[PATCH v8 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

[PATCH v8 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This patchset:
    (1)Preparation for adding GTDT support in arm_arch_timer:
        1. Move some enums and marcos to header file;
        2. Add a new enum for spi type;
        3. Improve printk relevant code;
        4. use readq to get 64-bit CNTVCT.

    (2)Introduce ACPI GTDT parser: drivers/acpi/arm64/acpi_gtdt.c
    Parse all kinds of timer in GTDT table of ACPI:arch timer,
    memory-mapped timer and SBSA Generic Watchdog timer.
    This driver can help to simplify all the relevant timer drivers,
    and separate all the ACPI GTDT knowledge from them.

    (3)Simplify ACPI code for arm_arch_timer

    (4)Add GTDT support for ARM memory-mapped timer

This patchset has been tested on the following platforms:
    (1)ARM Foundation v8 model

Changelog:
v8: https://lkml.org/lkml/2016/7/
    Improve "pr_fmt(fmt)" definition: add "ACPI" in front of "GTDT",
    and also improve printk message.
    Simplify is_timer_block and is_watchdog.
    Merge acpi_gtdt_desc_init and gtdt_arch_timer_init into acpi_gtdt_init();
    Delete __init in include/linux/acpi.h for GTDT API
    Make ARM64 select GTDT.
    Delete "#include <linux/module.h>" from acpi_gtdt.c
    Simplify GT block parse code.

v7: https://lkml.org/lkml/2016/7/13/769
    Move the GTDT driver to drivers/acpi/arm64
    Add add the ARM64-specific ACPI Support maintainers in MAINTAINERS
    Merge 3 patches of GTDT parser driver.
    Fix the for_each_platform_timer bug.

v6: https://lkml.org/lkml/2016/6/29/580
    split the GTDT driver to 4 parts: basic, arch_timer, memory-mapped timer,
    and SBSA Generic Watchdog timer
    Improve driver by suggestions and example code from Daniel Lezcano

v5: https://lkml.org/lkml/2016/5/24/356
    Sorting out all patches, simplify the API of GTDT driver:
    GTDT driver just fills the data struct for arm_arch_timer driver.

v4: https://lists.linaro.org/pipermail/linaro-acpi/2016-March/006667.html
    Delete the kvm relevant patches
    Separate two patches for sorting out the code for arm_arch_timer.
    Improve irq info export code to allow missing irq info in GTDT table.

v3: https://lkml.org/lkml/2016/2/1/658
    Improve GTDT driver code:
      (1)improve pr_* by defining pr_fmt(fmt)
      (2)simplify gtdt_sbsa_gwdt_init
      (3)improve gtdt_arch_timer_data_init, if table is NULL, it will try
      to get GTDT table.
    Move enum ppi_nr to arm_arch_timer.h, and add enum spi_nr.
    Add arm_arch_timer get ppi from DT and GTDT support for kvm.

v2: https://lkml.org/lkml/2015/12/2/10
    Rebase to latest kernel version(4.4-rc3).
    Fix the bug about the config problem,
    use CONFIG_ACPI_GTDT instead of CONFIG_ACPI in arm_arch_timer.c

v1: The first upstreaming version: https://lkml.org/lkml/2015/10/28/553

Fu Wei (9):
  clocksource/drivers/arm_arch_timer: Move enums and defines to header
    file
  clocksource/drivers/arm_arch_timer: Add a new enum for spi type
  clocksource/drivers/arm_arch_timer: Improve printk relevant code
  clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT
  acpi/arm64: Add GTDT table parse driver
  clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
  acpi/arm64: Add memory-mapped timer support in GTDT driver
  clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped
    timer
  acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver

 arch/arm64/Kconfig                   |   1 +
 drivers/acpi/Kconfig                 |   5 +
 drivers/acpi/Makefile                |   1 +
 drivers/acpi/arm64/Kconfig           |   5 +
 drivers/acpi/arm64/Makefile          |   1 +
 drivers/acpi/arm64/acpi_gtdt.c       | 312 +++++++++++++++++++++++++++++++++++
 drivers/clocksource/Kconfig          |   2 +-
 drivers/clocksource/arm_arch_timer.c | 233 +++++++++++++++++---------
 drivers/watchdog/Kconfig             |   1 +
 include/clocksource/arm_arch_timer.h |  32 ++++
 include/linux/acpi.h                 |   7 +
 11 files changed, 522 insertions(+), 78 deletions(-)
 create mode 100644 drivers/acpi/arm64/Kconfig
 create mode 100644 drivers/acpi/arm64/Makefile
 create mode 100644 drivers/acpi/arm64/acpi_gtdt.c

-- 
2.5.5

[PATCH v8 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

To support the arm_arch_timer via ACPI we need to share defines and enums
between the driver and the ACPI parser code.

Split out the relevant defines and enums into arm_arch_timer.h.
No functional change.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 11 -----------
 include/clocksource/arm_arch_timer.h | 11 +++++++++++
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 4814446..5d7272e 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -48,8 +48,6 @@
 #define CNTV_TVAL	0x38
 #define CNTV_CTL	0x3c
 
-#define ARCH_CP15_TIMER	BIT(0)
-#define ARCH_MEM_TIMER	BIT(1)
 static unsigned arch_timers_present __initdata;
 
 static void __iomem *arch_counter_base;
@@ -62,15 +60,6 @@ struct arch_timer {
 #define to_arch_timer(e) container_of(e, struct arch_timer, evt)
 
 static u32 arch_timer_rate;
-
-enum ppi_nr {
-	PHYS_SECURE_PPI,
-	PHYS_NONSECURE_PPI,
-	VIRT_PPI,
-	HYP_PPI,
-	MAX_TIMER_PPI
-};
-
 static int arch_timer_ppi[MAX_TIMER_PPI];
 
 static struct clock_event_device __percpu *arch_timer_evt;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index caedb74..6f06481 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -19,6 +19,9 @@
 #include <linux/timecounter.h>
 #include <linux/types.h>
 
+#define ARCH_CP15_TIMER			BIT(0)
+#define ARCH_MEM_TIMER			BIT(1)
+
 #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
 #define ARCH_TIMER_CTRL_IT_MASK		(1 << 1)
 #define ARCH_TIMER_CTRL_IT_STAT		(1 << 2)
@@ -34,6 +37,14 @@ enum arch_timer_reg {
 	ARCH_TIMER_REG_TVAL,
 };
 
+enum ppi_nr {
+	PHYS_SECURE_PPI,
+	PHYS_NONSECURE_PPI,
+	VIRT_PPI,
+	HYP_PPI,
+	MAX_TIMER_PPI
+};
+
 #define ARCH_TIMER_PHYS_ACCESS		0
 #define ARCH_TIMER_VIRT_ACCESS		1
 #define ARCH_TIMER_MEM_PHYS_ACCESS	2
-- 
2.5.5

[PATCH v8 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This patch add a new enum "spi_nr" and use it in the driver.
Just for code's readability, no functional change.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 4 ++--
 include/clocksource/arm_arch_timer.h | 6 ++++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5d7272e..966c574 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -826,9 +826,9 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	}
 
 	if (arch_timer_mem_use_virtual)
-		irq = irq_of_parse_and_map(best_frame, 1);
+		irq = irq_of_parse_and_map(best_frame, VIRT_SPI);
 	else
-		irq = irq_of_parse_and_map(best_frame, 0);
+		irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
 
 	if (!irq) {
 		pr_err("arch_timer: Frame missing %s irq",
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 6f06481..16dcd10 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -45,6 +45,12 @@ enum ppi_nr {
 	MAX_TIMER_PPI
 };
 
+enum spi_nr {
+	PHYS_SPI,
+	VIRT_SPI,
+	MAX_TIMER_SPI
+};
+
 #define ARCH_TIMER_PHYS_ACCESS		0
 #define ARCH_TIMER_VIRT_ACCESS		1
 #define ARCH_TIMER_MEM_PHYS_ACCESS	2
-- 
2.5.5

[PATCH v8 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This patch defines pr_fmt(fmt) for all pr_* functions,
then the pr_* doesn't need to add "arch_timer:" everytime.

Also delete some Blank Spaces in arch_timer_banner,
according to the suggestion from checkpatch.pl.

