linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: megous@megous.com
To: dev@linux-sunxi.org
Cc: linux-arm-kernel@lists.infradead.org,
	"Josef Gajdusek" <atx@atx.name>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@codeaurora.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Maxime Ripard" <maxime.ripard@free-electrons.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Emilio López" <emilio@elopez.com.ar>,
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK),
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 02/14] ARM: clk: sunxi: Add driver for the H3 THS clock
Date: Thu, 23 Jun 2016 21:20:52 +0200	[thread overview]
Message-ID: <20160623192104.18720-3-megous@megous.com> (raw)
In-Reply-To: <20160623192104.18720-1-megous@megous.com>

From: Josef Gajdusek <atx@atx.name>

This patch adds a driver for the THS clock which is present on the
Allwinner H3.

Signed-off-by: Josef Gajdusek <atx@atx.name>
---
 Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
 drivers/clk/sunxi/Makefile                        |  1 +
 drivers/clk/sunxi/clk-h3-ths.c                    | 98 +++++++++++++++++++++++
 3 files changed, 100 insertions(+)
 create mode 100644 drivers/clk/sunxi/clk-h3-ths.c

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 8f7619d..5faae05 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -87,6 +87,7 @@ Required properties:
 	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
 	"allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
 	"allwinner,sun6i-a31-display-clk" - for the display clocks
+	"allwinner,sun8i-h3-ths-clk" - for THS on H3
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 39d2044..8e245e3 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -9,6 +9,7 @@ obj-y += clk-a10-mod1.o
 obj-y += clk-a10-pll2.o
 obj-y += clk-a10-ve.o
 obj-y += clk-a20-gmac.o
+obj-y += clk-h3-ths.o
 obj-y += clk-mod0.o
 obj-y += clk-simple-gates.o
 obj-y += clk-sun4i-display.o
diff --git a/drivers/clk/sunxi/clk-h3-ths.c b/drivers/clk/sunxi/clk-h3-ths.c
new file mode 100644
index 0000000..c1d6d32
--- /dev/null
+++ b/drivers/clk/sunxi/clk-h3-ths.c
@@ -0,0 +1,98 @@
+/*
+ * sun8i THS clock driver
+ *
+ * Copyright (C) 2015 Josef Gajdusek
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define SUN8I_H3_THS_CLK_ENABLE				31
+#define SUN8I_H3_THS_CLK_DIVIDER_SHIFT		0
+#define SUN8I_H3_THS_CLK_DIVIDER_WIDTH		2
+
+static DEFINE_SPINLOCK(sun8i_h3_ths_clk_lock);
+
+static const struct clk_div_table sun8i_h3_ths_clk_table[] __initconst = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+	{ } /* sentinel */
+};
+
+static void __init sun8i_h3_ths_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_gate *gate;
+	struct clk_divider *div;
+	const char *parent;
+	const char *clk_name = node->name;
+	void __iomem *reg;
+	int err;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+
+	if (IS_ERR(reg))
+		return;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		goto err_unmap;
+
+	div = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!div)
+		goto err_gate_free;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	parent = of_clk_get_parent_name(node, 0);
+
+	gate->reg = reg;
+	gate->bit_idx = SUN8I_H3_THS_CLK_ENABLE;
+	gate->lock = &sun8i_h3_ths_clk_lock;
+
+	div->reg = reg;
+	div->shift = SUN8I_H3_THS_CLK_DIVIDER_SHIFT;
+	div->width = SUN8I_H3_THS_CLK_DIVIDER_WIDTH;
+	div->table = sun8i_h3_ths_clk_table;
+	div->lock = &sun8i_h3_ths_clk_lock;
+
+	clk = clk_register_composite(NULL, clk_name, &parent, 1,
+								 NULL, NULL,
+								 &div->hw, &clk_divider_ops,
+								 &gate->hw, &clk_gate_ops,
+								 CLK_SET_RATE_PARENT);
+
+	if (IS_ERR(clk))
+		goto err_div_free;
+
+	err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	if (err)
+		goto err_unregister_clk;
+
+	return;
+
+err_unregister_clk:
+	clk_unregister(clk);
+err_gate_free:
+	kfree(gate);
+err_div_free:
+	kfree(div);
+err_unmap:
+	iounmap(reg);
+}
+
+CLK_OF_DECLARE(sun8i_h3_ths_clk, "allwinner,sun8i-h3-ths-clk",
+			   sun8i_h3_ths_clk_setup);
-- 
2.9.0

