* [PATCH 1/5] clk: mvebu: support for 98DX3236 SoC
[not found] <20161222041328.3303-1-chris.packham@alliedtelesis.co.nz>
@ 2016-12-22 4:13 ` Chris Packham
2017-01-04 17:32 ` Gregory CLEMENT
2016-12-22 4:13 ` [PATCH 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Chris Packham @ 2016-12-22 4:13 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Chris Packham, Michael Turquette, Stephen Boyd, Gregory CLEMENT,
Thomas Petazzoni, Russell King, linux-kernel, linux-clk
The 98DX3236, 98DX3336, 98DX4521 and variants have a different TCLK from
the Armada XP (200MHz vs 250MHz). The CPU core clock is fixed at 800MHz.
The clock gating options are a subset of those on the Armada XP.
The core clock divider is different to the Armada XP also.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
drivers/clk/mvebu/Makefile | 2 +-
drivers/clk/mvebu/armada-xp.c | 42 +++++++
drivers/clk/mvebu/clk-cpu.c | 33 +++++-
drivers/clk/mvebu/mv98dx3236-corediv.c | 207 +++++++++++++++++++++++++++++++++
4 files changed, 280 insertions(+), 4 deletions(-)
create mode 100644 drivers/clk/mvebu/mv98dx3236-corediv.c
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index d9ae97fb43c4..6a3681e3d6db 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_ARMADA_39X_CLK) += armada-39x.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-xtal.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-tbg.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-periph.o
-obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o
+obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o mv98dx3236-corediv.o
obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
obj-$(CONFIG_DOVE_CLK) += dove.o dove-divider.o
diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
index b3094315a3c0..0413bf8284e0 100644
--- a/drivers/clk/mvebu/armada-xp.c
+++ b/drivers/clk/mvebu/armada-xp.c
@@ -52,6 +52,12 @@ static u32 __init axp_get_tclk_freq(void __iomem *sar)
return 250000000;
}
+/* MV98DX3236 TCLK frequency is fixed to 200MHz */
+static u32 __init mv98dx3236_get_tclk_freq(void __iomem *sar)
+{
+ return 200000000;
+}
+
static const u32 axp_cpu_freqs[] __initconst = {
1000000000,
1066000000,
@@ -89,6 +95,12 @@ static u32 __init axp_get_cpu_freq(void __iomem *sar)
return cpu_freq;
}
+/* MV98DX3236 CLK frequency is fixed to 800MHz */
+static u32 __init mv98dx3236_get_cpu_freq(void __iomem *sar)
+{
+ return 800000000;
+}
+
static const int axp_nbclk_ratios[32][2] __initconst = {
{0, 1}, {1, 2}, {2, 2}, {2, 2},
{1, 2}, {1, 2}, {1, 1}, {2, 3},
@@ -158,6 +170,14 @@ static const struct coreclk_soc_desc axp_coreclks = {
.num_ratios = ARRAY_SIZE(axp_coreclk_ratios),
};
+static const struct coreclk_soc_desc mv98dx3236_coreclks = {
+ .get_tclk_freq = mv98dx3236_get_tclk_freq,
+ .get_cpu_freq = mv98dx3236_get_cpu_freq,
+ .get_clk_ratio = NULL,
+ .ratios = NULL,
+ .num_ratios = 0,
+};
+
/*
* Clock Gating Control
*/
@@ -195,6 +215,15 @@ static const struct clk_gating_soc_desc axp_gating_desc[] __initconst = {
{ }
};
+static const struct clk_gating_soc_desc mv98dx3236_gating_desc[] __initconst = {
+ { "ge1", NULL, 3, 0 },
+ { "ge0", NULL, 4, 0 },
+ { "pex00", NULL, 5, 0 },
+ { "sdio", NULL, 17, 0 },
+ { "xor0", NULL, 22, 0 },
+ { }
+};
+
static void __init axp_clk_init(struct device_node *np)
{
struct device_node *cgnp =
@@ -206,3 +235,16 @@ static void __init axp_clk_init(struct device_node *np)
mvebu_clk_gating_setup(cgnp, axp_gating_desc);
}
CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);
+
+static void __init mv98dx3236_clk_init(struct device_node *np)
+{
+ struct device_node *cgnp =
+ of_find_compatible_node(NULL, NULL, "marvell,armada-xp-gating-clock");
+
+ mvebu_coreclk_setup(np, &mv98dx3236_coreclks);
+
+ if (cgnp)
+ mvebu_clk_gating_setup(cgnp, mv98dx3236_gating_desc);
+}
+CLK_OF_DECLARE(mv98dx3236_clk, "marvell,mv98dx3236-core-clock",
+ mv98dx3236_clk_init);
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
index 5837eb8a212f..29f295e7a36b 100644
--- a/drivers/clk/mvebu/clk-cpu.c
+++ b/drivers/clk/mvebu/clk-cpu.c
@@ -165,7 +165,9 @@ static const struct clk_ops cpu_ops = {
.set_rate = clk_cpu_set_rate,
};
-static void __init of_cpu_clk_setup(struct device_node *node)
+/* Add parameter to allow this to support different clock operations. */
+static void __init _of_cpu_clk_setup(struct device_node *node,
+ const struct clk_ops *cpu_clk_ops)
{
struct cpu_clk *cpuclk;
void __iomem *clock_complex_base = of_iomap(node, 0);
@@ -218,7 +220,7 @@ static void __init of_cpu_clk_setup(struct device_node *node)
cpuclk[cpu].hw.init = &init;
init.name = cpuclk[cpu].clk_name;
- init.ops = &cpu_ops;
+ init.ops = cpu_clk_ops;
init.flags = 0;
init.parent_names = &cpuclk[cpu].parent_name;
init.num_parents = 1;
@@ -243,5 +245,30 @@ static void __init of_cpu_clk_setup(struct device_node *node)
iounmap(clock_complex_base);
}
+/* Use this function to call the generic setup with the correct
+ * clock operation
+ */
+static void __init of_cpu_clk_setup(struct device_node *node)
+{
+ _of_cpu_clk_setup(node, &cpu_ops);
+}
+
CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
- of_cpu_clk_setup);
+ of_cpu_clk_setup);
+
+/* Define the clock and operations for the mv98dx3236 - it cannot perform
+ * any operations.
