From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Danny Milosavljevic <dannym@scratchpost.org>
Cc: Mark Brown <broonie@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
alsa-devel@alsa-project.org, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-sunxi@googlegroups.com
Subject: Re: [PATCH v9 1/2] ASoC: sun4i-codec: Distinguish sun4i from sun7i
Date: Wed, 31 Aug 2016 19:46:23 +0200 [thread overview]
Message-ID: <20160831174623.GA20462@lukather> (raw)
In-Reply-To: <20160830054403.7878-2-dannym@scratchpost.org>
[-- Attachment #1: Type: text/plain, Size: 4418 bytes --]
Hi Danny,
On Tue, Aug 30, 2016 at 07:44:02AM +0200, Danny Milosavljevic wrote:
> This distinguishes sun4i from sun7i. It is necessary because they use
> different registers for the audio mixer.
Your Signed-off-by is missing
> ---
> sound/soc/sunxi/sun4i-codec.c | 44 +++++++++++++++++++++++++++++++++----------
> 1 file changed, 34 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index 0e19c50..30f4ea2 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -96,8 +96,9 @@
> /* Other various ADC registers */
> #define SUN4I_CODEC_DAC_TXCNT (0x30)
> #define SUN4I_CODEC_ADC_RXCNT (0x34)
> -#define SUN4I_CODEC_AC_SYS_VERI (0x38)
> -#define SUN4I_CODEC_AC_MIC_PHONE_CAL (0x3c)
> +
> +#define SUN7I_CODEC_AC_DAC_CAL (0x38)
> +#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
That will need at least some mention in the commit log.
>
> struct sun4i_codec {
> struct device *dev;
> @@ -509,10 +510,17 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
>
> static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
>
> -static const struct snd_kcontrol_new sun4i_codec_widgets[] = {
> - SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
> - SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,
> - sun4i_codec_pa_volume_scale),
> +#define SUN4I_COMMON_CODEC_CONTROLS \
> + SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,\
> + SUN4I_CODEC_DAC_ACTL_PA_VOL, 0x3F, 0,\
> + sun4i_codec_pa_volume_scale)
> +
> +static const struct snd_kcontrol_new sun4i_codec_controls[] = {
> + SUN4I_COMMON_CODEC_CONTROLS,
> +};
> +
> +static const struct snd_kcontrol_new sun7i_codec_controls[] = {
> + SUN4I_COMMON_CODEC_CONTROLS,
> };
>
> static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
> @@ -629,8 +637,18 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
>
> static struct snd_soc_codec_driver sun4i_codec_codec = {
> .component_driver = {
> - .controls = sun4i_codec_widgets,
> - .num_controls = ARRAY_SIZE(sun4i_codec_widgets),
> + .controls = sun4i_codec_controls,
> + .num_controls = ARRAY_SIZE(sun4i_codec_controls),
> + .dapm_widgets = sun4i_codec_codec_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
> + .dapm_routes = sun4i_codec_codec_dapm_routes,
> + .num_dapm_routes = ARRAY_SIZE(sun4i_codec_codec_dapm_routes),
> + },
> +};
You need a new line here.
> +static struct snd_soc_codec_driver sun7i_codec_codec = {
> + .component_driver = {
> + .controls = sun7i_codec_controls,
> + .num_controls = ARRAY_SIZE(sun7i_codec_controls),
> .dapm_widgets = sun4i_codec_codec_dapm_widgets,
> .num_dapm_widgets = ARRAY_SIZE(sun4i_codec_codec_dapm_widgets),
> .dapm_routes = sun4i_codec_codec_dapm_routes,
> @@ -682,7 +700,7 @@ static const struct regmap_config sun4i_codec_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> .val_bits = 32,
> - .max_register = SUN4I_CODEC_AC_MIC_PHONE_CAL,
> + .max_register = SUN7I_CODEC_AC_MIC_PHONE_CAL,
> };
>
> static const struct of_device_id sun4i_codec_of_match[] = {
> @@ -760,6 +778,7 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> {
> struct snd_soc_card *card;
> struct sun4i_codec *scodec;
> + struct snd_soc_codec_driver *codec;
> struct resource *res;
> void __iomem *base;
> int ret;
> @@ -822,7 +841,12 @@ static int sun4i_codec_probe(struct platform_device *pdev)
> scodec->capture_dma_data.maxburst = 4;
> scodec->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
>
> - ret = snd_soc_register_codec(&pdev->dev, &sun4i_codec_codec,
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun7i-a20-codec"))
> + codec = &sun7i_codec_codec;
> + else
> + codec = &sun4i_codec_codec;
It would be better to add a structure assiocated to the data field of
of_device_id. That way, you'll also be able to have any quirks without
adding more checks (such as a different regmap config, like Chen-Yu
suggested).
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-08-31 17:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 5:44 [PATCH v9 0/2] sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2016-08-30 5:44 ` [PATCH v9 1/2] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-08-31 3:22 ` Chen-Yu Tsai
2016-08-31 17:46 ` Maxime Ripard [this message]
2016-08-31 20:14 ` [linux-sunxi] " Danny Milosavljevic
2016-09-01 16:45 ` Maxime Ripard
2016-08-30 5:44 ` [PATCH v9 2/2] Add mixer controls: Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2016-08-31 6:24 ` Chen-Yu Tsai
2016-08-31 7:17 ` Danny Milosavljevic
2016-08-31 7:46 ` Chen-Yu Tsai
2016-08-31 7:40 ` [linux-sunxi] " Danny Milosavljevic
2016-08-31 7:43 ` Chen-Yu Tsai
2016-08-31 7:49 ` Danny Milosavljevic
2016-08-31 7:55 ` Chen-Yu Tsai
2016-09-01 10:56 ` Danny Milosavljevic
2016-09-01 13:25 ` [linux-sunxi] " Chen-Yu Tsai
-- strict thread matches above, loose matches on Subject: below --
2016-08-29 18:03 [PATCH v9 0/2] sun4i-codec: Add " Danny Milosavljevic
2016-08-29 18:03 ` [PATCH v9 1/2] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-08-26 7:22 [PATCH v9 0/2] sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2016-08-26 7:22 ` [PATCH v9 1/2] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-08-26 6:53 [PATCH v9 0/2] sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2016-08-26 6:53 ` [PATCH v9 1/2] ASoC: sun4i-codec: Distinguish sun4i from sun7i Danny Milosavljevic
2016-08-26 7:04 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160831174623.GA20462@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dannym@scratchpost.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).