* [PATCH 4.5 01/87] perf/x86/intel/pt: Generate PMI in the STOP region as well
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
@ 2016-05-30 20:48 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 02/87] perf/core: Fix perf_event_open() vs. execve() race Greg Kroah-Hartman
` (79 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:48 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Markus Metzger, Alexander Shishkin,
Peter Zijlstra (Intel),
Arnaldo Carvalho de Melo, Arnaldo Carvalho de Melo,
Borislav Petkov, Jiri Olsa, Linus Torvalds, Stephane Eranian,
Thomas Gleixner, Vince Weaver, vince, Ingo Molnar
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Shishkin <alexander.shishkin@linux.intel.com>
commit ab92b232ae05c382c3df0e3d6a5c6d16b639ac8c upstream.
Currently, the PT driver always sets the PMI bit one region (page) before
the STOP region so that we can wake up the consumer before we run out of
room in the buffer and have to disable the event. However, we also need
an interrupt in the last output region, so that we actually get to disable
the event (if no more room from new data is available at that point),
otherwise hardware just quietly refuses to start, but the event is
scheduled in and we end up losing trace data till the event gets removed.
For a cpu-wide event it is even worse since there may not be any
re-scheduling at all and no chance for the ring buffer code to notice
that its buffer is filled up and the event needs to be disabled (so that
the consumer can re-enable it when it finishes reading the data out). In
other words, all the trace data will be lost after the buffer gets filled
up.
This patch makes PT also generate a PMI when the last output region is
full.
Reported-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/1462886313-13660-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--- a/arch/x86/kernel/cpu/perf_event_intel_pt.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_pt.c
@@ -709,6 +709,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
/* clear STOP and INT from current entry */
buf->topa_index[buf->stop_pos]->stop = 0;
+ buf->topa_index[buf->stop_pos]->intr = 0;
buf->topa_index[buf->intr_pos]->intr = 0;
/* how many pages till the STOP marker */
@@ -733,6 +734,7 @@ static int pt_buffer_reset_markers(struct pt_buffer *buf,
buf->intr_pos = idx;
buf->topa_index[buf->stop_pos]->stop = 1;
+ buf->topa_index[buf->stop_pos]->intr = 1;
buf->topa_index[buf->intr_pos]->intr = 1;
return 0;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 02/87] perf/core: Fix perf_event_open() vs. execve() race
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
2016-05-30 20:48 ` [PATCH 4.5 01/87] perf/x86/intel/pt: Generate PMI in the STOP region as well Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 03/87] arm64: Fix typo in the pmdp_huge_get_and_clear() definition Greg Kroah-Hartman
` (78 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jann Horn, Peter Zijlstra (Intel),
Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
Stephane Eranian, Thomas Gleixner, Vince Weaver, Ingo Molnar,
He Kuang
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
commit 79c9ce57eb2d5f1497546a3946b4ae21b6fdc438 upstream.
Jann reported that the ptrace_may_access() check in
find_lively_task_by_vpid() is racy against exec().
Specifically:
perf_event_open() execve()
ptrace_may_access()
commit_creds()
... if (get_dumpable() != SUID_DUMP_USER)
perf_event_exit_task();
perf_install_in_context()
would result in installing a counter across the creds boundary.
Fix this by wrapping lots of perf_event_open() in cred_guard_mutex.
This should be fine as perf_event_exit_task() is already called with
cred_guard_mutex held, so all perf locks already nest inside it.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/events/core.c | 52 +++++++++++++++++++++++++++++++++++----------------
1 file changed, 36 insertions(+), 16 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1090,6 +1090,7 @@ static void put_ctx(struct perf_event_co
* function.
*
* Lock order:
+ * cred_guard_mutex
* task_struct::perf_event_mutex
* perf_event_context::mutex
* perf_event::child_mutex;
@@ -3415,7 +3416,6 @@ static struct task_struct *
find_lively_task_by_vpid(pid_t vpid)
{
struct task_struct *task;
- int err;
rcu_read_lock();
if (!vpid)
@@ -3429,16 +3429,7 @@ find_lively_task_by_vpid(pid_t vpid)
if (!task)
return ERR_PTR(-ESRCH);
- /* Reuse ptrace permission checks for now. */
- err = -EACCES;
- if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS))
- goto errout;
-
return task;
-errout:
- put_task_struct(task);
- return ERR_PTR(err);
-
}
/*
@@ -8360,6 +8351,24 @@ SYSCALL_DEFINE5(perf_event_open,
get_online_cpus();
+ if (task) {
+ err = mutex_lock_interruptible(&task->signal->cred_guard_mutex);
+ if (err)
+ goto err_cpus;
+
+ /*
+ * Reuse ptrace permission checks for now.
+ *
+ * We must hold cred_guard_mutex across this and any potential
+ * perf_install_in_context() call for this new event to
+ * serialize against exec() altering our credentials (and the
+ * perf_event_exit_task() that could imply).
+ */
+ err = -EACCES;
+ if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS))
+ goto err_cred;
+ }
+
if (flags & PERF_FLAG_PID_CGROUP)
cgroup_fd = pid;
@@ -8367,7 +8376,7 @@ SYSCALL_DEFINE5(perf_event_open,
NULL, NULL, cgroup_fd);
if (IS_ERR(event)) {
err = PTR_ERR(event);
- goto err_cpus;
+ goto err_cred;
}
if (is_sampling_event(event)) {
@@ -8426,11 +8435,6 @@ SYSCALL_DEFINE5(perf_event_open,
goto err_context;
}
- if (task) {
- put_task_struct(task);
- task = NULL;
- }
-
/*
* Look up the group leader (we will attach this event to it):
*/
@@ -8528,6 +8532,11 @@ SYSCALL_DEFINE5(perf_event_open,
WARN_ON_ONCE(ctx->parent_ctx);
+ /*
+ * This is the point on no return; we cannot fail hereafter. This is
+ * where we start modifying current state.
+ */
+
if (move_group) {
/*
* See perf_event_ctx_lock() for comments on the details
@@ -8599,6 +8608,11 @@ SYSCALL_DEFINE5(perf_event_open,
mutex_unlock(&gctx->mutex);
mutex_unlock(&ctx->mutex);
+ if (task) {
+ mutex_unlock(&task->signal->cred_guard_mutex);
+ put_task_struct(task);
+ }
+
put_online_cpus();
mutex_lock(¤t->perf_event_mutex);
@@ -8631,6 +8645,9 @@ err_alloc:
*/
if (!event_file)
free_event(event);
+err_cred:
+ if (task)
+ mutex_unlock(&task->signal->cred_guard_mutex);
err_cpus:
put_online_cpus();
err_task:
@@ -8915,6 +8932,9 @@ static void perf_event_exit_task_context
/*
* When a child task exits, feed back event values to parent events.
+ *
+ * Can be called with cred_guard_mutex held when called from
+ * install_exec_creds().
*/
void perf_event_exit_task(struct task_struct *child)
{
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 03/87] arm64: Fix typo in the pmdp_huge_get_and_clear() definition
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
2016-05-30 20:48 ` [PATCH 4.5 01/87] perf/x86/intel/pt: Generate PMI in the STOP region as well Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 02/87] perf/core: Fix perf_event_open() vs. execve() race Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 04/87] arm64: Ensure pmd_present() returns false after pmd_mknotpresent() Greg Kroah-Hartman
` (77 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Will Deacon, Catalin Marinas
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <catalin.marinas@arm.com>
commit 911f56eeb87ee378f5e215469268a7a2f68a5a8a upstream.
With hardware AF/DBM support, pmd modifications (transparent huge pages)
should be performed atomically using load/store exclusive. The initial
patches defined the get-and-clear function and __HAVE_ARCH_* macro
without the "huge" word, leaving the pmdp_huge_get_and_clear() to the
default, non-atomic implementation.
Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits")
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/pgtable.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -599,9 +599,9 @@ static inline pte_t ptep_get_and_clear(s
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define __HAVE_ARCH_PMDP_GET_AND_CLEAR
-static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
- unsigned long address, pmd_t *pmdp)
+#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
+static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
+ unsigned long address, pmd_t *pmdp)
{
return pte_pmd(ptep_get_and_clear(mm, address, (pte_t *)pmdp));
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 04/87] arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 03/87] arm64: Fix typo in the pmdp_huge_get_and_clear() definition Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 05/87] arm64: Implement ptep_set_access_flags() for hardware AF/DBM Greg Kroah-Hartman
` (76 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Will Deacon, Catalin Marinas
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <catalin.marinas@arm.com>
commit 5bb1cc0ff9a6b68871970737e6c4c16919928d8b upstream.
Currently, pmd_present() only checks for a non-zero value, returning
true even after pmd_mknotpresent() (which only clears the type bits).
This patch converts pmd_present() to using pte_present(), similar to the
other pmd_*() checks. As a side effect, it will return true for
PROT_NONE mappings, though they are not yet used by the kernel with
transparent huge pages.
For consistency, also change pmd_mknotpresent() to only clear the
PMD_SECT_VALID bit, even though the PMD_TABLE_BIT is already 0 for block
mappings (no functional change). The unused PMD_SECT_PROT_NONE
definition is removed as transparent huge pages use the pte page prot
values.
Fixes: 9c7e535fcc17 ("arm64: mm: Route pmd thp functions through pte equivalents")
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/pgtable-hwdef.h | 1 -
arch/arm64/include/asm/pgtable.h | 4 ++--
2 files changed, 2 insertions(+), 3 deletions(-)
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -133,7 +133,6 @@
* Section
*/
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE (_AT(pmdval_t, 1) << 58)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -356,6 +356,7 @@ static inline pgprot_t mk_sect_prot(pgpr
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd))
#define pmd_young(pmd) pte_young(pmd_pte(pmd))
#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -364,7 +365,7 @@ static inline pgprot_t mk_sect_prot(pgpr
#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd)))
#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd)))
#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_TYPE_MASK))
+#define pmd_mknotpresent(pmd) (__pmd(pmd_val(pmd) & ~PMD_SECT_VALID))
#define __HAVE_ARCH_PMD_WRITE
#define pmd_write(pmd) pte_write(pmd_pte(pmd))
@@ -403,7 +404,6 @@ extern pgprot_t phys_mem_access_prot(str
unsigned long size, pgprot_t vma_prot);
#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_present(pmd) (pmd_val(pmd))
#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 05/87] arm64: Implement ptep_set_access_flags() for hardware AF/DBM
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 04/87] arm64: Ensure pmd_present() returns false after pmd_mknotpresent() Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 06/87] arm64: Implement pmdp_set_access_flags() " Greg Kroah-Hartman
` (75 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Catalin Marinas, Ming Lei,
Julien Grall, Will Deacon
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <catalin.marinas@arm.com>
commit 66dbd6e61a526ae7d11a208238ae2c17e5cacb6b upstream.
When hardware updates of the access and dirty states are enabled, the
default ptep_set_access_flags() implementation based on calling
set_pte_at() directly is potentially racy. This triggers the "racy dirty
state clearing" warning in set_pte_at() because an existing writable PTE
is overridden with a clean entry.
There are two main scenarios for this situation:
1. The CPU getting an access fault does not support hardware updates of
the access/dirty flags. However, a different agent in the system
(e.g. SMMU) can do this, therefore overriding a writable entry with a
clean one could potentially lose the automatically updated dirty
status
2. A more complex situation is possible when all CPUs support hardware
AF/DBM:
a) Initial state: shareable + writable vma and pte_none(pte)
b) Read fault taken by two threads of the same process on different
CPUs
c) CPU0 takes the mmap_sem and proceeds to handling the fault. It
eventually reaches do_set_pte() which sets a writable + clean pte.
CPU0 releases the mmap_sem
d) CPU1 acquires the mmap_sem and proceeds to handle_pte_fault(). The
pte entry it reads is present, writable and clean and it continues
to pte_mkyoung()
e) CPU1 calls ptep_set_access_flags()
If between (d) and (e) the hardware (another CPU) updates the dirty
state (clears PTE_RDONLY), CPU1 will override the PTR_RDONLY bit
marking the entry clean again.
This patch implements an arm64-specific ptep_set_access_flags() function
to perform an atomic update of the PTE flags.
Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: reworded comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/pgtable.h | 5 +++
arch/arm64/mm/fault.c | 50 +++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -547,6 +547,11 @@ static inline pmd_t pmd_modify(pmd_t pmd
}
#ifdef CONFIG_ARM64_HW_AFDBM
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep,
+ pte_t entry, int dirty);
+
/*
* Atomic pte/pmd modifications.
*/
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -81,6 +81,56 @@ void show_pte(struct mm_struct *mm, unsi
printk("\n");
}
+#ifdef CONFIG_ARM64_HW_AFDBM
+/*
+ * This function sets the access flags (dirty, accessed), as well as write
+ * permission, and only to a more permissive setting.
+ *
+ * It needs to cope with hardware update of the accessed/dirty state by other
+ * agents in the system and can safely skip the __sync_icache_dcache() call as,
+ * like set_pte_at(), the PTE is never changed from no-exec to exec here.
+ *
+ * Returns whether or not the PTE actually changed.
+ */
+int ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep,
+ pte_t entry, int dirty)
+{
+ pteval_t old_pteval;
+ unsigned int tmp;
+
+ if (pte_same(*ptep, entry))
+ return 0;
+
+ /* only preserve the access flags and write permission */
+ pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY;
+
+ /*
+ * PTE_RDONLY is cleared by default in the asm below, so set it in
+ * back if necessary (read-only or clean PTE).
+ */
+ if (!pte_write(entry) || !dirty)
+ pte_val(entry) |= PTE_RDONLY;
+
+ /*
+ * Setting the flags must be done atomically to avoid racing with the
+ * hardware update of the access/dirty state.
+ */
+ asm volatile("// ptep_set_access_flags\n"
+ " prfm pstl1strm, %2\n"
+ "1: ldxr %0, %2\n"
+ " and %0, %0, %3 // clear PTE_RDONLY\n"
+ " orr %0, %0, %4 // set flags\n"
+ " stxr %w1, %0, %2\n"
+ " cbnz %w1, 1b\n"
+ : "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
+ : "L" (~PTE_RDONLY), "r" (pte_val(entry)));
+
+ flush_tlb_fix_spurious_fault(vma, address);
+ return 1;
+}
+#endif
+
/*
* The kernel tried to access some page that wasn't present.
*/
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 06/87] arm64: Implement pmdp_set_access_flags() for hardware AF/DBM
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 05/87] arm64: Implement ptep_set_access_flags() for hardware AF/DBM Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 07/87] arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str Greg Kroah-Hartman
` (74 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Will Deacon, Catalin Marinas
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Marinas <catalin.marinas@arm.com>
commit 282aa7051b0169991b34716f0f22d9c2f59c46c4 upstream.
The update to the accessed or dirty states for block mappings must be
done atomically on hardware with support for automatic AF/DBM. The
ptep_set_access_flags() function has been fixed as part of commit
66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware
AF/DBM"). This patch brings pmdp_set_access_flags() in line with the pte
counterpart.
Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits")
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/pgtable.h | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -552,6 +552,16 @@ extern int ptep_set_access_flags(struct
unsigned long address, pte_t *ptep,
pte_t entry, int dirty);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pmd_t *pmdp,
+ pmd_t entry, int dirty)
+{
+ return ptep_set_access_flags(vma, address, (pte_t *)pmdp, pmd_pte(entry), dirty);
+}
+#endif
+
/*
* Atomic pte/pmd modifications.
*/
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 07/87] arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 06/87] arm64: Implement pmdp_set_access_flags() " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 08/87] arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables Greg Kroah-Hartman
` (73 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Julien Grall, Will Deacon
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julien Grall <julien.grall@arm.com>
commit f228b494e56d949be8d8ea09d4f973d1979201bf upstream.
The loop that browses the array compat_hwcap_str will stop when a NULL
is encountered, however NULL is missing at the end of array. This will
lead to overrun until a NULL is found somewhere in the following memory.
In reality, this works out because the compat_hwcap2_str array tends to
follow immediately in memory, and that *is* terminated correctly.
Furthermore, the unsigned int compat_elf_hwcap is checked before
printing each capability, so we end up doing the right thing because
the size of the two arrays is less than 32. Still, this is an obvious
mistake and should be fixed.
Note for backporting: commit 12d11817eaafa414 ("arm64: Move
/proc/cpuinfo handling code") moved this code in v4.4. Prior to that
commit, the same change should be made in arch/arm64/kernel/setup.c.
Fixes: 44b82b7700d0 "arm64: Fix up /proc/cpuinfo"
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kernel/cpuinfo.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -85,7 +85,8 @@ static const char *const compat_hwcap_st
"idivt",
"vfpd32",
"lpae",
- "evtstrm"
+ "evtstrm",
+ NULL
};
static const char *const compat_hwcap2_str[] = {
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 08/87] arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 07/87] arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 09/87] kvm: arm64: Fix EC field in inject_abt64 Greg Kroah-Hartman
` (72 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Christoffer Dall, Marc Zyngier
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <marc.zyngier@arm.com>
commit d4b9e0790aa764c0b01e18d4e8d33e93ba36d51f upstream.
The ARM architecture mandates that when changing a page table entry
from a valid entry to another valid entry, an invalid entry is first
written, TLB invalidated, and only then the new entry being written.
The current code doesn't respect this, directly writing the new
entry and only then invalidating TLBs. Let's fix it up.
Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/kvm/mmu.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -886,11 +886,14 @@ static int stage2_set_pmd_huge(struct kv
VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
old_pmd = *pmd;
- kvm_set_pmd(pmd, *new_pmd);
- if (pmd_present(old_pmd))
+ if (pmd_present(old_pmd)) {
+ pmd_clear(pmd);
kvm_tlb_flush_vmid_ipa(kvm, addr);
- else
+ } else {
get_page(virt_to_page(pmd));
+ }
+
+ kvm_set_pmd(pmd, *new_pmd);
return 0;
}
@@ -939,12 +942,14 @@ static int stage2_set_pte(struct kvm *kv
/* Create 2nd stage page table mapping - Level 3 */
old_pte = *pte;
- kvm_set_pte(pte, *new_pte);
- if (pte_present(old_pte))
+ if (pte_present(old_pte)) {
+ kvm_set_pte(pte, __pte(0));
kvm_tlb_flush_vmid_ipa(kvm, addr);
- else
+ } else {
get_page(virt_to_page(pte));
+ }
+ kvm_set_pte(pte, *new_pte);
return 0;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 09/87] kvm: arm64: Fix EC field in inject_abt64
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 08/87] arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 10/87] remove directory incorrectly tries to set delete on close on non-empty directories Greg Kroah-Hartman
` (71 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matt Evans, Marc Zyngier, Christoffer Dall
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matt Evans <matt.evans@arm.com>
commit e4fe9e7dc3828bf6a5714eb3c55aef6260d823a2 upstream.
The EC field of the constructed ESR is conditionally modified by ORing in
ESR_ELx_EC_DABT_LOW for a data abort. However, ESR_ELx_EC_SHIFT is missing
from this condition.
Signed-off-by: Matt Evans <matt.evans@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kvm/inject_fault.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -162,7 +162,7 @@ static void inject_abt64(struct kvm_vcpu
esr |= (ESR_ELx_EC_IABT_CUR << ESR_ELx_EC_SHIFT);
if (!is_iabt)
- esr |= ESR_ELx_EC_DABT_LOW;
+ esr |= ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT;
vcpu_sys_reg(vcpu, ESR_EL1) = esr | ESR_ELx_FSC_EXTABT;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 10/87] remove directory incorrectly tries to set delete on close on non-empty directories
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 09/87] kvm: arm64: Fix EC field in inject_abt64 Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 11/87] fs/cifs: correctly to anonymous authentication via NTLMSSP Greg Kroah-Hartman
` (70 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steve French, Sachin Prabhu
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French <smfrench@gmail.com>
commit 897fba1172d637d344f009d700f7eb8a1fa262f1 upstream.
Wrong return code was being returned on SMB3 rmdir of
non-empty directory.
For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.
With this patch on smb3 mounts we correctly return
"DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2glob.h | 1 +
fs/cifs/smb2inode.c | 8 ++++++--
fs/cifs/smb2pdu.c | 16 ++++++++++++++++
fs/cifs/smb2proto.h | 2 ++
4 files changed, 25 insertions(+), 2 deletions(-)
--- a/fs/cifs/smb2glob.h
+++ b/fs/cifs/smb2glob.h
@@ -44,6 +44,7 @@
#define SMB2_OP_DELETE 7
#define SMB2_OP_HARDLINK 8
#define SMB2_OP_SET_EOF 9
+#define SMB2_OP_RMDIR 10
/* Used when constructing chained read requests. */
#define CHAINED_REQUEST 1
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -80,6 +80,10 @@ smb2_open_op_close(const unsigned int xi
* SMB2_open() call.
*/
break;
+ case SMB2_OP_RMDIR:
+ tmprc = SMB2_rmdir(xid, tcon, fid.persistent_fid,
+ fid.volatile_fid);
+ break;
case SMB2_OP_RENAME:
tmprc = SMB2_rename(xid, tcon, fid.persistent_fid,
fid.volatile_fid, (__le16 *)data);
@@ -191,8 +195,8 @@ smb2_rmdir(const unsigned int xid, struc
struct cifs_sb_info *cifs_sb)
{
return smb2_open_op_close(xid, tcon, cifs_sb, name, DELETE, FILE_OPEN,
- CREATE_NOT_FILE | CREATE_DELETE_ON_CLOSE,
- NULL, SMB2_OP_DELETE);
+ CREATE_NOT_FILE,
+ NULL, SMB2_OP_RMDIR);
}
int
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2575,6 +2575,22 @@ SMB2_rename(const unsigned int xid, stru
}
int
+SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+ u64 persistent_fid, u64 volatile_fid)
+{
+ __u8 delete_pending = 1;
+ void *data;
+ unsigned int size;
+
+ data = &delete_pending;
+ size = 1; /* sizeof __u8 */
+
+ return send_set_info(xid, tcon, persistent_fid, volatile_fid,
+ current->tgid, FILE_DISPOSITION_INFORMATION, 1, &data,
+ &size);
+}
+
+int
SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid, __le16 *target_file)
{
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -141,6 +141,8 @@ extern int SMB2_query_directory(const un
extern int SMB2_rename(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid,
__le16 *target_file);
+extern int SMB2_rmdir(const unsigned int xid, struct cifs_tcon *tcon,
+ u64 persistent_fid, u64 volatile_fid);
extern int SMB2_set_hardlink(const unsigned int xid, struct cifs_tcon *tcon,
u64 persistent_fid, u64 volatile_fid,
__le16 *target_file);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 11/87] fs/cifs: correctly to anonymous authentication via NTLMSSP
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 10/87] remove directory incorrectly tries to set delete on close on non-empty directories Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 12/87] fs/cifs: correctly to anonymous authentication for the LANMAN authentication Greg Kroah-Hartman
` (69 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefan Metzmacher, Steve French
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Metzmacher <metze@samba.org>
commit cfda35d98298131bf38fbad3ce4cd5ecb3cf18db upstream.
