost->io_port, DMX3191D_REGION_LEN);
- pci_disable_device(pdev);
-
scsi_host_put(shost);
+ release_region(io, DMX3191D_REGION_LEN);
+ pci_disable_device(pdev);
}
static struct pci_device_id dmx3191d_pci_tbl[] = {
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:22.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:23.000000000 +1100
@@ -230,12 +230,13 @@ static int __init dtc_detect(struct scsi
found:
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL)
- break;
+ goto out_unmap;
instance->base = addr;
((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, 0))
+ goto out_unregister;
NCR5380_maybe_reset_bus(instance);
@@ -275,6 +276,12 @@ found:
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_unmap:
+ iounmap(base);
+ return count;
}
/*
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:20.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:23.000000000 +1100
@@ -239,9 +239,6 @@ static int __init do_DTC3181E_setup(char
* and DTC436(ISAPnP) controllers. If overrides have been set we use
* them.
*
- * The caller supplied NCR5380_init function is invoked from here, before
- * the interrupt line is taken.
- *
* Locks: none
*/
@@ -402,15 +399,8 @@ static int __init generic_NCR5380_detect
}
#endif
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
- if (instance == NULL) {
-#ifndef SCSI_G_NCR5380_MEM
- release_region(overrides[current_override].NCR5380_map_name, region_size);
-#else
- iounmap(iomem);
- release_mem_region(base, NCR5380_region_size);
-#endif
- continue;
- }
+ if (instance == NULL)
+ goto out_release;
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
@@ -427,7 +417,8 @@ static int __init generic_NCR5380_detect
((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
#endif
- NCR5380_init(instance, flags);
+ if (NCR5380_init(instance, flags))
+ goto out_unregister;
if (overrides[current_override].board == BOARD_NCR53C400)
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
@@ -459,6 +450,17 @@ static int __init generic_NCR5380_detect
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_release:
+#ifndef SCSI_G_NCR5380_MEM
+ release_region(overrides[current_override].NCR5380_map_name, region_size);
+#else
+ iounmap(iomem);
+ release_mem_region(base, NCR5380_region_size);
+#endif
+ return count;
}
/**
@@ -475,15 +477,12 @@ static int generic_NCR5380_release_resou
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
-
#ifndef SCSI_G_NCR5380_MEM
release_region(instance->io_port, instance->n_io_port);
#else
iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
release_mem_region(instance->base, NCR5380_region_size);
#endif
-
-
return 0;
}
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:03:23.000000000 +1100
@@ -382,7 +382,9 @@ static int __init mac_scsi_probe(struct
#endif
host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
if (instance->irq != NO_IRQ) {
error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED,
@@ -407,6 +409,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
return error;
}
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:03:22.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:03:23.000000000 +1100
@@ -378,11 +378,12 @@ static int __init pas16_detect(struct sc
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
if(instance == NULL)
- break;
+ goto out;
instance->io_port = io_port;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, 0))
+ goto out_unregister;
NCR5380_maybe_reset_bus(instance);
@@ -418,6 +419,11 @@ static int __init pas16_detect(struct sc
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out:
+ return count;
}
/*
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:03:09.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:03:23.000000000 +1100
@@ -557,7 +557,9 @@ static int __init sun3_scsi_probe(struct
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
error = request_irq(instance->irq, scsi_sun3_intr, 0,
"NCR5380", instance);
@@ -604,6 +606,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
fail_alloc:
if (udc_regs)
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:03:22.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:03:23.000000000 +1100
@@ -208,12 +208,13 @@ static int __init t128_detect(struct scs
found:
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
if(instance == NULL)
- break;
-
+ goto out_unmap;
+
instance->base = base;
((struct NCR5380_hostdata *)instance->hostdata)->base = p;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, 0))
+ goto out_unregister;
NCR5380_maybe_reset_bus(instance);
@@ -246,6 +247,12 @@ found:
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_unmap:
+ iounmap(p);
+ return count;
}
static int t128_release(struct Scsi_Host *shost)
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 21/78] ncr5380: Sleep when polling, if possible
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (19 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 20/78] ncr5380: Introduce unbound workqueue Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 22/78] ncr5380: Eliminate selecting state Finn Thain
` (57 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-sleep-when-polling --]
[-- Type: text/plain, Size: 7901 bytes --]
When in process context, sleep during polling if doing so won't add
significant latency. In interrupt context or if the lock is held, poll
briefly then give up. Keep both core drivers in sync.
Calibrate busy-wait iterations to allow for variation in chip register
access times between different 5380 hardware implementations.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changed since v1:
- Don't rely on loops_per_jiffy to estimate register access speed, measure
it instead.
Changed since v2:
- As suggested by Geert Uytterhoeven: calibration now begins when jiffies
changes and is now less sensitive to small HZ values. Also uses a
power-of-two divisor to simplify arithmetic.
---
drivers/scsi/NCR5380.c | 82 ++++++++++++++++++++++++++-----------------
drivers/scsi/NCR5380.h | 1
drivers/scsi/atari_NCR5380.c | 64 ++++++++++++++++++++++-----------
3 files changed, 94 insertions(+), 53 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:26.000000000 +1100
@@ -293,44 +293,48 @@ static inline void initialize_SCp(struct
}
/**
- * NCR5380_poll_politely - wait for NCR5380 status bits
- * @instance: controller to poll
- * @reg: 5380 register to poll
- * @bit: Bitmask to check
- * @val: Value required to exit
- *
- * Polls the NCR5380 in a reasonably efficient manner waiting for
- * an event to occur, after a short quick poll we begin giving the
- * CPU back in non IRQ contexts
+ * NCR5380_poll_politely - wait for chip register value
+ * @instance: controller to poll
+ * @reg: 5380 register to poll
+ * @bit: Bitmask to check
+ * @val: Value required to exit
+ * @wait: Time-out in jiffies
+ *
+ * Polls the chip in a reasonably efficient manner waiting for an
+ * event to occur. After a short quick poll we begin to yield the CPU
+ * (if possible). In irq contexts the time-out is arbitrarily limited.
+ * Callers may hold locks as long as they are held in irq mode.
*
- * Returns the value of the register or a negative error code.
+ * Returns 0 if event occurred otherwise -ETIMEDOUT.
*/
-
-static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t)
+
+static int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int wait)
{
- int n = 500; /* At about 8uS a cycle for the cpu access */
- unsigned long end = jiffies + t;
- int r;
-
- while( n-- > 0)
- {
- r = NCR5380_read(reg);
- if((r & bit) == val)
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long deadline = jiffies + wait;
+ unsigned long n;
+
+ /* Busy-wait for up to 10 ms */
+ n = min(10000U, jiffies_to_usecs(wait));
+ n *= hostdata->accesses_per_ms;
+ n /= 1000;
+ do {
+ if ((NCR5380_read(reg) & bit) == val)
return 0;
cpu_relax();
- }
-
- /* t time yet ? */
- while(time_before(jiffies, end))
- {
- r = NCR5380_read(reg);
- if((r & bit) == val)
+ } while (n--);
+
+ if (irqs_disabled() || in_interrupt())
+ return -ETIMEDOUT;
+
+ /* Repeatedly sleep for 1 ms until deadline */
+ while (time_is_after_jiffies(deadline)) {
+ schedule_timeout_uninterruptible(1);
+ if ((NCR5380_read(reg) & bit) == val)
return 0;
- if(!in_interrupt())
- cond_resched();
- else
- cpu_relax();
}
+
return -ETIMEDOUT;
}
@@ -773,6 +777,7 @@ static int NCR5380_init(struct Scsi_Host
{
int i;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ unsigned long deadline;
if(in_interrupt())
printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
@@ -812,6 +817,21 @@ static int NCR5380_init(struct Scsi_Host
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
+
+ /* Calibrate register polling loop */
+ i = 0;
+ deadline = jiffies + 1;
+ do {
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ deadline += msecs_to_jiffies(256);
+ do {
+ NCR5380_read(STATUS_REG);
+ ++i;
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ hostdata->accesses_per_ms = i / 256;
+
return 0;
}
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:26.000000000 +1100
@@ -479,43 +479,48 @@ static inline void initialize_SCp(struct
}
/**
- * NCR5380_poll_politely - wait for NCR5380 status bits
+ * NCR5380_poll_politely - wait for chip register value
* @instance: controller to poll
* @reg: 5380 register to poll
* @bit: Bitmask to check
* @val: Value required to exit
+ * @wait: Time-out in jiffies
*
- * Polls the NCR5380 in a reasonably efficient manner waiting for
- * an event to occur, after a short quick poll we begin giving the
- * CPU back in non IRQ contexts
+ * Polls the chip in a reasonably efficient manner waiting for an
+ * event to occur. After a short quick poll we begin to yield the CPU
+ * (if possible). In irq contexts the time-out is arbitrarily limited.
+ * Callers may hold locks as long as they are held in irq mode.
*
- * Returns the value of the register or a negative error code.
+ * Returns 0 if event occurred otherwise -ETIMEDOUT.
*/
static int NCR5380_poll_politely(struct Scsi_Host *instance,
- int reg, int bit, int val, int t)
+ int reg, int bit, int val, int wait)
{
- int n = 500;
- unsigned long end = jiffies + t;
- int r;
-
- while (n-- > 0) {
- r = NCR5380_read(reg);
- if ((r & bit) == val)
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long deadline = jiffies + wait;
+ unsigned long n;
+
+ /* Busy-wait for up to 10 ms */
+ n = min(10000U, jiffies_to_usecs(wait));
+ n *= hostdata->accesses_per_ms;
+ n /= 1000;
+ do {
+ if ((NCR5380_read(reg) & bit) == val)
return 0;
cpu_relax();
- }
+ } while (n--);
+
+ if (irqs_disabled() || in_interrupt())
+ return -ETIMEDOUT;
- /* t time yet ? */
- while (time_before(jiffies, end)) {
- r = NCR5380_read(reg);
- if ((r & bit) == val)
+ /* Repeatedly sleep for 1 ms until deadline */
+ while (time_is_after_jiffies(deadline)) {
+ schedule_timeout_uninterruptible(1);
+ if ((NCR5380_read(reg) & bit) == val)
return 0;
- if (!in_interrupt())
- cond_resched();
- else
- cpu_relax();
}
+
return -ETIMEDOUT;
}
@@ -811,6 +816,7 @@ static int __init NCR5380_init(struct Sc
{
int i;
SETUP_HOSTDATA(instance);
+ unsigned long deadline;
hostdata->host = instance;
hostdata->id_mask = 1 << instance->this_id;
@@ -845,6 +851,20 @@ static int __init NCR5380_init(struct Sc
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
+ /* Calibrate register polling loop */
+ i = 0;
+ deadline = jiffies + 1;
+ do {
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ deadline += msecs_to_jiffies(256);
+ do {
+ NCR5380_read(STATUS_REG);
+ ++i;
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ hostdata->accesses_per_ms = i / 256;
+
return 0;
}
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:26.000000000 +1100
@@ -285,6 +285,7 @@ struct NCR5380_hostdata {
unsigned spin_max_w;
#endif
struct workqueue_struct *work_q;
+ unsigned long accesses_per_ms; /* chip register accesses per ms */
};
#ifdef __KERNEL__
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 22/78] ncr5380: Eliminate selecting state
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (20 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 21/78] ncr5380: Sleep when polling, if possible Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 23/78] ncr5380: Always retry arbitration and selection Finn Thain
` (56 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: ncr5380-eliminate-selecting-state --]
[-- Type: text/plain, Size: 10254 bytes --]
Linux v2.1.105 changed the algorithm for polling for the BSY signal
in NCR5380_select() and NCR5380_main().
Presently, this code has a bug. Back then, NCR5380_set_timer(hostdata, 1)
meant reschedule main() after sleeping for 10 ms. Repeated 25 times this
provided the recommended 250 ms selection time-out delay. This got broken
when HZ became configurable.
We could fix this but there's no need to reschedule the main loop. This
BSY polling presently happens when the NCR5380_main() work queue item
calls NCR5380_select(), which in turn schedules NCR5380_main(), which
calls NCR5380_select() again, and so on.
This algorithm is a deviation from the simpler one in atari_NCR5380.c.
The extra complexity and state is pointless. There's no reason to
stop selection half-way and return to to the main loop when the main
loop can do nothing useful until selection completes.
So just poll for BSY. We can sleep while polling now that we have a
suitable workqueue.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 74 ++++++++-----------------------------------
drivers/scsi/NCR5380.h | 2 -
drivers/scsi/atari_NCR5380.c | 49 ++++++++--------------------
3 files changed, 29 insertions(+), 96 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:26.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:28.000000000 +1100
@@ -988,7 +988,7 @@ static void NCR5380_main(struct work_str
do {
/* Lock held here */
done = 1;
- if (!hostdata->connected && !hostdata->selecting) {
+ if (!hostdata->connected) {
dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no);
/*
* Search through the issue_queue for a command destined
@@ -1018,9 +1018,6 @@ static void NCR5380_main(struct work_str
*/
dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun);
- hostdata->selecting = NULL;
- /* RvC: have to preset this to indicate a new command is being performed */
-
/*
* REQUEST SENSE commands are issued without tagged
* queueing, even on SCSI-II devices because the
@@ -1038,26 +1035,13 @@ static void NCR5380_main(struct work_str
done = 0;
dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no);
}
- if (hostdata->connected ||
- hostdata->selecting)
+ if (hostdata->connected)
break;
/* lock held here still */
} /* if target/lun is not busy */
} /* for */
/* exited locked */
} /* if (!hostdata->connected) */
- if (hostdata->selecting) {
- tmp = (struct scsi_cmnd *) hostdata->selecting;
- /* Selection will drop and retake the lock */
- if (!NCR5380_select(instance, tmp)) {
- /* OK or bad target */
- } else {
- LIST(tmp, hostdata->issue_queue);
- tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = tmp;
- done = 0;
- }
- } /* if hostdata->selecting */
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dmalen
@@ -1176,7 +1160,6 @@ static irqreturn_t NCR5380_intr(int dumm
* Returns : -1 if selection failed but should be retried.
* 0 if selection failed and should not be retried.
* 0 if selection succeeded completely (hostdata->connected == cmd).
- * 0 if selection in progress (hostdata->selecting == cmd).
*
* Side effects :
* If bus busy, arbitration failed, etc, NCR5380_select() will exit
@@ -1200,13 +1183,8 @@ static int NCR5380_select(struct Scsi_Ho
unsigned char tmp[3], phase;
unsigned char *data;
int len;
- unsigned long timeout;
- unsigned char value;
int err;
- if (hostdata->selecting)
- goto part2;
-
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
@@ -1342,33 +1320,9 @@ static int NCR5380_select(struct Scsi_Ho
* selection.
*/
- timeout = jiffies + msecs_to_jiffies(250);
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
-
- hostdata->select_time = 0; /* we count the clock ticks at which we polled */
- hostdata->selecting = cmd;
-
-part2:
- /* RvC: here we enter after a sleeping period, or immediately after
- execution of part 1
- we poll only once ech clock tick */
- value = NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO);
-
- if (!value && (hostdata->select_time < HZ/4)) {
- /* RvC: we still must wait for a device response */
- hostdata->select_time++; /* after 25 ticks the device has failed */
- NCR5380_set_timer(hostdata, 1);
- return 0; /* RvC: we return here with hostdata->selecting set,
- to go to sleep */
- }
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
+ msecs_to_jiffies(250));
- hostdata->selecting = NULL;/* clear this pointer, because we passed the
- waiting period */
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
@@ -1376,6 +1330,17 @@ part2:
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
}
+
+ if (err < 0) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ cmd->result = DID_BAD_TARGET << 16;
+ cmd->scsi_done(cmd);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n",
+ instance->host_no);
+ return 0;
+ }
+
/*
* No less than two deskew delays after the initiator detects the
* BSY signal is true, it shall release the SEL signal and may
@@ -1386,15 +1351,6 @@ part2:
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->result = DID_BAD_TARGET << 16;
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
- return 0;
- }
-
/*
* Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:26.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:28.000000000 +1100
@@ -267,8 +267,6 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
int flags;
unsigned long time_expires; /* in jiffies, set prior to sleeping */
- int select_time; /* timer in select for target response */
- volatile struct scsi_cmnd *selecting;
struct delayed_work coroutine; /* our co-routine */
struct scsi_eh_save ses;
char info[256];
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:26.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:28.000000000 +1100
@@ -1431,7 +1431,7 @@ static int NCR5380_select(struct Scsi_Ho
unsigned char tmp[3], phase;
unsigned char *data;
int len;
- unsigned long timeout;
+ int err;
unsigned long flags;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
@@ -1605,25 +1605,8 @@ static int NCR5380_select(struct Scsi_Ho
* selection.
*/
- timeout = jiffies + msecs_to_jiffies(250);
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
-
-#if 0
- /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert
- * IO while SEL is true. But again, there are some disks out the in the
- * world that do that nevertheless. (Somebody claimed that this announces
- * reselection capability of the target.) So we better skip that test and
- * only wait for BSY... (Famous german words: Der Klügere gibt nach :-)
- */
-
- while (time_before(jiffies, timeout) &&
- !(NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO)))
- ;
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
+ msecs_to_jiffies(250));
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1633,22 +1616,8 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
}
-#else
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY))
- ;
-#endif
-
- /*
- * No less than two deskew delays after the initiator detects the
- * BSY signal is true, it shall release the SEL signal and may
- * change the DATA BUS. -wingel
- */
- udelay(1);
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
+ if (err < 0) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
#ifdef SUPPORT_TAGS
@@ -1661,6 +1630,16 @@ static int NCR5380_select(struct Scsi_Ho
}
/*
+ * No less than two deskew delays after the initiator detects the
+ * BSY signal is true, it shall release the SEL signal and may
+ * change the DATA BUS. -wingel
+ */
+
+ udelay(1);
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+
+ /*
* Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
* transfer phase should be a MESSAGE OUT phase so that we can send the
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 23/78] ncr5380: Always retry arbitration and selection
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (21 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 22/78] ncr5380: Eliminate selecting state Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
` (55 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-retry-selection-phase --]
[-- Type: text/plain, Size: 1966 bytes --]
If NCR5380_select() returns -1, it means arbitration was lost or selection
failed and should be retried. If the main loop simply terminates when there
are still commands on the issue queue, they will remain queued until they
expire.
Fix this by clearing the 'done' flag after selection failure or lost
arbitration.
The "else break" clause in NCR5380_main() that gets removed here appears
to be a vestige of a long-gone loop that iterated over host instances.
See commit 491447e1fcff ("[PATCH] next NCR5380 updates") in
history/history.git.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 3 +--
drivers/scsi/atari_NCR5380.c | 1 +
2 files changed, 2 insertions(+), 2 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:28.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:30.000000000 +1100
@@ -1052,8 +1052,7 @@ static void NCR5380_main(struct work_str
NCR5380_information_transfer(instance);
dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no);
done = 0;
- } else
- break;
+ }
} while (!done);
spin_unlock_irq(instance->host_lock);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:28.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:30.000000000 +1100
@@ -1181,6 +1181,7 @@ static void NCR5380_main(struct work_str
#endif
hostdata->retain_dma_intr--;
local_irq_restore(flags);
+ done = 0;
dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
"returned to issue_queue\n", HOSTNO);
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (22 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 23/78] ncr5380: Always retry arbitration and selection Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic Finn Thain
` (54 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-implement-NCR5380_dma_xfer_len --]
[-- Type: text/plain, Size: 9760 bytes --]
Follow the example of the atari_NCR5380.c core driver and adopt the
NCR5380_dma_xfer_len() hook. Implement NCR5380_dma_xfer_len() for dtc.c
and g_NCR5380.c to take care of the limitations of these cards. Keep the
default for drivers using PSEUDO_DMA.
Eliminate the unused macro LIMIT_TRANSFERSIZE.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 32 +++++---------------------------
drivers/scsi/arm/cumana_1.c | 3 +++
drivers/scsi/arm/oak.c | 2 ++
drivers/scsi/atari_NCR5380.c | 8 +++++---
drivers/scsi/dtc.c | 14 ++++++++++++++
drivers/scsi/dtc.h | 3 +++
drivers/scsi/g_NCR5380.c | 15 +++++++++++++++
drivers/scsi/g_NCR5380.h | 3 +++
drivers/scsi/mac_scsi.c | 1 +
drivers/scsi/pas16.h | 2 ++
drivers/scsi/t128.h | 2 ++
11 files changed, 55 insertions(+), 30 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:30.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:31.000000000 +1100
@@ -201,11 +201,6 @@
* DONT_USE_INTR - if defined, never use interrupts, even if we probe or
* override-configure an IRQ.
*
- * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512
- * bytes at a time. Since interrupts are disabled by default during
- * these transfers, we might need this to give reasonable interrupt
- * service time if the transfer size gets too large.
- *
* LINKED - if defined, linked commands are supported.
*
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
@@ -2000,29 +1995,12 @@ static void NCR5380_information_transfer
*/
#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL)
- /* KLL
- * PSEUDO_DMA is defined here. If this is the g_NCR5380
- * driver then it will always be defined, so the
- * FLAG_NO_PSEUDO_DMA is used to inhibit PDMA in the base
- * NCR5380 case. I think this is a fairly clean solution.
- * We supplement these 2 if's with the flag.
- */
-#ifdef NCR5380_dma_xfer_len
- if (!cmd->device->borken && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && (transfersize = NCR5380_dma_xfer_len(instance, cmd)) != 0) {
-#else
- transfersize = cmd->transfersize;
+ transfersize = 0;
+ if (!cmd->device->borken &&
+ !(hostdata->flags & FLAG_NO_PSEUDO_DMA))
+ transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
-#ifdef LIMIT_TRANSFERSIZE /* If we have problems with interrupt service */
- if (transfersize > 512)
- transfersize = 512;
-#endif /* LIMIT_TRANSFERSIZE */
-
- if (!cmd->device->borken && transfersize && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && cmd->SCp.this_residual && !(cmd->SCp.this_residual % transfersize)) {
- /* Limit transfers to 32K, for xx400 & xx406
- * pseudoDMA that transfers in 128 bytes blocks. */
- if (transfersize > 32 * 1024)
- transfersize = 32 * 1024;
-#endif
+ if (transfersize) {
len = transfersize;
if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) {
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:30.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:31.000000000 +1100
@@ -2170,11 +2170,13 @@ static void NCR5380_information_transfer
*/
#if defined(REAL_DMA)
- if (
#if !defined(CONFIG_SUN3)
- !cmd->device->borken &&
+ transfersize = 0;
+ if (!cmd->device->borken)
#endif
- (transfersize = NCR5380_dma_xfer_len(instance, cmd, phase)) >= DMA_MIN_SIZE) {
+ transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
+
+ if (transfersize >= DMA_MIN_SIZE) {
len = transfersize;
cmd->SCp.phase = phase;
if (NCR5380_transfer_dma(instance, &phase,
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:31.000000000 +1100
@@ -419,6 +419,20 @@ static inline int NCR5380_pwrite(struct
return (0);
}
+static int dtc_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+ int transfersize = cmd->transfersize;
+
+ /* Limit transfers to 32K, for xx400 & xx406
+ * pseudoDMA that transfers in 128 bytes blocks.
+ */
+ if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+ !(cmd->SCp.this_residual % transfersize))
+ transfersize = 32 * 1024;
+
+ return transfersize;
+}
+
MODULE_LICENSE("GPL");
#include "NCR5380.c"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:31.000000000 +1100
@@ -699,6 +699,21 @@ static inline int NCR5380_pwrite(struct
; // TIMEOUT
return 0;
}
+
+static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+ int transfersize = cmd->transfersize;
+
+ /* Limit transfers to 32K, for xx400 & xx406
+ * pseudoDMA that transfers in 128 bytes blocks.
+ */
+ if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+ !(cmd->SCp.this_residual % transfersize))
+ transfersize = 32 * 1024;
+
+ return transfersize;
+}
+
#endif /* PSEUDO_DMA */
/*
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:06.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:31.000000000 +1100
@@ -73,6 +73,9 @@
#endif
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ generic_NCR5380_dma_xfer_len(cmd)
+
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
#define NCR5380_abort generic_NCR5380_abort
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2016-01-03 16:03:31.000000000 +1100
@@ -27,6 +27,9 @@
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ dtc_dma_xfer_len(cmd)
+
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
#define NCR5380_abort dtc_abort
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:31.000000000 +1100
@@ -22,6 +22,9 @@
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_read(reg) cumanascsi_read(instance, reg)
#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
#define NCR5380_info cumanascsi_info
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:03:31.000000000 +1100
@@ -26,6 +26,8 @@
#define NCR5380_write(reg, value) \
writeb(value, priv(instance)->base + ((reg) << 2))
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
#define NCR5380_show_info oakscsi_show_info
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:03:31.000000000 +1100
@@ -38,6 +38,7 @@
#define NCR5380_pread macscsi_pread
#define NCR5380_pwrite macscsi_pwrite
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_intr macscsi_intr
#define NCR5380_queue_command macscsi_queue_command
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-01-03 16:03:31.000000000 +1100
@@ -110,6 +110,8 @@
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_intr pas16_intr
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-01-03 16:02:56.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-01-03 16:03:31.000000000 +1100
@@ -84,6 +84,8 @@
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_intr t128_intr
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (23 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 24/78] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
` (53 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-disconnection-reconnection --]
[-- Type: text/plain, Size: 17065 bytes --]
The atari_NCR5380.c and NCR5380.c core drivers differ in their handling of
target disconnection. This is partly because atari_NCR5380.c had all of
the polling and sleeping removed to become entirely interrupt-driven, and
it is partly because of damage done to NCR5380.c after atari_NCR5380.c was
forked. See commit 37cd23b44929 ("Linux 2.1.105") in history/history.git.
The polling changes that were made in v2.1.105 are questionable at best:
if REQ is not already asserted when NCR5380_transfer_pio() is invoked, and
if the expected phase is DATA IN or DATA OUT, the function will schedule
main() to execute after USLEEP_SLEEP jiffies and then return. The problems
here are the expected REQ timing and the sleep interval*. Avoid this issue
by using NCR5380_poll_politely() instead of scheduling main().
The atari_NCR5380.c core driver requires the use of the chip interrupt and
always permits target disconnection. It sets the cmd->device->disconnect
flag when a device disconnects, but never tests this flag.
The NCR5380.c core driver permits disconnection only when
instance->irq != NO_IRQ. It sets the cmd->device->disconnect flag when
a device disconnects and it tests this flag in a couple of places:
1. During NCR5380_information_transfer(), following COMMAND OUT phase,
if !cmd->device->disconnect, the initiator will take a guess as to
whether or not the target will then choose to go to MESSAGE IN phase
and disconnect. If the driver guesses "yes", it will schedule main()
to execute after USLEEP_SLEEP jiffies and then return there.
Unfortunately the driver may guess "yes" even after it has denied
the target the disconnection privilege. When the target does not
disconnect, the sleep can be beneficial, assuming the sleep interval
is appropriate (mostly it is not*).
And even if the driver guesses "yes" correctly, and the target would
then disconnect, the driver still has to go through the MESSAGE IN
phase in order to get to BUS FREE phase. The main loop can do nothing
useful until BUS FREE, and sleeping just delays the phase transition.
2. If !cmd->device->disconnect and REQ is not already asserted when
NCR5380_information_transfer() is invoked, the function polls for REQ
for USLEEP_POLL jiffies. If REQ is not asserted, it then schedules
main() to execute after USLEEP_SLEEP jiffies and returns.
The idea is apparently to yeild the CPU while waiting for REQ.
This is conditional upon !cmd->device->disconnect, but there seems
to be no rhyme or reason for that. For example, the flag may be
unset because disconnection privilege was denied because the driver
has no IRQ. Or the flag may be unset because the device has never
needed to disconnect before. Or if the flag is set, disconnection
may have no relevance to the present bus phase.
Another deficiency of the existing algorithm is as follows. When the
driver has no IRQ, it prevents disconnection, and generally polls and
sleeps more than it would normally. Now, if the driver is going to poll
anyway, why not allow the target to disconnect? That way the driver can do
something useful with the bus instead of polling unproductively!
Avoid this pointless latency, complexity and guesswork by using
NCR5380_poll_politely() instead of scheduling main().
* For g_NCR5380, the time intervals for USLEEP_SLEEP and USLEEP_POLL are
200 ms and 10 ms, respectively. They are 20 ms and 200 ms respectively
for the other NCR5380 drivers. There doesn't seem to be any reason for
this discrepancy. The timing seems to have no relation to the type of
adapter. Bizarrely, the timing in g_NCR5380 seems to relate only to one
particular type of target device. This patch attempts to solve the
problem for all NCR5380 drivers and all target devices.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 137 ++-----------------------------------------
drivers/scsi/NCR5380.h | 11 ---
drivers/scsi/atari_NCR5380.c | 24 ++-----
drivers/scsi/g_NCR5380.c | 4 -
4 files changed, 15 insertions(+), 161 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:33.000000000 +1100
@@ -139,17 +139,7 @@
* piece of hardware that requires you to sit in a loop polling for
* the REQ signal as long as you are connected. Some devices are
* brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations.
- *
- * The workaround for this is to keep track of devices that have
- * disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
- *
- * while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
- * on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
+ * while doing long seek operations. [...] These
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
*
@@ -220,10 +210,6 @@
* Defaults for these will be provided although the user may want to adjust
* these to allocate CPU resources to the SCSI driver or "real" code.
*
- * USLEEP_SLEEP - amount of time, in jiffies, to sleep
- *
- * USLEEP_POLL - amount of time, in jiffies, to poll
- *
* These macros MUST be defined :
*
* NCR5380_read(register) - read from the specified register
@@ -449,73 +435,6 @@ static void NCR5380_print_phase(struct S
}
#endif
-/*
- * These need tweaking, and would probably work best as per-device
- * flags initialized differently for disk, tape, cd, etc devices.
- * People with broken devices are free to experiment as to what gives
- * the best results for them.
- *
- * USLEEP_SLEEP should be a minimum seek time.
- *
- * USLEEP_POLL should be a maximum rotational latency.
- */
-#ifndef USLEEP_SLEEP
-/* 20 ms (reasonable hard disk speed) */
-#define USLEEP_SLEEP msecs_to_jiffies(20)
-#endif
-/* 300 RPM (floppy speed) */
-#ifndef USLEEP_POLL
-#define USLEEP_POLL msecs_to_jiffies(200)
-#endif
-
-/*
- * Function : int should_disconnect (unsigned char cmd)
- *
- * Purpose : decide whether a command would normally disconnect or
- * not, since if it won't disconnect we should go to sleep.
- *
- * Input : cmd - opcode of SCSI command
- *
- * Returns : DISCONNECT_LONG if we should disconnect for a really long
- * time (ie always, sleep, look for REQ active, sleep),
- * DISCONNECT_TIME_TO_DATA if we would only disconnect for a normal
- * time-to-data delay, DISCONNECT_NONE if this command would return
- * immediately.
- *
- * Future sleep algorithms based on time to data can exploit
- * something like this so they can differentiate between "normal"
- * (ie, read, write, seek) and unusual commands (ie, * format).
- *
- * Note : We don't deal with commands that handle an immediate disconnect,
- *
- */
-
-static int should_disconnect(unsigned char cmd)
-{
- switch (cmd) {
- case READ_6:
- case WRITE_6:
- case SEEK_6:
- case READ_10:
- case WRITE_10:
- case SEEK_10:
- return DISCONNECT_TIME_TO_DATA;
- case FORMAT_UNIT:
- case SEARCH_HIGH:
- case SEARCH_LOW:
- case SEARCH_EQUAL:
- return DISCONNECT_LONG;
- default:
- return DISCONNECT_NONE;
- }
-}
-
-static void NCR5380_set_timer(struct NCR5380_hostdata *hostdata, unsigned long timeout)
-{
- hostdata->time_expires = jiffies + timeout;
- queue_delayed_work(hostdata->work_q, &hostdata->coroutine, timeout);
-}
-
static int probe_irq __initdata;
@@ -614,9 +533,6 @@ static void prepare_info(struct Scsi_Hos
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
"flags { %s%s%s%s}, "
-#if defined(USLEEP_POLL) && defined(USLEEP_SLEEP)
- "USLEEP_POLL %lu, USLEEP_SLEEP %lu, "
-#endif
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
instance->base, instance->irq,
@@ -626,9 +542,6 @@ static void prepare_info(struct Scsi_Hos
hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
-#if defined(USLEEP_POLL) && defined(USLEEP_SLEEP)
- USLEEP_POLL, USLEEP_SLEEP,
-#endif
#ifdef AUTOPROBE_IRQ
"AUTOPROBE_IRQ "
#endif
@@ -804,7 +717,6 @@ static int NCR5380_init(struct Scsi_Host
hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags;
hostdata->host = instance;
- hostdata->time_expires = 0;
prepare_info(instance);
@@ -1041,7 +953,6 @@ static void NCR5380_main(struct work_str
#ifdef REAL_DMA
&& !hostdata->dmalen
#endif
- && (!hostdata->time_expires || time_before_eq(hostdata->time_expires, jiffies))
) {
dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no);
NCR5380_information_transfer(instance);
@@ -1421,11 +1332,6 @@ static int NCR5380_transfer_pio(struct S
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
- /*
- * RvC: some administrative data to process polling time
- */
- int break_allowed = 0;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
if (!(p & SR_IO))
dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c);
@@ -1440,35 +1346,19 @@ static int NCR5380_transfer_pio(struct S
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
- /* RvC: don't know if this is necessary, but other SCSI I/O is short
- * so breaks are not necessary there
- */
- if ((p == PHASE_DATAIN) || (p == PHASE_DATAOUT)) {
- break_allowed = 1;
- }
do {
/*
* Wait for assertion of REQ, after which the phase bits will be
* valid
*/
- /* RvC: we simply poll once, after that we stop temporarily
- * and let the device buffer fill up
- * if breaking is not allowed, we keep polling as long as needed
- */
-
- /* FIXME */
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ) && !break_allowed);
- if (!(tmp & SR_REQ)) {
- /* timeout condition */
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
+ if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- }
dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no);
/* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no);
NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance);
break;
@@ -1940,8 +1830,6 @@ static void NCR5380_information_transfer
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
- /* RvC: we need to set the end of the polling time */
- unsigned long poll_time = jiffies + USLEEP_POLL;
while (1) {
tmp = NCR5380_read(STATUS_REG);
@@ -2141,7 +2029,6 @@ static void NCR5380_information_transfer
case DISCONNECT:{
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->device->disconnect = 1;
LIST(cmd, hostdata->disconnected_queue);
cmd->host_scribble = (unsigned char *)
hostdata->disconnected_queue;
@@ -2273,11 +2160,6 @@ static void NCR5380_information_transfer
* use the dma transfer function.
*/
NCR5380_transfer_pio(instance, &phase, &len, &data);
- if (!cmd->device->disconnect && should_disconnect(cmd->cmnd[0])) {
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, "scsi%d : issued command, sleeping until %lu\n", instance->host_no, hostdata->time_expires);
- return;
- }
break;
case PHASE_STATIN:
len = 1;
@@ -2289,15 +2171,10 @@ static void NCR5380_information_transfer
printk("scsi%d : unknown phase\n", instance->host_no);
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
- } /* if (tmp * SR_REQ) */
- else {
- /* RvC: go to sleep if polling time expired
- */
- if (!cmd->device->disconnect && time_after_eq(jiffies, poll_time)) {
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, "scsi%d : poll timed out, sleeping until %lu\n", instance->host_no, hostdata->time_expires);
- return;
- }
+ } else {
+ spin_unlock_irq(instance->host_lock);
+ NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(instance->host_lock);
}
} /* while (1) */
}
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:28.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:33.000000000 +1100
@@ -205,16 +205,6 @@
#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
-/*
- * The internal should_disconnect() function returns these based on the
- * expected length of a disconnect if a device supports disconnect/
- * reconnect.
- */
-
-#define DISCONNECT_NONE 0
-#define DISCONNECT_TIME_TO_DATA 1
-#define DISCONNECT_LONG 2
-
/*
* "Special" value for the (unsigned char) command tag, to indicate
* I_T_L nexus instead of I_T_L_Q.
@@ -266,7 +256,6 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
int flags;
- unsigned long time_expires; /* in jiffies, set prior to sleeping */
struct delayed_work coroutine; /* our co-routine */
struct scsi_eh_save ses;
char info[256];
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:33.000000000 +1100
@@ -126,17 +126,7 @@
* piece of hardware that requires you to sit in a loop polling for
* the REQ signal as long as you are connected. Some devices are
* brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations.
- *
- * The workaround for this is to keep track of devices that have
- * disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
- *
- * while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
- * on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
+ * while doing long seek operations. [...] These
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
*
@@ -1740,13 +1730,14 @@ static int NCR5380_transfer_pio(struct S
* Wait for assertion of REQ, after which the phase bits will be
* valid
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- ;
+
+ if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
+ break;
dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
/* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
@@ -2399,7 +2390,6 @@ static void NCR5380_information_transfer
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
local_irq_save(flags);
- cmd->device->disconnect = 1;
LIST(cmd,hostdata->disconnected_queue);
SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
@@ -2564,7 +2554,9 @@ static void NCR5380_information_transfer
printk("scsi%d: unknown phase\n", HOSTNO);
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
- } /* if (tmp * SR_REQ) */
+ } else {
+ NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ }
} /* while (1) */
}
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:33.000000000 +1100
@@ -56,10 +56,6 @@
*
*/
-/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP_POLL msecs_to_jiffies(10)
-#define USLEEP_SLEEP msecs_to_jiffies(200)
-
#define AUTOPROBE_IRQ
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (24 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 25/78] ncr5380: Rework disconnect versus poll logic Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler Finn Thain
` (52 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-fix-transfer_pio --]
[-- Type: text/plain, Size: 3390 bytes --]
According to the SCSI-2 draft revision 10L, atari_NCR5380.c is correct
when it says that the phase lines are valid up until ACK is negated
following the transmission of the last byte in MESSAGE IN phase. This is
true for all information transfer phases, from target to initiator.
Sample the phase bits in STATUS_REG so that NCR5380_transfer_pio() can
return the correct result. The return value is presently unused (perhaps
because of bugs like this) but this change at least fixes the caller's
phase variable, which is passed by reference.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 12 +++++++++---
drivers/scsi/atari_NCR5380.c | 11 ++++++-----
2 files changed, 15 insertions(+), 8 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:33.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:35.000000000 +1100
@@ -1393,8 +1393,10 @@ static int NCR5380_transfer_pio(struct S
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
}
- /* FIXME - if this fails bus reset ?? */
- NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 5*HZ);
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
+ break;
+
dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no);
/*
@@ -1421,7 +1423,11 @@ static int NCR5380_transfer_pio(struct S
*count = c;
*data = d;
tmp = NCR5380_read(STATUS_REG);
- if (tmp & SR_REQ)
+ /* The phase read from the bus is valid if either REQ is (already)
+ * asserted or if ACK hasn't been released yet. The latter applies if
+ * we're in MSG IN, DATA IN or STATUS and all bytes have been received.
+ */
+ if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0))
*phase = tmp & PHASE_MASK;
else
*phase = PHASE_UNKNOWN;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:33.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:35.000000000 +1100
@@ -1776,8 +1776,9 @@ static int NCR5380_transfer_pio(struct S
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
}
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
+ break;
dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
@@ -1806,10 +1807,10 @@ static int NCR5380_transfer_pio(struct S
*data = d;
tmp = NCR5380_read(STATUS_REG);
/* The phase read from the bus is valid if either REQ is (already)
- * asserted or if ACK hasn't been released yet. The latter is the case if
- * we're in MSGIN and all wanted bytes have been received.
+ * asserted or if ACK hasn't been released yet. The latter applies if
+ * we're in MSG IN, DATA IN or STATUS and all bytes have been received.
*/
- if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0))
+ if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0))
*phase = tmp & PHASE_MASK;
else
*phase = PHASE_UNKNOWN;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (25 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 26/78] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
` (51 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-spin_unlock-crash --]
[-- Type: text/plain, Size: 3587 bytes --]
The host spin lock needs to be acquired by NCR5380_abort() before it calls
NCR5380_select(). This patch doesn't actually fix the EH issues in this
driver but it does avoid this:
BUG: spinlock already unlocked on CPU#0, kworker/u4:1/14
lock: 0xc0c0f834, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1
CPU: 0 PID: 14 Comm: kworker/u4:1 Not tainted 3.15.5 #5
Workqueue: scsi_tmf_4 scmd_eh_abort_handler
Call Trace:
[ef885d70] [c0008acc] show_stack+0x70/0x1bc (unreliable)
[ef885db0] [c0492a00] dump_stack+0x84/0x684
[ef885dc0] [c006f314] spin_dump+0xd0/0xe8
[ef885dd0] [c006f460] do_raw_spin_unlock+0xd4/0xd8
[ef885df0] [c0491c8c] _raw_spin_unlock_irq+0x10/0x3c
[ef885e00] [f381fe3c] NCR5380_select+0x3e4/0x6e8 [dmx3191d]
[ef885e40] [f382026c] NCR5380_abort+0x12c/0x190 [dmx3191d]
[ef885e60] [c02fec9c] scmd_eh_abort_handler+0x100/0x460
[ef885e80] [c0046470] process_one_work+0x16c/0x420
[ef885ea0] [c0046870] worker_thread+0x14c/0x430
[ef885ed0] [c004e4f4] kthread+0xd8/0xec
[ef885f40] [c00124d4] ret_from_kernel_thread+0x5c/0x64
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:35.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:37.000000000 +1100
@@ -2374,6 +2374,7 @@ static int NCR5380_abort(struct scsi_cmn
scmd_printk(KERN_WARNING, cmd, "aborting command\n");
+ spin_lock_irq(instance->host_lock);
NCR5380_print_status(instance);
dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
@@ -2420,6 +2421,7 @@ static int NCR5380_abort(struct scsi_cmn
REMOVE(5, *prev, tmp, tmp->host_scribble);
(*prev) = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
+ spin_unlock_irq(instance->host_lock);
tmp->result = DID_ABORT << 16;
dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
tmp->scsi_done(tmp);
@@ -2443,6 +2445,7 @@ static int NCR5380_abort(struct scsi_cmn
*/
if (hostdata->connected) {
+ spin_unlock_irq(instance->host_lock);
dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no);
return FAILED;
}
@@ -2475,8 +2478,10 @@ static int NCR5380_abort(struct scsi_cmn
if (cmd == tmp) {
dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
- if (NCR5380_select(instance, cmd))
+ if (NCR5380_select(instance, cmd)) {
+ spin_unlock_irq(instance->host_lock);
return FAILED;
+ }
dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
do_abort(instance);
@@ -2486,6 +2491,7 @@ static int NCR5380_abort(struct scsi_cmn
REMOVE(5, *prev, tmp, tmp->host_scribble);
*prev = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
+ spin_unlock_irq(instance->host_lock);
tmp->result = DID_ABORT << 16;
tmp->scsi_done(tmp);
return SUCCESS;
@@ -2500,6 +2506,7 @@ static int NCR5380_abort(struct scsi_cmn
* so we won't panic, but we will notify the user in case something really
* broke.
*/
+ spin_unlock_irq(instance->host_lock);
printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
" before abortion\n", instance->host_no);
return FAILED;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (26 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 27/78] ncr5380: Add missing lock in eh_abort_handler Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 29/78] ncr5380: Remove references to linked commands Finn Thain
` (50 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-drop-DEF_SCSI_QCMD --]
[-- Type: text/plain, Size: 3827 bytes --]
Remove the DEF_SCSI_QCMD macro (already removed from atari_NCR5380.c). The
lock provided by DEF_SCSI_QCMD is only needed for queue data structures.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 30 +++++++++++++++---------------
drivers/scsi/atari_NCR5380.c | 2 +-
2 files changed, 16 insertions(+), 16 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:37.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:38.000000000 +1100
@@ -808,22 +808,21 @@ static void NCR5380_exit(struct Scsi_Hos
}
/**
- * NCR5380_queue_command - queue a command
- * @cmd: SCSI command
- * @done: completion handler
+ * NCR5380_queue_command - queue a command
+ * @instance: the relevant SCSI adapter
+ * @cmd: SCSI command
*
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
- * main coroutine is not running, it is restarted.
- *
- * Locks: host lock taken by caller
+ * cmd is added to the per-instance issue queue, with minor
+ * twiddling done to the host specific fields of cmd. If the
+ * main coroutine is not running, it is restarted.
*/
-static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *))
+static int NCR5380_queue_command(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- struct Scsi_Host *instance = cmd->device->host;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
struct scsi_cmnd *tmp;
+ unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
switch (cmd->cmnd[0]) {
@@ -831,7 +830,7 @@ static int NCR5380_queue_command_lck(str
case WRITE_10:
printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n", instance->host_no);
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
@@ -842,9 +841,10 @@ static int NCR5380_queue_command_lck(str
*/
cmd->host_scribble = NULL;
- cmd->scsi_done = done;
cmd->result = 0;
+ spin_lock_irqsave(instance->host_lock, flags);
+
/*
* Insert the cmd into the issue queue. Note that REQUEST SENSE
* commands are added to the head of the queue since any command will
@@ -861,6 +861,8 @@ static int NCR5380_queue_command_lck(str
LIST(cmd, tmp);
tmp->host_scribble = (unsigned char *) cmd;
}
+ spin_unlock_irqrestore(instance->host_lock, flags);
+
dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
/* Run the coroutine if it isn't already running. */
@@ -869,8 +871,6 @@ static int NCR5380_queue_command_lck(str
return 0;
}
-static DEF_SCSI_QCMD(NCR5380_queue_command)
-
/**
* NCR5380_main - NCR state machines
*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:35.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:38.000000000 +1100
@@ -930,7 +930,7 @@ static void NCR5380_exit(struct Scsi_Hos
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
*
- * cmd is added to the per instance issue_queue, with minor
+ * cmd is added to the per-instance issue queue, with minor
* twiddling done to the host specific fields of cmd. If the
* main coroutine is not running, it is restarted.
*/
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 29/78] ncr5380: Remove references to linked commands
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (27 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 28/78] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
` (49 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-LINKED --]
[-- Type: text/plain, Size: 6732 bytes --]
From: Hannes Reinecke <hare@suse.de>
Some old drivers partially implemented support for linked commands using
a "proposed" next_link pointer in struct scsi_cmnd that never actually
existed. Remove this code.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
This is a modified version of Hannes' patch so I have dropped his
signed-off-by tag. This version has a rewritten commit log and also
removes additional references to linked commands from comments. This
version also omits the sun3_NCR5380.c changes since that file no
longer exists.
---
drivers/scsi/NCR5380.c | 42 ------------------------------
drivers/scsi/atari_NCR5380.c | 60 -------------------------------------------
2 files changed, 102 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:38.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:39.000000000 +1100
@@ -78,9 +78,6 @@
*
* 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
- *
- * 5. Test linked command handling code after Eric is ready with
- * the high level code.
