[PATCH v5 0/4] can: Support transceiver based bit rate limit

[PATCH v5 0/4] can: Support transceiver based bit rate limit

[Franklin S Cooper Jr]

Add a new generic binding that CAN drivers can be used to specify the max
bit rate supported by a transceiver. This is useful since in some instances
since the maximum speeds may be limited by the transceiver used. However,
transceivers may not provide a means to determine this limitation at
runtime. Therefore, create a new binding that mimics "fixed-link" that
allows a user to hardcode the max speeds that can be used.

Also add support for this new binding in the MCAN driver.

Note this is an optional subnode so even if a driver adds support for
parsing can-transceiver the user does not have to define it in their
device tree.

Version 5 changes:
Got rid of is_bitrate_limited
Removed @ symbol from can-transceiver binding

Version 4 changes:
Switch from fixed-transceiver to can-transceiver
Drop unit address that snuck back in again.
Indicate that can-transceiver is a subnode and not a property in
documentation

Version 3 changes:
Switch from having two "max bitrates" to one universal bitrate.

Version 2 changes:
Rename function
Define proper variable default
Drop unit address
Move check to changelink function
Reword commit message
Reword documentation


Franklin S Cooper Jr (4):
  can: dev: Add support for limiting configured bitrate
  dt-bindings: can: can-transceiver: Document new binding
  dt-bindings: can: m_can: Document new can transceiver binding
  can: m_can: Add call to of_can_transceiver

 .../bindings/net/can/can-transceiver.txt           | 24 +++++++++++++
 .../devicetree/bindings/net/can/m_can.txt          |  9 +++++
 drivers/net/can/dev.c                              | 39 ++++++++++++++++++++++
 drivers/net/can/m_can/m_can.c                      |  2 ++
 include/linux/can/dev.h                            |  4 +++
 5 files changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/can-transceiver.txt

-- 
2.9.4.dirty

[PATCH v5 1/4] can: dev: Add support for limiting configured bitrate

[Franklin S Cooper Jr]

Various CAN or CAN-FD IP may be able to run at a faster rate than
what the transceiver the CAN node is connected to. This can lead to
unexpected errors. However, CAN transceivers typically have fixed
limitations and provide no means to discover these limitations at
runtime. Therefore, add support for a can-transceiver node that
can be reused by other CAN peripheral drivers to determine for both
CAN and CAN-FD what the max bitrate that can be used. If the user
tries to configure CAN to pass these maximum bitrates it will throw
an error.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Version 5 changes:
Set values for some variables at the very top.
Remove usage of is_bitrate_limited

 drivers/net/can/dev.c   | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/can/dev.h |  4 ++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 365a8cc..d0e5b46 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -27,6 +27,7 @@
 #include <linux/can/skb.h>
 #include <linux/can/netlink.h>
 #include <linux/can/led.h>
+#include <linux/of.h>
 #include <net/rtnetlink.h>
 
 #define MOD_DESC "CAN device driver interface"
@@ -814,6 +815,30 @@ int open_candev(struct net_device *dev)
 }
 EXPORT_SYMBOL_GPL(open_candev);
 
+#ifdef CONFIG_OF
+/*
+ * Common function that can be used to understand the limitation of
+ * a transceiver when it provides no means to determine these limitations
+ * at runtime.
+ */
+void of_can_transceiver(struct net_device *dev)
+{
+	struct device_node *dn;
+	struct can_priv *priv = netdev_priv(dev);
+	struct device_node *np = dev->dev.parent->of_node;
+	int ret;
+
+	dn = of_get_child_by_name(np, "can-transceiver");
+	if (!dn)
+		return;
+
+	ret = of_property_read_u32(dn, "max-bitrate", &priv->max_bitrate);
+	if ((ret && ret != -EINVAL) || (!ret && !priv->max_bitrate))
+		netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
+}
+EXPORT_SYMBOL(of_can_transceiver);
+#endif
+
 /*
  * Common close function for cleanup before the device gets closed.
  *
@@ -913,6 +938,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->max_bitrate && bt.bitrate > priv->max_bitrate) {
+			netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->max_bitrate);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->bittiming, &bt, sizeof(bt));
 
