[PATCH v6 00/11] net: stmmac: dwmac-sun8i: Handle integrated PHY

[PATCH v6 00/11] net: stmmac: dwmac-sun8i: Handle integrated PHY

[Corentin Labbe]

Hello

The current way to find if the PHY is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the integrated one.

This patchs series adds a new way to find if the PHY is integrated, via
the phy-is-integrated DT property.

Since it exists both integrated and external ethernet-phy@1, they are merged in
the final DTB and so share all properties.
For avoiding this, and better represent the reality, we use a MDIO mux.

The first try was to create a new MDIO mux "mdio-mux-syscon".
mdio-mux-syscon working the same way than mdio-mux-mmioreg with the exception
that the register is used via syscon/regmap.
But this solution does not work for two reason:
- changing the MDIO selection need the reset of MAC which cannot be done by the
        mdio-mux-syscon driver
- There were driver loading order problem:
        - mdio-mux-syscon needing that stmmac register the parent MDIO
        - stmmac needing that child MDIO was registered just after registering parent MDIO

So we cannot use any external MDIO-mux.

The final solution was to represent a mdio-mux and let the MAC handle all things.
Note that phy-is-integrated is still needed (even if we use a MDIO mux) since
some properties apply only on integrated PHY and we need to know the final MDIO
bus in mdio_mux_syscon_switch_fn().

Since DT bits was reverted in 4.13, this patch series include the revert of the revert.
So
- the first four patchs bring back DT/stmmac stuff that was in 4.13 (and reverted)
- fifth patch document how DT MDIO mux is implemented
- patch 6 and 7 modify DT
- patch 8, 9, 10 Modify stmmac according to the new bindings

I have let patch splited for easy review. (for seeing what's new)
But the final serie could have some patch squashed if someone want.
Like squashing patch and 2 and 5 (documentation)

Since DT worked well in 4.13, could it be targeted for 4.14 ?
If necessary I could split this serie in two:
- bring back A64/A83T (patchs 1, 2, 4, 7, 9)
- add MXIO-mux and H3 (patchs 3, 4, 5, 6, 8, 10)

Regards

Changes since v5:
- reordered patch 1 and 2
- mdio-mux node is now a mdio's child
- added patch 11 for removing unnecessary scan of mdio-mux

Changes since v4:
- Update documentation for new bindings
- Added 4 patchs for bring back reverted stuff of 4.13
- dwmac-sun8i now handle mdio-mux
- MDIO use now compatible = "snps,dwmac-mdio";

Changes since v3:
- Added a patch for handling fixed-link
- Updated documentation

Changes since v2:
- Add a MDIO mux for creating distinction between integrated and external MDIO.
- phy-is-integrated is not set in dtsi.

Changes since v1:
- Dropped phy-is-integrated documentation patch since another same patch was already merged
- Moved phy-is-integrated from SoC dtsi to final board DT.

Corentin Labbe (11):
  dt-bindings: net: Restore sun8i dwmac binding
  arm: dts: sunxi: Restore EMAC changes
  arm64: dts: allwinner: Restore EMAC changes
  net: stmmac: sun8i: Restore the compatibles
  dt-bindings: net: dwmac-sun8i: update documentation about integrated
    PHY
  ARM: dts: sunxi: h3/h5: represent the mdio switch used by
    sun8i-h3-emac
  arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio
  net: stmmac: snps,dwmac-mdio MDIOs are automatically registered
  net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated
  net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs
  of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

 .../devicetree/bindings/net/dwmac-sun8i.txt        | 198 +++++++++++++++++++++
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts  |   9 +
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    |  19 ++
 arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts          |   7 +
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          |   8 +
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        |   8 +
 arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts    |   5 +
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         |   8 +
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts       |  22 +++
 arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts     |  16 ++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |  45 +++++
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts |  16 ++
 .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts  |  15 ++
 .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts |  17 ++
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts  |  16 ++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |  21 +++
 .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts   |  17 ++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  |  17 ++
 .../dts/allwinner/sun50i-h5-orangepi-prime.dts     |  17 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c  | 140 ++++++++++++---
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   4 -
 drivers/of/of_mdio.c                               |  10 ++
 23 files changed, 611 insertions(+), 25 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt

-- 
2.13.5

[PATCH v6 01/11] dt-bindings: net: Restore sun8i dwmac binding

[Corentin Labbe]

This patch restore dt-bindings documentation about dwmac-sun8i
This reverts commit 8aa33ec2f481 ("dt-bindings: net: Revert sun8i dwmac binding")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 .../devicetree/bindings/net/dwmac-sun8i.txt        | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt

diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
new file mode 100644
index 000000000000..725f3b187886
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -0,0 +1,84 @@
+* Allwinner sun8i GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+- compatible: should be one of the following string:
+		"allwinner,sun8i-a83t-emac"
+		"allwinner,sun8i-h3-emac"
+		"allwinner,sun8i-v3s-emac"
+		"allwinner,sun50i-a64-emac"
+- reg: address and length of the register for the device.
+- interrupts: interrupt for the device
+- interrupt-names: should be "macirq"
+- clocks: A phandle to the reference clock for this device
+- clock-names: should be "stmmaceth"
+- resets: A phandle to the reset control for this device
+- reset-names: should be "stmmaceth"
+- phy-mode: See ethernet.txt
+- phy-handle: See ethernet.txt
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+- syscon: A phandle to the syscon of the SoC with one of the following
+ compatible string:
+  - allwinner,sun8i-h3-system-controller
+  - allwinner,sun8i-v3s-system-controller
+  - allwinner,sun50i-a64-system-controller
+  - allwinner,sun8i-a83t-system-controller
+
+Optional properties:
+- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0)
+- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0)
+Both delay properties need to be a multiple of 100. They control the delay for
+external PHY.
+
+Optional properties for the following compatibles:
+  - "allwinner,sun8i-h3-emac",
+  - "allwinner,sun8i-v3s-emac":
+- allwinner,leds-active-low: EPHY LEDs are active low
+
+Required child node of emac:
+- mdio bus node: should be named mdio
+
+Required properties of the mdio node:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+The device node referenced by "phy" or "phy-handle" should be a child node
+of the mdio node. See phy.txt for the generic PHY bindings.
+
+Required properties of the phy node with the following compatibles:
+  - "allwinner,sun8i-h3-emac",
+  - "allwinner,sun8i-v3s-emac":
+- clocks: a phandle to the reference clock for the EPHY
+- resets: a phandle to the reset control for the EPHY
+
+Example:
+
+emac: ethernet@1c0b000 {
+	compatible = "allwinner,sun8i-h3-emac";
+	syscon = <&syscon>;
+	reg = <0x01c0b000 0x104>;
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "macirq";
+	resets = <&ccu RST_BUS_EMAC>;
+	reset-names = "stmmaceth";
+	clocks = <&ccu CLK_BUS_EMAC>;
+	clock-names = "stmmaceth";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		int_mii_phy: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&ccu CLK_BUS_EPHY>;
+			resets = <&ccu RST_BUS_EPHY>;
+		};
+	};
+};
-- 
2.13.5

[PATCH v6 02/11] arm: dts: sunxi: Restore EMAC changes

[Corentin Labbe]

This patch restore arm DT about dwmac-sun8i
This reverts commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts |  9 ++++++++
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts   | 19 +++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  7 ++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  8 +++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  8 +++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts   |  5 +++++
 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  8 +++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 22 +++++++++++++++++++
 arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 16 ++++++++++++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                | 26 +++++++++++++++++++++++
 10 files changed, 128 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index b1502df7b509..6713d0f2b3f4 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -56,6 +56,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
 		ethernet1 = &xr819;
 	};
 
@@ -102,6 +104,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index e1dba9ffa94b..cc20d676a642 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -52,6 +52,7 @@
 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -111,12 +112,30 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 8d2cc6e9a03f..78f6c24952dd 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -46,3 +46,10 @@
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
 };
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 8ff71b1bb45b..17cdeae19c6f 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -54,6 +54,7 @@
 	aliases {
 		serial0 = &uart0;
 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
 		ethernet1 = &rtl8189;
 	};
 
@@ -117,6 +118,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 5fea430e0eb1..6880268e8b87 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -52,6 +52,7 @@
 	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -97,6 +98,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 8b93f5c781a7..a10281b455f5 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,6 +53,11 @@
 	};
 };
 
+&emac {
+	/* LEDs changed to active high on the plus */
+	/delete-property/ allwinner,leds-active-low;
+};
+
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index c88518b3f538..f5f0f15a2088 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -52,6 +52,7 @@
 	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -117,6 +118,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 828ae7a526d9..331ed683ac62 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -47,6 +47,10 @@
 	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
+	aliases {
+		ethernet0 = &emac;
+	};
+
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac-3v3";
@@ -74,6 +78,24 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 97920b12a944..80026f3caafc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -61,3 +61,19 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
 	};
 };
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index f68f6c534e2a..3b7d953429a6 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -408,6 +408,32 @@
 			clocks = <&osc24M>;
 		};
 
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				int_mii_phy: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					clocks = <&ccu CLK_BUS_EPHY>;
+					resets = <&ccu RST_BUS_EPHY>;
+				};
+			};
+		};
+
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
-- 
2.13.5

[PATCH v6 03/11] arm64: dts: allwinner: Restore EMAC changes

[Corentin Labbe]

