[PATCH 00/10] [RFC] Sphinxify and coalesce development-tool documents

[PATCH 00/10] [RFC] Sphinxify and coalesce development-tool documents

[Jonathan Corbet]

This series of patches collects a number of documents related to kernel
development tools, converts them to the Sphinx format, and puts them
together into the dev-tools directory.  The resulting formatted
documentation can be seen at:

	http://static.lwn.net/kerneldoc/dev-tools/tools.html

I've not made any textual changes, so this is far from having created a
truly coherent document, but it is a step in the right direction and shows
the sort of change I have in mind for the documentation directory in
general.

FWIW, the sphinx conversion was trivially easy - these documents were
nearly in reStructuredText already!

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Jani Nikula <jani.nikula@intel.com>

Jonathan Corbet (10):
  docs: create a new dev-tools directory
  docs: sphinxify coccinelle.txt and add it to dev-tools
  docs: sphinxify sparse.txt and move to dev-tools
  docs: sphinxify kcov.txt and move to dev-tools
  docs: sphinixfy gcov.txt and move to dev-tools
  docs: sphinxify kasan.txt and move to dev-tools
  docs: sphinxify ubsan.txt and move it to dev-tools
  docs: sphinxify kmemleak.txt and move it to dev-tools
  docs: sphinxify kmemcheck.txt and move to dev-tools
  docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools

 .../{coccinelle.txt => dev-tools/coccinelle.rst}   | 359 +++++-----
 Documentation/dev-tools/gcov.rst                   | 256 +++++++
 .../gdb-kernel-debugging.rst}                      |  77 ++-
 Documentation/dev-tools/kasan.rst                  | 173 +++++
 Documentation/dev-tools/kcov.rst                   | 111 +++
 Documentation/dev-tools/kmemcheck.rst              | 733 ++++++++++++++++++++
 .../{kmemleak.txt => dev-tools/kmemleak.rst}       |  93 +--
 Documentation/{sparse.txt => dev-tools/sparse.rst} |  61 +-
 Documentation/dev-tools/tools.rst                  |  25 +
 Documentation/{ubsan.txt => dev-tools/ubsan.rst}   |  42 +-
 Documentation/gcov.txt                             | 257 -------
 Documentation/index.rst                            |   1 +
 Documentation/kasan.txt                            | 171 -----
 Documentation/kcov.txt                             | 111 ---
 Documentation/kmemcheck.txt                        | 754 ---------------------
 MAINTAINERS                                        |  10 +-
 16 files changed, 1647 insertions(+), 1587 deletions(-)
 rename Documentation/{coccinelle.txt => dev-tools/coccinelle.rst} (56%)
 create mode 100644 Documentation/dev-tools/gcov.rst
 rename Documentation/{gdb-kernel-debugging.txt => dev-tools/gdb-kernel-debugging.rst} (73%)
 create mode 100644 Documentation/dev-tools/kasan.rst
 create mode 100644 Documentation/dev-tools/kcov.rst
 create mode 100644 Documentation/dev-tools/kmemcheck.rst
 rename Documentation/{kmemleak.txt => dev-tools/kmemleak.rst} (73%)
 rename Documentation/{sparse.txt => dev-tools/sparse.rst} (61%)
 create mode 100644 Documentation/dev-tools/tools.rst
 rename Documentation/{ubsan.txt => dev-tools/ubsan.rst} (78%)
 delete mode 100644 Documentation/gcov.txt
 delete mode 100644 Documentation/kasan.txt
 delete mode 100644 Documentation/kcov.txt
 delete mode 100644 Documentation/kmemcheck.txt

-- 
2.9.2

[PATCH 01/10] docs: create a new dev-tools directory

[Jonathan Corbet]

This directory will be a collecting point for documentation oriented around
development tools.  As a step toward ordering Documentation/ it's a small
one, but we have to start somewhere...

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/tools.rst | 16 ++++++++++++++++
 Documentation/index.rst           |  1 +
 2 files changed, 17 insertions(+)
 create mode 100644 Documentation/dev-tools/tools.rst

diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
new file mode 100644
index 0000000..60ddb9e
--- /dev/null
+++ b/Documentation/dev-tools/tools.rst
@@ -0,0 +1,16 @@
+================================
+Development tools for the kernel
+================================
+
+This document is a collection of documents about development tools that can
+be used to work on the kernel.  For now, the documents have been pulled
+together without any significant effot to integrate them into a coherent
+whole; patches welcome!
+
+.. class:: toc-title
+
+	   Table of contents
+
+.. toctree::
+   :maxdepth: 2
+
diff --git a/Documentation/index.rst b/Documentation/index.rst
index e0fc729..643fb32 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -14,6 +14,7 @@ Contents:
    :maxdepth: 2
 
    kernel-documentation
+   dev-tools/tools
    media/media_uapi
    media/media_kapi
    media/dvb-drivers/index
-- 
2.9.2

[PATCH 02/10] docs: sphinxify coccinelle.txt and add it to dev-tools

[Jonathan Corbet]

No textual changes have been made, but the formatting has obviously been
tweaked.

Cc: Michal Marek <mmarek@suse.com>
Cc: Gilles Muller <Gilles.Muller@lip6.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 .../{coccinelle.txt => dev-tools/coccinelle.rst}   | 359 +++++++++++----------
 Documentation/dev-tools/tools.rst                  |   1 +
 MAINTAINERS                                        |   2 +-
 3 files changed, 192 insertions(+), 170 deletions(-)
 rename Documentation/{coccinelle.txt => dev-tools/coccinelle.rst} (56%)

diff --git a/Documentation/coccinelle.txt b/Documentation/dev-tools/coccinelle.rst
similarity index 56%
rename from Documentation/coccinelle.txt
rename to Documentation/dev-tools/coccinelle.rst
index 01fb1da..4a64b4c 100644
--- a/Documentation/coccinelle.txt
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -1,10 +1,18 @@
-Copyright 2010 Nicolas Palix <npalix@diku.dk>
-Copyright 2010 Julia Lawall <julia@diku.dk>
-Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
+.. Copyright 2010 Nicolas Palix <npalix@diku.dk>
+.. Copyright 2010 Julia Lawall <julia@diku.dk>
+.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
 
+.. highlight:: none
 
- Getting Coccinelle
-~~~~~~~~~~~~~~~~~~~~
+Coccinelle
+==========
+
+Coccinelle is a tool for pattern matching and text transformation that has
+many uses in kernel development, including the application of complex,
+tree-wide patches and detection of problematic programming patterns.
+
+Getting Coccinelle
+-------------------
 
 The semantic patches included in the kernel use features and options
 which are provided by Coccinelle version 1.0.0-rc11 and above.
@@ -22,24 +30,23 @@ of many distributions, e.g. :
  - NetBSD
  - FreeBSD
 
-
 You can get the latest version released from the Coccinelle homepage at
 http://coccinelle.lip6.fr/
 
 Information and tips about Coccinelle are also provided on the wiki
 pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
 
-Once you have it, run the following command:
+Once you have it, run the following command::
 
      	./configure
         make
 
-as a regular user, and install it with
+as a regular user, and install it with::
 
         sudo make install
 
- Supplemental documentation
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Supplemental documentation
+---------------------------
 
 For supplemental documentation refer to the wiki:
 
@@ -47,49 +54,52 @@ https://bottest.wiki.kernel.org/coccicheck
 
 The wiki documentation always refers to the linux-next version of the script.
 
- Using Coccinelle on the Linux kernel
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Using Coccinelle on the Linux kernel
+------------------------------------
 
 A Coccinelle-specific target is defined in the top level
-Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
-front-end in the 'scripts' directory.
+Makefile. This target is named ``coccicheck`` and calls the ``coccicheck``
+front-end in the ``scripts`` directory.
 
-Four basic modes are defined: patch, report, context, and org. The mode to
-use is specified by setting the MODE variable with 'MODE=<mode>'.
+Four basic modes are defined: ``patch``, ``report``, ``context``, and
+``org``. The mode to use is specified by setting the MODE variable with
+``MODE=<mode>``.
 
-'patch' proposes a fix, when possible.
+- ``patch`` proposes a fix, when possible.
 
-'report' generates a list in the following format:
+- ``report`` generates a list in the following format:
   file:line:column-column: message
 
-'context' highlights lines of interest and their context in a
-diff-like style.Lines of interest are indicated with '-'.
+- ``context`` highlights lines of interest and their context in a
+  diff-like style.Lines of interest are indicated with ``-``.
 
-'org' generates a report in the Org mode format of Emacs.
+- ``org`` generates a report in the Org mode format of Emacs.
 
 Note that not all semantic patches implement all modes. For easy use
 of Coccinelle, the default mode is "report".
 
 Two other modes provide some common combinations of these modes.
 
-'chain' tries the previous modes in the order above until one succeeds.
+- ``chain`` tries the previous modes in the order above until one succeeds.
+
+- ``rep+ctxt`` runs successively the report mode and the context mode.
+  It should be used with the C option (described later)
+  which checks the code on a file basis.
 
-'rep+ctxt' runs successively the report mode and the context mode.
-	   It should be used with the C option (described later)
-	   which checks the code on a file basis.
+Examples
+~~~~~~~~
 
-Examples:
-	To make a report for every semantic patch, run the following command:
+To make a report for every semantic patch, run the following command::
 
 		make coccicheck MODE=report
 
-	To produce patches, run:
+To produce patches, run::
 
 		make coccicheck MODE=patch
 
 
 The coccicheck target applies every semantic patch available in the
-sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
+sub-directories of ``scripts/coccinelle`` to the entire Linux kernel.
 
 For each semantic patch, a commit message is proposed.  It gives a
 description of the problem being checked by the semantic patch, and
@@ -99,15 +109,15 @@ As any static code analyzer, Coccinelle produces false
 positives. Thus, reports must be carefully checked, and patches
 reviewed.
 
-To enable verbose messages set the V= variable, for example:
+To enable verbose messages set the V= variable, for example::
 
    make coccicheck MODE=report V=1
 
- Coccinelle parallelization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Coccinelle parallelization
+---------------------------
 
 By default, coccicheck tries to run as parallel as possible. To change
-the parallelism, set the J= variable. For example, to run across 4 CPUs:
+the parallelism, set the J= variable. For example, to run across 4 CPUs::
 
    make coccicheck MODE=report J=4
 
@@ -115,44 +125,47 @@ As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
 if support for this is detected you will benefit from parmap parallelization.
 
 When parmap is enabled coccicheck will enable dynamic load balancing by using
-'--chunksize 1' argument, this ensures we keep feeding threads with work
+``--chunksize 1`` argument, this ensures we keep feeding threads with work
 one by one, so that we avoid the situation where most work gets done by only
 a few threads. With dynamic load balancing, if a thread finishes early we keep
 feeding it more work.
 
 When parmap is enabled, if an error occurs in Coccinelle, this error
-value is propagated back, the return value of the 'make coccicheck'
+value is propagated back, the return value of the ``make coccicheck``
 captures this return value.
 
- Using Coccinelle with a single semantic patch
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Using Coccinelle with a single semantic patch
+---------------------------------------------
 
 The optional make variable COCCI can be used to check a single
 semantic patch. In that case, the variable must be initialized with
 the name of the semantic patch to apply.
 
-For instance:
+For instance::
 
 	make coccicheck COCCI=<my_SP.cocci> MODE=patch
-or
+
+or::
+
 	make coccicheck COCCI=<my_SP.cocci> MODE=report
 
 
- Controlling Which Files are Processed by Coccinelle
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Controlling Which Files are Processed by Coccinelle
+---------------------------------------------------
+
 By default the entire kernel source tree is checked.
 
-To apply Coccinelle to a specific directory, M= can be used.
-For example, to check drivers/net/wireless/ one may write:
+To apply Coccinelle to a specific directory, ``M=`` can be used.
+For example, to check drivers/net/wireless/ one may write::
 
     make coccicheck M=drivers/net/wireless/
 
 To apply Coccinelle on a file basis, instead of a directory basis, the
-following command may be used:
+following command may be used::
 
     make C=1 CHECK="scripts/coccicheck"
 
-To check only newly edited code, use the value 2 for the C flag, i.e.
+To check only newly edited code, use the value 2 for the C flag, i.e.::
 
     make C=2 CHECK="scripts/coccicheck"
 
@@ -166,8 +179,8 @@ semantic patch as shown in the previous section.
 The "report" mode is the default. You can select another one with the
 MODE variable explained above.
 
- Debugging Coccinelle SmPL patches
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Debugging Coccinelle SmPL patches
+---------------------------------
 
 Using coccicheck is best as it provides in the spatch command line
 include options matching the options used when we compile the kernel.
@@ -177,8 +190,8 @@ manually run Coccinelle with debug options added.
 Alternatively you can debug running Coccinelle against SmPL patches
 by asking for stderr to be redirected to stderr, by default stderr
 is redirected to /dev/null, if you'd like to capture stderr you
-can specify the DEBUG_FILE="file.txt" option to coccicheck. For
-instance:
+can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For
+instance::
 
     rm -f cocci.err
     make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
@@ -186,7 +199,7 @@ instance:
 
 You can use SPFLAGS to add debugging flags, for instance you may want to
 add both --profile --show-trying to SPFLAGS when debugging. For instance
-you may want to use:
+you may want to use::
 
     rm -f err.log
     export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
@@ -198,24 +211,24 @@ work.
 
 DEBUG_FILE support is only supported when using coccinelle >= 1.2.
 
- .cocciconfig support
-~~~~~~~~~~~~~~~~~~~~~~
+.cocciconfig support
+--------------------
 
 Coccinelle supports reading .cocciconfig for default Coccinelle options that
 should be used every time spatch is spawned, the order of precedence for
 variables for .cocciconfig is as follows:
 
-  o Your current user's home directory is processed first
-  o Your directory from which spatch is called is processed next
-  o The directory provided with the --dir option is processed last, if used
+- Your current user's home directory is processed first
+- Your directory from which spatch is called is processed next
+- The directory provided with the --dir option is processed last, if used
 
 Since coccicheck runs through make, it naturally runs from the kernel
 proper dir, as such the second rule above would be implied for picking up a
-.cocciconfig when using 'make coccicheck'.
+.cocciconfig when using ``make coccicheck``.
 
-'make coccicheck' also supports using M= targets.If you do not supply
+``make coccicheck`` also supports using M= targets.If you do not supply
 any M= target, it is assumed you want to target the entire kernel.
-The kernel coccicheck script has:
+The kernel coccicheck script has::
 
     if [ "$KBUILD_EXTMOD" = "" ] ; then
         OPTIONS="--dir $srctree $COCCIINCLUDE"
@@ -235,12 +248,12 @@ override any of the kernel's .coccicheck's settings using SPFLAGS.
 
 We help Coccinelle when used against Linux with a set of sensible defaults
 options for Linux with our own Linux .cocciconfig. This hints to coccinelle
-git can be used for 'git grep' queries over coccigrep. A timeout of 200
+git can be used for ``git grep`` queries over coccigrep. A timeout of 200
 seconds should suffice for now.
 
 The options picked up by coccinelle when reading a .cocciconfig do not appear
 as arguments to spatch processes running on your system, to confirm what
-options will be used by Coccinelle run:
+options will be used by Coccinelle run::
 
       spatch --print-options-only
 
@@ -252,219 +265,227 @@ carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
 desired. See below section "Additional flags" for more details on how to use
 idutils.
 
- Additional flags
-~~~~~~~~~~~~~~~~~~
+Additional flags
+----------------
 
 Additional flags can be passed to spatch through the SPFLAGS
 variable. This works as Coccinelle respects the last flags
-given to it when options are in conflict.
+given to it when options are in conflict. ::
 
     make SPFLAGS=--use-glimpse coccicheck
 
 Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
 When no ID file is specified coccinelle assumes your ID database file
 is in the file .id-utils.index on the top level of the kernel, coccinelle
-carries a script scripts/idutils_index.sh which creates the database with
+carries a script scripts/idutils_index.sh which creates the database with::
 
     mkid -i C --output .id-utils.index
 
 If you have another database filename you can also just symlink with this
-name.
+name. ::
 
     make SPFLAGS=--use-idutils coccicheck
 
 Alternatively you can specify the database filename explicitly, for
-instance:
+instance::
 
     make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
 
-See spatch --help to learn more about spatch options.
+See ``spatch --help`` to learn more about spatch options.
 
-Note that the '--use-glimpse' and '--use-idutils' options
+Note that the ``--use-glimpse`` and ``--use-idutils`` options
 require external tools for indexing the code. None of them is
 thus active by default. However, by indexing the code with
 one of these tools, and according to the cocci file used,
 spatch could proceed the entire code base more quickly.
 
- SmPL patch specific options
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+SmPL patch specific options
+---------------------------
 
 SmPL patches can have their own requirements for options passed
 to Coccinelle. SmPL patch specific options can be provided by
-providing them at the top of the SmPL patch, for instance:
+providing them at the top of the SmPL patch, for instance::
 
-// Options: --no-includes --include-headers
+	// Options: --no-includes --include-headers
 
- SmPL patch Coccinelle requirements
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+SmPL patch Coccinelle requirements
+----------------------------------
 
 As Coccinelle features get added some more advanced SmPL patches
 may require newer versions of Coccinelle. If an SmPL patch requires
 at least a version of Coccinelle, this can be specified as follows,
-as an example if requiring at least Coccinelle >= 1.0.5:
+as an example if requiring at least Coccinelle >= 1.0.5::
 
-// Requires: 1.0.5
+	// Requires: 1.0.5
 
- Proposing new semantic patches
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Proposing new semantic patches
+-------------------------------
 
 New semantic patches can be proposed and submitted by kernel
 developers. For sake of clarity, they should be organized in the
-sub-directories of 'scripts/coccinelle/'.
+sub-directories of ``scripts/coccinelle/``.
 
 
- Detailed description of the 'report' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Detailed description of the ``report`` mode
+-------------------------------------------
+
+``report`` generates a list in the following format::
 
-'report' generates a list in the following format:
   file:line:column-column: message
 
-Example:
+Example
+~~~~~~~
 
-Running
+Running::
 
 	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
 
-will execute the following part of the SmPL script.
+will execute the following part of the SmPL script::
 
-<smpl>
-@r depends on !context && !patch && (org || report)@
-expression x;
-position p;
-@@
+   <smpl>
+   @r depends on !context && !patch && (org || report)@
+   expression x;
+   position p;
+   @@
 
- ERR_PTR@p(PTR_ERR(x))
+     ERR_PTR@p(PTR_ERR(x))
 
-@script:python depends on report@
-p << r.p;
-x << r.x;
-@@
+   @script:python depends on report@
+   p << r.p;
+   x << r.x;
+   @@
 
-msg="ERR_CAST can be used with %s" % (x)
-coccilib.report.print_report(p[0], msg)
-</smpl>
+   msg="ERR_CAST can be used with %s" % (x)
+   coccilib.report.print_report(p[0], msg)
+   </smpl>
 
 This SmPL excerpt generates entries on the standard output, as
-illustrated below:
+illustrated below::
 
-/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
-/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
-/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
+    /home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
+    /home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
+    /home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
 
 
- Detailed description of the 'patch' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Detailed description of the ``patch`` mode
+------------------------------------------
 
-When the 'patch' mode is available, it proposes a fix for each problem
+When the ``patch`` mode is available, it proposes a fix for each problem
 identified.
 
-Example:
+Example
+~~~~~~~
+
+Running::
 
-Running
 	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
 
-will execute the following part of the SmPL script.
+will execute the following part of the SmPL script::
 
-<smpl>
-@ depends on !context && patch && !org && !report @
-expression x;
-@@
+    <smpl>
+    @ depends on !context && patch && !org && !report @
+    expression x;
+    @@
 
-- ERR_PTR(PTR_ERR(x))
-+ ERR_CAST(x)
-</smpl>
+    - ERR_PTR(PTR_ERR(x))
+    + ERR_CAST(x)
+    </smpl>
 
 This SmPL excerpt generates patch hunks on the standard output, as
-illustrated below:
+illustrated below::
 
-diff -u -p a/crypto/ctr.c b/crypto/ctr.c
---- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
-+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
-@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
+    diff -u -p a/crypto/ctr.c b/crypto/ctr.c
+    --- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
+    +++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
+    @@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
  	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
  				  CRYPTO_ALG_TYPE_MASK);
  	if (IS_ERR(alg))
--		return ERR_PTR(PTR_ERR(alg));
-+		return ERR_CAST(alg);
- 
+    -		return ERR_PTR(PTR_ERR(alg));
+    +		return ERR_CAST(alg);
+
  	/* Block size must be >= 4 bytes. */
  	err = -EINVAL;
 
- Detailed description of the 'context' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Detailed description of the ``context`` mode
+--------------------------------------------
 
-'context' highlights lines of interest and their context
+``context`` highlights lines of interest and their context
 in a diff-like style.
 
-NOTE: The diff-like output generated is NOT an applicable patch. The
-      intent of the 'context' mode is to highlight the important lines
-      (annotated with minus, '-') and gives some surrounding context
+      **NOTE**: The diff-like output generated is NOT an applicable patch. The
+      intent of the ``context`` mode is to highlight the important lines
+      (annotated with minus, ``-``) and gives some surrounding context
       lines around. This output can be used with the diff mode of
       Emacs to review the code.
 
-Example:
+Example
+~~~~~~~
+
+Running::
 
-Running
 	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
 
-will execute the following part of the SmPL script.
+will execute the following part of the SmPL script::
 
-<smpl>
-@ depends on context && !patch && !org && !report@
-expression x;
-@@
+    <smpl>
+    @ depends on context && !patch && !org && !report@
+    expression x;
+    @@
 
-* ERR_PTR(PTR_ERR(x))
-</smpl>
+    * ERR_PTR(PTR_ERR(x))
+    </smpl>
 
 This SmPL excerpt generates diff hunks on the standard output, as
-illustrated below:
+illustrated below::
 
-diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
---- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
-+++ /tmp/nothing
-@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
+    diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
+    --- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
+    +++ /tmp/nothing
+    @@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
  	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
  				  CRYPTO_ALG_TYPE_MASK);
  	if (IS_ERR(alg))
--		return ERR_PTR(PTR_ERR(alg));
- 
+    -		return ERR_PTR(PTR_ERR(alg));
+
  	/* Block size must be >= 4 bytes. */
  	err = -EINVAL;
 
- Detailed description of the 'org' mode
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Detailed description of the ``org`` mode
+----------------------------------------
+
+``org`` generates a report in the Org mode format of Emacs.
 
-'org' generates a report in the Org mode format of Emacs.
+Example
+~~~~~~~
 
-Example:
+Running::
 
-Running
 	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
 
-will execute the following part of the SmPL script.
+will execute the following part of the SmPL script::
 
-<smpl>
-@r depends on !context && !patch && (org || report)@
-expression x;
-position p;
-@@
+    <smpl>
+    @r depends on !context && !patch && (org || report)@
+    expression x;
+    position p;
+    @@
 
- ERR_PTR@p(PTR_ERR(x))
+      ERR_PTR@p(PTR_ERR(x))
 
-@script:python depends on org@
-p << r.p;
-x << r.x;
-@@
+    @script:python depends on org@
+    p << r.p;
+    x << r.x;
+    @@
 
-msg="ERR_CAST can be used with %s" % (x)
-msg_safe=msg.replace("[","@(").replace("]",")")
-coccilib.org.print_todo(p[0], msg_safe)
-</smpl>
+    msg="ERR_CAST can be used with %s" % (x)
+    msg_safe=msg.replace("[","@(").replace("]",")")
+    coccilib.org.print_todo(p[0], msg_safe)
+    </smpl>
 
 This SmPL excerpt generates Org entries on the standard output, as
-illustrated below:
+illustrated below::
 
-* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
-* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
-* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
+    * TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
+    * TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
+    * TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 60ddb9e..ae0c58c 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -14,3 +14,4 @@ whole; patches welcome!
 .. toctree::
    :maxdepth: 2
 
+   coccinelle
diff --git a/MAINTAINERS b/MAINTAINERS
index 20bb1d0..1e5460c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3124,7 +3124,7 @@ L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
 W:	http://coccinelle.lip6.fr/
 S:	Supported
-F:	Documentation/coccinelle.txt
+F:	Documentation/dev-tools/coccinelle.rst
 F:	scripts/coccinelle/
 F:	scripts/coccicheck
 
-- 
2.9.2

[PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Jonathan Corbet]

Fold the sparse document into the development tools set; no changes to the
text itself beyond formatting.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/{sparse.txt => dev-tools/sparse.rst} | 61 +++++++++++++---------
 Documentation/dev-tools/tools.rst                  |  1 +
 2 files changed, 36 insertions(+), 26 deletions(-)
 rename Documentation/{sparse.txt => dev-tools/sparse.rst} (61%)

diff --git a/Documentation/sparse.txt b/Documentation/dev-tools/sparse.rst
similarity index 61%
rename from Documentation/sparse.txt
rename to Documentation/dev-tools/sparse.rst
index eceab13..ebb6087 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/dev-tools/sparse.rst
@@ -1,11 +1,20 @@
-Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@ucw.cz>
-Copyright 2006 Bob Copeland <me@bobcopeland.com>
+.. Copyright 2004 Linus Torvalds
+.. Copyright 2004 Pavel Machek <pavel@ucw.cz>
+.. Copyright 2006 Bob Copeland <me@bobcopeland.com>
+
+Sparse
+======
+
+Sparse is a semantic checker for C programs; it can be used to find a
+number of potential problems with kernel code.  See
+https://lwn.net/Articles/689907/ for an overview of sparse; this document
+contains some kernel-specific sparse information.
+
 
 Using sparse for typechecking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------
 
-"__bitwise" is a type attribute, so you have to do something like this:
+``__bitwise`` is a type attribute, so you have to do something like this::
 
         typedef int __bitwise pm_request_t;
 
@@ -14,19 +23,19 @@ Using sparse for typechecking
                 PM_RESUME = (__force pm_request_t) 2
         };
 
-which makes PM_SUSPEND and PM_RESUME "bitwise" integers (the "__force" is
+which makes PM_SUSPEND and PM_RESUME ``bitwise`` integers (the ``__force`` is
 there because sparse will complain about casting to/from a bitwise type,
 but in this case we really _do_ want to force the conversion). And because
-the enum values are all the same type, now "enum pm_request" will be that
+the enum values are all the same type, now ``enum pm_request`` will be that
 type too.
 
-And with gcc, all the __bitwise/__force stuff goes away, and it all ends
-up looking just like integers to gcc.
+And with gcc, all the ``__bitwise``/``__force stuff`` goes away, and it all
+ends up looking just like integers to gcc.
 
