* [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts
@ 2016-06-26 8:47 Stefan Agner
2016-06-26 8:47 ` [PATCH v2 1/5] ARM: imx: add support for i.MX 7Solo Stefan Agner
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
The two SoC's i.MX 7Solo and i.MX 7Dual are very similar, but there
are some differences worth dividing the current i.MX 7Dual base device
tree. This patchset adds new base device tree imx7s.dtsi which is meant
to be used for i.MX 7Solo boards. Note that the SoC _family_ is called
imx7d/IMX7D throughout the kernel.
The third patch uses the new PMIC device tree binding (merge pending,
bindings have been acked by Rob Herring):
https://lkml.org/lkml/2016/6/25/212
Changes since v1:
- Add additional commit before recreating imx7d.dtsi to keep diffstat nice
- Define SD-card detect to be GPIO_ACTIVE_LOW
- Use compatible toradex,colibri-imx7(s|d)-eval-v3 (with dashes and v3)
- Various device tree properties fixed/altered as suggested by Shawn
- Specify 1P0D regulator supply
Stefan Agner (5):
ARM: imx: add support for i.MX 7Solo
ARM: dts: imx7d: use imx7s.dtsi as base device tree
ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
ARM: dts: imx7d: move input header into base device tree
ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 148 +++++
arch/arm/boot/dts/imx7-colibri.dtsi | 571 +++++++++++++++++
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 1 -
arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 66 ++
arch/arm/boot/dts/imx7d-colibri.dtsi | 54 ++
arch/arm/boot/dts/imx7d-nitrogen7.dts | 1 -
arch/arm/boot/dts/imx7d-sdb.dts | 1 -
arch/arm/boot/dts/imx7d.dtsi | 923 ++--------------------------
arch/arm/boot/dts/imx7s-colibri-eval-v3.dts | 51 ++
arch/arm/boot/dts/imx7s-colibri.dtsi | 50 ++
arch/arm/boot/dts/imx7s.dtsi | 881 ++++++++++++++++++++++++++
arch/arm/mach-imx/mach-imx7d.c | 1 +
13 files changed, 1873 insertions(+), 879 deletions(-)
create mode 100644 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
create mode 100644 arch/arm/boot/dts/imx7-colibri.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/imx7d-colibri.dtsi
create mode 100644 arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/imx7s-colibri.dtsi
create mode 100644 arch/arm/boot/dts/imx7s.dtsi
--
2.8.3
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/5] ARM: imx: add support for i.MX 7Solo
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
@ 2016-06-26 8:47 ` Stefan Agner
2016-06-26 8:47 ` [PATCH v2 2/5] ARM: dts: imx7d: use imx7s.dtsi as base device tree Stefan Agner
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
Add device tree compatible string "imx7s" for i.MX 7Solo.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/mach-imx/mach-imx7d.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index b450f52..36254a6 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -107,6 +107,7 @@ static void __init imx7d_init_irq(void)
static const char *const imx7d_dt_compat[] __initconst = {
"fsl,imx7d",
+ "fsl,imx7s",
NULL,
};
--
2.8.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/5] ARM: dts: imx7d: use imx7s.dtsi as base device tree
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
2016-06-26 8:47 ` [PATCH v2 1/5] ARM: imx: add support for i.MX 7Solo Stefan Agner
@ 2016-06-26 8:47 ` Stefan Agner
2016-06-26 8:47 ` [PATCH v2 3/5] ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics Stefan Agner
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
7Dual. The former has a subset of features of the latter, hence
use imx7s.dtsi as the new base device tree. To keep diffstat nice,
just move imx7d.dtsi to imx7s.dtsi temporarily and recreate
imx7d.dtsi in a second commit.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/{imx7d.dtsi => imx7s.dtsi} | 0
4 files changed, 3 insertions(+), 3 deletions(-)
rename arch/arm/boot/dts/{imx7d.dtsi => imx7s.dtsi} (100%)
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 4863451..3942c7d 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -13,7 +13,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7d.dtsi"
+#include "imx7s.dtsi"
/ {
model = "CompuLab CL-SOM-iMX7";
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index bef394e..8e993cb 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -43,7 +43,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7d.dtsi"