This patch restore arm64 DT about dwmac-sun8i
This reverts commit 87e1f5e8bb4b ("arm64: dts: allwinner: Revert EMAC changes")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts   | 16 ++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts    | 15 +++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts  | 17 +++++++++++++++++
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 16 ++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 20 ++++++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts     | 17 +++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts    | 17 +++++++++++++++++
 .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts  | 17 +++++++++++++++++
 8 files changed, 135 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index d347f52e27f6..45bdbfb96126 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -51,6 +51,7 @@
 	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -69,6 +70,14 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -79,6 +88,13 @@
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index f82ccf332c0f..24f1aac366d6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -48,3 +48,18 @@
 
 	/* TODO: Camera, touchscreen, etc. */
 };
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index d06e34b5d192..806442d3e846 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -51,6 +51,7 @@
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -71,6 +72,15 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	status = "okay";
+
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -81,6 +91,13 @@
 	bias-pull-up;
 };
 
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index 17ccc12b58df..0eb2acedf8c3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -53,6 +53,7 @@
 		     "allwinner,sun50i-a64";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -76,6 +77,21 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 39ca22d418a2..75494cd90e40 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -502,6 +502,26 @@
 			#size-cells = <0>;
 		};
 
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 1c2387bd5df6..968908761194 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -50,6 +50,7 @@
 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -108,6 +109,22 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 4f77c8470f6c..a8296feee884 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,6 +59,7 @@
 	};
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -136,12 +137,28 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index 6be06873e5af..d906b302cbcd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -54,6 +54,7 @@
 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
 
 	aliases {
+		ethernet0 = &emac;
 		serial0 = &uart0;
 	};
 
@@ -143,12 +144,28 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
 
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-- 
2.13.5

[PATCH v6 04/11] net: stmmac: sun8i: Restore the compatibles

[Corentin Labbe]

This patch restore compatibles about dwmac-sun8i
This reverts commit ad4540cc5aa3 ("net: stmmac: sun8i: Remove the compatibles")

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 39c2122a4f26..fffd6d5fc907 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -979,6 +979,14 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id sun8i_dwmac_match[] = {
+	{ .compatible = "allwinner,sun8i-h3-emac",
+		.data = &emac_variant_h3 },
+	{ .compatible = "allwinner,sun8i-v3s-emac",
+		.data = &emac_variant_v3s },
+	{ .compatible = "allwinner,sun8i-a83t-emac",
+		.data = &emac_variant_a83t },
+	{ .compatible = "allwinner,sun50i-a64-emac",
+		.data = &emac_variant_a64 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun8i_dwmac_match);
-- 
2.13.5

[PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe]

This patch add documentation about the MDIO switch used on sun8i-h3-emac
for integrated PHY.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 .../devicetree/bindings/net/dwmac-sun8i.txt        | 138 +++++++++++++++++++--
 1 file changed, 126 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 725f3b187886..e2ef4683df08 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
 Please see stmmac.txt for the other unchanged properties.
 
 Required properties:
-- compatible: should be one of the following string:
+- compatible: must be one of the following string:
 		"allwinner,sun8i-a83t-emac"
 		"allwinner,sun8i-h3-emac"
 		"allwinner,sun8i-v3s-emac"
 		"allwinner,sun50i-a64-emac"
 - reg: address and length of the register for the device.
 - interrupts: interrupt for the device
-- interrupt-names: should be "macirq"
+- interrupt-names: must be "macirq"
 - clocks: A phandle to the reference clock for this device
-- clock-names: should be "stmmaceth"
+- clock-names: must be "stmmaceth"
 - resets: A phandle to the reset control for this device
-- reset-names: should be "stmmaceth"
+- reset-names: must be "stmmaceth"
 - phy-mode: See ethernet.txt
 - phy-handle: See ethernet.txt
 - #address-cells: shall be 1
@@ -39,23 +39,38 @@ Optional properties for the following compatibles:
 - allwinner,leds-active-low: EPHY LEDs are active low
 
 Required child node of emac:
-- mdio bus node: should be named mdio
+- mdio bus node: with compatible "snps,dwmac-mdio"
 
 Required properties of the mdio node:
 - #address-cells: shall be 1
 - #size-cells: shall be 0
 
-The device node referenced by "phy" or "phy-handle" should be a child node
+The device node referenced by "phy" or "phy-handle" must be a child node
 of the mdio node. See phy.txt for the generic PHY bindings.
 
-Required properties of the phy node with the following compatibles:
+The following compatibles require that the mdio node have a mdio-mux child
+node called "mdio-mux":
+  - "allwinner,sun8i-h3-emac"
+  - "allwinner,sun8i-v3s-emac":
+Required properties for the mdio-mux node:
+  - compatible = "mdio-mux"
+  - one child mdio for the integrated mdio
+  - one child mdio for the external mdio if present (V3s have none)
+Required properties for the mdio-mux children node:
+  - reg: 1 for internal MDIO bus, 2 for external MDIO bus
+
+The following compatibles require a PHY node representing the integrated
+PHY, under the integrated MDIO bus node if an mdio-mux node is used:
   - "allwinner,sun8i-h3-emac",
   - "allwinner,sun8i-v3s-emac":
+
+Required properties of the integrated phy node:
 - clocks: a phandle to the reference clock for the EPHY
 - resets: a phandle to the reset control for the EPHY
+- phy-is-integrated
+- Must be a child of the integrated mdio
 
-Example:
-
+Example with integrated PHY:
 emac: ethernet@1c0b000 {
 	compatible = "allwinner,sun8i-h3-emac";
 	syscon = <&syscon>;
@@ -72,13 +87,112 @@ emac: ethernet@1c0b000 {
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
 	allwinner,leds-active-low;
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		mdio-mux {
+			compatible = "mdio-mux";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			int_mdio: mdio@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				int_mii_phy: ethernet-phy@1 {
+					reg = <1>;
+					clocks = <&ccu CLK_BUS_EPHY>;
+					resets = <&ccu RST_BUS_EPHY>;
+					phy-is-integrated;
+				};
+			};
+			ext_mdio: mdio@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+Example with external PHY:
+emac: ethernet@1c0b000 {
+	compatible = "allwinner,sun8i-h3-emac";
+	syscon = <&syscon>;
+	reg = <0x01c0b000 0x104>;
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "macirq";
+	resets = <&ccu RST_BUS_EMAC>;
+	reset-names = "stmmaceth";
+	clocks = <&ccu CLK_BUS_EMAC>;
+	clock-names = "stmmaceth";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	allwinner,leds-active-low;
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		mdio-mux {
+			compatible = "mdio-mux";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			int_mdio: mdio@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				int_mii_phy: ethernet-phy@1 {
+					reg = <1>;
+					clocks = <&ccu CLK_BUS_EPHY>;
+					resets = <&ccu RST_BUS_EPHY>;
+					phy-is-integrated;
+				};
+			};
+			ext_mdio: mdio@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ext_rgmii_phy: ethernet-phy@1 {
+					reg = <1>;
+				};
+			}:
+		};
+	};
+};
+
+Example with SoC without integrated PHY
+
+emac: ethernet@1c0b000 {
+	compatible = "allwinner,sun8i-a83t-emac";
+	syscon = <&syscon>;
+	reg = <0x01c0b000 0x104>;
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "macirq";
+	resets = <&ccu RST_BUS_EMAC>;
+	reset-names = "stmmaceth";
+	clocks = <&ccu CLK_BUS_EMAC>;
+	clock-names = "stmmaceth";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
 	mdio: mdio {
+		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		int_mii_phy: ethernet-phy@1 {
+		ext_rgmii_phy: ethernet-phy@1 {
 			reg = <1>;
-			clocks = <&ccu CLK_BUS_EPHY>;
-			resets = <&ccu RST_BUS_EPHY>;
 		};
 	};
 };
-- 
2.13.5

[PATCH v6 06/11] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac

[Corentin Labbe]

Since dwmac-sun8i could use either an integrated PHY or an external PHY
(which could be at same MDIO address), we need to represent this selection
by a MDIO switch.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 3b7d953429a6..a8e9b8f378ba 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -422,14 +422,33 @@
 			#size-cells = <0>;
 			status = "disabled";
 
-			mdio: mdio {
+			mdio0: mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				int_mii_phy: ethernet-phy@1 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <1>;
-					clocks = <&ccu CLK_BUS_EPHY>;
-					resets = <&ccu RST_BUS_EPHY>;
+				compatible = "snps,dwmac-mdio";
+
+				mdio-mux {
+					compatible = "mdio-mux";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					/* Only one MDIO is usable at the time */
+					internal_mdio: mdio@1 {
+						reg = <1>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						int_mii_phy: ethernet-phy@1 {
+							compatible = "ethernet-phy-ieee802.3-c22";
+							reg = <1>;
+							clocks = <&ccu CLK_BUS_EPHY>;
+							resets = <&ccu RST_BUS_EPHY>;
+							phy-is-integrated;
+						};
+					};
+					mdio: mdio@2 {
+						reg = <2>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
 				};
 			};
 		};
-- 
2.13.5

[PATCH v6 07/11] arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio

[Corentin Labbe]

stmmac bindings docs said that its mdio node must have
compatible = "snps,dwmac-mdio";
Since dwmac-sun8i does not have any good reasons to not doing it, all
their MDIO node must have it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 75494cd90e40..e30476f05802 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -517,6 +517,7 @@
 			#size-cells = <0>;
 
 			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-- 
2.13.5

[PATCH v6 08/11] net: stmmac: snps,dwmac-mdio MDIOs are automatically registered

[Corentin Labbe]

stmmac bindings docs said that its mdio node must have
compatible = "snps,dwmac-mdio";
Since dwmac-sun8i does not have any good reasons to not doing it, all
their MDIO node must have it.