 Quite frankly, you don't need the enum there. The above all really just
-boils down to one special "int __bitwise" type.
+boils down to one special ``int __bitwise`` type.
 
-So the simpler way is to just do
+So the simpler way is to just do::
 
         typedef int __bitwise pm_request_t;
 
@@ -35,11 +44,11 @@ So the simpler way is to just do
 
 and you now have all the infrastructure needed for strict typechecking.
 
-One small note: the constant integer "0" is special. You can use a
+One small note: the constant integer ``0`` is special. You can use a
 constant zero as a bitwise integer type without sparse ever complaining.
-This is because "bitwise" (as the name implies) was designed for making
+This is because ``bitwise`` (as the name implies) was designed for making
 sure that bitwise types don't get mixed up (little-endian vs big-endian
-vs cpu-endian vs whatever), and there the constant "0" really _is_
+vs cpu-endian vs whatever), and there the constant ``0`` really _is_
 special.
 
 __bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that
@@ -50,18 +59,18 @@ __bitwise - noisy stuff; in particular, __le*/__be* are that.  We really
 don't want to drown in noise unless we'd explicitly asked for it.
 
 Using sparse for lock checking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------
 
 The following macros are undefined for gcc and defined during a sparse
 run to use the "context" tracking feature of sparse, applied to
 locking.  These annotations tell sparse when a lock is held, with
 regard to the annotated function's entry and exit.
 
-__must_hold - The specified lock is held on function entry and exit.
+``__must_hold`` - The specified lock is held on function entry and exit.
 
-__acquires - The specified lock is held on function exit, but not entry.
+``__acquires`` - The specified lock is held on function exit, but not entry.
 
-__releases - The specified lock is held on function entry, but not exit.
+``__releases`` - The specified lock is held on function entry, but not exit.
 
 If the function enters and exits without the lock held, acquiring and
 releasing the lock inside the function in a balanced way, no
@@ -69,22 +78,22 @@ annotation is needed.  The tree annotations above are for cases where
 sparse would otherwise report a context imbalance.
 
 Getting sparse
-~~~~~~~~~~~~~~
+--------------
 
 You can get latest released versions from the Sparse homepage at
 https://sparse.wiki.kernel.org/index.php/Main_Page
 
 Alternatively, you can get snapshots of the latest development version
-of sparse using git to clone..
+of sparse using git to clone::
 
         git://git.kernel.org/pub/scm/devel/sparse/sparse.git
 
-DaveJ has hourly generated tarballs of the git tree available at..
+DaveJ has hourly generated tarballs of the git tree available at::
 
         http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
 
 
-Once you have it, just do
+Once you have it, just do::
 
         make
         make install
@@ -92,16 +101,16 @@ Once you have it, just do
 as a regular user, and it will install sparse in your ~/bin directory.
 
 Using sparse
-~~~~~~~~~~~~
+------------
 
-Do a kernel make with "make C=1" to run sparse on all the C files that get
-recompiled, or use "make C=2" to run sparse on the files whether they need to
+Do a kernel make with ``make C=1`` to run sparse on all the C files that get
+recompiled, or use ``make C=2`` to run sparse on the files whether they need to
 be recompiled or not.  The latter is a fast way to check the whole tree if you
 have already built it.
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.  To perform endianness
-checks, you may define __CHECK_ENDIAN__:
+checks, you may define ``__CHECK_ENDIAN__``::
 
         make C=2 CF="-D__CHECK_ENDIAN__"
 
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index ae0c58c..d4bbda3 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -15,3 +15,4 @@ whole; patches welcome!
    :maxdepth: 2
 
    coccinelle
+   sparse
-- 
2.9.2

[PATCH 04/10] docs: sphinxify kcov.txt and move to dev-tools

[Jonathan Corbet]

Another document added to the dev-tools collection.

Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/kcov.rst  | 111 ++++++++++++++++++++++++++++++++++++++
 Documentation/dev-tools/tools.rst |   1 +
 Documentation/kcov.txt            | 111 --------------------------------------
 3 files changed, 112 insertions(+), 111 deletions(-)
 create mode 100644 Documentation/dev-tools/kcov.rst
 delete mode 100644 Documentation/kcov.txt

diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst
new file mode 100644
index 0000000..01d652a
--- /dev/null
+++ b/Documentation/dev-tools/kcov.rst
@@ -0,0 +1,111 @@
+kcov: code coverage for fuzzing
+===============================
+
+kcov exposes kernel code coverage information in a form suitable for coverage-
+guided fuzzing (randomized testing). Coverage data of a running kernel is
+exported via the "kcov" debugfs file. Coverage collection is enabled on a task
+basis, and thus it can capture precise coverage of a single system call.
+
+Note that kcov does not aim to collect as much coverage as possible. It aims
+to collect more or less stable coverage that is function of syscall inputs.
+To achieve this goal it does not collect coverage in soft/hard interrupts
+and instrumentation of some inherently non-deterministic parts of kernel is
+disbled (e.g. scheduler, locking).
+
+Usage
+-----
+
+Configure the kernel with::
+
+        CONFIG_KCOV=y
+
+CONFIG_KCOV requires gcc built on revision 231296 or later.
+Profiling data will only become accessible once debugfs has been mounted::
+
+        mount -t debugfs none /sys/kernel/debug
+
+The following program demonstrates kcov usage from within a test program::
+
+    #include <stdio.h>
+    #include <stddef.h>
+    #include <stdint.h>
+    #include <stdlib.h>
+    #include <sys/types.h>
+    #include <sys/stat.h>
+    #include <sys/ioctl.h>
+    #include <sys/mman.h>
+    #include <unistd.h>
+    #include <fcntl.h>
+
+    #define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
+    #define KCOV_ENABLE			_IO('c', 100)
+    #define KCOV_DISABLE			_IO('c', 101)
+    #define COVER_SIZE			(64<<10)
+
+    int main(int argc, char **argv)
+    {
+    	int fd;
+    	unsigned long *cover, n, i;
+
+    	/* A single fd descriptor allows coverage collection on a single
+    	 * thread.
+    	 */
+    	fd = open("/sys/kernel/debug/kcov", O_RDWR);
+    	if (fd == -1)
+    		perror("open"), exit(1);
+    	/* Setup trace mode and trace size. */
+    	if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE))
+    		perror("ioctl"), exit(1);
+    	/* Mmap buffer shared between kernel- and user-space. */
+    	cover = (unsigned long*)mmap(NULL, COVER_SIZE * sizeof(unsigned long),
+    				     PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+    	if ((void*)cover == MAP_FAILED)
+    		perror("mmap"), exit(1);
+    	/* Enable coverage collection on the current thread. */
+    	if (ioctl(fd, KCOV_ENABLE, 0))
+    		perror("ioctl"), exit(1);
+    	/* Reset coverage from the tail of the ioctl() call. */
+    	__atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED);
+    	/* That's the target syscal call. */
+    	read(-1, NULL, 0);
+    	/* Read number of PCs collected. */
+    	n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED);
+    	for (i = 0; i < n; i++)
+    		printf("0x%lx\n", cover[i + 1]);
+    	/* Disable coverage collection for the current thread. After this call
+    	 * coverage can be enabled for a different thread.
+    	 */
+    	if (ioctl(fd, KCOV_DISABLE, 0))
+    		perror("ioctl"), exit(1);
+    	/* Free resources. */
+    	if (munmap(cover, COVER_SIZE * sizeof(unsigned long)))
+    		perror("munmap"), exit(1);
+    	if (close(fd))
+    		perror("close"), exit(1);
+    	return 0;
+    }
+
+After piping through addr2line output of the program looks as follows::
+
+    SyS_read
+    fs/read_write.c:562
+    __fdget_pos
+    fs/file.c:774
+    __fget_light
+    fs/file.c:746
+    __fget_light
+    fs/file.c:750
+    __fget_light
+    fs/file.c:760
+    __fdget_pos
+    fs/file.c:784
+    SyS_read
+    fs/read_write.c:562
+
+If a program needs to collect coverage from several threads (independently),
+it needs to open /sys/kernel/debug/kcov in each thread separately.
+
+The interface is fine-grained to allow efficient forking of test processes.
+That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode,
+mmaps coverage buffer and then forks child processes in a loop. Child processes
+only need to enable coverage (disable happens automatically on thread end).
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index d4bbda3..9dcd023 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -16,3 +16,4 @@ whole; patches welcome!
 
    coccinelle
    sparse
+   kcov
diff --git a/Documentation/kcov.txt b/Documentation/kcov.txt
deleted file mode 100644
index 779ff4a..0000000
--- a/Documentation/kcov.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-kcov: code coverage for fuzzing
-===============================
-
-kcov exposes kernel code coverage information in a form suitable for coverage-
-guided fuzzing (randomized testing). Coverage data of a running kernel is
-exported via the "kcov" debugfs file. Coverage collection is enabled on a task
-basis, and thus it can capture precise coverage of a single system call.
-
-Note that kcov does not aim to collect as much coverage as possible. It aims
-to collect more or less stable coverage that is function of syscall inputs.
-To achieve this goal it does not collect coverage in soft/hard interrupts
-and instrumentation of some inherently non-deterministic parts of kernel is
-disbled (e.g. scheduler, locking).
-
-Usage:
-======
-
-Configure kernel with:
-
-        CONFIG_KCOV=y
-
-CONFIG_KCOV requires gcc built on revision 231296 or later.
-Profiling data will only become accessible once debugfs has been mounted:
-
-        mount -t debugfs none /sys/kernel/debug
-
-The following program demonstrates kcov usage from within a test program:
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <sys/mman.h>
-#include <unistd.h>
-#include <fcntl.h>
-
-#define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
-#define KCOV_ENABLE			_IO('c', 100)
-#define KCOV_DISABLE			_IO('c', 101)
-#define COVER_SIZE			(64<<10)
-
-int main(int argc, char **argv)
-{
-	int fd;
-	unsigned long *cover, n, i;
-
-	/* A single fd descriptor allows coverage collection on a single
-	 * thread.
-	 */
-	fd = open("/sys/kernel/debug/kcov", O_RDWR);
-	if (fd == -1)
-		perror("open"), exit(1);
-	/* Setup trace mode and trace size. */
-	if (ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE))
-		perror("ioctl"), exit(1);
-	/* Mmap buffer shared between kernel- and user-space. */
-	cover = (unsigned long*)mmap(NULL, COVER_SIZE * sizeof(unsigned long),
-				     PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
-	if ((void*)cover == MAP_FAILED)
-		perror("mmap"), exit(1);
-	/* Enable coverage collection on the current thread. */
-	if (ioctl(fd, KCOV_ENABLE, 0))
-		perror("ioctl"), exit(1);
-	/* Reset coverage from the tail of the ioctl() call. */
-	__atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED);
-	/* That's the target syscal call. */
-	read(-1, NULL, 0);
-	/* Read number of PCs collected. */
-	n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED);
-	for (i = 0; i < n; i++)
-		printf("0x%lx\n", cover[i + 1]);
-	/* Disable coverage collection for the current thread. After this call
-	 * coverage can be enabled for a different thread.
-	 */
-	if (ioctl(fd, KCOV_DISABLE, 0))
-		perror("ioctl"), exit(1);
-	/* Free resources. */
-	if (munmap(cover, COVER_SIZE * sizeof(unsigned long)))
-		perror("munmap"), exit(1);
-	if (close(fd))
-		perror("close"), exit(1);
-	return 0;
-}
-
-After piping through addr2line output of the program looks as follows:
-
-SyS_read
-fs/read_write.c:562
-__fdget_pos
-fs/file.c:774
-__fget_light
-fs/file.c:746
-__fget_light
-fs/file.c:750
-__fget_light
-fs/file.c:760
-__fdget_pos
-fs/file.c:784
-SyS_read
-fs/read_write.c:562
-
-If a program needs to collect coverage from several threads (independently),
-it needs to open /sys/kernel/debug/kcov in each thread separately.
-
-The interface is fine-grained to allow efficient forking of test processes.
-That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode,
-mmaps coverage buffer and then forks child processes in a loop. Child processes
-only need to enable coverage (disable happens automatically on thread end).
-- 
2.9.2

[PATCH 05/10] docs: sphinixfy gcov.txt and move to dev-tools

[Jonathan Corbet]

No textual changes beyond formatting.

Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/gcov.rst  | 256 +++++++++++++++++++++++++++++++++++++
 Documentation/dev-tools/tools.rst |   1 +
 Documentation/gcov.txt            | 257 --------------------------------------
 MAINTAINERS                       |   2 +-
 4 files changed, 258 insertions(+), 258 deletions(-)
 create mode 100644 Documentation/dev-tools/gcov.rst
 delete mode 100644 Documentation/gcov.txt

diff --git a/Documentation/dev-tools/gcov.rst b/Documentation/dev-tools/gcov.rst
new file mode 100644
index 0000000..19eedfe
--- /dev/null
+++ b/Documentation/dev-tools/gcov.rst
@@ -0,0 +1,256 @@
+Using gcov with the Linux kernel
+================================
+
+gcov profiling kernel support enables the use of GCC's coverage testing
+tool gcov_ with the Linux kernel. Coverage data of a running kernel
+is exported in gcov-compatible format via the "gcov" debugfs directory.
+To get coverage data for a specific file, change to the kernel build
+directory and use gcov with the ``-o`` option as follows (requires root)::
+
+    # cd /tmp/linux-out
+    # gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
+
+This will create source code files annotated with execution counts
+in the current directory. In addition, graphical gcov front-ends such
+as lcov_ can be used to automate the process of collecting data
+for the entire kernel and provide coverage overviews in HTML format.
+
+Possible uses:
+
+* debugging (has this line been reached at all?)
+* test improvement (how do I change my test to cover these lines?)
+* minimizing kernel configurations (do I need this option if the
+  associated code is never run?)
+
+.. _gcov: http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
+.. _lcov: http://ltp.sourceforge.net/coverage/lcov.php
+
+
+Preparation
+-----------
+
+Configure the kernel with::
+
+        CONFIG_DEBUG_FS=y
+        CONFIG_GCOV_KERNEL=y
+
+select the gcc's gcov format, default is autodetect based on gcc version::
+
+        CONFIG_GCOV_FORMAT_AUTODETECT=y
+
+and to get coverage data for the entire kernel::
+
+        CONFIG_GCOV_PROFILE_ALL=y
+
+Note that kernels compiled with profiling flags will be significantly
+larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
+on all architectures.
+
+Profiling data will only become accessible once debugfs has been
+mounted::
+
+        mount -t debugfs none /sys/kernel/debug
+
+
+Customization
+-------------
+
+To enable profiling for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+- For a single file (e.g. main.o)::
+
+	GCOV_PROFILE_main.o := y
+
+- For all files in one directory::
+
+	GCOV_PROFILE := y
+
+To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
+is specified, use::
+
+	GCOV_PROFILE_main.o := n
+
+and::
+
+	GCOV_PROFILE := n
+
+Only files which are linked to the main kernel image or are compiled as
+kernel modules are supported by this mechanism.
+
+
+Files
+-----
+
+The gcov kernel support creates the following files in debugfs:
+
+``/sys/kernel/debug/gcov``
+	Parent directory for all gcov-related files.
+
+``/sys/kernel/debug/gcov/reset``
+	Global reset file: resets all coverage data to zero when
+        written to.
+
+``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcda``
+	The actual gcov data file as understood by the gcov
+        tool. Resets file coverage data to zero when written to.
+
+``/sys/kernel/debug/gcov/path/to/compile/dir/file.gcno``
+	Symbolic link to a static data file required by the gcov
+        tool. This file is generated by gcc when compiling with
+        option ``-ftest-coverage``.
+
+
+Modules
+-------
+
+Kernel modules may contain cleanup code which is only run during
+module unload time. The gcov mechanism provides a means to collect
+coverage data for such code by keeping a copy of the data associated
+with the unloaded module. This data remains available through debugfs.
+Once the module is loaded again, the associated coverage counters are
+initialized with the data from its previous instantiation.
+
+This behavior can be deactivated by specifying the gcov_persist kernel
+parameter::
+
+        gcov_persist=0
+
+At run-time, a user can also choose to discard data for an unloaded
+module by writing to its data file or the global reset file.
+
+
+Separated build and test machines
+---------------------------------
+
+The gcov kernel profiling infrastructure is designed to work out-of-the
+box for setups where kernels are built and run on the same machine. In
+cases where the kernel runs on a separate machine, special preparations
+must be made, depending on where the gcov tool is used:
+
+a) gcov is run on the TEST machine
+
+    The gcov tool version on the test machine must be compatible with the
+    gcc version used for kernel build. Also the following files need to be
+    copied from build to test machine:
+
+    from the source tree:
+      - all C source files + headers
+
+    from the build tree:
+      - all C source files + headers
+      - all .gcda and .gcno files
+      - all links to directories
+
+    It is important to note that these files need to be placed into the
+    exact same file system location on the test machine as on the build
+    machine. If any of the path components is symbolic link, the actual
+    directory needs to be used instead (due to make's CURDIR handling).
+
+b) gcov is run on the BUILD machine
+
+    The following files need to be copied after each test case from test
+    to build machine:
+
+    from the gcov directory in sysfs:
+      - all .gcda files
+      - all links to .gcno files
+
+    These files can be copied to any location on the build machine. gcov
+    must then be called with the -o option pointing to that directory.
+
+    Example directory setup on the build machine::
+
+      /tmp/linux:    kernel source tree
+      /tmp/out:      kernel build directory as specified by make O=
+      /tmp/coverage: location of the files copied from the test machine
+
+      [user@build] cd /tmp/out
+      [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
+
+
+Troubleshooting
+---------------
+
+Problem
+    Compilation aborts during linker step.
+
+Cause
+    Profiling flags are specified for source files which are not
+    linked to the main kernel or which are linked by a custom
+    linker procedure.
+
+Solution
+    Exclude affected source files from profiling by specifying
+    ``GCOV_PROFILE := n`` or ``GCOV_PROFILE_basename.o := n`` in the
+    corresponding Makefile.
+
+Problem
+    Files copied from sysfs appear empty or incomplete.
+
+Cause
+    Due to the way seq_file works, some tools such as cp or tar
+    may not correctly copy files from sysfs.
+
+Solution
+    Use ``cat``' to read ``.gcda`` files and ``cp -d`` to copy links.
+    Alternatively use the mechanism shown in Appendix B.
+
+
+Appendix A: gather_on_build.sh
+------------------------------
+
+Sample script to gather coverage meta files on the build machine
+(see 6a)::
+
+    #!/bin/bash
+
+    KSRC=$1
+    KOBJ=$2
+    DEST=$3
+
+    if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
+      echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
+      exit 1
+    fi
+
+    KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+    KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
+
+    find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
+                     -perm /u+r,g+r | tar cfz $DEST -P -T -
+
+    if [ $? -eq 0 ] ; then
+      echo "$DEST successfully created, copy to test system and unpack with:"
+      echo "  tar xfz $DEST -P"
+    else
+      echo "Could not create file $DEST"
+    fi
+
+
+Appendix B: gather_on_test.sh
+-----------------------------
+
+Sample script to gather coverage data files on the test machine
+(see 6b)::
+
+    #!/bin/bash -e
+
+    DEST=$1
+    GCDA=/sys/kernel/debug/gcov
+
+    if [ -z "$DEST" ] ; then
+      echo "Usage: $0 <output.tar.gz>" >&2
+      exit 1
+    fi
+
+    TEMPDIR=$(mktemp -d)
+    echo Collecting data..
+    find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+    find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+    find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+    tar czf $DEST -C $TEMPDIR sys
+    rm -rf $TEMPDIR
+
+    echo "$DEST successfully created, copy to build system and unpack with:"
+    echo "  tar xfz $DEST"
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 9dcd023..404d044 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -17,3 +17,4 @@ whole; patches welcome!
    coccinelle
    sparse
    kcov
+   gcov
diff --git a/Documentation/gcov.txt b/Documentation/gcov.txt
deleted file mode 100644
index 7b72778..0000000
--- a/Documentation/gcov.txt
+++ /dev/null
@@ -1,257 +0,0 @@
-Using gcov with the Linux kernel
-================================
-
-1. Introduction
-2. Preparation
-3. Customization
-4. Files
-5. Modules
-6. Separated build and test machines
-7. Troubleshooting
-Appendix A: sample script: gather_on_build.sh
-Appendix B: sample script: gather_on_test.sh
-
-
-1. Introduction
-===============
-
-gcov profiling kernel support enables the use of GCC's coverage testing
-tool gcov [1] with the Linux kernel. Coverage data of a running kernel
-is exported in gcov-compatible format via the "gcov" debugfs directory.
-To get coverage data for a specific file, change to the kernel build
-directory and use gcov with the -o option as follows (requires root):
-
-# cd /tmp/linux-out
-# gcov -o /sys/kernel/debug/gcov/tmp/linux-out/kernel spinlock.c
-
-This will create source code files annotated with execution counts
-in the current directory. In addition, graphical gcov front-ends such
-as lcov [2] can be used to automate the process of collecting data
-for the entire kernel and provide coverage overviews in HTML format.
-
-Possible uses:
-
-* debugging (has this line been reached at all?)
-* test improvement (how do I change my test to cover these lines?)
-* minimizing kernel configurations (do I need this option if the
-  associated code is never run?)
-
---
-
-[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
-[2] http://ltp.sourceforge.net/coverage/lcov.php
-
-
-2. Preparation
-==============
-
-Configure the kernel with:
-
-        CONFIG_DEBUG_FS=y
-        CONFIG_GCOV_KERNEL=y
-
-select the gcc's gcov format, default is autodetect based on gcc version:
-
-        CONFIG_GCOV_FORMAT_AUTODETECT=y
-
-and to get coverage data for the entire kernel:
-
-        CONFIG_GCOV_PROFILE_ALL=y
-
-Note that kernels compiled with profiling flags will be significantly
-larger and run slower. Also CONFIG_GCOV_PROFILE_ALL may not be supported
-on all architectures.
-
-Profiling data will only become accessible once debugfs has been
-mounted:
-
-        mount -t debugfs none /sys/kernel/debug
-
-
-3. Customization
-================
-
-To enable profiling for specific files or directories, add a line
-similar to the following to the respective kernel Makefile:
-
-        For a single file (e.g. main.o):
-                GCOV_PROFILE_main.o := y
-
-        For all files in one directory:
-                GCOV_PROFILE := y
-
-To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
-is specified, use:
-
-                GCOV_PROFILE_main.o := n
-        and:
-                GCOV_PROFILE := n
-
-Only files which are linked to the main kernel image or are compiled as
-kernel modules are supported by this mechanism.
-
-
-4. Files
-========
-
-The gcov kernel support creates the following files in debugfs:
-
-        /sys/kernel/debug/gcov
-                Parent directory for all gcov-related files.
-
-        /sys/kernel/debug/gcov/reset
-                Global reset file: resets all coverage data to zero when
-                written to.
-
-        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcda
-                The actual gcov data file as understood by the gcov
-                tool. Resets file coverage data to zero when written to.
-
-        /sys/kernel/debug/gcov/path/to/compile/dir/file.gcno
-                Symbolic link to a static data file required by the gcov
-                tool. This file is generated by gcc when compiling with
-                option -ftest-coverage.
-
-
-5. Modules
-==========
-
-Kernel modules may contain cleanup code which is only run during
-module unload time. The gcov mechanism provides a means to collect
-coverage data for such code by keeping a copy of the data associated
-with the unloaded module. This data remains available through debugfs.
-Once the module is loaded again, the associated coverage counters are
-initialized with the data from its previous instantiation.
-
-This behavior can be deactivated by specifying the gcov_persist kernel
-parameter:
-
-        gcov_persist=0
-
-At run-time, a user can also choose to discard data for an unloaded
-module by writing to its data file or the global reset file.
-
-
-6. Separated build and test machines
-====================================
-
-The gcov kernel profiling infrastructure is designed to work out-of-the
-box for setups where kernels are built and run on the same machine. In
-cases where the kernel runs on a separate machine, special preparations
-must be made, depending on where the gcov tool is used:
-
-a) gcov is run on the TEST machine
-
-The gcov tool version on the test machine must be compatible with the
-gcc version used for kernel build. Also the following files need to be
-copied from build to test machine:
-
-from the source tree:
-  - all C source files + headers
-
-from the build tree:
-  - all C source files + headers
-  - all .gcda and .gcno files
-  - all links to directories
-
-It is important to note that these files need to be placed into the
-exact same file system location on the test machine as on the build
-machine. If any of the path components is symbolic link, the actual
-directory needs to be used instead (due to make's CURDIR handling).
-
-b) gcov is run on the BUILD machine
-
-The following files need to be copied after each test case from test
-to build machine:
-
-from the gcov directory in sysfs:
-  - all .gcda files
-  - all links to .gcno files
-
-These files can be copied to any location on the build machine. gcov
-must then be called with the -o option pointing to that directory.
-
-Example directory setup on the build machine:
-
-  /tmp/linux:    kernel source tree
-  /tmp/out:      kernel build directory as specified by make O=
-  /tmp/coverage: location of the files copied from the test machine
-
-  [user@build] cd /tmp/out
-  [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
-
-
-7. Troubleshooting
-==================
-
-Problem:  Compilation aborts during linker step.
-Cause:    Profiling flags are specified for source files which are not
-          linked to the main kernel or which are linked by a custom
-          linker procedure.
-Solution: Exclude affected source files from profiling by specifying
-          GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
-          corresponding Makefile.
-
-Problem:  Files copied from sysfs appear empty or incomplete.
-Cause:    Due to the way seq_file works, some tools such as cp or tar
-          may not correctly copy files from sysfs.
-Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
-          Alternatively use the mechanism shown in Appendix B.
-
-
-Appendix A: gather_on_build.sh
-==============================
-
-Sample script to gather coverage meta files on the build machine
-(see 6a):
-#!/bin/bash
-
-KSRC=$1
-KOBJ=$2
-DEST=$3
-
-if [ -z "$KSRC" ] || [ -z "$KOBJ" ] || [ -z "$DEST" ]; then
-  echo "Usage: $0 <ksrc directory> <kobj directory> <output.tar.gz>" >&2
-  exit 1
-fi
-
-KSRC=$(cd $KSRC; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
-KOBJ=$(cd $KOBJ; printf "all:\n\t@echo \${CURDIR}\n" | make -f -)
-
-find $KSRC $KOBJ \( -name '*.gcno' -o -name '*.[ch]' -o -type l \) -a \
-                 -perm /u+r,g+r | tar cfz $DEST -P -T -
-
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to test system and unpack with:"
-  echo "  tar xfz $DEST -P"
-else
-  echo "Could not create file $DEST"
-fi
-
-
-Appendix B: gather_on_test.sh
-=============================
-
-Sample script to gather coverage data files on the test machine
-(see 6b):
-
-#!/bin/bash -e
-
-DEST=$1
-GCDA=/sys/kernel/debug/gcov
-
-if [ -z "$DEST" ] ; then
-  echo "Usage: $0 <output.tar.gz>" >&2
-  exit 1
-fi
-
-TEMPDIR=$(mktemp -d)
-echo Collecting data..
-find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
-find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
-find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
-tar czf $DEST -C $TEMPDIR sys
-rm -rf $TEMPDIR
-
-echo "$DEST successfully created, copy to build system and unpack with:"
-echo "  tar xfz $DEST"
diff --git a/MAINTAINERS b/MAINTAINERS
index 1e5460c..bb53779 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5118,7 +5118,7 @@ GCOV BASED KERNEL PROFILING
 M:	Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
 S:	Maintained
 F:	kernel/gcov/
-F:	Documentation/gcov.txt
+F:	Documentation/dev-tools/gcov.rst
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 M:	Achim Leubner <achim_leubner@adaptec.com>
-- 
2.9.2

[PATCH 06/10] docs: sphinxify kasan.txt and move to dev-tools

[Jonathan Corbet]

No textual changes beyond formatting.

Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/kasan.rst | 173 ++++++++++++++++++++++++++++++++++++++
 Documentation/dev-tools/tools.rst |   1 +
 Documentation/kasan.txt           | 171 -------------------------------------
 MAINTAINERS                       |   2 +-
 4 files changed, 175 insertions(+), 172 deletions(-)
 create mode 100644 Documentation/dev-tools/kasan.rst
 delete mode 100644 Documentation/kasan.txt

diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
new file mode 100644
index 0000000..948d243
--- /dev/null
+++ b/Documentation/dev-tools/kasan.rst
@@ -0,0 +1,173 @@
+The Kernel Address Sanitizer (KASAN)
+====================================
+
+Overview
+--------
+
+KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
+a fast and comprehensive solution for finding use-after-free and out-of-bounds
+bugs.
+
+KASAN uses compile-time instrumentation for checking every memory access,
+therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
+required for detection of out-of-bounds accesses to stack or global variables.
+
+Currently KASAN is supported only for x86_64 architecture.
+
+Usage
+-----
+
+To enable KASAN configure kernel with::
+
+	  CONFIG_KASAN = y
+
+and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
+inline are compiler instrumentation types. The former produces smaller binary
+the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
+version 5.0 or later.
+
+KASAN works with both SLUB and SLAB memory allocators.
+For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
+
+To disable instrumentation for specific files or directories, add a line
+similar to the following to the respective kernel Makefile:
+
+- For a single file (e.g. main.o)::
+
+    KASAN_SANITIZE_main.o := n
+
+- For all files in one directory::
+
+    KASAN_SANITIZE := n
+
+Error reports
+~~~~~~~~~~~~~
+
+A typical out of bounds access report looks like this::
+
+    ==================================================================
+    BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
+    Write of size 1 by task modprobe/1689
+    =============================================================================
+    BUG kmalloc-128 (Not tainted): kasan error
+    -----------------------------------------------------------------------------
+
+    Disabling lock debugging due to kernel taint
+    INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
+     __slab_alloc+0x4b4/0x4f0
+     kmem_cache_alloc_trace+0x10b/0x190
+     kmalloc_oob_right+0x3d/0x75 [test_kasan]
+     init_module+0x9/0x47 [test_kasan]
+     do_one_initcall+0x99/0x200
+     load_module+0x2cb3/0x3b20
+     SyS_finit_module+0x76/0x80
+     system_call_fastpath+0x12/0x17
+    INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
+    INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
+
+    Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
+    Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
+    Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
+    Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
+    Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
+    CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
+     ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
+     ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
+     ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
+    Call Trace:
+     [<ffffffff81cc68ae>] dump_stack+0x46/0x58
+     [<ffffffff811fd848>] print_trailer+0xf8/0x160
+     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+     [<ffffffff811ff0f5>] object_err+0x35/0x40
+     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
+     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+     [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
+     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
+     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
+     [<ffffffff8120a995>] __asan_store1+0x75/0xb0
+     [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
+     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
+     [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
+     [<ffffffff810002d9>] do_one_initcall+0x99/0x200
+     [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
+     [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
+     [<ffffffff8110fd70>] ? m_show+0x240/0x240
+     [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
+     [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
+    Memory state around the buggy address:
+     ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
+     ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
+    >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
+                                                 ^
+     ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
+     ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
+     ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+     ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
+    ==================================================================
+
+The header of the report discribe what kind of bug happened and what kind of
+access caused it. It's followed by the description of the accessed slub object
+(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
+the description of the accessed memory page.
+
+In the last section the report shows memory state around the accessed address.
+Reading this part requires some understanding of how KASAN works.
+
+The state of each 8 aligned bytes of memory is encoded in one shadow byte.
+Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
+We use the following encoding for each shadow byte: 0 means that all 8 bytes
+of the corresponding memory region are accessible; number N (1 <= N <= 7) means
+that the first N bytes are accessible, and other (8 - N) bytes are not;
+any negative value indicates that the entire 8-byte word is inaccessible.
+We use different negative values to distinguish between different kinds of
+inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
+
+In the report above the arrows point to the shadow byte 03, which means that
+the accessed address is partially accessible.
+
+
+Implementation details
+----------------------
+
+From a high level, our approach to memory error detection is similar to that
+of kmemcheck: use shadow memory to record whether each byte of memory is safe
+to access, and use compile-time instrumentation to check shadow memory on each
+memory access.
+
+AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
+(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
+offset to translate a memory address to its corresponding shadow address.
+
+Here is the function which translates an address to its corresponding shadow
+address::
+
+    static inline void *kasan_mem_to_shadow(const void *addr)
+    {
+	return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
+		+ KASAN_SHADOW_OFFSET;
+    }
+
+where ``KASAN_SHADOW_SCALE_SHIFT = 3``.
+
+Compile-time instrumentation used for checking memory accesses. Compiler inserts
+function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
+access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
+valid or not by checking corresponding shadow memory.
+
+GCC 5.0 has possibility to perform inline instrumentation. Instead of making
+function calls GCC directly inserts the code to check the shadow memory.
+This option significantly enlarges kernel but it gives x1.1-x2 performance
+boost over outline instrumented kernel.
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 404d044..0500e65 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -18,3 +18,4 @@ whole; patches welcome!
    sparse
    kcov
    gcov
+   kasan
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
deleted file mode 100644
index 7dd95b3..0000000
--- a/Documentation/kasan.txt
+++ /dev/null
@@ -1,171 +0,0 @@
-KernelAddressSanitizer (KASAN)
-==============================
-
-0. Overview
-===========
-
-KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
-a fast and comprehensive solution for finding use-after-free and out-of-bounds
-bugs.
-
-KASAN uses compile-time instrumentation for checking every memory access,
-therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
-required for detection of out-of-bounds accesses to stack or global variables.
-
-Currently KASAN is supported only for x86_64 architecture.
-
-1. Usage
-========
-
-To enable KASAN configure kernel with:
-
-	  CONFIG_KASAN = y
-
-and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
-inline are compiler instrumentation types. The former produces smaller binary
-the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
-version 5.0 or later.
-
-KASAN works with both SLUB and SLAB memory allocators.
-For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
-
-To disable instrumentation for specific files or directories, add a line
-similar to the following to the respective kernel Makefile:
-
-        For a single file (e.g. main.o):
-                KASAN_SANITIZE_main.o := n
-
-        For all files in one directory:
-                KASAN_SANITIZE := n
-
-1.1 Error reports
-=================
-
-A typical out of bounds access report looks like this:
-
-==================================================================
-BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
-Write of size 1 by task modprobe/1689
-=============================================================================
-BUG kmalloc-128 (Not tainted): kasan error
------------------------------------------------------------------------------
-
-Disabling lock debugging due to kernel taint
-INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
- __slab_alloc+0x4b4/0x4f0
- kmem_cache_alloc_trace+0x10b/0x190
- kmalloc_oob_right+0x3d/0x75 [test_kasan]
- init_module+0x9/0x47 [test_kasan]
- do_one_initcall+0x99/0x200
- load_module+0x2cb3/0x3b20
- SyS_finit_module+0x76/0x80
- system_call_fastpath+0x12/0x17
-INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
-INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
-
-Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
-Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
-Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
-Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
-Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
-CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
-Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
- ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
- ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
- ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
-Call Trace:
- [<ffffffff81cc68ae>] dump_stack+0x46/0x58
- [<ffffffff811fd848>] print_trailer+0xf8/0x160
- [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
- [<ffffffff811ff0f5>] object_err+0x35/0x40
- [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
- [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
- [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
- [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
- [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
- [<ffffffff8120a995>] __asan_store1+0x75/0xb0
- [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
- [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
- [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
- [<ffffffff810002d9>] do_one_initcall+0x99/0x200
- [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
- [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
- [<ffffffff8110fd70>] ? m_show+0x240/0x240
- [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
- [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
-Memory state around the buggy address:
- ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
- ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
->ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
-                                                 ^
- ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
- ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
- ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
-==================================================================
-
-The header of the report discribe what kind of bug happened and what kind of
-access caused it. It's followed by the description of the accessed slub object
-(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
-the description of the accessed memory page.
-
-In the last section the report shows memory state around the accessed address.
-Reading this part requires some understanding of how KASAN works.
-
-The state of each 8 aligned bytes of memory is encoded in one shadow byte.
-Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
-We use the following encoding for each shadow byte: 0 means that all 8 bytes
-of the corresponding memory region are accessible; number N (1 <= N <= 7) means
-that the first N bytes are accessible, and other (8 - N) bytes are not;
-any negative value indicates that the entire 8-byte word is inaccessible.
-We use different negative values to distinguish between different kinds of
-inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
-
-In the report above the arrows point to the shadow byte 03, which means that
-the accessed address is partially accessible.
-
-
-2. Implementation details
-=========================
-
-From a high level, our approach to memory error detection is similar to that
-of kmemcheck: use shadow memory to record whether each byte of memory is safe
-to access, and use compile-time instrumentation to check shadow memory on each
-memory access.
-
-AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
-(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
-offset to translate a memory address to its corresponding shadow address.
-
-Here is the function which translates an address to its corresponding shadow
-address:
-
-static inline void *kasan_mem_to_shadow(const void *addr)
-{
-	return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
-		+ KASAN_SHADOW_OFFSET;
-}
-
-where KASAN_SHADOW_SCALE_SHIFT = 3.
-
-Compile-time instrumentation used for checking memory accesses. Compiler inserts
-function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
-access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
-valid or not by checking corresponding shadow memory.
-
-GCC 5.0 has possibility to perform inline instrumentation. Instead of making
-function calls GCC directly inserts the code to check the shadow memory.
-This option significantly enlarges kernel but it gives x1.1-x2 performance
-boost over outline instrumented kernel.
diff --git a/MAINTAINERS b/MAINTAINERS
index bb53779..2ffd7ed 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6587,7 +6587,7 @@ L:	kasan-dev@googlegroups.com
 S:	Maintained
 F:	arch/*/include/asm/kasan.h
 F:	arch/*/mm/kasan_init*
-F:	Documentation/kasan.txt
+F:	Documentation/dev-tools/kasan.rst
 F:	include/linux/kasan*.h
 F:	lib/test_kasan.c
 F:	mm/kasan/
-- 
2.9.2

[PATCH 07/10] docs: sphinxify ubsan.txt and move it to dev-tools

[Jonathan Corbet]

Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/tools.rst                |  1 +
 Documentation/{ubsan.txt => dev-tools/ubsan.rst} | 42 +++++++++++++-----------
 2 files changed, 24 insertions(+), 19 deletions(-)
 rename Documentation/{ubsan.txt => dev-tools/ubsan.rst} (78%)

diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 0500e65..2d11297 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -19,3 +19,4 @@ whole; patches welcome!
    kcov
    gcov
    kasan
+   ubsan
diff --git a/Documentation/ubsan.txt b/Documentation/dev-tools/ubsan.rst
similarity index 78%
rename from Documentation/ubsan.txt
rename to Documentation/dev-tools/ubsan.rst
index f58215e..655e6b6 100644
--- a/Documentation/ubsan.txt
+++ b/Documentation/dev-tools/ubsan.rst
@@ -1,7 +1,5 @@
-Undefined Behavior Sanitizer - UBSAN
-
-Overview
---------
+The Undefined Behavior Sanitizer - UBSAN
+========================================
 
 UBSAN is a runtime undefined behaviour checker.
 
@@ -10,11 +8,13 @@ Compiler inserts code that perform certain kinds of checks before operations
 that may cause UB. If check fails (i.e. UB detected) __ubsan_handle_*
 function called to print error message.
 
-GCC has that feature since 4.9.x [1] (see -fsanitize=undefined option and
-its suboptions). GCC 5.x has more checkers implemented [2].
+GCC has that feature since 4.9.x [1_] (see ``-fsanitize=undefined`` option and
+its suboptions). GCC 5.x has more checkers implemented [2_].
 
 Report example
----------------
+--------------
+
+::
 
 	 ================================================================================
 	 UBSAN: Undefined behaviour in ../include/linux/bitops.h:110:33
@@ -47,29 +47,33 @@ Report example
 Usage
 -----
 
-To enable UBSAN configure kernel with:
+To enable UBSAN configure kernel with::
 
 	CONFIG_UBSAN=y
 
-and to check the entire kernel:
+and to check the entire kernel::
 
         CONFIG_UBSAN_SANITIZE_ALL=y
 
 To enable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 
-        For a single file (e.g. main.o):
-                UBSAN_SANITIZE_main.o := y
+- For a single file (e.g. main.o)::
+
+    UBSAN_SANITIZE_main.o := y
 
-        For all files in one directory:
-                UBSAN_SANITIZE := y
+- For all files in one directory::
+
+    UBSAN_SANITIZE := y
 
 To exclude files from being instrumented even if
-CONFIG_UBSAN_SANITIZE_ALL=y, use:
+``CONFIG_UBSAN_SANITIZE_ALL=y``, use::
+
+  UBSAN_SANITIZE_main.o := n
+
+and::
 
-                UBSAN_SANITIZE_main.o := n
-        and:
-                UBSAN_SANITIZE := n
+  UBSAN_SANITIZE := n
 
 Detection of unaligned accesses controlled through the separate option -
 CONFIG_UBSAN_ALIGNMENT. It's off by default on architectures that support
@@ -80,5 +84,5 @@ reports.
 References
 ----------
 
-[1] - https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
-[2] - https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
+.. _1: https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Debugging-Options.html
+.. _2: https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html
-- 
2.9.2

[PATCH 08/10] docs: sphinxify kmemleak.txt and move it to dev-tools

[Jonathan Corbet]

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 .../{kmemleak.txt => dev-tools/kmemleak.rst}       | 93 ++++++++++++----------
 Documentation/dev-tools/tools.rst                  |  1 +
 MAINTAINERS                                        |  2 +-
 3 files changed, 52 insertions(+), 44 deletions(-)
 rename Documentation/{kmemleak.txt => dev-tools/kmemleak.rst} (73%)

diff --git a/Documentation/kmemleak.txt b/Documentation/dev-tools/kmemleak.rst
similarity index 73%
rename from Documentation/kmemleak.txt
rename to Documentation/dev-tools/kmemleak.rst
index 18e24ab..1788722 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/dev-tools/kmemleak.rst
@@ -1,15 +1,12 @@
 Kernel Memory Leak Detector
 ===========================
 
-Introduction
-------------
-
 Kmemleak provides a way of detecting possible kernel memory leaks in a
 way similar to a tracing garbage collector
 (https://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
 with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
-Valgrind tool (memcheck --leak-check) to detect the memory leaks in
+Valgrind tool (``memcheck --leak-check``) to detect the memory leaks in
 user-space applications.
 Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze, ppc, mips, s390, metag and tile.
 
@@ -19,20 +16,20 @@ Usage
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
 thread scans the memory every 10 minutes (by default) and prints the
 number of new unreferenced objects found. To display the details of all
-the possible memory leaks:
+the possible memory leaks::
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
-To trigger an intermediate memory scan:
+To trigger an intermediate memory scan::
 
   # echo scan > /sys/kernel/debug/kmemleak
 
-To clear the list of all current possible memory leaks:
+To clear the list of all current possible memory leaks::
 
   # echo clear > /sys/kernel/debug/kmemleak
 
-New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+New leaks will then come up upon reading ``/sys/kernel/debug/kmemleak``
 again.
 
 Note that the orphan objects are listed in the order they were allocated
@@ -40,22 +37,31 @@ and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
 
 Memory scanning parameters can be modified at run-time by writing to the
-/sys/kernel/debug/kmemleak file. The following parameters are supported:
-
-  off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning (default)
-  stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread (default)
-  scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds
-		  (default 600, 0 to stop the automatic scanning)
-  scan		- trigger a memory scan
-  clear		- clear list of current memory leak suspects, done by
-		  marking all current reported unreferenced objects grey,
-		  or free all kmemleak objects if kmemleak has been disabled.
-  dump=<addr>	- dump information about the object found at <addr>
-
-Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
+``/sys/kernel/debug/kmemleak`` file. The following parameters are supported:
+
+- off
+    disable kmemleak (irreversible)
+- stack=on
+    enable the task stacks scanning (default)
+- stack=off
+    disable the tasks stacks scanning
+- scan=on
+    start the automatic memory scanning thread (default)
+- scan=off
+    stop the automatic memory scanning thread
+- scan=<secs>
+    set the automatic memory scanning period in seconds
+    (default 600, 0 to stop the automatic scanning)
+- scan
+    trigger a memory scan
+- clear
+    clear list of current memory leak suspects, done by
+    marking all current reported unreferenced objects grey,
+    or free all kmemleak objects if kmemleak has been disabled.
+- dump=<addr>
+    dump information about the object found at <addr>
+
+Kmemleak can also be disabled at boot-time by passing ``kmemleak=off`` on
 the kernel command line.
 
 Memory may be allocated or freed before kmemleak is initialised and
@@ -63,13 +69,14 @@ these actions are stored in an early log buffer. The size of this buffer
 is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
 
 If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
-disabled by default. Passing "kmemleak=on" on the kernel command
+disabled by default. Passing ``kmemleak=on`` on the kernel command
 line enables the function. 
 
 Basic Algorithm
 ---------------
 
-The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+The memory allocations via :c:func:`kmalloc`, :c:func:`vmalloc`,
+:c:func:`kmem_cache_alloc` and
 friends are traced and the pointers, together with additional
 information like size and stack trace, are stored in a rbtree.
 The corresponding freeing function calls are tracked and the pointers
@@ -113,13 +120,13 @@ when doing development. To work around these situations you can use the
 you can find new unreferenced objects; this should help with testing
 specific sections of code.
 
-To test a critical section on demand with a clean kmemleak do:
+To test a critical section on demand with a clean kmemleak do::
 
   # echo clear > /sys/kernel/debug/kmemleak
   ... test your kernel or modules ...
   # echo scan > /sys/kernel/debug/kmemleak
 
-Then as usual to get your report with:
+Then as usual to get your report with::
 
   # cat /sys/kernel/debug/kmemleak
 
@@ -131,7 +138,7 @@ disabled by the user or due to an fatal error, internal kmemleak objects
 won't be freed when kmemleak is disabled, and those objects may occupy
 a large part of physical memory.
 
-In this situation, you may reclaim memory with:
+In this situation, you may reclaim memory with::
 
   # echo clear > /sys/kernel/debug/kmemleak
 
@@ -140,20 +147,20 @@ Kmemleak API
 
 See the include/linux/kmemleak.h header for the functions prototype.
 
-kmemleak_init		 - initialize kmemleak
-kmemleak_alloc		 - notify of a memory block allocation
-kmemleak_alloc_percpu	 - notify of a percpu memory block allocation
-kmemleak_free		 - notify of a memory block freeing
-kmemleak_free_part	 - notify of a partial memory block freeing
-kmemleak_free_percpu	 - notify of a percpu memory block freeing
-kmemleak_update_trace	 - update object allocation stack trace
-kmemleak_not_leak	 - mark an object as not a leak
-kmemleak_ignore		 - do not scan or report an object as leak
-kmemleak_scan_area	 - add scan areas inside a memory block
-kmemleak_no_scan	 - do not scan a memory block
-kmemleak_erase		 - erase an old value in a pointer variable
-kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
-kmemleak_free_recursive	 - as kmemleak_free but checks the recursiveness
+- ``kmemleak_init``		 - initialize kmemleak
+- ``kmemleak_alloc``		 - notify of a memory block allocation
+- ``kmemleak_alloc_percpu``	 - notify of a percpu memory block allocation
+- ``kmemleak_free``		 - notify of a memory block freeing
+- ``kmemleak_free_part``	 - notify of a partial memory block freeing
+- ``kmemleak_free_percpu``	 - notify of a percpu memory block freeing
+- ``kmemleak_update_trace``	 - update object allocation stack trace
+- ``kmemleak_not_leak``	 - mark an object as not a leak
+- ``kmemleak_ignore``		 - do not scan or report an object as leak
+- ``kmemleak_scan_area``	 - add scan areas inside a memory block
+- ``kmemleak_no_scan``	 - do not scan a memory block
+- ``kmemleak_erase``		 - erase an old value in a pointer variable
+- ``kmemleak_alloc_recursive`` - as kmemleak_alloc but checks the recursiveness
+- ``kmemleak_free_recursive``	 - as kmemleak_free but checks the recursiveness
 
 Dealing with false positives/negatives
 --------------------------------------
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 2d11297..3b6382a 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -20,3 +20,4 @@ whole; patches welcome!
    gcov
    kasan
    ubsan
+   kmemleak
diff --git a/MAINTAINERS b/MAINTAINERS
index 2ffd7ed..b235e0d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6812,7 +6812,7 @@ F:	mm/kmemcheck.c
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
-F:	Documentation/kmemleak.txt
+F:	Documentation/dev-tools/kmemleak.rst
 F:	include/linux/kmemleak.h
 F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
-- 
2.9.2

[PATCH 09/10] docs: sphinxify kmemcheck.txt and move to dev-tools

[Jonathan Corbet]

Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/dev-tools/kmemcheck.rst | 733 +++++++++++++++++++++++++++++++++
 Documentation/dev-tools/tools.rst     |   1 +
 Documentation/kmemcheck.txt           | 754 ----------------------------------
 MAINTAINERS                           |   2 +-
 4 files changed, 735 insertions(+), 755 deletions(-)
 create mode 100644 Documentation/dev-tools/kmemcheck.rst
 delete mode 100644 Documentation/kmemcheck.txt

