[PATCH 4.14 00/31] 4.14.1-stable review

[PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.1 release.
There are 31 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.1-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.1-rc1

Johan Hovold <johan@kernel.org>
    spi: fix use-after-free at controller deregistration

Hans de Goede <hdegoede@redhat.com>
    staging: rtl8188eu: Revert 4 commits breaking ARP

Hans de Goede <hdegoede@redhat.com>
    staging: vboxvideo: Fix reporting invalid suggested-offset-properties

Johan Hovold <johan@kernel.org>
    staging: greybus: spilib: fix use-after-free after deregistration

Gilad Ben-Yossef <gilad@benyossef.com>
    staging: ccree: fix 64 bit scatter/gather DMA ops

Huacai Chen <chenhc@lemote.com>
    staging: sm750fb: Fix parameter mistake in poke32

Aditya Shankar <aditya.shankar@microchip.com>
    staging: wilc1000: Fix bssid buffer offset in Txq

Bjorn Andersson <bjorn.andersson@linaro.org>
    rpmsg: glink: Add missing MODULE_LICENSE

Jason Gerecke <killertofu@gmail.com>
    HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection

Sébastien Szymanski <sebastien.szymanski@armadeus.com>
    HID: cp2112: add HIDRAW dependency

Hans de Goede <hdegoede@redhat.com>
    platform/x86: peaq_wmi: Fix missing terminating entry for peaq_dmi_table

Hans de Goede <hdegoede@redhat.com>
    platform/x86: peaq-wmi: Add DMI check before binding to the WMI interface

Yazen Ghannam <yazen.ghannam@amd.com>
    x86/MCE/AMD: Always give panic severity for UC errors in kernel context

Andy Lutomirski <luto@kernel.org>
    selftests/x86/protection_keys: Fix syscall NR redefinition warnings

Johan Hovold <johan@kernel.org>
    USB: serial: garmin_gps: fix memory leak on probe errors

Johan Hovold <johan@kernel.org>
    USB: serial: garmin_gps: fix I/O after failed probe and remove

Douglas Fischer <douglas.fischer@outlook.com>
    USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update

Lu Baolu <baolu.lu@linux.intel.com>
    USB: serial: Change DbC debug device binding ID

Johan Hovold <johan@kernel.org>
    USB: serial: metro-usb: stop I/O after failed open

Andrew Gabbasov <andrew_gabbasov@mentor.com>
    usb: gadget: f_fs: Fix use-after-free in ffs_free_inst

Bernhard Rosenkraenzer <bernhard.rosenkranzer@linaro.org>
    USB: Add delay-init quirk for Corsair K70 LUX keyboards

Alan Stern <stern@rowland.harvard.edu>
    USB: usbfs: compute urb->actual_length for isochronous

Lu Baolu <baolu.lu@linux.intel.com>
    USB: early: Use new USB product ID and strings for DbC device

raveendra padasalagi <raveendra.padasalagi@broadcom.com>
    crypto: brcm - Explicity ACK mailbox message

Eric Biggers <ebiggers@google.com>
    crypto: dh - Don't permit 'key' or 'g' size longer than 'p'

Eric Biggers <ebiggers@google.com>
    crypto: dh - Don't permit 'p' to be 0

Eric Biggers <ebiggers@google.com>
    crypto: dh - Fix double free of ctx->p

Andrey Konovalov <andreyknvl@google.com>
    media: dib0700: fix invalid dvb_detach argument

Arvind Yadav <arvind.yadav.cs@gmail.com>
    media: imon: Fix null-ptr-deref in imon_probe

Adam Wallis <awallis@codeaurora.org>
    dmaengine: dmatest: warn user when dma test times out

Qiuxu Zhuo <qiuxu.zhuo@intel.com>
    EDAC, sb_edac: Don't create a second memory controller if HA1 is not present


-------------

Diffstat:

