[PATCH 3.18 00/33] 3.18.56-stable review

[PATCH 3.18 00/33] 3.18.56-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.56 release.
There are 33 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Jun  7 15:30:04 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.56-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.56-rc1

Eric Sandeen <sandeen@sandeen.net>
    xfs: fix unaligned access in xfs_btree_visit_blocks

Zorro Lang <zlang@redhat.com>
    xfs: bad assertion for delalloc an extent that start at i_size

Brian Foster <bfoster@redhat.com>
    xfs: fix indlen accounting error on partial delalloc conversion

Brian Foster <bfoster@redhat.com>
    xfs: fix up quotacheck buffer list error handling

Brian Foster <bfoster@redhat.com>
    xfs: prevent multi-fsb dir readahead from reading random blocks

Eric Sandeen <sandeen@redhat.com>
    xfs: handle array index overrun in xfs_dir2_leaf_readbuf()

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: fix over-copying of getbmap parameters from userspace

Eryu Guan <eguan@redhat.com>
    xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()

Jan Kara <jack@suse.cz>
    xfs: Fix missed holes in SEEK_HOLE implementation

Yisheng Xie <xieyisheng1@huawei.com>
    mlock: fix mlock count can not decrease in race condition

Punit Agrawal <punit.agrawal@arm.com>
    mm/migrate: fix refcount handling when !hugepage_migration_supported()

Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
    drm/gma500/psb: Actually use VBT mode when it is found

Thomas Gleixner <tglx@linutronix.de>
    slub/memcg: cure the brainless abuse of sysfs attributes

Alexander Tsoy <alexander@tsoy.me>
    ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430

Nicolas Iooss <nicolas.iooss_linux@m4x.org>
    pcmcia: remove left-over %Z format

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/ci: disable mclk switching for high refresh rates (v2)

Sebastian Reichel <sebastian.reichel@collabora.co.uk>
    i2c: i2c-tiny-usb: fix buffer not being DMA capable

Davide Caratti <dcaratti@redhat.com>
    sctp: fix ICMP processing if skb is non-linear

Wei Wang <weiwan@google.com>
    tcp: avoid fastopen API to be used on AF_UNSPEC

Eric Dumazet <edumazet@google.com>
    ipv6: fix out of bound writes in __ip6_append_data()

Bjørn Mork <bjorn@mork.no>
    qmi_wwan: add another Lenovo EM74xx device ID

David S. Miller <davem@davemloft.net>
    ipv6: Check ip6_find_1stfragopt() return value properly.

Craig Gallek <kraig@google.com>
    ipv6: Prevent overrun when parsing v6 header options

Soheil Hassas Yeganeh <soheil@google.com>
    tcp: eliminate negative reordering in tcp_clean_rtx_queue

Eric Dumazet <edumazet@google.com>
    sctp: do not inherit ipv6_{mc|ac|fl}_list from parent

Xin Long <lucien.xin@gmail.com>
    sctp: fix src address selection if using secondary addresses for ipv6

Yuchung Cheng <ycheng@google.com>
    tcp: avoid fragmenting peculiar skbs in SACK

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: avoid null pointer dereference on OSN

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: unbreak OSM and OSN support

Ursula Braun <ubraun@linux.vnet.ibm.com>
    s390/qeth: handle sysfs error during initialization

Eric Dumazet <edumazet@google.com>
    dccp/tcp: do not inherit mc_list from parent

Eric Dumazet <edumazet@google.com>
    netem: fix skb_orphan_partial()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms"


-------------

Diffstat:

 Makefile                                |  4 +--
 drivers/char/pcmcia/cm4040_cs.c         |  6 ++--
 drivers/gpu/drm/gma500/psb_intel_lvds.c | 18 +++++++-----
 drivers/gpu/drm/radeon/ci_dpm.c         |  6 ++++
 drivers/i2c/busses/i2c-tiny-usb.c       | 25 ++++++++++++++---
 drivers/net/usb/qmi_wwan.c              |  2 ++
 drivers/s390/net/qeth_core.h            |  4 +++
 drivers/s390/net/qeth_core_main.c       | 21 ++++++++------
 drivers/s390/net/qeth_core_sys.c        | 24 ++++++++++------
 drivers/s390/net/qeth_l2.h              |  2 ++
 drivers/s390/net/qeth_l2_main.c         | 26 +++++++++++++----
 drivers/s390/net/qeth_l2_sys.c          |  8 ++++++
 drivers/s390/net/qeth_l3_main.c         |  6 +++-
 fs/xfs/libxfs/xfs_bmap.c                |  7 +++--
 fs/xfs/libxfs/xfs_btree.c               |  2 +-
 fs/xfs/xfs_bmap_util.c                  |  2 +-
 fs/xfs/xfs_buf.c                        | 24 ++++++++++++++++
 fs/xfs/xfs_buf.h                        |  1 +
 fs/xfs/xfs_dir2_readdir.c               | 15 +++++++---
 fs/xfs/xfs_file.c                       | 31 +++++++--------------
 fs/xfs/xfs_ioctl.c                      |  5 ++--
 fs/xfs/xfs_qm.c                         |  7 +----
 kernel/fork.c                           |  2 +-
 mm/memory-failure.c                     |  8 ++----
 mm/mlock.c                              |  5 ++--
 mm/slub.c                               |  6 ++--
 net/core/sock.c                         | 12 ++++----
 net/ipv4/inet_connection_sock.c         |  2 ++
 net/ipv4/tcp.c                          |  7 +++--
 net/ipv4/tcp_input.c                    | 11 ++++----
 net/ipv6/ip6_offload.c                  |  7 +++--
 net/ipv6/ip6_output.c                   | 20 ++++++++------
 net/ipv6/output_core.c                  | 14 ++++++----
 net/ipv6/udp_offload.c                  |  6 +++-
 net/sctp/input.c                        | 16 ++++++-----
 net/sctp/ipv6.c                         | 49 +++++++++++++++++++++------------
 sound/pci/hda/patch_sigmatel.c          |  2 ++
 37 files changed, 269 insertions(+), 144 deletions(-)

[PATCH 3.18 02/33] netem: fix skb_orphan_partial()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit f6ba8d33cfbb46df569972e64dbb5bb7e929bfd9 upstream.

I should have known that lowering skb->truesize was dangerous :/

In case packets are not leaving the host via a standard Ethernet device,
but looped back to local sockets, bad things can happen, as reported
by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 )

So instead of tweaking skb->truesize, lets change skb->destructor
and keep a reference on the owner socket via its sk_refcnt.

Fixes: f2f872f9272a ("netem: Introduce skb_orphan_partial() helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michael Madsen <mkm@nabto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/sock.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1633,17 +1633,17 @@ EXPORT_SYMBOL(sock_wfree);
 
 void skb_orphan_partial(struct sk_buff *skb)
 {
-	/* TCP stack sets skb->ooo_okay based on sk_wmem_alloc,
-	 * so we do not completely orphan skb, but transfert all
-	 * accounted bytes but one, to avoid unexpected reorders.
-	 */
 	if (skb->destructor == sock_wfree
 #ifdef CONFIG_INET
 	    || skb->destructor == tcp_wfree
 #endif
 		) {
-		atomic_sub(skb->truesize - 1, &skb->sk->sk_wmem_alloc);
-		skb->truesize = 1;
+		struct sock *sk = skb->sk;
+
+		if (atomic_inc_not_zero(&sk->sk_refcnt)) {
+			atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
+			skb->destructor = sock_efree;
+		}
 	} else {
 		skb_orphan(skb);
 	}

[PATCH 3.18 03/33] dccp/tcp: do not inherit mc_list from parent

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit 657831ffc38e30092a2d5f03d385d710eb88b09a ]

syzkaller found a way to trigger double frees from ip_mc_drop_socket()

It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.

Very similar to commit 8b485ce69876 ("tcp: do not inherit
fastopen_req from parent")

Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/inet_connection_sock.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -677,6 +677,8 @@ struct sock *inet_csk_clone_lock(const s
 		inet_sk(newsk)->inet_sport = htons(inet_rsk(req)->ir_num);
 		newsk->sk_write_space = sk_stream_write_space;
 
+		inet_sk(newsk)->mc_list = NULL;
+
 		newsk->sk_mark = inet_rsk(req)->ir_mark;
 
 		newicsk->icsk_retransmits = 0;

[PATCH 3.18 04/33] s390/qeth: handle sysfs error during initialization

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ursula Braun <ubraun@linux.vnet.ibm.com>


[ Upstream commit 9111e7880ccf419548c7b0887df020b08eadb075 ]

When setting up the device from within the layer discipline's
probe routine, creating the layer-specific sysfs attributes can fail.
Report this error back to the caller, and handle it by
releasing the layer discipline.

Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
[jwi: updated commit msg, moved an OSN change to a subsequent patch]
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |    4 +++-
 drivers/s390/net/qeth_core_sys.c  |    2 ++
 drivers/s390/net/qeth_l2_main.c   |    5 ++++-
 drivers/s390/net/qeth_l3_main.c   |    5 ++++-
 4 files changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5505,8 +5505,10 @@ static int qeth_core_set_online(struct c
 		if (rc)
 			goto err;
 		rc = card->discipline->setup(card->gdev);
-		if (rc)
+		if (rc) {
+			qeth_core_free_discipline(card);
 			goto err;
+		}
 	}
 	rc = card->discipline->set_online(gdev);
 err:
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -459,6 +459,8 @@ static ssize_t qeth_dev_layer2_store(str
 		goto out;
 
 	rc = card->discipline->setup(card->gdev);
+	if (rc)
+		qeth_core_free_discipline(card);
 out:
 	mutex_unlock(&card->discipline_mutex);
 	return rc ? rc : count;
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -890,8 +890,11 @@ static int qeth_l2_stop(struct net_devic
 static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc;
 
-	qeth_l2_create_device_attributes(&gdev->dev);
+	rc = qeth_l2_create_device_attributes(&gdev->dev);
+	if (rc)
+		return rc;
 	INIT_LIST_HEAD(&card->vid_list);
 	INIT_LIST_HEAD(&card->mc_list);
 	card->options.layer2 = 1;
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3317,8 +3317,11 @@ static int qeth_l3_setup_netdev(struct q
 static int qeth_l3_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+	int rc;
 
-	qeth_l3_create_device_attributes(&gdev->dev);
+	rc = qeth_l3_create_device_attributes(&gdev->dev);
+	if (rc)
+		return rc;
 	card->options.layer2 = 0;
 	card->info.hwtrap = 0;
 	return 0;

[PATCH 3.18 05/33] s390/qeth: unbreak OSM and OSN support

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 ]

commit b4d72c08b358 ("qeth: bridgeport support - basic control")
broke the support for OSM and OSN devices as follows:

As OSM and OSN are L2 only, qeth_core_probe_device() does an early
setup by loading the l2 discipline and calling qeth_l2_probe_device().
In this context, adding the l2-specific bridgeport sysfs attributes
via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c,
since the basic sysfs infrastructure for the device hasn't been
established yet.

