[PATCH V8 1/2] regulator: Add document for MT6323 regulator

[PATCH V8 1/2] regulator: Add document for MT6323 regulator

[John Crispin]

Signed-off-by: John Crispin <john@phrozen.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
---
This is a resend as V7 was dropped due to a merge order conflict.

Changes in V7
* remove another compatible string
* small wording changes

Changes in V6
* remove the compatible string

Changes in V5
* regulator vs regulators

Changes in V4
* regulator is a subnode and not a property

 .../bindings/regulator/mt6323-regulator.txt        |  239 ++++++++++++++++++++
 1 file changed, 239 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 0000000..9fd95e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,239 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vproc, buck_vsys, buck_vpa
+LDO:
+  ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+  ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+  ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+  ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+
+		mt6323regulator: regulators {
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+	};
-- 
1.7.10.4

[PATCH V8 2/2] regulator: mt6323: Add support for MT6323 regulator

[John Crispin]

From: Chen Zhong <chen.zhong@mediatek.com>

The MT6323 is a regulator found on boards based on MediaTek MT7623 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
This is a resend as V7 was dropped due to a merge order conflict.

Changes in V6
* add back the set/get mode callbacks

Changes in V5
* remove the code that modifies constraints
* remove the code allows mode changes

Changes in V4:
* add id_table and of_match_table
* use short GPL text
* change MODULE_LICENSE to GPL V2

