[PATCHv6 0/7] Convert exiting EEPROM drivers to NVMEM

[PATCHv6 0/7] Convert exiting EEPROM drivers to NVMEM

[Andrew Lunn]

This patch set converts the old EEPROM drivers in driver/misc/eeprom to
use the NVMEM framework. These drivers export there content in /sys as
read only to root, since the EEPROM may contain sensitive information.
So the first patch adds a flag so the NVMEM framework will create its
file in /sys as root read only.

To keep backwards compatibility with these older drivers, the contents
of the EEPROM must be exports in sysfs in a file called eeprom in the
devices node in sys, where as the NVMEM places them under class/nvmem.
So add this optional backwards compatible to the framework, again
using a flag.

Then convert the at24, at25 and 93xx46 by adding regmap support,
removing each drivers own /sys code and registering with the NVMEM
framework.

AT24 and 93xx46 has been boot tested, at25 compile tested only.

v2:

nvmem_register() now supports a backwards compatible flag, and the
Kconfig option has been removed.

v3:

Rebase on v4.5-rc1.
Add a patch to replace memory_accessor in the setup() callbacks with
nvmem API calls

v4:

Rebase on v4.5-rc3
Fix lockdep key in patch #2

v5:
Remove useless test
Added Acked-bys.

v6:
Fix typ0 and stray newline
Add tested-by:

Andrew Lunn (7):
  nvmem: Add flag to export NVMEM to root only
  nvmem: Add backwards compatibility support for older EEPROM drivers.
  eeprom: at24: extend driver to plug into the NVMEM framework
  eeprom: at25: Remove in kernel API for accessing the EEPROM
  eeprom: at25: extend driver to plug into the NVMEM framework
  eeprom: 93xx46: extend driver to plug into the NVMEM framework
  misc: at24: replace memory_accessor with nvmem_device_read

 arch/arm/mach-davinci/board-mityomapl138.c |   5 +-
 arch/arm/mach-davinci/common.c             |   4 +-
 drivers/misc/eeprom/Kconfig                |   6 ++
 drivers/misc/eeprom/at24.c                 | 130 +++++++++++++------------
 drivers/misc/eeprom/at25.c                 | 148 +++++++++++++----------------
 drivers/misc/eeprom/eeprom_93xx46.c        | 120 +++++++++++++++++------
 drivers/nvmem/core.c                       | 141 +++++++++++++++++++++++++--
 include/linux/davinci_emac.h               |   4 +-
 include/linux/memory.h                     |  11 ---
 include/linux/nvmem-provider.h             |   5 +-
 include/linux/platform_data/at24.h         |  10 +-
 include/linux/spi/eeprom.h                 |   2 -
 12 files changed, 384 insertions(+), 202 deletions(-)

-- 
2.7.0

[PATCHv6 1/7] nvmem: Add flag to export NVMEM to root only

[Andrew Lunn]

Legacy AT24, AT25 EEPROMs are exported in sys so that only root can
read the contents. The EEPROMs may contain sensitive information. Add
a flag so the provide can indicate that NVMEM should also restrict
access to root only.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/nvmem/core.c           | 57 ++++++++++++++++++++++++++++++++++++++++--
 include/linux/nvmem-provider.h |  1 +
 2 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 6fd4e5a5ef4a..4ccf03da6467 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -155,6 +155,53 @@ static const struct attribute_group *nvmem_ro_dev_groups[] = {
 	NULL,
 };
 
+/* default read/write permissions, root only */
+static struct bin_attribute bin_attr_rw_root_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= S_IWUSR | S_IRUSR,
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+static struct bin_attribute *nvmem_bin_rw_root_attributes[] = {
+	&bin_attr_rw_root_nvmem,
+	NULL,
+};
+
+static const struct attribute_group nvmem_bin_rw_root_group = {
+	.bin_attrs	= nvmem_bin_rw_root_attributes,
+};
+
+static const struct attribute_group *nvmem_rw_root_dev_groups[] = {
+	&nvmem_bin_rw_root_group,
+	NULL,
+};
+
+/* read only permission, root only */
+static struct bin_attribute bin_attr_ro_root_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= S_IRUSR,
+	},
+	.read	= bin_attr_nvmem_read,
+};
+
+static struct bin_attribute *nvmem_bin_ro_root_attributes[] = {
+	&bin_attr_ro_root_nvmem,
+	NULL,
+};
+
+static const struct attribute_group nvmem_bin_ro_root_group = {
+	.bin_attrs	= nvmem_bin_ro_root_attributes,
+};
+
+static const struct attribute_group *nvmem_ro_root_dev_groups[] = {
+	&nvmem_bin_ro_root_group,
+	NULL,
+};
+
 static void nvmem_release(struct device *dev)
 {
 	struct nvmem_device *nvmem = to_nvmem_device(dev);
@@ -347,8 +394,14 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	nvmem->read_only = of_property_read_bool(np, "read-only") |
 			   config->read_only;
 
-	nvmem->dev.groups = nvmem->read_only ? nvmem_ro_dev_groups :
-					       nvmem_rw_dev_groups;
+	if (config->root_only)
+		nvmem->dev.groups = nvmem->read_only ?
+			nvmem_ro_root_dev_groups :
+			nvmem_rw_root_dev_groups;
+	else
+		nvmem->dev.groups = nvmem->read_only ?
+			nvmem_ro_dev_groups :
+			nvmem_rw_dev_groups;
 
 	device_initialize(&nvmem->dev);
 
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 0b68caff1b3c..d24fefa0c11d 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -23,6 +23,7 @@ struct nvmem_config {
 	const struct nvmem_cell_info	*cells;
 	int			ncells;
 	bool			read_only;
+	bool			root_only;
 };
 
 #if IS_ENABLED(CONFIG_NVMEM)
-- 
2.7.0

[PATCHv6 2/7] nvmem: Add backwards compatibility support for older EEPROM drivers.

