[PATCH v3 00/06] iommu/ipmmu-vmsa: IPMMU multi-arch update V3

[PATCH v3 00/06] iommu/ipmmu-vmsa: IPMMU multi-arch update V3

[Magnus Damm]

iommu/ipmmu-vmsa: IPMMU multi-arch update V3

[PATCH v3 01/06] iommu/ipmmu-vmsa: Remove platform data handling
[PATCH v3 02/06] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context
[PATCH v3 03/06] iommu/ipmmu-vmsa: Break out utlb parsing code
[PATCH v3 04/06] iommu/ipmmu-vmsa: Break out domain allocation code
[PATCH v3 05/06] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
[PATCH v3 06/06] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency

These patches update the IPMMU driver with a couple of changes
to support build on multiple architectures. In the process of
doing so the interrupt code gets reworked and the foundation
for supporting multiple contexts are added.

In this version of the series the patch order has been reworked
to make simplify review. Thanks to Laurent for his suggestions!

The 32-bit ARM logic has intentionally been changed as little as possible
to avoid breakage. Once CONFIG_IOMMU_DMA can be used it may be good time
to revisit the init ordering for the 32-bit SoCs. There is room for
improvement for sure like Robin Murphy kindly pointed out.

Changes since V2:
 - Got rid of patch 3 from the V2 however patch 1, 2 and 4 are kept.
 - V3 patch 3, 4 and 5 come from
   [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
 - Patch 5 has been reworked to include patch 3 of the V1 of this series 

Changes since V1:
 - Got rid of patch 2 and 3 from initial series
 - Updated bitmap code locking and also used lighter bitop functions
 - Updated the Kconfig bits to apply on top of ARCH_RENESAS

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Built on top of next-20160602

 drivers/iommu/Kconfig      |    1 
 drivers/iommu/ipmmu-vmsa.c |  263 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 216 insertions(+), 48 deletions(-)

[PATCH v3 01/06] iommu/ipmmu-vmsa: Remove platform data handling

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

The IPMMU driver is using DT these days, and platform data is no longer
used by the driver. Remove unused code.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---

 Changes since V2:
 - None

 Changes since V1:
 - Added Reviewed-by from Laurent

 drivers/iommu/ipmmu-vmsa.c |    5 -----
 1 file changed, 5 deletions(-)

--- 0001/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2016-06-02 20:43:14.090607110 +0900
@@ -766,11 +766,6 @@ static int ipmmu_probe(struct platform_d
 	int irq;
 	int ret;
 
-	if (!IS_ENABLED(CONFIG_OF) && !pdev->dev.platform_data) {
-		dev_err(&pdev->dev, "missing platform data\n");
-		return -EINVAL;
-	}
-
 	mmu = devm_kzalloc(&pdev->dev, sizeof(*mmu), GFP_KERNEL);
 	if (!mmu) {
 		dev_err(&pdev->dev, "cannot allocate device data\n");

[PATCH v3 02/06] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

Introduce a bitmap for context handing and convert the
interrupt routine to handle all registered contexts.

At this point the number of contexts are still limited.

Also remove the use of the ARM specific mapping variable
from ipmmu_irq() to allow compile on ARM64.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Changes since V2: (Thanks again to Laurent!)
 - Introduce a spinlock together with the bitmap and domain array.
 - Break out code into separate functions for alloc and free.
 - Perform free after (instead of before) configuring hardware registers.
 - Use the spinlock to protect the domain array in the interrupt handler.

 Changes since V1: (Thanks to Laurent for feedback!)
 - Use simple find_first_zero()/set_bit()/clear_bit() for context management.
 - For allocation rely on spinlock held when calling ipmmu_domain_init_context()
 - For test/free use atomic bitops
 - Return IRQ_HANDLED if any of the contexts generated interrupts

 drivers/iommu/ipmmu-vmsa.c |   76 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 66 insertions(+), 10 deletions(-)

--- 0002/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2016-06-02 21:10:37.350607110 +0900
@@ -8,6 +8,7 @@
  * the Free Software Foundation; version 2 of the License.
  */
 
+#include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
@@ -26,12 +27,17 @@
 
 #include "io-pgtable.h"
 