Since these compatible is automatically registered, dwmac-sun8i compatible
does not need to be in need_mdio_ids.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 8a280b48e3a9..9e616da0745d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -311,10 +311,6 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
 	bool mdio = true;
 	static const struct of_device_id need_mdio_ids[] = {
 		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
-		{ .compatible = "allwinner,sun8i-a83t-emac" },
-		{ .compatible = "allwinner,sun8i-h3-emac" },
-		{ .compatible = "allwinner,sun8i-v3s-emac" },
-		{ .compatible = "allwinner,sun50i-a64-emac" },
 		{},
 	};
 
-- 
2.13.5

[PATCH v6 09/11] net: stmmac: dwmac-sun8i: choose internal PHY via phy-is-integrated

[Corentin Labbe]

The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.

This patch adds a new way to find if the PHY is internal, via
the phy-is-integrated property.

Since the internal_phy variable does not need anymore to contain the xMII mode
used by the internal PHY, it is still used for knowing the presence of an
internal PHY, so it is modified to a boolean soc_has_internal_phy.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index fffd6d5fc907..672553b652bd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -41,14 +41,14 @@
  *				This value is used for disabling properly EMAC
  *				and used as a good starting value in case of the
  *				boot process(uboot) leave some stuff.
- * @internal_phy:		Does the MAC embed an internal PHY
+ * @soc_has_internal_phy:	Does the MAC embed an internal PHY
  * @support_mii:		Does the MAC handle MII
  * @support_rmii:		Does the MAC handle RMII
  * @support_rgmii:		Does the MAC handle RGMII
  */
 struct emac_variant {
 	u32 default_syscon_value;
-	int internal_phy;
+	bool soc_has_internal_phy;
 	bool support_mii;
 	bool support_rmii;
 	bool support_rgmii;
@@ -75,7 +75,7 @@ struct sunxi_priv_data {
 
 static const struct emac_variant emac_variant_h3 = {
 	.default_syscon_value = 0x58000,
-	.internal_phy = PHY_INTERFACE_MODE_MII,
+	.soc_has_internal_phy = true,
 	.support_mii = true,
 	.support_rmii = true,
 	.support_rgmii = true
@@ -83,20 +83,20 @@ static const struct emac_variant emac_variant_h3 = {
 
 static const struct emac_variant emac_variant_v3s = {
 	.default_syscon_value = 0x38000,
-	.internal_phy = PHY_INTERFACE_MODE_MII,
+	.soc_has_internal_phy = true,
 	.support_mii = true
 };
 
 static const struct emac_variant emac_variant_a83t = {
 	.default_syscon_value = 0,
-	.internal_phy = 0,
+	.soc_has_internal_phy = false,
 	.support_mii = true,
 	.support_rgmii = true
 };
 
 static const struct emac_variant emac_variant_a64 = {
 	.default_syscon_value = 0,
-	.internal_phy = 0,
+	.soc_has_internal_phy = false,
 	.support_mii = true,
 	.support_rmii = true,
 	.support_rgmii = true
@@ -648,7 +648,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 			 "Current syscon value is not the default %x (expect %x)\n",
 			 val, reg);
 
-	if (gmac->variant->internal_phy) {
+	if (gmac->variant->soc_has_internal_phy) {
 		if (!gmac->use_internal_phy) {
 			/* switch to external PHY interface */
 			reg &= ~H3_EPHY_SELECT;
@@ -932,7 +932,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	}
 
 	plat_dat->interface = of_get_phy_mode(dev->of_node);
-	if (plat_dat->interface == gmac->variant->internal_phy) {
+	if (of_property_read_bool(plat_dat->phy_node, "phy-is-integrated")) {
 		dev_info(&pdev->dev, "Will use internal PHY\n");
 		gmac->use_internal_phy = true;
 		gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
-- 
2.13.5

[PATCH v6 10/11] net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs

[Corentin Labbe]

The Allwinner H3 SoC have two distinct MDIO bus, only one could be
active at the same time.
The selection of the active MDIO bus are done via some bits in the EMAC
register of the system controller.

This patch implement this MDIO switch via a custom MDIO-mux.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 116 +++++++++++++++++++---
 2 files changed, 104 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 97035766c291..e28c0d2c58e9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -159,6 +159,7 @@ config DWMAC_SUN8I
 	tristate "Allwinner sun8i GMAC support"
 	default ARCH_SUNXI
 	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
+	select MDIO_BUS_MUX
 	---help---
 	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 672553b652bd..8bd500c351b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/mdio-mux.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -71,6 +72,7 @@ struct sunxi_priv_data {
 	const struct emac_variant *variant;
 	struct regmap *regmap;
 	bool use_internal_phy;
+	void *mux_handle;
 };
 
 static const struct emac_variant emac_variant_h3 = {
@@ -195,6 +197,9 @@ static const struct emac_variant emac_variant_a64 = {
 #define H3_EPHY_LED_POL		BIT(17) /* 1: active low, 0: active high */
 #define H3_EPHY_SHUTDOWN	BIT(16) /* 1: shutdown, 0: power up */
 #define H3_EPHY_SELECT		BIT(15) /* 1: internal PHY, 0: external PHY */
+#define H3_EPHY_MUX_MASK	(H3_EPHY_SHUTDOWN | H3_EPHY_SELECT)
+#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID	1
+#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID	2
 
 /* H3/A64 specific bits */
 #define SYSCON_RMII_EN		BIT(13) /* 1: enable RMII (overrides EPIT) */
@@ -634,6 +639,76 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
 	return 0;
 }
 
+/* MDIO multiplexing switch function
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
+ * multiplexer needs to switch.
+ * 'current_child' is the current value of the mux register
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
+ * node.
+ * The first time this function is called, current_child == -1.
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ *
+ * Note that we do not use reg/mask like mdio-mux-mmioreg because we need to
+ * know easily which bus is used (reset must be done only for desired bus).
+ */
+static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
+				     void *data)
+{
+	struct stmmac_priv *priv = data;
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+	u32 reg, val;
+	int ret = 0;
+	bool need_reset = false;
+
+	if (current_child ^ desired_child) {
+		regmap_read(gmac->regmap, SYSCON_EMAC_REG, &reg);
+		switch (desired_child) {
+		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
+			dev_info(priv->device, "Switch mux to internal PHY");
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
+			if (gmac->use_internal_phy)
+				need_reset = true;
+			break;
+		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
+			dev_info(priv->device, "Switch mux to external PHY");
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
+			if (!gmac->use_internal_phy)
+				need_reset = true;
+			break;
+		default:
+			dev_err(priv->device, "Invalid child id %x\n", desired_child);
+			return -EINVAL;
+		}
+		regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
+		/* After changing syscon value, the MAC need reset or it will use
+		 * the last value (and so the last PHY set).
+		 * Reset is necessary only when we reach the needed MDIO,
+		 * it timeout in other case.
+		 */
+		if (need_reset)
+			ret = sun8i_dwmac_reset(priv);
+		else
+			dev_dbg(priv->device, "skipped reset\n");
+	}
+	return ret;
+}
+
+static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv)
+{
+	int ret;
+	struct device_node *mdio_mux;
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+
+	mdio_mux = of_get_child_by_name(priv->plat->mdio_node, "mdio-mux");
+	if (!mdio_mux)
+		return -ENODEV;
+
+	ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn,
+			    &gmac->mux_handle, priv, priv->mii);
+	return ret;
+}
+
 static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 {
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
@@ -649,12 +724,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 			 val, reg);
 
 	if (gmac->variant->soc_has_internal_phy) {
-		if (!gmac->use_internal_phy) {
-			/* switch to external PHY interface */
-			reg &= ~H3_EPHY_SELECT;
-		} else {
-			reg |= H3_EPHY_SELECT;
-			reg &= ~H3_EPHY_SHUTDOWN;
+		if (gmac->use_internal_phy) {
 			dev_dbg(priv->device, "Select internal_phy %x\n", reg);
 
 			if (of_property_read_bool(priv->plat->phy_node,
@@ -743,6 +813,8 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
 {
 	u32 reg = gmac->variant->default_syscon_value;
 
+	if (gmac->variant->soc_has_internal_phy && gmac->mux_handle)
+		mdio_mux_uninit(gmac->mux_handle);
 	regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
 }
 
@@ -801,12 +873,6 @@ static int sun8i_power_phy(struct stmmac_priv *priv)
 	if (ret)
 		return ret;
 
-	/* After changing syscon value, the MAC need reset or it will use
-	 * the last value (and so the last PHY set.
-	 */
-	ret = sun8i_dwmac_reset(priv);
-	if (ret)
-		return ret;
 	return 0;
 }
 