[Andrew Lunn]

Older drivers made an 'eeprom' file available in the /sys device
directory. Have the NVMEM core provide this to retain backwards
compatibility.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v4: Add lockdep support
---
 drivers/nvmem/core.c           | 84 ++++++++++++++++++++++++++++++++++++++----
 include/linux/nvmem-provider.h |  4 +-
 2 files changed, 79 insertions(+), 9 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 4ccf03da6467..9ad1c2cf75ac 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -38,8 +38,13 @@ struct nvmem_device {
 	int			users;
 	size_t			size;
 	bool			read_only;
+	int			flags;
+	struct bin_attribute	eeprom;
+	struct device		*base_dev;
 };
 
+#define FLAG_COMPAT		BIT(0)
+
 struct nvmem_cell {
 	const char		*name;
 	int			offset;
@@ -56,16 +61,26 @@ static DEFINE_IDA(nvmem_ida);
 static LIST_HEAD(nvmem_cells);
 static DEFINE_MUTEX(nvmem_cells_mutex);
 
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key eeprom_lock_key;
+#endif
+
 #define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
 
 static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
 				    struct bin_attribute *attr,
 				    char *buf, loff_t pos, size_t count)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct nvmem_device *nvmem = to_nvmem_device(dev);
+	struct device *dev;
+	struct nvmem_device *nvmem;
 	int rc;
 
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = container_of(kobj, struct device, kobj);
+	nvmem = to_nvmem_device(dev);
+
 	/* Stop the user from reading */
 	if (pos >= nvmem->size)
 		return 0;
@@ -87,10 +102,16 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
 				     struct bin_attribute *attr,
 				     char *buf, loff_t pos, size_t count)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct nvmem_device *nvmem = to_nvmem_device(dev);
+	struct device *dev;
+	struct nvmem_device *nvmem;
 	int rc;
 
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = container_of(kobj, struct device, kobj);
+	nvmem = to_nvmem_device(dev);
+
 	/* Stop the user from writing */
 	if (pos >= nvmem->size)
 		return 0;
@@ -341,6 +362,43 @@ err:
 	return rval;
 }
 
+/*
+ * nvmem_setup_compat() - Create an additional binary entry in
+ * drivers sys directory, to be backwards compatible with the older
+ * drivers/misc/eeprom drivers.
+ */
+static int nvmem_setup_compat(struct nvmem_device *nvmem,
+			      const struct nvmem_config *config)
+{
+	int rval;
+
+	if (!config->base_dev)
+		return -EINVAL;
+
+	if (nvmem->read_only)
+		nvmem->eeprom = bin_attr_ro_root_nvmem;
+	else
+		nvmem->eeprom = bin_attr_rw_root_nvmem;
+	nvmem->eeprom.attr.name = "eeprom";
+	nvmem->eeprom.size = nvmem->size;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	nvmem->eeprom.attr.key = &eeprom_lock_key;
+#endif
+	nvmem->eeprom.private = &nvmem->dev;
+	nvmem->base_dev = config->base_dev;
+
+	rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
+	if (rval) {
+		dev_err(&nvmem->dev,
+			"Failed to create eeprom binary file %d\n", rval);
+		return rval;
+	}
+
+	nvmem->flags |= FLAG_COMPAT;
+
+	return 0;
+}
+
 /**
  * nvmem_register() - Register a nvmem device for given nvmem_config.
  * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
@@ -408,16 +466,23 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
 
 	rval = device_add(&nvmem->dev);
-	if (rval) {
-		ida_simple_remove(&nvmem_ida, nvmem->id);
-		kfree(nvmem);
-		return ERR_PTR(rval);
+	if (rval)
+		goto out;
+
+	if (config->compat) {
+		rval = nvmem_setup_compat(nvmem, config);
+		if (rval)
+			goto out;
 	}
 
 	if (config->cells)
 		nvmem_add_cells(nvmem, config);
 
 	return nvmem;
+out:
+	ida_simple_remove(&nvmem_ida, nvmem->id);
+	kfree(nvmem);
+	return ERR_PTR(rval);
 }
 EXPORT_SYMBOL_GPL(nvmem_register);
 
@@ -437,6 +502,9 @@ int nvmem_unregister(struct nvmem_device *nvmem)
 	}
 	mutex_unlock(&nvmem_mutex);
 
+	if (nvmem->flags & FLAG_COMPAT)
+		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
+
 	nvmem_device_remove_all_cells(nvmem);
 	device_del(&nvmem->dev);
 
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index d24fefa0c11d..a4fcc90b0f20 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -24,6 +24,9 @@ struct nvmem_config {
 	int			ncells;
 	bool			read_only;
 	bool			root_only;
+	/* To be only used by old driver/misc/eeprom drivers */
+	bool			compat;
+	struct device		*base_dev;
 };
 
 #if IS_ENABLED(CONFIG_NVMEM)
@@ -44,5 +47,4 @@ static inline int nvmem_unregister(struct nvmem_device *nvmem)
 }
 
 #endif /* CONFIG_NVMEM */
-
 #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
-- 
2.7.0

[PATCHv6 3/7] eeprom: at24: extend driver to plug into the NVMEM framework

[Andrew Lunn]

Add a regmap for accessing the EEPROM, and then use that with the
NVMEM framework. Set the NVMEM config structure to enable backward, so
that the 'eeprom' file in sys is provided by the framework.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/misc/eeprom/Kconfig |   2 +
 drivers/misc/eeprom/at24.c  | 121 +++++++++++++++++++++++++++++---------------
 2 files changed, 82 insertions(+), 41 deletions(-)

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 04f2e1fa9dd1..24935473393b 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -3,6 +3,8 @@ menu "EEPROM support"
 config EEPROM_AT24
 	tristate "I2C EEPROMs / RAMs / ROMs from most vendors"
 	depends on I2C && SYSFS
+	select REGMAP
+	select NVMEM
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs
 	  and compatible devices like FRAMs, SRAMs, ROMs etc. After you
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 5d7c0900fa1b..f15cda93fc4c 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
-#include <linux/sysfs.h>
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
 #include <linux/bitops.h>
@@ -23,6 +22,8 @@
 #include <linux/of.h>
 #include <linux/acpi.h>
 #include <linux/i2c.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
 #include <linux/platform_data/at24.h>
 
 /*
@@ -64,12 +65,15 @@ struct at24_data {
 	 * but not from changes by other I2C masters.
 	 */
 	struct mutex lock;
-	struct bin_attribute bin;
 
 	u8 *writebuf;
 	unsigned write_max;
 	unsigned num_addresses;
 
+	struct regmap_config regmap_config;
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
+
 	/*
 	 * Some chips tie up multiple I2C addresses; dummy devices reserve
 	 * them for us, and we'll use them with SMBus calls.
@@ -283,17 +287,6 @@ static ssize_t at24_read(struct at24_data *at24,
 	return retval;
 }
 
