From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v6 02/13] clk: sunxi-ng: add support for DE2 CCU
Date: Thu, 4 May 2017 19:48:47 +0800 [thread overview]
Message-ID: <20170504114858.9008-3-icenowy@aosc.io> (raw)
In-Reply-To: <20170504114858.9008-1-icenowy@aosc.io>
The "Display Engine 2.0" in Allwinner newer SoCs contains a clock
management unit for its subunits, like the DE CCU in A80.
Add a sunxi-ng style driver for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v5:
- Removed dt-bindings headers (they're now in patch 1).
Changes in v4:
- Fixed the inconsistence between mixer_div clocks' number and real clock.
Changes in v2:
- Rename sunxi-de2-ccu to sun8i-de2-ccu.
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 218 +++++++++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-de2.h | 28 +++++
4 files changed, 252 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-de2.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 64088e599404..2e4d804fbf61 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -140,6 +140,11 @@ config SUN8I_V3S_CCU
default MACH_SUN8I
depends on MACH_SUN8I || COMPILE_TEST
+config SUN8I_DE2_CCU
+ bool "Support for the Allwinner SoCs DE2 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_GATE
+
config SUN9I_A80_CCU
bool "Support for the Allwinner A80 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0ec02fe14c50..be616279450e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN8I_DE2_CCU) += ccu-sun8i-de2.o
obj-$(CONFIG_SUN8I_R_CCU) += ccu-sun8i-r.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
new file mode 100644
index 000000000000..adb2c344692a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun8i-de2.h"
+
+static SUNXI_CCU_GATE(bus_mixer0_clk, "bus-mixer0", "bus-de",
+ 0x04, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1", "bus-de",
+ 0x04, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
+ 0x04, BIT(2), 0);
+
+static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
+ 0x00, BIT(0), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(mixer1_clk, "mixer1", "mixer1-div",
+ 0x00, BIT(1), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
+ 0x00, BIT(2), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de", 0x0c, 4, 4,
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
+ CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sunxi_de2_clks[] = {
+ &mixer0_clk.common,
+ &mixer1_clk.common,
+ &wb_clk.common,
+
+ &bus_mixer0_clk.common,
+ &bus_mixer1_clk.common,
+ &bus_wb_clk.common,
+
+ &mixer0_div_clk.common,
+ &mixer1_div_clk.common,
+ &wb_div_clk.common,
+};
+
+static struct clk_hw_onecell_data sunxi_de2_hw_clks = {
+ .hws = {
+ [CLK_MIXER0] = &mixer0_clk.common.hw,
+ [CLK_MIXER1] = &mixer1_clk.common.hw,
+ [CLK_WB] = &wb_clk.common.hw,
+
+ [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
+ [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
+ [CLK_BUS_WB] = &bus_wb_clk.common.hw,
+
+ [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
+ [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
+ [CLK_WB_DIV] = &wb_div_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
+ [RST_MIXER0] = { 0x08, BIT(0) },
+ /*
+ * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
+ * only RST_WB is exported here.
+ */
+ [RST_WB] = { 0x08, BIT(2) },
+};
+
+static struct ccu_reset_map sun50i_a64_de2_resets[] = {
+ [RST_MIXER0] = { 0x08, BIT(0) },
+ [RST_MIXER1] = { 0x08, BIT(1) },
+ [RST_WB] = { 0x08, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
+ .ccu_clks = sunxi_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
+
+ .hw_clks = &sunxi_de2_hw_clks,
+
+ .resets = sun8i_a83t_de2_resets,
+ .num_resets = ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
+static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
+ .ccu_clks = sunxi_de2_clks,
+ .num_ccu_clks = ARRAY_SIZE(sunxi_de2_clks),
+
+ .hw_clks = &sunxi_de2_hw_clks,
+
+ .resets = sun50i_a64_de2_resets,
+ .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
+};
+
+static int sunxi_de2_clk_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *bus_clk, *mod_clk;
+ struct reset_control *rstc;
+ void __iomem *reg;
+ const struct sunxi_ccu_desc *ccu_desc;
+ int ret;
+
+ ccu_desc = of_device_get_match_data(&pdev->dev);
+ if (!ccu_desc)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(bus_clk)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+ return ret;
+ }
+
+ mod_clk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(mod_clk)) {
+ ret = PTR_ERR(mod_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
+ return ret;
+ }
+
+ rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Couldn't get reset control: %d\n", ret);
+ return ret;
+ }
+
+ /* The clocks need to be enabled for us to access the registers */
+ ret = clk_prepare_enable(bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(mod_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable mod clk: %d\n", ret);
+ return ret;
+ }
+
+ /* The reset control needs to be asserted for the controls to work */
+ ret = reset_control_deassert(rstc);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Couldn't deassert reset control: %d\n", ret);
+ goto err_disable_clk;
+ }
+
+ ret = sunxi_ccu_probe(pdev->dev.of_node, reg, ccu_desc);
+ if (ret)
+ goto err_assert_reset;
+
+ return 0;
+
+err_assert_reset:
+ reset_control_assert(rstc);
+err_disable_clk:
+ clk_disable_unprepare(bus_clk);
+ return ret;
+}
+
+static const struct of_device_id sunxi_de2_clk_ids[] = {
+ {
+ .compatible = "allwinner,sun8i-a83t-de2-clk",
+ .data = &sun8i_a83t_de2_clk_desc,
+ },
+ {
+ .compatible = "allwinner,sun50i-h5-de2-clk",
+ .data = &sun50i_a64_de2_clk_desc,
+ },
+ /*
+ * The Allwinner A64 SoC needs some bit to be poke in syscon to make
+ * DE2 really working.