*/
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_transport_spi.h>
@@ -94,7 +91,6 @@
#endif
#ifndef notyet
-#undef LINKED
#undef REAL_DMA
#endif
@@ -191,8 +187,6 @@
* DONT_USE_INTR - if defined, never use interrupts, even if we probe or
* override-configure an IRQ.
*
- * LINKED - if defined, linked commands are supported.
- *
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
@@ -1923,42 +1917,6 @@ static void NCR5380_information_transfer
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked command complete.\n", instance->host_no, cmd->device->id, cmd->device->lun);
- /*
- * Sanity check : A linked command should only terminate with
- * one of these messages if there are more linked commands
- * available.
- */
- if (!cmd->next_link) {
- printk("scsi%d : target %d lun %llu linked command complete, no next_link\n" instance->host_no, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun);
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:38.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:39.000000000 +1100
@@ -66,12 +66,6 @@
*
*/
-/*
- * Further development / testing that should be done :
- * 1. Test linked command handling code after Eric is ready with
- * the high level code.
- */
-
/* Adapted for the sun3 by Sam Creasey. */
#include <scsi/scsi_dbg.h>
@@ -98,10 +92,6 @@
#define REMOVE(w,x,y,z)
#endif
-#ifndef notyet
-#undef LINKED
-#endif
-
/*
* Design
*
@@ -172,8 +162,6 @@
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
* transceivers.
*
- * LINKED - if defined, linked commands are supported.
- *
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
@@ -2216,54 +2204,6 @@ static void NCR5380_information_transfer
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %llu "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (28 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 29/78] ncr5380: Remove references to linked commands Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
` (48 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-missing-break --]
[-- Type: text/plain, Size: 926 bytes --]
MESSAGE REJECT does not imply DISCONNECT: the target is about to enter
MESSAGE IN or MESSAGE OUT phase.
This bug fix comes from atari_NCR5380.c. Unfortunately it never made it
into the original NCR5380.c core driver.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 1 +
1 file changed, 1 insertion(+)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:39.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:40.000000000 +1100
@@ -1990,6 +1990,7 @@ static void NCR5380_information_transfer
default:
break;
}
+ break;
case DISCONNECT:{
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort()
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (29 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 30/78] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 32/78] ncr5380: Fix bus phase " Finn Thain
` (47 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-do_abort-vs-poll_politely --]
[-- Type: text/plain, Size: 1962 bytes --]
NCR5380_poll_politely() never returns -1. That means do_abort() can fail
to handle a timeout after waiting for the target to negate REQ. Fix this
and cleanup other NCR5380_poll_politely() call sites.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:40.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:41.000000000 +1100
@@ -1271,7 +1271,7 @@ static int NCR5380_select(struct Scsi_Ho
err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
spin_lock_irq(instance->host_lock);
- if(err) {
+ if (err < 0) {
printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
@@ -1490,8 +1490,7 @@ static int do_abort(struct Scsi_Host *in
*/
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
-
- if(rc < 0)
+ if (rc < 0)
return -1;
tmp = (unsigned char)rc;
@@ -1502,7 +1501,7 @@ static int do_abort(struct Scsi_Host *in
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if(rc == -1)
+ if (rc < 0)
return -1;
}
tmp = ABORT;
@@ -2199,7 +2198,8 @@ static void NCR5380_reselect(struct Scsi
* FIXME: timeout needed and fail to work queeu
*/
- if(NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 2*HZ))
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0)
abort = 1;
len = 1;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 32/78] ncr5380: Fix bus phase in do_abort()
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (30 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 31/78] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts Finn Thain
` (46 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-do_abort-vs-bus-phase --]
[-- Type: text/plain, Size: 1270 bytes --]
NCR5380_poll_politely() returns either 0 (success) or -ETIMEDOUT. However,
in do_abort(), the return value is incorrectly taken to be the status
register value. This means that the bus is put into DATA OUT phase instead
of MESSAGE OUT. Fix this.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:41.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:42.000000000 +1100
@@ -1493,11 +1493,11 @@ static int do_abort(struct Scsi_Host *in
if (rc < 0)
return -1;
- tmp = (unsigned char)rc;
+ tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
+ if (tmp != PHASE_MSGOUT) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (31 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 32/78] ncr5380: Fix bus phase " Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
` (45 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-do_abort-timeouts --]
[-- Type: text/plain, Size: 4645 bytes --]
Use timeouts in do_abort() in atari_NCR5380.c instead of infinite loops.
Also fix the kernel-doc comment. Keep the two core driver forks in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 26 +++++++++++++-------------
drivers/scsi/atari_NCR5380.c | 34 +++++++++++++++++++++-------------
2 files changed, 34 insertions(+), 26 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:39.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:43.000000000 +1100
@@ -1835,19 +1835,19 @@ static void do_reset(struct Scsi_Host *i
local_irq_restore(flags);
}
-/*
- * Function : do_abort (Scsi_Host *host)
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
*
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
+ * Returns 0 on success, -1 on failure.
*/
static int do_abort(struct Scsi_Host *instance)
{
unsigned char tmp, *msgptr, phase;
int len;
+ int rc;
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1862,16 +1862,20 @@ static int do_abort(struct Scsi_Host *in
* the target sees, so we just handshake.
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- ;
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
+ if (rc < 0)
+ goto timeout;
+
+ tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- ;
+ if (tmp != PHASE_MSGOUT) {
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
+ if (rc < 0)
+ goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
@@ -1887,6 +1891,10 @@ static int do_abort(struct Scsi_Host *in
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:42.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:43.000000000 +1100
@@ -1458,16 +1458,12 @@ static void do_reset(struct Scsi_Host *i
local_irq_restore(flags);
}
-/*
- * Function : do_abort (Scsi_Host *host)
- *
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
*
- * Locks: queue lock held by caller
- * FIXME: sort this out and get new_eh running
+ * Returns 0 on success, -1 on failure.
*/
static int do_abort(struct Scsi_Host *instance)
@@ -1489,9 +1485,9 @@ static int do_abort(struct Scsi_Host *in
* the target sees, so we just handshake.
*/
- rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
if (rc < 0)
- return -1;
+ goto timeout;
tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
@@ -1500,9 +1496,9 @@ static int do_abort(struct Scsi_Host *in
if (tmp != PHASE_MSGOUT) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
if (rc < 0)
- return -1;
+ goto timeout;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
tmp = ABORT;
msgptr = &tmp;
@@ -1516,6 +1512,10 @@ static int do_abort(struct Scsi_Host *in
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (32 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 33/78] atari_NCR5380: Set do_abort() timeouts Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-24 10:38 ` Geert Uytterhoeven
2016-01-03 5:05 ` [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
` (44 subsequent siblings)
78 siblings, 1 reply; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-use-arbitration-timeout --]
[-- Type: text/plain, Size: 6275 bytes --]
Allow target selection to fail with a timeout instead of waiting in
infinite loops. This gets rid of the unused NCR_TIMEOUT macro, it is more
defensive and has proved helpful in debugging.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 44 ++++++++++++++++++---------------
drivers/scsi/atari_NCR5380.c | 57 ++++++++++++++++++-------------------------
2 files changed, 49 insertions(+), 52 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:43.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:44.000000000 +1100
@@ -1412,6 +1412,7 @@ static int NCR5380_select(struct Scsi_Ho
int len;
int err;
unsigned long flags;
+ unsigned long timeout;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
@@ -1436,42 +1437,28 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(MODE_REG, MR_ARBITRATE);
- local_irq_restore(flags);
+ /* The chip now waits for BUS FREE phase. Then after the 800 ns
+ * Bus Free Delay, arbitration will begin.
+ */
- /* Wait for arbitration logic to complete */
-#if defined(NCR_TIMEOUT)
- {
- unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
-
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
- time_before(jiffies, timeout) && !hostdata->connected)
- ;
- if (time_after_eq(jiffies, timeout)) {
- printk("scsi : arbitration timeout at %d\n", __LINE__);
+ local_irq_restore(flags);
+ timeout = jiffies + HZ;
+ while (1) {
+ if (time_is_before_jiffies(timeout)) {
NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
return -1;
}
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ return -1;
+ }
+ if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
+ break;
}
-#else /* NCR_TIMEOUT */
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
- !hostdata->connected)
- ;
-#endif
-
- dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
-
- if (hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- return -1;
- }
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
+ /* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
/* Check for lost arbitration */
@@ -1634,8 +1621,14 @@ static int NCR5380_select(struct Scsi_Ho
*/
/* Wait for start of REQ/ACK handshake */
- while (!(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
+
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ if (err < 0) {
+ shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return -1;
+ }
dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
HOSTNO, cmd->device->id);
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:43.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:44.000000000 +1100
@@ -1083,6 +1083,7 @@ static int NCR5380_select(struct Scsi_Ho
unsigned char *data;
int len;
int err;
+ unsigned long timeout;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
@@ -1101,28 +1102,31 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(MODE_REG, MR_ARBITRATE);
+ /* The chip now waits for BUS FREE phase. Then after the 800 ns
+ * Bus Free Delay, arbitration will begin.
+ */
- /* We can be relaxed here, interrupts are on, we are
- in workqueue context, the birds are singing in the trees */
spin_unlock_irq(instance->host_lock);
- err = NCR5380_poll_politely(instance, INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, ICR_ARBITRATION_PROGRESS, 5*HZ);
- spin_lock_irq(instance->host_lock);
- if (err < 0) {
- printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
+ timeout = jiffies + HZ;
+ while (1) {
+ if (time_is_before_jiffies(timeout)) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
+ spin_lock_irq(instance->host_lock);
+ return -1;
+ }
+ spin_lock_irq(instance->host_lock);
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ return -1;
+ }
+ if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
+ break;
+ spin_unlock_irq(instance->host_lock);
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no);
-
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
-
+ /* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
/* Check for lost arbitration */
@@ -1270,9 +1274,9 @@ static int NCR5380_select(struct Scsi_Ho
spin_unlock_irq(instance->host_lock);
err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
spin_lock_irq(instance->host_lock);
-
if (err < 0) {
- printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
+ shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
@ 2016-01-24 10:38 ` Geert Uytterhoeven
2016-01-25 2:45 ` Finn Thain
0 siblings, 1 reply; 94+ messages in thread
From: Geert Uytterhoeven @ 2016-01-24 10:38 UTC (permalink / raw)
To: Finn Thain
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
Linux/m68k, scsi, linux-kernel
Hi Finn,
On Sun, Jan 3, 2016 at 6:05 AM, Finn Thain <fthain@telegraphics.com.au> wrote:
> Allow target selection to fail with a timeout instead of waiting in
> infinite loops. This gets rid of the unused NCR_TIMEOUT macro, it is more
> defensive and has proved helpful in debugging.
>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
> Reviewed-by: Hannes Reinecke <hare@suse.com>
> Tested-by: Ondrej Zary <linux@rainbow-software.org>
> Tested-by: Michael Schmitz <schmitzmic@gmail.com>
This patch (commit 55500d9b08295e3b6016b53879dea1cb7787f1b0) causes a hang
on ARAnyM with atari_defconfig after:
scsi host0: Atari native SCSI, io_port 0x0, n_io_port 0, base 0x0,
irq 15, can_queue 8, cmd_per_lun 1, sg_tablesize 0, this_id 7, flags {
}, options { REAL_DMA SUPPORT_TAGS }
blk_queue_max_segments: set to minimum 1
> --- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:43.000000000 +1100
> +++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:44.000000000 +1100
> @@ -1436,42 +1437,28 @@ static int NCR5380_select(struct Scsi_Ho
> NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
> NCR5380_write(MODE_REG, MR_ARBITRATE);
>
> - local_irq_restore(flags);
> + /* The chip now waits for BUS FREE phase. Then after the 800 ns
> + * Bus Free Delay, arbitration will begin.
> + */
>
> - /* Wait for arbitration logic to complete */
> -#if defined(NCR_TIMEOUT)
> - {
> - unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
> -
> - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
> - time_before(jiffies, timeout) && !hostdata->connected)
> - ;
> - if (time_after_eq(jiffies, timeout)) {
> - printk("scsi : arbitration timeout at %d\n", __LINE__);
> + local_irq_restore(flags);
> + timeout = jiffies + HZ;
> + while (1) {
> + if (time_is_before_jiffies(timeout)) {
> NCR5380_write(MODE_REG, MR_BASE);
> - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> + shost_printk(KERN_ERR, instance,
> + "select: arbitration timeout\n");
> return -1;
> }
> + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
This newly added check always triggers, causing an infinite loop calling
NCR5380_select().
Perhaps this is an ARAnyM quirk?
If not, does it trigger (on some hardware) with drivers/scsi/NCR5380.c, too?
> + /* Reselection interrupt */
> + return -1;
> + }
> + if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
> + break;
> }
> -#else /* NCR_TIMEOUT */
> - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
> - !hostdata->connected)
> - ;
> -#endif
> -
> - dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
> -
> - if (hostdata->connected) {
> - NCR5380_write(MODE_REG, MR_BASE);
> - return -1;
> - }
> - /*
> - * The arbitration delay is 2.2us, but this is a minimum and there is
> - * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
> - * the integral nature of udelay().
> - *
> - */
>
> + /* The SCSI-2 arbitration delay is 2.4 us */
> udelay(3);
>
> /* Check for lost arbitration */
On current mainline, this (whitespace-damaged) patch fixed the issue for me:
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -1253,10 +1253,6 @@ static struct scsi_cmnd *NCR5380_select(struct
Scsi_Host *instance,
INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
ICR_ARBITRATION_PROGRESS, HZ);
spin_lock_irq(&hostdata->lock);
- if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
- /* Reselection interrupt */
- goto out;
- }
if (err < 0) {
NCR5380_write(MODE_REG, MR_BASE);
shost_printk(KERN_ERR, instance,
@@ -1297,10 +1293,6 @@ static struct scsi_cmnd *NCR5380_select(struct
Scsi_Host *instance,
spin_lock_irq(&hostdata->lock);
- /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
- if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
- goto out;
-
if (!hostdata->selecting) {
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-24 10:38 ` Geert Uytterhoeven
@ 2016-01-25 2:45 ` Finn Thain
2016-01-25 8:05 ` Geert Uytterhoeven
0 siblings, 1 reply; 94+ messages in thread
From: Finn Thain @ 2016-01-25 2:45 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
On Sun, 24 Jan 2016, Geert Uytterhoeven wrote:
> Hi Finn,
>
> On Sun, Jan 3, 2016 at 6:05 AM, Finn Thain <fthain@telegraphics.com.au> wrote:
> > Allow target selection to fail with a timeout instead of waiting in
> > infinite loops. This gets rid of the unused NCR_TIMEOUT macro, it is more
> > defensive and has proved helpful in debugging.
> >
> > Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
> > Reviewed-by: Hannes Reinecke <hare@suse.com>
> > Tested-by: Ondrej Zary <linux@rainbow-software.org>
> > Tested-by: Michael Schmitz <schmitzmic@gmail.com>
>
> This patch (commit 55500d9b08295e3b6016b53879dea1cb7787f1b0) causes a hang
> on ARAnyM with atari_defconfig after:
>
> scsi host0: Atari native SCSI, io_port 0x0, n_io_port 0, base 0x0,
> irq 15, can_queue 8, cmd_per_lun 1, sg_tablesize 0, this_id 7, flags {
> }, options { REAL_DMA SUPPORT_TAGS }
> blk_queue_max_segments: set to minimum 1
>
> > --- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:43.000000000 +1100
> > +++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:44.000000000 +1100
> > @@ -1436,42 +1437,28 @@ static int NCR5380_select(struct Scsi_Ho
> > NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
> > NCR5380_write(MODE_REG, MR_ARBITRATE);
> >
> > - local_irq_restore(flags);
> > + /* The chip now waits for BUS FREE phase. Then after the 800 ns
> > + * Bus Free Delay, arbitration will begin.
> > + */
> >
> > - /* Wait for arbitration logic to complete */
> > -#if defined(NCR_TIMEOUT)
> > - {
> > - unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
> > -
> > - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
> > - time_before(jiffies, timeout) && !hostdata->connected)
> > - ;
> > - if (time_after_eq(jiffies, timeout)) {
> > - printk("scsi : arbitration timeout at %d\n", __LINE__);
> > + local_irq_restore(flags);
> > + timeout = jiffies + HZ;
> > + while (1) {
> > + if (time_is_before_jiffies(timeout)) {
> > NCR5380_write(MODE_REG, MR_BASE);
> > - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > + shost_printk(KERN_ERR, instance,
> > + "select: arbitration timeout\n");
> > return -1;
> > }
> > + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
>
> This newly added check always triggers, causing an infinite loop calling
> NCR5380_select().
If you bisected and got a failure here, it would not be surprising because
some of the remaining patches fix bugs in the exception handlers.
But if you test the entire patch series and get a hang (after waiting for
the command to timeout and abort etc) it could be caused by a known bug in
the abort handler. I will be sending a patch for that.
It can be helpful to enable scsi error recovery logging. E.g.
# scsi_logging_level -s -E 5
and/or assign the value from /proc/sys/dev/scsi/logging_level to the
scsi_logging_level kernel parameter.
> Perhaps this is an ARAnyM quirk?
I'd say this is an ARAnyM bug. atari_scsi has been tested on an actual
Atari Falcon, hence Michael's tested-by tag.
> If not, does it trigger (on some hardware) with drivers/scsi/NCR5380.c,
> too?
For the arbitration and selection phases, there is no difference between
NCR5380.c and atari_NCR5380.c. That's one of the benefits of my patches.
That means this code was tested on silicon from NCR (53C400), Symbios
Logic (53C400A), AMD (Am85C80), Domex Technology Corp (DTC-536, DTC-436)
and LOGIC Devices (L5380).
>
> > + /* Reselection interrupt */
> > + return -1;
> > + }
> > + if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
> > + break;
> > }
> > -#else /* NCR_TIMEOUT */
> > - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
> > - !hostdata->connected)
> > - ;
> > -#endif
> > -
> > - dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
> > -
> > - if (hostdata->connected) {
> > - NCR5380_write(MODE_REG, MR_BASE);
> > - return -1;
> > - }
> > - /*
> > - * The arbitration delay is 2.2us, but this is a minimum and there is
> > - * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
> > - * the integral nature of udelay().
> > - *
> > - */
> >
> > + /* The SCSI-2 arbitration delay is 2.4 us */
> > udelay(3);
> >
> > /* Check for lost arbitration */
>
> On current mainline, this (whitespace-damaged) patch fixed the issue for me:
>
> --- a/drivers/scsi/atari_NCR5380.c
> +++ b/drivers/scsi/atari_NCR5380.c
> @@ -1253,10 +1253,6 @@ static struct scsi_cmnd *NCR5380_select(struct
> Scsi_Host *instance,
> INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
> ICR_ARBITRATION_PROGRESS, HZ);
> spin_lock_irq(&hostdata->lock);
> - if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
> - /* Reselection interrupt */
> - goto out;
> - }
> if (err < 0) {
> NCR5380_write(MODE_REG, MR_BASE);
> shost_printk(KERN_ERR, instance,
> @@ -1297,10 +1293,6 @@ static struct scsi_cmnd *NCR5380_select(struct
> Scsi_Host *instance,
>
> spin_lock_irq(&hostdata->lock);
>
> - /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
> - if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
> - goto out;
> -
> if (!hostdata->selecting) {
> NCR5380_write(MODE_REG, MR_BASE);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
>
The MR_ARBITRATE bit should remain set until the driver clears it (or the
reset logic clears it). But it looks like aranym simply discards writes to
the mode register, such that reads always return 0.
Compare
http://sourceforge.net/p/aranym/code/ci/master/tree/src/ncr5380.cpp
with the MAME/MESS emulated device
https://github.com/mamedev/mame/blob/master/src/devices/machine/ncr5380.cpp
I don't know what the Hatari emulator does.
In principle I think that Linux drivers should not carry workarounds for
emulators.
--
> Gr{oetje,eeting}s,
>
> Geert
>
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-25 2:45 ` Finn Thain
@ 2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
` (2 more replies)
0 siblings, 3 replies; 94+ messages in thread
From: Geert Uytterhoeven @ 2016-01-25 8:05 UTC (permalink / raw)
To: Finn Thain
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
Linux/m68k, scsi, linux-kernel
Hi Finn,
On Mon, Jan 25, 2016 at 3:45 AM, Finn Thain <fthain@telegraphics.com.au> wrote:
> On Sun, 24 Jan 2016, Geert Uytterhoeven wrote:
>> On Sun, Jan 3, 2016 at 6:05 AM, Finn Thain <fthain@telegraphics.com.au> wrote:
>> > Allow target selection to fail with a timeout instead of waiting in
>> > infinite loops. This gets rid of the unused NCR_TIMEOUT macro, it is more
>> > defensive and has proved helpful in debugging.
>> >
>> > Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
>> > Reviewed-by: Hannes Reinecke <hare@suse.com>
>> > Tested-by: Ondrej Zary <linux@rainbow-software.org>
>> > Tested-by: Michael Schmitz <schmitzmic@gmail.com>
>>
>> This patch (commit 55500d9b08295e3b6016b53879dea1cb7787f1b0) causes a hang
>> on ARAnyM with atari_defconfig after:
>>
>> scsi host0: Atari native SCSI, io_port 0x0, n_io_port 0, base 0x0,
>> irq 15, can_queue 8, cmd_per_lun 1, sg_tablesize 0, this_id 7, flags {
>> }, options { REAL_DMA SUPPORT_TAGS }
>> blk_queue_max_segments: set to minimum 1
>>
>> > --- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:43.000000000 +1100
>> > +++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:44.000000000 +1100
>> > @@ -1436,42 +1437,28 @@ static int NCR5380_select(struct Scsi_Ho
>> > NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
>> > NCR5380_write(MODE_REG, MR_ARBITRATE);
>> >
>> > - local_irq_restore(flags);
>> > + /* The chip now waits for BUS FREE phase. Then after the 800 ns
>> > + * Bus Free Delay, arbitration will begin.
>> > + */
>> >
>> > - /* Wait for arbitration logic to complete */
>> > -#if defined(NCR_TIMEOUT)
>> > - {
>> > - unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
>> > -
>> > - while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
>> > - time_before(jiffies, timeout) && !hostdata->connected)
>> > - ;
>> > - if (time_after_eq(jiffies, timeout)) {
>> > - printk("scsi : arbitration timeout at %d\n", __LINE__);
>> > + local_irq_restore(flags);
>> > + timeout = jiffies + HZ;
>> > + while (1) {
>> > + if (time_is_before_jiffies(timeout)) {
>> > NCR5380_write(MODE_REG, MR_BASE);
>> > - NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
>> > + shost_printk(KERN_ERR, instance,
>> > + "select: arbitration timeout\n");
>> > return -1;
>> > }
>> > + if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
>>
>> This newly added check always triggers, causing an infinite loop calling
>> NCR5380_select().
>
> If you bisected and got a failure here, it would not be surprising because
> some of the remaining patches fix bugs in the exception handlers.
>
> But if you test the entire patch series and get a hang (after waiting for
> the command to timeout and abort etc) it could be caused by a known bug in
> the abort handler. I will be sending a patch for that.
Yes, this was bisected. The issue was originally noticed after merging in
upstream, though.
Awaiting your patch for testing...
>> Perhaps this is an ARAnyM quirk?
>
> I'd say this is an ARAnyM bug. atari_scsi has been tested on an actual
> Atari Falcon, hence Michael's tested-by tag.
>
>> If not, does it trigger (on some hardware) with drivers/scsi/NCR5380.c,
>> too?
>
> For the arbitration and selection phases, there is no difference between
> NCR5380.c and atari_NCR5380.c. That's one of the benefits of my patches.
>
> That means this code was tested on silicon from NCR (53C400), Symbios
> Logic (53C400A), AMD (Am85C80), Domex Technology Corp (DTC-536, DTC-436)
> and LOGIC Devices (L5380).
> The MR_ARBITRATE bit should remain set until the driver clears it (or the
> reset logic clears it). But it looks like aranym simply discards writes to
> the mode register, such that reads always return 0.
>
> Compare
> http://sourceforge.net/p/aranym/code/ci/master/tree/src/ncr5380.cpp
> with the MAME/MESS emulated device
> https://github.com/mamedev/mame/blob/master/src/devices/machine/ncr5380.cpp
>
> I don't know what the Hatari emulator does.
>
> In principle I think that Linux drivers should not carry workarounds for
> emulators.
Please consider ARAnyM is the current m68k workhorse, so it would be
nice to handle this someway.
Alternatively, we need to fix ARAnyM, or can make the creation of the
atari_scsi platform device conditional on not running under ARAnyM.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-25 8:05 ` Geert Uytterhoeven
@ 2016-01-25 18:28 ` Andreas Schwab
2016-01-25 19:56 ` Michael Schmitz
2016-01-26 0:18 ` Finn Thain
2 siblings, 0 replies; 94+ messages in thread
From: Andreas Schwab @ 2016-01-25 18:28 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Finn Thain, James E.J. Bottomley, Martin K. Petersen,
Michael Schmitz, Linux/m68k, scsi, linux-kernel
Geert Uytterhoeven <geert@linux-m68k.org> writes:
> Alternatively, we need to fix ARAnyM, or can make the creation of the
> atari_scsi platform device conditional on not running under ARAnyM.
Given the ncr5380 emulation in ARAnyM is just a stub, making it less a
stub would be preferred.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 94+ messages in thread
* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
@ 2016-01-25 19:56 ` Michael Schmitz
2016-01-26 0:18 ` Finn Thain
2 siblings, 0 replies; 94+ messages in thread
From: Michael Schmitz @ 2016-01-25 19:56 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Finn Thain, James E.J. Bottomley, Martin K. Petersen, Linux/m68k,
scsi, linux-kernel
Hi Geert,
On Mon, Jan 25, 2016 at 9:05 PM, Geert Uytterhoeven
<geert@linux-m68k.org> wrote:
>>> Perhaps this is an ARAnyM quirk?
>
>> The MR_ARBITRATE bit should remain set until the driver clears it (or the
>> reset logic clears it). But it looks like aranym simply discards writes to
>> the mode register, such that reads always return 0.
>>
>> Compare
>> http://sourceforge.net/p/aranym/code/ci/master/tree/src/ncr5380.cpp
>> with the MAME/MESS emulated device
>> https://github.com/mamedev/mame/blob/master/src/devices/machine/ncr5380.cpp
>>
>> I don't know what the Hatari emulator does.
>>
>> In principle I think that Linux drivers should not carry workarounds for
>> emulators.
>
> Please consider ARAnyM is the current m68k workhorse, so it would be
> nice to handle this someway.
>
> Alternatively, we need to fix ARAnyM, or can make the creation of the
> atari_scsi platform device conditional on not running under ARAnyM.
Should be possible based on the machine cookie, unless that gets
munged by kernel startup code.
(Making the 5380 emulation a bit more complete such as in the MAME
source snippet would be my preference, too)
Cheers,
Michael
>
> Thanks!
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-25 8:05 ` Geert Uytterhoeven
2016-01-25 18:28 ` Andreas Schwab
2016-01-25 19:56 ` Michael Schmitz
@ 2016-01-26 0:18 ` Finn Thain
2016-01-26 11:13 ` Geert Uytterhoeven
2 siblings, 1 reply; 94+ messages in thread
From: Finn Thain @ 2016-01-26 0:18 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
Linux/m68k, scsi, linux-kernel
On Mon, 25 Jan 2016, Geert Uytterhoeven wrote:
> > In principle I think that Linux drivers should not carry workarounds
> > for emulators.
>
> Please consider ARAnyM is the current m68k workhorse, so it would be
> nice to handle this someway.
AFAICT atari_scsi on aranym never did anything useful. Those aranym users
who need to run Linux 4.5 can set CONFIG_ATARI_SCSI=n or blacklist the
atari_scsi module (up until aranym can be patched).
>
> Alternatively, we need to fix ARAnyM,
I'll look into writing a patch for the emulator after I've finished
testing the exception handling fixes for the driver.
> or can make the creation of the atari_scsi platform device conditional
> on not running under ARAnyM.
Fixing the emulator is the only sensible approach. If S operating systems
have to carry workarounds for B emulator bugs, the cost is (at least)
proportional to S * B.
--
^ permalink raw reply [flat|nested] 94+ messages in thread
* Re: [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout
2016-01-26 0:18 ` Finn Thain
@ 2016-01-26 11:13 ` Geert Uytterhoeven
0 siblings, 0 replies; 94+ messages in thread
From: Geert Uytterhoeven @ 2016-01-26 11:13 UTC (permalink / raw)
To: Finn Thain
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
Linux/m68k, scsi, linux-kernel
Hi Finn,
On Tue, Jan 26, 2016 at 1:18 AM, Finn Thain <fthain@telegraphics.com.au> wrote:
> On Mon, 25 Jan 2016, Geert Uytterhoeven wrote:
>> > In principle I think that Linux drivers should not carry workarounds
>> > for emulators.
>>
>> Please consider ARAnyM is the current m68k workhorse, so it would be
>> nice to handle this someway.
>
> AFAICT atari_scsi on aranym never did anything useful. Those aranym users
> who need to run Linux 4.5 can set CONFIG_ATARI_SCSI=n or blacklist the
> atari_scsi module (up until aranym can be patched).
FTR. adding "initcall_blacklist=atari_scsi_driver_init" to the kernel command
line makes it boot again.
>> Alternatively, we need to fix ARAnyM,
>
> I'll look into writing a patch for the emulator after I've finished
> testing the exception handling fixes for the driver.
Thank you!
>> or can make the creation of the atari_scsi platform device conditional
>> on not running under ARAnyM.
>
> Fixing the emulator is the only sensible approach. If S operating systems
> have to carry workarounds for B emulator bugs, the cost is (at least)
> proportional to S * B.
Sure.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 94+ messages in thread
* [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (33 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 34/78] atari_NCR5380: Use arbitration timeout Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work Finn Thain
` (43 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-dont-wait-for-bus-free --]
[-- Type: text/plain, Size: 3720 bytes --]
When there is a queued command and no connected command, NCR5380_select()
is called and arbitration begins. The chip waits for BUS FREE once the
MR_ARBITRATE bit in the mode register is enabled. That means there is
no need to wait for BUS FREE after disconnecting.
There is presently no polling for BUS FREE after sending an ABORT or
other message that might lead to disconnection. It only happens after
COMMAND COMPLETE or DISCONNECT messages, which seems inconsistent.
Remove the polling for !BSY in the COMMAND COMPLETE and DISCONNECT
cases.
BTW, the comments say "avoid nasty timeouts" and perhaps BUS FREE polling
was somehow helpful back in Linux v0.99.14u, when it was introduced.
The relevant timeout is presently 1 second (for bus arbitration).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 7 -------
drivers/scsi/atari_NCR5380.c | 11 -----------
2 files changed, 18 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:44.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:46.000000000 +1100
@@ -1976,9 +1976,6 @@ static void NCR5380_information_transfer
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
-
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
@@ -2011,10 +2008,6 @@ static void NCR5380_information_transfer
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts - FIXME timeout !*/
- /* NCR538_poll_politely(instance, STATUS_REG, SR_BSY, 0, 30 * HZ); */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
return;
}
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:44.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:46.000000000 +1100
@@ -2213,7 +2213,6 @@ static void NCR5380_information_transfer
"completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
local_irq_save(flags);
- hostdata->retain_dma_intr++;
hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
@@ -2282,8 +2281,6 @@ static void NCR5380_information_transfer
cmd->scsi_done(cmd);
}
- local_irq_restore(flags);
-
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
@@ -2291,11 +2288,6 @@ static void NCR5380_information_transfer
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
-
- local_irq_save(flags);
- hostdata->retain_dma_intr--;
/* ++roman: For Falcon SCSI, release the lock on the
* ST-DMA here if no other commands are waiting on the
* disconnected queue.
@@ -2349,9 +2341,6 @@ static void NCR5380_information_transfer
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (34 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 35/78] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm Finn Thain
` (42 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-work_struct-instead --]
[-- Type: text/plain, Size: 3201 bytes --]
Each host instance now has it's own work queue so the main() work item can
sleep when necessary. That means we can use a simple work item rather than
a delayed work item. This brings NCR5380.c closer to atari_NCR5380.c.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 12 +++++-------
drivers/scsi/NCR5380.h | 1 -
2 files changed, 5 insertions(+), 8 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:46.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:47.000000000 +1100
@@ -697,7 +697,7 @@ static int NCR5380_init(struct Scsi_Host
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
- INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main);
+ INIT_WORK(&hostdata->main_task, NCR5380_main);
hostdata->work_q = alloc_workqueue("ncr5380_%d",
WQ_UNBOUND | WQ_MEM_RECLAIM,
1, instance->host_no);
@@ -797,7 +797,7 @@ static void NCR5380_exit(struct Scsi_Hos
{
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- cancel_delayed_work_sync(&hostdata->coroutine);
+ cancel_work_sync(&hostdata->main_task);
destroy_workqueue(hostdata->work_q);
}
@@ -859,9 +859,8 @@ static int NCR5380_queue_command(struct
dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
- /* Run the coroutine if it isn't already running. */
/* Kick off command processing */
- queue_delayed_work(hostdata->work_q, &hostdata->coroutine, 0);
+ queue_work(hostdata->work_q, &hostdata->main_task);
return 0;
}
@@ -880,7 +879,7 @@ static int NCR5380_queue_command(struct
static void NCR5380_main(struct work_struct *work)
{
struct NCR5380_hostdata *hostdata =
- container_of(work, struct NCR5380_hostdata, coroutine.work);
+ container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
struct scsi_cmnd *tmp, *prev;
int done;
@@ -1037,8 +1036,7 @@ static irqreturn_t NCR5380_intr(int dumm
} /* if BASR_IRQ */
spin_unlock_irqrestore(instance->host_lock, flags);
if(!done)
- queue_delayed_work(hostdata->work_q,
- &hostdata->coroutine, 0);
+ queue_work(hostdata->work_q, &hostdata->main_task);
} while (!done);
return IRQ_HANDLED;
}
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:33.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:47.000000000 +1100
@@ -256,7 +256,6 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
int flags;
- struct delayed_work coroutine; /* our co-routine */
struct scsi_eh_save ses;
char info[256];
int read_overruns; /* number of bytes to cut from a
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (35 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 36/78] ncr5380: Use work_struct instead of delayed_work Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 38/78] ncr5380: Remove UNSAFE macro Finn Thain
` (41 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-main_running-and-queue_main --]
[-- Type: text/plain, Size: 6428 bytes --]
The complex main_running/queue_main mechanism is peculiar to
atari_NCR5380.c. It isn't SMP safe and offers little value given that
the work queue already offers concurrency management. Remove this
complexity to bring atari_NCR5380.c closer to NCR5380.c.
It is not a good idea to call the information transfer state machine from
queuecommand because, according to Documentation/scsi/scsi_mid_low_api.txt
that could happen in soft irq context. Fix this.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.h | 1
drivers/scsi/atari_NCR5380.c | 80 +++----------------------------------------
2 files changed, 6 insertions(+), 75 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:47.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:48.000000000 +1100
@@ -262,7 +262,6 @@ struct NCR5380_hostdata {
* transfer to handle chip overruns */
int retain_dma_intr;
struct work_struct main_task;
- volatile int main_running;
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
#endif
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:46.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:48.000000000 +1100
@@ -602,36 +602,6 @@ static void NCR5380_print_phase(struct S
#endif
-/*
- * ++roman: New scheme of calling NCR5380_main()
- *
- * If we're not in an interrupt, we can call our main directly, it cannot be
- * already running. Else, we queue it on a task queue, if not 'main_running'
- * tells us that a lower level is already executing it. This way,
- * 'main_running' needs not be protected in a special way.
- *
- * queue_main() is a utility function for putting our main onto the task
- * queue, if main_running is false. It should be called only from a
- * interrupt or bottom half.
- */
-
-#include <linux/gfp.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-static inline void queue_main(struct NCR5380_hostdata *hostdata)
-{
- if (!hostdata->main_running) {
- /* If in interrupt and NCR5380_main() not already running,
- queue it on the 'immediate' task queue, to be processed
- immediately after the current interrupt processing has
- finished. */
- queue_work(hostdata->work_q, &hostdata->main_task);
- }
- /* else: nothing to do: the running NCR5380_main() will pick up
- any newly queued command. */
-}
-
/**
* NCR58380_info - report driver and host information
* @instance: relevant scsi host instance
@@ -714,8 +684,6 @@ static void __maybe_unused NCR5380_print
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
local_irq_save(flags);
- printk("NCR5380: coroutine is%s running.\n",
- hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
printk("scsi%d: no currently connected command\n", HOSTNO);
else
@@ -757,8 +725,6 @@ static int __maybe_unused NCR5380_show_i
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
local_irq_save(flags);
- seq_printf(m, "NCR5380: coroutine is%s running.\n",
- hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
else
@@ -997,17 +963,8 @@ static int NCR5380_queue_command(struct
dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
(cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
- /* If queue_command() is called from an interrupt (real one or bottom
- * half), we let queue_main() do the job of taking care about main. If it
- * is already running, this is a no-op, else main will be queued.
- *
- * If we're not in an interrupt, we can call NCR5380_main()
- * unconditionally, because it cannot be already running.
- */
- if (in_interrupt() || irqs_disabled())
- queue_main(hostdata);
- else
- NCR5380_main(&hostdata->main_task);
+ /* Kick off command processing */
+ queue_work(hostdata->work_q, &hostdata->main_task);
return 0;
}
@@ -1044,30 +1001,11 @@ static void NCR5380_main(struct work_str
unsigned long flags;
/*
- * We run (with interrupts disabled) until we're sure that none of
- * the host adapters have anything that can be done, at which point
- * we set main_running to 0 and exit.
- *
- * Interrupts are enabled before doing various other internal
- * instructions, after we've decided that we need to run through
- * the loop again.
- *
- * this should prevent any race conditions.
- *
* ++roman: Just disabling the NCR interrupt isn't sufficient here,
* because also a timer int can trigger an abort or reset, which can
* alter queues and touch the Falcon lock.
*/
- /* Tell int handlers main() is now already executing. Note that
- no races are possible here. If an int comes in before
- 'main_running' is set here, and queues/executes main via the
- task queue, it doesn't do any harm, just this instance of main
- won't find any work left to do. */
- if (hostdata->main_running)
- return;
- hostdata->main_running = 1;
-
local_save_flags(flags);
do {
local_irq_disable(); /* Freeze request queues */
@@ -1182,11 +1120,6 @@ static void NCR5380_main(struct work_str
done = 0;
}
} while (!done);
-
- /* Better allow ints _after_ 'main_running' has been cleared, else
- an interrupt could believe we'll pick up the work it left for
- us, but we won't see it anymore here... */
- hostdata->main_running = 0;
local_irq_restore(flags);
}
@@ -1299,6 +1232,7 @@ static void NCR5380_dma_complete(struct
static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
struct Scsi_Host *instance = dev_id;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int done = 1, handled = 0;
unsigned char basr;
@@ -1367,11 +1301,9 @@ static irqreturn_t NCR5380_intr(int irq,
#endif
}
- if (!done) {
- dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
- /* Put a call to NCR5380_main() on the queue... */
- queue_main(shost_priv(instance));
- }
+ if (!done)
+ queue_work(hostdata->work_q, &hostdata->main_task);
+
return IRQ_RETVAL(handled);
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 38/78] ncr5380: Remove UNSAFE macro
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (36 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 37/78] ncr5380: Standardize work queueing algorithm Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 39/78] ncr5380: Standardize interrupt handling Finn Thain
` (40 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-UNSAFE-macro --]
[-- Type: text/plain, Size: 3369 bytes --]
Configuring core drivers using macros like this one prevents re-unifying
the core driver forks, and prevents implementing the core driver as a
library or a platform driver.
The UNSAFE macro in particular is a poor workaround for the problem of
interrupt latency. Releasing the locks complicates things because then we
would have to handle the possibility of EH handler invocation during a
PDMA transfer.
The comments say that instead of using this macro, "you're going to be
better off twiddling with transfersize". I agree. Remove this stuff.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 15 ---------------
drivers/scsi/dtc.c | 2 --
drivers/scsi/pas16.c | 1 -
3 files changed, 18 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:47.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:49.000000000 +1100
@@ -195,12 +195,6 @@
* rely on phase mismatch and EOP interrupts to determine end
* of phase.
*
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
- * only really want to use this if you're having a problem with
- * dropped characters during high speed communications, and even
- * then, you're going to be better off twiddling with transfersize
- * in the high level code.
- *
* Defaults for these will be provided although the user may want to adjust
* these to allocate CPU resources to the SCSI driver or "real" code.
*
@@ -554,9 +548,6 @@ static void prepare_info(struct Scsi_Hos
#ifdef PSEUDO_DMA
"PSEUDO_DMA "
#endif
-#ifdef UNSAFE
- "UNSAFE "
-#endif
"");
}
@@ -1582,9 +1573,6 @@ static int NCR5380_transfer_dma(struct S
* before the setting of DMA mode to after transfer of the last byte.
*/
-#if defined(PSEUDO_DMA) && defined(UNSAFE)
- spin_unlock_irq(instance->host_lock);
-#endif
/* KLL May need eop and parity in 53c400 */
if (hostdata->flags & FLAG_NCR53C400)
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
@@ -1793,9 +1781,6 @@ static int NCR5380_transfer_dma(struct S
*data = d + c;
*count = 0;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-#if defined(PSEUDO_DMA) && defined(UNSAFE)
- spin_lock_irq(instance->host_lock);
-#endif /* defined(REAL_DMA_POLL) */
return foo;
#endif /* def REAL_DMA */
}
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:49.000000000 +1100
@@ -1,7 +1,5 @@
-
#define PSEUDO_DMA
#define DONT_USE_INTR
-#define UNSAFE /* Leave interrupts enabled during pseudo-dma I/O */
#define DMA_WORKS_RIGHT
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:03:49.000000000 +1100
@@ -1,5 +1,4 @@
#define PSEUDO_DMA
-#define UNSAFE /* Not unsafe for PAS16 -- use it */
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 39/78] ncr5380: Standardize interrupt handling
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (37 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 38/78] ncr5380: Remove UNSAFE macro Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
` (39 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-standardize-interrupt-handling --]
[-- Type: text/plain, Size: 23763 bytes --]
Because interrupt handling is crucial to the core driver(s), all wrapper
drivers need to agree on this code. This patch removes discrepancies.
NCR5380_intr() in NCR5380.c has the following pointless loop that differs
from the code in atari_NCR5380.c.
done = 1;
do {
/* ... */
} while (!done);
The 'done' flag gets cleared when a reconnected command is to be processed
from the work queue. But in NCR5380.c, the flag is also used to cause the
interrupt conditions to be re-examined. Perhaps this was because
NCR5380_reselect() was expected to cause another interrupt, or perhaps
the remaining present interrupt conditions need to be handled after the
NCR5380_reselect() call?
Actually, both possibilities are bogus, as is the loop itself. It seems
have been overlooked in the hit-and-miss removal of scsi host instance
list iteration many years ago; see history/history.git commit 491447e1fcff
("[PATCH] next NCR5380 updates") and commit 69e1a9482e57 ("[PATCH] fix up
NCR5380 private data"). See also my earlier patch, "Always retry
arbitration and selection".
The datasheet says, "IRQ can be reset simply by reading the Reset
Parity/Interrupt Register". So don't treat the chip IRQ like a
level-triggered interrupt. Of the conditions that set the IRQ flag,
some are level-triggered and some are edge-triggered, which means IRQ
itself must be edge-triggered.
Some interrupt conditions are latched and some are not. Before clearing
the chip IRQ flag, clear all state that may cause it to be raised. That
means clearing the DMA Mode and Busy Monitor bits in the Mode Register
and clearing the host ID in the Select Enable register.
Also clean up some printk's and some comments. Keep atari_NCR5380.c and
NCR5380.c in agreement.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 187 +++++++++++++++++++++++--------------------
drivers/scsi/atari_NCR5380.c | 156 +++++++++++++++++------------------
drivers/scsi/dtc.c | 8 -
drivers/scsi/g_NCR5380.c | 2
4 files changed, 180 insertions(+), 173 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:49.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:50.000000000 +1100
@@ -951,85 +951,114 @@ static void NCR5380_main(struct work_str
#ifndef DONT_USE_INTR
/**
- * NCR5380_intr - generic NCR5380 irq handler
- * @irq: interrupt number
- * @dev_id: device info
- *
- * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * Locks: takes the needed instance locks
+ * NCR5380_intr - generic NCR5380 irq handler
+ * @irq: interrupt number
+ * @dev_id: device info
+ *
+ * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
+ * from the disconnected queue, and restarting NCR5380_main()
+ * as required.
+ *
+ * The chip can assert IRQ in any of six different conditions. The IRQ flag
+ * is then cleared by reading the Reset Parity/Interrupt Register (RPIR).
+ * Three of these six conditions are latched in the Bus and Status Register:
+ * - End of DMA (cleared by ending DMA Mode)
+ * - Parity error (cleared by reading RPIR)
+ * - Loss of BSY (cleared by reading RPIR)
+ * Two conditions have flag bits that are not latched:
+ * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode)
+ * - Bus reset (non-maskable)
+ * The remaining condition has no flag bit at all:
+ * - Selection/reselection
+ *
+ * Hence, establishing the cause(s) of any interrupt is partly guesswork.
+ * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor
+ * claimed that "the design of the [DP8490] interrupt logic ensures
+ * interrupts will not be lost (they can be on the DP5380)."
+ * The L5380/53C80 datasheet from LOGIC Devices has more details.
+ *
+ * Checking for bus reset by reading RST is futile because of interrupt
+ * latency, but a bus reset will reset chip logic. Checking for parity error
+ * is unnecessary because that interrupt is never enabled. A Loss of BSY
+ * condition will clear DMA Mode. We can tell when this occurs because the
+ * the Busy Monitor interrupt is enabled together with DMA Mode.
*/
-static irqreturn_t NCR5380_intr(int dummy, void *dev_id)
+static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
struct Scsi_Host *instance = dev_id;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- int done;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int handled = 0;
unsigned char basr;
unsigned long flags;
- dprintk(NDEBUG_INTR, "scsi : NCR5380 irq %d triggered\n",
- instance->irq);
+ spin_lock_irqsave(instance->host_lock, flags);
+
+ basr = NCR5380_read(BUS_AND_STATUS_REG);
+ if (basr & BASR_IRQ) {
+ unsigned char mr = NCR5380_read(MODE_REG);
+ unsigned char sr = NCR5380_read(STATUS_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ instance->host_no, irq, basr, sr, mr);
- do {
- done = 1;
- spin_lock_irqsave(instance->host_lock, flags);
- /* Look for pending interrupts */
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- /* XXX dispatch to appropriate routine if found and done=0 */
- if (basr & BASR_IRQ) {
- NCR5380_dprint(NDEBUG_INTR, instance);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
- done = 0;
- dprintk(NDEBUG_INTR, "scsi%d : SEL interrupt\n", instance->host_no);
- NCR5380_reselect(instance);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if (basr & BASR_PARITY_ERROR) {
- dprintk(NDEBUG_INTR, "scsi%d : PARITY interrupt\n", instance->host_no);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- dprintk(NDEBUG_INTR, "scsi%d : RESET interrupt\n", instance->host_no);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts
- * if we have DMA enabled, so do a sanity check based on
- * the current setting of the MODE register.
