[mm PATCH v2 00/26] Add support for DMA writable pages being writable by the network stack

[mm PATCH v2 00/26] Add support for DMA writable pages being writable by the network stack

[Alexander Duyck]

The first 22 patches in the set add support for the DMA attribute
DMA_ATTR_SKIP_CPU_SYNC on multiple platforms/architectures.  This is needed
so that we can flag the calls to dma_map/unmap_page so that we do not
invalidate cache lines that do not currently belong to the device.  Instead
we have to take care of this in the driver via a call to
sync_single_range_for_cpu prior to freeing the Rx page.

Patch 23 adds support for dma_map_page_attrs and dma_unmap_page_attrs so
that we can unmap and map a page using the DMA_ATTR_SKIP_CPU_SYNC
attribute.

Patch 24 adds support for freeing a page that has multiple references being
held by a single caller.  This way we can free page fragments that were
allocated by a given driver.

The last 2 patches use these updates in the igb driver, and lay the
groundwork to allow for us to reimpelement the use of build_skb.

v1: Split out changes DMA_ERROR_CODE fix for swiotlb-xen
    Minor fixes based on issues found by kernel build bot
    Few minor changes for issues found on code review
    Added Acked-by for patches that were acked and not changed

v2: Added a few more Acked-by
    Added swiotlb_unmap_sg to functions dropped in patch 1, dropped Acked-by
    Submitting patches to mm instead of net-next

---

Alexander Duyck (26):
      swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg
      swiotlb-xen: Enforce return of DMA_ERROR_CODE in mapping function
      swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC
      arch/arc: Add option to skip sync on DMA mapping
      arch/arm: Add option to skip sync on DMA map and unmap
      arch/avr32: Add option to skip sync on DMA map
      arch/blackfin: Add option to skip sync on DMA map
      arch/c6x: Add option to skip sync on DMA map and unmap
      arch/frv: Add option to skip sync on DMA map
      arch/hexagon: Add option to skip DMA sync as a part of mapping
      arch/m68k: Add option to skip DMA sync as a part of mapping
      arch/metag: Add option to skip DMA sync as a part of map and unmap
      arch/microblaze: Add option to skip DMA sync as a part of map and unmap
      arch/mips: Add option to skip DMA sync as a part of map and unmap
      arch/nios2: Add option to skip DMA sync as a part of map and unmap
      arch/openrisc: Add option to skip DMA sync as a part of mapping
      arch/parisc: Add option to skip DMA sync as a part of map and unmap
      arch/powerpc: Add option to skip DMA sync as a part of mapping
      arch/sh: Add option to skip DMA sync as a part of mapping
      arch/sparc: Add option to skip DMA sync as a part of map and unmap
      arch/tile: Add option to skip DMA sync as a part of map and unmap
      arch/xtensa: Add option to skip DMA sync as a part of mapping
      dma: Add calls for dma_map_page_attrs and dma_unmap_page_attrs
      mm: Add support for releasing multiple instances of a page
      igb: Update driver to make use of DMA_ATTR_SKIP_CPU_SYNC
      igb: Update code to better handle incrementing page count


 arch/arc/mm/dma.c                         |    5 ++
 arch/arm/common/dmabounce.c               |   16 ++++--
 arch/arm/xen/mm.c                         |    1 
 arch/avr32/mm/dma-coherent.c              |    7 ++-
 arch/blackfin/kernel/dma-mapping.c        |    8 +++
 arch/c6x/kernel/dma.c                     |   14 ++++-
 arch/frv/mb93090-mb00/pci-dma-nommu.c     |   14 ++++-
 arch/frv/mb93090-mb00/pci-dma.c           |    9 +++
 arch/hexagon/kernel/dma.c                 |    6 ++
 arch/m68k/kernel/dma.c                    |    8 +++
 arch/metag/kernel/dma.c                   |   16 +++++-
 arch/microblaze/kernel/dma.c              |   10 +++-
 arch/mips/loongson64/common/dma-swiotlb.c |    2 -
 arch/mips/mm/dma-default.c                |    8 ++-
 arch/nios2/mm/dma-mapping.c               |   26 +++++++---
 arch/openrisc/kernel/dma.c                |    3 +
 arch/parisc/kernel/pci-dma.c              |   20 ++++++--
 arch/powerpc/kernel/dma.c                 |    9 +++
 arch/sh/kernel/dma-nommu.c                |    7 ++-
 arch/sparc/kernel/iommu.c                 |    4 +-
 arch/sparc/kernel/ioport.c                |    4 +-
 arch/tile/kernel/pci-dma.c                |   12 ++++-
 arch/x86/xen/pci-swiotlb-xen.c            |    1 
 arch/xtensa/kernel/pci-dma.c              |    7 ++-
 drivers/net/ethernet/intel/igb/igb.h      |    7 ++-
 drivers/net/ethernet/intel/igb/igb_main.c |   77 +++++++++++++++++++----------
 drivers/xen/swiotlb-xen.c                 |   27 +++++-----
 include/linux/dma-mapping.h               |   20 +++++---
 include/linux/gfp.h                       |    2 +
 include/linux/swiotlb.h                   |   14 ++---
 include/xen/swiotlb-xen.h                 |    3 -
 lib/swiotlb.c                             |   64 +++++++++++-------------
 mm/page_alloc.c                           |   14 +++++
 33 files changed, 291 insertions(+), 154 deletions(-)

--

[mm PATCH v2 01/26] swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg

[Alexander Duyck]

There are no users for swiotlb_map_sg or swiotlb_unmap_sg so we might as
well just drop them.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---

v2: Added swiotlb_unmap_sg to functions dropped.

 include/linux/swiotlb.h |    8 --------
 lib/swiotlb.c           |   16 ----------------
 2 files changed, 24 deletions(-)

diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index 5f81f8a..f0d2589 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -73,14 +73,6 @@ extern void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 			       unsigned long attrs);
 
 extern int
-swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction dir);
-
-extern void
-swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-		 enum dma_data_direction dir);
-
-extern int
 swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
 		     enum dma_data_direction dir,
 		     unsigned long attrs);
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 22e13a0..5005316 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -910,14 +910,6 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 }
 EXPORT_SYMBOL(swiotlb_map_sg_attrs);
 
-int
-swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-	       enum dma_data_direction dir)
-{
-	return swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, 0);
-}
-EXPORT_SYMBOL(swiotlb_map_sg);
-
 /*
  * Unmap a set of streaming mode DMA translations.  Again, cpu read rules
  * concerning calls here are the same as for swiotlb_unmap_page() above.
@@ -938,14 +930,6 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 }
 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
 
-void
-swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
-		 enum dma_data_direction dir)
-{
-	return swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, 0);
-}
-EXPORT_SYMBOL(swiotlb_unmap_sg);
-
 /*
  * Make physical memory consistent for a set of streaming mode DMA translations
  * after a transfer.

Re: [mm PATCH v2 01/26] swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg

[Christoph Hellwig]

On Wed, Nov 02, 2016 at 07:12:31AM -0400, Alexander Duyck wrote:
> There are no users for swiotlb_map_sg or swiotlb_unmap_sg so we might as
> well just drop them.

FYI, I sent the same patch already on Sep, 11 and Konrad already ACKed
it:

https://lkml.org/lkml/2016/9/11/112
https://lkml.org/lkml/2016/9/16/474

Re: [mm PATCH v2 01/26] swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg

[Konrad Rzeszutek Wilk]

On Thu, Nov 03, 2016 at 07:14:46AM -0700, Christoph Hellwig wrote:
> On Wed, Nov 02, 2016 at 07:12:31AM -0400, Alexander Duyck wrote:
> > There are no users for swiotlb_map_sg or swiotlb_unmap_sg so we might as
> > well just drop them.
> 
> FYI, I sent the same patch already on Sep, 11 and Konrad already ACKed
> it:
> 
> https://lkml.org/lkml/2016/9/11/112
> https://lkml.org/lkml/2016/9/16/474

Somehow I thought you wanted to put them through your tree (which
is why I acked them).

