* [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's
@ 2016-11-01 23:51 Joshua Clayton
2016-11-04 20:48 ` Fabio Estevam
2016-11-05 11:47 ` Shawn Guo
0 siblings, 2 replies; 3+ messages in thread
From: Joshua Clayton @ 2016-11-01 23:51 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer, Fabio Estevam, Rob Herring,
Mark Rutland, Russell King,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Cc: Joshua Clayton
imx-weim should always set address-cells to 2,
and size_cells to 1.
On imx6, fsl,weim-cs-gpr will always be &gpr
Set these common parameters in the dtsi file,
rather than in a downstream dts.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
arch/arm/boot/dts/imx6q-evi.dts | 3 ---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 --
arch/arm/boot/dts/imx6qdl.dtsi | 3 +++
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
arch/arm/boot/dts/imx6sx.dtsi | 3 +++
5 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index bd0b85c..a88cbd8 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -241,10 +241,7 @@
};
&weim {
- #address-cells = <2>;
- #size-cells = <1>;
ranges = <0 0 0x08000000 0x08000000>;
- fsl,weim-cs-gpr = <&gpr>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 8006467..52390ba 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -613,8 +613,6 @@
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
- #address-cells = <2>;
- #size-cells = <1>;
ranges = <0 0 0x08000000 0x08000000>;
status = "disabled"; /* pin conflict with SPI NOR */
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 1bbd36f..d7bed1f 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1092,10 +1092,13 @@
};
weim: weim@021b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
compatible = "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+ fsl,weim-cs-gpr = <&gpr>;
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 02378db..c2b28c0 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -893,8 +893,11 @@
};
weim: weim@021b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,weim-cs-gpr = <&gpr>;
};
ocotp: ocotp@021bc000 {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 9526c38..78eb023 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -968,10 +968,13 @@
};
weim: weim@021b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+ fsl,weim-cs-gpr = <&gpr>;
};
ocotp: ocotp@021bc000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's
2016-11-01 23:51 [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's Joshua Clayton
@ 2016-11-04 20:48 ` Fabio Estevam
2016-11-05 11:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2016-11-04 20:48 UTC (permalink / raw)
To: Joshua Clayton
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, Rob Herring,
Mark Rutland, Russell King,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue, Nov 1, 2016 at 9:51 PM, Joshua Clayton <stillcompiling@gmail.com> wrote:
> imx-weim should always set address-cells to 2,
> and size_cells to 1.
> On imx6, fsl,weim-cs-gpr will always be &gpr
>
> Set these common parameters in the dtsi file,
> rather than in a downstream dts.
>
> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's
2016-11-01 23:51 [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's Joshua Clayton
2016-11-04 20:48 ` Fabio Estevam
@ 2016-11-05 11:47 ` Shawn Guo
1 sibling, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2016-11-05 11:47 UTC (permalink / raw)
To: Joshua Clayton
Cc: Sascha Hauer, Fabio Estevam, Rob Herring, Mark Rutland,
Russell King,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue, Nov 01, 2016 at 04:51:45PM -0700, Joshua Clayton wrote:
> imx-weim should always set address-cells to 2,
> and size_cells to 1.
> On imx6, fsl,weim-cs-gpr will always be &gpr
>
> Set these common parameters in the dtsi file,
> rather than in a downstream dts.
>
> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-11-05 11:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-01 23:51 [PATCH] ARM: dts: imx6: Add imx-weim parameters to dtsi's Joshua Clayton
2016-11-04 20:48 ` Fabio Estevam
2016-11-05 11:47 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).