- */
+ if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
+ /* Probably End of DMA, Phase Mismatch or Loss of BSY.
+ * We ack IRQ after clearing Mode Register. Workarounds
+ * for End of DMA errata need to happen in DMA Mode.
+ */
- if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) {
- int transferred;
+ dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", intance->host_no);
- if (!hostdata->connected)
- panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno);
+ int transferred;
- transferred = (hostdata->dmalen - NCR5380_dma_residual(instance));
- hostdata->connected->SCp.this_residual -= transferred;
- hostdata->connected->SCp.ptr += transferred;
- hostdata->dmalen = 0;
-
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
- /* FIXME: we need to poll briefly then defer a workqueue task ! */
- NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2*HZ);
+ if (!hostdata->connected)
+ panic("scsi%d : DMA interrupt with no connected cmd\n",
+ instance->hostno);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- }
-#else
- dprintk(NDEBUG_INTR, "scsi : unknown interrupt, BASR 0x%X, MR 0x%X, SR 0x%x\n", basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#endif
+ transferred = hostdata->dmalen - NCR5380_dma_residual(instance);
+ hostdata->connected->SCp.this_residual -= transferred;
+ hostdata->connected->SCp.ptr += transferred;
+ hostdata->dmalen = 0;
+
+ /* FIXME: we need to poll briefly then defer a workqueue task ! */
+ NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ);
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else
+#endif /* REAL_DMA */
+ if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+ (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
+ /* Probably reselected */
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
+ instance->host_no);
+
+ if (!hostdata->connected) {
+ NCR5380_reselect(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
}
- } /* if BASR_IRQ */
- spin_unlock_irqrestore(instance->host_lock, flags);
- if(!done)
- queue_work(hostdata->work_q, &hostdata->main_task);
- } while (!done);
- return IRQ_HANDLED;
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ } else {
+ /* Probably Bus Reset */
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", instance->host_no);
+ }
+ handled = 1;
+ } else {
+ shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
+ }
+
+ spin_unlock_irqrestore(instance->host_lock, flags);
+
+ return IRQ_RETVAL(handled);
}
#endif
@@ -1218,8 +1247,9 @@ static int NCR5380_select(struct Scsi_Ho
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
}
@@ -1563,9 +1593,10 @@ static int NCR5380_transfer_dma(struct S
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
#ifdef REAL_DMA
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
#elif defined(REAL_DMA_POLL)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#else
/*
* Note : on my sample board, watch-dog timeouts occurred when interrupts
@@ -1573,13 +1604,11 @@ static int NCR5380_transfer_dma(struct S
* before the setting of DMA mode to after transfer of the last byte.
*/
- /* KLL May need eop and parity in 53c400 */
if (hostdata->flags & FLAG_NCR53C400)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
- MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
- MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
else
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
@@ -1768,16 +1797,7 @@ static int NCR5380_transfer_dma(struct S
}
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- if ((!(p & SR_IO)) && (hostdata->flags & FLAG_NCR53C400)) {
- dprintk(NDEBUG_C400_PWRITE, "53C400w: Checking for IRQ\n");
- if (NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) {
- dprintk(NDEBUG_C400_PWRITE, "53C400w: got it, reading reset interrupt reg\n");
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
- printk("53C400w: IRQ NOT THERE!\n");
- }
- }
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
*data = d + c;
*count = 0;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
@@ -2269,7 +2289,6 @@ static void NCR5380_dma_complete(NCR5380
NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ);
- NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:48.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:50.000000000 +1100
@@ -1144,12 +1144,6 @@ static void NCR5380_dma_complete(struct
int saved_data = 0, overrun = 0;
unsigned char p;
- if (!hostdata->connected) {
- printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
- "no connected cmd\n", HOSTNO);
- return;
- }
-
if (hostdata->read_overruns) {
p = hostdata->connected->SCp.phase;
if (p & SR_IO) {
@@ -1164,10 +1158,6 @@ static void NCR5380_dma_complete(struct
}
}
- dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
- HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
#if defined(CONFIG_SUN3)
if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
@@ -1186,9 +1176,9 @@ static void NCR5380_dma_complete(struct
}
#endif
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
hostdata->dma_len = 0;
@@ -1227,83 +1217,97 @@ static void NCR5380_dma_complete(struct
* Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
* from the disconnected queue, and restarting NCR5380_main()
* as required.
+ *
+ * The chip can assert IRQ in any of six different conditions. The IRQ flag
+ * is then cleared by reading the Reset Parity/Interrupt Register (RPIR).
+ * Three of these six conditions are latched in the Bus and Status Register:
+ * - End of DMA (cleared by ending DMA Mode)
+ * - Parity error (cleared by reading RPIR)
+ * - Loss of BSY (cleared by reading RPIR)
+ * Two conditions have flag bits that are not latched:
+ * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode)
+ * - Bus reset (non-maskable)
+ * The remaining condition has no flag bit at all:
+ * - Selection/reselection
+ *
+ * Hence, establishing the cause(s) of any interrupt is partly guesswork.
+ * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor
+ * claimed that "the design of the [DP8490] interrupt logic ensures
+ * interrupts will not be lost (they can be on the DP5380)."
+ * The L5380/53C80 datasheet from LOGIC Devices has more details.
+ *
+ * Checking for bus reset by reading RST is futile because of interrupt
+ * latency, but a bus reset will reset chip logic. Checking for parity error
+ * is unnecessary because that interrupt is never enabled. A Loss of BSY
+ * condition will clear DMA Mode. We can tell when this occurs because the
+ * the Busy Monitor interrupt is enabled together with DMA Mode.
*/
static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
struct Scsi_Host *instance = dev_id;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- int done = 1, handled = 0;
+ int handled = 0;
unsigned char basr;
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO);
-
- /* Look for pending interrupts */
basr = NCR5380_read(BUS_AND_STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr);
- /* dispatch to appropriate routine if found and done=0 */
if (basr & BASR_IRQ) {
- NCR5380_dprint(NDEBUG_INTR, instance);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
- done = 0;
- dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
- NCR5380_reselect(instance);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if (basr & BASR_PARITY_ERROR) {
- dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
- /*
- * The rest of the interrupt conditions can occur only during a
- * DMA transfer
- */
+ unsigned char mr = NCR5380_read(MODE_REG);
+ unsigned char sr = NCR5380_read(STATUS_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ HOSTNO, irq, basr, sr, mr);
#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts if we have
- * DMA enabled, so do a sanity check based on the current setting
- * of the MODE register.
+ if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
+ /* Probably End of DMA, Phase Mismatch or Loss of BSY.
+ * We ack IRQ after clearing Mode Register. Workarounds
+ * for End of DMA errata need to happen in DMA Mode.
*/
- if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) &&
- ((basr & BASR_END_DMA_TRANSFER) ||
- !(basr & BASR_PHASE_MATCH))) {
-
- dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
- NCR5380_dma_complete( instance );
- done = 0;
- } else
+ dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", HOSTNO);
+
+ if (hostdata->connected) {
+ NCR5380_dma_complete(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ } else {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ }
+ } else
#endif /* REAL_DMA */
- {
-/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
- if (basr & BASR_PHASE_MATCH)
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
- "BASR 0x%x, MR 0x%x, SR 0x%x\n",
- HOSTNO, basr, NCR5380_read(MODE_REG),
- NCR5380_read(STATUS_REG));
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+ (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
+ /* Probably reselected */
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
+ HOSTNO);
+
+ if (!hostdata->connected) {
+ NCR5380_reselect(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ }
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ } else {
+ /* Probably Bus Reset */
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", HOSTNO);
#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
+ dregs->csr |= CSR_DMA_ENABLE;
#endif
- }
- } /* if !(SELECTION || PARITY) */
+ }
handled = 1;
- } /* BASR & IRQ */ else {
- printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, "
- "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
- NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else {
+ shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
}
- if (!done)
- queue_work(hostdata->work_q, &hostdata->main_task);
-
return IRQ_RETVAL(handled);
}
@@ -1509,9 +1513,10 @@ static int NCR5380_select(struct Scsi_Ho
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
printk(KERN_ERR "scsi%d: reselection after won arbitration?\n",
HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return -1;
}
@@ -1871,19 +1876,14 @@ static int NCR5380_transfer_dma(struct S
/* send start chain */
sun3scsi_dma_start(c, *data);
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
if (p & SR_IO) {
- NCR5380_write(TARGET_COMMAND_REG, 1);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(INITIATOR_COMMAND_REG, 0);
- NCR5380_write(MODE_REG,
- (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
} else {
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
- NCR5380_write(MODE_REG,
- (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
NCR5380_write(START_DMA_SEND_REG, 0);
}
@@ -1912,10 +1912,8 @@ static int NCR5380_transfer_dma(struct S
c, (p & SR_IO) ? "to" : "from", d);
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
-#ifdef REAL_DMA
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
-#endif /* def REAL_DMA */
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
/* On the Medusa, it is a must to initialize the DMA before
@@ -2389,10 +2387,10 @@ static void NCR5380_information_transfer
#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
maybe_release_dma_irq(instance);
local_irq_restore(flags);
cmd->scsi_done(cmd);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
msgout = NOP;
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:49.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:50.000000000 +1100
@@ -334,8 +334,6 @@ static inline int NCR5380_pread(struct S
struct NCR5380_hostdata *hostdata = shost_priv(instance);
i = 0;
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
@@ -357,9 +355,7 @@ static inline int NCR5380_pread(struct S
rtrc(4);
while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
++i;
- NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
if (i > hostdata->spin_max_r)
hostdata->spin_max_r = i;
return (0);
@@ -383,9 +379,6 @@ static inline int NCR5380_pwrite(struct
int i;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- /* set direction (write) */
if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, 0);
else
@@ -410,7 +403,6 @@ static inline int NCR5380_pwrite(struct
++i;
rtrc(7);
/* Check for parity error here. fixme. */
- NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
if (i > hostdata->spin_max_w)
hostdata->spin_max_w = i;
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:33.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:50.000000000 +1100
@@ -594,8 +594,6 @@ static inline int NCR5380_pread(struct S
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
printk(KERN_ERR "53C400r: no end dma signal\n");
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
return 0;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (38 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 39/78] ncr5380: Standardize interrupt handling Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
` (38 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-poll_politely2 --]
[-- Type: text/plain, Size: 8940 bytes --]
SCSI bus protocol sometimes requires monitoring two related conditions
simultaneously. Enhance NCR5380_poll_politely() for this purpose, and
put it to use in the arbitration algorithm. It will also find use in
pseudo DMA.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 66 ++++++++++++++++++++++++-------------------
drivers/scsi/atari_NCR5380.c | 62 ++++++++++++++++++++++++----------------
2 files changed, 75 insertions(+), 53 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:50.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:53.000000000 +1100
@@ -457,11 +457,14 @@ static inline void initialize_SCp(struct
}
/**
- * NCR5380_poll_politely - wait for chip register value
+ * NCR5380_poll_politely2 - wait for two chip register values
* @instance: controller to poll
- * @reg: 5380 register to poll
- * @bit: Bitmask to check
- * @val: Value required to exit
+ * @reg1: 5380 register to poll
+ * @bit1: Bitmask to check
+ * @val1: Expected value
+ * @reg2: Second 5380 register to poll
+ * @bit2: Second bitmask to check
+ * @val2: Second expected value
* @wait: Time-out in jiffies
*
* Polls the chip in a reasonably efficient manner waiting for an
@@ -469,11 +472,12 @@ static inline void initialize_SCp(struct
* (if possible). In irq contexts the time-out is arbitrarily limited.
* Callers may hold locks as long as they are held in irq mode.
*
- * Returns 0 if event occurred otherwise -ETIMEDOUT.
+ * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
*/
-static int NCR5380_poll_politely(struct Scsi_Host *instance,
- int reg, int bit, int val, int wait)
+static int NCR5380_poll_politely2(struct Scsi_Host *instance,
+ int reg1, int bit1, int val1,
+ int reg2, int bit2, int val2, int wait)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long deadline = jiffies + wait;
@@ -482,9 +486,11 @@ static int NCR5380_poll_politely(struct
/* Busy-wait for up to 10 ms */
n = min(10000U, jiffies_to_usecs(wait));
n *= hostdata->accesses_per_ms;
- n /= 1000;
+ n /= 2000;
do {
- if ((NCR5380_read(reg) & bit) == val)
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
cpu_relax();
} while (n--);
@@ -495,13 +501,22 @@ static int NCR5380_poll_politely(struct
/* Repeatedly sleep for 1 ms until deadline */
while (time_is_after_jiffies(deadline)) {
schedule_timeout_uninterruptible(1);
- if ((NCR5380_read(reg) & bit) == val)
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
}
return -ETIMEDOUT;
}
+static inline int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int wait)
+{
+ return NCR5380_poll_politely2(instance, reg, bit, val,
+ reg, bit, val, wait);
+}
+
#include <linux/delay.h>
#if NDEBUG
@@ -1348,7 +1363,6 @@ static int NCR5380_select(struct Scsi_Ho
int len;
int err;
unsigned long flags;
- unsigned long timeout;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
@@ -1378,20 +1392,18 @@ static int NCR5380_select(struct Scsi_Ho
*/
local_irq_restore(flags);
- timeout = jiffies + HZ;
- while (1) {
- if (time_is_before_jiffies(timeout)) {
- NCR5380_write(MODE_REG, MR_BASE);
- shost_printk(KERN_ERR, instance,
- "select: arbitration timeout\n");
- return -1;
- }
- if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
- /* Reselection interrupt */
- return -1;
- }
- if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- break;
+ err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
+ INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
+ ICR_ARBITRATION_PROGRESS, HZ);
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ return -1;
+ }
+ if (err < 0) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
+ return -1;
}
/* The SCSI-2 arbitration delay is 2.4 us */
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:50.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:53.000000000 +1100
@@ -262,11 +262,14 @@ static inline void initialize_SCp(struct
}
/**
- * NCR5380_poll_politely - wait for chip register value
+ * NCR5380_poll_politely2 - wait for two chip register values
* @instance: controller to poll
- * @reg: 5380 register to poll
- * @bit: Bitmask to check
- * @val: Value required to exit
+ * @reg1: 5380 register to poll
+ * @bit1: Bitmask to check
+ * @val1: Expected value
+ * @reg2: Second 5380 register to poll
+ * @bit2: Second bitmask to check
+ * @val2: Second expected value
* @wait: Time-out in jiffies
*
* Polls the chip in a reasonably efficient manner waiting for an
@@ -274,11 +277,12 @@ static inline void initialize_SCp(struct
* (if possible). In irq contexts the time-out is arbitrarily limited.
* Callers may hold locks as long as they are held in irq mode.
*
- * Returns 0 if event occurred otherwise -ETIMEDOUT.
+ * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
*/
-static int NCR5380_poll_politely(struct Scsi_Host *instance,
- int reg, int bit, int val, int wait)
+static int NCR5380_poll_politely2(struct Scsi_Host *instance,
+ int reg1, int bit1, int val1,
+ int reg2, int bit2, int val2, int wait)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long deadline = jiffies + wait;
@@ -287,9 +291,11 @@ static int NCR5380_poll_politely(struct
/* Busy-wait for up to 10 ms */
n = min(10000U, jiffies_to_usecs(wait));
n *= hostdata->accesses_per_ms;
- n /= 1000;
+ n /= 2000;
do {
- if ((NCR5380_read(reg) & bit) == val)
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
cpu_relax();
} while (n--);
@@ -300,13 +306,22 @@ static int NCR5380_poll_politely(struct
/* Repeatedly sleep for 1 ms until deadline */
while (time_is_after_jiffies(deadline)) {
schedule_timeout_uninterruptible(1);
- if ((NCR5380_read(reg) & bit) == val)
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
}
return -ETIMEDOUT;
}
+static inline int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int wait)
+{
+ return NCR5380_poll_politely2(instance, reg, bit, val,
+ reg, bit, val, wait);
+}
+
static struct {
unsigned char value;
const char *name;
@@ -1101,7 +1116,6 @@ static int NCR5380_select(struct Scsi_Ho
unsigned char *data;
int len;
int err;
- unsigned long timeout;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
@@ -1125,23 +1139,19 @@ static int NCR5380_select(struct Scsi_Ho
*/
spin_unlock_irq(instance->host_lock);
- timeout = jiffies + HZ;
- while (1) {
- if (time_is_before_jiffies(timeout)) {
- NCR5380_write(MODE_REG, MR_BASE);
- shost_printk(KERN_ERR, instance,
- "select: arbitration timeout\n");
- spin_lock_irq(instance->host_lock);
- return -1;
- }
- spin_lock_irq(instance->host_lock);
- if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
- /* Reselection interrupt */
- return -1;
- }
- if (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- break;
- spin_unlock_irq(instance->host_lock);
+ err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
+ INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
+ ICR_ARBITRATION_PROGRESS, HZ);
+ spin_lock_irq(instance->host_lock);
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ return -1;
+ }
+ if (err < 0) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
+ return -1;
}
/* The SCSI-2 arbitration delay is 2.4 us */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (39 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 40/78] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
` (37 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-FLAG_NCR53C400 --]
[-- Type: text/plain, Size: 7709 bytes --]
The flags DMA_WORKS_RIGHT, FLAG_NCR53C400 and FLAG_HAS_LAST_BYTE_SENT
all mean the same thing, i.e. the chip is not a 538[01]. (More recent
devices such as the 53C80 have a 'Last Byte Sent' bit in the Target
Command Register as well as other fixes for End-of-DMA errata.)
These flags have no additional meanings since previous cleanup patches
eliminated the NCR53C400 macro, moved g_NCR5380-specific code out of the
core driver and standardized interrupt handling.
Use the FLAG_NO_DMA_FIXUP flag to suppress End-of-DMA errata workarounds,
for those cards and drivers that make use of the TCR_LAST_BYTE_SENT bit.
Remove the old flags.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 68 +++++++++++++++--------------------------------
drivers/scsi/NCR5380.h | 4 --
drivers/scsi/dtc.c | 4 --
drivers/scsi/g_NCR5380.c | 2 -
4 files changed, 25 insertions(+), 53 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:53.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:54.000000000 +1100
@@ -541,7 +541,7 @@ static void prepare_info(struct Scsi_Hos
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
- hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "",
+ hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "",
hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
@@ -702,6 +702,7 @@ static int NCR5380_init(struct Scsi_Host
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
+ hostdata->flags = flags;
INIT_WORK(&hostdata->main_task, NCR5380_main);
hostdata->work_q = alloc_workqueue("ncr5380_%d",
@@ -710,12 +711,6 @@ static int NCR5380_init(struct Scsi_Host
if (!hostdata->work_q)
return -ENOMEM;
- /* The CHECK code seems to break the 53C400. Will check it later maybe */
- if (flags & FLAG_NCR53C400)
- hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;
- else
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags;
-
hostdata->host = instance;
prepare_info(instance);
@@ -1614,7 +1609,7 @@ static int NCR5380_transfer_dma(struct S
* before the setting of DMA mode to after transfer of the last byte.
*/
- if (hostdata->flags & FLAG_NCR53C400)
+ if (hostdata->flags & FLAG_NO_DMA_FIXUP)
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
MR_ENABLE_EOP_INTR);
else
@@ -1734,14 +1729,9 @@ static int NCR5380_transfer_dma(struct S
return 0;
#else /* defined(REAL_DMA_POLL) */
if (p & SR_IO) {
-#ifdef DMA_WORKS_RIGHT
- foo = NCR5380_pread(instance, d, c);
-#else
- int diff = 1;
- if (hostdata->flags & FLAG_NCR53C400) {
- diff = 0;
- }
- if (!(foo = NCR5380_pread(instance, d, c - diff))) {
+ foo = NCR5380_pread(instance, d,
+ hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
+ if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
* We can't disable DMA mode after successfully transferring
* what we plan to be the last byte, since that would open up
@@ -1764,46 +1754,32 @@ static int NCR5380_transfer_dma(struct S
* byte.
*/
- if (!(hostdata->flags & FLAG_NCR53C400)) {
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ));
- /* Wait for clean handshake */
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- d[c - 1] = NCR5380_read(INPUT_DATA_REG);
+ if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+ BASR_DRQ, BASR_DRQ, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
+ }
+ if (NCR5380_poll_politely(instance, STATUS_REG,
+ SR_REQ, 0, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
}
+ d[c - 1] = NCR5380_read(INPUT_DATA_REG);
}
-#endif
} else {
-#ifdef DMA_WORKS_RIGHT
foo = NCR5380_pwrite(instance, d, c);
-#else
- int timeout;
- dprintk(NDEBUG_C400_PWRITE, "About to pwrite %d bytes\n", c);
- if (!(foo = NCR5380_pwrite(instance, d, c))) {
+ if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
* Wait for the last byte to be sent. If REQ is being asserted for
* the byte we're interested, we'll ACK it and it will go false.
*/
- if (!(hostdata->flags & FLAG_HAS_LAST_BYTE_SENT)) {
- timeout = 20000;
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH));
-
- if (!timeout)
- dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : timed out on last byte\n", instance->host_no);
-
- if (hostdata->flags & FLAG_CHECK_LAST_BYTE_SENT) {
- hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT;
- if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) {
- hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT;
- dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : last byte sent works\n", instance->host_no);
- }
- }
- } else {
- dprintk(NDEBUG_C400_PWRITE, "Waiting for LASTBYTE\n");
- while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT));
- dprintk(NDEBUG_C400_PWRITE, "Got LASTBYTE\n");
+ if (NCR5380_poll_politely2(instance,
+ BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
+ BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n");
}
}
-#endif
}
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:48.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:03:54.000000000 +1100
@@ -226,9 +226,7 @@
#define NO_IRQ 0
#endif
-#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
-#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
-#define FLAG_NCR53C400 4 /* NCR53c400 */
+#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
#define FLAG_DTC3181E 16 /* DTC3181E */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:50.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:03:54.000000000 +1100
@@ -1,7 +1,5 @@
#define PSEUDO_DMA
#define DONT_USE_INTR
-#define DMA_WORKS_RIGHT
-
/*
* DTC 3180/3280 driver, by
@@ -233,7 +231,7 @@ found:
instance->base = addr;
((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
- if (NCR5380_init(instance, 0))
+ if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
goto out_unregister;
NCR5380_maybe_reset_bus(instance);
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:50.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:54.000000000 +1100
@@ -321,7 +321,7 @@ static int __init generic_NCR5380_detect
break;
case BOARD_NCR53C400:
#ifdef PSEUDO_DMA
- flags = FLAG_NCR53C400;
+ flags = FLAG_NO_DMA_FIXUP;
#endif
break;
case BOARD_NCR53C400A:
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (40 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 41/78] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 43/78] ncr5380: Standardize reselection handling Finn Thain
` (36 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-READ_OVERRUNS --]
[-- Type: text/plain, Size: 3083 bytes --]
The workarounds for chip errata appear twice, in slightly different
forms. One is used when defined(REAL_DMA) || defined(REAL_DMA_POLL), the
other when defined(PSEUDO_DMA). In the PDMA case, the workarounds have
been made conditional on FLAG_NO_DMA_FIXUPS. Do the same for the DMA case,
to eliminate the READ_OVERRUNS macro.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:54.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:56.000000000 +1100
@@ -94,11 +94,6 @@
#undef REAL_DMA
#endif
-#ifdef REAL_DMA_POLL
-#undef READ_OVERRUNS
-#define READ_OVERRUNS
-#endif
-
#ifdef BOARD_REQUIRES_NO_DELAY
#define io_recovery_delay(x)
#else
@@ -1586,11 +1581,10 @@ static int NCR5380_transfer_dma(struct S
return -1;
}
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
-#ifdef READ_OVERRUNS
if (p & SR_IO) {
- c -= 2;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
+ c -= 2;
}
-#endif
dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d);
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
#endif
@@ -1676,13 +1670,14 @@ static int NCR5380_transfer_dma(struct S
*/
if (p & SR_IO) {
-#ifdef READ_OVERRUNS
- udelay(10);
- if (((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == (BASR_PHASE_MATCH | BASR_ACK))) {
- saved_data = NCR5380_read(INPUT_DATA_REGISTER);
- overrun = 1;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) {
+ udelay(10);
+ if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ saved_data = NCR5380_read(INPUT_DATA_REGISTER);
+ overrun = 1;
+ }
}
-#endif
} else {
int limit = 100;
while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) {
@@ -1704,8 +1699,8 @@ static int NCR5380_transfer_dma(struct S
*data += c;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-#ifdef READ_OVERRUNS
- if (*phase == p && (p & SR_IO) && residue == 0) {
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) &&
+ *phase == p && (p & SR_IO) && residue == 0) {
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
**data = saved_data;
@@ -1720,7 +1715,6 @@ static int NCR5380_transfer_dma(struct S
NCR5380_transfer_pio(instance, phase, &cnt, data);
*count -= toPIO - cnt;
}
-#endif
dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count));
return 0;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 43/78] ncr5380: Standardize reselection handling
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (41 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 42/78] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
` (35 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-standardize-reselection-handling --]
[-- Type: text/plain, Size: 10724 bytes --]
Bring the two NCR5380_reselect() implementations into agreement.
Replace infinite loops in atari_NCR5380.c with timeouts, as per NCR5380.c.
Remove 'abort' flag in NCR5380.c as per atari_NCR5380.c -- if reselection
fails, there may be no MESSAGE IN phase so don't attempt data transfer.
During selection, don't interfere with the chip registers after a
reselection interrupt intervenes.
Clean up some trivial issues with code style, comments and printk.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 115 +++++++++++++++++++++++--------------------
drivers/scsi/atari_NCR5380.c | 50 ++++++++++--------
2 files changed, 93 insertions(+), 72 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:56.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:57.000000000 +1100
@@ -1182,6 +1182,10 @@ static int NCR5380_select(struct Scsi_Ho
else
udelay(2);
+ /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
+ return -1;
+
dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
/*
@@ -1953,12 +1957,14 @@ static void NCR5380_information_transfer
cmd->scsi_done(cmd);
}
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
+
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
@@ -2144,7 +2150,6 @@ static void NCR5380_reselect(struct Scsi
unsigned char msg[3];
unsigned char *data;
struct scsi_cmnd *tmp = NULL, *prev;
- int abort = 0;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2154,7 +2159,7 @@ static void NCR5380_reselect(struct Scsi
NCR5380_write(MODE_REG, MR_BASE);
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no);
+ dprintk(NDEBUG_RESELECTION, "scsi%d : reselect\n", instance->host_no);
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2166,77 +2171,85 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- /* FIXME: timeout too long, must fail to workqueue */
- if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0)
- abort = 1;
-
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return;
+ }
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
* Wait for target to go into MSGIN.
- * FIXME: timeout needed and fail to work queeu
*/
if (NCR5380_poll_politely(instance,
- STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0)
- abort = 1;
+ STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ do_abort(instance);
+ return;
+ }
len = 1;
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+ if (len) {
+ do_abort(instance);
+ return;
+ }
+
if (!(msg[0] & 0x80)) {
- printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
+ shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
spi_print_msg(msg);
- abort = 1;
- } else {
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- lun = (msg[0] & 0x07);
-
- /*
- * We need to add code for SCSI-II to track which devices have
- * I_T_L_Q nexuses established, and which have simple I_T_L
- * nexuses so we can chose to do additional data transfer.
- */
+ printk("\n");
+ do_abort(instance);
+ return;
+ }
+ lun = msg[0] & 0x07;
- /*
- * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
- * just reestablished, and remove it from the disconnected queue.
- */
+ /*
+ * We need to add code for SCSI-II to track which devices have
+ * I_T_L_Q nexuses established, and which have simple I_T_L
+ * nexuses so we can chose to do additional data transfer.
+ */
+ /*
+ * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
+ * just reestablished, and remove it from the disconnected queue.
+ */
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
- ) {
- if (prev) {
- REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
- prev->host_scribble = tmp->host_scribble;
- } else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
- hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
- break;
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
+ tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) {
+ if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)) {
+ if (prev) {
+ REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
+ prev->host_scribble = tmp->host_scribble;
+ } else {
+ REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
+ hostdata->disconnected_queue =
+ (struct scsi_cmnd *) tmp->host_scribble;
}
- if (!tmp) {
- printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun);
- /*
- * Since we have an established nexus that we can't do anything with,
- * we must abort it.
- */
- abort = 1;
+ tmp->host_scribble = NULL;
+ break;
}
}
-
- if (abort) {
+ if (!tmp) {
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+ target_mask, lun);
+ /*
+ * Since we have an established nexus that we can't do anything with,
+ * we must abort it.
+ */
do_abort(instance);
- } else {
- hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
+ return;
}
+
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ hostdata->connected = tmp;
+ dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n",
+ instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
}
/*
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:53.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:57.000000000 +1100
@@ -1446,11 +1446,9 @@ static int NCR5380_select(struct Scsi_Ho
else
udelay(2);
- if (hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
return -1;
- }
dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
@@ -2223,13 +2221,15 @@ static void NCR5380_information_transfer
cmd->scsi_done(cmd);
}
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+
/* ++roman: For Falcon SCSI, release the lock on the
* ST-DMA here if no other commands are waiting on the
* disconnected queue.
@@ -2482,17 +2482,22 @@ static void NCR5380_reselect(struct Scsi
*/
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- while (NCR5380_read(STATUS_REG) & SR_SEL)
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return;
+ }
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
* Wait for target to go into MSGIN.
*/
- while (!(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ do_abort(instance);
+ return;
+ }
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
/* acknowledge toggle to MSGIN */
@@ -2505,15 +2510,21 @@ static void NCR5380_reselect(struct Scsi
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+
+ if (len) {
+ do_abort(instance);
+ return;
+ }
#endif
if (!(msg[0] & 0x80)) {
- printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
+ shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
spi_print_msg(msg);
+ printk("\n");
do_abort(instance);
return;
}
- lun = (msg[0] & 0x07);
+ lun = msg[0] & 0x07;
#if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
/* If the phase is still MSGIN, the target wants to send some more
@@ -2541,7 +2552,7 @@ static void NCR5380_reselect(struct Scsi
for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
tmp; prev = tmp, tmp = NEXT(tmp)) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
+ if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
#ifdef SUPPORT_TAGS
&& (tag == tmp->tag)
#endif
@@ -2559,16 +2570,13 @@ static void NCR5380_reselect(struct Scsi
}
if (!tmp) {
- printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
#ifdef SUPPORT_TAGS
- "tag %d "
-#endif
- "not in disconnected_queue.\n",
- HOSTNO, target_mask, lun
-#ifdef SUPPORT_TAGS
- , tag
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n",
+ target_mask, lun, tag);
+#else
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+ target_mask, lun);
#endif
- );
/*
* Since we have an established nexus that we can't do anything
* with, we must abort it.
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (42 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 43/78] ncr5380: Standardize reselection handling Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 45/78] ncr5380: Cleanup #include directives Finn Thain
` (34 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-extended-message-length --]
[-- Type: text/plain, Size: 1946 bytes --]
Fix the array bounds check when transferring an extended message from the
target.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 3 ++-
drivers/scsi/atari_NCR5380.c | 4 ++--
2 files changed, 4 insertions(+), 3 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:57.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:03:59.000000000 +1100
@@ -2039,7 +2039,8 @@ static void NCR5380_information_transfer
dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]);
- if (!len && extended_msg[1] <= (sizeof(extended_msg) - 1)) {
+ if (!len && extended_msg[1] > 0 &&
+ extended_msg[1] <= sizeof(extended_msg) - 2) {
/* Accept third byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = extended_msg[1] - 1;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:57.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:59.000000000 +1100
@@ -2330,8 +2330,8 @@ static void NCR5380_information_transfer
dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
(int)extended_msg[1], (int)extended_msg[2]);
- if (!len && extended_msg[1] <=
- (sizeof(extended_msg) - 1)) {
+ if (!len && extended_msg[1] > 0 &&
+ extended_msg[1] <= sizeof(extended_msg) - 2) {
/* Accept third byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = extended_msg[1] - 1;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 45/78] ncr5380: Cleanup #include directives
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (43 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 44/78] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
` (33 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-move-core-driver-includes --]
[-- Type: text/plain, Size: 7669 bytes --]
Remove unused includes (stat.h, signal.h, proc_fs.h) and move includes
needed by the core drivers into the common header (delay.h etc).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 2 --
drivers/scsi/NCR5380.h | 4 ++++
drivers/scsi/arm/cumana_1.c | 4 ----
drivers/scsi/arm/oak.c | 2 --
drivers/scsi/atari_NCR5380.c | 5 -----
drivers/scsi/atari_scsi.c | 1 -
drivers/scsi/dmx3191d.c | 5 -----
drivers/scsi/dtc.c | 4 +---
drivers/scsi/g_NCR5380.c | 6 ++----
drivers/scsi/mac_scsi.c | 1 -
drivers/scsi/pas16.c | 4 ----
drivers/scsi/t128.c | 3 ---
12 files changed, 7 insertions(+), 34 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:03:59.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:00.000000000 +1100
@@ -79,8 +79,6 @@
* 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
*/
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:03:54.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:00.000000000 +1100
@@ -22,8 +22,12 @@
#ifndef NCR5380_H
#define NCR5380_H
+#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_spi.h>
#define NDEBUG_ARBITRATION 0x1
#define NDEBUG_AUTOSENSE 0x2
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:04:00.000000000 +1100
@@ -4,9 +4,7 @@
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
@@ -15,8 +13,6 @@
#include <scsi/scsi_host.h>
-#include <scsi/scsicam.h>
-
#define PSEUDO_DMA
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:04:00.000000000 +1100
@@ -5,9 +5,7 @@
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:03:59.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:00.000000000 +1100
@@ -68,9 +68,6 @@
/* Adapted for the sun3 by Sam Creasey. */
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
-
#if (NDEBUG & NDEBUG_LISTS)
#define LIST(x, y) \
do { \
@@ -517,8 +514,6 @@ static inline int NCR5380_poll_politely(
reg, bit, val, wait);
}
-#include <linux/delay.h>
-
#if NDEBUG
static struct {
unsigned char mask;
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:00.000000000 +1100
@@ -66,7 +66,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:04:00.000000000 +1100
@@ -41,11 +41,6 @@
#define NCR5380_implementation_fields /* none */
-/*
- * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
- */
-#include <linux/delay.h>
-
#include "NCR5380.h"
#include "NCR5380.c"
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:03:54.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:04:00.000000000 +1100
@@ -46,15 +46,13 @@
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <scsi/scsi_host.h>
+
#include "dtc.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:03:54.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:00.000000000 +1100
@@ -63,16 +63,14 @@
#endif
#include <asm/io.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <scsi/scsi_host.h>
#include "g_NCR5380.h"
#include "NCR5380.h"
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/isapnp.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
static int ncr_irq;
@@ -732,7 +730,7 @@ static struct scsi_host_template driver_
.cmd_per_lun = CMD_PER_LUN,
.use_clustering = DISABLE_CLUSTERING,
};
-#include <linux/module.h>
+
#include "scsi_module.c"
module_param(ncr_irq, int, 0);
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:04:00.000000000 +1100
@@ -12,7 +12,6 @@
*/
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:03:49.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:04:00.000000000 +1100
@@ -69,14 +69,10 @@
#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/proc_fs.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <scsi/scsi_host.h>
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:04:00.000000000 +1100
@@ -68,14 +68,11 @@
* 15 9-11
*/
-#include <linux/signal.h>
#include <linux/io.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include "t128.h"
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (44 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 45/78] ncr5380: Cleanup #include directives Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
` (32 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-fix-NDEBUG_NO_DATAOUT --]
[-- Type: text/plain, Size: 1145 bytes --]
NDEBUG_NO_DATAOUT should not disable DATA IN phases too. Fix this.
(This bug has long been fixed in atari_NCR5380.c.)
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/NCR5380.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:02.000000000 +1100
@@ -1838,7 +1838,6 @@ static void NCR5380_information_transfer
continue;
}
switch (phase) {
- case PHASE_DATAIN:
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
printk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n", instance->host_no);
@@ -1848,6 +1847,7 @@ static void NCR5380_information_transfer
cmd->scsi_done(cmd);
return;
#endif
+ case PHASE_DATAIN:
/*
* If there is no room left in the current buffer in the
* scatter-gather list, move onto the next one.
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (45 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 46/78] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit Finn Thain
` (31 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-cleanup-scsi_host_template-initializers --]
[-- Type: text/plain, Size: 12638 bytes --]
Add missing .module initializer. Use distinct .proc_name values for the
g_NCR5380 and g_NCR5380_mmio modules. Remove pointless CAN_QUEUE and
CMD_PER_LUN override macros. Cleanup whitespace and code style.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/atari_scsi.c | 2 +-
drivers/scsi/dmx3191d.c | 1 +
drivers/scsi/dtc.c | 32 ++++++++++++++++----------------
drivers/scsi/dtc.h | 8 --------
drivers/scsi/g_NCR5380.c | 26 +++++++++++++-------------
drivers/scsi/g_NCR5380.h | 10 ++--------
drivers/scsi/mac_scsi.c | 28 ++++++++++++++--------------
drivers/scsi/pas16.c | 32 ++++++++++++++++----------------
drivers/scsi/pas16.h | 8 --------
drivers/scsi/sun3_scsi.c | 6 +++---
drivers/scsi/t128.c | 32 ++++++++++++++++----------------
drivers/scsi/t128.h | 8 --------
12 files changed, 82 insertions(+), 111 deletions(-)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:04:03.000000000 +1100
@@ -49,6 +49,7 @@
static struct scsi_host_template dmx3191d_driver_template = {
+ .module = THIS_MODULE,
.proc_name = DMX3191D_DRIVER_NAME,
.name = "Domex DMX3191D",
.info = NCR5380_info,
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:04:03.000000000 +1100
@@ -436,21 +436,21 @@ static int dtc_release(struct Scsi_Host
}
static struct scsi_host_template driver_template = {
- .name = "DTC 3180/3280 ",
- .detect = dtc_detect,
- .release = dtc_release,
- .proc_name = "dtc3x80",
- .show_info = dtc_show_info,
- .write_info = dtc_write_info,
- .info = dtc_info,
- .queuecommand = dtc_queue_command,
- .eh_abort_handler = dtc_abort,
- .eh_bus_reset_handler = dtc_bus_reset,
- .bios_param = dtc_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "DTC 3180/3280",
+ .detect = dtc_detect,
+ .release = dtc_release,
+ .proc_name = "dtc3x80",
+ .show_info = dtc_show_info,
+ .write_info = dtc_write_info,
+ .info = dtc_info,
+ .queuecommand = dtc_queue_command,
+ .eh_abort_handler = dtc_abort,
+ .eh_bus_reset_handler = dtc_bus_reset,
+ .bios_param = dtc_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2016-01-03 16:04:03.000000000 +1100
@@ -10,14 +10,6 @@
#ifndef DTC3280_H
#define DTC3280_H
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
#define NCR5380_implementation_fields \
void __iomem *base
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:03.000000000 +1100
@@ -305,7 +305,6 @@ static int __init generic_NCR5380_detect
}
}
#endif
- tpnt->proc_name = "g_NCR5380";
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
if (!(overrides[current_override].NCR5380_map_name))
@@ -715,20 +714,21 @@ static int generic_NCR5380_dma_xfer_len(
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
- .show_info = generic_NCR5380_show_info,
- .name = "Generic NCR5380/NCR53C400 SCSI",
- .detect = generic_NCR5380_detect,
- .release = generic_NCR5380_release_resources,
- .info = generic_NCR5380_info,
- .queuecommand = generic_NCR5380_queue_command,
+ .proc_name = DRV_MODULE_NAME,
+ .show_info = generic_NCR5380_show_info,
+ .name = "Generic NCR5380/NCR53C400 SCSI",
+ .detect = generic_NCR5380_detect,
+ .release = generic_NCR5380_release_resources,
+ .info = generic_NCR5380_info,
+ .queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
.eh_bus_reset_handler = generic_NCR5380_bus_reset,
- .bios_param = NCR5380_BIOSPARAM,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .bios_param = NCR5380_BIOSPARAM,
+ .can_queue = 16,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:03.000000000 +1100
@@ -21,18 +21,11 @@
#define NCR5380_BIOSPARAM NULL
#endif
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
#ifndef SCSI_G_NCR5380_MEM
+#define DRV_MODULE_NAME "g_NCR5380"
#define NCR5380_map_type int
#define NCR5380_map_name port
@@ -53,6 +46,7 @@
#else
/* therefore SCSI_G_NCR5380_MEM */
+#define DRV_MODULE_NAME "g_NCR5380_mmio"
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:04:03.000000000 +1100
@@ -309,20 +309,20 @@ static int macscsi_pwrite(struct Scsi_Ho
#define PFX DRV_MODULE_NAME ": "
static struct scsi_host_template mac_scsi_template = {
- .module = THIS_MODULE,
- .proc_name = DRV_MODULE_NAME,
- .show_info = macscsi_show_info,
- .write_info = macscsi_write_info,
- .name = "Macintosh NCR5380 SCSI",
- .info = macscsi_info,
- .queuecommand = macscsi_queue_command,
- .eh_abort_handler = macscsi_abort,
- .eh_bus_reset_handler = macscsi_bus_reset,
- .can_queue = 16,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 2,
- .use_clustering = DISABLE_CLUSTERING
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
+ .show_info = macscsi_show_info,
+ .write_info = macscsi_write_info,
+ .name = "Macintosh NCR5380 SCSI",
+ .info = macscsi_info,
+ .queuecommand = macscsi_queue_command,
+ .eh_abort_handler = macscsi_abort,
+ .eh_bus_reset_handler = macscsi_bus_reset,
+ .can_queue = 16,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
static int __init mac_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:04:03.000000000 +1100
@@ -546,22 +546,22 @@ static int pas16_release(struct Scsi_Hos
}
static struct scsi_host_template driver_template = {
- .name = "Pro Audio Spectrum-16 SCSI",
- .detect = pas16_detect,
- .release = pas16_release,
- .proc_name = "pas16",
- .show_info = pas16_show_info,
- .write_info = pas16_write_info,
- .info = pas16_info,
- .queuecommand = pas16_queue_command,
- .eh_abort_handler = pas16_abort,
- .eh_bus_reset_handler = pas16_bus_reset,
- .bios_param = pas16_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "Pro Audio Spectrum-16 SCSI",
+ .detect = pas16_detect,
+ .release = pas16_release,
+ .proc_name = "pas16",
+ .show_info = pas16_show_info,
+ .write_info = pas16_write_info,
+ .info = pas16_info,
+ .queuecommand = pas16_queue_command,
+ .eh_abort_handler = pas16_abort,
+ .eh_bus_reset_handler = pas16_bus_reset,
+ .bios_param = pas16_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2016-01-03 16:04:03.000000000 +1100
@@ -95,14 +95,6 @@
#define OPERATION_MODE_1 0xec03
#define IO_CONFIG_3 0xf002
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
#define NCR5380_implementation_fields /* none */
#define PAS16_io_port(reg) (instance->io_port + pas16_offset[(reg)])
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:03:23.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:03.000000000 +1100
@@ -463,13 +463,13 @@ static struct scsi_host_template sun3_sc
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
- .eh_abort_handler = sun3scsi_abort,
- .eh_bus_reset_handler = sun3scsi_bus_reset,
+ .eh_abort_handler = sun3scsi_abort,
+ .eh_bus_reset_handler = sun3scsi_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_NONE,
.cmd_per_lun = 2,
- .use_clustering = DISABLE_CLUSTERING
+ .use_clustering = DISABLE_CLUSTERING,
};
static int __init sun3_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:04:03.000000000 +1100
@@ -390,21 +390,21 @@ MODULE_LICENSE("GPL");
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
- .name = "Trantor T128/T128F/T228",
- .detect = t128_detect,
- .release = t128_release,
- .proc_name = "t128",
- .show_info = t128_show_info,
- .write_info = t128_write_info,
- .info = t128_info,
- .queuecommand = t128_queue_command,
- .eh_abort_handler = t128_abort,
- .eh_bus_reset_handler = t128_bus_reset,
- .bios_param = t128_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "Trantor T128/T128F/T228",
+ .detect = t128_detect,
+ .release = t128_release,
+ .proc_name = "t128",
+ .show_info = t128_show_info,
+ .write_info = t128_write_info,
+ .info = t128_info,
+ .queuecommand = t128_queue_command,
+ .eh_abort_handler = t128_abort,
+ .eh_bus_reset_handler = t128_bus_reset,
+ .bios_param = t128_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2016-01-03 16:03:31.000000000 +1100
+++ linux/drivers/scsi/t128.h 2016-01-03 16:04:03.000000000 +1100
@@ -67,14 +67,6 @@
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
#define NCR5380_implementation_fields \
void __iomem *base
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:03.000000000 +1100
@@ -781,7 +781,7 @@ static struct scsi_host_template atari_s
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
- .use_clustering = DISABLE_CLUSTERING
+ .use_clustering = DISABLE_CLUSTERING,
};
static int __init atari_scsi_probe(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (46 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 47/78] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
` (30 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-fix-queue_size-limit --]
[-- Type: text/plain, Size: 2463 bytes --]
When a target reports a QUEUE_FULL condition it causes the driver to
update the 'queue_size' limit with the number of currently allocated tags.
At least, that's what's supposed to happen, according to the comments.
Unfortunately the terms in the assignment are swapped. Fix this and
cleanup some obsolete comments.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/atari_NCR5380.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:07.000000000 +1100
@@ -229,9 +229,7 @@ static void do_reset(struct Scsi_Host *)
* cannot know it in advance :-( We just see a QUEUE_FULL status being
* returned. So, in this case, the driver internal queue size assumption is
* reduced to the number of active tags if QUEUE_FULL is returned by the
- * target. The command is returned to the mid-level, but with status changed
- * to BUSY, since --as I've seen-- the mid-level can't handle QUEUE_FULL
- * correctly.
+ * target.
*
* We're also not allowed running tagged commands as long as an untagged
* command is active. And REQUEST SENSE commands after a contingent allegiance
@@ -2152,21 +2150,13 @@ static void NCR5380_information_transfer
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- /* Turn a QUEUE FULL status into BUSY, I think the
- * mid level cannot handle QUEUE FULL :-( (The
- * command is retried after BUSY). Also update our
- * queue size to the number of currently issued
- * commands now.
- */
- /* ++Andreas: the mid level code knows about
- QUEUE_FULL now. */
struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
"QUEUE_FULL after %d commands\n",
HOSTNO, cmd->device->id, cmd->device->lun,
ta->nr_allocated);
if (ta->queue_size > ta->nr_allocated)
- ta->nr_allocated = ta->queue_size;
+ ta->queue_size = ta->nr_allocated;
}
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (47 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 48/78] atari_NCR5380: Fix queue_size limit Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
` (29 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-eliminate-redundant-ICR_ARBITRATION_LOST-test --]
[-- Type: text/plain, Size: 5687 bytes --]
Remove FLAG_DTC3181E. It was used to suppress a final Arbitration Lost
(SEL asserted) test that isn't actually needed. The test was suppressed
because it causes problems for DTC436 and DTC536 chips. It takes place
after the host wins arbitration, so SEL has been asserted. These chips
can't seem to tell whether it was the host or another bus device that
did so.