I can take them and also the first couple of Alexander through
my tree. Or if it makes it simpler - they can go through the -mm tree?

Re: [mm PATCH v2 01/26] swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg

[Christoph Hellwig]

On Thu, Nov 03, 2016 at 10:29:52AM -0400, Konrad Rzeszutek Wilk wrote:
> Somehow I thought you wanted to put them through your tree (which
> is why I acked them).
> 
> I can take them and also the first couple of Alexander through
> my tree. Or if it makes it simpler - they can go through the -mm tree?

I don't have a tree for it, so I kinda expected you to pick it up.
But I'm also fine with you just Acking the version from Alex and having
him funnel it through whatever tree he wants to get his patches in
through.

RE: [mm PATCH v2 01/26] swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg

[Duyck, Alexander H]

> -----Original Message-----
> From: Christoph Hellwig [mailto:hch@infradead.org]
> Sent: Thursday, November 3, 2016 7:46 AM
> To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> Cc: Christoph Hellwig <hch@infradead.org>; Duyck, Alexander H
> <alexander.h.duyck@intel.com>; linux-mm@kvack.org; akpm@linux-
> foundation.org; netdev@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [mm PATCH v2 01/26] swiotlb: Drop unused functions
> swiotlb_map_sg and swiotlb_unmap_sg
> 
> On Thu, Nov 03, 2016 at 10:29:52AM -0400, Konrad Rzeszutek Wilk wrote:
> > Somehow I thought you wanted to put them through your tree (which is
> > why I acked them).
> >
> > I can take them and also the first couple of Alexander through my
> > tree. Or if it makes it simpler - they can go through the -mm tree?
> 
> I don't have a tree for it, so I kinda expected you to pick it up.
> But I'm also fine with you just Acking the version from Alex and having him
> funnel it through whatever tree he wants to get his patches in through.

For the first 3 patches in my series I am fine with them being pulled into the swiotlb tree.  So if you want to pull Christoph's two patches, and then drop my duplicate patch and instead pull the next 2 I could submit a v3 of my series without the swiotlb patches in it.

At this point I have redone my series so that I technically don't have anything with a hard dependency on the DMA_ATTR_SKIP_CPU_SYNC actually doing anything yet.  My plan is to get this all into Linus's tree first via whatever tree I can get these patches pulled into and once I have all that I will start updating drivers in net-next.

Thanks.

- Alex

[mm PATCH v2 02/26] swiotlb-xen: Enforce return of DMA_ERROR_CODE in mapping function

[Alexander Duyck]

The mapping function should always return DMA_ERROR_CODE when a mapping has
failed as this is what the DMA API expects when a DMA error has occurred.
The current function for mapping a page in Xen was returning either
DMA_ERROR_CODE or 0 depending on where it failed.

On x86 DMA_ERROR_CODE is 0, but on other architectures such as ARM it is
~0. We need to make sure we return the same error value if either the
mapping failed or the device is not capable of accessing the mapping.

If we are returning DMA_ERROR_CODE as our error value we can drop the
function for checking the error code as the default is to compare the
return value against DMA_ERROR_CODE if no function is defined.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---

v1: Added this patch which was part of an earlier patch.

 arch/arm/xen/mm.c              |    1 -
 arch/x86/xen/pci-swiotlb-xen.c |    1 -
 drivers/xen/swiotlb-xen.c      |   18 ++++++------------
 include/xen/swiotlb-xen.h      |    3 ---
 4 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index d062f08..bd62d94 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -186,7 +186,6 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
 EXPORT_SYMBOL(xen_dma_ops);
 
 static struct dma_map_ops xen_swiotlb_dma_ops = {
-	.mapping_error = xen_swiotlb_dma_mapping_error,
 	.alloc = xen_swiotlb_alloc_coherent,
 	.free = xen_swiotlb_free_coherent,
 	.sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu,
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index 0e98e5d..a9fafb5 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -19,7 +19,6 @@
 int xen_swiotlb __read_mostly;
 
 static struct dma_map_ops xen_swiotlb_dma_ops = {
-	.mapping_error = xen_swiotlb_dma_mapping_error,
 	.alloc = xen_swiotlb_alloc_coherent,
 	.free = xen_swiotlb_free_coherent,
 	.sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu,
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 87e6035..b8014bf 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -416,11 +416,12 @@ dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	/*
 	 * Ensure that the address returned is DMA'ble
 	 */
-	if (!dma_capable(dev, dev_addr, size)) {
-		swiotlb_tbl_unmap_single(dev, map, size, dir);
-		dev_addr = 0;
-	}
-	return dev_addr;
+	if (dma_capable(dev, dev_addr, size))
+		return dev_addr;
+
+	swiotlb_tbl_unmap_single(dev, map, size, dir);
+
+	return DMA_ERROR_CODE;
 }
 EXPORT_SYMBOL_GPL(xen_swiotlb_map_page);
 
@@ -648,13 +649,6 @@ void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 }
 EXPORT_SYMBOL_GPL(xen_swiotlb_sync_sg_for_device);
 
-int
-xen_swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
-{
-	return !dma_addr;
-}
-EXPORT_SYMBOL_GPL(xen_swiotlb_dma_mapping_error);
-
 /*
  * Return whether the given device DMA address mask can be supported
  * properly.  For example, if your device can only drive the low 24-bits
diff --git a/include/xen/swiotlb-xen.h b/include/xen/swiotlb-xen.h
index 7c35e27..a0083be 100644
--- a/include/xen/swiotlb-xen.h
+++ b/include/xen/swiotlb-xen.h
@@ -51,9 +51,6 @@ extern void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 			       int nelems, enum dma_data_direction dir);
 
 extern int
-xen_swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
-
-extern int
 xen_swiotlb_dma_supported(struct device *hwdev, u64 mask);
 
 extern int

[mm PATCH v2 03/26] swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC

[Alexander Duyck]

As a first step to making DMA_ATTR_SKIP_CPU_SYNC apply to architectures
beyond just ARM I need to make it so that the swiotlb will respect the
flag.  In order to do that I also need to update the swiotlb-xen since it
heavily makes use of the functionality.