Note that OSN actually has its own unique sysfs attributes
(qeth_osn_devtype), so the additional attributes shouldn't be created
at all.
For OSM, add a new qeth_l2_devtype that contains all the common
and l2-specific sysfs attributes.
When qeth_core_probe_device() does early setup for OSM or OSN, assign
the corresponding devtype so that the ccwgroup probe code creates the
full set of sysfs attributes.
This allows us to skip qeth_l2_create_device_attributes() in case
of an early setup.

Any device that can't do early setup will initially have only the
generic sysfs attributes, and when it's probed later
qeth_l2_probe_device() adds the l2-specific attributes.

If an early-setup device is removed (by calling ccwgroup_ungroup()),
device_unregister() will - using the devtype - delete the
l2-specific attributes before qeth_l2_remove_device() is called.
So make sure to not remove them twice.

What complicates the issue is that qeth_l2_probe_device() and
qeth_l2_remove_device() is also called on a device when its
layer2 attribute changes (ie. its layer mode is switched).
For early-setup devices this wouldn't work properly - we wouldn't
remove the l2-specific attributes when switching to L3.
But switching the layer mode doesn't actually make any sense;
we already decided that the device can only operate in L2!
So just refuse to switch the layer mode on such devices. Note that
OSN doesn't have a layer2 attribute, so we only need to special-case
OSM.

Based on an initial patch by Ursula Braun.

Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_core.h      |    4 ++++
 drivers/s390/net/qeth_core_main.c |   17 +++++++++--------
 drivers/s390/net/qeth_core_sys.c  |   22 ++++++++++++++--------
 drivers/s390/net/qeth_l2.h        |    2 ++
 drivers/s390/net/qeth_l2_main.c   |   17 +++++++++++++----
 drivers/s390/net/qeth_l2_sys.c    |    8 ++++++++
 drivers/s390/net/qeth_l3_main.c   |    1 +
 7 files changed, 51 insertions(+), 20 deletions(-)

--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -722,6 +722,7 @@ enum qeth_discipline_id {
 };
 
 struct qeth_discipline {
+	const struct device_type *devtype;
 	void (*start_poll)(struct ccw_device *, int, unsigned long);
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
@@ -887,6 +888,9 @@ extern struct qeth_discipline qeth_l2_di
 extern struct qeth_discipline qeth_l3_discipline;
 extern const struct attribute_group *qeth_generic_attr_groups[];
 extern const struct attribute_group *qeth_osn_attr_groups[];
+extern const struct attribute_group qeth_device_attr_group;
+extern const struct attribute_group qeth_device_blkt_group;
+extern const struct device_type qeth_generic_devtype;
 extern struct workqueue_struct *qeth_wq;
 
 int qeth_card_hw_is_reachable(struct qeth_card *);
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5304,10 +5304,12 @@ void qeth_core_free_discipline(struct qe
 	card->discipline = NULL;
 }
 
-static const struct device_type qeth_generic_devtype = {
+const struct device_type qeth_generic_devtype = {
 	.name = "qeth_generic",
 	.groups = qeth_generic_attr_groups,
 };
+EXPORT_SYMBOL_GPL(qeth_generic_devtype);
+
 static const struct device_type qeth_osn_devtype = {
 	.name = "qeth_osn",
 	.groups = qeth_osn_attr_groups,
@@ -5433,23 +5435,22 @@ static int qeth_core_probe_device(struct
 		goto err_card;
 	}
 
-	if (card->info.type == QETH_CARD_TYPE_OSN)
-		gdev->dev.type = &qeth_osn_devtype;
-	else
-		gdev->dev.type = &qeth_generic_devtype;
-
 	switch (card->info.type) {
 	case QETH_CARD_TYPE_OSN:
 	case QETH_CARD_TYPE_OSM:
 		rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2);
 		if (rc)
 			goto err_card;
+
+		gdev->dev.type = (card->info.type != QETH_CARD_TYPE_OSN)
+					? card->discipline->devtype
+					: &qeth_osn_devtype;
 		rc = card->discipline->setup(card->gdev);
 		if (rc)
 			goto err_disc;
-	case QETH_CARD_TYPE_OSD:
-	case QETH_CARD_TYPE_OSX:
+		break;
 	default:
+		gdev->dev.type = &qeth_generic_devtype;
 		break;
 	}
 
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -446,12 +446,16 @@ static ssize_t qeth_dev_layer2_store(str
 
 	if (card->options.layer2 == newdis)
 		goto out;
-	else {
-		card->info.mac_bits  = 0;
-		if (card->discipline) {
-			card->discipline->remove(card->gdev);
-			qeth_core_free_discipline(card);
-		}
+	if (card->info.type == QETH_CARD_TYPE_OSM) {
+		/* fixed layer, can't switch */
+		rc = -EOPNOTSUPP;
+		goto out;
+	}
+
+	card->info.mac_bits = 0;
+	if (card->discipline) {
+		card->discipline->remove(card->gdev);
+		qeth_core_free_discipline(card);
 	}
 
 	rc = qeth_core_load_discipline(card, newdis);
@@ -745,10 +749,11 @@ static struct attribute *qeth_blkt_devic
 	&dev_attr_inter_jumbo.attr,
 	NULL,
 };
-static struct attribute_group qeth_device_blkt_group = {
+const struct attribute_group qeth_device_blkt_group = {
 	.name = "blkt",
 	.attrs = qeth_blkt_device_attrs,
 };
+EXPORT_SYMBOL_GPL(qeth_device_blkt_group);
 
 static struct attribute *qeth_device_attrs[] = {
 	&dev_attr_state.attr,
@@ -768,9 +773,10 @@ static struct attribute *qeth_device_att
 	&dev_attr_switch_attrs.attr,
 	NULL,
 };
-static struct attribute_group qeth_device_attr_group = {
+const struct attribute_group qeth_device_attr_group = {
 	.attrs = qeth_device_attrs,
 };
+EXPORT_SYMBOL_GPL(qeth_device_attr_group);
 
 const struct attribute_group *qeth_generic_attr_groups[] = {
 	&qeth_device_attr_group,
--- a/drivers/s390/net/qeth_l2.h
+++ b/drivers/s390/net/qeth_l2.h
@@ -8,6 +8,8 @@
 
 #include "qeth_core.h"
 
+extern const struct attribute_group *qeth_l2_attr_groups[];
+
 int qeth_l2_create_device_attributes(struct device *);
 void qeth_l2_remove_device_attributes(struct device *);
 void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card);
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -887,14 +887,21 @@ static int qeth_l2_stop(struct net_devic
 	return 0;
 }
 
+static const struct device_type qeth_l2_devtype = {
+	.name = "qeth_layer2",
+	.groups = qeth_l2_attr_groups,
+};
+
 static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card = dev_get_drvdata(&gdev->dev);
 	int rc;
 
-	rc = qeth_l2_create_device_attributes(&gdev->dev);
-	if (rc)
-		return rc;
+	if (gdev->dev.type == &qeth_generic_devtype) {
+		rc = qeth_l2_create_device_attributes(&gdev->dev);
+		if (rc)
+			return rc;
+	}
 	INIT_LIST_HEAD(&card->vid_list);
 	INIT_LIST_HEAD(&card->mc_list);
 	card->options.layer2 = 1;
@@ -906,7 +913,8 @@ static void qeth_l2_remove_device(struct
 {
 	struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
 
-	qeth_l2_remove_device_attributes(&cgdev->dev);
+	if (cgdev->dev.type == &qeth_generic_devtype)
+		qeth_l2_remove_device_attributes(&cgdev->dev);
 	qeth_set_allowed_threads(card, 0, 1);
 	wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
 
@@ -1276,6 +1284,7 @@ static int qeth_l2_control_event(struct
 }
 
 struct qeth_discipline qeth_l2_discipline = {
+	.devtype = &qeth_l2_devtype,
 	.start_poll = qeth_qdio_start_poll,
 	.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
 	.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,
--- a/drivers/s390/net/qeth_l2_sys.c
+++ b/drivers/s390/net/qeth_l2_sys.c
@@ -216,3 +216,11 @@ void qeth_l2_setup_bridgeport_attrs(stru
 	} else
 		qeth_bridgeport_an_set(card, 0);
 }
+
+const struct attribute_group *qeth_l2_attr_groups[] = {
+	&qeth_device_attr_group,
+	&qeth_device_blkt_group,
+	/* l2 specific, see l2_{create,remove}_device_attributes(): */
+	&qeth_l2_bridgeport_attr_group,
+	NULL,
+};
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3612,6 +3612,7 @@ static int qeth_l3_control_event(struct
 }
 
 struct qeth_discipline qeth_l3_discipline = {
+	.devtype = &qeth_generic_devtype,
 	.start_poll = qeth_qdio_start_poll,
 	.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
 	.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,

[PATCH 3.18 06/33] s390/qeth: avoid null pointer dereference on OSN

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit 25e2c341e7818a394da9abc403716278ee646014 ]

Access card->dev only after checking whether's its valid.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l2_main.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -970,7 +970,6 @@ static int qeth_l2_setup_netdev(struct q
 	case QETH_CARD_TYPE_OSN:
 		card->dev = alloc_netdev(0, "osn%d", NET_NAME_UNKNOWN,
 					 ether_setup);
-		card->dev->flags |= IFF_NOARP;
 		break;
 	default:
 		card->dev = alloc_etherdev(0);
@@ -983,9 +982,12 @@ static int qeth_l2_setup_netdev(struct q
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->mtu = card->info.initial_mtu;
 	card->dev->netdev_ops = &qeth_l2_netdev_ops;
-	card->dev->ethtool_ops =
-		(card->info.type != QETH_CARD_TYPE_OSN) ?
-		&qeth_l2_ethtool_ops : &qeth_l2_osn_ops;
+	if (card->info.type == QETH_CARD_TYPE_OSN) {
+		card->dev->ethtool_ops = &qeth_l2_osn_ops;
+		card->dev->flags |= IFF_NOARP;
+	} else {
+		card->dev->ethtool_ops = &qeth_l2_ethtool_ops;
+	}
 	card->dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 	card->info.broadcast_capable = 1;
 	qeth_l2_request_initial_mac(card);

[PATCH 3.18 07/33] tcp: avoid fragmenting peculiar skbs in SACK

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <ycheng@google.com>


[ Upstream commit b451e5d24ba6687c6f0e7319c727a709a1846c06 ]

This patch fixes a bug in splitting an SKB during SACK
processing. Specifically if an skb contains multiple
packets and is only partially sacked in the higher sequences,
tcp_match_sack_to_skb() splits the skb and marks the second fragment
as SACKed.

The current code further attempts rounding up the first fragment
to MSS boundaries. But it misses a boundary condition when the
rounded-up fragment size (pkt_len) is exactly skb size.  Spliting
such an skb is pointless and causses a kernel warning and aborts
the SACK processing. This patch universally checks such over-split
before calling tcp_fragment to prevent these unnecessary warnings.

Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1171,13 +1171,14 @@ static int tcp_match_skb_to_sack(struct
 		 */
 		if (pkt_len > mss) {
 			unsigned int new_len = (pkt_len / mss) * mss;
-			if (!in_sack && new_len < pkt_len) {
+			if (!in_sack && new_len < pkt_len)
 				new_len += mss;
-				if (new_len >= skb->len)
-					return 0;
-			}
 			pkt_len = new_len;
 		}
+
+		if (pkt_len >= skb->len && !in_sack)
+			return 0;
+
 		err = tcp_fragment(sk, skb, pkt_len, mss, GFP_ATOMIC);
 		if (err < 0)
 			return err;

[PATCH 3.18 08/33] sctp: fix src address selection if using secondary addresses for ipv6

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>


[ Upstream commit dbc2b5e9a09e9a6664679a667ff81cff6e5f2641 ]

Commit 0ca50d12fe46 ("sctp: fix src address selection if using secondary
addresses") has fixed a src address selection issue when using secondary
addresses for ipv4.

Now sctp ipv6 also has the similar issue. When using a secondary address,
sctp_v6_get_dst tries to choose the saddr which has the most same bits
with the daddr by sctp_v6_addr_match_len. It may make some cases not work
as expected.

hostA:
  [1] fd21:356b:459a:cf10::11 (eth1)
  [2] fd21:356b:459a:cf20::11 (eth2)

hostB:
  [a] fd21:356b:459a:cf30::2  (eth1)
  [b] fd21:356b:459a:cf40::2  (eth2)

route from hostA to hostB:
  fd21:356b:459a:cf30::/64 dev eth1  metric 1024  mtu 1500

The expected path should be:
  fd21:356b:459a:cf10::11 <-> fd21:356b:459a:cf30::2
But addr[2] matches addr[a] more bits than addr[1] does, according to
sctp_v6_addr_match_len. It causes the path to be:
  fd21:356b:459a:cf20::11 <-> fd21:356b:459a:cf30::2

This patch is to fix it with the same way as Marcelo's fix for sctp ipv4.
As no ip_dev_find for ipv6, this patch is to use ipv6_chk_addr to check
if the saddr is in a dev instead.

Note that for backwards compatibility, it will still do the addr_match_len
check here when no optimal is found.

Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/ipv6.c |   46 +++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 17 deletions(-)

--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -239,12 +239,10 @@ static void sctp_v6_get_dst(struct sctp_
 	struct sctp_bind_addr *bp;
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct sctp_sockaddr_entry *laddr;
-	union sctp_addr *baddr = NULL;
 	union sctp_addr *daddr = &t->ipaddr;
 	union sctp_addr dst_saddr;
 	struct in6_addr *final_p, final;
 	__u8 matchlen = 0;
-	__u8 bmatchlen;
 	sctp_scope_t scope;
 
 	memset(fl6, 0, sizeof(struct flowi6));
@@ -311,23 +309,37 @@ static void sctp_v6_get_dst(struct sctp_
 	 */
 	rcu_read_lock();
 	list_for_each_entry_rcu(laddr, &bp->address_list, list) {
-		if (!laddr->valid)
+		struct dst_entry *bdst;
+		__u8 bmatchlen;
+
+		if (!laddr->valid ||
+		    laddr->state != SCTP_ADDR_SRC ||
+		    laddr->a.sa.sa_family != AF_INET6 ||
+		    scope > sctp_scope(&laddr->a))
 			continue;
-		if ((laddr->state == SCTP_ADDR_SRC) &&
-		    (laddr->a.sa.sa_family == AF_INET6) &&
-		    (scope <= sctp_scope(&laddr->a))) {
-			bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
-			if (!baddr || (matchlen < bmatchlen)) {
-				baddr = &laddr->a;
-				matchlen = bmatchlen;
-			}
-		}
-	}
-	if (baddr) {
-		fl6->saddr = baddr->v6.sin6_addr;
-		fl6->fl6_sport = baddr->v6.sin6_port;
+
+		fl6->saddr = laddr->a.v6.sin6_addr;
+		fl6->fl6_sport = laddr->a.v6.sin6_port;
 		final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
-		dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+		bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+
+		if (!IS_ERR(bdst) &&
+		    ipv6_chk_addr(dev_net(bdst->dev),
+				  &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
+			if (!IS_ERR_OR_NULL(dst))
+				dst_release(dst);
+			dst = bdst;
+			break;
+		}
+
+		bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+		if (matchlen > bmatchlen)
+			continue;
+
+		if (!IS_ERR_OR_NULL(dst))
+			dst_release(dst);
+		dst = bdst;
+		matchlen = bmatchlen;
 	}
 	rcu_read_unlock();
 

[PATCH 3.18 09/33] sctp: do not inherit ipv6_{mc|ac|fl}_list from parent

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit fdcee2cbb8438702ea1b328fb6e0ac5e9a40c7f8 ]

SCTP needs fixes similar to 83eaddab4378 ("ipv6/dccp: do not inherit
ipv6_mc_list from parent"), otherwise bad things can happen.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/ipv6.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -673,6 +673,9 @@ static struct sock *sctp_v6_create_accep
 	newnp = inet6_sk(newsk);
 
 	memcpy(newnp, np, sizeof(struct ipv6_pinfo));
+	newnp->ipv6_mc_list = NULL;
+	newnp->ipv6_ac_list = NULL;
+	newnp->ipv6_fl_list = NULL;
 
 	rcu_read_lock();
 	opt = rcu_dereference(np->opt);

[PATCH 3.18 10/33] tcp: eliminate negative reordering in tcp_clean_rtx_queue

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Soheil Hassas Yeganeh <soheil@google.com>


[ Upstream commit bafbb9c73241760023d8981191ddd30bb1c6dbac ]

tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.

Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.

Fixes: c7caf8d3ed7a ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: Rebecca Isaacs <risaacs@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3173,7 +3173,7 @@ static int tcp_clean_rtx_queue(struct so
 			int delta;
 
 			/* Non-retransmitted hole got filled? That's reordering */
-			if (reord < prior_fackets)
+			if (reord < prior_fackets && reord <= tp->fackets_out)
 				tcp_update_reordering(sk, tp->fackets_out - reord, 0);
 
 			delta = tcp_is_fack(tp) ? pkts_acked :

[PATCH 3.18 11/33] ipv6: Prevent overrun when parsing v6 header options

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Craig Gallek <kraig@google.com>


[ Upstream commit 2423496af35d94a87156b063ea5cedffc10a70a1 ]

The KASAN warning repoted below was discovered with a syzkaller
program.  The reproducer is basically:
  int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP);
  send(s, &one_byte_of_data, 1, MSG_MORE);
  send(s, &more_than_mtu_bytes_data, 2000, 0);

The socket() call sets the nexthdr field of the v6 header to
NEXTHDR_HOP, the first send call primes the payload with a non zero
byte of data, and the second send call triggers the fragmentation path.

The fragmentation code tries to parse the header options in order
to figure out where to insert the fragment option.  Since nexthdr points
to an invalid option, the calculation of the size of the network header
can made to be much larger than the linear section of the skb and data
is read outside of it.

This fix makes ip6_find_1stfrag return an error if it detects
running out-of-bounds.

[   42.361487] ==================================================================
[   42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730
[   42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789
[   42.366469]
[   42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41
[   42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014
[   42.368824] Call Trace:
[   42.369183]  dump_stack+0xb3/0x10b
[   42.369664]  print_address_description+0x73/0x290
[   42.370325]  kasan_report+0x252/0x370
[   42.370839]  ? ip6_fragment+0x11c8/0x3730
[   42.371396]  check_memory_region+0x13c/0x1a0
[   42.371978]  memcpy+0x23/0x50
[   42.372395]  ip6_fragment+0x11c8/0x3730
[   42.372920]  ? nf_ct_expect_unregister_notifier+0x110/0x110
[   42.373681]  ? ip6_copy_metadata+0x7f0/0x7f0
[   42.374263]  ? ip6_forward+0x2e30/0x2e30
[   42.374803]  ip6_finish_output+0x584/0x990
[   42.375350]  ip6_output+0x1b7/0x690
[   42.375836]  ? ip6_finish_output+0x990/0x990
[   42.376411]  ? ip6_fragment+0x3730/0x3730
[   42.376968]  ip6_local_out+0x95/0x160
[   42.377471]  ip6_send_skb+0xa1/0x330
[   42.377969]  ip6_push_pending_frames+0xb3/0xe0
[   42.378589]  rawv6_sendmsg+0x2051/0x2db0
[   42.379129]  ? rawv6_bind+0x8b0/0x8b0
[   42.379633]  ? _copy_from_user+0x84/0xe0
[   42.380193]  ? debug_check_no_locks_freed+0x290/0x290
[   42.380878]  ? ___sys_sendmsg+0x162/0x930
[   42.381427]  ? rcu_read_lock_sched_held+0xa3/0x120
[   42.382074]  ? sock_has_perm+0x1f6/0x290
[   42.382614]  ? ___sys_sendmsg+0x167/0x930
[   42.383173]  ? lock_downgrade+0x660/0x660
[   42.383727]  inet_sendmsg+0x123/0x500
[   42.384226]  ? inet_sendmsg+0x123/0x500
[   42.384748]  ? inet_recvmsg+0x540/0x540
[   42.385263]  sock_sendmsg+0xca/0x110
[   42.385758]  SYSC_sendto+0x217/0x380
[   42.386249]  ? SYSC_connect+0x310/0x310
[   42.386783]  ? __might_fault+0x110/0x1d0
[   42.387324]  ? lock_downgrade+0x660/0x660
[   42.387880]  ? __fget_light+0xa1/0x1f0
[   42.388403]  ? __fdget+0x18/0x20
[   42.388851]  ? sock_common_setsockopt+0x95/0xd0
[   42.389472]  ? SyS_setsockopt+0x17f/0x260
[   42.390021]  ? entry_SYSCALL_64_fastpath+0x5/0xbe
[   42.390650]  SyS_sendto+0x40/0x50
[   42.391103]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.391731] RIP: 0033:0x7fbbb711e383
[   42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[   42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383
[   42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003
[   42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018
[   42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad
[   42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00
[   42.397257]
[   42.397411] Allocated by task 3789:
[   42.397702]  save_stack_trace+0x16/0x20
[   42.398005]  save_stack+0x46/0xd0
[   42.398267]  kasan_kmalloc+0xad/0xe0
[   42.398548]  kasan_slab_alloc+0x12/0x20
[   42.398848]  __kmalloc_node_track_caller+0xcb/0x380
[   42.399224]  __kmalloc_reserve.isra.32+0x41/0xe0
[   42.399654]  __alloc_skb+0xf8/0x580
[   42.400003]  sock_wmalloc+0xab/0xf0
[   42.400346]  __ip6_append_data.isra.41+0x2472/0x33d0
[   42.400813]  ip6_append_data+0x1a8/0x2f0
[   42.401122]  rawv6_sendmsg+0x11ee/0x2db0
[   42.401505]  inet_sendmsg+0x123/0x500
[   42.401860]  sock_sendmsg+0xca/0x110
[   42.402209]  ___sys_sendmsg+0x7cb/0x930
[   42.402582]  __sys_sendmsg+0xd9/0x190
[   42.402941]  SyS_sendmsg+0x2d/0x50
[   42.403273]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.403718]
[   42.403871] Freed by task 1794:
[   42.404146]  save_stack_trace+0x16/0x20
[   42.404515]  save_stack+0x46/0xd0
[   42.404827]  kasan_slab_free+0x72/0xc0
[   42.405167]  kfree+0xe8/0x2b0
[   42.405462]  skb_free_head+0x74/0xb0
[   42.405806]  skb_release_data+0x30e/0x3a0
[   42.406198]  skb_release_all+0x4a/0x60
[   42.406563]  consume_skb+0x113/0x2e0
[   42.406910]  skb_free_datagram+0x1a/0xe0
[   42.407288]  netlink_recvmsg+0x60d/0xe40
[   42.407667]  sock_recvmsg+0xd7/0x110
[   42.408022]  ___sys_recvmsg+0x25c/0x580
[   42.408395]  __sys_recvmsg+0xd6/0x190
[   42.408753]  SyS_recvmsg+0x2d/0x50
[   42.409086]  entry_SYSCALL_64_fastpath+0x1f/0xbe
[   42.409513]
[   42.409665] The buggy address belongs to the object at ffff88000969e780
[   42.409665]  which belongs to the cache kmalloc-512 of size 512
[   42.410846] The buggy address is located 24 bytes inside of
[   42.410846]  512-byte region [ffff88000969e780, ffff88000969e980)
[   42.411941] The buggy address belongs to the page:
[   42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping:          (null) index:0x0 compound_mapcount: 0
[   42.413298] flags: 0x100000000008100(slab|head)
[   42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c
[   42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000
[   42.415074] page dumped because: kasan: bad access detected
[   42.415604]
[   42.415757] Memory state around the buggy address:
[   42.416222]  ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.416904]  ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   42.418273]                    ^
[   42.418588]  ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419273]  ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   42.419882] ==================================================================

