From: Alexis Berlemont <alexis.berlemont@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>,
peterz@infradead.org, mingo@redhat.com, acme@kernel.org,
alexander.shishkin@linux.intel.com, hemant@linux.vnet.ibm.com
Subject: [PATCH v3 0/2] perf probe: add sdt probes arguments into the uprobe cmd string
Date: Fri, 25 Nov 2016 00:13:38 +0100 [thread overview]
Message-ID: <20161124231340.22893-1-alexis.berlemont@gmail.com> (raw)
In-Reply-To: <81ed2f2c-9569-c5bb-246d-1a4da7ec4607@linux.vnet.ibm.com>
Hi Hemant,
Once more thank you for your answer.
Sorry for this bug: I tested the patches only on small sample
binaries. Now it is tested against the systemtap-enabled libraries
libc and libpthread. There were 2 problems:
* The one you disclosed: in indirect addressing mode, positive offsets
not prefixed with a '+' character;
* Another one still in indirect addressing mode: offsets which were
not constants but symbols;
The following patches solves them both.
# cat /sys/kernel/tracing/uprobe_events
p:sdt_libpthread/pthread_start /lib/libpthread-2.23.so:0x0000000000007448 arg0=%ax:u64 arg1=+1600(%ax):u64 arg2=+1608(%ax):u64
p:sdt_libpthread/pthread_create /lib/libpthread-2.23.so:0x0000000000007be9 arg0=%ax:u64 arg1=-184(%bp):u64 arg2=-160(%bp):u64 arg3=-168(%bp):u64
p:sdt_libpthread/pthread_join /lib/libpthread-2.23.so:0x000000000000864d arg0=%di:u64
p:sdt_libpthread/pthread_join_ret /lib/libpthread-2.23.so:0x00000000000086fe arg0=%bx:u64 arg1=%ax:s32 arg2=+1584(%bx):u64
p:sdt_libpthread/mutex_init /lib/libpthread-2.23.so:0x000000000000938b arg0=%di:u64
p:sdt_libpthread/mutex_destroy /lib/libpthread-2.23.so:0x0000000000009410 arg0=%di:u64
p:sdt_libpthread/mutex_acquired /lib/libpthread-2.23.so:0x0000000000009685 arg0=%bx:u64
p:sdt_libpthread/mutex_acquired_1 /lib/libpthread-2.23.so:0x0000000000009b31 arg0=%r8:u64
...
# cat /sys/kernel/tracing/uprobe_events
p:sdt_libc/setjmp /lib/libc-2.23.so:0x0000000000033181 arg0=%di:u64 arg1=%si:s32 arg2=%ax:u64
p:sdt_libc/longjmp /lib/libc-2.23.so:0x0000000000033263 arg0=%di:u64 arg1=%si:s32 arg2=%dx:u64
p:sdt_libc/longjmp_1 /lib/libc-2.23.so:0x00000000000f7fc3 arg0=%di:u64 arg1=%si:s32 arg2=%dx:u64
p:sdt_libc/longjmp_target /lib/libc-2.23.so:0x000000000003327f arg0=%di:u64 arg1=%ax:s32 arg2=%dx:u64
p:sdt_libc/longjmp_target_1 /lib/libc-2.23.so:0x00000000000f7fdf arg0=%di:u64 arg1=%ax:s32 arg2=%dx:u64
...
Thanks,
Alexis.
Alexis Berlemont (2):
perf sdt: add scanning of sdt probles arguments
perf probe: add sdt probes arguments into the uprobe cmd string
tools/perf/arch/x86/util/perf_regs.c | 18 ++++
tools/perf/util/perf_regs.c | 4 +
tools/perf/util/perf_regs.h | 13 +++
tools/perf/util/probe-file.c | 169 ++++++++++++++++++++++++++++++++++-
tools/perf/util/symbol-elf.c | 16 +++-
tools/perf/util/symbol.h | 1 +
6 files changed, 216 insertions(+), 5 deletions(-)
--
2.10.2
next prev parent reply other threads:[~2016-11-24 23:18 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-16 23:55 [PATCH 0/2] perf: add support of SDT probes arguments Alexis Berlemont
2016-11-16 23:56 ` [PATCH 1/2] perf sdt: add scanning of sdt probles arguments Alexis Berlemont
2016-11-16 23:56 ` [PATCH 2/2] perf probe: add sdt probes arguments into the uprobe cmd string Alexis Berlemont
2016-11-17 9:04 ` Hemant Kumar
2016-11-18 23:56 ` [PATCH v2 0/2] " Alexis Berlemont
2016-11-18 23:56 ` [PATCH v2 1/2] perf sdt: add scanning of sdt probles arguments Alexis Berlemont
2016-11-25 14:40 ` Arnaldo Carvalho de Melo
2016-11-26 0:58 ` [PATCH v4 0/2] perf probe: add sdt probes arguments into the uprobe cmd string Alexis Berlemont
2016-12-05 23:42 ` Alexis Berlemont
2016-12-06 14:45 ` Arnaldo Carvalho de Melo
2016-11-26 0:58 ` [PATCH v4 1/2] perf sdt: add scanning of sdt probles arguments Alexis Berlemont
2016-12-07 2:44 ` Masami Hiramatsu