diff --git a/Documentation/dev-tools/kmemcheck.rst b/Documentation/dev-tools/kmemcheck.rst
new file mode 100644
index 0000000..778f515
--- /dev/null
+++ b/Documentation/dev-tools/kmemcheck.rst
@@ -0,0 +1,733 @@
+Getting started with kmemcheck
+==============================
+
+Vegard Nossum <vegardno@ifi.uio.no>
+
+
+Introduction
+------------
+
+kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
+is a dynamic checker that detects and warns about some uses of uninitialized
+memory.
+
+Userspace programmers might be familiar with Valgrind's memcheck. The main
+difference between memcheck and kmemcheck is that memcheck works for userspace
+programs only, and kmemcheck works for the kernel only. The implementations
+are of course vastly different. Because of this, kmemcheck is not as accurate
+as memcheck, but it turns out to be good enough in practice to discover real
+programmer errors that the compiler is not able to find through static
+analysis.
+
+Enabling kmemcheck on a kernel will probably slow it down to the extent that
+the machine will not be usable for normal workloads such as e.g. an
+interactive desktop. kmemcheck will also cause the kernel to use about twice
+as much memory as normal. For this reason, kmemcheck is strictly a debugging
+feature.
+
+
+Downloading
+-----------
+
+As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
+
+
+Configuring and compiling
+-------------------------
+
+kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
+configuration variables must have specific settings in order for the kmemcheck
+menu to even appear in "menuconfig". These are:
+
+- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n``
+	This option is located under "General setup" / "Optimize for size".
+
+	Without this, gcc will use certain optimizations that usually lead to
+	false positive warnings from kmemcheck. An example of this is a 16-bit
+	field in a struct, where gcc may load 32 bits, then discard the upper
+	16 bits. kmemcheck sees only the 32-bit load, and may trigger a
+	warning for the upper 16 bits (if they're uninitialized).
+
+- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y``
+	This option is located under "General setup" / "Choose SLAB
+	allocator".
+
+- ``CONFIG_FUNCTION_TRACER=n``
+	This option is located under "Kernel hacking" / "Tracers" / "Kernel
+	Function Tracer"
+
+	When function tracing is compiled in, gcc emits a call to another
+	function at the beginning of every function. This means that when the
+	page fault handler is called, the ftrace framework will be called
+	before kmemcheck has had a chance to handle the fault. If ftrace then
+	modifies memory that was tracked by kmemcheck, the result is an
+	endless recursive page fault.
+
+- ``CONFIG_DEBUG_PAGEALLOC=n``
+	This option is located under "Kernel hacking" / "Memory Debugging"
+	/ "Debug page memory allocations".
+
+In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also
+located under "Kernel hacking". With this, you will be able to get line number
+information from the kmemcheck warnings, which is extremely valuable in
+debugging a problem. This option is not mandatory, however, because it slows
+down the compilation process and produces a much bigger kernel image.
+
+Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
+Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
+a description of the kmemcheck configuration variables:
+
+- ``CONFIG_KMEMCHECK``
+	This must be enabled in order to use kmemcheck at all...
+
+- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT``
+	This option controls the status of kmemcheck at boot-time. "Enabled"
+	will enable kmemcheck right from the start, "disabled" will boot the
+	kernel as normal (but with the kmemcheck code compiled in, so it can
+	be enabled at run-time after the kernel has booted), and "one-shot" is
+	a special mode which will turn kmemcheck off automatically after
+	detecting the first use of uninitialized memory.
+
+	If you are using kmemcheck to actively debug a problem, then you
+	probably want to choose "enabled" here.
+
+	The one-shot mode is mostly useful in automated test setups because it
+	can prevent floods of warnings and increase the chances of the machine
+	surviving in case something is really wrong. In other cases, the one-
+	shot mode could actually be counter-productive because it would turn
+	itself off at the very first error -- in the case of a false positive
+	too -- and this would come in the way of debugging the specific
+	problem you were interested in.
+
+	If you would like to use your kernel as normal, but with a chance to
+	enable kmemcheck in case of some problem, it might be a good idea to
+	choose "disabled" here. When kmemcheck is disabled, most of the run-
+	time overhead is not incurred, and the kernel will be almost as fast
+	as normal.
+
+- ``CONFIG_KMEMCHECK_QUEUE_SIZE``
+	Select the maximum number of error reports to store in an internal
+	(fixed-size) buffer. Since errors can occur virtually anywhere and in
+	any context, we need a temporary storage area which is guaranteed not
+	to generate any other page faults when accessed. The queue will be
+	emptied as soon as a tasklet may be scheduled. If the queue is full,
+	new error reports will be lost.
+
+	The default value of 64 is probably fine. If some code produces more
+	than 64 errors within an irqs-off section, then the code is likely to
+	produce many, many more, too, and these additional reports seldom give
+	any more information (the first report is usually the most valuable
+	anyway).
+
+	This number might have to be adjusted if you are not using serial
+	console or similar to capture the kernel log. If you are using the
+	"dmesg" command to save the log, then getting a lot of kmemcheck
+	warnings might overflow the kernel log itself, and the earlier reports
+	will get lost in that way instead. Try setting this to 10 or so on
+	such a setup.
+
+- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT``
+	Select the number of shadow bytes to save along with each entry of the
+	error-report queue. These bytes indicate what parts of an allocation
+	are initialized, uninitialized, etc. and will be displayed when an
+	error is detected to help the debugging of a particular problem.
+
+	The number entered here is actually the logarithm of the number of
+	bytes that will be saved. So if you pick for example 5 here, kmemcheck
+	will save 2^5 = 32 bytes.
+
+	The default value should be fine for debugging most problems. It also
+	fits nicely within 80 columns.
+
+- ``CONFIG_KMEMCHECK_PARTIAL_OK``
+	This option (when enabled) works around certain GCC optimizations that
+	produce 32-bit reads from 16-bit variables where the upper 16 bits are
+	thrown away afterwards.
+
+	The default value (enabled) is recommended. This may of course hide
+	some real errors, but disabling it would probably produce a lot of
+	false positives.
+
+- ``CONFIG_KMEMCHECK_BITOPS_OK``
+	This option silences warnings that would be generated for bit-field
+	accesses where not all the bits are initialized at the same time. This
+	may also hide some real bugs.
+
+	This option is probably obsolete, or it should be replaced with
+	the kmemcheck-/bitfield-annotations for the code in question. The
+	default value is therefore fine.
+
+Now compile the kernel as usual.
+
+
+How to use
+----------
+
+Booting
+~~~~~~~
+
+First some information about the command-line options. There is only one
+option specific to kmemcheck, and this is called "kmemcheck". It can be used
+to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT``
+option. Its possible settings are:
+
+- ``kmemcheck=0`` (disabled)
+- ``kmemcheck=1`` (enabled)
+- ``kmemcheck=2`` (one-shot mode)
+
+If SLUB debugging has been enabled in the kernel, it may take precedence over
+kmemcheck in such a way that the slab caches which are under SLUB debugging
+will not be tracked by kmemcheck. In order to ensure that this doesn't happen
+(even though it shouldn't by default), use SLUB's boot option ``slub_debug``,
+like this: ``slub_debug=-``
+
+In fact, this option may also be used for fine-grained control over SLUB vs.
+kmemcheck. For example, if the command line includes
+``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only
+for the "dentry" slab cache, and with kmemcheck tracking all the other
+caches. This is advanced usage, however, and is not generally recommended.
+
+
+Run-time enable/disable
+~~~~~~~~~~~~~~~~~~~~~~~
+
+When the kernel has booted, it is possible to enable or disable kmemcheck at
+run-time. WARNING: This feature is still experimental and may cause false
+positive warnings to appear. Therefore, try not to use this. If you find that
+it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
+will be happy to take bug reports.
+
+Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.::
+
+	$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
+
+The numbers are the same as for the ``kmemcheck=`` command-line option.
+
+
+Debugging
+~~~~~~~~~
+
+A typical report will look something like this::
+
+    WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+    80000000000000000000000000000000000000000088ffff0000000000000000
+     i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+             ^
+
+    Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
+    RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+    RSP: 0018:ffff88003cdf7d98  EFLAGS: 00210002
+    RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+    RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
+    RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
+    R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
+    R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
+    FS:  0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
+    CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
+    CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
+    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
+    DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
+     [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+     [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+     [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+     [<ffffffff8100c7b5>] int_signal+0x12/0x17
+     [<ffffffffffffffff>] 0xffffffffffffffff
+
+The single most valuable information in this report is the RIP (or EIP on 32-
+bit) value. This will help us pinpoint exactly which instruction that caused
+the warning.
+
+If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do
+is give this address to the addr2line program, like this::
+
+	$ addr2line -e vmlinux -i ffffffff8104ede8
+	arch/x86/include/asm/string_64.h:12
+	include/asm-generic/siginfo.h:287
+	kernel/signal.c:380
+	kernel/signal.c:410
+
+The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:**
+This must be the vmlinux of the kernel that produced the warning in the
+first place! If not, the line number information will almost certainly be
+wrong.
+
+The "``-i``" tells addr2line to also print the line numbers of inlined
+functions.  In this case, the flag was very important, because otherwise,
+it would only have printed the first line, which is just a call to
+``memcpy()``, which could be called from a thousand places in the kernel, and
+is therefore not very useful.  These inlined functions would not show up in
+the stack trace above, simply because the kernel doesn't load the extra
+debugging information. This technique can of course be used with ordinary
+kernel oopses as well.
+
+In this case, it's the caller of ``memcpy()`` that is interesting, and it can be
+found in ``include/asm-generic/siginfo.h``, line 287::
+
+    281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+    282 {
+    283         if (from->si_code < 0)
+    284                 memcpy(to, from, sizeof(*to));
+    285         else
+    286                 /* _sigchld is currently the largest know union member */
+    287                 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+    288 }
+
+Since this was a read (kmemcheck usually warns about reads only, though it can
+warn about writes to unallocated or freed memory as well), it was probably the
+"from" argument which contained some uninitialized bytes. Following the chain
+of calls, we move upwards to see where "from" was allocated or initialized,
+``kernel/signal.c``, line 380::
+
+    359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+    360 {
+    ...
+    367         list_for_each_entry(q, &list->list, list) {
+    368                 if (q->info.si_signo == sig) {
+    369                         if (first)
+    370                                 goto still_pending;
+    371                         first = q;
+    ...
+    377         if (first) {
+    378 still_pending:
+    379                 list_del_init(&first->list);
+    380                 copy_siginfo(info, &first->info);
+    381                 __sigqueue_free(first);
+    ...
+    392         }
+    393 }
+
+Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The
+variable ``first`` was found on a list -- passed in as the second argument to
+``collect_signal()``. We  continue our journey through the stack, to figure out
+where the item on "list" was allocated or initialized. We move to line 410::
+
+    395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
+    396                         siginfo_t *info)
+    397 {
+    ...
+    410                 collect_signal(sig, pending, info);
+    ...
+    414 }
+
+Now we need to follow the ``pending`` pointer, since that is being passed on to
+``collect_signal()`` as ``list``. At this point, we've run out of lines from the
+"addr2line" output. Not to worry, we just paste the next addresses from the
+kmemcheck stack dump, i.e.::
+
+     [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
+     [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
+     [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
+     [<ffffffff8100c7b5>] int_signal+0x12/0x17
+
+    	$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
+    		ffffffff8100b87d ffffffff8100c7b5
+    	kernel/signal.c:446
+    	kernel/signal.c:1806
+    	arch/x86/kernel/signal.c:805
+    	arch/x86/kernel/signal.c:871
+    	arch/x86/kernel/entry_64.S:694
+
+Remember that since these addresses were found on the stack and not as the
+RIP value, they actually point to the _next_ instruction (they are return
+addresses). This becomes obvious when we look at the code for line 446::
+
+    422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+    423 {
+    ...
+    431                 signr = __dequeue_signal(&tsk->signal->shared_pending,
+    432                                          mask, info);
+    433                 /*
+    434                  * itimer signal ?
+    435                  *
+    436                  * itimers are process shared and we restart periodic
+    437                  * itimers in the signal delivery path to prevent DoS
+    438                  * attacks in the high resolution timer case. This is
+    439                  * compliant with the old way of self restarting
+    440                  * itimers, as the SIGALRM is a legacy signal and only
+    441                  * queued once. Changing the restart behaviour to
+    442                  * restart the timer in the signal dequeue path is
+    443                  * reducing the timer noise on heavy loaded !highres
+    444                  * systems too.
+    445                  */
+    446                 if (unlikely(signr == SIGALRM)) {
+    ...
+    489 }
+
+So instead of looking at 446, we should be looking at 431, which is the line
+that executes just before 446. Here we see that what we are looking for is
+``&tsk->signal->shared_pending``.
+
+Our next task is now to figure out which function that puts items on this
+``shared_pending`` list. A crude, but efficient tool, is ``git grep``::
+
+	$ git grep -n 'shared_pending' kernel/
+	...
+	kernel/signal.c:828:    pending = group ? &t->signal->shared_pending : &t->pending;
+	kernel/signal.c:1339:   pending = group ? &t->signal->shared_pending : &t->pending;
+	...
+
+There were more results, but none of them were related to list operations,
+and these were the only assignments. We inspect the line numbers more closely
+and find that this is indeed where items are being added to the list::
+
+    816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+    817                         int group)
+    818 {
+    ...
+    828         pending = group ? &t->signal->shared_pending : &t->pending;
+    ...
+    851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+    852                                              (is_si_special(info) ||
+    853                                               info->si_code >= 0)));
+    854         if (q) {
+    855                 list_add_tail(&q->list, &pending->list);
+    ...
+    890 }
+
+and::
+
+    1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
+    1310 {
+    ....
+    1339         pending = group ? &t->signal->shared_pending : &t->pending;
+    1340         list_add_tail(&q->list, &pending->list);
+    ....
+    1347 }
+
+In the first case, the list element we are looking for, ``q``, is being
+returned from the function ``__sigqueue_alloc()``, which looks like an
+allocation function.  Let's take a look at it::
+
+    187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
+    188                                          int override_rlimit)
+    189 {
+    190         struct sigqueue *q = NULL;
+    191         struct user_struct *user;
+    192
+    193         /*
+    194          * We won't get problems with the target's UID changing under us
+    195          * because changing it requires RCU be used, and if t != current, the
+    196          * caller must be holding the RCU readlock (by way of a spinlock) and
+    197          * we use RCU protection here
+    198          */
+    199         user = get_uid(__task_cred(t)->user);
+    200         atomic_inc(&user->sigpending);
+    201         if (override_rlimit ||
+    202             atomic_read(&user->sigpending) <=
+    203                         t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
+    204                 q = kmem_cache_alloc(sigqueue_cachep, flags);
+    205         if (unlikely(q == NULL)) {
+    206                 atomic_dec(&user->sigpending);
+    207                 free_uid(user);
+    208         } else {
+    209                 INIT_LIST_HEAD(&q->list);
+    210                 q->flags = 0;
+    211                 q->user = user;
+    212         }
+    213
+    214         return q;
+    215 }
+
+We see that this function initializes ``q->list``, ``q->flags``, and
+``q->user``. It seems that now is the time to look at the definition of
+``struct sigqueue``, e.g.::
+
+    14 struct sigqueue {
+    15         struct list_head list;
+    16         int flags;
+    17         siginfo_t info;
+    18         struct user_struct *user;
+    19 };
+
+And, you might remember, it was a ``memcpy()`` on ``&first->info`` that
+caused the warning, so this makes perfect sense. It also seems reasonable
+to assume that it is the caller of ``__sigqueue_alloc()`` that has the
+responsibility of filling out (initializing) this member.
+
+But just which fields of the struct were uninitialized? Let's look at
+kmemcheck's report again::
+
+    WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
+    80000000000000000000000000000000000000000088ffff0000000000000000
+     i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+             ^
+
+These first two lines are the memory dump of the memory object itself, and
+the shadow bytemap, respectively. The memory object itself is in this case
+``&first->info``. Just beware that the start of this dump is NOT the start
+of the object itself! The position of the caret (^) corresponds with the
+address of the read (ffff88003e4a2024).
+
+The shadow bytemap dump legend is as follows:
+
+- i: initialized
+- u: uninitialized
+- a: unallocated (memory has been allocated by the slab layer, but has not
+  yet been handed off to anybody)
+- f: freed (memory has been allocated by the slab layer, but has been freed
+  by the previous owner)
+
+In order to figure out where (relative to the start of the object) the
+uninitialized memory was located, we have to look at the disassembly. For
+that, we'll need the RIP address again::
+
+    RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
+
+	$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
+	ffffffff8104edc8:       mov    %r8,0x8(%r8)
+	ffffffff8104edcc:       test   %r10d,%r10d
+	ffffffff8104edcf:       js     ffffffff8104ee88 <__dequeue_signal+0x168>
+	ffffffff8104edd5:       mov    %rax,%rdx
+	ffffffff8104edd8:       mov    $0xc,%ecx
+	ffffffff8104eddd:       mov    %r13,%rdi
+	ffffffff8104ede0:       mov    $0x30,%eax
+	ffffffff8104ede5:       mov    %rdx,%rsi
+	ffffffff8104ede8:       rep movsl %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edea:       test   $0x2,%al
+	ffffffff8104edec:       je     ffffffff8104edf0 <__dequeue_signal+0xd0>
+	ffffffff8104edee:       movsw  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf0:       test   $0x1,%al
+	ffffffff8104edf2:       je     ffffffff8104edf5 <__dequeue_signal+0xd5>
+	ffffffff8104edf4:       movsb  %ds:(%rsi),%es:(%rdi)
+	ffffffff8104edf5:       mov    %r8,%rdi
+	ffffffff8104edf8:       callq  ffffffff8104de60 <__sigqueue_free>
+
+As expected, it's the "``rep movsl``" instruction from the ``memcpy()``
+that causes the warning. We know about ``REP MOVSL`` that it uses the register
+``RCX`` to count the number of remaining iterations. By taking a look at the
+register dump again (from the kmemcheck report), we can figure out how many
+bytes were left to copy::
+
+    RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
+
+By looking at the disassembly, we also see that ``%ecx`` is being loaded
+with the value ``$0xc`` just before (ffffffff8104edd8), so we are very
+lucky. Keep in mind that this is the number of iterations, not bytes. And
+since this is a "long" operation, we need to multiply by 4 to get the
+number of bytes. So this means that the uninitialized value was encountered
+at 4 * (0xc - 0x9) = 12 bytes from the start of the object.
+
+We can now try to figure out which field of the "``struct siginfo``" that
+was not initialized. This is the beginning of the struct::
+
+    40 typedef struct siginfo {
+    41         int si_signo;
+    42         int si_errno;
+    43         int si_code;
+    44
+    45         union {
+    ..
+    92         } _sifields;
+    93 } siginfo_t;
+
+On 64-bit, the int is 4 bytes long, so it must the union member that has
+not been initialized. We can verify this using gdb::
+
+	$ gdb vmlinux
+	...
+	(gdb) p &((struct siginfo *) 0)->_sifields
+	$1 = (union {...} *) 0x10
+
+Actually, it seems that the union member is located at offset 0x10 -- which
+means that gcc has inserted 4 bytes of padding between the members ``si_code``
+and ``_sifields``. We can now get a fuller picture of the memory dump::
+
+	         _----------------------------=> si_code
+	        /        _--------------------=> (padding)
+	       |        /        _------------=> _sifields(._kill._pid)
+	       |       |        /        _----=> _sifields(._kill._uid)
+	       |       |       |        /
+	-------|-------|-------|-------|
+	80000000000000000000000000000000000000000088ffff0000000000000000
+	 i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
+
+This allows us to realize another important fact: ``si_code`` contains the
+value 0x80. Remember that x86 is little endian, so the first 4 bytes
+"80000000" are really the number 0x00000080. With a bit of research, we
+find that this is actually the constant ``SI_KERNEL`` defined in
+``include/asm-generic/siginfo.h``::
+
+    144 #define SI_KERNEL       0x80            /* sent by the kernel from somewhere     */
+
+This macro is used in exactly one place in the x86 kernel: In ``send_signal()``
+in ``kernel/signal.c``::
+
+    816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
+    817                         int group)
+    818 {
+    ...
+    828         pending = group ? &t->signal->shared_pending : &t->pending;
+    ...
+    851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
+    852                                              (is_si_special(info) ||
+    853                                               info->si_code >= 0)));
+    854         if (q) {
+    855                 list_add_tail(&q->list, &pending->list);
+    856                 switch ((unsigned long) info) {
+    ...
+    865                 case (unsigned long) SEND_SIG_PRIV:
+    866                         q->info.si_signo = sig;
+    867                         q->info.si_errno = 0;
+    868                         q->info.si_code = SI_KERNEL;
+    869                         q->info.si_pid = 0;
+    870                         q->info.si_uid = 0;
+    871                         break;
+    ...
+    890 }
+
+Not only does this match with the ``.si_code`` member, it also matches the place
+we found earlier when looking for where siginfo_t objects are enqueued on the
+``shared_pending`` list.
+
+So to sum up: It seems that it is the padding introduced by the compiler
+between two struct fields that is uninitialized, and this gets reported when
+we do a ``memcpy()`` on the struct. This means that we have identified a false
+positive warning.
+
+Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls
+when both the source and destination addresses are tracked. (Instead, we copy
+the shadow bytemap as well). In this case, the destination address clearly
+was not tracked. We can dig a little deeper into the stack trace from above::
+
+	arch/x86/kernel/signal.c:805
+	arch/x86/kernel/signal.c:871
+	arch/x86/kernel/entry_64.S:694
+
+And we clearly see that the destination siginfo object is located on the
+stack::
+
+    782 static void do_signal(struct pt_regs *regs)
+    783 {
+    784         struct k_sigaction ka;
+    785         siginfo_t info;
+    ...
+    804         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+    ...
+    854 }
+
+And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the
+destination argument.
+
+Now, even though we didn't find an actual error here, the example is still a
+good one, because it shows how one would go about to find out what the report
+was all about.
+
+
+Annotating false positives
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There are a few different ways to make annotations in the source code that
+will keep kmemcheck from checking and reporting certain allocations. Here
+they are:
+
+- ``__GFP_NOTRACK_FALSE_POSITIVE``
+        This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()``
+	(therefore also to other functions that end up calling one of
+	these) to indicate that the allocation should not be tracked
+	because it would lead to a false positive report. This is a "big
+	hammer" way of silencing kmemcheck; after all, even if the false
+	positive pertains to particular field in a struct, for example, we
+	will now lose the ability to find (real) errors in other parts of
+	the same struct.
+
+	Example::
+
+	    /* No warnings will ever trigger on accessing any part of x */
+	    x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
+
+- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and
+	``kmemcheck_annotate_bitfield(ptr, name)``
+	The first two of these three macros can be used inside struct
+	definitions to signal, respectively, the beginning and end of a
+	bitfield. Additionally, this will assign the bitfield a name, which
+	is given as an argument to the macros.
+
+	Having used these markers, one can later use
+	kmemcheck_annotate_bitfield() at the point of allocation, to indicate
+	which parts of the allocation is part of a bitfield.
+
+	Example::
+
+	    struct foo {
+		int x;
+
+		kmemcheck_bitfield_begin(flags);
+		int flag_a:1;
+		int flag_b:1;
+		kmemcheck_bitfield_end(flags);
+
+		int y;
+	    };
+
+	    struct foo *x = kmalloc(sizeof *x);
+
+	    /* No warnings will trigger on accessing the bitfield of x */
+	    kmemcheck_annotate_bitfield(x, flags);
+
+	Note that ``kmemcheck_annotate_bitfield()`` can be used even before the
+	return value of ``kmalloc()`` is checked -- in other words, passing NULL
+	as the first argument is legal (and will do nothing).
+
+
+Reporting errors
+----------------
+
+As we have seen, kmemcheck will produce false positive reports. Therefore, it
+is not very wise to blindly post kmemcheck warnings to mailing lists and
+maintainers. Instead, I encourage maintainers and developers to find errors
+in their own code. If you get a warning, you can try to work around it, try
+to figure out if it's a real error or not, or simply ignore it. Most
+developers know their own code and will quickly and efficiently determine the
+root cause of a kmemcheck report. This is therefore also the most efficient
+way to work with kmemcheck.
+
+That said, we (the kmemcheck maintainers) will always be on the lookout for
+false positives that we can annotate and silence. So whatever you find,
+please drop us a note privately! Kernel configs and steps to reproduce (if
+available) are of course a great help too.
+
+Happy hacking!
+
+
+Technical description
+---------------------
+
+kmemcheck works by marking memory pages non-present. This means that whenever
+somebody attempts to access the page, a page fault is generated. The page
+fault handler notices that the page was in fact only hidden, and so it calls
+on the kmemcheck code to make further investigations.
+
+When the investigations are completed, kmemcheck "shows" the page by marking
+it present (as it would be under normal circumstances). This way, the
+interrupted code can continue as usual.
+
+But after the instruction has been executed, we should hide the page again, so
+that we can catch the next access too! Now kmemcheck makes use of a debugging
+feature of the processor, namely single-stepping. When the processor has
+finished the one instruction that generated the memory access, a debug
+exception is raised. From here, we simply hide the page again and continue
+execution, this time with the single-stepping feature turned off.
+
+kmemcheck requires some assistance from the memory allocator in order to work.
+The memory allocator needs to
+
+  1. Tell kmemcheck about newly allocated pages and pages that are about to
+     be freed. This allows kmemcheck to set up and tear down the shadow memory
+     for the pages in question. The shadow memory stores the status of each
+     byte in the allocation proper, e.g. whether it is initialized or
+     uninitialized.
+
+  2. Tell kmemcheck which parts of memory should be marked uninitialized.
+     There are actually a few more states, such as "not yet allocated" and
+     "recently freed".
+
+If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
+memory that can take page faults because of kmemcheck.
+
+If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
+request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
+This does not prevent the page faults from occurring, however, but marks the
+object in question as being initialized so that no warnings will ever be
+produced for this object.
+
+Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 3b6382a..43f7dee 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -21,3 +21,4 @@ whole; patches welcome!
    kasan
    ubsan
    kmemleak
+   kmemcheck
diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt
deleted file mode 100644
index 80aae85..0000000
--- a/Documentation/kmemcheck.txt
+++ /dev/null
@@ -1,754 +0,0 @@
-GETTING STARTED WITH KMEMCHECK
-==============================
-
-Vegard Nossum <vegardno@ifi.uio.no>
-
-
-Contents
-========
-0. Introduction
-1. Downloading
-2. Configuring and compiling
-3. How to use
-3.1. Booting
-3.2. Run-time enable/disable
-3.3. Debugging
-3.4. Annotating false positives
-4. Reporting errors
-5. Technical description
-
-
-0. Introduction
-===============
-
-kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
-is a dynamic checker that detects and warns about some uses of uninitialized
-memory.
-
-Userspace programmers might be familiar with Valgrind's memcheck. The main
-difference between memcheck and kmemcheck is that memcheck works for userspace
-programs only, and kmemcheck works for the kernel only. The implementations
-are of course vastly different. Because of this, kmemcheck is not as accurate
-as memcheck, but it turns out to be good enough in practice to discover real
-programmer errors that the compiler is not able to find through static
-analysis.
-
-Enabling kmemcheck on a kernel will probably slow it down to the extent that
-the machine will not be usable for normal workloads such as e.g. an
-interactive desktop. kmemcheck will also cause the kernel to use about twice
-as much memory as normal. For this reason, kmemcheck is strictly a debugging
-feature.
-
-
-1. Downloading
-==============
-
-As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
-
-
-2. Configuring and compiling
-============================
-
-kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
-configuration variables must have specific settings in order for the kmemcheck
-menu to even appear in "menuconfig". These are:
-
-  o CONFIG_CC_OPTIMIZE_FOR_SIZE=n
-
-	This option is located under "General setup" / "Optimize for size".
-
-	Without this, gcc will use certain optimizations that usually lead to
-	false positive warnings from kmemcheck. An example of this is a 16-bit
-	field in a struct, where gcc may load 32 bits, then discard the upper
-	16 bits. kmemcheck sees only the 32-bit load, and may trigger a
-	warning for the upper 16 bits (if they're uninitialized).
-
-  o CONFIG_SLAB=y or CONFIG_SLUB=y
-
-	This option is located under "General setup" / "Choose SLAB
-	allocator".
-
-  o CONFIG_FUNCTION_TRACER=n
-
-	This option is located under "Kernel hacking" / "Tracers" / "Kernel
-	Function Tracer"
-
-	When function tracing is compiled in, gcc emits a call to another
-	function at the beginning of every function. This means that when the
-	page fault handler is called, the ftrace framework will be called
-	before kmemcheck has had a chance to handle the fault. If ftrace then
-	modifies memory that was tracked by kmemcheck, the result is an
-	endless recursive page fault.
-
-  o CONFIG_DEBUG_PAGEALLOC=n
-
-	This option is located under "Kernel hacking" / "Memory Debugging"
-	 / "Debug page memory allocations".
-
-In addition, I highly recommend turning on CONFIG_DEBUG_INFO=y. This is also
-located under "Kernel hacking". With this, you will be able to get line number
-information from the kmemcheck warnings, which is extremely valuable in
-debugging a problem. This option is not mandatory, however, because it slows
-down the compilation process and produces a much bigger kernel image.
-
-Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
-Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
-a description of the kmemcheck configuration variables:
-
-  o CONFIG_KMEMCHECK
-
-	This must be enabled in order to use kmemcheck at all...
-
-  o CONFIG_KMEMCHECK_[DISABLED | ENABLED | ONESHOT]_BY_DEFAULT
-
-	This option controls the status of kmemcheck at boot-time. "Enabled"
-	will enable kmemcheck right from the start, "disabled" will boot the
-	kernel as normal (but with the kmemcheck code compiled in, so it can
-	be enabled at run-time after the kernel has booted), and "one-shot" is
-	a special mode which will turn kmemcheck off automatically after
-	detecting the first use of uninitialized memory.
-
-	If you are using kmemcheck to actively debug a problem, then you
-	probably want to choose "enabled" here.
-
-	The one-shot mode is mostly useful in automated test setups because it
-	can prevent floods of warnings and increase the chances of the machine
-	surviving in case something is really wrong. In other cases, the one-
-	shot mode could actually be counter-productive because it would turn
-	itself off at the very first error -- in the case of a false positive
-	too -- and this would come in the way of debugging the specific
-	problem you were interested in.
-
-	If you would like to use your kernel as normal, but with a chance to
-	enable kmemcheck in case of some problem, it might be a good idea to
-	choose "disabled" here. When kmemcheck is disabled, most of the run-
-	time overhead is not incurred, and the kernel will be almost as fast
-	as normal.
-
-  o CONFIG_KMEMCHECK_QUEUE_SIZE
-
-	Select the maximum number of error reports to store in an internal
-	(fixed-size) buffer. Since errors can occur virtually anywhere and in
-	any context, we need a temporary storage area which is guaranteed not
-	to generate any other page faults when accessed. The queue will be
-	emptied as soon as a tasklet may be scheduled. If the queue is full,
-	new error reports will be lost.
-
-	The default value of 64 is probably fine. If some code produces more
-	than 64 errors within an irqs-off section, then the code is likely to
-	produce many, many more, too, and these additional reports seldom give
-	any more information (the first report is usually the most valuable
-	anyway).
-
-	This number might have to be adjusted if you are not using serial
-	console or similar to capture the kernel log. If you are using the
-	"dmesg" command to save the log, then getting a lot of kmemcheck
-	warnings might overflow the kernel log itself, and the earlier reports
-	will get lost in that way instead. Try setting this to 10 or so on
-	such a setup.
-
-  o CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT
-
-	Select the number of shadow bytes to save along with each entry of the
-	error-report queue. These bytes indicate what parts of an allocation
-	are initialized, uninitialized, etc. and will be displayed when an
-	error is detected to help the debugging of a particular problem.
-
-	The number entered here is actually the logarithm of the number of
-	bytes that will be saved. So if you pick for example 5 here, kmemcheck
-	will save 2^5 = 32 bytes.
-
-	The default value should be fine for debugging most problems. It also
-	fits nicely within 80 columns.
-
-  o CONFIG_KMEMCHECK_PARTIAL_OK
-
-	This option (when enabled) works around certain GCC optimizations that
-	produce 32-bit reads from 16-bit variables where the upper 16 bits are
-	thrown away afterwards.
-
-	The default value (enabled) is recommended. This may of course hide
-	some real errors, but disabling it would probably produce a lot of
-	false positives.
-
-  o CONFIG_KMEMCHECK_BITOPS_OK
-
-	This option silences warnings that would be generated for bit-field
-	accesses where not all the bits are initialized at the same time. This
-	may also hide some real bugs.
-
-	This option is probably obsolete, or it should be replaced with
-	the kmemcheck-/bitfield-annotations for the code in question. The
-	default value is therefore fine.
-
-Now compile the kernel as usual.
-
-
-3. How to use
-=============
-
-3.1. Booting
-============
-
-First some information about the command-line options. There is only one
-option specific to kmemcheck, and this is called "kmemcheck". It can be used
-to override the default mode as chosen by the CONFIG_KMEMCHECK_*_BY_DEFAULT
-option. Its possible settings are:
-
-  o kmemcheck=0 (disabled)
-  o kmemcheck=1 (enabled)
-  o kmemcheck=2 (one-shot mode)
-
-If SLUB debugging has been enabled in the kernel, it may take precedence over
-kmemcheck in such a way that the slab caches which are under SLUB debugging
-will not be tracked by kmemcheck. In order to ensure that this doesn't happen
-(even though it shouldn't by default), use SLUB's boot option "slub_debug",
-like this: slub_debug=-
-
-In fact, this option may also be used for fine-grained control over SLUB vs.
-kmemcheck. For example, if the command line includes "kmemcheck=1
-slub_debug=,dentry", then SLUB debugging will be used only for the "dentry"
-slab cache, and with kmemcheck tracking all the other caches. This is advanced
-usage, however, and is not generally recommended.
-
-
-3.2. Run-time enable/disable
-============================
-
-When the kernel has booted, it is possible to enable or disable kmemcheck at
-run-time. WARNING: This feature is still experimental and may cause false
-positive warnings to appear. Therefore, try not to use this. If you find that
-it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
-will be happy to take bug reports.
-
-Use the file /proc/sys/kernel/kmemcheck for this purpose, e.g.:
-
-	$ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
-
-The numbers are the same as for the kmemcheck= command-line option.
-
-
-3.3. Debugging
-==============
-
-A typical report will look something like this:
-
-WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-         ^
-
-Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
-RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
-RSP: 0018:ffff88003cdf7d98  EFLAGS: 00210002
-RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
-RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
-RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
-R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
-R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
-FS:  0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
-CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
-CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
-DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
-DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
- [<ffffffffffffffff>] 0xffffffffffffffff
-
-The single most valuable information in this report is the RIP (or EIP on 32-
-bit) value. This will help us pinpoint exactly which instruction that caused
-the warning.
-
-If your kernel was compiled with CONFIG_DEBUG_INFO=y, then all we have to do
-is give this address to the addr2line program, like this:
-
-	$ addr2line -e vmlinux -i ffffffff8104ede8
-	arch/x86/include/asm/string_64.h:12
-	include/asm-generic/siginfo.h:287
-	kernel/signal.c:380
-	kernel/signal.c:410
-
-The "-e vmlinux" tells addr2line which file to look in. IMPORTANT: This must
-be the vmlinux of the kernel that produced the warning in the first place! If
-not, the line number information will almost certainly be wrong.
-
-The "-i" tells addr2line to also print the line numbers of inlined functions.
-In this case, the flag was very important, because otherwise, it would only
-have printed the first line, which is just a call to memcpy(), which could be
-called from a thousand places in the kernel, and is therefore not very useful.
-These inlined functions would not show up in the stack trace above, simply
-because the kernel doesn't load the extra debugging information. This
-technique can of course be used with ordinary kernel oopses as well.
-
-In this case, it's the caller of memcpy() that is interesting, and it can be
-found in include/asm-generic/siginfo.h, line 287:
-
-281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-282 {
-283         if (from->si_code < 0)
-284                 memcpy(to, from, sizeof(*to));
-285         else
-286                 /* _sigchld is currently the largest know union member */
-287                 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
-288 }
-
-Since this was a read (kmemcheck usually warns about reads only, though it can
-warn about writes to unallocated or freed memory as well), it was probably the
-"from" argument which contained some uninitialized bytes. Following the chain
-of calls, we move upwards to see where "from" was allocated or initialized,
-kernel/signal.c, line 380:
-
-359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
-360 {
-...
-367         list_for_each_entry(q, &list->list, list) {
-368                 if (q->info.si_signo == sig) {
-369                         if (first)
-370                                 goto still_pending;
-371                         first = q;
-...
-377         if (first) {
-378 still_pending:
-379                 list_del_init(&first->list);
-380                 copy_siginfo(info, &first->info);
-381                 __sigqueue_free(first);
-...
-392         }
-393 }
-
-Here, it is &first->info that is being passed on to copy_siginfo(). The
-variable "first" was found on a list -- passed in as the second argument to
-collect_signal(). We  continue our journey through the stack, to figure out
-where the item on "list" was allocated or initialized. We move to line 410:
-
-395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
-396                         siginfo_t *info)
-397 {
-...
-410                 collect_signal(sig, pending, info);
-...
-414 }
-
-Now we need to follow the "pending" pointer, since that is being passed on to
-collect_signal() as "list". At this point, we've run out of lines from the
-"addr2line" output. Not to worry, we just paste the next addresses from the
-kmemcheck stack dump, i.e.:
-
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
-
-	$ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
-		ffffffff8100b87d ffffffff8100c7b5
-	kernel/signal.c:446
-	kernel/signal.c:1806
-	arch/x86/kernel/signal.c:805
-	arch/x86/kernel/signal.c:871
-	arch/x86/kernel/entry_64.S:694
-
-Remember that since these addresses were found on the stack and not as the
-RIP value, they actually point to the _next_ instruction (they are return
-addresses). This becomes obvious when we look at the code for line 446:
-
-422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
-423 {
-...
-431                 signr = __dequeue_signal(&tsk->signal->shared_pending,
-432                                          mask, info);
-433                 /*
-434                  * itimer signal ?
-435                  *
-436                  * itimers are process shared and we restart periodic
-437                  * itimers in the signal delivery path to prevent DoS
-438                  * attacks in the high resolution timer case. This is
-439                  * compliant with the old way of self restarting
-440                  * itimers, as the SIGALRM is a legacy signal and only
-441                  * queued once. Changing the restart behaviour to
-442                  * restart the timer in the signal dequeue path is
-443                  * reducing the timer noise on heavy loaded !highres
-444                  * systems too.
-445                  */
-446                 if (unlikely(signr == SIGALRM)) {
-...
-489 }
-
-So instead of looking at 446, we should be looking at 431, which is the line
-that executes just before 446. Here we see that what we are looking for is
-&tsk->signal->shared_pending.
-
-Our next task is now to figure out which function that puts items on this
-"shared_pending" list. A crude, but efficient tool, is git grep:
-
-	$ git grep -n 'shared_pending' kernel/
-	...
-	kernel/signal.c:828:    pending = group ? &t->signal->shared_pending : &t->pending;
-	kernel/signal.c:1339:   pending = group ? &t->signal->shared_pending : &t->pending;
-	...
-
-There were more results, but none of them were related to list operations,
-and these were the only assignments. We inspect the line numbers more closely
-and find that this is indeed where items are being added to the list:
-
-816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
-817                         int group)
-818 {
-...
-828         pending = group ? &t->signal->shared_pending : &t->pending;
-...
-851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
-852                                              (is_si_special(info) ||
-853                                               info->si_code >= 0)));
-854         if (q) {
-855                 list_add_tail(&q->list, &pending->list);
-...
-890 }
-
-and:
-
-1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
-1310 {
-....
-1339         pending = group ? &t->signal->shared_pending : &t->pending;
-1340         list_add_tail(&q->list, &pending->list);
-....
-1347 }
-
-In the first case, the list element we are looking for, "q", is being returned
-from the function __sigqueue_alloc(), which looks like an allocation function.
-Let's take a look at it:
-
-187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
-188                                          int override_rlimit)
-189 {
-190         struct sigqueue *q = NULL;
-191         struct user_struct *user;
-192 
-193         /*
-194          * We won't get problems with the target's UID changing under us
-195          * because changing it requires RCU be used, and if t != current, the
-196          * caller must be holding the RCU readlock (by way of a spinlock) and
-197          * we use RCU protection here
-198          */
-199         user = get_uid(__task_cred(t)->user);
-200         atomic_inc(&user->sigpending);
-201         if (override_rlimit ||
-202             atomic_read(&user->sigpending) <=
-203                         t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
-204                 q = kmem_cache_alloc(sigqueue_cachep, flags);
-205         if (unlikely(q == NULL)) {
-206                 atomic_dec(&user->sigpending);
-207                 free_uid(user);
-208         } else {
-209                 INIT_LIST_HEAD(&q->list);
-210                 q->flags = 0;
-211                 q->user = user;
-212         }
-213 
-214         return q;
-215 }
-
-We see that this function initializes q->list, q->flags, and q->user. It seems
-that now is the time to look at the definition of "struct sigqueue", e.g.:
-
-14 struct sigqueue {
-15         struct list_head list;
-16         int flags;
-17         siginfo_t info;
-18         struct user_struct *user;
-19 };
-
-And, you might remember, it was a memcpy() on &first->info that caused the
-warning, so this makes perfect sense. It also seems reasonable to assume that
-it is the caller of __sigqueue_alloc() that has the responsibility of filling
-out (initializing) this member.
-
-But just which fields of the struct were uninitialized? Let's look at
-kmemcheck's report again:
-
-WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-         ^
-
-These first two lines are the memory dump of the memory object itself, and the
-shadow bytemap, respectively. The memory object itself is in this case
-&first->info. Just beware that the start of this dump is NOT the start of the
-object itself! The position of the caret (^) corresponds with the address of
-the read (ffff88003e4a2024).
-
-The shadow bytemap dump legend is as follows:
-
-  i - initialized
-  u - uninitialized
-  a - unallocated (memory has been allocated by the slab layer, but has not
-      yet been handed off to anybody)
-  f - freed (memory has been allocated by the slab layer, but has been freed
-      by the previous owner)
-
-In order to figure out where (relative to the start of the object) the
-uninitialized memory was located, we have to look at the disassembly. For
-that, we'll need the RIP address again:
-
-RIP: 0010:[<ffffffff8104ede8>]  [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
-
-	$ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
-	ffffffff8104edc8:       mov    %r8,0x8(%r8)
-	ffffffff8104edcc:       test   %r10d,%r10d
-	ffffffff8104edcf:       js     ffffffff8104ee88 <__dequeue_signal+0x168>
-	ffffffff8104edd5:       mov    %rax,%rdx
-	ffffffff8104edd8:       mov    $0xc,%ecx
-	ffffffff8104eddd:       mov    %r13,%rdi
-	ffffffff8104ede0:       mov    $0x30,%eax
-	ffffffff8104ede5:       mov    %rdx,%rsi
-	ffffffff8104ede8:       rep movsl %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edea:       test   $0x2,%al
-	ffffffff8104edec:       je     ffffffff8104edf0 <__dequeue_signal+0xd0>
-	ffffffff8104edee:       movsw  %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edf0:       test   $0x1,%al
-	ffffffff8104edf2:       je     ffffffff8104edf5 <__dequeue_signal+0xd5>
-	ffffffff8104edf4:       movsb  %ds:(%rsi),%es:(%rdi)
-	ffffffff8104edf5:       mov    %r8,%rdi
-	ffffffff8104edf8:       callq  ffffffff8104de60 <__sigqueue_free>
-
-As expected, it's the "rep movsl" instruction from the memcpy() that causes
-the warning. We know about REP MOVSL that it uses the register RCX to count
-the number of remaining iterations. By taking a look at the register dump
-again (from the kmemcheck report), we can figure out how many bytes were left
-to copy:
-
-RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
-
-By looking at the disassembly, we also see that %ecx is being loaded with the
-value $0xc just before (ffffffff8104edd8), so we are very lucky. Keep in mind
-that this is the number of iterations, not bytes. And since this is a "long"
-operation, we need to multiply by 4 to get the number of bytes. So this means
-that the uninitialized value was encountered at 4 * (0xc - 0x9) = 12 bytes
-from the start of the object.
-
-We can now try to figure out which field of the "struct siginfo" that was not
-initialized. This is the beginning of the struct:
-
-40 typedef struct siginfo {
-41         int si_signo;
-42         int si_errno;
-43         int si_code;
-44                 
-45         union {
-..
-92         } _sifields;
-93 } siginfo_t;
-
-On 64-bit, the int is 4 bytes long, so it must the union member that has
-not been initialized. We can verify this using gdb:
-
-	$ gdb vmlinux
-	...
-	(gdb) p &((struct siginfo *) 0)->_sifields
-	$1 = (union {...} *) 0x10
-
-Actually, it seems that the union member is located at offset 0x10 -- which
-means that gcc has inserted 4 bytes of padding between the members si_code
-and _sifields. We can now get a fuller picture of the memory dump:
-
-         _----------------------------=> si_code
-        /        _--------------------=> (padding)
-       |        /        _------------=> _sifields(._kill._pid)
-       |       |        /        _----=> _sifields(._kill._uid)
-       |       |       |        / 
--------|-------|-------|-------|
-80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-
-This allows us to realize another important fact: si_code contains the value
-0x80. Remember that x86 is little endian, so the first 4 bytes "80000000" are
-really the number 0x00000080. With a bit of research, we find that this is
-actually the constant SI_KERNEL defined in include/asm-generic/siginfo.h:
-
-144 #define SI_KERNEL       0x80            /* sent by the kernel from somewhere     */
-
-This macro is used in exactly one place in the x86 kernel: In send_signal()
-in kernel/signal.c:
-
-816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
-817                         int group)
-818 {
-...
-828         pending = group ? &t->signal->shared_pending : &t->pending;
-...
-851         q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
-852                                              (is_si_special(info) ||
-853                                               info->si_code >= 0)));
-854         if (q) {
-855                 list_add_tail(&q->list, &pending->list);
-856                 switch ((unsigned long) info) {
-...
-865                 case (unsigned long) SEND_SIG_PRIV:
-866                         q->info.si_signo = sig;
-867                         q->info.si_errno = 0;
-868                         q->info.si_code = SI_KERNEL;
-869                         q->info.si_pid = 0;
-870                         q->info.si_uid = 0;
-871                         break;
-...
-890 }
-
-Not only does this match with the .si_code member, it also matches the place
-we found earlier when looking for where siginfo_t objects are enqueued on the
-"shared_pending" list.
-
-So to sum up: It seems that it is the padding introduced by the compiler
-between two struct fields that is uninitialized, and this gets reported when
-we do a memcpy() on the struct. This means that we have identified a false
-positive warning.
-
-Normally, kmemcheck will not report uninitialized accesses in memcpy() calls
-when both the source and destination addresses are tracked. (Instead, we copy
-the shadow bytemap as well). In this case, the destination address clearly
-was not tracked. We can dig a little deeper into the stack trace from above:
-
-	arch/x86/kernel/signal.c:805
-	arch/x86/kernel/signal.c:871
-	arch/x86/kernel/entry_64.S:694
-
-And we clearly see that the destination siginfo object is located on the
-stack:
-
-782 static void do_signal(struct pt_regs *regs)
-783 {
-784         struct k_sigaction ka;
-785         siginfo_t info;
-...
-804         signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-...
-854 }
-
-And this &info is what eventually gets passed to copy_siginfo() as the
-destination argument.
-
-Now, even though we didn't find an actual error here, the example is still a
-good one, because it shows how one would go about to find out what the report
-was all about.
-
-
-3.4. Annotating false positives
-===============================
-
-There are a few different ways to make annotations in the source code that
-will keep kmemcheck from checking and reporting certain allocations. Here
-they are:
-
-  o __GFP_NOTRACK_FALSE_POSITIVE
-
-	This flag can be passed to kmalloc() or kmem_cache_alloc() (therefore
-	also to other functions that end up calling one of these) to indicate
-	that the allocation should not be tracked because it would lead to
-	a false positive report. This is a "big hammer" way of silencing
-	kmemcheck; after all, even if the false positive pertains to 
-	particular field in a struct, for example, we will now lose the
-	ability to find (real) errors in other parts of the same struct.
-
-	Example:
-
-	    /* No warnings will ever trigger on accessing any part of x */
-	    x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
-
-  o kmemcheck_bitfield_begin(name)/kmemcheck_bitfield_end(name) and
-	kmemcheck_annotate_bitfield(ptr, name)
-
-	The first two of these three macros can be used inside struct
-	definitions to signal, respectively, the beginning and end of a
-	bitfield. Additionally, this will assign the bitfield a name, which
-	is given as an argument to the macros.
-
-	Having used these markers, one can later use
-	kmemcheck_annotate_bitfield() at the point of allocation, to indicate
-	which parts of the allocation is part of a bitfield.
-
-	Example:
-
-	    struct foo {
-		int x;
-
-		kmemcheck_bitfield_begin(flags);
-		int flag_a:1;
-		int flag_b:1;
-		kmemcheck_bitfield_end(flags);
-
-		int y;
-	    };
-
-	    struct foo *x = kmalloc(sizeof *x);
-
-	    /* No warnings will trigger on accessing the bitfield of x */
-	    kmemcheck_annotate_bitfield(x, flags);
-
-	Note that kmemcheck_annotate_bitfield() can be used even before the
-	return value of kmalloc() is checked -- in other words, passing NULL
-	as the first argument is legal (and will do nothing).
-
-
-4. Reporting errors
-===================
-
-As we have seen, kmemcheck will produce false positive reports. Therefore, it
-is not very wise to blindly post kmemcheck warnings to mailing lists and
-maintainers. Instead, I encourage maintainers and developers to find errors
-in their own code. If you get a warning, you can try to work around it, try
-to figure out if it's a real error or not, or simply ignore it. Most
-developers know their own code and will quickly and efficiently determine the
-root cause of a kmemcheck report. This is therefore also the most efficient
-way to work with kmemcheck.
-
-That said, we (the kmemcheck maintainers) will always be on the lookout for
-false positives that we can annotate and silence. So whatever you find,
-please drop us a note privately! Kernel configs and steps to reproduce (if
-available) are of course a great help too.
-
-Happy hacking!
-
-
-5. Technical description
-========================
-
-kmemcheck works by marking memory pages non-present. This means that whenever
-somebody attempts to access the page, a page fault is generated. The page
-fault handler notices that the page was in fact only hidden, and so it calls
-on the kmemcheck code to make further investigations.
-
-When the investigations are completed, kmemcheck "shows" the page by marking
-it present (as it would be under normal circumstances). This way, the
-interrupted code can continue as usual.
-
-But after the instruction has been executed, we should hide the page again, so
-that we can catch the next access too! Now kmemcheck makes use of a debugging
-feature of the processor, namely single-stepping. When the processor has
-finished the one instruction that generated the memory access, a debug
-exception is raised. From here, we simply hide the page again and continue
-execution, this time with the single-stepping feature turned off.
-
-kmemcheck requires some assistance from the memory allocator in order to work.
-The memory allocator needs to
-
-  1. Tell kmemcheck about newly allocated pages and pages that are about to
-     be freed. This allows kmemcheck to set up and tear down the shadow memory
-     for the pages in question. The shadow memory stores the status of each
-     byte in the allocation proper, e.g. whether it is initialized or
-     uninitialized.
-
-  2. Tell kmemcheck which parts of memory should be marked uninitialized.
-     There are actually a few more states, such as "not yet allocated" and
-     "recently freed".
-
-If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
-memory that can take page faults because of kmemcheck.
-
-If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
-request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
-This does not prevent the page faults from occurring, however, but marks the
-object in question as being initialized so that no warnings will ever be
-produced for this object.
-
-Currently, the SLAB and SLUB allocators are supported by kmemcheck.
diff --git a/MAINTAINERS b/MAINTAINERS
index b235e0d..8107235 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6803,7 +6803,7 @@ KMEMCHECK
 M:	Vegard Nossum <vegardno@ifi.uio.no>
 M:	Pekka Enberg <penberg@kernel.org>
 S:	Maintained
-F:	Documentation/kmemcheck.txt
+F:	Documentation/dev-tools/kmemcheck.rst
 F:	arch/x86/include/asm/kmemcheck.h
 F:	arch/x86/mm/kmemcheck/
 F:	include/linux/kmemcheck.h
-- 
2.9.2