+ */
+static const struct clk_ops mv98dx3236_cpu_ops = {
+ .recalc_rate = NULL,
+ .round_rate = NULL,
+ .set_rate = NULL,
+};
+
+static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
+{
+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
+}
+
+CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
+ of_mv98dx3236_cpu_clk_setup);
diff --git a/drivers/clk/mvebu/mv98dx3236-corediv.c b/drivers/clk/mvebu/mv98dx3236-corediv.c
new file mode 100644
index 000000000000..3060764a8e5d
--- /dev/null
+++ b/drivers/clk/mvebu/mv98dx3236-corediv.c
@@ -0,0 +1,207 @@
+/*
+ * MV98DX3236 Core divider clock
+ *
+ * Copyright (C) 2015 Allied Telesis Labs
+ *
+ * Based on armada-xp-corediv.c
+ * Copyright (C) 2015 Marvell
+ *
+ * John Thompson <john.thompson@alliedtelesis.co.nz>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "common.h"
+
+#define CORE_CLK_DIV_RATIO_MASK 0xff
+
+#define CLK_DIV_RATIO_NAND_MASK 0x0f
+#define CLK_DIV_RATIO_NAND_OFFSET 6
+#define CLK_DIV_RATIO_NAND_FORCE_RELOAD_BIT 26
+
+#define RATIO_RELOAD_BIT BIT(10)
+#define RATIO_REG_OFFSET 0x08
+
+/*
+ * This structure represents one core divider clock for the clock
+ * framework, and is dynamically allocated for each core divider clock
+ * existing in the current SoC.
+ */
+struct clk_corediv {
+ struct clk_hw hw;
+ void __iomem *reg;
+ spinlock_t lock;
+};
+
+static struct clk_onecell_data clk_data;
+
+
+#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw)
+
+static int mv98dx3236_corediv_is_enabled(struct clk_hw *hwclk)
+{
+ /* Core divider is always active */
+ return 1;
+}
+
+static int mv98dx3236_corediv_enable(struct clk_hw *hwclk)
+{
+ /* always succeeds */
+ return 0;
+}
+
+static void mv98dx3236_corediv_disable(struct clk_hw *hwclk)
+{
+ /* can't be disabled so is left alone */
+}
+
+static unsigned long mv98dx3236_corediv_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct clk_corediv *corediv = to_corediv_clk(hwclk);
+ u32 reg, div;
+
+ reg = readl(corediv->reg + RATIO_REG_OFFSET);
+ div = (reg >> CLK_DIV_RATIO_NAND_OFFSET) & CLK_DIV_RATIO_NAND_MASK;
+ return parent_rate / div;
+}
+
+static long mv98dx3236_corediv_round_rate(struct clk_hw *hwclk,
+ unsigned long rate, unsigned long *parent_rate)
+{
+ /* Valid ratio are 1:4, 1:5, 1:6 and 1:8 */
+ u32 div;
+
+ div = *parent_rate / rate;
+ if (div < 4)
+ div = 4;
+ else if (div > 6)
+ div = 8;
+
+ return *parent_rate / div;
+}
+
+static int mv98dx3236_corediv_set_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_corediv *corediv = to_corediv_clk(hwclk);
+ unsigned long flags = 0;
+ u32 reg, div;
+
+ div = parent_rate / rate;
+
+ spin_lock_irqsave(&corediv->lock, flags);
+
+ /* Write new divider to the divider ratio register */
+ reg = readl(corediv->reg + RATIO_REG_OFFSET);
+ reg &= ~(CLK_DIV_RATIO_NAND_MASK << CLK_DIV_RATIO_NAND_OFFSET);
+ reg |= (div & CLK_DIV_RATIO_NAND_MASK) << CLK_DIV_RATIO_NAND_OFFSET;
+ writel(reg, corediv->reg + RATIO_REG_OFFSET);
+
+ /* Set reload-force for this clock */
+ reg = readl(corediv->reg) | BIT(CLK_DIV_RATIO_NAND_FORCE_RELOAD_BIT);
+ writel(reg, corediv->reg);
+
+ /* Now trigger the clock update */
+ reg = readl(corediv->reg + RATIO_REG_OFFSET) | RATIO_RELOAD_BIT;
+ writel(reg, corediv->reg + RATIO_REG_OFFSET);
+
+ /*
+ * Wait for clocks to settle down, and then clear all the
+ * ratios request and the reload request.
