[PATCH net 0/2] r8152: fix autosuspend issue

[PATCH net 0/2] r8152: fix autosuspend issue

[Hayes Wang]

Avoid rx is split into two parts when runtime suspend occurs.

Hayes Wang (2):
  r8152: split rtl8152_suspend function
  r8152: fix rx issue for runtime suspend

 drivers/net/usb/r8152.c | 80 +++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 64 insertions(+), 16 deletions(-)

-- 
2.7.4

[PATCH net 1/2] r8152: split rtl8152_suspend function

[Hayes Wang]

Split rtl8152_suspend() into rtl8152_system_suspend() and
rtl8152_rumtime_suspend().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 57 ++++++++++++++++++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 17 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 7dc6122..c5e6d88 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3576,39 +3576,62 @@ static bool delay_autosuspend(struct r8152 *tp)
 		return false;
 }
 
-static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+static int rtl8152_rumtime_suspend(struct r8152 *tp)
 {
-	struct r8152 *tp = usb_get_intfdata(intf);
 	struct net_device *netdev = tp->netdev;
 	int ret = 0;
 
-	mutex_lock(&tp->control);
-
-	if (PMSG_IS_AUTO(message)) {
-		if (netif_running(netdev) && delay_autosuspend(tp)) {
+	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
+		if (delay_autosuspend(tp)) {
 			ret = -EBUSY;
 			goto out1;
 		}
 
-		set_bit(SELECTIVE_SUSPEND, &tp->flags);
-	} else {
-		netif_device_detach(netdev);
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+		napi_disable(&tp->napi);
+		rtl_stop_rx(tp);
+		tp->rtl_ops.autosuspend_en(tp, true);
+		napi_enable(&tp->napi);
 	}
 
+	set_bit(SELECTIVE_SUSPEND, &tp->flags);
+
+out1:
+	return ret;
+}
+
+static int rtl8152_system_suspend(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	int ret = 0;
+
+	netif_device_detach(netdev);
+
 	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
 		clear_bit(WORK_ENABLE, &tp->flags);
 		usb_kill_urb(tp->intr_urb);
 		napi_disable(&tp->napi);
-		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
-			rtl_stop_rx(tp);
-			tp->rtl_ops.autosuspend_en(tp, true);
-		} else {
-			cancel_delayed_work_sync(&tp->schedule);
-			tp->rtl_ops.down(tp);
-		}
+		cancel_delayed_work_sync(&tp->schedule);
+		tp->rtl_ops.down(tp);
 		napi_enable(&tp->napi);
 	}
-out1:
+
+	return ret;
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	int ret;
+
+	mutex_lock(&tp->control);
+
+	if (PMSG_IS_AUTO(message))
+		ret = rtl8152_rumtime_suspend(tp);
+	else
+		ret = rtl8152_system_suspend(tp);
+
 	mutex_unlock(&tp->control);
 
 	return ret;
-- 
2.7.4

[PATCH net 2/2] r8152: fix rx issue for runtime suspend

[Hayes Wang]

Pause the rx and make sure the rx fifo is empty when the autosuspend
occurs.

If the rx data comes when the driver is canceling the rx urb, the host
controller would stop getting the data from the device and continue
it after next rx urb is submitted. That is, one continuing data is
split into two different urb buffers. That let the driver take the
data as a rx descriptor, and unexpected behavior happens.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c5e6d88..be41856 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3582,17 +3582,42 @@ static int rtl8152_rumtime_suspend(struct r8152 *tp)
 	int ret = 0;
 
 	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
+		u32 rcr = 0;
+
 		if (delay_autosuspend(tp)) {
 			ret = -EBUSY;
 			goto out1;
 		}
 
+		if (netif_carrier_ok(netdev)) {
+			u32 ocp_data;
+
+			rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+			ocp_data = rcr & ~RCR_ACPT_ALL;
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+			rxdy_gated_en(tp, true);
+			ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA,
+						 PLA_OOB_CTRL);
+			if (!(ocp_data & RXFIFO_EMPTY)) {
+				rxdy_gated_en(tp, false);
+				ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+				ret = -EBUSY;
+				goto out1;
+			}
+		}
+
 		clear_bit(WORK_ENABLE, &tp->flags);
 		usb_kill_urb(tp->intr_urb);
-		napi_disable(&tp->napi);
-		rtl_stop_rx(tp);
+
 		tp->rtl_ops.autosuspend_en(tp, true);
-		napi_enable(&tp->napi);
+
+		if (netif_carrier_ok(netdev)) {
+			napi_disable(&tp->napi);
+			rtl_stop_rx(tp);
+			rxdy_gated_en(tp, false);
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+			napi_enable(&tp->napi);
+		}
 	}
 
 	set_bit(SELECTIVE_SUSPEND, &tp->flags);
-- 
2.7.4

Re: [PATCH net 0/2] r8152: fix autosuspend issue

[David Miller]

From: Hayes Wang <hayeswang@realtek.com>
Date: Tue, 10 Jan 2017 17:04:05 +0800

> Avoid rx is split into two parts when runtime suspend occurs.

Series applied and queued up for -stable.