No functional change.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 53 ++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 26 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 966c574..e6fd42d 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -29,6 +29,9 @@
 
 #include <clocksource/arm_arch_timer.h>
 
+#undef pr_fmt
+#define pr_fmt(fmt) "arch_timer: " fmt
+
 #define CNTTIDR		0x08
 #define CNTTIDR_VIRT(n)	(BIT(1) << ((n) * 4))
 
@@ -388,24 +391,24 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
 
 	/* Check the timer frequency. */
 	if (arch_timer_rate == 0)
-		pr_warn("Architected timer frequency not available\n");
+		pr_warn("frequency not available\n");
 }
 
 static void arch_timer_banner(unsigned type)
 {
-	pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
-		     type & ARCH_CP15_TIMER ? "cp15" : "",
-		     type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  " and " : "",
-		     type & ARCH_MEM_TIMER ? "mmio" : "",
-		     (unsigned long)arch_timer_rate / 1000000,
-		     (unsigned long)(arch_timer_rate / 10000) % 100,
-		     type & ARCH_CP15_TIMER ?
-		     (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
-			"",
-		     type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  "/" : "",
-		     type & ARCH_MEM_TIMER ?
-			arch_timer_mem_use_virtual ? "virt" : "phys" :
-			"");
+	pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+		type & ARCH_CP15_TIMER ? "cp15" : "",
+		type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  " and " : "",
+		type & ARCH_MEM_TIMER ? "mmio" : "",
+		(unsigned long)arch_timer_rate / 1000000,
+		(unsigned long)(arch_timer_rate / 10000) % 100,
+		type & ARCH_CP15_TIMER ?
+		(arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+		"",
+		type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  "/" : "",
+		type & ARCH_MEM_TIMER ?
+		arch_timer_mem_use_virtual ? "virt" : "phys" :
+		"");
 }
 
 u32 arch_timer_get_rate(void)
@@ -498,8 +501,7 @@ static void __init arch_counter_register(unsigned type)
 
 static void arch_timer_stop(struct clock_event_device *clk)
 {
-	pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
-		 clk->irq, smp_processor_id());
+	pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());
 
 	disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
 	if (arch_timer_has_nonsecure_ppi())
@@ -597,8 +599,7 @@ static int __init arch_timer_register(void)
 	}
 
 	if (err) {
-		pr_err("arch_timer: can't register interrupt %d (%d)\n",
-		       ppi, err);
+		pr_err("can't register interrupt %d (%d)\n", ppi, err);
 		goto out_free;
 	}
 
@@ -650,7 +651,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
 
 	ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
 	if (ret) {
-		pr_err("arch_timer: Failed to request mem timer irq\n");
+		pr_err("Failed to request mem timer irq\n");
 		kfree(t);
 	}
 
@@ -727,7 +728,7 @@ static void __init arch_timer_init(void)
 		}
 
 		if (!has_ppi) {
-			pr_warn("arch_timer: No interrupt available, giving up\n");
+			pr_warn("No interrupt available, giving up\n");
 			return;
 		}
 	}
@@ -743,7 +744,7 @@ static void __init arch_timer_of_init(struct device_node *np)
 	int i;
 
 	if (arch_timers_present & ARCH_CP15_TIMER) {
-		pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+		pr_warn("multiple nodes in dt, skipping\n");
 		return;
 	}
 
@@ -778,7 +779,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 	arch_timers_present |= ARCH_MEM_TIMER;
 	cntctlbase = of_iomap(np, 0);
 	if (!cntctlbase) {
-		pr_err("arch_timer: Can't find CNTCTLBase\n");
+		pr_err("Can't find CNTCTLBase\n");
 		return;
 	}
 
@@ -793,7 +794,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 		u32 cntacr;
 
 		if (of_property_read_u32(frame, "frame-number", &n)) {
-			pr_err("arch_timer: Missing frame-number\n");
+			pr_err("Missing frame-number\n");
 			of_node_put(frame);
 			goto out;
 		}
@@ -821,7 +822,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 
 	base = arch_counter_base = of_iomap(best_frame, 0);
 	if (!base) {
-		pr_err("arch_timer: Can't map frame's registers\n");
+		pr_err("Can't map frame's registers\n");
 		goto out;
 	}
 
@@ -831,7 +832,7 @@ static void __init arch_timer_mem_init(struct device_node *np)
 		irq = irq_of_parse_and_map(best_frame, PHYS_SPI);
 
 	if (!irq) {
-		pr_err("arch_timer: Frame missing %s irq",
+		pr_err("Frame missing %s irq",
 		       arch_timer_mem_use_virtual ? "virt" : "phys");
 		goto out;
 	}
@@ -869,7 +870,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	struct acpi_table_gtdt *gtdt;
 
 	if (arch_timers_present & ARCH_CP15_TIMER) {
-		pr_warn("arch_timer: already initialized, skipping\n");
+		pr_warn("already initialized, skipping\n");
 		return -EINVAL;
 	}
 
-- 
2.5.5

[PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This patch simplify arch_counter_get_cntvct_mem function by
using readq to get 64-bit CNTVCT value instead of readl_relaxed.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index e6fd42d..483d2f9 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -418,15 +418,7 @@ u32 arch_timer_get_rate(void)
 
 static u64 arch_counter_get_cntvct_mem(void)
 {
-	u32 vct_lo, vct_hi, tmp_hi;
-
-	do {
-		vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
-		vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
-		tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
-	} while (vct_hi != tmp_hi);
-
-	return ((u64) vct_hi << 32) | vct_lo;
+	return readq(arch_counter_base + CNTVCT_LO);
 }
 
 /*
-- 
2.5.5

[PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This patch adds support for parsing arch timer in GTDT,
provides some kernel APIs to parse all the PPIs and
always-on info in GTDT and export them.

By this driver, we can simplify arm_arch_timer drivers, and
separate the ACPI GTDT knowledge from it.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/arm64/Kconfig             |   1 +
 drivers/acpi/Kconfig           |   5 ++
 drivers/acpi/Makefile          |   1 +
 drivers/acpi/arm64/Kconfig     |   5 ++
 drivers/acpi/arm64/Makefile    |   1 +
 drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++
 drivers/clocksource/Kconfig    |   1 -
 include/linux/acpi.h           |   6 ++
 8 files changed, 171 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5a0a691..0b9fba7 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2,6 +2,7 @@ config ARM64
 	def_bool y
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
+	select ACPI_GTDT if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b7e2e77..1cdc7d2 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION
 
 endif
 
+if ARM64
+source "drivers/acpi/arm64/Kconfig"
+
+endif
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 251ce85..1a94ff7 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
 obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
 obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
 obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
+obj-$(CONFIG_ARM64)	+= arm64/
 
 video-objs			+= acpi_video.o video_detect.o
diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
new file mode 100644
index 0000000..80201be
--- /dev/null
+++ b/drivers/acpi/arm64/Kconfig
@@ -0,0 +1,5 @@
+#
+# ACPI Configuration for ARM64
+#
+config ACPI_GTDT
+	bool
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
new file mode 100644
index 0000000..466de6b
--- /dev/null
+++ b/drivers/acpi/arm64/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ACPI_GTDT)		+= acpi_gtdt.o
diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
new file mode 100644
index 0000000..e1cfc9e
--- /dev/null
+++ b/drivers/acpi/arm64/acpi_gtdt.c
@@ -0,0 +1,152 @@
+/*
+ * ARM Specific GTDT table Support
+ *
+ * Copyright (C) 2016, Linaro Ltd.
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *         Fu Wei <fu.wei@linaro.org>
+ *         Hanjun Guo <hanjun.guo@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "ACPI GTDT: " fmt
+
+typedef struct {
+	struct acpi_table_gtdt *gtdt;
+	void *platform_timer_start;
+	void *gtdt_end;
+} acpi_gtdt_desc_t;
+
+static acpi_gtdt_desc_t acpi_gtdt_desc __initdata;
+
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer_start; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
+static inline bool is_watchdog(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_WATCHDOG;
+}
+
+static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
+{
+	int trigger, polarity;
+
+	if (!interrupt)
+		return 0;
+
+	trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
+			: ACPI_LEVEL_SENSITIVE;
+
+	polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
+			: ACPI_ACTIVE_HIGH;
+
+	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
+}
+
+/*
+ * Map the PPIs of per-cpu arch_timer.
+ * @type: the type of PPI
+ * Returns 0 if error.
+ */
+int __init acpi_gtdt_map_ppi(int type)
+{
+	struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
+
+	switch (type) {
+	case PHYS_SECURE_PPI:
+		return map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
+						   gtdt->secure_el1_flags);
+	case PHYS_NONSECURE_PPI:
+		return map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
+						   gtdt->non_secure_el1_flags);
+	case VIRT_PPI:
+		return map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
+						   gtdt->virtual_timer_flags);
+
+	case HYP_PPI:
+		return map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
+						   gtdt->non_secure_el2_flags);
+	default:
+		pr_err("Map PPI failed: invalid type.\n");
+	}
+
+	return 0;
+}
+
+/*
+ * acpi_gtdt_c3stop - got c3stop info from GTDT
+ *
+ * Returns 1 if the timer is powered in deep idle state, 0 otherwise.
+ */
+bool __init acpi_gtdt_c3stop(void)
+{
+	struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
+
+	return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+}
+
+/*
+ * Get some basic info from GTDT table, and init the global variables above
+ * for all timers initialization of Generic Timer.
+ * This function does some validation on GTDT table.
+ */
+int __init acpi_gtdt_init(struct acpi_table_header *table)
+{
+	void *start;
+	struct acpi_table_gtdt *gtdt;
+
+	gtdt = container_of(table, struct acpi_table_gtdt, header);
+
+	acpi_gtdt_desc.gtdt = gtdt;
+	acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
+
+	if (table->revision < 2) {
+		pr_debug("Revision:%d doesn't support Platform Timers.\n",
+			 table->revision);
+		return 0;
+	}
+
+	if (!gtdt->platform_timer_count) {
+		pr_debug("No Platform Timer.\n");
+		return 0;
+	}
+
+	start = (void *)gtdt + gtdt->platform_timer_offset;
+	if (start < (void *)table + sizeof(struct acpi_table_gtdt)) {
+		pr_err(FW_BUG "Failed to init table: ACPI/GTDT is buggy.\n");
+		return -EINVAL;
+	}
+	acpi_gtdt_desc.platform_timer_start = start;
+
+	return gtdt->platform_timer_count;
+}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 47352d2..108dbc3 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -205,7 +205,6 @@ config CLKSRC_MPS2
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF
-	select CLKSRC_ACPI if ACPI
 