+ */
+ udelay(1000);
+ reg &= ~(CORE_CLK_DIV_RATIO_MASK | RATIO_RELOAD_BIT);
+ writel(reg, corediv->reg + RATIO_REG_OFFSET);
+ udelay(1000);
+
+ spin_unlock_irqrestore(&corediv->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops ops = {
+ .enable = mv98dx3236_corediv_enable,
+ .disable = mv98dx3236_corediv_disable,
+ .is_enabled = mv98dx3236_corediv_is_enabled,
+ .recalc_rate = mv98dx3236_corediv_recalc_rate,
+ .round_rate = mv98dx3236_corediv_round_rate,
+ .set_rate = mv98dx3236_corediv_set_rate,
+};
+
+static void __init mv98dx3236_corediv_clk_init(struct device_node *node)
+{
+ struct clk_init_data init;
+ struct clk_corediv *corediv;
+ struct clk **clks;
+ void __iomem *base;
+ const __be32 *off;
+ const char *parent_name;
+ const char *clk_name;
+ int len;
+ struct device_node *dfx_node;
+
+ dfx_node = of_parse_phandle(node, "base", 0);
+ if (WARN_ON(!dfx_node))
+ return;
+
+ off = of_get_property(node, "reg", &len);
+ if (WARN_ON(!off))
+ return;
+
+ base = of_iomap(dfx_node, 0);
+ if (WARN_ON(!base))
+ return;
+
+ of_node_put(dfx_node);
+
+ parent_name = of_clk_get_parent_name(node, 0);
+
+ clk_data.clk_num = 1;
+
+ /* clks holds the clock array */
+ clks = kcalloc(clk_data.clk_num, sizeof(struct clk *),
+ GFP_KERNEL);
+ if (WARN_ON(!clks))
+ goto err_unmap;
+ /* corediv holds the clock specific array */
+ corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv),
+ GFP_KERNEL);
+ if (WARN_ON(!corediv))
+ goto err_free_clks;
+
+ spin_lock_init(&corediv->lock);
+
+ of_property_read_string_index(node, "clock-output-names",
+ 0, &clk_name);
+
+ init.num_parents = 1;
+ init.parent_names = &parent_name;
+ init.name = clk_name;
+ init.ops = &ops;
+ init.flags = 0;
+
+ corediv[0].reg = (void *)((int)base + be32_to_cpu(*off));
+ corediv[0].hw.init = &init;
+
+ clks[0] = clk_register(NULL, &corediv[0].hw);
+ WARN_ON(IS_ERR(clks[0]));
+
+ clk_data.clks = clks;
+ of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+ return;
+
+err_free_clks:
+ kfree(clks);
+err_unmap:
+ iounmap(base);
+}
+
+CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
+ mv98dx3236_corediv_clk_init);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 1/5] clk: mvebu: support for 98DX3236 SoC
2016-12-22 4:13 ` [PATCH 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
@ 2017-01-04 17:32 ` Gregory CLEMENT
0 siblings, 0 replies; 10+ messages in thread
From: Gregory CLEMENT @ 2017-01-04 17:32 UTC (permalink / raw)
To: Chris Packham
Cc: linux-arm-kernel, Michael Turquette, Stephen Boyd,
Thomas Petazzoni, Russell King, linux-kernel, linux-clk
Hi Chris,
On jeu., déc. 22 2016, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
> The 98DX3236, 98DX3336, 98DX4521 and variants have a different TCLK from
> the Armada XP (200MHz vs 250MHz). The CPU core clock is fixed at 800MHz.
>
> The clock gating options are a subset of those on the Armada XP.
>
> The core clock divider is different to the Armada XP also.
This patch looks good, however you should update the device tree binding
documentation too.
Thanks,
Gregory
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> drivers/clk/mvebu/Makefile | 2 +-
> drivers/clk/mvebu/armada-xp.c | 42 +++++++
> drivers/clk/mvebu/clk-cpu.c | 33 +++++-
> drivers/clk/mvebu/mv98dx3236-corediv.c | 207 +++++++++++++++++++++++++++++++++
> 4 files changed, 280 insertions(+), 4 deletions(-)
> create mode 100644 drivers/clk/mvebu/mv98dx3236-corediv.c
>
> diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
> index d9ae97fb43c4..6a3681e3d6db 100644
> --- a/drivers/clk/mvebu/Makefile
> +++ b/drivers/clk/mvebu/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_ARMADA_39X_CLK) += armada-39x.o
> obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-xtal.o
> obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-tbg.o
> obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-periph.o
> -obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o
> +obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o mv98dx3236-corediv.o
> obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
> obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
> obj-$(CONFIG_DOVE_CLK) += dove.o dove-divider.o
> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
> index b3094315a3c0..0413bf8284e0 100644
> --- a/drivers/clk/mvebu/armada-xp.c
> +++ b/drivers/clk/mvebu/armada-xp.c
> @@ -52,6 +52,12 @@ static u32 __init axp_get_tclk_freq(void __iomem *sar)
> return 250000000;
> }
>
> +/* MV98DX3236 TCLK frequency is fixed to 200MHz */
> +static u32 __init mv98dx3236_get_tclk_freq(void __iomem *sar)
> +{
> + return 200000000;
> +}
> +
> static const u32 axp_cpu_freqs[] __initconst = {
> 1000000000,
> 1066000000,
> @@ -89,6 +95,12 @@ static u32 __init axp_get_cpu_freq(void __iomem *sar)
> return cpu_freq;
> }
>
> +/* MV98DX3236 CLK frequency is fixed to 800MHz */
> +static u32 __init mv98dx3236_get_cpu_freq(void __iomem *sar)
> +{
> + return 800000000;
> +}
> +
> static const int axp_nbclk_ratios[32][2] __initconst = {
> {0, 1}, {1, 2}, {2, 2}, {2, 2},
> {1, 2}, {1, 2}, {1, 1}, {2, 3},
> @@ -158,6 +170,14 @@ static const struct coreclk_soc_desc axp_coreclks = {
> .num_ratios = ARRAY_SIZE(axp_coreclk_ratios),
> };
>
> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
> + .get_clk_ratio = NULL,
> + .ratios = NULL,
> + .num_ratios = 0,
> +};
> +
> /*
> * Clock Gating Control
> */
> @@ -195,6 +215,15 @@ static const struct clk_gating_soc_desc axp_gating_desc[] __initconst = {
> { }
> };
>
> +static const struct clk_gating_soc_desc mv98dx3236_gating_desc[] __initconst = {
> + { "ge1", NULL, 3, 0 },
> + { "ge0", NULL, 4, 0 },
> + { "pex00", NULL, 5, 0 },
> + { "sdio", NULL, 17, 0 },
> + { "xor0", NULL, 22, 0 },
> + { }
> +};
> +
> static void __init axp_clk_init(struct device_node *np)