+#include "imx7s.dtsi"
/ {
model = "Boundary Devices i.MX7 Nitrogen7 Board";
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index d6da506..1286569 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -43,7 +43,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7d.dtsi"
+#include "imx7s.dtsi"
/ {
model = "Freescale i.MX7 SabreSD Board";
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7s.dtsi
similarity index 100%
rename from arch/arm/boot/dts/imx7d.dtsi
rename to arch/arm/boot/dts/imx7s.dtsi
--
2.8.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 3/5] ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
2016-06-26 8:47 ` [PATCH v2 1/5] ARM: imx: add support for i.MX 7Solo Stefan Agner
2016-06-26 8:47 ` [PATCH v2 2/5] ARM: dts: imx7d: use imx7s.dtsi as base device tree Stefan Agner
@ 2016-06-26 8:47 ` Stefan Agner
2016-06-26 8:47 ` [PATCH v2 4/5] ARM: dts: imx7d: move input header into base device tree Stefan Agner
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
The i.MX 7Solo implements a subset of features available on
i.MX 7Dual. Recreate imx7s.dtsi as the base device tree for
i.MX 7Dual boards. The i.MX 7Dual's additional features over
i.MX 7Solo are:
- Second Cortex-A7 core
- Second Gigabit Ethernet controller
- EPD (Electronc Paper Display, not yet part of the device tree)
- PCIe (not yet part of the device tree)
- Additional USB2.0 OTG controller
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/imx7d.dtsi | 128 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 79 +-------------------
5 files changed, 133 insertions(+), 80 deletions(-)
create mode 100644 arch/arm/boot/dts/imx7d.dtsi
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 3942c7d..4863451 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -13,7 +13,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7s.dtsi"
+#include "imx7d.dtsi"
/ {
model = "CompuLab CL-SOM-iMX7";
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 8e993cb..bef394e 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -43,7 +43,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7s.dtsi"
+#include "imx7d.dtsi"
/ {
model = "Boundary Devices i.MX7 Nitrogen7 Board";
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 1286569..d6da506 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -43,7 +43,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include "imx7s.dtsi"
+#include "imx7d.dtsi"
/ {
model = "Freescale i.MX7 SabreSD Board";
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
new file mode 100644
index 0000000..51c13cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ etm@3007d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007d000 0x1000>;
+
+ /*
+ * System will hang if added nosmp in kernel command line
+ * without arm,primecell-periphid because amba bus try to
+ * read id and core1 power off at this time.
+ */
+ arm,primecell-periphid = <0xbb956>;
+ cpu = <&cpu1>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
+ };
+ };
+};
+
+&aips3 {
+ usbotg2: usb@30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc2: usbmisc@30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
+
+ fec2: ethernet@30bf0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+};
+
+&ca_funnel_ports {
+ port@1 {
+ reg = <1>;
+ ca_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index d70d55d..672dde2 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1,5 +1,6 @@
/*
* Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -87,12 +88,6 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
};
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
};
intc: interrupt-controller@31001000 {
@@ -263,7 +258,7 @@
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ ca_funnel_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -276,14 +271,6 @@
};
};
- port@1 {
- reg = <1>;
- ca_funnel_in_port1: endpoint {
- slave-mode;
- remote-endpoint = <&etm1_out_port>;
- };
- };
-
/* funnel output port */
port@2 {
reg = <0>;
@@ -310,27 +297,6 @@
};
};
- etm@3007d000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0x3007d000 0x1000>;
-
- /*
- * System will hang if added nosmp in kernel command line
- * without arm,primecell-periphid because amba bus try to
- * read id and core1 power off at this time.