@@ -889,6 +955,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	struct sunxi_priv_data *gmac;
 	struct device *dev = &pdev->dev;
 	int ret;
+	struct stmmac_priv *priv;
+	struct net_device *ndev;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
@@ -973,9 +1041,31 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
-		sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
+		goto dwmac_exit;
+
+	ndev = dev_get_drvdata(&pdev->dev);
+	priv = netdev_priv(ndev);
+	/* The mux must be registered after parent MDIO
+	 * so after stmmac_dvr_probe()
+	 */
+	if (gmac->variant->soc_has_internal_phy) {
+		ret = sun8i_dwmac_register_mdio_mux(priv);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to register mux\n");
+			goto dwmac_mux;
+		}
+	} else {
+		ret = sun8i_dwmac_reset(priv);
+		if (ret)
+			goto dwmac_exit;
+	}
 
 	return ret;
+dwmac_mux:
+	sun8i_dwmac_unset_syscon(gmac);
+dwmac_exit:
+	sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
+return ret;
 }
 
 static const struct of_device_id sun8i_dwmac_match[] = {
-- 
2.13.5

[PATCH v6 11/11] of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

[Corentin Labbe]

Each child node of an MDIO node is scanned as a PHY when calling
of_mdiobus_register() givint the following result:
[   18.175379] mdio_bus stmmac-0: /soc/ethernet@1c30000/mdio/mdio-mux has invalid PHY address
[   18.175408] mdio_bus stmmac-0: scan phy mdio-mux at address 0
[   18.175450] mdio_bus stmmac-0: scan phy mdio-mux at address 1
[...]
[   18.176420] mdio_bus stmmac-0: scan phy mdio-mux at address 30
[   18.176452] mdio_bus stmmac-0: scan phy mdio-mux at address 31

Since mdio-mux nodes are not PHY, this patch a way to to not scan
them.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 drivers/of/of_mdio.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index d94dd8b77abd..d90ddb0d90f2 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -190,6 +190,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 	struct device_node *child;
 	bool scanphys = false;
 	int addr, rc;
+	static const struct of_device_id do_not_scan[] = {
+		{ .compatible = "mdio-mux" },
+		{}
+	};
 
 	/* Do not continue if the node is disabled */
 	if (!of_device_is_available(np))
@@ -212,6 +216,9 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 
 	/* Loop over the child nodes and register a phy_device for each phy */
 	for_each_available_child_of_node(np, child) {
+		if (of_match_node(do_not_scan, child))
+			continue;
+
 		addr = of_mdio_parse_addr(&mdio->dev, child);
 		if (addr < 0) {
 			scanphys = true;
@@ -229,6 +236,9 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 
 	/* auto scan for PHYs with empty reg property */
 	for_each_available_child_of_node(np, child) {
+		if (of_match_node(do_not_scan, child))
+			continue;
+
 		/* Skip PHYs with reg property set */
 		if (of_find_property(child, "reg", NULL))
 			continue;
-- 
2.13.5

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 391 bytes --]

Hi,

On Wed, Sep 27, 2017 at 07:34:08AM +0000, Corentin Labbe wrote:
> This patch add documentation about the MDIO switch used on sun8i-h3-emac
> for integrated PHY.
> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>

This should be squashed with patch 1.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH v6 06/11] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1852 bytes --]

On Wed, Sep 27, 2017 at 07:34:09AM +0000, Corentin Labbe wrote:
> Since dwmac-sun8i could use either an integrated PHY or an external PHY
> (which could be at same MDIO address), we need to represent this selection
> by a MDIO switch.
> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++------
>  1 file changed, 25 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 3b7d953429a6..a8e9b8f378ba 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -422,14 +422,33 @@
>  			#size-cells = <0>;
>  			status = "disabled";
>  
> -			mdio: mdio {
> +			mdio0: mdio {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> -				int_mii_phy: ethernet-phy@1 {
> -					compatible = "ethernet-phy-ieee802.3-c22";
> -					reg = <1>;
> -					clocks = <&ccu CLK_BUS_EPHY>;
> -					resets = <&ccu RST_BUS_EPHY>;
> +				compatible = "snps,dwmac-mdio";
> +
> +				mdio-mux {
> +					compatible = "mdio-mux";
> +					#address-cells = <1>;
> +					#size-cells = <0>;

Newline

> +					/* Only one MDIO is usable at the time */
> +					internal_mdio: mdio@1 {
> +						reg = <1>;
> +						#address-cells = <1>;
> +						#size-cells = <0>;

Newline

> +						int_mii_phy: ethernet-phy@1 {
> +							compatible = "ethernet-phy-ieee802.3-c22";
> +							reg = <1>;
> +							clocks = <&ccu CLK_BUS_EPHY>;
> +							resets = <&ccu RST_BUS_EPHY>;
> +							phy-is-integrated;
> +						};
> +					};

Newline

> +					mdio: mdio@2 {

This is quite confusing. Why not call the label external_mdio?

Thanks

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re: [PATCH v6 06/11] ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac

[Corentin Labbe]

On Wed, Sep 27, 2017 at 12:16:22PM +0200, Maxime Ripard wrote:
> On Wed, Sep 27, 2017 at 07:34:09AM +0000, Corentin Labbe wrote:
> > Since dwmac-sun8i could use either an integrated PHY or an external PHY
> > (which could be at same MDIO address), we need to represent this selection
> > by a MDIO switch.
> > 
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> >  arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++------
> >  1 file changed, 25 insertions(+), 6 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > index 3b7d953429a6..a8e9b8f378ba 100644
> > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > @@ -422,14 +422,33 @@
> >  			#size-cells = <0>;
> >  			status = "disabled";
> >  
> > -			mdio: mdio {
> > +			mdio0: mdio {
> >  				#address-cells = <1>;
> >  				#size-cells = <0>;
> > -				int_mii_phy: ethernet-phy@1 {
> > -					compatible = "ethernet-phy-ieee802.3-c22";
> > -					reg = <1>;
> > -					clocks = <&ccu CLK_BUS_EPHY>;
> > -					resets = <&ccu RST_BUS_EPHY>;
> > +				compatible = "snps,dwmac-mdio";
> > +
> > +				mdio-mux {
> > +					compatible = "mdio-mux";
> > +					#address-cells = <1>;
> > +					#size-cells = <0>;
> 
> Newline
> 
> > +					/* Only one MDIO is usable at the time */
> > +					internal_mdio: mdio@1 {
> > +						reg = <1>;
> > +						#address-cells = <1>;
> > +						#size-cells = <0>;
> 
> Newline
> 
> > +						int_mii_phy: ethernet-phy@1 {
> > +							compatible = "ethernet-phy-ieee802.3-c22";
> > +							reg = <1>;
> > +							clocks = <&ccu CLK_BUS_EPHY>;
> > +							resets = <&ccu RST_BUS_EPHY>;
> > +							phy-is-integrated;
> > +						};
> > +					};
> 
> Newline
> 
> > +					mdio: mdio@2 {
> 
> This is quite confusing. Why not call the label external_mdio?
> 

I will do it. (at origin I was not changing it for limiting changes on board with external PHY, but now all DT are reverted, it will be easy)

Regards

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Andrew Lunn]

Hi Corentin

> +Required properties for the mdio-mux node:
> +  - compatible = "mdio-mux"

This is too generic. Please add a more specific compatible for this
particular mux. You can keep "mdio-mux", since that is what the MDIO
subsystem will look for.

> +Required properties of the integrated phy node:
>  - clocks: a phandle to the reference clock for the EPHY
>  - resets: a phandle to the reset control for the EPHY
> +- phy-is-integrated

So the last thing you said is that the mux is not the problem
here. Something else is locking up. Did you discover what?

I really would like phy-is-integrated to go away.

  Andrew

Re: [PATCH v6 11/11] of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

[Andrew Lunn]

On Wed, Sep 27, 2017 at 09:34:14AM +0200, Corentin Labbe wrote:
> Each child node of an MDIO node is scanned as a PHY when calling
> of_mdiobus_register() givint the following result:
> [   18.175379] mdio_bus stmmac-0: /soc/ethernet@1c30000/mdio/mdio-mux has invalid PHY address
> [   18.175408] mdio_bus stmmac-0: scan phy mdio-mux at address 0
> [   18.175450] mdio_bus stmmac-0: scan phy mdio-mux at address 1
> [...]
> [   18.176420] mdio_bus stmmac-0: scan phy mdio-mux at address 30
> [   18.176452] mdio_bus stmmac-0: scan phy mdio-mux at address 31
> 
> Since mdio-mux nodes are not PHY, this patch a way to to not scan
> them.

Hi Corentin

I still don't like this, but ...

> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  drivers/of/of_mdio.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index d94dd8b77abd..d90ddb0d90f2 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -190,6 +190,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
>  	struct device_node *child;
>  	bool scanphys = false;
>  	int addr, rc;
> +	static const struct of_device_id do_not_scan[] = {
> +		{ .compatible = "mdio-mux" },
> +		{}
> +	};

Please rename this to some less generic. What i don't want is other
compatible strings added here. We want to make the exception for
muxes, but nothing else. So something like compatible_muxes?