[PATCH 10/10] docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools

[Jonathan Corbet]

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 .../gdb-kernel-debugging.rst}                      | 77 +++++++++++++---------
 Documentation/dev-tools/tools.rst                  |  1 +
 2 files changed, 46 insertions(+), 32 deletions(-)
 rename Documentation/{gdb-kernel-debugging.txt => dev-tools/gdb-kernel-debugging.rst} (73%)

diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/dev-tools/gdb-kernel-debugging.rst
similarity index 73%
rename from Documentation/gdb-kernel-debugging.txt
rename to Documentation/dev-tools/gdb-kernel-debugging.rst
index 7050ce8..5e93c9b 100644
--- a/Documentation/gdb-kernel-debugging.txt
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -1,3 +1,5 @@
+.. highlight:: none
+
 Debugging kernel and modules via gdb
 ====================================
 
@@ -13,54 +15,58 @@ be transferred to the other gdb stubs as well.
 Requirements
 ------------
 
- o gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
-   for distributions)
+- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
+  for distributions)
 
 
 Setup
 -----
 
- o Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
-   www.qemu.org for more details). For cross-development,
-   http://landley.net/aboriginal/bin keeps a pool of machine images and
-   toolchains that can be helpful to start from.
+- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
+  www.qemu.org for more details). For cross-development,
+  http://landley.net/aboriginal/bin keeps a pool of machine images and
+  toolchains that can be helpful to start from.
 
- o Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
-   CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
-   CONFIG_FRAME_POINTER, keep it enabled.
+- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
+  CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
+  CONFIG_FRAME_POINTER, keep it enabled.
 
- o Install that kernel on the guest.
+- Install that kernel on the guest.
+  Alternatively, QEMU allows to boot the kernel directly using -kernel,
+  -append, -initrd command line switches. This is generally only useful if
+  you do not depend on modules. See QEMU documentation for more details on
+  this mode.
 
-   Alternatively, QEMU allows to boot the kernel directly using -kernel,
-   -append, -initrd command line switches. This is generally only useful if
-   you do not depend on modules. See QEMU documentation for more details on
-   this mode.
+- Enable the gdb stub of QEMU/KVM, either
 
- o Enable the gdb stub of QEMU/KVM, either
     - at VM startup time by appending "-s" to the QEMU command line
-   or
+
+  or
+
     - during runtime by issuing "gdbserver" from the QEMU monitor
       console
 
- o cd /path/to/linux-build
+- cd /path/to/linux-build
 
- o Start gdb: gdb vmlinux
+- Start gdb: gdb vmlinux
 
-   Note: Some distros may restrict auto-loading of gdb scripts to known safe
-   directories. In case gdb reports to refuse loading vmlinux-gdb.py, add
+  Note: Some distros may restrict auto-loading of gdb scripts to known safe
+  directories. In case gdb reports to refuse loading vmlinux-gdb.py, add::
 
     add-auto-load-safe-path /path/to/linux-build
 
-   to ~/.gdbinit. See gdb help for more details.
+  to ~/.gdbinit. See gdb help for more details.
+
+- Attach to the booted guest::
 
- o Attach to the booted guest:
     (gdb) target remote :1234
 
 
 Examples of using the Linux-provided gdb helpers
 ------------------------------------------------
 
- o Load module (and main kernel) symbols:
+- Load module (and main kernel) symbols::
+
     (gdb) lx-symbols
     loading vmlinux
     scanning for modules in /home/user/linux/build
@@ -72,17 +78,20 @@ Examples of using the Linux-provided gdb helpers
     ...
     loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
 
- o Set a breakpoint on some not yet loaded module function, e.g.:
+- Set a breakpoint on some not yet loaded module function, e.g.::
+
     (gdb) b btrfs_init_sysfs
     Function "btrfs_init_sysfs" not defined.
     Make breakpoint pending on future shared library load? (y or [n]) y
     Breakpoint 1 (btrfs_init_sysfs) pending.
 
- o Continue the target
+- Continue the target::
+
     (gdb) c
 
- o Load the module on the target and watch the symbols being loaded as well as
-   the breakpoint hit:
+- Load the module on the target and watch the symbols being loaded as well as
+  the breakpoint hit::
+
     loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
     loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
     loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
@@ -91,7 +100,8 @@ Examples of using the Linux-provided gdb helpers
     Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
     36              btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
 
- o Dump the log buffer of the target kernel:
+- Dump the log buffer of the target kernel::
+
     (gdb) lx-dmesg
     [     0.000000] Initializing cgroup subsys cpuset
     [     0.000000] Initializing cgroup subsys cpu
@@ -102,19 +112,22 @@ Examples of using the Linux-provided gdb helpers
     [     0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
     ....
 