This questionable final test appears in a flow chart in an early NCR5380
datasheet. It was removed from later documents like the DP5380 datasheet.
By the time this final test takes place, the driver has already tested
the Arbitration Lost bit several times. The first test happens 3 us after
BUS FREE (or longer due to register access delays). The protocol requires
that a device stop signalling within 1.8 us after BUS FREE unless it won
arbitration, in which case it must assert SEL, which is detected 1.2 us
later by the first Arbitration Lost test.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 14 +-------------
drivers/scsi/NCR5380.h | 1 -
drivers/scsi/atari_NCR5380.c | 9 ---------
drivers/scsi/dmx3191d.c | 2 +-
drivers/scsi/g_NCR5380.c | 2 +-
5 files changed, 3 insertions(+), 25 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:02.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:08.000000000 +1100
@@ -528,14 +528,13 @@ static void prepare_info(struct Scsi_Hos
"base 0x%lx, irq %d, "
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
- "flags { %s%s%s%s}, "
+ "flags { %s%s%s}, "
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "",
- hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#ifdef AUTOPROBE_IRQ
@@ -1159,17 +1158,6 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
- if (!(hostdata->flags & FLAG_DTC3181E) &&
- /* RvC: DTC3181E has some trouble with this
- * so we simply removed it. Seems to work with
- * only Mustek scanner attached
- */
- (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no);
- return -1;
- }
/*
* Again, bus clear + bus settle time is 1.2us, however, this is
* a minimum so we'll udelay ceil(1.2)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:08.000000000 +1100
@@ -232,7 +232,6 @@
#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
-#define FLAG_DTC3181E 16 /* DTC3181E */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:07.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:08.000000000 +1100
@@ -1420,15 +1420,6 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
- HOSTNO);
- return -1;
- }
-
/*
* Again, bus clear + bus settle time is 1.2us, however, this is
* a minimum so we'll udelay ceil(1.2)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:04:08.000000000 +1100
@@ -91,7 +91,7 @@ static int dmx3191d_probe_one(struct pci
*/
shost->irq = NO_IRQ;
- error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA);
if (error)
goto out_host_put;
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:08.000000000 +1100
@@ -326,7 +326,7 @@ static int __init generic_NCR5380_detect
ports = ncr_53c400a_ports;
break;
case BOARD_DTC3181E:
- flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
+ flags = FLAG_NO_PSEUDO_DMA;
ports = dtc_3181e_ports;
break;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (48 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 49/78] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 51/78] ncr5380: Remove command list debug code Finn Thain
` (28 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-adopt-new-spin-lock --]
[-- Type: text/plain, Size: 34253 bytes --]
NCR5380.c presently uses the instance->host_lock spin lock. Convert this
to a new spin lock that protects the NCR5380_hostdata struct.
atari_NCR5380.c previously used local_irq_save/restore() rather than a
spin lock. Convert this to hostdata->lock in irq mode. For SMP platforms,
the interrupt handler now also acquires the spin lock.
This brings all locking in the two core drivers into agreement.
Adding this locking also means that a bunch of volatile qualifiers can be
removed from the members of the NCR5380_hostdata struct. This is done in
a subsequent patch.
Proper locking will allow the abort handler to locate a command being
aborted. This is presently impossible if the abort handler is invoked when
the command has been moved from a queue to a pointer on the stack. (If
eh_abort_handler can't determine whether a command has been completed
or is still being processed then it can't decide whether to return
success or failure.)
The hostdata spin lock is now held when calling NCR5380_select() and
NCR5380_information_transfer(). Where possible, the lock is dropped for
polling and PIO transfers.
Clean up the now-redundant SELECT_ENABLE_REG writes, that used to provide
limited mutual exclusion between information_transfer() and reselect().
Accessing hostdata->connected without data races means taking the lock;
cleanup these accesses.
The new spin lock falls away for m68k and other UP builds, so this should
have little impact there. In the SMP case the new lock should be
uncontested even when the SCSI bus is contested.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 82 ++++++++++++++++----------
drivers/scsi/NCR5380.h | 1
drivers/scsi/atari_NCR5380.c | 135 +++++++++++++++++--------------------------
3 files changed, 109 insertions(+), 109 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:09.000000000 +1100
@@ -256,6 +256,7 @@ struct NCR5380_hostdata {
volatile struct scsi_cmnd *connected; /* currently connected command */
volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
+ spinlock_t lock; /* protects this struct */
int flags;
struct scsi_eh_save ses;
char info[256];
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:09.000000000 +1100
@@ -546,15 +546,13 @@ static struct {
static void NCR5380_print(struct Scsi_Host *instance)
{
unsigned char status, data, basr, mr, icr, i;
- unsigned long flags;
- local_irq_save(flags);
data = NCR5380_read(CURRENT_SCSI_DATA_REG);
status = NCR5380_read(STATUS_REG);
mr = NCR5380_read(MODE_REG);
icr = NCR5380_read(INITIATOR_COMMAND_REG);
basr = NCR5380_read(BUS_AND_STATUS_REG);
- local_irq_restore(flags);
+
printk("STATUS_REG: %02x ", status);
for (i = 0; signals[i].mask; ++i)
if (status & signals[i].mask)
@@ -684,14 +682,12 @@ static void __maybe_unused NCR5380_print
{
struct NCR5380_hostdata *hostdata;
struct scsi_cmnd *ptr;
- unsigned long flags;
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- local_irq_save(flags);
if (!hostdata->connected)
printk("scsi%d: no currently connected command\n", HOSTNO);
else
@@ -704,8 +700,6 @@ static void __maybe_unused NCR5380_print
for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
ptr = NEXT(ptr))
lprint_Scsi_Cmnd(ptr);
-
- local_irq_restore(flags);
printk("\n");
}
@@ -732,7 +726,7 @@ static int __maybe_unused NCR5380_show_i
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- local_irq_save(flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
if (!hostdata->connected)
seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
else
@@ -746,7 +740,7 @@ static int __maybe_unused NCR5380_show_i
ptr = NEXT(ptr))
show_Scsi_Cmnd(ptr, m);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return 0;
}
@@ -784,6 +778,7 @@ static int __init NCR5380_init(struct Sc
#if defined (REAL_DMA)
hostdata->dma_len = 0;
#endif
+ spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -946,7 +941,7 @@ static int NCR5380_queue_command(struct
if (!NCR5380_acquire_dma_irq(instance))
return SCSI_MLQUEUE_HOST_BUSY;
- local_irq_save(flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
/*
* Insert the cmd into the issue queue. Note that REQUEST SENSE
@@ -966,7 +961,7 @@ static int NCR5380_queue_command(struct
LIST(cmd, tmp);
SET_NEXT(tmp, cmd);
}
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
(cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
@@ -1006,7 +1001,6 @@ static void NCR5380_main(struct work_str
struct Scsi_Host *instance = hostdata->host;
struct scsi_cmnd *tmp, *prev;
int done;
- unsigned long flags;
/*
* ++roman: Just disabling the NCR interrupt isn't sufficient here,
@@ -1014,9 +1008,8 @@ static void NCR5380_main(struct work_str
* alter queues and touch the Falcon lock.
*/
- local_save_flags(flags);
+ spin_lock_irq(&hostdata->lock);
do {
- local_irq_disable(); /* Freeze request queues */
done = 1;
if (!hostdata->connected) {
@@ -1043,7 +1036,6 @@ static void NCR5380_main(struct work_str
tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
lun);
/* When we find one, remove it from the issue queue. */
- /* ++guenther: possible race with Falcon locking */
if (
#ifdef SUPPORT_TAGS
!is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
@@ -1051,8 +1043,6 @@ static void NCR5380_main(struct work_str
!(hostdata->busy[tmp->device->id] & (1 << lun))
#endif
) {
- /* ++guenther: just to be sure, this must be atomic */
- local_irq_disable();
if (prev) {
REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
SET_NEXT(prev, NEXT(tmp));
@@ -1063,9 +1053,6 @@ static void NCR5380_main(struct work_str
SET_NEXT(tmp, NULL);
hostdata->retain_dma_intr++;
- /* reenable interrupts after finding one */
- local_irq_restore(flags);
-
/*
* Attempt to establish an I_T_L nexus here.
* On success, instance->hostdata->connected is set.
@@ -1090,13 +1077,10 @@ static void NCR5380_main(struct work_str
#endif
if (!NCR5380_select(instance, tmp)) {
/* OK or bad target */
- local_irq_disable();
hostdata->retain_dma_intr--;
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
} else {
/* Need to retry */
- local_irq_disable();
LIST(tmp, hostdata->issue_queue);
SET_NEXT(tmp, hostdata->issue_queue);
hostdata->issue_queue = tmp;
@@ -1104,7 +1088,6 @@ static void NCR5380_main(struct work_str
cmd_free_tag(tmp);
#endif
hostdata->retain_dma_intr--;
- local_irq_restore(flags);
done = 0;
dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
"returned to issue_queue\n", HOSTNO);
@@ -1120,7 +1103,6 @@ static void NCR5380_main(struct work_str
&& !hostdata->dma_len
#endif
) {
- local_irq_restore(flags);
dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
HOSTNO);
NCR5380_information_transfer(instance);
@@ -1128,7 +1110,7 @@ static void NCR5380_main(struct work_str
done = 0;
}
} while (!done);
- local_irq_restore(flags);
+ spin_unlock_irq(&hostdata->lock);
}
@@ -1257,6 +1239,9 @@ static irqreturn_t NCR5380_intr(int irq,
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int handled = 0;
unsigned char basr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hostdata->lock, flags);
basr = NCR5380_read(BUS_AND_STATUS_REG);
if (basr & BASR_IRQ) {
@@ -1316,6 +1301,8 @@ static irqreturn_t NCR5380_intr(int irq,
#endif
}
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+
return IRQ_RETVAL(handled);
}
@@ -1355,7 +1342,6 @@ static int NCR5380_select(struct Scsi_Ho
unsigned char *data;
int len;
int err;
- unsigned long flags;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
@@ -1366,11 +1352,6 @@ static int NCR5380_select(struct Scsi_Ho
* data bus during SELECTION.
*/
- local_irq_save(flags);
- if (hostdata->connected) {
- local_irq_restore(flags);
- return -1;
- }
NCR5380_write(TARGET_COMMAND_REG, 0);
/*
@@ -1384,10 +1365,11 @@ static int NCR5380_select(struct Scsi_Ho
* Bus Free Delay, arbitration will begin.
*/
- local_irq_restore(flags);
+ spin_unlock_irq(&hostdata->lock);
err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
ICR_ARBITRATION_PROGRESS, HZ);
+ spin_lock_irq(&hostdata->lock);
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
/* Reselection interrupt */
return -1;
@@ -1398,6 +1380,7 @@ static int NCR5380_select(struct Scsi_Ho
"select: arbitration timeout\n");
return -1;
}
+ spin_unlock_irq(&hostdata->lock);
/* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
@@ -1405,11 +1388,11 @@ static int NCR5380_select(struct Scsi_Ho
/* Check for lost arbitration */
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
(NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
- (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
+ (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
HOSTNO);
+ spin_lock_irq(&hostdata->lock);
return -1;
}
@@ -1430,6 +1413,8 @@ static int NCR5380_select(struct Scsi_Ho
else
udelay(2);
+ spin_lock_irq(&hostdata->lock);
+
/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
return -1;
@@ -1457,14 +1442,10 @@ static int NCR5380_select(struct Scsi_Ho
* Reselect interrupts must be turned off prior to the dropping of BSY,
* otherwise we will trigger an interrupt.
*/
-
- if (hostdata->connected) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
-
NCR5380_write(SELECT_ENABLE_REG, 0);
+ spin_unlock_irq(&hostdata->lock);
+
/*
* The initiator shall then wait at least two deskew delays and release
* the BSY signal.
@@ -1505,6 +1486,7 @@ static int NCR5380_select(struct Scsi_Ho
msecs_to_jiffies(250));
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
if (!hostdata->connected)
@@ -1515,6 +1497,7 @@ static int NCR5380_select(struct Scsi_Ho
}
if (err < 0) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
#ifdef SUPPORT_TAGS
@@ -1554,6 +1537,7 @@ static int NCR5380_select(struct Scsi_Ho
/* Wait for start of REQ/ACK handshake */
err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(&hostdata->lock);
if (err < 0) {
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1583,6 +1567,7 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_transfer_pio(instance, &phase, &len, &data);
dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
/* XXX need to handle errors here */
+
hostdata->connected = cmd;
#ifndef SUPPORT_TAGS
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
@@ -1849,7 +1834,6 @@ static int NCR5380_transfer_dma(struct S
SETUP_HOSTDATA(instance);
register int c = *count;
register unsigned char p = *phase;
- unsigned long flags;
#if defined(CONFIG_SUN3)
/* sanity check */
@@ -1865,7 +1849,6 @@ static int NCR5380_transfer_dma(struct S
c, (p & SR_IO) ? "to" : "from", *data);
/* netbsd turns off ints here, why not be safe and do it too */
- local_irq_save(flags);
/* send start chain */
sun3scsi_dma_start(c, *data);
@@ -1885,8 +1868,6 @@ static int NCR5380_transfer_dma(struct S
dregs->csr |= CSR_DMA_ENABLE;
#endif
- local_irq_restore(flags);
-
sun3_dma_active = 1;
#else /* !defined(CONFIG_SUN3) */
@@ -1913,11 +1894,9 @@ static int NCR5380_transfer_dma(struct S
/* On the Medusa, it is a must to initialize the DMA before
* starting the NCR. This is also the cleaner way for the TT.
*/
- local_irq_save(flags);
hostdata->dma_len = (p & SR_IO) ?
NCR5380_dma_read_setup(instance, d, c) :
NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
}
if (p & SR_IO)
@@ -1931,11 +1910,9 @@ static int NCR5380_transfer_dma(struct S
/* On the Falcon, the DMA setup must be done after the last */
/* NCR access, else the DMA setup gets trashed!
*/
- local_irq_save(flags);
hostdata->dma_len = (p & SR_IO) ?
NCR5380_dma_read_setup(instance, d, c) :
NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
}
#endif /* !defined(CONFIG_SUN3) */
@@ -1963,7 +1940,6 @@ static int NCR5380_transfer_dma(struct S
static void NCR5380_information_transfer(struct Scsi_Host *instance)
{
SETUP_HOSTDATA(instance);
- unsigned long flags;
unsigned char msgout = NOP;
int sink = 0;
int len;
@@ -1972,13 +1948,13 @@ static void NCR5380_information_transfer
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd;
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_INTR;
#endif
- while (1) {
+ while ((cmd = hostdata->connected)) {
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -2112,9 +2088,13 @@ static void NCR5380_information_transfer
}
} else
#endif /* defined(REAL_DMA) */
+ {
+ spin_unlock_irq(&hostdata->lock);
NCR5380_transfer_pio(instance, &phase,
(int *)&cmd->SCp.this_residual,
(unsigned char **)&cmd->SCp.ptr);
+ spin_lock_irq(&hostdata->lock);
+ }
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
/* if we had intended to dma that command clear it */
if (sun3_dma_setup_done == cmd)
@@ -2124,7 +2104,6 @@ static void NCR5380_information_transfer
case PHASE_MSGIN:
len = 1;
data = &tmp;
- NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */
NCR5380_transfer_pio(instance, &phase, &len, &data);
cmd->SCp.Message = tmp;
@@ -2136,7 +2115,6 @@ static void NCR5380_information_transfer
dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
"completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
- local_irq_save(flags);
hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
@@ -2152,8 +2130,6 @@ static void NCR5380_information_transfer
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* I'm not sure what the correct thing to do here is :
@@ -2211,13 +2187,10 @@ static void NCR5380_information_transfer
* disconnected queue.
*/
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
switch (hostdata->last_message) {
case HEAD_OF_QUEUE_TAG:
case ORDERED_QUEUE_TAG:
@@ -2241,12 +2214,10 @@ static void NCR5380_information_transfer
case DISCONNECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- local_irq_save(flags);
LIST(cmd,hostdata->disconnected_queue);
SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
hostdata->disconnected_queue = cmd;
- local_irq_restore(flags);
dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %llu was "
"moved from connected to the "
"disconnected_queue\n", HOSTNO,
@@ -2277,8 +2248,6 @@ static void NCR5380_information_transfer
case RESTORE_POINTERS:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
break;
case EXTENDED_MESSAGE:
/*
@@ -2297,6 +2266,8 @@ static void NCR5380_information_transfer
/* Accept first byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ spin_unlock_irq(&hostdata->lock);
+
dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
len = 2;
@@ -2335,6 +2306,11 @@ static void NCR5380_information_transfer
HOSTNO, extended_msg[2], extended_msg[1]);
tmp = 0;
}
+
+ spin_lock_irq(&hostdata->lock);
+ if (!hostdata->connected)
+ return;
+
/* Fall through to reject message */
/*
@@ -2367,7 +2343,6 @@ static void NCR5380_information_transfer
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
- local_irq_save(flags);
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#else
@@ -2376,7 +2351,6 @@ static void NCR5380_information_transfer
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
@@ -2404,9 +2378,11 @@ static void NCR5380_information_transfer
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
} else {
+ spin_unlock_irq(&hostdata->lock);
NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(&hostdata->lock);
}
- } /* while (1) */
+ }
}
/*
@@ -2639,9 +2615,9 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
- NCR5380_print_status(instance);
+ spin_lock_irqsave(&hostdata->lock, flags);
- local_irq_save(flags);
+ NCR5380_print_status(instance);
dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
NCR5380_read(BUS_AND_STATUS_REG),
@@ -2683,11 +2659,11 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
cmd->scsi_done(cmd);
return SUCCESS;
} else {
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
printk("scsi%d: abort of connected command failed!\n", HOSTNO);
return FAILED;
}
@@ -2707,7 +2683,7 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
SET_NEXT(tmp, NULL);
tmp->result = DID_ABORT << 16;
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
HOSTNO);
/* Tagged queuing note: no tag to free here, hasn't been assigned
@@ -2729,7 +2705,7 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
*/
if (hostdata->connected) {
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
return FAILED;
}
@@ -2762,17 +2738,16 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
tmp = NEXT(tmp)) {
if (cmd == tmp) {
- local_irq_restore(flags);
dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
- if (NCR5380_select(instance, cmd))
+ if (NCR5380_select(instance, cmd)) {
+ spin_unlock_irq(&hostdata->lock);
return FAILED;
-
+ }
dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
do_abort(instance);
- local_irq_save(flags);
for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
@@ -2791,7 +2766,7 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
tmp->scsi_done(tmp);
return SUCCESS;
}
@@ -2804,7 +2779,7 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
* released after the abort, in case it is kept due to some bug.
*/
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
/*
* Case 5 : If we reached this point, the command was not found in any of
@@ -2836,7 +2811,7 @@ static int NCR5380_bus_reset(struct scsi
int i;
unsigned long flags;
- local_irq_save(flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
@@ -2876,7 +2851,7 @@ static int NCR5380_bus_reset(struct scsi
#endif
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:09.000000000 +1100
@@ -612,6 +612,7 @@ static int __maybe_unused NCR5380_show_i
{
struct NCR5380_hostdata *hostdata;
struct scsi_cmnd *ptr;
+ unsigned long flags;
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
@@ -619,7 +620,7 @@ static int __maybe_unused NCR5380_show_i
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
#endif
- spin_lock_irq(instance->host_lock);
+ spin_lock_irqsave(&hostdata->lock, flags);
if (!hostdata->connected)
seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
else
@@ -631,7 +632,7 @@ static int __maybe_unused NCR5380_show_i
seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return 0;
}
@@ -691,6 +692,7 @@ static int NCR5380_init(struct Scsi_Host
#ifdef REAL_DMA
hostdata->dmalen = 0;
#endif
+ spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
@@ -830,7 +832,7 @@ static int NCR5380_queue_command(struct
cmd->host_scribble = NULL;
cmd->result = 0;
- spin_lock_irqsave(instance->host_lock, flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
/*
* Insert the cmd into the issue queue. Note that REQUEST SENSE
@@ -848,7 +850,7 @@ static int NCR5380_queue_command(struct
LIST(cmd, tmp);
tmp->host_scribble = (unsigned char *) cmd;
}
- spin_unlock_irqrestore(instance->host_lock, flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
@@ -877,10 +879,10 @@ static void NCR5380_main(struct work_str
struct scsi_cmnd *tmp, *prev;
int done;
- spin_lock_irq(instance->host_lock);
+ spin_lock_irq(&hostdata->lock);
do {
- /* Lock held here */
done = 1;
+
if (!hostdata->connected) {
dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no);
/*
@@ -930,11 +932,10 @@ static void NCR5380_main(struct work_str
}
if (hostdata->connected)
break;
- /* lock held here still */
} /* if target/lun is not busy */
} /* for */
- /* exited locked */
} /* if (!hostdata->connected) */
+
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dmalen
@@ -946,8 +947,7 @@ static void NCR5380_main(struct work_str
done = 0;
}
} while (!done);
-
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irq(&hostdata->lock);
}
#ifndef DONT_USE_INTR
@@ -994,7 +994,7 @@ static irqreturn_t NCR5380_intr(int irq,
unsigned char basr;
unsigned long flags;
- spin_lock_irqsave(instance->host_lock, flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
basr = NCR5380_read(BUS_AND_STATUS_REG);
if (basr & BASR_IRQ) {
@@ -1058,7 +1058,7 @@ static irqreturn_t NCR5380_intr(int irq,
shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
}
- spin_unlock_irqrestore(instance->host_lock, flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1125,11 +1125,11 @@ static int NCR5380_select(struct Scsi_Ho
* Bus Free Delay, arbitration will begin.
*/
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irq(&hostdata->lock);
err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
ICR_ARBITRATION_PROGRESS, HZ);
- spin_lock_irq(instance->host_lock);
+ spin_lock_irq(&hostdata->lock);
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
/* Reselection interrupt */
return -1;
@@ -1140,6 +1140,7 @@ static int NCR5380_select(struct Scsi_Ho
"select: arbitration timeout\n");
return -1;
}
+ spin_unlock_irq(&hostdata->lock);
/* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
@@ -1148,6 +1149,7 @@ static int NCR5380_select(struct Scsi_Ho
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
+ spin_lock_irq(&hostdata->lock);
return -1;
}
@@ -1168,6 +1170,8 @@ static int NCR5380_select(struct Scsi_Ho
else
udelay(2);
+ spin_lock_irq(&hostdata->lock);
+
/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
return -1;
@@ -1196,6 +1200,8 @@ static int NCR5380_select(struct Scsi_Ho
*/
NCR5380_write(SELECT_ENABLE_REG, 0);
+ spin_unlock_irq(&hostdata->lock);
+
/*
* The initiator shall then wait at least two deskew delays and release
* the BSY signal.
@@ -1235,6 +1241,7 @@ static int NCR5380_select(struct Scsi_Ho
msecs_to_jiffies(250));
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
if (!hostdata->connected)
@@ -1244,6 +1251,7 @@ static int NCR5380_select(struct Scsi_Ho
}
if (err < 0) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
cmd->scsi_done(cmd);
@@ -1280,9 +1288,8 @@ static int NCR5380_select(struct Scsi_Ho
/* Wait for start of REQ/ACK handshake */
- spin_unlock_irq(instance->host_lock);
err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
- spin_lock_irq(instance->host_lock);
+ spin_lock_irq(&hostdata->lock);
if (err < 0) {
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1302,6 +1309,7 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_transfer_pio(instance, &phase, &len, &data);
dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no);
/* XXX need to handle errors here */
+
hostdata->connected = cmd;
hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF));
@@ -1805,9 +1813,9 @@ static void NCR5380_information_transfer
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd;
- while (1) {
+ while ((cmd = hostdata->connected)) {
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -1883,8 +1891,12 @@ static void NCR5380_information_transfer
cmd->SCp.this_residual -= transfersize - len;
} else
#endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */
+ {
+ spin_unlock_irq(&hostdata->lock);
NCR5380_transfer_pio(instance, &phase, (int *) &cmd->SCp.this_residual, (unsigned char **)
&cmd->SCp.ptr);
+ spin_lock_irq(&hostdata->lock);
+ }
break;
case PHASE_MSGIN:
len = 1;
@@ -2016,6 +2028,9 @@ static void NCR5380_information_transfer
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ spin_unlock_irq(&hostdata->lock);
+
dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no);
len = 2;
@@ -2050,6 +2065,11 @@ static void NCR5380_information_transfer
printk("scsi%d: extended message code %02x length %d is too long\n", instance->host_no, extended_msg[2], extended_msg[1]);
tmp = 0;
}
+
+ spin_lock_irq(&hostdata->lock);
+ if (!hostdata->connected)
+ return;
+
/* Fall through to reject message */
/*
@@ -2109,11 +2129,11 @@ static void NCR5380_information_transfer
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
} else {
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irq(&hostdata->lock);
NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
- spin_lock_irq(instance->host_lock);
+ spin_lock_irq(&hostdata->lock);
}
- } /* while (1) */
+ }
}
/*
@@ -2309,10 +2329,12 @@ static int NCR5380_abort(struct scsi_cmn
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
struct scsi_cmnd *tmp, **prev;
+ unsigned long flags;
scmd_printk(KERN_WARNING, cmd, "aborting command\n");
- spin_lock_irq(instance->host_lock);
+ spin_lock_irqsave(&hostdata->lock, flags);
+
NCR5380_print_status(instance);
dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
@@ -2359,7 +2381,7 @@ static int NCR5380_abort(struct scsi_cmn
REMOVE(5, *prev, tmp, tmp->host_scribble);
(*prev) = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
tmp->result = DID_ABORT << 16;
dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
tmp->scsi_done(tmp);
@@ -2383,7 +2405,7 @@ static int NCR5380_abort(struct scsi_cmn
*/
if (hostdata->connected) {
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no);
return FAILED;
}
@@ -2417,7 +2439,7 @@ static int NCR5380_abort(struct scsi_cmn
dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
if (NCR5380_select(instance, cmd)) {
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irq(&hostdata->lock);
return FAILED;
}
dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
@@ -2429,7 +2451,7 @@ static int NCR5380_abort(struct scsi_cmn
REMOVE(5, *prev, tmp, tmp->host_scribble);
*prev = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
tmp->result = DID_ABORT << 16;
tmp->scsi_done(tmp);
return SUCCESS;
@@ -2444,7 +2466,7 @@ static int NCR5380_abort(struct scsi_cmn
* so we won't panic, but we will notify the user in case something really
* broke.
*/
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
" before abortion\n", instance->host_no);
return FAILED;
@@ -2461,8 +2483,10 @@ static int NCR5380_abort(struct scsi_cmn
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long flags;
- spin_lock_irq(instance->host_lock);
+ spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
@@ -2471,7 +2495,7 @@ static int NCR5380_bus_reset(struct scsi
do_reset(instance);
- spin_unlock_irq(instance->host_lock);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 51/78] ncr5380: Remove command list debug code
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (49 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 50/78] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
` (27 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-remove-cmd-list-debug-code --]
[-- Type: text/plain, Size: 11849 bytes --]
Some NCR5380 hosts offer a .show_info method to access the contents of
the various command list data structures from a procfs file. When NDEBUG
is set, the same information is sent to the console during EH.
The two core drivers, atari_NCR5380.c and NCR5380.c differ here. Because
it is just for debugging, the easiest way to fix the discrepancy is
simply remove this code.
The only remaining users of NCR5380_show_info() and NCR5380_write_info()
are drivers that define PSEUDO_DMA. The others have no use for the
.show_info method, so don't initialize it.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 70 ++------------------------------
drivers/scsi/arm/oak.c | 2
drivers/scsi/atari_NCR5380.c | 94 +------------------------------------------
drivers/scsi/atari_scsi.c | 2
drivers/scsi/g_NCR5380.c | 1
drivers/scsi/sun3_scsi.c | 2
6 files changed, 9 insertions(+), 162 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -558,22 +558,6 @@ static void prepare_info(struct Scsi_Hos
"");
}
-/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * and NCR5380_debug to aid debugging.
- *
- * Locks: called functions disable irqs
- */
-
-static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
-{
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-}
-
#ifdef PSEUDO_DMA
/******************************************/
/*
@@ -598,65 +582,19 @@ static int __maybe_unused NCR5380_write_
hostdata->spin_max_w = 0;
return 0;
}
-#endif
-
-static
-void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
-static
-void lprint_command(unsigned char *cmd, struct seq_file *m);
-static
-void lprint_opcode(int opcode, struct seq_file *m);
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
-#ifdef PSEUDO_DMA
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
-#endif
- spin_lock_irqsave(&hostdata->lock, flags);
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
- spin_unlock_irqrestore(&hostdata->lock, flags);
return 0;
}
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- lprint_command(cmd->cmnd, m);
-}
-
-static void lprint_command(unsigned char *command, struct seq_file *m)
-{
- int i, s;
- lprint_opcode(command[0], m);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, "%02x ", command[i]);
- seq_putc(m, '\n');
-}
-
-static void lprint_opcode(int opcode, struct seq_file *m)
-{
- seq_printf(m, "%2d (0x%02x)", opcode, opcode);
-}
-
+#endif
/**
* NCR5380_init - initialise an NCR5380
@@ -2335,7 +2273,8 @@ static int NCR5380_abort(struct scsi_cmn
spin_lock_irqsave(&hostdata->lock, flags);
- NCR5380_print_status(instance);
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
@@ -2490,8 +2429,9 @@ static int NCR5380_bus_reset(struct scsi
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
- NCR5380_print_status(instance);
#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:09.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -657,94 +657,6 @@ static void prepare_info(struct Scsi_Hos
}
/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * to aid debugging.
- */
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd)
-{
- int i, s;
- unsigned char *command;
- printk("scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- printk(KERN_CONT " command = ");
- command = cmd->cmnd;
- printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- printk(KERN_CONT " %02x", command[i]);
- printk("\n");
-}
-
-static void __maybe_unused NCR5380_print_status(struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
-
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- if (!hostdata->connected)
- printk("scsi%d: no currently connected command\n", HOSTNO);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected);
- printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
- printk("\n");
-}
-
-static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- int i, s;
- unsigned char *command;
- seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- command = cmd->cmnd;
- seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, " %02x", command[i]);
- seq_putc(m, '\n');
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- spin_lock_irqsave(&hostdata->lock, flags);
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
- else
- show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- spin_unlock_irqrestore(&hostdata->lock, flags);
- return 0;
-}
-
-/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
* @flags: control flags
@@ -2617,7 +2529,8 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
spin_lock_irqsave(&hostdata->lock, flags);
- NCR5380_print_status(instance);
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
NCR5380_read(BUS_AND_STATUS_REG),
@@ -2815,8 +2728,9 @@ static int NCR5380_bus_reset(struct scsi
#if (NDEBUG & NDEBUG_ANY)
scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
- NCR5380_print_status(instance);
#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:04:12.000000000 +1100
@@ -28,7 +28,6 @@
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
-#define NCR5380_show_info oakscsi_show_info
#define NCR5380_implementation_fields \
void __iomem *base
@@ -104,7 +103,6 @@ printk("reading %p len %d\n", addr, len)
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
- .show_info = oakscsi_show_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:12.000000000 +1100
@@ -97,7 +97,6 @@
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -774,7 +773,6 @@ static int atari_scsi_bus_reset(struct s
static struct scsi_host_template atari_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
@@ -715,7 +715,6 @@ static int generic_NCR5380_dma_xfer_len(
static struct scsi_host_template driver_template = {
.proc_name = DRV_MODULE_NAME,
- .show_info = generic_NCR5380_show_info,
.name = "Generic NCR5380/NCR53C400 SCSI",
.detect = generic_NCR5380_detect,
.release = generic_NCR5380_release_resources,
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:12.000000000 +1100
@@ -53,7 +53,6 @@
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
-#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -459,7 +458,6 @@ static int sun3scsi_dma_finish(int write
static struct scsi_host_template sun3_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = sun3scsi_show_info,
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (50 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 51/78] ncr5380: Remove command list debug code Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 53/78] ncr5380: Use shost_priv helper Finn Thain
` (26 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-remove-H_NO-and-introduce-dsprintk --]
[-- Type: text/plain, Size: 8995 bytes --]
Replace all H_NO and some HOSTNO macros (both peculiar to atari_NCR5380.c)
with a new dsprintk macro that's more useful and more consistent. The new
macro avoids a lot of boilerplate in new code in subsequent patches. Keep
NCR5380.c in sync. Remaining HOSTNO macros are removed as side-effects
of subsequent patches.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 9 ++++---
drivers/scsi/NCR5380.h | 5 +++
drivers/scsi/atari_NCR5380.c | 54 +++++++++++++++++++++----------------------
3 files changed, 38 insertions(+), 30 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:09.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:14.000000000 +1100
@@ -285,6 +285,11 @@ struct NCR5380_hostdata {
do { if ((NDEBUG) & (flg)) \
printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
+#define dsprintk(flg, host, fmt, ...) \
+ do { if ((NDEBUG) & (flg)) \
+ shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
+ } while (0)
+
#if NDEBUG
#define NCR5380_dprint(flg, arg) \
do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:14.000000000 +1100
@@ -207,7 +207,6 @@
#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
#define HOSTNO instance->host_no
-#define H_NO(cmd) (cmd)->device->host->host_no
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
@@ -280,7 +279,8 @@ static void __init init_tags(struct NCR5
static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
if (hostdata->busy[cmd->device->id] & (1 << lun))
return 1;
@@ -290,8 +290,8 @@ static int is_lun_busy(struct scsi_cmnd
return 0;
if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >=
hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) {
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
- H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d: no free tags\n",
+ scmd_id(cmd), lun);
return 1;
}
return 0;
@@ -306,7 +306,8 @@ static int is_lun_busy(struct scsi_cmnd
static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
/* If we or the target don't support tagged queuing, allocate the LUN for
* an untagged command.
@@ -316,18 +317,16 @@ static void cmd_get_tag(struct scsi_cmnd
!cmd->device->tagged_supported) {
cmd->tag = TAG_NONE;
hostdata->busy[cmd->device->id] |= (1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
- "command\n", H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d now allocated by untagged command\n",
+ scmd_id(cmd), lun);
} else {
struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
set_bit(cmd->tag, ta->allocated);
ta->nr_allocated++;
- dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d "
- "(now %d tags in use)\n",
- H_NO(cmd), cmd->tag, cmd->device->id,
- lun, ta->nr_allocated);
+ dsprintk(NDEBUG_TAGS, instance, "using tag %d for target %d lun %d (%d tags allocated)\n",
+ cmd->tag, scmd_id(cmd), lun, ta->nr_allocated);
}
}
@@ -339,21 +338,22 @@ static void cmd_get_tag(struct scsi_cmnd
static void cmd_free_tag(struct scsi_cmnd *cmd)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
if (cmd->tag == TAG_NONE) {
hostdata->busy[cmd->device->id] &= ~(1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n",
- H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d untagged cmd freed\n",
+ scmd_id(cmd), lun);
} else if (cmd->tag >= MAX_TAGS) {
- printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
- H_NO(cmd), cmd->tag);
+ shost_printk(KERN_NOTICE, instance,
+ "trying to free bad tag %d!\n", cmd->tag);
} else {
struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
clear_bit(cmd->tag, ta->allocated);
ta->nr_allocated--;
- dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
- H_NO(cmd), cmd->tag, cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "freed tag %d for target %d lun %d\n",
+ cmd->tag, scmd_id(cmd), lun);
}
}
@@ -815,8 +815,7 @@ static int NCR5380_queue_command(struct
switch (cmd->cmnd[0]) {
case WRITE_6:
case WRITE_10:
- printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
- H_NO(cmd));
+ shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
cmd->result = (DID_ERROR << 16);
cmd->scsi_done(cmd);
return 0;
@@ -875,8 +874,8 @@ static int NCR5380_queue_command(struct
}
spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
- (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+ dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
+ cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
/* Kick off command processing */
queue_work(hostdata->work_q, &hostdata->main_task);
@@ -2079,8 +2078,9 @@ static void NCR5380_information_transfer
LIST(cmd,hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
- "issue queue\n", H_NO(cmd));
+ dsprintk(NDEBUG_QUEUES, instance,
+ "REQUEST SENSE cmd %p added to head of issue queue\n",
+ cmd);
} else {
cmd->scsi_done(cmd);
}
@@ -2746,11 +2746,11 @@ static int NCR5380_bus_reset(struct scsi
*/
if (hostdata->issue_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted issued command(s)\n");
if (hostdata->connected)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
if (hostdata->disconnected_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected command(s)\n");
hostdata->issue_queue = NULL;
hostdata->connected = NULL;
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:14.000000000 +1100
@@ -755,7 +755,7 @@ static int NCR5380_queue_command(struct
switch (cmd->cmnd[0]) {
case WRITE_6:
case WRITE_10:
- printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
cmd->result = (DID_ERROR << 16);
cmd->scsi_done(cmd);
return 0;
@@ -790,7 +790,8 @@ static int NCR5380_queue_command(struct
}
spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+ dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
+ cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
/* Kick off command processing */
queue_work(hostdata->work_q, &hostdata->main_task);
@@ -1888,7 +1889,9 @@ static void NCR5380_information_transfer
cmd->host_scribble = (unsigned char *)
hostdata->issue_queue;
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "REQUEST SENSE cmd %p added to head of issue queue\n",
+ cmd);
} else {
cmd->scsi_done(cmd);
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 53/78] ncr5380: Use shost_priv helper
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (51 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 52/78] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging Finn Thain
` (25 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-use-shost_priv --]
[-- Type: text/plain, Size: 7074 bytes --]
Make use of the shost_priv() helper. Remove HOSTDATA and SETUP_HOSTDATA
macros because they harm readability.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 23 ++++++++++-------------
drivers/scsi/atari_NCR5380.c | 20 +++++++-------------
2 files changed, 17 insertions(+), 26 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:14.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:15.000000000 +1100
@@ -464,7 +464,7 @@ static irqreturn_t __init probe_intr(int
static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
int possible)
{
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long timeout;
int trying_irqs, i, mask;
@@ -586,9 +586,7 @@ static int __maybe_unused NCR5380_write_
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
struct Scsi_Host *instance)
{
- struct NCR5380_hostdata *hostdata;
-
- hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
@@ -614,8 +612,8 @@ static int __maybe_unused NCR5380_show_i
static int NCR5380_init(struct Scsi_Host *instance, int flags)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
unsigned long deadline;
if(in_interrupt())
@@ -728,7 +726,7 @@ static int NCR5380_maybe_reset_bus(struc
static void NCR5380_exit(struct Scsi_Host *instance)
{
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
cancel_work_sync(&hostdata->main_task);
destroy_workqueue(hostdata->work_q);
@@ -1037,7 +1035,7 @@ static irqreturn_t NCR5380_intr(int irq,
static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
unsigned char *data;
int len;
@@ -1511,7 +1509,7 @@ static int NCR5380_transfer_dma(struct S
unsigned char saved_data = 0, overrun = 0, residue;
#endif
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
@@ -1743,7 +1741,7 @@ static int NCR5380_transfer_dma(struct S
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance) {
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
int len;
@@ -2090,8 +2088,7 @@ static void NCR5380_information_transfer
*/
static void NCR5380_reselect(struct Scsi_Host *instance) {
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)
- instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun, phase;
int len;
@@ -2214,7 +2211,7 @@ static void NCR5380_reselect(struct Scsi
#ifdef REAL_DMA
static void NCR5380_dma_complete(NCR5380_instance * instance) {
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
/*
@@ -2268,7 +2265,7 @@ static void NCR5380_dma_complete(NCR5380
static int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
struct scsi_cmnd *tmp, **prev;
unsigned long flags;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:14.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:15.000000000 +1100
@@ -196,12 +196,6 @@
* possible) function may be used.
*/
-/* Macros ease life... :-) */
-#define SETUP_HOSTDATA(in) \
- struct NCR5380_hostdata *hostdata = \
- (struct NCR5380_hostdata *)(in)->hostdata
-#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-
#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
@@ -672,8 +666,8 @@ static void prepare_info(struct Scsi_Hos
static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
- SETUP_HOSTDATA(instance);
unsigned long deadline;
hostdata->host = instance;
@@ -1038,7 +1032,7 @@ static void NCR5380_main(struct work_str
static void NCR5380_dma_complete(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
unsigned char **data;
volatile int *count;
@@ -1248,7 +1242,7 @@ static irqreturn_t NCR5380_intr(int irq,
static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
unsigned char *data;
int len;
@@ -1742,7 +1736,7 @@ static int NCR5380_transfer_dma(struct S
unsigned char *phase, int *count,
unsigned char **data)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
register int c = *count;
register unsigned char p = *phase;
@@ -1850,7 +1844,7 @@ static int NCR5380_transfer_dma(struct S
static void NCR5380_information_transfer(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
int len;
@@ -2314,7 +2308,7 @@ static void NCR5380_information_transfer
static void NCR5380_reselect(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun;
#ifdef SUPPORT_TAGS
@@ -2521,7 +2515,7 @@ static
int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
struct scsi_cmnd *tmp, **prev;
unsigned long flags;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (52 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 53/78] ncr5380: Use shost_priv helper Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros Finn Thain
` (24 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-use-dsprintk-for-queue-debugging --]
[-- Type: text/plain, Size: 9981 bytes --]
Print the command pointers in the log messages for debugging queue data
structures. The LIST and REMOVE macros can then be removed.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 36 ++++++++++++++++++++++++------------
drivers/scsi/atari_NCR5380.c | 43 +++++++++++++++++++++++--------------------
2 files changed, 47 insertions(+), 32 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:15.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:17.000000000 +1100
@@ -936,10 +936,8 @@ static void NCR5380_main(struct work_str
prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
u8 lun = tmp->device->lun;
- dprintk(NDEBUG_LISTS,
- "MAIN tmp=%p target=%d busy=%d lun=%d\n",
- tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
- lun);
+ dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%d\n",
+ tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)], lun);
/* When we find one, remove it from the issue queue. */
if (
#ifdef SUPPORT_TAGS
@@ -956,6 +954,10 @@ static void NCR5380_main(struct work_str
hostdata->issue_queue = NEXT(tmp);
}
SET_NEXT(tmp, NULL);
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
+ instance, "main: removed %p from issue queue %p\n",
+ tmp, prev);
+
hostdata->retain_dma_intr++;
/*
@@ -964,9 +966,6 @@ static void NCR5380_main(struct work_str
* On failure, we must add the command back to the
* issue queue so we can keep trying.
*/
- dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d "
- "lun %d removed from issue_queue\n",
- HOSTNO, tmp->device->id, lun);
/*
* REQUEST SENSE commands are issued without tagged
* queueing, even on SCSI-II devices because the
@@ -989,13 +988,14 @@ static void NCR5380_main(struct work_str
LIST(tmp, hostdata->issue_queue);
SET_NEXT(tmp, hostdata->issue_queue);
hostdata->issue_queue = tmp;
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
+ instance, "main: select() failed, %p returned to issue queue\n",
+ tmp);
#ifdef SUPPORT_TAGS
cmd_free_tag(tmp);
#endif
hostdata->retain_dma_intr--;
done = 0;
- dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
- "returned to issue_queue\n", HOSTNO);
}
if (hostdata->connected)
break;
@@ -2017,8 +2017,9 @@ static void NCR5380_information_transfer
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
- "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "COMMAND COMPLETE %p target %d lun %llu\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
@@ -2067,13 +2068,11 @@ static void NCR5380_information_transfer
(status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO);
-
LIST(cmd,hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dsprintk(NDEBUG_QUEUES, instance,
- "REQUEST SENSE cmd %p added to head of issue queue\n",
+ dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
+ instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
} else {
cmd->scsi_done(cmd);
@@ -2124,10 +2123,10 @@ static void NCR5380_information_transfer
SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
hostdata->disconnected_queue = cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %llu was "
- "moved from connected to the "
- "disconnected_queue\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
+
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
@@ -2427,7 +2426,11 @@ static void NCR5380_reselect(struct Scsi
}
}
- if (!tmp) {
+ if (tmp) {
+ dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
+ "reselect: removed %p from disconnected queue\n", tmp);
+ } else {
+
#ifdef SUPPORT_TAGS
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n",
target_mask, lun, tag);
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:15.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:17.000000000 +1100
@@ -828,8 +828,9 @@ static void NCR5380_main(struct work_str
*/
for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
{
- if (prev != tmp)
- dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun);
+ dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%llu\n",
+ tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
+ tmp->device->lun);
/* When we find one, remove it from the issue queue. */
if (!(hostdata->busy[tmp->device->id] &
(1 << (u8)(tmp->device->lun & 0xff)))) {
@@ -841,6 +842,9 @@ static void NCR5380_main(struct work_str
hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
}
tmp->host_scribble = NULL;
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
+ instance, "main: removed %p from issue queue %p\n",
+ tmp, prev);
/*
* Attempt to establish an I_T_L nexus here.
@@ -848,8 +852,6 @@ static void NCR5380_main(struct work_str
* On failure, we must add the command back to the
* issue queue so we can keep trying.