 Makefile                                      |   4 +-
 arch/x86/kernel/cpu/mcheck/mce-severity.c     |   7 +-
 crypto/dh.c                                   |  33 ++++-----
 crypto/dh_helper.c                            |  16 ++++
 drivers/crypto/bcm/cipher.c                   | 101 ++++++++++++--------------
 drivers/dma/dmatest.c                         |   1 +
 drivers/edac/sb_edac.c                        |   9 ++-
 drivers/hid/Kconfig                           |   2 +-
 drivers/hid/wacom_wac.h                       |   1 +
 drivers/media/rc/imon.c                       |   5 ++
 drivers/media/usb/dvb-usb/dib0700_devices.c   |  24 +++---
 drivers/platform/x86/peaq-wmi.c               |  19 +++++
 drivers/rpmsg/qcom_glink_native.c             |   3 +
 drivers/spi/spi.c                             |   5 +-
 drivers/staging/ccree/cc_lli_defs.h           |   2 +-
 drivers/staging/greybus/spilib.c              |   8 +-
 drivers/staging/rtl8188eu/core/rtw_recv.c     |  83 ++++++++++++---------
 drivers/staging/rtl8188eu/os_dep/mon.c        |  34 ++-------
 drivers/staging/sm750fb/ddk750_chip.h         |   2 +-
 drivers/staging/vboxvideo/vbox_drv.h          |   8 +-
 drivers/staging/vboxvideo/vbox_irq.c          |   4 +-
 drivers/staging/vboxvideo/vbox_mode.c         |  26 +++++--
 drivers/staging/wilc1000/wilc_wlan.c          |   2 +-
 drivers/usb/core/devio.c                      |  14 ++++
 drivers/usb/core/quirks.c                     |   3 +
 drivers/usb/early/xhci-dbc.h                  |   6 +-
 drivers/usb/gadget/function/f_fs.c            |   1 +
 drivers/usb/serial/garmin_gps.c               |  22 +++++-
 drivers/usb/serial/metro-usb.c                |  11 ++-
 drivers/usb/serial/qcserial.c                 |   1 +
 drivers/usb/serial/usb_debug.c                |   4 +-
 tools/testing/selftests/x86/protection_keys.c |  24 ++++--
 32 files changed, 289 insertions(+), 196 deletions(-)

[PATCH 4.14 01/31] EDAC, sb_edac: Dont create a second memory controller if HA1 is not present

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

commit 15cc3ae001873845b5d842e212478a6570c7d938 upstream.

Yi Zhang reported the following failure on a 2-socket Haswell (E5-2603v3)
server (DELL PowerEdge 730xd):

  EDAC sbridge: Some needed devices are missing
  EDAC MC: Removed device 0 for sb_edac.c Haswell SrcID#0_Ha#0: DEV 0000:7f:12.0
  EDAC MC: Removed device 1 for sb_edac.c Haswell SrcID#1_Ha#0: DEV 0000:ff:12.0
  EDAC sbridge: Couldn't find mci handler
  EDAC sbridge: Couldn't find mci handler
  EDAC sbridge: Failed to register device with error -19.

The refactored sb_edac driver creates the IMC1 (the 2nd memory
controller) if any IMC1 device is present. In this case only
HA1_TA of IMC1 was present, but the driver expected to find
HA1/HA1_TM/HA1_TAD[0-3] devices too, leading to the above failure.

The document [1] says the 'E5-2603 v3' CPU has 4 memory channels max. Yi
Zhang inserted one DIMM per channel for each CPU, and did random error
address injection test with this patch:

      4024  addresses fell in TOLM hole area
     12715  addresses fell in CPU_SrcID#0_Ha#0_Chan#0_DIMM#0
     12774  addresses fell in CPU_SrcID#0_Ha#0_Chan#1_DIMM#0
     12798  addresses fell in CPU_SrcID#0_Ha#0_Chan#2_DIMM#0
     12913  addresses fell in CPU_SrcID#0_Ha#0_Chan#3_DIMM#0
     12674  addresses fell in CPU_SrcID#1_Ha#0_Chan#0_DIMM#0
     12686  addresses fell in CPU_SrcID#1_Ha#0_Chan#1_DIMM#0
     12882  addresses fell in CPU_SrcID#1_Ha#0_Chan#2_DIMM#0
     12934  addresses fell in CPU_SrcID#1_Ha#0_Chan#3_DIMM#0
    106400  addresses were injected totally.

The test result shows that all the 4 channels belong to IMC0 per CPU, so
the server really only has one IMC per CPU.

In the 1st page of chapter 2 in datasheet [2], it also says 'E5-2600 v3'
implements either one or two IMCs. For CPUs with one IMC, IMC1 is not
used and should be ignored.

Thus, do not create a second memory controller if the key HA1 is absent.