- o Examine fields of the current task struct:
+- Examine fields of the current task struct::
+
     (gdb) p $lx_current().pid
     $1 = 4998
     (gdb) p $lx_current().comm
     $2 = "modprobe\000\000\000\000\000\000\000"
 
- o Make use of the per-cpu function for the current or a specified CPU:
+- Make use of the per-cpu function for the current or a specified CPU::
+
     (gdb) p $lx_per_cpu("runqueues").nr_running
     $3 = 1
     (gdb) p $lx_per_cpu("runqueues", 2).nr_running
     $4 = 0
 
- o Dig into hrtimers using the container_of helper:
+- Dig into hrtimers using the container_of helper::
+
     (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
     (gdb) p *$container_of($next, "struct hrtimer", "node")
     $5 = {
@@ -144,7 +157,7 @@ List of commands and functions
 ------------------------------
 
 The number of commands and convenience functions may evolve over the time,
-this is just a snapshot of the initial version:
+this is just a snapshot of the initial version::
 
  (gdb) apropos lx
  function lx_current -- Return current task
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index 43f7dee..824ae8e 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -22,3 +22,4 @@ whole; patches welcome!
    ubsan
    kmemleak
    kmemcheck
+   gdb-kernel-debugging
-- 
2.9.2

Re: [PATCH 02/10] docs: sphinxify coccinelle.txt and add it to dev-tools

[Julia Lawall]

Acked-by: Julia Lawall <julia.lawall@lip6.fr>

On Mon, 8 Aug 2016, Jonathan Corbet wrote:

> No textual changes have been made, but the formatting has obviously been
> tweaked.
>
> Cc: Michal Marek <mmarek@suse.com>
> Cc: Gilles Muller <Gilles.Muller@lip6.fr>
> Cc: Nicolas Palix <nicolas.palix@imag.fr>
> Cc: Julia Lawall <julia.lawall@lip6.fr>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
> ---
>  .../{coccinelle.txt => dev-tools/coccinelle.rst}   | 359 +++++++++++----------
>  Documentation/dev-tools/tools.rst                  |   1 +
>  MAINTAINERS                                        |   2 +-
>  3 files changed, 192 insertions(+), 170 deletions(-)
>  rename Documentation/{coccinelle.txt => dev-tools/coccinelle.rst} (56%)
>
> diff --git a/Documentation/coccinelle.txt b/Documentation/dev-tools/coccinelle.rst
> similarity index 56%
> rename from Documentation/coccinelle.txt
> rename to Documentation/dev-tools/coccinelle.rst
> index 01fb1da..4a64b4c 100644
> --- a/Documentation/coccinelle.txt
> +++ b/Documentation/dev-tools/coccinelle.rst
> @@ -1,10 +1,18 @@
> -Copyright 2010 Nicolas Palix <npalix@diku.dk>
> -Copyright 2010 Julia Lawall <julia@diku.dk>
> -Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
> +.. Copyright 2010 Nicolas Palix <npalix@diku.dk>
> +.. Copyright 2010 Julia Lawall <julia@diku.dk>
> +.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
>
> +.. highlight:: none
>
> - Getting Coccinelle
> -~~~~~~~~~~~~~~~~~~~~
> +Coccinelle
> +==========
> +
> +Coccinelle is a tool for pattern matching and text transformation that has
> +many uses in kernel development, including the application of complex,
> +tree-wide patches and detection of problematic programming patterns.
> +
> +Getting Coccinelle
> +-------------------
>
>  The semantic patches included in the kernel use features and options
>  which are provided by Coccinelle version 1.0.0-rc11 and above.
> @@ -22,24 +30,23 @@ of many distributions, e.g. :
>   - NetBSD
>   - FreeBSD
>
> -
>  You can get the latest version released from the Coccinelle homepage at
>  http://coccinelle.lip6.fr/
>
>  Information and tips about Coccinelle are also provided on the wiki
>  pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
>
> -Once you have it, run the following command:
> +Once you have it, run the following command::
>
>       	./configure
>          make
>
> -as a regular user, and install it with
> +as a regular user, and install it with::
>
>          sudo make install
>
> - Supplemental documentation
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Supplemental documentation
> +---------------------------
>
>  For supplemental documentation refer to the wiki:
>
> @@ -47,49 +54,52 @@ https://bottest.wiki.kernel.org/coccicheck
>
>  The wiki documentation always refers to the linux-next version of the script.
>
> - Using Coccinelle on the Linux kernel
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Using Coccinelle on the Linux kernel
> +------------------------------------
>
>  A Coccinelle-specific target is defined in the top level
> -Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
> -front-end in the 'scripts' directory.
> +Makefile. This target is named ``coccicheck`` and calls the ``coccicheck``
> +front-end in the ``scripts`` directory.
>
> -Four basic modes are defined: patch, report, context, and org. The mode to
> -use is specified by setting the MODE variable with 'MODE=<mode>'.
> +Four basic modes are defined: ``patch``, ``report``, ``context``, and
> +``org``. The mode to use is specified by setting the MODE variable with
> +``MODE=<mode>``.
>
> -'patch' proposes a fix, when possible.
> +- ``patch`` proposes a fix, when possible.
>
> -'report' generates a list in the following format:
> +- ``report`` generates a list in the following format:
>    file:line:column-column: message
>
> -'context' highlights lines of interest and their context in a
> -diff-like style.Lines of interest are indicated with '-'.
> +- ``context`` highlights lines of interest and their context in a
> +  diff-like style.Lines of interest are indicated with ``-``.
>
> -'org' generates a report in the Org mode format of Emacs.
> +- ``org`` generates a report in the Org mode format of Emacs.
>
>  Note that not all semantic patches implement all modes. For easy use
>  of Coccinelle, the default mode is "report".
>
>  Two other modes provide some common combinations of these modes.
>
> -'chain' tries the previous modes in the order above until one succeeds.
> +- ``chain`` tries the previous modes in the order above until one succeeds.
> +
> +- ``rep+ctxt`` runs successively the report mode and the context mode.
> +  It should be used with the C option (described later)
> +  which checks the code on a file basis.
>
> -'rep+ctxt' runs successively the report mode and the context mode.
> -	   It should be used with the C option (described later)
> -	   which checks the code on a file basis.
> +Examples
> +~~~~~~~~
>
> -Examples:
> -	To make a report for every semantic patch, run the following command:
> +To make a report for every semantic patch, run the following command::
>
>  		make coccicheck MODE=report
>
> -	To produce patches, run:
> +To produce patches, run::
>
>  		make coccicheck MODE=patch
>
>
>  The coccicheck target applies every semantic patch available in the
> -sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
> +sub-directories of ``scripts/coccinelle`` to the entire Linux kernel.
>
>  For each semantic patch, a commit message is proposed.  It gives a
>  description of the problem being checked by the semantic patch, and
> @@ -99,15 +109,15 @@ As any static code analyzer, Coccinelle produces false
>  positives. Thus, reports must be carefully checked, and patches
>  reviewed.
>
> -To enable verbose messages set the V= variable, for example:
> +To enable verbose messages set the V= variable, for example::
>
>     make coccicheck MODE=report V=1
>
> - Coccinelle parallelization
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Coccinelle parallelization
> +---------------------------
>
>  By default, coccicheck tries to run as parallel as possible. To change
> -the parallelism, set the J= variable. For example, to run across 4 CPUs:
> +the parallelism, set the J= variable. For example, to run across 4 CPUs::
>
>     make coccicheck MODE=report J=4
>
> @@ -115,44 +125,47 @@ As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
>  if support for this is detected you will benefit from parmap parallelization.
>
>  When parmap is enabled coccicheck will enable dynamic load balancing by using
> -'--chunksize 1' argument, this ensures we keep feeding threads with work
> +``--chunksize 1`` argument, this ensures we keep feeding threads with work
>  one by one, so that we avoid the situation where most work gets done by only
>  a few threads. With dynamic load balancing, if a thread finishes early we keep
>  feeding it more work.
>
>  When parmap is enabled, if an error occurs in Coccinelle, this error
> -value is propagated back, the return value of the 'make coccicheck'
> +value is propagated back, the return value of the ``make coccicheck``
>  captures this return value.
>
> - Using Coccinelle with a single semantic patch
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Using Coccinelle with a single semantic patch
> +---------------------------------------------
>
>  The optional make variable COCCI can be used to check a single
>  semantic patch. In that case, the variable must be initialized with
>  the name of the semantic patch to apply.
>
> -For instance:
> +For instance::
>
>  	make coccicheck COCCI=<my_SP.cocci> MODE=patch
> -or
> +
> +or::
> +
>  	make coccicheck COCCI=<my_SP.cocci> MODE=report
>
>
> - Controlling Which Files are Processed by Coccinelle
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Controlling Which Files are Processed by Coccinelle
> +---------------------------------------------------
> +
>  By default the entire kernel source tree is checked.
>
> -To apply Coccinelle to a specific directory, M= can be used.
> -For example, to check drivers/net/wireless/ one may write:
> +To apply Coccinelle to a specific directory, ``M=`` can be used.
> +For example, to check drivers/net/wireless/ one may write::
>
>      make coccicheck M=drivers/net/wireless/
>
>  To apply Coccinelle on a file basis, instead of a directory basis, the
> -following command may be used:
> +following command may be used::
>
>      make C=1 CHECK="scripts/coccicheck"
>
> -To check only newly edited code, use the value 2 for the C flag, i.e.
> +To check only newly edited code, use the value 2 for the C flag, i.e.::
>
>      make C=2 CHECK="scripts/coccicheck"
>
> @@ -166,8 +179,8 @@ semantic patch as shown in the previous section.
>  The "report" mode is the default. You can select another one with the
>  MODE variable explained above.
>
> - Debugging Coccinelle SmPL patches
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Debugging Coccinelle SmPL patches
> +---------------------------------
>
>  Using coccicheck is best as it provides in the spatch command line
>  include options matching the options used when we compile the kernel.
> @@ -177,8 +190,8 @@ manually run Coccinelle with debug options added.
>  Alternatively you can debug running Coccinelle against SmPL patches
>  by asking for stderr to be redirected to stderr, by default stderr
>  is redirected to /dev/null, if you'd like to capture stderr you
> -can specify the DEBUG_FILE="file.txt" option to coccicheck. For
> -instance:
> +can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For
> +instance::
>
>      rm -f cocci.err
>      make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
> @@ -186,7 +199,7 @@ instance:
>
>  You can use SPFLAGS to add debugging flags, for instance you may want to
>  add both --profile --show-trying to SPFLAGS when debugging. For instance
> -you may want to use:
> +you may want to use::
>
>      rm -f err.log
>      export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
> @@ -198,24 +211,24 @@ work.
>
>  DEBUG_FILE support is only supported when using coccinelle >= 1.2.
>
> - .cocciconfig support
> -~~~~~~~~~~~~~~~~~~~~~~
> +.cocciconfig support
> +--------------------
>
>  Coccinelle supports reading .cocciconfig for default Coccinelle options that
>  should be used every time spatch is spawned, the order of precedence for
>  variables for .cocciconfig is as follows:
>
> -  o Your current user's home directory is processed first
> -  o Your directory from which spatch is called is processed next
> -  o The directory provided with the --dir option is processed last, if used
> +- Your current user's home directory is processed first
> +- Your directory from which spatch is called is processed next
> +- The directory provided with the --dir option is processed last, if used
>
>  Since coccicheck runs through make, it naturally runs from the kernel
>  proper dir, as such the second rule above would be implied for picking up a
> -.cocciconfig when using 'make coccicheck'.
> +.cocciconfig when using ``make coccicheck``.
>
> -'make coccicheck' also supports using M= targets.If you do not supply
> +``make coccicheck`` also supports using M= targets.If you do not supply
>  any M= target, it is assumed you want to target the entire kernel.
> -The kernel coccicheck script has:
> +The kernel coccicheck script has::
>
>      if [ "$KBUILD_EXTMOD" = "" ] ; then
>          OPTIONS="--dir $srctree $COCCIINCLUDE"
> @@ -235,12 +248,12 @@ override any of the kernel's .coccicheck's settings using SPFLAGS.
>
>  We help Coccinelle when used against Linux with a set of sensible defaults
>  options for Linux with our own Linux .cocciconfig. This hints to coccinelle
> -git can be used for 'git grep' queries over coccigrep. A timeout of 200
> +git can be used for ``git grep`` queries over coccigrep. A timeout of 200
>  seconds should suffice for now.
>
>  The options picked up by coccinelle when reading a .cocciconfig do not appear
>  as arguments to spatch processes running on your system, to confirm what
> -options will be used by Coccinelle run:
> +options will be used by Coccinelle run::
>
>        spatch --print-options-only
>
> @@ -252,219 +265,227 @@ carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
>  desired. See below section "Additional flags" for more details on how to use
>  idutils.
>
> - Additional flags
> -~~~~~~~~~~~~~~~~~~
> +Additional flags
> +----------------
>
>  Additional flags can be passed to spatch through the SPFLAGS
>  variable. This works as Coccinelle respects the last flags
> -given to it when options are in conflict.
> +given to it when options are in conflict. ::
>
>      make SPFLAGS=--use-glimpse coccicheck
>
>  Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
>  When no ID file is specified coccinelle assumes your ID database file
>  is in the file .id-utils.index on the top level of the kernel, coccinelle
> -carries a script scripts/idutils_index.sh which creates the database with
> +carries a script scripts/idutils_index.sh which creates the database with::
>
>      mkid -i C --output .id-utils.index
>
>  If you have another database filename you can also just symlink with this
> -name.
> +name. ::
>
>      make SPFLAGS=--use-idutils coccicheck
>
>  Alternatively you can specify the database filename explicitly, for
> -instance:
> +instance::
>
>      make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
>
> -See spatch --help to learn more about spatch options.
> +See ``spatch --help`` to learn more about spatch options.
>
> -Note that the '--use-glimpse' and '--use-idutils' options
> +Note that the ``--use-glimpse`` and ``--use-idutils`` options
>  require external tools for indexing the code. None of them is
>  thus active by default. However, by indexing the code with
>  one of these tools, and according to the cocci file used,
>  spatch could proceed the entire code base more quickly.
>
> - SmPL patch specific options
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +SmPL patch specific options
> +---------------------------
>
>  SmPL patches can have their own requirements for options passed
>  to Coccinelle. SmPL patch specific options can be provided by
> -providing them at the top of the SmPL patch, for instance:
> +providing them at the top of the SmPL patch, for instance::
>
> -// Options: --no-includes --include-headers
> +	// Options: --no-includes --include-headers
>
> - SmPL patch Coccinelle requirements
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +SmPL patch Coccinelle requirements
> +----------------------------------
>
>  As Coccinelle features get added some more advanced SmPL patches
>  may require newer versions of Coccinelle. If an SmPL patch requires
>  at least a version of Coccinelle, this can be specified as follows,
> -as an example if requiring at least Coccinelle >= 1.0.5:
> +as an example if requiring at least Coccinelle >= 1.0.5::
>
> -// Requires: 1.0.5
> +	// Requires: 1.0.5
>
> - Proposing new semantic patches
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Proposing new semantic patches
> +-------------------------------
>
>  New semantic patches can be proposed and submitted by kernel
>  developers. For sake of clarity, they should be organized in the
> -sub-directories of 'scripts/coccinelle/'.
> +sub-directories of ``scripts/coccinelle/``.
>
>
> - Detailed description of the 'report' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``report`` mode
> +-------------------------------------------
> +
> +``report`` generates a list in the following format::
>
> -'report' generates a list in the following format:
>    file:line:column-column: message
>
> -Example:
> +Example
> +~~~~~~~
>
> -Running
> +Running::
>
>  	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@r depends on !context && !patch && (org || report)@
> -expression x;
> -position p;
> -@@
> +   <smpl>
> +   @r depends on !context && !patch && (org || report)@
> +   expression x;
> +   position p;
> +   @@
>
> - ERR_PTR@p(PTR_ERR(x))
> +     ERR_PTR@p(PTR_ERR(x))
>
> -@script:python depends on report@
> -p << r.p;
> -x << r.x;
> -@@
> +   @script:python depends on report@
> +   p << r.p;
> +   x << r.x;
> +   @@
>
> -msg="ERR_CAST can be used with %s" % (x)
> -coccilib.report.print_report(p[0], msg)
> -</smpl>
> +   msg="ERR_CAST can be used with %s" % (x)
> +   coccilib.report.print_report(p[0], msg)
> +   </smpl>
>
>  This SmPL excerpt generates entries on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
> -/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
> -/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
> +    /home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
> +    /home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
> +    /home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
>
>
> - Detailed description of the 'patch' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``patch`` mode
> +------------------------------------------
>
> -When the 'patch' mode is available, it proposes a fix for each problem
> +When the ``patch`` mode is available, it proposes a fix for each problem
>  identified.
>
> -Example:
> +Example
> +~~~~~~~
> +
> +Running::
>
> -Running
>  	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@ depends on !context && patch && !org && !report @
> -expression x;
> -@@
> +    <smpl>
> +    @ depends on !context && patch && !org && !report @
> +    expression x;
> +    @@
>
> -- ERR_PTR(PTR_ERR(x))
> -+ ERR_CAST(x)
> -</smpl>
> +    - ERR_PTR(PTR_ERR(x))
> +    + ERR_CAST(x)
> +    </smpl>
>
>  This SmPL excerpt generates patch hunks on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -diff -u -p a/crypto/ctr.c b/crypto/ctr.c
> ---- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
> -+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
> -@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
> +    diff -u -p a/crypto/ctr.c b/crypto/ctr.c
> +    --- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
> +    +++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
> +    @@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
>   	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
>   				  CRYPTO_ALG_TYPE_MASK);
>   	if (IS_ERR(alg))
> --		return ERR_PTR(PTR_ERR(alg));
> -+		return ERR_CAST(alg);
> -
> +    -		return ERR_PTR(PTR_ERR(alg));
> +    +		return ERR_CAST(alg);
> +
>   	/* Block size must be >= 4 bytes. */
>   	err = -EINVAL;
>
> - Detailed description of the 'context' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``context`` mode
> +--------------------------------------------
>
> -'context' highlights lines of interest and their context
> +``context`` highlights lines of interest and their context
>  in a diff-like style.
>
> -NOTE: The diff-like output generated is NOT an applicable patch. The
> -      intent of the 'context' mode is to highlight the important lines
> -      (annotated with minus, '-') and gives some surrounding context
> +      **NOTE**: The diff-like output generated is NOT an applicable patch. The
> +      intent of the ``context`` mode is to highlight the important lines
> +      (annotated with minus, ``-``) and gives some surrounding context
>        lines around. This output can be used with the diff mode of
>        Emacs to review the code.
>
> -Example:
> +Example
> +~~~~~~~
> +
> +Running::
>
> -Running
>  	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@ depends on context && !patch && !org && !report@
> -expression x;
> -@@
> +    <smpl>
> +    @ depends on context && !patch && !org && !report@
> +    expression x;
> +    @@
>
> -* ERR_PTR(PTR_ERR(x))
> -</smpl>
> +    * ERR_PTR(PTR_ERR(x))
> +    </smpl>
>
>  This SmPL excerpt generates diff hunks on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
> ---- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
> -+++ /tmp/nothing
> -@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
> +    diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
> +    --- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
> +    +++ /tmp/nothing
> +    @@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
>   	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
>   				  CRYPTO_ALG_TYPE_MASK);
>   	if (IS_ERR(alg))
> --		return ERR_PTR(PTR_ERR(alg));
> -
> +    -		return ERR_PTR(PTR_ERR(alg));
> +
>   	/* Block size must be >= 4 bytes. */
>   	err = -EINVAL;
>
> - Detailed description of the 'org' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``org`` mode
> +----------------------------------------
> +
> +``org`` generates a report in the Org mode format of Emacs.
>
> -'org' generates a report in the Org mode format of Emacs.
> +Example
> +~~~~~~~
>
> -Example:
> +Running::
>
> -Running
>  	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@r depends on !context && !patch && (org || report)@
> -expression x;
> -position p;
> -@@
> +    <smpl>
> +    @r depends on !context && !patch && (org || report)@
> +    expression x;
> +    position p;
> +    @@
>
> - ERR_PTR@p(PTR_ERR(x))
> +      ERR_PTR@p(PTR_ERR(x))
>
> -@script:python depends on org@
> -p << r.p;
> -x << r.x;
> -@@
> +    @script:python depends on org@
> +    p << r.p;
> +    x << r.x;
> +    @@
>
> -msg="ERR_CAST can be used with %s" % (x)
> -msg_safe=msg.replace("[","@(").replace("]",")")
> -coccilib.org.print_todo(p[0], msg_safe)
> -</smpl>
> +    msg="ERR_CAST can be used with %s" % (x)
> +    msg_safe=msg.replace("[","@(").replace("]",")")
> +    coccilib.org.print_todo(p[0], msg_safe)
> +    </smpl>
>
>  This SmPL excerpt generates Org entries on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
> -* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
> -* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
> +    * TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
> +    * TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
> +    * TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
> diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
> index 60ddb9e..ae0c58c 100644
> --- a/Documentation/dev-tools/tools.rst
> +++ b/Documentation/dev-tools/tools.rst
> @@ -14,3 +14,4 @@ whole; patches welcome!
>  .. toctree::
>     :maxdepth: 2
>
> +   coccinelle
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 20bb1d0..1e5460c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3124,7 +3124,7 @@ L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
>  W:	http://coccinelle.lip6.fr/
>  S:	Supported
> -F:	Documentation/coccinelle.txt
> +F:	Documentation/dev-tools/coccinelle.rst
>  F:	scripts/coccinelle/
>  F:	scripts/coccicheck
>
> --
> 2.9.2
>
>

Re: [PATCH 09/10] docs: sphinxify kmemcheck.txt and move to dev-tools

[Vegard Nossum]

Hi,

On 9 August 2016 at 01:35, Jonathan Corbet <corbet@lwn.net> wrote:
> +The shadow bytemap dump legend is as follows:
> +
> +- i: initialized
> +- u: uninitialized
> +- a: unallocated (memory has been allocated by the slab layer, but has not
> +  yet been handed off to anybody)
> +- f: freed (memory has been allocated by the slab layer, but has been freed
> +  by the previous owner)

Maybe you want ``i``, ``u``, etc. here? The rest looks good to me. Thanks!

Although I'm not sure how relevant kmemcheck is anymore with KASAN
being able to do almost all (if not all) that kmemcheck does, and
better. Oh well, I thought the doc wasn't bad in any case ;-)


Vegard

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Christoph Hellwig]

The ugly format is a major regression over a proper simple text
file.  What's the point?

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Jani Nikula]

On Tue, 09 Aug 2016, Christoph Hellwig <hch@infradead.org> wrote:
> The ugly format is a major regression over a proper simple text
> file.  What's the point?

Major regression? Please be reasonable.

I think the changes are rather small, and it's a fair compromise between
a simple text file and one that can be used to generate pretty
documentation [1].

BR,
Jani.


[1] http://static.lwn.net/kerneldoc/dev-tools/sparse.html


-- 
Jani Nikula, Intel Open Source Technology Center

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Christoph Hellwig]

On Tue, Aug 09, 2016 at 11:19:50AM +0300, Jani Nikula wrote:
> On Tue, 09 Aug 2016, Christoph Hellwig <hch@infradead.org> wrote:
> > The ugly format is a major regression over a proper simple text
> > file.  What's the point?
> 
> Major regression? Please be reasonable.
> 
> I think the changes are rather small, and it's a fair compromise between
> a simple text file and one that can be used to generate pretty
> documentation [1].

It's a lot less pretty to read - it look like a cat threw up to be
specific.  The point of the Document is to read it quickly in the kernel
tree.  If you want fancy websites write a separate document.

> [1] http://static.lwn.net/kerneldoc/dev-tools/sparse.html

And I wouldn't exactly call that pretty.  There is no value add
over a simple text file here, and it requires a browser to not look
ugly instead of a text editor, which is a giant usablity regression.

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Daniel Vetter]

On Tue, Aug 9, 2016 at 10:22 AM, Christoph Hellwig <hch@infradead.org> wrote:
> On Tue, Aug 09, 2016 at 11:19:50AM +0300, Jani Nikula wrote:
>> On Tue, 09 Aug 2016, Christoph Hellwig <hch@infradead.org> wrote:
>> > The ugly format is a major regression over a proper simple text
>> > file.  What's the point?
>>
>> Major regression? Please be reasonable.
>>
>> I think the changes are rather small, and it's a fair compromise between
>> a simple text file and one that can be used to generate pretty
>> documentation [1].
>
> It's a lot less pretty to read - it look like a cat threw up to be
> specific.  The point of the Document is to read it quickly in the kernel
> tree.  If you want fancy websites write a separate document.
>
>> [1] http://static.lwn.net/kerneldoc/dev-tools/sparse.html
>
> And I wouldn't exactly call that pretty.  There is no value add
> over a simple text file here, and it requires a browser to not look
> ugly instead of a text editor, which is a giant usablity regression.

The point is to make the docs more discoverable by being able to
cross-link them. Old hats like us don't need that, but it definitely
has value in bringing new folks on board. And yes I want that, at
least for everything that's at least half-relevant to drm/gpu/i915
topics. And given that we just started on a large-scale effort to roll
out rcu in our driver (besides all the other bits we're using) that's
pretty much everything.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Christoph Hellwig]

On Tue, Aug 09, 2016 at 10:28:38AM +0200, Daniel Vetter wrote:
> The point is to make the docs more discoverable by being able to
> cross-link them. Old hats like us don't need that, but it definitely
> has value in bringing new folks on board.

But do that in a way that keeps the old hats happy.  The crazy use of
punctuation and the weird quotes is an absolute no-go.

Re: [PATCH 00/10] [RFC] Sphinxify and coalesce development-tool documents

[Jani Nikula]

On Tue, 09 Aug 2016, Jonathan Corbet <corbet@lwn.net> wrote:
> This series of patches collects a number of documents related to kernel
> development tools, converts them to the Sphinx format, and puts them
> together into the dev-tools directory.  The resulting formatted
> documentation can be seen at:
>
> 	http://static.lwn.net/kerneldoc/dev-tools/tools.html
>
> I've not made any textual changes, so this is far from having created a
> truly coherent document, but it is a step in the right direction and shows
> the sort of change I have in mind for the documentation directory in
> general.