*/
- dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun);
-
/*
* REQUEST SENSE commands are issued without tagged
* queueing, even on SCSI-II devices because the
@@ -864,8 +866,10 @@ static void NCR5380_main(struct work_str
LIST(tmp, hostdata->issue_queue);
tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = tmp;
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
+ instance, "main: select() failed, %p returned to issue queue\n",
+ tmp);
done = 0;
- dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no);
}
if (hostdata->connected)
break;
@@ -1847,8 +1851,11 @@ static void NCR5380_information_transfer
/* Accept message by clearing ACK */
sink = 1;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "COMMAND COMPLETE %p target %d lun %llu\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
+
hostdata->connected = NULL;
- dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d, lun %llu completed\n", instance->host_no, cmd->device->id, cmd->device->lun);
hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
/*
@@ -1881,14 +1888,12 @@ static void NCR5380_information_transfer
if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- dprintk(NDEBUG_AUTOSENSE, "scsi%d : performing request sense\n", instance->host_no);
-
LIST(cmd, hostdata->issue_queue);
cmd->host_scribble = (unsigned char *)
hostdata->issue_queue;
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dsprintk(NDEBUG_QUEUES, instance,
- "REQUEST SENSE cmd %p added to head of issue queue\n",
+ dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
+ instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
} else {
cmd->scsi_done(cmd);
@@ -1925,7 +1930,10 @@ static void NCR5380_information_transfer
hostdata->disconnected_queue;
hostdata->connected = NULL;
hostdata->disconnected_queue = cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d lun %llu was moved from connected to" " the disconnected_queue\n", instance->host_no, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
+
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
@@ -2178,7 +2186,11 @@ static void NCR5380_reselect(struct Scsi
break;
}
}
- if (!tmp) {
+
+ if (tmp) {
+ dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
+ "reselect: removed %p from disconnected queue\n", tmp);
+ } else {
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
target_mask, lun);
/*
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (53 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 54/78] ncr5380: Use dsprintk() for queue debugging Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers Finn Thain
` (23 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-LIST-and-REMOVE-macros --]
[-- Type: text/plain, Size: 8697 bytes --]
Printing command pointers can be useful when debugging queues. Other than
that, the LIST and REMOVE macros are just clutter. These macros are
redundant now that NDEBUG_QUEUES causes pointers to be printed, so remove
them.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 19 -------------------
drivers/scsi/atari_NCR5380.c | 32 --------------------------------
2 files changed, 51 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:17.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:18.000000000 +1100
@@ -80,14 +80,6 @@
* tagged queueing)
*/
-#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
-#define REMOVE(w,x,y,z) {printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, (void*)(w), (void*)(x), (void*)(y), (void*)(z)); if ((x)==(y)) udelay(5); }
-#else
-#define LIST(x,y)
-#define REMOVE(w,x,y,z)
-#endif
-
#ifndef notyet
#undef REAL_DMA
#endif
@@ -778,12 +770,10 @@ static int NCR5380_queue_command(struct
*/
if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
cmd->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = cmd;
} else {
for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
- LIST(cmd, tmp);
tmp->host_scribble = (unsigned char *) cmd;
}
spin_unlock_irqrestore(&hostdata->lock, flags);
@@ -835,10 +825,8 @@ static void NCR5380_main(struct work_str
if (!(hostdata->busy[tmp->device->id] &
(1 << (u8)(tmp->device->lun & 0xff)))) {
if (prev) {
- REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
prev->host_scribble = tmp->host_scribble;
} else {
- REMOVE(-1, hostdata->issue_queue, tmp, tmp->host_scribble);
hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
}
tmp->host_scribble = NULL;
@@ -863,7 +851,6 @@ static void NCR5380_main(struct work_str
/* OK or bad target */
} else {
/* Need to retry */
- LIST(tmp, hostdata->issue_queue);
tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = tmp;
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
@@ -1888,7 +1875,6 @@ static void NCR5380_information_transfer
if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- LIST(cmd, hostdata->issue_queue);
cmd->host_scribble = (unsigned char *)
hostdata->issue_queue;
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
@@ -1925,7 +1911,6 @@ static void NCR5380_information_transfer
case DISCONNECT:{
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- LIST(cmd, hostdata->disconnected_queue);
cmd->host_scribble = (unsigned char *)
hostdata->disconnected_queue;
hostdata->connected = NULL;
@@ -2175,10 +2160,8 @@ static void NCR5380_reselect(struct Scsi
tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) {
if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)) {
if (prev) {
- REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
prev->host_scribble = tmp->host_scribble;
} else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
hostdata->disconnected_queue =
(struct scsi_cmnd *) tmp->host_scribble;
}
@@ -2329,7 +2312,6 @@ static int NCR5380_abort(struct scsi_cmn
dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no);
for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
- REMOVE(5, *prev, tmp, tmp->host_scribble);
(*prev) = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
spin_unlock_irqrestore(&hostdata->lock, flags);
@@ -2399,7 +2381,6 @@ static int NCR5380_abort(struct scsi_cmn
for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
- REMOVE(5, *prev, tmp, tmp->host_scribble);
*prev = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
spin_unlock_irqrestore(&hostdata->lock, flags);
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:17.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:18.000000000 +1100
@@ -68,27 +68,6 @@
/* Adapted for the sun3 by Sam Creasey. */
-#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x, y) \
- do { \
- printk("LINE:%d Adding %p to %p\n", \
- __LINE__, (void*)(x), (void*)(y)); \
- if ((x) == (y)) \
- udelay(5); \
- } while (0)
-#define REMOVE(w, x, y, z) \
- do { \
- printk("LINE:%d Removing: %p->%p %p->%p \n", \
- __LINE__, (void*)(w), (void*)(x), \
- (void*)(y), (void*)(z)); \
- if ((x) == (y)) \
- udelay(5); \
- } while (0)
-#else
-#define LIST(x,y)
-#define REMOVE(w,x,y,z)
-#endif
-
/*
* Design
*
@@ -856,14 +835,12 @@ static int NCR5380_queue_command(struct
*/
if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = cmd;
} else {
for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
NEXT(tmp); tmp = NEXT(tmp))
;
- LIST(cmd, tmp);
SET_NEXT(tmp, cmd);
}
spin_unlock_irqrestore(&hostdata->lock, flags);
@@ -947,10 +924,8 @@ static void NCR5380_main(struct work_str
#endif
) {
if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
SET_NEXT(prev, NEXT(tmp));
} else {
- REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp));
hostdata->issue_queue = NEXT(tmp);
}
SET_NEXT(tmp, NULL);
@@ -985,7 +960,6 @@ static void NCR5380_main(struct work_str
maybe_release_dma_irq(instance);
} else {
/* Need to retry */
- LIST(tmp, hostdata->issue_queue);
SET_NEXT(tmp, hostdata->issue_queue);
hostdata->issue_queue = tmp;
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
@@ -2068,7 +2042,6 @@ static void NCR5380_information_transfer
(status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- LIST(cmd,hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = (struct scsi_cmnd *) cmd;
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
@@ -2119,7 +2092,6 @@ static void NCR5380_information_transfer
case DISCONNECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- LIST(cmd,hostdata->disconnected_queue);
SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
hostdata->disconnected_queue = cmd;
@@ -2415,10 +2387,8 @@ static void NCR5380_reselect(struct Scsi
#endif
) {
if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
SET_NEXT(prev, NEXT(tmp));
} else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp));
hostdata->disconnected_queue = NEXT(tmp);
}
SET_NEXT(tmp, NULL);
@@ -2588,7 +2558,6 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
tmp = (struct scsi_cmnd *)hostdata->issue_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
(*prev) = NEXT(tmp);
SET_NEXT(tmp, NULL);
tmp->result = DID_ABORT << 16;
@@ -2662,7 +2631,6 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
*prev = NEXT(tmp);
SET_NEXT(tmp, NULL);
tmp->result = DID_ABORT << 16;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (54 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 55/78] ncr5380: Remove LIST and REMOVE macros Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 57/78] ncr5380: Use standard list data structure Finn Thain
` (22 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-remove-redundant-volatile-qualifiers --]
[-- Type: text/plain, Size: 2367 bytes --]
The hostdata struct is now protected by a spin lock so the volatile
qualifiers are redundant. Remove them.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.h | 12 ++++++------
drivers/scsi/atari_NCR5380.c | 2 +-
2 files changed, 7 insertions(+), 7 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:14.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:19.000000000 +1100
@@ -248,14 +248,14 @@ struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
- volatile unsigned char busy[8]; /* index = target, bit = lun */
+ unsigned char busy[8]; /* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
- volatile int dma_len; /* requested length of DMA */
+ int dma_len; /* requested length of DMA */
#endif
- volatile unsigned char last_message; /* last message OUT */
- volatile struct scsi_cmnd *connected; /* currently connected command */
- volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
- volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
+ unsigned char last_message; /* last message OUT */
+ struct scsi_cmnd *connected; /* currently connected cmnd */
+ struct scsi_cmnd *issue_queue; /* waiting to be issued */
+ struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
spinlock_t lock; /* protects this struct */
int flags;
struct scsi_eh_save ses;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:18.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:19.000000000 +1100
@@ -1009,7 +1009,7 @@ static void NCR5380_dma_complete(struct
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
unsigned char **data;
- volatile int *count;
+ int *count;
int saved_data = 0, overrun = 0;
unsigned char p;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 57/78] ncr5380: Use standard list data structure
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (55 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 56/78] ncr5380: Remove redundant volatile qualifiers Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:05 ` [PATCH v4 58/78] ncr5380: Refactor command completion Finn Thain
` (21 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-use-list_head --]
[-- Type: text/plain, Size: 34534 bytes --]
The NCR5380 drivers have a home-spun linked list implementation for
scsi_cmnd structs that uses cmd->host_scribble as a 'next' pointer. Adopt
the standard list_head data structure and list operations instead. Remove
the eh_abort_handler rather than convert it. Doing the conversion would
only be churn because the existing EH handlers don't work and get replaced
in a subsequent patch.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changed since v2:
- Fix NULL pointer dereference in NCR5380_reselect() when SUPPORT_TAGS is
enabled in the atari_NCR5380.c core driver.
---
drivers/scsi/NCR5380.c | 214 +++++---------------------------
drivers/scsi/NCR5380.h | 16 ++
drivers/scsi/arm/cumana_1.c | 1
drivers/scsi/arm/oak.c | 1
drivers/scsi/atari_NCR5380.c | 287 ++++++-------------------------------------
drivers/scsi/atari_scsi.c | 1
drivers/scsi/dmx3191d.c | 1
drivers/scsi/dtc.c | 1
drivers/scsi/g_NCR5380.c | 1
drivers/scsi/mac_scsi.c | 1
drivers/scsi/pas16.c | 1
drivers/scsi/sun3_scsi.c | 1
drivers/scsi/t128.c | 1
13 files changed, 106 insertions(+), 421 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:18.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:20.000000000 +1100
@@ -622,8 +622,9 @@ static int NCR5380_init(struct Scsi_Host
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
hostdata->flags = flags;
INIT_WORK(&hostdata->main_task, NCR5380_main);
@@ -738,7 +739,7 @@ static int NCR5380_queue_command(struct
struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp;
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
@@ -752,12 +753,6 @@ static int NCR5380_queue_command(struct
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- cmd->host_scribble = NULL;
cmd->result = 0;
spin_lock_irqsave(&hostdata->lock, flags);
@@ -769,13 +764,11 @@ static int NCR5380_queue_command(struct
* sense data is only guaranteed to be valid while the condition exists.
*/
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- cmd->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
- tmp->host_scribble = (unsigned char *) cmd;
- }
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
+
spin_unlock_irqrestore(&hostdata->lock, flags);
dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
@@ -803,7 +796,7 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct NCR5380_cmd *ncmd, *n;
int done;
spin_lock_irq(&hostdata->lock);
@@ -816,23 +809,20 @@ static void NCR5380_main(struct work_str
* Search through the issue_queue for a command destined
* for a target that's not busy.
*/
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
- {
+ list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
+ list) {
+ struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
+
dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%llu\n",
tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
tmp->device->lun);
/* When we find one, remove it from the issue queue. */
if (!(hostdata->busy[tmp->device->id] &
(1 << (u8)(tmp->device->lun & 0xff)))) {
- if (prev) {
- prev->host_scribble = tmp->host_scribble;
- } else {
- hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
+ list_del(&ncmd->list);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue %p\n",
- tmp, prev);
+ instance, "main: removed %p from issue queue\n",
+ tmp);
/*
* Attempt to establish an I_T_L nexus here.
@@ -851,8 +841,7 @@ static void NCR5380_main(struct work_str
/* OK or bad target */
} else {
/* Need to retry */
- tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = tmp;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
instance, "main: select() failed, %p returned to issue queue\n",
tmp);
@@ -1744,6 +1733,8 @@ static void NCR5380_information_transfer
struct scsi_cmnd *cmd;
while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -1875,9 +1866,7 @@ static void NCR5380_information_transfer
if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- cmd->host_scribble = (unsigned char *)
- hostdata->issue_queue;
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
@@ -1911,10 +1900,8 @@ static void NCR5380_information_transfer
case DISCONNECT:{
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->host_scribble = (unsigned char *)
- hostdata->disconnected_queue;
hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
+ list_add(&ncmd->list, &hostdata->disconnected);
dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
cmd, scmd_id(cmd), cmd->device->lun);
@@ -2087,7 +2074,8 @@ static void NCR5380_reselect(struct Scsi
int len;
unsigned char msg[3];
unsigned char *data;
- struct scsi_cmnd *tmp = NULL, *prev;
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2156,16 +2144,14 @@ static void NCR5380_reselect(struct Scsi
* just reestablished, and remove it from the disconnected queue.
*/
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)) {
- if (prev) {
- prev->host_scribble = tmp->host_scribble;
- } else {
- hostdata->disconnected_queue =
- (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun) {
+ list_del(&ncmd->list);
+ tmp = cmd;
break;
}
}
@@ -2261,146 +2247,18 @@ static int NCR5380_abort(struct scsi_cmn
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp, **prev;
unsigned long flags;
- scmd_printk(KERN_WARNING, cmd, "aborting command\n");
-
spin_lock_irqsave(&hostdata->lock, flags);
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
+#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
- dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
- dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
-
-#if 0
-/*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
-
- if (hostdata->connected == cmd) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no);
-/*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN);
-/*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
-
-/*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
-
- return SUCCESS;
- }
-#endif
-
-/*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
-
- dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no);
- for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- (*prev) = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->result = DID_ABORT << 16;
- dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
-#if (NDEBUG & NDEBUG_ABORT)
- /* KLL */
- else if (prev == tmp)
- printk(KERN_ERR "scsi%d : LOOP\n", instance->host_no);
-#endif
-
-/*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
-
- if (hostdata->connected) {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no);
- return FAILED;
- }
-/*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
-
- if (NCR5380_select(instance, cmd)) {
- spin_unlock_irq(&hostdata->lock);
- return FAILED;
- }
- dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
-
- do_abort(instance);
-
- for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- *prev = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->result = DID_ABORT << 16;
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-/*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
spin_unlock_irqrestore(&hostdata->lock, flags);
- printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
- " before abortion\n", instance->host_no);
+
return FAILED;
}
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:19.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:20.000000000 +1100
@@ -175,10 +175,6 @@
* possible) function may be used.
*/
-#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
-#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
-
#define HOSTNO instance->host_no
static int do_abort(struct Scsi_Host *);
@@ -665,8 +661,9 @@ static int __init NCR5380_init(struct Sc
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
hostdata->flags = flags;
INIT_WORK(&hostdata->main_task, NCR5380_main);
@@ -781,7 +778,7 @@ static int NCR5380_queue_command(struct
struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp;
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
@@ -795,12 +792,6 @@ static int NCR5380_queue_command(struct
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- SET_NEXT(cmd, NULL);
cmd->result = 0;
/*
@@ -834,15 +825,11 @@ static int NCR5380_queue_command(struct
* sense data is only guaranteed to be valid while the condition exists.
*/
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- NEXT(tmp); tmp = NEXT(tmp))
- ;
- SET_NEXT(tmp, cmd);
- }
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
+
spin_unlock_irqrestore(&hostdata->lock, flags);
dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
@@ -858,8 +845,8 @@ static inline void maybe_release_dma_irq
struct NCR5380_hostdata *hostdata = shost_priv(instance);
/* Caller does the locking needed to set & test these data atomically */
- if (!hostdata->disconnected_queue &&
- !hostdata->issue_queue &&
+ if (list_empty(&hostdata->disconnected) &&
+ list_empty(&hostdata->unissued) &&
!hostdata->connected &&
!hostdata->retain_dma_intr)
NCR5380_release_dma_irq(instance);
@@ -881,7 +868,7 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct NCR5380_cmd *ncmd, *n;
int done;
/*
@@ -900,17 +887,9 @@ static void NCR5380_main(struct work_str
* Search through the issue_queue for a command destined
* for a target that's not busy.
*/
-#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
- tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
- ;
- /*printk("%p ", tmp);*/
- if ((tmp == prev) && tmp)
- printk(" LOOP\n");
- /* else printk("\n"); */
-#endif
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
- prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
+ list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
+ list) {
+ struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
u8 lun = tmp->device->lun;
dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%d\n",
@@ -923,15 +902,10 @@ static void NCR5380_main(struct work_str
!(hostdata->busy[tmp->device->id] & (1 << lun))
#endif
) {
- if (prev) {
- SET_NEXT(prev, NEXT(tmp));
- } else {
- hostdata->issue_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
+ list_del(&ncmd->list);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue %p\n",
- tmp, prev);
+ instance, "main: removed %p from issue queue\n",
+ tmp);
hostdata->retain_dma_intr++;
@@ -960,8 +934,7 @@ static void NCR5380_main(struct work_str
maybe_release_dma_irq(instance);
} else {
/* Need to retry */
- SET_NEXT(tmp, hostdata->issue_queue);
- hostdata->issue_queue = tmp;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
instance, "main: select() failed, %p returned to issue queue\n",
tmp);
@@ -1834,6 +1807,8 @@ static void NCR5380_information_transfer
#endif
while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -2042,8 +2017,7 @@ static void NCR5380_information_transfer
(status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
+ list_add(&ncmd->list, &hostdata->unissued);
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
@@ -2092,9 +2066,8 @@ static void NCR5380_information_transfer
case DISCONNECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
+ list_add(&ncmd->list, &hostdata->disconnected);
dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
cmd, scmd_id(cmd), cmd->device->lun);
@@ -2288,7 +2261,8 @@ static void NCR5380_reselect(struct Scsi
unsigned char msg[3];
int __maybe_unused len;
unsigned char __maybe_unused *data, __maybe_unused phase;
- struct scsi_cmnd *tmp = NULL, *prev;
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2379,19 +2353,18 @@ static void NCR5380_reselect(struct Scsi
* just reestablished, and remove it from the disconnected queue.
*/
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = NEXT(tmp)) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun
#ifdef SUPPORT_TAGS
- && (tag == tmp->tag)
+ && (tag == cmd->tag)
#endif
) {
- if (prev) {
- SET_NEXT(prev, NEXT(tmp));
- } else {
- hostdata->disconnected_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
+ list_del(&ncmd->list);
+ tmp = cmd;
break;
}
}
@@ -2489,188 +2462,18 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp, **prev;
unsigned long flags;
- scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
-
spin_lock_irqsave(&hostdata->lock, flags);
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
+#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
- dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
- NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
-#if 1
- /*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
-
- if (hostdata->connected == cmd) {
-
- dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
- /*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
-
- /* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
- /*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
-
- /*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
-
- if (do_abort(instance) == 0) {
- hostdata->connected = NULL;
- cmd->result = DID_ABORT << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- cmd->scsi_done(cmd);
- return SUCCESS;
- } else {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return FAILED;
- }
- }
-#endif
-
- /*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
- for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue),
- tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- (*prev) = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
- HOSTNO);
- /* Tagged queuing note: no tag to free here, hasn't been assigned
- * yet... */
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-
- /*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
-
- if (hostdata->connected) {
- spin_unlock_irqrestore(&hostdata->lock, flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
- return FAILED;
- }
-
- /*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
- tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
-
- if (NCR5380_select(instance, cmd)) {
- spin_unlock_irq(&hostdata->lock);
- return FAILED;
- }
- dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
-
- do_abort(instance);
-
- for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
- tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- *prev = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- /* We must unlock the tag/LUN immediately here, since the
- * target goes to BUS FREE and doesn't send us another
- * message (COMMAND_COMPLETE or the like)
- */
-#ifdef SUPPORT_TAGS
- cmd_free_tag(tmp);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- spin_unlock_irqrestore(&hostdata->lock, flags);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
- }
- }
-
- /* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
- /*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
-
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
-
return FAILED;
}
@@ -2710,16 +2513,18 @@ static int NCR5380_bus_reset(struct scsi
* commands!
*/
- if (hostdata->issue_queue)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted issued command(s)\n");
if (hostdata->connected)
dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
- if (hostdata->disconnected_queue)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected command(s)\n");
-
- hostdata->issue_queue = NULL;
hostdata->connected = NULL;
- hostdata->disconnected_queue = NULL;
+
+ if (!list_empty(&hostdata->unissued))
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted unissued list\n");
+ INIT_LIST_HEAD(&hostdata->unissued);
+
+ if (!list_empty(&hostdata->disconnected))
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected list\n");
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:19.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:20.000000000 +1100
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/list.h>
#include <linux/workqueue.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
@@ -254,8 +255,8 @@ struct NCR5380_hostdata {
#endif
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
- struct scsi_cmnd *issue_queue; /* waiting to be issued */
- struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
+ struct list_head unissued; /* waiting to be issued */
+ struct list_head disconnected; /* waiting for reconnect */
spinlock_t lock; /* protects this struct */
int flags;
struct scsi_eh_save ses;
@@ -277,6 +278,17 @@ struct NCR5380_hostdata {
#ifdef __KERNEL__
+struct NCR5380_cmd {
+ struct list_head list;
+};
+
+#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
+
+static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
+{
+ return ((struct scsi_cmnd *)ncmd_ptr) - 1;
+}
+
#ifndef NDEBUG
#define NDEBUG (0)
#endif
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:04:00.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:04:20.000000000 +1100
@@ -208,6 +208,7 @@ static struct scsi_host_template cumanas
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "CumanaSCSI-1",
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int cumanascsi1_probe(struct expansion_card *ec,
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:04:20.000000000 +1100
@@ -114,6 +114,7 @@ static struct scsi_host_template oakscsi
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:20.000000000 +1100
@@ -780,6 +780,7 @@ static struct scsi_host_template atari_s
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init atari_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:04:08.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:04:20.000000000 +1100
@@ -61,6 +61,7 @@ static struct scsi_host_template dmx3191
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int dmx3191d_probe_one(struct pci_dev *pdev,
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:04:20.000000000 +1100
@@ -452,5 +452,6 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:20.000000000 +1100
@@ -728,6 +728,7 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:04:20.000000000 +1100
@@ -323,6 +323,7 @@ static struct scsi_host_template mac_scs
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init mac_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:04:20.000000000 +1100
@@ -562,6 +562,7 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:12.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:20.000000000 +1100
@@ -468,6 +468,7 @@ static struct scsi_host_template sun3_sc
.sg_tablesize = SG_NONE,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init sun3_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:04:20.000000000 +1100
@@ -406,5 +406,6 @@ static struct scsi_host_template driver_
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
#include "scsi_module.c"
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 58/78] ncr5380: Refactor command completion
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (56 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 57/78] ncr5380: Use standard list data structure Finn Thain
@ 2016-01-03 5:05 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 59/78] ncr5380: Fix autosense bugs Finn Thain
` (20 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:05 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-complete_cmd --]
[-- Type: text/plain, Size: 6928 bytes --]
Implement a 'complete_cmd' function to complete commands. This is needed
by the following patch; the new function provides a site for the logic
needed to correctly handle REQUEST SENSE commands.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 31 ++++++++++++++++++++++------
drivers/scsi/atari_NCR5380.c | 46 ++++++++++++++++++++++++++++---------------
2 files changed, 55 insertions(+), 22 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:24.000000000 +1100
@@ -765,6 +765,27 @@ static void NCR5380_exit(struct Scsi_Hos
}
/**
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+#ifdef SUPPORT_TAGS
+ cmd_free_tag(cmd);
+#else
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+#endif
+ cmd->scsi_done(cmd);
+}
+
+/**
* NCR5380_queue_command - queue a command
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
@@ -1352,10 +1373,7 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#endif
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
return 0;
@@ -1866,7 +1884,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
case PHASE_DATAIN:
@@ -1926,7 +1944,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else {
#ifdef REAL_DMA
@@ -1982,8 +2000,6 @@ static void NCR5380_information_transfer
if (ta->queue_size > ta->nr_allocated)
ta->queue_size = ta->nr_allocated;
}
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
/*
@@ -2021,8 +2037,13 @@ static void NCR5380_information_transfer
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
+#ifdef SUPPORT_TAGS
+ cmd_free_tag(cmd);
+#else
+ hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
+#endif
} else {
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
}
/*
@@ -2193,15 +2214,10 @@ static void NCR5380_information_transfer
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
+ complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
- cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:24.000000000 +1100
@@ -726,6 +726,24 @@ static void NCR5380_exit(struct Scsi_Hos
}
/**
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+
+ cmd->scsi_done(cmd);
+}
+
+/**
* NCR5380_queue_command - queue a command
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
@@ -1171,7 +1189,7 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
cmd->result = DID_BAD_TARGET << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n",
instance->host_no);
@@ -1759,7 +1777,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
case PHASE_DATAIN:
@@ -1804,7 +1822,7 @@ static void NCR5380_information_transfer
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
@@ -1834,7 +1852,6 @@ static void NCR5380_information_transfer
cmd, scmd_id(cmd), cmd->device->lun);
hostdata->connected = NULL;
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
/*
* I'm not sure what the correct thing to do here is :
@@ -1870,8 +1887,9 @@ static void NCR5380_information_transfer
dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
cmd);
+ hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
} else {
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
}
/*
@@ -2018,10 +2036,9 @@ static void NCR5380_information_transfer
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 59/78] ncr5380: Fix autosense bugs
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (57 preceding siblings ...)
2016-01-03 5:05 ` [PATCH v4 58/78] ncr5380: Refactor command completion Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler Finn Thain
` (19 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-autosense-queue --]
[-- Type: text/plain, Size: 21702 bytes --]
NCR5380_information_transfer() may re-queue a command for autosense,
after calling scsi_eh_prep_cmnd(). This creates several possibilities:
1. Reselection may intervene before the re-queued command gets processed.
If the reconnected command then undergoes autosense, this causes the
scsi_eh_save data from the previous command to be overwritten.
2. After NCR5380_information_transfer() calls scsi_eh_prep_cmnd(),
a new REQUEST SENSE command may arrive. This would be queued ahead
of any command already undergoing autosense, which means the
scsi_eh_save data might be restored to the wrong command.
3. After NCR5380_information_transfer() calls scsi_eh_prep_cmnd(),
eh_abort_handler() may abort the command. But the scsi_eh_save data is
not discarded, which means the scsi_eh_save data might be incorrectly
restored to the next REQUEST SENSE command issued.
This patch adds a new autosense list so that commands that are re-queued
because of a CHECK CONDITION result can be kept apart from the REQUEST
SENSE commands that arrive via queuecommand.
This patch also adds a function dedicated to dequeueing and preparing the
next command for processing. By refactoring the main loop in this way,
scsi_eh_save takes place when an autosense command is dequeued rather
than when re-queued.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 194 +++++++++++++++++++---------------
drivers/scsi/NCR5380.h | 2
drivers/scsi/atari_NCR5380.c | 239 ++++++++++++++++++++++++-------------------
3 files changed, 249 insertions(+), 186 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:25.000000000 +1100
@@ -256,10 +256,12 @@ struct NCR5380_hostdata {
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
struct list_head unissued; /* waiting to be issued */
+ struct list_head autosense; /* priority issue queue */
struct list_head disconnected; /* waiting for reconnect */
spinlock_t lock; /* protects this struct */
int flags;
struct scsi_eh_save ses;
+ struct scsi_cmnd *sensing;
char info[256];
int read_overruns; /* number of bytes to cut from a
* transfer to handle chip overruns */
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:24.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:25.000000000 +1100
@@ -418,6 +418,9 @@ static inline void initialize_SCp(struct
cmd->SCp.ptr = NULL;
cmd->SCp.this_residual = 0;
}
+
+ cmd->SCp.Status = 0;
+ cmd->SCp.Message = 0;
}
/**
@@ -661,6 +664,8 @@ static int __init NCR5380_init(struct Sc
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
+ hostdata->sensing = NULL;
+ INIT_LIST_HEAD(&hostdata->autosense);
INIT_LIST_HEAD(&hostdata->unissued);
INIT_LIST_HEAD(&hostdata->disconnected);
@@ -777,6 +782,16 @@ static void complete_cmd(struct Scsi_Hos
dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+ if (hostdata->sensing == cmd) {
+ /* Autosense processing ends here */
+ if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ set_host_byte(cmd, DID_ERROR);
+ } else
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ hostdata->sensing = NULL;
+ }
+
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#else
@@ -868,12 +883,77 @@ static inline void maybe_release_dma_irq
/* Caller does the locking needed to set & test these data atomically */
if (list_empty(&hostdata->disconnected) &&
list_empty(&hostdata->unissued) &&
+ list_empty(&hostdata->autosense) &&
!hostdata->connected &&
!hostdata->retain_dma_intr)
NCR5380_release_dma_irq(instance);
}
/**
+ * dequeue_next_cmd - dequeue a command for processing
+ * @instance: the scsi host instance
+ *
+ * Priority is given to commands on the autosense queue. These commands
+ * need autosense because of a CHECK CONDITION result.
+ *
+ * Returns a command pointer if a command is found for a target that is
+ * not already busy. Otherwise returns NULL.
+ */
+
+static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *cmd;
+
+ if (list_empty(&hostdata->autosense)) {
+ list_for_each_entry(ncmd, &hostdata->unissued, list) {
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n",
+ cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun);
+
+ if (
+#ifdef SUPPORT_TAGS
+ !is_lun_busy(cmd, 1)
+#else
+ !(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))
+#endif
+ ) {
+ list_del(&ncmd->list);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from issue queue\n", cmd);
+ return cmd;
+ }
+ }
+ } else {
+ /* Autosense processing begins here */
+ ncmd = list_first_entry(&hostdata->autosense,
+ struct NCR5380_cmd, list);
+ list_del(&ncmd->list);
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from autosense queue\n", cmd);
+ scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+ hostdata->sensing = cmd;
+ return cmd;
+ }
+ return NULL;
+}
+
+static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ if (hostdata->sensing) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ list_add(&ncmd->list, &hostdata->autosense);
+ hostdata->sensing = NULL;
+ } else
+ list_add(&ncmd->list, &hostdata->unissued);
+}
+
+/**
* NCR5380_main - NCR state machines
*
* NCR5380_main is a coroutine that runs as long as more work can
@@ -889,7 +969,7 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct NCR5380_cmd *ncmd, *n;
+ struct scsi_cmnd *cmd;
int done;
/*
@@ -902,75 +982,46 @@ static void NCR5380_main(struct work_str
do {
done = 1;
- if (!hostdata->connected) {
- dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO);
- /*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
- */
- list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
- list) {
- struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
- u8 lun = tmp->device->lun;
-
- dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%d\n",
- tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)], lun);
- /* When we find one, remove it from the issue queue. */
- if (
-#ifdef SUPPORT_TAGS
- !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
-#else
- !(hostdata->busy[tmp->device->id] & (1 << lun))
-#endif
- ) {
- list_del(&ncmd->list);
- dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue\n",
- tmp);
+ while (!hostdata->connected &&
+ (cmd = dequeue_next_cmd(instance))) {
- hostdata->retain_dma_intr++;
+ dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd);
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
- /* ++roman: ...and the standard also requires that
- * REQUEST SENSE command are untagged.
- */
+ /*
+ * Attempt to establish an I_T_L nexus here.
+ * On success, instance->hostdata->connected is set.
+ * On failure, we must add the command back to the
+ * issue queue so we can keep trying.
+ */
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
+ */
+ /* ++roman: ...and the standard also requires that
+ * REQUEST SENSE command are untagged.
+ */
#ifdef SUPPORT_TAGS
- cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
+ cmd_get_tag(cmd, cmd->cmnd[0] != REQUEST_SENSE);
#endif
- if (!NCR5380_select(instance, tmp)) {
- /* OK or bad target */
- hostdata->retain_dma_intr--;
- maybe_release_dma_irq(instance);
- } else {
- /* Need to retry */
- list_add(&ncmd->list, &hostdata->unissued);
- dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: select() failed, %p returned to issue queue\n",
- tmp);
+ hostdata->retain_dma_intr++;
+ if (!NCR5380_select(instance, cmd)) {
+ dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n",
+ scmd_id(cmd), cmd);
+ hostdata->retain_dma_intr--;
+ maybe_release_dma_irq(instance);
+ } else {
+ hostdata->retain_dma_intr--;
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
+ "main: select failed, returning %p to queue\n", cmd);
+ requeue_cmd(instance, cmd);
#ifdef SUPPORT_TAGS
- cmd_free_tag(tmp);
+ cmd_free_tag(cmd);
#endif
- hostdata->retain_dma_intr--;
- done = 0;
- }
- if (hostdata->connected)
- break;
- } /* if target/lun/target queue is not busy */
- } /* for issue_queue */
- } /* if (!hostdata->connected) */
-
+ }
+ }
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dma_len
@@ -2002,48 +2053,21 @@ static void NCR5380_information_transfer
}
#endif
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way to
- * differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the
- * result code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
+ cmd->result &= ~0xffff;
+ cmd->result |= cmd->SCp.Status;
+ cmd->result |= cmd->SCp.Message << 8;
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-
- if ((cmd->cmnd[0] == REQUEST_SENSE) &&
- hostdata->ses.cmd_len) {
- scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- hostdata->ses.cmd_len = 0 ;
- }
-
- if ((cmd->cmnd[0] != REQUEST_SENSE) &&
- (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
-
- list_add(&ncmd->list, &hostdata->unissued);
- dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
- instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
- cmd);
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- } else {
+ if (cmd->cmnd[0] == REQUEST_SENSE)
complete_cmd(instance, cmd);
+ else {
+ if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
+ cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+ dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
+ cmd);
+ list_add_tail(&ncmd->list,
+ &hostdata->autosense);
+ } else
+ complete_cmd(instance, cmd);
}
/*
@@ -2533,6 +2557,15 @@ static int NCR5380_bus_reset(struct scsi
dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
hostdata->connected = NULL;
+ if (hostdata->sensing) {
+ complete_cmd(instance, hostdata->sensing);
+ hostdata->sensing = NULL;
+ }
+
+ if (!list_empty(&hostdata->autosense))
+ dsprintk(NDEBUG_ABORT, instance, "reset aborted autosense list\n");
+ INIT_LIST_HEAD(&hostdata->autosense);
+
if (!list_empty(&hostdata->unissued))
dsprintk(NDEBUG_ABORT, instance, "reset aborted unissued list\n");
INIT_LIST_HEAD(&hostdata->unissued);
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:24.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:25.000000000 +1100
@@ -244,6 +244,9 @@ static inline void initialize_SCp(struct
cmd->SCp.ptr = NULL;
cmd->SCp.this_residual = 0;
}
+
+ cmd->SCp.Status = 0;
+ cmd->SCp.Message = 0;
}
/**
@@ -622,6 +625,8 @@ static int NCR5380_init(struct Scsi_Host
#endif
spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
+ hostdata->sensing = NULL;
+ INIT_LIST_HEAD(&hostdata->autosense);
INIT_LIST_HEAD(&hostdata->unissued);
INIT_LIST_HEAD(&hostdata->disconnected);
@@ -738,6 +743,16 @@ static void complete_cmd(struct Scsi_Hos
dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+ if (hostdata->sensing == cmd) {
+ /* Autosense processing ends here */
+ if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ set_host_byte(cmd, DID_ERROR);
+ } else
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ hostdata->sensing = NULL;
+ }
+
hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
cmd->scsi_done(cmd);
@@ -798,6 +813,64 @@ static int NCR5380_queue_command(struct
}
/**
+ * dequeue_next_cmd - dequeue a command for processing
+ * @instance: the scsi host instance
+ *
+ * Priority is given to commands on the autosense queue. These commands
+ * need autosense because of a CHECK CONDITION result.
+ *
+ * Returns a command pointer if a command is found for a target that is
+ * not already busy. Otherwise returns NULL.
+ */
+
+static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *cmd;
+
+ if (list_empty(&hostdata->autosense)) {
+ list_for_each_entry(ncmd, &hostdata->unissued, list) {
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n",
+ cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun);
+
+ if (!(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))) {
+ list_del(&ncmd->list);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from issue queue\n", cmd);
+ return cmd;
+ }
+ }
+ } else {
+ /* Autosense processing begins here */
+ ncmd = list_first_entry(&hostdata->autosense,
+ struct NCR5380_cmd, list);
+ list_del(&ncmd->list);
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from autosense queue\n", cmd);
+ scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+ hostdata->sensing = cmd;
+ return cmd;
+ }
+ return NULL;
+}
+
+static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ if (hostdata->sensing) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ list_add(&ncmd->list, &hostdata->autosense);
+ hostdata->sensing = NULL;
+ } else
+ list_add(&ncmd->list, &hostdata->unissued);
+}
+
+/**
* NCR5380_main - NCR state machines
*
* NCR5380_main is a coroutine that runs as long as more work can
@@ -814,63 +887,40 @@ static void NCR5380_main(struct work_str
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct NCR5380_cmd *ncmd, *n;
+ struct scsi_cmnd *cmd;
int done;
spin_lock_irq(&hostdata->lock);
do {
done = 1;
- if (!hostdata->connected) {
- dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no);
+ while (!hostdata->connected &&
+ (cmd = dequeue_next_cmd(instance))) {
+
+ dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd);
+
/*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
+ * Attempt to establish an I_T_L nexus here.
+ * On success, instance->hostdata->connected is set.
+ * On failure, we must add the command back to the
+ * issue queue so we can keep trying.
+ */
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
*/
- list_for_each_entry_safe(ncmd, n, &hostdata->unissued,
- list) {
- struct scsi_cmnd *tmp = NCR5380_to_scmd(ncmd);
-
- dsprintk(NDEBUG_QUEUES, instance, "main: tmp=%p target=%d busy=%d lun=%llu\n",
- tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
- tmp->device->lun);
- /* When we find one, remove it from the issue queue. */
- if (!(hostdata->busy[tmp->device->id] &
- (1 << (u8)(tmp->device->lun & 0xff)))) {
- list_del(&ncmd->list);
- dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: removed %p from issue queue\n",
- tmp);
-
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
-
- if (!NCR5380_select(instance, tmp)) {
- /* OK or bad target */
- } else {
- /* Need to retry */
- list_add(&ncmd->list, &hostdata->unissued);
- dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES,
- instance, "main: select() failed, %p returned to issue queue\n",
- tmp);
- done = 0;
- }
- if (hostdata->connected)
- break;
- } /* if target/lun is not busy */
- } /* for */
- } /* if (!hostdata->connected) */
+ if (!NCR5380_select(instance, cmd)) {
+ dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n",
+ scmd_id(cmd), cmd);
+ } else {
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
+ "main: select failed, returning %p to queue\n", cmd);
+ requeue_cmd(instance, cmd);
+ }
+ }
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dmalen
@@ -1853,43 +1903,21 @@ static void NCR5380_information_transfer
hostdata->connected = NULL;
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way
- * to differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the result
- * code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
-
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-
- if ((cmd->cmnd[0] == REQUEST_SENSE) &&
- hostdata->ses.cmd_len) {
- scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- hostdata->ses.cmd_len = 0 ;
- }
-
- if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+ cmd->result &= ~0xffff;
+ cmd->result |= cmd->SCp.Status;
+ cmd->result |= cmd->SCp.Message << 8;
- list_add(&ncmd->list, &hostdata->unissued);
- dsprintk(NDEBUG_AUTOSENSE | NDEBUG_QUEUES,
- instance, "REQUEST SENSE cmd %p added to head of issue queue\n",
- cmd);
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
- } else {
+ if (cmd->cmnd[0] == REQUEST_SENSE)
complete_cmd(instance, cmd);
+ else {
+ if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
+ cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+ dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
+ cmd);
+ list_add_tail(&ncmd->list,
+ &hostdata->autosense);
+ } else
+ complete_cmd(instance, cmd);
}
/*
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (58 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 59/78] ncr5380: Fix autosense bugs Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection Finn Thain
` (18 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-new-eh_abort_handler --]
[-- Type: text/plain, Size: 12622 bytes --]
Introduce a new eh_abort_handler implementation. This one attempts to
follow all of the rules relating to EH handlers. There is still a known
bug: during selection, a command becomes invisible to the EH handlers
because it only appears in a pointer on the stack of a different thread.
This bug is addressed in a subsequent patch.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 155 ++++++++++++++++++++++++++++++++++++++----
drivers/scsi/atari_NCR5380.c | 157 ++++++++++++++++++++++++++++++++++++++-----
2 files changed, 282 insertions(+), 30 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:25.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:28.000000000 +1100
@@ -2480,41 +2480,168 @@ static void NCR5380_reselect(struct Scsi
}
-/*
- * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
+/**
+ * list_find_cmd - test for presence of a command in a linked list
+ * @haystack: list of commands
+ * @needle: command to search for
+ */
+
+static bool list_find_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ struct NCR5380_cmd *ncmd;
+
+ list_for_each_entry(ncmd, haystack, list)
+ if (NCR5380_to_scmd(ncmd) == needle)
+ return true;
+ return false;
+}
+
+/**
+ * list_remove_cmd - remove a command from linked list
+ * @haystack: list of commands
+ * @needle: command to remove
+ */
+
+static bool list_del_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ if (list_find_cmd(haystack, needle)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle);
+
+ list_del(&ncmd->list);
+ return true;
+ }
+ return false;
+}
+
+/**
+ * NCR5380_abort - scsi host eh_abort_handler() method
+ * @cmd: the command to be aborted
*
- * Purpose : abort a command
+ * Try to abort a given command by removing it from queues and/or sending
+ * the target an abort message. This may not succeed in causing a target
+ * to abort the command. Nonetheless, the low-level driver must forget about
+ * the command because the mid-layer reclaims it and it may be re-issued.
*
- * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
- * used.
+ * The normal path taken by a command is as follows. For EH we trace this
+ * same path to locate and abort the command.
*
- * Returns : SUCCESS - success, FAILED on failure.
+ * unissued -> selecting -> [unissued -> selecting ->]... connected ->
+ * [disconnected -> connected ->]...
+ * [autosense -> connected ->] done
*
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
- * a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
+ * If cmd is unissued then just remove it.
+ * If cmd is disconnected, try to select the target.
+ * If cmd is connected, try to send an abort message.
+ * If cmd is waiting for autosense, give it a chance to complete but check
+ * that it isn't left connected.
+ * If cmd was not found at all then presumably it has already been completed,
+ * in which case return SUCCESS to try to avoid further EH measures.
+ * If the command has not completed yet, we must not fail to find it.
*/
-static
-int NCR5380_abort(struct scsi_cmnd *cmd)
+static int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long flags;
+ int result = SUCCESS;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "aborting command\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
+ if (list_del_cmd(&hostdata->unissued, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from issue queue\n", cmd);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
+ }
+
+ if (list_del_cmd(&hostdata->disconnected, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from disconnected list\n", cmd);
+ cmd->result = DID_ERROR << 16;
+ if (!hostdata->connected)
+ NCR5380_select(instance, cmd);
+ if (hostdata->connected != cmd) {
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ }
+
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ /* Perform autosense for this command */
+ list_add(&ncmd->list, &hostdata->autosense);
+ }
+ }
+
+ if (list_find_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: found %p on sense queue\n", cmd);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ msleep(1000);
+ spin_lock_irqsave(&hostdata->lock, flags);
+ if (list_del_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from sense queue\n", cmd);
+ set_host_byte(cmd, DID_ABORT);
+ complete_cmd(instance, cmd);
+ goto out;
+ }
+ }
+
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ complete_cmd(instance, cmd);
+ }
+
+out:
+ if (result == FAILED)
+ dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
+ else
+ dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
- return FAILED;
+ return result;
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:25.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:28.000000000 +1100
@@ -2269,23 +2269,65 @@ static void NCR5380_dma_complete(NCR5380
}
#endif /* def REAL_DMA */
-/*
- * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
- *
- * Purpose : abort a command
+/**
+ * list_find_cmd - test for presence of a command in a linked list
+ * @haystack: list of commands
+ * @needle: command to search for
+ */
+
+static bool list_find_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ struct NCR5380_cmd *ncmd;
+
+ list_for_each_entry(ncmd, haystack, list)
+ if (NCR5380_to_scmd(ncmd) == needle)
+ return true;
+ return false;
+}
+
+/**
+ * list_remove_cmd - remove a command from linked list
+ * @haystack: list of commands
+ * @needle: command to remove
+ */
+
+static bool list_del_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ if (list_find_cmd(haystack, needle)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle);
+
+ list_del(&ncmd->list);
+ return true;
+ }
+ return false;
+}
+
+/**
+ * NCR5380_abort - scsi host eh_abort_handler() method
+ * @cmd: the command to be aborted
*
- * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
- * used.
+ * Try to abort a given command by removing it from queues and/or sending
+ * the target an abort message. This may not succeed in causing a target
+ * to abort the command. Nonetheless, the low-level driver must forget about
+ * the command because the mid-layer reclaims it and it may be re-issued.
*
- * Returns : SUCCESS - success, FAILED on failure.
+ * The normal path taken by a command is as follows. For EH we trace this
+ * same path to locate and abort the command.
*
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
- * a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
+ * unissued -> selecting -> [unissued -> selecting ->]... connected ->
+ * [disconnected -> connected ->]...
+ * [autosense -> connected ->] done
*
- * Locks: host lock taken by caller
+ * If cmd is unissued then just remove it.
+ * If cmd is disconnected, try to select the target.
+ * If cmd is connected, try to send an abort message.
+ * If cmd is waiting for autosense, give it a chance to complete but check
+ * that it isn't left connected.
+ * If cmd was not found at all then presumably it has already been completed,
+ * in which case return SUCCESS to try to avoid further EH measures.
+ * If the command has not completed yet, we must not fail to find it.
*/
static int NCR5380_abort(struct scsi_cmnd *cmd)
@@ -2293,18 +2335,101 @@ static int NCR5380_abort(struct scsi_cmn
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long flags;
+ int result = SUCCESS;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "aborting command\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
+ if (list_del_cmd(&hostdata->unissued, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from issue queue\n", cmd);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
+ }
+
+ if (list_del_cmd(&hostdata->disconnected, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from disconnected list\n", cmd);
+ cmd->result = DID_ERROR << 16;
+ if (!hostdata->connected)
+ NCR5380_select(instance, cmd);
+ if (hostdata->connected != cmd) {
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ }
+
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ /* Perform autosense for this command */
+ list_add(&ncmd->list, &hostdata->autosense);
+ }
+ }
+
+ if (list_find_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: found %p on sense queue\n", cmd);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ msleep(1000);
+ spin_lock_irqsave(&hostdata->lock, flags);
+ if (list_del_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from sense queue\n", cmd);
+ set_host_byte(cmd, DID_ABORT);
+ complete_cmd(instance, cmd);
+ goto out;
+ }
+ }
+
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ complete_cmd(instance, cmd);
+ }
+
+out:
+ if (result == FAILED)
+ dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
+ else
+ dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+
+ queue_work(hostdata->work_q, &hostdata->main_task);
spin_unlock_irqrestore(&hostdata->lock, flags);
- return FAILED;
+ return result;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (59 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 60/78] ncr5380: Implement new eh_abort_handler Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler Finn Thain
` (17 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-fix-abort-during-select --]
[-- Type: text/plain, Size: 15048 bytes --]
During arbitration and selection, the relevant command is invisible to
exception handlers and can be found only in a pointer on the stack of a
different thread.
When eh_abort_handler can't find a given command, it can't decide whether
that command was completed already or is still in arbitration or selection
phase. But it must return either SUCCESS (e.g. command completed earlier)
or FAILED (could not abort the nexus, try bus reset).
The solution is to make sure all commands belonging to the LLD are always
visible to exception handlers. Add another scsi_cmnd pointer to the
hostdata struct to track the command in arbitration or selection phase.
