* [GIT PULL 00/10] perf/core improvements and fixes
@ 2016-12-07 16:53 Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 01/10] perf build: Check LLVM version in feature check Arnaldo Carvalho de Melo
` (10 more replies)
0 siblings, 11 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Alexei Starovoitov,
Andi Kleen, David Ahern, He Kuang, Jiri Olsa, Joe Stringer,
kernel-team, Minchan Kim, Namhyung Kim, Peter Zijlstra, pi3orama,
Wang Nan, Yannick Brosseau, Zefan Li, Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling, should get linux-next free of perf build fixdep
related race conditions on high core count machines,
- Arnaldo
Test results at the end of this message, as usual.
The following changes since commit 34c4a42791bbc455e65a15d12dcd0b6b3c52ad13:
Merge tag 'perf-core-for-mingo-20161205' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-12-06 09:14:56 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20161207
for you to fetch changes up to 108a7c103b761309ccbd997002e8428808cf1e04:
perf tools: Explicitly document that --children is enabled by default (2016-12-07 12:00:35 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
Improvements:
- Improve error message when analyzing file with required events in
'perf sched timehist' (David Ahern)
Fixes:
- Force fixdep compilation to be done at the start of the build, fixing
some build race conditions in high core count machines (Jiri Olsa)
- Fix handling a zero sample->tid in 'perf sched timehist', as
sometimes that isn't the idle thread (Namhyung Kim)
Infrastructure:
- Check minimal accepted LLVM version in its feature check, 3.9 at this
time (Wang Nan)
Documentation:
- Explicitly document that --children is enabled by default (Yannick Brosseau)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
David Ahern (1):
perf sched timehist: Improve error message when analyzing wrong file
Jiri Olsa (3):
perf tools: Move PERF-VERSION-FILE target into rules area
perf tools: Force fixdep compilation at the start of the build
perf tools: Move perf build related variables under non fixdep leg
Namhyung Kim (4):
perf sched: Cleanup option processing
perf callchain: Introduce callchain_cursor__copy()
perf sched timehist: Handle zero sample->tid properly
perf sched timehist: Cleanup idle_max_cpu handling
Wang Nan (1):
perf build: Check LLVM version in feature check
Yannick Brosseau (1):
perf tools: Explicitly document that --children is enabled by default
tools/build/feature/Makefile | 8 +++-
tools/build/feature/test-llvm-version.cpp | 11 +++++
tools/build/feature/test-llvm.cpp | 5 +++
tools/perf/Documentation/perf-report.txt | 3 +-
tools/perf/Documentation/perf-top.txt | 1 +
tools/perf/Makefile.config | 8 +++-
tools/perf/Makefile.perf | 68 +++++++++++++++++++++----------
tools/perf/builtin-sched.c | 26 ++++++------
tools/perf/util/callchain.c | 27 ++++++++++++
tools/perf/util/callchain.h | 3 ++
10 files changed, 122 insertions(+), 38 deletions(-)
create mode 100644 tools/build/feature/test-llvm-version.cpp
# uname -a
Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: PERF_RECORD_* events & perf_sample fields : Ok
7: Parse perf pmu format : Ok
8: DSO data read : Ok
9: DSO data cache : Ok
10: DSO data reopen : Ok
11: Roundtrip evsel->name : Ok
12: Parse sched tracepoints fields : Ok
13: syscalls:sys_enter_openat event fields : Ok
14: Setup struct perf_event_attr : Ok
15: Match and link multiple hists : Ok
16: 'import perf' in python : Ok
17: Breakpoint overflow signal handler : Ok
18: Breakpoint overflow sampling : Ok
19: Number of exit events of a simple workload : Ok
20: Software clock events period values : Ok
21: Object code reading : Ok
22: Sample parsing : Ok
23: Use a dummy software event to keep tracking: Ok
24: Parse with no sample_id_all bit set : Ok
25: Filter hist entries : Ok
26: Lookup mmap thread : Ok
27: Share thread mg : Ok
28: Sort output of hist entries : Ok
29: Cumulate child hist entries : Ok
30: Track with sched_switch : Ok
31: Filter fds with revents mask in a fdarray : Ok
32: Add fd to a fdarray, making it autogrow : Ok
33: kmod_path__parse : Ok
34: Thread map : Ok
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: Ok
35.4: Compile source for BPF relocation : Ok
36: Session topology : Ok
37: BPF filter :
37.1: Basic BPF filtering : Ok
37.2: BPF prologue generation : Ok
37.3: BPF relocation checker : Ok
38: Synthesize thread map : Ok
39: Synthesize cpu map : Ok
40: Synthesize stat config : Ok
41: Synthesize stat : Ok
42: Synthesize stat round : Ok
43: Synthesize attr update : Ok
44: Event times : Ok
45: Read backward ring buffer : Ok
46: Print cpu map : Ok
47: Probe SDT events : Ok
48: is_printable_array : Ok
49: Print bitmap : Ok
50: perf hooks : Ok
51: builtin clang support :
51.1: builtin clang compile C source to IR : Ok
51.2: builtin clang compile C source to ELF object: Ok
52: x86 rdpmc : Ok
53: Convert perf time to TSC : Ok
54: DWARF unwind : Ok
55: x86 instruction decoder - new instructions : Ok
56: Intel cqm nmi context read : Skip
#
# uname -a
Linux zoo 4.7.3-200.fc24.x86_64 #1 SMP Wed Sep 7 17:31:21 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
# time dm
1 alpine:3.4: Ok
2 android-ndk:r12b-arm: Ok
3 archlinux:latest: Ok
4 centos:5: Ok
5 centos:6: Ok
6 centos:7: Ok
7 debian:7: Ok
8 debian:8: Ok
9 debian:experimental: Ok
10 fedora:20: Ok
11 fedora:21: Ok
12 fedora:22: Ok
13 fedora:23: Ok
14 fedora:24: Ok
15 fedora:24-x-ARC-uClibc: Ok
16 fedora:rawhide: Ok
17 mageia:5: Ok
18 opensuse:13.2: Ok
19 opensuse:42.1: Ok
20 opensuse:tumbleweed: Ok
21 ubuntu:12.04.5: Ok
22 ubuntu:14.04: Ok
23 ubuntu:14.04.4: Ok
24 ubuntu:15.10: Ok
25 ubuntu:16.04: Ok
26 ubuntu:16.04-x-arm: Ok
27 ubuntu:16.04-x-arm64: Ok
28 ubuntu:16.04-x-powerpc: Ok
29 ubuntu:16.04-x-powerpc64: Ok
30 ubuntu:16.04-x-powerpc64el: Ok
31 ubuntu:16.04-x-s390: Ok
32 ubuntu:16.10: Ok
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/linux/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_help_O: make help
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_install_O: make install
make_static_O: make LDFLAGS=-static
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
make_doc_O: make doc
make_no_libbpf_O: make NO_LIBBPF=1
make_util_map_o_O: make util/map.o
make_install_bin_O: make install-bin
make_no_auxtrace_O: make NO_AUXTRACE=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_debug_O: make DEBUG=1
make_no_libelf_O: make NO_LIBELF=1
make_clean_all_O: make clean all
make_no_libperl_O: make NO_LIBPERL=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_slang_O: make NO_SLANG=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_gtk2_O: make NO_GTK2=1
make_pure_O: make
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_install_prefix_O: make install prefix=/tmp/krava
make_tags_O: make tags
make_no_demangle_O: make NO_DEMANGLE=1
make_perf_o_O: make perf.o
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_newt_O: make NO_NEWT=1
OK
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 01/10] perf build: Check LLVM version in feature check
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 02/10] perf tools: Move PERF-VERSION-FILE target into rules area Arnaldo Carvalho de Melo
` (9 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Wang Nan, Alexei Starovoitov, He Kuang, Jiri Olsa,
Joe Stringer, Zefan Li, pi3orama, Arnaldo Carvalho de Melo
From: Wang Nan <wangnan0@huawei.com>
Cancel builtin llvm and clang support when LLVM version is less than
3.9.0: following commits uses newer API.
Since Clang/LLVM's API is not guaranteed to be stable, add a
test-llvm-version.cpp feature checker, issue warning if LLVM found in
compiling environment is not tested yet.
Committer Notes:
Testing it:
Environment:
$ cat /etc/fedora-release
Fedora release 25 (Twenty Five)
$ rpm -q llvm-devel clang-devel
llvm-devel-3.8.0-1.fc25.x86_64
clang-devel-3.8.0-2.fc25.x86_64
$
Before:
$ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel
INSTALL GTK UI
LINK /tmp/build/perf/perf
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)'
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)'
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)'
<SNIP>
After:
Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0)
Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot
to git pull, duh) combo, all works as expected, it is properly detected
and built into the resulting perf binary.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com
[ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/build/feature/Makefile | 8 ++++++--
tools/build/feature/test-llvm-version.cpp | 11 +++++++++++
tools/build/feature/test-llvm.cpp | 5 +++++
tools/perf/Makefile.config | 8 ++++++--
4 files changed, 28 insertions(+), 4 deletions(-)
create mode 100644 tools/build/feature/test-llvm-version.cpp
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 303196c16019..b564a2eea039 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -231,14 +231,18 @@ $(OUTPUT)test-jvmti.bin:
$(BUILD)
$(OUTPUT)test-llvm.bin:
- $(BUILDXX) -std=gnu++11 \
+ $(BUILDXX) -std=gnu++11 \
-I$(shell $(LLVM_CONFIG) --includedir) \
-L$(shell $(LLVM_CONFIG) --libdir) \
$(shell $(LLVM_CONFIG) --libs Core BPF) \
$(shell $(LLVM_CONFIG) --system-libs)
+$(OUTPUT)test-llvm-version.bin:
+ $(BUILDXX) -std=gnu++11 \
+ -I$(shell $(LLVM_CONFIG) --includedir)
+
$(OUTPUT)test-clang.bin:
- $(BUILDXX) -std=gnu++11 \
+ $(BUILDXX) -std=gnu++11 \
-I$(shell $(LLVM_CONFIG) --includedir) \
-L$(shell $(LLVM_CONFIG) --libdir) \
-Wl,--start-group -lclangBasic -lclangDriver \
diff --git a/tools/build/feature/test-llvm-version.cpp b/tools/build/feature/test-llvm-version.cpp
new file mode 100644
index 000000000000..896d31724568
--- /dev/null
+++ b/tools/build/feature/test-llvm-version.cpp
@@ -0,0 +1,11 @@
+#include <cstdio>
+#include "llvm/Config/llvm-config.h"
+
+#define NUM_VERSION (((LLVM_VERSION_MAJOR) << 16) + (LLVM_VERSION_MINOR << 8) + LLVM_VERSION_PATCH)
+#define pass int main() {printf("%x\n", NUM_VERSION); return 0;}
+
+#if NUM_VERSION >= 0x030900
+pass
+#else
+# error This LLVM is not tested yet.
+#endif
diff --git a/tools/build/feature/test-llvm.cpp b/tools/build/feature/test-llvm.cpp
index d8d2cee35345..455a332dc8a8 100644
--- a/tools/build/feature/test-llvm.cpp
+++ b/tools/build/feature/test-llvm.cpp
@@ -1,5 +1,10 @@
#include "llvm/Support/ManagedStatic.h"
#include "llvm/Support/raw_ostream.h"
+#define NUM_VERSION (((LLVM_VERSION_MAJOR) << 16) + (LLVM_VERSION_MINOR << 8) + LLVM_VERSION_PATCH)
+
+#if NUM_VERSION < 0x030900
+# error "LLVM version too low"
+#endif
int main()
{
llvm::errs() << "Hello World!\n";
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 09c2a9874f2f..76c84f0eec52 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -802,12 +802,13 @@ ifdef LIBCLANGLLVM
msg := $(warning No g++ found, disable clang and llvm support. Please install g++)
else
$(call feature_check,llvm)
+ $(call feature_check,llvm-version)
ifneq ($(feature-llvm), 1)
- msg := $(warning No libLLVM found, disable clang and llvm support. Please install llvm-dev)
+ msg := $(warning No suitable libLLVM found, disabling builtin clang and LLVM support. Please install llvm-dev(el) (>= 3.9.0))
else
$(call feature_check,clang)
ifneq ($(feature-clang), 1)
- msg := $(warning No libclang found, disable clang and llvm support. Please install libclang-dev)
+ msg := $(warning No suitable libclang found, disabling builtin clang and LLVM support. Please install libclang-dev(el) (>= 3.9.0))
else
CFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT
CXXFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT -I$(shell $(LLVM_CONFIG) --includedir)
@@ -816,6 +817,9 @@ ifdef LIBCLANGLLVM
USE_CXX = 1
USE_LLVM = 1
USE_CLANG = 1
+ ifneq ($(feature-llvm-version),1)
+ msg := $(warning This version of LLVM is not tested. May cause build errors)
+ endif
endif
endif
endif
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 02/10] perf tools: Move PERF-VERSION-FILE target into rules area
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 01/10] perf build: Check LLVM version in feature check Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 03/10] perf tools: Force fixdep compilation at the start of the build Arnaldo Carvalho de Melo
` (8 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Jiri Olsa, David Ahern, Namhyung Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Jiri Olsa <jolsa@kernel.org>
An upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Moving PERF-VERSION-FILE target into rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 10495c9dbe71..9e5a6e1a387d 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -128,10 +128,6 @@ endif
# (this improves performance and avoids hard-to-debug behaviour);
MAKEFLAGS += -r
-$(OUTPUT)PERF-VERSION-FILE: ../../.git/HEAD
- $(Q)$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
- $(Q)touch $(OUTPUT)PERF-VERSION-FILE
-
# Makefiles suck: This macro sets a default value of $(2) for the
# variable named by $(1), unless the variable has been set by
# environment or command line. This is necessary for CC and AR
@@ -505,6 +501,10 @@ $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
$(SCRIPTS) : % : %.sh
$(QUIET_GEN)$(INSTALL) '$@.sh' '$(OUTPUT)$@'
+$(OUTPUT)PERF-VERSION-FILE: ../../.git/HEAD
+ $(Q)$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
+ $(Q)touch $(OUTPUT)PERF-VERSION-FILE
+
# These can record PERF_VERSION
perf.spec $(SCRIPTS) \
: $(OUTPUT)PERF-VERSION-FILE
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 03/10] perf tools: Force fixdep compilation at the start of the build
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 01/10] perf build: Check LLVM version in feature check Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 02/10] perf tools: Move PERF-VERSION-FILE target into rules area Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 04/10] perf tools: Move perf build related variables under non fixdep leg Arnaldo Carvalho de Melo
` (7 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Jiri Olsa, David Ahern, Namhyung Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Jiri Olsa <jolsa@kernel.org>
The fixdep tool needs to be built before everything else, because it fixes
every object dependency file.
We handle this currently by making all objects to depend on fixdep, which is
error prone and is easily forgotten when new object is added.
Instead of this, this patch force fixdep tool to be built as the first target
in the separate make session. This way we don't need to handle extra fixdep
dependencies and we are certain there's no fixdep race with any parallel make
job.
Committer notes:
Testing it:
Before:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/json.o
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/jsmn.o
HOSTCC /tmp/build/perf/pmu-events/jevents.o
HOSTLD /tmp/build/perf/pmu-events/jevents-in.o
PERF_VERSION = 4.9.rc8.g868cd5
CC /tmp/build/perf/perf-read-vdso32
<SNIP>
After:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
CC /tmp/build/perf/fd/array.o
LD /tmp/build/perf/fd/libapi-in.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/event-parse.o
CC /tmp/build/perf/fs/fs.o
PERF_VERSION = 4.9.rc8.g57a92f
CC /tmp/build/perf/event-plugin.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/fs/tracing_path.o
<SNIP>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 50 ++++++++++++++++++++++++++++++++++++------------
1 file changed, 38 insertions(+), 12 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 9e5a6e1a387d..33b1d9f8555f 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -181,6 +181,35 @@ ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),)
endif
endif
+# The fixdep build - we force fixdep tool to be built as
+# the first target in the separate make session not to be
+# disturbed by any parallel make jobs. Once fixdep is done
+# we issue the requested build with FIXDEP=1 variable.
+#
+# The fixdep build is disabled for $(NON_CONFIG_TARGETS)
+# targets, because it's not necessary.
+
+ifdef FIXDEP
+ force_fixdep := 0
+else
+ force_fixdep := $(config)
+endif
+
+export srctree OUTPUT RM CC CXX LD AR CFLAGS CXXFLAGS V BISON FLEX AWK
+export HOSTCC HOSTLD HOSTAR
+
+include $(srctree)/tools/build/Makefile.include
+
+ifeq ($(force_fixdep),1)
+goals := $(filter-out all sub-make, $(MAKECMDGOALS))
+
+$(goals) all: sub-make
+
+sub-make: fixdep
+ $(Q)$(MAKE) FIXDEP=1 -f Makefile.perf $(goals)
+
+else # force_fixdep
+
# Set FEATURE_TESTS to 'all' so all possible feature checkers are executed.
# Without this setting the output feature dump file misses some features, for
# example, liberty. Select all checkers so we won't get an incomplete feature
@@ -365,10 +394,6 @@ strip: $(PROGRAMS) $(OUTPUT)perf
PERF_IN := $(OUTPUT)perf-in.o
-export srctree OUTPUT RM CC CXX LD AR CFLAGS CXXFLAGS V BISON FLEX AWK
-export HOSTCC HOSTLD HOSTAR
-include $(srctree)/tools/build/Makefile.include
-
JEVENTS := $(OUTPUT)pmu-events/jevents
JEVENTS_IN := $(OUTPUT)pmu-events/jevents-in.o
@@ -487,7 +512,7 @@ $(OUTPUT)perf: $(PERFLIBS) $(PERF_IN) $(PMU_EVENTS_IN) $(LIBTRACEEVENT_DYNAMIC_L
$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS) \
$(PERF_IN) $(PMU_EVENTS_IN) $(LIBS) -o $@
-$(GTK_IN): fixdep FORCE
+$(GTK_IN): FORCE
$(Q)$(MAKE) $(build)=gtk
$(OUTPUT)libperf-gtk.so: $(GTK_IN) $(PERFLIBS)
@@ -536,7 +561,7 @@ endif
__build-dir = $(subst $(OUTPUT),,$(dir $@))
build-dir = $(if $(__build-dir),$(__build-dir),.)
-prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h fixdep archheaders
+prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h archheaders
$(OUTPUT)%.o: %.c prepare FORCE
$(Q)$(MAKE) -f $(srctree)/tools/build/Makefile.build dir=$(build-dir) $@
@@ -586,7 +611,7 @@ $(patsubst perf-%,%.o,$(PROGRAMS)): $(wildcard */*.h)
LIBPERF_IN := $(OUTPUT)libperf-in.o
-$(LIBPERF_IN): prepare fixdep FORCE
+$(LIBPERF_IN): prepare FORCE
$(Q)$(MAKE) $(build)=libperf
$(LIB_FILE): $(LIBPERF_IN)
@@ -594,10 +619,10 @@ $(LIB_FILE): $(LIBPERF_IN)
LIBTRACEEVENT_FLAGS += plugin_dir=$(plugindir_SQ)
-$(LIBTRACEEVENT): fixdep FORCE
+$(LIBTRACEEVENT): FORCE
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) $(OUTPUT)libtraceevent.a
-libtraceevent_plugins: fixdep FORCE
+libtraceevent_plugins: FORCE
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) plugins
$(LIBTRACEEVENT_DYNAMIC_LIST): libtraceevent_plugins
@@ -610,21 +635,21 @@ $(LIBTRACEEVENT)-clean:
install-traceevent-plugins: libtraceevent_plugins
$(Q)$(MAKE) -C $(TRACE_EVENT_DIR) $(LIBTRACEEVENT_FLAGS) O=$(OUTPUT) install_plugins
-$(LIBAPI): fixdep FORCE
+$(LIBAPI): FORCE
$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) $(OUTPUT)libapi.a
$(LIBAPI)-clean:
$(call QUIET_CLEAN, libapi)
$(Q)$(MAKE) -C $(LIB_DIR) O=$(OUTPUT) clean >/dev/null
-$(LIBBPF): fixdep FORCE
+$(LIBBPF): FORCE
$(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) $(OUTPUT)libbpf.a FEATURES_DUMP=$(FEATURE_DUMP_EXPORT)
$(LIBBPF)-clean:
$(call QUIET_CLEAN, libbpf)
$(Q)$(MAKE) -C $(BPF_DIR) O=$(OUTPUT) clean >/dev/null
-$(LIBSUBCMD): fixdep FORCE
+$(LIBSUBCMD): FORCE
$(Q)$(MAKE) -C $(SUBCMD_DIR) O=$(OUTPUT) $(OUTPUT)libsubcmd.a
$(LIBSUBCMD)-clean:
@@ -832,3 +857,4 @@ FORCE:
.PHONY: $(GIT-HEAD-PHONY) TAGS tags cscope FORCE prepare
.PHONY: libtraceevent_plugins archheaders
+endif # force_fixdep
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 04/10] perf tools: Move perf build related variables under non fixdep leg
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (2 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 03/10] perf tools: Force fixdep compilation at the start of the build Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 05/10] perf sched timehist: Improve error message when analyzing wrong file Arnaldo Carvalho de Melo
` (6 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Jiri Olsa, David Ahern, Namhyung Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Jiri Olsa <jolsa@kernel.org>
Because there's no need for them in fixdep build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Makefile.perf | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 33b1d9f8555f..8f1c258b151a 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -164,11 +164,6 @@ BISON = bison