 		if (priv->do_set_bittiming) {
@@ -997,6 +1029,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 					priv->data_bitrate_const_cnt);
 		if (err)
 			return err;
+
+		if (priv->max_bitrate && dbt.bitrate > priv->max_bitrate) {
+			netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n",
+				   priv->max_bitrate);
+			return -EINVAL;
+		}
+
 		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
 
 		if (priv->do_set_data_bittiming) {
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 141b05a..0063c51 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -47,6 +47,8 @@ struct can_priv {
 	unsigned int data_bitrate_const_cnt;
 	struct can_clock clock;
 
+	unsigned int max_bitrate;
+
 	enum can_state state;
 
 	/* CAN controller features - see include/uapi/linux/can/netlink.h */
@@ -165,6 +167,8 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
 void can_free_echo_skb(struct net_device *dev, unsigned int idx);
 
+void of_can_transceiver(struct net_device *dev);
+
 struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
 struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 				struct canfd_frame **cfd);
-- 
2.9.4.dirty

[PATCH v5 2/4] dt-bindings: can: can-transceiver: Document new binding

[Franklin S Cooper Jr]

Add documentation to describe usage of the new can-transceiver binding.
This new binding is applicable for any CAN device therefore it exists as
its own document.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Version 5 changes:
Remove @ symbol from can-transceiver example

 .../bindings/net/can/can-transceiver.txt           | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/can-transceiver.txt

diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
new file mode 100644
index 0000000..0011f53
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.txt
@@ -0,0 +1,24 @@
+Generic CAN transceiver Device Tree binding
+------------------------------
+
+CAN transceiver typically limits the max speed in standard CAN and CAN FD
+modes. Typically these limitations are static and the transceivers themselves
+provide no way to detect this limitation at runtime. For this situation,
+the "can-transceiver" node can be used.
+
+Required Properties:
+ max-bitrate:	a positive non 0 value that determines the max
+		speed that CAN/CAN-FD can run. Any other value
+		will be ignored.
+
+Examples:
+
+Based on Texas Instrument's TCAN1042HGV CAN Transceiver
+
+m_can0 {
+	....
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+	...
+};
-- 
2.9.4.dirty

[PATCH v5 3/4] dt-bindings: can: m_can: Document new can transceiver binding

[Franklin S Cooper Jr]

Add information regarding can-transceiver binding. This is especially
important for MCAN since the IP allows CAN FD mode to run significantly
faster than what most transceivers are capable of.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Remove @ symbol from can-transceiver example

 Documentation/devicetree/bindings/net/can/m_can.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e33177..0bdae2a 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -43,6 +43,11 @@ Required properties:
 			  Please refer to 2.4.1 Message RAM Configuration in
 			  Bosch M_CAN user manual for details.
 
+Optional Subnode:
+- can-transceiver	: Can-transceiver subnode describing maximum speed
+			  that can be used for CAN/CAN-FD modes. See
+			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
+			  for details.
 Example:
 SoC dtsi:
 m_can1: can@020e8000 {
@@ -64,4 +69,8 @@ Board dts:
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_m_can1>;
 	status = "enabled";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
 };
-- 
2.9.4.dirty

[PATCH v5 4/4] can: m_can: Add call to of_can_transceiver

[Franklin S Cooper Jr]

Add call to new generic functions that provides support via a binding
to limit the arbitration rate and/or data rate imposed by the physical
transceiver connected to the MCAN peripheral.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 drivers/net/can/m_can/m_can.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index f4947a7..f72116e 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1649,6 +1649,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
 
 	devm_can_led_init(dev);
 
+	of_can_transceiver(dev);
+
 	dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
 		 KBUILD_MODNAME, dev->irq, priv->version);
 
-- 
2.9.4.dirty