-static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj,
-		struct bin_attribute *attr,
-		char *buf, loff_t off, size_t count)
-{
-	struct at24_data *at24;
-
-	at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-	return at24_read(at24, buf, off, count);
-}
-
-
 /*
  * Note that if the hardware write-protect pin is pulled high, the whole
  * chip is normally write protected. But there are plenty of product
@@ -414,16 +407,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
 	return retval;
 }
 
-static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj,
-		struct bin_attribute *attr,
-		char *buf, loff_t off, size_t count)
-{
-	struct at24_data *at24;
-
-	at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-	return at24_write(at24, buf, off, count);
-}
-
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -450,6 +433,49 @@ static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
 
 /*-------------------------------------------------------------------------*/
 
+/*
+ * Provide a regmap interface, which is registered with the NVMEM
+ * framework
+*/
+static int at24_regmap_read(void *context, const void *reg, size_t reg_size,
+			    void *val, size_t val_size)
+{
+	struct at24_data *at24 = context;
+	off_t offset = *(u32 *)reg;
+	int err;
+
+	err = at24_read(at24, val, offset, val_size);
+	if (err)
+		return err;
+	return 0;
+}
+
+static int at24_regmap_write(void *context, const void *data, size_t count)
+{
+	struct at24_data *at24 = context;
+	const char *buf;
+	u32 offset;
+	size_t len;
+	int err;
+
+	memcpy(&offset, data, sizeof(offset));
+	buf = (const char *)data + sizeof(offset);
+	len = count - sizeof(offset);
+
+	err = at24_write(at24, buf, offset, len);
+	if (err)
+		return err;
+	return 0;
+}
+
+static const struct regmap_bus at24_regmap_bus = {
+	.read = at24_regmap_read,
+	.write = at24_regmap_write,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+/*-------------------------------------------------------------------------*/
+
 #ifdef CONFIG_OF
 static void at24_get_ofdata(struct i2c_client *client,
 		struct at24_platform_data *chip)
@@ -481,6 +507,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct at24_data *at24;
 	int err;
 	unsigned i, num_addresses;
+	struct regmap *regmap;
 
 	if (client->dev.platform_data) {
 		chip = *(struct at24_platform_data *)client->dev.platform_data;
@@ -573,16 +600,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	at24->chip = chip;
 	at24->num_addresses = num_addresses;
 
-	/*
-	 * Export the EEPROM bytes through sysfs, since that's convenient.
-	 * By default, only root should see the data (maybe passwords etc)
-	 */
-	sysfs_bin_attr_init(&at24->bin);
-	at24->bin.attr.name = "eeprom";
-	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
-	at24->bin.read = at24_bin_read;
-	at24->bin.size = chip.byte_len;
-
 	at24->macc.read = at24_macc_read;
 
 	writable = !(chip.flags & AT24_FLAG_READONLY);
@@ -593,9 +610,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 			at24->macc.write = at24_macc_write;
 
-			at24->bin.write = at24_bin_write;
-			at24->bin.attr.mode |= S_IWUSR;
-
 			if (write_max > io_limit)
 				write_max = io_limit;
 			if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
@@ -627,14 +641,38 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 	}
 
-	err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
-	if (err)
+	at24->regmap_config.reg_bits = 32;
+	at24->regmap_config.val_bits = 8;
+	at24->regmap_config.reg_stride = 1;
+	at24->regmap_config.max_register = chip.byte_len - 1;
+
+	regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24,
+				  &at24->regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap init failed\n");
+		err = PTR_ERR(regmap);
 		goto err_clients;
+	}
+
+	at24->nvmem_config.name = dev_name(&client->dev);
+	at24->nvmem_config.dev = &client->dev;
+	at24->nvmem_config.read_only = !writable;
+	at24->nvmem_config.root_only = true;
+	at24->nvmem_config.owner = THIS_MODULE;
+	at24->nvmem_config.compat = true;
+	at24->nvmem_config.base_dev = &client->dev;
+
+	at24->nvmem = nvmem_register(&at24->nvmem_config);
+
+	if (IS_ERR(at24->nvmem)) {
+		err = PTR_ERR(at24->nvmem);
+		goto err_clients;
+	}
 
 	i2c_set_clientdata(client, at24);
 
-	dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n",
-		at24->bin.size, client->name,
+	dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
+		chip.byte_len, client->name,
 		writable ? "writable" : "read-only", at24->write_max);
 	if (use_smbus == I2C_SMBUS_WORD_DATA ||
 	    use_smbus == I2C_SMBUS_BYTE_DATA) {
@@ -663,7 +701,8 @@ static int at24_remove(struct i2c_client *client)
 	int i;
 
 	at24 = i2c_get_clientdata(client);
-	sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
+
+	nvmem_unregister(at24->nvmem);
 
 	for (i = 1; i < at24->num_addresses; i++)
 		i2c_unregister_device(at24->client[i]);
-- 
2.7.0

[PATCHv6 4/7] eeprom: at25: Remove in kernel API for accessing the EEPROM

[Andrew Lunn]

The setup() callback is not used by any in kernel code. Remove it.
Any new code which requires access to the eeprom can use the NVMEM
API.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/misc/eeprom/at25.c | 26 --------------------------
 include/linux/spi/eeprom.h |  2 --
 2 files changed, 28 deletions(-)

diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index f850ef556bcc..4732f6997289 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -29,7 +29,6 @@
 
 struct at25_data {
 	struct spi_device	*spi;
-	struct memory_accessor	mem;
 	struct mutex		lock;
 	struct spi_eeprom	chip;
 	struct bin_attribute	bin;
@@ -281,26 +280,6 @@ at25_bin_write(struct file *filp, struct kobject *kobj,
 
 /*-------------------------------------------------------------------------*/
 
-/* Let in-kernel code access the eeprom data. */
-
-static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf,
-			 off_t offset, size_t count)
-{
-	struct at25_data *at25 = container_of(mem, struct at25_data, mem);
-
-	return at25_ee_read(at25, buf, offset, count);
-}
-
-static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
-			  off_t offset, size_t count)
-{
-	struct at25_data *at25 = container_of(mem, struct at25_data, mem);
-
-	return at25_ee_write(at25, buf, offset, count);
-}
-
-/*-------------------------------------------------------------------------*/
-
 static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
 {
 	u32 val;
@@ -415,22 +394,17 @@ static int at25_probe(struct spi_device *spi)
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
-	at25->mem.read = at25_mem_read;
 
 	at25->bin.size = at25->chip.byte_len;
 	if (!(chip.flags & EE_READONLY)) {
 		at25->bin.write = at25_bin_write;
 		at25->bin.attr.mode |= S_IWUSR;
-		at25->mem.write = at25_mem_write;
 	}
 
 	err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
 	if (err)
 		return err;
 