STRIP = strip
AWK = awk
-LIB_DIR = $(srctree)/tools/lib/api/
-TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
-BPF_DIR = $(srctree)/tools/lib/bpf/
-SUBCMD_DIR = $(srctree)/tools/lib/subcmd/
-
# include Makefile.config by default and rule out
# non-config cases
config := 1
@@ -210,6 +205,11 @@ sub-make: fixdep
else # force_fixdep
+LIB_DIR = $(srctree)/tools/lib/api/
+TRACE_EVENT_DIR = $(srctree)/tools/lib/traceevent/
+BPF_DIR = $(srctree)/tools/lib/bpf/
+SUBCMD_DIR = $(srctree)/tools/lib/subcmd/
+
# Set FEATURE_TESTS to 'all' so all possible feature checkers are executed.
# Without this setting the output feature dump file misses some features, for
# example, liberty. Select all checkers so we won't get an incomplete feature
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 05/10] perf sched timehist: Improve error message when analyzing wrong file
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (3 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 04/10] perf tools: Move perf build related variables under non fixdep leg Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 06/10] perf sched: Cleanup option processing Arnaldo Carvalho de Melo
` (5 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, David Ahern, Jiri Olsa, Peter Zijlstra,
Arnaldo Carvalho de Melo
From: David Ahern <dsahern@gmail.com>
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/builtin-sched.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 870d94cd20ba..84c39f177bef 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -2629,8 +2629,12 @@ static int perf_sched__timehist(struct perf_sched *sched)
if (perf_session__set_tracepoints_handlers(session, handlers))
goto out;
- if (!perf_session__has_traces(session, "record -R"))
+ /* sched_switch event at a minimum needs to exist */
+ if (!perf_evlist__find_tracepoint_by_name(session->evlist,
+ "sched:sched_switch")) {
+ pr_err("No sched_switch events found. Have you run 'perf sched record'?\n");
goto out;
+ }
if (sched->show_migrations &&
perf_session__set_tracepoints_handlers(session, migrate_handlers))
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 06/10] perf sched: Cleanup option processing
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (4 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 05/10] perf sched timehist: Improve error message when analyzing wrong file Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 07/10] perf callchain: Introduce callchain_cursor__copy() Arnaldo Carvalho de Melo
` (4 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Namhyung Kim, Andi Kleen, Jiri Olsa, Minchan Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Namhyung Kim <namhyung@kernel.org>
The -D/--dump-raw-trace option is in the parent option so no need to
repeat it. Also move -f/--force option to parent as it's common to
handle data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/builtin-sched.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 84c39f177bef..634d8cfb4693 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -2583,6 +2583,7 @@ static int perf_sched__timehist(struct perf_sched *sched)
struct perf_data_file file = {
.path = input_name,
.mode = PERF_DATA_MODE_READ,
+ .force = sched->force,
};
struct perf_session *session;
@@ -2988,6 +2989,7 @@ int cmd_sched(int argc, const char **argv, const char *prefix __maybe_unused)
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
+ OPT_BOOLEAN('f', "force", &sched.force, "don't complain, do it"),
OPT_END()
};
const struct option latency_options[] = {
@@ -2995,8 +2997,6 @@ int cmd_sched(int argc, const char **argv, const char *prefix __maybe_unused)
"sort by key(s): runtime, switch, avg, max"),
OPT_INTEGER('C', "CPU", &sched.profile_cpu,
"CPU to profile on"),
- OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
- "dump raw trace in ASCII"),
OPT_BOOLEAN('p', "pids", &sched.skip_merge,
"latency stats per pid instead of per comm"),
OPT_PARENT(sched_options)
@@ -3004,9 +3004,6 @@ int cmd_sched(int argc, const char **argv, const char *prefix __maybe_unused)
const struct option replay_options[] = {
OPT_UINTEGER('r', "repeat", &sched.replay_repeat,
"repeat the workload replay N times (-1: infinite)"),
- OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
- "dump raw trace in ASCII"),
- OPT_BOOLEAN('f', "force", &sched.force, "don't complain, do it"),
OPT_PARENT(sched_options)
};
const struct option map_options[] = {
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 07/10] perf callchain: Introduce callchain_cursor__copy()
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (5 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 06/10] perf sched: Cleanup option processing Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 08/10] perf sched timehist: Handle zero sample->tid properly Arnaldo Carvalho de Melo
` (3 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Namhyung Kim, Andi Kleen, David Ahern, Jiri Olsa,
Minchan Kim, Peter Zijlstra, Arnaldo Carvalho de Melo
From: Namhyung Kim <namhyung@kernel.org>
The callchain_cursor__copy() function is to save current callchain
captured by a cursor. It'll be used to keep callchains when switching
to idle task for each cpu.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/util/callchain.c | 27 +++++++++++++++++++++++++++
tools/perf/util/callchain.h | 3 +++
2 files changed, 30 insertions(+)
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 823befd8209a..42922512c1c6 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -1234,3 +1234,30 @@ int callchain_node__make_parent_list(struct callchain_node *node)
}
return -ENOMEM;
}
+
+int callchain_cursor__copy(struct callchain_cursor *dst,
+ struct callchain_cursor *src)
+{
+ int rc = 0;
+
+ callchain_cursor_reset(dst);
+ callchain_cursor_commit(src);
+
+ while (true) {
+ struct callchain_cursor_node *node;
+
+ node = callchain_cursor_current(src);
+ if (node == NULL)
+ break;
+
+ rc = callchain_cursor_append(dst, node->ip, node->map, node->sym,
+ node->branch, &node->branch_flags,
+ node->nr_loop_iter, node->samples);
+ if (rc)
+ break;
+
+ callchain_cursor_advance(src);
+ }
+
+ return rc;
+}
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index d9c70dccf06a..35c8e379530f 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -216,6 +216,9 @@ static inline void callchain_cursor_advance(struct callchain_cursor *cursor)
cursor->pos++;
}
+int callchain_cursor__copy(struct callchain_cursor *dst,
+ struct callchain_cursor *src);
+
struct option;
struct hist_entry;
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 08/10] perf sched timehist: Handle zero sample->tid properly
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (6 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 07/10] perf callchain: Introduce callchain_cursor__copy() Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 09/10] perf sched timehist: Cleanup idle_max_cpu handling Arnaldo Carvalho de Melo
` (2 subsequent siblings)
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Namhyung Kim, Andi Kleen, David Ahern, Jiri Olsa,
Minchan Kim, Peter Zijlstra, Arnaldo Carvalho de Melo
From: Namhyung Kim <namhyung@kernel.org>
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new
thread of 0 tid/pid (instead of referring idle task) since tid is used
to search matching task. But I guess it's wrong to use 0 as a tid when
pid is set. This patch uses tid only if it has a non-zero value or same
as pid (of 0).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/builtin-sched.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 634d8cfb4693..c8b3e6c330c3 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -2118,7 +2118,9 @@ static struct thread *timehist_get_thread(struct perf_sched *sched,
pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu);
} else {
- thread = machine__findnew_thread(machine, sample->pid, sample->tid);
+ /* there were samples with tid 0 but non-zero pid */
+ thread = machine__findnew_thread(machine, sample->pid,
+ sample->tid ?: sample->pid);
if (thread == NULL) {
pr_debug("Failed to get thread for tid %d. skipping sample.\n",
sample->tid);
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 09/10] perf sched timehist: Cleanup idle_max_cpu handling
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (7 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 08/10] perf sched timehist: Handle zero sample->tid properly Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 10/10] perf tools: Explicitly document that --children is enabled by default Arnaldo Carvalho de Melo
2016-12-07 18:17 ` [GIT PULL 00/10] perf/core improvements and fixes Ingo Molnar
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Namhyung Kim, Andi Kleen, Jiri Olsa, Minchan Kim,
Peter Zijlstra, Arnaldo Carvalho de Melo
From: Namhyung Kim <namhyung@kernel.org>
It treats the idle_max_cpu little bit confusingly IMHO. Let's make it
more straight forward.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/builtin-sched.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index c8b3e6c330c3..1a3f1be93372 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -2010,7 +2010,7 @@ static int init_idle_threads(int ncpu)
if (!idle_threads)
return -ENOMEM;
- idle_max_cpu = ncpu - 1;
+ idle_max_cpu = ncpu;
/* allocate the actual thread struct if needed */
for (i = 0; i < ncpu; ++i) {
@@ -2031,7 +2031,7 @@ static void free_idle_threads(void)
if (idle_threads == NULL)
return;
- for (i = 0; i <= idle_max_cpu; ++i) {
+ for (i = 0; i < idle_max_cpu; ++i) {
if ((idle_threads[i]))
thread__delete(idle_threads[i]);
}
@@ -2054,8 +2054,7 @@ static struct thread *get_idle_thread(int cpu)
return NULL;
idle_threads = (struct thread **) p;
- i = idle_max_cpu ? idle_max_cpu + 1 : 0;
- for (; i < j; ++i)
+ for (i = idle_max_cpu; i < j; ++i)
idle_threads[i] = NULL;
idle_max_cpu = j;
@@ -2495,7 +2494,7 @@ static void timehist_print_summary(struct perf_sched *sched,
return;
printf("\nIdle stats:\n");
- for (i = 0; i <= idle_max_cpu; ++i) {
+ for (i = 0; i < idle_max_cpu; ++i) {
t = idle_threads[i];
if (!t)
continue;
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 10/10] perf tools: Explicitly document that --children is enabled by default
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (8 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 09/10] perf sched timehist: Cleanup idle_max_cpu handling Arnaldo Carvalho de Melo
@ 2016-12-07 16:53 ` Arnaldo Carvalho de Melo
2016-12-07 18:17 ` [GIT PULL 00/10] perf/core improvements and fixes Ingo Molnar
10 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-12-07 16:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Yannick Brosseau, Namhyung Kim, Peter Zijlstra,
kernel-team, Arnaldo Carvalho de Melo
From: Yannick Brosseau <scientist@fb.com>
The fact that the --children option is enabled by default is buried deep
at the end of the help page, in the overhead calculation section. This
make it explicit right where the option is listed, following the same
way other default options are described
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Documentation/perf-report.txt | 3 ++-
tools/perf/Documentation/perf-top.txt | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 3a166ae4a4d3..f2914f03ae7b 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -239,7 +239,8 @@ OPTIONS
Accumulate callchain of children to parent entry so that then can
show up in the output. The output will have a new "Children" column
and will be sorted on the data. It requires callchains are recorded.
- See the `overhead calculation' section for more details.
+ See the `overhead calculation' section for more details. Enabled by
+ default, disable with --no-children.
--max-stack::
Set the stack depth limit when parsing the callchain, anything
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 91d638df3a6b..e71d63843f45 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -170,6 +170,7 @@ Default is to monitor all CPUS.
show up in the output. The output will have a new "Children" column
and will be sorted on the data. It requires -g/--call-graph option
enabled. See the `overhead calculation' section for more details.
+ Enabled by default, disable with --no-children.
--max-stack::
Set the stack depth limit when parsing the callchain, anything
--
2.9.3
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
` (9 preceding siblings ...)
2016-12-07 16:53 ` [PATCH 10/10] perf tools: Explicitly document that --children is enabled by default Arnaldo Carvalho de Melo
@ 2016-12-07 18:17 ` Ingo Molnar
10 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2016-12-07 18:17 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Alexei Starovoitov, Andi Kleen, David Ahern,
He Kuang, Jiri Olsa, Joe Stringer, kernel-team, Minchan Kim,
Namhyung Kim, Peter Zijlstra, pi3orama, Wang Nan,
Yannick Brosseau, Zefan Li, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling, should get linux-next free of perf build fixdep
> related race conditions on high core count machines,
>
> - Arnaldo
>
> Test results at the end of this message, as usual.
>
> The following changes since commit 34c4a42791bbc455e65a15d12dcd0b6b3c52ad13:
>
> Merge tag 'perf-core-for-mingo-20161205' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-12-06 09:14:56 +0100)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20161207
>
> for you to fetch changes up to 108a7c103b761309ccbd997002e8428808cf1e04:
>
> perf tools: Explicitly document that --children is enabled by default (2016-12-07 12:00:35 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> Improvements:
>
> - Improve error message when analyzing file with required events in
> 'perf sched timehist' (David Ahern)
>
> Fixes:
>
> - Force fixdep compilation to be done at the start of the build, fixing
> some build race conditions in high core count machines (Jiri Olsa)
>
> - Fix handling a zero sample->tid in 'perf sched timehist', as
> sometimes that isn't the idle thread (Namhyung Kim)
>
> Infrastructure:
>
> - Check minimal accepted LLVM version in its feature check, 3.9 at this
> time (Wang Nan)
>
> Documentation:
>
> - Explicitly document that --children is enabled by default (Yannick Brosseau)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> David Ahern (1):
> perf sched timehist: Improve error message when analyzing wrong file
>
> Jiri Olsa (3):
> perf tools: Move PERF-VERSION-FILE target into rules area
> perf tools: Force fixdep compilation at the start of the build
> perf tools: Move perf build related variables under non fixdep leg
>
> Namhyung Kim (4):
> perf sched: Cleanup option processing
> perf callchain: Introduce callchain_cursor__copy()
> perf sched timehist: Handle zero sample->tid properly
> perf sched timehist: Cleanup idle_max_cpu handling
>
> Wang Nan (1):
> perf build: Check LLVM version in feature check
>
> Yannick Brosseau (1):
> perf tools: Explicitly document that --children is enabled by default
>
> tools/build/feature/Makefile | 8 +++-
> tools/build/feature/test-llvm-version.cpp | 11 +++++
> tools/build/feature/test-llvm.cpp | 5 +++
> tools/perf/Documentation/perf-report.txt | 3 +-
> tools/perf/Documentation/perf-top.txt | 1 +
> tools/perf/Makefile.config | 8 +++-
> tools/perf/Makefile.perf | 68 +++++++++++++++++++++----------
> tools/perf/builtin-sched.c | 26 ++++++------
> tools/perf/util/callchain.c | 27 ++++++++++++
> tools/perf/util/callchain.h | 3 ++
> 10 files changed, 122 insertions(+), 38 deletions(-)
> create mode 100644 tools/build/feature/test-llvm-version.cpp
>
> # uname -a
> Linux jouet 4.8.8-300.fc25.x86_64 #1 SMP Tue Nov 15 18:10:06 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
> # perf test
> 1: vmlinux symtab matches kallsyms : Ok
> 2: Detect openat syscall event : Ok
> 3: Detect openat syscall event on all cpus : Ok
> 4: Read samples using the mmap interface : Ok
> 5: Parse event definition strings : Ok
> 6: PERF_RECORD_* events & perf_sample fields : Ok
> 7: Parse perf pmu format : Ok
> 8: DSO data read : Ok
> 9: DSO data cache : Ok
> 10: DSO data reopen : Ok
> 11: Roundtrip evsel->name : Ok
> 12: Parse sched tracepoints fields : Ok
> 13: syscalls:sys_enter_openat event fields : Ok
> 14: Setup struct perf_event_attr : Ok
> 15: Match and link multiple hists : Ok
> 16: 'import perf' in python : Ok
> 17: Breakpoint overflow signal handler : Ok
> 18: Breakpoint overflow sampling : Ok
> 19: Number of exit events of a simple workload : Ok
> 20: Software clock events period values : Ok
> 21: Object code reading : Ok
> 22: Sample parsing : Ok
> 23: Use a dummy software event to keep tracking: Ok
> 24: Parse with no sample_id_all bit set : Ok
> 25: Filter hist entries : Ok
> 26: Lookup mmap thread : Ok
> 27: Share thread mg : Ok
> 28: Sort output of hist entries : Ok
> 29: Cumulate child hist entries : Ok
> 30: Track with sched_switch : Ok
> 31: Filter fds with revents mask in a fdarray : Ok
> 32: Add fd to a fdarray, making it autogrow : Ok
> 33: kmod_path__parse : Ok
> 34: Thread map : Ok
> 35: LLVM search and compile :
> 35.1: Basic BPF llvm compile : Ok
> 35.2: kbuild searching : Ok
> 35.3: Compile source for BPF prologue generation: Ok
> 35.4: Compile source for BPF relocation : Ok
> 36: Session topology : Ok
> 37: BPF filter :
> 37.1: Basic BPF filtering : Ok
> 37.2: BPF prologue generation : Ok
> 37.3: BPF relocation checker : Ok
> 38: Synthesize thread map : Ok
> 39: Synthesize cpu map : Ok
> 40: Synthesize stat config : Ok
> 41: Synthesize stat : Ok
> 42: Synthesize stat round : Ok
> 43: Synthesize attr update : Ok
> 44: Event times : Ok
> 45: Read backward ring buffer : Ok
> 46: Print cpu map : Ok
> 47: Probe SDT events : Ok
> 48: is_printable_array : Ok
> 49: Print bitmap : Ok
> 50: perf hooks : Ok
> 51: builtin clang support :
> 51.1: builtin clang compile C source to IR : Ok
> 51.2: builtin clang compile C source to ELF object: Ok
> 52: x86 rdpmc : Ok
> 53: Convert perf time to TSC : Ok
> 54: DWARF unwind : Ok
> 55: x86 instruction decoder - new instructions : Ok
> 56: Intel cqm nmi context read : Skip
> #
> # uname -a
> Linux zoo 4.7.3-200.fc24.x86_64 #1 SMP Wed Sep 7 17:31:21 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
> # time dm
> 1 alpine:3.4: Ok
> 2 android-ndk:r12b-arm: Ok
> 3 archlinux:latest: Ok
> 4 centos:5: Ok
> 5 centos:6: Ok
> 6 centos:7: Ok
> 7 debian:7: Ok
> 8 debian:8: Ok
> 9 debian:experimental: Ok
> 10 fedora:20: Ok
> 11 fedora:21: Ok
> 12 fedora:22: Ok
> 13 fedora:23: Ok
> 14 fedora:24: Ok
> 15 fedora:24-x-ARC-uClibc: Ok
> 16 fedora:rawhide: Ok
> 17 mageia:5: Ok
> 18 opensuse:13.2: Ok
> 19 opensuse:42.1: Ok
> 20 opensuse:tumbleweed: Ok
> 21 ubuntu:12.04.5: Ok
> 22 ubuntu:14.04: Ok
> 23 ubuntu:14.04.4: Ok
> 24 ubuntu:15.10: Ok
> 25 ubuntu:16.04: Ok
> 26 ubuntu:16.04-x-arm: Ok
> 27 ubuntu:16.04-x-arm64: Ok
> 28 ubuntu:16.04-x-powerpc: Ok
> 29 ubuntu:16.04-x-powerpc64: Ok
> 30 ubuntu:16.04-x-powerpc64el: Ok
> 31 ubuntu:16.04-x-s390: Ok
> 32 ubuntu:16.10: Ok
> #
> $ make -C tools/perf build-test
> make: Entering directory '/home/acme/git/linux/tools/perf'
> - tarpkg: ./tests/perf-targz-src-pkg .
> make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
> make_help_O: make help
> make_install_prefix_slash_O: make install prefix=/tmp/krava/
> make_install_O: make install
> make_static_O: make LDFLAGS=-static
> make_no_libbionic_O: make NO_LIBBIONIC=1
> make_no_backtrace_O: make NO_BACKTRACE=1
> make_no_libunwind_O: make NO_LIBUNWIND=1
> make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
> make_doc_O: make doc
> make_no_libbpf_O: make NO_LIBBPF=1
> make_util_map_o_O: make util/map.o
> make_install_bin_O: make install-bin
> make_no_auxtrace_O: make NO_AUXTRACE=1
> make_with_babeltrace_O: make LIBBABELTRACE=1
> make_with_clangllvm_O: make LIBCLANGLLVM=1
> make_debug_O: make DEBUG=1
> make_no_libelf_O: make NO_LIBELF=1
> make_clean_all_O: make clean all
> make_no_libperl_O: make NO_LIBPERL=1
> make_no_libaudit_O: make NO_LIBAUDIT=1
> make_no_slang_O: make NO_SLANG=1
> make_util_pmu_bison_o_O: make util/pmu-bison.o
> make_no_gtk2_O: make NO_GTK2=1
> make_pure_O: make
> make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
> make_install_prefix_O: make install prefix=/tmp/krava
> make_tags_O: make tags
> make_no_demangle_O: make NO_DEMANGLE=1
> make_perf_o_O: make perf.o
> make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
> make_no_libnuma_O: make NO_LIBNUMA=1
> make_no_libpython_O: make NO_LIBPYTHON=1
> make_no_newt_O: make NO_NEWT=1
> OK
> make: Leaving directory '/home/acme/git/linux/tools/perf'
> $
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2017-08-16 20:20 Arnaldo Carvalho de Melo
@ 2017-08-17 7:45 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2017-08-17 7:45 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, linux-perf-users, Arnaldo Carvalho de Melo,
Adrian Hunter, David Ahern, Hendrik Brueckner, Jiri Olsa,
Kim Phillips, Michael Petlan, Namhyung Kim, Thomas-Mich Richter,
Wang Nan
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> Test results at the end of this message, as usual.
>
> The following changes since commit cf31b7dd51b542f9a9b2d0de416b5524dfdb1cf2:
>
> Merge tag 'perf-core-for-mingo-4.14-20170814' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2017-08-14 19:38:40 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.14-20170816
>
> for you to fetch changes up to 35435cd06081d7db96bc617b65ba556f8e24340e:
>
> perf test shell: Replace '|&' with '2>&1 |' to work with more shells (2017-08-16 16:23:26 -0300)
>
> ----------------------------------------------------------------
> perf core improvements and fixes:
>
> New features:
>
> - Support exporting Intel PT data to sqlite3 with python perf scripts,
> this is in addition to the postgresql support that was already there (Adrian Hunter)
>
> Infrastructure:
>
> - Handle perf tool builds with less features in perf shell tests, such
> as those with NO_LIBDWARF=1 or even without 'perf probe' (Arnaldo Carvalho de Melo)
>
> - Replace '|&' with '2>&1 |' to work with more shells in the just
> introduced perf test shell harness (Kim Phillips)
>
> Architecture related fixes:
>
> - Fix endianness problem when loading parameters in the BPF prologue
> generated by perf, noticed using 'perf test BPF' in s390x systems (Wang Nan, Thomas Richter)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Adrian Hunter (5):
> perf scripts python: Fix missing call_path_id in export-to-postgresql script
> perf scripts python: Fix query in call-graph-from-postgresql.py
> perf script python: Add support for exporting to sqlite3
> perf script python: Rename call-graph-from-postgresql.py to call-graph-from-sql.py
> perf script python: Add support for sqlite3 to call-graph-from-sql.py
>
> Arnaldo Carvalho de Melo (3):
> perf tests shell: Remove duplicate skip_if_no_debuginfo() function
> perf test shell: Check if 'perf probe' is available, skip tests if not
> perf test shell vfs_getname: Skip for tools built with NO_LIBDWARF=1
>
> Kim Phillips (1):
> perf test shell: Replace '|&' with '2>&1 |' to work with more shells
>
> Wang Nan (1):
> perf bpf: Fix endianness problem when loading parameters in prologue
>
> tools/perf/Documentation/intel-pt.txt | 6 +-
> .../scripts/python/bin/export-to-sqlite-record | 8 +
> .../scripts/python/bin/export-to-sqlite-report | 29 ++
> ...h-from-postgresql.py => call-graph-from-sql.py} | 70 ++--
> tools/perf/scripts/python/export-to-postgresql.py | 5 +-
> tools/perf/scripts/python/export-to-sqlite.py | 451 +++++++++++++++++++++
> tools/perf/tests/bpf-script-test-prologue.c | 4 +-
> tools/perf/tests/shell/lib/probe.sh | 6 +
> tools/perf/tests/shell/lib/probe_vfs_getname.sh | 13 +-
> tools/perf/tests/shell/probe_vfs_getname.sh | 4 +
> .../tests/shell/record+script_probe_vfs_getname.sh | 4 +
> .../perf/tests/shell/trace+probe_libc_inet_pton.sh | 5 +-
> tools/perf/tests/shell/trace+probe_vfs_getname.sh | 4 +
> tools/perf/util/bpf-prologue.c | 49 ++-
> 14 files changed, 611 insertions(+), 47 deletions(-)
> create mode 100644 tools/perf/scripts/python/bin/export-to-sqlite-record
> create mode 100644 tools/perf/scripts/python/bin/export-to-sqlite-report
> rename tools/perf/scripts/python/{call-graph-from-postgresql.py => call-graph-from-sql.py} (87%)
> create mode 100644 tools/perf/scripts/python/export-to-sqlite.py
> create mode 100644 tools/perf/tests/shell/lib/probe.sh
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2017-08-16 20:20 Arnaldo Carvalho de Melo
2017-08-17 7:45 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2017-08-16 20:20 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, linux-perf-users, Arnaldo Carvalho de Melo,
Adrian Hunter, David Ahern, Hendrik Brueckner, Jiri Olsa,
Kim Phillips, Michael Petlan, Namhyung Kim, Thomas-Mich Richter,
Wang Nan
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Hi Ingo,
Please consider pulling,
- Arnaldo
Test results at the end of this message, as usual.
The following changes since commit cf31b7dd51b542f9a9b2d0de416b5524dfdb1cf2:
Merge tag 'perf-core-for-mingo-4.14-20170814' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2017-08-14 19:38:40 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.14-20170816
for you to fetch changes up to 35435cd06081d7db96bc617b65ba556f8e24340e:
perf test shell: Replace '|&' with '2>&1 |' to work with more shells (2017-08-16 16:23:26 -0300)
----------------------------------------------------------------
perf core improvements and fixes:
New features:
- Support exporting Intel PT data to sqlite3 with python perf scripts,
this is in addition to the postgresql support that was already there (Adrian Hunter)
Infrastructure:
- Handle perf tool builds with less features in perf shell tests, such
as those with NO_LIBDWARF=1 or even without 'perf probe' (Arnaldo Carvalho de Melo)
- Replace '|&' with '2>&1 |' to work with more shells in the just
introduced perf test shell harness (Kim Phillips)
Architecture related fixes:
- Fix endianness problem when loading parameters in the BPF prologue
generated by perf, noticed using 'perf test BPF' in s390x systems (Wang Nan, Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (5):
perf scripts python: Fix missing call_path_id in export-to-postgresql script
perf scripts python: Fix query in call-graph-from-postgresql.py
perf script python: Add support for exporting to sqlite3
perf script python: Rename call-graph-from-postgresql.py to call-graph-from-sql.py
perf script python: Add support for sqlite3 to call-graph-from-sql.py
Arnaldo Carvalho de Melo (3):
perf tests shell: Remove duplicate skip_if_no_debuginfo() function
perf test shell: Check if 'perf probe' is available, skip tests if not
perf test shell vfs_getname: Skip for tools built with NO_LIBDWARF=1
Kim Phillips (1):
perf test shell: Replace '|&' with '2>&1 |' to work with more shells
Wang Nan (1):
perf bpf: Fix endianness problem when loading parameters in prologue
tools/perf/Documentation/intel-pt.txt | 6 +-
.../scripts/python/bin/export-to-sqlite-record | 8 +
.../scripts/python/bin/export-to-sqlite-report | 29 ++
...h-from-postgresql.py => call-graph-from-sql.py} | 70 ++--
tools/perf/scripts/python/export-to-postgresql.py | 5 +-
tools/perf/scripts/python/export-to-sqlite.py | 451 +++++++++++++++++++++
tools/perf/tests/bpf-script-test-prologue.c | 4 +-
tools/perf/tests/shell/lib/probe.sh | 6 +
tools/perf/tests/shell/lib/probe_vfs_getname.sh | 13 +-
tools/perf/tests/shell/probe_vfs_getname.sh | 4 +
.../tests/shell/record+script_probe_vfs_getname.sh | 4 +
.../perf/tests/shell/trace+probe_libc_inet_pton.sh | 5 +-
tools/perf/tests/shell/trace+probe_vfs_getname.sh | 4 +
tools/perf/util/bpf-prologue.c | 49 ++-
14 files changed, 611 insertions(+), 47 deletions(-)
create mode 100644 tools/perf/scripts/python/bin/export-to-sqlite-record
create mode 100644 tools/perf/scripts/python/bin/export-to-sqlite-report
rename tools/perf/scripts/python/{call-graph-from-postgresql.py => call-graph-from-sql.py} (87%)
create mode 100644 tools/perf/scripts/python/export-to-sqlite.py
create mode 100644 tools/perf/tests/shell/lib/probe.sh
Test results:
The first ones are container (docker) based builds of tools/perf with and
without libelf support, objtool where it is supported and samples/bpf/, ditto.
Where clang is available, it is also used to build perf with/without libelf.
Several are cross builds, the ones with -x-ARCH, and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf
commands with a variety of command line event specifications to then
intercept the sys_perf_event syscall to check that the perf_event_attr
fields are set up as expected, among a variety of other unit tests.
The 'perf test' also runs shell scripts exercising the tools, checking
if they affect the system in certain ways, like setting up kprobes and
uprobes, request callchains for well known programs and check that they
are the expected ones, see if 'perf trace' beautifies system call
arguments correctly, etc.
Additionally, a new set of tests, script based, runs the tools in a live system,
setting probes in place that then gets used by 'perf trace', with its output
compared against expected results.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
# dm
1 alpine:3.4: Ok
2 alpine:3.5: Ok
3 alpine:3.6: Ok
4 alpine:edge: Ok
5 android-ndk:r12b-arm: Ok
6 archlinux:latest: Ok
7 centos:5: Ok
8 centos:6: Ok
9 centos:7: Ok
10 debian:7: Ok
11 debian:8: Ok
12 debian:9: Ok
13 debian:experimental: Ok
14 debian:experimental-x-arm64: Ok
15 debian:experimental-x-mips: Ok
16 debian:experimental-x-mips64: Ok
17 debian:experimental-x-mipsel: Ok
18 fedora:20: Ok
19 fedora:21: Ok
20 fedora:22: Ok
21 fedora:23: Ok
22 fedora:24: Ok
23 fedora:24-x-ARC-uClibc: Ok
24 fedora:25: Ok
25 fedora:26: Ok
26 fedora:rawhide: Ok
27 mageia:5: Ok
28 opensuse:13.2: Ok
29 opensuse:42.1: Ok
30 opensuse:42.2: Ok
31 opensuse:tumbleweed: Ok
32 oraclelinux:6: Ok
33 oraclelinux:7: Ok
34 ubuntu:12.04.5: Ok
35 ubuntu:14.04.4: Ok
36 ubuntu:14.04.4-x-linaro-arm64: Ok
37 ubuntu:15.10: Ok
38 ubuntu:16.04: Ok
39 ubuntu:16.04-x-arm: Ok
40 ubuntu:16.04-x-arm64: Ok
41 ubuntu:16.04-x-powerpc: Ok
42 ubuntu:16.04-x-powerpc64: Ok
43 ubuntu:16.04-x-powerpc64el: Ok
44 ubuntu:16.04-x-s390: Ok
45 ubuntu:16.10: Ok
46 ubuntu:17.04: Ok
47 ubuntu:17.10: Ok
#
# uname -a
Linux jouet 4.13.0-rc4+ #2 SMP Fri Aug 11 12:39:09 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: Simple expression parser : Ok
7: PERF_RECORD_* events & perf_sample fields : Ok
8: Parse perf pmu format : Ok
9: DSO data read : Ok
10: DSO data cache : Ok
11: DSO data reopen : Ok
12: Roundtrip evsel->name : Ok
13: Parse sched tracepoints fields : Ok
14: syscalls:sys_enter_openat event fields : Ok
15: Setup struct perf_event_attr : Ok
16: Match and link multiple hists : Ok
17: 'import perf' in python : Ok
18: Breakpoint overflow signal handler : Ok
19: Breakpoint overflow sampling : Ok
20: Number of exit events of a simple workload : Ok
21: Software clock events period values : Ok
22: Object code reading : Ok
23: Sample parsing : Ok
24: Use a dummy software event to keep tracking : Ok
25: Parse with no sample_id_all bit set : Ok
26: Filter hist entries : Ok
27: Lookup mmap thread : Ok
28: Share thread mg : Ok
29: Sort output of hist entries : Ok
30: Cumulate child hist entries : Ok
31: Track with sched_switch : Ok
32: Filter fds with revents mask in a fdarray : Ok
33: Add fd to a fdarray, making it autogrow : Ok
34: kmod_path__parse : Ok
35: Thread map : Ok
36: LLVM search and compile :
36.1: Basic BPF llvm compile : Ok
36.2: kbuild searching : Ok
36.3: Compile source for BPF prologue generation : Ok
36.4: Compile source for BPF relocation : Ok
37: Session topology : Ok
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
39: Synthesize thread map : Ok
40: Remove thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
46: Event times : Ok
47: Read backward ring buffer : Ok
48: Print cpu map : Ok
49: Probe SDT events : Ok
50: is_printable_array : Ok
51: Print bitmap : Ok
52: perf hooks : Ok
53: builtin clang support : Skip (not compiled in)
54: unit_number__scnprintf : Ok
55: x86 rdpmc : Ok
56: Convert perf time to TSC : Ok
57: DWARF unwind : Ok
58: x86 instruction decoder - new instructions : Ok
59: Intel cqm nmi context read : Skip
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/linux/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libelf_O: make NO_LIBELF=1
make_clean_all_O: make clean all
make_tags_O: make tags
make_perf_o_O: make perf.o
make_util_map_o_O: make util/map.o
make_install_bin_O: make install-bin
make_doc_O: make doc
make_no_demangle_O: make NO_DEMANGLE=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_libperl_O: make NO_LIBPERL=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_install_prefix_O: make install prefix=/tmp/krava
make_no_libbionic_O: make NO_LIBBIONIC=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_debug_O: make DEBUG=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_newt_O: make NO_NEWT=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_gtk2_O: make NO_GTK2=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_pure_O: make
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_slang_O: make NO_SLANG=1
make_install_O: make install
make_no_libnuma_O: make NO_LIBNUMA=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_help_O: make help
make_no_libunwind_O: make NO_LIBUNWIND=1
OK
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2017-05-03 13:58 Arnaldo Carvalho de Melo
@ 2017-05-03 17:30 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2017-05-03 17:30 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, David Ahern, Jiri Olsa,
Josh Poimboeuf, Masami Hiramatsu, Michael Petlan, Namhyung Kim,
Paul A . Clarke, Taeung Song, Wang Nan, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> Test results at the end of this message, as usual.
>
> The following changes since commit fd7647979a3948dae4fc6f25dbbdf9ba269bed78:
>
> Merge tag 'perf-core-for-mingo-4.12-20170424' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2017-04-24 23:31:35 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.12-20170503
>
> for you to fetch changes up to 4341ec6b3db4c3e903d6c44958722918baec1e59:
>
> perf config: Refactor a duplicated code for obtaining config file name (2017-05-02 18:23:12 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> Fixes:
>
> - Support setting probes in versioned user space symbols, such as
> pthread_create@@GLIBC_2.1, picking the default one, more work
> needed to make it possible to set it on the other versions, as
> the 'perf probe' syntax already uses @ for other purposes.
> (Paul Clarke)
>
> - Do not special case address zero as an error for routines that
> return addresses (symbol lookup), instead use the return as the
> success/error indication and pass a pointer to return the address,
> fixing 'perf test vmlinux' (the one that compares address between
> vmlinux and kallsyms) on s/390, where the '_text' address is equal
> to zero (Arnaldo Carvalho de Melo)
>
> Infrastructure:
>
> - More header sanitization, moving stuff out of util.h into
> more appropriate headers and objects and sometimes creating
> new ones (Arnaldo Carvalho de Melo)
>
> - Refactor a duplicated code for obtaining config file name (Taeung Song)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Arnaldo Carvalho de Melo (8):
> perf buildid: Move prototypes from util.h to build-id.h
> perf tools: Move event prototypes from util.h to event.h
> perf memswap: Split the byteswap memory range wrappers from util.[ch]
> perf tools: Move HAS_BOOL define to where perl headers are used
> perf ui gtk: Move gtk .so name to the only place where it is used
> perf units: Move parse_tag_value() to units.[ch]
> tools lib string: Adopt prefixcmp() from perf and subcmd
> perf symbols: Accept symbols starting at address 0
>
> Paul Clarke (1):
> perf symbols: Allow user probes on versioned symbols
>
> Taeung Song (1):
> perf config: Refactor a duplicated code for obtaining config file name
>
> tools/include/linux/string.h | 2 +
> tools/lib/string.c | 9 +++
> tools/lib/subcmd/help.c | 1 +
> tools/lib/subcmd/parse-options.c | 1 +
> tools/lib/subcmd/subcmd-util.h | 9 ---
> tools/perf/arch/powerpc/util/sym-handling.c | 12 ++++
> tools/perf/builtin-buildid-cache.c | 13 ++--
> tools/perf/builtin-c2c.c | 1 +
> tools/perf/builtin-config.c | 19 +++---
> tools/perf/builtin-top.c | 2 +-
> tools/perf/builtin-trace.c | 1 +
> tools/perf/perf.c | 1 +
> tools/perf/tests/hists_cumulate.c | 1 +
> tools/perf/tests/hists_filter.c | 1 +
> tools/perf/tests/hists_output.c | 1 +
> tools/perf/tests/sdt.c | 1 -
> tools/perf/ui/setup.c | 3 +
> tools/perf/util/Build | 1 +
> tools/perf/util/build-id.h | 4 ++
> tools/perf/util/event.c | 10 +--
> tools/perf/util/event.h | 12 +++-
> tools/perf/util/evsel.c | 1 +
> tools/perf/util/header.c | 1 +
> tools/perf/util/intel-pt.c | 1 +
> tools/perf/util/machine.c | 28 +++++----
> tools/perf/util/map.c | 5 --
> tools/perf/util/map.h | 5 +-
> tools/perf/util/memswap.c | 24 ++++++++
> tools/perf/util/memswap.h | 7 +++
> .../perf/util/scripting-engines/trace-event-perl.c | 4 +-
> tools/perf/util/session.c | 1 +
> tools/perf/util/strbuf.c | 9 ---
> tools/perf/util/symbol.c | 72 ++++++++++++++++------
> tools/perf/util/symbol.h | 11 ++++
> tools/perf/util/units.c | 29 +++++++++
> tools/perf/util/units.h | 7 +++
> tools/perf/util/util.c | 49 ---------------
> tools/perf/util/util.h | 26 --------
> 38 files changed, 230 insertions(+), 155 deletions(-)
> create mode 100644 tools/perf/util/memswap.c
> create mode 100644 tools/perf/util/memswap.h
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2017-05-03 13:58 Arnaldo Carvalho de Melo
2017-05-03 17:30 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2017-05-03 13:58 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
David Ahern, Jiri Olsa, Josh Poimboeuf, Masami Hiramatsu,
Michael Petlan, Namhyung Kim, Paul A . Clarke, Taeung Song,
Wang Nan, Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
Test results at the end of this message, as usual.
The following changes since commit fd7647979a3948dae4fc6f25dbbdf9ba269bed78:
Merge tag 'perf-core-for-mingo-4.12-20170424' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2017-04-24 23:31:35 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.12-20170503
for you to fetch changes up to 4341ec6b3db4c3e903d6c44958722918baec1e59:
perf config: Refactor a duplicated code for obtaining config file name (2017-05-02 18:23:12 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
Fixes:
- Support setting probes in versioned user space symbols, such as
pthread_create@@GLIBC_2.1, picking the default one, more work
needed to make it possible to set it on the other versions, as
the 'perf probe' syntax already uses @ for other purposes.
(Paul Clarke)
- Do not special case address zero as an error for routines that
return addresses (symbol lookup), instead use the return as the
success/error indication and pass a pointer to return the address,
fixing 'perf test vmlinux' (the one that compares address between
vmlinux and kallsyms) on s/390, where the '_text' address is equal
to zero (Arnaldo Carvalho de Melo)
Infrastructure:
- More header sanitization, moving stuff out of util.h into
more appropriate headers and objects and sometimes creating
new ones (Arnaldo Carvalho de Melo)
- Refactor a duplicated code for obtaining config file name (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (8):
perf buildid: Move prototypes from util.h to build-id.h
perf tools: Move event prototypes from util.h to event.h
perf memswap: Split the byteswap memory range wrappers from util.[ch]
perf tools: Move HAS_BOOL define to where perl headers are used
perf ui gtk: Move gtk .so name to the only place where it is used
perf units: Move parse_tag_value() to units.[ch]
tools lib string: Adopt prefixcmp() from perf and subcmd
perf symbols: Accept symbols starting at address 0
Paul Clarke (1):
perf symbols: Allow user probes on versioned symbols
Taeung Song (1):
perf config: Refactor a duplicated code for obtaining config file name
tools/include/linux/string.h | 2 +
tools/lib/string.c | 9 +++
tools/lib/subcmd/help.c | 1 +
tools/lib/subcmd/parse-options.c | 1 +
tools/lib/subcmd/subcmd-util.h | 9 ---
tools/perf/arch/powerpc/util/sym-handling.c | 12 ++++
tools/perf/builtin-buildid-cache.c | 13 ++--
tools/perf/builtin-c2c.c | 1 +
tools/perf/builtin-config.c | 19 +++---
tools/perf/builtin-top.c | 2 +-
tools/perf/builtin-trace.c | 1 +
tools/perf/perf.c | 1 +
tools/perf/tests/hists_cumulate.c | 1 +
tools/perf/tests/hists_filter.c | 1 +
tools/perf/tests/hists_output.c | 1 +
tools/perf/tests/sdt.c | 1 -
tools/perf/ui/setup.c | 3 +
tools/perf/util/Build | 1 +
tools/perf/util/build-id.h | 4 ++
tools/perf/util/event.c | 10 +--
tools/perf/util/event.h | 12 +++-
tools/perf/util/evsel.c | 1 +
tools/perf/util/header.c | 1 +
tools/perf/util/intel-pt.c | 1 +
tools/perf/util/machine.c | 28 +++++----
tools/perf/util/map.c | 5 --
tools/perf/util/map.h | 5 +-
tools/perf/util/memswap.c | 24 ++++++++
tools/perf/util/memswap.h | 7 +++
.../perf/util/scripting-engines/trace-event-perl.c | 4 +-
tools/perf/util/session.c | 1 +
tools/perf/util/strbuf.c | 9 ---
tools/perf/util/symbol.c | 72 ++++++++++++++++------
tools/perf/util/symbol.h | 11 ++++
tools/perf/util/units.c | 29 +++++++++
tools/perf/util/units.h | 7 +++
tools/perf/util/util.c | 49 ---------------
tools/perf/util/util.h | 26 --------
38 files changed, 230 insertions(+), 155 deletions(-)
create mode 100644 tools/perf/util/memswap.c
create mode 100644 tools/perf/util/memswap.h
Test results:
The first ones are container (docker) based builds of tools/perf with and
without libelf support, objtool where it is supported and samples/bpf/, ditto.
Where clang is available, it is also used to build perf with/without libelf.
Several are cross builds, the ones with -x-ARCH, and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
# time dm
1 alpine:3.4: Ok
2 alpine:3.5: Ok
3 alpine:edge: Ok
4 android-ndk:r12b-arm: Ok
5 archlinux:latest: Ok
6 centos:5: Ok
7 centos:6: Ok
8 centos:7: Ok
9 debian:7: Ok
10 debian:8: Ok
11 debian:9: Ok
12 debian:experimental: Ok
13 debian:experimental-x-arm64: Ok
14 debian:experimental-x-mips: Ok
15 debian:experimental-x-mips64: Ok
16 debian:experimental-x-mipsel: Ok
17 fedora:20: Ok
18 fedora:21: Ok
19 fedora:22: Ok
20 fedora:23: Ok
21 fedora:24: Ok
22 fedora:24-x-ARC-uClibc: Ok
23 fedora:25: Ok
24 fedora:rawhide: Ok
25 mageia:5: Ok
26 opensuse:13.2: Ok
27 opensuse:42.1: Ok
28 opensuse:tumbleweed: Ok
29 ubuntu:12.04.5: Ok
30 ubuntu:14.04.4: Ok
31 ubuntu:14.04.4-x-linaro-arm64: Ok
32 ubuntu:15.10: Ok
33 ubuntu:16.04: Ok
34 ubuntu:16.04-x-arm: Ok
35 ubuntu:16.04-x-arm64: Ok
36 ubuntu:16.04-x-powerpc: Ok
37 ubuntu:16.04-x-powerpc64: Ok
38 ubuntu:16.04-x-s390: Ok
39 ubuntu:16.10: Ok
40 ubuntu:17.04: Ok
#
# uname -a
Linux jouet 4.11.0-rc8+ #8 SMP Wed Apr 26 08:50:41 -03 2017 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: Simple expression parser : Ok
7: PERF_RECORD_* events & perf_sample fields : Ok
8: Parse perf pmu format : Ok
9: DSO data read : Ok
10: DSO data cache : Ok
11: DSO data reopen : Ok
12: Roundtrip evsel->name : Ok
13: Parse sched tracepoints fields : Ok
14: syscalls:sys_enter_openat event fields : Ok
15: Setup struct perf_event_attr : Ok
16: Match and link multiple hists : Ok
17: 'import perf' in python : Ok
18: Breakpoint overflow signal handler : Ok
19: Breakpoint overflow sampling : Ok
20: Number of exit events of a simple workload : Ok
21: Software clock events period values : Ok
22: Object code reading : Ok
23: Sample parsing : Ok
24: Use a dummy software event to keep tracking: Ok
25: Parse with no sample_id_all bit set : Ok
26: Filter hist entries : Ok
27: Lookup mmap thread : Ok
28: Share thread mg : Ok
29: Sort output of hist entries : Ok
30: Cumulate child hist entries : Ok
31: Track with sched_switch : Ok
32: Filter fds with revents mask in a fdarray : Ok
33: Add fd to a fdarray, making it autogrow : Ok
34: kmod_path__parse : Ok
35: Thread map : Ok
36: LLVM search and compile :
36.1: Basic BPF llvm compile : Ok
36.2: kbuild searching : Ok
36.3: Compile source for BPF prologue generation: Ok
36.4: Compile source for BPF relocation : Ok
37: Session topology : Ok
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
39: Synthesize thread map : Ok
40: Remove thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
46: Event times : Ok
47: Read backward ring buffer : Ok
48: Print cpu map : Ok
49: Probe SDT events : Ok
50: is_printable_array : Ok
51: Print bitmap : Ok
52: perf hooks : Ok
53: builtin clang support : Skip (not compiled in)
54: unit_number__scnprintf : Ok
55: x86 rdpmc : Ok
56: Convert perf time to TSC : Ok
57: DWARF unwind : Ok
58: x86 instruction decoder - new instructions : Ok
59: Intel cqm nmi context read : Skip
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/linux/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libperl_O: make NO_LIBPERL=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_no_libelf_O: make NO_LIBELF=1
make_doc_O: make doc
make_no_libunwind_O: make NO_LIBUNWIND=1
make_clean_all_O: make clean all
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_util_map_o_O: make util/map.o
make_no_libnuma_O: make NO_LIBNUMA=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_demangle_O: make NO_DEMANGLE=1
make_tags_O: make tags
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_slang_O: make NO_SLANG=1
make_help_O: make help
make_no_gtk2_O: make NO_GTK2=1
make_install_prefix_O: make install prefix=/tmp/krava
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
make_install_O: make install
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_libpython_O: make NO_LIBPYTHON=1
make_perf_o_O: make perf.o
make_no_auxtrace_O: make NO_AUXTRACE=1
make_pure_O: make
make_no_libbpf_O: make NO_LIBBPF=1
make_no_newt_O: make NO_NEWT=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_static_O: make LDFLAGS=-static
make_install_bin_O: make install-bin
make_debug_O: make DEBUG=1
make_no_backtrace_O: make NO_BACKTRACE=1
OK
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2017-01-17 16:06 Arnaldo Carvalho de Melo
@ 2017-01-18 9:09 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2017-01-18 9:09 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Alexander Shishkin,
Andi Kleen, David Ahern, David Carrillo-Cisneros, Jiri Olsa,
kernel-team, Mark Drayton, Michael Petlan, Minchan Kim,
Namhyung Kim, Peter Zijlstra, Soramichi Akiyama,
Stephane Eranian, Thomas Gleixner, Yannick Brosseau
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> Test results at the end of this message, as usual.
>
> The following changes since commit 5b485629ba0d5d027880769ff467c587b24b4bde:
>
> kprobes, extable: Identify kprobes trampolines as kernel text area (2017-01-14 08:38:05 +0100)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.11-20170117
>
> for you to fetch changes up to d94386f28abad0c5879f0760712e34e71f88a7da:
>
> perf evlist: Fix typo in deliver_sample() (2017-01-17 11:36:45 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> New feature:
>
> - Account thread wait time (off cpu time) separately: sleep, iowait and
> preempt, based on the prev_state of the last event, show the breakdown
> when using "perf sched timehist --state" (Namhyumg Kim)
>
> Infrastructure:
>
> - Factor out pmu scale conversion code (Andi Kleen)
>
> - Remove unnecessary feature-dwarf warning (David Carrillo-Cisneros)
>
> - Add missing member name in OPT_() macros (Soramichi AKIYAMA)
>
> - Move variables referenced in libperf.a object files from perf's main()
> file, so that other tools can use libperf.a with a different main()
> (Soramichi AKIYAMA)
>
> Documentation:
>
> - Fix 'perf script' man page about --dump-raw-trace option (Michael Petlan)
>
> - Also allow forcing reading of non-root owned files by root in 'perf
> script' (Yannick Brosseau)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Andi Kleen (1):
> perf pmu: Factor out scale conversion code
>
> David Carrillo-Cisneros (1):
> perf tools: Remove unneccessary feature-dwarf warning
>
> Michael Petlan (1):
> perf script: Fix man page about --dump-raw-trace option
>
> Namhyung Kim (3):
> perf sched timehist: Account thread wait time separately
> perf sched timehist: Add --state option
> perf sched timehist: Show total wait times for summary
>
> Soramichi AKIYAMA (3):
> tools lib subcmd: Fix missing member name
> perf tools: Move two variables usied in libperf from perf.c
> perf evlist: Fix typo in deliver_sample()
>
> Yannick Brosseau (1):
> perf script: Also allow forcing reading of non-root owned files by root
>
> tools/lib/subcmd/parse-options.h | 18 ++---
> tools/perf/Build | 3 +-
> tools/perf/Documentation/perf-sched.txt | 2 +
> tools/perf/Documentation/perf-script.txt | 4 +-
> tools/perf/Makefile.config | 6 +-
> tools/perf/builtin-sched.c | 130 ++++++++++++++++++++++++++++---
> tools/perf/builtin-script.c | 3 +-
> tools/perf/perf.c | 3 -
> tools/perf/ui/setup.c | 1 +
> tools/perf/util/Build | 1 +
> tools/perf/util/header.c | 2 +
> tools/perf/util/pmu.c | 62 ++++++++-------
> tools/perf/util/session.c | 2 +-
> 13 files changed, 177 insertions(+), 60 deletions(-)
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2017-01-17 16:06 Arnaldo Carvalho de Melo
2017-01-18 9:09 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2017-01-17 16:06 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Alexander Shishkin,
Andi Kleen, David Ahern, David Carrillo-Cisneros, Jiri Olsa,
kernel-team, Mark Drayton, Michael Petlan, Minchan Kim,
Namhyung Kim, Peter Zijlstra, Soramichi Akiyama,
Stephane Eranian, Thomas Gleixner, Yannick Brosseau
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Hi Ingo,
Please consider pulling,
- Arnaldo
Test results at the end of this message, as usual.
The following changes since commit 5b485629ba0d5d027880769ff467c587b24b4bde:
kprobes, extable: Identify kprobes trampolines as kernel text area (2017-01-14 08:38:05 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-4.11-20170117
for you to fetch changes up to d94386f28abad0c5879f0760712e34e71f88a7da:
perf evlist: Fix typo in deliver_sample() (2017-01-17 11:36:45 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
New feature:
- Account thread wait time (off cpu time) separately: sleep, iowait and
preempt, based on the prev_state of the last event, show the breakdown
when using "perf sched timehist --state" (Namhyumg Kim)
Infrastructure:
- Factor out pmu scale conversion code (Andi Kleen)
- Remove unnecessary feature-dwarf warning (David Carrillo-Cisneros)
- Add missing member name in OPT_() macros (Soramichi AKIYAMA)
- Move variables referenced in libperf.a object files from perf's main()
file, so that other tools can use libperf.a with a different main()
(Soramichi AKIYAMA)
Documentation:
- Fix 'perf script' man page about --dump-raw-trace option (Michael Petlan)
- Also allow forcing reading of non-root owned files by root in 'perf
script' (Yannick Brosseau)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Andi Kleen (1):
perf pmu: Factor out scale conversion code
David Carrillo-Cisneros (1):
perf tools: Remove unneccessary feature-dwarf warning
Michael Petlan (1):
perf script: Fix man page about --dump-raw-trace option
Namhyung Kim (3):
perf sched timehist: Account thread wait time separately
perf sched timehist: Add --state option
perf sched timehist: Show total wait times for summary
Soramichi AKIYAMA (3):
tools lib subcmd: Fix missing member name
perf tools: Move two variables usied in libperf from perf.c
perf evlist: Fix typo in deliver_sample()
Yannick Brosseau (1):
perf script: Also allow forcing reading of non-root owned files by root
tools/lib/subcmd/parse-options.h | 18 ++---
tools/perf/Build | 3 +-
tools/perf/Documentation/perf-sched.txt | 2 +
tools/perf/Documentation/perf-script.txt | 4 +-
tools/perf/Makefile.config | 6 +-
tools/perf/builtin-sched.c | 130 ++++++++++++++++++++++++++++---
tools/perf/builtin-script.c | 3 +-
tools/perf/perf.c | 3 -
tools/perf/ui/setup.c | 1 +
tools/perf/util/Build | 1 +
tools/perf/util/header.c | 2 +
tools/perf/util/pmu.c | 62 ++++++++-------
tools/perf/util/session.c | 2 +-
13 files changed, 177 insertions(+), 60 deletions(-)
Test results:
The first ones are container (docker) based builds of tools/perf with and
without libelf support, objtool where it is supported and samples/bpf/, ditto.
Several are cross builds, the ones with -x-ARCH, and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
# time dm
1 alpine:3.4: Ok
2 android-ndk:r12b-arm: Ok
3 archlinux:latest: Ok
4 centos:5: Ok
5 centos:6: Ok
6 centos:7: Ok
7 debian:7: Ok
8 debian:8: Ok
9 debian:experimental: Ok
10 debian:experimental-x-arm64: Ok
11 debian:experimental-x-mips: Ok
12 debian:experimental-x-mips64: Ok
13 debian:experimental-x-mipsel: Ok
14 fedora:20: Ok
15 fedora:21: Ok
16 fedora:22: Ok
17 fedora:23: Ok
18 fedora:24: Ok
19 fedora:24-x-ARC-uClibc: Ok
20 fedora:25: Ok
21 fedora:rawhide: Ok
22 mageia:5: Ok
23 opensuse:13.2: Ok
24 opensuse:42.1: Ok
25 opensuse:tumbleweed: Ok
26 ubuntu:12.04.5: Ok
27 ubuntu:14.04.4-x-linaro-arm64: Ok
28 ubuntu:15.10: Ok
29 ubuntu:16.04: Ok
30 ubuntu:16.04-x-arm: Ok
31 ubuntu:16.04-x-arm64: Ok
32 ubuntu:16.04-x-powerpc: Ok
33 ubuntu:16.04-x-powerpc64: Ok
34 ubuntu:16.04-x-powerpc64el: Ok
35 ubuntu:16.04-x-s390: Ok
36 ubuntu:16.10: Ok
#
# uname -a
Linux jouet 4.9.0+ #2 SMP Wed Dec 21 11:54:44 BRT 2016 x86_64 x86_64 x86_64 GNU/Linux
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: PERF_RECORD_* events & perf_sample fields : Ok
7: Parse perf pmu format : Ok
8: DSO data read : Ok
9: DSO data cache : Ok
10: DSO data reopen : Ok
11: Roundtrip evsel->name : Ok
12: Parse sched tracepoints fields : Ok
13: syscalls:sys_enter_openat event fields : Ok
14: Setup struct perf_event_attr : Ok
15: Match and link multiple hists : Ok
16: 'import perf' in python : Ok
17: Breakpoint overflow signal handler : Ok
18: Breakpoint overflow sampling : Ok
19: Number of exit events of a simple workload : Ok
20: Software clock events period values : Ok
21: Object code reading : Ok
22: Sample parsing : Ok
23: Use a dummy software event to keep tracking: Ok
24: Parse with no sample_id_all bit set : Ok
25: Filter hist entries : Ok
26: Lookup mmap thread : Ok
27: Share thread mg : Ok
28: Sort output of hist entries : Ok
29: Cumulate child hist entries : Ok
30: Track with sched_switch : Ok
31: Filter fds with revents mask in a fdarray : Ok
32: Add fd to a fdarray, making it autogrow : Ok
33: kmod_path__parse : Ok
34: Thread map : Ok
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: Ok
35.4: Compile source for BPF relocation : Ok
36: Session topology : Ok
37: BPF filter :
37.1: Basic BPF filtering : Ok
37.2: BPF prologue generation : Ok
37.3: BPF relocation checker : Ok
38: Synthesize thread map : Ok
39: Remove thread map : Ok
40: Synthesize cpu map : Ok
41: Synthesize stat config : Ok
42: Synthesize stat : Ok
43: Synthesize stat round : Ok
44: Synthesize attr update : Ok
45: Event times : Ok
46: Read backward ring buffer : Ok
47: Print cpu map : Ok
48: Probe SDT events : Ok
49: is_printable_array : Ok
50: Print bitmap : Ok
51: perf hooks : Ok
52: builtin clang support : Skip (not compiled in)
53: unit_number__scnprintf : Ok
54: x86 rdpmc : Ok
55: Convert perf time to TSC : Ok
56: DWARF unwind : Ok
57: x86 instruction decoder - new instructions : Ok
58: Intel cqm nmi context read : Skip
#
$ make -C tools/perf build-test
make: Entering directory '/home/acme/git/linux/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make FEATURE_DUMP_COPY=/home/acme/git/linux/tools/perf/BUILD_TEST_FEATURE_DUMP feature-dump
make_no_libperl_O: make NO_LIBPERL=1
make_doc_O: make doc
make_no_backtrace_O: make NO_BACKTRACE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_help_O: make help
make_no_gtk2_O: make NO_GTK2=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_clean_all_O: make clean all
make_install_bin_O: make install-bin
make_no_libbionic_O: make NO_LIBBIONIC=1
make_install_O: make install
make_debug_O: make DEBUG=1
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_install_prefix_O: make install prefix=/tmp/krava
make_perf_o_O: make perf.o
make_no_libpython_O: make NO_LIBPYTHON=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_slang_O: make NO_SLANG=1
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_newt_O: make NO_NEWT=1
make_no_libbpf_O: make NO_LIBBPF=1
make_util_map_o_O: make util/map.o
make_static_O: make LDFLAGS=-static
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_libelf_O: make NO_LIBELF=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_tags_O: make tags
make_pure_O: make
make_no_libnuma_O: make NO_LIBNUMA=1
OK
make: Leaving directory '/home/acme/git/linux/tools/perf'
$
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-06-21 10:08 ` Paolo Bonzini
@ 2016-06-21 16:14 ` Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-06-21 16:14 UTC (permalink / raw)
To: Paolo Bonzini
Cc: Brendan Gregg, Namhyung Kim, Arnaldo Carvalho de Melo,
Ingo Molnar, linux-kernel, Adrian Hunter, Alexander Shishkin,
Alexei Starovoitov, Andi Kleen, David Ahern, Ekaterina Tumanova,
He Kuang, Jean Delvare, Jiri Olsa, Josh Poimboeuf, Kan Liang,
linux-kbuild, Masami Hiramatsu, Michal Marek, Pekka Enberg,
Peter Zijlstra, pi3orama, Stephane Eranian, Sukadev Bhattiprolu,
Wang Nan, Zefan Li
Em Tue, Jun 21, 2016 at 12:08:47PM +0200, Paolo Bonzini escreveu:
> On 21/06/2016 05:11, Brendan Gregg wrote:
> >>> > > - Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini)
> >> >
> >> > I think this is already done by '-g folded'. Please see:
> >> >
> >> > http://www.brendangregg.com/blog/2016-04-30/linux-perf-folded.html
> >> >
> > Pretty much. Two similar solutions were developed around the same
> > time. Although I have to use some awk to get "perf -g folded" in the
> > exact right format, and stackcollapse-perf.py does that directly.
>
> Yes, the idea for stackcollapse-perf.py was:
>
> - to do everything directly and emit "the right" format for the
> flamegraph tools. This however is a very minimal output, and it's not
> necessarily the best for perf in general.
>
> - to provide an example of visiting callgraphs from the scripting
> interface, since it's not really documented. From the commit message:
> "Add stackcollapse.py script as an example of parsing call chains, and
> also of using optparse to access command line options".
Yeah, agreed, its short, and it provides the output ready to be used, no
need for extra processing, up to the user to decide if one or the other
is more suitable to their needs.
As a bonus, it documents callgraphs in scripts, good deal :-)
- Arnaldo
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-06-21 3:11 ` Brendan Gregg
@ 2016-06-21 10:08 ` Paolo Bonzini
2016-06-21 16:14 ` Arnaldo Carvalho de Melo
0 siblings, 1 reply; 57+ messages in thread
From: Paolo Bonzini @ 2016-06-21 10:08 UTC (permalink / raw)
To: Brendan Gregg, Namhyung Kim
Cc: Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel,
Adrian Hunter, Alexander Shishkin, Alexei Starovoitov,
Andi Kleen, David Ahern, Ekaterina Tumanova, He Kuang,
Jean Delvare, Jiri Olsa, Josh Poimboeuf, Kan Liang, linux-kbuild,
Masami Hiramatsu, Michal Marek, Pekka Enberg, Peter Zijlstra,
pi3orama, Stephane Eranian, Sukadev Bhattiprolu, Wang Nan,
Zefan Li, Arnaldo Carvalho de Melo
On 21/06/2016 05:11, Brendan Gregg wrote:
>>> > > - Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini)
>> >
>> > I think this is already done by '-g folded'. Please see:
>> >
>> > http://www.brendangregg.com/blog/2016-04-30/linux-perf-folded.html
>> >
> Pretty much. Two similar solutions were developed around the same
> time. Although I have to use some awk to get "perf -g folded" in the
> exact right format, and stackcollapse-perf.py does that directly.
Yes, the idea for stackcollapse-perf.py was:
- to do everything directly and emit "the right" format for the
flamegraph tools. This however is a very minimal output, and it's not
necessarily the best for perf in general.
- to provide an example of visiting callgraphs from the scripting
interface, since it's not really documented. From the commit message:
"Add stackcollapse.py script as an example of parsing call chains, and
also of using optparse to access command line options".
Paolo
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-06-21 2:18 ` Namhyung Kim
@ 2016-06-21 3:11 ` Brendan Gregg
2016-06-21 10:08 ` Paolo Bonzini
0 siblings, 1 reply; 57+ messages in thread
From: Brendan Gregg @ 2016-06-21 3:11 UTC (permalink / raw)
To: Namhyung Kim
Cc: Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel,
Adrian Hunter, Alexander Shishkin, Alexei Starovoitov,
Andi Kleen, David Ahern, Ekaterina Tumanova, He Kuang,
Jean Delvare, Jiri Olsa, Josh Poimboeuf, Kan Liang, linux-kbuild,
Masami Hiramatsu, Michal Marek, Paolo Bonzini, Pekka Enberg,
Peter Zijlstra, pi3orama, Stephane Eranian, Sukadev Bhattiprolu,
Wang Nan, Zefan Li, Arnaldo Carvalho de Melo
On Mon, Jun 20, 2016 at 7:18 PM, Namhyung Kim <namhyung@kernel.org> wrote:
>
> Hi Arnaldo,
>
> On Mon, Jun 20, 2016 at 07:23:20PM -0300, Arnaldo Carvalho de Melo wrote:
> > Hi Ingo,
> >
> > Please consider pulling,
> >
> > - Arnaldo
> >
> > The following changes since commit 02469a95096a549508c5adf61d84a1d72851c85b:
> >
> > Merge tag 'perf-core-for-mingo-20160615' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-06-16 10:27:35 +0200)
> >
> > are available in the git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160620
> >
> > for you to fetch changes up to 2a0a7c72702bac1b87cd4d49196a334483386fab:
> >
> > perf script: Add stackcollapse.py script (2016-06-20 17:50:39 -0300)
> >
> > ----------------------------------------------------------------
> > perf/core improvements and fixes:
> >
> > New features:
> >
> > . Add --dry-run option to 'perf record' to check if command line options can be
> > parsed, but not doing any recording (Wang Nan)
> >
> > . Allow dumping the object files generated by llvm when processing eBPF
> > scriptlet events (Wang Nan)
> >
> > - Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini)
>
> I think this is already done by '-g folded'. Please see:
>
> http://www.brendangregg.com/blog/2016-04-30/linux-perf-folded.html
>
Pretty much. Two similar solutions were developed around the same
time. Although I have to use some awk to get "perf -g folded" in the
exact right format, and stackcollapse-perf.py does that directly.
Brendan
Brendan Gregg, Senior Performance Architect, Netflix
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-06-20 22:23 Arnaldo Carvalho de Melo
@ 2016-06-21 2:18 ` Namhyung Kim
2016-06-21 3:11 ` Brendan Gregg
0 siblings, 1 reply; 57+ messages in thread
From: Namhyung Kim @ 2016-06-21 2:18 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: Ingo Molnar, linux-kernel, Adrian Hunter, Alexander Shishkin,
Alexei Starovoitov, Andi Kleen, Brendan Gregg, David Ahern,
Ekaterina Tumanova, He Kuang, Jean Delvare, Jiri Olsa,
Josh Poimboeuf, Kan Liang, linux-kbuild, Masami Hiramatsu,
Michal Marek, Paolo Bonzini, Pekka Enberg, Peter Zijlstra,
pi3orama, Stephane Eranian, Sukadev Bhattiprolu, Wang Nan,
Zefan Li, Arnaldo Carvalho de Melo
Hi Arnaldo,
On Mon, Jun 20, 2016 at 07:23:20PM -0300, Arnaldo Carvalho de Melo wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit 02469a95096a549508c5adf61d84a1d72851c85b:
>
> Merge tag 'perf-core-for-mingo-20160615' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-06-16 10:27:35 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160620
>
> for you to fetch changes up to 2a0a7c72702bac1b87cd4d49196a334483386fab:
>
> perf script: Add stackcollapse.py script (2016-06-20 17:50:39 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> New features:
>
> . Add --dry-run option to 'perf record' to check if command line options can be
> parsed, but not doing any recording (Wang Nan)
>
> . Allow dumping the object files generated by llvm when processing eBPF
> scriptlet events (Wang Nan)
>
> - Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini)
I think this is already done by '-g folded'. Please see:
http://www.brendangregg.com/blog/2016-04-30/linux-perf-folded.html
Thanks,
Namhyung
>
> Documentation:
>
> . Fix 'perf script' documentation of '-f' when it should be '-F' (Adrian Hunter)
>
> Infrastructure:
>
> - Fix write_backwards fallback when using a new tool on older kernels
> without support for this feature (Arnaldo Carvalho de Melo)
>
> - Find vdso file in cross-platform perf.data file processing scenarios (He Kuang)
>
> - Remove some leftovers from the initial codebase copying from git
> (Arnaldo Carvalho de Melo)
>
> - List libelf-devel as an alternative, as this is how the libelf
> development package is called on OpenSuSE (Jean Delvare)
>
> - Rename __hists__add_entry to hists__add_entry (Jiri Olsa)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Adrian Hunter (1):
> perf script: Fix documentation of '-f' when it should be '-F'
>
> Arnaldo Carvalho de Melo (3):
> perf tools: Remove some unused functions
> perf tools: Remove --perf-dir and --work-dir
> perf evsel: Fix write_backwards fallback
>
> He Kuang (1):
> perf tools: Find vdso with the consider of cross-platform
>
> Jean Delvare (1):
> kbuild: List libelf-devel as an alternative
>
> Jiri Olsa (1):
> perf hists: Rename __hists__add_entry to hists__add_entry
>
> Paolo Bonzini (1):
> perf script: Add stackcollapse.py script
>
> Wang Nan (2):
> perf llvm: Allow dump llvm output object file using llvm.dump-obj
> perf record: Add --dry-run option to check cmdline options
>
> Makefile | 2 +-
> tools/perf/Documentation/perf-record.txt | 7 ++
> tools/perf/Documentation/perf-script.txt | 20 ++--
> tools/perf/builtin-annotate.c | 2 +-
> tools/perf/builtin-diff.c | 12 +-
> tools/perf/builtin-record.c | 7 ++
> tools/perf/config/Makefile | 2 +-
> tools/perf/perf.c | 36 ------
> tools/perf/scripts/python/bin/stackcollapse-record | 8 ++
> tools/perf/scripts/python/bin/stackcollapse-report | 3 +
> tools/perf/scripts/python/stackcollapse.py | 127 +++++++++++++++++++++
> tools/perf/tests/hists_link.c | 4 +-
> tools/perf/util/cache.h | 9 --
> tools/perf/util/config.c | 2 +-
> tools/perf/util/evsel.c | 23 ++--
> tools/perf/util/hist.c | 34 +++---
> tools/perf/util/hist.h | 14 +--
> tools/perf/util/llvm-utils.c | 42 +++++++
> tools/perf/util/llvm-utils.h | 5 +
> tools/perf/util/path.c | 65 +----------
> tools/perf/util/vdso.c | 40 ++++++-
> 21 files changed, 288 insertions(+), 176 deletions(-)
> create mode 100755 tools/perf/scripts/python/bin/stackcollapse-record
> create mode 100755 tools/perf/scripts/python/bin/stackcollapse-report
> create mode 100755 tools/perf/scripts/python/stackcollapse.py
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2016-06-20 22:23 Arnaldo Carvalho de Melo
2016-06-21 2:18 ` Namhyung Kim
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-06-20 22:23 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexander Shishkin, Alexei Starovoitov, Andi Kleen,
Brendan Gregg, David Ahern, Ekaterina Tumanova, He Kuang,
Jean Delvare, Jiri Olsa, Josh Poimboeuf, Kan Liang, linux-kbuild,
Masami Hiramatsu, Michal Marek, Namhyung Kim, Paolo Bonzini,
Pekka Enberg, Peter Zijlstra, pi3orama, Stephane Eranian,
Sukadev Bhattiprolu, Wang Nan, Zefan Li,
Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 02469a95096a549508c5adf61d84a1d72851c85b:
Merge tag 'perf-core-for-mingo-20160615' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-06-16 10:27:35 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160620
for you to fetch changes up to 2a0a7c72702bac1b87cd4d49196a334483386fab:
perf script: Add stackcollapse.py script (2016-06-20 17:50:39 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
New features:
. Add --dry-run option to 'perf record' to check if command line options can be
parsed, but not doing any recording (Wang Nan)
. Allow dumping the object files generated by llvm when processing eBPF
scriptlet events (Wang Nan)
- Add stackcollapse.py script to help generating flame graphs (Paolo Bonzini)
Documentation:
. Fix 'perf script' documentation of '-f' when it should be '-F' (Adrian Hunter)
Infrastructure:
- Fix write_backwards fallback when using a new tool on older kernels
without support for this feature (Arnaldo Carvalho de Melo)
- Find vdso file in cross-platform perf.data file processing scenarios (He Kuang)
- Remove some leftovers from the initial codebase copying from git
(Arnaldo Carvalho de Melo)
- List libelf-devel as an alternative, as this is how the libelf
development package is called on OpenSuSE (Jean Delvare)
- Rename __hists__add_entry to hists__add_entry (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (1):
perf script: Fix documentation of '-f' when it should be '-F'
Arnaldo Carvalho de Melo (3):
perf tools: Remove some unused functions
perf tools: Remove --perf-dir and --work-dir
perf evsel: Fix write_backwards fallback
He Kuang (1):
perf tools: Find vdso with the consider of cross-platform
Jean Delvare (1):
kbuild: List libelf-devel as an alternative
Jiri Olsa (1):
perf hists: Rename __hists__add_entry to hists__add_entry
Paolo Bonzini (1):
perf script: Add stackcollapse.py script
Wang Nan (2):
perf llvm: Allow dump llvm output object file using llvm.dump-obj
perf record: Add --dry-run option to check cmdline options
Makefile | 2 +-
tools/perf/Documentation/perf-record.txt | 7 ++
tools/perf/Documentation/perf-script.txt | 20 ++--
tools/perf/builtin-annotate.c | 2 +-
tools/perf/builtin-diff.c | 12 +-
tools/perf/builtin-record.c | 7 ++
tools/perf/config/Makefile | 2 +-
tools/perf/perf.c | 36 ------
tools/perf/scripts/python/bin/stackcollapse-record | 8 ++
tools/perf/scripts/python/bin/stackcollapse-report | 3 +
tools/perf/scripts/python/stackcollapse.py | 127 +++++++++++++++++++++
tools/perf/tests/hists_link.c | 4 +-
tools/perf/util/cache.h | 9 --
tools/perf/util/config.c | 2 +-
tools/perf/util/evsel.c | 23 ++--
tools/perf/util/hist.c | 34 +++---
tools/perf/util/hist.h | 14 +--
tools/perf/util/llvm-utils.c | 42 +++++++
tools/perf/util/llvm-utils.h | 5 +
tools/perf/util/path.c | 65 +----------
tools/perf/util/vdso.c | 40 ++++++-
21 files changed, 288 insertions(+), 176 deletions(-)
create mode 100755 tools/perf/scripts/python/bin/stackcollapse-record
create mode 100755 tools/perf/scripts/python/bin/stackcollapse-report
create mode 100755 tools/perf/scripts/python/stackcollapse.py
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2016-05-25 21:34 Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-05-25 21:34 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexander Shishkin, Alexei Starovoitov, Andi Kleen,
Brendan Gregg, David Ahern, Frederic Weisbecker, He Kuang,
Jiri Olsa, Linus Torvalds, Masami Hiramatsu, Milian Wolff,
Namhyung Kim, Peter Zijlstra, pi3orama, Stephane Eranian,
Thomas Gleixner, Vince Weaver, Wang Nan, Zefan Li,
Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 275ae411e56f8f900fa364da29c4706f9af4e1f3:
perf/x86/intel/rapl: Fix pmus free during cleanup (2016-05-25 10:56:43 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160525
for you to fetch changes up to 83e1e314baf9a1424bf2f50953ed7d50612763c4:
tools: Pass arg to fdarray__filter's call back function (2016-05-25 17:27:25 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible/kernel ABI:
- Per event callchain limit: Recently we introduced a sysctl to tune the
max-stack for all events for which callchains were requested:
$ sysctl kernel.perf_event_max_stack
kernel.perf_event_max_stack = 127
Now this patch introduces a way to configure this per event, i.e. this
becomes possible:
$ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a
allowing finer tuning of how much buffer space callchains use.
This uses an u16 from the reserved space at the end, leaving another
u16 for future use.
There has been interest in even finer tuning, namely to control the
max stack for kernel and userspace callchains separately. Further
discussion is needed, we may for instance use the remaining u16 for
that and when it is present, assume that the sample_max_stack introduced
in this patch applies for the kernel, and the u16 left is used for
limiting the userspace callchain. (Arnaldo Carvalho de Melo)
- Fix kptr_restrict=2 related 'perf record' segfault (Wang Nan)
Infrastructure;
- Adopt get_main_thread from db-export.c (Andi Kleen)
- More prep work for backward ring buffer support (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Andi Kleen (1):
perf thread: Adopt get_main_thread from db-export.c
Arnaldo Carvalho de Melo (2):
perf core: Per event callchain limit
perf tools: Per event max-stack settings
Wang Nan (7):
perf symbols: Check kptr_restrict for root
perf record: Fix crash when kptr is restricted
perf record: Robustify perf_event__synth_time_conv()
perf evlist: Don't poll and mmap overwritable events
perf evlist: Check 'base' pointer before checking refcnt when put a mmap
perf evlist: Choose correct reading direction according to evlist->backward
tools: Pass arg to fdarray__filter's call back function
include/linux/perf_event.h | 2 +-
include/uapi/linux/perf_event.h | 6 +++++-
kernel/bpf/stackmap.c | 2 +-
kernel/events/callchain.c | 14 ++++++++++++--
kernel/events/core.c | 5 ++++-
tools/lib/api/fd/array.c | 5 +++--
tools/lib/api/fd/array.h | 3 ++-
tools/perf/arch/x86/util/tsc.c | 2 ++
tools/perf/builtin-record.c | 9 ++++++++-
tools/perf/tests/fdarray.c | 8 ++++----
tools/perf/util/callchain.h | 1 +
tools/perf/util/db-export.c | 13 +------------
tools/perf/util/event.c | 2 ++
tools/perf/util/evlist.c | 43 ++++++++++++++++++++++++++++++++---------
tools/perf/util/evlist.h | 2 ++
tools/perf/util/evsel.c | 16 +++++++++++++--
tools/perf/util/evsel.h | 2 ++
tools/perf/util/parse-events.c | 8 ++++++++
tools/perf/util/parse-events.h | 1 +
tools/perf/util/parse-events.l | 1 +
tools/perf/util/session.c | 2 ++
tools/perf/util/symbol.c | 16 +++++++--------
tools/perf/util/thread.c | 11 +++++++++++
tools/perf/util/thread.h | 2 ++
24 files changed, 131 insertions(+), 45 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-04-01 21:56 Arnaldo Carvalho de Melo
@ 2016-04-06 6:47 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2016-04-06 6:47 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, Alexander Shishkin, Andi Kleen,
David Ahern, He Kuang, Jiri Olsa, Josh Poimboeuf, Kan Liang,
Milian Wolff, Namhyung Kim, Peter Zijlstra, pi3orama,
Stephane Eranian, Sukadev Bhattiprolu, Wang Nan,
Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit d1b26c70246bc72922ae61d9f972d5c2588409e7:
>
> perf/ring_buffer: Prepare writing into the ring-buffer from the end (2016-03-31 10:30:49 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160401
>
> for you to fetch changes up to d37ba880598654fda10b312331377cdca3edd574:
>
> perf bpf: Add sample types for 'bpf-output' event (2016-04-01 18:46:25 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> User visible:
>
> - Do not use events that don't have timestamps when setting 'perf trace's
> base timestamp, fixing up the timestamp column for syscalls (Arnaldo Carvalho de Melo)
>
> - Make the 'bpf-output' sample_type be the same as tracepoint's, fixing up
> 'perf trace's timestamp column for bpf events (Wang Nan)
>
> - Fix PMU term format max value calculation (Kan Liang)
>
> - Pretty print 'seccomp', 'getrandom' syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
>
> Infrastructure:
>
> - Add support for using TSC as an ARCH timestamp when synthesizing
> JIT records (Adrian Hunter)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Adrian Hunter (3):
> perf tools: Add time conversion event
> perf jit: Add support for using TSC as a timestamp
> perf intel-pt/bts: Define JITDUMP_USE_ARCH_TIMESTAMP
>
> Arnaldo Carvalho de Melo (5):
> perf trace: Do not process PERF_RECORD_LOST twice
> perf trace: Pretty print seccomp() args
> perf trace: Pretty print getrandom() args
> perf trace: Introduce function to set the base timestamp
> perf trace: Don't set the base timestamp using events without PERF_SAMPLE_TIME
>
> Kan Liang (1):
> perf tools: Fix PMU term format max value calculation
>
> Wang Nan (1):
> perf bpf: Add sample types for 'bpf-output' event
>
> tools/perf/arch/x86/util/intel-bts.c | 5 ++
> tools/perf/arch/x86/util/intel-pt.c | 5 ++
> tools/perf/arch/x86/util/tsc.c | 32 +++++++++++-
> tools/perf/arch/x86/util/tsc.h | 17 -------
> tools/perf/builtin-inject.c | 1 +
> tools/perf/builtin-record.c | 15 ++++++
> tools/perf/builtin-trace.c | 99 ++++++++++++++++++++++++++++++++++--
> tools/perf/jvmti/jvmti_agent.c | 43 +++++++++++++++-
> tools/perf/util/Build | 3 +-
> tools/perf/util/event.c | 1 +
> tools/perf/util/event.h | 9 ++++
> tools/perf/util/evsel.c | 3 +-
> tools/perf/util/jitdump.c | 37 ++++++++++++--
> tools/perf/util/jitdump.h | 3 ++
> tools/perf/util/pmu.c | 13 +++--
> tools/perf/util/session.c | 6 +++
> tools/perf/util/session.h | 1 +
> tools/perf/util/tool.h | 1 +
> tools/perf/util/tsc.h | 21 +++++++-
> 19 files changed, 274 insertions(+), 41 deletions(-)
> delete mode 100644 tools/perf/arch/x86/util/tsc.h
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2016-04-01 21:56 Arnaldo Carvalho de Melo
2016-04-06 6:47 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-04-01 21:56 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexander Shishkin, Andi Kleen, David Ahern, He Kuang, Jiri Olsa,
Josh Poimboeuf, Kan Liang, Milian Wolff, Namhyung Kim,
Peter Zijlstra, pi3orama, Stephane Eranian, Sukadev Bhattiprolu,
Wang Nan, Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit d1b26c70246bc72922ae61d9f972d5c2588409e7:
perf/ring_buffer: Prepare writing into the ring-buffer from the end (2016-03-31 10:30:49 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-20160401
for you to fetch changes up to d37ba880598654fda10b312331377cdca3edd574:
perf bpf: Add sample types for 'bpf-output' event (2016-04-01 18:46:25 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- Do not use events that don't have timestamps when setting 'perf trace's
base timestamp, fixing up the timestamp column for syscalls (Arnaldo Carvalho de Melo)
- Make the 'bpf-output' sample_type be the same as tracepoint's, fixing up
'perf trace's timestamp column for bpf events (Wang Nan)
- Fix PMU term format max value calculation (Kan Liang)
- Pretty print 'seccomp', 'getrandom' syscalls in 'perf trace' (Arnaldo Carvalho de Melo)
Infrastructure:
- Add support for using TSC as an ARCH timestamp when synthesizing
JIT records (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (3):
perf tools: Add time conversion event
perf jit: Add support for using TSC as a timestamp
perf intel-pt/bts: Define JITDUMP_USE_ARCH_TIMESTAMP
Arnaldo Carvalho de Melo (5):
perf trace: Do not process PERF_RECORD_LOST twice
perf trace: Pretty print seccomp() args
perf trace: Pretty print getrandom() args
perf trace: Introduce function to set the base timestamp
perf trace: Don't set the base timestamp using events without PERF_SAMPLE_TIME
Kan Liang (1):
perf tools: Fix PMU term format max value calculation
Wang Nan (1):
perf bpf: Add sample types for 'bpf-output' event
tools/perf/arch/x86/util/intel-bts.c | 5 ++
tools/perf/arch/x86/util/intel-pt.c | 5 ++
tools/perf/arch/x86/util/tsc.c | 32 +++++++++++-
tools/perf/arch/x86/util/tsc.h | 17 -------
tools/perf/builtin-inject.c | 1 +
tools/perf/builtin-record.c | 15 ++++++
tools/perf/builtin-trace.c | 99 ++++++++++++++++++++++++++++++++++--
tools/perf/jvmti/jvmti_agent.c | 43 +++++++++++++++-
tools/perf/util/Build | 3 +-
tools/perf/util/event.c | 1 +
tools/perf/util/event.h | 9 ++++
tools/perf/util/evsel.c | 3 +-
tools/perf/util/jitdump.c | 37 ++++++++++++--
tools/perf/util/jitdump.h | 3 ++
tools/perf/util/pmu.c | 13 +++--
tools/perf/util/session.c | 6 +++
tools/perf/util/session.h | 1 +
tools/perf/util/tool.h | 1 +
tools/perf/util/tsc.h | 21 +++++++-
19 files changed, 274 insertions(+), 41 deletions(-)
delete mode 100644 tools/perf/arch/x86/util/tsc.h
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2016-02-16 20:34 Arnaldo Carvalho de Melo
@ 2016-02-17 7:39 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2016-02-17 7:39 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, Andi Kleen, David Ahern, Jiri Olsa,
Kan Liang, Namhyung Kim, Peter Zijlstra, Stephane Eranian,
Wang Nan, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit fe7a2eaa71c55aadbf95d01d32df8dccc0db0646:
>
> Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-02-16 08:45:56 +0100)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to cb110f471025f3278978aaccb18f3164ea2b8189:
>
> perf stat: Move noise/running printing into printout (2016-02-16 17:13:02 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> User visible:
>
> - Make 'perf record' collect CPU cache info in the perf.data file header:
>
> $ perf record usleep 1
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
> $ perf report --header-only -I | tail -10 | head -8
> # CPU cache info:
> # L1 Data 32K [0-1]
> # L1 Instruction 32K [0-1]
> # L1 Data 32K [2-3]
> # L1 Instruction 32K [2-3]
> # L2 Unified 256K [0-1]
> # L2 Unified 256K [2-3]
> # L3 Unified 4096K [0-3]
> $
>
> Will be used in 'perf c2c' and eventually in 'perf diff' to allow, for instance
> running the same workload in multiple machines and then when using 'diff' show
> the hardware difference. (Jiri Olsa)
>
> - 'perf stat' now shows shadow metrics (insn per cycle, etc) in
> interval mode too. E.g:
>
> # perf stat -I 1000 -e instructions,cycles sleep 1
> # time counts unit events
> 1.000215928 519,620 instructions # 0.69 insn per cycle
> 1.000215928 752,003 cycles
> <SNIP>
>
> Infrastructure:
>
> - libapi now can also use pr_{warning,info,debug}() and that can be
> set by tools using it (Jiri Olsa)
>
> - libapi adopts filename__read_str() from perf, adds sysfs__read_str() (Jiri Olsa)
>
> - Add check for java alternatives cmd in jvmti Makefile, so that it manages
> to automatically find the right path for the JDK devel files in Ubuntu like
> systems in addition to Fedora like ones (Stephane Eranian)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Andi Kleen (3):
> perf stat: Abstract stat metrics printing
> perf stat: Add support for metrics in interval mode
> perf stat: Move noise/running printing into printout
>
> Arnaldo Carvalho de Melo (1):
> perf debug: Rename __eprintf(va_list args) to veprintf
>
> Jiri Olsa (5):
> tools lib api: Add debug output support
> tools lib api fs: Adopt filename__read_str from perf
> tools lib api fs: Add sysfs__read_str function
> perf tools: Initialize libapi debug output
> perf tools: Add perf data cache feature
>
> Stephane Eranian (1):
> perf jvmti: Add check for java alternatives cmd in Makefile
>
> tools/lib/api/Build | 1 +
> tools/lib/api/Makefile | 1 +
> tools/lib/api/debug-internal.h | 20 +++
> tools/lib/api/debug.c | 28 +++++
> tools/lib/api/debug.h | 10 ++
> tools/lib/api/fs/fs.c | 64 ++++++++++
> tools/lib/api/fs/fs.h | 3 +
> tools/perf/builtin-stat.c | 202 +++++++++++++++---------------
> tools/perf/jvmti/Makefile | 6 +-
> tools/perf/perf.c | 2 +
> tools/perf/util/debug.c | 36 ++++--
> tools/perf/util/debug.h | 1 +
> tools/perf/util/env.c | 13 ++
> tools/perf/util/env.h | 15 +++
> tools/perf/util/header.c | 270 +++++++++++++++++++++++++++++++++++++++++
> tools/perf/util/header.h | 1 +
> tools/perf/util/stat-shadow.c | 211 +++++++++++++++++---------------
> tools/perf/util/stat.h | 15 ++-
> tools/perf/util/trace-event.c | 1 +
> tools/perf/util/util.c | 48 --------
> tools/perf/util/util.h | 1 -
> 21 files changed, 694 insertions(+), 255 deletions(-)
> create mode 100644 tools/lib/api/debug-internal.h
> create mode 100644 tools/lib/api/debug.c
> create mode 100644 tools/lib/api/debug.h
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2016-02-16 20:34 Arnaldo Carvalho de Melo
2016-02-17 7:39 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2016-02-16 20:34 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, David Ahern, Jiri Olsa, Kan Liang, Namhyung Kim,
Peter Zijlstra, Stephane Eranian, Wang Nan,
Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit fe7a2eaa71c55aadbf95d01d32df8dccc0db0646:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2016-02-16 08:45:56 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to cb110f471025f3278978aaccb18f3164ea2b8189:
perf stat: Move noise/running printing into printout (2016-02-16 17:13:02 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- Make 'perf record' collect CPU cache info in the perf.data file header:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
$ perf report --header-only -I | tail -10 | head -8
# CPU cache info:
# L1 Data 32K [0-1]
# L1 Instruction 32K [0-1]
# L1 Data 32K [2-3]
# L1 Instruction 32K [2-3]
# L2 Unified 256K [0-1]
# L2 Unified 256K [2-3]
# L3 Unified 4096K [0-3]
$
Will be used in 'perf c2c' and eventually in 'perf diff' to allow, for instance
running the same workload in multiple machines and then when using 'diff' show
the hardware difference. (Jiri Olsa)
- 'perf stat' now shows shadow metrics (insn per cycle, etc) in
interval mode too. E.g:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.000215928 519,620 instructions # 0.69 insn per cycle
1.000215928 752,003 cycles
<SNIP>
Infrastructure:
- libapi now can also use pr_{warning,info,debug}() and that can be
set by tools using it (Jiri Olsa)
- libapi adopts filename__read_str() from perf, adds sysfs__read_str() (Jiri Olsa)
- Add check for java alternatives cmd in jvmti Makefile, so that it manages
to automatically find the right path for the JDK devel files in Ubuntu like
systems in addition to Fedora like ones (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Andi Kleen (3):
perf stat: Abstract stat metrics printing
perf stat: Add support for metrics in interval mode
perf stat: Move noise/running printing into printout
Arnaldo Carvalho de Melo (1):
perf debug: Rename __eprintf(va_list args) to veprintf
Jiri Olsa (5):
tools lib api: Add debug output support
tools lib api fs: Adopt filename__read_str from perf
tools lib api fs: Add sysfs__read_str function
perf tools: Initialize libapi debug output
perf tools: Add perf data cache feature
Stephane Eranian (1):
perf jvmti: Add check for java alternatives cmd in Makefile
tools/lib/api/Build | 1 +
tools/lib/api/Makefile | 1 +
tools/lib/api/debug-internal.h | 20 +++
tools/lib/api/debug.c | 28 +++++
tools/lib/api/debug.h | 10 ++
tools/lib/api/fs/fs.c | 64 ++++++++++
tools/lib/api/fs/fs.h | 3 +
tools/perf/builtin-stat.c | 202 +++++++++++++++---------------
tools/perf/jvmti/Makefile | 6 +-
tools/perf/perf.c | 2 +
tools/perf/util/debug.c | 36 ++++--
tools/perf/util/debug.h | 1 +
tools/perf/util/env.c | 13 ++
tools/perf/util/env.h | 15 +++
tools/perf/util/header.c | 270 +++++++++++++++++++++++++++++++++++++++++
tools/perf/util/header.h | 1 +
tools/perf/util/stat-shadow.c | 211 +++++++++++++++++---------------
tools/perf/util/stat.h | 15 ++-
tools/perf/util/trace-event.c | 1 +
tools/perf/util/util.c | 48 --------
tools/perf/util/util.h | 1 -
21 files changed, 694 insertions(+), 255 deletions(-)
create mode 100644 tools/lib/api/debug-internal.h
create mode 100644 tools/lib/api/debug.c
create mode 100644 tools/lib/api/debug.h
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-11-28 9:50 ` Ingo Molnar
@ 2015-11-29 13:16 ` Namhyung Kim
0 siblings, 0 replies; 57+ messages in thread
From: Namhyung Kim @ 2015-11-29 13:16 UTC (permalink / raw)
To: Ingo Molnar
Cc: Arnaldo Carvalho de Melo, linux-kernel, Arnaldo Carvalho de Melo,
Adrian Hunter, Alexei Starovoitov, David Ahern, He Kuang,
Jiri Olsa, Masami Hiramatsu, Michael Petlan, Peter Zijlstra,
pi3orama, Wang Nan, Zefan Li
Hi Ingo,
On Sat, Nov 28, 2015 at 10:50:19AM +0100, Ingo Molnar wrote:
>
> * Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
>
> > From: Arnaldo Carvalho de Melo <acme@redhat.com>
> >
> > Hi Ingo,
> >
> > Please consider applying,
> >
> > - Arnaldo
> >
> > The following changes since commit 3f3b1a46bfdbce97dd3f9594d8a95db82baa554b:
> >
> > Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-11-27 08:28:44 +0100)
> >
> > are available in the git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
> >
> > for you to fetch changes up to 0bb93490170477224f8bd4cc9ce8920517461643:
> >
> > perf bpf: Rename bpf config to program config (2015-11-27 22:00:46 -0300)
> >
> > ----------------------------------------------------------------
> > perf/core improvements and fixes:
> >
> > User visible:
> >
> > - Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
> > in an array used just for printing available events, robustify the code
> > involved (Arnaldo Carvalho de Melo)
> >
> > - 'perf test unwind' should create kernel maps, now that entry works and the
> > test passes (Jiri Olsa)
> >
> > - Fix showing the running kernel build id in 'perf buildid-list' (Michael Petlan)
> >
> > - Fix command line symbol filtering in 'perf report' (Namhyung Kim)
> >
> > Infrastructure:
> >
> > - Extract and collect map info from BPF object files in libbpf (Wang Nan)
> >
> > Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
> >
> > ----------------------------------------------------------------
> > Arnaldo Carvalho de Melo (2):
> > perf list: Add support for PERF_COUNT_SW_BPF_OUT
> > perf list: Robustify event printing routine
> >
> > Jiri Olsa (1):
> > perf test: 'unwind' test should create kernel maps
> >
> > Michael Petlan (1):
> > perf buildid-list: Show running kernel build id fix
> >
> > Namhyung Kim (3):
> > perf report: Show error message when processing sample fails
> > perf hists: Do not skip elided fields when processing samples
> > perf hists browser: Update nr entries regardless of min percent
> >
> > Wang Nan (3):
> > tools lib bpf: Collect map definition in bpf_object
> > tools lib bpf: Extract and collect map names from BPF object file
> > perf bpf: Rename bpf config to program config
> >
> > tools/lib/bpf/libbpf.c | 252 ++++++++++++++++++++++++++++++----------
> > tools/lib/bpf/libbpf.h | 24 ++++
> > tools/perf/builtin-report.c | 12 +-
> > tools/perf/tests/dwarf-unwind.c | 5 +
> > tools/perf/ui/browsers/hists.c | 5 +-
> > tools/perf/util/bpf-loader.c | 65 +++++------
> > tools/perf/util/bpf-loader.h | 2 +-
> > tools/perf/util/build-id.c | 2 +-
> > tools/perf/util/hist.c | 6 -
> > tools/perf/util/parse-events.c | 6 +-
> > 10 files changed, 268 insertions(+), 111 deletions(-)
>
> Pulled, thanks a lot Arnaldo!
>
> Should any of the above fixes be cherry-picked over into perf/urgent, or are these
> all new regressions?
At least my changes should go into perf/urgent and probably stable too.
Thanks,
Namhyung
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-11-28 1:22 Arnaldo Carvalho de Melo
@ 2015-11-28 9:50 ` Ingo Molnar
2015-11-29 13:16 ` Namhyung Kim
0 siblings, 1 reply; 57+ messages in thread
From: Ingo Molnar @ 2015-11-28 9:50 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexei Starovoitov, David Ahern, He Kuang, Jiri Olsa,
Masami Hiramatsu, Michael Petlan, Namhyung Kim, Peter Zijlstra,
pi3orama, Wang Nan, Zefan Li
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> Hi Ingo,
>
> Please consider applying,
>
> - Arnaldo
>
> The following changes since commit 3f3b1a46bfdbce97dd3f9594d8a95db82baa554b:
>
> Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-11-27 08:28:44 +0100)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to 0bb93490170477224f8bd4cc9ce8920517461643:
>
> perf bpf: Rename bpf config to program config (2015-11-27 22:00:46 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> User visible:
>
> - Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
> in an array used just for printing available events, robustify the code
> involved (Arnaldo Carvalho de Melo)
>
> - 'perf test unwind' should create kernel maps, now that entry works and the
> test passes (Jiri Olsa)
>
> - Fix showing the running kernel build id in 'perf buildid-list' (Michael Petlan)
>
> - Fix command line symbol filtering in 'perf report' (Namhyung Kim)
>
> Infrastructure:
>
> - Extract and collect map info from BPF object files in libbpf (Wang Nan)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Arnaldo Carvalho de Melo (2):
> perf list: Add support for PERF_COUNT_SW_BPF_OUT
> perf list: Robustify event printing routine
>
> Jiri Olsa (1):
> perf test: 'unwind' test should create kernel maps
>
> Michael Petlan (1):
> perf buildid-list: Show running kernel build id fix
>
> Namhyung Kim (3):
> perf report: Show error message when processing sample fails
> perf hists: Do not skip elided fields when processing samples
> perf hists browser: Update nr entries regardless of min percent
>
> Wang Nan (3):
> tools lib bpf: Collect map definition in bpf_object
> tools lib bpf: Extract and collect map names from BPF object file
> perf bpf: Rename bpf config to program config
>
> tools/lib/bpf/libbpf.c | 252 ++++++++++++++++++++++++++++++----------
> tools/lib/bpf/libbpf.h | 24 ++++
> tools/perf/builtin-report.c | 12 +-
> tools/perf/tests/dwarf-unwind.c | 5 +
> tools/perf/ui/browsers/hists.c | 5 +-
> tools/perf/util/bpf-loader.c | 65 +++++------
> tools/perf/util/bpf-loader.h | 2 +-
> tools/perf/util/build-id.c | 2 +-
> tools/perf/util/hist.c | 6 -
> tools/perf/util/parse-events.c | 6 +-
> 10 files changed, 268 insertions(+), 111 deletions(-)
Pulled, thanks a lot Arnaldo!
Should any of the above fixes be cherry-picked over into perf/urgent, or are these
all new regressions?
Thanks,
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2015-11-28 1:22 Arnaldo Carvalho de Melo
2015-11-28 9:50 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-11-28 1:22 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexei Starovoitov, David Ahern, He Kuang, Jiri Olsa,
Masami Hiramatsu, Michael Petlan, Namhyung Kim, Peter Zijlstra,
pi3orama, Wang Nan, Zefan Li
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Hi Ingo,
Please consider applying,
- Arnaldo
The following changes since commit 3f3b1a46bfdbce97dd3f9594d8a95db82baa554b:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-11-27 08:28:44 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to 0bb93490170477224f8bd4cc9ce8920517461643:
perf bpf: Rename bpf config to program config (2015-11-27 22:00:46 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- Fix 'perf list' segfault due to lack of support for PERF_CONF_SW_BPF_OUTPUT
in an array used just for printing available events, robustify the code
involved (Arnaldo Carvalho de Melo)
- 'perf test unwind' should create kernel maps, now that entry works and the
test passes (Jiri Olsa)
- Fix showing the running kernel build id in 'perf buildid-list' (Michael Petlan)
- Fix command line symbol filtering in 'perf report' (Namhyung Kim)
Infrastructure:
- Extract and collect map info from BPF object files in libbpf (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (2):
perf list: Add support for PERF_COUNT_SW_BPF_OUT
perf list: Robustify event printing routine
Jiri Olsa (1):
perf test: 'unwind' test should create kernel maps
Michael Petlan (1):
perf buildid-list: Show running kernel build id fix
Namhyung Kim (3):
perf report: Show error message when processing sample fails
perf hists: Do not skip elided fields when processing samples
perf hists browser: Update nr entries regardless of min percent
Wang Nan (3):
tools lib bpf: Collect map definition in bpf_object
tools lib bpf: Extract and collect map names from BPF object file
perf bpf: Rename bpf config to program config
tools/lib/bpf/libbpf.c | 252 ++++++++++++++++++++++++++++++----------
tools/lib/bpf/libbpf.h | 24 ++++
tools/perf/builtin-report.c | 12 +-
tools/perf/tests/dwarf-unwind.c | 5 +
tools/perf/ui/browsers/hists.c | 5 +-
tools/perf/util/bpf-loader.c | 65 +++++------
tools/perf/util/bpf-loader.h | 2 +-
tools/perf/util/build-id.c | 2 +-
tools/perf/util/hist.c | 6 -
tools/perf/util/parse-events.c | 6 +-
10 files changed, 268 insertions(+), 111 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-08-28 18:06 Arnaldo Carvalho de Melo
@ 2015-08-31 8:28 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2015-08-31 8:28 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo, Carvalho, de, Adrian Hunter, Andi Kleen,
Andy Lutomirski, Borislav Petkov, David Ahern,
Frederic Weisbecker, Hemant Kumar, Jiri Olsa, Kan Liang,
Mark Drayton, Mark Rutland, Masami Hiramatsu, Matt Fleming,
Mel Gorman, Namhyung Kim, Paul Mackerras, Peter Zijlstra,
Raphael Beamonte, Stephane Eranian, Steven Rostedt, Tony Jones,
Vlastimil Babka, Yannick Brosseau, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@kernel.org
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit d1ee8bc195ffedbf91af0245a2406d6ebd2578f8:
>
> Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-08-28 08:22:02 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to 2c07144dfce366e21465cc7b0ada9f0b6dc7b7ed:
>
> perf evlist: Add backpointer for perf_env to evlist (2015-08-28 14:54:14 -0300)
>
> ----------------------------------------------------------------
> perf/core improvement and fixes:
>
> User visible:
>
> - Add new compaction-times python script (Tony Jones)
>
> - Make the --[no-]-demangle/--[no-]-demangle-kernel command line
> options available in 'perf script' too (Mark Drayton)
>
> - Allow for negative numbers in libtraceevent's print format,
> fixing up misformatting in some tracepoints (Steven Rostedt)
>
> Infrastructure:
>
> - perf_env/perf_evlist changes to allow accessing the data
> structure with the environment where some perf data was
> collected in functions not necessarily related to perf.data
> file processing (Kan Liang)
>
> - Cleanups for the tracepoint definition location paths routines (Jiri Olsa)
>
> - Introduce sysfs/filename__sprintf_build_id, removing code
> duplication (Masami Hiramatsu)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Arnaldo Carvalho de Melo (2):
> perf trace: Add header with copyright and background info
> perf evsel: Add a backpointer to the evlist a evsel is in
>
> Jiri Olsa (2):
> perf tools: Add tracing_path and remove unneeded functions
> perf tools: Do not change lib/api/fs/debugfs directly
>
> Kan Liang (2):
> perf tools: Rename perf_session_env to perf_env
> perf evlist: Add backpointer for perf_env to evlist
>
> Mark Drayton (1):
> perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
>
> Masami Hiramatsu (1):
> perf buildid: Introduce sysfs/filename__sprintf_build_id
>
> Steven Rostedt (1):
> tools lib traceeveent: Allow for negative numbers in print format
>
> Tony Jones (1):
> perf scripts python: Add new compaction-times script
>
> tools/lib/traceevent/event-parse.c | 1 +
> tools/perf/Documentation/perf-script.txt | 7 +
> tools/perf/arch/common.c | 4 +-
> tools/perf/arch/common.h | 2 +-
> tools/perf/builtin-buildid-cache.c | 14 +-
> tools/perf/builtin-buildid-list.c | 24 +-
> tools/perf/builtin-script.c | 5 +
> tools/perf/builtin-trace.c | 19 ++
> tools/perf/perf.c | 2 +-
> .../scripts/python/bin/compaction-times-record | 2 +
> .../scripts/python/bin/compaction-times-report | 4 +
> tools/perf/scripts/python/compaction-times.py | 311 +++++++++++++++++++++
> tools/perf/ui/browser.h | 4 +-
> tools/perf/ui/browsers/header.c | 2 +-
> tools/perf/ui/browsers/hists.c | 12 +-
> tools/perf/util/build-id.c | 32 +++
> tools/perf/util/build-id.h | 3 +
> tools/perf/util/evlist.c | 2 +
> tools/perf/util/evlist.h | 1 +
> tools/perf/util/evsel.c | 2 +
> tools/perf/util/evsel.h | 4 +
> tools/perf/util/header.c | 1 +
> tools/perf/util/header.h | 4 +-
> tools/perf/util/hist.h | 4 +-
> tools/perf/util/session.c | 2 +-
> tools/perf/util/symbol.c | 4 +-
> tools/perf/util/symbol.h | 4 +-
> tools/perf/util/util.c | 57 +---
> tools/perf/util/util.h | 2 +-
> 29 files changed, 433 insertions(+), 102 deletions(-)
> create mode 100644 tools/perf/scripts/python/bin/compaction-times-record
> create mode 100644 tools/perf/scripts/python/bin/compaction-times-report
> create mode 100644 tools/perf/scripts/python/compaction-times.py
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2015-08-28 18:06 Arnaldo Carvalho de Melo
2015-08-31 8:28 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-08-28 18:06 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo, Carvalho, de, Melo <acme,
Adrian Hunter, Andi Kleen, Andy Lutomirski, Borislav Petkov,
David Ahern, Frederic Weisbecker, Hemant Kumar, Jiri Olsa,
Kan Liang, Mark Drayton, Mark Rutland, Masami Hiramatsu,
Matt Fleming, Mel Gorman, Namhyung Kim, Paul Mackerras,
Peter Zijlstra, Raphael Beamonte, Stephane Eranian,
Steven Rostedt, Tony Jones, Vlastimil Babka, Yannick Brosseau,
Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@kernel.org
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit d1ee8bc195ffedbf91af0245a2406d6ebd2578f8:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-08-28 08:22:02 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to 2c07144dfce366e21465cc7b0ada9f0b6dc7b7ed:
perf evlist: Add backpointer for perf_env to evlist (2015-08-28 14:54:14 -0300)
----------------------------------------------------------------
perf/core improvement and fixes:
User visible:
- Add new compaction-times python script (Tony Jones)
- Make the --[no-]-demangle/--[no-]-demangle-kernel command line
options available in 'perf script' too (Mark Drayton)
- Allow for negative numbers in libtraceevent's print format,
fixing up misformatting in some tracepoints (Steven Rostedt)
Infrastructure:
- perf_env/perf_evlist changes to allow accessing the data
structure with the environment where some perf data was
collected in functions not necessarily related to perf.data
file processing (Kan Liang)
- Cleanups for the tracepoint definition location paths routines (Jiri Olsa)
- Introduce sysfs/filename__sprintf_build_id, removing code
duplication (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (2):
perf trace: Add header with copyright and background info
perf evsel: Add a backpointer to the evlist a evsel is in
Jiri Olsa (2):
perf tools: Add tracing_path and remove unneeded functions
perf tools: Do not change lib/api/fs/debugfs directly
Kan Liang (2):
perf tools: Rename perf_session_env to perf_env
perf evlist: Add backpointer for perf_env to evlist
Mark Drayton (1):
perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
Masami Hiramatsu (1):
perf buildid: Introduce sysfs/filename__sprintf_build_id
Steven Rostedt (1):
tools lib traceeveent: Allow for negative numbers in print format
Tony Jones (1):
perf scripts python: Add new compaction-times script
tools/lib/traceevent/event-parse.c | 1 +
tools/perf/Documentation/perf-script.txt | 7 +
tools/perf/arch/common.c | 4 +-
tools/perf/arch/common.h | 2 +-
tools/perf/builtin-buildid-cache.c | 14 +-
tools/perf/builtin-buildid-list.c | 24 +-
tools/perf/builtin-script.c | 5 +
tools/perf/builtin-trace.c | 19 ++
tools/perf/perf.c | 2 +-
.../scripts/python/bin/compaction-times-record | 2 +
.../scripts/python/bin/compaction-times-report | 4 +
tools/perf/scripts/python/compaction-times.py | 311 +++++++++++++++++++++
tools/perf/ui/browser.h | 4 +-
tools/perf/ui/browsers/header.c | 2 +-
tools/perf/ui/browsers/hists.c | 12 +-
tools/perf/util/build-id.c | 32 +++
tools/perf/util/build-id.h | 3 +
tools/perf/util/evlist.c | 2 +
tools/perf/util/evlist.h | 1 +
tools/perf/util/evsel.c | 2 +
tools/perf/util/evsel.h | 4 +
tools/perf/util/header.c | 1 +
tools/perf/util/header.h | 4 +-
tools/perf/util/hist.h | 4 +-
tools/perf/util/session.c | 2 +-
tools/perf/util/symbol.c | 4 +-
tools/perf/util/symbol.h | 4 +-
tools/perf/util/util.c | 57 +---
tools/perf/util/util.h | 2 +-
29 files changed, 433 insertions(+), 102 deletions(-)
create mode 100644 tools/perf/scripts/python/bin/compaction-times-record
create mode 100644 tools/perf/scripts/python/bin/compaction-times-report
create mode 100644 tools/perf/scripts/python/compaction-times.py
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-07-31 8:04 ` Ingo Molnar
@ 2015-07-31 13:30 ` Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-07-31 13:30 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Adrian Hunter, Andi Kleen, Borislav Petkov,
David Ahern, Frederic Weisbecker, Jaroslav Skarvada, Jeremy Eder,
Jiri Olsa, Kan Liang, Luiz Fernando Capitulino, Namhyung Kim,
Pawel Moll, Peter Zijlstra, Stephane Eranian
Em Fri, Jul 31, 2015 at 10:04:35AM +0200, Ingo Molnar escreveu:
> * Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> > Please consider pulling,
> > for you to fetch changes up to aa53c09e90a19c215549bd1ca970fddcb7c0c001:
>
> Hm, your pull request mail was cut short as it ends here abruptly. I figured it
> out nevertheless, from the commit log:
Right, I forgot the 'git request-pull' part after pushing the signed tag
:-\
Thanks!
- Arnaldo
> ====================>
>
> User visible changes:
>
> - Force period term to overload global settings, i.e. previously this
> command line:
>
> $ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
>
> would result in both events having a period equal to 1000, with the fix we
> get something saner:
>
> $ perf evlist -v | grep period
> cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
> cycles: ... { sample_period, sample_freq }: 1000 ...
> $
>
> (Jiri Olsa)
>
> Infrastructure changes:
>
> - Use the dummy software event with freq=0 in the twatch.py python
> binding example, to avoid disabling nohz. (Arnaldo Carvalho de Melo)
>
> - Add some missing constants to the python binding. (Arnaldo Carvalho de Melo)
>
> - Fix mismatched declarations for elf_getphdrnum, that happens
> only in the corner case where this function is not found on
> the system. (Arnaldo Carvalho de Melo)
>
> - Add build test for having ending double slash. (Jiri Olsa)
>
> - Introduce callgraph_set for callgraph option. (Kan Liang)
>
> tools/perf/Documentation/perf-record.txt | 2 +-
> tools/perf/builtin-record.c | 9 +-
> tools/perf/builtin-trace.c | 2 +-
> tools/perf/perf.h | 1 +
> tools/perf/python/twatch.py | 12 ++-
> tools/perf/tests/make | 13 ++-
> tools/perf/tests/parse-events.c | 12 ++-
> tools/perf/util/evsel.c | 33 ++++++++
> tools/perf/util/evsel.h | 20 +++++
> tools/perf/util/parse-events.c | 70 +++++++++++++---
> tools/perf/util/python.c | 140 ++++++++++++++++---------------
> tools/perf/util/session.c | 4 +-
> tools/perf/util/symbol-elf.c | 2 +-
> tools/perf/util/trace-event.c | 7 +-
> tools/perf/util/trace-event.h | 3 +-
> 15 files changed, 233 insertions(+), 97 deletions(-)
>
> <================
>
> Pulled, thanks a lot Arnaldo!
>
> Ingo
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-07-30 16:16 Arnaldo Carvalho de Melo
@ 2015-07-31 8:04 ` Ingo Molnar
2015-07-31 13:30 ` Arnaldo Carvalho de Melo
0 siblings, 1 reply; 57+ messages in thread
From: Ingo Molnar @ 2015-07-31 8:04 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, Andi Kleen, Borislav Petkov,
David Ahern, Frederic Weisbecker, Jaroslav Skarvada, Jeremy Eder,
Jiri Olsa, Kan Liang, Luiz Fernando Capitulino, Namhyung Kim,
Pawel Moll, Peter Zijlstra, Stephane Eranian
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit 4b0c53e9e1a2a785746b2d379a32cb70b4dbb2fd:
>
> Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-07-27 17:56:18 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to aa53c09e90a19c215549bd1ca970fddcb7c0c001:
Hm, your pull request mail was cut short as it ends here abruptly. I figured it
out nevertheless, from the commit log:
====================>
User visible changes:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure changes:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz. (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding. (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system. (Arnaldo Carvalho de Melo)
- Add build test for having ending double slash. (Jiri Olsa)
- Introduce callgraph_set for callgraph option. (Kan Liang)
tools/perf/Documentation/perf-record.txt | 2 +-
tools/perf/builtin-record.c | 9 +-
tools/perf/builtin-trace.c | 2 +-
tools/perf/perf.h | 1 +
tools/perf/python/twatch.py | 12 ++-
tools/perf/tests/make | 13 ++-
tools/perf/tests/parse-events.c | 12 ++-
tools/perf/util/evsel.c | 33 ++++++++
tools/perf/util/evsel.h | 20 +++++
tools/perf/util/parse-events.c | 70 +++++++++++++---
tools/perf/util/python.c | 140 ++++++++++++++++---------------
tools/perf/util/session.c | 4 +-
tools/perf/util/symbol-elf.c | 2 +-
tools/perf/util/trace-event.c | 7 +-
tools/perf/util/trace-event.h | 3 +-
15 files changed, 233 insertions(+), 97 deletions(-)
<================
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2015-07-30 16:16 Arnaldo Carvalho de Melo
2015-07-31 8:04 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-07-30 16:16 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, Borislav Petkov, David Ahern, Frederic Weisbecker,
Jaroslav Skarvada, Jeremy Eder, Jiri Olsa, Kan Liang,
Luiz Fernando Capitulino, Namhyung Kim, Pawel Moll,
Peter Zijlstra, Stephane Eranian
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 4b0c53e9e1a2a785746b2d379a32cb70b4dbb2fd:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-07-27 17:56:18 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to aa53c09e90a19c215549bd1ca970fddcb7c0c001:
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2015-06-16 18:21 Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-06-16 18:21 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, Borislav Petkov, David Ahern, Don Zickus,
Frederic Weisbecker, He Kuang, Hou Pengyang, Jiri Olsa,
Jiri Olsa, Masami Hiramatsu, Namhyung Kim, Naohiro Aota,
Peter Zijlstra, Stephane Eranian, Wang Nan, Zefan Li,
Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 61d67d568445413137995e1bea2746783e3a81e9:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2015-06-12 10:08:38 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to b031220d520238075bd99513a420e65cf37866ad:
perf probe: Fix to return error if no probe is added (2015-06-16 11:39:51 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- List perf probes to stdout (Masami Hiramatsu)
- Return error when none of the requested probes were
installed (Masami Hiramatsu)
- Cut off the gcc optimization postfixes from
function name in 'perf probe' (Masami Hiramatsu)
Infrastructure:
- Replace map->referenced & maps->removed_maps with
map->refcnt (Arnaldo Carvalho de Melo)
- Introduce xyarray__reset function (Jiri Olsa)
- Add thread_map__(alloc|realloc) helpers (Jiri Olsa)
- Move perf_evsel__(alloc|free|reset)_counts into stat object (Jiri Olsa)
- Introduce perf_counts__(new|delete|reset) functions (Jiri Olsa)
Build Fixes:
- Fix a libunwind related compile error (Hou Pengyang)
- Fix python/perf.so compiling error related to libtraceevent (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (1):
perf tools: Replace map->referenced & maps->removed_maps with map->refcnt
Hou Pengyang (1):
perf unwind: Fix a compile error
Jiri Olsa (4):
perf tools: Introduce xyarray__reset function
perf tools: Add thread_map__(alloc|realloc) helpers
perf tools: Move perf_evsel__(alloc|free|reset)_counts into stat object
perf stat: Introduce perf_counts__(new|delete|reset) functions
Masami Hiramatsu (3):
perf probe: Cut off the gcc optimization postfixes from function name
perf probe: List probes in stdout
perf probe: Fix to return error if no probe is added
Wang Nan (1):
tools lib traceevent: Fix python/perf.so compiling error
tools/perf/Makefile.perf | 2 +-
tools/perf/builtin-stat.c | 19 ++--
tools/perf/tests/openat-syscall-all-cpus.c | 1 +
tools/perf/util/evsel.c | 19 +---
tools/perf/util/evsel.h | 3 -
tools/perf/util/hist.c | 37 ++++---
tools/perf/util/map.c | 58 +---------
tools/perf/util/map.h | 10 +-
tools/perf/util/probe-event.c | 167 +++++++++++++++++++----------
tools/perf/util/python-ext-sources | 1 +
tools/perf/util/stat.c | 36 +++++++
tools/perf/util/stat.h | 6 ++
tools/perf/util/thread_map.c | 24 +++--
tools/perf/util/unwind-libunwind.c | 2 +-
tools/perf/util/xyarray.c | 8 ++
tools/perf/util/xyarray.h | 2 +
16 files changed, 223 insertions(+), 172 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2015-01-29 20:23 Arnaldo Carvalho de Melo
@ 2015-01-30 18:28 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2015-01-30 18:28 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, Alexey Brodkin, Andi Kleen,
David Ahern, Frederic Weisbecker, Jiri Olsa, Milian Wolff,
Namhyung Kim, Peter Zijlstra, Stephane Eranian, Vineet Gupta,
Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling, there is some more stuff in queue to be
> processed, but better send in smaller batches,
>
> - Arnaldo
>
> The following changes since commit b3890e4704594fa23abe1395d1fafc97d3214be8:
>
> Merge branch 'perf/hw_breakpoints' into perf/core (2015-01-28 15:48:59 +0100)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to c52686f9f888d23ca72f1309e86af8e91d075697:
>
> perf symbols: Convert lseek + read to pread (2015-01-29 17:02:01 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> User visible:
>
> - Show precise number of samples in at the end of a 'record' session, if
> processing build ids, since we will then traverse the whole perf.data file
> and see all the PERF_RECORD_SAMPLE records, otherwise stop showing the
> previous off-base heuristicly counted number of "samples" (Namhyung Kim).
>
> - Support to read compressed module from build-id cache (Namhyung Kim)
>
> Infrastructure:
>
> - Cache eh/debug frame offset for dwarf unwind (Namhyung Kim)
>
> - Set header version correctly in all cases (Namhyung Kim)
>
> - Set attr.task bit for a tracking event, to be consistent (Namhyung Kim)
> perf tools: Use perf_data_file__fd() consistently
> perf symbols: Convert lseek + read to pread
>
> - Don't rely on malloc working for sz 0, fixing another problem when
> using uClibc (Vineet Gupta)
>
> - Provide stub for missing pthread_attr_setaffinity_np for libcs where this
> is not available, such as uClibc (Vineet Gupta)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Namhyung Kim (8):
> perf callchain: Cache eh/debug frame offset for dwarf unwind
> perf tools: Do not use __perf_session__process_events() directly
> perf record: Show precise number of samples
> perf header: Set header version correctly
> perf evsel: Set attr.task bit for a tracking event
> perf symbols: Support to read compressed module from build-id cache
> perf tools: Use perf_data_file__fd() consistently
> perf symbols: Convert lseek + read to pread
>
> Vineet Gupta (2):
> perf evsel: Don't rely on malloc working for sz 0
> perf tools: Provide stub for missing pthread_attr_setaffinity_np
>
> tools/perf/bench/futex.h | 13 ++++
> tools/perf/builtin-inject.c | 5 +-
> tools/perf/builtin-record.c | 70 +++++++++++++++-------
> tools/perf/config/Makefile | 6 ++
> tools/perf/config/feature-checks/Makefile | 4 ++
> tools/perf/config/feature-checks/test-all.c | 5 ++
> .../test-pthread-attr-setaffinity-np.c | 14 +++++
> tools/perf/util/dso.c | 6 +-
> tools/perf/util/dso.h | 1 +
> tools/perf/util/evsel.c | 4 ++
> tools/perf/util/header.c | 2 +-
> tools/perf/util/session.c | 6 +-
> tools/perf/util/session.h | 3 -
> tools/perf/util/symbol-elf.c | 13 ++--
> tools/perf/util/unwind-libunwind.c | 31 ++++++----
> 15 files changed, 131 insertions(+), 52 deletions(-)
> create mode 100644 tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
Pulled into tip:perf/core, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2015-01-29 20:23 Arnaldo Carvalho de Melo
2015-01-30 18:28 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2015-01-29 20:23 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Alexey Brodkin, Andi Kleen, David Ahern, Frederic Weisbecker,
Jiri Olsa, Milian Wolff, Namhyung Kim, Peter Zijlstra,
Stephane Eranian, Vineet Gupta, Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling, there is some more stuff in queue to be
processed, but better send in smaller batches,
- Arnaldo
The following changes since commit b3890e4704594fa23abe1395d1fafc97d3214be8:
Merge branch 'perf/hw_breakpoints' into perf/core (2015-01-28 15:48:59 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to c52686f9f888d23ca72f1309e86af8e91d075697:
perf symbols: Convert lseek + read to pread (2015-01-29 17:02:01 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- Show precise number of samples in at the end of a 'record' session, if
processing build ids, since we will then traverse the whole perf.data file
and see all the PERF_RECORD_SAMPLE records, otherwise stop showing the
previous off-base heuristicly counted number of "samples" (Namhyung Kim).
- Support to read compressed module from build-id cache (Namhyung Kim)
Infrastructure:
- Cache eh/debug frame offset for dwarf unwind (Namhyung Kim)
- Set header version correctly in all cases (Namhyung Kim)
- Set attr.task bit for a tracking event, to be consistent (Namhyung Kim)
perf tools: Use perf_data_file__fd() consistently
perf symbols: Convert lseek + read to pread
- Don't rely on malloc working for sz 0, fixing another problem when
using uClibc (Vineet Gupta)
- Provide stub for missing pthread_attr_setaffinity_np for libcs where this
is not available, such as uClibc (Vineet Gupta)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Namhyung Kim (8):
perf callchain: Cache eh/debug frame offset for dwarf unwind
perf tools: Do not use __perf_session__process_events() directly
perf record: Show precise number of samples
perf header: Set header version correctly
perf evsel: Set attr.task bit for a tracking event
perf symbols: Support to read compressed module from build-id cache
perf tools: Use perf_data_file__fd() consistently
perf symbols: Convert lseek + read to pread
Vineet Gupta (2):
perf evsel: Don't rely on malloc working for sz 0
perf tools: Provide stub for missing pthread_attr_setaffinity_np
tools/perf/bench/futex.h | 13 ++++
tools/perf/builtin-inject.c | 5 +-
tools/perf/builtin-record.c | 70 +++++++++++++++-------
tools/perf/config/Makefile | 6 ++
tools/perf/config/feature-checks/Makefile | 4 ++
tools/perf/config/feature-checks/test-all.c | 5 ++
.../test-pthread-attr-setaffinity-np.c | 14 +++++
tools/perf/util/dso.c | 6 +-
tools/perf/util/dso.h | 1 +
tools/perf/util/evsel.c | 4 ++
tools/perf/util/header.c | 2 +-
tools/perf/util/session.c | 6 +-
tools/perf/util/session.h | 3 -
tools/perf/util/symbol-elf.c | 13 ++--
tools/perf/util/unwind-libunwind.c | 31 ++++++----
15 files changed, 131 insertions(+), 52 deletions(-)
create mode 100644 tools/perf/config/feature-checks/test-pthread-attr-setaffinity-np.c
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2014-12-22 15:29 Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2014-12-22 15:29 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, Borislav Petkov, David Ahern, Don Zickus,
Frederic Weisbecker, Jiri Olsa, Joe Mario, Mike Galbraith,
Namhyung Kim, Paul Mackerras, Peter Zijlstra,
Ramkumar Ramachandra, Richard Fowles, Rickard Strandqvist,
Stephane Eranian
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit ac931f87a647ca156f65a4c00e7297165e4fa2d8:
perf: Fix building warning on ARM 32 (2014-12-19 13:09:43 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to e51679f54467febc6e9f1091c0ac8c31b54d59a1:
perf tools: Remove some unused functions from color.c (2014-12-22 11:55:09 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
- Enable sampling loads and stores simultaneously by default
in 'perf mem' (Stephane Eranian)
- Show progress bar in more places while doing histogram processing
in the hists browser (Namhyung Kim)
- Print backtrace symbols when segfault occurs in 'report' (Namhyung Kim)
Infrastructure:
- Consistency and code duplication elimination fixes in the
hists code (Arnaldo Carvalho de Melo)
- Append callchains only when requested (Namhyung Kim)
- Remove some unused functions from color.c (Rickard Strandqvist)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (4):
perf mem: Move the mem_operations global to struct perf_mem
perf tools: Remove EOL whitespaces
perf hists: Rename hist_entry__free to __delete
perf hists: Introduce function for deleting/removing hist_entry
Namhyung Kim (4):
perf report: Get rid of report__inc_stat()
perf report: Show progress bar for output resorting
perf ui/tui: Print backtrace symbols when segfault occurs
perf callchain: Append callchains only when requested
Rickard Strandqvist (1):
perf tools: Remove some unused functions from color.c
Stephane Eranian (1):
perf mem: Enable sampling loads and stores simultaneously
tools/perf/Documentation/perf-buildid-cache.txt | 2 +-
tools/perf/Documentation/perf-mem.txt | 9 +-
tools/perf/Documentation/perf-script.txt | 28 ++---
tools/perf/builtin-annotate.c | 2 +-
tools/perf/builtin-buildid-cache.c | 4 +-
tools/perf/builtin-diff.c | 4 +-
tools/perf/builtin-mem.c | 131 ++++++++++++++++-----
tools/perf/builtin-report.c | 40 ++++---
tools/perf/builtin-stat.c | 2 +-
tools/perf/builtin-top.c | 6 +-
tools/perf/builtin-trace.c | 80 ++++++-------
tools/perf/tests/attr.py | 1 -
tools/perf/tests/hists_cumulate.c | 4 +-
tools/perf/tests/hists_filter.c | 2 +-
tools/perf/tests/hists_output.c | 12 +-
tools/perf/tests/make | 1 -
tools/perf/tests/parse-events.c | 2 +-
tools/perf/ui/browsers/annotate.c | 3 +-
tools/perf/ui/progress.h | 4 +-
tools/perf/ui/tui/setup.c | 26 +++-
tools/perf/util/annotate.c | 2 +-
tools/perf/util/color.c | 126 --------------------
tools/perf/util/color.h | 2 -
tools/perf/util/hist.c | 59 ++++++----
tools/perf/util/hist.h | 4 +-
tools/perf/util/parse-events.c | 6 +-
tools/perf/util/python.c | 2 +-
.../util/scripting-engines/trace-event-python.c | 2 +-
tools/perf/util/session.c | 2 +-
tools/perf/util/symbol.c | 2 +-
30 files changed, 278 insertions(+), 292 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2014-09-26 20:19 Arnaldo Carvalho de Melo
@ 2014-09-27 7:20 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2014-09-27 7:20 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Adrian Hunter, Andi Kleen, Corey Ashford,
David Ahern, Jiri Olsa, Milian Wolff, Namhyung Kim,
Paul Mackerras, Peter Zijlstra, Peter Zijlstra, Pranith Kumar,
Stephane Eranian, Taeung Song, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@kernel.org> wrote:
> Hi Ingo,
>
> Please consider pulling.
>
> - Arnaldo
>
> The following changes since commit cf8102f64c8d23f0bd4af0659bbd94d0c1d8d1c7:
>
> Merge tag 'perf-fdarray-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2014-09-26 11:12:46 +0200)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
>
> for you to fetch changes up to 49757c9cc7887bc79f742eb8aacf16e464ca5f0b:
>
> perf tools: Fix line number in the config file error message (2014-09-26 12:45:23 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> User visible:
>
> o Restore "--callchain graph" output, broken in recent cset to end
> up being the same as "fractal" (Namhyung Kim)
>
> o Allow profiling when kptr_restrict == 1 for non root users,
> kernel samples will just remain unresolved (Andi Kleen)
>
> o Allow configuring default options for callchains in config file (Namhyung Kim)
>
> o Fix line number in the config file error message (Jiri Olsa)
>
> o Fix --per-core on multi socket systems (Andi Kleen)
>
> Cleanups:
>
> o Use ACCESS_ONCE() instead of volatile cast. (Pranith Kumar)
>
> o Modify error code for when perf_session__new() fails (Taeung Song)
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Andi Kleen (2):
> perf stat: Fix --per-core on multi socket systems
> perf tools: Fix perf record as non root with kptr_restrict == 1
>
> Jiri Olsa (1):
> perf tools: Fix line number in the config file error message
>
> Namhyung Kim (5):
> perf hists browser: Fix callchain print bug on TUI
> perf tools: Move callchain config from record_opts to callchain_param
> perf callchain: Move some parser functions to callchain.c
> perf tools: Introduce perf_callchain_config()
> perf tools: Convert {record,top}.call-graph option to call-graph.record-mode
>
> Pranith Kumar (1):
> perf tools: Use ACCESS_ONCE() instead of volatile cast
>
> Taeung Song (1):
> perf tools: Modify error code for when perf_session__new() fails
>
> tools/perf/builtin-annotate.c | 2 +-
> tools/perf/builtin-diff.c | 2 +-
> tools/perf/builtin-evlist.c | 2 +-
> tools/perf/builtin-inject.c | 2 +-
> tools/perf/builtin-kmem.c | 2 +-
> tools/perf/builtin-kvm.c | 4 +-
> tools/perf/builtin-lock.c | 2 +-
> tools/perf/builtin-mem.c | 2 +-
> tools/perf/builtin-record.c | 119 ++++---------------------
> tools/perf/builtin-report.c | 2 +-
> tools/perf/builtin-script.c | 2 +-
> tools/perf/builtin-stat.c | 9 +-
> tools/perf/builtin-timechart.c | 2 +-
> tools/perf/builtin-top.c | 6 +-
> tools/perf/builtin-trace.c | 2 +-
> tools/perf/perf.h | 3 -
> tools/perf/ui/browsers/hists.c | 3 -
> tools/perf/util/callchain.c | 193 +++++++++++++++++++++++++++++++++++++----
> tools/perf/util/callchain.h | 6 +-
> tools/perf/util/config.c | 16 +++-
> tools/perf/util/event.c | 8 +-
> tools/perf/util/evsel.c | 11 ++-
> tools/perf/util/session.c | 2 +-
> tools/perf/util/session.h | 2 +-
> 24 files changed, 241 insertions(+), 163 deletions(-)
Pulled into tip:perf/core, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2014-09-26 20:19 Arnaldo Carvalho de Melo
2014-09-27 7:20 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2014-09-26 20:19 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Andi Kleen, Corey Ashford, David Ahern, Jiri Olsa, Milian Wolff,
Namhyung Kim, Paul Mackerras, Peter Zijlstra, Peter Zijlstra,
Pranith Kumar, Stephane Eranian, Taeung Song,
Arnaldo Carvalho de Melo
Hi Ingo,
Please consider pulling.