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---

v1: Found different fix for avoiding lines longer than 80 characters
    Dropped code that moved section to a label at end of function.
    Split out mapping error fix to separate patch.

 drivers/xen/swiotlb-xen.c |   11 +++++++---
 include/linux/swiotlb.h   |    6 ++++--
 lib/swiotlb.c             |   48 +++++++++++++++++++++++++++------------------
 3 files changed, 40 insertions(+), 25 deletions(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index b8014bf..3d048af 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -405,7 +405,8 @@ dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
-	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir);
+	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir,
+				     attrs);
 	if (map == SWIOTLB_MAP_ERROR)
 		return DMA_ERROR_CODE;
 
@@ -419,7 +420,8 @@ dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	if (dma_capable(dev, dev_addr, size))
 		return dev_addr;
 
-	swiotlb_tbl_unmap_single(dev, map, size, dir);
+	swiotlb_tbl_unmap_single(dev, map, size, dir,
+				 attrs | DMA_ATTR_SKIP_CPU_SYNC);
 
 	return DMA_ERROR_CODE;
 }
@@ -445,7 +447,7 @@ static void xen_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(dev_addr)) {
-		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
 		return;
 	}
 
@@ -558,11 +560,12 @@ void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 								 start_dma_addr,
 								 sg_phys(sg),
 								 sg->length,
-								 dir);
+								 dir, attrs);
 			if (map == SWIOTLB_MAP_ERROR) {
 				dev_warn(hwdev, "swiotlb buffer is full\n");
 				/* Don't panic here, we expect map_sg users
 				   to do proper error handling. */
+				attrs |= DMA_ATTR_SKIP_CPU_SYNC;
 				xen_swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
 							   attrs);
 				sg_dma_len(sgl) = 0;
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index f0d2589..183f37c 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -44,11 +44,13 @@ enum dma_sync_target {
 extern phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 					  dma_addr_t tbl_dma_addr,
 					  phys_addr_t phys, size_t size,
-					  enum dma_data_direction dir);
+					  enum dma_data_direction dir,
+					  unsigned long attrs);
 
 extern void swiotlb_tbl_unmap_single(struct device *hwdev,
 				     phys_addr_t tlb_addr,
-				     size_t size, enum dma_data_direction dir);
+				     size_t size, enum dma_data_direction dir,
+				     unsigned long attrs);
 
 extern void swiotlb_tbl_sync_single(struct device *hwdev,
 				    phys_addr_t tlb_addr,
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 5005316..a919fa1 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -425,7 +425,8 @@ static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,
 phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 				   dma_addr_t tbl_dma_addr,
 				   phys_addr_t orig_addr, size_t size,
-				   enum dma_data_direction dir)
+				   enum dma_data_direction dir,
+				   unsigned long attrs)
 {
 	unsigned long flags;
 	phys_addr_t tlb_addr;
@@ -526,7 +527,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	 */
 	for (i = 0; i < nslots; i++)
 		io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT);
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
+	    (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
 		swiotlb_bounce(orig_addr, tlb_addr, size, DMA_TO_DEVICE);
 
 	return tlb_addr;
@@ -539,18 +541,20 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 
 static phys_addr_t
 map_single(struct device *hwdev, phys_addr_t phys, size_t size,
-	   enum dma_data_direction dir)
+	   enum dma_data_direction dir, unsigned long attrs)
 {
 	dma_addr_t start_dma_addr = phys_to_dma(hwdev, io_tlb_start);
 
-	return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size, dir);
+	return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size,
+				      dir, attrs);
 }
 
 /*
  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
  */
 void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
-			      size_t size, enum dma_data_direction dir)
+			      size_t size, enum dma_data_direction dir,
+			      unsigned long attrs)
 {
 	unsigned long flags;
 	int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
@@ -561,6 +565,7 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
 	 * First, sync the memory before unmapping the entry
 	 */
 	if (orig_addr != INVALID_PHYS_ADDR &&
+	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
 	    ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
 		swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
 
@@ -654,7 +659,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
 		 * GFP_DMA memory; fall back on map_single(), which
 		 * will grab memory from the lowest available address range.
 		 */
-		phys_addr_t paddr = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
+		phys_addr_t paddr = map_single(hwdev, 0, size,
+					       DMA_FROM_DEVICE, 0);
 		if (paddr == SWIOTLB_MAP_ERROR)
 			goto err_warn;
 
@@ -669,7 +675,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
 
 			/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
 			swiotlb_tbl_unmap_single(hwdev, paddr,
-						 size, DMA_TO_DEVICE);
+						 size, DMA_TO_DEVICE,
+						 DMA_ATTR_SKIP_CPU_SYNC);
 			goto err_warn;
 		}
 	}
@@ -699,7 +706,7 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
 		free_pages((unsigned long)vaddr, get_order(size));
 	else
 		/* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
-		swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE, 0);
 }
 EXPORT_SYMBOL(swiotlb_free_coherent);
 
@@ -755,7 +762,7 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
 	/* Oh well, have to allocate and map a bounce buffer. */
-	map = map_single(dev, phys, size, dir);
+	map = map_single(dev, phys, size, dir, attrs);
 	if (map == SWIOTLB_MAP_ERROR) {
 		swiotlb_full(dev, size, dir, 1);
 		return phys_to_dma(dev, io_tlb_overflow_buffer);
@@ -764,12 +771,13 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
 	dev_addr = phys_to_dma(dev, map);
 
 	/* Ensure that the address returned is DMA'ble */
-	if (!dma_capable(dev, dev_addr, size)) {
-		swiotlb_tbl_unmap_single(dev, map, size, dir);
-		return phys_to_dma(dev, io_tlb_overflow_buffer);
-	}
+	if (dma_capable(dev, dev_addr, size))
+		return dev_addr;
+
+	swiotlb_tbl_unmap_single(dev, map, size, dir,
+				 attrs | DMA_ATTR_SKIP_CPU_SYNC);
 
-	return dev_addr;
+	return phys_to_dma(dev, io_tlb_overflow_buffer);
 }
 EXPORT_SYMBOL_GPL(swiotlb_map_page);
 
@@ -782,14 +790,15 @@ dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
  * whatever the device wrote there.
  */
 static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
-			 size_t size, enum dma_data_direction dir)
+			 size_t size, enum dma_data_direction dir,
+			 unsigned long attrs)
 {
 	phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
 
 	BUG_ON(dir == DMA_NONE);
 
 	if (is_swiotlb_buffer(paddr)) {
-		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir, attrs);
 		return;
 	}
 
@@ -809,7 +818,7 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 			size_t size, enum dma_data_direction dir,
 			unsigned long attrs)
 {
-	unmap_single(hwdev, dev_addr, size, dir);
+	unmap_single(hwdev, dev_addr, size, dir, attrs);
 }
 EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
 
@@ -891,7 +900,7 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 		if (swiotlb_force ||
 		    !dma_capable(hwdev, dev_addr, sg->length)) {
 			phys_addr_t map = map_single(hwdev, sg_phys(sg),
-						     sg->length, dir);
+						     sg->length, dir, attrs);
 			if (map == SWIOTLB_MAP_ERROR) {
 				/* Don't panic here, we expect map_sg users
 				   to do proper error handling. */
@@ -925,7 +934,8 @@ void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
 	BUG_ON(dir == DMA_NONE);
 
 	for_each_sg(sgl, sg, nelems, i)
-		unmap_single(hwdev, sg->dma_address, sg_dma_len(sg), dir);
+		unmap_single(hwdev, sg->dma_address, sg_dma_len(sg), dir,
+			     attrs);
 
 }
 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);

Re: [mm PATCH v2 03/26] swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC

[Konrad Rzeszutek Wilk]

.. snip..
> @@ -561,6 +565,7 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
>  	 * First, sync the memory before unmapping the entry
>  	 */
>  	if (orig_addr != INVALID_PHYS_ADDR &&
> +	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
>  	    ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
>  		swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
>  
> @@ -654,7 +659,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>  		 * GFP_DMA memory; fall back on map_single(), which
>  		 * will grab memory from the lowest available address range.
>  		 */
> -		phys_addr_t paddr = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
> +		phys_addr_t paddr = map_single(hwdev, 0, size,
> +					       DMA_FROM_DEVICE, 0);
>  		if (paddr == SWIOTLB_MAP_ERROR)
>  			goto err_warn;
>  
> @@ -669,7 +675,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>  
>  			/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
>  			swiotlb_tbl_unmap_single(hwdev, paddr,
> -						 size, DMA_TO_DEVICE);
> +						 size, DMA_TO_DEVICE,
> +						 DMA_ATTR_SKIP_CPU_SYNC);

This I believe is redundant. That is swiotlb_tbl_unmap_single only
does an bounce if the dir is DMA_FROM_DEVICE or DMA_BIDIRECTIONAL.