FWIW, the whole series is wholeheartedly

Acked-by: Jani Nikula <jani.nikula@intel.com>


-- 
Jani Nikula, Intel Open Source Technology Center

Re: [PATCH 06/10] docs: sphinxify kasan.txt and move to dev-tools

[Alexander Potapenko]

On Tue, Aug 9, 2016 at 1:34 AM, Jonathan Corbet <corbet@lwn.net> wrote:
> No textual changes beyond formatting.
>
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Cc: Alexander Potapenko <glider@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Alexander Potapenko <glider@google.com>
> ---
>  Documentation/dev-tools/kasan.rst | 173 ++++++++++++++++++++++++++++++++++++++
>  Documentation/dev-tools/tools.rst |   1 +
>  Documentation/kasan.txt           | 171 -------------------------------------
>  MAINTAINERS                       |   2 +-
>  4 files changed, 175 insertions(+), 172 deletions(-)
>  create mode 100644 Documentation/dev-tools/kasan.rst
>  delete mode 100644 Documentation/kasan.txt
>
> diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
> new file mode 100644
> index 0000000..948d243
> --- /dev/null
> +++ b/Documentation/dev-tools/kasan.rst
> @@ -0,0 +1,173 @@
> +The Kernel Address Sanitizer (KASAN)
> +====================================
> +
> +Overview
> +--------
> +
> +KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
> +a fast and comprehensive solution for finding use-after-free and out-of-bounds
> +bugs.
> +
> +KASAN uses compile-time instrumentation for checking every memory access,
> +therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
> +required for detection of out-of-bounds accesses to stack or global variables.
> +
> +Currently KASAN is supported only for x86_64 architecture.
> +
> +Usage
> +-----
> +
> +To enable KASAN configure kernel with::
> +
> +         CONFIG_KASAN = y
> +
> +and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
> +inline are compiler instrumentation types. The former produces smaller binary
> +the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
> +version 5.0 or later.
> +
> +KASAN works with both SLUB and SLAB memory allocators.
> +For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
> +
> +To disable instrumentation for specific files or directories, add a line
> +similar to the following to the respective kernel Makefile:
> +
> +- For a single file (e.g. main.o)::
> +
> +    KASAN_SANITIZE_main.o := n
> +
> +- For all files in one directory::
> +
> +    KASAN_SANITIZE := n
> +
> +Error reports
> +~~~~~~~~~~~~~
> +
> +A typical out of bounds access report looks like this::
> +
> +    ==================================================================
> +    BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
> +    Write of size 1 by task modprobe/1689
> +    =============================================================================
> +    BUG kmalloc-128 (Not tainted): kasan error
> +    -----------------------------------------------------------------------------
> +
> +    Disabling lock debugging due to kernel taint
> +    INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
> +     __slab_alloc+0x4b4/0x4f0
> +     kmem_cache_alloc_trace+0x10b/0x190
> +     kmalloc_oob_right+0x3d/0x75 [test_kasan]
> +     init_module+0x9/0x47 [test_kasan]
> +     do_one_initcall+0x99/0x200
> +     load_module+0x2cb3/0x3b20
> +     SyS_finit_module+0x76/0x80
> +     system_call_fastpath+0x12/0x17
> +    INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
> +    INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
> +
> +    Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
> +    Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> +    Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
> +    Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
> +    Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
> +    CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
> +    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
> +     ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
> +     ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
> +     ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
> +    Call Trace:
> +     [<ffffffff81cc68ae>] dump_stack+0x46/0x58
> +     [<ffffffff811fd848>] print_trailer+0xf8/0x160
> +     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
> +     [<ffffffff811ff0f5>] object_err+0x35/0x40
> +     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
> +     [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
> +     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
> +     [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
> +     [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
> +     [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
> +     [<ffffffff8120a995>] __asan_store1+0x75/0xb0
> +     [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
> +     [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
> +     [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
> +     [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
> +     [<ffffffff810002d9>] do_one_initcall+0x99/0x200
> +     [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
> +     [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
> +     [<ffffffff8110fd70>] ? m_show+0x240/0x240
> +     [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
> +     [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
> +    Memory state around the buggy address:
> +     ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> +     ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
> +     ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> +     ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> +     ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
> +    >ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
> +                                                 ^
> +     ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> +     ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> +     ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
> +     ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> +     ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> +    ==================================================================
> +
> +The header of the report discribe what kind of bug happened and what kind of
> +access caused it. It's followed by the description of the accessed slub object
> +(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
> +the description of the accessed memory page.
> +
> +In the last section the report shows memory state around the accessed address.
> +Reading this part requires some understanding of how KASAN works.
> +
> +The state of each 8 aligned bytes of memory is encoded in one shadow byte.
> +Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
> +We use the following encoding for each shadow byte: 0 means that all 8 bytes
> +of the corresponding memory region are accessible; number N (1 <= N <= 7) means
> +that the first N bytes are accessible, and other (8 - N) bytes are not;
> +any negative value indicates that the entire 8-byte word is inaccessible.
> +We use different negative values to distinguish between different kinds of
> +inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
> +
> +In the report above the arrows point to the shadow byte 03, which means that
> +the accessed address is partially accessible.
> +
> +
> +Implementation details
> +----------------------
> +
> +From a high level, our approach to memory error detection is similar to that
> +of kmemcheck: use shadow memory to record whether each byte of memory is safe
> +to access, and use compile-time instrumentation to check shadow memory on each
> +memory access.
> +
> +AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
> +(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
> +offset to translate a memory address to its corresponding shadow address.
> +
> +Here is the function which translates an address to its corresponding shadow
> +address::
> +
> +    static inline void *kasan_mem_to_shadow(const void *addr)
> +    {
> +       return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
> +               + KASAN_SHADOW_OFFSET;
> +    }
> +
> +where ``KASAN_SHADOW_SCALE_SHIFT = 3``.
> +
> +Compile-time instrumentation used for checking memory accesses. Compiler inserts
> +function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
> +access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
> +valid or not by checking corresponding shadow memory.
> +
> +GCC 5.0 has possibility to perform inline instrumentation. Instead of making
> +function calls GCC directly inserts the code to check the shadow memory.
> +This option significantly enlarges kernel but it gives x1.1-x2 performance
> +boost over outline instrumented kernel.
> diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
> index 404d044..0500e65 100644
> --- a/Documentation/dev-tools/tools.rst
> +++ b/Documentation/dev-tools/tools.rst
> @@ -18,3 +18,4 @@ whole; patches welcome!
>     sparse
>     kcov
>     gcov
> +   kasan
> diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
> deleted file mode 100644
> index 7dd95b3..0000000
> --- a/Documentation/kasan.txt
> +++ /dev/null
> @@ -1,171 +0,0 @@
> -KernelAddressSanitizer (KASAN)
> -==============================
> -
> -0. Overview
> -===========
> -
> -KernelAddressSANitizer (KASAN) is a dynamic memory error detector. It provides
> -a fast and comprehensive solution for finding use-after-free and out-of-bounds
> -bugs.
> -
> -KASAN uses compile-time instrumentation for checking every memory access,
> -therefore you will need a GCC version 4.9.2 or later. GCC 5.0 or later is
> -required for detection of out-of-bounds accesses to stack or global variables.
> -
> -Currently KASAN is supported only for x86_64 architecture.
> -
> -1. Usage
> -========
> -
> -To enable KASAN configure kernel with:
> -
> -         CONFIG_KASAN = y
> -
> -and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline and
> -inline are compiler instrumentation types. The former produces smaller binary
> -the latter is 1.1 - 2 times faster. Inline instrumentation requires a GCC
> -version 5.0 or later.
> -
> -KASAN works with both SLUB and SLAB memory allocators.
> -For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
> -
> -To disable instrumentation for specific files or directories, add a line
> -similar to the following to the respective kernel Makefile:
> -
> -        For a single file (e.g. main.o):
> -                KASAN_SANITIZE_main.o := n
> -
> -        For all files in one directory:
> -                KASAN_SANITIZE := n
> -
> -1.1 Error reports
> -=================
> -
> -A typical out of bounds access report looks like this:
> -
> -==================================================================
> -BUG: AddressSanitizer: out of bounds access in kmalloc_oob_right+0x65/0x75 [test_kasan] at addr ffff8800693bc5d3
> -Write of size 1 by task modprobe/1689
> -=============================================================================
> -BUG kmalloc-128 (Not tainted): kasan error
> ------------------------------------------------------------------------------
> -
> -Disabling lock debugging due to kernel taint
> -INFO: Allocated in kmalloc_oob_right+0x3d/0x75 [test_kasan] age=0 cpu=0 pid=1689
> - __slab_alloc+0x4b4/0x4f0
> - kmem_cache_alloc_trace+0x10b/0x190
> - kmalloc_oob_right+0x3d/0x75 [test_kasan]
> - init_module+0x9/0x47 [test_kasan]
> - do_one_initcall+0x99/0x200
> - load_module+0x2cb3/0x3b20
> - SyS_finit_module+0x76/0x80
> - system_call_fastpath+0x12/0x17
> -INFO: Slab 0xffffea0001a4ef00 objects=17 used=7 fp=0xffff8800693bd728 flags=0x100000000004080
> -INFO: Object 0xffff8800693bc558 @offset=1368 fp=0xffff8800693bc720
> -
> -Bytes b4 ffff8800693bc548: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a  ........ZZZZZZZZ
> -Object ffff8800693bc558: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc568: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc5a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc5b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
> -Object ffff8800693bc5c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  kkkkkkkkkkkkkkk.
> -Redzone ffff8800693bc5d8: cc cc cc cc cc cc cc cc                          ........
> -Padding ffff8800693bc718: 5a 5a 5a 5a 5a 5a 5a 5a                          ZZZZZZZZ
> -CPU: 0 PID: 1689 Comm: modprobe Tainted: G    B          3.18.0-rc1-mm1+ #98
> -Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
> - ffff8800693bc000 0000000000000000 ffff8800693bc558 ffff88006923bb78
> - ffffffff81cc68ae 00000000000000f3 ffff88006d407600 ffff88006923bba8
> - ffffffff811fd848 ffff88006d407600 ffffea0001a4ef00 ffff8800693bc558
> -Call Trace:
> - [<ffffffff81cc68ae>] dump_stack+0x46/0x58
> - [<ffffffff811fd848>] print_trailer+0xf8/0x160
> - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
> - [<ffffffff811ff0f5>] object_err+0x35/0x40
> - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
> - [<ffffffff8120b9fa>] kasan_report_error+0x38a/0x3f0
> - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
> - [<ffffffff8120b344>] ? kasan_unpoison_shadow+0x14/0x40
> - [<ffffffff8120a79f>] ? kasan_poison_shadow+0x2f/0x40
> - [<ffffffffa00026a7>] ? kmem_cache_oob+0xc3/0xc3 [test_kasan]
> - [<ffffffff8120a995>] __asan_store1+0x75/0xb0
> - [<ffffffffa0002601>] ? kmem_cache_oob+0x1d/0xc3 [test_kasan]
> - [<ffffffffa0002065>] ? kmalloc_oob_right+0x65/0x75 [test_kasan]
> - [<ffffffffa0002065>] kmalloc_oob_right+0x65/0x75 [test_kasan]
> - [<ffffffffa00026b0>] init_module+0x9/0x47 [test_kasan]
> - [<ffffffff810002d9>] do_one_initcall+0x99/0x200
> - [<ffffffff811e4e5c>] ? __vunmap+0xec/0x160
> - [<ffffffff81114f63>] load_module+0x2cb3/0x3b20
> - [<ffffffff8110fd70>] ? m_show+0x240/0x240
> - [<ffffffff81115f06>] SyS_finit_module+0x76/0x80
> - [<ffffffff81cd3129>] system_call_fastpath+0x12/0x17
> -Memory state around the buggy address:
> - ffff8800693bc300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> - ffff8800693bc380: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 fc
> - ffff8800693bc400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> - ffff8800693bc480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> - ffff8800693bc500: fc fc fc fc fc fc fc fc fc fc fc 00 00 00 00 00
> ->ffff8800693bc580: 00 00 00 00 00 00 00 00 00 00 03 fc fc fc fc fc
> -                                                 ^
> - ffff8800693bc600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> - ffff8800693bc680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> - ffff8800693bc700: fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb fb
> - ffff8800693bc780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> - ffff8800693bc800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> -==================================================================
> -
> -The header of the report discribe what kind of bug happened and what kind of
> -access caused it. It's followed by the description of the accessed slub object
> -(see 'SLUB Debug output' section in Documentation/vm/slub.txt for details) and
> -the description of the accessed memory page.
> -
> -In the last section the report shows memory state around the accessed address.
> -Reading this part requires some understanding of how KASAN works.
> -
> -The state of each 8 aligned bytes of memory is encoded in one shadow byte.
> -Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
> -We use the following encoding for each shadow byte: 0 means that all 8 bytes
> -of the corresponding memory region are accessible; number N (1 <= N <= 7) means
> -that the first N bytes are accessible, and other (8 - N) bytes are not;
> -any negative value indicates that the entire 8-byte word is inaccessible.
> -We use different negative values to distinguish between different kinds of
> -inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
> -
> -In the report above the arrows point to the shadow byte 03, which means that
> -the accessed address is partially accessible.
> -
> -
> -2. Implementation details
> -=========================
> -
> -From a high level, our approach to memory error detection is similar to that
> -of kmemcheck: use shadow memory to record whether each byte of memory is safe
> -to access, and use compile-time instrumentation to check shadow memory on each
> -memory access.
> -
> -AddressSanitizer dedicates 1/8 of kernel memory to its shadow memory
> -(e.g. 16TB to cover 128TB on x86_64) and uses direct mapping with a scale and
> -offset to translate a memory address to its corresponding shadow address.
> -
> -Here is the function which translates an address to its corresponding shadow
> -address:
> -
> -static inline void *kasan_mem_to_shadow(const void *addr)
> -{
> -       return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
> -               + KASAN_SHADOW_OFFSET;
> -}
> -
> -where KASAN_SHADOW_SCALE_SHIFT = 3.
> -
> -Compile-time instrumentation used for checking memory accesses. Compiler inserts
> -function calls (__asan_load*(addr), __asan_store*(addr)) before each memory
> -access of size 1, 2, 4, 8 or 16. These functions check whether memory access is
> -valid or not by checking corresponding shadow memory.
> -
> -GCC 5.0 has possibility to perform inline instrumentation. Instead of making
> -function calls GCC directly inserts the code to check the shadow memory.
> -This option significantly enlarges kernel but it gives x1.1-x2 performance
> -boost over outline instrumented kernel.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bb53779..2ffd7ed 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6587,7 +6587,7 @@ L:        kasan-dev@googlegroups.com
>  S:     Maintained
>  F:     arch/*/include/asm/kasan.h
>  F:     arch/*/mm/kasan_init*
> -F:     Documentation/kasan.txt
> +F:     Documentation/dev-tools/kasan.rst
>  F:     include/linux/kasan*.h
>  F:     lib/test_kasan.c
>  F:     mm/kasan/
> --
> 2.9.2
>



-- 
Alexander Potapenko
Software Engineer

Google Germany GmbH
Erika-Mann-Straße, 33
80636 München

Geschäftsführer: Matthew Scott Sucherman, Paul Terence Manicle
Registergericht und -nummer: Hamburg, HRB 86891
Sitz der Gesellschaft: Hamburg

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Daniel Vetter]

On Tue, Aug 9, 2016 at 10:31 AM, Christoph Hellwig <hch@infradead.org> wrote:
> On Tue, Aug 09, 2016 at 10:28:38AM +0200, Daniel Vetter wrote:
>> The point is to make the docs more discoverable by being able to
>> cross-link them. Old hats like us don't need that, but it definitely
>> has value in bringing new folks on board.
>
> But do that in a way that keeps the old hats happy.  The crazy use of
> punctuation and the weird quotes is an absolute no-go.

We've been bikeshedding on the exact kind of light markup since over a
year now. Current one is rst, with pretty much uniform support among
the folks who cared that it's the least offensive of the bunch. I
think it can be made slightly less invasive by trading in a bit of the
noise in the sourc for warnings from the html generators (and less
pretty html output), but that's pretty close to nothing already.

The only other option with less markup is markdown, but the only
reason it's less invasive is that I can't really do anything at all.
Definitely no sensible way to pull in things like kernel-doc or the
uapi headers media needs.

Jon, can you please try to respin the patch with fewer changes, but
(probably) more rst warnings?
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH 02/10] docs: sphinxify coccinelle.txt and add it to dev-tools

[Nicolas Palix (LIG)]

[-- Attachment #1: Type: text/plain, Size: 25015 bytes --]

Le 09/08/16 à 01:34, Jonathan Corbet a écrit :
> No textual changes have been made, but the formatting has obviously been
> tweaked.
>
> Cc: Michal Marek <mmarek@suse.com>
> Cc: Gilles Muller <Gilles.Muller@lip6.fr>
> Cc: Nicolas Palix <nicolas.palix@imag.fr>
> Cc: Julia Lawall <julia.lawall@lip6.fr>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Acked-by: Nicolas Palix <nicolas.palix@imag.fr>