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Support for ARM architected timer event stream generation"
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 288fac5..fb8b689 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -532,6 +532,12 @@ void acpi_walk_dep_device_list(acpi_handle handle);
 struct platform_device *acpi_create_platform_device(struct acpi_device *);
 #define ACPI_PTR(_ptr)	(_ptr)
 
+#ifdef CONFIG_ACPI_GTDT
+int acpi_gtdt_init(struct acpi_table_header *table);
+int acpi_gtdt_map_ppi(int type);
+bool acpi_gtdt_c3stop(void);
+#endif
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1
-- 
2.5.5

[PATCH v8 6/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

The patch update arm_arch_timer driver to use the function
provided by the new GTDT driver of ACPI.
By this way, arm_arch_timer.c can be simplified, and separate
all the ACPI GTDT knowledge from this timer driver.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/clocksource/Kconfig          |  1 +
 drivers/clocksource/arm_arch_timer.c | 48 +++++++++---------------------------
 2 files changed, 13 insertions(+), 36 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 108dbc3..61dc160 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -8,6 +8,7 @@ config CLKSRC_OF
 config CLKSRC_ACPI
 	bool
 	select CLKSRC_PROBE
+	select ACPI_GTDT if ARM64
 
 config CLKSRC_PROBE
 	bool
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 483d2f9..d285a87 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -839,60 +839,36 @@ out:
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
 
-#ifdef CONFIG_ACPI
-static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
-{
-	int trigger, polarity;
-
-	if (!interrupt)
-		return 0;
-
-	trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
-			: ACPI_LEVEL_SENSITIVE;
-
-	polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
-			: ACPI_ACTIVE_HIGH;
-
-	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
-}
-
+#ifdef CONFIG_ACPI_GTDT
 /* Initialize per-processor generic timer */
 static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 {
-	struct acpi_table_gtdt *gtdt;
+	int timer_count;
 
 	if (arch_timers_present & ARCH_CP15_TIMER) {
 		pr_warn("already initialized, skipping\n");
 		return -EINVAL;
 	}
 
-	gtdt = container_of(table, struct acpi_table_gtdt, header);
-
 	arch_timers_present |= ARCH_CP15_TIMER;
 
-	arch_timer_ppi[PHYS_SECURE_PPI] =
-		map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
-		gtdt->secure_el1_flags);
-
-	arch_timer_ppi[PHYS_NONSECURE_PPI] =
-		map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
-		gtdt->non_secure_el1_flags);
-
-	arch_timer_ppi[VIRT_PPI] =
-		map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
-		gtdt->virtual_timer_flags);
+	timer_count = acpi_gtdt_init(table);
 
-	arch_timer_ppi[HYP_PPI] =
-		map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
-		gtdt->non_secure_el2_flags);
+	arch_timer_ppi[PHYS_SECURE_PPI] = acpi_gtdt_map_ppi(PHYS_SECURE_PPI);
+	arch_timer_ppi[PHYS_NONSECURE_PPI] = acpi_gtdt_map_ppi(PHYS_NONSECURE_PPI);
+	arch_timer_ppi[VIRT_PPI] = acpi_gtdt_map_ppi(VIRT_PPI);
+	arch_timer_ppi[HYP_PPI] = acpi_gtdt_map_ppi(HYP_PPI);
+	/* Always-on capability */
+	arch_timer_c3stop = acpi_gtdt_c3stop();
 
 	/* Get the frequency from CNTFRQ */
 	arch_timer_detect_rate(NULL, NULL);
 
-	/* Always-on capability */
-	arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+	if (timer_count < 0)
+		pr_err("Failed to get platform timer info, skipping.\n");
 
 	arch_timer_init();
+
 	return 0;
 }
 CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
-- 
2.5.5

[PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This driver adds support for parsing memory-mapped timer in GTDT:
provide a kernel APIs to parse GT Block Structure in GTDT,
export all the info by filling the struct which provided
by parameter(pointer of the struct).

By this driver, we can add ACPI support for memory-mapped timer in
arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/acpi_gtdt.c       | 72 ++++++++++++++++++++++++++++++++++++
 include/clocksource/arm_arch_timer.h | 15 ++++++++
 include/linux/acpi.h                 |  1 +
 3 files changed, 88 insertions(+)

diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
index e1cfc9e..b48e443 100644
--- a/drivers/acpi/arm64/acpi_gtdt.c
+++ b/drivers/acpi/arm64/acpi_gtdt.c
@@ -150,3 +150,75 @@ int __init acpi_gtdt_init(struct acpi_table_header *table)
 
 	return gtdt->platform_timer_count;
 }
+
+static int __init gtdt_parse_gt_block(void *platform_timer,
+				      struct gt_block_data *data)
+{
+	struct acpi_gtdt_timer_block *block = platform_timer;
+	struct acpi_gtdt_timer_entry *frame;
+	int i;
+
+	if (!block || !data)
+		return -EINVAL;
+
+	if (!block->block_address || !block->timer_count)
+		goto error;
+
+	data->cntctlbase_phy = (phys_addr_t)block->block_address;
+	data->timer_count = block->timer_count;
+
+	frame = (void *)block + block->timer_offset;
+	if (frame + block->timer_count != (void *)block + block->header.length)
+		goto error;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0; i < block->timer_count; i++) {
+		frame += i;
+		if (!frame->base_address || !frame->timer_interrupt)
+			goto error;
+
+		data->timer[i].frame_nr = frame->frame_number;
+		data->timer[i].cntbase_phy = frame->base_address;
+		data->timer[i].irq =
+			map_generic_timer_interrupt(frame->timer_interrupt,
+						    frame->timer_flags);
+		if (frame->virtual_timer_interrupt)
+			data->timer[i].virt_irq =
+				map_generic_timer_interrupt(
+					frame->virtual_timer_interrupt,
+					frame->virtual_timer_flags);
+	}
+	return 0;
+
+error:
+	pr_err(FW_BUG "invalid GT Block data.\n");
+	return -EINVAL;
+}
+
+/*
+ * Get the GT block info for memory-mapped timer from GTDT table.
+ * Please make sure we have called acpi_gtdt_init, because it helps to
+ * init the global variables.
+ */
+int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
+{
+	void *platform_timer;
+	int index = 0;
+	int ret;
+
+	for_each_platform_timer(platform_timer) {
+		if (!is_timer_block(platform_timer))
+			continue;
+		ret = gtdt_parse_gt_block(platform_timer, data + index);
+		if (ret)
+			return ret;
+		index++;
+	}
+
+	if (index)
+		pr_info("found %d memory-mapped timer block(s).\n", index);
+
+	return index;
+}
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index 16dcd10..ece6b3b 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -56,6 +56,8 @@ enum spi_nr {
 #define ARCH_TIMER_MEM_PHYS_ACCESS	2
 #define ARCH_TIMER_MEM_VIRT_ACCESS	3
 
+#define ARCH_TIMER_MEM_MAX_FRAME	8
+
 #define ARCH_TIMER_USR_PCT_ACCESS_EN	(1 << 0) /* physical counter */
 #define ARCH_TIMER_USR_VCT_ACCESS_EN	(1 << 1) /* virtual counter */
 #define ARCH_TIMER_VIRT_EVT_EN		(1 << 2)
@@ -71,6 +73,19 @@ struct arch_timer_kvm_info {
 	int virtual_irq;
 };
 
+struct gt_timer_data {
+	int frame_nr;
+	phys_addr_t cntbase_phy;
+	int irq;
+	int virt_irq;
+};
+
+struct gt_block_data {
+	phys_addr_t cntctlbase_phy;
+	int timer_count;
+	struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME];
+};
+
 #ifdef CONFIG_ARM_ARCH_TIMER
 
 extern u32 arch_timer_get_rate(void);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index fb8b689..24b1750 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -536,6 +536,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
 int acpi_gtdt_init(struct acpi_table_header *table);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(void);
+int gtdt_arch_timer_mem_init(struct gt_block_data *data);
 #endif
 