I added /* optional. */
>  			goto err_warn;
>  		}
>  	}
> @@ -699,7 +706,7 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>  		free_pages((unsigned long)vaddr, get_order(size));
>  	else
>  		/* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
> -		swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE);
> +		swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE, 0);

.. but here you choose to put 0? I changed that to
DMA_ATTR_SKIP_CPU_SYNC and expanded the comment above.

Time to test the patches.

Re: [mm PATCH v2 03/26] swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC

[Alexander Duyck]

On Sat, Nov 5, 2016 at 12:39 PM, Konrad Rzeszutek Wilk
<konrad@darnok.org> wrote:
> .. snip..
>> @@ -561,6 +565,7 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
>>        * First, sync the memory before unmapping the entry
>>        */
>>       if (orig_addr != INVALID_PHYS_ADDR &&
>> +         !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
>>           ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
>>               swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
>>
>> @@ -654,7 +659,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>>                * GFP_DMA memory; fall back on map_single(), which
>>                * will grab memory from the lowest available address range.
>>                */
>> -             phys_addr_t paddr = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
>> +             phys_addr_t paddr = map_single(hwdev, 0, size,
>> +                                            DMA_FROM_DEVICE, 0);
>>               if (paddr == SWIOTLB_MAP_ERROR)
>>                       goto err_warn;
>>
>> @@ -669,7 +675,8 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>>
>>                       /* DMA_TO_DEVICE to avoid memcpy in unmap_single */
>>                       swiotlb_tbl_unmap_single(hwdev, paddr,
>> -                                              size, DMA_TO_DEVICE);
>> +                                              size, DMA_TO_DEVICE,
>> +                                              DMA_ATTR_SKIP_CPU_SYNC);
>
> This I believe is redundant. That is swiotlb_tbl_unmap_single only
> does an bounce if the dir is DMA_FROM_DEVICE or DMA_BIDIRECTIONAL.
>
> I added /* optional. */

You are probably right.  I don't need to add the DMA_ATTR_SKIP_CPU_SYNC here.

>>                       goto err_warn;
>>               }
>>       }
>> @@ -699,7 +706,7 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
>>               free_pages((unsigned long)vaddr, get_order(size));
>>       else
>>               /* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
>> -             swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE);
>> +             swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE, 0);
>
> .. but here you choose to put 0? I changed that to
> DMA_ATTR_SKIP_CPU_SYNC and expanded the comment above.
>
> Time to test the patches.

I think I had probably realized the fact that I didn't need it above
and so just used 0 here.  I can clean this up and resubmit if you
want.

Do you want me to just split this patch set up so that I submit the
swiotlb patches to you and leave the rest of the patches for the mm
tree?

Thanks.

- Alex

[mm PATCH v2 04/26] arch/arc: Add option to skip sync on DMA mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/arc/mm/dma.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 60aab5a..ea207d2 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -133,7 +133,10 @@ static dma_addr_t arc_dma_map_page(struct device *dev, struct page *page,
 		unsigned long attrs)
 {
 	phys_addr_t paddr = page_to_phys(page) + offset;
-	_dma_cache_sync(paddr, size, dir);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		_dma_cache_sync(paddr, size, dir);
+
 	return plat_phys_to_dma(dev, paddr);
 }
 

[mm PATCH v2 05/26] arch/arm: Add option to skip sync on DMA map and unmap

[Alexander Duyck]

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder.  This change is meant to correct that so that
we get consistent behavior.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/arm/common/dmabounce.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 3012816..75055df 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -243,7 +243,8 @@ static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 }
 
 static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
-		enum dma_data_direction dir)
+				    enum dma_data_direction dir,
+				    unsigned long attrs)
 {
 	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf;
@@ -262,7 +263,8 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
 		buf->safe, buf->safe_dma_addr);
 
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
+	if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) &&
+	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
 		dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
 			__func__, ptr, buf->safe, size);
 		memcpy(buf->safe, ptr, size);
@@ -272,7 +274,8 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 }
 
 static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
-		size_t size, enum dma_data_direction dir)
+				size_t size, enum dma_data_direction dir,
+				unsigned long attrs)
 {
 	BUG_ON(buf->size != size);
 	BUG_ON(buf->direction != dir);
@@ -283,7 +286,8 @@ static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
 
-	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+	if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) &&
+	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
 		void *ptr = buf->ptr;
 
 		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
@@ -334,7 +338,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
 		return DMA_ERROR_CODE;
 	}
 
-	return map_single(dev, page_address(page) + offset, size, dir);
+	return map_single(dev, page_address(page) + offset, size, dir, attrs);
 }
 
 /*
@@ -357,7 +361,7 @@ static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t
 		return;
 	}
 
-	unmap_single(dev, buf, size, dir);
+	unmap_single(dev, buf, size, dir, attrs);
 }
 
 static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,

[mm PATCH v2 06/26] arch/avr32: Add option to skip sync on DMA map

[Alexander Duyck]

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder.  This change is meant to correct that so that
we get consistent behavior.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/avr32/mm/dma-coherent.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
index 58610d0..54534e5 100644
--- a/arch/avr32/mm/dma-coherent.c
+++ b/arch/avr32/mm/dma-coherent.c
@@ -146,7 +146,8 @@ static dma_addr_t avr32_dma_map_page(struct device *dev, struct page *page,
 {
 	void *cpu_addr = page_address(page) + offset;
 
-	dma_cache_sync(dev, cpu_addr, size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_cache_sync(dev, cpu_addr, size, direction);
 	return virt_to_bus(cpu_addr);
 }
 
@@ -162,6 +163,10 @@ static int avr32_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
 		virt = sg_virt(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		dma_cache_sync(dev, virt, sg->length, direction);
 	}
 

[mm PATCH v2 07/26] arch/blackfin: Add option to skip sync on DMA map

[Alexander Duyck]

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder.  This change is meant to correct that so that
we get consistent behavior.

Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/blackfin/kernel/dma-mapping.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index 53fbbb6..a27a74a 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -118,6 +118,10 @@ static int bfin_dma_map_sg(struct device *dev, struct scatterlist *sg_list,
 
 	for_each_sg(sg_list, sg, nents, i) {
 		sg->dma_address = (dma_addr_t) sg_virt(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
 	}
 
@@ -143,7 +147,9 @@ static dma_addr_t bfin_dma_map_page(struct device *dev, struct page *page,
 {
 	dma_addr_t handle = (dma_addr_t)(page_address(page) + offset);
 
-	_dma_sync(handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		_dma_sync(handle, size, dir);
+
 	return handle;
 }
 

[mm PATCH v2 08/26] arch/c6x: Add option to skip sync on DMA map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Acked-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/c6x/kernel/dma.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/c6x/kernel/dma.c b/arch/c6x/kernel/dma.c
index db4a6a3..6752df3 100644
--- a/arch/c6x/kernel/dma.c
+++ b/arch/c6x/kernel/dma.c
@@ -42,14 +42,17 @@ static dma_addr_t c6x_dma_map_page(struct device *dev, struct page *page,
 {
 	dma_addr_t handle = virt_to_phys(page_address(page) + offset);
 