[1] http://ark.intel.com/products/83349/Intel-Xeon-Processor-E5-2603-v3-15M-Cache-1_60-GHz
[2] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-v3-datasheet-vol-2.pdf

Reported-and-tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170913104214.7325-1-qiuxu.zhuo@intel.com
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/sb_edac.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -462,6 +462,7 @@ static const struct pci_id_table pci_dev
 static const struct pci_id_descr pci_dev_descr_ibridge[] = {
 		/* Processor Home Agent */
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0,        0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1,        1, IMC1) },
 
 		/* Memory controller */
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA,     0, IMC0) },
@@ -472,7 +473,6 @@ static const struct pci_id_descr pci_dev
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3,   0, IMC0) },
 
 		/* Optional, mode 2HA */
-	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1,        1, IMC1) },
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA,     1, IMC1) },
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS,    1, IMC1) },
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0,   1, IMC1) },
@@ -2291,6 +2291,13 @@ static int sbridge_get_onedevice(struct
 next_imc:
 	sbridge_dev = get_sbridge_dev(bus, dev_descr->dom, multi_bus, sbridge_dev);
 	if (!sbridge_dev) {
+		/* If the HA1 wasn't found, don't create EDAC second memory controller */
+		if (dev_descr->dom == IMC1 && devno != 1) {
+			edac_dbg(0, "Skip IMC1: %04x:%04x (since HA1 was absent)\n",
+				 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+			pci_dev_put(pdev);
+			return 0;
+		}
 
 		if (dev_descr->dom == SOCK)
 			goto out_imc;

[PATCH 4.14 02/31] dmaengine: dmatest: warn user when dma test times out

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Wallis <awallis@codeaurora.org>

commit a9df21e34b422f79d9a9fa5c3eff8c2a53491be6 upstream.

Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks). Ideally, this would be
cleaned up in the thread handler, but at the very least, the kernel
is left in a very precarious scenario that can lead to some long debug
sessions when the crash comes later.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197605
Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/dmatest.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -702,6 +702,7 @@ static int dmatest_func(void *data)
 			 * free it this time?" dancing.  For now, just
 			 * leave it dangling.
 			 */
+			WARN(1, "dmatest: Kernel stack may be corrupted!!\n");
 			dmaengine_unmap_put(um);
 			result("test timed out", total_tests, src_off, dst_off,
 			       len, 0);

[PATCH 4.14 03/31] media: imon: Fix null-ptr-deref in imon_probe

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>

commit 58fd55e838276a0c13d1dc7c387f90f25063cbf3 upstream.

It seems that the return value of usb_ifnum_to_if() can be NULL and
needs to be checked.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/imon.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -2517,6 +2517,11 @@ static int imon_probe(struct usb_interfa
 	mutex_lock(&driver_lock);
 
 	first_if = usb_ifnum_to_if(usbdev, 0);
+	if (!first_if) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
 	first_if_ctx = usb_get_intfdata(first_if);
 
 	if (ifnum == 0) {

[PATCH 4.14 04/31] media: dib0700: fix invalid dvb_detach argument

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Konovalov <andreyknvl@google.com>

commit eb0c19942288569e0ae492476534d5a485fb8ab4 upstream.

dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer
to a function. Right now a pointer to state->dib7000p_ops is passed to
dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by
syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead.

------------[ cut here ]------------
kernel BUG at kernel/module.c:1081!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
Modules linked in:
CPU: 1 PID: 1151 Comm: kworker/1:1 Tainted: G        W
4.14.0-rc1-42251-gebb2c2437d80 #224
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Workqueue: usb_hub_wq hub_event
task: ffff88006a336300 task.stack: ffff88006a7c8000
RIP: 0010:symbol_put_addr+0x54/0x60 kernel/module.c:1083
RSP: 0018:ffff88006a7ce210 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880062a8d190 RCX: 0000000000000000
RDX: dffffc0000000020 RSI: ffffffff85876d60 RDI: ffff880062a8d190
RBP: ffff88006a7ce218 R08: 1ffff1000d4f9c12 R09: 1ffff1000d4f9ae4
R10: 1ffff1000d4f9bed R11: 0000000000000000 R12: ffff880062a8d180
R13: 00000000ffffffed R14: ffff880062a8d190 R15: ffff88006947c000
FS:  0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6416532000 CR3: 00000000632f5000 CR4: 00000000000006e0
Call Trace:
 stk7070p_frontend_attach+0x515/0x610
drivers/media/usb/dvb-usb/dib0700_devices.c:1013
 dvb_usb_adapter_frontend_init+0x32b/0x660
drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162
 dvb_usb_device_init+0xf70/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277
 dib0700_probe+0x171/0x5a0 drivers/media/usb/dvb-usb/dib0700_core.c:886
 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
 really_probe drivers/base/dd.c:413
 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653
 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710
 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
 device_add+0xd0b/0x1660 drivers/base/core.c:1835
 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
 hub_port_connect drivers/usb/core/hub.c:4903
 hub_port_connect_change drivers/usb/core/hub.c:5009
 port_event drivers/usb/core/hub.c:5115
 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
 worker_thread+0x221/0x1850 kernel/workqueue.c:2253
 kthread+0x3a1/0x470 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Code: ff ff 48 85 c0 74 24 48 89 c7 e8 48 ea ff ff bf 01 00 00 00 e8
de 20 e3 ff 65 8b 05 b7 2f c2 7e 85 c0 75 c9 e8 f9 0b c1 ff eb c2 <0f>
0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 b8 00 00
RIP: symbol_put_addr+0x54/0x60 RSP: ffff88006a7ce210
---[ end trace b75b357739e7e116 ]---