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_offload.c |    2 ++
 net/ipv6/ip6_output.c  |    4 ++++
 net/ipv6/output_core.c |   14 ++++++++------
 net/ipv6/udp_offload.c |    2 ++
 4 files changed, 16 insertions(+), 6 deletions(-)

--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -122,6 +122,8 @@ static struct sk_buff *ipv6_gso_segment(
 
 		if (udpfrag) {
 			unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+			if (unfrag_ip6hlen < 0)
+				return ERR_PTR(unfrag_ip6hlen);
 			fptr = (struct frag_hdr *)((u8 *)ipv6h + unfrag_ip6hlen);
 			fptr->frag_off = htons(offset);
 			if (skb->next != NULL)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -570,6 +570,10 @@ int ip6_fragment(struct sk_buff *skb, in
 	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	hlen = ip6_find_1stfragopt(skb, &prevhdr);
+	if (hlen < 0) {
+		err = hlen;
+		goto fail;
+	}
 	nexthdr = *prevhdr;
 
 	mtu = ip6_skb_dst_mtu(skb);
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -45,14 +45,13 @@ EXPORT_SYMBOL_GPL(ipv6_proxy_select_iden
 int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
 {
 	u16 offset = sizeof(struct ipv6hdr);
-	struct ipv6_opt_hdr *exthdr =
-				(struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
 	unsigned int packet_len = skb_tail_pointer(skb) -
 		skb_network_header(skb);
 	int found_rhdr = 0;
 	*nexthdr = &ipv6_hdr(skb)->nexthdr;
 
-	while (offset + 1 <= packet_len) {
+	while (offset <= packet_len) {
+		struct ipv6_opt_hdr *exthdr;
 
 		switch (**nexthdr) {
 
@@ -73,13 +72,16 @@ int ip6_find_1stfragopt(struct sk_buff *
 			return offset;
 		}
 
-		offset += ipv6_optlen(exthdr);
-		*nexthdr = &exthdr->nexthdr;
+		if (offset + sizeof(struct ipv6_opt_hdr) > packet_len)
+			return -EINVAL;
+
 		exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
 						 offset);
+		offset += ipv6_optlen(exthdr);
+		*nexthdr = &exthdr->nexthdr;
 	}
 
-	return offset;
+	return -EINVAL;
 }
 EXPORT_SYMBOL(ip6_find_1stfragopt);
 
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -94,6 +94,8 @@ static struct sk_buff *udp6_ufo_fragment
 		 * bytes to insert fragment header.
 		 */
 		unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+		if (unfrag_ip6hlen < 0)
+			return ERR_PTR(unfrag_ip6hlen);
 		nexthdr = *prevhdr;
 		*prevhdr = NEXTHDR_FRAGMENT;
 		unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +

[PATCH 3.18 12/33] ipv6: Check ip6_find_1stfragopt() return value properly.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>


[ Upstream commit 7dd7eb9513bd02184d45f000ab69d78cb1fa1531 ]

Do not use unsigned variables to see if it returns a negative
error or not.

Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_offload.c |    9 ++++-----
 net/ipv6/ip6_output.c  |    7 +++----
 net/ipv6/udp_offload.c |    8 +++++---
 3 files changed, 12 insertions(+), 12 deletions(-)

--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -62,7 +62,6 @@ static struct sk_buff *ipv6_gso_segment(
 	const struct net_offload *ops;
 	int proto;
 	struct frag_hdr *fptr;
-	unsigned int unfrag_ip6hlen;
 	u8 *prevhdr;
 	int offset = 0;
 	bool encap, udpfrag;
@@ -121,10 +120,10 @@ static struct sk_buff *ipv6_gso_segment(
 		skb->network_header = (u8 *)ipv6h - skb->head;
 
 		if (udpfrag) {
-			unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
-			if (unfrag_ip6hlen < 0)
-				return ERR_PTR(unfrag_ip6hlen);
-			fptr = (struct frag_hdr *)((u8 *)ipv6h + unfrag_ip6hlen);
+			int err = ip6_find_1stfragopt(skb, &prevhdr);
+			if (err < 0)
+				return ERR_PTR(err);
+			fptr = (struct frag_hdr *)((u8 *)ipv6h + err);
 			fptr->frag_off = htons(offset);
 			if (skb->next != NULL)
 				fptr->frag_off |= htons(IP6_MF);
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -569,11 +569,10 @@ int ip6_fragment(struct sk_buff *skb, in
 	u8 *prevhdr, nexthdr = 0;
 	struct net *net = dev_net(skb_dst(skb)->dev);
 
-	hlen = ip6_find_1stfragopt(skb, &prevhdr);
-	if (hlen < 0) {
-		err = hlen;
+	err = ip6_find_1stfragopt(skb, &prevhdr);
+	if (err < 0)
 		goto fail;
-	}
+	hlen = err;
 	nexthdr = *prevhdr;
 
 	mtu = ip6_skb_dst_mtu(skb);
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -29,6 +29,7 @@ static struct sk_buff *udp6_ufo_fragment
 	u8 frag_hdr_sz = sizeof(struct frag_hdr);
 	__wsum csum;
 	int tnl_hlen;
+	int err;
 
 	mss = skb_shinfo(skb)->gso_size;
 	if (unlikely(skb->len <= mss))
@@ -93,9 +94,10 @@ static struct sk_buff *udp6_ufo_fragment
 		/* Find the unfragmentable header and shift it left by frag_hdr_sz
 		 * bytes to insert fragment header.
 		 */
-		unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
-		if (unfrag_ip6hlen < 0)
-			return ERR_PTR(unfrag_ip6hlen);
+		err = ip6_find_1stfragopt(skb, &prevhdr);
+		if (err < 0)
+			return ERR_PTR(err);
+		unfrag_ip6hlen = err;
 		nexthdr = *prevhdr;
 		*prevhdr = NEXTHDR_FRAGMENT;
 		unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +

[PATCH 3.18 14/33] ipv6: fix out of bound writes in __ip6_append_data()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit 232cd35d0804cc241eb887bb8d4d9b3b9881c64a ]

Andrey Konovalov and idaifish@gmail.com reported crashes caused by
one skb shared_info being overwritten from __ip6_append_data()

Andrey program lead to following state :

copy -4200 datalen 2000 fraglen 2040
maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200

The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen,
fraggap, 0); is overwriting skb->head and skb_shared_info

Since we apparently detect this rare condition too late, move the
code earlier to even avoid allocating skb and risking crashes.

Once again, many thanks to Andrey and syzkaller team.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: <idaifish@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_output.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1376,6 +1376,11 @@ alloc_new_skb:
 			 */
 			alloclen += sizeof(struct frag_hdr);
 
+			copy = datalen - transhdrlen - fraggap;
+			if (copy < 0) {
+				err = -EINVAL;
+				goto error;
+			}
 			if (transhdrlen) {
 				skb = sock_alloc_send_skb(sk,
 						alloclen + hh_len,
@@ -1425,13 +1430,9 @@ alloc_new_skb:
 				data += fraggap;
 				pskb_trim_unique(skb_prev, maxfraglen);
 			}
-			copy = datalen - transhdrlen - fraggap;
-
-			if (copy < 0) {
-				err = -EINVAL;
-				kfree_skb(skb);
-				goto error;
-			} else if (copy > 0 && getfrag(from, data + transhdrlen, offset, copy, fraggap, skb) < 0) {
+			if (copy > 0 &&
+			    getfrag(from, data + transhdrlen, offset,
+				    copy, fraggap, skb) < 0) {
 				err = -EFAULT;
 				kfree_skb(skb);
 				goto error;

[PATCH 3.18 15/33] tcp: avoid fastopen API to be used on AF_UNSPEC

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Wang <weiwan@google.com>


[ Upstream commit ba615f675281d76fd19aa03558777f81fb6b6084 ]

Fastopen API should be used to perform fastopen operations on the TCP
socket. It does not make sense to use fastopen API to perform disconnect
by calling it with AF_UNSPEC. The fastopen data path is also prone to
race conditions and bugs when using with AF_UNSPEC.

One issue reported and analyzed by Vegard Nossum is as follows:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thread A:                            Thread B:
------------------------------------------------------------------------
sendto()
 - tcp_sendmsg()
     - sk_stream_memory_free() = 0
         - goto wait_for_sndbuf
	     - sk_stream_wait_memory()
	        - sk_wait_event() // sleep
          |                          sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
	  |                           - tcp_sendmsg()
	  |                              - tcp_sendmsg_fastopen()
	  |                                 - __inet_stream_connect()
	  |                                    - tcp_disconnect() //because of AF_UNSPEC
	  |                                       - tcp_transmit_skb()// send RST
	  |                                    - return 0; // no reconnect!
	  |                           - sk_stream_wait_connect()
	  |                                 - sock_error()
	  |                                    - xchg(&sk->sk_err, 0)
	  |                                    - return -ECONNRESET
	- ... // wake up, see sk->sk_err == 0
    - skb_entail() on TCP_CLOSE socket

If the connection is reopened then we will send a brand new SYN packet
after thread A has already queued a buffer. At this point I think the
socket internal state (sequence numbers etc.) becomes messed up.