> {
> struct device_node *cgnp =
> @@ -206,3 +235,16 @@ static void __init axp_clk_init(struct device_node *np)
> mvebu_clk_gating_setup(cgnp, axp_gating_desc);
> }
> CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);
> +
> +static void __init mv98dx3236_clk_init(struct device_node *np)
> +{
> + struct device_node *cgnp =
> + of_find_compatible_node(NULL, NULL, "marvell,armada-xp-gating-clock");
> +
> + mvebu_coreclk_setup(np, &mv98dx3236_coreclks);
> +
> + if (cgnp)
> + mvebu_clk_gating_setup(cgnp, mv98dx3236_gating_desc);
> +}
> +CLK_OF_DECLARE(mv98dx3236_clk, "marvell,mv98dx3236-core-clock",
> + mv98dx3236_clk_init);
> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
> index 5837eb8a212f..29f295e7a36b 100644
> --- a/drivers/clk/mvebu/clk-cpu.c
> +++ b/drivers/clk/mvebu/clk-cpu.c
> @@ -165,7 +165,9 @@ static const struct clk_ops cpu_ops = {
> .set_rate = clk_cpu_set_rate,
> };
>
> -static void __init of_cpu_clk_setup(struct device_node *node)
> +/* Add parameter to allow this to support different clock operations. */
> +static void __init _of_cpu_clk_setup(struct device_node *node,
> + const struct clk_ops *cpu_clk_ops)
> {
> struct cpu_clk *cpuclk;
> void __iomem *clock_complex_base = of_iomap(node, 0);
> @@ -218,7 +220,7 @@ static void __init of_cpu_clk_setup(struct device_node *node)
> cpuclk[cpu].hw.init = &init;
>
> init.name = cpuclk[cpu].clk_name;
> - init.ops = &cpu_ops;
> + init.ops = cpu_clk_ops;
> init.flags = 0;
> init.parent_names = &cpuclk[cpu].parent_name;
> init.num_parents = 1;
> @@ -243,5 +245,30 @@ static void __init of_cpu_clk_setup(struct device_node *node)
> iounmap(clock_complex_base);
> }
>
> +/* Use this function to call the generic setup with the correct
> + * clock operation
> + */
> +static void __init of_cpu_clk_setup(struct device_node *node)
> +{
> + _of_cpu_clk_setup(node, &cpu_ops);
> +}
> +
> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
> - of_cpu_clk_setup);
> + of_cpu_clk_setup);
> +
> +/* Define the clock and operations for the mv98dx3236 - it cannot perform
> + * any operations.
> + */
> +static const struct clk_ops mv98dx3236_cpu_ops = {
> + .recalc_rate = NULL,
> + .round_rate = NULL,
> + .set_rate = NULL,
> +};
> +
> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
> +{
> + _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
> +}
> +
> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
> + of_mv98dx3236_cpu_clk_setup);
> diff --git a/drivers/clk/mvebu/mv98dx3236-corediv.c b/drivers/clk/mvebu/mv98dx3236-corediv.c
> new file mode 100644
> index 000000000000..3060764a8e5d
> --- /dev/null
> +++ b/drivers/clk/mvebu/mv98dx3236-corediv.c
> @@ -0,0 +1,207 @@
> +/*
> + * MV98DX3236 Core divider clock
> + *
> + * Copyright (C) 2015 Allied Telesis Labs
> + *
> + * Based on armada-xp-corediv.c
> + * Copyright (C) 2015 Marvell
> + *
> + * John Thompson <john.thompson@alliedtelesis.co.nz>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/kernel.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include "common.h"
> +
> +#define CORE_CLK_DIV_RATIO_MASK 0xff
> +
> +#define CLK_DIV_RATIO_NAND_MASK 0x0f
> +#define CLK_DIV_RATIO_NAND_OFFSET 6
> +#define CLK_DIV_RATIO_NAND_FORCE_RELOAD_BIT 26
> +
> +#define RATIO_RELOAD_BIT BIT(10)
> +#define RATIO_REG_OFFSET 0x08
> +
> +/*
> + * This structure represents one core divider clock for the clock
> + * framework, and is dynamically allocated for each core divider clock
> + * existing in the current SoC.
> + */
> +struct clk_corediv {
> + struct clk_hw hw;
> + void __iomem *reg;
> + spinlock_t lock;
> +};
> +
> +static struct clk_onecell_data clk_data;
> +
> +
> +#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw)
> +
> +static int mv98dx3236_corediv_is_enabled(struct clk_hw *hwclk)
> +{
> + /* Core divider is always active */
> + return 1;
> +}
> +
> +static int mv98dx3236_corediv_enable(struct clk_hw *hwclk)
> +{
> + /* always succeeds */
> + return 0;
> +}
> +
> +static void mv98dx3236_corediv_disable(struct clk_hw *hwclk)
> +{
> + /* can't be disabled so is left alone */
> +}
> +
> +static unsigned long mv98dx3236_corediv_recalc_rate(struct clk_hw *hwclk,
> + unsigned long parent_rate)
> +{
> + struct clk_corediv *corediv = to_corediv_clk(hwclk);
> + u32 reg, div;
> +
> + reg = readl(corediv->reg + RATIO_REG_OFFSET);
> + div = (reg >> CLK_DIV_RATIO_NAND_OFFSET) & CLK_DIV_RATIO_NAND_MASK;
> + return parent_rate / div;
> +}
> +
> +static long mv98dx3236_corediv_round_rate(struct clk_hw *hwclk,
> + unsigned long rate, unsigned long *parent_rate)
> +{
> + /* Valid ratio are 1:4, 1:5, 1:6 and 1:8 */
> + u32 div;
> +
> + div = *parent_rate / rate;
> + if (div < 4)
> + div = 4;
> + else if (div > 6)
> + div = 8;
> +
> + return *parent_rate / div;
> +}
> +
> +static int mv98dx3236_corediv_set_rate(struct clk_hw *hwclk, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_corediv *corediv = to_corediv_clk(hwclk);
> + unsigned long flags = 0;
> + u32 reg, div;
> +
> + div = parent_rate / rate;
> +
> + spin_lock_irqsave(&corediv->lock, flags);
> +
> + /* Write new divider to the divider ratio register */
> + reg = readl(corediv->reg + RATIO_REG_OFFSET);
> + reg &= ~(CLK_DIV_RATIO_NAND_MASK << CLK_DIV_RATIO_NAND_OFFSET);
> + reg |= (div & CLK_DIV_RATIO_NAND_MASK) << CLK_DIV_RATIO_NAND_OFFSET;
> + writel(reg, corediv->reg + RATIO_REG_OFFSET);
> +
> + /* Set reload-force for this clock */
> + reg = readl(corediv->reg) | BIT(CLK_DIV_RATIO_NAND_FORCE_RELOAD_BIT);
> + writel(reg, corediv->reg);
> +
> + /* Now trigger the clock update */
> + reg = readl(corediv->reg + RATIO_REG_OFFSET) | RATIO_RELOAD_BIT;
> + writel(reg, corediv->reg + RATIO_REG_OFFSET);
> +
> + /*
> + * Wait for clocks to settle down, and then clear all the
> + * ratios request and the reload request.