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/dib0700_devices.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -291,7 +291,7 @@ static int stk7700P2_frontend_attach(str
 					     stk7700d_dib7000p_mt2266_config)
 		    != 0) {
 			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
-			dvb_detach(&state->dib7000p_ops);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
 			return -ENODEV;
 		}
 	}
@@ -325,7 +325,7 @@ static int stk7700d_frontend_attach(stru
 					     stk7700d_dib7000p_mt2266_config)
 		    != 0) {
 			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
-			dvb_detach(&state->dib7000p_ops);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
 			return -ENODEV;
 		}
 	}
@@ -478,7 +478,7 @@ static int stk7700ph_frontend_attach(str
 				     &stk7700ph_dib7700_xc3028_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 		    __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -1010,7 +1010,7 @@ static int stk7070p_frontend_attach(stru
 				     &dib7070p_dib7000p_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 		    __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -1068,7 +1068,7 @@ static int stk7770p_frontend_attach(stru
 				     &dib7770p_dib7000p_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 		    __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -3056,7 +3056,7 @@ static int nim7090_frontend_attach(struc
 
 	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config);
@@ -3109,7 +3109,7 @@ static int tfe7090pvr_frontend0_attach(s
 	/* initialize IC 0 */
 	if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -3139,7 +3139,7 @@ static int tfe7090pvr_frontend1_attach(s
 	i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1);
 	if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n", __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -3214,7 +3214,7 @@ static int tfe7790p_frontend_attach(stru
 				1, 0x10, &tfe7790p_dib7000p_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 				__func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 	adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap,
@@ -3309,7 +3309,7 @@ static int stk7070pd_frontend_attach0(st
 				     stk7070pd_dib7000p_config) != 0) {
 		err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 		    __func__);
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 
@@ -3384,7 +3384,7 @@ static int novatd_frontend_attach(struct
 					     stk7070pd_dib7000p_config) != 0) {
 			err("%s: state->dib7000p_ops.i2c_enumeration failed.  Cannot continue\n",
 			    __func__);
-			dvb_detach(&state->dib7000p_ops);
+			dvb_detach(state->dib7000p_ops.set_wbd_ref);
 			return -ENODEV;
 		}
 	}
@@ -3620,7 +3620,7 @@ static int pctv340e_frontend_attach(stru
 
 	if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
 		/* Demodulator not found for some reason? */
-		dvb_detach(&state->dib7000p_ops);
+		dvb_detach(state->dib7000p_ops.set_wbd_ref);
 		return -ENODEV;
 	}
 

[PATCH 4.14 05/31] crypto: dh - Fix double free of ctx->p

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 12d41a023efb01b846457ccdbbcbe2b65a87d530 upstream.

When setting the secret with the software Diffie-Hellman implementation,
if allocating 'g' failed (e.g. if it was longer than
MAX_EXTERN_MPI_BITS), then 'p' was freed twice: once immediately, and
once later when the crypto_kpp tfm was destroyed.

Fix it by using dh_free_ctx() (renamed to dh_clear_ctx()) in the error
paths, as that correctly sets the pointers to NULL.