 #else	/* !CONFIG_ACPI */
-- 
2.5.5

[PATCH v8 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

The patch add memory-mapped timer register support by using the information
provided by the new GTDT driver of ACPI.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 127 ++++++++++++++++++++++++++++++++++-
 1 file changed, 124 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d285a87..6468029 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -840,7 +840,128 @@ CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
 		       arch_timer_mem_init);
 
 #ifdef CONFIG_ACPI_GTDT
-/* Initialize per-processor generic timer */
+static struct gt_timer_data __init *arch_timer_mem_get_timer(
+						struct gt_block_data *gt_blocks)
+{
+	struct gt_block_data *gt_block = gt_blocks;
+	struct gt_timer_data *best_frame = NULL;
+	void __iomem *cntctlbase;
+	u32 cnttidr;
+	int i;
+
+	/*
+	 * According to ARMv8 Architecture Reference Manual(ARM),
+	 * the size of CNTCTLBase frame of memory-mapped timer
+	 * is SZ_4K(Offset 0x000 – 0xFFF).
+	 */
+	cntctlbase = ioremap(gt_block->cntctlbase_phy, SZ_4K);
+	if (!cntctlbase) {
+		pr_err("Failed to map mem timer control frame base address\n");
+		return NULL;
+	}
+	cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+
+	/*
+	 * Try to find a virtual capable frame. Otherwise fall back to a
+	 * physical capable frame.
+	 */
+	for (i = 0; i < gt_block->timer_count; i++) {
+		int n;
+		u32 cntacr;
+
+		n = gt_block->timer[i].frame_nr;
+
+		/* Try enabling everything, and see what sticks */
+		cntacr = CNTACR_RFRQ | CNTACR_RWPT | CNTACR_RPCT |
+			 CNTACR_RWVT | CNTACR_RVOFF | CNTACR_RVCT;
+		writel_relaxed(cntacr, cntctlbase + CNTACR(n));
+		cntacr = readl_relaxed(cntctlbase + CNTACR(n));
+
+		if ((cnttidr & CNTTIDR_VIRT(n)) &&
+		    !(~cntacr & (CNTACR_RWVT | CNTACR_RVCT))) {
+			best_frame = &gt_block->timer[i];
+			arch_timer_mem_use_virtual = true;
+			break;
+		}
+
+		if (~cntacr & (CNTACR_RWPT | CNTACR_RPCT))
+			continue;
+
+		best_frame = &gt_block->timer[i];
+	}
+	iounmap(cntctlbase);
+
+	return best_frame;
+}
+
+static int __init arch_timer_mem_acpi_init(size_t timer_count)
+{
+	struct gt_block_data *gt_blocks;
+	struct gt_timer_data *gt_timer;
+	void __iomem *timer_cntbase;
+	int ret = -EINVAL;
+	int timer_irq;
+
+	/*
+	 * If we don't have any Platform Timer Structures, just return.
+	 */
+	if (!timer_count)
+		return 0;
+
+	/*
+	 * before really check all the Platform Timer Structures,
+	 * we assume they are GT block, and allocate memory for them.
+	 * We will free these memory once we finish the initialization.
+	 */
+	gt_blocks = kcalloc(timer_count, sizeof(*gt_blocks), GFP_KERNEL);
+	if (!gt_blocks)
+		return -ENOMEM;
+
+	if (gtdt_arch_timer_mem_init(gt_blocks) > 0) {
+		gt_timer = arch_timer_mem_get_timer(gt_blocks);
+		if (!gt_timer) {
+			pr_err("Failed to get mem timer info.\n");
+			goto error;
+		}
+
+		if (arch_timer_mem_use_virtual)
+			timer_irq = gt_timer->virt_irq;
+		else
+			timer_irq = gt_timer->irq;
+		if (!timer_irq) {
+			pr_err("Failed to get %s irq for mem timer.",
+			       arch_timer_mem_use_virtual ? "virt" : "phys");
+			goto error;
+		}
+
+		/*
+		 * According to ARMv8 Architecture Reference Manual(ARM),
+		 * the size of CNTBaseN frames of memory-mapped timer
+		 * is SZ_4K(Offset 0x000 – 0xFFF).
+		 */
+		timer_cntbase = ioremap(gt_timer->cntbase_phy, SZ_4K);
+		if (!timer_cntbase) {
+			pr_err("Failed to map mem timer base address.\n");
+			goto error;
+		}
+
+		ret = arch_timer_mem_register(timer_cntbase, timer_irq);
+		if (ret) {
+			iounmap(timer_cntbase);
+			pr_err("Failed to register mem timer.\n");
+			goto error;
+		}
+
+		arch_counter_base = timer_cntbase;
+		arch_timers_present |= ARCH_MEM_TIMER;
+	}
+
+error:
+	kfree(gt_blocks);
+	return ret;
+}
+
+/* Initialize per-processor generic timer and memory-mapped timer(if present) */
 static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 {
 	int timer_count;
@@ -864,8 +985,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	/* Get the frequency from CNTFRQ */
 	arch_timer_detect_rate(NULL, NULL);
 
-	if (timer_count < 0)
-		pr_err("Failed to get platform timer info, skipping.\n");
+	if (timer_count < 0 || arch_timer_mem_acpi_init((size_t)timer_count))
+		pr_err("Failed to initialize memory-mapped timer, skipping.\n");
 
 	arch_timer_init();
 
-- 
2.5.5

[PATCH v8 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver

[fu.wei]

From: Fu Wei <fu.wei@linaro.org>

This driver adds support for parsing SBSA Generic Watchdog timer
in GTDT, parse all info in SBSA Generic Watchdog Structure in GTDT,
and creating a platform device with that information.

This allows the operating system to obtain device data from the
resource of platform device. The platform device named "sbsa-gwdt"
can be used by the ARM SBSA Generic Watchdog driver.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/acpi_gtdt.c | 88 ++++++++++++++++++++++++++++++++++++++++++
 drivers/watchdog/Kconfig       |  1 +
 2 files changed, 89 insertions(+)

diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
index b48e443..45ac0f8 100644
--- a/drivers/acpi/arm64/acpi_gtdt.c
+++ b/drivers/acpi/arm64/acpi_gtdt.c
@@ -14,6 +14,7 @@
 #include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
 #include <clocksource/arm_arch_timer.h>
 
@@ -222,3 +223,90 @@ int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
 
 	return index;
 }
+
+/*
+ * Initialize a SBSA generic Watchdog platform device info from GTDT
+ */
+static int __init gtdt_import_sbsa_gwdt(void *platform_timer, int index)
+{
+	struct platform_device *pdev;
+	struct acpi_gtdt_watchdog *wd = platform_timer;
+	int irq = map_generic_timer_interrupt(wd->timer_interrupt,
+					      wd->timer_flags);
+	int no_irq = 1;
+
+	/*
+	 * According to SBSA specification the size of refresh and control
+	 * frames of SBSA Generic Watchdog is SZ_4K(Offset 0x000 – 0xFFF).
+	 */
+	struct resource res[] = {
+		DEFINE_RES_MEM(wd->control_frame_address, SZ_4K),
+		DEFINE_RES_MEM(wd->refresh_frame_address, SZ_4K),
+		DEFINE_RES_IRQ(irq),
+	};
+
+	pr_debug("found a Watchdog (0x%llx/0x%llx gsi:%u flags:0x%x).\n",
+		 wd->refresh_frame_address, wd->control_frame_address,
+		 wd->timer_interrupt, wd->timer_flags);
+
+	if (!(wd->refresh_frame_address && wd->control_frame_address)) {
+		pr_err(FW_BUG "failed to get the Watchdog base address.\n");
+		return -EINVAL;
+	}
+
+	if (!wd->timer_interrupt)
+		pr_warn(FW_BUG "failed to get the Watchdog interrupt.\n");
+	else if (irq <= 0)
+		pr_warn("failed to map the Watchdog interrupt.\n");
+	else
+		no_irq = 0;
+
+	/*
+	 * Add a platform device named "sbsa-gwdt" to match the platform driver.
+	 * "sbsa-gwdt": SBSA(Server Base System Architecture) Generic Watchdog
+	 * The platform driver (like drivers/watchdog/sbsa_gwdt.c)can get device
+	 * info below by matching this name.
+	 */
+	pdev = platform_device_register_simple("sbsa-gwdt", index, res,
+					       ARRAY_SIZE(res) - no_irq);
+	if (IS_ERR(pdev)) {
+		acpi_unregister_gsi(wd->timer_interrupt);
+		return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+
+static int __init gtdt_sbsa_gwdt_init(void)
+{
+	struct acpi_table_header *table;
+	void *platform_timer;
+	int index = 0;
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_GTDT, 0, &table)))
+		return -EINVAL;
+
+	ret = acpi_gtdt_init(table);
+	if (ret <= 0)
+		return ret;
+
+	for_each_platform_timer(platform_timer) {
+		if (!is_watchdog(platform_timer))
+			continue;
+		ret = gtdt_import_sbsa_gwdt(platform_timer, index);
+		if (ret)
+			break;
+		index++;
+	}
+
+	if (index)
+		pr_info("found %d SBSA generic Watchdog(s).\n", index);
+
+	return ret;
+}
+
+device_initcall(gtdt_sbsa_gwdt_init);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b4b3e25..4019792 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -206,6 +206,7 @@ config ARM_SBSA_WATCHDOG
 	tristate "ARM SBSA Generic Watchdog"
 	depends on ARM64
 	depends on ARM_ARCH_TIMER
+	depends on ACPI_GTDT || !ACPI
 	select WATCHDOG_CORE
 	help
 	  ARM SBSA Generic Watchdog has two stage timeouts:
-- 
2.5.5