- */
- arm,primecell-periphid = <0xbb956>;
- cpu = <&cpu1>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
- };
- };
- };
-
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -819,17 +785,6 @@
status = "disabled";
};
- usbotg2: usb@30b20000 {
- compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x30b20000 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_USB_CTRL_CLK>;
- fsl,usbphy = <&usbphynop2>;
- fsl,usbmisc = <&usbmisc2 0>;
- phy-clkgate-delay-us = <400>;
- status = "disabled";
- };
-
usbh: usb@30b30000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b30000 0x200>;
@@ -849,12 +804,6 @@
reg = <0x30b10200 0x200>;
};
- usbmisc2: usbmisc@30b20200 {
- #index-cells = <1>;
- compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x30b20200 0x200>;
- };
-
usbmisc3: usbmisc@30b30200 {
#index-cells = <1>;
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
@@ -867,12 +816,6 @@
clock-names = "main_clk";
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY2_CLK>;
- clock-names = "main_clk";
- };
-
usbphynop3: usbphynop3 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
@@ -932,24 +875,6 @@
fsl,num-rx-queues=<3>;
status = "disabled";
};
-
- fec2: ethernet@30bf0000 {
- compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
- reg = <0x30bf0000 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
- <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
- status = "disabled";
- };
};
};
};
--
2.8.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 4/5] ARM: dts: imx7d: move input header into base device tree
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
` (2 preceding siblings ...)
2016-06-26 8:47 ` [PATCH v2 3/5] ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics Stefan Agner
@ 2016-06-26 8:47 ` Stefan Agner
2016-06-26 8:47 ` [PATCH v2 5/5] ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Stefan Agner
2016-06-28 2:46 ` [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
The base device tree uses KEY_POWER in the snvs-powerkey node,
hence include the input.h header file in the base device tree.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
---
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 1 -
arch/arm/boot/dts/imx7d-nitrogen7.dts | 1 -
arch/arm/boot/dts/imx7d-sdb.dts | 1 -
arch/arm/boot/dts/imx7s.dtsi | 1 +
4 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 4863451..58b09bf 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -12,7 +12,6 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index bef394e..ce08f18 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -42,7 +42,6 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index d6da506..a0ae036 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -42,7 +42,6 @@
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 672dde2..7486c52 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/clock/imx7d-clock.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx7d-pinfunc.h"
#include "skeleton.dtsi"
--
2.8.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 5/5] ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
` (3 preceding siblings ...)
2016-06-26 8:47 ` [PATCH v2 4/5] ARM: dts: imx7d: move input header into base device tree Stefan Agner
@ 2016-06-26 8:47 ` Stefan Agner
2016-06-28 2:46 ` [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Stefan Agner @ 2016-06-26 8:47 UTC (permalink / raw)
To: shawnguo, kernel
Cc: max.krummenacher, marcel.ziswiler, fabio.estevam, galak,
ijc+devicetree, mark.rutland, pawel.moll, robh+dt, grinberg,
devicetree, linux-arm-kernel, linux-kernel, Stefan Agner
Add support for the Computer on Module Colibri iMX7S/iMX7D along
with the development/evaluation carrier board device trees. Follow
the usual hierarchic include model, maintaining shared configuration
in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively.
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 148 +++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 571 ++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 66 ++++
arch/arm/boot/dts/imx7d-colibri.dtsi | 54 +++
arch/arm/boot/dts/imx7s-colibri-eval-v3.dts | 51 +++
arch/arm/boot/dts/imx7s-colibri.dtsi | 50 +++
7 files changed, 943 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
create mode 100644 arch/arm/boot/dts/imx7-colibri.dtsi
create mode 100644 arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/imx7d-colibri.dtsi
create mode 100644 arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
create mode 100644 arch/arm/boot/dts/imx7s-colibri.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 146850b..1e13fcc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -401,9 +401,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-colibri-eval-v3.dtb \
imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
- imx7d-sdb.dtb
+ imx7d-sdb.dtb \
+ imx7s-colibri-eval-v3.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
ls1021a-twr.dtb
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 0000000..1545661
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&bl {
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&adc2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: m41t0m6@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&lcdif {
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing_vga>;
+
+ /* Standard VGA timing */
+ timing_vga: 640x480 {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ de-active = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+ no-1-8-v;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
new file mode 100644
index 0000000..0a9d3a8
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -0,0 +1,571 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+};
+
+&cpu0 {
+ arm-supply = <®_DCDC2>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rmii";
+ phy-supply = <®_LDO1>;
+ fsl,magic-packet;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+ status = "okay";
+
+ ad7879@2c {
+ compatible = "adi,ad7879-1";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+
+ pmic@33 {
+ compatible = "ricoh,rn5t567";
+ reg = <0x33>;
+
+ regulators {
+ reg_DCDC1: DCDC1 { /* V1.0_SOC */
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC2: DCDC2 { /* V1.1_ARM */
