linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
	Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC
Date: Thu,  4 May 2017 19:48:56 +0800	[thread overview]
Message-ID: <20170504114858.9008-12-icenowy@aosc.io> (raw)
In-Reply-To: <20170504114858.9008-1-icenowy@aosc.io>

Allwinner V3s SoC features a "Display Engine 2.0" with only one TCON
which have RGB LCD output.

Add device nodes for it as well as the TCON.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 71075969e5e6..0a895179d8ae 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -41,6 +41,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
 	#address-cells = <1>;
@@ -59,6 +63,12 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&de2_mixer0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -93,6 +103,83 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2_clocks: clock@1000000 {
+			compatible = "allwinner,sun50i-h5-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		de2_mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&de2_clocks CLK_MIXER0>,
+				 <&de2_clocks CLK_BUS_MIXER0>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&de2_clocks RST_MIXER0>;
+			assigned-clocks = <&de2_clocks CLK_MIXER0>;
+			assigned-clock-rates = <150000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-- 
2.12.2

  parent reply	other threads:[~2017-05-04 11:51 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-04 11:48 [PATCH v6 00/13] Initial Allwinner Display Engine 2.0 Support Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 01/13] dt-bindings: add binding for the Allwinner DE2 CCU Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 02/13] clk: sunxi-ng: add support for " Icenowy Zheng
2017-05-04 12:50   ` Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 03/13] dt-bindings: add bindings for DE2 on V3s SoC Icenowy Zheng
2017-05-05  3:24   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 04/13] drm/sun4i: return only planes for layers created Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 05/13] drm/sun4i: abstract a engine type Icenowy Zheng
2017-05-05  2:56   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05  8:36     ` icenowy
2017-05-05  8:38       ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 06/13] drm/sun4i: add a dedicated module for sun4i-backend and sun4i-layer Icenowy Zheng
2017-05-05  3:10   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 07/13] drm/sun4i: add a Kconfig option for sun4i-backend Icenowy Zheng
2017-05-05  3:14   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 08/13] drm/sun4i: add support for Allwinner DE2 mixers Icenowy Zheng
2017-05-04 13:05   ` Maxime Ripard
2017-05-04 16:50     ` icenowy
2017-05-04 16:57       ` icenowy
2017-05-04 17:14         ` icenowy
2017-05-05 12:36       ` Maxime Ripard
2017-05-05 12:39         ` Icenowy Zheng
2017-05-09 20:19           ` Maxime Ripard
2017-05-04 16:52     ` icenowy
2017-05-05  3:40       ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 09/13] drm/sun4i: Add compatible string for V3s display engine Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 10/13] drm/sun4i: tcon: add support for V3s TCON Icenowy Zheng
2017-05-05  3:33   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` Icenowy Zheng [this message]
2017-05-05  3:31   ` [linux-sunxi] [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC Chen-Yu Tsai
2017-05-05  8:53     ` icenowy
2017-05-05 12:30       ` Maxime Ripard
2017-05-05 12:34         ` Icenowy Zheng
2017-05-09 19:26           ` Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 12/13] ARM: dts: sun8i: add pinmux for LCD pins of " Icenowy Zheng
2017-05-05  3:25   ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 13/13] [DO NOT MERGE] ARM: dts: sun8i: enable LCD panel of Lichee Pi Zero Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170504114858.9008-12-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).