[PATCHv3] wlcore: add wl1285 compatible

[PATCHv3] wlcore: add wl1285 compatible

[Sebastian Reichel]

Motorola Droid 4 uses a WL1285C. With differences between the
chips not being public let's add explicit binding for wl1285
instead of relying on wl1283 being very similar.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
---
Hi Dave,

I previously send this in two patches, but its hard to apply without
requiring multiple kernel releases (the driver must be updated before
the DTS change). Since the actual change is not very complex Marcel
Holtmann & Tony Lindgren suggested, that I send this directly to you
in a single patch for inclusion into 4.12. This also means, that the
remaining series can be queued normally for 4.13.

-- Sebastian
---
 Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt | 1 +
 arch/arm/boot/dts/omap4-droid4-xt894.dts                     | 2 +-
 drivers/net/wireless/ti/wlcore/sdio.c                        | 1 +
 drivers/net/wireless/ti/wlcore/spi.c                         | 1 +
 4 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
index 2a3d90de18ee..7b2cbb14113e 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
@@ -10,6 +10,7 @@ Required properties:
     * "ti,wl1273"
     * "ti,wl1281"
     * "ti,wl1283"
+    * "ti,wl1285"
     * "ti,wl1801"
     * "ti,wl1805"
     * "ti,wl1807"
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 89eb607f4a9e..c09b51d6ccf7 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -301,7 +301,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
-		compatible = "ti,wl1283";
+		compatible = "ti,wl1285";
 		reg = <2>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 287023ef4a78..2fb38717346f 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -237,6 +237,7 @@ static const struct of_device_id wlcore_sdio_of_match_table[] = {
 	{ .compatible = "ti,wl1273", .data = &wl127x_data },
 	{ .compatible = "ti,wl1281", .data = &wl128x_data },
 	{ .compatible = "ti,wl1283", .data = &wl128x_data },
+	{ .compatible = "ti,wl1285", .data = &wl128x_data },
 	{ .compatible = "ti,wl1801", .data = &wl18xx_data },
 	{ .compatible = "ti,wl1805", .data = &wl18xx_data },
 	{ .compatible = "ti,wl1807", .data = &wl18xx_data },
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index f949ad2bd898..1f5d9ebb0925 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -433,6 +433,7 @@ static const struct of_device_id wlcore_spi_of_match_table[] = {
 	{ .compatible = "ti,wl1273", .data = &wl127x_data},
 	{ .compatible = "ti,wl1281", .data = &wl128x_data},
 	{ .compatible = "ti,wl1283", .data = &wl128x_data},
+	{ .compatible = "ti,wl1285", .data = &wl128x_data},
 	{ .compatible = "ti,wl1801", .data = &wl18xx_data},
 	{ .compatible = "ti,wl1805", .data = &wl18xx_data},
 	{ .compatible = "ti,wl1807", .data = &wl18xx_data},
-- 
2.11.0

Re: [PATCHv3] wlcore: add wl1285 compatible

[Kalle Valo]

Sebastian Reichel <sebastian.reichel@collabora.co.uk> writes:

> Motorola Droid 4 uses a WL1285C. With differences between the
> chips not being public let's add explicit binding for wl1285
> instead of relying on wl1283 being very similar.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

For the wireless part:

Acked-by: Kalle Valo <kvalo@codeaurora.org>

> Hi Dave,
>
> I previously send this in two patches, but its hard to apply without
> requiring multiple kernel releases (the driver must be updated before
> the DTS change). Since the actual change is not very complex Marcel
> Holtmann & Tony Lindgren suggested, that I send this directly to you
> in a single patch for inclusion into 4.12. This also means, that the
> remaining series can be queued normally for 4.13.

If you want Dave to take this you should CC also netdev, otherwise he
won't see it in patchwork:

https://patchwork.ozlabs.org/project/netdev/list/?order=date

-- 
Kalle Valo

Re: [PATCHv3] wlcore: add wl1285 compatible

[Tony Lindgren]

* Sebastian Reichel <sebastian.reichel@collabora.co.uk> [170505 02:47]:
> Motorola Droid 4 uses a WL1285C. With differences between the
> chips not being public let's add explicit binding for wl1285
> instead of relying on wl1283 being very similar.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
> ---
> Hi Dave,
> 
> I previously send this in two patches, but its hard to apply without
> requiring multiple kernel releases (the driver must be updated before
> the DTS change). Since the actual change is not very complex Marcel
> Holtmann & Tony Lindgren suggested, that I send this directly to you
> in a single patch for inclusion into 4.12. This also means, that the
> remaining series can be queued normally for 4.13.

Acke-by: Tony Lindgren <tony@atomide.com>