       Andrew

Re: [PATCH v6 11/11] of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

[Florian Fainelli]

On 09/27/2017 07:12 AM, Andrew Lunn wrote:
> On Wed, Sep 27, 2017 at 09:34:14AM +0200, Corentin Labbe wrote:
>> Each child node of an MDIO node is scanned as a PHY when calling
>> of_mdiobus_register() givint the following result:
>> [   18.175379] mdio_bus stmmac-0: /soc/ethernet@1c30000/mdio/mdio-mux has invalid PHY address
>> [   18.175408] mdio_bus stmmac-0: scan phy mdio-mux at address 0
>> [   18.175450] mdio_bus stmmac-0: scan phy mdio-mux at address 1
>> [...]
>> [   18.176420] mdio_bus stmmac-0: scan phy mdio-mux at address 30
>> [   18.176452] mdio_bus stmmac-0: scan phy mdio-mux at address 31
>>
>> Since mdio-mux nodes are not PHY, this patch a way to to not scan
>> them.
> 
> Hi Corentin
> 
> I still don't like this, but ...

Me neither, even more so as I don't understand the reasoning behind
putting the mux as a child node of the MDIO bus controller in the first
place.

Also, you need to re-order patches such that this patch comes before the
DTS changes.

> 
>>
>> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
>> ---
>>  drivers/of/of_mdio.c | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
>> index d94dd8b77abd..d90ddb0d90f2 100644
>> --- a/drivers/of/of_mdio.c
>> +++ b/drivers/of/of_mdio.c
>> @@ -190,6 +190,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
>>  	struct device_node *child;
>>  	bool scanphys = false;
>>  	int addr, rc;
>> +	static const struct of_device_id do_not_scan[] = {
>> +		{ .compatible = "mdio-mux" },
>> +		{}
>> +	};
> 
> Please rename this to some less generic. What i don't want is other
> compatible strings added here. We want to make the exception for
> muxes, but nothing else. So something like compatible_muxes?
> 
>        Andrew
> 

-- 
Florian

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Florian Fainelli]

On 09/27/2017 12:34 AM, Corentin Labbe wrote:
> This patch add documentation about the MDIO switch used on sun8i-h3-emac
> for integrated PHY.
> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  .../devicetree/bindings/net/dwmac-sun8i.txt        | 138 +++++++++++++++++++--
>  1 file changed, 126 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> index 725f3b187886..e2ef4683df08 100644
> --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> @@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
>  Please see stmmac.txt for the other unchanged properties.
>  
>  Required properties:
> -- compatible: should be one of the following string:
> +- compatible: must be one of the following string:
>  		"allwinner,sun8i-a83t-emac"
>  		"allwinner,sun8i-h3-emac"
>  		"allwinner,sun8i-v3s-emac"
>  		"allwinner,sun50i-a64-emac"
>  - reg: address and length of the register for the device.
>  - interrupts: interrupt for the device
> -- interrupt-names: should be "macirq"
> +- interrupt-names: must be "macirq"
>  - clocks: A phandle to the reference clock for this device
> -- clock-names: should be "stmmaceth"
> +- clock-names: must be "stmmaceth"
>  - resets: A phandle to the reset control for this device
> -- reset-names: should be "stmmaceth"
> +- reset-names: must be "stmmaceth"
>  - phy-mode: See ethernet.txt
>  - phy-handle: See ethernet.txt
>  - #address-cells: shall be 1
> @@ -39,23 +39,38 @@ Optional properties for the following compatibles:
>  - allwinner,leds-active-low: EPHY LEDs are active low
>  
>  Required child node of emac:
> -- mdio bus node: should be named mdio
> +- mdio bus node: with compatible "snps,dwmac-mdio"
>  
>  Required properties of the mdio node:
>  - #address-cells: shall be 1
>  - #size-cells: shall be 0
>  
> -The device node referenced by "phy" or "phy-handle" should be a child node
> +The device node referenced by "phy" or "phy-handle" must be a child node
>  of the mdio node. See phy.txt for the generic PHY bindings.
>  
> -Required properties of the phy node with the following compatibles:
> +The following compatibles require that the mdio node have a mdio-mux child
> +node called "mdio-mux":
> +  - "allwinner,sun8i-h3-emac"
> +  - "allwinner,sun8i-v3s-emac":
> +Required properties for the mdio-mux node:
> +  - compatible = "mdio-mux"
> +  - one child mdio for the integrated mdio
> +  - one child mdio for the external mdio if present (V3s have none)
> +Required properties for the mdio-mux children node:
> +  - reg: 1 for internal MDIO bus, 2 for external MDIO bus
> +
> +The following compatibles require a PHY node representing the integrated
> +PHY, under the integrated MDIO bus node if an mdio-mux node is used:
>    - "allwinner,sun8i-h3-emac",
>    - "allwinner,sun8i-v3s-emac":
> +
> +Required properties of the integrated phy node:
>  - clocks: a phandle to the reference clock for the EPHY
>  - resets: a phandle to the reset control for the EPHY
> +- phy-is-integrated
> +- Must be a child of the integrated mdio
>  
> -Example:
> -
> +Example with integrated PHY:
>  emac: ethernet@1c0b000 {
>  	compatible = "allwinner,sun8i-h3-emac";
>  	syscon = <&syscon>;
> @@ -72,13 +87,112 @@ emac: ethernet@1c0b000 {
>  	phy-handle = <&int_mii_phy>;
>  	phy-mode = "mii";
>  	allwinner,leds-active-low;
> +
> +	mdio0: mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +
> +		mdio-mux {
> +			compatible = "mdio-mux";
> +			#address-cells = <1>;
> +			#size-cells = <0>;

Sorry for chiming in so late, but why don't we have the mdio-mux be the
root node here in the mdio bus hierarchy? I understand that with this
binding proposed here, we need to have patch 11 included (which btw,
should come before any DTS change), but this does not seem to accurately
model the HW.

The mux itself is not a child node of the MDIO bus controller, it does
not really belong in that address space although it does mangle the MDIO
bus controller address space between the two ends of the mux.

If this has been debated before, apologies for missing that part of the
discussion.

> +
> +			int_mdio: mdio@1 {
> +				reg = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				int_mii_phy: ethernet-phy@1 {
> +					reg = <1>;
> +					clocks = <&ccu CLK_BUS_EPHY>;
> +					resets = <&ccu RST_BUS_EPHY>;
> +					phy-is-integrated;
> +				};
> +			};
> +			ext_mdio: mdio@2 {
> +				reg = <2>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +Example with external PHY:
> +emac: ethernet@1c0b000 {
> +	compatible = "allwinner,sun8i-h3-emac";
> +	syscon = <&syscon>;
> +	reg = <0x01c0b000 0x104>;
> +	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +	interrupt-names = "macirq";
> +	resets = <&ccu RST_BUS_EMAC>;
> +	reset-names = "stmmaceth";
> +	clocks = <&ccu CLK_BUS_EMAC>;
> +	clock-names = "stmmaceth";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	phy-handle = <&ext_rgmii_phy>;
> +	phy-mode = "rgmii";
> +	allwinner,leds-active-low;
> +
> +	mdio0: mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +
> +		mdio-mux {
> +			compatible = "mdio-mux";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			int_mdio: mdio@1 {
> +				reg = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				int_mii_phy: ethernet-phy@1 {
> +					reg = <1>;
> +					clocks = <&ccu CLK_BUS_EPHY>;
> +					resets = <&ccu RST_BUS_EPHY>;
> +					phy-is-integrated;
> +				};
> +			};
> +			ext_mdio: mdio@2 {
> +				reg = <2>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				ext_rgmii_phy: ethernet-phy@1 {
> +					reg = <1>;
> +				};
> +			}:
> +		};
> +	};
> +};
> +
> +Example with SoC without integrated PHY
> +
> +emac: ethernet@1c0b000 {
> +	compatible = "allwinner,sun8i-a83t-emac";
> +	syscon = <&syscon>;
> +	reg = <0x01c0b000 0x104>;
> +	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +	interrupt-names = "macirq";
> +	resets = <&ccu RST_BUS_EMAC>;
> +	reset-names = "stmmaceth";
> +	clocks = <&ccu CLK_BUS_EMAC>;
> +	clock-names = "stmmaceth";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	phy-handle = <&ext_rgmii_phy>;
> +	phy-mode = "rgmii";
> +
>  	mdio: mdio {
> +		compatible = "snps,dwmac-mdio";
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> -		int_mii_phy: ethernet-phy@1 {
> +		ext_rgmii_phy: ethernet-phy@1 {
>  			reg = <1>;
> -			clocks = <&ccu CLK_BUS_EPHY>;
> -			resets = <&ccu RST_BUS_EPHY>;
>  		};
>  	};
>  };
> 

-- 
Florian

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe]