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC3: DCDC3 { /* V1.8 */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+ regulator-min-microvolt = <1325000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_LDO2: LDO2 { /* +V1.8_SD */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <3325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+ regulator-min-microvolt = <3275000>;
+ regulator-max-microvolt = <3325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO4: LDO4 { /* V1.8_LPSR */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+®_1p0d {
+ vin-supply = <®_DCDC3>;
+};
+
+&snvs_pwrkey {
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ fsl,dte-mode;
+};
+
+&usbotg1 {
+ dr_mode = "host";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+ pinctrl_gpio1: gpio1-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */
+ MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */
+ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
+ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */
+ MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */
+ MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */
+ >;
+ };
+
+ pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
+ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
+ MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
+ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */
+ MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */
+ MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */
+ MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */
+ MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */
+ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */
+ MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */
+ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */
+ MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */
+ >;
+ };
+
+ pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73
+
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3-cs-grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3-grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand-grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CLK__NAND_CLE 0x71
+ MX7D_PAD_SD3_CMD__NAND_ALE 0x71
+ MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71
+ MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71
+ MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74
+ MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
+ MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
+ MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71
+ MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71
+ MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71
+ MX7D_PAD_SD3_DATA3__NAND_DATA03 0x71
+ MX7D_PAD_SD3_DATA4__NAND_DATA04 0x71
+ MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71
+ MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71
+ MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71
+ >;
+ };
+
+ pinctrl_i2c4: i2c4-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f
+ MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdif-dat-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm1: pwm1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm3: pwm3-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm4: pwm4-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79
+ MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79
+ MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79
+ >;
+ };
+
+ pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */
+ MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */
+ >;
+ };
+
+ pinctrl_uart2: uart2-grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
+ MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
+ MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+ >;
+ };
+ pinctrl_uart3: uart3-grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+ >;
+ };
+
+ pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1-grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1-grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+ pinctrl_gpio_lpsr: gpio1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59
+ MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f
+ MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_cd_usdhc1: usdhc1-cd-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
+ >;
+ };
+
+ pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
+ MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
new file mode 100644
index 0000000..bd01d2c
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+ "fsl,imx7d";
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
new file mode 100644
index 0000000..3c2cb50
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
new file mode 100644
index 0000000..bd2a49c
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+ "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
new file mode 100644
index 0000000..b810134
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+};
--
2.8.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
` (4 preceding siblings ...)
2016-06-26 8:47 ` [PATCH v2 5/5] ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Stefan Agner
@ 2016-06-28 2:46 ` Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2016-06-28 2:46 UTC (permalink / raw)
To: Stefan Agner
Cc: kernel, mark.rutland, devicetree, pawel.moll, ijc+devicetree,
marcel.ziswiler, linux-kernel, robh+dt, grinberg,
max.krummenacher, galak, fabio.estevam, linux-arm-kernel
On Sun, Jun 26, 2016 at 01:47:50AM -0700, Stefan Agner wrote:
> Stefan Agner (5):
> ARM: imx: add support for i.MX 7Solo
> ARM: dts: imx7d: use imx7s.dtsi as base device tree
> ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
> ARM: dts: imx7d: move input header into base device tree
> ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
Applied all, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-06-28 2:46 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-26 8:47 [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
2016-06-26 8:47 ` [PATCH v2 1/5] ARM: imx: add support for i.MX 7Solo Stefan Agner
2016-06-26 8:47 ` [PATCH v2 2/5] ARM: dts: imx7d: use imx7s.dtsi as base device tree Stefan Agner
2016-06-26 8:47 ` [PATCH v2 3/5] ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics Stefan Agner
2016-06-26 8:47 ` [PATCH v2 4/5] ARM: dts: imx7d: move input header into base device tree Stefan Agner
2016-06-26 8:47 ` [PATCH v2 5/5] ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Stefan Agner
2016-06-28 2:46 ` [PATCH v2 0/5] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).