-	c6x_dma_sync(handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		c6x_dma_sync(handle, size, dir);
+
 	return handle;
 }
 
 static void c6x_dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir, unsigned long attrs)
 {
-	c6x_dma_sync(handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		c6x_dma_sync(handle, size, dir);
 }
 
 static int c6x_dma_map_sg(struct device *dev, struct scatterlist *sglist,
@@ -60,7 +63,8 @@ static int c6x_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 	for_each_sg(sglist, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
-		c6x_dma_sync(sg->dma_address, sg->length, dir);
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			c6x_dma_sync(sg->dma_address, sg->length, dir);
 	}
 
 	return nents;
@@ -72,9 +76,11 @@ static void c6x_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 	struct scatterlist *sg;
 	int i;
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return;
+
 	for_each_sg(sglist, sg, nents, i)
 		c6x_dma_sync(sg_dma_address(sg), sg->length, dir);
-
 }
 
 static void c6x_dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,

[mm PATCH v2 09/26] arch/frv: Add option to skip sync on DMA map

[Alexander Duyck]

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder.  This change is meant to correct that so that
we get consistent behavior.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/frv/mb93090-mb00/pci-dma-nommu.c |   14 ++++++++++----
 arch/frv/mb93090-mb00/pci-dma.c       |    9 +++++++--
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 90f2e4c..1876881 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -109,16 +109,19 @@ static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 		int nents, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	int i;
 	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return nents;
 
 	for_each_sg(sglist, sg, nents, i) {
 		frv_cache_wback_inv(sg_dma_address(sg),
 				    sg_dma_address(sg) + sg_dma_len(sg));
 	}
 
-	BUG_ON(direction == DMA_NONE);
-
 	return nents;
 }
 
@@ -127,7 +130,10 @@ static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page,
 		enum dma_data_direction direction, unsigned long attrs)
 {
 	BUG_ON(direction == DMA_NONE);
-	flush_dcache_page(page);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		flush_dcache_page(page);
+
 	return (dma_addr_t) page_to_phys(page) + offset;
 }
 
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index f585745..dba7df9 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -40,13 +40,16 @@ static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 		int nents, enum dma_data_direction direction,
 		unsigned long attrs)
 {
+	struct scatterlist *sg;
 	unsigned long dampr2;
 	void *vaddr;
 	int i;
-	struct scatterlist *sg;
 
 	BUG_ON(direction == DMA_NONE);
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return nents;
+
 	dampr2 = __get_DAMPR(2);
 
 	for_each_sg(sglist, sg, nents, i) {
@@ -70,7 +73,9 @@ static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size,
 		enum dma_data_direction direction, unsigned long attrs)
 {
-	flush_dcache_page(page);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		flush_dcache_page(page);
+
 	return (dma_addr_t) page_to_phys(page) + offset;
 }
 

[mm PATCH v2 10/26] arch/hexagon: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/hexagon/kernel/dma.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c
index b901778..dbc4f10 100644
--- a/arch/hexagon/kernel/dma.c
+++ b/arch/hexagon/kernel/dma.c
@@ -119,6 +119,9 @@ static int hexagon_map_sg(struct device *hwdev, struct scatterlist *sg,
 
 		s->dma_length = s->length;
 
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		flush_dcache_range(dma_addr_to_virt(s->dma_address),
 				   dma_addr_to_virt(s->dma_address + s->length));
 	}
@@ -180,7 +183,8 @@ static dma_addr_t hexagon_map_page(struct device *dev, struct page *page,
 	if (!check_addr("map_single", dev, bus, size))
 		return bad_dma_address;
 
-	dma_sync(dma_addr_to_virt(bus), size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_sync(dma_addr_to_virt(bus), size, dir);
 
 	return bus;
 }

[mm PATCH v2 11/26] arch/m68k: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/m68k/kernel/dma.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 8cf97cb..0707006 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -134,7 +134,9 @@ static dma_addr_t m68k_dma_map_page(struct device *dev, struct page *page,
 {
 	dma_addr_t handle = page_to_phys(page) + offset;
 
-	dma_sync_single_for_device(dev, handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_sync_single_for_device(dev, handle, size, dir);
+
 	return handle;
 }
 
@@ -146,6 +148,10 @@ static int m68k_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 	for_each_sg(sglist, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		dma_sync_single_for_device(dev, sg->dma_address, sg->length,
 					   dir);
 	}

[mm PATCH v2 12/26] arch/metag: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/metag/kernel/dma.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/metag/kernel/dma.c b/arch/metag/kernel/dma.c
index 0db31e2..91968d9 100644
--- a/arch/metag/kernel/dma.c
+++ b/arch/metag/kernel/dma.c
@@ -484,8 +484,9 @@ static dma_addr_t metag_dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size,
 		enum dma_data_direction direction, unsigned long attrs)
 {
-	dma_sync_for_device((void *)(page_to_phys(page) + offset), size,
-			    direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_sync_for_device((void *)(page_to_phys(page) + offset),
+				    size, direction);
 	return page_to_phys(page) + offset;
 }
 
@@ -493,7 +494,8 @@ static void metag_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 		size_t size, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
 }
 
 static int metag_dma_map_sg(struct device *dev, struct scatterlist *sglist,
@@ -507,6 +509,10 @@ static int metag_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 		BUG_ON(!sg_page(sg));
 
 		sg->dma_address = sg_phys(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		dma_sync_for_device(sg_virt(sg), sg->length, direction);
 	}
 
@@ -525,6 +531,10 @@ static void metag_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		BUG_ON(!sg_page(sg));
 
 		sg->dma_address = sg_phys(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
 	}
 }

[mm PATCH v2 13/26] arch/microblaze: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/microblaze/kernel/dma.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index ec04dc1..818daf2 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -61,6 +61,10 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		__dma_sync(page_to_phys(sg_page(sg)) + sg->offset,
 							sg->length, direction);
 	}
@@ -80,7 +84,8 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev,
 					     enum dma_data_direction direction,
 					     unsigned long attrs)
 {
-	__dma_sync(page_to_phys(page) + offset, size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_sync(page_to_phys(page) + offset, size, direction);
 	return page_to_phys(page) + offset;
 }
 
@@ -95,7 +100,8 @@ static inline void dma_direct_unmap_page(struct device *dev,
  * phys_to_virt is here because in __dma_sync_page is __virt_to_phys and
  * dma_address is physical address
  */
-	__dma_sync(dma_address, size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_sync(dma_address, size, direction);
 }
 
 static inline void

[mm PATCH v2 14/26] arch/mips: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/mips/loongson64/common/dma-swiotlb.c |    2 +-
 arch/mips/mm/dma-default.c                |    8 +++++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index 1a80b6f..aab4fd6 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
@@ -61,7 +61,7 @@ static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
 				int nents, enum dma_data_direction dir,
 				unsigned long attrs)
 {
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, 0);
+	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, attrs);
 	mb();
 
 	return r;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 46d5696..a39c36a 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -293,7 +293,7 @@ static inline void __dma_sync(struct page *page,
 static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	size_t size, enum dma_data_direction direction, unsigned long attrs)
 {
-	if (cpu_needs_post_dma_flush(dev))
+	if (cpu_needs_post_dma_flush(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		__dma_sync(dma_addr_to_page(dev, dma_addr),
 			   dma_addr & ~PAGE_MASK, size, direction);
 	plat_post_dma_flush(dev);
@@ -307,7 +307,8 @@ static int mips_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 	struct scatterlist *sg;
 
 	for_each_sg(sglist, sg, nents, i) {
-		if (!plat_device_is_coherent(dev))
+		if (!plat_device_is_coherent(dev) &&
+		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 			__dma_sync(sg_page(sg), sg->offset, sg->length,
 				   direction);
 #ifdef CONFIG_NEED_SG_DMA_LENGTH
@@ -324,7 +325,7 @@ static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction,
 	unsigned long attrs)
 {
-	if (!plat_device_is_coherent(dev))
+	if (!plat_device_is_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		__dma_sync(page, offset, size, direction);
 
 	return plat_map_dma_mem_page(dev, page) + offset;
@@ -339,6 +340,7 @@ static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 
 	for_each_sg(sglist, sg, nhwentries, i) {
 		if (!plat_device_is_coherent(dev) &&
+		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
 		    direction != DMA_TO_DEVICE)
 			__dma_sync(sg_page(sg), sg->offset, sg->length,
 				   direction);