-	if (chip.setup)
-		chip.setup(&at25->mem, chip.context);
-
 	dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
 		(at25->bin.size < 1024)
 			? at25->bin.size
diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
index 403e007aef68..e34e169f9dcb 100644
--- a/include/linux/spi/eeprom.h
+++ b/include/linux/spi/eeprom.h
@@ -30,8 +30,6 @@ struct spi_eeprom {
 	 */
 #define EE_INSTR_BIT3_IS_ADDR	0x0010
 
-	/* for exporting this chip's data to other kernel code */
-	void (*setup)(struct memory_accessor *mem, void *context);
 	void *context;
 };
 
-- 
2.7.0

[PATCHv6 5/7] eeprom: at25: extend driver to plug into the NVMEM framework

[Andrew Lunn]

Add a regmap for accessing the EEPROM, and then use that with the
NVMEM framework. Enable backwards compatibility in the NVMEM config,
so that the 'eeprom' file in sys is provided by the framework.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/misc/eeprom/Kconfig |   2 +
 drivers/misc/eeprom/at25.c  | 124 ++++++++++++++++++++++++--------------------
 2 files changed, 71 insertions(+), 55 deletions(-)

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 24935473393b..8c43a222ae55 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -32,6 +32,8 @@ config EEPROM_AT24
 config EEPROM_AT25
 	tristate "SPI EEPROMs from most vendors"
 	depends on SPI && SYSFS
+	select REGMAP
+	select NVMEM
 	help
 	  Enable this driver to get read/write support to most SPI EEPROMs,
 	  after you configure the board init code to know about each eeprom
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 4732f6997289..fa36a6e37084 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -16,6 +16,8 @@
 #include <linux/device.h>
 #include <linux/sched.h>
 
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/property.h>
@@ -31,8 +33,10 @@ struct at25_data {
 	struct spi_device	*spi;
 	struct mutex		lock;
 	struct spi_eeprom	chip;
-	struct bin_attribute	bin;
 	unsigned		addrlen;
+	struct regmap_config	regmap_config;
+	struct nvmem_config	nvmem_config;
+	struct nvmem_device	*nvmem;
 };
 
 #define	AT25_WREN	0x06		/* latch the write enable */
@@ -76,10 +80,10 @@ at25_ee_read(
 	struct spi_message	m;
 	u8			instr;
 
-	if (unlikely(offset >= at25->bin.size))
+	if (unlikely(offset >= at25->chip.byte_len))
 		return 0;
-	if ((offset + count) > at25->bin.size)
-		count = at25->bin.size - offset;
+	if ((offset + count) > at25->chip.byte_len)
+		count = at25->chip.byte_len - offset;
 	if (unlikely(!count))
 		return count;
 
@@ -130,21 +134,19 @@ at25_ee_read(
 	return status ? status : count;
 }
 
-static ssize_t
-at25_bin_read(struct file *filp, struct kobject *kobj,
-	      struct bin_attribute *bin_attr,
-	      char *buf, loff_t off, size_t count)
+static int at25_regmap_read(void *context, const void *reg, size_t reg_size,
+			    void *val, size_t val_size)
 {
-	struct device		*dev;
-	struct at25_data	*at25;
-
-	dev = container_of(kobj, struct device, kobj);
-	at25 = dev_get_drvdata(dev);
+	struct at25_data *at25 = context;
+	off_t offset = *(u32 *)reg;
+	int err;
 
-	return at25_ee_read(at25, buf, off, count);
+	err = at25_ee_read(at25, val, offset, val_size);
+	if (err)
+		return err;
+	return 0;
 }
 
-
 static ssize_t
 at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 	      size_t count)
@@ -154,10 +156,10 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 	unsigned		buf_size;
 	u8			*bounce;
 
-	if (unlikely(off >= at25->bin.size))
+	if (unlikely(off >= at25->chip.byte_len))
 		return -EFBIG;
-	if ((off + count) > at25->bin.size)
-		count = at25->bin.size - off;
+	if ((off + count) > at25->chip.byte_len)
+		count = at25->chip.byte_len - off;
 	if (unlikely(!count))
 		return count;
 
@@ -264,20 +266,30 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 	return written ? written : status;
 }
 
-static ssize_t
-at25_bin_write(struct file *filp, struct kobject *kobj,
-	       struct bin_attribute *bin_attr,
-	       char *buf, loff_t off, size_t count)
+static int at25_regmap_write(void *context, const void *data, size_t count)
 {
-	struct device		*dev;
-	struct at25_data	*at25;
+	struct at25_data *at25 = context;
+	const char *buf;
+	u32 offset;
+	size_t len;
+	int err;
 
-	dev = container_of(kobj, struct device, kobj);
-	at25 = dev_get_drvdata(dev);
+	memcpy(&offset, data, sizeof(offset));
+	buf = (const char *)data + sizeof(offset);
+	len = count - sizeof(offset);
 
-	return at25_ee_write(at25, buf, off, count);
+	err = at25_ee_write(at25, buf, offset, len);
+	if (err)
+		return err;
+	return 0;
 }
 
+static const struct regmap_bus at25_regmap_bus = {
+	.read = at25_regmap_read,
+	.write = at25_regmap_write,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
 /*-------------------------------------------------------------------------*/
 
 static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
@@ -337,6 +349,7 @@ static int at25_probe(struct spi_device *spi)
 {
 	struct at25_data	*at25 = NULL;
 	struct spi_eeprom	chip;
+	struct regmap		*regmap;
 	int			err;
 	int			sr;
 	int			addrlen;
@@ -381,35 +394,35 @@ static int at25_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, at25);
 	at25->addrlen = addrlen;
 