  parent reply	other threads:[~2016-06-23 19:27 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20160623192104.18720-1-megous@megous.com>
2016-06-23 19:20 ` [PATCH 01/14] ARM: dts: sun8i: Add SID node megous
2016-06-24  2:41   ` Chen-Yu Tsai
2016-06-24 19:58     ` Ondřej Jirman
2016-06-25  1:09       ` [linux-sunxi] " Chen-Yu Tsai
2016-06-23 19:20 ` megous [this message]
2016-06-23 19:20 ` [PATCH 03/14] thermal: Add support for sun8i THS on Allwinner H3 megous
2016-06-24  3:09   ` Chen-Yu Tsai
2016-06-24 21:50     ` Ondřej Jirman
2016-06-25  0:35     ` Ondřej Jirman
2016-06-25  0:54       ` Chen-Yu Tsai
2016-06-25  0:56         ` Ondřej Jirman
2016-06-23 19:20 ` [PATCH 04/14] dt-bindings: document sun8i_ths megous
2016-06-24  2:46   ` Chen-Yu Tsai
2016-06-23 19:20 ` [PATCH 05/14] ARM: dts: sun8i: Add THS node to the sun8i-h3.dtsi megous
2016-06-23 19:20 ` [PATCH 06/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi megous
2016-06-24  3:48   ` Chen-Yu Tsai
2016-06-24 22:51     ` Ondřej Jirman
2016-06-25  1:02       ` Chen-Yu Tsai
2016-06-25  7:02         ` Maxime Ripard
2016-06-25 14:50           ` Ondřej Jirman
2016-06-29 20:45             ` Maxime Ripard
2016-06-29 21:11               ` Ondřej Jirman
2016-06-30 11:04                 ` [linux-sunxi] " Michal Suchanek
2016-06-30 20:41                   ` Maxime Ripard
2016-07-17 14:39           ` Ondřej Jirman
2016-07-25  8:26             ` Maxime Ripard
     [not found]             ` <e57eb018-ef31-408e-84b2-b329510352d0@googlegroups.com>
2016-07-25  8:51               ` Maxime Ripard
2016-06-23 19:20 ` [PATCH 07/14] regulator: SY8106A regulator driver megous
2016-06-24  3:41   ` Chen-Yu Tsai
2016-06-25  0:11     ` Ondřej Jirman
2016-06-25  1:00       ` Chen-Yu Tsai
2016-06-23 19:20 ` [PATCH 08/14] ARM: dts: sun8i: Add r_twi I2C controller megous
2016-06-23 19:20 ` [PATCH 09/14] ARM: dts: sun8i: Enable r_twi on Orange Pi PC megous
2016-06-23 19:21 ` [PATCH 10/14] ARM: dts: sun8i: Add sy8106a regulator to " megous
2016-06-24  9:14   ` Chen-Yu Tsai
2016-06-23 19:21 ` [PATCH 11/14] ARM: sun8i: clk: Add clk-factor rate application method megous
2016-06-24  2:53   ` [linux-sunxi] " Julian Calaby
2016-06-23 19:21 ` [PATCH 12/14] ARM: dts: sun8i: Setup CPU operating points for Onrage PI PC megous
2016-06-23 19:21 ` [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One megous
2016-06-24  2:51   ` [linux-sunxi] " Julian Calaby
2016-06-24 22:39     ` Ondřej Jirman
2016-06-24  2:55   ` Julian Calaby
2016-06-23 19:21 ` [PATCH 14/14] ARM: dts: sun8i: Enable DVFS " megous

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160623192104.18720-3-megous@megous.com \
    --to=megous@megous.com \
    --cc=atx@atx.name \
    --cc=dev@linux-sunxi.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).