[mm PATCH v2 15/26] arch/nios2: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/nios2/mm/dma-mapping.c |   26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/nios2/mm/dma-mapping.c b/arch/nios2/mm/dma-mapping.c
index d800fad..f6a5dcf 100644
--- a/arch/nios2/mm/dma-mapping.c
+++ b/arch/nios2/mm/dma-mapping.c
@@ -98,13 +98,17 @@ static int nios2_dma_map_sg(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, sg, nents, i) {
-		void *addr;
+		void *addr = sg_virt(sg);
 
-		addr = sg_virt(sg);
-		if (addr) {
-			__dma_sync_for_device(addr, sg->length, direction);
-			sg->dma_address = sg_phys(sg);
-		}
+		if (!addr)
+			continue;
+
+		sg->dma_address = sg_phys(sg);
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
+		__dma_sync_for_device(addr, sg->length, direction);
 	}
 
 	return nents;
@@ -117,7 +121,9 @@ static dma_addr_t nios2_dma_map_page(struct device *dev, struct page *page,
 {
 	void *addr = page_address(page) + offset;
 
-	__dma_sync_for_device(addr, size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_sync_for_device(addr, size, direction);
+
 	return page_to_phys(page) + offset;
 }
 
@@ -125,7 +131,8 @@ static void nios2_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 		size_t size, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	__dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
 }
 
 static void nios2_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
@@ -138,6 +145,9 @@ static void nios2_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	if (direction == DMA_TO_DEVICE)
 		return;
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return;
+
 	for_each_sg(sg, sg, nhwentries, i) {
 		addr = sg_virt(sg);
 		if (addr)

[mm PATCH v2 16/26] arch/openrisc: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/openrisc/kernel/dma.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
index 140c991..906998b 100644
--- a/arch/openrisc/kernel/dma.c
+++ b/arch/openrisc/kernel/dma.c
@@ -141,6 +141,9 @@
 	unsigned long cl;
 	dma_addr_t addr = page_to_phys(page) + offset;
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return addr;
+
 	switch (dir) {
 	case DMA_TO_DEVICE:
 		/* Flush the dcache for the requested range */

[mm PATCH v2 17/26] arch/parisc: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/parisc/kernel/pci-dma.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 02d9ed0..be55ede 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -459,7 +459,9 @@ static dma_addr_t pa11_dma_map_page(struct device *dev, struct page *page,
 	void *addr = page_address(page) + offset;
 	BUG_ON(direction == DMA_NONE);
 
-	flush_kernel_dcache_range((unsigned long) addr, size);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		flush_kernel_dcache_range((unsigned long) addr, size);
+
 	return virt_to_phys(addr);
 }
 
@@ -469,8 +471,11 @@ static void pa11_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
 {
 	BUG_ON(direction == DMA_NONE);
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return;
+
 	if (direction == DMA_TO_DEVICE)
-	    return;
+		return;
 
 	/*
 	 * For PCI_DMA_FROMDEVICE this flush is not necessary for the
@@ -479,7 +484,6 @@ static void pa11_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
 	 */
 
 	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle), size);
-	return;
 }
 
 static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist,
@@ -496,6 +500,10 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 		sg_dma_address(sg) = (dma_addr_t) virt_to_phys(vaddr);
 		sg_dma_len(sg) = sg->length;
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		flush_kernel_dcache_range(vaddr, sg->length);
 	}
 	return nents;
@@ -510,14 +518,16 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 
 	BUG_ON(direction == DMA_NONE);
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return;
+
 	if (direction == DMA_TO_DEVICE)
-	    return;
+		return;
 
 	/* once we do combining we'll need to use phys_to_virt(sg_dma_address(sglist)) */
 
 	for_each_sg(sglist, sg, nents, i)
 		flush_kernel_vmap_range(sg_virt(sg), sg->length);
-	return;
 }
 
 static void pa11_dma_sync_single_for_cpu(struct device *dev,

[mm PATCH v2 18/26] arch/powerpc: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/powerpc/kernel/dma.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index e64a601..6877e3f 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -203,6 +203,10 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
 		sg->dma_length = sg->length;
+
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
 
@@ -235,7 +239,10 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev,
 					     unsigned long attrs)
 {
 	BUG_ON(dir == DMA_NONE);
-	__dma_sync_page(page, offset, size, dir);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_sync_page(page, offset, size, dir);
+
 	return page_to_phys(page) + offset + get_dma_offset(dev);
 }
 

Re: [mm PATCH v2 18/26] arch/powerpc: Add option to skip DMA sync as a part of mapping

[Michael Ellerman]

Alexander Duyck <alexander.h.duyck@intel.com> writes:

> This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
> avoid invoking cache line invalidation if the driver will just handle it
> via a sync_for_cpu or sync_for_device call.
>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: Paul Mackerras <paulus@samba.org>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: linuxppc-dev@lists.ozlabs.org
> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
> ---
>  arch/powerpc/kernel/dma.c |    9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)

LGTM.

Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)

cheers

[mm PATCH v2 19/26] arch/sh: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/sh/kernel/dma-nommu.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c
index eadb669..47fee3b 100644
--- a/arch/sh/kernel/dma-nommu.c
+++ b/arch/sh/kernel/dma-nommu.c
@@ -18,7 +18,9 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
 	dma_addr_t addr = page_to_phys(page) + offset;
 
 	WARN_ON(size == 0);
-	dma_cache_sync(dev, page_address(page) + offset, size, dir);
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		dma_cache_sync(dev, page_address(page) + offset, size, dir);
 
 	return addr;
 }
@@ -35,7 +37,8 @@ static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
 	for_each_sg(sg, s, nents, i) {
 		BUG_ON(!sg_page(s));
 
-		dma_cache_sync(dev, sg_virt(s), s->length, dir);
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			dma_cache_sync(dev, sg_virt(s), s->length, dir);
 
 		s->dma_address = sg_phys(s);
 		s->dma_length = s->length;

[mm PATCH v2 20/26] arch/sparc: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/sparc/kernel/iommu.c  |    4 ++--
 arch/sparc/kernel/ioport.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 5c615ab..8fda4e4 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -415,7 +415,7 @@ static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
 		ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
-	if (strbuf->strbuf_enabled)
+	if (strbuf->strbuf_enabled && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		strbuf_flush(strbuf, iommu, bus_addr, ctx,
 			     npages, direction);
 
@@ -640,7 +640,7 @@ static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		base = iommu->page_table + entry;
 
 		dma_handle &= IO_PAGE_MASK;
-		if (strbuf->strbuf_enabled)
+		if (strbuf->strbuf_enabled && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 			strbuf_flush(strbuf, iommu, dma_handle, ctx,
 				     npages, direction);
 
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 2344103..6ffaec4 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -527,7 +527,7 @@ static dma_addr_t pci32_map_page(struct device *dev, struct page *page,
 static void pci32_unmap_page(struct device *dev, dma_addr_t ba, size_t size,
 			     enum dma_data_direction dir, unsigned long attrs)
 {
-	if (dir != PCI_DMA_TODEVICE)
+	if (dir != PCI_DMA_TODEVICE && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 		dma_make_coherent(ba, PAGE_ALIGN(size));
 }
 