> ---
>  .../{coccinelle.txt => dev-tools/coccinelle.rst}   | 359 +++++++++++----------
>  Documentation/dev-tools/tools.rst                  |   1 +
>  MAINTAINERS                                        |   2 +-
>  3 files changed, 192 insertions(+), 170 deletions(-)
>  rename Documentation/{coccinelle.txt => dev-tools/coccinelle.rst} (56%)
>
> diff --git a/Documentation/coccinelle.txt b/Documentation/dev-tools/coccinelle.rst
> similarity index 56%
> rename from Documentation/coccinelle.txt
> rename to Documentation/dev-tools/coccinelle.rst
> index 01fb1da..4a64b4c 100644
> --- a/Documentation/coccinelle.txt
> +++ b/Documentation/dev-tools/coccinelle.rst
> @@ -1,10 +1,18 @@
> -Copyright 2010 Nicolas Palix <npalix@diku.dk>
> -Copyright 2010 Julia Lawall <julia@diku.dk>
> -Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
> +.. Copyright 2010 Nicolas Palix <npalix@diku.dk>
> +.. Copyright 2010 Julia Lawall <julia@diku.dk>
> +.. Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
>
> +.. highlight:: none
>
> - Getting Coccinelle
> -~~~~~~~~~~~~~~~~~~~~
> +Coccinelle
> +==========
> +
> +Coccinelle is a tool for pattern matching and text transformation that has
> +many uses in kernel development, including the application of complex,
> +tree-wide patches and detection of problematic programming patterns.
> +
> +Getting Coccinelle
> +-------------------
>
>  The semantic patches included in the kernel use features and options
>  which are provided by Coccinelle version 1.0.0-rc11 and above.
> @@ -22,24 +30,23 @@ of many distributions, e.g. :
>   - NetBSD
>   - FreeBSD
>
> -
>  You can get the latest version released from the Coccinelle homepage at
>  http://coccinelle.lip6.fr/
>
>  Information and tips about Coccinelle are also provided on the wiki
>  pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
>
> -Once you have it, run the following command:
> +Once you have it, run the following command::
>
>       	./configure
>          make
>
> -as a regular user, and install it with
> +as a regular user, and install it with::
>
>          sudo make install
>
> - Supplemental documentation
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Supplemental documentation
> +---------------------------
>
>  For supplemental documentation refer to the wiki:
>
> @@ -47,49 +54,52 @@ https://bottest.wiki.kernel.org/coccicheck
>
>  The wiki documentation always refers to the linux-next version of the script.
>
> - Using Coccinelle on the Linux kernel
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Using Coccinelle on the Linux kernel
> +------------------------------------
>
>  A Coccinelle-specific target is defined in the top level
> -Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
> -front-end in the 'scripts' directory.
> +Makefile. This target is named ``coccicheck`` and calls the ``coccicheck``
> +front-end in the ``scripts`` directory.
>
> -Four basic modes are defined: patch, report, context, and org. The mode to
> -use is specified by setting the MODE variable with 'MODE=<mode>'.
> +Four basic modes are defined: ``patch``, ``report``, ``context``, and
> +``org``. The mode to use is specified by setting the MODE variable with
> +``MODE=<mode>``.
>
> -'patch' proposes a fix, when possible.
> +- ``patch`` proposes a fix, when possible.
>
> -'report' generates a list in the following format:
> +- ``report`` generates a list in the following format:
>    file:line:column-column: message
>
> -'context' highlights lines of interest and their context in a
> -diff-like style.Lines of interest are indicated with '-'.
> +- ``context`` highlights lines of interest and their context in a
> +  diff-like style.Lines of interest are indicated with ``-``.
>
> -'org' generates a report in the Org mode format of Emacs.
> +- ``org`` generates a report in the Org mode format of Emacs.
>
>  Note that not all semantic patches implement all modes. For easy use
>  of Coccinelle, the default mode is "report".
>
>  Two other modes provide some common combinations of these modes.
>
> -'chain' tries the previous modes in the order above until one succeeds.
> +- ``chain`` tries the previous modes in the order above until one succeeds.
> +
> +- ``rep+ctxt`` runs successively the report mode and the context mode.
> +  It should be used with the C option (described later)
> +  which checks the code on a file basis.
>
> -'rep+ctxt' runs successively the report mode and the context mode.
> -	   It should be used with the C option (described later)
> -	   which checks the code on a file basis.
> +Examples
> +~~~~~~~~
>
> -Examples:
> -	To make a report for every semantic patch, run the following command:
> +To make a report for every semantic patch, run the following command::
>
>  		make coccicheck MODE=report
>
> -	To produce patches, run:
> +To produce patches, run::
>
>  		make coccicheck MODE=patch
>
>
>  The coccicheck target applies every semantic patch available in the
> -sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
> +sub-directories of ``scripts/coccinelle`` to the entire Linux kernel.
>
>  For each semantic patch, a commit message is proposed.  It gives a
>  description of the problem being checked by the semantic patch, and
> @@ -99,15 +109,15 @@ As any static code analyzer, Coccinelle produces false
>  positives. Thus, reports must be carefully checked, and patches
>  reviewed.
>
> -To enable verbose messages set the V= variable, for example:
> +To enable verbose messages set the V= variable, for example::
>
>     make coccicheck MODE=report V=1
>
> - Coccinelle parallelization
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Coccinelle parallelization
> +---------------------------
>
>  By default, coccicheck tries to run as parallel as possible. To change
> -the parallelism, set the J= variable. For example, to run across 4 CPUs:
> +the parallelism, set the J= variable. For example, to run across 4 CPUs::
>
>     make coccicheck MODE=report J=4
>
> @@ -115,44 +125,47 @@ As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
>  if support for this is detected you will benefit from parmap parallelization.
>
>  When parmap is enabled coccicheck will enable dynamic load balancing by using
> -'--chunksize 1' argument, this ensures we keep feeding threads with work
> +``--chunksize 1`` argument, this ensures we keep feeding threads with work
>  one by one, so that we avoid the situation where most work gets done by only
>  a few threads. With dynamic load balancing, if a thread finishes early we keep
>  feeding it more work.
>
>  When parmap is enabled, if an error occurs in Coccinelle, this error
> -value is propagated back, the return value of the 'make coccicheck'
> +value is propagated back, the return value of the ``make coccicheck``
>  captures this return value.
>
> - Using Coccinelle with a single semantic patch
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Using Coccinelle with a single semantic patch
> +---------------------------------------------
>
>  The optional make variable COCCI can be used to check a single
>  semantic patch. In that case, the variable must be initialized with
>  the name of the semantic patch to apply.
>
> -For instance:
> +For instance::
>
>  	make coccicheck COCCI=<my_SP.cocci> MODE=patch
> -or
> +
> +or::
> +
>  	make coccicheck COCCI=<my_SP.cocci> MODE=report
>
>
> - Controlling Which Files are Processed by Coccinelle
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Controlling Which Files are Processed by Coccinelle
> +---------------------------------------------------
> +
>  By default the entire kernel source tree is checked.
>
> -To apply Coccinelle to a specific directory, M= can be used.
> -For example, to check drivers/net/wireless/ one may write:
> +To apply Coccinelle to a specific directory, ``M=`` can be used.
> +For example, to check drivers/net/wireless/ one may write::
>
>      make coccicheck M=drivers/net/wireless/
>
>  To apply Coccinelle on a file basis, instead of a directory basis, the
> -following command may be used:
> +following command may be used::
>
>      make C=1 CHECK="scripts/coccicheck"
>
> -To check only newly edited code, use the value 2 for the C flag, i.e.
> +To check only newly edited code, use the value 2 for the C flag, i.e.::
>
>      make C=2 CHECK="scripts/coccicheck"
>
> @@ -166,8 +179,8 @@ semantic patch as shown in the previous section.
>  The "report" mode is the default. You can select another one with the
>  MODE variable explained above.
>
> - Debugging Coccinelle SmPL patches
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Debugging Coccinelle SmPL patches
> +---------------------------------
>
>  Using coccicheck is best as it provides in the spatch command line
>  include options matching the options used when we compile the kernel.
> @@ -177,8 +190,8 @@ manually run Coccinelle with debug options added.
>  Alternatively you can debug running Coccinelle against SmPL patches
>  by asking for stderr to be redirected to stderr, by default stderr
>  is redirected to /dev/null, if you'd like to capture stderr you
> -can specify the DEBUG_FILE="file.txt" option to coccicheck. For
> -instance:
> +can specify the ``DEBUG_FILE="file.txt"`` option to coccicheck. For
> +instance::
>
>      rm -f cocci.err
>      make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
> @@ -186,7 +199,7 @@ instance:
>
>  You can use SPFLAGS to add debugging flags, for instance you may want to
>  add both --profile --show-trying to SPFLAGS when debugging. For instance
> -you may want to use:
> +you may want to use::
>
>      rm -f err.log
>      export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
> @@ -198,24 +211,24 @@ work.
>
>  DEBUG_FILE support is only supported when using coccinelle >= 1.2.
>
> - .cocciconfig support
> -~~~~~~~~~~~~~~~~~~~~~~
> +.cocciconfig support
> +--------------------
>
>  Coccinelle supports reading .cocciconfig for default Coccinelle options that
>  should be used every time spatch is spawned, the order of precedence for
>  variables for .cocciconfig is as follows:
>
> -  o Your current user's home directory is processed first
> -  o Your directory from which spatch is called is processed next
> -  o The directory provided with the --dir option is processed last, if used
> +- Your current user's home directory is processed first
> +- Your directory from which spatch is called is processed next
> +- The directory provided with the --dir option is processed last, if used
>
>  Since coccicheck runs through make, it naturally runs from the kernel
>  proper dir, as such the second rule above would be implied for picking up a
> -.cocciconfig when using 'make coccicheck'.
> +.cocciconfig when using ``make coccicheck``.
>
> -'make coccicheck' also supports using M= targets.If you do not supply
> +``make coccicheck`` also supports using M= targets.If you do not supply
>  any M= target, it is assumed you want to target the entire kernel.
> -The kernel coccicheck script has:
> +The kernel coccicheck script has::
>
>      if [ "$KBUILD_EXTMOD" = "" ] ; then
>          OPTIONS="--dir $srctree $COCCIINCLUDE"
> @@ -235,12 +248,12 @@ override any of the kernel's .coccicheck's settings using SPFLAGS.
>
>  We help Coccinelle when used against Linux with a set of sensible defaults
>  options for Linux with our own Linux .cocciconfig. This hints to coccinelle
> -git can be used for 'git grep' queries over coccigrep. A timeout of 200
> +git can be used for ``git grep`` queries over coccigrep. A timeout of 200
>  seconds should suffice for now.
>
>  The options picked up by coccinelle when reading a .cocciconfig do not appear
>  as arguments to spatch processes running on your system, to confirm what
> -options will be used by Coccinelle run:
> +options will be used by Coccinelle run::
>
>        spatch --print-options-only
>
> @@ -252,219 +265,227 @@ carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
>  desired. See below section "Additional flags" for more details on how to use
>  idutils.
>
> - Additional flags
> -~~~~~~~~~~~~~~~~~~
> +Additional flags
> +----------------
>
>  Additional flags can be passed to spatch through the SPFLAGS
>  variable. This works as Coccinelle respects the last flags
> -given to it when options are in conflict.
> +given to it when options are in conflict. ::
>
>      make SPFLAGS=--use-glimpse coccicheck
>
>  Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
>  When no ID file is specified coccinelle assumes your ID database file
>  is in the file .id-utils.index on the top level of the kernel, coccinelle
> -carries a script scripts/idutils_index.sh which creates the database with
> +carries a script scripts/idutils_index.sh which creates the database with::
>
>      mkid -i C --output .id-utils.index
>
>  If you have another database filename you can also just symlink with this
> -name.
> +name. ::
>
>      make SPFLAGS=--use-idutils coccicheck
>
>  Alternatively you can specify the database filename explicitly, for
> -instance:
> +instance::
>
>      make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
>
> -See spatch --help to learn more about spatch options.
> +See ``spatch --help`` to learn more about spatch options.
>
> -Note that the '--use-glimpse' and '--use-idutils' options
> +Note that the ``--use-glimpse`` and ``--use-idutils`` options
>  require external tools for indexing the code. None of them is
>  thus active by default. However, by indexing the code with
>  one of these tools, and according to the cocci file used,
>  spatch could proceed the entire code base more quickly.
>
> - SmPL patch specific options
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +SmPL patch specific options
> +---------------------------
>
>  SmPL patches can have their own requirements for options passed
>  to Coccinelle. SmPL patch specific options can be provided by
> -providing them at the top of the SmPL patch, for instance:
> +providing them at the top of the SmPL patch, for instance::
>
> -// Options: --no-includes --include-headers
> +	// Options: --no-includes --include-headers
>
> - SmPL patch Coccinelle requirements
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +SmPL patch Coccinelle requirements
> +----------------------------------
>
>  As Coccinelle features get added some more advanced SmPL patches
>  may require newer versions of Coccinelle. If an SmPL patch requires
>  at least a version of Coccinelle, this can be specified as follows,
> -as an example if requiring at least Coccinelle >= 1.0.5:
> +as an example if requiring at least Coccinelle >= 1.0.5::
>
> -// Requires: 1.0.5
> +	// Requires: 1.0.5
>
> - Proposing new semantic patches
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Proposing new semantic patches
> +-------------------------------
>
>  New semantic patches can be proposed and submitted by kernel
>  developers. For sake of clarity, they should be organized in the
> -sub-directories of 'scripts/coccinelle/'.
> +sub-directories of ``scripts/coccinelle/``.
>
>
> - Detailed description of the 'report' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``report`` mode
> +-------------------------------------------
> +
> +``report`` generates a list in the following format::
>
> -'report' generates a list in the following format:
>    file:line:column-column: message
>
> -Example:
> +Example
> +~~~~~~~
>
> -Running
> +Running::
>
>  	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@r depends on !context && !patch && (org || report)@
> -expression x;
> -position p;
> -@@
> +   <smpl>
> +   @r depends on !context && !patch && (org || report)@
> +   expression x;
> +   position p;
> +   @@
>
> - ERR_PTR@p(PTR_ERR(x))
> +     ERR_PTR@p(PTR_ERR(x))
>
> -@script:python depends on report@
> -p << r.p;
> -x << r.x;
> -@@
> +   @script:python depends on report@
> +   p << r.p;
> +   x << r.x;
> +   @@
>
> -msg="ERR_CAST can be used with %s" % (x)
> -coccilib.report.print_report(p[0], msg)
> -</smpl>
> +   msg="ERR_CAST can be used with %s" % (x)
> +   coccilib.report.print_report(p[0], msg)
> +   </smpl>
>
>  This SmPL excerpt generates entries on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
> -/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
> -/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
> +    /home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
> +    /home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
> +    /home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
>
>
> - Detailed description of the 'patch' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``patch`` mode
> +------------------------------------------
>
> -When the 'patch' mode is available, it proposes a fix for each problem
> +When the ``patch`` mode is available, it proposes a fix for each problem
>  identified.
>
> -Example:
> +Example
> +~~~~~~~
> +
> +Running::
>
> -Running
>  	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@ depends on !context && patch && !org && !report @
> -expression x;
> -@@
> +    <smpl>
> +    @ depends on !context && patch && !org && !report @
> +    expression x;
> +    @@
>
> -- ERR_PTR(PTR_ERR(x))
> -+ ERR_CAST(x)
> -</smpl>
> +    - ERR_PTR(PTR_ERR(x))
> +    + ERR_CAST(x)
> +    </smpl>
>
>  This SmPL excerpt generates patch hunks on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -diff -u -p a/crypto/ctr.c b/crypto/ctr.c
> ---- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
> -+++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
> -@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
> +    diff -u -p a/crypto/ctr.c b/crypto/ctr.c
> +    --- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
> +    +++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
> +    @@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
>   	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
>   				  CRYPTO_ALG_TYPE_MASK);
>   	if (IS_ERR(alg))
> --		return ERR_PTR(PTR_ERR(alg));
> -+		return ERR_CAST(alg);
> -
> +    -		return ERR_PTR(PTR_ERR(alg));
> +    +		return ERR_CAST(alg);
> +
>   	/* Block size must be >= 4 bytes. */
>   	err = -EINVAL;
>
> - Detailed description of the 'context' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``context`` mode
> +--------------------------------------------
>
> -'context' highlights lines of interest and their context
> +``context`` highlights lines of interest and their context
>  in a diff-like style.
>
> -NOTE: The diff-like output generated is NOT an applicable patch. The
> -      intent of the 'context' mode is to highlight the important lines
> -      (annotated with minus, '-') and gives some surrounding context
> +      **NOTE**: The diff-like output generated is NOT an applicable patch. The
> +      intent of the ``context`` mode is to highlight the important lines
> +      (annotated with minus, ``-``) and gives some surrounding context
>        lines around. This output can be used with the diff mode of
>        Emacs to review the code.
>
> -Example:
> +Example
> +~~~~~~~
> +
> +Running::
>
> -Running
>  	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@ depends on context && !patch && !org && !report@
> -expression x;
> -@@
> +    <smpl>
> +    @ depends on context && !patch && !org && !report@
> +    expression x;
> +    @@
>
> -* ERR_PTR(PTR_ERR(x))
> -</smpl>
> +    * ERR_PTR(PTR_ERR(x))
> +    </smpl>
>
>  This SmPL excerpt generates diff hunks on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
> ---- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
> -+++ /tmp/nothing
> -@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
> +    diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
> +    --- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
> +    +++ /tmp/nothing
> +    @@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
>   	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
>   				  CRYPTO_ALG_TYPE_MASK);
>   	if (IS_ERR(alg))
> --		return ERR_PTR(PTR_ERR(alg));
> -
> +    -		return ERR_PTR(PTR_ERR(alg));
> +
>   	/* Block size must be >= 4 bytes. */
>   	err = -EINVAL;
>
> - Detailed description of the 'org' mode
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Detailed description of the ``org`` mode
> +----------------------------------------
> +
> +``org`` generates a report in the Org mode format of Emacs.
>
> -'org' generates a report in the Org mode format of Emacs.
> +Example
> +~~~~~~~
>
> -Example:
> +Running::
>
> -Running
>  	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
>
> -will execute the following part of the SmPL script.
> +will execute the following part of the SmPL script::
>
> -<smpl>
> -@r depends on !context && !patch && (org || report)@
> -expression x;
> -position p;
> -@@
> +    <smpl>
> +    @r depends on !context && !patch && (org || report)@
> +    expression x;
> +    position p;
> +    @@
>
> - ERR_PTR@p(PTR_ERR(x))
> +      ERR_PTR@p(PTR_ERR(x))
>
> -@script:python depends on org@
> -p << r.p;
> -x << r.x;
> -@@
> +    @script:python depends on org@
> +    p << r.p;
> +    x << r.x;
> +    @@
>
> -msg="ERR_CAST can be used with %s" % (x)
> -msg_safe=msg.replace("[","@(").replace("]",")")
> -coccilib.org.print_todo(p[0], msg_safe)
> -</smpl>
> +    msg="ERR_CAST can be used with %s" % (x)
> +    msg_safe=msg.replace("[","@(").replace("]",")")
> +    coccilib.org.print_todo(p[0], msg_safe)
> +    </smpl>
>
>  This SmPL excerpt generates Org entries on the standard output, as
> -illustrated below:
> +illustrated below::
>
> -* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
> -* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
> -* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
> +    * TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
> +    * TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
> +    * TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
> diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
> index 60ddb9e..ae0c58c 100644
> --- a/Documentation/dev-tools/tools.rst
> +++ b/Documentation/dev-tools/tools.rst
> @@ -14,3 +14,4 @@ whole; patches welcome!
>  .. toctree::
>     :maxdepth: 2
>
> +   coccinelle
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 20bb1d0..1e5460c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3124,7 +3124,7 @@ L:	cocci@systeme.lip6.fr (moderated for non-subscribers)
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
>  W:	http://coccinelle.lip6.fr/
>  S:	Supported
> -F:	Documentation/coccinelle.txt
> +F:	Documentation/dev-tools/coccinelle.rst
>  F:	scripts/coccinelle/
>  F:	scripts/coccicheck
>
>


-- 
Nicolas Palix
http://lig-membres.imag.fr/palix/


[-- Attachment #2: Signature cryptographique S/MIME --]
[-- Type: application/pkcs7-signature, Size: 2959 bytes --]

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Jonathan Corbet]

On Tue, 9 Aug 2016 01:31:06 -0700
Christoph Hellwig <hch@infradead.org> wrote:

> On Tue, Aug 09, 2016 at 10:28:38AM +0200, Daniel Vetter wrote:
> > The point is to make the docs more discoverable by being able to
> > cross-link them. Old hats like us don't need that, but it definitely
> > has value in bringing new folks on board.  
> 
> But do that in a way that keeps the old hats happy.  The crazy use of
> punctuation and the weird quotes is an absolute no-go.

As others have noted, the long-term goal is to turn our disorganized
documentation hairball into something more approachable, maintainable, and
integrated; this is a step in that direction.

I take it you object to the ``literal quotes`` which render in a monospace
font?  That's the bulk of the changes there.  I can certainly take them
out if you really think "__bitwise" looks better than ``__bitwise``; it
will adversely affect the resulting pages, but so be it.

jon

Re: [PATCH 10/10] docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools

[Jan Kiszka]

On 2016-08-09 01:35, Jonathan Corbet wrote:
> Cc: Jan Kiszka <jan.kiszka@siemens.com>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
> ---
>  .../gdb-kernel-debugging.rst}                      | 77 +++++++++++++---------
>  Documentation/dev-tools/tools.rst                  |  1 +
>  2 files changed, 46 insertions(+), 32 deletions(-)
>  rename Documentation/{gdb-kernel-debugging.txt => dev-tools/gdb-kernel-debugging.rst} (73%)
> 
> diff --git a/Documentation/gdb-kernel-debugging.txt b/Documentation/dev-tools/gdb-kernel-debugging.rst
> similarity index 73%
> rename from Documentation/gdb-kernel-debugging.txt
> rename to Documentation/dev-tools/gdb-kernel-debugging.rst
> index 7050ce8..5e93c9b 100644
> --- a/Documentation/gdb-kernel-debugging.txt
> +++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
> @@ -1,3 +1,5 @@
> +.. highlight:: none
> +
>  Debugging kernel and modules via gdb
>  ====================================
>  
> @@ -13,54 +15,58 @@ be transferred to the other gdb stubs as well.
>  Requirements
>  ------------
>  
> - o gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
> -   for distributions)
> +- gdb 7.2+ (recommended: 7.4+) with python support enabled (typically true
> +  for distributions)
>  
>  
>  Setup
>  -----
>  
> - o Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
> -   www.qemu.org for more details). For cross-development,
> -   http://landley.net/aboriginal/bin keeps a pool of machine images and
> -   toolchains that can be helpful to start from.
> +- Create a virtual Linux machine for QEMU/KVM (see www.linux-kvm.org and
> +  www.qemu.org for more details). For cross-development,
> +  http://landley.net/aboriginal/bin keeps a pool of machine images and
> +  toolchains that can be helpful to start from.
>  
> - o Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
> -   CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
> -   CONFIG_FRAME_POINTER, keep it enabled.
> +- Build the kernel with CONFIG_GDB_SCRIPTS enabled, but leave
> +  CONFIG_DEBUG_INFO_REDUCED off. If your architecture supports
> +  CONFIG_FRAME_POINTER, keep it enabled.
>  
> - o Install that kernel on the guest.
> +- Install that kernel on the guest.
> +  Alternatively, QEMU allows to boot the kernel directly using -kernel,
> +  -append, -initrd command line switches. This is generally only useful if
> +  you do not depend on modules. See QEMU documentation for more details on
> +  this mode.
>  
> -   Alternatively, QEMU allows to boot the kernel directly using -kernel,
> -   -append, -initrd command line switches. This is generally only useful if
> -   you do not depend on modules. See QEMU documentation for more details on
> -   this mode.
> +- Enable the gdb stub of QEMU/KVM, either
>  
> - o Enable the gdb stub of QEMU/KVM, either
>      - at VM startup time by appending "-s" to the QEMU command line
> -   or
> +
> +  or
> +
>      - during runtime by issuing "gdbserver" from the QEMU monitor
>        console
>  
> - o cd /path/to/linux-build
> +- cd /path/to/linux-build
>  
> - o Start gdb: gdb vmlinux
> +- Start gdb: gdb vmlinux
>  
> -   Note: Some distros may restrict auto-loading of gdb scripts to known safe
> -   directories. In case gdb reports to refuse loading vmlinux-gdb.py, add
> +  Note: Some distros may restrict auto-loading of gdb scripts to known safe
> +  directories. In case gdb reports to refuse loading vmlinux-gdb.py, add::
>  
>      add-auto-load-safe-path /path/to/linux-build
>  
> -   to ~/.gdbinit. See gdb help for more details.
> +  to ~/.gdbinit. See gdb help for more details.
> +
> +- Attach to the booted guest::
>  
> - o Attach to the booted guest:
>      (gdb) target remote :1234
>  
>  
>  Examples of using the Linux-provided gdb helpers
>  ------------------------------------------------
>  
> - o Load module (and main kernel) symbols:
> +- Load module (and main kernel) symbols::
> +
>      (gdb) lx-symbols
>      loading vmlinux
>      scanning for modules in /home/user/linux/build
> @@ -72,17 +78,20 @@ Examples of using the Linux-provided gdb helpers
>      ...
>      loading @0xffffffffa0000000: /home/user/linux/build/drivers/ata/ata_generic.ko
>  
> - o Set a breakpoint on some not yet loaded module function, e.g.:
> +- Set a breakpoint on some not yet loaded module function, e.g.::
> +
>      (gdb) b btrfs_init_sysfs
>      Function "btrfs_init_sysfs" not defined.
>      Make breakpoint pending on future shared library load? (y or [n]) y
>      Breakpoint 1 (btrfs_init_sysfs) pending.
>  
> - o Continue the target
> +- Continue the target::
> +
>      (gdb) c
>  
> - o Load the module on the target and watch the symbols being loaded as well as
> -   the breakpoint hit:
> +- Load the module on the target and watch the symbols being loaded as well as
> +  the breakpoint hit::
> +
>      loading @0xffffffffa0034000: /home/user/linux/build/lib/libcrc32c.ko
>      loading @0xffffffffa0050000: /home/user/linux/build/lib/lzo/lzo_compress.ko
>      loading @0xffffffffa006e000: /home/user/linux/build/lib/zlib_deflate/zlib_deflate.ko
> @@ -91,7 +100,8 @@ Examples of using the Linux-provided gdb helpers
>      Breakpoint 1, btrfs_init_sysfs () at /home/user/linux/fs/btrfs/sysfs.c:36
>      36              btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj);
>  
> - o Dump the log buffer of the target kernel:
> +- Dump the log buffer of the target kernel::
> +
>      (gdb) lx-dmesg
>      [     0.000000] Initializing cgroup subsys cpuset
>      [     0.000000] Initializing cgroup subsys cpu
> @@ -102,19 +112,22 @@ Examples of using the Linux-provided gdb helpers
>      [     0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>      ....
>  
> - o Examine fields of the current task struct:
> +- Examine fields of the current task struct::
> +
>      (gdb) p $lx_current().pid
>      $1 = 4998
>      (gdb) p $lx_current().comm
>      $2 = "modprobe\000\000\000\000\000\000\000"
>  
> - o Make use of the per-cpu function for the current or a specified CPU:
> +- Make use of the per-cpu function for the current or a specified CPU::
> +
>      (gdb) p $lx_per_cpu("runqueues").nr_running
>      $3 = 1
>      (gdb) p $lx_per_cpu("runqueues", 2).nr_running
>      $4 = 0
>  
> - o Dig into hrtimers using the container_of helper:
> +- Dig into hrtimers using the container_of helper::
> +
>      (gdb) set $next = $lx_per_cpu("hrtimer_bases").clock_base[0].active.next
>      (gdb) p *$container_of($next, "struct hrtimer", "node")
>      $5 = {
> @@ -144,7 +157,7 @@ List of commands and functions
>  ------------------------------
>  
>  The number of commands and convenience functions may evolve over the time,
> -this is just a snapshot of the initial version:
> +this is just a snapshot of the initial version::
>  
>   (gdb) apropos lx
>   function lx_current -- Return current task
> diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
> index 43f7dee..824ae8e 100644
> --- a/Documentation/dev-tools/tools.rst
> +++ b/Documentation/dev-tools/tools.rst
> @@ -22,3 +22,4 @@ whole; patches welcome!
>     ubsan
>     kmemleak
>     kmemcheck
> +   gdb-kernel-debugging
> 

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>

Looks nicer and less invasive than some of the markdown conversions.
Good to know.

Jan

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux

Re: [PATCH 08/10] docs: sphinxify kmemleak.txt and move it to dev-tools

[Catalin Marinas]

On Mon, Aug 08, 2016 at 05:35:00PM -0600, Jonathan Corbet wrote:
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
> ---
>  .../{kmemleak.txt => dev-tools/kmemleak.rst}       | 93 ++++++++++++----------
>  Documentation/dev-tools/tools.rst                  |  1 +
>  MAINTAINERS                                        |  2 +-
>  3 files changed, 52 insertions(+), 44 deletions(-)
>  rename Documentation/{kmemleak.txt => dev-tools/kmemleak.rst} (73%)

FWIW:

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Re: [PATCH 06/10] docs: sphinxify kasan.txt and move to dev-tools

[Andrey Ryabinin]

On 08/09/2016 02:34 AM, Jonathan Corbet wrote:
> No textual changes beyond formatting.
> 
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Cc: Alexander Potapenko <glider@google.com>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
> ---
>  Documentation/dev-tools/kasan.rst | 173 ++++++++++++++++++++++++++++++++++++++
>  Documentation/dev-tools/tools.rst |   1 +
>  Documentation/kasan.txt           | 171 -------------------------------------
>  MAINTAINERS                       |   2 +-
>  4 files changed, 175 insertions(+), 172 deletions(-)
>  create mode 100644 Documentation/dev-tools/kasan.rst
>  delete mode 100644 Documentation/kasan.txt
> 

Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>

Re: [PATCH 07/10] docs: sphinxify ubsan.txt and move it to dev-tools

[Andrey Ryabinin]

On 08/09/2016 02:34 AM, Jonathan Corbet wrote:
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
> ---

Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Jonathan Corbet]

On Tue, 9 Aug 2016 01:31:06 -0700
Christoph Hellwig <hch@infradead.org> wrote:

> On Tue, Aug 09, 2016 at 10:28:38AM +0200, Daniel Vetter wrote:
> > The point is to make the docs more discoverable by being able to
> > cross-link them. Old hats like us don't need that, but it definitely
> > has value in bringing new folks on board.  
> 
> But do that in a way that keeps the old hats happy.  The crazy use of
> punctuation and the weird quotes is an absolute no-go.

So would the old hats be happier with a patch that looks like this?  The
quality of the formatted output suffers slightly, but it's not a big
deal...

Thanks,

jon

>From d228af5bcb60fda50f8b3a100c0539c4994df040 Mon Sep 17 00:00:00 2001
From: Jonathan Corbet <corbet@lwn.net>
Date: Sun, 7 Aug 2016 15:09:14 -0600
Subject: [PATCH] docs: sphinxify sparse.txt and move to dev-tools

Fold the sparse document into the development tools set; no changes to the
text itself beyond formatting.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
---
 Documentation/{sparse.txt => dev-tools/sparse.rst} | 39 +++++++++++++---------
 Documentation/dev-tools/tools.rst                  |  1 +
 2 files changed, 25 insertions(+), 15 deletions(-)
 rename Documentation/{sparse.txt => dev-tools/sparse.rst} (82%)

diff --git a/Documentation/sparse.txt b/Documentation/dev-tools/sparse.rst
similarity index 82%
rename from Documentation/sparse.txt
rename to Documentation/dev-tools/sparse.rst
index eceab13..8c250e8 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/dev-tools/sparse.rst
@@ -1,11 +1,20 @@
-Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@ucw.cz>
-Copyright 2006 Bob Copeland <me@bobcopeland.com>
+.. Copyright 2004 Linus Torvalds
+.. Copyright 2004 Pavel Machek <pavel@ucw.cz>
+.. Copyright 2006 Bob Copeland <me@bobcopeland.com>
+
+Sparse
+======
+
+Sparse is a semantic checker for C programs; it can be used to find a
+number of potential problems with kernel code.  See
+https://lwn.net/Articles/689907/ for an overview of sparse; this document
+contains some kernel-specific sparse information.
+
 
 Using sparse for typechecking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------
 
-"__bitwise" is a type attribute, so you have to do something like this:
+"__bitwise" is a type attribute, so you have to do something like this::
 
         typedef int __bitwise pm_request_t;
 
@@ -20,13 +29,13 @@ but in this case we really _do_ want to force the conversion). And because
 the enum values are all the same type, now "enum pm_request" will be that
 type too.
 
-And with gcc, all the __bitwise/__force stuff goes away, and it all ends
-up looking just like integers to gcc.
+And with gcc, all the "__bitwise"/"__force stuff" goes away, and it all
+ends up looking just like integers to gcc.
 
 Quite frankly, you don't need the enum there. The above all really just
 boils down to one special "int __bitwise" type.
 
-So the simpler way is to just do
+So the simpler way is to just do::
 
         typedef int __bitwise pm_request_t;
 
@@ -50,7 +59,7 @@ __bitwise - noisy stuff; in particular, __le*/__be* are that.  We really
 don't want to drown in noise unless we'd explicitly asked for it.
 
 Using sparse for lock checking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+------------------------------
 
 The following macros are undefined for gcc and defined during a sparse
 run to use the "context" tracking feature of sparse, applied to
@@ -69,22 +78,22 @@ annotation is needed.  The tree annotations above are for cases where
 sparse would otherwise report a context imbalance.
 
 Getting sparse
-~~~~~~~~~~~~~~
+--------------
 
 You can get latest released versions from the Sparse homepage at
 https://sparse.wiki.kernel.org/index.php/Main_Page
 
 Alternatively, you can get snapshots of the latest development version
-of sparse using git to clone..
+of sparse using git to clone::
 
         git://git.kernel.org/pub/scm/devel/sparse/sparse.git
 
-DaveJ has hourly generated tarballs of the git tree available at..
+DaveJ has hourly generated tarballs of the git tree available at::
 
         http://www.codemonkey.org.uk/projects/git-snapshots/sparse/
 
 
-Once you have it, just do
+Once you have it, just do::
 
         make
         make install
@@ -92,7 +101,7 @@ Once you have it, just do
 as a regular user, and it will install sparse in your ~/bin directory.
 
 Using sparse
-~~~~~~~~~~~~
+------------
 
 Do a kernel make with "make C=1" to run sparse on all the C files that get
 recompiled, or use "make C=2" to run sparse on the files whether they need to
@@ -101,7 +110,7 @@ have already built it.
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.  To perform endianness
-checks, you may define __CHECK_ENDIAN__:
+checks, you may define __CHECK_ENDIAN__::
 
         make C=2 CF="-D__CHECK_ENDIAN__"
 
diff --git a/Documentation/dev-tools/tools.rst b/Documentation/dev-tools/tools.rst
index ae0c58c..d4bbda3 100644
--- a/Documentation/dev-tools/tools.rst
+++ b/Documentation/dev-tools/tools.rst
@@ -15,3 +15,4 @@ whole; patches welcome!
    :maxdepth: 2
 
    coccinelle
+   sparse
-- 
2.9.3

Re: [PATCH 03/10] docs: sphinxify sparse.txt and move to dev-tools

[Christoph Hellwig]

On Thu, Aug 18, 2016 at 05:46:30PM -0600, Jonathan Corbet wrote:
> So would the old hats be happier with a patch that looks like this?  The
> quality of the formatted output suffers slightly, but it's not a big
> deal...

I think this a major improvement.  The only thing that still strikes me
as rather odd are the "::" and ".." notations, but maybe I'll get used
to it..