On Wed, Sep 27, 2017 at 09:53:15PM -0700, Florian Fainelli wrote:
> 
> 
> On 09/27/2017 12:34 AM, Corentin Labbe wrote:
> > This patch add documentation about the MDIO switch used on sun8i-h3-emac
> > for integrated PHY.
> > 
> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> > ---
> >  .../devicetree/bindings/net/dwmac-sun8i.txt        | 138 +++++++++++++++++++--
> >  1 file changed, 126 insertions(+), 12 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> > index 725f3b187886..e2ef4683df08 100644
> > --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> > +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> > @@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
> >  Please see stmmac.txt for the other unchanged properties.
> >  
> >  Required properties:
> > -- compatible: should be one of the following string:
> > +- compatible: must be one of the following string:
> >  		"allwinner,sun8i-a83t-emac"
> >  		"allwinner,sun8i-h3-emac"
> >  		"allwinner,sun8i-v3s-emac"
> >  		"allwinner,sun50i-a64-emac"
> >  - reg: address and length of the register for the device.
> >  - interrupts: interrupt for the device
> > -- interrupt-names: should be "macirq"
> > +- interrupt-names: must be "macirq"
> >  - clocks: A phandle to the reference clock for this device
> > -- clock-names: should be "stmmaceth"
> > +- clock-names: must be "stmmaceth"
> >  - resets: A phandle to the reset control for this device
> > -- reset-names: should be "stmmaceth"
> > +- reset-names: must be "stmmaceth"
> >  - phy-mode: See ethernet.txt
> >  - phy-handle: See ethernet.txt
> >  - #address-cells: shall be 1
> > @@ -39,23 +39,38 @@ Optional properties for the following compatibles:
> >  - allwinner,leds-active-low: EPHY LEDs are active low
> >  
> >  Required child node of emac:
> > -- mdio bus node: should be named mdio
> > +- mdio bus node: with compatible "snps,dwmac-mdio"
> >  
> >  Required properties of the mdio node:
> >  - #address-cells: shall be 1
> >  - #size-cells: shall be 0
> >  
> > -The device node referenced by "phy" or "phy-handle" should be a child node
> > +The device node referenced by "phy" or "phy-handle" must be a child node
> >  of the mdio node. See phy.txt for the generic PHY bindings.
> >  
> > -Required properties of the phy node with the following compatibles:
> > +The following compatibles require that the mdio node have a mdio-mux child
> > +node called "mdio-mux":
> > +  - "allwinner,sun8i-h3-emac"
> > +  - "allwinner,sun8i-v3s-emac":
> > +Required properties for the mdio-mux node:
> > +  - compatible = "mdio-mux"
> > +  - one child mdio for the integrated mdio
> > +  - one child mdio for the external mdio if present (V3s have none)
> > +Required properties for the mdio-mux children node:
> > +  - reg: 1 for internal MDIO bus, 2 for external MDIO bus
> > +
> > +The following compatibles require a PHY node representing the integrated
> > +PHY, under the integrated MDIO bus node if an mdio-mux node is used:
> >    - "allwinner,sun8i-h3-emac",
> >    - "allwinner,sun8i-v3s-emac":
> > +
> > +Required properties of the integrated phy node:
> >  - clocks: a phandle to the reference clock for the EPHY
> >  - resets: a phandle to the reset control for the EPHY
> > +- phy-is-integrated
> > +- Must be a child of the integrated mdio
> >  
> > -Example:
> > -
> > +Example with integrated PHY:
> >  emac: ethernet@1c0b000 {
> >  	compatible = "allwinner,sun8i-h3-emac";
> >  	syscon = <&syscon>;
> > @@ -72,13 +87,112 @@ emac: ethernet@1c0b000 {
> >  	phy-handle = <&int_mii_phy>;
> >  	phy-mode = "mii";
> >  	allwinner,leds-active-low;
> > +
> > +	mdio0: mdio {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		compatible = "snps,dwmac-mdio";
> > +
> > +		mdio-mux {
> > +			compatible = "mdio-mux";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> 
> Sorry for chiming in so late, but why don't we have the mdio-mux be the
> root node here in the mdio bus hierarchy? I understand that with this
> binding proposed here, we need to have patch 11 included (which btw,
> should come before any DTS change), but this does not seem to accurately
> model the HW.
> 
> The mux itself is not a child node of the MDIO bus controller, it does
> not really belong in that address space although it does mangle the MDIO
> bus controller address space between the two ends of the mux.
> 
> If this has been debated before, apologies for missing that part of the
> discussion.
> 

I have done it as asked by Rob.
https://lkml.org/lkml/2017/9/13/422
https://lkml.org/lkml/2017/9/19/849

Regards

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe]

On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> Hi Corentin
> 
> > +Required properties for the mdio-mux node:
> > +  - compatible = "mdio-mux"
> 
> This is too generic. Please add a more specific compatible for this
> particular mux. You can keep "mdio-mux", since that is what the MDIO
> subsystem will look for.
> 

I will add allwinner,sun8i-h3-mdio-mux

> > +Required properties of the integrated phy node:
> >  - clocks: a phandle to the reference clock for the EPHY
> >  - resets: a phandle to the reset control for the EPHY
> > +- phy-is-integrated
> 
> So the last thing you said is that the mux is not the problem
> here. Something else is locking up. Did you discover what?
> 
> I really would like phy-is-integrated to go away.
> 

I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
So we could remove phy-is-integrated by:
Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
But this means:
- getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
- doing some unnecessary tasks (enable/scan/disable) when external_phy is needed

Regards

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe]

On Thu, Sep 28, 2017 at 09:37:08AM +0200, Corentin Labbe wrote:
> On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> > Hi Corentin
> > 
> > > +Required properties for the mdio-mux node:
> > > +  - compatible = "mdio-mux"
> > 
> > This is too generic. Please add a more specific compatible for this
> > particular mux. You can keep "mdio-mux", since that is what the MDIO
> > subsystem will look for.
> > 
> 
> I will add allwinner,sun8i-h3-mdio-mux
> 
> > > +Required properties of the integrated phy node:
> > >  - clocks: a phandle to the reference clock for the EPHY
> > >  - resets: a phandle to the reset control for the EPHY
> > > +- phy-is-integrated
> > 
> > So the last thing you said is that the mux is not the problem
> > here. Something else is locking up. Did you discover what?
> > 
> > I really would like phy-is-integrated to go away.
> > 
> 
> I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
> So we could remove phy-is-integrated by:
> Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
> But this means:
> - getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
> - doing some unnecessary tasks (enable/scan/disable) when external_phy is needed
> 

Hello

I have get rid of phy-is-integrated, but mdio_mux_syscon_switch_fn need to enable/disable ephy clk/reset.
And so access to internal PHY node.
But current DT made this ugly: (need to find mdio-mux then internalmdio then internal PHY)

Since MAC cannot reset/choose internal MDIO without ephy clk/rst, could we interpret this as thoses clk/rst must be set in emac node.
This will simplify a lot the code.

Regards

Re: [PATCH v6 01/11] dt-bindings: net: Restore sun8i dwmac binding

[Rob Herring]

On Wed, Sep 27, 2017 at 09:34:04AM +0200, Corentin Labbe wrote:
> This patch restore dt-bindings documentation about dwmac-sun8i
> This reverts commit 8aa33ec2f481 ("dt-bindings: net: Revert sun8i dwmac binding")

What's missing here is why you are reverting?

> 
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
>  .../devicetree/bindings/net/dwmac-sun8i.txt        | 84 ++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt

Otherwise,

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 11/11] of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

[Rob Herring]

On Wed, Sep 27, 2017 at 09:50:46PM -0700, Florian Fainelli wrote:
> 
> 
> On 09/27/2017 07:12 AM, Andrew Lunn wrote:
> > On Wed, Sep 27, 2017 at 09:34:14AM +0200, Corentin Labbe wrote:
> >> Each child node of an MDIO node is scanned as a PHY when calling
> >> of_mdiobus_register() givint the following result:
> >> [   18.175379] mdio_bus stmmac-0: /soc/ethernet@1c30000/mdio/mdio-mux has invalid PHY address
> >> [   18.175408] mdio_bus stmmac-0: scan phy mdio-mux at address 0
> >> [   18.175450] mdio_bus stmmac-0: scan phy mdio-mux at address 1
> >> [...]
> >> [   18.176420] mdio_bus stmmac-0: scan phy mdio-mux at address 30
> >> [   18.176452] mdio_bus stmmac-0: scan phy mdio-mux at address 31
> >>
> >> Since mdio-mux nodes are not PHY, this patch a way to to not scan
> >> them.
> > 
> > Hi Corentin
> > 
> > I still don't like this, but ...
> 
> Me neither, even more so as I don't understand the reasoning behind
> putting the mux as a child node of the MDIO bus controller in the first
> place.

If no one agrees with me, then you shouldn't just accept my answers. I'm 
not always right.

Looking at this some more, why can't mdio-mux-mmio be used? Then there 
is nothing to review or discuss. If you want to extend that then make it 
clear this is just extending/inheriting already defined bindings.

That being said, if we were starting over I would probably do mux 
designs differently with DT hierarchy reflecting the mux hierarchy, but 
that ship has sailed.

Rob

Re: [PATCH v6 11/11] of: mdio: Prevent of_mdiobus_register from scanning mdio-mux nodes

[Andrew Lunn]

> Looking at this some more, why can't mdio-mux-mmio be used?

Hi Rob

That was my first thought. And then i dug into the details. The mux is
more than just a couple of bits in an address space. Clocks needs to
be enabled/disabled, and the MAC needs a reset, when the mux changes.
So the mux needs intimate knowledge of MAC.