See [MS-NLMP] 3.2.5.1.2 Server Receives an AUTHENTICATE_MESSAGE from the Client:
...
Set NullSession to FALSE
If (AUTHENTICATE_MESSAGE.UserNameLen == 0 AND
AUTHENTICATE_MESSAGE.NtChallengeResponse.Length == 0 AND
(AUTHENTICATE_MESSAGE.LmChallengeResponse == Z(1)
OR
AUTHENTICATE_MESSAGE.LmChallengeResponse.Length == 0))
-- Special case: client requested anonymous authentication
Set NullSession to TRUE
...
Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.
For Samba it's the "map to guest = bad user" option.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/sess.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -400,19 +400,27 @@ int build_ntlmssp_auth_blob(unsigned cha
sec_blob->LmChallengeResponse.MaximumLength = 0;
sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
- rc = setup_ntlmv2_rsp(ses, nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
- goto setup_ntlmv2_ret;
- }
- memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
+ if (ses->user_name != NULL) {
+ rc = setup_ntlmv2_rsp(ses, nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLMSSP authentication\n", rc);
+ goto setup_ntlmv2_ret;
+ }
+ memcpy(tmp, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ tmp += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
- sec_blob->NtChallengeResponse.Length =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- sec_blob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.Length =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ } else {
+ /*
+ * don't send an NT Response for anonymous access
+ */
+ sec_blob->NtChallengeResponse.Length = 0;
+ sec_blob->NtChallengeResponse.MaximumLength = 0;
+ }
if (ses->domainName == NULL) {
sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 12/87] fs/cifs: correctly to anonymous authentication for the LANMAN authentication
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 11/87] fs/cifs: correctly to anonymous authentication via NTLMSSP Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 13/87] fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication Greg Kroah-Hartman
` (68 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefan Metzmacher, Steve French
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Metzmacher <metze@samba.org>
commit fa8f3a354bb775ec586e4475bcb07f7dece97e0c upstream.
Only server which map unknown users to guest will allow
access using a non-null LMChallengeResponse.
For Samba it's the "map to guest = bad user" option.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/sess.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -678,20 +678,24 @@ sess_auth_lanman(struct sess_data *sess_
pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
- /* no capabilities flags in old lanman negotiation */
- pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+ if (ses->user_name != NULL) {
+ /* no capabilities flags in old lanman negotiation */
+ pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
- /* Calculate hash with password and copy into bcc_ptr.
- * Encryption Key (stored as in cryptkey) gets used if the
- * security mode bit in Negottiate Protocol response states
- * to use challenge/response method (i.e. Password bit is 1).
- */
- rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
- ses->server->sec_mode & SECMODE_PW_ENCRYPT ?
- true : false, lnm_session_key);
+ /* Calculate hash with password and copy into bcc_ptr.
+ * Encryption Key (stored as in cryptkey) gets used if the
+ * security mode bit in Negottiate Protocol response states
+ * to use challenge/response method (i.e. Password bit is 1).
+ */
+ rc = calc_lanman_hash(ses->password, ses->server->cryptkey,
+ ses->server->sec_mode & SECMODE_PW_ENCRYPT ?
+ true : false, lnm_session_key);
- memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ } else {
+ pSMB->old_req.PasswordLength = 0;
+ }
/*
* can not sign if LANMAN negotiated so no need
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 13/87] fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 12/87] fs/cifs: correctly to anonymous authentication for the LANMAN authentication Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 14/87] fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication Greg Kroah-Hartman
` (67 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefan Metzmacher, Steve French
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Metzmacher <metze@samba.org>
commit 777f69b8d26bf35ade4a76b08f203c11e048365d upstream.
Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.
For Samba it's the "map to guest = bad user" option.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/sess.c | 41 +++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -781,26 +781,31 @@ sess_auth_ntlm(struct sess_data *sess_da
capabilities = cifs_ssetup_hdr(ses, pSMB);
pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_AUTH_RESP_SIZE);
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+ if (ses->user_name != NULL) {
+ pSMB->req_no_secext.CaseInsensitivePasswordLength =
+ cpu_to_le16(CIFS_AUTH_RESP_SIZE);
+ pSMB->req_no_secext.CaseSensitivePasswordLength =
+ cpu_to_le16(CIFS_AUTH_RESP_SIZE);
- /* calculate ntlm response and session key */
- rc = setup_ntlm_response(ses, sess_data->nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLM authentication\n",
- rc);
- goto out;
- }
+ /* calculate ntlm response and session key */
+ rc = setup_ntlm_response(ses, sess_data->nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLM authentication\n",
+ rc);
+ goto out;
+ }
- /* copy ntlm response */
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- CIFS_AUTH_RESP_SIZE);
- bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ /* copy ntlm response */
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
+ } else {
+ pSMB->req_no_secext.CaseInsensitivePasswordLength = 0;
+ pSMB->req_no_secext.CaseSensitivePasswordLength = 0;
+ }
if (ses->capabilities & CAP_UNICODE) {
/* unicode strings must be word aligned */
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 14/87] fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 13/87] fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 15/87] asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions Greg Kroah-Hartman
` (66 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefan Metzmacher, Steve French
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Metzmacher <metze@samba.org>
commit 1a967d6c9b39c226be1b45f13acd4d8a5ab3dc44 upstream.
Only server which map unknown users to guest will allow
access using a non-null NTLMv2_Response.
For Samba it's the "map to guest = bad user" option.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/sess.c | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -895,22 +895,26 @@ sess_auth_ntlmv2(struct sess_data *sess_
/* LM2 password would be here if we supported it */
pSMB->req_no_secext.CaseInsensitivePasswordLength = 0;
- /* calculate nlmv2 response and session key */
- rc = setup_ntlmv2_rsp(ses, sess_data->nls_cp);
- if (rc) {
- cifs_dbg(VFS, "Error %d during NTLMv2 authentication\n", rc);
- goto out;
- }
+ if (ses->user_name != NULL) {
+ /* calculate nlmv2 response and session key */
+ rc = setup_ntlmv2_rsp(ses, sess_data->nls_cp);
+ if (rc) {
+ cifs_dbg(VFS, "Error %d during NTLMv2 authentication\n", rc);
+ goto out;
+ }
- memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
- ses->auth_key.len - CIFS_SESS_KEY_SIZE);
- bcc_ptr += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
+ memcpy(bcc_ptr, ses->auth_key.response + CIFS_SESS_KEY_SIZE,
+ ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ bcc_ptr += ses->auth_key.len - CIFS_SESS_KEY_SIZE;
- /* set case sensitive password length after tilen may get
- * assigned, tilen is 0 otherwise.
- */
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ /* set case sensitive password length after tilen may get
+ * assigned, tilen is 0 otherwise.
+ */
+ pSMB->req_no_secext.CaseSensitivePasswordLength =
+ cpu_to_le16(ses->auth_key.len - CIFS_SESS_KEY_SIZE);
+ } else {
+ pSMB->req_no_secext.CaseSensitivePasswordLength = 0;
+ }
if (ses->capabilities & CAP_UNICODE) {
if (sess_data->iov[0].iov_len % 2) {
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 15/87] asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 14/87] fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 16/87] ring-buffer: Use long for nr_pages to avoid overflow failures Greg Kroah-Hartman
` (65 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dean Jenkins, David B. Robins,
Mark Craske, Emil Goode, David S. Miller, YongQin Liu,
Guodong Xu, Ivan Vecera, linux-usb, netdev, John Stultz
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <john.stultz@linaro.org>
commit cd9e2e5d3ff148be9ea210f622ce3e8e8292fcd6 upstream.
In testing with HiKey, we found that since
commit 3f30b158eba5 ("asix: On RX avoid creating bad Ethernet
frames"),
we're seeing lots of noise during network transfers:
[ 239.027993] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[ 239.037310] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x54ebb5ec, offset 4
[ 239.045519] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xcdffe7a2, offset 4
[ 239.275044] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[ 239.284355] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1d36f59d, offset 4
[ 239.292541] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xaef3c1e9, offset 4
[ 239.518996] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[ 239.528300] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x2881912, offset 4
[ 239.536413] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x5638f7e2, offset 4
And network throughput ends up being pretty bursty and slow with
a overall throughput of at best ~30kB/s (where as previously we
got 1.1MB/s with the slower USB1.1 "full speed" host).
We found the issue also was reproducible on a x86_64 system,
using a "high-speed" USB2.0 port but the throughput did not
measurably drop (possibly due to the scp transfer being cpu
bound on my slow test hardware).
After lots of debugging, I found the check added in the
problematic commit seems to be calculating the offset
incorrectly.
In the normal case, in the main loop of the function, we do:
(where offset is zero, or set to "offset += (copy_length + 1) &
0xfffe" in the previous loop)
rx->header = get_unaligned_le32(skb->data +
offset);
offset += sizeof(u32);
But the problematic patch calculates:
offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
rx->header = get_unaligned_le32(skb->data + offset);
Adding some debug logic to check those offset calculation used
to find rx->header, the one in problematic code is always too
large by sizeof(u32).
Thus, this patch removes the incorrect " + sizeof(u32)" addition
in the problematic calculation, and resolves the issue.
Cc: Dean Jenkins <Dean_Jenkins@mentor.com>
Cc: "David B. Robins" <linux@davidrobins.net>
Cc: Mark Craske <Mark_Craske@mentor.com>
Cc: Emil Goode <emilgoode@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/asix_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -66,7 +66,7 @@ int asix_rx_fixup_internal(struct usbnet
* buffer.
*/
if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
- offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
+ offset = ((rx->remaining + 1) & 0xfffe);
rx->header = get_unaligned_le32(skb->data + offset);
offset = 0;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 16/87] ring-buffer: Use long for nr_pages to avoid overflow failures
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 15/87] asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 17/87] ring-buffer: Prevent overflow of size in ring_buffer_resize() Greg Kroah-Hartman
` (64 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hao Qin, Steven Rostedt
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
commit 9b94a8fba501f38368aef6ac1b30e7335252a220 upstream.
The size variable to change the ring buffer in ftrace is a long. The
nr_pages used to update the ring buffer based on the size is int. On 64 bit
machines this can cause an overflow problem.
For example, the following will cause the ring buffer to crash:
# cd /sys/kernel/debug/tracing
# echo 10 > buffer_size_kb
# echo 8556384240 > buffer_size_kb
Then you get the warning of:
WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260
Which is:
RB_WARN_ON(cpu_buffer, nr_removed);
Note each ring buffer page holds 4080 bytes.
This is because:
1) 10 causes the ring buffer to have 3 pages.
(10kb requires 3 * 4080 pages to hold)
2) (2^31 / 2^10 + 1) * 4080 = 8556384240
The value written into buffer_size_kb is shifted by 10 and then passed
to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760
3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE
which is 4080. 8761737461760 / 4080 = 2147484672
4) nr_pages is subtracted from the current nr_pages (3) and we get:
2147484669. This value is saved in a signed integer nr_pages_to_update
5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int
turns into the value of -2147482627
6) As the value is a negative number, in update_pages_handler() it is
negated and passed to rb_remove_pages() and 2147482627 pages will
be removed, which is much larger than 3 and it causes the warning
because not all the pages asked to be removed were removed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001
Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer")
Reported-by: Hao Qin <QEver.cn@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -437,7 +437,7 @@ struct ring_buffer_per_cpu {
raw_spinlock_t reader_lock; /* serialize readers */
arch_spinlock_t lock;
struct lock_class_key lock_key;
- unsigned int nr_pages;
+ unsigned long nr_pages;
unsigned int current_context;
struct list_head *pages;
struct buffer_page *head_page; /* read from head */
@@ -458,7 +458,7 @@ struct ring_buffer_per_cpu {
u64 write_stamp;
u64 read_stamp;
/* ring buffer pages to update, > 0 to add, < 0 to remove */
- int nr_pages_to_update;
+ long nr_pages_to_update;
struct list_head new_pages; /* new pages to add */
struct work_struct update_pages_work;
struct completion update_done;
@@ -1128,10 +1128,10 @@ static int rb_check_pages(struct ring_bu
return 0;
}
-static int __rb_allocate_pages(int nr_pages, struct list_head *pages, int cpu)
+static int __rb_allocate_pages(long nr_pages, struct list_head *pages, int cpu)
{
- int i;
struct buffer_page *bpage, *tmp;
+ long i;
for (i = 0; i < nr_pages; i++) {
struct page *page;
@@ -1168,7 +1168,7 @@ free_pages:
}
static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
- unsigned nr_pages)
+ unsigned long nr_pages)
{
LIST_HEAD(pages);
@@ -1193,7 +1193,7 @@ static int rb_allocate_pages(struct ring
}
static struct ring_buffer_per_cpu *
-rb_allocate_cpu_buffer(struct ring_buffer *buffer, int nr_pages, int cpu)
+rb_allocate_cpu_buffer(struct ring_buffer *buffer, long nr_pages, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct buffer_page *bpage;
@@ -1293,8 +1293,9 @@ struct ring_buffer *__ring_buffer_alloc(
struct lock_class_key *key)
{
struct ring_buffer *buffer;
+ long nr_pages;
int bsize;
- int cpu, nr_pages;
+ int cpu;
/* keep it in its own cache line */
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
@@ -1420,12 +1421,12 @@ static inline unsigned long rb_page_writ
}
static int
-rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned int nr_pages)
+rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
{
struct list_head *tail_page, *to_remove, *next_page;
struct buffer_page *to_remove_page, *tmp_iter_page;
struct buffer_page *last_page, *first_page;
- unsigned int nr_removed;
+ unsigned long nr_removed;
unsigned long head_bit;
int page_entries;
@@ -1642,7 +1643,7 @@ int ring_buffer_resize(struct ring_buffe
int cpu_id)
{
struct ring_buffer_per_cpu *cpu_buffer;
- unsigned nr_pages;
+ unsigned long nr_pages;
int cpu, err = 0;
/*
@@ -4640,8 +4641,9 @@ static int rb_cpu_notify(struct notifier
struct ring_buffer *buffer =
container_of(self, struct ring_buffer, cpu_notify);
long cpu = (long)hcpu;
- int cpu_i, nr_pages_same;
- unsigned int nr_pages;
+ long nr_pages_same;
+ int cpu_i;
+ unsigned long nr_pages;
switch (action) {
case CPU_UP_PREPARE:
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 17/87] ring-buffer: Prevent overflow of size in ring_buffer_resize()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 16/87] ring-buffer: Use long for nr_pages to avoid overflow failures Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 18/87] crypto: caam - fix caam_jr_alloc() ret code Greg Kroah-Hartman
` (63 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
commit 59643d1535eb220668692a5359de22545af579f6 upstream.
If the size passed to ring_buffer_resize() is greater than MAX_LONG - BUF_PAGE_SIZE
then the DIV_ROUND_UP() will return zero.
Here's the details:
# echo 18014398509481980 > /sys/kernel/debug/tracing/buffer_size_kb
tracing_entries_write() processes this and converts kb to bytes.
18014398509481980 << 10 = 18446744073709547520
and this is passed to ring_buffer_resize() as unsigned long size.
size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
Where DIV_ROUND_UP(a, b) is (a + b - 1)/b
BUF_PAGE_SIZE is 4080 and here
18446744073709547520 + 4080 - 1 = 18446744073709551599
where 18446744073709551599 is still smaller than 2^64
2^64 - 18446744073709551599 = 17
But now 18446744073709551599 / 4080 = 4521260802379792
and size = size * 4080 = 18446744073709551360
This is checked to make sure its still greater than 2 * 4080,
which it is.
Then we convert to the number of buffer pages needed.
nr_page = DIV_ROUND_UP(size, BUF_PAGE_SIZE)
but this time size is 18446744073709551360 and
2^64 - (18446744073709551360 + 4080 - 1) = -3823
Thus it overflows and the resulting number is less than 4080, which makes
3823 / 4080 = 0
an nr_pages is set to this. As we already checked against the minimum that
nr_pages may be, this causes the logic to fail as well, and we crash the
kernel.
There's no reason to have the two DIV_ROUND_UP() (that's just result of
historical code changes), clean up the code and fix this bug.
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1657,14 +1657,13 @@ int ring_buffer_resize(struct ring_buffe
!cpumask_test_cpu(cpu_id, buffer->cpumask))
return size;
- size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
- size *= BUF_PAGE_SIZE;
+ nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
/* we need a minimum of two pages */
- if (size < BUF_PAGE_SIZE * 2)
- size = BUF_PAGE_SIZE * 2;
+ if (nr_pages < 2)
+ nr_pages = 2;
- nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
+ size = nr_pages * BUF_PAGE_SIZE;
/*
* Don't succeed if resizing is disabled, as a reader might be
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 18/87] crypto: caam - fix caam_jr_alloc() ret code
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 17/87] ring-buffer: Prevent overflow of size in ring_buffer_resize() Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 19/87] crypto: talitos - fix ahash algorithms registration Greg Kroah-Hartman
` (62 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Catalin Vasile, Herbert Xu
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Catalin Vasile <cata.vasile@nxp.com>
commit e930c765ca5c6b039cd22ebfb4504ea7b5dab43d upstream.
caam_jr_alloc() used to return NULL if a JR device could not be
allocated for a session. In turn, every user of this function used
IS_ERR() function to verify if anything went wrong, which does NOT look
for NULL values. This made the kernel crash if the sanity check failed,
because the driver continued to think it had allocated a valid JR dev
instance to the session and at some point it tries to do a caam_jr_free()
on a NULL JR dev pointer.
This patch is a fix for this issue.
Signed-off-by: Catalin Vasile <cata.vasile@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/caam/jr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/caam/jr.c
+++ b/drivers/crypto/caam/jr.c
@@ -248,7 +248,7 @@ static void caam_jr_dequeue(unsigned lon
struct device *caam_jr_alloc(void)
{
struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
- struct device *dev = NULL;
+ struct device *dev = ERR_PTR(-ENODEV);
int min_tfm_cnt = INT_MAX;
int tfm_cnt;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 19/87] crypto: talitos - fix ahash algorithms registration
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 18/87] crypto: caam - fix caam_jr_alloc() ret code Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 20/87] crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore} Greg Kroah-Hartman
` (61 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Eymann, Horia Geant?, Herbert Xu
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Horia Geant? <horia.geanta@nxp.com>
commit 3639ca840df953f9af6f15fc8a6bf77f19075ab1 upstream.
Provide hardware state import/export functionality, as mandated by
commit 8996eafdcbad ("crypto: ahash - ensure statesize is non-zero")
Reported-by: Jonas Eymann <J.Eymann@gmx.net>
Signed-off-by: Horia Geant? <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/talitos.c | 64 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -835,6 +835,16 @@ struct talitos_ahash_req_ctx {
struct scatterlist *psrc;
};
+struct talitos_export_state {
+ u32 hw_context[TALITOS_MDEU_MAX_CONTEXT_SIZE / sizeof(u32)];
+ u8 buf[HASH_MAX_BLOCK_SIZE];
+ unsigned int swinit;
+ unsigned int first;
+ unsigned int last;
+ unsigned int to_hash_later;
+ unsigned int nbuf;
+};
+
static int aead_setkey(struct crypto_aead *authenc,
const u8 *key, unsigned int keylen)
{
@@ -1981,6 +1991,46 @@ static int ahash_digest(struct ahash_req
return ahash_process_req(areq, areq->nbytes);
}
+static int ahash_export(struct ahash_request *areq, void *out)
+{
+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
+ struct talitos_export_state *export = out;
+
+ memcpy(export->hw_context, req_ctx->hw_context,
+ req_ctx->hw_context_size);
+ memcpy(export->buf, req_ctx->buf, req_ctx->nbuf);
+ export->swinit = req_ctx->swinit;
+ export->first = req_ctx->first;
+ export->last = req_ctx->last;
+ export->to_hash_later = req_ctx->to_hash_later;
+ export->nbuf = req_ctx->nbuf;
+
+ return 0;
+}
+
+static int ahash_import(struct ahash_request *areq, const void *in)
+{
+ struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ const struct talitos_export_state *export = in;
+
+ memset(req_ctx, 0, sizeof(*req_ctx));
+ req_ctx->hw_context_size =
+ (crypto_ahash_digestsize(tfm) <= SHA256_DIGEST_SIZE)
+ ? TALITOS_MDEU_CONTEXT_SIZE_MD5_SHA1_SHA256
+ : TALITOS_MDEU_CONTEXT_SIZE_SHA384_SHA512;
+ memcpy(req_ctx->hw_context, export->hw_context,
+ req_ctx->hw_context_size);
+ memcpy(req_ctx->buf, export->buf, export->nbuf);
+ req_ctx->swinit = export->swinit;
+ req_ctx->first = export->first;
+ req_ctx->last = export->last;
+ req_ctx->to_hash_later = export->to_hash_later;
+ req_ctx->nbuf = export->nbuf;
+
+ return 0;
+}
+
struct keyhash_result {
struct completion completion;
int err;
@@ -2458,6 +2508,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = MD5_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "md5",
.cra_driver_name = "md5-talitos",
@@ -2473,6 +2524,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA1_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "sha1",
.cra_driver_name = "sha1-talitos",
@@ -2488,6 +2540,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA224_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "sha224",
.cra_driver_name = "sha224-talitos",
@@ -2503,6 +2556,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA256_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "sha256",
.cra_driver_name = "sha256-talitos",
@@ -2518,6 +2572,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA384_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "sha384",
.cra_driver_name = "sha384-talitos",
@@ -2533,6 +2588,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA512_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "sha512",
.cra_driver_name = "sha512-talitos",
@@ -2548,6 +2604,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = MD5_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(md5)",
.cra_driver_name = "hmac-md5-talitos",
@@ -2563,6 +2620,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA1_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(sha1)",
.cra_driver_name = "hmac-sha1-talitos",
@@ -2578,6 +2636,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA224_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(sha224)",
.cra_driver_name = "hmac-sha224-talitos",
@@ -2593,6 +2652,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA256_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(sha256)",
.cra_driver_name = "hmac-sha256-talitos",
@@ -2608,6 +2668,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA384_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(sha384)",
.cra_driver_name = "hmac-sha384-talitos",
@@ -2623,6 +2684,7 @@ static struct talitos_alg_template drive
{ .type = CRYPTO_ALG_TYPE_AHASH,
.alg.hash = {
.halg.digestsize = SHA512_DIGEST_SIZE,
+ .halg.statesize = sizeof(struct talitos_export_state),
.halg.base = {
.cra_name = "hmac(sha512)",
.cra_driver_name = "hmac-sha512-talitos",
@@ -2814,6 +2876,8 @@ static struct talitos_crypto_alg *talito
t_alg->algt.alg.hash.finup = ahash_finup;
t_alg->algt.alg.hash.digest = ahash_digest;
t_alg->algt.alg.hash.setkey = ahash_setkey;
+ t_alg->algt.alg.hash.import = ahash_import;
+ t_alg->algt.alg.hash.export = ahash_export;
if (!(priv->features & TALITOS_FTR_HMAC_OK) &&
!strncmp(alg->cra_name, "hmac", 4)) {
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 20/87] crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 19/87] crypto: talitos - fix ahash algorithms registration Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 21/87] clk: qcom: msm8916: Fix crypto clock flags Greg Kroah-Hartman
` (60 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, LABBE Corentin, Herbert Xu
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corentin LABBE <clabbe.montjoie@gmail.com>
commit bdb6cf9f6fe6d9af905ea34b7c4bb78ea601329e upstream.