> + */
> + udelay(1000);
> + reg &= ~(CORE_CLK_DIV_RATIO_MASK | RATIO_RELOAD_BIT);
> + writel(reg, corediv->reg + RATIO_REG_OFFSET);
> + udelay(1000);
> +
> + spin_unlock_irqrestore(&corediv->lock, flags);
> +
> + return 0;
> +}
> +
> +static const struct clk_ops ops = {
> + .enable = mv98dx3236_corediv_enable,
> + .disable = mv98dx3236_corediv_disable,
> + .is_enabled = mv98dx3236_corediv_is_enabled,
> + .recalc_rate = mv98dx3236_corediv_recalc_rate,
> + .round_rate = mv98dx3236_corediv_round_rate,
> + .set_rate = mv98dx3236_corediv_set_rate,
> +};
> +
> +static void __init mv98dx3236_corediv_clk_init(struct device_node *node)
> +{
> + struct clk_init_data init;
> + struct clk_corediv *corediv;
> + struct clk **clks;
> + void __iomem *base;
> + const __be32 *off;
> + const char *parent_name;
> + const char *clk_name;
> + int len;
> + struct device_node *dfx_node;
> +
> + dfx_node = of_parse_phandle(node, "base", 0);
> + if (WARN_ON(!dfx_node))
> + return;
> +
> + off = of_get_property(node, "reg", &len);
> + if (WARN_ON(!off))
> + return;
> +
> + base = of_iomap(dfx_node, 0);
> + if (WARN_ON(!base))
> + return;
> +
> + of_node_put(dfx_node);
> +
> + parent_name = of_clk_get_parent_name(node, 0);
> +
> + clk_data.clk_num = 1;
> +
> + /* clks holds the clock array */
> + clks = kcalloc(clk_data.clk_num, sizeof(struct clk *),
> + GFP_KERNEL);
> + if (WARN_ON(!clks))
> + goto err_unmap;
> + /* corediv holds the clock specific array */
> + corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv),
> + GFP_KERNEL);
> + if (WARN_ON(!corediv))
> + goto err_free_clks;
> +
> + spin_lock_init(&corediv->lock);
> +
> + of_property_read_string_index(node, "clock-output-names",
> + 0, &clk_name);
> +
> + init.num_parents = 1;
> + init.parent_names = &parent_name;
> + init.name = clk_name;
> + init.ops = &ops;
> + init.flags = 0;
> +
> + corediv[0].reg = (void *)((int)base + be32_to_cpu(*off));
> + corediv[0].hw.init = &init;
> +
> + clks[0] = clk_register(NULL, &corediv[0].hw);
> + WARN_ON(IS_ERR(clks[0]));
> +
> + clk_data.clks = clks;
> + of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
> + return;
> +
> +err_free_clks:
> + kfree(clks);
> +err_unmap:
> + iounmap(base);
> +}
> +
> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
> + mv98dx3236_corediv_clk_init);
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/5] arm: mvebu: support for SMP on 98DX3336 SoC
[not found] <20161222041328.3303-1-chris.packham@alliedtelesis.co.nz>
2016-12-22 4:13 ` [PATCH 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
@ 2016-12-22 4:13 ` Chris Packham
2016-12-22 22:47 ` Rob Herring
2016-12-22 4:13 ` [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Chris Packham @ 2016-12-22 4:13 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Chris Packham, Rob Herring, Mark Rutland, Jason Cooper,
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth,
Russell King, devicetree, linux-kernel
Compared to the armada-xp the 98DX3336 uses different registers to set
the boot address for the secondary CPU so a new enable-method is needed.
This will only work if the machine definition doesn't define an overall
smp_ops because there is not currently a way of overriding this from the
device tree if it is set in the machine definition.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
.../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 18 ++++++
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/common.h | 1 +
arch/arm/mach-mvebu/platsmp.c | 43 ++++++++++++++
arch/arm/mach-mvebu/pmsu-98dx3236.c | 69 ++++++++++++++++++++++
5 files changed, 132 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
create mode 100644 arch/arm/mach-mvebu/pmsu-98dx3236.c
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
new file mode 100644
index 000000000000..8082ba872edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
@@ -0,0 +1,18 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+};
+
+
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 6c6497e80a7b..2a2dd8324fb8 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+obj-y += pmsu-98dx3236.o
obj-$(CONFIG_PM) += pm.o pm-board.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 6b775492cfad..099dabf23461 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -27,4 +27,5 @@ void __iomem *mvebu_get_scu_base(void);
int mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
u32 srcmd));
+void mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
#endif
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 46c742d3bd41..3c9ab9a008ad 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -182,5 +182,48 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
#endif
};
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ int ret, hw_cpu;
+
+ pr_info("Booting CPU %d\n", cpu);
+
+ hw_cpu = cpu_logical_map(cpu);
+ set_secondary_cpu_clock(hw_cpu);
+ mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+ armada_xp_secondary_startup);
+
+ /*
+ * This is needed to wake up CPUs in the offline state after
+ * using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * This is needed to take secondary CPUs out of reset on the
+ * initial boot.