2016-11-26 0:58 ` [PATCH v4 2/2] perf probe: add sdt probes arguments into the uprobe cmd string Alexis Berlemont
2016-12-07 3:26 ` Masami Hiramatsu
2016-12-09 15:14 ` Arnaldo Carvalho de Melo
2016-12-10 10:00 ` Masami Hiramatsu
2016-12-14 0:07 ` [PATCH v5 0/2] " Alexis Berlemont
2016-12-14 7:36 ` Ingo Molnar
2017-01-23 11:23 ` Ravi Bangoria
2017-02-22 22:41 ` Alexis Berlemont
2017-01-24 6:58 ` Ravi Bangoria
2017-01-24 8:22 ` Ingo Molnar
2017-01-24 8:36 ` Ravi Bangoria
2017-02-02 11:11 ` [PATCH 0/5] perf/sdt: Argument support for x86 and powepc Ravi Bangoria
2017-02-02 11:11 ` [PATCH 1/5] perf/sdt: Show proper hint Ravi Bangoria
2017-02-02 13:40 ` Ingo Molnar
2017-02-02 16:20 ` Arnaldo Carvalho de Melo
2017-02-03 10:26 ` [PATCH v2] " Ravi Bangoria
2017-02-03 15:18 ` Arnaldo Carvalho de Melo
2017-02-07 7:53 ` Ingo Molnar
2017-02-07 15:50 ` Arnaldo Carvalho de Melo
2017-02-07 8:00 ` Ingo Molnar
2017-02-16 10:16 ` [RFC] perf/sdt: Directly record SDT event with 'perf record' Ravi Bangoria
2017-02-20 7:08 ` Ingo Molnar
2017-02-20 8:21 ` Ravi Bangoria
2017-02-20 8:42 ` Ingo Molnar
2017-02-20 11:01 ` Ravi Bangoria
2017-02-20 14:11 ` Arnaldo Carvalho de Melo
2017-02-23 8:13 ` Ravi Bangoria
2017-02-23 12:48 ` Arnaldo Carvalho de Melo
2017-02-07 1:13 ` [PATCH v2] perf/sdt: Show proper hint Masami Hiramatsu
2017-02-10 7:44 ` [tip:perf/core] perf sdt: Show proper hint when event not yet in place via 'perf probe' tip-bot for Ravi Bangoria
2017-02-02 11:11 ` [PATCH 2/5] perf/sdt/x86: Add renaming logic for rNN and other registers Ravi Bangoria
2017-02-07 3:11 ` Masami Hiramatsu
2017-03-21 14:08 ` Arnaldo Carvalho de Melo
2017-03-24 18:45 ` [tip:perf/core] perf sdt x86: " tip-bot for Ravi Bangoria
2017-02-02 11:11 ` [PATCH 3/5] perf/sdt/x86: Move OP parser to tools/perf/arch/x86/ Ravi Bangoria
2017-02-07 3:11 ` Masami Hiramatsu
2017-02-07 5:22 ` Ravi Bangoria
2017-03-21 14:10 ` Arnaldo Carvalho de Melo
2017-03-21 23:00 ` Masami Hiramatsu
2017-03-22 11:22 ` Arnaldo Carvalho de Melo
2017-03-21 14:55 ` Masami Hiramatsu
2017-02-02 11:11 ` [PATCH 4/5] perf/sdt/powerpc: Add argument support Ravi Bangoria
2017-02-02 11:11 ` [PATCH 5/5] perf/probe: Change MAX_CMDLEN Ravi Bangoria
2017-02-07 1:40 ` Masami Hiramatsu
2017-02-07 5:45 ` [PATCH v2] " Ravi Bangoria
2017-03-21 5:19 ` Masami Hiramatsu
2017-03-21 13:37 ` Arnaldo Carvalho de Melo
2017-03-24 18:43 ` [tip:perf/core] perf probe: " tip-bot for Ravi Bangoria
2017-02-07 2:55 ` [PATCH 0/5] perf/sdt: Argument support for x86 and powepc Masami Hiramatsu
2017-03-06 7:53 ` Ravi Bangoria
2017-03-06 13:42 ` Masami Hiramatsu
2017-03-21 5:08 ` [PATCH v5 0/2] perf probe: add sdt probes arguments into the uprobe cmd string Masami Hiramatsu
2016-12-14 0:07 ` [PATCH v5 1/2] perf sdt: add scanning of sdt probles arguments Alexis Berlemont
2017-03-06 13:39 ` Masami Hiramatsu
2017-03-21 13:52 ` Arnaldo Carvalho de Melo
2017-03-24 18:44 ` [tip:perf/core] perf sdt: Add scanning of sdt probes arguments tip-bot for Alexis Berlemont
2016-12-14 0:07 ` [PATCH v5 2/2] perf probe: add sdt probes arguments into the uprobe cmd string Alexis Berlemont
2017-01-24 8:50 ` Ravi Bangoria
2017-03-06 17:23 ` Masami Hiramatsu
2017-03-24 18:44 ` [tip:perf/core] perf probe: Add " tip-bot for Alexis Berlemont
2016-11-18 23:56 ` [PATCH v2 2/2] perf probe: add " Alexis Berlemont
2016-11-21 10:25 ` Hemant Kumar
2016-11-24 23:13 ` Alexis Berlemont [this message]
2016-11-24 23:13 ` [PATCH v3 1/2] perf sdt: add scanning of sdt probles arguments Alexis Berlemont
2016-11-24 23:13 ` [PATCH v3 2/2] perf probe: add sdt probes arguments into the uprobe cmd string Alexis Berlemont
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161124231340.22893-1-alexis.berlemont@gmail.com \
--to=alexis.berlemont@gmail.com \
--cc=acme@kernel.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=hemant@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).