KASAN report:

    MPI: mpi too large (32760 bits)
    ==================================================================
    BUG: KASAN: use-after-free in mpi_free+0x131/0x170
    Read of size 4 at addr ffff88006c7cdf90 by task reproduce_doubl/367

    CPU: 1 PID: 367 Comm: reproduce_doubl Not tainted 4.14.0-rc7-00040-g05298abde6fe #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     dump_stack+0xb3/0x10b
     ? mpi_free+0x131/0x170
     print_address_description+0x79/0x2a0
     ? mpi_free+0x131/0x170
     kasan_report+0x236/0x340
     ? akcipher_register_instance+0x90/0x90
     __asan_report_load4_noabort+0x14/0x20
     mpi_free+0x131/0x170
     ? akcipher_register_instance+0x90/0x90
     dh_exit_tfm+0x3d/0x140
     crypto_kpp_exit_tfm+0x52/0x70
     crypto_destroy_tfm+0xb3/0x250
     __keyctl_dh_compute+0x640/0xe90
     ? kasan_slab_free+0x12f/0x180
     ? dh_data_from_key+0x240/0x240
     ? key_create_or_update+0x1ee/0xb20
     ? key_instantiate_and_link+0x440/0x440
     ? lock_contended+0xee0/0xee0
     ? kfree+0xcf/0x210
     ? SyS_add_key+0x268/0x340
     keyctl_dh_compute+0xb3/0xf1
     ? __keyctl_dh_compute+0xe90/0xe90
     ? SyS_add_key+0x26d/0x340
     ? entry_SYSCALL_64_fastpath+0x5/0xbe
     ? trace_hardirqs_on_caller+0x3f4/0x560
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x43ccf9
    RSP: 002b:00007ffeeec96158 EFLAGS: 00000246 ORIG_RAX: 00000000000000fa
    RAX: ffffffffffffffda RBX: 000000000248b9b9 RCX: 000000000043ccf9
    RDX: 00007ffeeec96170 RSI: 00007ffeeec96160 RDI: 0000000000000017
    RBP: 0000000000000046 R08: 0000000000000000 R09: 0248b9b9143dc936
    R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000000
    R13: 0000000000409670 R14: 0000000000409700 R15: 0000000000000000

    Allocated by task 367:
     save_stack_trace+0x16/0x20
     kasan_kmalloc+0xeb/0x180
     kmem_cache_alloc_trace+0x114/0x300
     mpi_alloc+0x4b/0x230
     mpi_read_raw_data+0xbe/0x360
     dh_set_secret+0x1dc/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

    Freed by task 367:
     save_stack_trace+0x16/0x20
     kasan_slab_free+0xab/0x180
     kfree+0xb5/0x210
     mpi_free+0xcb/0x170
     dh_set_secret+0x2d7/0x460
     __keyctl_dh_compute+0x623/0xe90
     keyctl_dh_compute+0xb3/0xf1
     SyS_keyctl+0x72/0x2c0
     entry_SYSCALL_64_fastpath+0x1f/0xbe

Fixes: 802c7f1c84e4 ("crypto: dh - Add DH software implementation")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/dh.c |   33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

--- a/crypto/dh.c
+++ b/crypto/dh.c
@@ -21,19 +21,12 @@ struct dh_ctx {
 	MPI xa;
 };
 
-static inline void dh_clear_params(struct dh_ctx *ctx)
+static void dh_clear_ctx(struct dh_ctx *ctx)
 {
 	mpi_free(ctx->p);
 	mpi_free(ctx->g);
-	ctx->p = NULL;
-	ctx->g = NULL;
-}
-
-static void dh_free_ctx(struct dh_ctx *ctx)
-{
-	dh_clear_params(ctx);
 	mpi_free(ctx->xa);
-	ctx->xa = NULL;
+	memset(ctx, 0, sizeof(*ctx));
 }
 
 /*
@@ -71,10 +64,8 @@ static int dh_set_params(struct dh_ctx *
 		return -EINVAL;
 
 	ctx->g = mpi_read_raw_data(params->g, params->g_size);
-	if (!ctx->g) {
-		mpi_free(ctx->p);
+	if (!ctx->g)
 		return -EINVAL;
-	}
 
 	return 0;
 }
@@ -86,21 +77,23 @@ static int dh_set_secret(struct crypto_k
 	struct dh params;
 
