[PATCH v2 2/2] net: Fix coding style warnings and errors.

[PATCH v2 2/2] net: Fix coding style warnings and errors.

[Amit Ghadge]

This is a patch to clean checkpatch warnings and errors
in the Space.c file.
Clean up the following warnings and errors.

WARNING :
* Block comments use * on subsequent lines
* Missing a blank line after declarations
* networking block comments don't use an empty /* line, use /*
* please, no space before tabs
* please, no spaces at the start of a line
* line over 80 characters

ERROR :
* code indent should use tabs where possible
* space prohibited after that open parenthesis '('

Signed-off-by: Amit Ghadge <amitg.b14@gmail.com>
---
Changes v2 :
  - Added space between the "/*" and "ISA".
---
 drivers/net/Space.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 67977f1..11fe712 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -35,8 +35,8 @@
 #include <net/Space.h>
 
 /* A unified ethernet device probe.  This is the easiest way to have every
-   ethernet adaptor have the name "eth[0123...]".
-   */
+ * ethernet adaptor have the name "eth[0123...]".
+ */
 
 struct devprobe2 {
 	struct net_device *(*probe)(int unit);
@@ -46,6 +46,7 @@ struct devprobe2 {
 static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
 {
 	struct net_device *dev;
+
 	for (; p->probe; p++) {
 		if (autoprobe && p->status)
 			continue;
@@ -58,8 +59,7 @@ static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
 	return -ENODEV;
 }
 
-/*
- * ISA probes that touch addresses < 0x400 (including those that also
+/* ISA probes that touch addresses < 0x400 (including those that also
  * look for EISA/PCI cards in addition to ISA cards).
  */
 static struct devprobe2 isa_probes[] __initdata = {
@@ -86,11 +86,11 @@ static struct devprobe2 isa_probes[] __initdata = {
 #endif
 #ifdef CONFIG_CS89x0
 #ifndef CONFIG_CS89x0_PLATFORM
- 	{cs89x0_probe, 0},
+	{cs89x0_probe, 0},
 #endif
 #endif
-#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET)	/* Intel I82596 */
-	{i82596_probe, 0},
+#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET)	/* Intel */
+	{i82596_probe, 0},					/* I82596 */
 #endif
 #ifdef CONFIG_NI65
 	{ni65_probe, 0},
@@ -118,13 +118,12 @@ static struct devprobe2 m68k_probes[] __initdata = {
 	{mac8390_probe, 0},
 #endif
 #ifdef CONFIG_MAC89x0
- 	{mac89x0_probe, 0},
+	{mac89x0_probe, 0},
 #endif
 	{NULL, 0},
 };
 
-/*
- * Unified ethernet device probe, segmented per architecture and
+/* Unified ethernet device probe, segmented per architecture and
  * per bus interface. This drives the legacy devices only for now.
  */
 
@@ -135,7 +134,7 @@ static void __init ethif_probe2(int unit)
 	if (base_addr == 1)
 		return;
 
-	(void)(	probe_list2(unit, m68k_probes, base_addr == 0) &&
+	(void)(probe_list2(unit, m68k_probes, base_addr == 0) &&
 		probe_list2(unit, isa_probes, base_addr == 0));
 }
 
-- 
2.5.5

Re: [PATCH v2 2/2] net: Fix coding style warnings and errors.

[David Miller]

Whenever you have to make changes to a patch within a series, you must always
resubmit the entire series, not just the one that need changes.

Re: [PATCH v2 2/2] net: Fix coding style warnings and errors.

[Amit Ghadge]

On Tue, May 17, 2016 at 02:01:52PM -0400, David Miller wrote:
> 
> Whenever you have to make changes to a patch within a series, you must always
> resubmit the entire series, not just the one that need changes.
You want say submit patch with version series v1, v2 or patches series?
If that is patches series, the first patch maintainer is different.
Should I resend this patch without patch series.


Thanks,
Amit G