Re: [PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver

[Lorenzo Pieralisi]

On Wed, Jul 20, 2016 at 02:18:02AM +0800, fu.wei@linaro.org wrote:
> From: Fu Wei <fu.wei@linaro.org>
> 
> This driver adds support for parsing memory-mapped timer in GTDT:
> provide a kernel APIs to parse GT Block Structure in GTDT,
> export all the info by filling the struct which provided
> by parameter(pointer of the struct).
> 
> By this driver, we can add ACPI support for memory-mapped timer in
> arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.

"On platforms booting with ACPI, architected memory timers configuration
data is provided by firmware through the ACPI GTDT static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver;
this infrastructure is present for device tree systems but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration."

> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  drivers/acpi/arm64/acpi_gtdt.c       | 72 ++++++++++++++++++++++++++++++++++++
>  include/clocksource/arm_arch_timer.h | 15 ++++++++
>  include/linux/acpi.h                 |  1 +
>  3 files changed, 88 insertions(+)
> 
> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
> index e1cfc9e..b48e443 100644
> --- a/drivers/acpi/arm64/acpi_gtdt.c
> +++ b/drivers/acpi/arm64/acpi_gtdt.c
> @@ -150,3 +150,75 @@ int __init acpi_gtdt_init(struct acpi_table_header *table)
>  
>  	return gtdt->platform_timer_count;
>  }
> +
> +static int __init gtdt_parse_gt_block(void *platform_timer,
> +				      struct gt_block_data *data)
> +{

Nit: you can directly pass a struct acpi_gtdt_timer_block* pointer.

> +	struct acpi_gtdt_timer_block *block = platform_timer;
> +	struct acpi_gtdt_timer_entry *frame;
> +	int i;
> +
> +	if (!block || !data)
> +		return -EINVAL;
> +
> +	if (!block->block_address || !block->timer_count)
> +		goto error;

Here we jump to print an error and bail out. The only reason
why we need a goto is to print a common error message and that's
exactly what we do _not_ need, if there is a FW error we want
to understand which one is that, otherwise the information you
are printing is useless for debugging (provided we can make use
of this info, which is questionable anyway).

> +	data->cntctlbase_phy = (phys_addr_t)block->block_address;
> +	data->timer_count = block->timer_count;
> +
> +	frame = (void *)block + block->timer_offset;
> +	if (frame + block->timer_count != (void *)block + block->header.length)
> +		goto error;

See above.

> +	/*
> +	 * Get the GT timer Frame data for every GT Block Timer
> +	 */
> +	for (i = 0; i < block->timer_count; i++) {
> +		frame += i;

This is wrong, if you have multiple frames, pointers would add up and
that's not correct.

> +		if (!frame->base_address || !frame->timer_interrupt)
> +			goto error;

See above.

> +		data->timer[i].frame_nr = frame->frame_number;
> +		data->timer[i].cntbase_phy = frame->base_address;
> +		data->timer[i].irq =
> +			map_generic_timer_interrupt(frame->timer_interrupt,
> +						    frame->timer_flags);

AFAIK map_generic_timer_interrupt() may fail, you should cater for that.

> +		if (frame->virtual_timer_interrupt)
> +			data->timer[i].virt_irq =
> +				map_generic_timer_interrupt(
> +					frame->virtual_timer_interrupt,
> +					frame->virtual_timer_flags);

Ditto.

> +	}
> +	return 0;
> +
> +error:
> +	pr_err(FW_BUG "invalid GT Block data.\n");
> +	return -EINVAL;

See above.

> +}
> +
> +/*
> + * Get the GT block info for memory-mapped timer from GTDT table.
> + * Please make sure we have called acpi_gtdt_init, because it helps to
> + * init the global variables.

I already commented on this. I think the second part of this comment
is useless (it is a function with one caller, make sure you respect
the calling sequence and be done with this).

Thanks,
Lorenzo

> + */
> +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
> +{
> +	void *platform_timer;
> +	int index = 0;
> +	int ret;
> +
> +	for_each_platform_timer(platform_timer) {
> +		if (!is_timer_block(platform_timer))
> +			continue;
> +		ret = gtdt_parse_gt_block(platform_timer, data + index);
> +		if (ret)
> +			return ret;
> +		index++;
> +	}
> +
> +	if (index)
> +		pr_info("found %d memory-mapped timer block(s).\n", index);
> +
> +	return index;
> +}
> diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
> index 16dcd10..ece6b3b 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -56,6 +56,8 @@ enum spi_nr {
>  #define ARCH_TIMER_MEM_PHYS_ACCESS	2
>  #define ARCH_TIMER_MEM_VIRT_ACCESS	3
>  
> +#define ARCH_TIMER_MEM_MAX_FRAME	8
> +
>  #define ARCH_TIMER_USR_PCT_ACCESS_EN	(1 << 0) /* physical counter */
>  #define ARCH_TIMER_USR_VCT_ACCESS_EN	(1 << 1) /* virtual counter */
>  #define ARCH_TIMER_VIRT_EVT_EN		(1 << 2)
> @@ -71,6 +73,19 @@ struct arch_timer_kvm_info {
>  	int virtual_irq;
>  };
>  
> +struct gt_timer_data {
> +	int frame_nr;
> +	phys_addr_t cntbase_phy;
> +	int irq;
> +	int virt_irq;
> +};
> +
> +struct gt_block_data {
> +	phys_addr_t cntctlbase_phy;
> +	int timer_count;
> +	struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME];
> +};
> +
>  #ifdef CONFIG_ARM_ARCH_TIMER
>  
>  extern u32 arch_timer_get_rate(void);
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index fb8b689..24b1750 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -536,6 +536,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
>  int acpi_gtdt_init(struct acpi_table_header *table);
>  int acpi_gtdt_map_ppi(int type);
>  bool acpi_gtdt_c3stop(void);
> +int gtdt_arch_timer_mem_init(struct gt_block_data *data);
>  #endif
>  
>  #else	/* !CONFIG_ACPI */
> -- 
> 2.5.5
> 

Re: [PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver

[Rafael J. Wysocki]