@@ -572,7 +572,7 @@ static void pci32_unmap_sg(struct device *dev, struct scatterlist *sgl,
 	struct scatterlist *sg;
 	int n;
 
-	if (dir != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
 		for_each_sg(sgl, sg, nents, n) {
 			dma_make_coherent(sg_phys(sg), PAGE_ALIGN(sg->length));
 		}

[mm PATCH v2 21/26] arch/tile: Add option to skip DMA sync as a part of map and unmap

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/tile/kernel/pci-dma.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
index 09bb774..24e0f8c 100644
--- a/arch/tile/kernel/pci-dma.c
+++ b/arch/tile/kernel/pci-dma.c
@@ -213,10 +213,12 @@ static int tile_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 
 	for_each_sg(sglist, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
-		__dma_prep_pa_range(sg->dma_address, sg->length, direction);
 #ifdef CONFIG_NEED_SG_DMA_LENGTH
 		sg->dma_length = sg->length;
 #endif
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
+		__dma_prep_pa_range(sg->dma_address, sg->length, direction);
 	}
 
 	return nents;
@@ -232,6 +234,8 @@ static void tile_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
 	BUG_ON(!valid_dma_direction(direction));
 	for_each_sg(sglist, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
+		if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+			continue;
 		__dma_complete_pa_range(sg->dma_address, sg->length,
 					direction);
 	}
@@ -245,7 +249,8 @@ static dma_addr_t tile_dma_map_page(struct device *dev, struct page *page,
 	BUG_ON(!valid_dma_direction(direction));
 
 	BUG_ON(offset + size > PAGE_SIZE);
-	__dma_prep_page(page, offset, size, direction);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_prep_page(page, offset, size, direction);
 
 	return page_to_pa(page) + offset;
 }
@@ -256,6 +261,9 @@ static void tile_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 {
 	BUG_ON(!valid_dma_direction(direction));
 
+	if (attrs & DMA_ATTR_SKIP_CPU_SYNC)
+		return;
+
 	__dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)),
 			    dma_address & (PAGE_SIZE - 1), size, direction);
 }

[mm PATCH v2 22/26] arch/xtensa: Add option to skip DMA sync as a part of mapping

[Alexander Duyck]

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 arch/xtensa/kernel/pci-dma.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 1e68806..6a16dec 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -189,7 +189,9 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
 {
 	dma_addr_t dma_handle = page_to_phys(page) + offset;
 
-	xtensa_sync_single_for_device(dev, dma_handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		xtensa_sync_single_for_device(dev, dma_handle, size, dir);
+
 	return dma_handle;
 }
 
@@ -197,7 +199,8 @@ static void xtensa_unmap_page(struct device *dev, dma_addr_t dma_handle,
 			      size_t size, enum dma_data_direction dir,
 			      unsigned long attrs)
 {
-	xtensa_sync_single_for_cpu(dev, dma_handle, size, dir);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		xtensa_sync_single_for_cpu(dev, dma_handle, size, dir);
 }
 
 static int xtensa_map_sg(struct device *dev, struct scatterlist *sg,

[mm PATCH v2 23/26] dma: Add calls for dma_map_page_attrs and dma_unmap_page_attrs

[Alexander Duyck]

Add support for mapping and unmapping a page with attributes.  The primary
use for this is currently to allow for us to pass the
DMA_ATTR_SKIP_CPU_SYNC attribute when mapping and unmapping a page.  On
some architectures such as ARM the synchronization has significant overhead
and if we are already taking care of the sync_for_cpu and sync_for_device
from the driver there isn't much need to handle this in the map/unmap calls
as well.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 include/linux/dma-mapping.h |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 08528af..10c5a17 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -243,29 +243,33 @@ static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg
 		ops->unmap_sg(dev, sg, nents, dir, attrs);
 }
 
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      size_t offset, size_t size,
-				      enum dma_data_direction dir)
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+					    struct page *page,
+					    size_t offset, size_t size,
+					    enum dma_data_direction dir,
+					    unsigned long attrs)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 	dma_addr_t addr;
 
 	kmemcheck_mark_initialized(page_address(page) + offset, size);
 	BUG_ON(!valid_dma_direction(dir));
-	addr = ops->map_page(dev, page, offset, size, dir, 0);
+	addr = ops->map_page(dev, page, offset, size, dir, attrs);
 	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
 
 	return addr;
 }
 
-static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
-				  size_t size, enum dma_data_direction dir)
+static inline void dma_unmap_page_attrs(struct device *dev,
+					dma_addr_t addr, size_t size,
+					enum dma_data_direction dir,
+					unsigned long attrs)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 
 	BUG_ON(!valid_dma_direction(dir));
 	if (ops->unmap_page)
-		ops->unmap_page(dev, addr, size, dir, 0);
+		ops->unmap_page(dev, addr, size, dir, attrs);
 	debug_dma_unmap_page(dev, addr, size, dir, false);
 }
 
@@ -385,6 +389,8 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 #define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, 0)
 #define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0)
 #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0)
+#define dma_map_page(d, p, o, s, r) dma_map_page_attrs(d, p, o, s, r, 0)
+#define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0)
 
 extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
 			   void *cpu_addr, dma_addr_t dma_addr, size_t size);

[mm PATCH v2 24/26] mm: Add support for releasing multiple instances of a page

[Alexander Duyck]

This patch adds a function that allows us to batch free a page that has
multiple references outstanding.  Specifically this function can be used to
drop a page being used in the page frag alloc cache.  With this drivers can
make use of functionality similar to the page frag alloc cache without
having to do any workarounds for the fact that there is no function that
frees multiple references.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 include/linux/gfp.h |    2 ++
 mm/page_alloc.c     |   14 ++++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index f8041f9de..4175dca 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -506,6 +506,8 @@ extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
 extern void free_hot_cold_page_list(struct list_head *list, bool cold);
 
 struct page_frag_cache;
+extern void __page_frag_drain(struct page *page, unsigned int order,
+			      unsigned int count);
 extern void *__alloc_page_frag(struct page_frag_cache *nc,
 			       unsigned int fragsz, gfp_t gfp_mask);
 extern void __free_page_frag(void *addr);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 65e0b51..bb6d7bd 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3938,6 +3938,20 @@ static struct page *__page_frag_refill(struct page_frag_cache *nc,
 	return page;
 }
 
+void __page_frag_drain(struct page *page, unsigned int order,
+		       unsigned int count)
+{
+	VM_BUG_ON_PAGE(page_ref_count(page) == 0, page);
+
+	if (page_ref_sub_and_test(page, count)) {
+		if (order == 0)
+			free_hot_cold_page(page, false);
+		else
+			__free_pages_ok(page, order);
+	}
+}
+EXPORT_SYMBOL(__page_frag_drain);
+
 void *__alloc_page_frag(struct page_frag_cache *nc,
 			unsigned int fragsz, gfp_t gfp_mask)
 {

[mm PATCH v2 25/26] igb: Update driver to make use of DMA_ATTR_SKIP_CPU_SYNC

[Alexander Duyck]

The ARM architecture provides a mechanism for deferring cache line
invalidation in the case of map/unmap.  This patch makes use of this
mechanism to avoid unnecessary synchronization.

A secondary effect of this change is that the portion of the page that has
been synchronized for use by the CPU should be writable and could be passed
up the stack (at least on ARM).

The last bit that occurred to me is that on architectures where the
sync_for_cpu call invalidates cache lines we were prefetching and then
invalidating the first 128 bytes of the packet.  To avoid that I have moved
the sync up to before we perform the prefetch and allocate the skbuff so
that we can actually make use of it.

Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |   53 ++++++++++++++++++-----------
 1 file changed, 33 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 4feca69..c8c458c 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3947,10 +3947,21 @@ static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 		if (!buffer_info->page)
 			continue;
 
-		dma_unmap_page(rx_ring->dev,
-			       buffer_info->dma,
-			       PAGE_SIZE,
-			       DMA_FROM_DEVICE);
+		/* Invalidate cache lines that may have been written to by
+		 * device so that we avoid corrupting memory.
+		 */
+		dma_sync_single_range_for_cpu(rx_ring->dev,
+					      buffer_info->dma,
+					      buffer_info->page_offset,
+					      IGB_RX_BUFSZ,
+					      DMA_FROM_DEVICE);
+
+		/* free resources associated with mapping */
+		dma_unmap_page_attrs(rx_ring->dev,
+				     buffer_info->dma,
+				     PAGE_SIZE,
+				     DMA_FROM_DEVICE,
+				     DMA_ATTR_SKIP_CPU_SYNC);
 		__free_page(buffer_info->page);
 
 		buffer_info->page = NULL;
@@ -6808,12 +6819,6 @@ static void igb_reuse_rx_page(struct igb_ring *rx_ring,
 
 	/* transfer page from old buffer to new buffer */
 	*new_buff = *old_buff;
-
-	/* sync the buffer for use by the device */
-	dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma,
-					 old_buff->page_offset,
-					 IGB_RX_BUFSZ,
-					 DMA_FROM_DEVICE);
 }
 
 static inline bool igb_page_is_reserved(struct page *page)
@@ -6934,6 +6939,13 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
 	page = rx_buffer->page;
 	prefetchw(page);
 
+	/* we are reusing so sync this buffer for CPU use */
+	dma_sync_single_range_for_cpu(rx_ring->dev,
+				      rx_buffer->dma,
+				      rx_buffer->page_offset,
+				      size,
+				      DMA_FROM_DEVICE);
+
 	if (likely(!skb)) {
 		void *page_addr = page_address(page) +
 				  rx_buffer->page_offset;
@@ -6958,21 +6970,15 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
 		prefetchw(skb->data);
 	}
 
-	/* we are reusing so sync this buffer for CPU use */
-	dma_sync_single_range_for_cpu(rx_ring->dev,
-				      rx_buffer->dma,
-				      rx_buffer->page_offset,
-				      size,
-				      DMA_FROM_DEVICE);
-
 	/* pull page into skb */
 	if (igb_add_rx_frag(rx_ring, rx_buffer, size, rx_desc, skb)) {
 		/* hand second half of page back to the ring */
 		igb_reuse_rx_page(rx_ring, rx_buffer);
 	} else {
 		/* we are not reusing the buffer so unmap it */
-		dma_unmap_page(rx_ring->dev, rx_buffer->dma,
-			       PAGE_SIZE, DMA_FROM_DEVICE);
+		dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
+				     PAGE_SIZE, DMA_FROM_DEVICE,
+				     DMA_ATTR_SKIP_CPU_SYNC);
 	}
 
 	/* clear contents of rx_buffer */
@@ -7230,7 +7236,8 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
 	}
 
 	/* map page for use */
-	dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+	dma = dma_map_page_attrs(rx_ring->dev, page, 0, PAGE_SIZE,
+				 DMA_FROM_DEVICE, DMA_ATTR_SKIP_CPU_SYNC);
 
 	/* if mapping failed free memory back to system since
 	 * there isn't much point in holding memory we can't use
@@ -7271,6 +7278,12 @@ void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count)
 		if (!igb_alloc_mapped_page(rx_ring, bi))
 			break;
 
+		/* sync the buffer for use by the device */
+		dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
+						 bi->page_offset,
+						 IGB_RX_BUFSZ,
+						 DMA_FROM_DEVICE);
+
 		/* Refresh the desc even if buffer_addrs didn't change
 		 * because each write-back erases this info.
 		 */

[mm PATCH v2 26/26] igb: Update code to better handle incrementing page count

[Alexander Duyck]

This patch updates the driver code so that we do bulk updates of the page
reference count instead of just incrementing it by one reference at a time.
The advantage to doing this is that we cut down on atomic operations and
this in turn should give us a slight improvement in cycles per packet.  In
addition if we eventually move this over to using build_skb the gains will
be more noticeable.

Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h      |    7 ++++++-
 drivers/net/ethernet/intel/igb/igb_main.c |   24 +++++++++++++++++-------
 2 files changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index d11093d..acbc3ab 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -210,7 +210,12 @@ struct igb_tx_buffer {
 struct igb_rx_buffer {
 	dma_addr_t dma;
 	struct page *page;
-	unsigned int page_offset;
+#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536)
+	__u32 page_offset;
+#else
+	__u16 page_offset;
+#endif
+	__u16 pagecnt_bias;
 };
 
 struct igb_tx_queue_stats {
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c8c458c..5e66cde 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3962,7 +3962,8 @@ static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 				     PAGE_SIZE,
 				     DMA_FROM_DEVICE,
 				     DMA_ATTR_SKIP_CPU_SYNC);
-		__free_page(buffer_info->page);
+		__page_frag_drain(buffer_info->page, 0,
+				  buffer_info->pagecnt_bias);
 
 		buffer_info->page = NULL;
 	}
@@ -6830,13 +6831,15 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
 				  struct page *page,
 				  unsigned int truesize)
 {
+	unsigned int pagecnt_bias = rx_buffer->pagecnt_bias--;
+
 	/* avoid re-using remote pages */
 	if (unlikely(igb_page_is_reserved(page)))
 		return false;
 
 #if (PAGE_SIZE < 8192)
 	/* if we are only owner of page we can reuse it */
-	if (unlikely(page_count(page) != 1))
+	if (unlikely(page_ref_count(page) != pagecnt_bias))
 		return false;
 
 	/* flip page offset to other buffer */
@@ -6849,10 +6852,14 @@ static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer,
 		return false;
 #endif
 
-	/* Even if we own the page, we are not allowed to use atomic_set()
-	 * This would break get_page_unless_zero() users.
+	/* If we have drained the page fragment pool we need to update
+	 * the pagecnt_bias and page count so that we fully restock the
+	 * number of references the driver holds.
 	 */
-	page_ref_inc(page);
+	if (unlikely(pagecnt_bias == 1)) {
+		page_ref_add(page, USHRT_MAX);
+		rx_buffer->pagecnt_bias = USHRT_MAX;
+	}
 
 	return true;
 }
@@ -6904,7 +6911,6 @@ static bool igb_add_rx_frag(struct igb_ring *rx_ring,
 			return true;
 
 		/* this page cannot be reused so discard it */
-		__free_page(page);
 		return false;
 	}
 
@@ -6975,10 +6981,13 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring,
 		/* hand second half of page back to the ring */
 		igb_reuse_rx_page(rx_ring, rx_buffer);
 	} else {
-		/* we are not reusing the buffer so unmap it */
+		/* We are not reusing the buffer so unmap it and free
+		 * any references we are holding to it
+		 */
 		dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
 				     PAGE_SIZE, DMA_FROM_DEVICE,
 				     DMA_ATTR_SKIP_CPU_SYNC);
+		__page_frag_drain(page, 0, rx_buffer->pagecnt_bias);
 	}
 
 	/* clear contents of rx_buffer */
@@ -7252,6 +7261,7 @@ static bool igb_alloc_mapped_page(struct igb_ring *rx_ring,
 	bi->dma = dma;
 	bi->page = page;
 	bi->page_offset = 0;
+	bi->pagecnt_bias = 1;
 
 	return true;
 }