* [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T
@ 2017-06-18 13:00 Ziping Chen
2017-06-18 13:00 ` [PATCH 2/3] ARM: dts: sunxi: add MMC " Ziping Chen
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Ziping Chen @ 2017-06-18 13:00 UTC (permalink / raw)
To: maxime.ripard, wens, robh+dt, mark.rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi, Ziping Chen
From: Ziping Chen <techping.chan@gmail.com>
The Allwinner A83T's R_LRADC is similiar with the
Allwinner A10's LRADC, they can use the same driver.
Add support for it.
Signed-off-by: Ziping Chen <techping.chan@gmail.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 8923ba625b76..ecc75bf6780e 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -301,5 +301,12 @@
interrupt-controller;
#interrupt-cells = <3>;
};
+
+ r_lradc: lradc@01f03c00 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01f03c00 0x100>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
};
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/3] ARM: dts: sunxi: add MMC support for A83T
2017-06-18 13:00 [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Ziping Chen
@ 2017-06-18 13:00 ` Ziping Chen
2017-06-20 9:49 ` Maxime Ripard
2017-06-18 13:00 ` [PATCH 3/3] ARM: dts: sunxi: Add support for Sinlinx SinA83T board Ziping Chen
2017-06-20 8:57 ` [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Maxime Ripard
2 siblings, 1 reply; 5+ messages in thread
From: Ziping Chen @ 2017-06-18 13:00 UTC (permalink / raw)
To: maxime.ripard, wens, robh+dt, mark.rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi, Ziping Chen
From: Ziping Chen <techping.chan@gmail.com>
The Allwinner A83T's MMC can work with
compatible "allwinner,sun7i-a20-mmc".
Add support for it.
Signed-off-by: Ziping Chen <techping.chan@gmail.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 69 +++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index ecc75bf6780e..b39425900bdb 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -45,6 +45,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -180,6 +182,63 @@
#dma-cells = <1>;
};
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ reg = <0x01c0f000 0x1000>;
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ reg = <0x01c10000 0x1000>;
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun7i-a20-mmc";
+ clocks = <&ccu CLK_BUS_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ reg = <0x01c11000 0x1000>;
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-a83t-ccu";
reg = <0x01c20000 0x400>;
@@ -210,6 +269,16 @@
bias-pull-up;
};
+ mmc2_8bit_pins: mmc2_8bit {
+ pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
spdif_tx_pin: spdif-tx-pin {
pins = "PE18";
function = "spdif";
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/3] ARM: dts: sunxi: Add support for Sinlinx SinA83T board
2017-06-18 13:00 [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Ziping Chen
2017-06-18 13:00 ` [PATCH 2/3] ARM: dts: sunxi: add MMC " Ziping Chen
@ 2017-06-18 13:00 ` Ziping Chen
2017-06-20 8:57 ` [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Maxime Ripard
2 siblings, 0 replies; 5+ messages in thread
From: Ziping Chen @ 2017-06-18 13:00 UTC (permalink / raw)
To: maxime.ripard, wens, robh+dt, mark.rutland
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-sunxi, Ziping Chen
From: Ziping Chen <techping.chan@gmail.com>
The Sinlinx SinA83T is an A83T core/daughter borad combo
from Sinlinx.
The board's wiki page: http://linux-sunxi.org/Sinlinx_SinA83T
Add support for it.
Signed-off-by: Ziping Chen <techping.chan@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-a83t-sinlinx-sina83t.dts | 151 +++++++++++++++++++++++
2 files changed, 152 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-a83t-sinlinx-sina83t.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e81d87db22cc..77e2efe1068f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -899,6 +899,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-sinlinx-sina83t.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-beelink-x2.dtb \
diff --git a/arch/arm/boot/dts/sun8i-a83t-sinlinx-sina83t.dts b/arch/arm/boot/dts/sun8i-a83t-sinlinx-sina83t.dts
new file mode 100644
index 000000000000..4a059422f820
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-sinlinx-sina83t.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2017 Ziping Chen
+ * Ziping Chen <techping.chan@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Sinlinx SinA83T";
+ compatible = "sinlinx,sina83t", "allwinner,sun8i-a83t";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usr_led {
+ label = "sinlinx:blue:usr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc1v8: vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&r_lradc {
+ vref-supply = <®_vcc1v8>;
+ status = "okay";
+
+ button@0 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <171428>;
+ };
+
+ button@1 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <342857>;
+ };
+
+ button@2 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <514285>;
+ };
+
+ button@3 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <647619>;
+ };
+
+ button@4 {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ channel = <0>;
+ voltage = <780952>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&mmc2_8bit_pins {
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
--
2.11.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T
2017-06-18 13:00 [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Ziping Chen
2017-06-18 13:00 ` [PATCH 2/3] ARM: dts: sunxi: add MMC " Ziping Chen
2017-06-18 13:00 ` [PATCH 3/3] ARM: dts: sunxi: Add support for Sinlinx SinA83T board Ziping Chen
@ 2017-06-20 8:57 ` Maxime Ripard
2 siblings, 0 replies; 5+ messages in thread
From: Maxime Ripard @ 2017-06-20 8:57 UTC (permalink / raw)
To: Ziping Chen
Cc: wens, robh+dt, mark.rutland, devicetree, linux-arm-kernel,
linux-kernel, linux-sunxi
[-- Attachment #1: Type: text/plain, Size: 1013 bytes --]
On Sun, Jun 18, 2017 at 09:00:16PM +0800, Ziping Chen wrote:
> From: Ziping Chen <techping.chan@gmail.com>
>
> The Allwinner A83T's R_LRADC is similiar with the
> Allwinner A10's LRADC, they can use the same driver.
There's a typo in similar above.
> Add support for it.
>
> Signed-off-by: Ziping Chen <techping.chan@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 8923ba625b76..ecc75bf6780e 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -301,5 +301,12 @@
> interrupt-controller;
> #interrupt-cells = <3>;
> };
> +
> + r_lradc: lradc@01f03c00 {
> + compatible = "allwinner,sun4i-a10-lradc-keys";
Could you add an A83T specific compatible here?
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] ARM: dts: sunxi: add MMC support for A83T
2017-06-18 13:00 ` [PATCH 2/3] ARM: dts: sunxi: add MMC " Ziping Chen
@ 2017-06-20 9:49 ` Maxime Ripard
0 siblings, 0 replies; 5+ messages in thread
From: Maxime Ripard @ 2017-06-20 9:49 UTC (permalink / raw)
To: Ziping Chen
Cc: wens, robh+dt, mark.rutland, devicetree, linux-arm-kernel,
linux-kernel, linux-sunxi
[-- Attachment #1: Type: text/plain, Size: 435 bytes --]
Hi,
On Sun, Jun 18, 2017 at 09:00:17PM +0800, Ziping Chen wrote:
> From: Ziping Chen <techping.chan@gmail.com>
>
> The Allwinner A83T's MMC can work with
> compatible "allwinner,sun7i-a20-mmc".
>
> Add support for it.
This has been proven not to be the case already.
Please use an A83T compatible only.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-20 9:49 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-18 13:00 [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Ziping Chen
2017-06-18 13:00 ` [PATCH 2/3] ARM: dts: sunxi: add MMC " Ziping Chen
2017-06-20 9:49 ` Maxime Ripard
2017-06-18 13:00 ` [PATCH 3/3] ARM: dts: sunxi: Add support for Sinlinx SinA83T board Ziping Chen
2017-06-20 8:57 ` [PATCH 1/3] ARM: dts: sunxi: add R_LRADC support for A83T Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).