+#define IPMMU_CTX_MAX 1
+
 struct ipmmu_vmsa_device {
 	struct device *dev;
 	void __iomem *base;
 	struct list_head list;
 
 	unsigned int num_utlbs;
+	spinlock_t lock;			/* Protects ctx and domains[] */
+	DECLARE_BITMAP(ctx, IPMMU_CTX_MAX);
+	struct ipmmu_vmsa_domain *domains[IPMMU_CTX_MAX];
 
 	struct dma_iommu_mapping *mapping;
 };
@@ -293,9 +299,29 @@ static struct iommu_gather_ops ipmmu_gat
  * Domain/Context Management
  */
 
+static int ipmmu_domain_allocate_context(struct ipmmu_vmsa_device *mmu,
+					 struct ipmmu_vmsa_domain *domain)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&mmu->lock, flags);
+
+	ret = find_first_zero_bit(mmu->ctx, IPMMU_CTX_MAX);
+	if (ret != IPMMU_CTX_MAX) {
+		mmu->domains[ret] = domain;
+		set_bit(ret, mmu->ctx);
+	}
+
+	spin_unlock_irqrestore(&mmu->lock, flags);
+
+	return ret;
+}
+
 static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
 {
 	u64 ttbr;
+	int ret;
 
 	/*
 	 * Allocate the page table operations.
@@ -325,10 +351,15 @@ static int ipmmu_domain_init_context(str
 		return -EINVAL;
 
 	/*
-	 * TODO: When adding support for multiple contexts, find an unused
-	 * context.
+	 * Find an unused context.
 	 */
-	domain->context_id = 0;
+	ret = ipmmu_domain_allocate_context(domain->mmu, domain);
+	if (ret == IPMMU_CTX_MAX) {
+		free_io_pgtable_ops(domain->iop);
+		return -EBUSY;
+	}
+
+	domain->context_id = ret;
 
 	/* TTBR0 */
 	ttbr = domain->cfg.arm_lpae_s1_cfg.ttbr[0];
@@ -370,6 +401,19 @@ static int ipmmu_domain_init_context(str
 	return 0;
 }
 
+static void ipmmu_domain_free_context(struct ipmmu_vmsa_device *mmu,
+				      unsigned int context_id)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mmu->lock, flags);
+
+	clear_bit(context_id, mmu->ctx);
+	mmu->domains[context_id] = NULL;
+
+	spin_unlock_irqrestore(&mmu->lock, flags);
+}
+
 static void ipmmu_domain_destroy_context(struct ipmmu_vmsa_domain *domain)
 {
 	/*
@@ -380,6 +424,7 @@ static void ipmmu_domain_destroy_context
 	 */
 	ipmmu_ctx_write(domain, IMCTR, IMCTR_FLUSH);
 	ipmmu_tlb_sync(domain);
+	ipmmu_domain_free_context(domain->mmu, domain->context_id);
 }
 
 /* -----------------------------------------------------------------------------
@@ -437,16 +482,25 @@ static irqreturn_t ipmmu_domain_irq(stru
 static irqreturn_t ipmmu_irq(int irq, void *dev)
 {
 	struct ipmmu_vmsa_device *mmu = dev;
-	struct iommu_domain *io_domain;
-	struct ipmmu_vmsa_domain *domain;
+	irqreturn_t status = IRQ_NONE;
+	unsigned int i;
+	unsigned long flags;
 
-	if (!mmu->mapping)
-		return IRQ_NONE;
+	spin_lock_irqsave(&mmu->lock, flags);
+
+	/*
+	 * Check interrupts for all active contexts.
+	 */
+	for (i = 0; i < IPMMU_CTX_MAX; i++) {
+		if (!mmu->domains[i])
+			continue;
+		if (ipmmu_domain_irq(mmu->domains[i]) == IRQ_HANDLED)
+			status = IRQ_HANDLED;
+	}
 
-	io_domain = mmu->mapping->domain;
-	domain = to_vmsa_domain(io_domain);
+	spin_unlock_irqrestore(&mmu->lock, flags);
 