Changes in V3:
* none

Changes in V2:
* send to the the proper maintainer

 drivers/regulator/Kconfig                  |    9 +
 drivers/regulator/Makefile                 |    1 +
 drivers/regulator/mt6323-regulator.c       |  432 ++++++++++++++++++++++++++++
 include/linux/regulator/mt6323-regulator.h |   52 ++++
 4 files changed, 494 insertions(+)
 create mode 100644 drivers/regulator/mt6323-regulator.c
 create mode 100644 include/linux/regulator/mt6323-regulator.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ae9cbd6..6c88e31 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -498,6 +498,15 @@ config REGULATOR_MT6311
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6323
+	tristate "MediaTek MT6323 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6323 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6397
 	tristate "MediaTek MT6397 PMIC"
 	depends on MFD_MT6397
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 85a1d44..f3da9ee 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c
new file mode 100644
index 0000000..28ebbda
--- /dev/null
+++ b/drivers/regulator/mt6323-regulator.c
@@ -0,0 +1,432 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6323-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6323_LDO_MODE_NORMAL	0
+#define MT6323_LDO_MODE_LP	1
+
+/*
+ * MT6323 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6323_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+};
+
+#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+}
+
+#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt,		\
+		_modeset_reg, _modeset_mask)				\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const u32 ldo_volt_table1[] = {
+	3300000, 3400000, 3500000, 3600000,
+};
+
+static const u32 ldo_volt_table2[] = {
+	1500000, 1800000, 2500000, 2800000,
+};
+
+static const u32 ldo_volt_table3[] = {
+	1800000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+	3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+	1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
+};
+
+static const u32 ldo_volt_table7[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table8[] = {
+	1800000, 3000000,
+};
+
+static const u32 ldo_volt_table9[] = {
+	1200000, 1350000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static int mt6323_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6323_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6323_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static struct regulator_ops mt6323_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+};
+
+static struct regulator_ops mt6323_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+static struct regulator_ops mt6323_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6323_ID_XXX) */
+static struct mt6323_regulator_info mt6323_regulators[] = {
+	MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250,
+		buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f,
+		MT6323_VPROC_CON10, MT6323_VPROC_CON5),
+	MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500,
+		buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f,
+		MT6323_VSYS_CON10, MT6323_VSYS_CON5),
+	MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9,
+		0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5),
+	MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000,
+		MT6323_ANALDO_CON1, 0x2),
+	MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000,
+		MT6323_ANALDO_CON20, 0x2),
+	MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1,
+		MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1,
+		MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000,
+		MT6323_ANALDO_CON2, 0x2),
+	MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2,
+		MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0),
+	MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000,
+		MT6323_DIGLDO_CON0, 0x2),
+	MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000,
+		MT6323_DIGLDO_CON2, 0x2),
+	MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3,
+		MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10,
+		MT6323_DIGLDO_CON3, 0x2),
+	MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4,
+		MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80,
+		MT6323_DIGLDO_CON5, 0x2),
+	MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4,
+		MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80,
+		MT6323_DIGLDO_CON6, 0x2),
+	MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5,
+		MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0,
+		MT6323_DIGLDO_CON7, 0x2),
+	MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6,
+		MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0,
+		MT6323_DIGLDO_CON8, 0x2),
+	MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7,
+		MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60,
+		MT6323_DIGLDO_CON9, 0x2),
+	MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000,
+		MT6323_DIGLDO_CON11, 0x2),
+	MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8,
+		MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20,
+		MT6323_DIGLDO_CON13, 0x2),
+	MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8,
+		MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20,
+		MT6323_DIGLDO_CON14, 0x2),
+	MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000,
+		-1, 0),
+	MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5,
+		MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0,
+		MT6323_DIGLDO_CON31, 0x2),
+	MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5,
+		MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0,
+		MT6323_DIGLDO_CON39, 0x2),
+	MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000,
+		MT6323_DIGLDO_CON45, 0x2),
+	MT6323_LDO("ldo_vm", VM, ldo_volt_table9,
+		MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30,
+		MT6323_DIGLDO_CON47, 0x2),
+	MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000,
+		MT6323_DIGLDO_CON49, 0x2),
+	MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10,
+		MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60,
+		MT6323_DIGLDO_CON51, 0x2),
+	MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000,
+		MT6323_DIGLDO_CON53, 0x2),
+};
+
+static int mt6323_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		if (mt6323_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6323->regmap,
+				mt6323_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6323_regulators[i].vselctrl_mask) {
+				mt6323_regulators[i].desc.vsel_reg =
+				mt6323_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6323_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6323_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6323->regmap, MT6323_CID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6323_regulators[i];
+		config.regmap = mt6323->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6323_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6323_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6323_platform_ids[] = {
+	{"mt6323-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6323_platform_ids);
+
+static const struct of_device_id mt6323_of_match[] = {
+	{ .compatible = "mediatek,mt6323-regulator", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mt6323_of_match);
+
+static struct platform_driver mt6323_regulator_driver = {
+	.driver = {
+		.name = "mt6323-regulator",
+		.of_match_table = of_match_ptr(mt6323_of_match),
+	},
+	.probe = mt6323_regulator_probe,
+	.id_table = mt6323_platform_ids,
+};
+
+module_platform_driver(mt6323_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h
new file mode 100644
index 0000000..67011cd
--- /dev/null
+++ b/include/linux/regulator/mt6323-regulator.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6323_H
+#define __LINUX_REGULATOR_MT6323_H
+
+enum {
+	MT6323_ID_VPROC = 0,
+	MT6323_ID_VSYS,
+	MT6323_ID_VPA,
+	MT6323_ID_VTCXO,
+	MT6323_ID_VCN28,
+	MT6323_ID_VCN33_BT,
+	MT6323_ID_VCN33_WIFI,
+	MT6323_ID_VA,
+	MT6323_ID_VCAMA,
+	MT6323_ID_VIO28 = 9,
+	MT6323_ID_VUSB,
+	MT6323_ID_VMC,
+	MT6323_ID_VMCH,
+	MT6323_ID_VEMC3V3,
+	MT6323_ID_VGP1,
+	MT6323_ID_VGP2,
+	MT6323_ID_VGP3,
+	MT6323_ID_VCN18,
+	MT6323_ID_VSIM1,
+	MT6323_ID_VSIM2,
+	MT6323_ID_VRTC,
+	MT6323_ID_VCAMAF,
+	MT6323_ID_VIBR,
+	MT6323_ID_VRF18,
+	MT6323_ID_VM,
+	MT6323_ID_VIO18,
+	MT6323_ID_VCAMD,
+	MT6323_ID_VCAMIO,
+	MT6323_ID_RG_MAX,
+};
+
+#define MT6323_MAX_REGULATOR	MT6323_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6323_H */
-- 
1.7.10.4

Re: [PATCH V8 1/2] regulator: Add document for MT6323 regulator

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 208 bytes --]

On Mon, Jul 11, 2016 at 02:29:38PM +0200, John Crispin wrote:

> This is a resend as V7 was dropped due to a merge order conflict.