Replace 'retain_dma_irq' with the new 'selecting' pointer, to bring
atari_NCR5380.c into line with NCR5380.c.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 76 +++++++++++++++++++++++++++++----------
drivers/scsi/NCR5380.h | 4 +-
drivers/scsi/atari_NCR5380.c | 82 +++++++++++++++++++++++++++++++------------
3 files changed, 119 insertions(+), 43 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:28.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:30.000000000 +1100
@@ -912,9 +912,9 @@ static void NCR5380_main(struct work_str
* entire unit.
*/
- if (!NCR5380_select(instance, cmd)) {
- dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n",
- scmd_id(cmd), cmd);
+ cmd = NCR5380_select(instance, cmd);
+ if (!cmd) {
+ dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
} else {
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
"main: select failed, returning %p to queue\n", cmd);
@@ -1061,9 +1061,9 @@ static irqreturn_t NCR5380_intr(int irq,
* Inputs : instance - instantiation of the 5380 driver on which this
* target lives, cmd - SCSI command to execute.
*
- * Returns : -1 if selection failed but should be retried.
- * 0 if selection failed and should not be retried.
- * 0 if selection succeeded completely (hostdata->connected == cmd).
+ * Returns cmd if selection failed but should be retried,
+ * NULL if selection failed and should not be retried, or
+ * NULL if selection succeeded (hostdata->connected == cmd).
*
* Side effects :
* If bus busy, arbitration failed, etc, NCR5380_select() will exit
@@ -1081,7 +1081,8 @@ static irqreturn_t NCR5380_intr(int irq,
* Locks: caller holds hostdata lock in IRQ mode
*/
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
@@ -1092,6 +1093,15 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
+ /*
+ * Arbitration and selection phases are slow and involve dropping the
+ * lock, so we have to watch out for EH. An exception handler may
+ * change 'selecting' to NULL. This function will then return NULL
+ * so that the caller will forget about 'cmd'. (During information
+ * transfer phases, EH may change 'connected' to NULL.)
+ */
+ hostdata->selecting = cmd;
+
/*
* Set the phase bits to 0, otherwise the NCR5380 won't drive the
* data bus during SELECTION.
@@ -1117,13 +1127,13 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
/* Reselection interrupt */
- return -1;
+ goto out;
}
if (err < 0) {
NCR5380_write(MODE_REG, MR_BASE);
shost_printk(KERN_ERR, instance,
"select: arbitration timeout\n");
- return -1;
+ goto out;
}
spin_unlock_irq(&hostdata->lock);
@@ -1135,7 +1145,7 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(MODE_REG, MR_BASE);
dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
spin_lock_irq(&hostdata->lock);
- return -1;
+ goto out;
}
/* After/during arbitration, BSY should be asserted.
@@ -1159,7 +1169,13 @@ static int NCR5380_select(struct Scsi_Ho
/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
- return -1;
+ goto out;
+
+ if (!hostdata->selecting) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ goto out;
+ }
dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
@@ -1232,18 +1248,21 @@ static int NCR5380_select(struct Scsi_Ho
if (!hostdata->connected)
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
- return -1;
+ goto out;
}
if (err < 0) {
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->result = DID_BAD_TARGET << 16;
- complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n",
- instance->host_no);
- return 0;
+ /* Can't touch cmd if it has been reclaimed by the scsi ML */
+ if (hostdata->selecting) {
+ cmd->result = DID_BAD_TARGET << 16;
+ complete_cmd(instance, cmd);
+ dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
+ cmd = NULL;
+ }
+ goto out;
}
/*
@@ -1279,7 +1298,11 @@ static int NCR5380_select(struct Scsi_Ho
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
+ goto out;
+ }
+ if (!hostdata->selecting) {
+ do_abort(instance);
+ goto out;
}
dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
@@ -1300,7 +1323,13 @@ static int NCR5380_select(struct Scsi_Ho
initialize_SCp(cmd);
- return 0;
+ cmd = NULL;
+
+out:
+ if (!hostdata->selecting)
+ return NULL;
+ hostdata->selecting = NULL;
+ return cmd;
}
/*
@@ -2352,6 +2381,15 @@ static int NCR5380_abort(struct scsi_cmn
cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
}
+ if (hostdata->selecting == cmd) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: cmd %p == selecting\n", cmd);
+ hostdata->selecting = NULL;
+ cmd->result = DID_ABORT << 16;
+ complete_cmd(instance, cmd);
+ goto out;
+ }
+
if (list_del_cmd(&hostdata->disconnected, cmd)) {
dsprintk(NDEBUG_ABORT, instance,
"abort: removed %p from disconnected list\n", cmd);
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:25.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:30.000000000 +1100
@@ -255,6 +255,7 @@ struct NCR5380_hostdata {
#endif
unsigned char last_message; /* last message OUT */
struct scsi_cmnd *connected; /* currently connected cmnd */
+ struct scsi_cmnd *selecting; /* cmnd to be connected */
struct list_head unissued; /* waiting to be issued */
struct list_head autosense; /* priority issue queue */
struct list_head disconnected; /* waiting for reconnect */
@@ -265,7 +266,6 @@ struct NCR5380_hostdata {
char info[256];
int read_overruns; /* number of bytes to cut from a
* transfer to handle chip overruns */
- int retain_dma_intr;
struct work_struct main_task;
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
@@ -329,7 +329,7 @@ static irqreturn_t NCR5380_intr(int irq,
static void NCR5380_main(struct work_struct *work);
static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd);
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#endif
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:28.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:30.000000000 +1100
@@ -885,7 +885,7 @@ static inline void maybe_release_dma_irq
list_empty(&hostdata->unissued) &&
list_empty(&hostdata->autosense) &&
!hostdata->connected &&
- !hostdata->retain_dma_intr)
+ !hostdata->selecting)
NCR5380_release_dma_irq(instance);
}
@@ -1006,14 +1006,11 @@ static void NCR5380_main(struct work_str
#ifdef SUPPORT_TAGS
cmd_get_tag(cmd, cmd->cmnd[0] != REQUEST_SENSE);
#endif
- hostdata->retain_dma_intr++;
- if (!NCR5380_select(instance, cmd)) {
- dsprintk(NDEBUG_MAIN, instance, "main: selected target %d for command %p\n",
- scmd_id(cmd), cmd);
- hostdata->retain_dma_intr--;
+ cmd = NCR5380_select(instance, cmd);
+ if (!cmd) {
+ dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
maybe_release_dma_irq(instance);
} else {
- hostdata->retain_dma_intr--;
dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
"main: select failed, returning %p to queue\n", cmd);
requeue_cmd(instance, cmd);
@@ -1241,9 +1238,9 @@ static irqreturn_t NCR5380_intr(int irq,
* Inputs : instance - instantiation of the 5380 driver on which this
* target lives, cmd - SCSI command to execute.
*
- * Returns : -1 if selection failed but should be retried.
- * 0 if selection failed and should not be retried.
- * 0 if selection succeeded completely (hostdata->connected == cmd).
+ * Returns cmd if selection failed but should be retried,
+ * NULL if selection failed and should not be retried, or
+ * NULL if selection succeeded (hostdata->connected == cmd).
*
* Side effects :
* If bus busy, arbitration failed, etc, NCR5380_select() will exit
@@ -1259,7 +1256,8 @@ static irqreturn_t NCR5380_intr(int irq,
* cmd->result host byte set to DID_BAD_TARGET.
*/
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
@@ -1272,6 +1270,15 @@ static int NCR5380_select(struct Scsi_Ho
instance->this_id);
/*
+ * Arbitration and selection phases are slow and involve dropping the
+ * lock, so we have to watch out for EH. An exception handler may
+ * change 'selecting' to NULL. This function will then return NULL
+ * so that the caller will forget about 'cmd'. (During information
+ * transfer phases, EH may change 'connected' to NULL.)
+ */
+ hostdata->selecting = cmd;
+
+ /*
* Set the phase bits to 0, otherwise the NCR5380 won't drive the
* data bus during SELECTION.
*/
@@ -1296,13 +1303,13 @@ static int NCR5380_select(struct Scsi_Ho
spin_lock_irq(&hostdata->lock);
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
/* Reselection interrupt */
- return -1;
+ goto out;
}
if (err < 0) {
NCR5380_write(MODE_REG, MR_BASE);
shost_printk(KERN_ERR, instance,
"select: arbitration timeout\n");
- return -1;
+ goto out;
}
spin_unlock_irq(&hostdata->lock);
@@ -1317,7 +1324,7 @@ static int NCR5380_select(struct Scsi_Ho
dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
HOSTNO);
spin_lock_irq(&hostdata->lock);
- return -1;
+ goto out;
}
/* After/during arbitration, BSY should be asserted.
@@ -1341,7 +1348,13 @@ static int NCR5380_select(struct Scsi_Ho
/* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
- return -1;
+ goto out;
+
+ if (!hostdata->selecting) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ goto out;
+ }
dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
@@ -1417,17 +1430,21 @@ static int NCR5380_select(struct Scsi_Ho
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
printk(KERN_ERR "scsi%d: reselection after won arbitration?\n",
HOSTNO);
- return -1;
+ goto out;
}
if (err < 0) {
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->result = DID_BAD_TARGET << 16;
- complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
- return 0;
+ /* Can't touch cmd if it has been reclaimed by the scsi ML */
+ if (hostdata->selecting) {
+ cmd->result = DID_BAD_TARGET << 16;
+ complete_cmd(instance, cmd);
+ dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
+ cmd = NULL;
+ }
+ goto out;
}
/*
@@ -1463,7 +1480,11 @@ static int NCR5380_select(struct Scsi_Ho
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
+ goto out;
+ }
+ if (!hostdata->selecting) {
+ do_abort(instance);
+ goto out;
}
dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
@@ -1499,7 +1520,13 @@ static int NCR5380_select(struct Scsi_Ho
initialize_SCp(cmd);
- return 0;
+ cmd = NULL;
+
+out:
+ if (!hostdata->selecting)
+ return NULL;
+ hostdata->selecting = NULL;
+ return cmd;
}
/*
@@ -2563,6 +2590,15 @@ static int NCR5380_abort(struct scsi_cmn
cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
}
+ if (hostdata->selecting == cmd) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: cmd %p == selecting\n", cmd);
+ hostdata->selecting = NULL;
+ cmd->result = DID_ABORT << 16;
+ complete_cmd(instance, cmd);
+ goto out;
+ }
+
if (list_del_cmd(&hostdata->disconnected, cmd)) {
dsprintk(NDEBUG_ABORT, instance,
"abort: removed %p from disconnected list\n", cmd);
@@ -2680,6 +2716,8 @@ static int NCR5380_bus_reset(struct scsi
* commands!
*/
+ hostdata->selecting = NULL;
+
if (hostdata->connected)
dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
hostdata->connected = NULL;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (60 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 61/78] ncr5380: Fix EH during arbitration and selection Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
` (16 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-new-eh_bus_reset_handler --]
[-- Type: text/plain, Size: 5177 bytes --]
NCR5380.c lacks a sane eh_bus_reset_handler. The atari_NCR5380.c code is
much better but it should not throw out the issue queue (that would be
a host reset) and it neglects to set the result code for commands that it
throws out. Fix these bugs and keep the two core drivers in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 50 ++++++++++++++++++++++++++++++++++++++++++-
drivers/scsi/atari_NCR5380.c | 39 +++++++++++++++++++--------------
2 files changed, 72 insertions(+), 17 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:32.000000000 +1100
@@ -2694,11 +2694,12 @@ static int NCR5380_bus_reset(struct scsi
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
+ struct NCR5380_cmd *ncmd;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2718,27 +2719,32 @@ static int NCR5380_bus_reset(struct scsi
hostdata->selecting = NULL;
- if (hostdata->connected)
- dsprintk(NDEBUG_ABORT, instance, "reset aborted a connected command\n");
- hostdata->connected = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
complete_cmd(instance, hostdata->sensing);
hostdata->sensing = NULL;
}
- if (!list_empty(&hostdata->autosense))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted autosense list\n");
- INIT_LIST_HEAD(&hostdata->autosense);
-
- if (!list_empty(&hostdata->unissued))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted unissued list\n");
- INIT_LIST_HEAD(&hostdata->unissued);
-
- if (!list_empty(&hostdata->disconnected))
- dsprintk(NDEBUG_ABORT, instance, "reset aborted disconnected list\n");
- INIT_LIST_HEAD(&hostdata->disconnected);
-
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
@@ -2748,6 +2754,7 @@ static int NCR5380_bus_reset(struct scsi
hostdata->dma_len = 0;
#endif
+ queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
spin_unlock_irqrestore(&hostdata->lock, flags);
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:32.000000000 +1100
@@ -2482,18 +2482,66 @@ static int NCR5380_bus_reset(struct scsi
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int i;
unsigned long flags;
+ struct NCR5380_cmd *ncmd;
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, "performing bus reset\n");
+ scmd_printk(KERN_INFO, cmd, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
do_reset(instance);
+ /* reset NCR registers */
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+
+ /* After the reset, there are no more connected or disconnected commands
+ * and no busy units; so clear the low-level status here to avoid
+ * conflicts when the mid-level code tries to wake up the affected
+ * commands!
+ */
+
+ hostdata->selecting = NULL;
+
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
+
+ if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->sensing);
+ hostdata->sensing = NULL;
+ }
+
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+
+ queue_work(hostdata->work_q, &hostdata->main_task);
spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (61 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 62/78] ncr5380: Implement new eh_bus_reset_handler Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
` (15 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-remove-HOSTNO-printk --]
[-- Type: text/plain, Size: 6258 bytes --]
Remove the HOSTNO macro that is peculiar to atari_NCR5380.c and
contributes to the problem of divergence of the NCR5380 core drivers.
Keep NCR5380.c in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 17 +++++++++--------
drivers/scsi/atari_NCR5380.c | 23 +++++++++--------------
2 files changed, 18 insertions(+), 22 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:32.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:33.000000000 +1100
@@ -569,12 +569,12 @@ static void NCR5380_print_phase(struct S
status = NCR5380_read(STATUS_REG);
if (!(status & SR_REQ))
- printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
+ shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
(phases[i].value != (status & PHASE_MASK)); ++i)
;
- printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
+ shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
@@ -1428,8 +1428,7 @@ static struct scsi_cmnd *NCR5380_select(
NCR5380_reselect(instance);
if (!hostdata->connected)
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- printk(KERN_ERR "scsi%d: reselection after won arbitration?\n",
- HOSTNO);
+ shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
goto out;
}
@@ -1957,8 +1956,7 @@ static void NCR5380_information_transfer
switch (phase) {
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT "
- "aborted\n", HOSTNO);
+ shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
@@ -2219,13 +2217,11 @@ static void NCR5380_information_transfer
tmp = 0;
}
} else if (len) {
- printk(KERN_NOTICE "scsi%d: error receiving "
- "extended message\n", HOSTNO);
+ shost_printk(KERN_ERR, instance, "error receiving extended message\n");
tmp = 0;
} else {
- printk(KERN_NOTICE "scsi%d: extended message "
- "code %02x length %d is too long\n",
- HOSTNO, extended_msg[2], extended_msg[1]);
+ shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",
+ extended_msg[2], extended_msg[1]);
tmp = 0;
}
@@ -2241,8 +2237,7 @@ static void NCR5380_information_transfer
*/
default:
if (!tmp) {
- printk(KERN_INFO "scsi%d: rejecting message ",
- instance->host_no);
+ shost_printk(KERN_ERR, instance, "rejecting message ");
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
@@ -2291,7 +2286,7 @@ static void NCR5380_information_transfer
cmd->SCp.Status = tmp;
break;
default:
- printk("scsi%d: unknown phase\n", HOSTNO);
+ shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
} else {
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:32.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:33.000000000 +1100
@@ -418,10 +418,10 @@ static void NCR5380_print_phase(struct S
status = NCR5380_read(STATUS_REG);
if (!(status & SR_REQ))
- printk("scsi%d : REQ not asserted, phase unknown.\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
- printk("scsi%d : phase %s\n", instance->host_no, phases[i].name);
+ shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
#endif
@@ -1247,7 +1247,7 @@ static struct scsi_cmnd *NCR5380_select(
NCR5380_reselect(instance);
if (!hostdata->connected)
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
goto out;
}
@@ -1852,7 +1852,7 @@ static void NCR5380_information_transfer
switch (phase) {
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
@@ -2053,10 +2053,11 @@ static void NCR5380_information_transfer
tmp = 0;
}
} else if (len) {
- printk("scsi%d: error receiving extended message\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "error receiving extended message\n");
tmp = 0;
} else {
- printk("scsi%d: extended message code %02x length %d is too long\n", instance->host_no, extended_msg[2], extended_msg[1]);
+ shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",
+ extended_msg[2], extended_msg[1]);
tmp = 0;
}
@@ -2072,7 +2073,7 @@ static void NCR5380_information_transfer
*/
default:
if (!tmp) {
- printk("scsi%d: rejecting message ", instance->host_no);
+ shost_printk(KERN_ERR, instance, "rejecting message ");
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
@@ -2118,7 +2119,7 @@ static void NCR5380_information_transfer
cmd->SCp.Status = tmp;
break;
default:
- printk("scsi%d : unknown phase\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
} else {
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (62 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 63/78] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
` (14 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-remove-HOSTNO-dprintk --]
[-- Type: text/plain, Size: 22400 bytes --]
Keep the two core driver forks in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 71 +++++++++++++++--------------
drivers/scsi/atari_NCR5380.c | 102 +++++++++++++++++++------------------------
2 files changed, 84 insertions(+), 89 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:33.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:34.000000000 +1100
@@ -175,8 +175,6 @@
* possible) function may be used.
*/
-#define HOSTNO instance->host_no
-
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
@@ -1024,10 +1022,8 @@ static void NCR5380_main(struct work_str
&& !hostdata->dma_len
#endif
) {
- dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
- HOSTNO);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
done = 0;
}
} while (!done);
@@ -1064,7 +1060,7 @@ static void NCR5380_dma_complete(struct
(BASR_PHASE_MATCH|BASR_ACK)) {
saved_data = NCR5380_read(INPUT_DATA_REG);
overrun = 1;
- dprintk(NDEBUG_DMA, "scsi%d: read overrun handled\n", HOSTNO);
+ dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
}
}
}
@@ -1169,8 +1165,8 @@ static irqreturn_t NCR5380_intr(int irq,
unsigned char mr = NCR5380_read(MODE_REG);
unsigned char sr = NCR5380_read(STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
- HOSTNO, irq, basr, sr, mr);
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
@@ -1179,7 +1175,7 @@ static irqreturn_t NCR5380_intr(int irq,
* for End of DMA errata need to happen in DMA Mode.
*/
- dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
if (hostdata->connected) {
NCR5380_dma_complete(instance);
@@ -1196,8 +1192,7 @@ static irqreturn_t NCR5380_intr(int irq,
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
- HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
if (!hostdata->connected) {
NCR5380_reselect(instance);
@@ -1209,7 +1204,7 @@ static irqreturn_t NCR5380_intr(int irq,
/* Probably Bus Reset */
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", HOSTNO);
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
@@ -1266,8 +1261,8 @@ static struct scsi_cmnd *NCR5380_select(
int err;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
- instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
/*
* Arbitration and selection phases are slow and involve dropping the
@@ -1321,8 +1316,7 @@ static struct scsi_cmnd *NCR5380_select(
(NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
- HOSTNO);
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
goto out;
}
@@ -1356,7 +1350,7 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
/*
* Now that we have won arbitration, start Selection process, asserting
@@ -1412,7 +1406,7 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
/*
* The SCSI specification calls for a 250 ms timeout for the actual
@@ -1486,8 +1480,8 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
- HOSTNO, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(1, cmd->device->lun);
#ifdef SUPPORT_TAGS
@@ -1506,7 +1500,7 @@ static struct scsi_cmnd *NCR5380_select(
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
hostdata->connected = cmd;
@@ -1578,11 +1572,11 @@ static int NCR5380_transfer_pio(struct S
if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
- dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
@@ -1624,7 +1618,7 @@ static int NCR5380_transfer_pio(struct S
STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
* We have several special cases to consider during REQ/ACK handshaking :
@@ -1645,7 +1639,7 @@ static int NCR5380_transfer_pio(struct S
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
@@ -1791,9 +1785,8 @@ static int NCR5380_transfer_dma(struct S
}
hostdata->dma_len = c;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- instance->host_no, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", *data);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
/* netbsd turns off ints here, why not be safe and do it too */
@@ -1829,9 +1822,8 @@ static int NCR5380_transfer_dma(struct S
if (hostdata->read_overruns && (p & SR_IO))
c -= hostdata->read_overruns;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- HOSTNO, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", d);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, d);
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
@@ -1978,9 +1970,9 @@ static void NCR5380_information_transfer
* they are at contiguous physical addresses.
*/
merge_contiguous_buffers(cmd);
- dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
- HOSTNO, cmd->SCp.this_residual,
- cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
/*
@@ -2068,11 +2060,12 @@ static void NCR5380_information_transfer
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
- "QUEUE_FULL after %d commands\n",
- HOSTNO, cmd->device->id, cmd->device->lun,
- ta->nr_allocated);
+ u8 lun = cmd->device->lun;
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
+
+ dsprintk(NDEBUG_TAGS, instance,
+ "QUEUE_FULL %p target %d lun %d nr_allocated %d\n",
+ cmd, scmd_id(cmd), lun, ta->nr_allocated);
if (ta->queue_size > ta->nr_allocated)
ta->queue_size = ta->nr_allocated;
}
@@ -2126,10 +2119,8 @@ static void NCR5380_information_transfer
cmd->device->tagged_supported = 0;
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
cmd->tag = TAG_NONE;
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu rejected "
- "QUEUE_TAG message; tagged queuing "
- "disabled\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %llu rejected QUEUE_TAG message; tagged queuing disabled\n",
+ scmd_id(cmd), cmd->device->lun);
break;
}
break;
@@ -2188,14 +2179,15 @@ static void NCR5380_information_transfer
spin_unlock_irq(&hostdata->lock);
- dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
- (int)extended_msg[1], (int)extended_msg[2]);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
if (!len && extended_msg[1] > 0 &&
extended_msg[1] <= sizeof(extended_msg) - 2) {
@@ -2206,8 +2198,8 @@ static void NCR5380_information_transfer
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
- HOSTNO, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2335,7 +2327,7 @@ static void NCR5380_reselect(struct Scsi
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2405,8 +2397,8 @@ static void NCR5380_reselect(struct Scsi
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
- "reselection\n", HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n",
+ target_mask, lun, tag);
}
#endif
@@ -2491,14 +2483,14 @@ static void NCR5380_reselect(struct Scsi
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n"
- HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n"
+ target_mask, lun, tag);
}
#endif
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
- HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:33.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:34.000000000 +1100
@@ -926,9 +926,8 @@ static void NCR5380_main(struct work_str
&& !hostdata->dmalen
#endif
) {
- dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no);
done = 0;
}
} while (!done);
@@ -986,8 +985,8 @@ static irqreturn_t NCR5380_intr(int irq,
unsigned char mr = NCR5380_read(MODE_REG);
unsigned char sr = NCR5380_read(STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
- instance->host_no, irq, basr, sr, mr);
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
#if defined(REAL_DMA)
if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
@@ -996,7 +995,7 @@ static irqreturn_t NCR5380_intr(int irq,
* for End of DMA errata need to happen in DMA Mode.
*/
- dprintk(NDEBUG_INTR, "scsi%d: interrupt in DMA mode\n", intance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
int transferred;
@@ -1023,8 +1022,7 @@ static irqreturn_t NCR5380_intr(int irq,
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: interrupt with SEL and IO\n",
- instance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
if (!hostdata->connected) {
NCR5380_reselect(instance);
@@ -1036,7 +1034,7 @@ static irqreturn_t NCR5380_intr(int irq,
/* Probably Bus Reset */
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt\n", instance->host_no);
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
}
handled = 1;
} else {
@@ -1091,7 +1089,8 @@ static struct scsi_cmnd *NCR5380_select(
int err;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
/*
* Arbitration and selection phases are slow and involve dropping the
@@ -1143,7 +1142,7 @@ static struct scsi_cmnd *NCR5380_select(
/* Check for lost arbitration */
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
goto out;
}
@@ -1177,7 +1176,7 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
/*
* Now that we have won arbitration, start Selection process, asserting
@@ -1231,7 +1230,7 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d : selecting target %d\n", instance->host_no, scmd_id(cmd));
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
/*
* The SCSI specification calls for a 250 ms timeout for the actual
@@ -1305,7 +1304,8 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
len = 1;
@@ -1315,7 +1315,7 @@ static struct scsi_cmnd *NCR5380_select(
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
hostdata->connected = cmd;
@@ -1362,11 +1362,6 @@ static int NCR5380_transfer_pio(struct S
int c = *count;
unsigned char *d = *data;
- if (!(p & SR_IO))
- dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c);
- else
- dprintk(NDEBUG_PIO, "scsi%d : pio read %d bytes\n", instance->host_no, c);
-
/*
* The NCR5380 chip will only drive the SCSI bus when the
* phase specified in the appropriate bits of the TARGET COMMAND
@@ -1384,12 +1379,12 @@ static int NCR5380_transfer_pio(struct S
if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no);
- NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance);
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
+ NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
/* Do actual transfer from SCSI bus to / from memory */
@@ -1426,7 +1421,7 @@ static int NCR5380_transfer_pio(struct S
STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
* We have several special cases to consider during REQ/ACK handshaking :
@@ -1447,7 +1442,7 @@ static int NCR5380_transfer_pio(struct S
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d : residual %d\n", instance->host_no, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
@@ -1597,8 +1592,10 @@ static int NCR5380_transfer_dma(struct S
if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
c -= 2;
}
- dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d);
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
+
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
#endif
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
@@ -1700,7 +1697,8 @@ static int NCR5380_transfer_dma(struct S
}
}
- dprintk(NDEBUG_DMA, "scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n", instance->host_no, tmp, NCR5380_read(STATUS_REG));
+ dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n",
+ tmp, NCR5380_read(STATUS_REG));
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1870,7 +1868,9 @@ static void NCR5380_information_transfer
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- dprintk(NDEBUG_INFORMATION, "scsi%d : %d bytes and %d buffers left\n", instance->host_no, cmd->SCp.this_residual, cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
/*
* The preferred transfer method is going to be
@@ -2025,14 +2025,15 @@ static void NCR5380_information_transfer
spin_unlock_irq(&hostdata->lock);
- dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no);
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
-
- dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
if (!len && extended_msg[1] > 0 &&
extended_msg[1] <= sizeof(extended_msg) - 2) {
@@ -2043,7 +2044,8 @@ static void NCR5380_information_transfer
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d : message received, residual %d\n", instance->host_no, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2160,7 +2162,8 @@ static void NCR5380_reselect(struct Scsi
NCR5380_write(MODE_REG, MR_BASE);
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_RESELECTION, "scsi%d : reselect\n", instance->host_no);
+
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2249,8 +2252,8 @@ static void NCR5380_reselect(struct Scsi
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n",
- instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
/*
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (63 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 64/78] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 66/78] ncr5380: Fix soft lockups Finn Thain
` (13 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_scsi-sun3_scsi-remove-global-instances --]
[-- Type: text/plain, Size: 9143 bytes --]
This refactoring removes two global Scsi_Host pointers. This
improves consistency with other ncr5380 drivers. Adopting the same
conventions as the other drivers makes them easier to read.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/atari_NCR5380.c | 5 +-
drivers/scsi/atari_scsi.c | 29 ++++++++---------
drivers/scsi/sun3_scsi.c | 72 ++++++++++---------------------------------
3 files changed, 36 insertions(+), 70 deletions(-)
Index: linux/drivers/scsi/atari_scsi.c
===================================================================
--- linux.orig/drivers/scsi/atari_scsi.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/atari_scsi.c 2016-01-03 16:04:36.000000000 +1100
@@ -159,14 +159,10 @@ static inline unsigned long SCSI_DMA_GET
return adr;
}
-#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
- (atari_scsi_host->hostdata))->dma_len)
-
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
-static struct Scsi_Host *atari_scsi_host;
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
@@ -262,15 +258,17 @@ static void scsi_dma_buserr(int irq, voi
#endif
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
dma_stat = tt_scsi_dma.dma_ctrl;
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
- atari_scsi_host->host_no, dma_stat & 0xff);
+ dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+ dma_stat & 0xff);
/* Look if it was the DMA that has interrupted: First possibility
* is that a bus error occurred...
@@ -293,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq,
* data reg!
*/
if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
- atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+ atari_dma_residual = hostdata->dma_len -
+ (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
@@ -345,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq,
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
return IRQ_HANDLED;
}
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
/* Turn off DMA and select sector counter register before
@@ -388,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int
printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
"ST-DMA fifo\n", transferred & 15);
- atari_dma_residual = HOSTDATA_DMALEN - transferred;
+ atari_dma_residual = hostdata->dma_len - transferred;
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
} else
@@ -400,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int
* data to the original destination address.
*/
memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
- HOSTDATA_DMALEN - atari_dma_residual);
+ hostdata->dma_len - atari_dma_residual);
atari_dma_orig_addr = NULL;
}
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
+
return IRQ_HANDLED;
}
@@ -873,7 +875,6 @@ static int __init atari_scsi_probe(struc
error = -ENOMEM;
goto fail_alloc;
}
- atari_scsi_host = instance;
instance->irq = irq->start;
Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
--- linux.orig/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/sun3_scsi.c 2016-01-03 16:04:36.000000000 +1100
@@ -56,9 +56,9 @@
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
- sun3scsi_dma_setup(data, count, 0)
+ sun3scsi_dma_setup(instance, data, count, 0)
#define NCR5380_dma_write_setup(instance, data, count) \
- sun3scsi_dma_setup(data, count, 1)
+ sun3scsi_dma_setup(instance, data, count, 1)
#define NCR5380_dma_residual(instance) \
sun3scsi_dma_residual(instance)
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
@@ -99,7 +99,6 @@ static unsigned char *sun3_dma_orig_addr
static unsigned long sun3_dma_orig_count;
static int sun3_dma_active;
static unsigned long last_residual;
-static struct Scsi_Host *default_instance;
/*
* NCR 5380 register access functions
@@ -142,8 +141,9 @@ static inline void sun3_udc_write(unsign
// safe bits for the CSR
#define CSR_GOOD 0x060f
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
+static irqreturn_t scsi_sun3_intr(int irq, void *dev)
{
+ struct Scsi_Host *instance = dev;
unsigned short csr = dregs->csr;
int handled = 0;
@@ -152,46 +152,24 @@ static irqreturn_t scsi_sun3_intr(int ir
#endif
if(csr & ~CSR_GOOD) {
- if(csr & CSR_DMA_BUSERR) {
- printk("scsi%d: bus error in dma\n", default_instance->host_no);
- }
-
- if(csr & CSR_DMA_CONFLICT) {
- printk("scsi%d: dma conflict\n", default_instance->host_no);
- }
+ if (csr & CSR_DMA_BUSERR)
+ shost_printk(KERN_ERR, instance, "bus error in DMA\n");
+ if (csr & CSR_DMA_CONFLICT)
+ shost_printk(KERN_ERR, instance, "DMA conflict\n");
handled = 1;
}
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
handled = 1;
}
return IRQ_RETVAL(handled);
}
-/*
- * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
- * reentering NCR5380_print_status seems to have ugly side effects
- */
-
-/* this doesn't seem to get used at all -- sam */
-#if 0
-void sun3_sun3_debug (void)
-{
- unsigned long flags;
-
- if (default_instance) {
- local_irq_save(flags);
- NCR5380_print_status(default_instance);
- local_irq_restore(flags);
- }
-}
-#endif
-
-
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
-static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
+static unsigned long sun3scsi_dma_setup(struct Scsi_Host *instance,
+ void *data, unsigned long count, int write_flag)
{
void *addr;
@@ -243,10 +221,9 @@ static unsigned long sun3scsi_dma_setup(
dregs->csr |= CSR_FIFO;
if(dregs->fifo_count != count) {
- printk("scsi%d: fifo_mismatch %04x not %04x\n",
- default_instance->host_no, dregs->fifo_count,
- (unsigned int) count);
- NCR5380_dprint(NDEBUG_DMA, default_instance);
+ shost_printk(KERN_ERR, instance, "FIFO mismatch %04x not %04x\n",
+ dregs->fifo_count, (unsigned int) count);
+ NCR5380_dprint(NDEBUG_DMA, instance);
}
/* setup udc */
@@ -281,21 +258,6 @@ static unsigned long sun3scsi_dma_setup(
}
-#ifndef SUN3_SCSI_VME
-static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
-{
- unsigned short resid;
-
- dregs->udc_addr = 0x32;
- udelay(SUN3_DMA_DELAY);
- resid = dregs->udc_data;
- udelay(SUN3_DMA_DELAY);
- resid *= 2;
-
- return (unsigned long) resid;
-}
-#endif
-
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
{
return last_residual;
@@ -393,7 +355,10 @@ static int sun3scsi_dma_finish(int write
}
}
- count = sun3scsi_dma_count(default_instance);
+ dregs->udc_addr = 0x32;
+ udelay(SUN3_DMA_DELAY);
+ count = 2 * dregs->udc_data;
+ udelay(SUN3_DMA_DELAY);
fifo = dregs->fifo_count;
last_residual = fifo;
@@ -547,7 +512,6 @@ static int __init sun3_scsi_probe(struct
error = -ENOMEM;
goto fail_alloc;
}
- default_instance = instance;
instance->io_port = (unsigned long)ioaddr;
instance->irq = irq->start;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:34.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:36.000000000 +1100
@@ -1920,7 +1920,7 @@ static void NCR5380_information_transfer
/* this command setup for dma yet? */
if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
if (cmd->request->cmd_type == REQ_TYPE_FS) {
- sun3scsi_dma_setup(d, count,
+ sun3scsi_dma_setup(instance, d, count,
rq_data_dir(cmd->request));
sun3_dma_setup_done = cmd;
}
@@ -2458,7 +2458,8 @@ static void NCR5380_reselect(struct Scsi
}
/* setup this command for dma if not already */
if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
- sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+ sun3scsi_dma_setup(instance, d, count,
+ rq_data_dir(tmp->request));
sun3_dma_setup_done = tmp;
}
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 66/78] ncr5380: Fix soft lockups
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (64 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 65/78] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 67/78] ncr5380: Cleanup comments Finn Thain
` (12 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel, Russell King,
linux-arm-kernel
[-- Attachment #1: ncr5380-max_sectors --]
[-- Type: text/plain, Size: 7103 bytes --]
Because of the rudimentary design of the chip, it is necessary to poll the
SCSI bus signals during PIO and this tends to hog the CPU. The driver will
accept new commands while others execute, and this causes a soft lockup
because the workqueue item will not terminate until the issue queue is
emptied.
When exercising dmx3191d using sequential IO from dd, the driver is sent
512 KiB WRITE commands and 128 KiB READs. For a PIO transfer, the rate is
is only about 300 KiB/s, so these are long-running commands. And although
PDMA may run at several MiB/s, interrupts are disabled for the duration
of the transfer.
Fix the unresponsiveness and soft lockup issues by calling cond_resched()
after each command is completed and by limiting max_sectors for drivers
that don't implement real DMA.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changed since v2:
- Moved max_sectors initialization to wrapper drivers. It isn't really
relevant to the core driver and compile-time configuration using macros
like REAL_DMA should be avoided.
---
drivers/scsi/NCR5380.c | 6 ++++--
drivers/scsi/arm/cumana_1.c | 1 +
drivers/scsi/arm/oak.c | 1 +
drivers/scsi/atari_NCR5380.c | 6 ++++--
drivers/scsi/dmx3191d.c | 1 +
drivers/scsi/dtc.c | 1 +
drivers/scsi/g_NCR5380.c | 1 +
drivers/scsi/mac_scsi.c | 1 +
drivers/scsi/pas16.c | 1 +
drivers/scsi/t128.c | 1 +
10 files changed, 16 insertions(+), 4 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:34.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:38.000000000 +1100
@@ -890,10 +890,10 @@ static void NCR5380_main(struct work_str
struct scsi_cmnd *cmd;
int done;
- spin_lock_irq(&hostdata->lock);
do {
done = 1;
+ spin_lock_irq(&hostdata->lock);
while (!hostdata->connected &&
(cmd = dequeue_next_cmd(instance))) {
@@ -930,8 +930,10 @@ static void NCR5380_main(struct work_str
NCR5380_information_transfer(instance);
done = 0;
}
+ spin_unlock_irq(&hostdata->lock);
+ if (!done)
+ cond_resched();
} while (!done);
- spin_unlock_irq(&hostdata->lock);
}
#ifndef DONT_USE_INTR
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:36.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:38.000000000 +1100
@@ -976,10 +976,10 @@ static void NCR5380_main(struct work_str
* alter queues and touch the Falcon lock.
*/
- spin_lock_irq(&hostdata->lock);
do {
done = 1;
+ spin_lock_irq(&hostdata->lock);
while (!hostdata->connected &&
(cmd = dequeue_next_cmd(instance))) {
@@ -1026,8 +1026,10 @@ static void NCR5380_main(struct work_str
NCR5380_information_transfer(instance);
done = 0;
}
+ spin_unlock_irq(&hostdata->lock);
+ if (!done)
+ cond_resched();
} while (!done);
- spin_unlock_irq(&hostdata->lock);
}
Index: linux/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux.orig/drivers/scsi/arm/cumana_1.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/arm/cumana_1.c 2016-01-03 16:04:38.000000000 +1100
@@ -209,6 +209,7 @@ static struct scsi_host_template cumanas
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "CumanaSCSI-1",
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int cumanascsi1_probe(struct expansion_card *ec,
Index: linux/drivers/scsi/arm/oak.c
===================================================================
--- linux.orig/drivers/scsi/arm/oak.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/arm/oak.c 2016-01-03 16:04:38.000000000 +1100
@@ -115,6 +115,7 @@ static struct scsi_host_template oakscsi
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
Index: linux/drivers/scsi/dmx3191d.c
===================================================================
--- linux.orig/drivers/scsi/dmx3191d.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/dmx3191d.c 2016-01-03 16:04:38.000000000 +1100
@@ -62,6 +62,7 @@ static struct scsi_host_template dmx3191
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int dmx3191d_probe_one(struct pci_dev *pdev,
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2016-01-03 16:04:38.000000000 +1100
@@ -453,5 +453,6 @@ static struct scsi_host_template driver_
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:38.000000000 +1100
@@ -729,6 +729,7 @@ static struct scsi_host_template driver_
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/mac_scsi.c
===================================================================
--- linux.orig/drivers/scsi/mac_scsi.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/mac_scsi.c 2016-01-03 16:04:38.000000000 +1100
@@ -324,6 +324,7 @@ static struct scsi_host_template mac_scs
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int __init mac_scsi_probe(struct platform_device *pdev)
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2016-01-03 16:04:38.000000000 +1100
@@ -563,6 +563,7 @@ static struct scsi_host_template driver_
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2016-01-03 16:04:20.000000000 +1100
+++ linux/drivers/scsi/t128.c 2016-01-03 16:04:38.000000000 +1100
@@ -407,5 +407,6 @@ static struct scsi_host_template driver_
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 67/78] ncr5380: Cleanup comments
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (65 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 66/78] ncr5380: Fix soft lockups Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp Finn Thain
` (11 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-cleanup-comments --]
[-- Type: text/plain, Size: 20939 bytes --]
The CVS revision log is not nearly as useful as the history/history.git
repo, so remove it. Roman's commentary at the top of his driver repeats
the same information elsewhere in the file so remove it. Also remove
some other redundant or obsolete comments.
Both the driver and the datasheets confusingly refer to a DMA access
for a SCSI WRITE command as a "DMA write". Similarly a SCSI READ command
is called a "DMA read". This is the opposite of the usual convention.
Thankfully, the chip documentation and driver code also use "DMA send" and
"DMA receive", so adopt this terminology.
This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changes since v3:
- Removed another pointless comment. Duplicating the text of the SCSI
standard isn't useful.
---
drivers/scsi/NCR5380.c | 170 ++++++++++---------------------------------
drivers/scsi/atari_NCR5380.c | 107 +++------------------------
2 files changed, 53 insertions(+), 224 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:38.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:40.000000000 +1100
@@ -25,45 +25,8 @@
*/
/*
- * Revision 1.10 1998/9/2 Alan Cox
- * (alan@lxorguk.ukuu.org.uk)
- * Fixed up the timer lockups reported so far. Things still suck. Looking
- * forward to 2.3 and per device request queues. Then it'll be possible to
- * SMP thread this beast and improve life no end.
-
- * Revision 1.9 1997/7/27 Ronald van Cuijlenborg
- * (ronald.van.cuijlenborg@tip.nl or nutty@dds.nl)
- * (hopefully) fixed and enhanced USLEEP
- * added support for DTC3181E card (for Mustek scanner)
- *
-
- * Revision 1.8 Ingmar Baumgart
- * (ingmar@gonzo.schwaben.de)
- * added support for NCR53C400a card
- *
-
- * Revision 1.7 1996/3/2 Ray Van Tassle (rayvt@comm.mot.com)
- * added proc_info
- * added support needed for DTC 3180/3280
- * fixed a couple of bugs
- *
-
- * Revision 1.5 1994/01/19 09:14:57 drew
- * Fixed udelay() hack that was being used on DATAOUT phases
- * instead of a proper wait for the final handshake.
- *
- * Revision 1.4 1994/01/19 06:44:25 drew
- * *** empty log message ***
- *
- * Revision 1.3 1994/01/19 05:24:40 drew
- * Added support for TCR LAST_BYTE_SENT bit.
- *
- * Revision 1.2 1994/01/15 06:14:11 drew
- * REAL DMA support, bug fixes.
- *
- * Revision 1.1 1994/01/15 06:00:54 drew
- * Initial revision
- *
+ * With contributions from Ray Van Tassle, Ingmar Baumgart,
+ * Ronald van Cuijlenborg, Alan Cox and others.
*/
/*
@@ -98,12 +61,6 @@
* transfer - some PC's will use the I/O bus, 68K's must use
* memory mapped) and drops this file in their 'C' wrapper.
*
- * (Note from hch: unfortunately it was not enough for the different
- * m68k folks and instead of improving this driver they copied it
- * and hacked it up for their needs. As a consequence they lost
- * most updates to this driver. Maybe someone will fix all these
- * drivers to use a common core one day..)
- *
* As far as command queueing, two queues are maintained for
* each 5380 in the system - commands that haven't been issued yet,
* and commands that are currently executing. This means that an
@@ -180,9 +137,6 @@
* rely on phase mismatch and EOP interrupts to determine end
* of phase.
*
- * Defaults for these will be provided although the user may want to adjust
- * these to allocate CPU resources to the SCSI driver or "real" code.
- *
* These macros MUST be defined :
*
* NCR5380_read(register) - read from the specified register
@@ -219,7 +173,7 @@
static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
-/*
+/**
* initialize_SCp - init the scsi pointer field
* @cmd: command block to set up
*
@@ -368,8 +322,6 @@ mrs[] = {
* @instance: adapter state to dump
*
* Print the SCSI bus signals for debugging purposes
- *
- * Locks: caller holds hostdata lock (not essential)
*/
static void NCR5380_print(struct Scsi_Host *instance)
@@ -402,13 +354,11 @@ static void NCR5380_print(struct Scsi_Ho
}
-/*
+/**
* NCR5380_print_phase - show SCSI phase
* @instance: adapter to dump
*
* Print the current SCSI phase for debugging purposes
- *
- * Locks: none
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -452,8 +402,6 @@ static irqreturn_t __init probe_intr(int
*
* Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
* and then looking to see what interrupt actually turned up.
- *
- * Locks: none, irqs must be enabled on entry
*/
static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
@@ -503,8 +451,6 @@ static int __init __maybe_unused NCR5380
* @instance: relevant scsi host instance
*
* For use as the host template info() handler.
- *
- * Locks: none
*/
static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -554,20 +500,6 @@ static void prepare_info(struct Scsi_Hos
}
#ifdef PSEUDO_DMA
-/******************************************/
-/*
- * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED]
- *
- * *buffer: I/O buffer
- * **start: if inout == FALSE pointer into buffer where user read should start
- * offset: current offset
- * length: length of buffer
- * hostno: Scsi_Host host_no
- * inout: TRUE - user is writing; FALSE - user is reading
- *
- * Return the number of bytes read from or written
- */
-
static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
char *buffer, int length)
{
@@ -601,8 +533,6 @@ static int __maybe_unused NCR5380_show_i
* set correctly. I don't care about the irq and other fields.
*
* Returns 0 for success
- *
- * Locks: interrupts must be enabled when we are called
*/
static int NCR5380_init(struct Scsi_Host *instance, int flags)
@@ -877,9 +807,6 @@ static void requeue_cmd(struct Scsi_Host
* be done on the NCR5380 host adapters in a system. Both
* NCR5380_queue_command() and NCR5380_intr() will try to start it
* in case it is not running.
- *
- * Locks: called as its own thread with no locks held. Takes the
- * host lock and called routines may take the isa dma lock.
*/
static void NCR5380_main(struct work_struct *work)
@@ -1077,8 +1004,6 @@ static irqreturn_t NCR5380_intr(int irq,
*
* If failed (no target) : cmd->scsi_done() will be called, and the
* cmd->result host byte set to DID_BAD_TARGET.
- *
- * Locks: caller holds hostdata lock in IRQ mode
*/
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
@@ -1567,8 +1492,6 @@ timeout:
* is in same phase.
*
* Also, *phase, *count, *data are modified in place.
- *
- * Locks: io_request lock held by caller
*/
@@ -1645,39 +1568,38 @@ static int NCR5380_transfer_dma(struct S
} while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER)));
/*
- At this point, either we've completed DMA, or we have a phase mismatch,
- or we've unexpectedly lost BUSY (which is a real error).
-
- For write DMAs, we want to wait until the last byte has been
- transferred out over the bus before we turn off DMA mode. Alas, there
- seems to be no terribly good way of doing this on a 5380 under all
- conditions. For non-scatter-gather operations, we can wait until REQ
- and ACK both go false, or until a phase mismatch occurs. Gather-writes
- are nastier, since the device will be expecting more data than we
- are prepared to send it, and REQ will remain asserted. On a 53C8[01] we
- could test LAST BIT SENT to assure transfer (I imagine this is precisely
- why this signal was added to the newer chips) but on the older 538[01]
- this signal does not exist. The workaround for this lack is a watchdog;
- we bail out of the wait-loop after a modest amount of wait-time if
- the usual exit conditions are not met. Not a terribly clean or
- correct solution :-%
-
- Reads are equally tricky due to a nasty characteristic of the NCR5380.
- If the chip is in DMA mode for an READ, it will respond to a target's
- REQ by latching the SCSI data into the INPUT DATA register and asserting
- ACK, even if it has _already_ been notified by the DMA controller that
- the current DMA transfer has completed! If the NCR5380 is then taken
- out of DMA mode, this already-acknowledged byte is lost.
-
- This is not a problem for "one DMA transfer per command" reads, because
- the situation will never arise... either all of the data is DMA'ed
- properly, or the target switches to MESSAGE IN phase to signal a
- disconnection (either operation bringing the DMA to a clean halt).
