* [PATCH v2 0/3] Fix SMC layout register for sama5d2
@ 2017-07-18 13:22 Ludovic Desroches
2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Ludovic Desroches @ 2017-07-18 13:22 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-mtd
Cc: linux-kernel, lee.jones, nicolas.ferre, alexandre.belloni,
boris.brezillon, computersforpeace, romain.izard.pro,
Ludovic Desroches
Hi,
The offset of some registers of the SMC is different between sama5d3/sama5d4
and sama5d2. An helper function has been added to retrieve the correct layout
with the help of a new compatible string for sama5d2. The atmel-ebi device will
store the register layout to allow the nand controller to setup correctly the
data interface.
Changes:
- v2: rebase patches on top of v4.13-rc1 and collect acked-by
Ludovic Desroches (3):
mfd: syscon: update Atmel SMC binding doc
mfd: syscon: atmel-smc: add helper to retrieve register layout
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
.../devicetree/bindings/mfd/atmel-smc.txt | 1 +
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
drivers/memory/atmel-ebi.c | 13 +++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++-----
drivers/mtd/nand/atmel/nand-controller.c | 10 +++-
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++---
6 files changed, 94 insertions(+), 31 deletions(-)
--
2.12.2
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc 2017-07-18 13:22 [PATCH v2 0/3] Fix SMC layout register for sama5d2 Ludovic Desroches @ 2017-07-18 13:22 ` Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre ` (2 more replies) 2017-07-18 13:22 ` [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout Ludovic Desroches 2017-07-18 13:22 ` [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC Ludovic Desroches 2 siblings, 3 replies; 12+ messages in thread From: Ludovic Desroches @ 2017-07-18 13:22 UTC (permalink / raw) To: devicetree, linux-arm-kernel, linux-mtd Cc: linux-kernel, lee.jones, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro, Ludovic Desroches A new compatible string is introduced for SMC on sama5d2 to manage a different layout of the registers. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt index 26eeed373934..1103ce2030fb 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be one of the following "atmel,at91sam9260-smc", "syscon" "atmel,sama5d3-smc", "syscon" + "atmel,sama5d2-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. -- 2.12.2 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches @ 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:40 ` Lee Jones 2017-08-07 15:41 ` Lee Jones 2 siblings, 0 replies; 12+ messages in thread From: Nicolas Ferre @ 2017-07-18 13:39 UTC (permalink / raw) To: Ludovic Desroches, devicetree, linux-arm-kernel, linux-mtd Cc: linux-kernel, lee.jones, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro On 18/07/2017 at 15:22, Ludovic Desroches wrote: > A new compatible string is introduced for SMC on sama5d2 to manage a > different layout of the registers. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Acked-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > --- > Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt > index 26eeed373934..1103ce2030fb 100644 > --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt > +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt > @@ -8,6 +8,7 @@ Required properties: > - compatible: Should be one of the following > "atmel,at91sam9260-smc", "syscon" > "atmel,sama5d3-smc", "syscon" > + "atmel,sama5d2-smc", "syscon" > - reg: Contains offset/length value of the SMC memory > region. > > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre @ 2017-08-07 15:40 ` Lee Jones 2017-08-07 15:41 ` Lee Jones 2 siblings, 0 replies; 12+ messages in thread From: Lee Jones @ 2017-08-07 15:40 UTC (permalink / raw) To: Ludovic Desroches Cc: devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro On Tue, 18 Jul 2017, Ludovic Desroches wrote: > A new compatible string is introduced for SMC on sama5d2 to manage a > different layout of the registers. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 + > 1 file changed, 1 insertion(+) Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt > index 26eeed373934..1103ce2030fb 100644 > --- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt > +++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt > @@ -8,6 +8,7 @@ Required properties: > - compatible: Should be one of the following > "atmel,at91sam9260-smc", "syscon" > "atmel,sama5d3-smc", "syscon" > + "atmel,sama5d2-smc", "syscon" > - reg: Contains offset/length value of the SMC memory > region. > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:40 ` Lee Jones @ 2017-08-07 15:41 ` Lee Jones 2 siblings, 0 replies; 12+ messages in thread From: Lee Jones @ 2017-08-07 15:41 UTC (permalink / raw) To: Ludovic Desroches Cc: devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro Enjoy! The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877: Linux v4.13-rc1 (2017-07-15 15:22:10 