Re: [RFC PATCH] ARM: dts: sun8i: add simplefb node for H3

* Re: [RFC PATCH] ARM: dts: sun8i: add simplefb node for H3
       [not found] <20161128095900.27615-1-icenowy@aosc.xyz>
@ 2016-11-28 10:06 ` Chen-Yu Tsai
       [not found]   ` <496171480328390@web15g.yandex.ru>
  2016-11-28 10:42 ` Jean-Francois Moine
  1 sibling, 1 reply; 6+ messages in thread
From: Chen-Yu Tsai @ 2016-11-28 10:06 UTC (permalink / raw)
  To: Icenowy Zheng
  Cc: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, Jean-Francois Moine,
	devicetree, linux-arm-kernel, linux-kernel, linux-sunxi

On Mon, Nov 28, 2016 at 5:59 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
> As there's currently a fork of U-Boot which provides simplefb support

Please add it when its finalized...

> for H3, a simplefb node can be added to the device tree.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
>
> I'm still not sure which pipeline should I use.

You are supposed to add _all_ the pipelines that are available and
supported by U-boot. U-boot is then supposed to enable and update
the one it set up.

ChenYu

>
> And, it seems that HDMI Slow Clock is not needed?
>
> (seems that it's only for EDID, but simplefb won't use EDID)
>
>  arch/arm/boot/dts/sun8i-h3.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 75a8654..cacc8dd 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -50,6 +50,22 @@
>  / {
>         interrupt-parent = <&gic>;
>
> +       chosen {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               simplefb_hdmi: framebuffer@0 {
> +                       compatible = "allwinner,simple-framebuffer",
> +                                    "simple-framebuffer";
> +                       allwinner,pipeline = "de0-lcd0-hdmi";
> +                       clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_BUS_DE>,
> +                                <&ccu CLK_BUS_HDMI>, <&ccu CLK_DE>,
> +                                <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
> +                       status = "disabled";
> +               };
> +       };
> +
>         cpus {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> --
> 2.10.2
>

^ permalink raw reply	[flat|nested] 6+ messages in thread