- However, in order to handle scatter-reads, we must work around the
- problem. The chosen fix is to DMA N-2 bytes, then check for the
- condition before taking the NCR5380 out of DMA mode. One or two extra
- bytes are transferred via PIO as necessary to fill out the original
- request.
+ * At this point, either we've completed DMA, or we have a phase mismatch,
+ * or we've unexpectedly lost BUSY (which is a real error).
+ *
+ * For DMA sends, we want to wait until the last byte has been
+ * transferred out over the bus before we turn off DMA mode. Alas, there
+ * seems to be no terribly good way of doing this on a 5380 under all
+ * conditions. For non-scatter-gather operations, we can wait until REQ
+ * and ACK both go false, or until a phase mismatch occurs. Gather-sends
+ * are nastier, since the device will be expecting more data than we
+ * are prepared to send it, and REQ will remain asserted. On a 53C8[01] we
+ * could test Last Byte Sent to assure transfer (I imagine this is precisely
+ * why this signal was added to the newer chips) but on the older 538[01]
+ * this signal does not exist. The workaround for this lack is a watchdog;
+ * we bail out of the wait-loop after a modest amount of wait-time if
+ * the usual exit conditions are not met. Not a terribly clean or
+ * correct solution :-%
+ *
+ * DMA receive is equally tricky due to a nasty characteristic of the NCR5380.
+ * If the chip is in DMA receive mode, it will respond to a target's
+ * REQ by latching the SCSI data into the INPUT DATA register and asserting
+ * ACK, even if it has _already_ been notified by the DMA controller that
+ * the current DMA transfer has completed! If the NCR5380 is then taken
+ * out of DMA mode, this already-acknowledged byte is lost. This is
+ * not a problem for "one DMA transfer per READ command", because
+ * the situation will never arise... either all of the data is DMA'ed
+ * properly, or the target switches to MESSAGE IN phase to signal a
+ * disconnection (either operation bringing the DMA to a clean halt).
+ * However, in order to handle scatter-receive, we must work around the
+ * problem. The chosen fix is to DMA N-2 bytes, then check for the
+ * condition before taking the NCR5380 out of DMA mode. One or two extra
+ * bytes are transferred via PIO as necessary to fill out the original
+ * request.
*/
if (p & SR_IO) {
@@ -1813,8 +1735,6 @@ static int NCR5380_transfer_dma(struct S
*
* XXX Note : we need to watch for bus free or a reset condition here
* to recover from an unexpected bus free condition.
- *
- * Locks: io_request_lock held by caller in IRQ mode
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance) {
@@ -2009,18 +1929,10 @@ static void NCR5380_information_transfer
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
break;
case EXTENDED_MESSAGE:
-/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since spi_print_msg() wants the whole thing.
- */
+ /*
+ * Start the message buffer with the EXTENDED_MESSAGE
+ * byte, since spi_print_msg() wants the whole thing.
+ */
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -2142,8 +2054,6 @@ static void NCR5380_information_transfer
* nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
- *
- * Locks: io_request_lock held by caller if IRQ driven
*/
static void NCR5380_reselect(struct Scsi_Host *instance) {
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:38.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:40.000000000 +1100
@@ -24,47 +24,7 @@
* 1+ (800) 334-5454
*/
-/*
- * ++roman: To port the 5380 driver to the Atari, I had to do some changes in
- * this file, too:
- *
- * - Some of the debug statements were incorrect (undefined variables and the
- * like). I fixed that.
- *
- * - In information_transfer(), I think a #ifdef was wrong. Looking at the
- * possible DMA transfer size should also happen for REAL_DMA. I added this
- * in the #if statement.
- *
- * - When using real DMA, information_transfer() should return in a DATAOUT
- * phase after starting the DMA. It has nothing more to do.
- *
- * - The interrupt service routine should run main after end of DMA, too (not
- * only after RESELECTION interrupts). Additionally, it should _not_ test
- * for more interrupts after running main, since a DMA process may have
- * been started and interrupts are turned on now. The new int could happen
- * inside the execution of NCR5380_intr(), leading to recursive
- * calls.
- *
- * - I've added a function merge_contiguous_buffers() that tries to
- * merge scatter-gather buffers that are located at contiguous
- * physical addresses and can be processed with the same DMA setup.
- * Since most scatter-gather operations work on a page (4K) of
- * 4 buffers (1K), in more than 90% of all cases three interrupts and
- * DMA setup actions are saved.
- *
- * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA
- * and USLEEP, because these were messing up readability and will never be
- * needed for Atari SCSI.
- *
- * - I've revised the NCR5380_main() calling scheme (relax the 'main_running'
- * stuff), and 'main' is executed in a bottom half if awoken by an
- * interrupt.
- *
- * - The code was quite cluttered up by "#if (NDEBUG & NDEBUG_*) printk..."
- * constructs. In my eyes, this made the source rather unreadable, so I
- * finally replaced that by the *_PRINTK() macros.
- *
- */
+/* Ported to Atari by Roman Hodek and others. */
/* Adapted for the sun3 by Sam Creasey. */
@@ -344,17 +304,15 @@ static void free_all_tags(struct NCR5380
#endif /* SUPPORT_TAGS */
-
-/*
- * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd )
+/**
+ * merge_contiguous_buffers - coalesce scatter-gather list entries
+ * @cmd: command requesting IO
*
- * Purpose: Try to merge several scatter-gather requests into one DMA
- * transfer. This is possible if the scatter buffers lie on
- * physical contiguous addresses.
- *
- * Parameters: struct scsi_cmnd *cmd
- * The command to work on. The first scatter buffer's data are
- * assumed to be already transferred into ptr/this_residual.
+ * Try to merge several scatter-gather buffers into one DMA transfer.
+ * This is possible if the scatter buffers lie on physically
+ * contiguous addresses. The first scatter-gather buffer's data are
+ * assumed to be already transferred into cmd->SCp.this_residual.
+ * Every buffer merged avoids an interrupt and a DMA setup operation.
*/
static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -406,9 +364,7 @@ static inline void initialize_SCp(struct
cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
cmd->SCp.this_residual = cmd->SCp.buffer->length;
- /* ++roman: Try to merge some scatter-buffers if they are at
- * contiguous physical addresses.
- */
+
merge_contiguous_buffers(cmd);
} else {
cmd->SCp.buffer = NULL;
@@ -556,8 +512,6 @@ static struct {
* @instance: adapter to dump
*
* Print the current SCSI phase for debugging purposes
- *
- * Locks: none
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -583,8 +537,6 @@ static void NCR5380_print_phase(struct S
* @instance: relevant scsi host instance
*
* For use as the host template info() handler.
- *
- * Locks: none
*/
static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -829,20 +781,6 @@ static int NCR5380_queue_command(struct
cmd->result = 0;
/*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
- * commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
- * sense data is only guaranteed to be valid while the condition exists.
- */
-
- /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
- * Otherwise a running NCR5380_main may steal the lock.
- * Lock before actually inserting due to fairness reasons explained in
- * atari_scsi.c. If we insert first, then it's impossible for this driver
- * to release the lock.
- * Stop timer for this command while waiting for the lock, or timeouts
- * may happen (and they really do), and it's no good if the command doesn't
- * appear in any of the queues.
* ++roman: Just disabling the NCR interrupt isn't sufficient here,
* because also a timer int can trigger an abort or reset, which would
* alter queues and touch the lock.
@@ -958,8 +896,6 @@ static void requeue_cmd(struct Scsi_Host
* be done on the NCR5380 host adapters in a system. Both
* NCR5380_queue_command() and NCR5380_intr() will try to start it
* in case it is not running.
- *
- * Locks: called as its own thread with no locks held.
*/
static void NCR5380_main(struct work_struct *work)
@@ -1041,7 +977,6 @@ static void NCR5380_main(struct work_str
* mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
- *
*/
static void NCR5380_dma_complete(struct Scsi_Host *instance)
@@ -1766,7 +1701,6 @@ timeout:
* is in same phase.
*
* Also, *phase, *count, *data are modified in place.
- *
*/
@@ -1968,9 +1902,6 @@ static void NCR5380_information_transfer
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- /* ++roman: Try to merge some scatter-buffers if
- * they are at contiguous physical addresses.
- */
merge_contiguous_buffers(cmd);
dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
cmd->SCp.this_residual,
@@ -2007,7 +1938,8 @@ static void NCR5380_information_transfer
/*
* If the watchdog timer fires, all future
* accesses to this device will use the
- * polled-IO. */
+ * polled-IO.
+ */
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
@@ -2099,10 +2031,6 @@ static void NCR5380_information_transfer
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* ++roman: For Falcon SCSI, release the lock on the
- * ST-DMA here if no other commands are waiting on the
- * disconnected queue.
- */
maybe_release_dma_irq(instance);
return;
case MESSAGE_REJECT:
@@ -2164,15 +2092,7 @@ static void NCR5380_information_transfer
break;
case EXTENDED_MESSAGE:
/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
+ * Start the message buffer with the EXTENDED_MESSAGE
* byte, since spi_print_msg() wants the whole thing.
*/
extended_msg[0] = EXTENDED_MESSAGE;
@@ -2299,7 +2219,6 @@ static void NCR5380_information_transfer
* nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
- *
*/
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (66 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 67/78] ncr5380: Cleanup comments Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
` (10 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-regexp-trailing-whitespace --]
[-- Type: text/plain, Size: 34355 bytes --]
This patch is the result of the following substitution. It removes any
tabs and spaces at the end of a line.
perl -i -pe 's,[\t ]+$,,' drivers/scsi/{atari_,}NCR5380.c
This removes some unimportant discrepancies between the two core driver
forks so that the important ones become obvious, to facilitate
reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
Changes since v3:
- Now split into two patches (one for each regexp). This may make review
easier though it means many lines are now changed twice.
---
drivers/scsi/NCR5380.c | 372 ++++++++++++++++++++++++-------------------------
1 file changed, 186 insertions(+), 186 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:40.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:42.000000000 +1100
@@ -1,4 +1,4 @@
-/*
+/*
* NCR 5380 generic driver routines. These should make it *trivial*
* to implement 5380 SCSI drivers under Linux with a non-trantor
* architecture.
@@ -6,12 +6,12 @@
* Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
+ * Visionary Computing
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 666-5836
*
- * For more information, please consult
+ * For more information, please consult
*
* NCR 5380 Family
* SCSI Protocol Controller
@@ -30,16 +30,16 @@
*/
/*
- * Further development / testing that should be done :
+ * Further development / testing that should be done :
* 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
+ * code so that everything does the same thing that's done at the
* end of a pseudo-DMA read operation.
*
* 2. Fix REAL_DMA (interrupt driven, polled works fine) -
- * basically, transfer size needs to be reduced by one
+ * basically, transfer size needs to be reduced by one
* and the last byte read as is done with PSEUDO_DMA.
- *
- * 4. Test SCSI-II tagged queueing (I have no devices which support
+ *
+ * 4. Test SCSI-II tagged queueing (I have no devices which support
* tagged queueing)
*/
@@ -56,27 +56,27 @@
/*
* Design
*
- * This is a generic 5380 driver. To use it on a different platform,
+ * This is a generic 5380 driver. To use it on a different platform,
* one simply writes appropriate system specific macros (ie, data
- * transfer - some PC's will use the I/O bus, 68K's must use
+ * transfer - some PC's will use the I/O bus, 68K's must use
* memory mapped) and drops this file in their 'C' wrapper.
*
- * As far as command queueing, two queues are maintained for
+ * As far as command queueing, two queues are maintained for
* each 5380 in the system - commands that haven't been issued yet,
- * and commands that are currently executing. This means that an
- * unlimited number of commands may be queued, letting
- * more commands propagate from the higher driver levels giving higher
- * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
- * allowing multiple commands to propagate all the way to a SCSI-II device
+ * and commands that are currently executing. This means that an
+ * unlimited number of commands may be queued, letting
+ * more commands propagate from the higher driver levels giving higher
+ * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
+ * allowing multiple commands to propagate all the way to a SCSI-II device
* while a command is already executing.
*
*
- * Issues specific to the NCR5380 :
+ * Issues specific to the NCR5380 :
*
- * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
- * piece of hardware that requires you to sit in a loop polling for
- * the REQ signal as long as you are connected. Some devices are
- * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
+ * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
+ * piece of hardware that requires you to sit in a loop polling for
+ * the REQ signal as long as you are connected. Some devices are
+ * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
* while doing long seek operations. [...] These
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
@@ -87,23 +87,23 @@
* which is started from a workqueue for each NCR5380 host in the
* system. It attempts to establish I_T_L or I_T_L_Q nexuses by
* removing the commands from the issue queue and calling
- * NCR5380_select() if a nexus is not established.
+ * NCR5380_select() if a nexus is not established.
*
* Once a nexus is established, the NCR5380_information_transfer()
* phase goes through the various phases as instructed by the target.
* if the target goes into MSG IN and sends a DISCONNECT message,
* the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work. If the target is
+ * queue, and NCR5380_main tries to find more work. If the target is
* idle for too long, the system will try to sleep.
*
* If a command has disconnected, eventually an interrupt will trigger,
* calling NCR5380_intr() which will in turn call NCR5380_reselect
* to reestablish a nexus. This will run main if necessary.
*
- * On command termination, the done function will be called as
+ * On command termination, the done function will be called as
* appropriate.
*
- * SCSI pointers are maintained in the SCp field of SCSI command
+ * SCSI pointers are maintained in the SCp field of SCSI command
* structures, being initialized after the command is connected
* in NCR5380_select, and set as appropriate in NCR5380_information_transfer.
* Note that in violation of the standard, an implicit SAVE POINTERS operation
@@ -113,18 +113,18 @@
/*
* Using this file :
* This file a skeleton Linux SCSI driver for the NCR 5380 series
- * of chips. To use it, you write an architecture specific functions
+ * of chips. To use it, you write an architecture specific functions
* and macros and include this file in your driver.
*
- * These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
+ * These macros control options :
+ * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
* defined.
- *
+ *
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
+ * transceivers.
*
* DONT_USE_INTR - if defined, never use interrupts, even if we probe or
* override-configure an IRQ.
@@ -134,25 +134,25 @@
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
- * rely on phase mismatch and EOP interrupts to determine end
+ * rely on phase mismatch and EOP interrupts to determine end
* of phase.
*
* These macros MUST be defined :
- *
+ *
* NCR5380_read(register) - read from the specified register
*
- * NCR5380_write(register, value) - write to the specific register
+ * NCR5380_write(register, value) - write to the specific register
*
- * NCR5380_implementation_fields - additional fields needed for this
+ * NCR5380_implementation_fields - additional fields needed for this
* specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
+ * REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
+ * Note that the DMA setup functions should return the number of bytes
* that they were able to program the controller for.
*
- * Also note that generic i386/PC versions of these macros are
+ * Also note that generic i386/PC versions of these macros are
* available as NCR5380_i386_dma_write_setup,
* NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
@@ -165,7 +165,7 @@
* NCR5380_pread(instance, dst, count);
*
* The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
+ * after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
* possible) function may be used.
*/
@@ -182,8 +182,8 @@ static void do_reset(struct Scsi_Host *)
static inline void initialize_SCp(struct scsi_cmnd *cmd)
{
- /*
- * Initialize the Scsi Pointer field so that all of the commands in the
+ /*
+ * Initialize the Scsi Pointer field so that all of the commands in the
* various queues are valid.
*/
@@ -268,12 +268,12 @@ static struct {
unsigned char value;
const char *name;
} phases[] __maybe_unused = {
- {PHASE_DATAOUT, "DATAOUT"},
- {PHASE_DATAIN, "DATAIN"},
- {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"},
- {PHASE_MSGOUT, "MSGOUT"},
- {PHASE_MSGIN, "MSGIN"},
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
{PHASE_UNKNOWN, "UNKNOWN"}
};
@@ -281,39 +281,39 @@ static struct {
static struct {
unsigned char mask;
const char *name;
-} signals[] = {
- {SR_DBP, "PARITY"},
- {SR_RST, "RST"},
- {SR_BSY, "BSY"},
- {SR_REQ, "REQ"},
- {SR_MSG, "MSG"},
- {SR_CD, "CD"},
- {SR_IO, "IO"},
- {SR_SEL, "SEL"},
+} signals[] = {
+ {SR_DBP, "PARITY"},
+ {SR_RST, "RST"},
+ {SR_BSY, "BSY"},
+ {SR_REQ, "REQ"},
+ {SR_MSG, "MSG"},
+ {SR_CD, "CD"},
+ {SR_IO, "IO"},
+ {SR_SEL, "SEL"},
{0, NULL}
-},
+},
basrs[] = {
- {BASR_ATN, "ATN"},
- {BASR_ACK, "ACK"},
+ {BASR_ATN, "ATN"},
+ {BASR_ACK, "ACK"},
{0, NULL}
-},
-icrs[] = {
- {ICR_ASSERT_RST, "ASSERT RST"},
- {ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"},
- {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"},
- {ICR_ASSERT_DATA, "ASSERT DATA"},
+},
+icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"},
+ {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"},
+ {ICR_ASSERT_DATA, "ASSERT DATA"},
{0, NULL}
-},
-mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
- {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
- {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
- {MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"},
- {MR_ARBITRATE, "MODE ARBITRATION"},
+},
+mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
+ {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_MONITOR_BSY, "MODE MONITOR BSY"},
+ {MR_DMA_MODE, "MODE DMA"},
+ {MR_ARBITRATE, "MODE ARBITRATION"},
{0, NULL}
};
@@ -388,7 +388,7 @@ static int probe_irq __initdata;
* Set a flag to indicate the IRQ in question was received. This is
* used by the IRQ probe code.
*/
-
+
static irqreturn_t __init probe_intr(int irq, void *dev_id)
{
probe_irq = irq;
@@ -420,7 +420,7 @@ static int __init __maybe_unused NCR5380
/*
* A interrupt is triggered whenever BSY = false, SEL = true
- * and a bit set in the SELECT_ENABLE_REG is asserted on the
+ * and a bit set in the SELECT_ENABLE_REG is asserted on the
* SCSI bus.
*
* Note that the bus is only driven when the phase control signals
@@ -435,7 +435,7 @@ static int __init __maybe_unused NCR5380
while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
-
+
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -530,7 +530,7 @@ static int __maybe_unused NCR5380_show_i
* with flags OR'd into the initial flags value.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * set correctly. I don't care about the irq and other fields.
*
* Returns 0 for success
*/
@@ -561,7 +561,7 @@ static int NCR5380_init(struct Scsi_Host
INIT_LIST_HEAD(&hostdata->disconnected);
hostdata->flags = flags;
-
+
INIT_WORK(&hostdata->main_task, NCR5380_main);
hostdata->work_q = alloc_workqueue("ncr5380_%d",
WQ_UNBOUND | WQ_MEM_RECLAIM,
@@ -720,10 +720,10 @@ static int NCR5380_queue_command(struct
spin_lock_irqsave(&hostdata->lock, flags);
- /*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
+ /*
+ * Insert the cmd into the issue queue. Note that REQUEST SENSE
* commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
+ * clear the contingent allegiance condition that exists and the
* sense data is only guaranteed to be valid while the condition exists.
*/
@@ -803,9 +803,9 @@ static void requeue_cmd(struct Scsi_Host
/**
* NCR5380_main - NCR state machines
*
- * NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
* in case it is not running.
*/
@@ -816,7 +816,7 @@ static void NCR5380_main(struct work_str
struct Scsi_Host *instance = hostdata->host;
struct scsi_cmnd *cmd;
int done;
-
+
do {
done = 1;
@@ -975,37 +975,37 @@ static irqreturn_t NCR5380_intr(int irq,
return IRQ_RETVAL(handled);
}
-#endif
+#endif
-/*
+/*
* Function : int NCR5380_select(struct Scsi_Host *instance,
* struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
*
- * Inputs : instance - instantiation of the 5380 driver on which this
+ * Inputs : instance - instantiation of the 5380 driver on which this
* target lives, cmd - SCSI command to execute.
- *
+ *
* Returns cmd if selection failed but should be retried,
* NULL if selection failed and should not be retried, or
* NULL if selection succeeded (hostdata->connected == cmd).
*
- * Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * Side effects :
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
* with registers as they should have been on entry - ie
* SELECT_ENABLE will be set appropriately, the NCR5380
* will cease to drive any SCSI bus signals.
*
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
* SELECT interrupt will be disabled.
*
- * If failed (no target) : cmd->scsi_done() will be called, and the
+ * If failed (no target) : cmd->scsi_done() will be called, and the
* cmd->result host byte set to DID_BAD_TARGET.
*/
-
+
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
{
@@ -1028,14 +1028,14 @@ static struct scsi_cmnd *NCR5380_select(
*/
hostdata->selecting = cmd;
- /*
- * Set the phase bits to 0, otherwise the NCR5380 won't drive the
+ /*
+ * Set the phase bits to 0, otherwise the NCR5380 won't drive the
* data bus during SELECTION.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
- /*
+ /*
* Start arbitration.
*/
@@ -1081,8 +1081,8 @@ static struct scsi_cmnd *NCR5380_select(
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
- /*
- * Again, bus clear + bus settle time is 1.2us, however, this is
+ /*
+ * Again, bus clear + bus settle time is 1.2us, however, this is
* a minimum so we'll udelay ceil(1.2)
*/
@@ -1105,14 +1105,14 @@ static struct scsi_cmnd *NCR5380_select(
dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
- /*
- * Now that we have won arbitration, start Selection process, asserting
+ /*
+ * Now that we have won arbitration, start Selection process, asserting
* the host and target ID's on the SCSI bus.
*/
NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd))));
- /*
+ /*
* Raise ATN while SEL is true before BSY goes false from arbitration,
* since this is the only way to guarantee that we'll get a MESSAGE OUT
* phase immediately after selection.
@@ -1121,7 +1121,7 @@ static struct scsi_cmnd *NCR5380_select(
NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
NCR5380_write(MODE_REG, MR_BASE);
- /*
+ /*
* Reselect interrupts must be turned off prior to the dropping of BSY,
* otherwise we will trigger an interrupt.
*/
@@ -1130,7 +1130,7 @@ static struct scsi_cmnd *NCR5380_select(
spin_unlock_irq(&hostdata->lock);
/*
- * The initiator shall then wait at least two deskew delays and release
+ * The initiator shall then wait at least two deskew delays and release
* the BSY signal.
*/
udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
@@ -1138,17 +1138,17 @@ static struct scsi_cmnd *NCR5380_select(
/* Reset BSY */
NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
- /*
+ /*
* Something weird happens when we cease to drive BSY - looks
- * like the board/chip is letting us do another read before the
+ * like the board/chip is letting us do another read before the
* appropriate propagation delay has expired, and we're confusing
* a BSY signal from ourselves as the target's response to SELECTION.
*
* A small delay (the 'C++' frontend breaks the pipeline with an
* unnecessary jump, making it work on my 386-33/Trantor T128, the
- * tighter 'C' code breaks and requires this) solves the problem -
- * the 1 us delay is arbitrary, and only used because this delay will
- * be the same on other platforms and since it works here, it should
+ * tighter 'C' code breaks and requires this) solves the problem -
+ * the 1 us delay is arbitrary, and only used because this delay will
+ * be the same on other platforms and since it works here, it should
* work there.
*
* wingel suggests that this could be due to failing to wait
@@ -1159,8 +1159,8 @@ static struct scsi_cmnd *NCR5380_select(
dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
- /*
- * The SCSI specification calls for a 250 ms timeout for the actual
+ /*
+ * The SCSI specification calls for a 250 ms timeout for the actual
* selection.
*/
@@ -1191,9 +1191,9 @@ static struct scsi_cmnd *NCR5380_select(
goto out;
}
- /*
- * No less than two deskew delays after the initiator detects the
- * BSY signal is true, it shall release the SEL signal and may
+ /*
+ * No less than two deskew delays after the initiator detects the
+ * BSY signal is true, it shall release the SEL signal and may
* change the DATA BUS. -wingel
*/
@@ -1202,11 +1202,11 @@ static struct scsi_cmnd *NCR5380_select(
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
/*
- * Since we followed the SCSI spec, and raised ATN while SEL
+ * Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
* transfer phase should be a MESSAGE OUT phase so that we can send the
* IDENTIFY message.
- *
+ *
* If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
* message (2 bytes) with a tag ID that we increment with every command
* until it wraps back to 0.
@@ -1259,16 +1259,16 @@ out:
return cmd;
}
-/*
- * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
+/*
+ * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
* bytes to transfer, **data - pointer to data pointer.
- *
+ *
* Returns : -1 when different phase is entered without transferring
* maximum number of bytes, 0 if all bytes or transferred or exit
* is in same phase.
@@ -1279,7 +1279,7 @@ out:
*/
/*
- * Note : this code is not as quick as it could be, however it
+ * Note : this code is not as quick as it could be, however it
* IS 100% reliable, and for the actual data transfer where speed
* counts, we will always do a pseudo DMA or DMA transfer.
*/
@@ -1289,8 +1289,8 @@ static int NCR5380_transfer_pio(struct S
int c = *count;
unsigned char *d = *data;
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
+ /*
+ * The NCR5380 chip will only drive the SCSI bus when the
* phase specified in the appropriate bits of the TARGET COMMAND
* REGISTER match the STATUS REGISTER
*/
@@ -1298,9 +1298,9 @@ static int NCR5380_transfer_pio(struct S
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
do {
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
+ /*
+ * Wait for assertion of REQ, after which the phase bits will be
+ * valid
*/
if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
@@ -1322,7 +1322,7 @@ static int NCR5380_transfer_pio(struct S
++d;
- /*
+ /*
* The SCSI standard suggests that in MSGOUT phase, the initiator
* should drop ATN on the last byte of the message phase
* after REQ has been asserted for the handshake but before
@@ -1351,11 +1351,11 @@ static int NCR5380_transfer_pio(struct S
dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
* message. ATN must be dropped as ACK is dropped.
*
- * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
* message. We must exit with ACK asserted, so that the calling
* code may raise ATN before dropping ACK to reject the message.
*
@@ -1400,7 +1400,7 @@ static int NCR5380_transfer_pio(struct S
* it. When the driver is initialized, the NCR5380_intr() handler has not yet
* been installed. And when in EH we may have released the ST DMA interrupt.
*/
-
+
static void do_reset(struct Scsi_Host *instance)
{
unsigned long flags;
@@ -1432,12 +1432,12 @@ static int do_abort(struct Scsi_Host *in
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- /*
- * Wait for the target to indicate a valid phase by asserting
- * REQ. Once this happens, we'll have either a MSGOUT phase
- * and can immediately send the ABORT message, or we'll have some
+ /*
+ * Wait for the target to indicate a valid phase by asserting
+ * REQ. Once this happens, we'll have either a MSGOUT phase
+ * and can immediately send the ABORT message, or we'll have some
* other phase and will have to source/sink data.
- *
+ *
* We really don't care what value was on the bus or what value
* the target sees, so we just handshake.
*/
@@ -1447,7 +1447,7 @@ static int do_abort(struct Scsi_Host *in
goto timeout;
tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
-
+
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
if (tmp != PHASE_MSGOUT) {
@@ -1476,17 +1476,17 @@ timeout:
}
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
-/*
- * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
+/*
+ * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
* or pseudo DMA.
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
* bytes to transfer, **data - pointer to data pointer.
- *
+ *
* Returns : -1 when different phase is entered without transferring
* maximum number of bytes, 0 if all bytes or transferred or exit
* is in same phase.
@@ -1533,7 +1533,7 @@ static int NCR5380_transfer_dma(struct S
#else
/*
* Note : on my sample board, watch-dog timeouts occurred when interrupts
- * were not disabled for the duration of a single DMA transfer, from
+ * were not disabled for the duration of a single DMA transfer, from
* before the setting of DMA mode to after transfer of the last byte.
*/
@@ -1546,7 +1546,7 @@ static int NCR5380_transfer_dma(struct S
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
- /*
+ /*
* On the PAS16 at least I/O recovery delays are not needed here.
* Everyone else seems to want them.
*/
@@ -1661,24 +1661,24 @@ static int NCR5380_transfer_dma(struct S
hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
- * We can't disable DMA mode after successfully transferring
+ * We can't disable DMA mode after successfully transferring
* what we plan to be the last byte, since that would open up
- * a race condition where if the target asserted REQ before
+ * a race condition where if the target asserted REQ before
* we got the DMA mode reset, the NCR5380 would have latched
* an additional byte into the INPUT DATA register and we'd
* have dropped it.
- *
- * The workaround was to transfer one fewer bytes than we
- * intended to with the pseudo-DMA read function, wait for
+ *
+ * The workaround was to transfer one fewer bytes than we
+ * intended to with the pseudo-DMA read function, wait for
* the chip to latch the last byte, read it, and then disable
* pseudo-DMA mode.
- *
+ *
* After REQ is asserted, the NCR5380 asserts DRQ and ACK.
* REQ is deasserted when ACK is asserted, and not reasserted
* until ACK goes false. Since the NCR5380 won't lower ACK
* until DACK is asserted, which won't happen unless we twiddle
- * the DMA port or we take the NCR5380 out of DMA mode, we
- * can guarantee that we won't handshake another extra
+ * the DMA port or we take the NCR5380 out of DMA mode, we
+ * can guarantee that we won't handshake another extra
* byte.
*/
@@ -1698,8 +1698,8 @@ static int NCR5380_transfer_dma(struct S
foo = NCR5380_pwrite(instance, d, c);
if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
- * Wait for the last byte to be sent. If REQ is being asserted for
- * the byte we're interested, we'll ACK it and it will go false.
+ * Wait for the last byte to be sent. If REQ is being asserted for
+ * the byte we're interested, we'll ACK it and it will go false.
*/
if (NCR5380_poll_politely2(instance,
BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
@@ -1723,17 +1723,17 @@ static int NCR5380_transfer_dma(struct S
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
- * Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
+ * Purpose : run through the various SCSI phases and do as the target
+ * directs us to. Operates on the currently connected command,
* instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
- * Side effects : SCSI things happen, the disconnected queue will be
+ * Side effects : SCSI things happen, the disconnected queue will be
* modified if a command disconnects, *instance->connected will
* change.
*
- * XXX Note : we need to watch for bus free or a reset condition here
+ * XXX Note : we need to watch for bus free or a reset condition here
* to recover from an unexpected bus free condition.
*/
@@ -1780,7 +1780,7 @@ static void NCR5380_information_transfer
return;
#endif
case PHASE_DATAIN:
- /*
+ /*
* If there is no room left in the current buffer in the
* scatter-gather list, move onto the next one.
*/
@@ -1795,7 +1795,7 @@ static void NCR5380_information_transfer
cmd->SCp.buffers_residual);
}
/*
- * The preferred transfer method is going to be
+ * The preferred transfer method is going to be
* PSEUDO-DMA for systems that are strictly PIO,
* since we can let the hardware do the handshaking.
*
@@ -1871,8 +1871,8 @@ static void NCR5380_information_transfer
complete_cmd(instance, cmd);
}
- /*
- * Restore phase bits to 0 so an interrupted selection,
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
@@ -1903,8 +1903,8 @@ static void NCR5380_information_transfer
instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
cmd, scmd_id(cmd), cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
@@ -1913,14 +1913,14 @@ static void NCR5380_information_transfer
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
- /*
+ /*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
- * operation, in violation of the SCSI spec so we can safely
+ * operation, in violation of the SCSI spec so we can safely
* ignore SAVE/RESTORE pointers calls.
*
- * Unfortunately, some disks violate the SCSI spec and
+ * Unfortunately, some disks violate the SCSI spec and
* don't issue the required SAVE_POINTERS message before
- * disconnecting, and we have to break spec to remain
+ * disconnecting, and we have to break spec to remain
* compatible.
*/
case SAVE_POINTERS:
@@ -1983,8 +1983,8 @@ static void NCR5380_information_transfer
/* Fall through to reject message */
- /*
- * If we get something weird that we aren't expecting,
+ /*
+ * If we get something weird that we aren't expecting,
* reject it.
*/
default:
@@ -2021,10 +2021,10 @@ static void NCR5380_information_transfer
case PHASE_CMDOUT:
len = cmd->cmd_len;
data = cmd->cmnd;
- /*
- * XXX for performance reasons, on machines with a
- * PSEUDO-DMA architecture we should probably
- * use the dma transfer function.
+ /*
+ * XXX for performance reasons, on machines with a
+ * PSEUDO-DMA architecture we should probably
+ * use the dma transfer function.
*/
NCR5380_transfer_pio(instance, &phase, &len, &data);
break;
@@ -2049,10 +2049,10 @@ static void NCR5380_information_transfer
/*
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
- * Purpose : does reselection, initializing the instance->connected
+ * Purpose : does reselection, initializing the instance->connected
* field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
* nexus has been reestablished,
- *
+ *
* Inputs : instance - this instance of the NCR5380.
*/
@@ -2077,7 +2077,7 @@ static void NCR5380_reselect(struct Scsi
dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
- /*
+ /*
* At this point, we have detected that our SCSI ID is on the bus,
* SEL is true and BSY was false for at least one bus settle delay
* (400 ns).
@@ -2172,7 +2172,7 @@ static void NCR5380_reselect(struct Scsi
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*
@@ -2190,7 +2190,7 @@ static void NCR5380_dma_complete(NCR5380
*
* Wait for final byte to transfer, ie wait for ACK to go false.
*
- * We should use the Last Byte Sent bit, unfortunately this is
+ * We should use the Last Byte Sent bit, unfortunately this is
* not available on the 5380/5381 (only the various CMOS chips)
*
* FIXME: timeout, and need to handle long timeout/irq case
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (67 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 68/78] ncr5380: Fix trailing whitespace using regexp Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 7:54 ` Joe Perches
2016-01-03 5:06 ` [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
` (9 subsequent siblings)
78 siblings, 1 reply; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-regexp-comment-whitespace --]
[-- Type: text/plain, Size: 27430 bytes --]
Hanging indentation was a poor choice for the text inside comments. It
has been used in the wrong places and done badly elsewhere. There is
little consistency within any file. One fork of the core driver uses
tabs for this indentation while the other uses spaces. Better to use
flush-left alignment throughout.
This patch is the result of the following substitution. It replaces tabs
and spaces at the start of a comment line with a single space.
perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c
This removes some unimportant discrepancies between the two core driver
forks so that the important ones become obvious, to facilitate
reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 206 +++++++++++++++++++++----------------------
drivers/scsi/atari_NCR5380.c | 108 +++++++++++-----------
2 files changed, 157 insertions(+), 157 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:42.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:44.000000000 +1100
@@ -1,15 +1,15 @@
/*
* NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * architecture.
*
- * Note that these routines also work with NR53c400 family chips.
+ * Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
*
* For more information, please consult
*
@@ -32,15 +32,15 @@
/*
* Further development / testing that should be done :
* 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
- * end of a pseudo-DMA read operation.
+ * code so that everything does the same thing that's done at the
+ * end of a pseudo-DMA read operation.
*
* 2. Fix REAL_DMA (interrupt driven, polled works fine) -
- * basically, transfer size needs to be reduced by one
- * and the last byte read as is done with PSEUDO_DMA.
+ * basically, transfer size needs to be reduced by one
+ * and the last byte read as is done with PSEUDO_DMA.
*
* 4. Test SCSI-II tagged queueing (I have no devices which support
- * tagged queueing)
+ * tagged queueing)
*/
#ifndef notyet
@@ -118,24 +118,24 @@
*
* These macros control options :
* AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
+ * defined.
*
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
+ * transceivers.
*
* DONT_USE_INTR - if defined, never use interrupts, even if we probe or
- * override-configure an IRQ.
+ * override-configure an IRQ.
*
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
- * rely on phase mismatch and EOP interrupts to determine end
- * of phase.
+ * rely on phase mismatch and EOP interrupts to determine end
+ * of phase.
*
* These macros MUST be defined :
*
@@ -144,17 +144,17 @@
* NCR5380_write(register, value) - write to the specific register
*
* NCR5380_implementation_fields - additional fields needed for this
- * specific implementation of the NCR5380
+ * specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
+ * that they were able to program the controller for.
*
* Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
+ * available as NCR5380_i386_dma_write_setup,
+ * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
@@ -174,10 +174,10 @@ static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
/**
- * initialize_SCp - init the scsi pointer field
- * @cmd: command block to set up
+ * initialize_SCp - init the scsi pointer field
+ * @cmd: command block to set up
*
- * Set up the internal fields in the SCSI command.
+ * Set up the internal fields in the SCSI command.
*/
static inline void initialize_SCp(struct scsi_cmnd *cmd)
@@ -318,10 +318,10 @@ mrs[] = {
};
/**
- * NCR5380_print - print scsi bus signals
- * @instance: adapter state to dump
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
- * Print the SCSI bus signals for debugging purposes
+ * Print the SCSI bus signals for debugging purposes
*/
static void NCR5380_print(struct Scsi_Host *instance)
@@ -355,10 +355,10 @@ static void NCR5380_print(struct Scsi_Ho
/**
- * NCR5380_print_phase - show SCSI phase
- * @instance: adapter to dump
+ * NCR5380_print_phase - show SCSI phase
+ * @instance: adapter to dump
*
- * Print the current SCSI phase for debugging purposes
+ * Print the current SCSI phase for debugging purposes
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -380,13 +380,13 @@ static void NCR5380_print_phase(struct S
static int probe_irq __initdata;
/**
- * probe_intr - helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
+ * probe_intr - helper for IRQ autoprobe
+ * @irq: interrupt number
+ * @dev_id: unused
+ * @regs: unused
*
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
+ * Set a flag to indicate the IRQ in question was received. This is
+ * used by the IRQ probe code.
*/
static irqreturn_t __init probe_intr(int irq, void *dev_id)
@@ -396,12 +396,12 @@ static irqreturn_t __init probe_intr(int
}
/**
- * NCR5380_probe_irq - find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
+ * NCR5380_probe_irq - find the IRQ of an NCR5380
+ * @instance: NCR5380 controller
+ * @possible: bitmask of ISA IRQ lines
*
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
+ * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
*/
static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
@@ -447,10 +447,10 @@ static int __init __maybe_unused NCR5380
}
/**
- * NCR58380_info - report driver and host information
- * @instance: relevant scsi host instance
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * For use as the host template info() handler.
+ * For use as the host template info() handler.
*/
static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -522,17 +522,17 @@ static int __maybe_unused NCR5380_show_i
#endif
/**
- * NCR5380_init - initialise an NCR5380
- * @instance: adapter to configure
- * @flags: control flags
+ * NCR5380_init - initialise an NCR5380
+ * @instance: adapter to configure
+ * @flags: control flags
*
- * Initializes *instance and corresponding 5380 chip,
- * with flags OR'd into the initial flags value.
+ * Initializes *instance and corresponding 5380 chip,
+ * with flags OR'd into the initial flags value.
*
- * Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * Notes : I assume that the host, hostno, and id bits have been
+ * set correctly. I don't care about the irq and other fields.
*
- * Returns 0 for success
+ * Returns 0 for success
*/
static int NCR5380_init(struct Scsi_Host *instance, int flags)
@@ -648,8 +648,8 @@ static int NCR5380_maybe_reset_bus(struc
}
/**
- * NCR5380_exit - remove an NCR5380
- * @instance: adapter to remove
+ * NCR5380_exit - remove an NCR5380
+ * @instance: adapter to remove
*/
static void NCR5380_exit(struct Scsi_Host *instance)
@@ -801,12 +801,12 @@ static void requeue_cmd(struct Scsi_Host
}
/**
- * NCR5380_main - NCR state machines
+ * NCR5380_main - NCR state machines
*
- * NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
+ * NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * in case it is not running.
*/
static void NCR5380_main(struct work_struct *work)
@@ -979,31 +979,31 @@ static irqreturn_t NCR5380_intr(int irq,
/*
* Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
+ * target lives, cmd - SCSI command to execute.
*
* Returns cmd if selection failed but should be retried,
* NULL if selection failed and should not be retried, or
* NULL if selection succeeded (hostdata->connected == cmd).
*
* Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
- *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * with registers as they should have been on entry - ie
+ * SELECT_ENABLE will be set appropriately, the NCR5380
+ * will cease to drive any SCSI bus signals.
+ *
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
*
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
+ * If failed (no target) : cmd->scsi_done() will be called, and the
+ * cmd->result host byte set to DID_BAD_TARGET.
*/
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
@@ -1212,8 +1212,8 @@ static struct scsi_cmnd *NCR5380_select(
* until it wraps back to 0.
*
* XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
+ * which claim to support tagged queuing but fail when more than
+ * some number of commands are issued at once.
*/
/* Wait for start of REQ/ACK handshake */
@@ -1261,19 +1261,19 @@ out:
/*
* Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
* XXX Note : handling for bus free may be useful.
*/
@@ -1353,11 +1353,11 @@ static int NCR5380_transfer_pio(struct S
/*
* We have several special cases to consider during REQ/ACK handshaking :
* 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
+ * message. ATN must be dropped as ACK is dropped.
*
* 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
*
* 3. ACK and ATN are clear and the target may proceed as normal.
*/
@@ -1478,20 +1478,20 @@ timeout:
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
- * or pseudo DMA.
+ * or pseudo DMA.
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*/
@@ -1547,8 +1547,8 @@ static int NCR5380_transfer_dma(struct S
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
/*
- * On the PAS16 at least I/O recovery delays are not needed here.
- * Everyone else seems to want them.
+ * On the PAS16 at least I/O recovery delays are not needed here.
+ * Everyone else seems to want them.
*/
if (p & SR_IO) {
@@ -1724,17 +1724,17 @@ static int NCR5380_transfer_dma(struct S
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
* Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
- * instance->connected.
+ * directs us to. Operates on the currently connected command,
+ * instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
* Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
+ * modified if a command disconnects, *instance->connected will
+ * change.
*
* XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
+ * to recover from an unexpected bus free condition.
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance) {
@@ -2050,8 +2050,8 @@ static void NCR5380_information_transfer
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
+ * nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
*/
@@ -2172,12 +2172,12 @@ static void NCR5380_reselect(struct Scsi
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*
* Returns : pointer to the scsi_cmnd structure for which the I_T_L
- * nexus has been reestablished, on failure NULL is returned.
+ * nexus has been reestablished, on failure NULL is returned.
*/
#ifdef REAL_DMA
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:40.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:44.000000000 +1100
@@ -1,15 +1,15 @@
/*
* NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * architecture.
*
- * Note that these routines also work with NR53c400 family chips.
+ * Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
*
* For more information, please consult
*
@@ -93,10 +93,10 @@
*
* These macros control options :
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
+ * transceivers.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
@@ -109,17 +109,17 @@
* NCR5380_write(register, value) - write to the specific register
*
* NCR5380_implementation_fields - additional fields needed for this
- * specific implementation of the NCR5380
+ * specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
+ * that they were able to program the controller for.
*
* Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
+ * available as NCR5380_i386_dma_write_setup,
+ * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
@@ -974,7 +974,7 @@ static void NCR5380_main(struct work_str
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : Called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*/
@@ -1161,31 +1161,31 @@ static irqreturn_t NCR5380_intr(int irq,
/*
* Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
+ * target lives, cmd - SCSI command to execute.
*
* Returns cmd if selection failed but should be retried,
* NULL if selection failed and should not be retried, or
* NULL if selection succeeded (hostdata->connected == cmd).
*
* Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
- *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * with registers as they should have been on entry - ie
+ * SELECT_ENABLE will be set appropriately, the NCR5380
+ * will cease to drive any SCSI bus signals.
+ *
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
*
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
+ * If failed (no target) : cmd->scsi_done() will be called, and the
+ * cmd->result host byte set to DID_BAD_TARGET.
*/
static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
@@ -1398,8 +1398,8 @@ static struct scsi_cmnd *NCR5380_select(
* until it wraps back to 0.
*
* XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
+ * which claim to support tagged queuing but fail when more than
+ * some number of commands are issued at once.
*/
/* Wait for start of REQ/ACK handshake */
@@ -1461,19 +1461,19 @@ out:
/*
* Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes are transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes are transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
* XXX Note : handling for bus free may be useful.
*/
@@ -1560,11 +1560,11 @@ static int NCR5380_transfer_pio(struct S
/*
* We have several special cases to consider during REQ/ACK handshaking :
* 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
+ * message. ATN must be dropped as ACK is dropped.
*
* 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
*
* 3. ACK and ATN are clear and the target may proceed as normal.
*/
@@ -1687,20 +1687,20 @@ timeout:
#if defined(REAL_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
- * or pseudo DMA.
+ * or pseudo DMA.
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*/
@@ -1799,17 +1799,17 @@ static int NCR5380_transfer_dma(struct S
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
* Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
- * instance->connected.
+ * directs us to. Operates on the currently connected command,
+ * instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
* Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
+ * modified if a command disconnects, *instance->connected will
+ * change.
*
* XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
+ * to recover from an unexpected bus free condition.
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance)
@@ -1919,7 +1919,7 @@ static void NCR5380_information_transfer
*/
/* ++roman: I suggest, this should be
- * #if def(REAL_DMA)
+ * #if def(REAL_DMA)
* instead of leaving REAL_DMA out.
*/
@@ -2215,8 +2215,8 @@ static void NCR5380_information_transfer
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
+ * nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
*/
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
@ 2016-01-03 7:54 ` Joe Perches
2016-01-03 8:17 ` Finn Thain
2016-01-03 14:10 ` One Thousand Gnomes
0 siblings, 2 replies; 94+ messages in thread
From: Joe Perches @ 2016-01-03 7:54 UTC (permalink / raw)
To: Finn Thain, James E.J. Bottomley, Martin K. Petersen,
Michael Schmitz, linux-m68k, linux-scsi, linux-kernel
On Sun, 2016-01-03 at 16:06 +1100, Finn Thain wrote:
> Hanging indentation was a poor choice for the text inside comments. It
> has been used in the wrong places and done badly elsewhere. There is
> little consistency within any file. One fork of the core driver uses
> tabs for this indentation while the other uses spaces. Better to use
> flush-left alignment throughout.
>
> This patch is the result of the following substitution. It replaces tabs
> and spaces at the start of a comment line with a single space.
>
> perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c
>
> This removes some unimportant discrepancies between the two core driver
> forks so that the important ones become obvious, to facilitate
> reunification.
I still think this patch is poor at best and
overall not useful.
@@ -32,15 +32,15 @@
> /*
> * Further development / testing that should be done :
> * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
> - * code so that everything does the same thing that's done at the
> - * end of a pseudo-DMA read operation.
> + * code so that everything does the same thing that's done at the
> + * end of a pseudo-DMA read operation.
> *
> * 2. Fix REAL_DMA (interrupt driven, polled works fine) -
> - * basically, transfer size needs to be reduced by one
> - * and the last byte read as is done with PSEUDO_DMA.
> + * basically, transfer size needs to be reduced by one
> + * and the last byte read as is done with PSEUDO_DMA.
> *
> * 4. Test SCSI-II tagged queueing (I have no devices which support
> - * tagged queueing)
> + * tagged queueing)
Numbering 1, 2, then 4 could be improved.