The current sun4i-ss driver could generate data corruption when ciphering/deciphering.
It occurs randomly on end of handled data.
No root cause have been found and the only way to remove it is to replace
all spin_lock_bh by their irq counterparts.
Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-cipher.c
@@ -35,6 +35,7 @@ static int sun4i_ss_opti_poll(struct abl
unsigned int todo;
struct sg_mapping_iter mi, mo;
unsigned int oi, oo; /* offset for in and out */
+ unsigned long flags;
if (areq->nbytes == 0)
return 0;
@@ -49,7 +50,7 @@ static int sun4i_ss_opti_poll(struct abl
return -EINVAL;
}
- spin_lock_bh(&ss->slock);
+ spin_lock_irqsave(&ss->slock, flags);
for (i = 0; i < op->keylen; i += 4)
writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -117,7 +118,7 @@ release_ss:
sg_miter_stop(&mi);
sg_miter_stop(&mo);
writel(0, ss->base + SS_CTL);
- spin_unlock_bh(&ss->slock);
+ spin_unlock_irqrestore(&ss->slock, flags);
return err;
}
@@ -149,6 +150,7 @@ static int sun4i_ss_cipher_poll(struct a
unsigned int ob = 0; /* offset in buf */
unsigned int obo = 0; /* offset in bufo*/
unsigned int obl = 0; /* length of data in bufo */
+ unsigned long flags;
if (areq->nbytes == 0)
return 0;
@@ -181,7 +183,7 @@ static int sun4i_ss_cipher_poll(struct a
if (no_chunk == 1)
return sun4i_ss_opti_poll(areq);
- spin_lock_bh(&ss->slock);
+ spin_lock_irqsave(&ss->slock, flags);
for (i = 0; i < op->keylen; i += 4)
writel(*(op->key + i / 4), ss->base + SS_KEY0 + i);
@@ -308,7 +310,7 @@ release_ss:
sg_miter_stop(&mi);
sg_miter_stop(&mo);
writel(0, ss->base + SS_CTL);
- spin_unlock_bh(&ss->slock);
+ spin_unlock_irqrestore(&ss->slock, flags);
return err;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 21/87] clk: qcom: msm8916: Fix crypto clock flags
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 20/87] crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore} Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 22/87] sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems Greg Kroah-Hartman
` (59 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Gross, Stephen Boyd
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Gross <andy.gross@linaro.org>
commit 2a0974aa1a0b40a92387ea03dbfeacfbc9ba182c upstream.
This patch adds the CLK_SET_RATE_PARENT flag for the crypto core and
ahb blocks. Without this flag, clk_set_rate can fail for certain
frequency requests.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Fixes: 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/qcom/gcc-msm8916.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -2346,6 +2346,7 @@ static struct clk_branch gcc_crypto_ahb_
"pcnoc_bfdcd_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2381,6 +2382,7 @@ static struct clk_branch gcc_crypto_clk
"crypto_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 22/87] sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 21/87] clk: qcom: msm8916: Fix crypto clock flags Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 23/87] mfd: omap-usb-tll: Fix scheduling while atomic BUG Greg Kroah-Hartman
` (58 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Damien Wyart, Vik Heyndrickx,
Peter Zijlstra (Intel),
Doug Smythies, Linus Torvalds, Mike Galbraith, Thomas Gleixner,
Ingo Molnar
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vik Heyndrickx <vik.heyndrickx@veribox.net>
commit 20878232c52329f92423d27a60e48b6a6389e0dd upstream.
Systems show a minimal load average of 0.00, 0.01, 0.05 even when they
have no load at all.
Uptime and /proc/loadavg on all systems with kernels released during the
last five years up until kernel version 4.6-rc5, show a 5- and 15-minute
minimum loadavg of 0.01 and 0.05 respectively. This should be 0.00 on
idle systems, but the way the kernel calculates this value prevents it
from getting lower than the mentioned values.
Likewise but not as obviously noticeable, a fully loaded system with no
processes waiting, shows a maximum 1/5/15 loadavg of 1.00, 0.99, 0.95
(multiplied by number of cores).
Once the (old) load becomes 93 or higher, it mathematically can never
get lower than 93, even when the active (load) remains 0 forever.
This results in the strange 0.00, 0.01, 0.05 uptime values on idle
systems. Note: 93/2048 = 0.0454..., which rounds up to 0.05.
It is not correct to add a 0.5 rounding (=1024/2048) here, since the
result from this function is fed back into the next iteration again,
so the result of that +0.5 rounding value then gets multiplied by
(2048-2037), and then rounded again, so there is a virtual "ghost"
load created, next to the old and active load terms.
By changing the way the internally kept value is rounded, that internal
value equivalent now can reach 0.00 on idle, and 1.00 on full load. Upon
increasing load, the internally kept load value is rounded up, when the
load is decreasing, the load value is rounded down.
The modified code was tested on nohz=off and nohz kernels. It was tested
on vanilla kernel 4.6-rc5 and on centos 7.1 kernel 3.10.0-327. It was
tested on single, dual, and octal cores system. It was tested on virtual
hosts and bare hardware. No unwanted effects have been observed, and the
problems that the patch intended to fix were indeed gone.
Tested-by: Damien Wyart <damien.wyart@free.fr>
Signed-off-by: Vik Heyndrickx <vik.heyndrickx@veribox.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Doug Smythies <dsmythies@telus.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0f004f5a696a ("sched: Cure more NO_HZ load average woes")
Link: http://lkml.kernel.org/r/e8d32bff-d544-7748-72b5-3c86cc71f09f@veribox.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/loadavg.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/kernel/sched/loadavg.c
+++ b/kernel/sched/loadavg.c
@@ -99,10 +99,13 @@ long calc_load_fold_active(struct rq *th
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
- load *= exp;
- load += active * (FIXED_1 - exp);
- load += 1UL << (FSHIFT - 1);
- return load >> FSHIFT;
+ unsigned long newload;
+
+ newload = load * exp + active * (FIXED_1 - exp);
+ if (active >= load)
+ newload += FIXED_1-1;
+
+ return newload / FIXED_1;
}
#ifdef CONFIG_NO_HZ_COMMON
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 23/87] mfd: omap-usb-tll: Fix scheduling while atomic BUG
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 22/87] sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 24/87] Input: pwm-beeper - fix - scheduling while atomic Greg Kroah-Hartman
` (57 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, H. Nikolaus Schaller, Roger Quadros,
Lee Jones
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roger Quadros <rogerq@ti.com>
commit b49b927f16acee626c56a1af4ab4cb062f75b5df upstream.
We shouldn't be calling clk_prepare_enable()/clk_prepare_disable()
in an atomic context.
Fixes the following issue:
[ 5.830970] ehci-omap: OMAP-EHCI Host Controller driver
[ 5.830974] driver_register 'ehci-omap'
[ 5.895849] driver_register 'wl1271_sdio'
[ 5.896870] BUG: scheduling while atomic: udevd/994/0x00000002
[ 5.896876] 4 locks held by udevd/994:
[ 5.896904] #0: (&dev->mutex){......}, at: [<c049597c>] __driver_attach+0x60/0xac
[ 5.896923] #1: (&dev->mutex){......}, at: [<c049598c>] __driver_attach+0x70/0xac
[ 5.896946] #2: (tll_lock){+.+...}, at: [<c04c2630>] omap_tll_enable+0x2c/0xd0
[ 5.896966] #3: (prepare_lock){+.+...}, at: [<c05ce9c8>] clk_prepare_lock+0x48/0xe0
[ 5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine
[ 5.897048] Preemption disabled at:[< (null)>] (null)
[ 5.897051]
[ 5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ #233
[ 5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree)
[ 5.897076] [<c010e714>] (unwind_backtrace) from [<c010af34>] (show_stack+0x10/0x14)
[ 5.897087] [<c010af34>] (show_stack) from [<c040aa7c>] (dump_stack+0x88/0xc0)
[ 5.897099] [<c040aa7c>] (dump_stack) from [<c020c558>] (__schedule_bug+0xac/0xd0)
[ 5.897111] [<c020c558>] (__schedule_bug) from [<c06f3d44>] (__schedule+0x88/0x7e4)
[ 5.897120] [<c06f3d44>] (__schedule) from [<c06f46d8>] (schedule+0x9c/0xc0)
[ 5.897129] [<c06f46d8>] (schedule) from [<c06f4904>] (schedule_preempt_disabled+0x14/0x20)
[ 5.897140] [<c06f4904>] (schedule_preempt_disabled) from [<c06f64e4>] (mutex_lock_nested+0x258/0x43c)
[ 5.897150] [<c06f64e4>] (mutex_lock_nested) from [<c05ce9c8>] (clk_prepare_lock+0x48/0xe0)
[ 5.897160] [<c05ce9c8>] (clk_prepare_lock) from [<c05d0e7c>] (clk_prepare+0x10/0x28)
[ 5.897169] [<c05d0e7c>] (clk_prepare) from [<c04c2668>] (omap_tll_enable+0x64/0xd0)
[ 5.897180] [<c04c2668>] (omap_tll_enable) from [<c04c1728>] (usbhs_runtime_resume+0x18/0x17c)
[ 5.897192] [<c04c1728>] (usbhs_runtime_resume) from [<c049d404>] (pm_generic_runtime_resume+0x2c/0x40)
[ 5.897202] [<c049d404>] (pm_generic_runtime_resume) from [<c049f180>] (__rpm_callback+0x38/0x68)
[ 5.897210] [<c049f180>] (__rpm_callback) from [<c049f220>] (rpm_callback+0x70/0x88)
[ 5.897218] [<c049f220>] (rpm_callback) from [<c04a0a00>] (rpm_resume+0x4ec/0x7ec)
[ 5.897227] [<c04a0a00>] (rpm_resume) from [<c04a0f48>] (__pm_runtime_resume+0x4c/0x64)
[ 5.897236] [<c04a0f48>] (__pm_runtime_resume) from [<c04958dc>] (driver_probe_device+0x30/0x70)
[ 5.897246] [<c04958dc>] (driver_probe_device) from [<c04959a4>] (__driver_attach+0x88/0xac)
[ 5.897256] [<c04959a4>] (__driver_attach) from [<c04940f8>] (bus_for_each_dev+0x50/0x84)
[ 5.897267] [<c04940f8>] (bus_for_each_dev) from [<c0494e40>] (bus_add_driver+0xcc/0x1e4)
[ 5.897276] [<c0494e40>] (bus_add_driver) from [<c0496914>] (driver_register+0xac/0xf4)
[ 5.897286] [<c0496914>] (driver_register) from [<c01018e0>] (do_one_initcall+0x100/0x1b8)
[ 5.897296] [<c01018e0>] (do_one_initcall) from [<c01c7a54>] (do_init_module+0x58/0x1c0)
[ 5.897304] [<c01c7a54>] (do_init_module) from [<c01c8a3c>] (SyS_finit_module+0x88/0x90)
[ 5.897313] [<c01c8a3c>] (SyS_finit_module) from [<c0107120>] (ret_fast_syscall+0x0/0x1c)
[ 5.912697] ------------[ cut here ]------------
[ 5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58
[ 5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count())
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mfd/omap-usb-tll.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -269,6 +269,8 @@ static int usbtll_omap_probe(struct plat
if (IS_ERR(tll->ch_clk[i]))
dev_dbg(dev, "can't get clock : %s\n", clkname);
+ else
+ clk_prepare(tll->ch_clk[i]);
}
pm_runtime_put_sync(dev);
@@ -301,9 +303,12 @@ static int usbtll_omap_remove(struct pla
tll_dev = NULL;
spin_unlock(&tll_lock);
- for (i = 0; i < tll->nch; i++)
- if (!IS_ERR(tll->ch_clk[i]))
+ for (i = 0; i < tll->nch; i++) {
+ if (!IS_ERR(tll->ch_clk[i])) {
+ clk_unprepare(tll->ch_clk[i]);
clk_put(tll->ch_clk[i]);
+ }
+ }
pm_runtime_disable(&pdev->dev);
return 0;
@@ -420,7 +425,7 @@ int omap_tll_enable(struct usbhs_omap_pl
if (IS_ERR(tll->ch_clk[i]))
continue;
- r = clk_prepare_enable(tll->ch_clk[i]);
+ r = clk_enable(tll->ch_clk[i]);
if (r) {
dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
@@ -448,7 +453,7 @@ int omap_tll_disable(struct usbhs_omap_p
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (!IS_ERR(tll->ch_clk[i]))
- clk_disable_unprepare(tll->ch_clk[i]);
+ clk_disable(tll->ch_clk[i]);
}
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 24/87] Input: pwm-beeper - fix - scheduling while atomic
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 23/87] mfd: omap-usb-tll: Fix scheduling while atomic BUG Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 25/87] irqchip/gic: Ensure ordering between read of INTACK and shared data Greg Kroah-Hartman
` (56 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Manfred Schlaegl, Dmitry Torokhov
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manfred Schlaegl <manfred.schlaegl@gmx.at>
commit f49cf3b8b4c841457244c461c66186a719e13bcc upstream.
Pwm config may sleep so defer it using a worker.
On a Freescale i.MX53 based board we ran into "BUG: scheduling while
atomic" because input_inject_event locks interrupts, but
imx_pwm_config_v2 sleeps.
Tested on Freescale i.MX53 SoC with 4.6.0.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/misc/pwm-beeper.c | 69 +++++++++++++++++++++++++++-------------
1 file changed, 48 insertions(+), 21 deletions(-)
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -20,21 +20,40 @@
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
struct pwm_beeper {
struct input_dev *input;
struct pwm_device *pwm;
+ struct work_struct work;
unsigned long period;
};
#define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
+static void __pwm_beeper_set(struct pwm_beeper *beeper)
+{
+ unsigned long period = beeper->period;
+
+ if (period) {
+ pwm_config(beeper->pwm, period / 2, period);
+ pwm_enable(beeper->pwm);
+ } else
+ pwm_disable(beeper->pwm);
+}
+
+static void pwm_beeper_work(struct work_struct *work)
+{
+ struct pwm_beeper *beeper =
+ container_of(work, struct pwm_beeper, work);
+
+ __pwm_beeper_set(beeper);
+}
+
static int pwm_beeper_event(struct input_dev *input,
unsigned int type, unsigned int code, int value)
{
- int ret = 0;
struct pwm_beeper *beeper = input_get_drvdata(input);
- unsigned long period;
if (type != EV_SND || value < 0)
return -EINVAL;
@@ -49,22 +68,31 @@ static int pwm_beeper_event(struct input
return -EINVAL;
}
- if (value == 0) {
- pwm_disable(beeper->pwm);
- } else {
- period = HZ_TO_NANOSECONDS(value);
- ret = pwm_config(beeper->pwm, period / 2, period);
- if (ret)
- return ret;
- ret = pwm_enable(beeper->pwm);
- if (ret)
- return ret;
- beeper->period = period;
- }
+ if (value == 0)
+ beeper->period = 0;
+ else
+ beeper->period = HZ_TO_NANOSECONDS(value);
+
+ schedule_work(&beeper->work);
return 0;
}
+static void pwm_beeper_stop(struct pwm_beeper *beeper)
+{
+ cancel_work_sync(&beeper->work);
+
+ if (beeper->period)
+ pwm_disable(beeper->pwm);
+}
+
+static void pwm_beeper_close(struct input_dev *input)
+{
+ struct pwm_beeper *beeper = input_get_drvdata(input);
+
+ pwm_beeper_stop(beeper);
+}
+
static int pwm_beeper_probe(struct platform_device *pdev)
{
unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
@@ -87,6 +115,8 @@ static int pwm_beeper_probe(struct platf
goto err_free;
}
+ INIT_WORK(&beeper->work, pwm_beeper_work);
+
beeper->input = input_allocate_device();
if (!beeper->input) {
dev_err(&pdev->dev, "Failed to allocate input device\n");
@@ -106,6 +136,7 @@ static int pwm_beeper_probe(struct platf
beeper->input->sndbit[0] = BIT(SND_TONE) | BIT(SND_BELL);
beeper->input->event = pwm_beeper_event;
+ beeper->input->close = pwm_beeper_close;
input_set_drvdata(beeper->input, beeper);
@@ -135,7 +166,6 @@ static int pwm_beeper_remove(struct plat
input_unregister_device(beeper->input);
- pwm_disable(beeper->pwm);
pwm_free(beeper->pwm);
kfree(beeper);
@@ -147,8 +177,7 @@ static int __maybe_unused pwm_beeper_sus
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
- if (beeper->period)
- pwm_disable(beeper->pwm);
+ pwm_beeper_stop(beeper);
return 0;
}
@@ -157,10 +186,8 @@ static int __maybe_unused pwm_beeper_res
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
- if (beeper->period) {
- pwm_config(beeper->pwm, beeper->period / 2, beeper->period);
- pwm_enable(beeper->pwm);
- }
+ if (beeper->period)
+ __pwm_beeper_set(beeper);
return 0;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 25/87] irqchip/gic: Ensure ordering between read of INTACK and shared data
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 24/87] Input: pwm-beeper - fix - scheduling while atomic Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 26/87] irqchip/gic-v3: Configure all interrupts as non-secure Group-1 Greg Kroah-Hartman
` (55 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Will Deacon, Marc Zyngier
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <will.deacon@arm.com>
commit f86c4fbd930ff6fecf3d8a1c313182bd0f49f496 upstream.
When an IPI is generated by a CPU, the pattern looks roughly like:
<write shared data>
smp_wmb();
<write to GIC to signal SGI>
On the receiving CPU we rely on the fact that, once we've taken the
interrupt, then the freshly written shared data must be visible to us.
Put another way, the CPU isn't going to speculate taking an interrupt.
Unfortunately, this assumption turns out to be broken.
Consider that CPUx wants to send an IPI to CPUy, which will cause CPUy
to read some shared_data. Before CPUx has done anything, a random
peripheral raises an IRQ to the GIC and the IRQ line on CPUy is raised.
CPUy then takes the IRQ and starts executing the entry code, heading
towards gic_handle_irq. Furthermore, let's assume that a bunch of the
previous interrupts handled by CPUy were SGIs, so the branch predictor
kicks in and speculates that irqnr will be <16 and we're likely to
head into handle_IPI. The prefetcher then grabs a speculative copy of
shared_data which contains a stale value.
Meanwhile, CPUx gets round to updating shared_data and asking the GIC
to send an SGI to CPUy. Internally, the GIC decides that the SGI is
more important than the peripheral interrupt (which hasn't yet been
ACKed) but doesn't need to do anything to CPUy, because the IRQ line
is already raised.
CPUy then reads the ACK register on the GIC, sees the SGI value which
confirms the branch prediction and we end up with a stale shared_data
value.
This patch fixes the problem by adding an smp_rmb() to the IPI entry
code in gic_handle_irq. As it turns out, the combination of a control
dependency and an ISB instruction from the EOI in the GICv3 driver is
enough to provide the ordering we need, so we add a comment there
justifying the absence of an explicit smp_rmb().
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-gic-v3.c | 7 +++++++
drivers/irqchip/irq-gic.c | 8 ++++++++
2 files changed, 15 insertions(+)
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -361,6 +361,13 @@ static asmlinkage void __exception_irq_e
if (static_key_true(&supports_deactivate))
gic_write_dir(irqnr);
#ifdef CONFIG_SMP
+ /*
+ * Unlike GICv2, we don't need an smp_rmb() here.
+ * The control dependency from gic_read_iar to
+ * the ISB in gic_write_eoir is enough to ensure
+ * that any shared data read by handle_IPI will
+ * be read after the ACK.
+ */
handle_IPI(irqnr, regs);
#else
WARN_ONCE(true, "Unexpected SGI received!\n");
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -344,6 +344,14 @@ static void __exception_irq_entry gic_ha
if (static_key_true(&supports_deactivate))
writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE);
#ifdef CONFIG_SMP
+ /*
+ * Ensure any shared data written by the CPU sending
+ * the IPI is read after we've read the ACK register
+ * on the GIC.
+ *
+ * Pairs with the write barrier in gic_raise_softirq
+ */
+ smp_rmb();
handle_IPI(irqnr, regs);
#endif
continue;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 26/87] irqchip/gic-v3: Configure all interrupts as non-secure Group-1
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 25/87] irqchip/gic: Ensure ordering between read of INTACK and shared data Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 27/87] nfc: st21nfca: Fix static checker warning Greg Kroah-Hartman
` (54 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Peter Maydell, Marc Zyngier
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier <marc.zyngier@arm.com>
commit 7c9b973061b03af62734f613f6abec46c0dd4a88 upstream.
The GICv3 driver wrongly assumes that it runs on the non-secure
side of a secure-enabled system, while it could be on a system
with a single security state, or a GICv3 with GICD_CTLR.DS set.
Either way, it is important to configure this properly, or
interrupts will simply not be delivered on this HW.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-gic-v3.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -387,6 +387,15 @@ static void __init gic_dist_init(void)
writel_relaxed(0, base + GICD_CTLR);
gic_dist_wait_for_rwp();
+ /*
+ * Configure SPIs as non-secure Group-1. This will only matter
+ * if the GIC only has a single security state. This will not
+ * do the right thing if the kernel is running in secure mode,
+ * but that's not the intended use case anyway.
+ */
+ for (i = 32; i < gic_data.irq_nr; i += 32)
+ writel_relaxed(~0, base + GICD_IGROUPR + i / 8);
+
gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
/* Enable distributor with ARE, Group1 */
@@ -501,6 +510,9 @@ static void gic_cpu_init(void)
rbase = gic_data_rdist_sgi_base();
+ /* Configure SGIs/PPIs as non-secure Group-1 */
+ writel_relaxed(~0, rbase + GICR_IGROUPR0);
+
gic_cpu_config(rbase, gic_redist_wait_for_rwp);
/* Give LPIs a spin */
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 27/87] nfc: st21nfca: Fix static checker warning
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 26/87] irqchip/gic-v3: Configure all interrupts as non-secure Group-1 Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 28/87] can: fix handling of unmodifiable configuration options Greg Kroah-Hartman
` (53 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Christophe Ricard,
Samuel Ortiz
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christophe Ricard <christophe.ricard@gmail.com>
commit b58afe6d6d3a53af165d5946f12c4b08c95acd58 upstream.