+ */
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_warn("unable to boot CPU: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+struct smp_operations mv98dx3236_smp_ops __initdata = {
+ .smp_init_cpus = armada_xp_smp_init_cpus,
+ .smp_prepare_cpus = armada_xp_smp_prepare_cpus,
+ .smp_boot_secondary = mv98dx3236_boot_secondary,
+ .smp_secondary_init = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_xp_cpu_die,
+ .cpu_kill = armada_xp_cpu_kill,
+#endif
+};
+
CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
&armada_xp_smp_ops);
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+ &mv98dx3236_smp_ops);
diff --git a/arch/arm/mach-mvebu/pmsu-98dx3236.c b/arch/arm/mach-mvebu/pmsu-98dx3236.c
new file mode 100644
index 000000000000..fadc81d0c051
--- /dev/null
+++ b/arch/arm/mach-mvebu/pmsu-98dx3236.c
@@ -0,0 +1,69 @@
+/**
+ * CPU resume support for 98DX4521 internal CPU (a.k.a. MSYS).
+ */
+
+#define pr_fmt(fmt) "mv98dx3236-resume: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include "common.h"
+
+static void __iomem *mv98dx3236_resume_base;
+#define MV98DX3236_CPU_RESUME_CTRL_OFFSET 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_OFFSET 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+ {.compatible = "marvell,98dx3336-resume-ctrl",},
+ { /* end of list */ },
+};
+
+void mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+ WARN_ON(hw_cpu != 1);
+
+ writel(0, mv98dx3236_resume_base + MV98DX3236_CPU_RESUME_CTRL_OFFSET);
+ writel(virt_to_phys(boot_addr), mv98dx3236_resume_base +
+ MV98DX3236_CPU_RESUME_ADDR_OFFSET);
+}
+
+static int __init mv98dx3236_resume_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ int ret = 0;
+
+ np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+ if (!np)
+ return 0;
+
+ pr_info("Initializing 98DX4521 Resume\n");
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("unable to get resource\n");
+ ret = -ENOENT;
+ goto out;
+ }
+
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ pr_err("unable to request region\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ mv98dx3236_resume_base = ioremap(res.start, resource_size(&res));
+ if (!mv98dx3236_resume_base) {
+ pr_err("unable to map registers\n");
+ release_mem_region(res.start, resource_size(&res));
+ ret = -ENOMEM;
+ goto out;
+ }
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+early_initcall(mv98dx3236_resume_init);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 2/5] arm: mvebu: support for SMP on 98DX3336 SoC
2016-12-22 4:13 ` [PATCH 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
@ 2016-12-22 22:47 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2016-12-22 22:47 UTC (permalink / raw)
To: Chris Packham
Cc: linux-arm-kernel, Mark Rutland, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Russell King, devicetree,
linux-kernel
On Thu, Dec 22, 2016 at 05:13:25PM +1300, Chris Packham wrote:
> Compared to the armada-xp the 98DX3336 uses different registers to set
> the boot address for the secondary CPU so a new enable-method is needed.
> This will only work if the machine definition doesn't define an overall
> smp_ops because there is not currently a way of overriding this from the
> device tree if it is set in the machine definition.
Doesn't look like you documented the enable-method value.
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 18 ++++++
> arch/arm/mach-mvebu/Makefile | 1 +
> arch/arm/mach-mvebu/common.h | 1 +
> arch/arm/mach-mvebu/platsmp.c | 43 ++++++++++++++
> arch/arm/mach-mvebu/pmsu-98dx3236.c | 69 ++++++++++++++++++++++
> 5 files changed, 132 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> create mode 100644 arch/arm/mach-mvebu/pmsu-98dx3236.c
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
[not found] <20161222041328.3303-1-chris.packham@alliedtelesis.co.nz>
2016-12-22 4:13 ` [PATCH 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2016-12-22 4:13 ` [PATCH 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
@ 2016-12-22 4:13 ` Chris Packham
2016-12-22 22:48 ` Rob Herring
2016-12-30 9:03 ` Linus Walleij
2016-12-22 4:13 ` [PATCH 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2016-12-22 4:13 ` [PATCH 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
4 siblings, 2 replies; 10+ messages in thread
From: Chris Packham @ 2016-12-22 4:13 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Kalyan Kinthada, Chris Packham, Linus Walleij, Rob Herring,
Mark Rutland, Laxman Dewangan, Thomas Petazzoni, linux-gpio,
devicetree, linux-kernel
From: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs
from Marvell.
Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
.../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 +++++++
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 145 +++++++++++++++++++++
2 files changed, 191 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
new file mode 100644
index 000000000000..34c1e380adaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell 98dx3236 pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage
+
+Required properties:
+- compatible: "marvell,98dx3236-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all 98dx3236, 98dx3336 and 98dx4251 variants
+
+name pins functions
+================================================================================
+mpp0 0 gpio, spi0(mosi), dev(ad8)
+mpp1 1 gpio, spi0(miso), dev(ad9)
+mpp2 2 gpio, spi0(sck), dev(ad10)
+mpp3 3 gpio, spi0(cs0), dev(ad11)
+mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
+mpp5 5 gpio, pex(rsto), dev(bootcs)
+mpp6 6 gpio, dev(a2)
+mpp7 7 gpio, dev(ale0)
+mpp8 8 gpio, dev(ale1)
+mpp9 9 gpio, dev(ready0)
+mpp10 10 gpio, dev(ad12)
+mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
+mpp13 13 gpio, intr(out), dev(ad15)
+mpp14 14 gpio, i2c0(sck)
+mpp15 15 gpio, i2c0(sda)
+mpp16 16 gpio, dev(oe)
+mpp17 17 gpio, dev(clk)
+mpp18 18 gpio, uart1(txd)
+mpp19 19 gpio, uart1(rxd), dev(rb)
+mpp20 20 gpio, dev(we)
+mpp21 21 gpio, dev(ad0)
+mpp22 22 gpio, dev(ad1)
+mpp23 23 gpio, dev(ad2)
+mpp24 24 gpio, dev(ad3)
+mpp25 25 gpio, dev(ad4)
+mpp26 26 gpio, dev(ad5)
+mpp27 27 gpio, dev(ad6)
+mpp28 28 gpio, dev(ad7)
+mpp29 29 gpio, dev(a0)
+mpp30 30 gpio, dev(a1)
+mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
+mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
index e4ea71a9d985..2586903c59f0 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
@@ -49,6 +49,10 @@ enum armada_xp_variant {
V_MV78460 = BIT(2),
V_MV78230_PLUS = (V_MV78230 | V_MV78260 | V_MV78460),
V_MV78260_PLUS = (V_MV78260 | V_MV78460),
+ V_98DX3236 = BIT(3),
+ V_98DX3336 = BIT(4),
+ V_98DX4251 = BIT(5),
+ V_98DX3236_PLUS = (V_98DX3236 | V_98DX3336 | V_98DX4251),
};
static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
@@ -360,6 +364,124 @@ static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