+ * So there's currently no A64 compatible here.
+ * H5 shares the same reset line with A64, so here H5 is using the
+ * clock description of A64.
+ */
+ { }
+};
+
+static struct platform_driver sunxi_de2_clk_driver = {
+ .probe = sunxi_de2_clk_probe,
+ .driver = {
+ .name = "sunxi-de2-clks",
+ .of_match_table = sunxi_de2_clk_ids,
+ },
+};
+builtin_platform_driver(sunxi_de2_clk_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
new file mode 100644
index 000000000000..530c006e0ae9
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_DE2_H_
+#define _CCU_SUN8I_DE2_H_
+
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+
+/* Intermediary clock dividers are not exported */
+#define CLK_MIXER0_DIV 3
+#define CLK_MIXER1_DIV 4
+#define CLK_WB_DIV 5
+
+#define CLK_NUMBER (CLK_WB + 1)
+
+#endif /* _CCU_SUN8I_DE2_H_ */
--
2.12.2
next prev parent reply other threads:[~2017-05-04 11:49 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-04 11:48 [PATCH v6 00/13] Initial Allwinner Display Engine 2.0 Support Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 01/13] dt-bindings: add binding for the Allwinner DE2 CCU Icenowy Zheng
2017-05-04 11:48 ` Icenowy Zheng [this message]
2017-05-04 12:50 ` [PATCH v6 02/13] clk: sunxi-ng: add support for " Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 03/13] dt-bindings: add bindings for DE2 on V3s SoC Icenowy Zheng
2017-05-05 3:24 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 04/13] drm/sun4i: return only planes for layers created Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 05/13] drm/sun4i: abstract a engine type Icenowy Zheng
2017-05-05 2:56 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05 8:36 ` icenowy
2017-05-05 8:38 ` Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 06/13] drm/sun4i: add a dedicated module for sun4i-backend and sun4i-layer Icenowy Zheng
2017-05-05 3:10 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 07/13] drm/sun4i: add a Kconfig option for sun4i-backend Icenowy Zheng
2017-05-05 3:14 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 08/13] drm/sun4i: add support for Allwinner DE2 mixers Icenowy Zheng
2017-05-04 13:05 ` Maxime Ripard
2017-05-04 16:50 ` icenowy
2017-05-04 16:57 ` icenowy
2017-05-04 17:14 ` icenowy
2017-05-05 12:36 ` Maxime Ripard
2017-05-05 12:39 ` Icenowy Zheng
2017-05-09 20:19 ` Maxime Ripard
2017-05-04 16:52 ` icenowy
2017-05-05 3:40 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 09/13] drm/sun4i: Add compatible string for V3s display engine Icenowy Zheng
2017-05-04 11:48 ` [PATCH v6 10/13] drm/sun4i: tcon: add support for V3s TCON Icenowy Zheng
2017-05-05 3:33 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 11/13] ARM: dts: sun8i: add DE2 nodes for V3s SoC Icenowy Zheng
2017-05-05 3:31 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-05 8:53 ` icenowy
2017-05-05 12:30 ` Maxime Ripard
2017-05-05 12:34 ` Icenowy Zheng
2017-05-09 19:26 ` Maxime Ripard
2017-05-04 11:48 ` [PATCH v6 12/13] ARM: dts: sun8i: add pinmux for LCD pins of " Icenowy Zheng
2017-05-05 3:25 ` [linux-sunxi] " Chen-Yu Tsai
2017-05-04 11:48 ` [PATCH v6 13/13] [DO NOT MERGE] ARM: dts: sun8i: enable LCD panel of Lichee Pi Zero Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170504114858.9008-3-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).