Fix static checker warning:
drivers/nfc/st21nfca/i2c.c:530 st21nfca_hci_i2c_acpi_request_resources()
error: 'gpiod_ena' dereferencing possible ERR_PTR()
Fix so that if no enable gpio can be retrieved an -ENODEV is returned.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: dfa8070d7f64 ("nfc: st21nfca: Add support for acpi probing for i2c device.")
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/st21nfca/i2c.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -524,8 +524,10 @@ static int st21nfca_hci_i2c_acpi_request
/* Get EN GPIO from ACPI */
gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1,
GPIOD_OUT_LOW);
- if (!IS_ERR(gpiod_ena))
- phy->gpio_ena = desc_to_gpio(gpiod_ena);
+ if (!IS_ERR(gpiod_ena)) {
+ nfc_err(dev, "Unable to get ENABLE GPIO\n");
+ return -ENODEV;
+ }
phy->gpio_ena = desc_to_gpio(gpiod_ena);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 28/87] can: fix handling of unmodifiable configuration options
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 27/87] nfc: st21nfca: Fix static checker warning Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 29/87] mmc: mmc: Fix partition switch timeout for some eMMCs Greg Kroah-Hartman
` (52 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ramesh Shanmugasundaram,
Oliver Hartkopp, Marc Kleine-Budde
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Hartkopp <socketcan@hartkopp.net>
commit bb208f144cf3f59d8f89a09a80efd04389718907 upstream.
As described in 'can: m_can: tag current CAN FD controllers as non-ISO'
(6cfda7fbebe) it is possible to define fixed configuration options by
setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'.
This leads to the incovenience that the fixed configuration bits can not be
passed by netlink even when they have the correct values (e.g. non-ISO, FD).
This patch fixes that issue and not only allows fixed set bit values to be set
again but now requires(!) to provide these fixed values at configuration time.
A valid CAN FD configuration consists of a nominal/arbitration bittiming, a
data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now
enforced by a new can_validate() function. This fix additionally removed the
inconsistency that was prohibiting the support of 'CANFD-only' controller
drivers, like the RCar CAN FD.
For this reason a new helper can_set_static_ctrlmode() has been introduced to
provide a proper interface to handle static enabled CAN controller options.
Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/dev.c | 56 +++++++++++++++++++++++++++++++++++++++---
drivers/net/can/m_can/m_can.c | 2 -
include/linux/can/dev.h | 22 +++++++++++++++-
3 files changed, 73 insertions(+), 7 deletions(-)
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -696,11 +696,17 @@ int can_change_mtu(struct net_device *de
/* allow change of MTU according to the CANFD ability of the device */
switch (new_mtu) {
case CAN_MTU:
+ /* 'CANFD-only' controllers can not switch to CAN_MTU */
+ if (priv->ctrlmode_static & CAN_CTRLMODE_FD)
+ return -EINVAL;
+
priv->ctrlmode &= ~CAN_CTRLMODE_FD;
break;
case CANFD_MTU:
- if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD))
+ /* check for potential CANFD ability */
+ if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) &&
+ !(priv->ctrlmode_static & CAN_CTRLMODE_FD))
return -EINVAL;
priv->ctrlmode |= CAN_CTRLMODE_FD;
@@ -782,6 +788,35 @@ static const struct nla_policy can_polic
= { .len = sizeof(struct can_bittiming_const) },
};
+static int can_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+ bool is_can_fd = false;
+
+ /* Make sure that valid CAN FD configurations always consist of
+ * - nominal/arbitration bittiming
+ * - data bittiming
+ * - control mode with CAN_CTRLMODE_FD set
+ */
+
+ if (data[IFLA_CAN_CTRLMODE]) {
+ struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+
+ is_can_fd = cm->flags & cm->mask & CAN_CTRLMODE_FD;
+ }
+
+ if (is_can_fd) {
+ if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
+ return -EOPNOTSUPP;
+ }
+
+ if (data[IFLA_CAN_DATA_BITTIMING]) {
+ if (!is_can_fd || !data[IFLA_CAN_BITTIMING])
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
static int can_changelink(struct net_device *dev,
struct nlattr *tb[], struct nlattr *data[])
{
@@ -813,19 +848,31 @@ static int can_changelink(struct net_dev
if (data[IFLA_CAN_CTRLMODE]) {
struct can_ctrlmode *cm;
+ u32 ctrlstatic;
+ u32 maskedflags;
/* Do not allow changing controller mode while running */
if (dev->flags & IFF_UP)
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
+ ctrlstatic = priv->ctrlmode_static;
+ maskedflags = cm->flags & cm->mask;
+
+ /* check whether provided bits are allowed to be passed */
+ if (cm->mask & ~(priv->ctrlmode_supported | ctrlstatic))
+ return -EOPNOTSUPP;
+
+ /* do not check for static fd-non-iso if 'fd' is disabled */
+ if (!(maskedflags & CAN_CTRLMODE_FD))
+ ctrlstatic &= ~CAN_CTRLMODE_FD_NON_ISO;
- /* check whether changed bits are allowed to be modified */
- if (cm->mask & ~priv->ctrlmode_supported)
+ /* make sure static options are provided by configuration */
+ if ((maskedflags & ctrlstatic) != ctrlstatic)
return -EOPNOTSUPP;
/* clear bits to be modified and copy the flag values */
priv->ctrlmode &= ~cm->mask;
- priv->ctrlmode |= (cm->flags & cm->mask);
+ priv->ctrlmode |= maskedflags;
/* CAN_CTRLMODE_FD can only be set when driver supports FD */
if (priv->ctrlmode & CAN_CTRLMODE_FD)
@@ -966,6 +1013,7 @@ static struct rtnl_link_ops can_link_ops
.maxtype = IFLA_CAN_MAX,
.policy = can_policy,
.setup = can_setup,
+ .validate = can_validate,
.newlink = can_newlink,
.changelink = can_changelink,
.get_size = can_get_size,
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -955,7 +955,7 @@ static struct net_device *alloc_m_can_de
priv->can.do_get_berr_counter = m_can_get_berr_counter;
/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
- priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+ can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
/* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -40,8 +40,11 @@ struct can_priv {
struct can_clock clock;
enum can_state state;
- u32 ctrlmode;
- u32 ctrlmode_supported;
+
+ /* CAN controller features - see include/uapi/linux/can/netlink.h */
+ u32 ctrlmode; /* current options setting */
+ u32 ctrlmode_supported; /* options that can be modified by netlink */
+ u32 ctrlmode_static; /* static enabled options for driver/hardware */
int restart_ms;
struct timer_list restart_timer;
@@ -108,6 +111,21 @@ static inline bool can_is_canfd_skb(cons
return skb->len == CANFD_MTU;
}
+/* helper to define static CAN controller features at device creation time */
+static inline void can_set_static_ctrlmode(struct net_device *dev,
+ u32 static_mode)
+{
+ struct can_priv *priv = netdev_priv(dev);
+
+ /* alloc_candev() succeeded => netdev_priv() is valid at this point */
+ priv->ctrlmode = static_mode;
+ priv->ctrlmode_static = static_mode;
+
+ /* override MTU which was set by default in can_setup()? */
+ if (static_mode & CAN_CTRLMODE_FD)
+ dev->mtu = CANFD_MTU;
+}
+
/* get data length from can_dlc with sanitized can_dlc */
u8 can_dlc2len(u8 can_dlc);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 29/87] mmc: mmc: Fix partition switch timeout for some eMMCs
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 28/87] can: fix handling of unmodifiable configuration options Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 30/87] ACPI / PM: Export acpi_device_fix_up_power() Greg Kroah-Hartman
` (51 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Ulf Hansson
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <adrian.hunter@intel.com>
commit 1c447116d017a98c90f8f71c8c5a611e0aa42178 upstream.
Some eMMCs set the partition switch timeout too low.
Now typically eMMCs are considered a critical component (e.g. because
they store the root file system) and consequently are expected to be
reliable. Thus we can neglect the use case where eMMCs can't switch
reliably and we might want a lower timeout to facilitate speedy
recovery.
Although we could employ a quirk for the cards that are affected (if
we could identify them all), as described above, there is little
benefit to having a low timeout, so instead simply set a minimum
timeout.
The minimum is set to 300ms somewhat arbitrarily - the examples that
have been seen had a timeout of 10ms but were sometimes taking 60-70ms.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/core/mmc.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -333,6 +333,9 @@ static void mmc_manage_gp_partitions(str
}
}
+/* Minimum partition switch timeout in milliseconds */
+#define MMC_MIN_PART_SWITCH_TIME 300
+
/*
* Decode extended CSD.
*/
@@ -397,6 +400,10 @@ static int mmc_decode_ext_csd(struct mmc
/* EXT_CSD value is in units of 10ms, but we store in ms */
card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
+ /* Some eMMC set the value too low so set a minimum */
+ if (card->ext_csd.part_time &&
+ card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME)
+ card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
/* Sleep / awake timeout in 100ns units */
if (sa_shift > 0 && sa_shift <= 0x17)
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 30/87] ACPI / PM: Export acpi_device_fix_up_power()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 29/87] mmc: mmc: Fix partition switch timeout for some eMMCs Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 31/87] mmc: sdhci-acpi: Ensure connected devices are powered when probing Greg Kroah-Hartman
` (50 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Laszlo Fiat, Ulf Hansson, Rafael J. Wysocki
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Hansson <ulf.hansson@linaro.org>
commit 78a898d0e39513469858de990de83210fee28ee9 upstream.
Drivers that needs acpi_device_fix_up_power(), allow them to be built as
modules by exporting this function.
Tested-by: Laszlo Fiat <laszlo.fiat@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/device_pm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -319,6 +319,7 @@ int acpi_device_fix_up_power(struct acpi
return ret;
}
+EXPORT_SYMBOL_GPL(acpi_device_fix_up_power);
int acpi_device_update_power(struct acpi_device *device, int *state_p)
{
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 31/87] mmc: sdhci-acpi: Ensure connected devices are powered when probing
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 30/87] ACPI / PM: Export acpi_device_fix_up_power() Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 32/87] mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers Greg Kroah-Hartman
` (49 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Ulf Hansson, Laszlo Fiat
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <adrian.hunter@intel.com>
commit e5bbf30733f930a1d17b4ccf19eac88e30a39cc7 upstream.
Some devices connected to the SDHCI controller may have separate enabling
lines that are controlled through GPIO. These devices need to be powered
on and enabled before probing. This is to ensure all devices connected can
be seen by the controller.
Note, for "stable" this patch depends on the following change:
commit 78a898d0e395 ("ACPI / PM: Export acpi_device_fix_up_power()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-and-tested-by: Laszlo Fiat <laszlo.fiat@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reported-by: Laszlo Fiat <laszlo.fiat@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112571
Link: http://lkml.kernel.org/r/CA+7w51inLtQSr656bJvOjGG9oQWKYPXH+xxDPJKbeJ=CcrkS9Q@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-acpi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -396,7 +396,7 @@ static int sdhci_acpi_probe(struct platf
{
struct device *dev = &pdev->dev;
acpi_handle handle = ACPI_HANDLE(dev);
- struct acpi_device *device;
+ struct acpi_device *device, *child;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
@@ -408,6 +408,11 @@ static int sdhci_acpi_probe(struct platf
if (acpi_bus_get_device(handle, &device))
return -ENODEV;
+ /* Power on the SDHCI controller and its children */
+ acpi_device_fix_up_power(device);
+ list_for_each_entry(child, &device->children, node)
+ acpi_device_fix_up_power(child);
+
if (acpi_bus_get_status(device) || !device->status.present)
return -ENODEV;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 32/87] mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 31/87] mmc: sdhci-acpi: Ensure connected devices are powered when probing Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 33/87] ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings Greg Kroah-Hartman
` (48 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Ulf Hansson
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <adrian.hunter@intel.com>
commit 265984b36ce82fec67957d452dd2b22e010611e4 upstream.
The CMD19/CMD14 bus width test has been found to be unreliable in
some cases. It is not essential, so simply remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-acpi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -307,7 +307,7 @@ static const struct sdhci_acpi_slot sdhc
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
@@ -322,7 +322,7 @@ static const struct sdhci_acpi_slot sdhc
SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
@@ -334,7 +334,7 @@ static const struct sdhci_acpi_slot sdhc
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
- .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
+ .caps = MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 33/87] ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 32/87] mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 35/87] mmc: longer timeout for long read time quirk Greg Kroah-Hartman
` (47 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Chen Yu, Lv Zheng,
Rafael J. Wysocki
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lv Zheng <lv.zheng@intel.com>
commit 30c9bb0d7603e7b3f4d6a0ea231e1cddae020c32 upstream.
The order of the _OSI related functionalities is as follows:
acpi_blacklisted()
acpi_dmi_osi_linux()
acpi_osi_setup()
acpi_osi_setup()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
parse_args()
__setup("acpi_osi=")
acpi_osi_setup_linux()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
acpi_early_init()
acpi_initialize_subsystem()
acpi_ut_initialize_interfaces()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
acpi_bus_init()
acpi_os_initialize1()
acpi_install_interface_handler(acpi_osi_handler)
acpi_osi_setup_late()
acpi_update_interfaces() for "!"
>>>>>>>>>>>>>>>>>>>>>>>>
acpi_osi_handler()
Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").
Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.
This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".
Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.
Fixes: 741d81280ad2 (ACPI: Add facility to remove all _OSI strings)
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/osl.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -135,7 +135,7 @@ static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
- unsigned int default_disabling:1;
+ u8 default_disabling;
} osi_linux = {0, 0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
@@ -1713,10 +1713,13 @@ void __init acpi_osi_setup(char *str)
if (*str == '!') {
str++;
if (*str == '\0') {
- osi_linux.default_disabling = 1;
+ /* Do not override acpi_osi=!* */
+ if (!osi_linux.default_disabling)
+ osi_linux.default_disabling =
+ ACPI_DISABLE_ALL_VENDOR_STRINGS;
return;
} else if (*str == '*') {
- acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS);
+ osi_linux.default_disabling = ACPI_DISABLE_ALL_STRINGS;
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
osi = &osi_setup_entries[i];
osi->enable = false;
@@ -1789,10 +1792,13 @@ static void __init acpi_osi_setup_late(v
acpi_status status;
if (osi_linux.default_disabling) {
- status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
+ status = acpi_update_interfaces(osi_linux.default_disabling);
if (ACPI_SUCCESS(status))
- printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n");
+ printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors%s\n",
+ osi_linux.default_disabling ==
+ ACPI_DISABLE_ALL_STRINGS ?
+ " and feature groups" : "");
}
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 35/87] mmc: longer timeout for long read time quirk
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 33/87] ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 36/87] mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers Greg Kroah-Hartman
` (46 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matt Gumbel, Adrian Hunter, Ulf Hansson
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matt Gumbel <matthew.k.gumbel@intel.com>
commit 32ecd320db39bcb007679ed42f283740641b81ea upstream.
008GE0 Toshiba mmc in some Intel Baytrail tablets responds to
MMC_SEND_EXT_CSD in 450-600ms.
This patch will...
() Increase the long read time quirk timeout from 300ms to 600ms. Original
author of that quirk says 300ms was only a guess and that the number
may need to be raised in the future.
() Add this specific MMC to the quirk
Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/card/block.c | 5 +++--
drivers/mmc/core/core.c | 4 ++--
2 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2494,11 +2494,12 @@ static const struct mmc_fixup blk_fixups
MMC_QUIRK_BLK_NO_CMD23),
/*
- * Some Micron MMC cards needs longer data read timeout than
- * indicated in CSD.
+ * Some MMC cards need longer data read timeout than indicated in CSD.
*/
MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
MMC_QUIRK_LONG_READ_TIME),
+ MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
/*
* On these Samsung MoviNAND parts, performing secure erase or
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -868,11 +868,11 @@ void mmc_set_data_timeout(struct mmc_dat
/*
* Some cards require longer data read timeout than indicated in CSD.
* Address this by setting the read timeout to a "reasonably high"
- * value. For the cards tested, 300ms has proven enough. If necessary,
+ * value. For the cards tested, 600ms has proven enough. If necessary,
* this value can be increased if other problematic cards require this.
*/
if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
- data->timeout_ns = 300000000;
+ data->timeout_ns = 600000000;
data->timeout_clks = 0;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 36/87] mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 35/87] mmc: longer timeout for long read time quirk Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 37/87] Bluetooth: vhci: fix open_timeout vs. hdev race Greg Kroah-Hartman
` (45 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Ulf Hansson
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <adrian.hunter@intel.com>
commit 822969369482166050c5b2f7013501505e025c39 upstream.
The CMD19/CMD14 bus width test has been found to be unreliable in
some cases. It is not essential, so simply remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-pci-core.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -361,7 +361,6 @@ static int byt_emmc_probe_slot(struct sd
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
@@ -377,15 +376,13 @@ static int byt_emmc_probe_slot(struct sd
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
- MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
- MMC_CAP_WAIT_WHILE_BUSY;
+ slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 37/87] Bluetooth: vhci: fix open_timeout vs. hdev race
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 36/87] mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 38/87] Bluetooth: vhci: purge unhandled skbs Greg Kroah-Hartman
` (44 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Marcel Holtmann, Dmitry Vyukov
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Slaby <jslaby@suse.cz>
commit 373a32c848ae3a1c03618517cce85f9211a6facf upstream.
Both vhci_get_user and vhci_release race with open_timeout work. They
both contain cancel_delayed_work_sync, but do not test whether the
work actually created hdev or not. Since the work can be in progress
and _sync will wait for finishing it, we can have data->hdev allocated
when cancel_delayed_work_sync returns. But the call sites do 'if
(data->hdev)' *before* cancel_delayed_work_sync.
As a result:
* vhci_get_user allocates a second hdev and puts it into
data->hdev. The former is leaked.
* vhci_release does not release data->hdev properly as it thinks there
is none.
Fix both cases by moving the actual test *after* the call to
cancel_delayed_work_sync.
This can be hit by this program:
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
int main(int argc, char **argv)
{
int fd;
srand(time(NULL));
while (1) {
const int delta = (rand() % 200 - 100) * 100;
fd = open("/dev/vhci", O_RDWR);
if (fd < 0)
err(1, "open");
usleep(1000000 + delta);
close(fd);
}
return 0;
}
And the result is:
BUG: KASAN: use-after-free in skb_queue_tail+0x13e/0x150 at addr ffff88006b0c1228
Read of size 8 by task kworker/u13:1/32068
=============================================================================
BUG kmalloc-192 (Tainted: G E ): kasan: bad access detected
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in vhci_open+0x50/0x330 [hci_vhci] age=260 cpu=3 pid=32040
...
kmem_cache_alloc_trace+0x150/0x190
vhci_open+0x50/0x330 [hci_vhci]
misc_open+0x35b/0x4e0
chrdev_open+0x23b/0x510
...
INFO: Freed in vhci_release+0xa4/0xd0 [hci_vhci] age=9 cpu=2 pid=32040
...
__slab_free+0x204/0x310
vhci_release+0xa4/0xd0 [hci_vhci]
...
INFO: Slab 0xffffea0001ac3000 objects=16 used=13 fp=0xffff88006b0c1e00 flags=0x5fffff80004080
INFO: Object 0xffff88006b0c1200 @offset=4608 fp=0xffff88006b0c0600
Bytes b4 ffff88006b0c11f0: 09 df 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
Object ffff88006b0c1200: 00 06 0c 6b 00 88 ff ff 00 00 00 00 00 00 00 00 ...k............
Object ffff88006b0c1210: 10 12 0c 6b 00 88 ff ff 10 12 0c 6b 00 88 ff ff ...k.......k....
Object ffff88006b0c1220: c0 46 c2 6b 00 88 ff ff c0 46 c2 6b 00 88 ff ff .F.k.....F.k....
Object ffff88006b0c1230: 01 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 ................
Object ffff88006b0c1240: 40 12 0c 6b 00 88 ff ff 40 12 0c 6b 00 88 ff ff @..k....@..k....
Object ffff88006b0c1250: 50 0d 6e a0 ff ff ff ff 00 02 00 00 00 00 ad de P.n.............
Object ffff88006b0c1260: 00 00 00 00 00 00 00 00 ab 62 02 00 01 00 00 00 .........b......
Object ffff88006b0c1270: 90 b9 19 81 ff ff ff ff 38 12 0c 6b 00 88 ff ff ........8..k....
Object ffff88006b0c1280: 03 00 20 00 ff ff ff ff ff ff ff ff 00 00 00 00 .. .............
Object ffff88006b0c1290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Object ffff88006b0c12a0: 00 00 00 00 00 00 00 00 00 80 cd 3d 00 88 ff ff ...........=....
Object ffff88006b0c12b0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 . ..............
Redzone ffff88006b0c12c0: bb bb bb bb bb bb bb bb ........
Padding ffff88006b0c13f8: 00 00 00 00 00 00 00 00 ........
CPU: 3 PID: 32068 Comm: kworker/u13:1 Tainted: G B E 4.4.6-0-default #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014
Workqueue: hci0 hci_cmd_work [bluetooth]
00000000ffffffff ffffffff81926cfa ffff88006be37c68 ffff88006bc27180
ffff88006b0c1200 ffff88006b0c1234 ffffffff81577993 ffffffff82489320
ffff88006bc24240 0000000000000046 ffff88006a100000 000000026e51eb80
Call Trace:
...
[<ffffffff81ec8ebe>] ? skb_queue_tail+0x13e/0x150
[<ffffffffa06e027c>] ? vhci_send_frame+0xac/0x100 [hci_vhci]
[<ffffffffa0c61268>] ? hci_send_frame+0x188/0x320 [bluetooth]
[<ffffffffa0c61515>] ? hci_cmd_work+0x115/0x310 [bluetooth]
[<ffffffff811a1375>] ? process_one_work+0x815/0x1340
[<ffffffff811a1f85>] ? worker_thread+0xe5/0x11f0
[<ffffffff811a1ea0>] ? process_one_work+0x1340/0x1340
[<ffffffff811b3c68>] ? kthread+0x1c8/0x230
...
Memory state around the buggy address:
ffff88006b0c1100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88006b0c1180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88006b0c1200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88006b0c1280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88006b0c1300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 23424c0d31 (Bluetooth: Add support creating virtual AMP controllers)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/hci_vhci.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -189,13 +189,13 @@ static inline ssize_t vhci_get_user(stru
break;
case HCI_VENDOR_PKT:
+ cancel_delayed_work_sync(&data->open_timeout);
+
if (data->hdev) {
kfree_skb(skb);
return -EBADFD;
}
- cancel_delayed_work_sync(&data->open_timeout);
-
opcode = *((__u8 *) skb->data);
skb_pull(skb, 1);
@@ -333,10 +333,12 @@ static int vhci_open(struct inode *inode
static int vhci_release(struct inode *inode, struct file *file)
{
struct vhci_data *data = file->private_data;
- struct hci_dev *hdev = data->hdev;
+ struct hci_dev *hdev;
cancel_delayed_work_sync(&data->open_timeout);
+ hdev = data->hdev;
+
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 38/87] Bluetooth: vhci: purge unhandled skbs
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 37/87] Bluetooth: vhci: fix open_timeout vs. hdev race Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 39/87] Bluetooth: vhci: Fix race at creating hci device Greg Kroah-Hartman
` (43 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Marcel Holtmann
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Slaby <jslaby@suse.cz>
commit 13407376b255325fa817798800117a839f3aa055 upstream.
The write handler allocates skbs and queues them into data->readq.
Read side should read them, if there is any. If there is none, skbs
should be dropped by hdev->flush. But this happens only if the device
is HCI_UP, i.e. hdev->power_on work was triggered already. When it was
not, skbs stay allocated in the queue when /dev/vhci is closed. So
purge the queue in ->release.
Program to reproduce:
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/uio.h>
int main()
{
char buf[] = { 0xff, 0 };
struct iovec iov = {
.iov_base = buf,
.iov_len = sizeof(buf),
};
int fd;
while (1) {
fd = open("/dev/vhci", O_RDWR);
if (fd < 0)
err(1, "open");
usleep(50);
if (writev(fd, &iov, 1) < 0)
err(1, "writev");
usleep(50);
close(fd);
}
return 0;
}
Result:
kmemleak: 4609 new suspected memory leaks
unreferenced object 0xffff88059f4d5440 (size 232):
comm "vhci", pid 1084, jiffies 4294912542 (age 37569.296s)
hex dump (first 32 bytes):
20 f0 23 87 05 88 ff ff 20 f0 23 87 05 88 ff ff .#..... .#.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
...
[<ffffffff81ece010>] __alloc_skb+0x0/0x5a0
[<ffffffffa021886c>] vhci_create_device+0x5c/0x580 [hci_vhci]
[<ffffffffa0219436>] vhci_write+0x306/0x4c8 [hci_vhci]
Fixes: 23424c0d31 (Bluetooth: Add support creating virtual AMP controllers)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/hci_vhci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -344,6 +344,7 @@ static int vhci_release(struct inode *in
hci_free_dev(hdev);
}
+ skb_queue_purge(&data->readq);
file->private_data = NULL;
kfree(data);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 39/87] Bluetooth: vhci: Fix race at creating hci device
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 38/87] Bluetooth: vhci: purge unhandled skbs Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 40/87] mei: fix NULL dereferencing during FW initiated disconnection Greg Kroah-Hartman
` (42 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Marcel Holtmann
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit c7c999cb18da88a881e10e07f0724ad0bfaff770 upstream.
hci_vhci driver creates a hci device object dynamically upon each
HCI_VENDOR_PKT write. Although it checks the already created object
and returns an error, it's still racy and may build multiple hci_dev
objects concurrently when parallel writes are performed, as the device
tracks only a single hci_dev object.
This patch introduces a mutex to protect against the concurrent device
creations.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/hci_vhci.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -50,6 +50,7 @@ struct vhci_data {
wait_queue_head_t read_wait;
struct sk_buff_head readq;
+ struct mutex open_mutex;
struct delayed_work open_timeout;
};
@@ -87,12 +88,15 @@ static int vhci_send_frame(struct hci_de
return 0;
}
-static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
{
struct hci_dev *hdev;
struct sk_buff *skb;
__u8 dev_type;
+ if (data->hdev)
+ return -EBADFD;
+
/* bits 0-1 are dev_type (BR/EDR or AMP) */
dev_type = opcode & 0x03;
@@ -151,6 +155,17 @@ static int vhci_create_device(struct vhc
return 0;
}
+static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+{
+ int err;
+
+ mutex_lock(&data->open_mutex);
+ err = __vhci_create_device(data, opcode);
+ mutex_unlock(&data->open_mutex);
+
+ return err;
+}
+
static inline ssize_t vhci_get_user(struct vhci_data *data,
struct iov_iter *from)
{
@@ -191,11 +206,6 @@ static inline ssize_t vhci_get_user(stru
case HCI_VENDOR_PKT:
cancel_delayed_work_sync(&data->open_timeout);
- if (data->hdev) {
- kfree_skb(skb);
- return -EBADFD;
- }
-
opcode = *((__u8 *) skb->data);
skb_pull(skb, 1);
@@ -320,6 +330,7 @@ static int vhci_open(struct inode *inode
skb_queue_head_init(&data->readq);
init_waitqueue_head(&data->read_wait);
+ mutex_init(&data->open_mutex);
INIT_DELAYED_WORK(&data->open_timeout, vhci_open_timeout);
file->private_data = data;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 40/87] mei: fix NULL dereferencing during FW initiated disconnection
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 39/87] Bluetooth: vhci: Fix race at creating hci device Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 41/87] mei: amthif: discard not read messages Greg Kroah-Hartman
` (41 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Usyskin, Tomas Winkler
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit 6a8d648c8d1824117a9e9edb948ed1611fb013c0 upstream.
In the case when disconnection is initiated from the FW
the driver is flushing items from the write control list while
iterating over it:
mei_irq_write_handler()
list_for_each_entry_safe(ctrl_wr_list) <-- outer loop
mei_cl_irq_disconnect_rsp()
mei_cl_set_disconnected()
mei_io_list_flush(ctrl_wr_list) <-- destorying list
We move the list flushing to the completion routine.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/client.c | 4 ++++
drivers/misc/mei/hbm.c | 3 +--
drivers/misc/mei/interrupt.c | 5 +----
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1735,6 +1735,10 @@ void mei_cl_complete(struct mei_cl *cl,
wake_up(&cl->wait);
break;
+ case MEI_FOP_DISCONNECT_RSP:
+ mei_io_cb_free(cb);
+ mei_cl_set_disconnected(cl);
+ break;
default:
BUG_ON(0);
}
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -873,8 +873,7 @@ static int mei_hbm_fw_disconnect_req(str
cb = mei_io_cb_init(cl, MEI_FOP_DISCONNECT_RSP, NULL);
if (!cb)
return -ENOMEM;
- cl_dbg(dev, cl, "add disconnect response as first\n");
- list_add(&cb->list, &dev->ctrl_wr_list.list);
+ list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
}
return 0;
}
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -184,10 +184,7 @@ static int mei_cl_irq_disconnect_rsp(str
return -EMSGSIZE;
ret = mei_hbm_cl_disconnect_rsp(dev, cl);
- mei_cl_set_disconnected(cl);
- mei_io_cb_free(cb);
- mei_me_cl_put(cl->me_cl);
- cl->me_cl = NULL;
+ list_move_tail(&cb->list, &cmpl_list->list);
return ret;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 41/87] mei: amthif: discard not read messages
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 40/87] mei: fix NULL dereferencing during FW initiated disconnection Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 42/87] mei: bus: call mei_cl_read_start under device lock Greg Kroah-Hartman
` (40 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Usyskin, Tomas Winkler
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit 9d04ee11db7bf0d848266cbfd7db336097a0e239 upstream.
When a message is received and amthif client is not in reading state
the message is ignored and left dangling in the queue. This may happen
after one of the amthif host connections is closed w/o completing the
reading. Another client will pick up a wrong message on next read
attempt which will lead to link reset.
To prevent this the driver has to properly discard the message when
amthif client is not in reading state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/amthif.c | 4 +++-
drivers/misc/mei/interrupt.c | 1 -
drivers/misc/mei/mei_dev.h | 2 ++
3 files changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -417,8 +417,10 @@ int mei_amthif_irq_read_msg(struct mei_c
dev = cl->dev;
- if (dev->iamthif_state != MEI_IAMTHIF_READING)
+ if (dev->iamthif_state != MEI_IAMTHIF_READING) {
+ mei_irq_discard_msg(dev, mei_hdr);
return 0;
+ }
ret = mei_cl_irq_read_msg(cl, mei_hdr, cmpl_list);
if (ret)
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -76,7 +76,6 @@ static inline int mei_cl_hbm_equal(struc
* @dev: mei device
* @hdr: message header
*/
-static inline
void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr)
{
/*
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -782,6 +782,8 @@ bool mei_hbuf_acquire(struct mei_device
bool mei_write_is_idle(struct mei_device *dev);
+void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr);
+
#if IS_ENABLED(CONFIG_DEBUG_FS)
int mei_dbgfs_register(struct mei_device *dev, const char *name);
void mei_dbgfs_deregister(struct mei_device *dev);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 42/87] mei: bus: call mei_cl_read_start under device lock
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 41/87] mei: amthif: discard not read messages Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 43/87] USB: serial: mxuport: fix use-after-free in probe error path Greg Kroah-Hartman
` (39 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Usyskin, Tomas Winkler
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit bc46b45a421a64a0895dd41a34d3d2086e1ac7f6 upstream.
Ensure that mei_cl_read_start is called under the device lock
also in the bus layer. The function updates global ctrl_wr_list
which should be locked.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/bus.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -222,17 +222,23 @@ EXPORT_SYMBOL_GPL(mei_cldev_recv);
static void mei_cl_bus_event_work(struct work_struct *work)
{
struct mei_cl_device *cldev;
+ struct mei_device *bus;
cldev = container_of(work, struct mei_cl_device, event_work);
+ bus = cldev->bus;
+
if (cldev->event_cb)
cldev->event_cb(cldev, cldev->events, cldev->event_context);
cldev->events = 0;
/* Prepare for the next read */
- if (cldev->events_mask & BIT(MEI_CL_EVENT_RX))
+ if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
+ mutex_lock(&bus->device_lock);
mei_cl_read_start(cldev->cl, 0, NULL);
+ mutex_unlock(&bus->device_lock);
+ }
}
/**
@@ -296,6 +302,7 @@ int mei_cldev_register_event_cb(struct m
unsigned long events_mask,
mei_cldev_event_cb_t event_cb, void *context)
{
+ struct mei_device *bus = cldev->bus;
int ret;
if (cldev->event_cb)
@@ -308,15 +315,17 @@ int mei_cldev_register_event_cb(struct m
INIT_WORK(&cldev->event_work, mei_cl_bus_event_work);
if (cldev->events_mask & BIT(MEI_CL_EVENT_RX)) {
+ mutex_lock(&bus->device_lock);
ret = mei_cl_read_start(cldev->cl, 0, NULL);
+ mutex_unlock(&bus->device_lock);
if (ret && ret != -EBUSY)
return ret;
}
if (cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF)) {
- mutex_lock(&cldev->cl->dev->device_lock);
+ mutex_lock(&bus->device_lock);
ret = mei_cl_notify_request(cldev->cl, NULL, event_cb ? 1 : 0);
- mutex_unlock(&cldev->cl->dev->device_lock);
+ mutex_unlock(&bus->device_lock);
if (ret)
return ret;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 43/87] USB: serial: mxuport: fix use-after-free in probe error path
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 42/87] mei: bus: call mei_cl_read_start under device lock Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 44/87] USB: serial: keyspan: " Greg Kroah-Hartman
` (38 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit 9e45284984096314994777f27e1446dfbfd2f0d7 upstream.
The interface read and event URBs are submitted in attach, but were
never explicitly unlinked by the driver. Instead the URBs would have
been killed by usb-serial core on disconnect.
In case of a late probe error (e.g. due to failed minor allocation),
disconnect is never called and we could end up with active URBs for an
unbound interface. This in turn could lead to deallocated memory being
dereferenced in the completion callbacks.
Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX
driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/mxuport.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/usb/serial/mxuport.c
+++ b/drivers/usb/serial/mxuport.c
@@ -1259,6 +1259,15 @@ static int mxuport_attach(struct usb_ser
return 0;
}
+static void mxuport_release(struct usb_serial *serial)
+{
+ struct usb_serial_port *port0 = serial->port[0];
+ struct usb_serial_port *port1 = serial->port[1];
+
+ usb_serial_generic_close(port1);
+ usb_serial_generic_close(port0);
+}
+
static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct mxuport_port *mxport = usb_get_serial_port_data(port);
@@ -1361,6 +1370,7 @@ static struct usb_serial_driver mxuport_
.probe = mxuport_probe,
.port_probe = mxuport_port_probe,
.attach = mxuport_attach,
+ .release = mxuport_release,
.calc_num_ports = mxuport_calc_num_ports,
.open = mxuport_open,
.close = mxuport_close,
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 44/87] USB: serial: keyspan: fix use-after-free in probe error path
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 43/87] USB: serial: mxuport: fix use-after-free in probe error path Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 45/87] USB: serial: quatech2: " Greg Kroah-Hartman
` (37 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit 35be1a71d70775e7bd7e45fa6d2897342ff4c9d2 upstream.
The interface instat and indat URBs were submitted in attach, but never
unlinked in release before deallocating the corresponding transfer
buffers.
In the case of a late probe error (e.g. due to failed minor allocation),
disconnect would not have been called before release, causing the
buffers to be freed while the URBs are still in use. We'd also end up
with active URBs for an unbound interface.
Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect,
release")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/keyspan.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2376,6 +2376,10 @@ static void keyspan_release(struct usb_s
s_priv = usb_get_serial_data(serial);
+ /* Make sure to unlink the URBs submitted in attach. */
+ usb_kill_urb(s_priv->instat_urb);
+ usb_kill_urb(s_priv->indat_urb);
+
usb_free_urb(s_priv->instat_urb);
usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 45/87] USB: serial: quatech2: fix use-after-free in probe error path
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 44/87] USB: serial: keyspan: " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 46/87] USB: serial: io_edgeport: fix memory leaks in attach " Greg Kroah-Hartman
` (36 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit 028c49f5e02a257c94129cd815f7c8485f51d4ef upstream.
The interface read URB is submitted in attach, but was only unlinked by
the driver at disconnect.
In case of a late probe error (e.g. due to failed minor allocation),
disconnect is never called and we would end up with active URBs for an
unbound interface. This in turn could lead to deallocated memory being
dereferenced in the completion callback.
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/quatech2.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -141,6 +141,7 @@ static void qt2_release(struct usb_seria
serial_priv = usb_get_serial_data(serial);
+ usb_kill_urb(serial_priv->read_urb);
usb_free_urb(serial_priv->read_urb);
kfree(serial_priv->read_buffer);
kfree(serial_priv);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 46/87] USB: serial: io_edgeport: fix memory leaks in attach error path
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 45/87] USB: serial: quatech2: " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 47/87] USB: serial: io_edgeport: fix memory leaks in probe " Greg Kroah-Hartman
` (35 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit c5c0c55598cefc826d6cfb0a417eeaee3631715c upstream.
Private data, URBs and buffers allocated for Epic devices during
attach were never released on errors (e.g. missing endpoints).
Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/io_edgeport.c | 39 ++++++++++++++++++++++++++++-----------
1 file changed, 28 insertions(+), 11 deletions(-)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2849,14 +2849,16 @@ static int edge_startup(struct usb_seria
/* not set up yet, so do it now */
edge_serial->interrupt_read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->interrupt_read_urb)
- return -ENOMEM;
+ if (!edge_serial->interrupt_read_urb) {
+ response = -ENOMEM;
+ break;
+ }
edge_serial->interrupt_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->interrupt_in_buffer) {
- usb_free_urb(edge_serial->interrupt_read_urb);
- return -ENOMEM;
+ response = -ENOMEM;
+ break;
}
edge_serial->interrupt_in_endpoint =
endpoint->bEndpointAddress;
@@ -2884,14 +2886,16 @@ static int edge_startup(struct usb_seria
/* not set up yet, so do it now */
edge_serial->read_urb =
usb_alloc_urb(0, GFP_KERNEL);
- if (!edge_serial->read_urb)
- return -ENOMEM;
+ if (!edge_serial->read_urb) {
+ response = -ENOMEM;
+ break;
+ }
edge_serial->bulk_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!edge_serial->bulk_in_buffer) {
- usb_free_urb(edge_serial->read_urb);
- return -ENOMEM;
+ response = -ENOMEM;
+ break;
}
edge_serial->bulk_in_endpoint =
endpoint->bEndpointAddress;
@@ -2917,9 +2921,22 @@ static int edge_startup(struct usb_seria
}
}
- if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
- dev_err(ddev, "Error - the proper endpoints were not found!\n");
- return -ENODEV;
+ if (response || !interrupt_in_found || !bulk_in_found ||
+ !bulk_out_found) {
+ if (!response) {
+ dev_err(ddev, "expected endpoints not found\n");
+ response = -ENODEV;
+ }
+
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+
+ kfree(edge_serial);
+
+ return response;
}
/* start interrupt read for this edgeport this interrupt will
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 47/87] USB: serial: io_edgeport: fix memory leaks in probe error path
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 46/87] USB: serial: io_edgeport: fix memory leaks in attach " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 48/87] USB: serial: option: add support for Cinterion PH8 and AHxx Greg Kroah-Hartman
` (34 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit c8d62957d450cc1a22ce3242908709fe367ddc8e upstream.
URBs and buffers allocated in attach for Epic devices would never be
deallocated in case of a later probe error (e.g. failure to allocate
minor numbers) as disconnect is then never called.
Fix by moving deallocation to release and making sure that the
URBs are first unlinked.
Fixes: f9c99bb8b3a1 ("USB: usb-serial: replace shutdown with disconnect,
release")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/io_edgeport.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2959,16 +2959,9 @@ static void edge_disconnect(struct usb_s
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
- /* stop reads and writes on all ports */
- /* free up our endpoint stuff */
if (edge_serial->is_epic) {
usb_kill_urb(edge_serial->interrupt_read_urb);
- usb_free_urb(edge_serial->interrupt_read_urb);
- kfree(edge_serial->interrupt_in_buffer);
-
usb_kill_urb(edge_serial->read_urb);
- usb_free_urb(edge_serial->read_urb);
- kfree(edge_serial->bulk_in_buffer);
}
}
@@ -2981,6 +2974,16 @@ static void edge_release(struct usb_seri
{
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
+ if (edge_serial->is_epic) {
+ usb_kill_urb(edge_serial->interrupt_read_urb);
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_kill_urb(edge_serial->read_urb);
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+ }
+
kfree(edge_serial);
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 48/87] USB: serial: option: add support for Cinterion PH8 and AHxx
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 47/87] USB: serial: io_edgeport: fix memory leaks in probe " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 49/87] USB: serial: option: add more ZTE device ids Greg Kroah-Hartman
` (33 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans-Christoph Schemmel, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Schemmel Hans-Christoph <Hans-Christoph.Schemmel@gemalto.com>
commit 444f94e9e625f6ec6bbe2cb232a6451c637f35a3 upstream.
Added support for Gemalto's Cinterion PH8 and AHxx products
with 2 RmNet Interfaces and products with 1 RmNet + 1 USB Audio interface.
In addition some minor renaming and formatting.
Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
[johan: sort current entries and trim trailing whitespace ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 26 ++++++++++++++++++++------
1 file changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -375,18 +375,22 @@ static void option_instat_callback(struc
#define HAIER_PRODUCT_CE81B 0x10f8
#define HAIER_PRODUCT_CE100 0x2009
-/* Cinterion (formerly Siemens) products */
-#define SIEMENS_VENDOR_ID 0x0681
-#define CINTERION_VENDOR_ID 0x1e2d
+/* Gemalto's Cinterion products (formerly Siemens) */
+#define SIEMENS_VENDOR_ID 0x0681
+#define CINTERION_VENDOR_ID 0x1e2d
+#define CINTERION_PRODUCT_HC25_MDMNET 0x0040
#define CINTERION_PRODUCT_HC25_MDM 0x0047
-#define CINTERION_PRODUCT_HC25_MDMNET 0x0040
+#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */
#define CINTERION_PRODUCT_HC28_MDM 0x004C
-#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
#define CINTERION_PRODUCT_AHXX 0x0055
#define CINTERION_PRODUCT_PLXX 0x0060
+#define CINTERION_PRODUCT_PH8_2RMNET 0x0082
+#define CINTERION_PRODUCT_PH8_AUDIO 0x0083
+#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
+#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -633,6 +637,10 @@ static const struct option_blacklist_inf
.reserved = BIT(1) | BIT(2) | BIT(3),
};
+static const struct option_blacklist_info cinterion_rmnet2_blacklist = {
+ .reserved = BIT(4) | BIT(5),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1712,7 +1720,13 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff),
+ .driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 49/87] USB: serial: option: add more ZTE device ids
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 48/87] USB: serial: option: add support for Cinterion PH8 and AHxx Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 50/87] USB: serial: option: add even " Greg Kroah-Hartman
` (32 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, lei liu, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: lei liu <liu.lei78@zte.com.cn>
commit f0d09463c59c2d764a6c6d492cbe6d2c77f27153 upstream.
More ZTE device ids.
Signed-off-by: lei liu <liu.lei78@zte.com.cn>
[properly sort them - gregkh]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 75 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1610,7 +1610,79 @@ static const struct usb_device_id option
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff45, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff46, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff47, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff48, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff49, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff50, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff51, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff52, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff53, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff54, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff55, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff56, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff57, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff58, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff59, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff60, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff61, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff62, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff63, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff64, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff65, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff66, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff67, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff68, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff69, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff70, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff71, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff72, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff73, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff74, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff75, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff76, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff77, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff78, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff79, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff80, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff81, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff82, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff83, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff84, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff85, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff86, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff87, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff88, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff89, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8a, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
@@ -1621,6 +1693,7 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 50/87] USB: serial: option: add even more ZTE device ids
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 49/87] USB: serial: option: add more ZTE device ids Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 51/87] usb: gadget: f_fs: Fix EFAULT generation for async read operations Greg Kroah-Hartman
` (31 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, lei liu, Johan Hovold
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lei Liu <lei35151@163.com>
commit 74d2a91aec97ab832790c9398d320413ad185321 upstream.
Add even more ZTE device ids.
Signed-off-by: lei liu <liu.lei78@zte.com.cn>
[johan: rebase and replace commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 54 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1693,6 +1693,60 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff9f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaa, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffab, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffac, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffae, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffba, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbc, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbd, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbe, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc5, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffca, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcc, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcd, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffce, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcf, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd0, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd2, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd3, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd4, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd5, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 51/87] usb: gadget: f_fs: Fix EFAULT generation for async read operations
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 50/87] USB: serial: option: add even " Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 53/87] usb: misc: usbtest: fix pattern tests for scatterlists Greg Kroah-Hartman
` (30 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Nazarewicz,
Lars-Peter Clausen, Felipe Balbi
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <lars@metafoo.de>
commit 332a5b446b7916d272c2a659a3b20909ce34d2c1 upstream.
In the current implementation functionfs generates a EFAULT for async read
operations if the read buffer size is larger than the URB data size. Since
a application does not necessarily know how much data the host side is
going to send it typically supplies a buffer larger than the actual data,
which will then result in a EFAULT error.
This behaviour was introduced while refactoring the code to use iov_iter
interface in commit c993c39b8639 ("gadget/function/f_fs.c: use put iov_iter
into io_data"). The original code took the minimum over the URB size and
the user buffer size and then attempted to copy that many bytes using
copy_to_user(). If copy_to_user() could not copy all data a EFAULT error
was generated. Restore the original behaviour by only generating a EFAULT
error when the number of bytes copied is not the size of the URB and the
target buffer has not been fully filled.
Commit 342f39a6c8d3 ("usb: gadget: f_fs: fix check in read operation")
already fixed the same problem for the synchronous read path.
Fixes: c993c39b8639 ("gadget/function/f_fs.c: use put iov_iter into io_data")
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/f_fs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -651,7 +651,7 @@ static void ffs_user_copy_worker(struct
if (io_data->read && ret > 0) {
use_mm(io_data->mm);
ret = copy_to_iter(io_data->buf, ret, &io_data->data);
- if (iov_iter_count(&io_data->data))
+ if (ret != io_data->req->actual && iov_iter_count(&io_data->data))
ret = -EFAULT;
unuse_mm(io_data->mm);
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 53/87] usb: misc: usbtest: fix pattern tests for scatterlists.
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 51/87] usb: gadget: f_fs: Fix EFAULT generation for async read operations Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 54/87] USB: leave LPM alone if possible when binding/unbinding interface drivers Greg Kroah-Hartman
` (29 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathias Nyman, Felipe Balbi, Alan Stern
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit cdc77c82a8286b1181b81b6e5ef60c8e83ded7bc upstream.
The current implemenentation restart the sent pattern for each entry in
the sg list. The receiving end expects a continuous pattern, and test
will fail unless scatterilst entries happen to be aligned with the
pattern
Fix this by calculating the pattern byte based on total sent size
instead of just the current sg entry.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: 8b5249019352 ("[PATCH] USB: usbtest: scatterlist OUT data pattern testing")
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/usbtest.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -529,6 +529,7 @@ static struct scatterlist *
alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe)
{
struct scatterlist *sg;
+ unsigned int n_size = 0;
unsigned i;
unsigned size = max;
unsigned maxpacket =
@@ -561,7 +562,8 @@ alloc_sglist(int nents, int max, int var
break;
case 1:
for (j = 0; j < size; j++)
- *buf++ = (u8) ((j % maxpacket) % 63);
+ *buf++ = (u8) (((j + n_size) % maxpacket) % 63);
+ n_size += size;
break;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 54/87] USB: leave LPM alone if possible when binding/unbinding interface drivers
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 53/87] usb: misc: usbtest: fix pattern tests for scatterlists Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 55/87] usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request() Greg Kroah-Hartman
` (28 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alan Stern, Matthew Giassa, Mathias Nyman
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <stern@rowland.harvard.edu>
commit 6fb650d43da3e7054984dc548eaa88765a94d49f upstream.
When a USB driver is bound to an interface (either through probing or
by claiming it) or is unbound from an interface, the USB core always
disables Link Power Management during the transition and then
re-enables it afterward. The reason is because the driver might want
to prevent hub-initiated link power transitions, in which case the HCD
would have to recalculate the various LPM parameters. This
recalculation takes place when LPM is re-enabled and the new
parameters are sent to the device and its parent hub.
However, if the driver does not want to prevent hub-initiated link
power transitions then none of this work is necessary. The parameters
don't need to be recalculated, and LPM doesn't need to be disabled and
re-enabled.
It turns out that disabling and enabling LPM can be time-consuming,
enough so that it interferes with user programs that want to claim and
release interfaces rapidly via usbfs. Since the usbfs kernel driver
doesn't set the disable_hub_initiated_lpm flag, we can speed things up
and get the user programs to work by leaving LPM alone whenever the
flag isn't set.
And while we're improving the way disable_hub_initiated_lpm gets used,
let's also fix its kerneldoc.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Matthew Giassa <matthew@giassa.net>
CC: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/driver.c | 40 +++++++++++++++++++++++-----------------
include/linux/usb.h | 2 +-
2 files changed, 24 insertions(+), 18 deletions(-)
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@ static int usb_probe_interface(struct de
struct usb_device *udev = interface_to_usbdev(intf);
const struct usb_device_id *id;
int error = -ENODEV;
- int lpm_disable_error;
+ int lpm_disable_error = -ENODEV;
dev_dbg(dev, "%s\n", __func__);
@@ -336,12 +336,14 @@ static int usb_probe_interface(struct de
* setting during probe, that should also be fine. usb_set_interface()
* will attempt to disable LPM, and fail if it can't disable it.
*/
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
- if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
- dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
- __func__, driver->name);
- error = lpm_disable_error;
- goto err;
+ if (driver->disable_hub_initiated_lpm) {
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error) {
+ dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ error = lpm_disable_error;
+ goto err;
+ }
}
/* Carry out a deferred switch to altsetting 0 */
@@ -391,7 +393,8 @@ static int usb_unbind_interface(struct d
struct usb_interface *intf = to_usb_interface(dev);
struct usb_host_endpoint *ep, **eps = NULL;
struct usb_device *udev;
- int i, j, error, r, lpm_disable_error;
+ int i, j, error, r;
+ int lpm_disable_error = -ENODEV;
intf->condition = USB_INTERFACE_UNBINDING;
@@ -399,12 +402,13 @@ static int usb_unbind_interface(struct d
udev = interface_to_usbdev(intf);
error = usb_autoresume_device(udev);
- /* Hub-initiated LPM policy may change, so attempt to disable LPM until
+ /* If hub-initiated LPM policy may change, attempt to disable LPM until
* the driver is unbound. If LPM isn't disabled, that's fine because it
* wouldn't be enabled unless all the bound interfaces supported
* hub-initiated LPM.
*/
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (driver->disable_hub_initiated_lpm)
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
/*
* Terminate all URBs for this interface unless the driver
@@ -505,7 +509,7 @@ int usb_driver_claim_interface(struct us
struct device *dev;
struct usb_device *udev;
int retval = 0;
- int lpm_disable_error;
+ int lpm_disable_error = -ENODEV;
if (!iface)
return -ENODEV;
@@ -526,12 +530,14 @@ int usb_driver_claim_interface(struct us
iface->condition = USB_INTERFACE_BOUND;
- /* Disable LPM until this driver is bound. */
- lpm_disable_error = usb_unlocked_disable_lpm(udev);
- if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
- dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
- __func__, driver->name);
- return -ENOMEM;
+ /* See the comment about disabling LPM in usb_probe_interface(). */
+ if (driver->disable_hub_initiated_lpm) {
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error) {
+ dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ return -ENOMEM;
+ }
}
/* Claimed interfaces are initially inactive (suspended) and
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1066,7 +1066,7 @@ struct usbdrv_wrap {
* for interfaces bound to this driver.
* @soft_unbind: if set to 1, the USB core will not kill URBs and disable
* endpoints before calling the driver's disconnect method.
- * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ * @disable_hub_initiated_lpm: if set to 1, the USB core will not allow hubs
* to initiate lower power link state transitions when an idle timeout
* occurs. Device-initiated USB 3.0 link PM will still be allowed.
*
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 55/87] usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 54/87] USB: leave LPM alone if possible when binding/unbinding interface drivers Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:49 ` [PATCH 4.5 56/87] staging: comedi: das1800: fix possible NULL dereference Greg Kroah-Hartman
` (27 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
commit 5096c4d3bfa75bdd23c78f799aabd08598afb48f upstream.
The argument of dev_err() in usb_gadget_map_request() should be dev
instead of &gadget->dev.
Fixes: 7ace8fc ("usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/udc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -75,7 +75,7 @@ int usb_gadget_map_request(struct usb_ga
mapped = dma_map_sg(dev, req->sg, req->num_sgs,
is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (mapped == 0) {
- dev_err(&gadget->dev, "failed to map SGs\n");
+ dev_err(dev, "failed to map SGs\n");
return -EFAULT;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 56/87] staging: comedi: das1800: fix possible NULL dereference
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 55/87] usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request() Greg Kroah-Hartman
@ 2016-05-30 20:49 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 62/87] xen/x86: actually allocate legacy interrupts on PV guests Greg Kroah-Hartman
` (26 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, H Hartley Sweeten, Ian Abbott
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: H Hartley Sweeten <hsweeten@visionengravers.com>
commit d375278d666760e195693b57415ba0a125cadd55 upstream.
DMA is optional with this driver. If it was not enabled the devpriv->dma
pointer will be NULL.
Fix the possible NULL pointer dereference when trying to disable the DMA
channels in das1800_ai_cancel() and tidy up the comments to fix the
checkpatch.pl issues:
WARNING: line over 80 characters
It's probably harmless in das1800_ai_setup_dma() because the 'desc' pointer
will not be used if DMA is disabled but fix it there also.
Fixes: 99dfc3357e98 ("staging: comedi: das1800: remove depends on ISA_DMA_API limitation")
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/das1800.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -567,14 +567,17 @@ static int das1800_cancel(struct comedi_
struct comedi_isadma_desc *desc;
int i;
- outb(0x0, dev->iobase + DAS1800_STATUS); /* disable conversions */
- outb(0x0, dev->iobase + DAS1800_CONTROL_B); /* disable interrupts and dma */
- outb(0x0, dev->iobase + DAS1800_CONTROL_A); /* disable and clear fifo and stop triggering */
-
- for (i = 0; i < 2; i++) {
- desc = &dma->desc[i];
- if (desc->chan)
- comedi_isadma_disable(desc->chan);
+ /* disable and stop conversions */
+ outb(0x0, dev->iobase + DAS1800_STATUS);
+ outb(0x0, dev->iobase + DAS1800_CONTROL_B);
+ outb(0x0, dev->iobase + DAS1800_CONTROL_A);
+
+ if (dma) {
+ for (i = 0; i < 2; i++) {
+ desc = &dma->desc[i];
+ if (desc->chan)
+ comedi_isadma_disable(desc->chan);
+ }
}
return 0;
@@ -934,13 +937,14 @@ static void das1800_ai_setup_dma(struct
{
struct das1800_private *devpriv = dev->private;
struct comedi_isadma *dma = devpriv->dma;
- struct comedi_isadma_desc *desc = &dma->desc[0];
+ struct comedi_isadma_desc *desc;
unsigned int bytes;
if ((devpriv->irq_dma_bits & DMA_ENABLED) == 0)
return;
dma->cur_dma = 0;
+ desc = &dma->desc[0];
/* determine a dma transfer size to fill buffer in 0.3 sec */
bytes = das1800_ai_transfer_size(dev, s, desc->maxsize, 300000000);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 62/87] xen/x86: actually allocate legacy interrupts on PV guests
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2016-05-30 20:49 ` [PATCH 4.5 56/87] staging: comedi: das1800: fix possible NULL dereference Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 63/87] tty: vt, return error when con_startup fails Greg Kroah-Hartman
` (25 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefano Stabellini
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Stabellini <sstabellini@kernel.org>
commit 702f926067d2a4b28c10a3c41a1172dd62d9e735 upstream.
b4ff8389ed14 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/pci/xen.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -491,8 +491,11 @@ int __init pci_xen_initial_domain(void)
#endif
__acpi_register_gsi = acpi_register_gsi_xen;
__acpi_unregister_gsi = NULL;
- /* Pre-allocate legacy irqs */
- for (irq = 0; irq < nr_legacy_irqs(); irq++) {
+ /*
+ * Pre-allocate the legacy IRQs. Use NR_LEGACY_IRQS here
+ * because we don't have a PIC and thus nr_legacy_irqs() is zero.
+ */
+ for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
int trigger, polarity;
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 63/87] tty: vt, return error when con_startup fails
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 62/87] xen/x86: actually allocate legacy interrupts on PV guests Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 64/87] TTY: n_gsm, fix false positive WARN_ON Greg Kroah-Hartman
` (24 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Dan Carpenter
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Slaby <jslaby@suse.cz>
commit 6798df4c5fe0a7e6d2065cf79649a794e5ba7114 upstream.
When csw->con_startup() fails in do_register_con_driver, we return no
error (i.e. 0). This was changed back in 2006 by commit 3e795de763.
Before that we used to return -ENODEV.
So fix the return value to be -ENODEV in that case again.
Fixes: 3e795de763 ("VT binding: Add binding/unbinding support for the VT console")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: "Dan Carpenter" <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/vt/vt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3583,9 +3583,10 @@ static int do_register_con_driver(const
goto err;
desc = csw->con_startup();
-
- if (!desc)
+ if (!desc) {
+ retval = -ENODEV;
goto err;
+ }
retval = -EINVAL;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 64/87] TTY: n_gsm, fix false positive WARN_ON
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 63/87] tty: vt, return error when con_startup fails Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 65/87] tty/serial: atmel: fix hardware handshake selection Greg Kroah-Hartman
` (23 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dmitry Vyukov, Alan Cox, Jiri Slaby
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Slaby <jslaby@suse.cz>
commit d175feca89a1c162f60f4e3560ca7bc9437c65eb upstream.
Dmitry reported, that the current cleanup code in n_gsm can trigger a
warning:
WARNING: CPU: 2 PID: 24238 at drivers/tty/n_gsm.c:2048 gsm_cleanup_mux+0x166/0x6b0()
...
Call Trace:
...
[<ffffffff81247ab9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:490
[<ffffffff828d0456>] gsm_cleanup_mux+0x166/0x6b0 drivers/tty/n_gsm.c:2048
[<ffffffff828d4d87>] gsmld_open+0x5b7/0x7a0 drivers/tty/n_gsm.c:2386
[<ffffffff828b9078>] tty_ldisc_open.isra.2+0x78/0xd0 drivers/tty/tty_ldisc.c:447
[<ffffffff828b973a>] tty_set_ldisc+0x1ca/0xa70 drivers/tty/tty_ldisc.c:567
[< inline >] tiocsetd drivers/tty/tty_io.c:2650
[<ffffffff828a14ea>] tty_ioctl+0xb2a/0x2140 drivers/tty/tty_io.c:2883
...
But this is a legal path when open fails to find a space in the
gsm_mux array and tries to clean up. So make it a standard test
instead of a warning.
Reported-by: "Dmitry Vyukov" <dvyukov@google.com>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/CACT4Y+bHQbAB68VFi7Romcs-Z9ZW3kQRvcq+BvHH1oa5NcAdLA@mail.gmail.com
Fixes: 5a640967 ("tty/n_gsm.c: fix a memory leak in gsmld_open()")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2045,7 +2045,9 @@ static void gsm_cleanup_mux(struct gsm_m
}
}
spin_unlock(&gsm_mux_lock);
- WARN_ON(i == MAX_MUX);
+ /* open failed before registering => nothing to do */
+ if (i == MAX_MUX)
+ return;
/* In theory disconnecting DLCI 0 is sufficient but for some
modems this is apparently not the case. */
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 65/87] tty/serial: atmel: fix hardware handshake selection
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 64/87] TTY: n_gsm, fix false positive WARN_ON Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 66/87] Fix OpenSSH pty regression on close Greg Kroah-Hartman
` (22 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexandre Belloni, Nicolas Ferre
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
commit 5be605ac9af979265d7b64c160ad9928088a78be upstream.
Commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when
hardware handshake is enabled") actually allowed to enable hardware
handshaking.
Before, the CRTSCTS flags was silently ignored.
As the DMA controller can't drive RTS (as explain in the commit message).
Ensure that hardware flow control stays disabled when DMA is used and FIFOs
are not available.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/atmel_serial.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -273,6 +273,13 @@ static bool atmel_use_dma_rx(struct uart
return atmel_port->use_dma_rx;
}
+static bool atmel_use_fifo(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ return atmel_port->fifo_size;
+}
+
static unsigned int atmel_get_lines_status(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -2082,7 +2089,12 @@ static void atmel_set_termios(struct uar
mode |= ATMEL_US_USMODE_RS485;
} else if (termios->c_cflag & CRTSCTS) {
/* RS232 with hardware handshake (RTS/CTS) */
- mode |= ATMEL_US_USMODE_HWHS;
+ if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
+ dev_info(port->dev, "not enabling hardware flow control because DMA is used");
+ termios->c_cflag &= ~CRTSCTS;
+ } else {
+ mode |= ATMEL_US_USMODE_HWHS;
+ }
} else {
/* RS232 without hadware handshake */
mode |= ATMEL_US_USMODE_NORMAL;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 66/87] Fix OpenSSH pty regression on close
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 65/87] tty/serial: atmel: fix hardware handshake selection Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 68/87] serial: 8250_mid: use proper bar for DNV platform Greg Kroah-Hartman
` (21 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Volth, Marc Aurele La France,
Brian Bloniarz, Peter Hurley
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Bloniarz <brian.bloniarz@gmail.com>
commit 0f40fbbcc34e093255a2b2d70b6b0fb48c3f39aa upstream.
OpenSSH expects the (non-blocking) read() of pty master to return
EAGAIN only if it has received all of the slave-side output after
it has received SIGCHLD. This used to work on pre-3.12 kernels.
This fix effectively forces non-blocking read() and poll() to
block for parallel i/o to complete for all ttys. It also unwinds
these changes:
1) f8747d4a466ab2cafe56112c51b3379f9fdb7a12
tty: Fix pty master read() after slave closes
2) 52bce7f8d4fc633c9a9d0646eef58ba6ae9a3b73
pty, n_tty: Simplify input processing on final close
3) 1a48632ffed61352a7810ce089dc5a8bcd505a60
pty: Fix input race when closing
Inspired by analysis and patch from Marc Aurele La France <tsi@tuyoix.net>
Reported-by: Volth <openssh@volth.com>
Reported-by: Marc Aurele La France <tsi@tuyoix.net>
BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=52
BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=2492
Signed-off-by: Brian Bloniarz <brian.bloniarz@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/serial/tty.txt | 3 -
drivers/tty/n_hdlc.c | 4 +-
drivers/tty/n_tty.c | 70 ++++++++++++++++++++-----------------------
drivers/tty/pty.c | 4 --
drivers/tty/tty_buffer.c | 34 +++-----------------
include/linux/tty.h | 2 -
6 files changed, 43 insertions(+), 74 deletions(-)
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -213,9 +213,6 @@ TTY_IO_ERROR If set, causes all subsequ
TTY_OTHER_CLOSED Device is a pty and the other side has closed.
-TTY_OTHER_DONE Device is a pty and the other side has closed and
- all pending input processing has been completed.
-
TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into
smaller chunks.
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -600,7 +600,7 @@ static ssize_t n_hdlc_tty_read(struct tt
add_wait_queue(&tty->read_wait, &wait);
for (;;) {
- if (test_bit(TTY_OTHER_DONE, &tty->flags)) {
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
ret = -EIO;
break;
}
@@ -828,7 +828,7 @@ static unsigned int n_hdlc_tty_poll(stru
/* set bits for operations that won't block */
if (n_hdlc->rx_buf_list.head)
mask |= POLLIN | POLLRDNORM; /* readable */
- if (test_bit(TTY_OTHER_DONE, &tty->flags))
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
mask |= POLLHUP;
if (tty_hung_up_p(filp))
mask |= POLLHUP;
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1963,18 +1963,6 @@ static inline int input_available_p(stru
return ldata->commit_head - ldata->read_tail >= amt;
}
-static inline int check_other_done(struct tty_struct *tty)
-{
- int done = test_bit(TTY_OTHER_DONE, &tty->flags);
- if (done) {
- /* paired with cmpxchg() in check_other_closed(); ensures
- * read buffer head index is not stale
- */
- smp_mb__after_atomic();
- }
- return done;
-}
-
/**
* copy_from_read_buf - copy read data directly
* @tty: terminal device
@@ -2170,7 +2158,7 @@ static ssize_t n_tty_read(struct tty_str
struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
- int c, done;
+ int c;
int minimum, time;
ssize_t retval = 0;
long timeout;
@@ -2238,32 +2226,35 @@ static ssize_t n_tty_read(struct tty_str
((minimum - (b - buf)) >= 1))
ldata->minimum_to_wake = (minimum - (b - buf));
- done = check_other_done(tty);
-
if (!input_available_p(tty, 0)) {
- if (done) {
- retval = -EIO;
- break;
- }
- if (tty_hung_up_p(file))
- break;
- if (!timeout)
- break;
- if (file->f_flags & O_NONBLOCK) {
- retval = -EAGAIN;
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
up_read(&tty->termios_rwsem);
+ tty_buffer_flush_work(tty->port);
+ down_read(&tty->termios_rwsem);
+ if (!input_available_p(tty, 0)) {
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
+ retval = -EIO;
+ break;
+ }
+ if (tty_hung_up_p(file))
+ break;
+ if (!timeout)
+ break;
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ break;
+ }
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ up_read(&tty->termios_rwsem);
- timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
- timeout);
+ timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
+ timeout);
- down_read(&tty->termios_rwsem);
- continue;
+ down_read(&tty->termios_rwsem);
+ continue;
+ }
}
if (ldata->icanon && !L_EXTPROC(tty)) {
@@ -2445,12 +2436,17 @@ static unsigned int n_tty_poll(struct tt
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (check_other_done(tty))
- mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
+ else {
+ tty_buffer_flush_work(tty->port);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -59,7 +59,7 @@ static void pty_close(struct tty_struct
if (!tty->link)
return;
set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
- tty_flip_buffer_push(tty->link->port);
+ wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
set_bit(TTY_OTHER_CLOSED, &tty->flags);
@@ -247,9 +247,7 @@ static int pty_open(struct tty_struct *t
goto out;
clear_bit(TTY_IO_ERROR, &tty->flags);
- /* TTY_OTHER_CLOSED must be cleared before TTY_OTHER_DONE */
clear_bit(TTY_OTHER_CLOSED, &tty->link->flags);
- clear_bit(TTY_OTHER_DONE, &tty->link->flags);
set_bit(TTY_THROTTLED, &tty->flags);
return 0;
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -37,29 +37,6 @@
#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
-/*
- * If all tty flip buffers have been processed by flush_to_ldisc() or
- * dropped by tty_buffer_flush(), check if the linked pty has been closed.
- * If so, wake the reader/poll to process
- */
-static inline void check_other_closed(struct tty_struct *tty)
-{
- unsigned long flags, old;
-
- /* transition from TTY_OTHER_CLOSED => TTY_OTHER_DONE must be atomic */
- for (flags = ACCESS_ONCE(tty->flags);
- test_bit(TTY_OTHER_CLOSED, &flags);
- ) {
- old = flags;
- __set_bit(TTY_OTHER_DONE, &flags);
- flags = cmpxchg(&tty->flags, old, flags);
- if (old == flags) {
- wake_up_interruptible(&tty->read_wait);
- break;
- }
- }
-}
-
/**
* tty_buffer_lock_exclusive - gain exclusive access to buffer
* tty_buffer_unlock_exclusive - release exclusive access
@@ -254,8 +231,6 @@ void tty_buffer_flush(struct tty_struct
if (ld && ld->ops->flush_buffer)
ld->ops->flush_buffer(tty);
- check_other_closed(tty);
-
atomic_dec(&buf->priority);
mutex_unlock(&buf->lock);
}
@@ -505,10 +480,8 @@ static void flush_to_ldisc(struct work_s
*/
count = smp_load_acquire(&head->commit) - head->read;
if (!count) {
- if (next == NULL) {
- check_other_closed(tty);
+ if (next == NULL)
break;
- }
buf->head = next;
tty_buffer_free(port, head);
continue;
@@ -597,3 +570,8 @@ bool tty_buffer_cancel_work(struct tty_p
{
return cancel_work_sync(&port->buf.work);
}
+
+void tty_buffer_flush_work(struct tty_port *port)
+{
+ flush_work(&port->buf.work);
+}
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -338,7 +338,6 @@ struct tty_file_private {
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
#define TTY_DEBUG 4 /* Debugging */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
-#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
@@ -464,6 +463,7 @@ extern void tty_buffer_init(struct tty_p
extern void tty_buffer_set_lock_subclass(struct tty_port *port);
extern bool tty_buffer_restart_work(struct tty_port *port);
extern bool tty_buffer_cancel_work(struct tty_port *port);
+extern void tty_buffer_flush_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 68/87] serial: 8250_mid: use proper bar for DNV platform
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 66/87] Fix OpenSSH pty regression on close Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 69/87] serial: 8250_mid: recognize interrupt source in handler Greg Kroah-Hartman
` (20 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lai, Poey Seng, Heikki Krogerus,
Andy Shevchenko
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
commit 107e15fc1f8d6ef69eac5f175971252f76e82f0d upstream.
Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible
resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce
an additional field in the internal structure and pass PCI BAR based on device
ID.
Reported-by: "Lai, Poey Seng" <poey.seng.lai@intel.com>
Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_mid.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -14,6 +14,7 @@
#include <linux/pci.h>
#include <linux/dma/hsu.h>
+#include <linux/8250_pci.h>
#include "8250.h"
@@ -31,6 +32,7 @@
struct mid8250;
struct mid8250_board {
+ unsigned int flags;
unsigned long freq;
unsigned int base_baud;
int (*setup)(struct mid8250 *, struct uart_port *p);
@@ -106,12 +108,13 @@ static int dnv_setup(struct mid8250 *mid
{
struct hsu_dma_chip *chip = &mid->dma_chip;
struct pci_dev *pdev = to_pci_dev(p->dev);
+ unsigned int bar = FL_GET_BASE(mid->board->flags);
int ret;
chip->dev = &pdev->dev;
chip->irq = pdev->irq;
chip->regs = p->membase;
- chip->length = pci_resource_len(pdev, 0);
+ chip->length = pci_resource_len(pdev, bar);
chip->offset = DNV_DMA_CHAN_OFFSET;
/* Falling back to PIO mode if DMA probing fails */
@@ -217,6 +220,7 @@ static int mid8250_probe(struct pci_dev
{
struct uart_8250_port uart;
struct mid8250 *mid;
+ unsigned int bar;
int ret;
ret = pcim_enable_device(pdev);
@@ -230,6 +234,7 @@ static int mid8250_probe(struct pci_dev
return -ENOMEM;
mid->board = (struct mid8250_board *)id->driver_data;
+ bar = FL_GET_BASE(mid->board->flags);
memset(&uart, 0, sizeof(struct uart_8250_port));
@@ -242,8 +247,8 @@ static int mid8250_probe(struct pci_dev
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.set_termios = mid8250_set_termios;
- uart.port.mapbase = pci_resource_start(pdev, 0);
- uart.port.membase = pcim_iomap(pdev, 0, 0);
+ uart.port.mapbase = pci_resource_start(pdev, bar);
+ uart.port.membase = pcim_iomap(pdev, bar, 0);
if (!uart.port.membase)
return -ENOMEM;
@@ -282,18 +287,21 @@ static void mid8250_remove(struct pci_de
}
static const struct mid8250_board pnw_board = {
+ .flags = FL_BASE0,
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
};
static const struct mid8250_board tng_board = {
+ .flags = FL_BASE0,
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
};
static const struct mid8250_board dnv_board = {
+ .flags = FL_BASE1,
.freq = 133333333,
.base_baud = 115200,
.setup = dnv_setup,
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 69/87] serial: 8250_mid: recognize interrupt source in handler
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 68/87] serial: 8250_mid: use proper bar for DNV platform Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 70/87] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios() Greg Kroah-Hartman
` (19 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heikki Krogerus, Andy Shevchenko
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
commit c42850f1ae7e70056f852e67bb9dddf927853b47 upstream.
There is a special register that shows interrupt status by source. In
particular case the source can be a combination of DMA Tx, DMA Rx, and UART.
Read the register and call the handlers only for sources that request an
interrupt.
Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_mid.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -25,6 +25,7 @@
#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
/* Intel MID Specific registers */
+#define INTEL_MID_UART_DNV_FISR 0x08
#define INTEL_MID_UART_PS 0x30
#define INTEL_MID_UART_MUL 0x34
#define INTEL_MID_UART_DIV 0x38
@@ -90,16 +91,16 @@ static int tng_setup(struct mid8250 *mid
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
- int ret;
+ unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+ int ret = IRQ_NONE;
- ret = hsu_dma_irq(&mid->dma_chip, 0);
- ret |= hsu_dma_irq(&mid->dma_chip, 1);
-
- /* For now, letting the HW generate separate interrupt for the UART */
- if (ret)
- return ret;
-
- return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+ if (fisr & BIT(2))
+ ret |= hsu_dma_irq(&mid->dma_chip, 1);
+ if (fisr & BIT(1))
+ ret |= hsu_dma_irq(&mid->dma_chip, 0);
+ if (fisr & BIT(0))
+ ret |= serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+ return ret;
}
#define DNV_DMA_CHAN_OFFSET 0x80
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 70/87] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 69/87] serial: 8250_mid: recognize interrupt source in handler Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 71/87] locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait() Greg Kroah-Hartman
` (18 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chanwoo Choi, Marek Szyprowski,
Krzysztof Kozlowski
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chanwoo Choi <cw00.choi@samsung.com>
commit b8995f527aac143e83d3900ff39357651ea4e0f6 upstream.
This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/tty/serial/samsung.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1263,6 +1263,8 @@ static void s3c24xx_serial_set_termios(s
/* check to see if we need to change clock source */
if (ourport->baudclk != clk) {
+ clk_prepare_enable(clk);
+
s3c24xx_serial_setsource(port, clk_sel);
if (!IS_ERR(ourport->baudclk)) {
@@ -1270,8 +1272,6 @@ static void s3c24xx_serial_set_termios(s
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_prepare_enable(clk);
-
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 71/87] locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 70/87] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios() Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 72/87] clk: bcm2835: add locking to pll*_on/off methods Greg Kroah-Hartman
` (17 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Giovanni Gherdovich,
Peter Zijlstra (Intel),
Linus Torvalds
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <peterz@infradead.org>
commit 54cf809b9512be95f53ed4a5e3b631d1ac42f0fa upstream.
Similar to commits:
51d7d5205d33 ("powerpc: Add smp_mb() to arch_spin_is_locked()")
d86b8da04dfa ("arm64: spinlock: serialise spin_unlock_wait against concurrent lockers")
qspinlock suffers from the fact that the _Q_LOCKED_VAL store is
unordered inside the ACQUIRE of the lock.
And while this is not a problem for the regular mutual exclusive
critical section usage of spinlocks, it breaks creative locking like:
spin_lock(A) spin_lock(B)
spin_unlock_wait(B) if (!spin_is_locked(A))
do_something() do_something()
In that both CPUs can end up running do_something at the same time,
because our _Q_LOCKED_VAL store can drop past the spin_unlock_wait()
spin_is_locked() loads (even on x86!!).
To avoid making the normal case slower, add smp_mb()s to the less used
spin_unlock_wait() / spin_is_locked() side of things to avoid this
problem.
Reported-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Reported-by: Giovanni Gherdovich <ggherdovich@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/asm-generic/qspinlock.h | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
--- a/include/asm-generic/qspinlock.h
+++ b/include/asm-generic/qspinlock.h
@@ -28,7 +28,30 @@
*/
static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
{
- return atomic_read(&lock->val);
+ /*
+ * queued_spin_lock_slowpath() can ACQUIRE the lock before
+ * issuing the unordered store that sets _Q_LOCKED_VAL.
+ *
+ * See both smp_cond_acquire() sites for more detail.
+ *
+ * This however means that in code like:
+ *
+ * spin_lock(A) spin_lock(B)
+ * spin_unlock_wait(B) spin_is_locked(A)
+ * do_something() do_something()
+ *
+ * Both CPUs can end up running do_something() because the store
+ * setting _Q_LOCKED_VAL will pass through the loads in
+ * spin_unlock_wait() and/or spin_is_locked().
+ *
+ * Avoid this by issuing a full memory barrier between the spin_lock()
+ * and the loads in spin_unlock_wait() and spin_is_locked().
+ *
+ * Note that regular mutual exclusion doesn't care about this
+ * delayed store.
+ */
+ smp_mb();
+ return atomic_read(&lock->val) & _Q_LOCKED_MASK;
}
/**
@@ -108,6 +131,8 @@ static __always_inline void queued_spin_
*/
static inline void queued_spin_unlock_wait(struct qspinlock *lock)
{
+ /* See queued_spin_is_locked() */
+ smp_mb();
while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
cpu_relax();
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 72/87] clk: bcm2835: add locking to pll*_on/off methods
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 71/87] locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait() Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 73/87] watchdog: sp5100_tco: properly check for new register layouts Greg Kroah-Hartman
` (16 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Martin Sperl, Eric Anholt
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Sperl <kernel@martin.sperl.org>
commit ec36a5c6682fdd5328abf15c3c67281bed0241d7 upstream.
Add missing locking to:
* bcm2835_pll_divider_on
* bcm2835_pll_divider_off
to protect the read modify write cycle for the
register access protecting both cm_reg and a2w_reg
registers.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the
audio domain clocks")
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clk/bcm/clk-bcm2835.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1078,10 +1078,12 @@ static void bcm2835_pll_divider_off(stru
struct bcm2835_cprman *cprman = divider->cprman;
const struct bcm2835_pll_divider_data *data = divider->data;
+ spin_lock(&cprman->regs_lock);
cprman_write(cprman, data->cm_reg,
(cprman_read(cprman, data->cm_reg) &
~data->load_mask) | data->hold_mask);
cprman_write(cprman, data->a2w_reg, A2W_PLL_CHANNEL_DISABLE);
+ spin_unlock(&cprman->regs_lock);
}
static int bcm2835_pll_divider_on(struct clk_hw *hw)
@@ -1090,12 +1092,14 @@ static int bcm2835_pll_divider_on(struct
struct bcm2835_cprman *cprman = divider->cprman;
const struct bcm2835_pll_divider_data *data = divider->data;
+ spin_lock(&cprman->regs_lock);
cprman_write(cprman, data->a2w_reg,
cprman_read(cprman, data->a2w_reg) &
~A2W_PLL_CHANNEL_DISABLE);
cprman_write(cprman, data->cm_reg,
cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+ spin_unlock(&cprman->regs_lock);
return 0;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 73/87] watchdog: sp5100_tco: properly check for new register layouts
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 72/87] clk: bcm2835: add locking to pll*_on/off methods Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 74/87] mcb: Fixed bar number assignment for the gdd Greg Kroah-Hartman
` (15 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lucas Stach, Guenter Roeck, Wim Van Sebroeck
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas Stach <dev@lynxeye.de>
commit 46856fabe40cc80f92134683cdec7dc0fc8f4000 upstream.
Commits 190aa4304de6 (Add AMD Mullins platform support) and
cca118fa2a0a94 (Add AMD Carrizo platform support) enabled the
driver on a lot more devices, but the following commit missed
a single location in the code when checking if the SB800 register
offsets should be used. This leads to the wrong register being
written which in turn causes ACPI to go haywire.
Fix this by introducing a helper function to check for the new
register layout and use this consistently.
https://bugzilla.kernel.org/show_bug.cgi?id=114201
https://bugzilla.redhat.com/show_bug.cgi?id=1329910
Fixes: bdecfcdb5461 (sp5100_tco: fix the device check for SB800
and later chipsets)
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/watchdog/sp5100_tco.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -73,6 +73,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog can
/*
* Some TCO specific functions
*/
+
+static bool tco_has_sp5100_reg_layout(struct pci_dev *dev)
+{
+ return dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+ dev->revision < 0x40;
+}
+
static void tco_timer_start(void)
{
u32 val;
@@ -129,7 +136,7 @@ static void tco_timer_enable(void)
{
int val;
- if (sp5100_tco_pci->revision >= 0x40) {
+ if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
/* For SB800 or later */
/* Set the Watchdog timer resolution to 1 sec */
outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
@@ -342,8 +349,7 @@ static unsigned char sp5100_tco_setupdev
/*
* Determine type of southbridge chipset.
*/
- if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
- sp5100_tco_pci->revision < 0x40) {
+ if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
dev_name = SP5100_DEVNAME;
index_reg = SP5100_IO_PM_INDEX_REG;
data_reg = SP5100_IO_PM_DATA_REG;
@@ -388,8 +394,7 @@ static unsigned char sp5100_tco_setupdev
* Secondly, Find the watchdog timer MMIO address
* from SBResource_MMIO register.
*/
- if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
- sp5100_tco_pci->revision < 0x40) {
+ if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
pci_read_config_dword(sp5100_tco_pci,
SP5100_SB_RESOURCE_MMIO_BASE, &val);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 74/87] mcb: Fixed bar number assignment for the gdd
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 73/87] watchdog: sp5100_tco: properly check for new register layouts Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 75/87] ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294 Greg Kroah-Hartman
` (14 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andreas Werner, Johannes Thumshirn
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Werner <andreas.werner@men.de>
commit f75564d343010b025301d9548f2304f48eb25f01 upstream.
The bar number is found in reg2 within the gdd. Therefore
we need to change the assigment from reg1 to reg2 which
is the correct location.
Signed-off-by: Andreas Werner <andreas.werner@men.de>
Fixes: '3764e82e5' drivers: Introduce MEN Chameleon Bus
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mcb/mcb-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -57,7 +57,7 @@ static int chameleon_parse_gdd(struct mc
mdev->id = GDD_DEV(reg1);
mdev->rev = GDD_REV(reg1);
mdev->var = GDD_VAR(reg1);
- mdev->bar = GDD_BAR(reg1);
+ mdev->bar = GDD_BAR(reg2);
mdev->group = GDD_GRP(reg2);
mdev->inst = GDD_INS(reg2);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 75/87] ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 74/87] mcb: Fixed bar number assignment for the gdd Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 76/87] ALSA: hda - Fix headphone noise on Dell XPS 13 9360 Greg Kroah-Hartman
` (13 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kailang Yang, Takashi Iwai
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kailang Yang <kailang@realtek.com>
commit dcd4f0db6141d6bf2cb897309d5d6f53d1b1696f upstream.
Support new codecs for ALC234/ALC274/ALC294.
This three codecs was the same IC.
But bonding is not the same.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -342,6 +342,11 @@ static void alc_fill_eapd_coef(struct hd
case 0x10ec0293:
alc_update_coef_idx(codec, 0xa, 1<<13, 0);
break;
+ case 0x10ec0234:
+ case 0x10ec0274:
+ case 0x10ec0294:
+ alc_update_coef_idx(codec, 0x10, 1<<15, 0);
+ break;
case 0x10ec0662:
if ((coef & 0x00f0) == 0x0030)
alc_update_coef_idx(codec, 0x4, 1<<10, 0); /* EAPD Ctrl */
@@ -2647,6 +2652,7 @@ enum {
ALC269_TYPE_ALC255,
ALC269_TYPE_ALC256,
ALC269_TYPE_ALC225,
+ ALC269_TYPE_ALC294,
};
/*
@@ -2677,6 +2683,7 @@ static int alc269_parse_auto_config(stru
case ALC269_TYPE_ALC255:
case ALC269_TYPE_ALC256:
case ALC269_TYPE_ALC225:
+ case ALC269_TYPE_ALC294:
ssids = alc269_ssids;
break;
default:
@@ -6028,6 +6035,11 @@ static int patch_alc269(struct hda_codec
case 0x10ec0225:
spec->codec_variant = ALC269_TYPE_ALC225;
break;
+ case 0x10ec0234:
+ case 0x10ec0274:
+ case 0x10ec0294:
+ spec->codec_variant = ALC269_TYPE_ALC294;
+ break;
}
if (snd_hda_codec_read(codec, 0x51, 0, AC_VERB_PARAMETERS, 0) == 0x10ec5505) {
@@ -6942,6 +6954,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0225, "ALC225", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0231, "ALC231", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0233, "ALC233", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0234, "ALC234", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0235, "ALC233", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0255, "ALC255", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0256, "ALC256", patch_alc269),
@@ -6952,6 +6965,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0269, "ALC269", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0270, "ALC270", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0272, "ALC272", patch_alc662),
+ HDA_CODEC_ENTRY(0x10ec0274, "ALC274", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0275, "ALC275", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0276, "ALC276", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0280, "ALC280", patch_alc269),
@@ -6964,6 +6978,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0290, "ALC290", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0292, "ALC292", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0293, "ALC293", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0294, "ALC294", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0298, "ALC298", patch_alc269),
HDA_CODEC_REV_ENTRY(0x10ec0861, 0x100340, "ALC660", patch_alc861),
HDA_CODEC_ENTRY(0x10ec0660, "ALC660-VD", patch_alc861vd),
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 76/87] ALSA: hda - Fix headphone noise on Dell XPS 13 9360
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 75/87] ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294 Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 77/87] ALSA: hda/realtek - Add support for ALC295/ALC3254 Greg Kroah-Hartman
` (12 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Takashi Iwai
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <kaihengfeng@gmail.com>
commit 423cd785619ac6778252fbdb916505aa1c153959 upstream.
The headphone has noise when playing sound or switching microphone sources.
It uses the same codec on XPS 13 9350, but with different subsystem ID.
Applying the fixup can solve the issue.
Also, changing the model name to better differentiate models.
v2: Reorder by device ID.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5466,8 +5466,9 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC293_FIXUP_DISABLE_AAMIX_MULTIJACK),
- SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
+ SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13 9350", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
SND_PCI_QUIRK(0x1028, 0x0725, "Dell Inspiron 3162", ALC255_FIXUP_DELL_SPK_NOISE),
+ SND_PCI_QUIRK(0x1028, 0x075b, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 77/87] ALSA: hda/realtek - Add support for ALC295/ALC3254
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 76/87] ALSA: hda - Fix headphone noise on Dell XPS 13 9360 Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 78/87] ALSA: hda - Fix headset mic detection problem for one Dell machine Greg Kroah-Hartman
` (11 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kailang Yang, Takashi Iwai
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kailang Yang <kailang@realtek.com>
commit 7d727869c7b86da0874436ac5675dcdadaf3a0a1 upstream.
Add support for ALC295/ALC3254.
They are simply compatible with ALC225 chip.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -335,6 +335,7 @@ static void alc_fill_eapd_coef(struct hd
case 0x10ec0283:
case 0x10ec0286:
case 0x10ec0288:
+ case 0x10ec0295:
case 0x10ec0298:
alc_update_coef_idx(codec, 0x10, 1<<9, 0);
break;
@@ -907,6 +908,7 @@ static struct alc_codec_rename_pci_table
{ 0x10ec0298, 0x1028, 0, "ALC3266" },
{ 0x10ec0256, 0x1028, 0, "ALC3246" },
{ 0x10ec0225, 0x1028, 0, "ALC3253" },
+ { 0x10ec0295, 0x1028, 0, "ALC3254" },
{ 0x10ec0670, 0x1025, 0, "ALC669X" },
{ 0x10ec0676, 0x1025, 0, "ALC679X" },
{ 0x10ec0282, 0x1043, 0, "ALC3229" },
@@ -3697,6 +3699,7 @@ static void alc_headset_mode_unplugged(s
alc_process_coef_fw(codec, coef0668);
break;
case 0x10ec0225:
+ case 0x10ec0295:
alc_process_coef_fw(codec, coef0225);
break;
}
@@ -3797,6 +3800,7 @@ static void alc_headset_mode_mic_in(stru
snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50);
break;
case 0x10ec0225:
+ case 0x10ec0295:
alc_update_coef_idx(codec, 0x45, 0x3f<<10, 0x31<<10);
snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
alc_process_coef_fw(codec, coef0225);
@@ -3854,6 +3858,7 @@ static void alc_headset_mode_default(str
switch (codec->core.vendor_id) {
case 0x10ec0225:
+ case 0x10ec0295:
alc_process_coef_fw(codec, coef0225);
break;
case 0x10ec0255:
@@ -3957,6 +3962,7 @@ static void alc_headset_mode_ctia(struct
alc_process_coef_fw(codec, coef0688);
break;
case 0x10ec0225:
+ case 0x10ec0295:
alc_process_coef_fw(codec, coef0225);
break;
}
@@ -4038,6 +4044,7 @@ static void alc_headset_mode_omtp(struct
alc_process_coef_fw(codec, coef0688);
break;
case 0x10ec0225:
+ case 0x10ec0295:
alc_process_coef_fw(codec, coef0225);
break;
}
@@ -4121,6 +4128,7 @@ static void alc_determine_headset_type(s
is_ctia = (val & 0x1c02) == 0x1c02;
break;
case 0x10ec0225:
+ case 0x10ec0295:
alc_process_coef_fw(codec, coef0225);
msleep(800);
val = alc_read_coef_idx(codec, 0x46);
@@ -6034,6 +6042,7 @@ static int patch_alc269(struct hda_codec
alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
break;
case 0x10ec0225:
+ case 0x10ec0295:
spec->codec_variant = ALC269_TYPE_ALC225;
break;
case 0x10ec0234:
@@ -6980,6 +6989,7 @@ static const struct hda_device_id snd_hd
HDA_CODEC_ENTRY(0x10ec0292, "ALC292", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0293, "ALC293", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0294, "ALC294", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0295, "ALC295", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0298, "ALC298", patch_alc269),
HDA_CODEC_REV_ENTRY(0x10ec0861, 0x100340, "ALC660", patch_alc861),
HDA_CODEC_ENTRY(0x10ec0660, "ALC660-VD", patch_alc861vd),
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 78/87] ALSA: hda - Fix headset mic detection problem for one Dell machine
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 77/87] ALSA: hda/realtek - Add support for ALC295/ALC3254 Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 79/87] IB/srp: Fix a debug kernel crash Greg Kroah-Hartman
` (10 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Hui Wang, Takashi Iwai
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Wang <hui.wang@canonical.com>
commit 86c72d1ce91d804e4fa8d90b316a89597dd220f1 upstream.
Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5720,6 +5720,9 @@ static const struct snd_hda_pin_quirk al
{0x14, 0x90170110},
{0x21, 0x02211020}),
SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x14, 0x90170130},
+ {0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
{0x12, 0x90a60140},
{0x14, 0x90170110},
{0x21, 0x02211020}),
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 79/87] IB/srp: Fix a debug kernel crash
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 78/87] ALSA: hda - Fix headset mic detection problem for one Dell machine Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 80/87] thunderbolt: Fix double free of drom buffer Greg Kroah-Hartman
` (9 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bart Van Assche, Sagi Grimberg,
Christoph Hellwig, Max Gurtovoy, Doug Ledford
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <bart.vanassche@sandisk.com>
commit 54f5c9c52d69afa55abf2b034df8d45f588466c3 upstream.
Avoid that the following BUG() is triggered against a debug
kernel:
kernel BUG at include/linux/scatterlist.h:92!
RIP: 0010:[<ffffffffa0467199>] [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp]
Call Trace:
[<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp]
[<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp]
[<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180
[<ffffffff813f8b07>] scsi_request_fn+0x477/0x610
[<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40
[<ffffffff81299070>] blk_delay_work+0x20/0x30
[<ffffffff81071f07>] process_one_work+0x197/0x480
[<ffffffff81072239>] worker_thread+0x49/0x490
[<ffffffff810787ea>] kthread+0xea/0x100
[<ffffffff8159b632>] ret_from_fork+0x22/0x40
Fixes: f7f7aab1a5c0 ("IB/srp: Convert to new registration API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1541,7 +1541,7 @@ static int srp_map_idb(struct srp_rdma_c
if (dev->use_fast_reg) {
state.sg = idb_sg;
- sg_set_buf(idb_sg, req->indirect_desc, idb_len);
+ sg_init_one(idb_sg, req->indirect_desc, idb_len);
idb_sg->dma_address = req->indirect_dma_addr; /* hack! */
#ifdef CONFIG_NEED_SG_DMA_LENGTH
idb_sg->dma_length = idb_sg->length; /* hack^2 */
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 80/87] thunderbolt: Fix double free of drom buffer
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 79/87] IB/srp: Fix a debug kernel crash Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 81/87] SIGNAL: Move generic copy_siginfo() to signal.h Greg Kroah-Hartman
` (8 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andreas Noever, Bjorn Helgaas, Lukas Wunner
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Noever <andreas.noever@gmail.com>
commit 2ffa9a5d76a75abbc1f95c17959fced666095bdd upstream.
If tb_drom_read() fails, sw->drom is freed but not set to NULL. sw->drom
is then freed again in the error path of tb_switch_alloc().
The bug can be triggered by unplugging a thunderbolt device shortly after
it is detected by the thunderbolt driver.
Clear sw->drom if tb_drom_read() fails.
[bhelgaas: add Fixes:, stable versions of interest]
Fixes: 343fcb8c70d7 ("thunderbolt: Fix nontrivial endpoint devices.")
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/eeprom.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/thunderbolt/eeprom.c
+++ b/drivers/thunderbolt/eeprom.c
@@ -444,6 +444,7 @@ int tb_drom_read(struct tb_switch *sw)
return tb_drom_parse_entries(sw);
err:
kfree(sw->drom);
+ sw->drom = NULL;
return -EIO;
}
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 81/87] SIGNAL: Move generic copy_siginfo() to signal.h
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 80/87] thunderbolt: Fix double free of drom buffer Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 82/87] UBI: Fix static volume checks when Fastmap is used Greg Kroah-Hartman
` (7 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Arnd Bergmann,
Ralf Baechle, Petr Malat, Tony Luck, Fenghua Yu,
Christopher Ferris, linux-arch, linux-mips, linux-ia64
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit ca9eb49aa9562eaadf3cea071ec7018ad6800425 upstream.
The generic copy_siginfo() is currently defined in
asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which
defines the generic struct siginfo. However this makes it awkward for an
architecture to use it if it has to define its own struct siginfo (e.g.
MIPS and potentially IA64), since it means that asm-generic/siginfo.h
can only be included after defining the arch-specific siginfo, which may
be problematic if the arch-specific definition needs definitions from
uapi/asm-generic/siginfo.h.
It is possible to work around this by first including
uapi/asm-generic/siginfo.h to get the constants before defining the
arch-specific siginfo, and include asm-generic/siginfo.h after. However
uapi headers can't be included by other uapi headers, so that first
include has to be in an ifdef __kernel__, with the non __kernel__ case
including the non-UAPI header instead.
Instead of that mess, move the generic copy_siginfo() definition into
linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to
include asm-generic/siginfo.h and define the arch-specific siginfo, and
for the generic copy_siginfo() to see that arch-specific definition.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Petr Malat <oss@malat.biz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/asm-generic/siginfo.h | 15 ---------------
include/linux/signal.h | 15 +++++++++++++++
2 files changed, 15 insertions(+), 15 deletions(-)
--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -17,21 +17,6 @@
struct siginfo;
void do_schedule_next_timer(struct siginfo *info);
-#ifndef HAVE_ARCH_COPY_SIGINFO
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
- if (from->si_code < 0)
- memcpy(to, from, sizeof(*to));
- else
- /* _sigchld is currently the largest know union member */
- memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-}
-
-#endif
-
extern int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
#endif
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -28,6 +28,21 @@ struct sigpending {
sigset_t signal;
};
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(*to));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
/*
* Define some primitives to manipulate sigset_t.
*/
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 82/87] UBI: Fix static volume checks when Fastmap is used
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 81/87] SIGNAL: Move generic copy_siginfo() to signal.h Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 83/87] hpfs: fix remount failure when there are no options changed Greg Kroah-Hartman
` (6 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ezequiel Garcia, Richard Weinberger
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <richard@nod.at>
commit 1900149c835ab5b48bea31a823ea5e5a401fb560 upstream.
Ezequiel reported that he's facing UBI going into read-only
mode after power cut. It turned out that this behavior happens
only when updating a static volume is interrupted and Fastmap is
used.
A possible trace can look like:
ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes
ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode
CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4
Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012
0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841
ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6
ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0
Call Trace:
[<ffffffff8140d841>] dump_stack+0x63/0x82
[<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi]
[<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi]
[<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi]
[<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi]
[<ffffffff8124b08e>] chrdev_open+0xae/0x1d0
[<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300
[<ffffffff8124afe0>] ? cdev_put+0x30/0x30
[<ffffffff81244d36>] vfs_open+0x56/0x60
[<ffffffff812545f4>] path_openat+0x4f4/0x1190
[<ffffffff81256621>] do_filp_open+0x91/0x100
[<ffffffff81263547>] ? __alloc_fd+0xc7/0x190
[<ffffffff812450df>] do_sys_open+0x13f/0x210
[<ffffffff812451ce>] SyS_open+0x1e/0x20
[<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4
UBI checks static volumes for data consistency and reads the
whole volume upon first open. If the volume is found erroneous
users of UBI cannot read from it, but another volume update is
possible to fix it. The check is performed by running
ubi_eba_read_leb() on every allocated LEB of the volume.
For static volumes ubi_eba_read_leb() computes the checksum of all
data stored in a LEB. To verify the computed checksum it has to read
the LEB's volume header which stores the original checksum.
If the volume header is not found UBI treats this as fatal internal
error and switches to RO mode. If the UBI device was attached via a
full scan the assumption is correct, the volume header has to be
present as it had to be there while scanning to get known as mapped.
If the attach operation happened via Fastmap the assumption is no
longer correct. When attaching via Fastmap UBI learns the mapping
table from Fastmap's snapshot of the system state and not via a full
scan. It can happen that a LEB got unmapped after a Fastmap was
written to the flash. Then UBI can learn the LEB still as mapped and
accessing it returns only 0xFF bytes. As UBI is not a FTL it is
allowed to have mappings to empty PEBs, it assumes that the layer
above takes care of LEB accounting and referencing.
UBIFS does so using the LEB property tree (LPT).
For static volumes UBI blindly assumes that all LEBs are present and
therefore special actions have to be taken.
The described situation can happen when updating a static volume is
interrupted, either by a user or a power cut.
The volume update code first unmaps all LEBs of a volume and then
writes LEB by LEB. If the sequence of operations is interrupted UBI
detects this either by the absence of LEBs, no volume header present
at scan time, or corrupted payload, detected via checksum.
In the Fastmap case the former method won't trigger as no scan
happened and UBI automatically thinks all LEBs are present.
Only by reading data from a LEB it detects that the volume header is
missing and incorrectly treats this as fatal error.
To deal with the situation ubi_eba_read_leb() from now on checks
whether we attached via Fastmap and handles the absence of a
volume header like a data corruption error.
This way interrupted static volume updates will correctly get detected
also when Fastmap is used.
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/ubi/eba.c | 21 +++++++++++++++++++--
drivers/mtd/ubi/fastmap.c | 1 +
drivers/mtd/ubi/ubi.h | 2 ++
3 files changed, 22 insertions(+), 2 deletions(-)
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -426,8 +426,25 @@ retry:
pnum, vol_id, lnum);
err = -EBADMSG;
} else {
- err = -EINVAL;
- ubi_ro_mode(ubi);
+ /*
+ * Ending up here in the non-Fastmap case
+ * is a clear bug as the VID header had to
+ * be present at scan time to have it referenced.
+ * With fastmap the story is more complicated.
+ * Fastmap has the mapping info without the need
+ * of a full scan. So the LEB could have been
+ * unmapped, Fastmap cannot know this and keeps
+ * the LEB referenced.
+ * This is valid and works as the layer above UBI
+ * has to do bookkeeping about used/referenced
+ * LEBs in any case.
+ */
+ if (ubi->fast_attach) {
+ err = -EBADMSG;
+ } else {
+ err = -EINVAL;
+ ubi_ro_mode(ubi);
+ }
}
}
goto out_free;
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -1058,6 +1058,7 @@ int ubi_scan_fastmap(struct ubi_device *
ubi_msg(ubi, "fastmap WL pool size: %d",
ubi->fm_wl_pool.max_size);
ubi->fm_disabled = 0;
+ ubi->fast_attach = 1;
ubi_free_vid_hdr(ubi, vh);
kfree(ech);
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -462,6 +462,7 @@ struct ubi_debug_info {
* @fm_eba_sem: allows ubi_update_fastmap() to block EBA table changes
* @fm_work: fastmap work queue
* @fm_work_scheduled: non-zero if fastmap work was scheduled
+ * @fast_attach: non-zero if UBI was attached by fastmap
*
* @used: RB-tree of used physical eraseblocks
* @erroneous: RB-tree of erroneous used physical eraseblocks
@@ -570,6 +571,7 @@ struct ubi_device {
size_t fm_size;
struct work_struct fm_work;
int fm_work_scheduled;
+ int fast_attach;
/* Wear-leveling sub-system's stuff */
struct rb_root used;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 83/87] hpfs: fix remount failure when there are no options changed
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 82/87] UBI: Fix static volume checks when Fastmap is used Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 84/87] hpfs: implement the show_options method Greg Kroah-Hartman
` (5 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Linus Torvalds
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mikulas@twibright.com>
commit 44d51706b4685f965cd32acde3fe0fcc1e6198e8 upstream.
Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.
However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL. In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists. The mount syscall then fails with
ENOMEM.
This patch fixes the bug. We fail with ENOMEM only if data is non-NULL.
The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).
Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hpfs/super.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -455,7 +455,7 @@ static int hpfs_remount_fs(struct super_
struct hpfs_sb_info *sbi = hpfs_sb(s);
char *new_opts = kstrdup(data, GFP_KERNEL);
- if (!new_opts)
+ if (data && !new_opts)
return -ENOMEM;
sync_filesystem(s);
@@ -493,7 +493,8 @@ static int hpfs_remount_fs(struct super_
if (!(*flags & MS_RDONLY)) mark_dirty(s, 1);
- replace_mount_options(s, new_opts);
+ if (new_opts)
+ replace_mount_options(s, new_opts);
hpfs_unlock(s);
return 0;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 84/87] hpfs: implement the show_options method
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 83/87] hpfs: fix remount failure when there are no options changed Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 85/87] scsi: Add intermediate STARGET_REMOVE state to scsi_target_state Greg Kroah-Hartman
` (4 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Linus Torvalds
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mikulas@twibright.com>
commit 037369b872940cd923835a0a589763180c4a36bc upstream.
The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts. However, there is a problem that the options
may disappear after remount. If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.
To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hpfs/super.c | 43 ++++++++++++++++++++++++++++++++-----------
1 file changed, 32 insertions(+), 11 deletions(-)
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -15,6 +15,7 @@
#include <linux/sched.h>
#include <linux/bitmap.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
/* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
@@ -453,10 +454,6 @@ static int hpfs_remount_fs(struct super_
int lowercase, eas, chk, errs, chkdsk, timeshift;
int o;
struct hpfs_sb_info *sbi = hpfs_sb(s);
- char *new_opts = kstrdup(data, GFP_KERNEL);
-
- if (data && !new_opts)
- return -ENOMEM;
sync_filesystem(s);
@@ -493,18 +490,44 @@ static int hpfs_remount_fs(struct super_
if (!(*flags & MS_RDONLY)) mark_dirty(s, 1);
- if (new_opts)
- replace_mount_options(s, new_opts);
-
hpfs_unlock(s);
return 0;
out_err:
hpfs_unlock(s);
- kfree(new_opts);
return -EINVAL;
}
+static int hpfs_show_options(struct seq_file *seq, struct dentry *root)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(root->d_sb);
+
+ seq_printf(seq, ",uid=%u", from_kuid_munged(&init_user_ns, sbi->sb_uid));
+ seq_printf(seq, ",gid=%u", from_kgid_munged(&init_user_ns, sbi->sb_gid));
+ seq_printf(seq, ",umask=%03o", (~sbi->sb_mode & 0777));
+ if (sbi->sb_lowercase)
+ seq_printf(seq, ",case=lower");
+ if (!sbi->sb_chk)
+ seq_printf(seq, ",check=none");
+ if (sbi->sb_chk == 2)
+ seq_printf(seq, ",check=strict");
+ if (!sbi->sb_err)
+ seq_printf(seq, ",errors=continue");
+ if (sbi->sb_err == 2)
+ seq_printf(seq, ",errors=panic");
+ if (!sbi->sb_chkdsk)
+ seq_printf(seq, ",chkdsk=no");
+ if (sbi->sb_chkdsk == 2)
+ seq_printf(seq, ",chkdsk=always");
+ if (!sbi->sb_eas)
+ seq_printf(seq, ",eas=no");
+ if (sbi->sb_eas == 1)
+ seq_printf(seq, ",eas=ro");
+ if (sbi->sb_timeshift)
+ seq_printf(seq, ",timeshift=%d", sbi->sb_timeshift);
+ return 0;
+}
+
/* Super operations */
static const struct super_operations hpfs_sops =
@@ -515,7 +538,7 @@ static const struct super_operations hpf
.put_super = hpfs_put_super,
.statfs = hpfs_statfs,
.remount_fs = hpfs_remount_fs,
- .show_options = generic_show_options,
+ .show_options = hpfs_show_options,
};
static int hpfs_fill_super(struct super_block *s, void *options, int silent)
@@ -538,8 +561,6 @@ static int hpfs_fill_super(struct super_
int o;
- save_mount_options(s, options);
-
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi) {
return -ENOMEM;
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 85/87] scsi: Add intermediate STARGET_REMOVE state to scsi_target_state
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 84/87] hpfs: implement the show_options method Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 86/87] Revert "scsi: fix soft lockup in scsi_remove_target() on module removal" Greg Kroah-Hartman
` (3 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johannes Thumshirn,
Sergey Senozhatsky, Ewan D. Milne, Hannes Reinecke,
James Bottomley, Martin K. Petersen
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Thumshirn <jthumshirn@suse.de>
commit f05795d3d771f30a7bdc3a138bf714b06d42aa95 upstream.
Add intermediate STARGET_REMOVE state to scsi_target_state to avoid
running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE
state is only valid in the path from scsi_remove_target() to
scsi_target_destroy() indicating this target is going to be removed.
This re-fixes the problem introduced in commits bc3f02a795d3 ("[SCSI]
scsi_remove_target: fix softlockup regression on hot remove") and
40998193560d ("scsi: restart list search after unlock in
scsi_remove_target") in a more comprehensive way.
[mkp: Included James' fix for scsi_target_destroy()]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/scsi_scan.c | 1 +
drivers/scsi/scsi_sysfs.c | 2 ++
include/scsi/scsi_device.h | 1 +
3 files changed, 4 insertions(+)
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -315,6 +315,7 @@ static void scsi_target_destroy(struct s
struct Scsi_Host *shost = dev_to_shost(dev->parent);
unsigned long flags;
+ BUG_ON(starget->state == STARGET_DEL);
starget->state = STARGET_DEL;
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1279,11 +1279,13 @@ restart:
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL ||
+ starget->state == STARGET_REMOVE ||
starget == last_target)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
kref_get(&starget->reap_ref);
last_target = starget;
+ starget->state = STARGET_REMOVE;
spin_unlock_irqrestore(shost->host_lock, flags);
__scsi_remove_target(starget);
scsi_target_reap(starget);
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -240,6 +240,7 @@ scmd_printk(const char *, const struct s
enum scsi_target_state {
STARGET_CREATED = 1,
STARGET_RUNNING,
+ STARGET_REMOVE,
STARGET_DEL,
};
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 86/87] Revert "scsi: fix soft lockup in scsi_remove_target() on module removal"
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 85/87] scsi: Add intermediate STARGET_REMOVE state to scsi_target_state Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-05-30 20:50 ` [PATCH 4.5 87/87] kbuild: move -Wunused-const-variable to W=1 warning level Greg Kroah-Hartman
` (2 subsequent siblings)
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Johannes Thumshirn, Ewan D. Milne,
Hannes Reinecke, Martin K. Petersen
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Thumshirn <jthumshirn@suse.de>
commit 305c2e71b3d733ec065cb716c76af7d554bd5571 upstream.
Now that we've done a more comprehensive fix with the intermediate
target state we can remove the previous hack introduced with commit
90a88d6ef88e ("scsi: fix soft lockup in scsi_remove_target() on module
removal").
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/scsi_sysfs.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1272,19 +1272,17 @@ static void __scsi_remove_target(struct
void scsi_remove_target(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev->parent);
- struct scsi_target *starget, *last_target = NULL;
+ struct scsi_target *starget;
unsigned long flags;
restart:
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL ||
- starget->state == STARGET_REMOVE ||
- starget == last_target)
+ starget->state == STARGET_REMOVE)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
kref_get(&starget->reap_ref);
- last_target = starget;
starget->state = STARGET_REMOVE;
spin_unlock_irqrestore(shost->host_lock, flags);
__scsi_remove_target(starget);
^ permalink raw reply [flat|nested] 82+ messages in thread* [PATCH 4.5 87/87] kbuild: move -Wunused-const-variable to W=1 warning level
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 86/87] Revert "scsi: fix soft lockup in scsi_remove_target() on module removal" Greg Kroah-Hartman
@ 2016-05-30 20:50 ` Greg Kroah-Hartman
2016-06-01 5:26 ` [PATCH 4.5 00/87] 4.5.6-stable review Guenter Roeck
2016-06-01 14:21 ` Shuah Khan
80 siblings, 0 replies; 82+ messages in thread
From: Greg Kroah-Hartman @ 2016-05-30 20:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Olof Johansson,
Lee Jones, Michal Marek
4.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
commit c9c6837d39311b0cc14cdbe7c18e815ab44aefb1 upstream.
gcc-6 started warning by default about variables that are not
used anywhere and that are marked 'const', generating many
false positives in an allmodconfig build, e.g.:
arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=]
arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=]
drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=]
drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=]
drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=]
drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=]
This is similar to the existing -Wunused-but-set-variable warning
that was added in an earlier release and that we disable by default
now and only enable when W=1 is set, so it makes sense to do
the same here. Once we have eliminated the majority of the
warnings for both, we can put them back into the default list.
We probably want this in backport kernels as well, to allow building
them with gcc-6 without introducing extra warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Makefile | 5 +++--
scripts/Makefile.extrawarn | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -688,9 +688,10 @@ KBUILD_CFLAGS += $(call cc-option, -mno-
KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
else
-# This warning generated too much noise in a regular build.
-# Use make W=1 to enable this warning (see scripts/Makefile.build)
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.build)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
endif
ifdef CONFIG_FRAME_POINTER
--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -24,6 +24,7 @@ warning-1 += $(call cc-option, -Wmissing
warning-1 += -Wold-style-definition
warning-1 += $(call cc-option, -Wmissing-include-dirs)
warning-1 += $(call cc-option, -Wunused-but-set-variable)
+warning-1 += $(call cc-option, -Wunused-const-variable)
warning-1 += $(call cc-disable-warning, missing-field-initializers)
warning-1 += $(call cc-disable-warning, sign-compare)
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH 4.5 00/87] 4.5.6-stable review
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2016-05-30 20:50 ` [PATCH 4.5 87/87] kbuild: move -Wunused-const-variable to W=1 warning level Greg Kroah-Hartman
@ 2016-06-01 5:26 ` Guenter Roeck
2016-06-01 14:21 ` Shuah Khan
80 siblings, 0 replies; 82+ messages in thread
From: Guenter Roeck @ 2016-06-01 5:26 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, shuah.kh, patches, stable
On 05/30/2016 01:48 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.5.6 release.
> There are 87 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Jun 1 20:49:14 UTC 2016.
> Anything received after that time might be too late.
>
Build results:
total: 149 pass: 149 fail: 0
Qemu test results:
total: 108 pass: 108 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
^ permalink raw reply [flat|nested] 82+ messages in thread* Re: [PATCH 4.5 00/87] 4.5.6-stable review
2016-05-30 20:48 [PATCH 4.5 00/87] 4.5.6-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2016-06-01 5:26 ` [PATCH 4.5 00/87] 4.5.6-stable review Guenter Roeck
@ 2016-06-01 14:21 ` Shuah Khan
80 siblings, 0 replies; 82+ messages in thread
From: Shuah Khan @ 2016-06-01 14:21 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah.kh, patches, stable
On 05/30/2016 02:48 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.5.6 release.
> There are 87 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Jun 1 20:49:14 UTC 2016.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.5.6-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 82+ messages in thread