-	return ipmmu_domain_irq(domain);
+	return status;
 }
 
 /* -----------------------------------------------------------------------------
@@ -774,6 +828,8 @@ static int ipmmu_probe(struct platform_d
 
 	mmu->dev = &pdev->dev;
 	mmu->num_utlbs = 32;
+	spin_lock_init(&mmu->lock);
+	bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
 
 	/* Map I/O memory and request IRQ. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

[PATCH v3 03/06] iommu/ipmmu-vmsa: Break out utlb parsing code

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

Break out the utlb parsing code and dev_data allocation into a
separate function. This is preparation for future code sharing.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Changes since V2:
 - Included this new patch from the following series:
   [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
 - Reworked code to fit on top on previous two patches in current series.

 drivers/iommu/ipmmu-vmsa.c |   58 ++++++++++++++++++++++++++++----------------
 1 file changed, 38 insertions(+), 20 deletions(-)

--- 0004/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2016-06-02 21:23:51.700607110 +0900
@@ -647,22 +647,16 @@ static int ipmmu_find_utlbs(struct ipmmu
 	return 0;
 }
 
-static int ipmmu_add_device(struct device *dev)
+static int ipmmu_init_platform_device(struct device *dev,
+				      struct iommu_group *group)
 {
 	struct ipmmu_vmsa_archdata *archdata;
 	struct ipmmu_vmsa_device *mmu;
-	struct iommu_group *group = NULL;
 	unsigned int *utlbs;
 	unsigned int i;
 	int num_utlbs;
 	int ret = -ENODEV;
 
-	if (dev->archdata.iommu) {
-		dev_warn(dev, "IOMMU driver already assigned to device %s\n",
-			 dev_name(dev));
-		return -EINVAL;
-	}
-
 	/* Find the master corresponding to the device. */
 
 	num_utlbs = of_count_phandle_with_args(dev->of_node, "iommus",
@@ -690,7 +684,7 @@ static int ipmmu_add_device(struct devic
 	spin_unlock(&ipmmu_devices_lock);
 
 	if (ret < 0)
-		return -ENODEV;
+		goto error;
 
 	for (i = 0; i < num_utlbs; ++i) {
 		if (utlbs[i] >= mmu->num_utlbs) {
@@ -699,6 +693,36 @@ static int ipmmu_add_device(struct devic
 		}
 	}
 
+	archdata = kzalloc(sizeof(*archdata), GFP_KERNEL);
+	if (!archdata) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	archdata->mmu = mmu;
+	archdata->utlbs = utlbs;
+	archdata->num_utlbs = num_utlbs;
+	dev->archdata.iommu = archdata;
+	return 0;
+
+error:
+	kfree(utlbs);
+	return ret;
+}
+
+static int ipmmu_add_device(struct device *dev)
+{
+	struct ipmmu_vmsa_archdata *archdata;
+	struct ipmmu_vmsa_device *mmu;
+	struct iommu_group *group;
+	int ret;
+
+	if (dev->archdata.iommu) {
+		dev_warn(dev, "IOMMU driver already assigned to device %s\n",
+			 dev_name(dev));
+		return -EINVAL;
+	}
+
 	/* Create a device group and add the device to it. */
 	group = iommu_group_alloc();
 	if (IS_ERR(group)) {
@@ -716,17 +740,12 @@ static int ipmmu_add_device(struct devic
 		goto error;
 	}
 
-	archdata = kzalloc(sizeof(*archdata), GFP_KERNEL);
-	if (!archdata) {
-		ret = -ENOMEM;
+	ret = ipmmu_init_platform_device(dev, group);
+	if (ret < 0) {
+		dev_err(dev, "Failed to init platform device\n");
 		goto error;
 	}
 
-	archdata->mmu = mmu;
-	archdata->utlbs = utlbs;
-	archdata->num_utlbs = num_utlbs;
-	dev->archdata.iommu = archdata;
-
 	/*
 	 * Create the ARM mapping, used by the ARM DMA mapping core to allocate
 	 * VAs. This will allocate a corresponding IOMMU domain.
@@ -736,6 +755,8 @@ static int ipmmu_add_device(struct devic
 	 * - Make the mapping size configurable ? We currently use a 2GB mapping
 	 *   at a 1GB offset to ensure that NULL VAs will fault.
 	 */
+	archdata = dev->archdata.iommu;
+	mmu = archdata->mmu;
 	if (!mmu->mapping) {
 		struct dma_iommu_mapping *mapping;
 
