* [PATCH 6/7] Input: synaptics-rmi4: Remove unneeded variable
@ 2016-06-03 18:41 Andrew Duggan
2016-06-15 9:33 ` Benjamin Tissoires
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Duggan @ 2016-06-03 18:41 UTC (permalink / raw)
To: linux-input, linux-kernel
Cc: Andrew Duggan, Dmitry Torokhov, Linus Walleij, Jiri Kosina,
Benjamin Tissoires, Vincent Huang, Nick Dyer
Remove the data_base_addr_offset variable in rmi_f11_attention(). The
f11 data is read as a single block so there is no need to store an offset
to the data address.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
---
drivers/input/rmi4/rmi_f11.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index e691432..688e604 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -1265,7 +1265,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f11_data *f11 = dev_get_drvdata(&fn->dev);
u16 data_base_addr = fn->fd.data_base_addr;
- u16 data_base_addr_offset = 0;
int error;
if (rmi_dev->xport->attn_data) {
@@ -1275,8 +1274,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
rmi_dev->xport->attn_size -= f11->sensor.attn_size;
} else {
error = rmi_read_block(rmi_dev,
- data_base_addr + data_base_addr_offset,
- f11->sensor.data_pkt,
+ data_base_addr, f11->sensor.data_pkt,
f11->sensor.pkt_size);
if (error < 0)
return error;
@@ -1284,7 +1282,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
drvdata->num_of_irq_regs);
- data_base_addr_offset += f11->sensor.pkt_size;
return 0;
}
--
2.5.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 6/7] Input: synaptics-rmi4: Remove unneeded variable
2016-06-03 18:41 [PATCH 6/7] Input: synaptics-rmi4: Remove unneeded variable Andrew Duggan
@ 2016-06-15 9:33 ` Benjamin Tissoires
0 siblings, 0 replies; 2+ messages in thread
From: Benjamin Tissoires @ 2016-06-15 9:33 UTC (permalink / raw)
To: Andrew Duggan
Cc: linux-input, linux-kernel, Dmitry Torokhov, Linus Walleij,
Jiri Kosina, Vincent Huang, Nick Dyer
On Jun 03 2016 or thereabouts, Andrew Duggan wrote:
> Remove the data_base_addr_offset variable in rmi_f11_attention(). The
> f11 data is read as a single block so there is no need to store an offset
> to the data address.
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
> ---
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cheers,
Benjamin
> drivers/input/rmi4/rmi_f11.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
> index e691432..688e604 100644
> --- a/drivers/input/rmi4/rmi_f11.c
> +++ b/drivers/input/rmi4/rmi_f11.c
> @@ -1265,7 +1265,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
> struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
> struct f11_data *f11 = dev_get_drvdata(&fn->dev);
> u16 data_base_addr = fn->fd.data_base_addr;
> - u16 data_base_addr_offset = 0;
> int error;
>
> if (rmi_dev->xport->attn_data) {
> @@ -1275,8 +1274,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
> rmi_dev->xport->attn_size -= f11->sensor.attn_size;
> } else {
> error = rmi_read_block(rmi_dev,
> - data_base_addr + data_base_addr_offset,
> - f11->sensor.data_pkt,
> + data_base_addr, f11->sensor.data_pkt,
> f11->sensor.pkt_size);
> if (error < 0)
> return error;
> @@ -1284,7 +1282,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
>
> rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
> drvdata->num_of_irq_regs);
> - data_base_addr_offset += f11->sensor.pkt_size;
>
> return 0;
> }
> --
> 2.5.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-15 9:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-03 18:41 [PATCH 6/7] Input: synaptics-rmi4: Remove unneeded variable Andrew Duggan
2016-06-15 9:33 ` Benjamin Tissoires
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).