-	/* Export the EEPROM bytes through sysfs, since that's convenient.
-	 * And maybe to other kernel code; it might hold a board's Ethernet
-	 * address, or board-specific calibration data generated on the
-	 * manufacturing floor.
-	 *
-	 * Default to root-only access to the data; EEPROMs often hold data
-	 * that's sensitive for read and/or write, like ethernet addresses,
-	 * security codes, board-specific manufacturing calibrations, etc.
-	 */
-	sysfs_bin_attr_init(&at25->bin);
-	at25->bin.attr.name = "eeprom";
-	at25->bin.attr.mode = S_IRUSR;
-	at25->bin.read = at25_bin_read;
-
-	at25->bin.size = at25->chip.byte_len;
-	if (!(chip.flags & EE_READONLY)) {
-		at25->bin.write = at25_bin_write;
-		at25->bin.attr.mode |= S_IWUSR;
-	}
+	at25->regmap_config.reg_bits = 32;
+	at25->regmap_config.val_bits = 8;
+	at25->regmap_config.reg_stride = 1;
+	at25->regmap_config.max_register = chip.byte_len - 1;
 
-	err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
-	if (err)
-		return err;
+	regmap = devm_regmap_init(&spi->dev, &at25_regmap_bus, at25,
+				  &at25->regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
 
-	dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
-		(at25->bin.size < 1024)
-			? at25->bin.size
-			: (at25->bin.size / 1024),
-		(at25->bin.size < 1024) ? "Byte" : "KByte",
+	at25->nvmem_config.name = dev_name(&spi->dev);
+	at25->nvmem_config.dev = &spi->dev;
+	at25->nvmem_config.read_only = chip.flags & EE_READONLY;
+	at25->nvmem_config.root_only = true;
+	at25->nvmem_config.owner = THIS_MODULE;
+	at25->nvmem_config.compat = true;
+	at25->nvmem_config.base_dev = &spi->dev;
+
+	at25->nvmem = nvmem_register(&at25->nvmem_config);
+	if (IS_ERR(at25->nvmem))
+		return PTR_ERR(at25->nvmem);
+
+	dev_info(&spi->dev, "%d %s %s eeprom%s, pagesize %u\n",
+		(chip.byte_len < 1024)
+			? chip.byte_len
+			: (chip.byte_len / 1024),
+		(chip.byte_len < 1024) ? "Byte" : "KByte",
 		at25->chip.name,
 		(chip.flags & EE_READONLY) ? " (readonly)" : "",
 		at25->chip.page_size);
@@ -421,7 +434,8 @@ static int at25_remove(struct spi_device *spi)
 	struct at25_data	*at25;
 
 	at25 = spi_get_drvdata(spi);
-	sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
+	nvmem_unregister(at25->nvmem);
+
 	return 0;
 }
 
-- 
2.7.0

[PATCHv6 6/7] eeprom: 93xx46: extend driver to plug into the NVMEM framework

[Andrew Lunn]

Add a regmap for accessing the EEPROM, and then use that with the
NVMEM framework. Enable backward compatibility in the NVMEM config
structure, so that the 'eeprom' file in sys is provided by the
framework.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
v5: Remove useless test.
v6: Fix typ0 and removed stray newline.
---
 drivers/misc/eeprom/Kconfig         |   2 +
 drivers/misc/eeprom/eeprom_93xx46.c | 120 ++++++++++++++++++++++++++++--------
 2 files changed, 95 insertions(+), 27 deletions(-)

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 8c43a222ae55..cfc493c2e30a 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -78,6 +78,8 @@ config EEPROM_93CX6
 config EEPROM_93XX46
 	tristate "Microwire EEPROM 93XX46 support"
 	depends on SPI && SYSFS
+	select REGMAP
+	select NVMEM
 	help
 	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
 	  supports both read and write commands and also the command to
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index ff63f05edc76..f5de326d0d48 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -15,7 +15,8 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
-#include <linux/sysfs.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
 #include <linux/eeprom_93xx46.h>
 
 #define OP_START	0x4
@@ -28,25 +29,29 @@
 struct eeprom_93xx46_dev {
 	struct spi_device *spi;
 	struct eeprom_93xx46_platform_data *pdata;
-	struct bin_attribute bin;
 	struct mutex lock;
+	struct regmap_config regmap_config;
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
 	int addrlen;
+	int size;
 };
 
 static ssize_t
-eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
-		       struct bin_attribute *bin_attr,
-		       char *buf, loff_t off, size_t count)
+eeprom_93xx46_read(struct eeprom_93xx46_dev *edev, char *buf,
+		   unsigned off, size_t count)
 {
-	struct eeprom_93xx46_dev *edev;
-	struct device *dev;
 	struct spi_message m;
 	struct spi_transfer t[2];
 	int bits, ret;
 	u16 cmd_addr;
 
-	dev = container_of(kobj, struct device, kobj);
-	edev = dev_get_drvdata(dev);
+	if (unlikely(off >= edev->size))
+		return 0;
+	if ((off + count) > edev->size)
+		count = edev->size - off;
+	if (unlikely(!count))
+		return count;
 
 	cmd_addr = OP_READ << edev->addrlen;
 
@@ -182,16 +187,17 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
 }
 
 static ssize_t
-eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
-			struct bin_attribute *bin_attr,
-			char *buf, loff_t off, size_t count)
+eeprom_93xx46_write(struct eeprom_93xx46_dev *edev, const char *buf,
+		    loff_t off, size_t count)
 {
-	struct eeprom_93xx46_dev *edev;
-	struct device *dev;
 	int i, ret, step = 1;
 
-	dev = container_of(kobj, struct device, kobj);
-	edev = dev_get_drvdata(dev);
+	if (unlikely(off >= edev->size))
+		return -EFBIG;
+	if ((off + count) > edev->size)
+		count = edev->size - off;
+	if (unlikely(!count))
+		return count;
 
 	/* only write even number of bytes on 16-bit devices */
 	if (edev->addrlen == 6) {
@@ -228,6 +234,49 @@ eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
 	return ret ? : count;
 }
 
+/*
+ * Provide a regmap interface, which is registered with the NVMEM
+ * framework
+*/
+static int eeprom_93xx46_regmap_read(void *context, const void *reg,
+				     size_t reg_size, void *val,
+				     size_t val_size)
+{
+	struct eeprom_93xx46_dev *eeprom_93xx46 = context;
+	off_t offset = *(u32 *)reg;
+	int err;
+
+	err = eeprom_93xx46_read(eeprom_93xx46, val, offset, val_size);
+	if (err)
+		return err;
+	return 0;
+}
+
+static int eeprom_93xx46_regmap_write(void *context, const void *data,
+				      size_t count)
+{
+	struct eeprom_93xx46_dev *eeprom_93xx46 = context;
+	const char *buf;
+	u32 offset;
+	size_t len;
+	int err;
+
+	memcpy(&offset, data, sizeof(offset));
+	buf = (const char *)data + sizeof(offset);
+	len = count - sizeof(offset);
+
+	err = eeprom_93xx46_write(eeprom_93xx46, buf, offset, len);
+	if (err)
+		return err;
+	return 0;
+}
+
+static const struct regmap_bus eeprom_93xx46_regmap_bus = {
+	.read = eeprom_93xx46_regmap_read,
+	.write = eeprom_93xx46_regmap_write,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
 static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
 {
 	struct eeprom_93xx46_platform_data *pd = edev->pdata;
@@ -298,6 +347,7 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
 {
 	struct eeprom_93xx46_platform_data *pd;
 	struct eeprom_93xx46_dev *edev;
+	struct regmap *regmap;
 	int err;
 
 	pd = spi->dev.platform_data;
@@ -325,19 +375,34 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
 	edev->spi = spi_dev_get(spi);
 	edev->pdata = pd;
 
-	sysfs_bin_attr_init(&edev->bin);
-	edev->bin.attr.name = "eeprom";
-	edev->bin.attr.mode = S_IRUSR;
-	edev->bin.read = eeprom_93xx46_bin_read;
-	edev->bin.size = 128;
-	if (!(pd->flags & EE_READONLY)) {
-		edev->bin.write = eeprom_93xx46_bin_write;
-		edev->bin.attr.mode |= S_IWUSR;
+	edev->size = 128;
+
+	edev->regmap_config.reg_bits = 32;
+	edev->regmap_config.val_bits = 8;
+	edev->regmap_config.reg_stride = 1;
+	edev->regmap_config.max_register = edev->size - 1;
+
+	regmap = devm_regmap_init(&spi->dev, &eeprom_93xx46_regmap_bus, edev,
+				  &edev->regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "regmap init failed\n");
+		err = PTR_ERR(regmap);
+		goto fail;
 	}
 
-	err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin);
-	if (err)
+	edev->nvmem_config.name = dev_name(&spi->dev);
+	edev->nvmem_config.dev = &spi->dev;
+	edev->nvmem_config.read_only = pd->flags & EE_READONLY;
+	edev->nvmem_config.root_only = true;
+	edev->nvmem_config.owner = THIS_MODULE;
+	edev->nvmem_config.compat = true;
+	edev->nvmem_config.base_dev = &spi->dev;
+
+	edev->nvmem = nvmem_register(&edev->nvmem_config);
+	if (IS_ERR(edev->nvmem)) {
+		err = PTR_ERR(edev->nvmem);
 		goto fail;
+	}
 
 	dev_info(&spi->dev, "%d-bit eeprom %s\n",
 		(pd->flags & EE_ADDR8) ? 8 : 16,
@@ -359,10 +424,11 @@ static int eeprom_93xx46_remove(struct spi_device *spi)
 {
 	struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi);
 
+	nvmem_unregister(edev->nvmem);
+
 	if (!(edev->pdata->flags & EE_READONLY))
 		device_remove_file(&spi->dev, &dev_attr_erase);
 
-	sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
 	kfree(edev);
 	return 0;
 }
-- 
2.7.0

[PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Andrew Lunn]

Now that the AT24 uses the NVMEM framework, replace the
memory_accessor in the setup() callback with nvmem API calls.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/mach-davinci/board-mityomapl138.c |  5 +++--
 arch/arm/mach-davinci/common.c             |  4 ++--
 drivers/misc/eeprom/at24.c                 | 31 +-----------------------------
 include/linux/davinci_emac.h               |  4 ++--
 include/linux/memory.h                     | 11 -----------
 include/linux/platform_data/at24.h         | 10 +++++-----
 6 files changed, 13 insertions(+), 52 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index de1316bf643a..62ebac51bab9 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct memory_accessor *a, void *context)
+static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
+				&factory_config);
 	if (ret != sizeof(struct factory_config)) {
 		pr_warn("Read Factory Config Failed: %d\n", ret);
 		goto bad_config;
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index a794f6d9d444..f55ef2ef2f92 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 {
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
 	/* Read MAC addr from EEPROM */
-	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f15cda93fc4c..089d6943f68a 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -56,7 +56,6 @@
 
 struct at24_data {
 	struct at24_platform_data chip;
-	struct memory_accessor macc;
 	int use_smbus;
 	int use_smbus_write;
 
@@ -410,30 +409,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
 /*-------------------------------------------------------------------------*/
 
 /*
- * This lets other kernel code access the eeprom data. For example, it
- * might hold a board's Ethernet address, or board-specific calibration
- * data generated on the manufacturing floor.
- */
-
-static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
-			 off_t offset, size_t count)
-{
-	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
-	return at24_read(at24, buf, offset, count);
-}
-
-static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
-			  off_t offset, size_t count)
-{
-	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
-	return at24_write(at24, buf, offset, count);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
  * Provide a regmap interface, which is registered with the NVMEM
  * framework
 */
@@ -600,16 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	at24->chip = chip;
 	at24->num_addresses = num_addresses;
 
-	at24->macc.read = at24_macc_read;
-
 	writable = !(chip.flags & AT24_FLAG_READONLY);
 	if (writable) {
 		if (!use_smbus || use_smbus_write) {
 
 			unsigned write_max = chip.page_size;
 
-			at24->macc.write = at24_macc_write;
-
 			if (write_max > io_limit)
 				write_max = io_limit;
 			if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
@@ -683,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	/* export data to kernel code */
 	if (chip.setup)
-		chip.setup(&at24->macc, chip.context);
+		chip.setup(at24->nvmem, chip.context);
 
 	return 0;
 
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 542888504994..05b97144d342 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -12,7 +12,7 @@
 #define _LINUX_DAVINCI_EMAC_H
 
 #include <linux/if_ether.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>
 
 struct mdio_platform_data {
 	unsigned long		bus_freq;
@@ -46,5 +46,5 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 8b8d8d12348e..b723a686fc10 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -137,17 +137,6 @@ extern struct memory_block *find_memory_block(struct mem_section *);
 #endif
 