 	/* Free the old MPI key if any */
-	dh_free_ctx(ctx);
+	dh_clear_ctx(ctx);
 
 	if (crypto_dh_decode_key(buf, len, &params) < 0)
-		return -EINVAL;
+		goto err_clear_ctx;
 
 	if (dh_set_params(ctx, &params) < 0)
-		return -EINVAL;
+		goto err_clear_ctx;
 
 	ctx->xa = mpi_read_raw_data(params.key, params.key_size);
-	if (!ctx->xa) {
-		dh_clear_params(ctx);
-		return -EINVAL;
-	}
+	if (!ctx->xa)
+		goto err_clear_ctx;
 
 	return 0;
+
+err_clear_ctx:
+	dh_clear_ctx(ctx);
+	return -EINVAL;
 }
 
 static int dh_compute_value(struct kpp_request *req)
@@ -158,7 +151,7 @@ static void dh_exit_tfm(struct crypto_kp
 {
 	struct dh_ctx *ctx = dh_get_ctx(tfm);
 
-	dh_free_ctx(ctx);
+	dh_clear_ctx(ctx);
 }
 
 static struct kpp_alg dh = {

[PATCH 4.14 06/31] crypto: dh - Dont permit p to be 0

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 199512b1234f09e44d592153ec82b44212b2f0c4 upstream.

If 'p' is 0 for the software Diffie-Hellman implementation, then
dh_max_size() returns 0.  In the case of KEYCTL_DH_COMPUTE, this causes
ZERO_SIZE_PTR to be passed to sg_init_one(), which with
CONFIG_DEBUG_SG=y triggers the 'BUG_ON(!virt_addr_valid(buf));' in
sg_set_buf().

Fix this by making crypto_dh_decode_key() reject 0 for 'p'.  p=0 makes
no sense for any DH implementation because 'p' is supposed to be a prime
number.  Moreover, 'mod 0' is not mathematically defined.

Bug report:

    kernel BUG at ./include/linux/scatterlist.h:140!
    invalid opcode: 0000 [#1] SMP KASAN
    CPU: 0 PID: 27112 Comm: syz-executor2 Not tainted 4.14.0-rc7-00010-gf5dbb5d0ce32-dirty #7
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014
    task: ffff88006caac0c0 task.stack: ffff88006c7c8000
    RIP: 0010:sg_set_buf include/linux/scatterlist.h:140 [inline]
    RIP: 0010:sg_init_one+0x1b3/0x240 lib/scatterlist.c:156
    RSP: 0018:ffff88006c7cfb08 EFLAGS: 00010216
    RAX: 0000000000010000 RBX: ffff88006c7cfe30 RCX: 00000000000064ee
    RDX: ffffffff81cf64c3 RSI: ffffc90000d72000 RDI: ffffffff92e937e0
    RBP: ffff88006c7cfb30 R08: ffffed000d8f9fab R09: ffff88006c7cfd30
    R10: 0000000000000005 R11: ffffed000d8f9faa R12: ffff88006c7cfd30
    R13: 0000000000000000 R14: 0000000000000010 R15: ffff88006c7cfc50
    FS:  00007fce190fa700(0000) GS:ffff88003ea00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fffc6b33db8 CR3: 000000003cf64000 CR4: 00000000000006f0
    Call Trace:
     __keyctl_dh_compute+0xa95/0x19b0 security/keys/dh.c:360
     keyctl_dh_compute+0xac/0x100 security/keys/dh.c:434
     SYSC_keyctl security/keys/keyctl.c:1745 [inline]
     SyS_keyctl+0x72/0x2c0 security/keys/keyctl.c:1641
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x4585c9
    RSP: 002b:00007fce190f9bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000fa
    RAX: ffffffffffffffda RBX: 0000000000738020 RCX: 00000000004585c9
    RDX: 000000002000d000 RSI: 0000000020000ff4 RDI: 0000000000000017
    RBP: 0000000000000046 R08: 0000000020008000 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff6e610cde
    R13: 00007fff6e610cdf R14: 00007fce190fa700 R15: 0000000000000000
    Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 33 5b 45 89 6c 24 14 41 5c 41 5d 41 5e 41 5f 5d c3 e8 fd 8f 68 ff <0f> 0b e8 f6 8f 68 ff 0f 0b e8 ef 8f 68 ff 0f 0b e8 e8 8f 68 ff 20
    RIP: sg_set_buf include/linux/scatterlist.h:140 [inline] RSP: ffff88006c7cfb08
    RIP: sg_init_one+0x1b3/0x240 lib/scatterlist.c:156 RSP: ffff88006c7cfb08

