Re: [PATCH 2/3] ARM: dts: sun5i: add a pinctrl node for 4bit mmc2

Re: [PATCH 2/3] ARM: dts: sun5i: add a pinctrl node for 4bit mmc2

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 327 bytes --]

On Thu, Dec 22, 2016 at 04:02:34AM +0800, Icenowy Zheng wrote:
> Some board only use 4bit mode of mmc2.
> 
> Add a pinctrl node for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 1/3] dt-bindings: add vendor prefix for Lichee Pi

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 460 bytes --]

On Thu, Dec 22, 2016 at 04:02:33AM +0800, Icenowy Zheng wrote:
> Lichee Pi is a new "Pi"-named development board series.
> 
> Currently available device, Lichee Pi One, is by only one person as
> night job, so the device series name is chosen to be the vendor prefix.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 3/3] ARM: dts: sun5i: add support for Lichee Pi One board

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 632 bytes --]

On Thu, Dec 22, 2016 at 04:02:35AM +0800, Icenowy Zheng wrote:
> Lichee Pi One is a low-cost Allwinner A13-based development board, with
> an AXP209 PMU, a USB2.0 OTG port, a USB2.0 host port (or an onboard
> RTL8723BU Wi-Fi card), optional headers for LCD and CSI, two GPIO
> headers and two MicroSD card slots (connected to mmc0 and mmc2, both
> bootable).
> 
> Add support for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH 3/3] ARM: dts: sun5i: add support for Lichee Pi One board

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 892 bytes --]

On Thu, Dec 22, 2016 at 08:07:11AM +0800, Icenowy Zheng wrote:
> 
> 
> 22.12.2016, 06:42, "Maxime Ripard" <maxime.ripard@free-electrons.com>:
> > On Thu, Dec 22, 2016 at 04:02:35AM +0800, Icenowy Zheng wrote:
> >>  Lichee Pi One is a low-cost Allwinner A13-based development board, with
> >>  an AXP209 PMU, a USB2.0 OTG port, a USB2.0 host port (or an onboard
> >>  RTL8723BU Wi-Fi card), optional headers for LCD and CSI, two GPIO
> >>  headers and two MicroSD card slots (connected to mmc0 and mmc2, both
> >>  bootable).
> >>
> >>  Add support for it.
> >>
> >>  Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> >
> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> 
> Excuse me. Who should apply it?

Gaaah, sorry, I meant I applied it...

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]