 /*
- * 'struct memory_accessor' is a generic interface to provide
- * in-kernel access to persistent memory such as i2c or SPI EEPROMs
- */
-struct memory_accessor {
-	ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
-			size_t count);
-	ssize_t (*write)(struct memory_accessor *, const char *buf,
-			 off_t offset, size_t count);
-};
-
-/*
  * Kernel text modification mutex, used for code patching. Users of this lock
  * can sleep.
  */
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
index c42aa89d34ee..dc9a13e5acda 100644
--- a/include/linux/platform_data/at24.h
+++ b/include/linux/platform_data/at24.h
@@ -9,7 +9,7 @@
 #define _LINUX_AT24_H
 
 #include <linux/types.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>
 
 /**
  * struct at24_platform_data - data to set up at24 (generic eeprom) driver
@@ -17,7 +17,7 @@
  * @page_size: number of byte which can be written in one go
  * @flags: tunable options, check AT24_FLAG_* defines
  * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via memory_accessor, see example
+	code to access eeprom via nvmem, see example
  * @context: optional parameter passed to setup()
  *
  * If you set up a custom eeprom type, please double-check the parameters.
@@ -26,13 +26,13 @@
  *
  * An example in pseudo code for a setup() callback:
  *
- * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * void get_mac_addr(struct mvmem_device *nvmem, void *context)
  * {
  *	u8 *mac_addr = ethernet_pdata->mac_addr;
  *	off_t offset = context;
  *
  *	// Read MAC addr from EEPROM
- *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
  *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
  * }
  *
@@ -48,7 +48,7 @@ struct at24_platform_data {
 #define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
 #define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
 
-	void		(*setup)(struct memory_accessor *, void *context);
+	void		(*setup)(struct nvmem_device *nvmem, void *context);
 	void		*context;
 };
 
-- 
2.7.0

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Srinivas Kandagatla]

+ adding davinci maintainers to the loop.

Hi Andrew,

Not sure which tree should take the patch, but we needs acks from the 
mach-davinci maitainers.

Other option is to defer this patch till other 6 patches are merged into 
mainline.

--srini

On 18/02/16 23:17, Andrew Lunn wrote:
> Now that the AT24 uses the NVMEM framework, replace the
> memory_accessor in the setup() callback with nvmem API calls.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>   arch/arm/mach-davinci/board-mityomapl138.c |  5 +++--
>   arch/arm/mach-davinci/common.c             |  4 ++--
>   drivers/misc/eeprom/at24.c                 | 31 +-----------------------------
>   include/linux/davinci_emac.h               |  4 ++--
>   include/linux/memory.h                     | 11 -----------
>   include/linux/platform_data/at24.h         | 10 +++++-----
>   6 files changed, 13 insertions(+), 52 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
> index de1316bf643a..62ebac51bab9 100644
> --- a/arch/arm/mach-davinci/board-mityomapl138.c
> +++ b/arch/arm/mach-davinci/board-mityomapl138.c
> @@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum)
>   static void mityomapl138_cpufreq_init(const char *partnum) { }
>   #endif
>
> -static void read_factory_config(struct memory_accessor *a, void *context)
> +static void read_factory_config(struct nvmem_device *nvmem, void *context)
>   {
>   	int ret;
>   	const char *partnum = NULL;
>   	struct davinci_soc_info *soc_info = &davinci_soc_info;
>
> -	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
> +	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
> +				&factory_config);
>   	if (ret != sizeof(struct factory_config)) {
>   		pr_warn("Read Factory Config Failed: %d\n", ret);
>   		goto bad_config;
> diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
> index a794f6d9d444..f55ef2ef2f92 100644
> --- a/arch/arm/mach-davinci/common.c
> +++ b/arch/arm/mach-davinci/common.c
> @@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info);
>   void __iomem *davinci_intc_base;
>   int davinci_intc_type;
>
> -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
> +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
>   {
>   	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
>   	off_t offset = (off_t)context;
>
>   	/* Read MAC addr from EEPROM */
> -	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
> +	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
>   		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
>   }
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index f15cda93fc4c..089d6943f68a 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -56,7 +56,6 @@
>
>   struct at24_data {
>   	struct at24_platform_data chip;
> -	struct memory_accessor macc;
>   	int use_smbus;
>   	int use_smbus_write;
>
> @@ -410,30 +409,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
>   /*-------------------------------------------------------------------------*/
>
>   /*
> - * This lets other kernel code access the eeprom data. For example, it
> - * might hold a board's Ethernet address, or board-specific calibration
> - * data generated on the manufacturing floor.
> - */
> -
> -static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
> -			 off_t offset, size_t count)
> -{
> -	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
> -
> -	return at24_read(at24, buf, offset, count);
> -}
> -
> -static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
> -			  off_t offset, size_t count)
> -{
> -	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
> -
> -	return at24_write(at24, buf, offset, count);
> -}
> -
> -/*-------------------------------------------------------------------------*/
> -
> -/*
>    * Provide a regmap interface, which is registered with the NVMEM
>    * framework
>   */
> @@ -600,16 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>   	at24->chip = chip;
>   	at24->num_addresses = num_addresses;
>
> -	at24->macc.read = at24_macc_read;
> -
>   	writable = !(chip.flags & AT24_FLAG_READONLY);
>   	if (writable) {
>   		if (!use_smbus || use_smbus_write) {
>
>   			unsigned write_max = chip.page_size;
>
> -			at24->macc.write = at24_macc_write;
> -
>   			if (write_max > io_limit)
>   				write_max = io_limit;
>   			if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
> @@ -683,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
>
>   	/* export data to kernel code */
>   	if (chip.setup)
> -		chip.setup(&at24->macc, chip.context);
> +		chip.setup(at24->nvmem, chip.context);
>
>   	return 0;
>
> diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
> index 542888504994..05b97144d342 100644
> --- a/include/linux/davinci_emac.h
> +++ b/include/linux/davinci_emac.h
> @@ -12,7 +12,7 @@
>   #define _LINUX_DAVINCI_EMAC_H
>
>   #include <linux/if_ether.h>
> -#include <linux/memory.h>
> +#include <linux/nvmem-consumer.h>
>
>   struct mdio_platform_data {
>   	unsigned long		bus_freq;
> @@ -46,5 +46,5 @@ enum {
>   	EMAC_VERSION_2,	/* DM646x */
>   };
>
> -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
> +void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
>   #endif
> diff --git a/include/linux/memory.h b/include/linux/memory.h
> index 8b8d8d12348e..b723a686fc10 100644
> --- a/include/linux/memory.h
> +++ b/include/linux/memory.h
> @@ -137,17 +137,6 @@ extern struct memory_block *find_memory_block(struct mem_section *);
>   #endif
>
>   /*
> - * 'struct memory_accessor' is a generic interface to provide
> - * in-kernel access to persistent memory such as i2c or SPI EEPROMs
> - */
> -struct memory_accessor {
> -	ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
> -			size_t count);
> -	ssize_t (*write)(struct memory_accessor *, const char *buf,
> -			 off_t offset, size_t count);
> -};
> -
> -/*
>    * Kernel text modification mutex, used for code patching. Users of this lock
>    * can sleep.
>    */
> diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
> index c42aa89d34ee..dc9a13e5acda 100644
> --- a/include/linux/platform_data/at24.h
> +++ b/include/linux/platform_data/at24.h
> @@ -9,7 +9,7 @@
>   #define _LINUX_AT24_H
>
>   #include <linux/types.h>
> -#include <linux/memory.h>
> +#include <linux/nvmem-consumer.h>
>
>   /**
>    * struct at24_platform_data - data to set up at24 (generic eeprom) driver
> @@ -17,7 +17,7 @@
>    * @page_size: number of byte which can be written in one go
>    * @flags: tunable options, check AT24_FLAG_* defines
>    * @setup: an optional callback invoked after eeprom is probed; enables kernel
> -	code to access eeprom via memory_accessor, see example
> +	code to access eeprom via nvmem, see example
>    * @context: optional parameter passed to setup()
>    *
>    * If you set up a custom eeprom type, please double-check the parameters.
> @@ -26,13 +26,13 @@
>    *
>    * An example in pseudo code for a setup() callback:
>    *
> - * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
> + * void get_mac_addr(struct mvmem_device *nvmem, void *context)
>    * {
>    *	u8 *mac_addr = ethernet_pdata->mac_addr;
>    *	off_t offset = context;
>    *
>    *	// Read MAC addr from EEPROM
> - *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
> + *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
>    *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
>    * }
>    *
> @@ -48,7 +48,7 @@ struct at24_platform_data {
>   #define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
>   #define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
>
> -	void		(*setup)(struct memory_accessor *, void *context);
> +	void		(*setup)(struct nvmem_device *nvmem, void *context);
>   	void		*context;
>   };
>
>