   Andrew

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Corentin Labbe]

On Thu, Sep 28, 2017 at 09:37:08AM +0200, Corentin Labbe wrote:
> On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> > Hi Corentin
> > 
> > > +Required properties for the mdio-mux node:
> > > +  - compatible = "mdio-mux"
> > 
> > This is too generic. Please add a more specific compatible for this
> > particular mux. You can keep "mdio-mux", since that is what the MDIO
> > subsystem will look for.
> > 
> 
> I will add allwinner,sun8i-h3-mdio-mux
> 
> > > +Required properties of the integrated phy node:
> > >  - clocks: a phandle to the reference clock for the EPHY
> > >  - resets: a phandle to the reset control for the EPHY
> > > +- phy-is-integrated
> > 
> > So the last thing you said is that the mux is not the problem
> > here. Something else is locking up. Did you discover what?
> > 
> > I really would like phy-is-integrated to go away.
> > 
> 
> I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
> So we could remove phy-is-integrated by:
> Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
> But this means:
> - getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
> - doing some unnecessary tasks (enable/scan/disable) when external_phy is needed
> 
> Regards

Hello all

Below is the current patch, as you can read, it does not use anymore the phy-is-integrated property.
So now, the mdio-mux must always enable the internal mdio when switch_fn ask for it and so reset MAC and so need to enable ephy clk/reset.
But for this I need a reference to thoses clock and reset. (this is done in get_ephy_nodes)
The current version set those clock in mdio-mux node, and as you can see it is already ugly (lots of get next node),
if the clk/rst nodes were as it should be, in phy nodes, it will be more bad.

So, since the MAC have a dependency on thoses clk/rst nodes for doing reset(), I seek a proper way to get references on it.
OR do you agree that putting ephy clk/rst in emac is acceptable ?

thanks
regards

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/mdio-mux.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -41,14 +42,14 @@
  *				This value is used for disabling properly EMAC
  *				and used as a good starting value in case of the
  *				boot process(uboot) leave some stuff.
- * @internal_phy:		Does the MAC embed an internal PHY
+ * @soc_has_internal_phy:	Does the MAC embed an internal PHY
  * @support_mii:		Does the MAC handle MII
  * @support_rmii:		Does the MAC handle RMII
  * @support_rgmii:		Does the MAC handle RGMII
  */
 struct emac_variant {
 	u32 default_syscon_value;
-	int internal_phy;
+	bool soc_has_internal_phy;
 	bool support_mii;
 	bool support_rmii;
 	bool support_rgmii;
@@ -61,7 +62,7 @@ struct emac_variant {
  * @rst_ephy:	reference to the optional EPHY reset for the internal PHY
  * @variant:	reference to the current board variant
  * @regmap:	regmap for using the syscon
- * @use_internal_phy: Does the current PHY choice imply using the internal PHY
+ * @internal_phy_powered: Does the internal PHY is enabled
  */
 struct sunxi_priv_data {
 	struct clk *tx_clk;
@@ -70,12 +71,13 @@ struct sunxi_priv_data {
 	struct reset_control *rst_ephy;
 	const struct emac_variant *variant;
 	struct regmap *regmap;
-	bool use_internal_phy;
+	bool internal_phy_powered;
+	void *mux_handle;
 };
 
 static const struct emac_variant emac_variant_h3 = {
 	.default_syscon_value = 0x58000,
-	.internal_phy = PHY_INTERFACE_MODE_MII,
+	.soc_has_internal_phy = true,
 	.support_mii = true,
 	.support_rmii = true,
 	.support_rgmii = true
@@ -83,20 +85,20 @@ static const struct emac_variant emac_variant_h3 = {
 
 static const struct emac_variant emac_variant_v3s = {
 	.default_syscon_value = 0x38000,
-	.internal_phy = PHY_INTERFACE_MODE_MII,
+	.soc_has_internal_phy = true,
 	.support_mii = true
 };
 
 static const struct emac_variant emac_variant_a83t = {
 	.default_syscon_value = 0,
-	.internal_phy = 0,
+	.soc_has_internal_phy = false,
 	.support_mii = true,
 	.support_rgmii = true
 };
 
 static const struct emac_variant emac_variant_a64 = {
 	.default_syscon_value = 0,
-	.internal_phy = 0,
+	.soc_has_internal_phy = false,
 	.support_mii = true,
 	.support_rmii = true,
 	.support_rgmii = true
@@ -195,6 +197,9 @@ static const struct emac_variant emac_variant_a64 = {
 #define H3_EPHY_LED_POL		BIT(17) /* 1: active low, 0: active high */
 #define H3_EPHY_SHUTDOWN	BIT(16) /* 1: shutdown, 0: power up */
 #define H3_EPHY_SELECT		BIT(15) /* 1: internal PHY, 0: external PHY */
+#define H3_EPHY_MUX_MASK	(H3_EPHY_SHUTDOWN | H3_EPHY_SELECT)
+#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID	1
+#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID	2
 
 /* H3/A64 specific bits */
 #define SYSCON_RMII_EN		BIT(13) /* 1: enable RMII (overrides EPIT) */
@@ -634,6 +639,164 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv)
 	return 0;
 }
 
+static int get_ephy_nodes(struct stmmac_priv *priv)
+{
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+	struct device_node *mdio_mux;
+	struct device_node *mdio_internal;
+	int ret;
+
+	mdio_mux = of_get_child_by_name(priv->plat->mdio_node, "mdio-mux");
+	if (!mdio_mux) {
+		dev_err(priv->device, "Cannot get mdio-mux node\n");
+		return -ENODEV;
+	}
+
+	mdio_internal = of_find_compatible_node(mdio_mux, NULL,
+						"allwinner,sun8i-h3-mdio-internal");
+	if (!mdio_internal) {
+		dev_err(priv->device, "Cannot get internal_mdio node\n");
+		return -ENODEV;
+	}
+
+	/* insert here code to get child phynode */
+	gmac->ephy_clk = of_clk_get(mdio_internal, 0);
+	if (IS_ERR(gmac->ephy_clk)) {
+		ret = PTR_ERR(gmac->ephy_clk);
+		dev_err(priv->device, "Cannot get EPHY clock: %d\n", ret);
+		return -EINVAL;
+	}
+
+	/* Note that we cannot use devm_reset_control_get, since
+	 * the reset is not in the device node.
+	 */
+	gmac->rst_ephy = of_reset_control_get_exclusive(mdio_internal, NULL);
+	if (IS_ERR(gmac->rst_ephy)) {
+		ret = PTR_ERR(gmac->rst_ephy);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		dev_err(priv->device, "No EPHY reset control found %d\n", ret);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
+{
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+	int ret;
+
+	if (gmac->internal_phy_powered) {
+		dev_warn(priv->device, "Internal PHY already powered\n");
+		return 0;
+	}
+
+	dev_info(priv->device, "Powering internal PHY\n");
+	ret = clk_prepare_enable(gmac->ephy_clk);
+	if (ret) {
+		dev_err(priv->device, "Cannot enable internal PHY\n");
+		return ret;
+	}
+
+	/* Make sure the EPHY is properly reseted, as U-Boot may leave
+	 * it at deasserted state, and thus it may fail to reset EMAC.
+	 */
+	reset_control_assert(gmac->rst_ephy);
+
+	ret = reset_control_deassert(gmac->rst_ephy);
+	if (ret) {
+		dev_err(priv->device, "Cannot deassert internal phy\n");
+		clk_disable_unprepare(gmac->ephy_clk);
+		return ret;
+	}
+
+	gmac->internal_phy_powered = true;
+
+	return 0;
+}
+
+static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
+{
+	if (!gmac->internal_phy_powered)
+		return 0;
+
+	clk_disable_unprepare(gmac->ephy_clk);
+	reset_control_assert(gmac->rst_ephy);
+	gmac->internal_phy_powered = false;
+	return 0;
+}
+
+/* MDIO multiplexing switch function
+ * This function is called by the mdio-mux layer when it thinks the mdio bus
+ * multiplexer needs to switch.
+ * 'current_child' is the current value of the mux register
+ * 'desired_child' is the value of the 'reg' property of the target child MDIO
+ * node.
+ * The first time this function is called, current_child == -1.
+ * If current_child == desired_child, then the mux is already set to the
+ * correct bus.
+ *
+ * Note that we do not use reg/mask like mdio-mux-mmioreg because we need to
+ * know easily which bus is used (reset must be done only for desired bus).
+ */
+static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
+				     void *data)
+{
+	struct stmmac_priv *priv = data;
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+	u32 reg, val;
+	int ret = 0;
+	bool need_power_ephy = false;
+
+	if (current_child ^ desired_child) {
+		regmap_read(gmac->regmap, SYSCON_EMAC_REG, &reg);
+		switch (desired_child) {
+		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
+			dev_info(priv->device, "Switch mux to internal PHY");
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
+
+			need_power_ephy = true;
+			break;
+		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
+			dev_info(priv->device, "Switch mux to external PHY");
+			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
+			need_power_ephy = false;
+			break;
+		default:
+			dev_err(priv->device, "Invalid child ID %x\n",
+				desired_child);
+			return -EINVAL;
+		}
+		regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
+		if (need_power_ephy) {
+			ret = sun8i_dwmac_power_internal_phy(priv);
+			if (ret)
+				return ret;
+		} else {
+			sun8i_dwmac_unpower_internal_phy(gmac);
+		}
+		/* After changing syscon value, the MAC need reset or it will
+		 * use the last value (and so the last PHY set).
+		 */
+		ret = sun8i_dwmac_reset(priv);
+	}
+	return ret;
+}
+
+static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv)
+{
+	int ret;
+	struct device_node *mdio_mux;
+	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+
+	mdio_mux = of_get_child_by_name(priv->plat->mdio_node, "mdio-mux");
+	if (!mdio_mux)
+		return -ENODEV;
+
+	ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn,
+			    &gmac->mux_handle, priv, priv->mii);
+	return ret;
+}
+
 static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 {
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
@@ -648,35 +811,25 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 			 "Current syscon value is not the default %x (expect %x)\n",
 			 val, reg);
 