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 7:54 ` Joe Perches
@ 2016-01-03 8:17 ` Finn Thain
2016-01-03 14:10 ` One Thousand Gnomes
1 sibling, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 8:17 UTC (permalink / raw)
To: Joe Perches
Cc: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1998 bytes --]
On Sat, 2 Jan 2016, Joe Perches wrote:
> On Sun, 2016-01-03 at 16:06 +1100, Finn Thain wrote:
> > Hanging indentation was a poor choice for the text inside comments. It
> > has been used in the wrong places and done badly elsewhere. There is
> > little consistency within any file. One fork of the core driver uses
> > tabs for this indentation while the other uses spaces. Better to use
> > flush-left alignment throughout.
> >
> > This patch is the result of the following substitution. It replaces tabs
> > and spaces at the start of a comment line with a single space.
> >
> > perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c
> >
> > This removes some unimportant discrepancies between the two core driver
> > forks so that the important ones become obvious, to facilitate
> > reunification.
>
> I still think this patch is poor at best and
> overall not useful.
Opinions will differ.
> @@ -32,15 +32,15 @@
> > /*
> > * Further development / testing that should be done :
> > * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
> > - * code so that everything does the same thing that's done at the
> > - * end of a pseudo-DMA read operation.
> > + * code so that everything does the same thing that's done at the
> > + * end of a pseudo-DMA read operation.
> > *
> > * 2. Fix REAL_DMA (interrupt driven, polled works fine) -
> > - * basically, transfer size needs to be reduced by one
> > - * and the last byte read as is done with PSEUDO_DMA.
> > + * basically, transfer size needs to be reduced by one
> > + * and the last byte read as is done with PSEUDO_DMA.
> > *
> > * 4. Test SCSI-II tagged queueing (I have no devices which support
> > - * tagged queueing)
> > + * tagged queueing)
>
> Numbering 1, 2, then 4 could be improved.
That would be churn. I have other plans for the To Do list. The numbering
will get fixed as items are removed.
--
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 7:54 ` Joe Perches
2016-01-03 8:17 ` Finn Thain
@ 2016-01-03 14:10 ` One Thousand Gnomes
2016-01-03 18:20 ` Joe Perches
1 sibling, 1 reply; 94+ messages in thread
From: One Thousand Gnomes @ 2016-01-03 14:10 UTC (permalink / raw)
To: Joe Perches
Cc: Finn Thain, James E.J. Bottomley, Martin K. Petersen,
Michael Schmitz, linux-m68k, linux-scsi, linux-kernel
On Sat, 02 Jan 2016 23:54:28 -0800
Joe Perches <joe@perches.com> wrote:
> On Sun, 2016-01-03 at 16:06 +1100, Finn Thain wrote:
> > Hanging indentation was a poor choice for the text inside comments. It
> > has been used in the wrong places and done badly elsewhere. There is
> > little consistency within any file. One fork of the core driver uses
> > tabs for this indentation while the other uses spaces. Better to use
> > flush-left alignment throughout.
> >
> > This patch is the result of the following substitution. It replaces tabs
> > and spaces at the start of a comment line with a single space.
> >
> > perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c
> >
> > This removes some unimportant discrepancies between the two core driver
> > forks so that the important ones become obvious, to facilitate
> > reunification.
>
> I still think this patch is poor at best and
> overall not useful.
I would beg to differ. As a tool for understanding the differences as you
step through the versions it's invaluable.
Alan
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 14:10 ` One Thousand Gnomes
@ 2016-01-03 18:20 ` Joe Perches
2016-01-03 21:29 ` One Thousand Gnomes
0 siblings, 1 reply; 94+ messages in thread
From: Joe Perches @ 2016-01-03 18:20 UTC (permalink / raw)
To: One Thousand Gnomes
Cc: Finn Thain, James E.J. Bottomley, Martin K. Petersen,
Michael Schmitz, linux-m68k, linux-scsi, linux-kernel
On Sun, 2016-01-03 at 14:10 +0000, One Thousand Gnomes wrote:
> On Sat, 02 Jan 2016 23:54:28 -0800
> Joe Perches <joe@perches.com> wrote:
>
> > On Sun, 2016-01-03 at 16:06 +1100, Finn Thain wrote:
> > > Hanging indentation was a poor choice for the text inside comments. It
> > > has been used in the wrong places and done badly elsewhere. There is
> > > little consistency within any file. One fork of the core driver uses
> > > tabs for this indentation while the other uses spaces. Better to use
> > > flush-left alignment throughout.
> > >
> > > This patch is the result of the following substitution. It replaces tabs
> > > and spaces at the start of a comment line with a single space.
> > >
> > > perl -i -pe 's,^(\t*[/ ]\*)[ \t]+,$1 ,' drivers/scsi/{atari_,}NCR5380.c
> > >
> > > This removes some unimportant discrepancies between the two core driver
> > > forks so that the important ones become obvious, to facilitate
> > > reunification.
> >
> > I still think this patch is poor at best and
> > overall not useful.
>
> I would beg to differ. As a tool for understanding the differences as you
> step through the versions it's invaluable.
This removes intentional formatting that
makes reading comments easier.
diff -w works well.
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 18:20 ` Joe Perches
@ 2016-01-03 21:29 ` One Thousand Gnomes
2016-01-03 21:46 ` Joe Perches
0 siblings, 1 reply; 94+ messages in thread
From: One Thousand Gnomes @ 2016-01-03 21:29 UTC (permalink / raw)
To: Joe Perches
Cc: Finn Thain, James E.J. Bottomley, Martin K. Petersen,
Michael Schmitz, linux-m68k, linux-scsi, linux-kernel
> > I would beg to differ. As a tool for understanding the differences as you
> > step through the versions it's invaluable.
>
> This removes intentional formatting that
> makes reading comments easier.
And this matters at the end of the patch series because ?
^ permalink raw reply [flat|nested] 94+ messages in thread
* Re: [PATCH v4 69/78] ncr5380: Fix whitespace in comments using regexp
2016-01-03 21:29 ` One Thousand Gnomes
@ 2016-01-03 21:46 ` Joe Perches
[not found] ` <20160103220505.7734a879@lxorguk.ukuu.org.uk>
0 siblings, 1 reply; 94+ messages in thread
From: Joe Perches @ 2016-01-03 21:46 UTC (permalink / raw)
To: One Thousand Gnomes
Cc: Finn Thain, Martin K. Petersen, Michael Schmitz, linux-m68k,
linux-scsi, linux-kernel, James E.J. Bottomley
(using an email address for James that shouldn't bounce)
On Sun, 2016-01-03 at 21:29 +0000, One Thousand Gnomes wrote:
> > > I would beg to differ. As a tool for understanding the
> > > differences as you
> > > step through the versions it's invaluable.
> >
> > This removes intentional formatting that
> > makes reading comments easier.
>
> And this matters at the end of the patch series because ?
It removes intentional formatting that makes
reading comments easier.
And diff -w still works just fine.
^ permalink raw reply [flat|nested] 94+ messages in thread
* [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (68 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 69/78] ncr5380: Fix whitespace in comments " Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
` (8 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-merge-trivia-from-atari_NCR5380 --]
[-- Type: text/plain, Size: 14707 bytes --]
In the past, NCR5380.c was overlooked by those working on atari_NCR5380.c
and this caused needless divergence. All of the changes in this patch were
taken from atari_NCR5380.c.
This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
---
drivers/scsi/NCR5380.c | 155 +++++++++++++++++++++++++++----------------------
1 file changed, 87 insertions(+), 68 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:44.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:46.000000000 +1100
@@ -174,7 +174,7 @@ static int do_abort(struct Scsi_Host *);
static void do_reset(struct Scsi_Host *);
/**
- * initialize_SCp - init the scsi pointer field
+ * initialize_SCp - init the scsi pointer field
* @cmd: command block to set up
*
* Set up the internal fields in the SCSI command.
@@ -264,19 +264,6 @@ static inline int NCR5380_poll_politely(
reg, bit, val, wait);
}
-static struct {
- unsigned char value;
- const char *name;
-} phases[] __maybe_unused = {
- {PHASE_DATAOUT, "DATAOUT"},
- {PHASE_DATAIN, "DATAIN"},
- {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"},
- {PHASE_MSGOUT, "MSGOUT"},
- {PHASE_MSGIN, "MSGIN"},
- {PHASE_UNKNOWN, "UNKNOWN"}
-};
-
#if NDEBUG
static struct {
unsigned char mask;
@@ -311,6 +298,7 @@ mrs[] = {
{MR_TARGET, "MODE TARGET"},
{MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
{MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
{MR_MONITOR_BSY, "MODE MONITOR BSY"},
{MR_DMA_MODE, "MODE DMA"},
{MR_ARBITRATE, "MODE ARBITRATION"},
@@ -318,8 +306,8 @@ mrs[] = {
};
/**
- * NCR5380_print - print scsi bus signals
- * @instance: adapter state to dump
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
* Print the SCSI bus signals for debugging purposes
*/
@@ -353,9 +341,21 @@ static void NCR5380_print(struct Scsi_Ho
printk("\n");
}
+static struct {
+ unsigned char value;
+ const char *name;
+} phases[] = {
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
+ {PHASE_UNKNOWN, "UNKNOWN"}
+};
/**
- * NCR5380_print_phase - show SCSI phase
+ * NCR5380_print_phase - show SCSI phase
* @instance: adapter to dump
*
* Print the current SCSI phase for debugging purposes
@@ -370,7 +370,9 @@ static void NCR5380_print_phase(struct S
if (!(status & SR_REQ))
shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
+ for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
+ (phases[i].value != (status & PHASE_MASK)); ++i)
+ ;
shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
@@ -511,7 +513,7 @@ static int __maybe_unused NCR5380_write_
}
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
+ struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
@@ -522,7 +524,7 @@ static int __maybe_unused NCR5380_show_i
#endif
/**
- * NCR5380_init - initialise an NCR5380
+ * NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
* @flags: control flags
*
@@ -530,7 +532,7 @@ static int __maybe_unused NCR5380_show_i
* with flags OR'd into the initial flags value.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * set correctly. I don't care about the irq and other fields.
*
* Returns 0 for success
*/
@@ -541,10 +543,9 @@ static int NCR5380_init(struct Scsi_Host
int i;
unsigned long deadline;
- if(in_interrupt())
- printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
-
+ hostdata->host = instance;
hostdata->id_mask = 1 << instance->this_id;
+ hostdata->id_higher_mask = 0;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
if (i > hostdata->id_mask)
hostdata->id_higher_mask |= i;
@@ -569,8 +570,6 @@ static int NCR5380_init(struct Scsi_Host
if (!hostdata->work_q)
return -ENOMEM;
- hostdata->host = instance;
-
prepare_info(instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -648,8 +647,10 @@ static int NCR5380_maybe_reset_bus(struc
}
/**
- * NCR5380_exit - remove an NCR5380
+ * NCR5380_exit - remove an NCR5380
* @instance: adapter to remove
+ *
+ * Assumes that no more work can be queued (e.g. by NCR5380_intr).
*/
static void NCR5380_exit(struct Scsi_Host *instance)
@@ -714,7 +715,7 @@ static int NCR5380_queue_command(struct
cmd->scsi_done(cmd);
return 0;
}
-#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
+#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
cmd->result = 0;
@@ -801,7 +802,7 @@ static void requeue_cmd(struct Scsi_Host
}
/**
- * NCR5380_main - NCR state machines
+ * NCR5380_main - NCR state machines
*
* NCR5380_main is a coroutine that runs as long as more work can
* be done on the NCR5380 host adapters in a system. Both
@@ -1067,7 +1068,9 @@ static struct scsi_cmnd *NCR5380_select(
udelay(3);
/* Check for lost arbitration */
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
+ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
+ (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
spin_lock_irq(&hostdata->lock);
@@ -1133,7 +1136,7 @@ static struct scsi_cmnd *NCR5380_select(
* The initiator shall then wait at least two deskew delays and release
* the BSY signal.
*/
- udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
+ udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
@@ -1270,7 +1273,7 @@ out:
* bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
+ * maximum number of bytes, 0 if all bytes are transferred or exit
* is in same phase.
*
* Also, *phase, *count, *data are modified in place.
@@ -1284,7 +1287,10 @@ out:
* counts, we will always do a pseudo DMA or DMA transfer.
*/
-static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
+static int NCR5380_transfer_pio(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
@@ -1295,7 +1301,7 @@ static int NCR5380_transfer_pio(struct S
* REGISTER match the STATUS REGISTER
*/
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
do {
/*
@@ -1314,6 +1320,7 @@ static int NCR5380_transfer_pio(struct S
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
+
/* Do actual transfer from SCSI bus to / from memory */
if (!(p & SR_IO))
NCR5380_write(OUTPUT_DATA_REG, *d);
@@ -1451,12 +1458,14 @@ static int do_abort(struct Scsi_Host *in
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
if (tmp != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
if (rc < 0)
goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
+
tmp = ABORT;
msgptr = &tmp;
len = 1;
@@ -1495,7 +1504,11 @@ timeout:
*/
-static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
+static int NCR5380_transfer_dma(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
register int c = *count;
register unsigned char p = *phase;
register unsigned char *d = *data;
@@ -1506,8 +1519,6 @@ static int NCR5380_transfer_dma(struct S
unsigned char saved_data = 0, overrun = 0, residue;
#endif
- struct NCR5380_hostdata *hostdata = shost_priv(instance);
-
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
@@ -1737,7 +1748,8 @@ static int NCR5380_transfer_dma(struct S
* to recover from an unexpected bus free condition.
*/
-static void NCR5380_information_transfer(struct Scsi_Host *instance) {
+static void NCR5380_information_transfer(struct Scsi_Host *instance)
+{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
@@ -1764,11 +1776,13 @@ static void NCR5380_information_transfer
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
sink = 0;
continue;
}
+
switch (phase) {
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
@@ -1794,6 +1808,7 @@ static void NCR5380_information_transfer
cmd->SCp.this_residual,
cmd->SCp.buffers_residual);
}
+
/*
* The preferred transfer method is going to be
* PSEUDO-DMA for systems that are strictly PIO,
@@ -1812,13 +1827,15 @@ static void NCR5380_information_transfer
if (transfersize) {
len = transfersize;
- if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) {
+ if (NCR5380_transfer_dma(instance, &phase,
+ &len, (unsigned char **)&cmd->SCp.ptr)) {
/*
- * If the watchdog timer fires, all future accesses to this
- * device will use the polled-IO.
+ * If the watchdog timer fires, all future
+ * accesses to this device will use the
+ * polled-IO.
*/
scmd_printk(KERN_INFO, cmd,
- "switching to slow handshake\n");
+ "switching to slow handshake\n");
cmd->device->borken = 1;
sink = 1;
do_abort(instance);
@@ -1894,25 +1911,24 @@ static void NCR5380_information_transfer
break;
}
break;
- case DISCONNECT:{
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- hostdata->connected = NULL;
- list_add(&ncmd->list, &hostdata->disconnected);
- dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
- instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
- cmd, scmd_id(cmd), cmd->device->lun);
+ case DISCONNECT:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ hostdata->connected = NULL;
+ list_add(&ncmd->list, &hostdata->disconnected);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
+ * arbitration can resume.
+ */
+ NCR5380_write(TARGET_COMMAND_REG, 0);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return;
- }
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return;
/*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
* operation, in violation of the SCSI spec so we can safely
@@ -1994,15 +2010,17 @@ static void NCR5380_information_transfer
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown message %02x\n",tmp);
+ "rejecting unknown message %02x\n",
+ tmp);
else
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]);
+ "rejecting unknown extended message code %02x, length %d\n",
+ extended_msg[1], extended_msg[0]);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
break;
- } /* switch (tmp) */
+ } /* switch (tmp) */
break;
case PHASE_MSGOUT:
len = 1;
@@ -2037,7 +2055,7 @@ static void NCR5380_information_transfer
default:
shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
- } /* switch(phase) */
+ } /* switch(phase) */
} else {
spin_unlock_irq(&hostdata->lock);
NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
@@ -2056,7 +2074,8 @@ static void NCR5380_information_transfer
* Inputs : instance - this instance of the NCR5380.
*/
-static void NCR5380_reselect(struct Scsi_Host *instance) {
+static void NCR5380_reselect(struct Scsi_Host *instance)
+{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun, phase;
@@ -2153,8 +2172,8 @@ static void NCR5380_reselect(struct Scsi
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
target_mask, lun);
/*
- * Since we have an established nexus that we can't do anything with,
- * we must abort it.
+ * Since we have an established nexus that we can't do anything
+ * with, we must abort it.
*/
do_abort(instance);
return;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (69 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 70/78] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses Finn Thain
` (7 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: atari_NCR5380-merge-trivia-from-NCR5380 --]
[-- Type: text/plain, Size: 5010 bytes --]
In the past, atari_NCR5380.c was overlooked by those working on NCR5380.c
and this caused needless divergence. All of the changes in this patch were
taken from NCR5380.c.
This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/atari_NCR5380.c | 84 ++++++++++++++++++++++++++-----------------
1 file changed, 52 insertions(+), 32 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:44.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:48.000000000 +1100
@@ -443,22 +443,39 @@ static struct {
unsigned char mask;
const char *name;
} signals[] = {
- { SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
- { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
- { SR_SEL, "SEL" }, {0, NULL}
-}, basrs[] = {
- {BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}
-}, icrs[] = {
- {ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {SR_DBP, "PARITY"},
+ {SR_RST, "RST"},
+ {SR_BSY, "BSY"},
+ {SR_REQ, "REQ"},
+ {SR_MSG, "MSG"},
+ {SR_CD, "CD"},
+ {SR_IO, "IO"},
+ {SR_SEL, "SEL"},
{0, NULL}
-}, mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
- "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
+},
+basrs[] = {
+ {BASR_ATN, "ATN"},
+ {BASR_ACK, "ACK"},
+ {0, NULL}
+},
+icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"},
+ {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"},
+ {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {0, NULL}
+},
+mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
+ {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
{MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
+ {MR_DMA_MODE, "MODE DMA"},
+ {MR_ARBITRATE, "MODE ARBITRATION"},
{0, NULL}
};
@@ -502,8 +519,12 @@ static struct {
unsigned char value;
const char *name;
} phases[] = {
- {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
{PHASE_UNKNOWN, "UNKNOWN"}
};
@@ -529,7 +550,6 @@ static void NCR5380_print_phase(struct S
shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
-
#endif
/**
@@ -1488,9 +1508,9 @@ static int NCR5380_transfer_pio(struct S
unsigned char *phase, int *count,
unsigned char **data)
{
- register unsigned char p = *phase, tmp;
- register int c = *count;
- register unsigned char *d = *data;
+ unsigned char p = *phase, tmp;
+ int c = *count;
+ unsigned char *d = *data;
/*
* The NCR5380 chip will only drive the SCSI bus when the
@@ -1557,17 +1577,17 @@ static int NCR5380_transfer_pio(struct S
dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
- /*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
- *
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3. ACK and ATN are clear and the target may proceed as normal.
- */
+/*
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * message. ATN must be dropped as ACK is dropped.
+ *
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
+ *
+ * 3. ACK and ATN are clear and the target may proceed as normal.
+ */
if (!(p == PHASE_MSGIN && c == 1)) {
if (p == PHASE_MSGOUT && c > 1)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1632,7 +1652,7 @@ static void do_reset(struct Scsi_Host *i
static int do_abort(struct Scsi_Host *instance)
{
- unsigned char tmp, *msgptr, phase;
+ unsigned char *msgptr, phase, tmp;
int len;
int rc;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (70 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 71/78] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
` (6 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
[-- Attachment #1: ncr5380-fix-whitespace-and-trivia --]
[-- Type: text/plain, Size: 7734 bytes --]
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
---
drivers/scsi/NCR5380.c | 30 +++++++++++++++++++-----------
drivers/scsi/atari_NCR5380.c | 26 +++++++++++++-------------
2 files changed, 32 insertions(+), 24 deletions(-)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2016-01-03 16:04:46.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2016-01-03 16:04:49.000000000 +1100
@@ -1113,7 +1113,7 @@ static struct scsi_cmnd *NCR5380_select(
* the host and target ID's on the SCSI bus.
*/
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd))));
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd)));
/*
* Raise ATN while SEL is true before BSY goes false from arbitration,
@@ -1121,7 +1121,8 @@ static struct scsi_cmnd *NCR5380_select(
* phase immediately after selection.
*/
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL);
NCR5380_write(MODE_REG, MR_BASE);
/*
@@ -1139,7 +1140,8 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
+ ICR_ASSERT_ATN | ICR_ASSERT_SEL);
/*
* Something weird happens when we cease to drive BSY - looks
@@ -1249,7 +1251,7 @@ static struct scsi_cmnd *NCR5380_select(
/* XXX need to handle errors here */
hostdata->connected = cmd;
- hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF));
+ hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
initialize_SCp(cmd);
@@ -1340,11 +1342,14 @@ static int NCR5380_transfer_pio(struct S
if (!((p & SR_MSG) && c > 1)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ACK);
} else {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN);
NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
}
} else {
NCR5380_dprint(NDEBUG_PIO, instance);
@@ -1775,10 +1780,12 @@ static void NCR5380_information_transfer
if (sink && (phase != PHASE_MSGOUT)) {
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
+ ICR_ASSERT_ACK);
while (NCR5380_read(STATUS_REG) & SR_REQ)
;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_ATN);
sink = 0;
continue;
}
@@ -1848,8 +1855,9 @@ static void NCR5380_information_transfer
#endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */
{
spin_unlock_irq(&hostdata->lock);
- NCR5380_transfer_pio(instance, &phase, (int *) &cmd->SCp.this_residual, (unsigned char **)
- &cmd->SCp.ptr);
+ NCR5380_transfer_pio(instance, &phase,
+ (int *)&cmd->SCp.this_residual,
+ (unsigned char **)&cmd->SCp.ptr);
spin_lock_irq(&hostdata->lock);
}
break;
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:48.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2016-01-03 16:04:49.000000000 +1100
@@ -1314,7 +1314,7 @@ static struct scsi_cmnd *NCR5380_select(
* the host and target ID's on the SCSI bus.
*/
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id)));
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd)));
/*
* Raise ATN while SEL is true before BSY goes false from arbitration,
@@ -1322,8 +1322,8 @@ static struct scsi_cmnd *NCR5380_select(
* phase immediately after selection.
*/
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL ));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL);
NCR5380_write(MODE_REG, MR_BASE);
/*
@@ -1341,8 +1341,8 @@ static struct scsi_cmnd *NCR5380_select(
udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA |
- ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
+ ICR_ASSERT_ATN | ICR_ASSERT_SEL);
/*
* Something weird happens when we cease to drive BSY - looks
@@ -1462,7 +1462,7 @@ static struct scsi_cmnd *NCR5380_select(
hostdata->connected = cmd;
#ifndef SUPPORT_TAGS
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
#endif
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_INTR;
@@ -1558,13 +1558,13 @@ static int NCR5380_transfer_pio(struct S
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ACK);
+ ICR_ASSERT_DATA | ICR_ASSERT_ACK);
} else {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN);
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN);
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
}
} else {
NCR5380_dprint(NDEBUG_PIO, instance);
@@ -1892,11 +1892,11 @@ static void NCR5380_information_transfer
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
+ ICR_ASSERT_ACK);
while (NCR5380_read(STATUS_REG) & SR_REQ)
;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
+ ICR_ASSERT_ATN);
sink = 0;
continue;
}
@@ -1985,8 +1985,8 @@ static void NCR5380_information_transfer
{
spin_unlock_irq(&hostdata->lock);
NCR5380_transfer_pio(instance, &phase,
- (int *)&cmd->SCp.this_residual,
- (unsigned char **)&cmd->SCp.ptr);
+ (int *)&cmd->SCp.this_residual,
+ (unsigned char **)&cmd->SCp.ptr);
spin_lock_irq(&hostdata->lock);
}
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (71 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 72/78] ncr5380: Cleanup whitespace and parentheses Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 74/78] ncr5380: Use runtime register mapping Finn Thain
` (5 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 72-71 --]
[-- Type: text/plain, Size: 1088 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
Pseudo-DMA (PDMA) has been broken for ages, resulting in hangs on
53C400-based cards.
According to 53C400 datasheet, PDMA transfer length must be a multiple
of 128. Check if that's true and use PIO if it's not.
This makes PDMA work on 53C400 (Canon FG2-5202).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/g_NCR5380.c | 4 ++++
1 file changed, 4 insertions(+)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:38.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:50.000000000 +1100
@@ -702,6 +702,10 @@ static int generic_NCR5380_dma_xfer_len(
!(cmd->SCp.this_residual % transfersize))
transfersize = 32 * 1024;
+ /* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
+ if (transfersize % 128)
+ transfersize = 0;
+
return transfersize;
}
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 74/78] ncr5380: Use runtime register mapping
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (72 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 73/78] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A Finn Thain
` (4 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 73-71 --]
[-- Type: text/plain, Size: 10244 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
Convert compile-time C400_ register mapping to runtime mapping.
This removes the weird negative register offsets and allows adding
additional mappings.
While at it, convert read/write loops into insb/outsb.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/NCR5380.h | 13 ------
drivers/scsi/g_NCR5380.c | 88 +++++++++++++++++++++--------------------------
drivers/scsi/g_NCR5380.h | 12 ++++--
3 files changed, 49 insertions(+), 64 deletions(-)
Index: linux/drivers/scsi/NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/NCR5380.h 2016-01-03 16:04:30.000000000 +1100
+++ linux/drivers/scsi/NCR5380.h 2016-01-03 16:04:51.000000000 +1100
@@ -163,8 +163,7 @@
/* Write any value to this register to start an ini mode DMA receive */
#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
-#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
-
+/* NCR 53C400(A) Control Status Register bits: */
#define CSR_RESET 0x80 /* wo Resets 53c400 */
#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
@@ -181,16 +180,6 @@
#define CSR_BASE CSR_53C80_INTR
#endif
-/* Number of 128-byte blocks to be transferred */
-#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
-
-/* Resume transfer after disconnect */
-#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
-
-/* Access to host buffer stack */
-#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
-
-
/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:50.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:51.000000000 +1100
@@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect
};
int flags;
struct Scsi_Host *instance;
+ struct NCR5380_hostdata *hostdata;
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
@@ -394,6 +395,7 @@ static int __init generic_NCR5380_detect
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL)
goto out_release;
+ hostdata = shost_priv(instance);
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
@@ -403,18 +405,27 @@ static int __init generic_NCR5380_detect
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
* the base address.
*/
- if (overrides[current_override].board == BOARD_NCR53C400)
+ if (overrides[current_override].board == BOARD_NCR53C400) {
instance->io_port += 8;
+ hostdata->c400_ctl_status = 0;
+ hostdata->c400_blk_cnt = 1;
+ hostdata->c400_host_buf = 4;
+ }
#else
instance->base = overrides[current_override].NCR5380_map_name;
- ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
+ hostdata->iomem = iomem;
+ if (overrides[current_override].board == BOARD_NCR53C400) {
+ hostdata->c400_ctl_status = 0x100;
+ hostdata->c400_blk_cnt = 0x101;
+ hostdata->c400_host_buf = 0x104;
+ }
#endif
if (NCR5380_init(instance, flags))
goto out_unregister;
if (overrides[current_override].board == BOARD_NCR53C400)
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_maybe_reset_bus(instance);
@@ -522,31 +533,25 @@ generic_NCR5380_biosparam(struct scsi_de
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
-#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
-#endif
int blocks = len / 128;
int start = 0;
- int bl;
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
@@ -557,17 +562,12 @@ static inline int NCR5380_pread(struct S
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
- {
- // FIXME - no timeout
- }
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
@@ -577,7 +577,7 @@ static inline int NCR5380_pread(struct S
blocks--;
}
- if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
#if 0
@@ -585,7 +585,7 @@ static inline int NCR5380_pread(struct S
* DON'T DO THIS - THEY NEVER ARRIVE!
*/
printk("53C400r: Waiting for 53C80 registers\n");
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
;
#endif
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
@@ -606,32 +606,26 @@ static inline int NCR5380_pread(struct S
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
-#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
-#endif
int blocks = len / 128;
int start = 0;
- int bl;
int i;
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
@@ -641,14 +635,12 @@ static inline int NCR5380_pwrite(struct
blocks--;
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
@@ -660,7 +652,7 @@ static inline int NCR5380_pwrite(struct
#if 0
printk("53C400w: waiting for registers to be available\n");
- THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
+ THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
printk("53C400w: Got em\n");
#endif
@@ -668,7 +660,7 @@ static inline int NCR5380_pwrite(struct
/* All documentation says to check for this. Maybe my hardware is too
* fast. Waiting for it seems to work fine! KLL
*/
- while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
; // FIXME - no timeout
/*
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:03.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:51.000000000 +1100
@@ -29,7 +29,6 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
-#define NCR53C400_register_offset 0
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
@@ -42,7 +41,10 @@
#define NCR5380_write(reg, value) \
outb(value, instance->io_port + (reg))
-#define NCR5380_implementation_fields /* none */
+#define NCR5380_implementation_fields \
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf;
#else
/* therefore SCSI_G_NCR5380_MEM */
@@ -50,7 +52,6 @@
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
-#define NCR53C400_register_offset 0x108
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
@@ -63,7 +64,10 @@
NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
- void __iomem *iomem;
+ void __iomem *iomem; \
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf;
#endif
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (73 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 74/78] ncr5380: Use runtime register mapping Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips Finn Thain
` (3 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 74-71 --]
[-- Type: text/plain, Size: 2497 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
Add I/O register mapping for NCR53C400A and enable PDMA mode to
improve performance and fix non-working IRQ.
Tested with HP C2502 (and user-space enabler).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
Changes to Ondrej's version:
- An 'if' statement is now a 'switch' statement.
- Throw an error if MMIO register locations are not known.
---
drivers/scsi/g_NCR5380.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:51.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:53.000000000 +1100
@@ -323,7 +323,7 @@ static int __init generic_NCR5380_detect
#endif
break;
case BOARD_NCR53C400A:
- flags = FLAG_NO_PSEUDO_DMA;
+ flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
break;
case BOARD_DTC3181E:
@@ -405,27 +405,42 @@ static int __init generic_NCR5380_detect
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
* the base address.
*/
- if (overrides[current_override].board == BOARD_NCR53C400) {
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
instance->io_port += 8;
hostdata->c400_ctl_status = 0;
hostdata->c400_blk_cnt = 1;
hostdata->c400_host_buf = 4;
+ break;
+ case BOARD_NCR53C400A:
+ hostdata->c400_ctl_status = 9;
+ hostdata->c400_blk_cnt = 10;
+ hostdata->c400_host_buf = 8;
+ break;
}
#else
instance->base = overrides[current_override].NCR5380_map_name;
hostdata->iomem = iomem;
- if (overrides[current_override].board == BOARD_NCR53C400) {
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
hostdata->c400_ctl_status = 0x100;
hostdata->c400_blk_cnt = 0x101;
hostdata->c400_host_buf = 0x104;
+ break;
+ case BOARD_NCR53C400A:
+ pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+ goto out_unregister;
}
#endif
if (NCR5380_init(instance, flags))
goto out_unregister;
- if (overrides[current_override].board == BOARD_NCR53C400)
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
+ case BOARD_NCR53C400A:
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ }
NCR5380_maybe_reset_bus(instance);
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (74 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 75/78] ncr5380: Enable PDMA for NCR53C400A Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
` (2 subsequent siblings)
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 76-71 --]
[-- Type: text/plain, Size: 5318 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
Add I/O register mapping for DTC chips and enable PDMA mode.
These chips have 16-bit wide HOST BUFFER register and it must be read
by 16-bit accesses (we lose data otherwise).
Large PIO transfers crash at least the DTCT-436P chip (all reads result
in 0xFF) so this patch actually makes it work.
The chip also crashes when we bang on the C400 host status register too
heavily after PDMA write - a small udelay is needed.
Tested on DTCT-436P and verified that it does not break 53C400A.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
Changes to Ondrej's version:
- Rebased.
---
drivers/scsi/g_NCR5380.c | 38 +++++++++++++++++++++++++++++++-------
drivers/scsi/g_NCR5380.h | 3 ++-
2 files changed, 33 insertions(+), 8 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:53.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:54.000000000 +1100
@@ -327,7 +327,7 @@ static int __init generic_NCR5380_detect
ports = ncr_53c400a_ports;
break;
case BOARD_DTC3181E:
- flags = FLAG_NO_PSEUDO_DMA;
+ flags = FLAG_NO_DMA_FIXUP;
ports = dtc_3181e_ports;
break;
}
@@ -400,6 +400,7 @@ static int __init generic_NCR5380_detect
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
instance->n_io_port = region_size;
+ hostdata->io_width = 1; /* 8-bit PDMA by default */
/*
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
@@ -412,6 +413,9 @@ static int __init generic_NCR5380_detect
hostdata->c400_blk_cnt = 1;
hostdata->c400_host_buf = 4;
break;
+ case BOARD_DTC3181E:
+ hostdata->io_width = 2; /* 16-bit PDMA */
+ /* fall through */
case BOARD_NCR53C400A:
hostdata->c400_ctl_status = 9;
hostdata->c400_blk_cnt = 10;
@@ -427,6 +431,7 @@ static int __init generic_NCR5380_detect
hostdata->c400_blk_cnt = 0x101;
hostdata->c400_host_buf = 0x104;
break;
+ case BOARD_DTC3181E:
case BOARD_NCR53C400A:
pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
goto out_unregister;
@@ -438,6 +443,7 @@ static int __init generic_NCR5380_detect
switch (overrides[current_override].board) {
case BOARD_NCR53C400:
+ case BOARD_DTC3181E:
case BOARD_NCR53C400A:
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
}
@@ -565,7 +571,11 @@ static inline int NCR5380_pread(struct S
; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- insb(instance->io_port + hostdata->c400_host_buf,
+ if (hostdata->io_width == 2)
+ insw(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 64);
+ else
+ insb(instance->io_port + hostdata->c400_host_buf,
dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
@@ -581,7 +591,11 @@ static inline int NCR5380_pread(struct S
; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- insb(instance->io_port + hostdata->c400_host_buf,
+ if (hostdata->io_width == 2)
+ insw(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 64);
+ else
+ insb(instance->io_port + hostdata->c400_host_buf,
dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
@@ -639,7 +653,11 @@ static inline int NCR5380_pwrite(struct
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
#ifndef SCSI_G_NCR5380_MEM
- outsb(instance->io_port + hostdata->c400_host_buf,
+ if (hostdata->io_width == 2)
+ outsw(instance->io_port + hostdata->c400_host_buf,
+ src + start, 64);
+ else
+ outsb(instance->io_port + hostdata->c400_host_buf,
src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
@@ -654,7 +672,11 @@ static inline int NCR5380_pwrite(struct
; // FIXME - no timeout
#ifndef SCSI_G_NCR5380_MEM
- outsb(instance->io_port + hostdata->c400_host_buf,
+ if (hostdata->io_width == 2)
+ outsw(instance->io_port + hostdata->c400_host_buf,
+ src + start, 64);
+ else
+ outsb(instance->io_port + hostdata->c400_host_buf,
src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
@@ -675,8 +697,10 @@ static inline int NCR5380_pwrite(struct
/* All documentation says to check for this. Maybe my hardware is too
* fast. Waiting for it seems to work fine! KLL
*/
- while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
- ; // FIXME - no timeout
+ while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) {
+ udelay(4); /* DTC436 chip hangs without this */
+ /* FIXME - no timeout */
+ }
/*
* I know. i is certainly != 0 here but the loop is new. See previous
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:51.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:54.000000000 +1100
@@ -44,7 +44,8 @@
#define NCR5380_implementation_fields \
int c400_ctl_status; \
int c400_blk_cnt; \
- int c400_host_buf;
+ int c400_host_buf; \
+ int io_width;
#else
/* therefore SCSI_G_NCR5380_MEM */
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (75 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 76/78] ncr5380: Enable PDMA for DTC chips Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-03 5:06 ` [PATCH v4 78/78] ncr5380: Add support for HP C2502 Finn Thain
2016-01-07 2:53 ` [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Martin K. Petersen
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 77-71 --]
[-- Type: text/plain, Size: 2932 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
The check for 53C80 registers accessibility was commented out because
it was broken (inverted). Fix and enable it.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/g_NCR5380.c | 37 ++++++-------------------------------
1 file changed, 6 insertions(+), 31 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:54.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:55.000000000 +1100
@@ -609,14 +609,10 @@ static inline int NCR5380_pread(struct S
if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
-#if 0
- /*
- * DON'T DO THIS - THEY NEVER ARRIVE!
- */
- printk("53C400r: Waiting for 53C80 registers\n");
- while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
+ /* wait for 53C80 registers to be available */
+ while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
;
-#endif
+
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
printk(KERN_ERR "53C400r: no end dma signal\n");
@@ -638,7 +634,6 @@ static inline int NCR5380_pwrite(struct
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int blocks = len / 128;
int start = 0;
- int i;
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_write(hostdata->c400_blk_cnt, blocks);
@@ -687,36 +682,16 @@ static inline int NCR5380_pwrite(struct
blocks--;
}
-#if 0
- printk("53C400w: waiting for registers to be available\n");
- THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
- printk("53C400w: Got em\n");
-#endif
-
- /* Let's wait for this instead - could be ugly */
- /* All documentation says to check for this. Maybe my hardware is too
- * fast. Waiting for it seems to work fine! KLL
- */
- while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ)) {
+ /* wait for 53C80 registers to be available */
+ while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
udelay(4); /* DTC436 chip hangs without this */
/* FIXME - no timeout */
}
- /*
- * I know. i is certainly != 0 here but the loop is new. See previous
- * comment.
- */
- if (i) {
- if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
- printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
- } else
- printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
-
-#if 0
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
printk(KERN_ERR "53C400w: no end dma signal\n");
}
-#endif
+
while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
; // TIMEOUT
return 0;
^ permalink raw reply [flat|nested] 94+ messages in thread* [PATCH v4 78/78] ncr5380: Add support for HP C2502
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (76 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 77/78] ncr5380: Fix wait for 53C80 registers registers after PDMA Finn Thain
@ 2016-01-03 5:06 ` Finn Thain
2016-01-07 2:53 ` [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Martin K. Petersen
78 siblings, 0 replies; 94+ messages in thread
From: Finn Thain @ 2016-01-03 5:06 UTC (permalink / raw)
To: James E.J. Bottomley, Martin K. Petersen, Michael Schmitz,
linux-m68k, linux-scsi, linux-kernel
Cc: Ondrej Zary
[-- Attachment #1: 78-71 --]
[-- Type: text/plain, Size: 7183 bytes --]
From: Ondrej Zary <linux@rainbow-software.org>
HP C2502 cards (based on 53C400A chips) use different magic numbers for
software-based I/O address configuration than other cards.
The configuration is also extended to allow setting the IRQ.
Move the configuration to a new function magic_configure() and move
magic the magic numbers into an array. Add new magic numbers for these
HP cards and hp_c2502 module parameter to use them, e.g.:
modprobe g_NCR5380 ncr_irq=7 ncr_addr=0x280 hp_c2502=1
Tested with HP C2502 and DTCT-436P.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
Changes to Ondrej's versions:
- Omit a redundant comment.
- Throw an error if MMIO register locations are not known.
- Avoid 'if (...) { ... continue; } else { ... }'
- Fix "warning: 'port_idx' may be used uninitialized" and
"warning: 'magic' may be used uninitialized" for port-mapped config.
- Rebased.
---
drivers/scsi/g_NCR5380.c | 74 ++++++++++++++++++++++++++++++++++++-----------
drivers/scsi/g_NCR5380.h | 1
2 files changed, 59 insertions(+), 16 deletions(-)
Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:55.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.c 2016-01-03 16:04:56.000000000 +1100
@@ -80,6 +80,7 @@ static int ncr_5380;
static int ncr_53c400;
static int ncr_53c400a;
static int dtc_3181e;
+static int hp_c2502;
static struct override {
NCR5380_map_type NCR5380_map_name;
@@ -225,6 +226,30 @@ static int __init do_DTC3181E_setup(char
#endif
+#ifndef SCSI_G_NCR5380_MEM
+/*
+ * Configure I/O address of 53C400A or DTC436 by writing magic numbers
+ * to ports 0x779 and 0x379.
+ */
+static void magic_configure(int idx, u8 irq, u8 magic[])
+{
+ u8 cfg = 0;
+
+ outb(magic[0], 0x779);
+ outb(magic[1], 0x379);
+ outb(magic[2], 0x379);
+ outb(magic[3], 0x379);
+ outb(magic[4], 0x379);
+
+ /* allowed IRQs for HP C2502 */
+ if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
+ irq = 0;
+ if (idx >= 0 && idx <= 7)
+ cfg = 0x80 | idx | (irq << 4);
+ outb(cfg, 0x379);
+}
+#endif
+
/**
* generic_NCR5380_detect - look for NCR5380 controllers
* @tpnt: the scsi template
@@ -241,8 +266,10 @@ static int __init generic_NCR5380_detect
static int current_override;
int count;
unsigned int *ports;
+ u8 *magic = NULL;
#ifndef SCSI_G_NCR5380_MEM
int i;
+ int port_idx = -1;
unsigned long region_size = 16;
#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
@@ -251,6 +278,12 @@ static int __init generic_NCR5380_detect
static unsigned int __initdata dtc_3181e_ports[] = {
0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
};
+ static u8 ncr_53c400a_magic[] __initdata = { /* 53C400A & DTC436 */
+ 0x59, 0xb9, 0xc5, 0xae, 0xa6
+ };
+ static u8 hp_c2502_magic[] __initdata = { /* HP C2502 */
+ 0x0f, 0x22, 0xf0, 0x20, 0x80
+ };
int flags;
struct Scsi_Host *instance;
struct NCR5380_hostdata *hostdata;
@@ -273,6 +306,8 @@ static int __init generic_NCR5380_detect
overrides[0].board = BOARD_NCR53C400A;
else if (dtc_3181e)
overrides[0].board = BOARD_DTC3181E;
+ else if (hp_c2502)
+ overrides[0].board = BOARD_HP_C2502;
#ifndef SCSI_G_NCR5380_MEM
if (!current_override && isapnp_present()) {
struct pnp_dev *dev = NULL;
@@ -325,24 +360,26 @@ static int __init generic_NCR5380_detect
case BOARD_NCR53C400A:
flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
+ magic = ncr_53c400a_magic;
+ break;
+ case BOARD_HP_C2502:
+ flags = FLAG_NO_DMA_FIXUP;
+ ports = ncr_53c400a_ports;
+ magic = hp_c2502_magic;
break;
case BOARD_DTC3181E:
flags = FLAG_NO_DMA_FIXUP;
ports = dtc_3181e_ports;
+ magic = ncr_53c400a_magic;
break;
}
#ifndef SCSI_G_NCR5380_MEM
- if (ports) {
+ if (ports && magic) {
/* wakeup sequence for the NCR53C400A and DTC3181E */
/* Disable the adapter and look for a free io port */
- outb(0x59, 0x779);
- outb(0xb9, 0x379);
- outb(0xc5, 0x379);
- outb(0xae, 0x379);
- outb(0xa6, 0x379);
- outb(0x00, 0x379);
+ magic_configure(-1, 0, magic);
if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
for (i = 0; ports[i]; i++) {
@@ -361,17 +398,12 @@ static int __init generic_NCR5380_detect
}
if (ports[i]) {
/* At this point we have our region reserved */
- outb(0x59, 0x779);
- outb(0xb9, 0x379);
- outb(0xc5, 0x379);
- outb(0xae, 0x379);
- outb(0xa6, 0x379);
- outb(0x80 | i, 0x379); /* set io port to be used */
+ magic_configure(i, 0, magic); /* no IRQ yet */
outb(0xc0, ports[i] + 9);
if (inb(ports[i] + 9) != 0x80)
continue;
- else
- overrides[current_override].NCR5380_map_name = ports[i];
+ overrides[current_override].NCR5380_map_name = ports[i];
+ port_idx = i;
} else
continue;
}
@@ -417,6 +449,7 @@ static int __init generic_NCR5380_detect
hostdata->io_width = 2; /* 16-bit PDMA */
/* fall through */
case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
hostdata->c400_ctl_status = 9;
hostdata->c400_blk_cnt = 10;
hostdata->c400_host_buf = 8;
@@ -433,6 +466,7 @@ static int __init generic_NCR5380_detect
break;
case BOARD_DTC3181E:
case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
goto out_unregister;
}
@@ -445,6 +479,7 @@ static int __init generic_NCR5380_detect
case BOARD_NCR53C400:
case BOARD_DTC3181E:
case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
}
@@ -459,12 +494,18 @@ static int __init generic_NCR5380_detect
if (instance->irq == 255)
instance->irq = NO_IRQ;
- if (instance->irq != NO_IRQ)
+ if (instance->irq != NO_IRQ) {
+#ifndef SCSI_G_NCR5380_MEM
+ /* set IRQ for HP C2502 */
+ if (overrides[current_override].board == BOARD_HP_C2502)
+ magic_configure(port_idx, instance->irq, magic);
+#endif
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
}
+ }
if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
@@ -751,6 +792,7 @@ module_param(ncr_5380, int, 0);
module_param(ncr_53c400, int, 0);
module_param(ncr_53c400a, int, 0);
module_param(dtc_3181e, int, 0);
+module_param(hp_c2502, int, 0);
MODULE_LICENSE("GPL");
#if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)
Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
--- linux.orig/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:54.000000000 +1100
+++ linux/drivers/scsi/g_NCR5380.h 2016-01-03 16:04:56.000000000 +1100
@@ -88,6 +88,7 @@
#define BOARD_NCR53C400 1
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
+#define BOARD_HP_C2502 4
#endif /* GENERIC_NCR5380_H */
^ permalink raw reply [flat|nested] 94+ messages in thread* Re: [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers
2016-01-03 5:05 [PATCH v4 00/78] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
` (77 preceding siblings ...)
2016-01-03 5:06 ` [PATCH v4 78/78] ncr5380: Add support for HP C2502 Finn Thain
@ 2016-01-07 2:53 ` Martin K. Petersen
78 siblings, 0 replies; 94+ messages in thread
From: Martin K. Petersen @ 2016-01-07 2:53 UTC (permalink / raw)
To: Finn Thain
Cc: Martin K. Petersen, Michael Schmitz, linux-m68k, linux-scsi,
linux-kernel
>>>>> "Finn" == Finn Thain <fthain@telegraphics.com.au> writes:
Finn> Like my previous work on the NCR5380 drivers, this patch series
Finn> has bug fixes, code cleanup and modernization. These drivers
Finn> suffer from mistakes, poor style and neglect and this long series
Finn> addresses the worst of it, covering all ten wrapper drivers and
Finn> both of the core driver forks. The combined size of the drivers is
Finn> reduced by over 700 LoC.
I have staged this for inclusion in a separate branch. Will pull it into
the main queue unless kbuild complains.
http://git.kernel.org/cgit/linux/kernel/git/mkp/scsi.git/log/?h=4.5/ncr5380
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 94+ messages in thread