MPP_VAR_FUNCTION(0x1, "dev", "ad31", V_MV78260_PLUS)),
};
+static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "mosi", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad8", V_98DX3236_PLUS)),
+ MPP_MODE(1,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
+ MPP_MODE(2,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
+ MPP_MODE(3,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "cs0", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad11", V_98DX3236_PLUS)),
+ MPP_MODE(4,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "cs1", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "cs0", V_98DX3236_PLUS)),
+ MPP_MODE(5,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
+ MPP_MODE(6,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "a2", V_98DX3236_PLUS)),
+ MPP_MODE(7,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ale0", V_98DX3236_PLUS)),
+ MPP_MODE(8,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ale1", V_98DX3236_PLUS)),
+ MPP_MODE(9,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ready0", V_98DX3236_PLUS)),
+ MPP_MODE(10,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad12", V_98DX3236_PLUS)),
+ MPP_MODE(11,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "rxd", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart0", "cts", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad13", V_98DX3236_PLUS)),
+ MPP_MODE(12,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "txd", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart0", "rts", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad14", V_98DX3236_PLUS)),
+ MPP_MODE(13,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "intr", "out", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad15", V_98DX3236_PLUS)),
+ MPP_MODE(14,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "i2c0", "sck", V_98DX3236_PLUS)),
+ MPP_MODE(15,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "i2c0", "sda", V_98DX3236_PLUS)),
+ MPP_MODE(16,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "oe", V_98DX3236_PLUS)),
+ MPP_MODE(17,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "clkout", V_98DX3236_PLUS)),
+ MPP_MODE(18,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
+ MPP_MODE(19,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
+ MPP_MODE(20,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
+ MPP_MODE(21,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad0", V_98DX3236_PLUS)),
+ MPP_MODE(22,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad1", V_98DX3236_PLUS)),
+ MPP_MODE(23,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad2", V_98DX3236_PLUS)),
+ MPP_MODE(24,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad3", V_98DX3236_PLUS)),
+ MPP_MODE(25,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad4", V_98DX3236_PLUS)),
+ MPP_MODE(26,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad5", V_98DX3236_PLUS)),
+ MPP_MODE(27,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad6", V_98DX3236_PLUS)),
+ MPP_MODE(28,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad7", V_98DX3236_PLUS)),
+ MPP_MODE(29,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "a0", V_98DX3236_PLUS)),
+ MPP_MODE(30,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "a1", V_98DX3236_PLUS)),
+ MPP_MODE(31,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "slv_smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "we1", V_98DX3236_PLUS)),
+ MPP_MODE(32,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "slv_smi", "mdio", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdio", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "cs1", V_98DX3236_PLUS)),
+};
+
static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info;
static const struct of_device_id armada_xp_pinctrl_of_match[] = {
@@ -375,6 +497,10 @@ static const struct of_device_id armada_xp_pinctrl_of_match[] = {
.compatible = "marvell,mv78460-pinctrl",
.data = (void *) V_MV78460,
},
+ {
+ .compatible = "marvell,98dx3236-pinctrl",
+ .data = (void *) V_98DX3236,
+ },
{ },
};
@@ -407,6 +533,14 @@ static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = {
MPP_GPIO_RANGE(2, 64, 64, 3),
};
+static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+};
+
static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
pm_message_t state)
{
@@ -488,6 +622,17 @@ static int armada_xp_pinctrl_probe(struct platform_device *pdev)
soc->gpioranges = mv78460_mpp_gpio_ranges;
soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges);
break;
+ case V_98DX3236:
+ case V_98DX3336:
+ case V_98DX4251:
+ /* fall-through */
+ soc->controls = mv98dx3236_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv98dx3236_mpp_controls);
+ soc->modes = mv98dx3236_mpp_modes;
+ soc->nmodes = mv98dx3236_mpp_controls[0].npins;
+ soc->gpioranges = mv98dx3236_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv98dx3236_mpp_gpio_ranges);
+ break;
}
nregs = DIV_ROUND_UP(soc->nmodes, MVEBU_MPPS_PER_REG);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
2016-12-22 4:13 ` [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
@ 2016-12-22 22:48 ` Rob Herring
2016-12-30 9:03 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2016-12-22 22:48 UTC (permalink / raw)
To: Chris Packham
Cc: linux-arm-kernel, Kalyan Kinthada, Linus Walleij, Mark Rutland,
Laxman Dewangan, Thomas Petazzoni, linux-gpio, devicetree,
linux-kernel
On Thu, Dec 22, 2016 at 05:13:26PM +1300, Chris Packham wrote:
> From: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
>
> This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs
> from Marvell.
>
> Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 +++++++
Acked-by: Rob Herring <robh@kernel.org>
> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 145 +++++++++++++++++++++
> 2 files changed, 191 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
2016-12-22 4:13 ` [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2016-12-22 22:48 ` Rob Herring
@ 2016-12-30 9:03 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Linus Walleij @ 2016-12-30 9:03 UTC (permalink / raw)
To: Chris Packham, Sebastian Hesselbarth, Thomas Petazzoni
Cc: linux-arm-kernel, Kalyan Kinthada, Rob Herring, Mark Rutland,
Laxman Dewangan, linux-gpio, devicetree, linux-kernel
On Thu, Dec 22, 2016 at 5:13 AM, Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
> From: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
>
> This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs
> from Marvell.
>
> Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Looks good to me, Sebastian and/or Thomas P can you ACK this patch?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs
[not found] <20161222041328.3303-1-chris.packham@alliedtelesis.co.nz>
` (2 preceding siblings ...)
