[PATCH v4 1/2] Documentation: tpm: add powered-while-suspended binding documentation

[PATCH v4 1/2] Documentation: tpm: add powered-while-suspended binding documentation

[Enric Balletbo i Serra]

Add a new powered-while-suspended property to control the behavior of the
TPM suspend/resume.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v3.
  - Rebased on top of linux-next
 Rob Herring
  - Split DT binding from code patch as is preferred. 

Did not exist on previous versions.

 Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
index 8cb638b..85c8216 100644
--- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
+++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
@@ -8,6 +8,12 @@ Required properties:
                    the firmware event log
 - linux,sml-size : size of the memory allocated for the firmware event log
 
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+                           suspend and resume (makes the suspend/resume
+                           callbacks do nothing).
+
 Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
 ----------------------------------------------------------
 
-- 
2.9.3

[PATCH v4 2/2] tpm: do not suspend/resume if power stays on

[Enric Balletbo i Serra]

The suspend/resume behavior of the TPM can be controlled by setting
"powered-while-suspended" in the DTS. This is useful for the cases
when hardware does not power-off the TPM.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
Changes since v3.
  - Rebased on top of linux-next
 Rob Herring
  - Split DT binding from code patch as is preferred.
Changes since v2:
 Jarkko Sakkinen
  - Add a new TPM_CHIP_FLAG_ALWAYS_POWERED flag instead of using a boolean variable.
  - Remove a trailing newline.
Changes since v1:
 Jason Gunthorpe :
  - Move the code to handle suspend/resume in the common chip code.

 drivers/char/tpm/tpm-interface.c | 3 +++
 drivers/char/tpm/tpm.h           | 1 +
 drivers/char/tpm/tpm_of.c        | 3 +++
 3 files changed, 7 insertions(+)

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index be54159..34ec7ce 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -1099,6 +1099,9 @@ int tpm_pm_suspend(struct device *dev)
 	if (chip == NULL)
 		return -ENODEV;
 
+	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
+		return 0;
+
 	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
 		tpm2_shutdown(chip, TPM2_SU_STATE);
 		return 0;
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index af05c14..b44d39c 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -170,6 +170,7 @@ enum tpm_chip_flags {
 	TPM_CHIP_FLAG_IRQ		= BIT(2),
 	TPM_CHIP_FLAG_VIRTUAL		= BIT(3),
 	TPM_CHIP_FLAG_HAVE_TIMEOUTS	= BIT(4),
+	TPM_CHIP_FLAG_ALWAYS_POWERED	= BIT(5),
 };
 
 struct tpm_bios_log {
diff --git a/drivers/char/tpm/tpm_of.c b/drivers/char/tpm/tpm_of.c
index de57d4a..aadb7f4 100644
--- a/drivers/char/tpm/tpm_of.c
+++ b/drivers/char/tpm/tpm_of.c
@@ -36,6 +36,9 @@ int tpm_read_log_of(struct tpm_chip *chip)
 	else
 		return -ENODEV;
 
+	if (of_property_read_bool(np, "powered-while-suspended"))
+		chip->flags |= TPM_CHIP_FLAG_ALWAYS_POWERED;
+
 	sizep = of_get_property(np, "linux,sml-size", NULL);
 	basep = of_get_property(np, "linux,sml-base", NULL);
 	if (sizep == NULL && basep == NULL)
-- 
2.9.3