On Wednesday, July 20, 2016 02:18:00 AM fu.wei@linaro.org wrote:
> From: Fu Wei <fu.wei@linaro.org>
> 
> This patch adds support for parsing arch timer in GTDT,
> provides some kernel APIs to parse all the PPIs and
> always-on info in GTDT and export them.
> 
> By this driver, we can simplify arm_arch_timer drivers, and
> separate the ACPI GTDT knowledge from it.
> 
> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> ---
>  arch/arm64/Kconfig             |   1 +
>  drivers/acpi/Kconfig           |   5 ++
>  drivers/acpi/Makefile          |   1 +
>  drivers/acpi/arm64/Kconfig     |   5 ++
>  drivers/acpi/arm64/Makefile    |   1 +
>  drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++
>  drivers/clocksource/Kconfig    |   1 -
>  include/linux/acpi.h           |   6 ++
>  8 files changed, 171 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 5a0a691..0b9fba7 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -2,6 +2,7 @@ config ARM64
>  	def_bool y
>  	select ACPI_CCA_REQUIRED if ACPI
>  	select ACPI_GENERIC_GSI if ACPI
> +	select ACPI_GTDT if ACPI
>  	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>  	select ARCH_HAS_DEVMEM_IS_ALLOWED
>  	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index b7e2e77..1cdc7d2 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION
>  
>  endif
>  
> +if ARM64
> +source "drivers/acpi/arm64/Kconfig"
> +
> +endif
> +
>  endif	# ACPI
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 251ce85..1a94ff7 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
>  obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
>  obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
>  obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
> +obj-$(CONFIG_ARM64)	+= arm64/
>  
>  video-objs			+= acpi_video.o video_detect.o
> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
> new file mode 100644
> index 0000000..80201be
> --- /dev/null
> +++ b/drivers/acpi/arm64/Kconfig
> @@ -0,0 +1,5 @@
> +#
> +# ACPI Configuration for ARM64
> +#
> +config ACPI_GTDT
> +	bool
> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
> new file mode 100644
> index 0000000..466de6b
> --- /dev/null
> +++ b/drivers/acpi/arm64/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ACPI_GTDT)		+= acpi_gtdt.o
> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
> new file mode 100644
> index 0000000..e1cfc9e
> --- /dev/null
> +++ b/drivers/acpi/arm64/acpi_gtdt.c
> @@ -0,0 +1,152 @@
> +/*
> + * ARM Specific GTDT table Support
> + *
> + * Copyright (C) 2016, Linaro Ltd.
> + * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
> + *         Fu Wei <fu.wei@linaro.org>
> + *         Hanjun Guo <hanjun.guo@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +
> +#include <clocksource/arm_arch_timer.h>
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "ACPI GTDT: " fmt
> +
> +typedef struct {
> +	struct acpi_table_gtdt *gtdt;
> +	void *platform_timer_start;
> +	void *gtdt_end;
> +} acpi_gtdt_desc_t;
> +
> +static acpi_gtdt_desc_t acpi_gtdt_desc __initdata;
> +
> +static inline void *next_platform_timer(void *platform_timer)
> +{
> +	struct acpi_gtdt_header *gh = platform_timer;
> +
> +	platform_timer += gh->length;
> +	if (platform_timer < acpi_gtdt_desc.gtdt_end)
> +		return platform_timer;
> +
> +	return NULL;
> +}
> +
> +#define for_each_platform_timer(_g)				\
> +	for (_g = acpi_gtdt_desc.platform_timer_start; _g;	\
> +	     _g = next_platform_timer(_g))
> +
> +static inline bool is_timer_block(void *platform_timer)
> +{
> +	struct acpi_gtdt_header *gh = platform_timer;
> +
> +	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
> +}
> +
> +static inline bool is_watchdog(void *platform_timer)
> +{
> +	struct acpi_gtdt_header *gh = platform_timer;
> +
> +	return gh->type == ACPI_GTDT_TYPE_WATCHDOG;
> +}
> +
> +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
> +{
> +	int trigger, polarity;
> +
> +	if (!interrupt)
> +		return 0;
> +
> +	trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
> +			: ACPI_LEVEL_SENSITIVE;
> +
> +	polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
> +			: ACPI_ACTIVE_HIGH;
> +
> +	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
> +}
> +
> +/*
> + * Map the PPIs of per-cpu arch_timer.
> + * @type: the type of PPI
> + * Returns 0 if error.
> + */
> +int __init acpi_gtdt_map_ppi(int type)
> +{
> +	struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
> +
> +	switch (type) {
> +	case PHYS_SECURE_PPI:
> +		return map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
> +						   gtdt->secure_el1_flags);
> +	case PHYS_NONSECURE_PPI:
> +		return map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
> +						   gtdt->non_secure_el1_flags);
> +	case VIRT_PPI:
> +		return map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
> +						   gtdt->virtual_timer_flags);
> +
> +	case HYP_PPI:
> +		return map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
> +						   gtdt->non_secure_el2_flags);
> +	default:
> +		pr_err("Map PPI failed: invalid type.\n");
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * acpi_gtdt_c3stop - got c3stop info from GTDT
> + *
> + * Returns 1 if the timer is powered in deep idle state, 0 otherwise.
> + */
> +bool __init acpi_gtdt_c3stop(void)
> +{
> +	struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
> +
> +	return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
> +}
> +
> +/*
> + * Get some basic info from GTDT table, and init the global variables above
> + * for all timers initialization of Generic Timer.
> + * This function does some validation on GTDT table.
> + */
> +int __init acpi_gtdt_init(struct acpi_table_header *table)
> +{
> +	void *start;
> +	struct acpi_table_gtdt *gtdt;
> +
> +	gtdt = container_of(table, struct acpi_table_gtdt, header);
> +
> +	acpi_gtdt_desc.gtdt = gtdt;
> +	acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
> +
> +	if (table->revision < 2) {
> +		pr_debug("Revision:%d doesn't support Platform Timers.\n",
> +			 table->revision);
> +		return 0;
> +	}
> +
> +	if (!gtdt->platform_timer_count) {
> +		pr_debug("No Platform Timer.\n");
> +		return 0;
> +	}
> +
> +	start = (void *)gtdt + gtdt->platform_timer_offset;
> +	if (start < (void *)table + sizeof(struct acpi_table_gtdt)) {
> +		pr_err(FW_BUG "Failed to init table: ACPI/GTDT is buggy.\n");

I would prefer something like

		pr_err(FW_BUG "Failed to retrieve timer information from firmware (invalid data)\n");

which is clear enough IMO and doesn't require whoever reads this message
to know anything about ACPI/GTDT etc.

Thanks,
Rafael

Re: [PATCH v8 5/9] acpi/arm64: Add GTDT table parse driver

[Fu Wei]

Hi Rafael,

On 21 July 2016 at 21:28, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> On Wednesday, July 20, 2016 02:18:00 AM fu.wei@linaro.org wrote:
>> From: Fu Wei <fu.wei@linaro.org>
>>
>> This patch adds support for parsing arch timer in GTDT,
>> provides some kernel APIs to parse all the PPIs and
>> always-on info in GTDT and export them.
>>
>> By this driver, we can simplify arm_arch_timer drivers, and
>> separate the ACPI GTDT knowledge from it.
>>
>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>  arch/arm64/Kconfig             |   1 +
>>  drivers/acpi/Kconfig           |   5 ++
>>  drivers/acpi/Makefile          |   1 +
>>  drivers/acpi/arm64/Kconfig     |   5 ++
>>  drivers/acpi/arm64/Makefile    |   1 +
>>  drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++
>>  drivers/clocksource/Kconfig    |   1 -
>>  include/linux/acpi.h           |   6 ++
>>  8 files changed, 171 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 5a0a691..0b9fba7 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -2,6 +2,7 @@ config ARM64
>>       def_bool y
>>       select ACPI_CCA_REQUIRED if ACPI
>>       select ACPI_GENERIC_GSI if ACPI
>> +     select ACPI_GTDT if ACPI
>>       select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>>       select ARCH_HAS_DEVMEM_IS_ALLOWED
>>       select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
>> index b7e2e77..1cdc7d2 100644
>> --- a/drivers/acpi/Kconfig
>> +++ b/drivers/acpi/Kconfig
>> @@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION
>>
>>  endif
>>
>> +if ARM64
>> +source "drivers/acpi/arm64/Kconfig"
>> +
>> +endif
>> +
>>  endif        # ACPI
>> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
>> index 251ce85..1a94ff7 100644
>> --- a/drivers/acpi/Makefile
>> +++ b/drivers/acpi/Makefile
>> @@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG)   += acpi_extlog.o
>>  obj-$(CONFIG_PMIC_OPREGION)  += pmic/intel_pmic.o
>>  obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
>>  obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
>> +obj-$(CONFIG_ARM64)  += arm64/
>>
>>  video-objs                   += acpi_video.o video_detect.o
>> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
>> new file mode 100644
>> index 0000000..80201be
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/Kconfig
>> @@ -0,0 +1,5 @@
>> +#
>> +# ACPI Configuration for ARM64
>> +#
>> +config ACPI_GTDT
>> +     bool
>> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
>> new file mode 100644
>> index 0000000..466de6b
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/Makefile
>> @@ -0,0 +1 @@
>> +obj-$(CONFIG_ACPI_GTDT)              += acpi_gtdt.o
>> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
>> new file mode 100644
>> index 0000000..e1cfc9e
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/acpi_gtdt.c
>> @@ -0,0 +1,152 @@
>> +/*
>> + * ARM Specific GTDT table Support
>> + *
>> + * Copyright (C) 2016, Linaro Ltd.
>> + * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
>> + *         Fu Wei <fu.wei@linaro.org>
>> + *         Hanjun Guo <hanjun.guo@linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/acpi.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +
>> +#include <clocksource/arm_arch_timer.h>
>> +
>> +#undef pr_fmt
>> +#define pr_fmt(fmt) "ACPI GTDT: " fmt
>> +
>> +typedef struct {
>> +     struct acpi_table_gtdt *gtdt;
>> +     void *platform_timer_start;
>> +     void *gtdt_end;
>> +} acpi_gtdt_desc_t;
>> +
>> +static acpi_gtdt_desc_t acpi_gtdt_desc __initdata;
>> +
>> +static inline void *next_platform_timer(void *platform_timer)
>> +{
>> +     struct acpi_gtdt_header *gh = platform_timer;
>> +
>> +     platform_timer += gh->length;
>> +     if (platform_timer < acpi_gtdt_desc.gtdt_end)
>> +             return platform_timer;
>> +
>> +     return NULL;
>> +}
>> +
>> +#define for_each_platform_timer(_g)                          \
>> +     for (_g = acpi_gtdt_desc.platform_timer_start; _g;      \
>> +          _g = next_platform_timer(_g))
>> +
>> +static inline bool is_timer_block(void *platform_timer)
>> +{
>> +     struct acpi_gtdt_header *gh = platform_timer;
>> +
>> +     return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
>> +}
>> +
>> +static inline bool is_watchdog(void *platform_timer)
>> +{
>> +     struct acpi_gtdt_header *gh = platform_timer;
>> +
>> +     return gh->type == ACPI_GTDT_TYPE_WATCHDOG;
>> +}
>> +
>> +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
>> +{
>> +     int trigger, polarity;
>> +
>> +     if (!interrupt)
>> +             return 0;
>> +
>> +     trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
>> +                     : ACPI_LEVEL_SENSITIVE;
>> +
>> +     polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
>> +                     : ACPI_ACTIVE_HIGH;
>> +
>> +     return acpi_register_gsi(NULL, interrupt, trigger, polarity);
>> +}
>> +
>> +/*
>> + * Map the PPIs of per-cpu arch_timer.
>> + * @type: the type of PPI
>> + * Returns 0 if error.
>> + */
>> +int __init acpi_gtdt_map_ppi(int type)
>> +{
>> +     struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
>> +
>> +     switch (type) {
>> +     case PHYS_SECURE_PPI:
>> +             return map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
>> +                                                gtdt->secure_el1_flags);
>> +     case PHYS_NONSECURE_PPI:
>> +             return map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
>> +                                                gtdt->non_secure_el1_flags);
>> +     case VIRT_PPI:
>> +             return map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
>> +                                                gtdt->virtual_timer_flags);
>> +
>> +     case HYP_PPI:
>> +             return map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
>> +                                                gtdt->non_secure_el2_flags);
>> +     default:
>> +             pr_err("Map PPI failed: invalid type.\n");
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * acpi_gtdt_c3stop - got c3stop info from GTDT
>> + *
>> + * Returns 1 if the timer is powered in deep idle state, 0 otherwise.
>> + */
>> +bool __init acpi_gtdt_c3stop(void)
>> +{
>> +     struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
>> +
>> +     return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
>> +}
>> +
>> +/*
>> + * Get some basic info from GTDT table, and init the global variables above
>> + * for all timers initialization of Generic Timer.
>> + * This function does some validation on GTDT table.
>> + */
>> +int __init acpi_gtdt_init(struct acpi_table_header *table)
>> +{
>> +     void *start;
>> +     struct acpi_table_gtdt *gtdt;
>> +
>> +     gtdt = container_of(table, struct acpi_table_gtdt, header);
>> +
>> +     acpi_gtdt_desc.gtdt = gtdt;
>> +     acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
>> +
>> +     if (table->revision < 2) {
>> +             pr_debug("Revision:%d doesn't support Platform Timers.\n",
>> +                      table->revision);
>> +             return 0;
>> +     }
>> +
>> +     if (!gtdt->platform_timer_count) {
>> +             pr_debug("No Platform Timer.\n");
>> +             return 0;
>> +     }
>> +
>> +     start = (void *)gtdt + gtdt->platform_timer_offset;
>> +     if (start < (void *)table + sizeof(struct acpi_table_gtdt)) {
>> +             pr_err(FW_BUG "Failed to init table: ACPI/GTDT is buggy.\n");
>
> I would prefer something like
>
>                 pr_err(FW_BUG "Failed to retrieve timer information from firmware (invalid data)\n");
>
> which is clear enough IMO and doesn't require whoever reads this message
> to know anything about ACPI/GTDT etc.

