* [PATCH linux v3 0/1] Devicetree binding for ASPEED PWM/Fan Tach
@ 2017-02-14 6:19 Jaghathiswari Rankappagounder Natarajan
2017-02-14 6:19 ` [PATCH linux v3 1/1] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver Jaghathiswari Rankappagounder Natarajan
0 siblings, 1 reply; 3+ messages in thread
From: Jaghathiswari Rankappagounder Natarajan @ 2017-02-14 6:19 UTC (permalink / raw)
To: joel, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Jaghathiswari Rankappagounder Natarajan
I received comments regarding devicetree documentation for
ASPEED AST2400/AST2500 PWM/Fan Tach controller driver.
I have addressed the comments in this patch. I want to work towards a common
devicetree structure and then proceed with implementation of the
corresponding hwmon driver.
Jaghathiswari Rankappagounder Natarajan (1):
Documentation: dt-bindings: Document bindings for ASPEED
AST2400/AST2500 PWM and Fan tach controller device driver
.../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
--
2.11.0.483.g087da7b7c-goog
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH linux v3 1/1] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
2017-02-14 6:19 [PATCH linux v3 0/1] Devicetree binding for ASPEED PWM/Fan Tach Jaghathiswari Rankappagounder Natarajan
@ 2017-02-14 6:19 ` Jaghathiswari Rankappagounder Natarajan
2017-03-02 15:07 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Jaghathiswari Rankappagounder Natarajan @ 2017-02-14 6:19 UTC (permalink / raw)
To: joel, robh+dt, mark.rutland, devicetree, linux-kernel
Cc: Jaghathiswari Rankappagounder Natarajan
This binding provides interface for adding values related to ASPEED
AST2400/2500 PWM and Fan tach controller support.
The PWM controller can support upto 8 PWM output ports.
The Fan tach controller can support upto 16 tachometer inputs.
Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
---
v3:
Made the structure more common
.../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 73 ++++++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
new file mode 100644
index 000000000000..c2de3709e554
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -0,0 +1,73 @@
+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,aspeed2400-pwm-tacho" for AST2400 or
+ "aspeed,aspeed2500-pwm-tacho" for AST2500.
+
+- clocks : a fixed clock providing input clock frequency(PWM
+ and Fan Tach clock)
+
+fan subnode format:
+========================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+
+Required properties for each child node(starting from PWM A through PWM H):
+- pwm-port : should specify PWM source port.
+ integer value in the range 0 to 7 with 0 indicating PWM port
+ A and 7 indicating PWM port H.
+
+- fan-ctrl-gpios : should specify the tachometer input GPIO pin on the hardware.
+ Fan Tachometer function can only work when GPIO is in
+ ”input mode”.
+
+- fan-tach-ch : should specify the Fan tach input channel.
+ integer value in the range 0 through 15, with 0 indicating
+ Fan tach channel 0 and 15 indicating Fan tach channel 15.
+
+Examples:
+
+pwm-tacho-fixed-clk: fixedclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+}
+
+pwm-tacho: pwm-tacho-controller@1e786000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1E786000 0x1000>;
+ compatible = "aspeed,aspeed2500-pwm-tacho";
+ clocks = <&pwm-tacho-fixed-clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan0 {
+ pwm-port = /bits/ 8 <0x00>;
+ fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_HIGH>;
+ fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan1 {
+ pwm-port = /bits/ 8 <0x01>;
+ fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 1) GPIO_ACTIVE_HIGH>;
+ fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
--
2.11.0.483.g087da7b7c-goog
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH linux v3 1/1] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
2017-02-14 6:19 ` [PATCH linux v3 1/1] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver Jaghathiswari Rankappagounder Natarajan
@ 2017-03-02 15:07 ` Rob Herring
0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2017-03-02 15:07 UTC (permalink / raw)
To: Jaghathiswari Rankappagounder Natarajan
Cc: joel, mark.rutland, devicetree, linux-kernel
On Mon, Feb 13, 2017 at 10:19:35PM -0800, Jaghathiswari Rankappagounder Natarajan wrote:
> This binding provides interface for adding values related to ASPEED
> AST2400/2500 PWM and Fan tach controller support.
> The PWM controller can support upto 8 PWM output ports.
> The Fan tach controller can support upto 16 tachometer inputs.
>
> Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
> ---
> v3:
> Made the structure more common
>
> .../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 73 ++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
> new file mode 100644
> index 000000000000..c2de3709e554
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
> @@ -0,0 +1,73 @@
> +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
> +
> +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
> +controller can support upto 16 Fan tachometer inputs.
> +
> +There can be upto 8 fans supported. Each fan can have one PWM output and
> +one/two Fan tach inputs.
> +
> +Required properties for pwm-tacho node:
> +- #address-cells : should be 1.
> +
> +- #size-cells : should be 1.
> +
> +- reg : address and length of the register set for the device.
> +
> +- pinctrl-names : a pinctrl state named "default" must be defined.
> +
> +- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
> +
> +- compatible : should be "aspeed,aspeed2400-pwm-tacho" for AST2400 or
> + "aspeed,aspeed2500-pwm-tacho" for AST2500.
> +
> +- clocks : a fixed clock providing input clock frequency(PWM
> + and Fan Tach clock)
> +
> +fan subnode format:
> +========================
> +Under fan subnode there can upto 8 child nodes, with each child node
> +representing a fan. If there are 8 fans each fan can have one PWM port and
> +one/two Fan tach inputs.
> +
> +Required properties for each child node(starting from PWM A through PWM H):
> +- pwm-port : should specify PWM source port.
> + integer value in the range 0 to 7 with 0 indicating PWM port
> + A and 7 indicating PWM port H.
> +
> +- fan-ctrl-gpios : should specify the tachometer input GPIO pin on the hardware.
> + Fan Tachometer function can only work when GPIO is in
> + ”input mode”.
This still sounds like pin muxing, not actual GPIO usage.
> +
> +- fan-tach-ch : should specify the Fan tach input channel.
> + integer value in the range 0 through 15, with 0 indicating
> + Fan tach channel 0 and 15 indicating Fan tach channel 15.
> +
> +Examples:
> +
> +pwm-tacho-fixed-clk: fixedclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> +}
> +
> +pwm-tacho: pwm-tacho-controller@1e786000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x1E786000 0x1000>;
> + compatible = "aspeed,aspeed2500-pwm-tacho";
> + clocks = <&pwm-tacho-fixed-clk>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
> +
> + fan0 {
> + pwm-port = /bits/ 8 <0x00>;
Since fans and pwms are 1-1, I'd just use reg here.
I still think this should probably use PWM binding, but given this is
all self contained it is okay.
> + fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_HIGH>;
> + fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan1 {
> + pwm-port = /bits/ 8 <0x01>;
> + fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 1) GPIO_ACTIVE_HIGH>;
> + fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +};
> --
> 2.11.0.483.g087da7b7c-goog
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-03-02 15:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-14 6:19 [PATCH linux v3 0/1] Devicetree binding for ASPEED PWM/Fan Tach Jaghathiswari Rankappagounder Natarajan
2017-02-14 6:19 ` [PATCH linux v3 1/1] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver Jaghathiswari Rankappagounder Natarajan
2017-03-02 15:07 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).