2016-12-22 4:13 ` [PATCH 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
@ 2016-12-22 4:13 ` Chris Packham
2016-12-22 22:53 ` Rob Herring
2016-12-22 4:13 ` [PATCH 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
4 siblings, 1 reply; 10+ messages in thread
From: Chris Packham @ 2016-12-22 4:13 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Chris Packham, Rob Herring, Mark Rutland, Jason Cooper,
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth,
Russell King, devicetree, linux-kernel
The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
with integrated CPUs. They are similar to the Armada XP SoCs but have
different I/O interfaces.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
.../devicetree/bindings/arm/marvell/98dx3236.txt | 10 +
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 231 +++++++++++++++++++++
arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 78 +++++++
arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 78 +++++++
4 files changed, 397 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
new file mode 100644
index 000000000000..e7dc9b2dd90b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
@@ -0,0 +1,10 @@
+Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
+----------------------------------------------------------------------
+
+Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
+shall have the following property:
+
+Required root node property:
+
+compatible: one of "marvell,armadaxp-98dx3236", "marvell,armadaxp-98dx3336"
+ or "marvell,armadaxp-98dx4251"
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000000..bac53f8b44af
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+ model = "Marvell 98DX3236 SoC";
+ compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,98dx3236-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ /*
+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
+ */
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+ };
+
+ internal-regs {
+ coreclk: mvebu-sar@18230 {
+ compatible = "marvell,mv98dx3236-core-clock";
+ };
+
+ cpuclk: clock-complex@18700 {
+ compatible = "marvell,mv98dx3236-cpu-clock";
+ };
+
+ corediv-clock@18740 {
+ compatible = "marvell,mv98dx3236-corediv-clock";
+ reg = <0xf8268 0xc>;
+ base = <&dfx>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+
+ xor@60900 {
+ status = "disabled";
+ };
+
+ xor@f0900 {
+ status = "disabled";
+ };
+
+ xor@f0800 {
+ compatible = "marvell,orion-xor";
+ reg = <0xf0800 0x100
+ 0xf0a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ gpio0: gpio@18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
+ };
+
+ /* does not exist */
+ gpio1: gpio@18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@18180 { /* rework some properties */
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <1>; /* only gpio #32 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>;
+ };
+ };
+
+ dfx-registers {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ dfx: dfx@0 {
+ compatible = "simple-bus";
+ reg = <0 0x100000>;
+ };
+ };
+
+ switch {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+ packet-processor@0 {
+ compatible = "marvell,prestera-98dx3236";
+ reg = <0 0x4000000>;
+ interrupts = <33>, <34>, <35>;
+ dfx = <&dfx>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ compatible = "marvell,98dx3236-pinctrl";
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1",
+ "mpp2", "mpp3";
+ marvell,function = "spi0";
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000000..9c9aa565fd82
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3336 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX3336 SoC";
+ compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume@20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+
+ switch {
+ packet-processor@0 {
+ compatible = "marvell,prestera-98dx3336";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000000..5d1da8513fae
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX4251 SoC";
+ compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume@20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+
+ switch {
+ packet-processor@0 {
+ compatible = "marvell,prestera-98dx4521";
+ };
+ };
+ };
+};
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs
2016-12-22 4:13 ` [PATCH 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
@ 2016-12-22 22:53 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2016-12-22 22:53 UTC (permalink / raw)
To: Chris Packham
Cc: linux-arm-kernel, Mark Rutland, Jason Cooper, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Russell King, devicetree,
linux-kernel
On Thu, Dec 22, 2016 at 05:13:27PM +1300, Chris Packham wrote:
> The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
> with integrated CPUs. They are similar to the Armada XP SoCs but have
> different I/O interfaces.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> .../devicetree/bindings/arm/marvell/98dx3236.txt | 10 +
> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 231 +++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 78 +++++++
> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 78 +++++++
> 4 files changed, 397 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> new file mode 100644
> index 000000000000..e7dc9b2dd90b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> @@ -0,0 +1,10 @@
> +Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
> +----------------------------------------------------------------------
> +
> +Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
> +shall have the following property:
> +
> +Required root node property:
> +
> +compatible: one of "marvell,armadaxp-98dx3236", "marvell,armadaxp-98dx3336"
> + or "marvell,armadaxp-98dx4251"
The 3336 and 4251 are compatible with 3236 according to the dts files.
That needs to be expressed here.
Rob
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
[not found] <20161222041328.3303-1-chris.packham@alliedtelesis.co.nz>
` (3 preceding siblings ...)
2016-12-22 4:13 ` [PATCH 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
@ 2016-12-22 4:13 ` Chris Packham
4 siblings, 0 replies; 10+ messages in thread
From: Chris Packham @ 2016-12-22 4:13 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Chris Packham, Rob Herring, Mark Rutland, Russell King,
devicetree, linux-kernel
These boards are Marvell's evaluation boards for the 98DX4251 and
98DX3336 SoCs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
arch/arm/boot/dts/db-dxbc2.dts | 159 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/db-xc3-24g4xg.dts | 155 +++++++++++++++++++++++++++++++++++
2 files changed, 314 insertions(+)
create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
new file mode 100644
index 000000000000..f56786cea5f8
--- /dev/null
+++ b/arch/arm/boot/dts/db-dxbc2.dts
@@ -0,0 +1,159 @@
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+ model = "Marvell Bobcat2 Evaluation Board";
+ compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+ };
+
+ internal-regs {
+ serial@12000 {
+ status = "okay";
+ };
+ serial@12100 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ clock-frequency = <100000>;
+ status = "okay";
+ };
+
+ mvsdio@d4000 {
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition@unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
new file mode 100644
index 000000000000..5eb89ffb9a7d
--- /dev/null
+++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+ model = "DB-XC3-24G4XG";
+ compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+ };
+
+ internal-regs {
+ serial@12000 {
+ status = "okay";
+ };
+ serial@12100 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ clock-frequency = <100000>;
+ status = "okay";
+ };
+
+ mvsdio@d4000 {
+ status = "disabled";
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition@u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition@unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 10+ messages in thread