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-arm-v4.14 for you to fetch changes up to 5df46ec0f4cf3b2cb0791abe5c68821a4f7ffffe: ARM: dts: at91: sama5d2: Use sama5d2 compatible string for SMC (2017-08-07 16:38:30 +0100) ---------------------------------------------------------------- Immutable branch between MFD and ARM due for the v4.14 merge window ---------------------------------------------------------------- Ludovic Desroches (3): mfd: syscon: Update Atmel SMC binding doc mfd: syscon: atmel-smc: Add helper to retrieve register layout ARM: dts: at91: sama5d2: Use sama5d2 compatible string for SMC .../devicetree/bindings/mfd/atmel-smc.txt | 1 + arch/arm/boot/dts/sama5d2.dtsi | 2 +- drivers/memory/atmel-ebi.c | 13 +++-- drivers/mfd/atmel-smc.c | 67 +++++++++++++++++----- drivers/mtd/nand/atmel/nand-controller.c | 10 +++- include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++--- -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout 2017-07-18 13:22 [PATCH v2 0/3] Fix SMC layout register for sama5d2 Ludovic Desroches 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches @ 2017-07-18 13:22 ` Ludovic Desroches 2017-08-07 15:40 ` Lee Jones 2017-07-18 13:22 ` [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC Ludovic Desroches 2 siblings, 1 reply; 12+ messages in thread From: Ludovic Desroches @ 2017-07-18 13:22 UTC (permalink / raw) To: devicetree, linux-arm-kernel, linux-mtd Cc: linux-kernel, lee.jones, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro, Ludovic Desroches For HSMC controller, the register layout depends on the device i.e. the offset of setup, pulse, cycle, mode and timings registers is not the same. An helper is added to provide the correct register layout. Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation") Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> --- drivers/memory/atmel-ebi.c | 13 +++++-- drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++------- drivers/mtd/nand/atmel/nand-controller.c | 10 +++-- include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++----- 4 files changed, 92 insertions(+), 30 deletions(-) diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 99e644cda4d1..63c9e7a76854 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -51,6 +51,7 @@ struct atmel_ebi { struct { struct regmap *regmap; struct clk *clk; + const struct atmel_hsmc_reg_layout *layout; } smc; struct device *dev; @@ -84,8 +85,8 @@ static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid, struct atmel_ebi_dev_config *conf) { - atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs, - &conf->smcconf); + atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, + conf->cs, &conf->smcconf); } static const struct atmel_smc_timing_xlate timings_xlate_table[] = { @@ -285,8 +286,8 @@ static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid, static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid, struct atmel_ebi_dev_config *conf) { - atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs, - &conf->smcconf); + atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, + conf->cs, &conf->smcconf); } static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, @@ -525,6 +526,10 @@ static int atmel_ebi_probe(struct platform_device *pdev) if (IS_ERR(ebi->smc.regmap)) return PTR_ERR(ebi->smc.regmap); + ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); + if (IS_ERR(ebi->smc.layout)) + return PTR_ERR(ebi->smc.layout); + ebi->smc.clk = of_clk_get(smc_np, 0); if (IS_ERR(ebi->smc.clk)) { if (PTR_ERR(ebi->smc.clk) != -ENOENT) diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index 954cf0f66a31..4d34b22f859b 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); * atmel_hsmc_cs_conf_apply - apply an SMC CS conf * @regmap: the HSMC regmap * @cs: the CS id + * @layout: the layout of registers * @conf the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on post-sama5 SoCs. */ -void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs, - const struct atmel_smc_cs_conf *conf) +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, const struct atmel_smc_cs_conf *conf) { - regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup); - regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse); - regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle); - regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings); - regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode); + regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup); + regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse); + regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle); + regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings); + regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode); } EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); @@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf * @regmap: the HSMC regmap * @cs: the CS id + * @layout: the layout of registers * @conf: the SMC CS conf object to store the current conf * * Retrieve the SMC CS configuration. * Only valid on post-sama5 SoCs. */ -void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs, - struct atmel_smc_cs_conf *conf) +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, struct atmel_smc_cs_conf *conf) { - regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup); - regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse); - regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle); - regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings); - regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode); + regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup); + regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse); + regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle); + regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings); + regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode); } EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get); + +static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = { + .timing_regs_offset = 0x600, +}; + +static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = { + .timing_regs_offset = 0x700, +}; + +static const struct of_device_id atmel_smc_ids[] = { + { .compatible = "atmel,at91sam9260-smc", .data = NULL }, + { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout }, + { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout }, + { /* sentinel */ }, +}; + +/** + * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers + * @np: the HSMC regmap + * + * Retrieve the layout of HSMC registers. + * + * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer + * in HSMC case, otherwise ERR_PTR(-EINVAL). + */ +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(struct device_node *np) +{ + const struct of_device_id *match; + + match = of_match_node(atmel_smc_ids, np); + + return match ? match->data : ERR_PTR(-EINVAL); +} +EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout); diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c index d922a88e407f..29396e618965 100644 --- a/drivers/mtd/nand/atmel/nand-controller.c +++ b/drivers/mtd/nand/atmel/nand-controller.c @@ -247,6 +247,7 @@ struct atmel_hsmc_nand_controller { void __iomem *virt; dma_addr_t dma; } sram; + const struct atmel_hsmc_reg_layout *hsmc_layout; struct regmap *io; struct atmel_nfc_op op; struct completion complete; @@ -1431,12 +1432,12 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, int csline, const struct nand_data_interface *conf) { - struct atmel_nand_controller *nc; + struct atmel_hsmc_nand_controller *nc; struct atmel_smc_cs_conf smcconf; struct atmel_nand_cs *cs; int ret; - nc = to_nand_controller(nand->base.controller); + nc = to_hsmc_nand_controller(nand->base.controller); ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); if (ret) @@ -1451,7 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, if (cs->rb.type == ATMEL_NAND_NATIVE_RB) cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id); - atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf); + atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id, + &cs->smcconf); return 0; } @@ -2166,6 +2168,8 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc) return -EINVAL; } + nc->hsmc_layout = atmel_hsmc_get_reg_layout(np); + nc->irq = of_irq_get(np, 0); of_node_put(np); if (nc->irq < 0) { diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h index afa266169800..7a367f34b66a 100644 --- a/include/linux/mfd/syscon/atmel-smc.h +++ b/include/linux/mfd/syscon/atmel-smc.h @@ -15,21 +15,26 @@ #define _LINUX_MFD_SYSCON_ATMEL_SMC_H_ #include <linux/kernel.h> +#include <linux/of.h> #include <linux/regmap.h> #define ATMEL_SMC_SETUP(cs) (((cs) * 0x10)) -#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14)) +#define ATMEL_HSMC_SETUP(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14)) #define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4) -#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4) +#define ATMEL_HSMC_PULSE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4) #define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8) -#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8) +#define ATMEL_HSMC_CYCLE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8) #define ATMEL_SMC_NWE_SHIFT 0 #define ATMEL_SMC_NCS_WR_SHIFT 8 #define ATMEL_SMC_NRD_SHIFT 16 #define ATMEL_SMC_NCS_RD_SHIFT 24 #define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc) -#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10) +#define ATMEL_HSMC_MODE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10) #define ATMEL_SMC_MODE_READMODE_MASK BIT(0) #define ATMEL_SMC_MODE_READMODE_NCS (0 << 0) #define ATMEL_SMC_MODE_READMODE_NRD (1 << 0) @@ -59,7 +64,8 @@ #define ATMEL_SMC_MODE_PS_16 (2 << 28) #define ATMEL_SMC_MODE_PS_32 (3 << 28) -#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc) +#define ATMEL_HSMC_TIMINGS(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc) #define ATMEL_HSMC_TIMINGS_OCMS BIT(12) #define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28) #define ATMEL_HSMC_TIMINGS_NFSEL BIT(31) @@ -69,6 +75,10 @@ #define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16 #define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24 +struct atmel_hsmc_reg_layout { + unsigned int timing_regs_offset; +}; + /** * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet. * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200) @@ -98,11 +108,15 @@ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, unsigned int shift, unsigned int ncycles); void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, const struct atmel_smc_cs_conf *conf); -void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs, - const struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, const struct atmel_smc_cs_conf *conf); void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, struct atmel_smc_cs_conf *conf); -void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs, - struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, struct atmel_smc_cs_conf *conf); +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(struct device_node *np); #endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */ -- 2.12.2 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout 2017-07-18 13:22 ` [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout Ludovic Desroches @ 2017-08-07 15:40 ` Lee Jones 0 siblings, 0 replies; 12+ messages in thread From: Lee Jones @ 2017-08-07 15:40 UTC (permalink / raw) To: Ludovic Desroches Cc: devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro On Tue, 18 Jul 2017, Ludovic Desroches wrote: > For HSMC controller, the register layout depends on the device i.e. the > offset of setup, pulse, cycle, mode and timings registers is not the > same. An helper is added to provide the correct register layout. > > Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease > SMC regs manipulation") > Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/memory/atmel-ebi.c | 13 +++++-- > drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++------- > drivers/mtd/nand/atmel/nand-controller.c | 10 +++-- > include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++----- > 4 files changed, 92 insertions(+), 30 deletions(-) Applied, thanks. > diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c > index 99e644cda4d1..63c9e7a76854 100644 > --- a/drivers/memory/atmel-ebi.c > +++ b/drivers/memory/atmel-ebi.c > @@ -51,6 +51,7 @@ struct atmel_ebi { > struct { > struct regmap *regmap; > struct clk *clk; > + const struct atmel_hsmc_reg_layout *layout; > } smc; > > struct device *dev; > @@ -84,8 +85,8 @@ static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, > static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid, > struct atmel_ebi_dev_config *conf) > { > - atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs, > - &conf->smcconf); > + atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, > + conf->cs, &conf->smcconf); > } > > static const struct atmel_smc_timing_xlate timings_xlate_table[] = { > @@ -285,8 +286,8 @@ static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid, > static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid, > struct atmel_ebi_dev_config *conf) > { > - atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs, > - &conf->smcconf); > + atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, > + conf->cs, &conf->smcconf); > } > > static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, > @@ -525,6 +526,10 @@ static int atmel_ebi_probe(struct platform_device *pdev) > if (IS_ERR(ebi->smc.regmap)) > return PTR_ERR(ebi->smc.regmap); > > + ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); > + if (IS_ERR(ebi->smc.layout)) > + return PTR_ERR(ebi->smc.layout); > + > ebi->smc.clk = of_clk_get(smc_np, 0); > if (IS_ERR(ebi->smc.clk)) { > if (PTR_ERR(ebi->smc.clk) != -ENOENT) > diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c > index 954cf0f66a31..4d34b22f859b 100644 > --- a/drivers/mfd/atmel-smc.c > +++ b/drivers/mfd/atmel-smc.c > @@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); > * atmel_hsmc_cs_conf_apply - apply an SMC CS conf > * @regmap: the HSMC regmap > * @cs: the CS id > + * @layout: the layout of registers > * @conf the SMC CS conf to apply > * > * Applies an SMC CS configuration. > * Only valid on post-sama5 SoCs. > */ > -void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs, > - const struct atmel_smc_cs_conf *conf) > +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, > + const struct atmel_hsmc_reg_layout *layout, > + int cs, const struct atmel_smc_cs_conf *conf) > { > - regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup); > - regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse); > - regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle); > - regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings); > - regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode); > + regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup); > + regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse); > + regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle); > + regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings); > + regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode); > } > EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); > > @@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); > * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf > * @regmap: the HSMC regmap > * @cs: the CS id > + * @layout: the layout of registers > * @conf: the SMC CS conf object to store the current conf > * > * Retrieve the SMC CS configuration. > * Only valid on post-sama5 SoCs. > */ > -void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs, > - struct atmel_smc_cs_conf *conf) > +void atmel_hsmc_cs_conf_get(struct regmap *regmap, > + const struct atmel_hsmc_reg_layout *layout, > + int cs, struct atmel_smc_cs_conf *conf) > { > - regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup); > - regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse); > - regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle); > - regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings); > - regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode); > + regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup); > + regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse); > + regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle); > + regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings); > + regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode); > } > EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get); > + > +static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = { > + .timing_regs_offset = 0x600, > +}; > + > +static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = { > + .timing_regs_offset = 0x700, > +}; > + > +static const struct of_device_id atmel_smc_ids[] = { > + { .compatible = "atmel,at91sam9260-smc", .data = NULL }, > + { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout }, > + { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout }, > + { /* sentinel */ }, > +}; > + > +/** > + * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers > + * @np: the HSMC regmap > + * > + * Retrieve the layout of HSMC registers. > + * > + * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer > + * in HSMC case, otherwise ERR_PTR(-EINVAL). > + */ > +const struct atmel_hsmc_reg_layout * > +atmel_hsmc_get_reg_layout(struct device_node *np) > +{ > + const struct of_device_id *match; > + > + match = of_match_node(atmel_smc_ids, np); > + > + return match ? match->data : ERR_PTR(-EINVAL); > +} > +EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout); > diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c > index d922a88e407f..29396e618965 100644 > --- a/drivers/mtd/nand/atmel/nand-controller.c > +++ b/drivers/mtd/nand/atmel/nand-controller.c > @@ -247,6 +247,7 @@ struct atmel_hsmc_nand_controller { > void __iomem *virt; > dma_addr_t dma; > } sram; > + const struct atmel_hsmc_reg_layout *hsmc_layout; > struct regmap *io; > struct atmel_nfc_op op; > struct completion complete; > @@ -1431,12 +1432,12 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, > int csline, > const struct nand_data_interface *conf) > { > - struct atmel_nand_controller *nc; > + struct atmel_hsmc_nand_controller *nc; > struct atmel_smc_cs_conf smcconf; > struct atmel_nand_cs *cs; > int ret; > > - nc = to_nand_controller(nand->base.controller); > + nc = to_hsmc_nand_controller(nand->base.controller); > > ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); > if (ret) > @@ -1451,7 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, > if (cs->rb.type == ATMEL_NAND_NATIVE_RB) > cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id); > > - atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf); > + atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id, > + &cs->smcconf); > > return 0; > } > @@ -2166,6 +2168,8 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc) > return -EINVAL; > } > > + nc->hsmc_layout = atmel_hsmc_get_reg_layout(np); > + > nc->irq = of_irq_get(np, 0); > of_node_put(np); > if (nc->irq < 0) { > diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h > index afa266169800..7a367f34b66a 100644 > --- a/include/linux/mfd/syscon/atmel-smc.h > +++ b/include/linux/mfd/syscon/atmel-smc.h > @@ -15,21 +15,26 @@ > #define _LINUX_MFD_SYSCON_ATMEL_SMC_H_ > > #include <linux/kernel.h> > +#include <linux/of.h> > #include <linux/regmap.h> > > #define ATMEL_SMC_SETUP(cs) (((cs) * 0x10)) > -#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14)) > +#define ATMEL_HSMC_SETUP(layout, cs) \ > + ((layout)->timing_regs_offset + ((cs) * 0x14)) > #define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4) > -#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4) > +#define ATMEL_HSMC_PULSE(layout, cs) \ > + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4) > #define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8) > -#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8) > +#define ATMEL_HSMC_CYCLE(layout, cs) \ > + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8) > #define ATMEL_SMC_NWE_SHIFT 0 > #define ATMEL_SMC_NCS_WR_SHIFT 8 > #define ATMEL_SMC_NRD_SHIFT 16 > #define ATMEL_SMC_NCS_RD_SHIFT 24 > > #define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc) > -#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10) > +#define ATMEL_HSMC_MODE(layout, cs) \ > + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10) > #define ATMEL_SMC_MODE_READMODE_MASK BIT(0) > #define ATMEL_SMC_MODE_READMODE_NCS (0 << 0) > #define ATMEL_SMC_MODE_READMODE_NRD (1 << 0) > @@ -59,7 +64,8 @@ > #define ATMEL_SMC_MODE_PS_16 (2 << 28) > #define ATMEL_SMC_MODE_PS_32 (3 << 28) > > -#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc) > +#define ATMEL_HSMC_TIMINGS(layout, cs) \ > + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc) > #define ATMEL_HSMC_TIMINGS_OCMS BIT(12) > #define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28) > #define ATMEL_HSMC_TIMINGS_NFSEL BIT(31) > @@ -69,6 +75,10 @@ > #define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16 > #define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24 > > +struct atmel_hsmc_reg_layout { > + unsigned int timing_regs_offset; > +}; > + > /** > * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet. > * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200) > @@ -98,11 +108,15 @@ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, > unsigned int shift, unsigned int ncycles); > void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, > const struct atmel_smc_cs_conf *conf); > -void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs, > - const struct atmel_smc_cs_conf *conf); > +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, > + const struct atmel_hsmc_reg_layout *reglayout, > + int cs, const struct atmel_smc_cs_conf *conf); > void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, > struct atmel_smc_cs_conf *conf); > -void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs, > - struct atmel_smc_cs_conf *conf); > +void atmel_hsmc_cs_conf_get(struct regmap *regmap, > + const struct atmel_hsmc_reg_layout *reglayout, > + int cs, struct atmel_smc_cs_conf *conf); > +const struct atmel_hsmc_reg_layout * > +atmel_hsmc_get_reg_layout(struct device_node *np); > > #endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC 2017-07-18 13:22 [PATCH v2 0/3] Fix SMC layout register for sama5d2 Ludovic Desroches 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches 2017-07-18 13:22 ` [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout Ludovic Desroches @ 2017-07-18 13:22 ` Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:41 ` Lee Jones 2 siblings, 2 replies; 12+ messages in thread From: Ludovic Desroches @ 2017-07-18 13:22 UTC (permalink / raw) To: devicetree, linux-arm-kernel, linux-mtd Cc: linux-kernel, lee.jones, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro, Ludovic Desroches A new compatible string has been introduced for sama5d2 SMC to allow to manage the registers mapping change. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index cc06da394366..3e6e2dbc2595 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1048,7 +1048,7 @@ }; hsmc: hsmc@f8014000 { - compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; reg = <0xf8014000 0x1000>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; clocks = <&hsmc_clk>; -- 2.12.2 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC 2017-07-18 13:22 ` [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC Ludovic Desroches @ 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:41 ` Lee Jones 1 sibling, 0 replies; 12+ messages in thread From: Nicolas Ferre @ 2017-07-18 13:39 UTC (permalink / raw) To: Ludovic Desroches, devicetree, linux-arm-kernel, linux-mtd Cc: linux-kernel, lee.jones, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro On 18/07/2017 at 15:22, Ludovic Desroches wrote: > A new compatible string has been introduced for sama5d2 SMC to allow to > manage the registers mapping change. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > --- > arch/arm/boot/dts/sama5d2.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > index cc06da394366..3e6e2dbc2595 100644 > --- a/arch/arm/boot/dts/sama5d2.dtsi > +++ b/arch/arm/boot/dts/sama5d2.dtsi > @@ -1048,7 +1048,7 @@ > }; > > hsmc: hsmc@f8014000 { > - compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; > + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; > reg = <0xf8014000 0x1000>; > interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; > clocks = <&hsmc_clk>; > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC 2017-07-18 13:22 ` [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre @ 2017-08-07 15:41 ` Lee Jones 2017-08-07 21:28 ` Alexandre Belloni 1 sibling, 1 reply; 12+ messages in thread From: Lee Jones @ 2017-08-07 15:41 UTC (permalink / raw) To: Ludovic Desroches Cc: devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, alexandre.belloni, boris.brezillon, computersforpeace, romain.izard.pro On Tue, 18 Jul 2017, Ludovic Desroches wrote: > A new compatible string has been introduced for sama5d2 SMC to allow to > manage the registers mapping change. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > --- > arch/arm/boot/dts/sama5d2.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Applied, thanks. > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > index cc06da394366..3e6e2dbc2595 100644 > --- a/arch/arm/boot/dts/sama5d2.dtsi > +++ b/arch/arm/boot/dts/sama5d2.dtsi > @@ -1048,7 +1048,7 @@ > }; > > hsmc: hsmc@f8014000 { > - compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; > + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; > reg = <0xf8014000 0x1000>; > interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; > clocks = <&hsmc_clk>; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC 2017-08-07 15:41 ` Lee Jones @ 2017-08-07 21:28 ` Alexandre Belloni 2017-08-08 7:07 ` Lee Jones 0 siblings, 1 reply; 12+ messages in thread From: Alexandre Belloni @ 2017-08-07 21:28 UTC (permalink / raw) To: Lee Jones Cc: Ludovic Desroches, devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, boris.brezillon, computersforpeace, romain.izard.pro Hi Lee, On 07/08/2017 at 16:41:00 +0100, Lee Jones wrote: > On Tue, 18 Jul 2017, Ludovic Desroches wrote: > > > A new compatible string has been introduced for sama5d2 SMC to allow to > > manage the registers mapping change. > > > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > > --- > > arch/arm/boot/dts/sama5d2.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > Applied, thanks. > I've already applied that one and sent it to arm-soc as a fix for 4.13 (I think we agreed on that). > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > > index cc06da394366..3e6e2dbc2595 100644 > > --- a/arch/arm/boot/dts/sama5d2.dtsi > > +++ b/arch/arm/boot/dts/sama5d2.dtsi > > @@ -1048,7 +1048,7 @@ > > }; > > > > hsmc: hsmc@f8014000 { > > - compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; > > + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; > > reg = <0xf8014000 0x1000>; > > interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; > > clocks = <&hsmc_clk>; > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog -- Alexandre Belloni, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC 2017-08-07 21:28 ` Alexandre Belloni @ 2017-08-08 7:07 ` Lee Jones 0 siblings, 0 replies; 12+ messages in thread From: Lee Jones @ 2017-08-08 7:07 UTC (permalink / raw) To: Alexandre Belloni Cc: Ludovic Desroches, devicetree, linux-arm-kernel, linux-mtd, linux-kernel, nicolas.ferre, boris.brezillon, computersforpeace, romain.izard.pro On Mon, 07 Aug 2017, Alexandre Belloni wrote: > Hi Lee, > > On 07/08/2017 at 16:41:00 +0100, Lee Jones wrote: > > On Tue, 18 Jul 2017, Ludovic Desroches wrote: > > > > > A new compatible string has been introduced for sama5d2 SMC to allow to > > > manage the registers mapping change. > > > > > > Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> > > > --- > > > arch/arm/boot/dts/sama5d2.dtsi | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > Applied, thanks. > > > > I've already applied that one and sent it to arm-soc as a fix for 4.13 > (I think we agreed on that). Okay, I just looked through my mail and remember the conversation. So the question remains; why was the patch re-sent as part of this set *after* it had already been applied? Patch unapplied, thanks. > > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > > > index cc06da394366..3e6e2dbc2595 100644 > > > --- a/arch/arm/boot/dts/sama5d2.dtsi > > > +++ b/arch/arm/boot/dts/sama5d2.dtsi > > > @@ -1048,7 +1048,7 @@ > > > }; > > > > > > hsmc: hsmc@f8014000 { > > > - compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; > > > + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; > > > reg = <0xf8014000 0x1000>; > > > interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; > > > clocks = <&hsmc_clk>; > > > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-08-08 7:07 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-07-18 13:22 [PATCH v2 0/3] Fix SMC layout register for sama5d2 Ludovic Desroches 2017-07-18 13:22 ` [PATCH v2 1/3] mfd: syscon: update Atmel SMC binding doc Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:40 ` Lee Jones 2017-08-07 15:41 ` Lee Jones 2017-07-18 13:22 ` [PATCH v2 2/3] mfd: syscon: atmel-smc: add helper to retrieve register layout Ludovic Desroches 2017-08-07 15:40 ` Lee Jones 2017-07-18 13:22 ` [PATCH v2 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC Ludovic Desroches 2017-07-18 13:39 ` Nicolas Ferre 2017-08-07 15:41 ` Lee Jones 2017-08-07 21:28 ` Alexandre Belloni 2017-08-08 7:07 ` Lee Jones
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).