* [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library
@ 2016-11-23 22:41 Stephen Boyd
2016-11-23 22:55 ` Scott Branden
2016-12-08 23:11 ` Stephen Boyd
0 siblings, 2 replies; 4+ messages in thread
From: Stephen Boyd @ 2016-11-23 22:41 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd
Cc: linux-kernel, linux-clk, bcm-kernel-feedback-list,
Florian Fainelli, Ray Jui, Jon Mason
The broadcom clk driver Kconfig file selects and depends on the
COMMON_CLK_IPROC config for different SoC specific drivers. Let's
simplify this by always selecting the COMMON_CLK_IPROC config,
turning it into a set of library code. We still want to retain
the SoC specific options, so we leave those in place. Since we're
here we also drop COMMON_CLK dependency because that's implicitly
handled by including this file in drivers/clk/Kconfig in the
right place and also make CLK_BCM_KONA default to y on the
architecture it exists for instead of plain default y.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/bcm/Kconfig | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index e3eed5a78404..b5ae5311b0a2 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,7 +1,6 @@
config CLK_BCM_63XX
bool "Broadcom BCM63xx clock support"
depends on ARCH_BCM_63XX || COMPILE_TEST
- depends on COMMON_CLK
select COMMON_CLK_IPROC
default ARCH_BCM_63XX
help
@@ -11,27 +10,22 @@ config CLK_BCM_63XX
config CLK_BCM_KONA
bool "Broadcom Kona CCU clock support"
depends on ARCH_BCM_MOBILE || COMPILE_TEST
- depends on COMMON_CLK
- default y
+ default ARCH_BCM_MOBILE
help
Enable common clock framework support for Broadcom SoCs
using "Kona" style clock control units, including those
in the BCM281xx and BCM21664 families.
config COMMON_CLK_IPROC
- bool "Broadcom iProc clock support"
- depends on ARCH_BCM_IPROC || ARCH_BCM_63XX || COMPILE_TEST
- depends on COMMON_CLK
- default ARCH_BCM_IPROC
+ bool
help
Enable common clock framework support for Broadcom SoCs
based on the iProc architecture
-if COMMON_CLK_IPROC
-
config CLK_BCM_CYGNUS
bool "Broadcom Cygnus clock support"
depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+ select COMMON_CLK_IPROC
default ARCH_BCM_CYGNUS
help
Enable common clock framework support for the Broadcom Cygnus SoC
@@ -39,6 +33,7 @@ config CLK_BCM_CYGNUS
config CLK_BCM_NSP
bool "Broadcom Northstar/Northstar Plus clock support"
depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST
+ select COMMON_CLK_IPROC
default ARCH_BCM_5301X || ARCH_BCM_NSP
help
Enable common clock framework support for the Broadcom Northstar and
@@ -47,8 +42,7 @@ config CLK_BCM_NSP
config CLK_BCM_NS2
bool "Broadcom Northstar 2 clock support"
depends on ARCH_BCM_IPROC || COMPILE_TEST
+ select COMMON_CLK_IPROC
default ARCH_BCM_IPROC
help
Enable common clock framework support for the Broadcom Northstar 2 SoC
-
-endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library
2016-11-23 22:41 [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library Stephen Boyd
@ 2016-11-23 22:55 ` Scott Branden
2016-11-23 23:01 ` Florian Fainelli
2016-12-08 23:11 ` Stephen Boyd
1 sibling, 1 reply; 4+ messages in thread
From: Scott Branden @ 2016-11-23 22:55 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: linux-kernel, linux-clk, bcm-kernel-feedback-list,
Florian Fainelli, Ray Jui, Jon Mason
Hi Stephen,
On 16-11-23 02:41 PM, Stephen Boyd wrote:
> The broadcom clk driver Kconfig file selects and depends on the
> COMMON_CLK_IPROC config for different SoC specific drivers. Let's
> simplify this by always selecting the COMMON_CLK_IPROC config,
> turning it into a set of library code. We still want to retain
> the SoC specific options, so we leave those in place. Since we're
> here we also drop COMMON_CLK dependency because that's implicitly
> handled by including this file in drivers/clk/Kconfig in the
> right place and also make CLK_BCM_KONA default to y on the
> architecture it exists for instead of plain default y.
>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Ray Jui <ray.jui@broadcom.com>
> Cc: Jon Mason <jonmason@broadcom.com>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> drivers/clk/bcm/Kconfig | 16 +++++-----------
> 1 file changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
> index e3eed5a78404..b5ae5311b0a2 100644
> --- a/drivers/clk/bcm/Kconfig
> +++ b/drivers/clk/bcm/Kconfig
> @@ -1,7 +1,6 @@
> config CLK_BCM_63XX
> bool "Broadcom BCM63xx clock support"
> depends on ARCH_BCM_63XX || COMPILE_TEST
> - depends on COMMON_CLK
I think the depends on COMMON_CLK needs to remain?