OK, NP, I will do, and Thanks for your suggestion :-)
I will also check other pr_* , see If I can update them

thanks

>
> Thanks,
> Rafael
>



-- 
Best regards,

Fu Wei
Software Engineer
Red Hat

Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1593 bytes --]

Hi,

[auto build test ERROR on stable/master]
[cannot apply to tip/timers/core pm/linux-next next-20160724]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/fu-wei-linaro-org/acpi-clocksource-add-GTDT-driver-and-GTDT-support-in-arm_arch_timer/20160725-022614
base:   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git master
config: arm-sunxi_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

   drivers/clocksource/arm_arch_timer.c: In function 'arch_counter_get_cntvct_mem':
>> drivers/clocksource/arm_arch_timer.c:421:9: error: implicit declaration of function 'readq' [-Werror=implicit-function-declaration]
     return readq(arch_counter_base + CNTVCT_LO);
            ^
   cc1: some warnings being treated as errors

vim +/readq +421 drivers/clocksource/arm_arch_timer.c

   415	{
   416		return arch_timer_rate;
   417	}
   418	
   419	static u64 arch_counter_get_cntvct_mem(void)
   420	{
 > 421		return readq(arch_counter_base + CNTVCT_LO);
   422	}
   423	
   424	/*

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 19385 bytes --]

Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT

[Will Deacon]

On Wed, Jul 20, 2016 at 02:17:59AM +0800, fu.wei@linaro.org wrote:
> From: Fu Wei <fu.wei@linaro.org>
> 
> This patch simplify arch_counter_get_cntvct_mem function by
> using readq to get 64-bit CNTVCT value instead of readl_relaxed.
> 
> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> ---
>  drivers/clocksource/arm_arch_timer.c | 10 +---------
>  1 file changed, 1 insertion(+), 9 deletions(-)
> 
> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
> index e6fd42d..483d2f9 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -418,15 +418,7 @@ u32 arch_timer_get_rate(void)
>  
>  static u64 arch_counter_get_cntvct_mem(void)
>  {
> -	u32 vct_lo, vct_hi, tmp_hi;
> -
> -	do {
> -		vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
> -		vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
> -		tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
> -	} while (vct_hi != tmp_hi);
> -
> -	return ((u64) vct_hi << 32) | vct_lo;
> +	return readq(arch_counter_base + CNTVCT_LO);

What's the benefit of doing this? If you use readq here, how can we
guarantee that (a) the endpoint won't generate a SLVERR or similar and
(b) that we get an atomic read?

"If it ain't broke, don't fix it"

Will

Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT

[Fu Wei]

Hi Will,

On 25 July 2016 at 17:02, Will Deacon <will.deacon@arm.com> wrote:
> On Wed, Jul 20, 2016 at 02:17:59AM +0800, fu.wei@linaro.org wrote:
>> From: Fu Wei <fu.wei@linaro.org>
>>
>> This patch simplify arch_counter_get_cntvct_mem function by
>> using readq to get 64-bit CNTVCT value instead of readl_relaxed.
>>
>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>> ---
>>  drivers/clocksource/arm_arch_timer.c | 10 +---------
>>  1 file changed, 1 insertion(+), 9 deletions(-)
>>
>> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
>> index e6fd42d..483d2f9 100644
>> --- a/drivers/clocksource/arm_arch_timer.c
>> +++ b/drivers/clocksource/arm_arch_timer.c
>> @@ -418,15 +418,7 @@ u32 arch_timer_get_rate(void)
>>
>>  static u64 arch_counter_get_cntvct_mem(void)
>>  {
>> -     u32 vct_lo, vct_hi, tmp_hi;
>> -
>> -     do {
>> -             vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
>> -             vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
>> -             tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
>> -     } while (vct_hi != tmp_hi);
>> -
>> -     return ((u64) vct_hi << 32) | vct_lo;
>> +     return readq(arch_counter_base + CNTVCT_LO);
>

Sorry, right after posting v9, I got your comment,

> What's the benefit of doing this? If you use readq here, how can we

benefit:
1. simplify the code
2. from arch/arm64/include/asm/io.h, I guess readq is more efficient

> guarantee that (a) the endpoint won't generate a SLVERR or similar and
> (b) that we get ?

I think so, according to arch/arm64/include/asm/io.h.
readq Implement by "LDR" and "LDAR", So I think It is an atomic read.

Please correct me, If I misunderstand something, thanks

>
> "If it ain't broke, don't fix it"
>
> Will



-- 
Best regards,

Fu Wei
Software Engineer
Red Hat

Re: [PATCH v8 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver

[Fu Wei]

Hi Lorenzo,

On 21 July 2016 at 20:40, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote:
> On Wed, Jul 20, 2016 at 02:18:02AM +0800, fu.wei@linaro.org wrote:
>> From: Fu Wei <fu.wei@linaro.org>
>>
>> This driver adds support for parsing memory-mapped timer in GTDT:
>> provide a kernel APIs to parse GT Block Structure in GTDT,
>> export all the info by filling the struct which provided
>> by parameter(pointer of the struct).
>>
>> By this driver, we can add ACPI support for memory-mapped timer in
>> arm_arch_timer drivers, and separate the ACPI GTDT knowledge from it.
>
> "On platforms booting with ACPI, architected memory timers configuration
> data is provided by firmware through the ACPI GTDT static table.
>
> The clocksource architected timer kernel driver requires a firmware
> interface to collect timer configuration and configure its driver;
> this infrastructure is present for device tree systems but it is
> missing on systems booting with ACPI.
>
> Implement the kernel infrastructure required to parse the static
> ACPI GTDT table so that the architected timer clocksource driver can
> make use of it on systems booting with ACPI, therefore enabling
> the corresponding timers configuration."