@@ -762,9 +783,6 @@ static int ipmmu_add_device(struct devic
 error:
 	arm_iommu_release_mapping(mmu->mapping);
 
-	kfree(dev->archdata.iommu);
-	kfree(utlbs);
-
 	dev->archdata.iommu = NULL;
 
 	if (!IS_ERR_OR_NULL(group))

[PATCH v3 04/06] iommu/ipmmu-vmsa: Break out domain allocation code

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

Break out the domain allocation code into a separate function.
This is preparation for future code sharing.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Changes since V2:
 - Included this new patch as-is from the following series:
   [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update

 drivers/iommu/ipmmu-vmsa.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- 0005/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2016-06-02 20:58:41.820607110 +0900
@@ -506,13 +506,10 @@ static irqreturn_t ipmmu_irq(int irq, vo
  * IOMMU Operations
  */
 
-static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
+static struct iommu_domain *__ipmmu_domain_alloc(unsigned type)
 {
 	struct ipmmu_vmsa_domain *domain;
 
-	if (type != IOMMU_DOMAIN_UNMANAGED)
-		return NULL;
-
 	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
 	if (!domain)
 		return NULL;
@@ -522,6 +519,14 @@ static struct iommu_domain *ipmmu_domain
 	return &domain->io_domain;
 }
 
+static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
+{
+	if (type != IOMMU_DOMAIN_UNMANAGED)
+		return NULL;
+
+	return __ipmmu_domain_alloc(type);
+}
+
 static void ipmmu_domain_free(struct iommu_domain *io_domain)
 {
 	struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);

[PATCH v3 05/06] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

Introduce an alternative set of iommu_ops suitable for 64-bit ARM
as well as 32-bit ARM when CONFIG_IOMMU_DMA=y.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Changes since V2:
 - Included this new patch from the following series:
   [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
 - Use only a single iommu_ops structure with #ifdef CONFIG_IOMMU_DMA
 - Folded in #ifdefs to handle CONFIG_ARM and CONFIG_IOMMU_DMA
 - of_xlate() is now used without #ifdefs
 - Made sure code compiles on both 32-bit and 64-bit ARM.
 
 drivers/iommu/ipmmu-vmsa.c |  111 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 103 insertions(+), 8 deletions(-)

--- 0008/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2016-06-02 22:15:52.090607110 +0900
@@ -10,6 +10,7 @@
 
 #include <linux/bitmap.h>
 #include <linux/delay.h>
+#include <linux/dma-iommu.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/export.h>
@@ -22,8 +23,10 @@
 #include <linux/sizes.h>
 #include <linux/slab.h>
 
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
 #include <asm/dma-iommu.h>
 #include <asm/pgalloc.h>
+#endif
 
 #include "io-pgtable.h"
 
@@ -520,14 +523,6 @@ static struct iommu_domain *__ipmmu_doma
 	return &domain->io_domain;
 }
 
-static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
-{
-	if (type != IOMMU_DOMAIN_UNMANAGED)
-		return NULL;
-
-	return __ipmmu_domain_alloc(type);
-}
-
 static void ipmmu_domain_free(struct iommu_domain *io_domain)
 {
 	struct ipmmu_vmsa_domain *domain = to_vmsa_domain(io_domain);
@@ -715,6 +710,8 @@ error:
 	return ret;
 }
 
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
+
 static int ipmmu_add_device(struct device *dev)
 {
 	struct ipmmu_vmsa_archdata *archdata;
@@ -809,6 +806,14 @@ static void ipmmu_remove_device(struct d
 	dev->archdata.iommu = NULL;
 }
 
+static struct iommu_domain *ipmmu_domain_alloc(unsigned type)
+{
+	if (type != IOMMU_DOMAIN_UNMANAGED)
+		return NULL;
+
+	return __ipmmu_domain_alloc(type);
+}
+
 static const struct iommu_ops ipmmu_ops = {
 	.domain_alloc = ipmmu_domain_alloc,
 	.domain_free = ipmmu_domain_free,
@@ -823,6 +828,94 @@ static const struct iommu_ops ipmmu_ops
 	.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
 };
 