> select COMMON_CLK_IPROC
> default ARCH_BCM_63XX
> help
> @@ -11,27 +10,22 @@ config CLK_BCM_63XX
> config CLK_BCM_KONA
> bool "Broadcom Kona CCU clock support"
> depends on ARCH_BCM_MOBILE || COMPILE_TEST
> - depends on COMMON_CLK
I think the depends on COMMON_CLK needs to remain?
> - default y
> + default ARCH_BCM_MOBILE
> help
> Enable common clock framework support for Broadcom SoCs
> using "Kona" style clock control units, including those
> in the BCM281xx and BCM21664 families.
>
> config COMMON_CLK_IPROC
> - bool "Broadcom iProc clock support"
> - depends on ARCH_BCM_IPROC || ARCH_BCM_63XX || COMPILE_TEST
> - depends on COMMON_CLK
I think the depends on COMMON_CLK needs to remain?
> - default ARCH_BCM_IPROC
> + bool
> help
> Enable common clock framework support for Broadcom SoCs
> based on the iProc architecture
>
> -if COMMON_CLK_IPROC
> -
> config CLK_BCM_CYGNUS
> bool "Broadcom Cygnus clock support"
> depends on ARCH_BCM_CYGNUS || COMPILE_TEST
> + select COMMON_CLK_IPROC
> default ARCH_BCM_CYGNUS
> help
> Enable common clock framework support for the Broadcom Cygnus SoC
> @@ -39,6 +33,7 @@ config CLK_BCM_CYGNUS
> config CLK_BCM_NSP
> bool "Broadcom Northstar/Northstar Plus clock support"
> depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST
> + select COMMON_CLK_IPROC
> default ARCH_BCM_5301X || ARCH_BCM_NSP
> help
> Enable common clock framework support for the Broadcom Northstar and
> @@ -47,8 +42,7 @@ config CLK_BCM_NSP
> config CLK_BCM_NS2
> bool "Broadcom Northstar 2 clock support"
> depends on ARCH_BCM_IPROC || COMPILE_TEST
> + select COMMON_CLK_IPROC
> default ARCH_BCM_IPROC
> help
> Enable common clock framework support for the Broadcom Northstar 2 SoC
> -
> -endif
>
Regards,
Scott
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library
2016-11-23 22:55 ` Scott Branden
@ 2016-11-23 23:01 ` Florian Fainelli
0 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2016-11-23 23:01 UTC (permalink / raw)
To: Scott Branden, Stephen Boyd, Michael Turquette
Cc: linux-kernel, linux-clk, bcm-kernel-feedback-list, Ray Jui, Jon Mason
Le 23/11/2016 à 14:55, Scott Branden a écrit :
>> config COMMON_CLK_IPROC
>> - bool "Broadcom iProc clock support"
>> - depends on ARCH_BCM_IPROC || ARCH_BCM_63XX || COMPILE_TEST
>> - depends on COMMON_CLK
> I think the depends on COMMON_CLK needs to remain?
That's not necessary; the options are not visible if COMMON_CLK is not
already defined, see drivers/clk/Kconfig:
menu "Common Clock Framework"
depends on COMMON_CLK
...
source "drivers/clk/bcm/Kconfig"
endmenu.
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library
2016-11-23 22:41 [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library Stephen Boyd
2016-11-23 22:55 ` Scott Branden
@ 2016-12-08 23:11 ` Stephen Boyd
1 sibling, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2016-12-08 23:11 UTC (permalink / raw)
To: Michael Turquette
Cc: linux-kernel, linux-clk, bcm-kernel-feedback-list,
Florian Fainelli, Ray Jui, Jon Mason
On 11/23, Stephen Boyd wrote:
> The broadcom clk driver Kconfig file selects and depends on the
> COMMON_CLK_IPROC config for different SoC specific drivers. Let's
> simplify this by always selecting the COMMON_CLK_IPROC config,
> turning it into a set of library code. We still want to retain
> the SoC specific options, so we leave those in place. Since we're
> here we also drop COMMON_CLK dependency because that's implicitly
> handled by including this file in drivers/clk/Kconfig in the
> right place and also make CLK_BCM_KONA default to y on the
> architecture it exists for instead of plain default y.
>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Ray Jui <ray.jui@broadcom.com>
> Cc: Jon Mason <jonmason@broadcom.com>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
Applied to clk-next
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-12-08 23:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-23 22:41 [PATCH] clk: bcm: Make COMMON_CLK_IPROC into a library Stephen Boyd
2016-11-23 22:55 ` Scott Branden
2016-11-23 23:01 ` Florian Fainelli
2016-12-08 23:11 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).