What were the dependencies and why will simply resending this resolve
them?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH V8 1/2] regulator: Add document for MT6323 regulator

[John Crispin]

On 11/07/2016 20:08, Mark Brown wrote:
> On Mon, Jul 11, 2016 at 02:29:38PM +0200, John Crispin wrote:
> 
>> This is a resend as V7 was dropped due to a merge order conflict.
> 
> What were the dependencies and why will simply resending this resolve
> them?
> 

Hi Mark,

the dependency was the mt6323 support inside the mt6397 MFD device [1]
and the headers that it included. this has been merged so the regulator
driver is good to go for 4.8

	John

[1]
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/mfd/mt6397-core.c?id=refs/tags/v4.7-rc7

> 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 

Re: [PATCH V8 1/2] regulator: Add document for MT6323 regulator

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 909 bytes --]

On Mon, Jul 11, 2016 at 08:55:24PM +0200, John Crispin wrote:
> On 11/07/2016 20:08, Mark Brown wrote:
> > On Mon, Jul 11, 2016 at 02:29:38PM +0200, John Crispin wrote:

> >> This is a resend as V7 was dropped due to a merge order conflict.

> > What were the dependencies and why will simply resending this resolve
> > them?

> the dependency was the mt6323 support inside the mt6397 MFD device [1]
> and the headers that it included. this has been merged so the regulator
> driver is good to go for 4.8

No, that's not resolving the dependencies - if I apply these patches
without the dependencies in the regulator tree that will still break the
build for my tree until after the merge window.  It'll also break Linus'
tree if (as is normal) I send my pull requests early on.  I'd need to
merge the MFD commits into my tree which would need coordination with
Lee, he'd need to make a tag for me to pull in.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH V8 1/2] regulator: Add document for MT6323 regulator

[John Crispin]

On 11/07/2016 21:22, Mark Brown wrote:
> On Mon, Jul 11, 2016 at 08:55:24PM +0200, John Crispin wrote:
>> On 11/07/2016 20:08, Mark Brown wrote:
>>> On Mon, Jul 11, 2016 at 02:29:38PM +0200, John Crispin wrote:
> 
>>>> This is a resend as V7 was dropped due to a merge order conflict.
> 
>>> What were the dependencies and why will simply resending this resolve
>>> them?
> 
>> the dependency was the mt6323 support inside the mt6397 MFD device [1]
>> and the headers that it included. this has been merged so the regulator
>> driver is good to go for 4.8
> 
> No, that's not resolving the dependencies - if I apply these patches
> without the dependencies in the regulator tree that will still break the
> build for my tree until after the merge window.  It'll also break Linus'
> tree if (as is normal) I send my pull requests early on.  I'd need to
> merge the MFD commits into my tree which would need coordination with
> Lee, he'd need to make a tag for me to pull in.
> 

hi,

maybe i am missing something here, but i can see the dependencies inside
the for-next branch of
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git. is
this not the tree i should base patches on for v4.8 ?

	John

Re: [PATCH V8 1/2] regulator: Add document for MT6323 regulator

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 729 bytes --]

On Mon, Jul 11, 2016 at 10:31:45PM +0200, John Crispin wrote:

> maybe i am missing something here, but i can see the dependencies inside
> the for-next branch of
> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git. is
> this not the tree i should base patches on for v4.8 ?

Oh, so these aren't things that Lee just applied but rather things that
have propagated through?  You didn't say what commits you were talking
about, you linked to a long gitweb URL that would have been difficult to
paste due to wrapping.  This sort of thing is why it's really helpful to
make your e-mails directly human readable, saying something like "these
depend on change X which is in Linus' tree now" would've made this
clear.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH V8 2/2] regulator: mt6323: Add support for MT6323 regulator

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 825 bytes --]

On Mon, Jul 11, 2016 at 02:29:39PM +0200, John Crispin wrote:

> +static const struct of_device_id mt6323_of_match[] = {
> +	{ .compatible = "mediatek,mt6323-regulator", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_of_match);

This may have been answered last time but I don't remember - why is
there a compatible string for this device in the DT?  Surely we already
know that the regulators for the mt6323 are present by virtue of the
fact that we know that the core mt6323 is present in the system?
Indeed, looking at the now merged MFD code it appears that this is
in fact the case so we could just not have a compatible and perhaps this
was just an oversight.  This is good because it means we're not encoding
the specific way Linux instantiates devices into the DT.

Otherwise this does look good.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 473 bytes --]