+#endif /* !CONFIG_ARM && CONFIG_IOMMU_DMA */
+
+#ifdef CONFIG_IOMMU_DMA
+
+static struct iommu_domain *ipmmu_domain_alloc_dma(unsigned type)
+{
+	struct iommu_domain *io_domain;
+
+	if (type != IOMMU_DOMAIN_DMA)
+		return NULL;
+
+	io_domain = __ipmmu_domain_alloc(type);
+	if (io_domain)
+		iommu_get_dma_cookie(io_domain);
+
+	return io_domain;
+}
+
+static void ipmmu_domain_free_dma(struct iommu_domain *io_domain)
+{
+	iommu_put_dma_cookie(io_domain);
+	ipmmu_domain_free(io_domain);
+}
+
+static int ipmmu_add_device_dma(struct device *dev)
+{
+	struct iommu_group *group;
+
+	/* only accept devices with iommus property */
+	if (of_count_phandle_with_args(dev->of_node, "iommus",
+				       "#iommu-cells") < 0)
+		return -ENODEV;
+
+	group = iommu_group_get_for_dev(dev);
+	if (IS_ERR(group))
+		return PTR_ERR(group);
+
+	return 0;
+}
+
+static void ipmmu_remove_device_dma(struct device *dev)
+{
+	iommu_group_remove_device(dev);
+}
+
+static struct iommu_group *ipmmu_device_group_dma(struct device *dev)
+{
+	struct iommu_group *group;
+	int ret;
+
+	group = generic_device_group(dev);
+	if (IS_ERR(group))
+		return group;
+
+	ret = ipmmu_init_platform_device(dev, group);
+	if (ret) {
+		iommu_group_put(group);
+		group = ERR_PTR(ret);
+	}
+
+	return group;
+}
+
+static int ipmmu_of_xlate_dma(struct device *dev,
+			      struct of_phandle_args *spec)
+{
+	/* dummy callback to satisfy of_iommu_configure() */
+	return 0;
+}
+
+static const struct iommu_ops ipmmu_ops = {
+	.domain_alloc = ipmmu_domain_alloc_dma,
+	.domain_free = ipmmu_domain_free_dma,
+	.attach_dev = ipmmu_attach_device,
+	.detach_dev = ipmmu_detach_device,
+	.map = ipmmu_map,
+	.unmap = ipmmu_unmap,
+	.map_sg = default_iommu_map_sg,
+	.iova_to_phys = ipmmu_iova_to_phys,
+	.add_device = ipmmu_add_device_dma,
+	.remove_device = ipmmu_remove_device_dma,
+	.device_group = ipmmu_device_group_dma,
+	.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
+	.of_xlate = ipmmu_of_xlate_dma,
+};
+
+#endif /* CONFIG_IOMMU_DMA */
+
 /* -----------------------------------------------------------------------------
  * Probe/remove and init
  */
@@ -912,7 +1005,9 @@ static int ipmmu_remove(struct platform_
 	list_del(&mmu->list);
 	spin_unlock(&ipmmu_devices_lock);
 
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
 	arm_iommu_release_mapping(mmu->mapping);
+#endif
 
 	ipmmu_device_reset(mmu);
 

[PATCH v3 06/06] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency

[Magnus Damm]

From: Magnus Damm <damm+renesas@opensource.se>

Neither the ARM page table code enabled by IOMMU_IO_PGTABLE_LPAE
nor the IPMMU_VMSA driver actually depends on ARM_LPAE, so get
rid of the dependency.

Tested with ipmmu-vmsa on r8a7794 ALT and a kernel config using:
 # CONFIG_ARM_LPAE is not set

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---

 Changes since V2:
 - None

 Changes since V1:
 - Rebased on top of ARCH_RENESAS change
 - Added Acked-by from Laurent

 drivers/iommu/Kconfig |    1 -
 1 file changed, 1 deletion(-)

--- 0001/drivers/iommu/Kconfig
+++ work/drivers/iommu/Kconfig	2016-06-02 22:17:14.950607110 +0900
@@ -273,7 +273,6 @@ config EXYNOS_IOMMU_DEBUG
 
 config IPMMU_VMSA
 	bool "Renesas VMSA-compatible IPMMU"
-	depends on ARM_LPAE
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE

Re: [PATCH v3 00/06] iommu/ipmmu-vmsa: IPMMU multi-arch update V3

[Geert Uytterhoeven]

Hi Magnus,

On Thu, Jun 2, 2016 at 5:55 PM, Magnus Damm <magnus.damm@gmail.com> wrote:
> iommu/ipmmu-vmsa: IPMMU multi-arch update V3
>
> [PATCH v3 01/06] iommu/ipmmu-vmsa: Remove platform data handling
> [PATCH v3 02/06] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context
> [PATCH v3 03/06] iommu/ipmmu-vmsa: Break out utlb parsing code
> [PATCH v3 04/06] iommu/ipmmu-vmsa: Break out domain allocation code
> [PATCH v3 05/06] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
> [PATCH v3 06/06] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency
>
> These patches update the IPMMU driver with a couple of changes
> to support build on multiple architectures. In the process of
> doing so the interrupt code gets reworked and the foundation
> for supporting multiple contexts are added.
>
> In this version of the series the patch order has been reworked
> to make simplify review. Thanks to Laurent for his suggestions!
>
> The 32-bit ARM logic has intentionally been changed as little as possible
> to avoid breakage. Once CONFIG_IOMMU_DMA can be used it may be good time
> to revisit the init ordering for the 32-bit SoCs. There is room for
> improvement for sure like Robin Murphy kindly pointed out.
>
> Changes since V2:
>  - Got rid of patch 3 from the V2 however patch 1, 2 and 4 are kept.
>  - V3 patch 3, 4 and 5 come from
>    [PATCH 00/04] iommu/ipmmu-vmsa: IPMMU CONFIG_IOMMU_DMA update
>  - Patch 5 has been reworked to include patch 3 of the V1 of this series
>
> Changes since V1:
>  - Got rid of patch 2 and 3 from initial series
>  - Updated bitmap code locking and also used lighter bitop functions
>  - Updated the Kconfig bits to apply on top of ARCH_RENESAS
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>

Thanks for your series!

For your convenience, I've queued it up in topic/ipmmu-multi-arch-v3 at
https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git, and
will include it in next renesas-drivers release.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3 00/06] iommu/ipmmu-vmsa: IPMMU multi-arch update V3

[Geert Uytterhoeven]

Hi Magnus,

On Thu, Jun 2, 2016 at 5:55 PM, Magnus Damm <magnus.damm@gmail.com> wrote:
> iommu/ipmmu-vmsa: IPMMU multi-arch update V3
>
> [PATCH v3 01/06] iommu/ipmmu-vmsa: Remove platform data handling
> [PATCH v3 02/06] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context
> [PATCH v3 03/06] iommu/ipmmu-vmsa: Break out utlb parsing code
> [PATCH v3 04/06] iommu/ipmmu-vmsa: Break out domain allocation code
> [PATCH v3 05/06] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
> [PATCH v3 06/06] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency
>
> These patches update the IPMMU driver with a couple of changes
> to support build on multiple architectures. In the process of
> doing so the interrupt code gets reworked and the foundation
> for supporting multiple contexts are added.
>
> In this version of the series the patch order has been reworked
> to make simplify review. Thanks to Laurent for his suggestions!
>
> The 32-bit ARM logic has intentionally been changed as little as possible
> to avoid breakage. Once CONFIG_IOMMU_DMA can be used it may be good time
> to revisit the init ordering for the 32-bit SoCs. There is room for
> improvement for sure like Robin Murphy kindly pointed out.

When IPMMU_VMSA is enabled on 32-bit ARM, the system crashes during boot.
I saw this first on r8a73a4/ape6evm, where my local config had it enabled.
After enabling IOMMU support and IPMMU_VMSA in my config for r8a7791/koelsch,
koelsch crashes during boot, too, although the failure mode is different.

Unfortunately I've lost all collected crash logs in a power failure due to the
bad weather. So you may beat me to reproduce this.

I did verify in time that the crashes do not happen with a similar config on
renesas-drivers-2016-05-31-v4.7-rc1, which contained the previous version of
your patch set.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds