* [PATCH] arm64: dts: ls1088a: Add USB support
@ 2017-08-17 2:52 yinbo.zhu
2017-08-17 14:02 ` Shawn Guo
0 siblings, 1 reply; 6+ messages in thread
From: yinbo.zhu @ 2017-08-17 2:52 UTC (permalink / raw)
To: yinbo.zhu, linux-devel, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon
Cc: Shawn Guo, Harninder Rai, Raghav Dogra, Ashish Kumar,
Yuantian Tang, open list:, moderated list:,
open list
From: "yinbo.zhu" <yinbo.zhu@nxp.com>
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index e9276a5..949cd67 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -145,6 +145,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 3a3be87..0dbff29 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -458,6 +458,24 @@
status = "disabled";
};
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ configure-gfladj;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: ls1088a: Add USB support
2017-08-17 2:52 [PATCH] arm64: dts: ls1088a: Add USB support yinbo.zhu
@ 2017-08-17 14:02 ` Shawn Guo
2017-08-18 7:48 ` Yinbo Zhu
0 siblings, 1 reply; 6+ messages in thread
From: Shawn Guo @ 2017-08-17 14:02 UTC (permalink / raw)
To: yinbo.zhu
Cc: linux-devel, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Harninder Rai, Yuantian Tang, open list:,
Ashish Kumar, open list, Raghav Dogra, moderated list:
On Thu, Aug 17, 2017 at 10:52:38AM +0800, yinbo.zhu@nxp.com wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
> 2 files changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index e9276a5..949cd67 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -145,6 +145,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
Sort the labelled node alphabetically.
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 3a3be87..0dbff29 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -458,6 +458,24 @@
> status = "disabled";
> };
>
> + usb0: usb3@3100000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 0x4>; /* Level high type */
Use IRQ_TYPE_LEVEL_HIGH, so that you can save the comment.
> + dr_mode = "host";
> + configure-gfladj;
What is this? I do not see it in upstream kernel.
> + snps,dis_rxdet_inp3_quirk;
You probably need a "disabled" status.
Shawn
> + };
> +
> + usb1: usb3@3110000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 0x4>; /* Level high type */
> + dr_mode = "host";
> + configure-gfladj;
> + snps,dis_rxdet_inp3_quirk;
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] arm64: dts: ls1088a: Add USB support
2017-08-17 14:02 ` Shawn Guo
@ 2017-08-18 7:48 ` Yinbo Zhu
2017-08-18 8:03 ` Shawn Guo
0 siblings, 1 reply; 6+ messages in thread
From: Yinbo Zhu @ 2017-08-18 7:48 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-devel, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Harninder Rai, Andy Tang, open list:,
Ashish Kumar, open list, Raghav Dogra, moderated list:
-----Original Message-----
From: Shawn Guo [mailto:shawnguo@kernel.org]
Sent: Thursday, August 17, 2017 10:03 PM
To: Yinbo Zhu <yinbo.zhu@nxp.com>
Cc: linux-devel@gforge.freescale.net; Rob Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Catalin Marinas <catalin.marinas@arm.com>; Will Deacon <will.deacon@arm.com>; Harninder Rai <harninder.rai@nxp.com>; Andy Tang <andy.tang@nxp.com>; open list: <devicetree@vger.kernel.org>; Ashish Kumar <ashish.kumar@nxp.com>; open list <linux-kernel@vger.kernel.org>; Raghav Dogra <raghav.dogra@nxp.com>; moderated list: <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] arm64: dts: ls1088a: Add USB support
On Thu, Aug 17, 2017 at 10:52:38AM +0800, yinbo.zhu@nxp.com wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
> 2 files changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index e9276a5..949cd67 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -145,6 +145,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
Sort the labelled node alphabetically.
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index 3a3be87..0dbff29 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -458,6 +458,24 @@
> status = "disabled";
> };
>
> + usb0: usb3@3100000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 0x4>; /* Level high type */
Use IRQ_TYPE_LEVEL_HIGH, so that you can save the comment.
> + dr_mode = "host";
> + configure-gfladj;
What is this? I do not see it in upstream kernel.