Thanks , I  have used it in my v9 patchset

>
>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> ---
>>  drivers/acpi/arm64/acpi_gtdt.c       | 72 ++++++++++++++++++++++++++++++++++++
>>  include/clocksource/arm_arch_timer.h | 15 ++++++++
>>  include/linux/acpi.h                 |  1 +
>>  3 files changed, 88 insertions(+)
>>
>> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
>> index e1cfc9e..b48e443 100644
>> --- a/drivers/acpi/arm64/acpi_gtdt.c
>> +++ b/drivers/acpi/arm64/acpi_gtdt.c
>> @@ -150,3 +150,75 @@ int __init acpi_gtdt_init(struct acpi_table_header *table)
>>
>>       return gtdt->platform_timer_count;
>>  }
>> +
>> +static int __init gtdt_parse_gt_block(void *platform_timer,
>> +                                   struct gt_block_data *data)
>> +{
>
> Nit: you can directly pass a struct acpi_gtdt_timer_block* pointer.

good idea, :-)
>
>> +     struct acpi_gtdt_timer_block *block = platform_timer;
>> +     struct acpi_gtdt_timer_entry *frame;
>> +     int i;
>> +
>> +     if (!block || !data)
>> +             return -EINVAL;
>> +
>> +     if (!block->block_address || !block->timer_count)
>> +             goto error;
>
> Here we jump to print an error and bail out. The only reason
> why we need a goto is to print a common error message and that's
> exactly what we do _not_ need, if there is a FW error we want
> to understand which one is that, otherwise the information you
> are printing is useless for debugging (provided we can make use
> of this info, which is questionable anyway).

yes, I have fixed in my v9

>
>> +     data->cntctlbase_phy = (phys_addr_t)block->block_address;
>> +     data->timer_count = block->timer_count;
>> +
>> +     frame = (void *)block + block->timer_offset;
>> +     if (frame + block->timer_count != (void *)block + block->header.length)
>> +             goto error;
>
> See above.
>
>> +     /*
>> +      * Get the GT timer Frame data for every GT Block Timer
>> +      */
>> +     for (i = 0; i < block->timer_count; i++) {
>> +             frame += i;
>
> This is wrong, if you have multiple frames, pointers would add up and
> that's not correct.

Great thanks for pointing it out, this is a bug, I have fixed it in my v9.

Thanks for your help

>
>> +             if (!frame->base_address || !frame->timer_interrupt)
>> +                     goto error;
>
> See above.
>
>> +             data->timer[i].frame_nr = frame->frame_number;
>> +             data->timer[i].cntbase_phy = frame->base_address;
>> +             data->timer[i].irq =
>> +                     map_generic_timer_interrupt(frame->timer_interrupt,
>> +                                                 frame->timer_flags);
>
> AFAIK map_generic_timer_interrupt() may fail, you should cater for that.
>
>> +             if (frame->virtual_timer_interrupt)
>> +                     data->timer[i].virt_irq =
>> +                             map_generic_timer_interrupt(
>> +                                     frame->virtual_timer_interrupt,
>> +                                     frame->virtual_timer_flags);
>
> Ditto.
>
>> +     }
>> +     return 0;
>> +
>> +error:
>> +     pr_err(FW_BUG "invalid GT Block data.\n");
>> +     return -EINVAL;
>
> See above.
>
>> +}
>> +
>> +/*
>> + * Get the GT block info for memory-mapped timer from GTDT table.
>> + * Please make sure we have called acpi_gtdt_init, because it helps to
>> + * init the global variables.
>
> I already commented on this. I think the second part of this comment
> is useless (it is a function with one caller, make sure you respect
> the calling sequence and be done with this).

I have deleted the second part  in my v9 , thanks :-)

>
> Thanks,
> Lorenzo
>
>> + */
>> +int __init gtdt_arch_timer_mem_init(struct gt_block_data *data)
>> +{
>> +     void *platform_timer;
>> +     int index = 0;
>> +     int ret;
>> +
>> +     for_each_platform_timer(platform_timer) {
>> +             if (!is_timer_block(platform_timer))
>> +                     continue;
>> +             ret = gtdt_parse_gt_block(platform_timer, data + index);
>> +             if (ret)
>> +                     return ret;
>> +             index++;
>> +     }
>> +
>> +     if (index)
>> +             pr_info("found %d memory-mapped timer block(s).\n", index);
>> +
>> +     return index;
>> +}
>> diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
>> index 16dcd10..ece6b3b 100644
>> --- a/include/clocksource/arm_arch_timer.h
>> +++ b/include/clocksource/arm_arch_timer.h
>> @@ -56,6 +56,8 @@ enum spi_nr {
>>  #define ARCH_TIMER_MEM_PHYS_ACCESS   2
>>  #define ARCH_TIMER_MEM_VIRT_ACCESS   3
>>
>> +#define ARCH_TIMER_MEM_MAX_FRAME     8
>> +
>>  #define ARCH_TIMER_USR_PCT_ACCESS_EN (1 << 0) /* physical counter */
>>  #define ARCH_TIMER_USR_VCT_ACCESS_EN (1 << 1) /* virtual counter */
>>  #define ARCH_TIMER_VIRT_EVT_EN               (1 << 2)
>> @@ -71,6 +73,19 @@ struct arch_timer_kvm_info {
>>       int virtual_irq;
>>  };
>>
>> +struct gt_timer_data {
>> +     int frame_nr;
>> +     phys_addr_t cntbase_phy;
>> +     int irq;
>> +     int virt_irq;
>> +};
>> +
>> +struct gt_block_data {
>> +     phys_addr_t cntctlbase_phy;
>> +     int timer_count;
>> +     struct gt_timer_data timer[ARCH_TIMER_MEM_MAX_FRAME];
>> +};
>> +
>>  #ifdef CONFIG_ARM_ARCH_TIMER
>>
>>  extern u32 arch_timer_get_rate(void);
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index fb8b689..24b1750 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -536,6 +536,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
>>  int acpi_gtdt_init(struct acpi_table_header *table);
>>  int acpi_gtdt_map_ppi(int type);
>>  bool acpi_gtdt_c3stop(void);
>> +int gtdt_arch_timer_mem_init(struct gt_block_data *data);
>>  #endif
>>
>>  #else        /* !CONFIG_ACPI */
>> --
>> 2.5.5
>>



-- 
Best regards,

Fu Wei
Software Engineer
Red Hat

Re: [PATCH v8 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT

[Russell King - ARM Linux]

On Mon, Jul 25, 2016 at 11:50:19PM +0800, Fu Wei wrote:
> Hi Will,
> 
> On 25 July 2016 at 17:02, Will Deacon <will.deacon@arm.com> wrote:
> > On Wed, Jul 20, 2016 at 02:17:59AM +0800, fu.wei@linaro.org wrote:
> >> From: Fu Wei <fu.wei@linaro.org>
> >>
> >> This patch simplify arch_counter_get_cntvct_mem function by
> >> using readq to get 64-bit CNTVCT value instead of readl_relaxed.
> >>
> >> Signed-off-by: Fu Wei <fu.wei@linaro.org>
> >> ---
> >>  drivers/clocksource/arm_arch_timer.c | 10 +---------
> >>  1 file changed, 1 insertion(+), 9 deletions(-)
> >>
> >> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
> >> index e6fd42d..483d2f9 100644
> >> --- a/drivers/clocksource/arm_arch_timer.c
> >> +++ b/drivers/clocksource/arm_arch_timer.c
> >> @@ -418,15 +418,7 @@ u32 arch_timer_get_rate(void)
> >>
> >>  static u64 arch_counter_get_cntvct_mem(void)
> >>  {
> >> -     u32 vct_lo, vct_hi, tmp_hi;
> >> -
> >> -     do {
> >> -             vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
> >> -             vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
> >> -             tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
> >> -     } while (vct_hi != tmp_hi);
> >> -
> >> -     return ((u64) vct_hi << 32) | vct_lo;
> >> +     return readq(arch_counter_base + CNTVCT_LO);
> >
> 
> Sorry, right after posting v9, I got your comment,
> 
> > What's the benefit of doing this? If you use readq here, how can we
> 
> benefit:
> 1. simplify the code
> 2. from arch/arm64/include/asm/io.h, I guess readq is more efficient

And the harm is that it breaks the build on ARM, because ARM doesn't
provide readq (as it can't, as not all CPUs on ARM support 64-bit
reads) and it's not appropriate for architecture code to emulate it.
Consider carefully why the original code has that loop present -
only a device driver hows how to read a 64-bit register safely using
two 32-bit reads.  Such a loop may not be appropriate for some other
device.

So... as the 0-day builder detected a failure on ARM with this, NAK.

If you want to make this conditional on readq() being present, that'd
be acceptable, but you must support the case where readq() is not
provided.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.