When the new connection is closed, the FIN-ACK is rejected because the
sequence number is outside the window. The other side tries to
retransmit,
but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which
corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Hence, this patch adds a check for AF_UNSPEC in the fastopen data path
and return EOPNOTSUPP to user if such case happens.

Fixes: cf60af03ca4e7 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1066,9 +1066,12 @@ static int tcp_sendmsg_fastopen(struct s
 				int *copied, size_t size)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct sockaddr *uaddr = msg->msg_name;
 	int err, flags;
 
-	if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE))
+	if (!(sysctl_tcp_fastopen & TFO_CLIENT_ENABLE) ||
+	    (uaddr && msg->msg_namelen >= sizeof(uaddr->sa_family) &&
+	     uaddr->sa_family == AF_UNSPEC))
 		return -EOPNOTSUPP;
 	if (tp->fastopen_req != NULL)
 		return -EALREADY; /* Another Fast Open is in progress */
@@ -1081,7 +1084,7 @@ static int tcp_sendmsg_fastopen(struct s
 	tp->fastopen_req->size = size;
 
 	flags = (msg->msg_flags & MSG_DONTWAIT) ? O_NONBLOCK : 0;
-	err = __inet_stream_connect(sk->sk_socket, msg->msg_name,
+	err = __inet_stream_connect(sk->sk_socket, uaddr,
 				    msg->msg_namelen, flags);
 	*copied = tp->fastopen_req->copied;
 	tcp_free_fastopen_req(tp);

[PATCH 3.18 16/33] sctp: fix ICMP processing if skb is non-linear

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Davide Caratti <dcaratti@redhat.com>


[ Upstream commit 804ec7ebe8ea003999ca8d1bfc499edc6a9e07df ]

sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since
  icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/input.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -472,15 +472,14 @@ struct sock *sctp_err_lookup(struct net
 			     struct sctp_association **app,
 			     struct sctp_transport **tpp)
 {
+	struct sctp_init_chunk *chunkhdr, _chunkhdr;
 	union sctp_addr saddr;
 	union sctp_addr daddr;
 	struct sctp_af *af;
 	struct sock *sk = NULL;
 	struct sctp_association *asoc;
 	struct sctp_transport *transport = NULL;
-	struct sctp_init_chunk *chunkhdr;
 	__u32 vtag = ntohl(sctphdr->vtag);
-	int len = skb->len - ((void *)sctphdr - (void *)skb->data);
 
 	*app = NULL; *tpp = NULL;
 
@@ -515,13 +514,16 @@ struct sock *sctp_err_lookup(struct net
 	 * discard the packet.
 	 */
 	if (vtag == 0) {
-		chunkhdr = (void *)sctphdr + sizeof(struct sctphdr);
-		if (len < sizeof(struct sctphdr) + sizeof(sctp_chunkhdr_t)
-			  + sizeof(__be32) ||
+		/* chunk header + first 4 octects of init header */
+		chunkhdr = skb_header_pointer(skb, skb_transport_offset(skb) +
+					      sizeof(struct sctphdr),
+					      sizeof(struct sctp_chunkhdr) +
+					      sizeof(__be32), &_chunkhdr);
+		if (!chunkhdr ||
 		    chunkhdr->chunk_hdr.type != SCTP_CID_INIT ||
-		    ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag) {
+		    ntohl(chunkhdr->init_hdr.init_tag) != asoc->c.my_vtag)
 			goto out;
-		}
+
 	} else if (vtag != asoc->c.peer_vtag) {
 		goto out;
 	}

[PATCH 3.18 17/33] i2c: i2c-tiny-usb: fix buffer not being DMA capable

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

commit 5165da5923d6c7df6f2927b0113b2e4d9288661e upstream.

Since v4.9 i2c-tiny-usb generates the below call trace
and longer works, since it can't communicate with the
USB device. The reason is, that since v4.9 the USB
stack checks, that the buffer it should transfer is DMA
capable. This was a requirement since v2.2 days, but it
usually worked nevertheless.

[   17.504959] ------------[ cut here ]------------
[   17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.506545] transfer buffer not dma capable
[   17.507022] Modules linked in:
[   17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10
[   17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   17.509039] Call Trace:
[   17.509320]  ? dump_stack+0x5c/0x78
[   17.509714]  ? __warn+0xbe/0xe0
[   17.510073]  ? warn_slowpath_fmt+0x5a/0x80
[   17.510532]  ? nommu_map_sg+0xb0/0xb0
[   17.510949]  ? usb_hcd_map_urb_for_dma+0x37c/0x570
[   17.511482]  ? usb_hcd_submit_urb+0x336/0xab0
[   17.511976]  ? wait_for_completion_timeout+0x12f/0x1a0
[   17.512549]  ? wait_for_completion_timeout+0x65/0x1a0
[   17.513125]  ? usb_start_wait_urb+0x65/0x160
[   17.513604]  ? usb_control_msg+0xdc/0x130
[   17.514061]  ? usb_xfer+0xa4/0x2a0
[   17.514445]  ? __i2c_transfer+0x108/0x3c0
[   17.514899]  ? i2c_transfer+0x57/0xb0
[   17.515310]  ? i2c_smbus_xfer_emulated+0x12f/0x590
[   17.515851]  ? _raw_spin_unlock_irqrestore+0x11/0x20
[   17.516408]  ? i2c_smbus_xfer+0x125/0x330
[   17.516876]  ? i2c_smbus_xfer+0x125/0x330
[   17.517329]  ? i2cdev_ioctl_smbus+0x1c1/0x2b0
[   17.517824]  ? i2cdev_ioctl+0x75/0x1c0
[   17.518248]  ? do_vfs_ioctl+0x9f/0x600
[   17.518671]  ? vfs_write+0x144/0x190
[   17.519078]  ? SyS_ioctl+0x74/0x80
[   17.519463]  ? entry_SYSCALL_64_fastpath+0x1e/0xad
[   17.519959] ---[ end trace d047c04982f5ac50 ]---

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-tiny-usb.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -178,22 +178,39 @@ static int usb_read(struct i2c_adapter *
 		    int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmalloc(len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_rcvctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
-			       USB_DIR_IN, value, index, data, len, 2000);
+			       USB_DIR_IN, value, index, dmadata, len, 2000);
+
+	memcpy(data, dmadata, len);
+	kfree(dmadata);
+	return ret;
 }
 
 static int usb_write(struct i2c_adapter *adapter, int cmd,
 		     int value, int index, void *data, int len)
 {
 	struct i2c_tiny_usb *dev = (struct i2c_tiny_usb *)adapter->algo_data;
+	void *dmadata = kmemdup(data, len, GFP_KERNEL);
+	int ret;
+
+	if (!dmadata)
+		return -ENOMEM;
 
 	/* do control transfer */
-	return usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
+	ret = usb_control_msg(dev->usb_dev, usb_sndctrlpipe(dev->usb_dev, 0),
 			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			       value, index, data, len, 2000);
+			       value, index, dmadata, len, 2000);
+
+	kfree(dmadata);
+	return ret;
 }
 
 static void i2c_tiny_usb_free(struct i2c_tiny_usb *dev)

[PATCH 3.18 19/33] pcmcia: remove left-over %Z format

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Iooss <nicolas.iooss_linux@m4x.org>

commit ff5a20169b98d84ad8d7f99f27c5ebbb008204d6 upstream.

Commit 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") removed some
usages of format %Z but forgot "%.2Zx".  This makes clang 4.0 reports a
-Wformat-extra-args warning because it does not know about %Z.

Replace %Z with %z.

Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Harald Welte <laforge@gnumonks.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/pcmcia/cm4040_cs.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -374,7 +374,7 @@ static ssize_t cm4040_write(struct file
 
 	rc = write_sync_reg(SCR_HOST_TO_READER_START, dev);
 	if (rc <= 0) {
-		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
 		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 		if (rc == -ERESTARTSYS)
 			return rc;
@@ -387,7 +387,7 @@ static ssize_t cm4040_write(struct file
 	for (i = 0; i < bytes_to_write; i++) {
 		rc = wait_for_bulk_out_ready(dev);
 		if (rc <= 0) {
-			DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2Zx\n",
+			DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2zx\n",
 			       rc);
 			DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 			if (rc == -ERESTARTSYS)
@@ -403,7 +403,7 @@ static ssize_t cm4040_write(struct file
 	rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev);
 
 	if (rc <= 0) {
-		DEBUGP(5, dev, "write_sync_reg c=%.2Zx\n", rc);
+		DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
 		DEBUGP(2, dev, "<- cm4040_write (failed)\n");
 		if (rc == -ERESTARTSYS)
 			return rc;

[PATCH 3.18 20/33] ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Tsoy <alexander@tsoy.me>

commit 1fc2e41f7af4572b07190f9dec28396b418e9a36 upstream.

This model is actually called 92XXM2-8 in Windows driver. But since pin
configs for M22 and M28 are identical, just reuse M22 quirk.

Fixes external microphone (tested) and probably docking station ports
(not tested).

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_sigmatel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1537,6 +1537,8 @@ static const struct snd_pci_quirk stac92
 		      "Dell Inspiron 1501", STAC_9200_DELL_M26),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f6,
 		      "unknown Dell", STAC_9200_DELL_M26),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0201,
+		      "Dell Latitude D430", STAC_9200_DELL_M22),
 	/* Panasonic */
 	SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_9200_PANASONIC),
 	/* Gateway machines needs EAPD to be set on resume */

[PATCH 3.18 21/33] slub/memcg: cure the brainless abuse of sysfs attributes

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 478fe3037b2278d276d4cd9cd0ab06c4cb2e9b32 upstream.

memcg_propagate_slab_attrs() abuses the sysfs attribute file functions
to propagate settings from the root kmem_cache to a newly created
kmem_cache.  It does that with:

     attr->show(root, buf);
     attr->store(new, buf, strlen(bug);

Aside of being a lazy and absurd hackery this is broken because it does
not check the return value of the show() function.

Some of the show() functions return 0 w/o touching the buffer.  That
means in such a case the store function is called with the stale content
of the previous show().  That causes nonsense like invoking
kmem_cache_shrink() on a newly created kmem_cache.  In the worst case it
would cause handing in an uninitialized buffer.

This should be rewritten proper by adding a propagate() callback to
those slub_attributes which must be propagated and avoid that insane
conversion to and from ASCII, but that's too large for a hot fix.