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Sekhar Nori]

On Friday 19 February 2016 04:21 PM, Srinivas Kandagatla wrote:
> + adding davinci maintainers to the loop.
> 
> Hi Andrew,
> 
> Not sure which tree should take the patch, but we needs acks from the
> mach-davinci maitainers.

Can someone forward the original patch to me so I can test it?

Thanks,
Sekhar

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Andrew Lunn]

On Tue, Feb 23, 2016 at 09:25:16PM +0530, Sekhar Nori wrote:
> On Friday 19 February 2016 04:21 PM, Srinivas Kandagatla wrote:
> > + adding davinci maintainers to the loop.
> > 
> > Hi Andrew,
> > 
> > Not sure which tree should take the patch, but we needs acks from the
> > mach-davinci maitainers.
> 
> Can someone forward the original patch to me so I can test it?

Hi Sekhar

Thanks for offering to test. You can get the series here:

File Edit Options Buffers Tools Help                                                                                                          
On Tue, Feb 23, 2016 at 09:25:16PM +0530, Sekhar Nori wrote:
> On Friday 19 February 2016 04:21 PM, Srinivas Kandagatla wrote:
> > + adding davinci maintainers to the loop.
> >
> > Hi Andrew,
> >
> > Not sure which tree should take the patch, but we needs acks from the
> > mach-davinci maitainers.
>
> Can someone forward the original patch to me so I can test it?

Hi Sekhar

Thanks for offering to test. You can get the series here:

https://github.com/lunn/linux.git branch v4.5-rc3-nvmem

Andrew

































-11-:**--F1  mutt-vps0-1000-25137-1885185674301814939   All L16    (Text Fly)-----------------------------------------------------------------
 v4.5-rc3-nvmem

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Sekhar Nori]

On Tuesday 23 February 2016 09:38 PM, Andrew Lunn wrote:
> Hi Sekhar
> 
> Thanks for offering to test. You can get the series here:
> 
> https://github.com/lunn/linux.git branch v4.5-rc3-nvmem

Tested on DM365 by verifying MAC address read continues to work

Tested-by: Sekhar Nori <nsekhar@ti.com>

Thanks,
Sekhar

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Andrew Lunn]

On Fri, Feb 26, 2016 at 08:55:11PM +0530, Sekhar Nori wrote:
> On Tuesday 23 February 2016 09:38 PM, Andrew Lunn wrote:
> > Hi Sekhar
> > 
> > Thanks for offering to test. You can get the series here:
> > 
> > https://github.com/lunn/linux.git branch v4.5-rc3-nvmem
> 
> Tested on DM365 by verifying MAC address read continues to work
> 
> Tested-by: Sekhar Nori <nsekhar@ti.com>

Hi Sekhar

Thanks for testing.

Srinivas, are you now happy to accept this whole series and then push
it to GregKH? I'm guessing his trees are going to close soon.

Thanks
	Andrew

Re: [PATCHv6 7/7] misc: at24: replace memory_accessor with nvmem_device_read

[Srinivas Kandagatla]

Hi Andrew,

On 26/02/16 17:33, Andrew Lunn wrote:
> On Fri, Feb 26, 2016 at 08:55:11PM +0530, Sekhar Nori wrote:
>> On Tuesday 23 February 2016 09:38 PM, Andrew Lunn wrote:
>>> Hi Sekhar
>>>
>>> Thanks for offering to test. You can get the series here:
>>>
>>> https://github.com/lunn/linux.git branch v4.5-rc3-nvmem
>>
>> Tested on DM365 by verifying MAC address read continues to work
>>
>> Tested-by: Sekhar Nori <nsekhar@ti.com>
>
> Hi Sekhar
>
> Thanks for testing.
>
> Srinivas, are you now happy to accept this whole series and then push
> it to GregKH? I'm guessing his trees are going to close soon.
Yes, thats true, But we can try and request Greg.

BTW, Am unable to apply the patches cleanly on top of 
https://git.kernel.org/cgit/linux/kernel/git/gregkh/char-misc.git/log/?h=char-misc-next

TBH, I think it would be faster if you can rebase them and send it 
directly to Greg KH with my Acks to all the series.


Thanks,
srini
>
> Thanks
> 	Andrew
>