[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v3)

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v3)

[Eric Anholt]

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
v2: Michael's patch that #included from ../../../arm64/... in a new
    bcm2837-rpi-3-b.dts.
v3: Mine, using symlinks to make sure that we don't break the split DT
    tree.

 arch/arm/boot/dts/Makefile            | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 +
 arch/arm/boot/dts/bcm2837.dtsi        | 1 +
 3 files changed, 3 insertions(+)
 create mode 120000 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
 create mode 120000 arch/arm/boot/dts/bcm2837.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6576e3f000c9..416fdcedf5a1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-b.dtb \
 	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
new file mode 120000
index 000000000000..ceebc0e163fb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1 @@
+../../../arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
new file mode 120000
index 000000000000..53f1cd2bba47
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -0,0 +1 @@
+../../../arm64/boot/dts/broadcom/bcm2837.dtsi
\ No newline at end of file
-- 
2.11.0