-	if (gmac->variant->internal_phy) {
-		if (!gmac->use_internal_phy) {
-			/* switch to external PHY interface */
-			reg &= ~H3_EPHY_SELECT;
-		} else {
-			reg |= H3_EPHY_SELECT;
-			reg &= ~H3_EPHY_SHUTDOWN;
-			dev_dbg(priv->device, "Select internal_phy %x\n", reg);
-
-			if (of_property_read_bool(priv->plat->phy_node,
-						  "allwinner,leds-active-low"))
-				reg |= H3_EPHY_LED_POL;
-			else
-				reg &= ~H3_EPHY_LED_POL;
-
-			/* Force EPHY xtal frequency to 24MHz. */
-			reg |= H3_EPHY_CLK_SEL;
-
-			ret = of_mdio_parse_addr(priv->device,
-						 priv->plat->phy_node);
-			if (ret < 0) {
-				dev_err(priv->device, "Could not parse MDIO addr\n");
-				return ret;
-			}
-			/* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
-			 * address. No need to mask it again.
-			 */
-			reg |= ret << H3_EPHY_ADDR_SHIFT;
+	if (gmac->variant->soc_has_internal_phy) {
+		if (of_property_read_bool(priv->plat->phy_node,
+					  "allwinner,leds-active-low"))
+			reg |= H3_EPHY_LED_POL;
+		else
+			reg &= ~H3_EPHY_LED_POL;
+
+		/* Force EPHY xtal frequency to 24MHz. */
+		reg |= H3_EPHY_CLK_SEL;
+
+		ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node);
+		if (ret < 0) {
+			dev_err(priv->device, "Could not parse MDIO addr\n");
+			return ret;
 		}
+		/* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
+		 * address. No need to mask it again.
+		 */
+		reg |= 1 << H3_EPHY_ADDR_SHIFT;
 	}
 
 	if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
@@ -746,81 +899,21 @@ static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac)
 	regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
 }
 
-static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
+static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
 {
-	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
-	int ret;
-
-	if (!gmac->use_internal_phy)
-		return 0;
-
-	ret = clk_prepare_enable(gmac->ephy_clk);
-	if (ret) {
-		dev_err(priv->device, "Cannot enable ephy\n");
-		return ret;
-	}
-
-	/* Make sure the EPHY is properly reseted, as U-Boot may leave
-	 * it at deasserted state, and thus it may fail to reset EMAC.
-	 */
-	reset_control_assert(gmac->rst_ephy);
+	struct sunxi_priv_data *gmac = priv;
 
-	ret = reset_control_deassert(gmac->rst_ephy);
-	if (ret) {
-		dev_err(priv->device, "Cannot deassert ephy\n");
-		clk_disable_unprepare(gmac->ephy_clk);
-		return ret;
+	if (gmac->variant->soc_has_internal_phy) {
+		/* sun8i_dwmac_exit could be called with mdiomux uninit */
+		if (gmac->mux_handle)
+			mdio_mux_uninit(gmac->mux_handle);
+		if (gmac->internal_phy_powered)
+			sun8i_dwmac_unpower_internal_phy(gmac);
 	}
 
-	return 0;
-}
-
-static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
-{
-	if (!gmac->use_internal_phy)
-		return 0;
-
-	clk_disable_unprepare(gmac->ephy_clk);
-	reset_control_assert(gmac->rst_ephy);
-	return 0;
-}
-
-/* sun8i_power_phy() - Activate the PHY:
- * In case of error, no need to call sun8i_unpower_phy(),
- * it will be called anyway by sun8i_dwmac_exit()
- */
-static int sun8i_power_phy(struct stmmac_priv *priv)
-{
-	int ret;
-
-	ret = sun8i_dwmac_power_internal_phy(priv);
-	if (ret)
-		return ret;
-
-	ret = sun8i_dwmac_set_syscon(priv);
-	if (ret)
-		return ret;
-
-	/* After changing syscon value, the MAC need reset or it will use
-	 * the last value (and so the last PHY set.
-	 */
-	ret = sun8i_dwmac_reset(priv);
-	if (ret)
-		return ret;
-	return 0;
-}
-
-static void sun8i_unpower_phy(struct sunxi_priv_data *gmac)
-{
 	sun8i_dwmac_unset_syscon(gmac);
-	sun8i_dwmac_unpower_internal_phy(gmac);
-}
 
-static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
-{
-	struct sunxi_priv_data *gmac = priv;
-
-	sun8i_unpower_phy(gmac);
+	reset_control_put(gmac->rst_ephy);
 
 	clk_disable_unprepare(gmac->tx_clk);
 
@@ -849,7 +942,7 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
 	if (!mac)
 		return NULL;
 
-	ret = sun8i_power_phy(priv);
+	ret = sun8i_dwmac_set_syscon(priv);
 	if (ret)
 		return NULL;
 
@@ -889,6 +982,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	struct sunxi_priv_data *gmac;
 	struct device *dev = &pdev->dev;
 	int ret;
+	struct stmmac_priv *priv;
+	struct net_device *ndev;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
 	if (ret)
@@ -932,29 +1027,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 	}
 
 	plat_dat->interface = of_get_phy_mode(dev->of_node);
-	if (plat_dat->interface == gmac->variant->internal_phy) {
-		dev_info(&pdev->dev, "Will use internal PHY\n");
-		gmac->use_internal_phy = true;
-		gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
-		if (IS_ERR(gmac->ephy_clk)) {
-			ret = PTR_ERR(gmac->ephy_clk);
-			dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret);
-			return -EINVAL;
-		}
-
-		gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
-		if (IS_ERR(gmac->rst_ephy)) {
-			ret = PTR_ERR(gmac->rst_ephy);
-			if (ret == -EPROBE_DEFER)
-				return ret;
-			dev_err(&pdev->dev, "No EPHY reset control found %d\n",
-				ret);
-			return -EINVAL;
-		}
-	} else {
-		dev_info(&pdev->dev, "Will use external PHY\n");
-		gmac->use_internal_phy = false;
-	}
 
 	/* platform data specifying hardware features and callbacks.
 	 * hardware features were copied from Allwinner drivers.
@@ -973,9 +1045,34 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
-		sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
+		goto dwmac_exit;
+
+	ndev = dev_get_drvdata(&pdev->dev);
+	priv = netdev_priv(ndev);
+	/* The mux must be registered after parent MDIO
+	 * so after stmmac_dvr_probe()
+	 */
+	if (gmac->variant->soc_has_internal_phy) {
+		ret = get_ephy_nodes(priv);
+		if (ret)
+			return ret;
+		ret = sun8i_dwmac_register_mdio_mux(priv);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to register mux\n");
+			goto dwmac_mux;
+		}
+	} else {
+		ret = sun8i_dwmac_reset(priv);
+		if (ret)
+			goto dwmac_exit;
+	}
 
 	return ret;
+dwmac_mux:
+	sun8i_dwmac_unset_syscon(gmac);
+dwmac_exit:
+	sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
+return ret;
 }
 
 static const struct of_device_id sun8i_dwmac_match[] = {
-- 
2.13.6

Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2467 bytes --]

On Sun, Oct 08, 2017 at 06:33:40PM +0000, Corentin Labbe wrote:
> On Thu, Sep 28, 2017 at 09:37:08AM +0200, Corentin Labbe wrote:
> > On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> > > Hi Corentin
> > > 
> > > > +Required properties for the mdio-mux node:
> > > > +  - compatible = "mdio-mux"
> > > 
> > > This is too generic. Please add a more specific compatible for this
> > > particular mux. You can keep "mdio-mux", since that is what the MDIO
> > > subsystem will look for.
> > > 
> > 
> > I will add allwinner,sun8i-h3-mdio-mux
> > 
> > > > +Required properties of the integrated phy node:
> > > >  - clocks: a phandle to the reference clock for the EPHY
> > > >  - resets: a phandle to the reset control for the EPHY
> > > > +- phy-is-integrated
> > > 
> > > So the last thing you said is that the mux is not the problem
> > > here. Something else is locking up. Did you discover what?
> > > 
> > > I really would like phy-is-integrated to go away.
> > > 
> > 
> > I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
> > So we could remove phy-is-integrated by:
> > Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
> > But this means:
> > - getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
> > - doing some unnecessary tasks (enable/scan/disable) when external_phy is needed
> > 
> > Regards
> 
> Hello all
> 
> Below is the current patch, as you can read, it does not use anymore the phy-is-integrated property.
> So now, the mdio-mux must always enable the internal mdio when switch_fn ask for it and so reset MAC and so need to enable ephy clk/reset.
> But for this I need a reference to thoses clock and reset. (this is done in get_ephy_nodes)
> The current version set those clock in mdio-mux node, and as you can see it is already ugly (lots of get next node),
> if the clk/rst nodes were as it should be, in phy nodes, it will be more bad.
> 
> So, since the MAC have a dependency on thoses clk/rst nodes for
> doing reset(), I seek a proper way to get references on it.
>
> OR do you agree that putting ephy clk/rst in emac is acceptable ?

Why not just parsing the DT child nodes looking for resets and clocks
properties? The usual PHY don't have that.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]