Check at least the return value of the show() function, so calling
store() with stale content is prevented.

Steven said:
 "It can cause a deadlock with get_online_cpus() that has been uncovered
  by recent cpu hotplug and lockdep changes that Thomas and Peter have
  been doing.

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(cpu_hotplug.lock);
                                   lock(slab_mutex);
                                   lock(cpu_hotplug.lock);
      lock(slab_mutex);

     *** DEADLOCK ***"

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/slub.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4959,6 +4959,7 @@ static void memcg_propagate_slab_attrs(s
 		char mbuf[64];
 		char *buf;
 		struct slab_attribute *attr = to_slab_attr(slab_attrs[i]);
+		ssize_t len;
 
 		if (!attr || !attr->store || !attr->show)
 			continue;
@@ -4983,8 +4984,9 @@ static void memcg_propagate_slab_attrs(s
 			buf = buffer;
 		}
 
-		attr->show(root_cache, buf);
-		attr->store(s, buf, strlen(buf));
+		len = attr->show(root_cache, buf);
+		if (len > 0)
+			attr->store(s, buf, len);
 	}
 
 	if (buffer)

[PATCH 3.18 22/33] drm/gma500/psb: Actually use VBT mode when it is found

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream.

With LVDS we were incorrectly picking the pre-programmed mode instead of
the prefered mode provided by VBT. Make sure we pick the VBT mode if
one is provided. It is likely that the mode read-out code is still wrong
but this patch fixes the immediate problem on most machines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/gma500/psb_intel_lvds.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

--- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
@@ -783,20 +783,23 @@ void psb_intel_lvds_init(struct drm_devi
 		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
 			mode_dev->panel_fixed_mode =
 			    drm_mode_duplicate(dev, scan);
+			DRM_DEBUG_KMS("Using mode from DDC\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}
 
 	/* Failed to get EDID, what about VBT? do we need this? */
-	if (mode_dev->vbt_mode)
+	if (dev_priv->lfp_lvds_vbt_mode) {
 		mode_dev->panel_fixed_mode =
-		    drm_mode_duplicate(dev, mode_dev->vbt_mode);
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
 
-	if (!mode_dev->panel_fixed_mode)
-		if (dev_priv->lfp_lvds_vbt_mode)
-			mode_dev->panel_fixed_mode =
-				drm_mode_duplicate(dev,
-					dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using mode from VBT\n");
+			goto out;
+		}
+	}
 
 	/*
 	 * If we didn't get EDID, try checking if the panel is already turned
@@ -813,6 +816,7 @@ void psb_intel_lvds_init(struct drm_devi
 		if (mode_dev->panel_fixed_mode) {
 			mode_dev->panel_fixed_mode->type |=
 			    DRM_MODE_TYPE_PREFERRED;
+			DRM_DEBUG_KMS("Using pre-programmed mode\n");
 			goto out;	/* FIXME: check for quirks */
 		}
 	}

[PATCH 3.18 23/33] mm/migrate: fix refcount handling when !hugepage_migration_supported()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Punit Agrawal <punit.agrawal@arm.com>

commit 30809f559a0d348c2dfd7ab05e9a451e2384962e upstream.

On failing to migrate a page, soft_offline_huge_page() performs the
necessary update to the hugepage ref-count.

But when !hugepage_migration_supported() , unmap_and_move_hugepage()
also decrements the page ref-count for the hugepage.  The combined
behaviour leaves the ref-count in an inconsistent state.

This leads to soft lockups when running the overcommitted hugepage test
from mce-tests suite.

  Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000
  soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head)
  INFO: rcu_preempt detected stalls on CPUs/tasks:
   Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715
    (detected by 7, t=5254 jiffies, g=963, c=962, q=321)
    thugetlb_overco R  running task        0  2715   2685 0x00000008
    Call trace:
      dump_backtrace+0x0/0x268
      show_stack+0x24/0x30
      sched_show_task+0x134/0x180
      rcu_print_detail_task_stall_rnp+0x54/0x7c
      rcu_check_callbacks+0xa74/0xb08
      update_process_times+0x34/0x60
      tick_sched_handle.isra.7+0x38/0x70
      tick_sched_timer+0x4c/0x98
      __hrtimer_run_queues+0xc0/0x300
      hrtimer_interrupt+0xac/0x228
      arch_timer_handler_phys+0x3c/0x50
      handle_percpu_devid_irq+0x8c/0x290
      generic_handle_irq+0x34/0x50
      __handle_domain_irq+0x68/0xc0
      gic_handle_irq+0x5c/0xb0

Address this by changing the putback_active_hugepage() in
soft_offline_huge_page() to putback_movable_pages().

This only triggers on systems that enable memory failure handling
(ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration
(!ARCH_ENABLE_HUGEPAGE_MIGRATION).

I imagine this wasn't triggered as there aren't many systems running
this configuration.

[akpm@linux-foundation.org: remove dead comment, per Naoya]
Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.com
Reported-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory-failure.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1570,12 +1570,8 @@ static int soft_offline_huge_page(struct
 	if (ret) {
 		pr_info("soft offline: %#lx: migration failed %d, type %lx\n",
 			pfn, ret, page->flags);
-		/*
-		 * We know that soft_offline_huge_page() tries to migrate
-		 * only one hugepage pointed to by hpage, so we need not
-		 * run through the pagelist here.
-		 */
-		putback_active_hugepage(hpage);
+		if (!list_empty(&pagelist))
+			putback_movable_pages(&pagelist);
 		if (ret > 0)
 			ret = -EIO;
 	} else {

[PATCH 3.18 24/33] mlock: fix mlock count can not decrease in race condition

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <xieyisheng1@huawei.com>

commit 70feee0e1ef331b22cc51f383d532a0d043fbdcc upstream.

Kefeng reported that when running the follow test, the mlock count in
meminfo will increase permanently:

 [1] testcase
 linux:~ # cat test_mlockal
 grep Mlocked /proc/meminfo
  for j in `seq 0 10`
  do
 	for i in `seq 4 15`
 	do
 		./p_mlockall >> log &
 	done
 	sleep 0.2
 done
 # wait some time to let mlock counter decrease and 5s may not enough
 sleep 5
 grep Mlocked /proc/meminfo

 linux:~ # cat p_mlockall.c
 #include <sys/mman.h>
 #include <stdlib.h>
 #include <stdio.h>

 #define SPACE_LEN	4096

 int main(int argc, char ** argv)
 {
	 	int ret;
	 	void *adr = malloc(SPACE_LEN);
	 	if (!adr)
	 		return -1;

	 	ret = mlockall(MCL_CURRENT | MCL_FUTURE);
	 	printf("mlcokall ret = %d\n", ret);

	 	ret = munlockall();
	 	printf("munlcokall ret = %d\n", ret);

	 	free(adr);
	 	return 0;
	 }

In __munlock_pagevec() we should decrement NR_MLOCK for each page where
we clear the PageMlocked flag.  Commit 1ebb7cc6a583 ("mm: munlock: batch
NR_MLOCK zone state updates") has introduced a bug where we don't
decrement NR_MLOCK for pages where we clear the flag, but fail to
isolate them from the lru list (e.g.  when the pages are on some other
cpu's percpu pagevec).  Since PageMlocked stays cleared, the NR_MLOCK
accounting gets permanently disrupted by this.

Fix it by counting the number of page whose PageMlock flag is cleared.

Fixes: 1ebb7cc6a583 (" mm: munlock: batch NR_MLOCK zone state updates")
Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joern Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mlock.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -333,7 +333,7 @@ static void __munlock_pagevec(struct pag
 {
 	int i;
 	int nr = pagevec_count(pvec);
-	int delta_munlocked;
+	int delta_munlocked = -nr;
 	struct pagevec pvec_putback;
 	int pgrescued = 0;
 
@@ -353,6 +353,8 @@ static void __munlock_pagevec(struct pag
 				continue;
 			else
 				__munlock_isolation_failed(page);
+		} else {
+			delta_munlocked++;
 		}
 
 		/*
@@ -364,7 +366,6 @@ static void __munlock_pagevec(struct pag
 		pagevec_add(&pvec_putback, pvec->pages[i]);
 		pvec->pages[i] = NULL;
 	}
-	delta_munlocked = -nr + pagevec_count(&pvec_putback);
 	__mod_zone_page_state(zone, NR_MLOCK, delta_munlocked);
 	spin_unlock_irq(&zone->lru_lock);
 

[PATCH 3.18 25/33] xfs: Fix missed holes in SEEK_HOLE implementation

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 5375023ae1266553a7baa0845e82917d8803f48c upstream.

XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as
can be seen by the following command:

xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"
       -c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec)
wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec)
Whence	Result
HOLE	139264

Where we can see that hole at offset 56k was just ignored by SEEK_HOLE
implementation. The bug is in xfs_find_get_desired_pgoff() which does
not properly detect the case when pages are not contiguous.

Fix the problem by properly detecting when found page has larger offset
than expected.

Fixes: d126d43f631f996daeee5006714fed914be32368
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_file.c |   29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1110,17 +1110,6 @@ xfs_find_get_desired_pgoff(
 			break;
 		}
 
-		/*
-		 * At lease we found one page.  If this is the first time we
-		 * step into the loop, and if the first page index offset is
-		 * greater than the given search offset, a hole was found.
-		 */
-		if (type == HOLE_OFF && lastoff == startoff &&
-		    lastoff < page_offset(pvec.pages[0])) {
-			found = true;
-			break;
-		}
-
 		for (i = 0; i < nr_pages; i++) {
 			struct page	*page = pvec.pages[i];
 			loff_t		b_offset;
@@ -1132,18 +1121,18 @@ xfs_find_get_desired_pgoff(
 			 * file mapping. However, page->index will not change
 			 * because we have a reference on the page.
 			 *
-			 * Searching done if the page index is out of range.
-			 * If the current offset is not reaches the end of
-			 * the specified search range, there should be a hole
-			 * between them.
+			 * If current page offset is beyond where we've ended,
+			 * we've found a hole.
 			 */
-			if (page->index > end) {
-				if (type == HOLE_OFF && lastoff < endoff) {
-					*offset = lastoff;
-					found = true;
-				}
+			if (type == HOLE_OFF && lastoff < endoff &&
+			    lastoff < page_offset(pvec.pages[i])) {
+				found = true;
+				*offset = lastoff;
 				goto out;
 			}
+			/* Searching done if the page index is out of range. */
+			if (page->index > end)
+				goto out;
 
 			lock_page(page);
 			/*

[PATCH 3.18 26/33] xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eryu Guan <eguan@redhat.com>

commit 8affebe16d79ebefb1d9d6d56a46dc89716f9453 upstream.

xfs_find_get_desired_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.

When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size XFS on x86_64 host.

  # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
  	    -c "seek -d 0" /mnt/xfs/testfile
  wrote 1024/1024 bytes at offset 2048
  1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec)
  Whence  Result
  DATA    EOF

Data at offset 2k was missed, and lseek(2) returned ENXIO.