- Arnaldo
The following changes since commit cf8102f64c8d23f0bd4af0659bbd94d0c1d8d1c7:
Merge tag 'perf-fdarray-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2014-09-26 11:12:46 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo
for you to fetch changes up to 49757c9cc7887bc79f742eb8aacf16e464ca5f0b:
perf tools: Fix line number in the config file error message (2014-09-26 12:45:23 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
User visible:
o Restore "--callchain graph" output, broken in recent cset to end
up being the same as "fractal" (Namhyung Kim)
o Allow profiling when kptr_restrict == 1 for non root users,
kernel samples will just remain unresolved (Andi Kleen)
o Allow configuring default options for callchains in config file (Namhyung Kim)
o Fix line number in the config file error message (Jiri Olsa)
o Fix --per-core on multi socket systems (Andi Kleen)
Cleanups:
o Use ACCESS_ONCE() instead of volatile cast. (Pranith Kumar)
o Modify error code for when perf_session__new() fails (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Andi Kleen (2):
perf stat: Fix --per-core on multi socket systems
perf tools: Fix perf record as non root with kptr_restrict == 1
Jiri Olsa (1):
perf tools: Fix line number in the config file error message
Namhyung Kim (5):
perf hists browser: Fix callchain print bug on TUI
perf tools: Move callchain config from record_opts to callchain_param
perf callchain: Move some parser functions to callchain.c
perf tools: Introduce perf_callchain_config()
perf tools: Convert {record,top}.call-graph option to call-graph.record-mode
Pranith Kumar (1):
perf tools: Use ACCESS_ONCE() instead of volatile cast
Taeung Song (1):
perf tools: Modify error code for when perf_session__new() fails
tools/perf/builtin-annotate.c | 2 +-
tools/perf/builtin-diff.c | 2 +-
tools/perf/builtin-evlist.c | 2 +-
tools/perf/builtin-inject.c | 2 +-
tools/perf/builtin-kmem.c | 2 +-
tools/perf/builtin-kvm.c | 4 +-
tools/perf/builtin-lock.c | 2 +-
tools/perf/builtin-mem.c | 2 +-
tools/perf/builtin-record.c | 119 ++++---------------------
tools/perf/builtin-report.c | 2 +-
tools/perf/builtin-script.c | 2 +-
tools/perf/builtin-stat.c | 9 +-
tools/perf/builtin-timechart.c | 2 +-
tools/perf/builtin-top.c | 6 +-
tools/perf/builtin-trace.c | 2 +-
tools/perf/perf.h | 3 -
tools/perf/ui/browsers/hists.c | 3 -
tools/perf/util/callchain.c | 193 +++++++++++++++++++++++++++++++++++++----
tools/perf/util/callchain.h | 6 +-
tools/perf/util/config.c | 16 +++-
tools/perf/util/event.c | 8 +-
tools/perf/util/evsel.c | 11 ++-
tools/perf/util/session.c | 2 +-
tools/perf/util/session.h | 2 +-
24 files changed, 241 insertions(+), 163 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
[not found] ` <CAM9d7ciP4tLUmR-soEKH3nf6=XC5evKGfuQW1fUGA8Z42U3xCg@mail.gmail.com>
@ 2014-04-09 5:31 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2014-04-09 5:31 UTC (permalink / raw)
To: Namhyung Kim
Cc: Andi Kleen, Jiri Olsa, Peter Zijlstra, Stephane Eranian,
Don Zickus, linux-kernel, Thomas Gleixner
* Namhyung Kim <namhyung@kernel.org> wrote:
> Hi Andi,
>
> On Wed, Apr 9, 2014 at 4:50 AM, Andi Kleen <andi@firstfloor.org> wrote:
> > Jiri Olsa <jolsa@redhat.com> writes:
> >
> >> hi Ingo,
> >> please consider pulling
> >
> > So who actually maintains perf user space now?
> >
> > I have at least 4 perf user patchkits/bug fixes pending, but
> > Arnaldo hasn't answered any email for weeks.
So a bit of background: sloppy, abusive contributors not willing to
change get ignored after some time. For example Andi got such a bad
track record in the x86 and perf space with me that all your mails go
to /dev/null currently. (I only saw this one because Namhyung replied
to it.)
Andi, as I explained it to you previously, if you want me to merge
patches from you then you need to 1) improve the way you work 2) send
it to someone who is willing to deal with you and sign off on it and
forward it to me.
Seems like you managed to burn up your goodwill with Arnaldo as well.
You need to find someone else willing to pay the expense of dealing
with your passive-aggressive style.
Just a quick example of your abuse: for example you know it perfectly
well that perf is well maintained, a simple 'git log tools/perf/' will
tell you that there's a steady stream of patches going in and that
perf contributors are busy.
Yet in this mail you actually lie about that: you pretend that you
don't know that most Linux maintainers have trouble working with you,
you pretend that perf is "unmaintained", you pretend that you don't
know who is maintaining it, just to create unfair pressure on Arnaldo
...
That kind of approach really sucks, and if you run out of people's
patience with petty office tactics like that then you should not fault
them, you should fault yourself.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2014-04-08 18:00 Jiri Olsa
[not found] ` <8738hnk3dg.fsf@tassilo.jf.intel.com>
0 siblings, 1 reply; 57+ messages in thread
From: Jiri Olsa @ 2014-04-08 18:00 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Adrian Hunter, Corey Ashford, David Ahern,
Don Zickus, Frederic Weisbecker, Jiri Olsa, Mike Galbraith,
Namhyung Kim, Paul Mackerras, Peter Zijlstra,
Ramkumar Ramachandra, Stephane Eranian, Steven Rostedt
hi Ingo,
please consider pulling
jirka
The following changes since commit 538592ff0b008237ae88f5ce5fb1247127dc3ce5:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2014-03-19 08:05:47 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git tags/perf-core-for-mingo
for you to fetch changes up to dad45c767443b738232a99c747efaaddbe56855c:
MAINTAINERS: Change e-mail to kernel.org one (2014-04-08 19:39:43 +0200)
----------------------------------------------------------------
perf/core improvements and fixes:
Documentation:
. Fix documentation of invalid 'perf top -s' option (Namhyung Kim)
. Change e-mail to kernel.org one in MAINTAINERS file (Arnaldo Carvalho de Melo)
Developer stuff:
. Disable unwind libraries when libelf isn't found (Arnaldo Carvalho de Melo)
. Add thread maps lookup automated tests (Jiri Olsa)
. Print event name when showing libtraceevent warnings if possible (Namhyung Kim)
. Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by completion scripts (Ramkumar Ramachandra)
----------------------------------------------------------------
Arnaldo Carvalho de Melo (2):
perf callchains: Disable unwind libraries when libelf isn't found
MAINTAINERS: Change e-mail to kernel.org one
Jiri Olsa (1):
perf tests: Add thread maps lookup automated tests
Namhyung Kim (3):
perf top: Fix documentation of invalid -s option
tools lib traceevent: Print event name when show warning if possible
tools lib traceevent: Do not call warning() directly
Ramkumar Ramachandra (4):
perf kmem: Introduce --list-cmds for use by scripts
perf mem: Introduce --list-cmds for use by scripts
perf lock: Introduce --list-cmds for use by scripts
perf sched: Introduce --list-cmds for use by scripts
MAINTAINERS | 2 +-
tools/lib/traceevent/event-parse.c | 109 +++++++++-------
tools/perf/Documentation/perf-top.txt | 1 -
tools/perf/Makefile.perf | 1 +
tools/perf/builtin-kmem.c | 8 +-
tools/perf/builtin-lock.c | 10 +-
tools/perf/builtin-mem.c | 15 ++-
tools/perf/builtin-sched.c | 10 +-
tools/perf/config/Makefile | 2 +
tools/perf/perf-completion.sh | 4 +-
tools/perf/perf.h | 6 +
tools/perf/tests/builtin-test.c | 4 +
tools/perf/tests/mmap-thread-lookup.c | 233 ++++++++++++++++++++++++++++++++++
tools/perf/tests/tests.h | 1 +
14 files changed, 341 insertions(+), 65 deletions(-)
create mode 100644 tools/perf/tests/mmap-thread-lookup.c
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2013-11-14 20:25 Arnaldo Carvalho de Melo
@ 2013-11-15 6:38 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2013-11-15 6:38 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Azat Khuzhin, Bill Gray, David Ahern, Davidlohr Bueso,
Don Zickus, Frederic Weisbecker, Jiri Olsa, Joe Mario,
Mike Galbraith, Namhyung Kim, Paul Mackerras, Pekka Enberg,
Peter Zijlstra, Richard Fowles, stable, Stephane Eranian,
Sukadev Bhattiprolu, v.karpov, Waiman Long,
Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
>
> Hi Ingo,
>
> Please consider pulling, done on top of tip/perf/urgent.
>
> - Arnaldo
>
> The following changes since commit e310718d0e83aeb9969264dc577c45db16d9104d:
>
> tools/perf/build: Fix feature-libunwind-debug-frame handling (2013-11-14 18:00:45 +0100)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
>
> for you to fetch changes up to 539e6bb71e350541105e67e3d6c31392d9da25ef:
>
> perf record: Add an option to force per-cpu mmaps (2013-11-14 16:10:27 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> . Synthesize anon MMAP records again, fix from Don Zickus.
>
> . Add an option in 'perf record' to force per-cpu mmaps, from Adrian Hunter.
>
> . Limit max callchain using max_stack on DWARF unwinding too.
>
> . Fix segfault in the UI browser caused by off by one handling END key.
>
> . Add '--demangle'/'--no-demangle' to perf probe, so that we can overcome
> current limitations in handling C++ symbols, from Azat Khuzhin .
>
> . Tweak 'perf trace' summary output, from Pekka Enberg.
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Adrian Hunter (1):
> perf record: Add an option to force per-cpu mmaps
>
> Arnaldo Carvalho de Melo (4):
> perf tools: Use perf_evlist__{first,last}, perf_evsel__next
> perf evsel: Introduce perf_evsel__prev() method
> perf symbols: Limit max callchain using max_stack on DWARF unwinding too
> perf ui browser: Fix segfault caused by off by one handling END key
>
> Azat Khuzhin (1):
> perf probe: Add '--demangle'/'--no-demangle'
>
> Davidlohr Bueso (1):
> perf tools: Remove trivial extra semincolon
>
> Don Zickus (1):
> perf tools: Synthesize anon MMAP records again
>
> Ingo Molnar (1):
> perf top: Add missing newline if the 'uid' is invalid
>
> Pekka Enberg (1):
> perf trace: Tweak summary output
>
> tools/perf/Documentation/perf-record.txt | 6 ++++++
> tools/perf/builtin-probe.c | 2 ++
> tools/perf/builtin-record.c | 2 ++
> tools/perf/builtin-top.c | 4 ++--
> tools/perf/builtin-trace.c | 10 +++++-----
> tools/perf/tests/parse-events.c | 3 +--
> tools/perf/ui/browser.c | 4 ++--
> tools/perf/ui/browsers/hists.c | 11 +++++------
> tools/perf/util/event.c | 6 ++++--
> tools/perf/util/evlist.c | 6 ++++--
> tools/perf/util/evsel.c | 4 ++--
> tools/perf/util/evsel.h | 5 +++++
> tools/perf/util/machine.c | 2 +-
> tools/perf/util/target.h | 1 +
> tools/perf/util/unwind.c | 9 +++++----
> tools/perf/util/unwind.h | 5 +++--
> 16 files changed, 50 insertions(+), 30 deletions(-)
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2013-11-14 20:25 Arnaldo Carvalho de Melo
2013-11-15 6:38 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2013-11-14 20:25 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Azat Khuzhin, Bill Gray, David Ahern, Davidlohr Bueso,
Don Zickus, Frederic Weisbecker, Jiri Olsa, Joe Mario,
Mike Galbraith, Namhyung Kim, Paul Mackerras, Pekka Enberg,
Peter Zijlstra, Richard Fowles, stable, Stephane Eranian,
Sukadev Bhattiprolu, v.karpov, Waiman Long,
Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Hi Ingo,
Please consider pulling, done on top of tip/perf/urgent.
- Arnaldo
The following changes since commit e310718d0e83aeb9969264dc577c45db16d9104d:
tools/perf/build: Fix feature-libunwind-debug-frame handling (2013-11-14 18:00:45 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
for you to fetch changes up to 539e6bb71e350541105e67e3d6c31392d9da25ef:
perf record: Add an option to force per-cpu mmaps (2013-11-14 16:10:27 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
. Synthesize anon MMAP records again, fix from Don Zickus.
. Add an option in 'perf record' to force per-cpu mmaps, from Adrian Hunter.
. Limit max callchain using max_stack on DWARF unwinding too.
. Fix segfault in the UI browser caused by off by one handling END key.
. Add '--demangle'/'--no-demangle' to perf probe, so that we can overcome
current limitations in handling C++ symbols, from Azat Khuzhin .
. Tweak 'perf trace' summary output, from Pekka Enberg.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (1):
perf record: Add an option to force per-cpu mmaps
Arnaldo Carvalho de Melo (4):
perf tools: Use perf_evlist__{first,last}, perf_evsel__next
perf evsel: Introduce perf_evsel__prev() method
perf symbols: Limit max callchain using max_stack on DWARF unwinding too
perf ui browser: Fix segfault caused by off by one handling END key
Azat Khuzhin (1):
perf probe: Add '--demangle'/'--no-demangle'
Davidlohr Bueso (1):
perf tools: Remove trivial extra semincolon
Don Zickus (1):
perf tools: Synthesize anon MMAP records again
Ingo Molnar (1):
perf top: Add missing newline if the 'uid' is invalid
Pekka Enberg (1):
perf trace: Tweak summary output
tools/perf/Documentation/perf-record.txt | 6 ++++++
tools/perf/builtin-probe.c | 2 ++
tools/perf/builtin-record.c | 2 ++
tools/perf/builtin-top.c | 4 ++--
tools/perf/builtin-trace.c | 10 +++++-----
tools/perf/tests/parse-events.c | 3 +--
tools/perf/ui/browser.c | 4 ++--
tools/perf/ui/browsers/hists.c | 11 +++++------
tools/perf/util/event.c | 6 ++++--
tools/perf/util/evlist.c | 6 ++++--
tools/perf/util/evsel.c | 4 ++--
tools/perf/util/evsel.h | 5 +++++
tools/perf/util/machine.c | 2 +-
tools/perf/util/target.h | 1 +
tools/perf/util/unwind.c | 9 +++++----
tools/perf/util/unwind.h | 5 +++--
16 files changed, 50 insertions(+), 30 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2013-11-11 20:22 Arnaldo Carvalho de Melo
0 siblings, 0 replies; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2013-11-11 20:22 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter, Bill Gray,
David Ahern, Don Zickus, Frederic Weisbecker, Jiri Olsa,
Joe Mario, Mike Galbraith, Namhyung Kim, Patrick Palka,
Paul Mackerras, Peter Zijlstra, Richard Fowles, Stephane Eranian,
Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit caea6cf52139116e43e615d87fcbf9823e197fdf:
Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core (2013-11-11 09:44:16 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
for you to fetch changes up to 67c1e4a53b17894e6a24f95057cc374c4be051cb:
perf tests: Use lower sample_freq in sw clock event period test (2013-11-11 16:43:34 -0300)
----------------------------------------------------------------
perf/core improvements and fixes.
. Prevent condition that all sort keys are elided, fix from Namhyung Kim.
. Synthesize non-exec MMAP records when --data used, allowing the resolution of
data addresses to symbols (global variables, etc).
. Don't force a refresh during progress update in the TUI, greatly reducing
startup costs, fix from Patrick Palka.
. Fix sw clock event period test wrt not checking if using > max_sample_freq.
. Code cleanups by David Ahern and Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (1):
perf record: Use correct return type for write()
Arnaldo Carvalho de Melo (6):
perf evsel: Remove idx parm from constructor
perf record: Synthesize non-exec MMAP records when --data used
perf machine: Introduce synthesize_threads method out of open coded equivalent
perf machine: Simplify synthesize_threads method
perf tests: Check return of perf_evlist__open sw clock event period test
perf tests: Use lower sample_freq in sw clock event period test
David Ahern (1):
perf record: Move existing write_output into helper function
Namhyung Kim (1):
perf tools: Prevent condition that all sort keys are elided
Patrick Palka (1):
perf ui tui progress: Don't force a refresh during progress update
tools/perf/builtin-kvm.c | 14 ++-------
tools/perf/builtin-record.c | 21 ++++++-------
tools/perf/builtin-top.c | 10 ++-----
tools/perf/builtin-trace.c | 24 +++++----------
tools/perf/tests/code-reading.c | 2 +-
tools/perf/tests/evsel-tp-sched.c | 4 +--
tools/perf/tests/mmap-basic.c | 2 +-
tools/perf/tests/open-syscall-all-cpus.c | 2 +-
tools/perf/tests/open-syscall-tp-fields.c | 2 +-
tools/perf/tests/open-syscall.c | 2 +-
tools/perf/tests/sw-clock.c | 13 ++++++--
tools/perf/ui/tui/progress.c | 3 +-
tools/perf/util/event.c | 50 ++++++++++++++++++-------------
tools/perf/util/event.h | 4 +--
tools/perf/util/evlist.c | 9 +++---
tools/perf/util/evsel.c | 4 +--
tools/perf/util/evsel.h | 15 ++++++++--
tools/perf/util/header.c | 4 +--
tools/perf/util/machine.c | 12 ++++++++
tools/perf/util/machine.h | 12 ++++++++
tools/perf/util/parse-events.c | 6 ++--
tools/perf/util/sort.c | 13 ++++++++
22 files changed, 133 insertions(+), 95 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2013-11-05 20:09 Arnaldo Carvalho de Melo
@ 2013-11-06 5:31 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2013-11-06 5:31 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Corey Ashford, David Ahern, Frederic Weisbecker, Jiri Olsa,
Mike Galbraith, Namhyung Kim, Paul Mackerras, Peter Zijlstra,
Rodrigo Campos, Stephane Eranian
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit 87968f94fbea47df334502a0db645833ce8a848b:
>
> Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2013-11-04 21:14:04 +0100)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
>
> for you to fetch changes up to 316c7136f8bad924609163b9b115f68d59a68c82:
>
> perf tools: Finish the removal of 'self' arguments (2013-11-05 15:32:36 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> . Check maximum frequency rate for record/top, emitting better error
> messages, from Jiri Olsa.
>
> . Disable live kvm command if timerfd is not supported, from David Ahern.
>
> . Add usage to 'perf list', from David Ahern.
>
> . Fix detection of non-core features, from David Ahern.
>
> . Consolidate __hists__add_*entry(), cleanup from Namhyung Kim.
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Arnaldo Carvalho de Melo (2):
> perf fs: Rename NAME_find_mountpoint() to NAME__mountpoint()
> perf tools: Finish the removal of 'self' arguments
>
> David Ahern (4):
> perf kvm: Disable live command if timerfd is not supported
> tools/perf/build: Fix detection of non-core features
> perf list: Remove a level of indentation
> perf list: Add usage
>
> Jiri Olsa (3):
> perf tools: Factor sysfs code into generic fs object
> perf fs: Add procfs support
> perf tools: Check maximum frequency rate for record/top
>
> Namhyung Kim (1):
> perf hists: Consolidate __hists__add_*entry()
>
> tools/perf/Makefile.perf | 4 +-
> tools/perf/builtin-annotate.c | 2 +-
> tools/perf/builtin-diff.c | 3 +-
> tools/perf/builtin-kvm.c | 12 ++
> tools/perf/builtin-list.c | 84 ++++++++------
> tools/perf/builtin-record.c | 15 +--
> tools/perf/builtin-report.c | 16 ++-
> tools/perf/builtin-top.c | 20 +---
> tools/perf/config/Makefile | 17 ++-
> tools/perf/config/feature-checks/Makefile | 6 +-
> tools/perf/config/feature-checks/test-all.c | 5 +
> tools/perf/config/feature-checks/test-timerfd.c | 18 +++
> .../perf/scripts/python/Perf-Trace-Util/Context.c | 6 +-
> tools/perf/tests/hists_link.c | 6 +-
> tools/perf/tests/parse-events.c | 6 +-
> tools/perf/ui/browser.h | 32 +++---
> tools/perf/ui/browsers/hists.c | 2 +-
> tools/perf/ui/browsers/map.c | 40 +++----
> tools/perf/ui/browsers/map.h | 2 +-
> tools/perf/ui/browsers/scripts.c | 8 +-
> tools/perf/ui/stdio/hist.c | 14 +--
> tools/perf/util/build-id.h | 3 +-
> tools/perf/util/cpumap.c | 6 +-
> tools/perf/util/event.c | 6 +-
> tools/perf/util/event.h | 3 +-
> tools/perf/util/evlist.h | 3 +-
> tools/perf/util/fs.c | 119 ++++++++++++++++++++
> tools/perf/util/fs.h | 7 ++
> tools/perf/util/hist.c | 75 ++-----------
> tools/perf/util/hist.h | 51 +++------
> tools/perf/util/include/linux/magic.h | 4 +
> tools/perf/util/pmu.c | 17 +--
> tools/perf/util/probe-finder.c | 113 +++++++++----------
> tools/perf/util/probe-finder.h | 10 +-
> tools/perf/util/pstack.h | 10 +-
> tools/perf/util/python-ext-sources | 2 +-
> tools/perf/util/record.c | 71 ++++++++++++
> tools/perf/util/session.c | 121 ++++++++++-----------
> tools/perf/util/session.h | 27 ++---
> tools/perf/util/sort.h | 2 +-
> tools/perf/util/strfilter.c | 32 +++---
> tools/perf/util/strfilter.h | 12 +-
> tools/perf/util/sysfs.c | 60 ----------
> tools/perf/util/sysfs.h | 6 -
> tools/perf/util/thread.h | 10 +-
> 45 files changed, 591 insertions(+), 497 deletions(-)
> create mode 100644 tools/perf/config/feature-checks/test-timerfd.c
> create mode 100644 tools/perf/util/fs.c
> create mode 100644 tools/perf/util/fs.h
> delete mode 100644 tools/perf/util/sysfs.c
> delete mode 100644 tools/perf/util/sysfs.h
Pulled, thanks Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2013-11-05 20:09 Arnaldo Carvalho de Melo
2013-11-06 5:31 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2013-11-05 20:09 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
Corey Ashford, David Ahern, Frederic Weisbecker, Jiri Olsa,
Mike Galbraith, Namhyung Kim, Paul Mackerras, Peter Zijlstra,
Rodrigo Campos, Stephane Eranian
From: Arnaldo Carvalho de Melo <acme@redhat.com>
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 87968f94fbea47df334502a0db645833ce8a848b:
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core (2013-11-04 21:14:04 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
for you to fetch changes up to 316c7136f8bad924609163b9b115f68d59a68c82:
perf tools: Finish the removal of 'self' arguments (2013-11-05 15:32:36 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
. Check maximum frequency rate for record/top, emitting better error
messages, from Jiri Olsa.
. Disable live kvm command if timerfd is not supported, from David Ahern.
. Add usage to 'perf list', from David Ahern.
. Fix detection of non-core features, from David Ahern.
. Consolidate __hists__add_*entry(), cleanup from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Arnaldo Carvalho de Melo (2):
perf fs: Rename NAME_find_mountpoint() to NAME__mountpoint()
perf tools: Finish the removal of 'self' arguments
David Ahern (4):
perf kvm: Disable live command if timerfd is not supported
tools/perf/build: Fix detection of non-core features
perf list: Remove a level of indentation
perf list: Add usage
Jiri Olsa (3):
perf tools: Factor sysfs code into generic fs object
perf fs: Add procfs support
perf tools: Check maximum frequency rate for record/top
Namhyung Kim (1):
perf hists: Consolidate __hists__add_*entry()
tools/perf/Makefile.perf | 4 +-
tools/perf/builtin-annotate.c | 2 +-
tools/perf/builtin-diff.c | 3 +-
tools/perf/builtin-kvm.c | 12 ++
tools/perf/builtin-list.c | 84 ++++++++------
tools/perf/builtin-record.c | 15 +--
tools/perf/builtin-report.c | 16 ++-
tools/perf/builtin-top.c | 20 +---
tools/perf/config/Makefile | 17 ++-
tools/perf/config/feature-checks/Makefile | 6 +-
tools/perf/config/feature-checks/test-all.c | 5 +
tools/perf/config/feature-checks/test-timerfd.c | 18 +++
.../perf/scripts/python/Perf-Trace-Util/Context.c | 6 +-
tools/perf/tests/hists_link.c | 6 +-
tools/perf/tests/parse-events.c | 6 +-
tools/perf/ui/browser.h | 32 +++---
tools/perf/ui/browsers/hists.c | 2 +-
tools/perf/ui/browsers/map.c | 40 +++----
tools/perf/ui/browsers/map.h | 2 +-
tools/perf/ui/browsers/scripts.c | 8 +-
tools/perf/ui/stdio/hist.c | 14 +--
tools/perf/util/build-id.h | 3 +-
tools/perf/util/cpumap.c | 6 +-
tools/perf/util/event.c | 6 +-
tools/perf/util/event.h | 3 +-
tools/perf/util/evlist.h | 3 +-
tools/perf/util/fs.c | 119 ++++++++++++++++++++
tools/perf/util/fs.h | 7 ++
tools/perf/util/hist.c | 75 ++-----------
tools/perf/util/hist.h | 51 +++------
tools/perf/util/include/linux/magic.h | 4 +
tools/perf/util/pmu.c | 17 +--
tools/perf/util/probe-finder.c | 113 +++++++++----------
tools/perf/util/probe-finder.h | 10 +-
tools/perf/util/pstack.h | 10 +-
tools/perf/util/python-ext-sources | 2 +-
tools/perf/util/record.c | 71 ++++++++++++
tools/perf/util/session.c | 121 ++++++++++-----------
tools/perf/util/session.h | 27 ++---
tools/perf/util/sort.h | 2 +-
tools/perf/util/strfilter.c | 32 +++---
tools/perf/util/strfilter.h | 12 +-
tools/perf/util/sysfs.c | 60 ----------
tools/perf/util/sysfs.h | 6 -
tools/perf/util/thread.h | 10 +-
45 files changed, 591 insertions(+), 497 deletions(-)
create mode 100644 tools/perf/config/feature-checks/test-timerfd.c
create mode 100644 tools/perf/util/fs.c
create mode 100644 tools/perf/util/fs.h
delete mode 100644 tools/perf/util/sysfs.c
delete mode 100644 tools/perf/util/sysfs.h
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2013-09-02 20:56 Arnaldo Carvalho de Melo
@ 2013-09-03 5:49 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2013-09-03 5:49 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
David Ahern, Frederic Weisbecker, Jiri Olsa, Mike Galbraith,
Namhyung Kim, Paul Mackerras, Peter Zijlstra, Stephane Eranian,
Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit 7bfb7e6bdd906f11ee9e751b3fec4f4fc728e818:
>
> perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node() (2013-09-02 08:42:49 +0200)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
>
> for you to fetch changes up to 31cd3855c98119cae287b761d8d2e75018714c5d:
>
> perf trace: Tell arg formatters the arg index (2013-09-02 16:40:40 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> . 'perf trace' arg formatting improvements to allow masking arguments
> in syscalls such as futex and open, where the some arguments are
> ignored and thus should not be printed depending on other args.
>
> . Beautify futex open, openat, open_by_handle_at, lseek and futex syscalls.
>
> . Add dummy software event to use when wanting just to keep receiving
> PERF_RECORD_{MMAP,COMM,etc}, add test for it, from Adrian Hunter.
>
> . Fix symbol offset computation for some dsos in 'perf script', from David Ahern.
>
> . Skip unsupported hardware events in 'perf list', from Namhyung Kim.
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Adrian Hunter (3):
> perf: Add a dummy software event to keep tracking
> perf tools: Add support for PERF_COUNT_SW_DUMMY
> perf tests: Add 'keep tracking' test
>
> Arnaldo Carvalho de Melo (5):
> perf trace: Allow syscall arg formatters to mask args
> perf trace: Add beautifier for futex 'operation' parm
> perf trace: Add beautifier for lseek's whence arg
> perf trace: Add beautifier for open's flags arg
> perf trace: Tell arg formatters the arg index
>
> David Ahern (1):
> perf tools: Fix symbol offset computation for some dsos
>
> Namhyung Kim (1):
> perf list: Skip unsupported events
>
> include/uapi/linux/perf_event.h | 1 +
> tools/perf/Makefile | 1 +
> tools/perf/builtin-trace.c | 180 ++++++++++++++++++++++++++++++++++++---
> tools/perf/tests/builtin-test.c | 4 +
> tools/perf/tests/keep-tracking.c | 154 +++++++++++++++++++++++++++++++++
> tools/perf/tests/tests.h | 1 +
> tools/perf/util/evlist.c | 42 ++++++++-
> tools/perf/util/evlist.h | 5 ++
> tools/perf/util/evsel.c | 1 +
> tools/perf/util/parse-events.c | 45 +++++++++-
> tools/perf/util/parse-events.l | 1 +
> tools/perf/util/python.c | 1 +
> tools/perf/util/session.c | 1 +
> tools/perf/util/symbol.c | 5 +-
> 14 files changed, 424 insertions(+), 18 deletions(-)
> create mode 100644 tools/perf/tests/keep-tracking.c
Pulled, thanks Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2013-09-02 20:56 Arnaldo Carvalho de Melo
2013-09-03 5:49 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2013-09-02 20:56 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Adrian Hunter,
David Ahern, Frederic Weisbecker, Jiri Olsa, Mike Galbraith,
Namhyung Kim, Paul Mackerras, Peter Zijlstra, Stephane Eranian,
Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit 7bfb7e6bdd906f11ee9e751b3fec4f4fc728e818:
perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node() (2013-09-02 08:42:49 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
for you to fetch changes up to 31cd3855c98119cae287b761d8d2e75018714c5d:
perf trace: Tell arg formatters the arg index (2013-09-02 16:40:40 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
. 'perf trace' arg formatting improvements to allow masking arguments
in syscalls such as futex and open, where the some arguments are
ignored and thus should not be printed depending on other args.
. Beautify futex open, openat, open_by_handle_at, lseek and futex syscalls.
. Add dummy software event to use when wanting just to keep receiving
PERF_RECORD_{MMAP,COMM,etc}, add test for it, from Adrian Hunter.
. Fix symbol offset computation for some dsos in 'perf script', from David Ahern.
. Skip unsupported hardware events in 'perf list', from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Adrian Hunter (3):
perf: Add a dummy software event to keep tracking
perf tools: Add support for PERF_COUNT_SW_DUMMY
perf tests: Add 'keep tracking' test
Arnaldo Carvalho de Melo (5):
perf trace: Allow syscall arg formatters to mask args
perf trace: Add beautifier for futex 'operation' parm
perf trace: Add beautifier for lseek's whence arg
perf trace: Add beautifier for open's flags arg
perf trace: Tell arg formatters the arg index
David Ahern (1):
perf tools: Fix symbol offset computation for some dsos
Namhyung Kim (1):
perf list: Skip unsupported events
include/uapi/linux/perf_event.h | 1 +
tools/perf/Makefile | 1 +
tools/perf/builtin-trace.c | 180 ++++++++++++++++++++++++++++++++++++---
tools/perf/tests/builtin-test.c | 4 +
tools/perf/tests/keep-tracking.c | 154 +++++++++++++++++++++++++++++++++
tools/perf/tests/tests.h | 1 +
tools/perf/util/evlist.c | 42 ++++++++-
tools/perf/util/evlist.h | 5 ++
tools/perf/util/evsel.c | 1 +
tools/perf/util/parse-events.c | 45 +++++++++-
tools/perf/util/parse-events.l | 1 +
tools/perf/util/python.c | 1 +
tools/perf/util/session.c | 1 +
tools/perf/util/symbol.c | 5 +-
14 files changed, 424 insertions(+), 18 deletions(-)
create mode 100644 tools/perf/tests/keep-tracking.c
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2013-02-14 21:44 Arnaldo Carvalho de Melo
@ 2013-02-15 15:39 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2013-02-15 15:39 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Arnaldo Carvalho de Melo, Andi Kleen,
Borislav Petkov, Daniel Baluta, Dirk Behme, Frederic Weisbecker,
Jiri Olsa, Li Zefan, Namhyung Kim, Paul Mackerras, Pekka Enberg,
Peter Zijlstra, Vinson Lee, Arnaldo Carvalho de Melo
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
>
> Hi Ingo,
>
> Please consider pulling,
>
> - Arnaldo
>
> The following changes since commit a3d4fd7a2d81604fedfa270d29c824b8d3380c2e:
>
> Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core (2013-02-11 10:41:53 +0100)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
>
> for you to fetch changes up to 02e176af92f3e2e9ec3a48792036566af2dcd534:
>
> perf/hwbp: Fix cleanup in case of kzalloc failure (2013-02-14 17:06:39 -0300)
>
> ----------------------------------------------------------------
> perf/core improvements and fixes:
>
> . Fix cleanup in case of kzalloc failure, from Daniel Baluta.
>
> . Limit unwind support to x86 archs, fix from Jiri Olsa.
>
> . Initial GTK+ annotate browser, from Namhyung Kim.
>
> . Fix build with bison 2.3 and older, from Vinson Lee.
>
> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>
> ----------------------------------------------------------------
> Daniel Baluta (1):
> perf/hwbp: Fix cleanup in case of kzalloc failure
>
> Jiri Olsa (1):
> perf tools: Limit unwind support to x86 archs
>
> Namhyung Kim (7):
> perf buildid-cache: Add --update option
> perf annotate: Fix warning message on a missing vmlinux
> perf ui/gtk: Implement basic GTK2 annotation browser
> perf gtk/annotate: Support multiple event annotation
> perf gtk/annotate: Show source lines with gray color
> perf gtk/annotate: Fail early if it can't annotate
> perf annotate: Make it to be able to skip unannotatable symbols
>
> Vinson Lee (1):
> perf tools: Fix build with bison 2.3 and older.
>
> kernel/events/hw_breakpoint.c | 2 +-
> tools/perf/Documentation/perf-annotate.txt | 7 +-
> tools/perf/Documentation/perf-buildid-cache.txt | 4 +
> tools/perf/Makefile | 10 +-
> tools/perf/builtin-annotate.c | 27 ++-
> tools/perf/builtin-buildid-cache.c | 50 +++++-
> tools/perf/ui/gtk/annotate.c | 229 ++++++++++++++++++++++++
> tools/perf/ui/gtk/gtk.h | 1 +
> tools/perf/ui/setup.c | 2 +-
> tools/perf/util/annotate.c | 2 +-
> tools/perf/util/annotate.h | 24 +++
> tools/perf/util/parse-events.y | 1 -
> tools/perf/util/pmu.y | 1 -
> 13 files changed, 349 insertions(+), 11 deletions(-)
> create mode 100644 tools/perf/ui/gtk/annotate.c
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2013-02-14 21:44 Arnaldo Carvalho de Melo
2013-02-15 15:39 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2013-02-14 21:44 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Andi Kleen,
Borislav Petkov, Daniel Baluta, Dirk Behme, Frederic Weisbecker,
Jiri Olsa, Li Zefan, Namhyung Kim, Paul Mackerras, Pekka Enberg,
Peter Zijlstra, Vinson Lee, Arnaldo Carvalho de Melo
From: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Hi Ingo,
Please consider pulling,
- Arnaldo
The following changes since commit a3d4fd7a2d81604fedfa270d29c824b8d3380c2e:
Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core (2013-02-11 10:41:53 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux tags/perf-core-for-mingo
for you to fetch changes up to 02e176af92f3e2e9ec3a48792036566af2dcd534:
perf/hwbp: Fix cleanup in case of kzalloc failure (2013-02-14 17:06:39 -0300)
----------------------------------------------------------------
perf/core improvements and fixes:
. Fix cleanup in case of kzalloc failure, from Daniel Baluta.
. Limit unwind support to x86 archs, fix from Jiri Olsa.
. Initial GTK+ annotate browser, from Namhyung Kim.
. Fix build with bison 2.3 and older, from Vinson Lee.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------------------------------------------------------
Daniel Baluta (1):
perf/hwbp: Fix cleanup in case of kzalloc failure
Jiri Olsa (1):
perf tools: Limit unwind support to x86 archs
Namhyung Kim (7):
perf buildid-cache: Add --update option
perf annotate: Fix warning message on a missing vmlinux
perf ui/gtk: Implement basic GTK2 annotation browser
perf gtk/annotate: Support multiple event annotation
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Fail early if it can't annotate
perf annotate: Make it to be able to skip unannotatable symbols
Vinson Lee (1):
perf tools: Fix build with bison 2.3 and older.
kernel/events/hw_breakpoint.c | 2 +-
tools/perf/Documentation/perf-annotate.txt | 7 +-
tools/perf/Documentation/perf-buildid-cache.txt | 4 +
tools/perf/Makefile | 10 +-
tools/perf/builtin-annotate.c | 27 ++-
tools/perf/builtin-buildid-cache.c | 50 +++++-
tools/perf/ui/gtk/annotate.c | 229 ++++++++++++++++++++++++
tools/perf/ui/gtk/gtk.h | 1 +
tools/perf/ui/setup.c | 2 +-
tools/perf/util/annotate.c | 2 +-
tools/perf/util/annotate.h | 24 +++
tools/perf/util/parse-events.y | 1 -
tools/perf/util/pmu.y | 1 -
13 files changed, 349 insertions(+), 11 deletions(-)
create mode 100644 tools/perf/ui/gtk/annotate.c
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2011-12-20 19:18 Arnaldo Carvalho de Melo
@ 2011-12-20 19:33 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2011-12-20 19:33 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Andrew Vagin, Arun Sharma, cjashfor, David Ahern,
devel, Jiri Olsa, Johannes Schindelin, Linus Torvalds,
Namhyung Kim, Nelson Elhage, Paul Mackerras, Peter Zijlstra,
Robert Richter, arnaldo.melo
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> Hi Ingo,
>
> Please consider pulling from:
>
> git://github.com/acmel/linux.git perf/core
>
> There are still patchkits I need to merge/review, thanks everybody, the
> more, the better!
>
> I'll continue processing them tomorrow,
>
> Regards,
>
> - Arnaldo
>
> Andrew Vagin (1):
> perf record: Add ability to record event period
>
> Jiri Olsa (1):
> perf test: Add more automated tests for event parsing
>
> Namhyung Kim (6):
> perf report: Document '--call-graph' for optional print_limit argument
> perf symbols: Get rid of duplicated snprintf()
> perf symbols: Fix error path on symbol__init()
> perf tools: Fix a memory leak on perf_read_values_destroy
> perf tools: Remove stale git headlines from top comment
> perf events: Tidy up perf_event__preprocess_sample
>
> Nelson Elhage (1):
> perf evlist: Fix errno value reporting on failed mmap
>
> Robert Richter (1):
> perf evsel: Fix uninitialized memory access to struct perf_sample
>
> tools/perf/Documentation/perf-report.txt | 5 +-
> tools/perf/builtin-record.c | 1 +
> tools/perf/builtin-report.c | 6 +-
> tools/perf/builtin-test.c | 127 +++++++++++++++++++++++++++++-
> tools/perf/perf.h | 1 +
> tools/perf/util/config.c | 5 +-
> tools/perf/util/event.c | 13 ++--
> tools/perf/util/evlist.c | 4 +-
> tools/perf/util/evsel.c | 5 +-
> tools/perf/util/symbol.c | 11 +--
> tools/perf/util/usage.c | 5 +-
> tools/perf/util/values.c | 1 +
> 12 files changed, 160 insertions(+), 24 deletions(-)
Pulled, thanks a lot Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2011-12-20 19:18 Arnaldo Carvalho de Melo
2011-12-20 19:33 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2011-12-20 19:18 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Andrew Vagin,
Arun Sharma, cjashfor, David Ahern, devel, Jiri Olsa,
Johannes Schindelin, Linus Torvalds, Namhyung Kim, Nelson Elhage,
Paul Mackerras, Peter Zijlstra, Robert Richter, arnaldo.melo
Hi Ingo,
Please consider pulling from:
git://github.com/acmel/linux.git perf/core
There are still patchkits I need to merge/review, thanks everybody, the
more, the better!
I'll continue processing them tomorrow,
Regards,
- Arnaldo
Andrew Vagin (1):
perf record: Add ability to record event period
Jiri Olsa (1):
perf test: Add more automated tests for event parsing
Namhyung Kim (6):
perf report: Document '--call-graph' for optional print_limit argument
perf symbols: Get rid of duplicated snprintf()
perf symbols: Fix error path on symbol__init()
perf tools: Fix a memory leak on perf_read_values_destroy
perf tools: Remove stale git headlines from top comment
perf events: Tidy up perf_event__preprocess_sample
Nelson Elhage (1):
perf evlist: Fix errno value reporting on failed mmap
Robert Richter (1):
perf evsel: Fix uninitialized memory access to struct perf_sample
tools/perf/Documentation/perf-report.txt | 5 +-
tools/perf/builtin-record.c | 1 +
tools/perf/builtin-report.c | 6 +-
tools/perf/builtin-test.c | 127 +++++++++++++++++++++++++++++-
tools/perf/perf.h | 1 +
tools/perf/util/config.c | 5 +-
tools/perf/util/event.c | 13 ++--
tools/perf/util/evlist.c | 4 +-
tools/perf/util/evsel.c | 5 +-
tools/perf/util/symbol.c | 11 +--
tools/perf/util/usage.c | 5 +-
tools/perf/util/values.c | 1 +
12 files changed, 160 insertions(+), 24 deletions(-)
--
1.7.8.rc0.35.gee6df
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [GIT PULL 00/10] perf/core improvements and fixes
2010-08-06 1:46 Arnaldo Carvalho de Melo
@ 2010-08-06 7:00 ` Ingo Molnar
0 siblings, 0 replies; 57+ messages in thread
From: Ingo Molnar @ 2010-08-06 7:00 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: linux-kernel, Andrea Gelmini, Arnaldo Carvalho de Melo,
Frederic Weisbecker, Julia Lawall, Masami Hiramatsu,
Mike Galbraith, Nick Piggin, Paul Mackerras, Peter Zijlstra,
Peter Zijlstra, Srikar Dronamraju, Stephane Eranian,
Thomas Gleixner, Tom Zanussi
* Arnaldo Carvalho de Melo <acme@infradead.org> wrote:
> Hi Ingo,
>
> Please pull from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core
>
> Regards,
>
> - Arnaldo
>
> Andrea Gelmini (2):
> perf probe: Remove duplicated #include
> perf trace: Clean up #includes
>
> Arnaldo Carvalho de Melo (7):
> perf symbols: Store the symbol binding
> perf ui: Add a map browser
> perf ui: Shorten ui_browser->refresh_entries to refresh
> perf hists: Handle verbose in hists__sort_list_width
> perf hists: Fixup addr snprintf width on 32 bit arches
> perf ui: Add search by name/addr to the map__browser
> perf report: Speed up exit path
>
> Julia Lawall (1):
> perf timechart: Adjust confusing if indentation
>
> tools/perf/builtin-report.c | 31 +++++-
> tools/perf/builtin-timechart.c | 4 +-
> tools/perf/builtin-trace.c | 19 +--
> tools/perf/util/hist.c | 3 +
> tools/perf/util/newt.c | 242 +++++++++++++++++++++++++++++++++++++--
> tools/perf/util/probe-finder.c | 1 -
> tools/perf/util/sort.c | 6 +-
> tools/perf/util/symbol.c | 30 ++++--
> tools/perf/util/symbol.h | 1 +
> 9 files changed, 297 insertions(+), 40 deletions(-)
Pulled, thanks Arnaldo!
Ingo
^ permalink raw reply [flat|nested] 57+ messages in thread
* [GIT PULL 00/10] perf/core improvements and fixes
@ 2010-08-06 1:46 Arnaldo Carvalho de Melo
2010-08-06 7:00 ` Ingo Molnar
0 siblings, 1 reply; 57+ messages in thread
From: Arnaldo Carvalho de Melo @ 2010-08-06 1:46 UTC (permalink / raw)
To: Ingo Molnar
Cc: linux-kernel, Arnaldo Carvalho de Melo, Andrea Gelmini,
Arnaldo Carvalho de Melo, Frederic Weisbecker, Ingo Molnar,
Julia Lawall, Masami Hiramatsu, Mike Galbraith, Nick Piggin,
Paul Mackerras, Peter Zijlstra, Peter Zijlstra,
Srikar Dronamraju, Stephane Eranian, Thomas Gleixner,
Tom Zanussi
Hi Ingo,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core
Regards,
- Arnaldo
Andrea Gelmini (2):
perf probe: Remove duplicated #include
perf trace: Clean up #includes
Arnaldo Carvalho de Melo (7):
perf symbols: Store the symbol binding
perf ui: Add a map browser
perf ui: Shorten ui_browser->refresh_entries to refresh
perf hists: Handle verbose in hists__sort_list_width
perf hists: Fixup addr snprintf width on 32 bit arches
perf ui: Add search by name/addr to the map__browser
perf report: Speed up exit path
Julia Lawall (1):
perf timechart: Adjust confusing if indentation
tools/perf/builtin-report.c | 31 +++++-
tools/perf/builtin-timechart.c | 4 +-
tools/perf/builtin-trace.c | 19 +--
tools/perf/util/hist.c | 3 +
tools/perf/util/newt.c | 242 +++++++++++++++++++++++++++++++++++++--
tools/perf/util/probe-finder.c | 1 -
tools/perf/util/sort.c | 6 +-
tools/perf/util/symbol.c | 30 ++++--
tools/perf/util/symbol.h | 1 +
9 files changed, 297 insertions(+), 40 deletions(-)
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2017-08-17 7:45 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-07 16:53 [GIT PULL 00/10] perf/core improvements and fixes Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 01/10] perf build: Check LLVM version in feature check Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 02/10] perf tools: Move PERF-VERSION-FILE target into rules area Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 03/10] perf tools: Force fixdep compilation at the start of the build Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 04/10] perf tools: Move perf build related variables under non fixdep leg Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 05/10] perf sched timehist: Improve error message when analyzing wrong file Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 06/10] perf sched: Cleanup option processing Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 07/10] perf callchain: Introduce callchain_cursor__copy() Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 08/10] perf sched timehist: Handle zero sample->tid properly Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 09/10] perf sched timehist: Cleanup idle_max_cpu handling Arnaldo Carvalho de Melo
2016-12-07 16:53 ` [PATCH 10/10] perf tools: Explicitly document that --children is enabled by default Arnaldo Carvalho de Melo
2016-12-07 18:17 ` [GIT PULL 00/10] perf/core improvements and fixes Ingo Molnar
-- strict thread matches above, loose matches on Subject: below --
2017-08-16 20:20 Arnaldo Carvalho de Melo
2017-08-17 7:45 ` Ingo Molnar
2017-05-03 13:58 Arnaldo Carvalho de Melo
2017-05-03 17:30 ` Ingo Molnar
2017-01-17 16:06 Arnaldo Carvalho de Melo
2017-01-18 9:09 ` Ingo Molnar
2016-06-20 22:23 Arnaldo Carvalho de Melo
2016-06-21 2:18 ` Namhyung Kim
2016-06-21 3:11 ` Brendan Gregg
2016-06-21 10:08 ` Paolo Bonzini
2016-06-21 16:14 ` Arnaldo Carvalho de Melo
2016-05-25 21:34 Arnaldo Carvalho de Melo
2016-04-01 21:56 Arnaldo Carvalho de Melo
2016-04-06 6:47 ` Ingo Molnar
2016-02-16 20:34 Arnaldo Carvalho de Melo
2016-02-17 7:39 ` Ingo Molnar
2015-11-28 1:22 Arnaldo Carvalho de Melo
2015-11-28 9:50 ` Ingo Molnar
2015-11-29 13:16 ` Namhyung Kim
2015-08-28 18:06 Arnaldo Carvalho de Melo
2015-08-31 8:28 ` Ingo Molnar
2015-07-30 16:16 Arnaldo Carvalho de Melo
2015-07-31 8:04 ` Ingo Molnar
2015-07-31 13:30 ` Arnaldo Carvalho de Melo
2015-06-16 18:21 Arnaldo Carvalho de Melo
2015-01-29 20:23 Arnaldo Carvalho de Melo
2015-01-30 18:28 ` Ingo Molnar
2014-12-22 15:29 Arnaldo Carvalho de Melo
2014-09-26 20:19 Arnaldo Carvalho de Melo
2014-09-27 7:20 ` Ingo Molnar
2014-04-08 18:00 Jiri Olsa
[not found] ` <8738hnk3dg.fsf@tassilo.jf.intel.com>
[not found] ` <CAM9d7ciP4tLUmR-soEKH3nf6=XC5evKGfuQW1fUGA8Z42U3xCg@mail.gmail.com>
2014-04-09 5:31 ` Ingo Molnar
2013-11-14 20:25 Arnaldo Carvalho de Melo
2013-11-15 6:38 ` Ingo Molnar
2013-11-11 20:22 Arnaldo Carvalho de Melo
2013-11-05 20:09 Arnaldo Carvalho de Melo
2013-11-06 5:31 ` Ingo Molnar
2013-09-02 20:56 Arnaldo Carvalho de Melo
2013-09-03 5:49 ` Ingo Molnar
2013-02-14 21:44 Arnaldo Carvalho de Melo
2013-02-15 15:39 ` Ingo Molnar
2011-12-20 19:18 Arnaldo Carvalho de Melo
2011-12-20 19:33 ` Ingo Molnar
2010-08-06 1:46 Arnaldo Carvalho de Melo
2010-08-06 7:00 ` Ingo Molnar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).