> + snps,dis_rxdet_inp3_quirk;
You probably need a "disabled" status.
Shawn
Hi Shawn,
About your description " You probably need a "disabled" status."
Your meaning is that remove the property "snps,dis_rxdet_inp3_quirk;", isn't it?
In fact, if remove the property , 1088ardb usb will doesn't detect.
Yinbo
> + };
> +
> + usb1: usb3@3110000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 0x4>; /* Level high type */
> + dr_mode = "host";
> + configure-gfladj;
> + snps,dis_rxdet_inp3_quirk;
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: ls1088a: Add USB support
2017-08-18 7:48 ` Yinbo Zhu
@ 2017-08-18 8:03 ` Shawn Guo
0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2017-08-18 8:03 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Mark Rutland, Harninder Rai, Andy Tang, open list:,
Catalin Marinas, Will Deacon, Ashish Kumar, open list,
Rob Herring, linux-devel, Raghav Dogra, moderated list:
On Fri, Aug 18, 2017 at 07:48:19AM +0000, Yinbo Zhu wrote:
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > index 3a3be87..0dbff29 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > @@ -458,6 +458,24 @@
> > status = "disabled";
> > };
> >
> > + usb0: usb3@3100000 {
> > + compatible = "snps,dwc3";
> > + reg = <0x0 0x3100000 0x0 0x10000>;
> > + interrupts = <0 80 0x4>; /* Level high type */
>
> Use IRQ_TYPE_LEVEL_HIGH, so that you can save the comment.
>
> > + dr_mode = "host";
> > + configure-gfladj;
>
> What is this? I do not see it in upstream kernel.
>
> > + snps,dis_rxdet_inp3_quirk;
>
> You probably need a "disabled" status.
>
> Shawn
>
> Hi Shawn,
>
> About your description " You probably need a "disabled" status."
> Your meaning is that remove the property "snps,dis_rxdet_inp3_quirk;", isn't it?
> In fact, if remove the property , 1088ardb usb will doesn't detect.
No, that's not what I meant. I meant the USB device should be disabled
by default in <soc>.dtsi by having the following line.
status = "disabled";
And then if your board has the pin-out of this USB device, you have the
line below to turn on the support.
status = "okay";
Shawn
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: ls1088a: Add USB support
2017-08-18 8:14 yinbo.zhu
@ 2017-08-18 13:02 ` Shawn Guo
0 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2017-08-18 13:02 UTC (permalink / raw)
To: yinbo.zhu
Cc: linux-devel, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Harninder Rai, Ashish Kumar, Yuantian Tang,
open list:, moderated list:,
open list
On Fri, Aug 18, 2017 at 04:14:45PM +0800, yinbo.zhu@nxp.com wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
You are sending an updated patch. Please have the version number in
subject prefix ...
> ---
... and a change history here. There are a lot of good examples on the
list. Please have a check.
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb7..6c3c3bc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
I had already put this on previous version - please sort these labelled
nodes alphabetically. That said, &usb should go after &sata.
Shawn
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: dts: ls1088a: Add USB support
@ 2017-08-18 8:14 yinbo.zhu
2017-08-18 13:02 ` Shawn Guo
0 siblings, 1 reply; 6+ messages in thread
From: yinbo.zhu @ 2017-08-18 8:14 UTC (permalink / raw)
To: yinbo.zhu, linux-devel, Rob Herring, Mark Rutland,
Catalin Marinas, Will Deacon
Cc: Shawn Guo, Harninder Rai, Ashish Kumar, Yuantian Tang, open list:,
moderated list:,
open list
From: "yinbo.zhu" <yinbo.zhu@nxp.com>
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb7..6c3c3bc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -118,6 +118,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06..c23fede 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -359,6 +359,26 @@
status = "disabled";
};
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-08-18 13:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-17 2:52 [PATCH] arm64: dts: ls1088a: Add USB support yinbo.zhu
2017-08-17 14:02 ` Shawn Guo
2017-08-18 7:48 ` Yinbo Zhu
2017-08-18 8:03 ` Shawn Guo
2017-08-18 8:14 yinbo.zhu
2017-08-18 13:02 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).