This is uncovered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.

Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -1083,7 +1083,7 @@ xfs_find_get_desired_pgoff(
 		unsigned	nr_pages;
 		unsigned int	i;
 
-		want = min_t(pgoff_t, end - index, PAGEVEC_SIZE);
+		want = min_t(pgoff_t, end - index, PAGEVEC_SIZE - 1) + 1;
 		nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index,
 					  want);
 		/*

[PATCH 3.18 27/33] xfs: fix over-copying of getbmap parameters from userspace

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong <darrick.wong@oracle.com>

commit be6324c00c4d1e0e665f03ed1fc18863a88da119 upstream.

In xfs_ioc_getbmap, we should only copy the fields of struct getbmap
from userspace, or else we end up copying random stack contents into the
kernel.  struct getbmap is a strict subset of getbmapx, so a partial
structure copy should work fine.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_ioctl.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -1378,10 +1378,11 @@ xfs_ioc_getbmap(
 	unsigned int		cmd,
 	void			__user *arg)
 {
-	struct getbmapx		bmx;
+	struct getbmapx		bmx = { 0 };
 	int			error;
 
-	if (copy_from_user(&bmx, arg, sizeof(struct getbmapx)))
+	/* struct getbmap is a strict subset of struct getbmapx. */
+	if (copy_from_user(&bmx, arg, offsetof(struct getbmapx, bmv_iflags)))
 		return -EFAULT;
 
 	if (bmx.bmv_count < 2)

[PATCH 3.18 28/33] xfs: handle array index overrun in xfs_dir2_leaf_readbuf()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@redhat.com>

commit 023cc840b40fad95c6fe26fff1d380a8c9d45939 upstream.

Carlos had a case where "find" seemed to start spinning
forever and never return.

This was on a filesystem with non-default multi-fsb (8k)
directory blocks, and a fragmented directory with extents
like this:

0:[0,133646,2,0]
1:[2,195888,1,0]
2:[3,195890,1,0]
3:[4,195892,1,0]
4:[5,195894,1,0]
5:[6,195896,1,0]
6:[7,195898,1,0]
7:[8,195900,1,0]
8:[9,195902,1,0]
9:[10,195908,1,0]
10:[11,195910,1,0]
11:[12,195912,1,0]
12:[13,195914,1,0]
...

i.e. the first extent is a contiguous 2-fsb dir block, but
after that it is fragmented into 1 block extents.

At the top of the readdir path, we allocate a mapping array
which (for this filesystem geometry) can hold 10 extents; see
the assignment to map_info->map_size.  During readdir, we are
therefore able to map extents 0 through 9 above into the array
for readahead purposes.  If we count by 2, we see that the last
mapped index (9) is the first block of a 2-fsb directory block.

At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill
more readahead; the outer loop assumes one full dir block is
processed each loop iteration, and an inner loop that ensures
that this is so by advancing to the next extent until a full
directory block is mapped.

The problem is that this inner loop may step past the last
extent in the mapping array as it tries to reach the end of
the directory block.  This will read garbage for the extent
length, and as a result the loop control variable 'j' may
become corrupted and never fail the loop conditional.

The number of valid mappings we have in our array is stored
in map->map_valid, so stop this inner loop based on that limit.

There is an ASSERT at the top of the outer loop for this
same condition, but we never made it out of the inner loop,
so the ASSERT never fired.

Huge appreciation for Carlos for debugging and isolating
the problem.

Debugged-and-analyzed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_dir2_readdir.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/xfs/xfs_dir2_readdir.c
+++ b/fs/xfs/xfs_dir2_readdir.c
@@ -422,6 +422,7 @@ xfs_dir2_leaf_readbuf(
 
 	/*
 	 * Do we need more readahead?
+	 * Each loop tries to process 1 full dir blk; last may be partial.
 	 */
 	blk_start_plug(&plug);
 	for (mip->ra_index = mip->ra_offset = i = 0;
@@ -453,9 +454,14 @@ xfs_dir2_leaf_readbuf(
 		}
 
 		/*
-		 * Advance offset through the mapping table.
+		 * Advance offset through the mapping table, processing a full
+		 * dir block even if it is fragmented into several extents.
+		 * But stop if we have consumed all valid mappings, even if
+		 * it's not yet a full directory block.
 		 */
-		for (j = 0; j < geo->fsbcount; j += length ) {
+		for (j = 0;
+		     j < geo->fsbcount && mip->ra_index < mip->map_valid;
+		     j += length ) {
 			/*
 			 * The rest of this extent but not more than a dir
 			 * block.

[PATCH 3.18 29/33] xfs: prevent multi-fsb dir readahead from reading random blocks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Foster <bfoster@redhat.com>

commit cb52ee334a45ae6c78a3999e4b473c43ddc528f4 upstream.

Directory block readahead uses a complex iteration mechanism to map
between high-level directory blocks and underlying physical extents.
This mechanism attempts to traverse the higher-level dir blocks in a
manner that handles multi-fsb directory blocks and simultaneously
maintains a reference to the corresponding physical blocks.

This logic doesn't handle certain (discontiguous) physical extent
layouts correctly with multi-fsb directory blocks. For example,
consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory
block size and a directory with the following extent layout:

 EXT: FILE-OFFSET      BLOCK-RANGE      AG AG-OFFSET        TOTAL
   0: [0..7]:          88..95            0 (88..95)             8
   1: [8..15]:         80..87            0 (80..87)             8
   2: [16..39]:        168..191          0 (168..191)          24
   3: [40..63]:        5242952..5242975  1 (72..95)            24

Directory block 0 spans physical extents 0 and 1, dirblk 1 lies
entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because
extent 2 is larger than the directory block size, the readahead code
erroneously assumes the block is contiguous and issues a readahead
based on the physical mapping of the first fsb of the dirblk. This
results in read verifier failure and a spurious corruption or crc
failure, depending on the filesystem format.

Further, the subsequent readahead code responsible for walking
through the physical table doesn't correctly advance the physical
block reference for dirblk 2. Instead of advancing two physical
filesystem blocks, the first iteration of the loop advances 1 block
(correctly), but the subsequent iteration advances 2 more physical
blocks because the next physical extent (extent 3, above) happens to
cover more than dirblk 2. At this point, the higher-level directory
block walking is completely off the rails of the actual physical
layout of the directory for the respective mapping table.

Update the contiguous dirblock logic to consider the current offset
in the physical extent to avoid issuing directory readahead to
unrelated blocks. Also, update the mapping table advancing code to
consider the current offset within the current dirblock to avoid
advancing the mapping reference too far beyond the dirblock.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_dir2_readdir.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/xfs/xfs_dir2_readdir.c
+++ b/fs/xfs/xfs_dir2_readdir.c
@@ -433,7 +433,8 @@ xfs_dir2_leaf_readbuf(
 		 * Read-ahead a contiguous directory block.
 		 */
 		if (i > mip->ra_current &&
-		    map[mip->ra_index].br_blockcount >= geo->fsbcount) {
+		    (map[mip->ra_index].br_blockcount - mip->ra_offset) >=
+		    geo->fsbcount) {
 			xfs_dir3_data_readahead(dp,
 				map[mip->ra_index].br_startoff + mip->ra_offset,
 				XFS_FSB_TO_DADDR(dp->i_mount,
@@ -466,7 +467,7 @@ xfs_dir2_leaf_readbuf(
 			 * The rest of this extent but not more than a dir
 			 * block.
 			 */
-			length = min_t(int, geo->fsbcount,
+			length = min_t(int, geo->fsbcount - j,
 					map[mip->ra_index].br_blockcount -
 							mip->ra_offset);
 			mip->ra_offset += length;

[PATCH 3.18 30/33] xfs: fix up quotacheck buffer list error handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Foster <bfoster@redhat.com>

commit 20e8a063786050083fe05b4f45be338c60b49126 upstream.

The quotacheck error handling of the delwri buffer list assumes the
resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag
on the buffers that are dequeued. This can lead to assert failures
on buffer release and possibly other locking problems.

Move this code to a delwri queue cancel helper function to
encapsulate the logic required to properly release buffers from a
delwri queue. Update the helper to clear the delwri queue flag and
call it from quotacheck.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_buf.c |   24 ++++++++++++++++++++++++
 fs/xfs/xfs_buf.h |    1 +
 fs/xfs/xfs_qm.c  |    7 +------
 3 files changed, 26 insertions(+), 6 deletions(-)

--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -982,6 +982,8 @@ void
 xfs_buf_unlock(
 	struct xfs_buf		*bp)
 {
+	ASSERT(xfs_buf_islocked(bp));
+
 	XB_CLEAR_OWNER(bp);
 	up(&bp->b_sema);
 
@@ -1698,6 +1700,28 @@ error:
 }
 
 /*
+ * Cancel a delayed write list.
+ *
+ * Remove each buffer from the list, clear the delwri queue flag and drop the
+ * associated buffer reference.
+ */
+void
+xfs_buf_delwri_cancel(
+	struct list_head	*list)
+{
+	struct xfs_buf		*bp;
+
+	while (!list_empty(list)) {
+		bp = list_first_entry(list, struct xfs_buf, b_list);
+
+		xfs_buf_lock(bp);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
+		list_del_init(&bp->b_list);
+		xfs_buf_relse(bp);
+	}
+}
+
+/*
  * Add a buffer to the delayed write list.
  *
  * This queues a buffer for writeout if it hasn't already been.  Note that
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -302,6 +302,7 @@ extern void xfs_buf_iomove(xfs_buf_t *,
 extern xfs_caddr_t xfs_buf_offset(xfs_buf_t *, size_t);
 
 /* Delayed Write Buffer Routines */
+extern void xfs_buf_delwri_cancel(struct list_head *);
 extern bool xfs_buf_delwri_queue(struct xfs_buf *, struct list_head *);
 extern int xfs_buf_delwri_submit(struct list_head *);
 extern int xfs_buf_delwri_submit_nowait(struct list_head *);
--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -1359,12 +1359,7 @@ xfs_qm_quotacheck(
 	mp->m_qflags |= flags;
 
  error_return:
-	while (!list_empty(&buffer_list)) {
-		struct xfs_buf *bp =
-			list_first_entry(&buffer_list, struct xfs_buf, b_list);
-		list_del_init(&bp->b_list);
-		xfs_buf_relse(bp);
-	}
+	xfs_buf_delwri_cancel(&buffer_list);
 
 	if (error) {
 		xfs_warn(mp,

[PATCH 3.18 31/33] xfs: fix indlen accounting error on partial delalloc conversion

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Foster <bfoster@redhat.com>

commit 0daaecacb83bc6b656a56393ab77a31c28139bc7 upstream.

The delalloc -> real block conversion path uses an incorrect
calculation in the case where the middle part of a delalloc extent
is being converted. This is documented as a rare situation because
XFS generally attempts to maximize contiguity by converting as much
of a delalloc extent as possible.

If this situation does occur, the indlen reservation for the two new
delalloc extents left behind by the conversion of the middle range
is calculated and compared with the original reservation. If more
blocks are required, the delta is allocated from the global block
pool. This delta value can be characterized as the difference
between the new total requirement (temp + temp2) and the currently
available reservation minus those blocks that have already been
allocated (startblockval(PREV.br_startblock) - allocated).

The problem is that the current code does not account for previously
allocated blocks correctly. It subtracts the current allocation
count from the (new - old) delta rather than the old indlen
reservation. This means that more indlen blocks than have been
allocated end up stashed in the remaining extents and free space
accounting is broken as a result.

Fix up the calculation to subtract the allocated block count from
the original extent indlen and thus correctly allocate the
reservation delta based on the difference between the new total
requirement and the unused blocks from the original reservation.
Also remove a bogus assert that contradicts the fact that the new
indlen reservation can be larger than the original indlen
reservation.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/libxfs/xfs_bmap.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -2214,8 +2214,10 @@ xfs_bmap_add_extent_delay_real(
 		}
 		temp = xfs_bmap_worst_indlen(bma->ip, temp);
 		temp2 = xfs_bmap_worst_indlen(bma->ip, temp2);
-		diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
-			(bma->cur ? bma->cur->bc_private.b.allocated : 0));
+		diff = (int)(temp + temp2 -
+			     (startblockval(PREV.br_startblock) -
+			      (bma->cur ?
+			       bma->cur->bc_private.b.allocated : 0)));
 		if (diff > 0) {
 			error = xfs_icsb_modify_counters(bma->ip->i_mount,
 					XFS_SBS_FDBLOCKS,
@@ -2268,7 +2270,6 @@ xfs_bmap_add_extent_delay_real(
 		temp = da_new;
 		if (bma->cur)
 			temp += bma->cur->bc_private.b.allocated;
-		ASSERT(temp <= da_old);
 		if (temp < da_old)
 			xfs_icsb_modify_counters(bma->ip->i_mount,
 					XFS_SBS_FDBLOCKS,

[PATCH 3.18 32/33] xfs: bad assertion for delalloc an extent that start at i_size

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zorro Lang <zlang@redhat.com>

commit 892d2a5f705723b2cb488bfb38bcbdcf83273184 upstream.

By run fsstress long enough time enough in RHEL-7, I find an
assertion failure (harder to reproduce on linux-4.11, but problem
is still there):

  XFS: Assertion failed: (iflags & BMV_IF_DELALLOC) != 0, file: fs/xfs/xfs_bmap_util.c

The assertion is in xfs_getbmap() funciton:

  if (map[i].br_startblock == DELAYSTARTBLOCK &&
-->   map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
          ASSERT((iflags & BMV_IF_DELALLOC) != 0);

When map[i].br_startoff == XFS_B_TO_FSB(mp, XFS_ISIZE(ip)), the
startoff is just at EOF. But we only need to make sure delalloc
extents that are within EOF, not include EOF.

Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_bmap_util.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -659,7 +659,7 @@ xfs_getbmap(
 			 * extents.
 			 */
 			if (map[i].br_startblock == DELAYSTARTBLOCK &&
-			    map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
+			    map[i].br_startoff < XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
 				ASSERT((iflags & BMV_IF_DELALLOC) != 0);
 
                         if (map[i].br_startblock == HOLESTARTBLOCK &&

[PATCH 3.18 33/33] xfs: fix unaligned access in xfs_btree_visit_blocks

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@sandeen.net>

commit a4d768e702de224cc85e0c8eac9311763403b368 upstream.

This structure copy was throwing unaligned access warnings on sparc64:

Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs]

xfs_btree_copy_ptrs does a memcpy, which avoids it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/libxfs/xfs_btree.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xfs/libxfs/xfs_btree.c
+++ b/fs/xfs/libxfs/xfs_btree.c
@@ -4051,7 +4051,7 @@ xfs_btree_change_owner(
 			xfs_btree_readahead_ptr(cur, ptr, 1);
 
 			/* save for the next iteration of the loop */
-			lptr = *ptr;
+			xfs_btree_copy_ptrs(cur, &lptr, ptr, 1);
 		}
 
 		/* for each buffer in the level */

Re: [PATCH 3.18 01/33] Revert "stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms"

[Kees Cook]

On Mon, Jun 5, 2017 at 9:16 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> 3.18-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> This reverts commit 609a3e81550b0b4ea87197b0f59455a7bcff975a which is
> commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.
>
> It shouldn't have been backported to 3.18, as we do not have
> get_random_long() in that kernel tree.

It should be possible to trivially backport
ec9ee4acd97c0039a61c0ae4f12705767ae62153 to gain get_random_long().

-Kees

>
> Reported-by: Philip Müller <philm@manjaro.org>
> Cc: Daniel Micay <danielmicay@gmail.com>
> Cc: Arjan van de Ven <arjan@linux.intel.com>
> Cc: Rik van Riel <riel@redhat.com>
> Cc: Kees Cook <keescook@chromium.org>
> Cc: Arjan van Ven <arjan@linux.intel.com>
> Cc: Linus Torvalds <torvalds@linux-foundation.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: kernel-hardening@lists.openwall.com
> Cc: Ingo Molnar <mingo@kernel.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
>  kernel/fork.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/kernel/fork.c
> +++ b/kernel/fork.c
> @@ -338,7 +338,7 @@ static struct task_struct *dup_task_stru
>         set_task_stack_end_magic(tsk);
>
>  #ifdef CONFIG_CC_STACKPROTECTOR
> -       tsk->stack_canary = get_random_long();
> +       tsk->stack_canary = get_random_int();
>  #endif
>
>         /*
>
>



-- 
Kees Cook
Pixel Security

Re: [kernel-hardening] Re: [PATCH 3.18 01/33] Revert "stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms"

[Eric Biggers]

On Mon, Jun 05, 2017 at 12:13:11PM -0700, Kees Cook wrote:
> On Mon, Jun 5, 2017 at 9:16 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > 3.18-stable review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > This reverts commit 609a3e81550b0b4ea87197b0f59455a7bcff975a which is
> > commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.
> >
> > It shouldn't have been backported to 3.18, as we do not have
> > get_random_long() in that kernel tree.
> 
> It should be possible to trivially backport
> ec9ee4acd97c0039a61c0ae4f12705767ae62153 to gain get_random_long().
> 
> -Kees

If that's done it may be a good idea to take
b1132deac01c2332d234fa821a70022796b79182 as well, which fixed an alignment bug
in get_random_long().

Eric

Re: [kernel-hardening] Re: [PATCH 3.18 01/33] Revert "stackprotector: Increase the per-task stack canarys random range from 32 bits to 64 bits on 64-bit platforms"

[Greg Kroah-Hartman]

On Mon, Jun 05, 2017 at 01:06:52PM -0700, Eric Biggers wrote:
> On Mon, Jun 05, 2017 at 12:13:11PM -0700, Kees Cook wrote:
> > On Mon, Jun 5, 2017 at 9:16 AM, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> > > 3.18-stable review patch.  If anyone has any objections, please let me know.
> > >
> > > ------------------
> > >
> > > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > >
> > > This reverts commit 609a3e81550b0b4ea87197b0f59455a7bcff975a which is
> > > commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.
> > >
> > > It shouldn't have been backported to 3.18, as we do not have
> > > get_random_long() in that kernel tree.
> > 
> > It should be possible to trivially backport
> > ec9ee4acd97c0039a61c0ae4f12705767ae62153 to gain get_random_long().
> > 
> > -Kees
> 
> If that's done it may be a good idea to take
> b1132deac01c2332d234fa821a70022796b79182 as well, which fixed an alignment bug
> in get_random_long().

Good idea for both of these, I'll do that in the next round of releases.

thanks,

greg k-h

Re: [PATCH 3.18 00/33] 3.18.56-stable review

[Shuah Khan]

On 06/05/2017 10:16 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.56 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Jun  7 15:30:04 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.56-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 


Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 3.18 00/33] 3.18.56-stable review

[Guenter Roeck]

On Mon, Jun 05, 2017 at 06:16:53PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.56 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Jun  7 15:30:04 UTC 2017.
> Anything received after that time might be too late.
> 

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 111 pass: 111 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 3.18 00/33] 3.18.56-stable review

[Greg Kroah-Hartman]

On Mon, Jun 05, 2017 at 02:01:06PM -0700, kernelci.org bot wrote:
> stable-rc/linux-3.18.y boot: 64 boots: 1 failed, 63 passed (v3.18.55-34-g975c7a9adc27)
> 
> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-3.18.y/kernel/v3.18.55-34-g975c7a9adc27/
> Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-3.18.y/kernel/v3.18.55-34-g975c7a9adc27/
> 
> Tree: stable-rc
> Branch: linux-3.18.y
> Git Describe: v3.18.55-34-g975c7a9adc27
> Git Commit: 975c7a9adc2785c43f2d3fc77810678dde72be9e
> Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Tested: 11 unique boards, 5 SoC families, 12 builds out of 204
> 
> Boot Failure Detected:
> 
> arm:
> 
>     at91_dt_defconfig
>         at91sam9261ek: 1 failed lab

I'm guessing this is ok?

Anyway, thanks for testing all of these, but the number of boots seems
really low, is that expected at the moment?

thanks,

greg k-h

> 
> ---
> For more info write to <info@kernelci.org>

Re: [PATCH 3.18 00/33] 3.18.56-stable review

[Kevin Hilman]

Greg Kroah-Hartman <gregkh@linuxfoundation.org> writes:

> On Mon, Jun 05, 2017 at 02:01:06PM -0700, kernelci.org bot wrote:
>> stable-rc/linux-3.18.y boot: 64 boots: 1 failed, 63 passed (v3.18.55-34-g975c7a9adc27)
>> 
>> Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-3.18.y/kernel/v3.18.55-34-g975c7a9adc27/
>> Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-3.18.y/kernel/v3.18.55-34-g975c7a9adc27/
>> 
>> Tree: stable-rc
>> Branch: linux-3.18.y
>> Git Describe: v3.18.55-34-g975c7a9adc27
>> Git Commit: 975c7a9adc2785c43f2d3fc77810678dde72be9e
>> Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> Tested: 11 unique boards, 5 SoC families, 12 builds out of 204
>> 
>> Boot Failure Detected:
>> 
>> arm:
>> 
>>     at91_dt_defconfig
>>         at91sam9261ek: 1 failed lab
>
> I'm guessing this is ok?

Yes, it's OK.  After discussions with at91 maintainers, this platform
was known broken in v3.18, so we need to blacklist.

> Anyway, thanks for testing all of these, but the number of boots seems
> really low, is that expected at the moment?

It's really low because my lab, which has the most boards, has been
offline due to some equipment failure, and it's taking me some time to
get things back online due to lack of time.

Some results for mainline should start trickling in today, and then I'll
see about enabling stable trees.

Kevin