Fixes: 802c7f1c84e4 ("crypto: dh - Add DH software implementation")
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/dh_helper.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/crypto/dh_helper.c
+++ b/crypto/dh_helper.c
@@ -90,6 +90,14 @@ int crypto_dh_decode_key(const char *buf
 	params->p = (void *)(ptr + params->key_size);
 	params->g = (void *)(ptr + params->key_size + params->p_size);
 
+	/*
+	 * Don't permit 'p' to be 0.  It's not a prime number, and it's subject
+	 * to corner cases such as 'mod 0' being undefined or
+	 * crypto_kpp_maxsize() returning 0.
+	 */
+	if (memchr_inv(params->p, 0, params->p_size) == NULL)
+		return -EINVAL;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(crypto_dh_decode_key);

[PATCH 4.14 07/31] crypto: dh - Dont permit key or g size longer than p

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit ccd9888f14a8019c0bbdeeae758aba1f58693712 upstream.

The "qat-dh" DH implementation assumes that 'key' and 'g' can be copied
into a buffer with size 'p_size'.  However it was never checked that
that was actually the case, which most likely allowed users to cause a
buffer underflow via KEYCTL_DH_COMPUTE.

Fix this by updating crypto_dh_decode_key() to verify this precondition
for all DH implementations.

Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/dh_helper.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/crypto/dh_helper.c
+++ b/crypto/dh_helper.c
@@ -83,6 +83,14 @@ int crypto_dh_decode_key(const char *buf
 	if (secret.len != crypto_dh_key_len(params))
 		return -EINVAL;
 
+	/*
+	 * Don't permit the buffer for 'key' or 'g' to be larger than 'p', since
+	 * some drivers assume otherwise.
+	 */
+	if (params->key_size > params->p_size ||
+	    params->g_size > params->p_size)
+		return -EINVAL;
+
 	/* Don't allocate memory. Set pointers to data within
 	 * the given buffer
 	 */

[PATCH 4.14 08/31] crypto: brcm - Explicity ACK mailbox message

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: raveendra padasalagi <raveendra.padasalagi@broadcom.com>

commit f0e2ce58f853634d7ad1a418a49bd5fbd556227c upstream.

Add support to explicity ACK mailbox message
because after sending message we can know
the send status via error attribute of brcm_message.

This is needed to support "txdone_ack" supported in
mailbox controller driver.

Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/bcm/cipher.c |  101 ++++++++++++++++++++------------------------
 1 file changed, 46 insertions(+), 55 deletions(-)

--- a/drivers/crypto/bcm/cipher.c
+++ b/drivers/crypto/bcm/cipher.c
@@ -256,6 +256,44 @@ spu_ablkcipher_tx_sg_create(struct brcm_
 	return 0;
 }
 
+static int mailbox_send_message(struct brcm_message *mssg, u32 flags,
+				u8 chan_idx)
+{
+	int err;
+	int retry_cnt = 0;
+	struct device *dev = &(iproc_priv.pdev->dev);
+
+	err = mbox_send_message(iproc_priv.mbox[chan_idx], mssg);
+	if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) {
+		while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) {
+			/*
+			 * Mailbox queue is full. Since MAY_SLEEP is set, assume
+			 * not in atomic context and we can wait and try again.
+			 */
+			retry_cnt++;
+			usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX);
+			err = mbox_send_message(iproc_priv.mbox[chan_idx],
+						mssg);
+			atomic_inc(&iproc_priv.mb_no_spc);
+		}
+	}
+	if (err < 0) {
+		atomic_inc(&iproc_priv.mb_send_fail);
+		return err;
+	}
+
+	/* Check error returned by mailbox controller */
+	err = mssg->error;
+	if (unlikely(err < 0)) {
+		dev_err(dev, "message error %d", err);
+		/* Signal txdone for mailbox channel */
+	}
+
+	/* Signal txdone for mailbox channel */
+	mbox_client_txdone(iproc_priv.mbox[chan_idx], err);
+	return err;
+}
+
 /**
  * handle_ablkcipher_req() - Submit as much of a block cipher request as fits in
  * a single SPU request message, starting at the current position in the request
@@ -293,7 +331,6 @@ static int handle_ablkcipher_req(struct
 	u32 pad_len;		/* total length of all padding */
 	bool update_key = false;
 	struct brcm_message *mssg;	/* mailbox message */
-	int retry_cnt = 0;
 
 	/* number of entries in src and dst sg in mailbox message. */
 	u8 rx_frag_num = 2;	/* response header and STATUS */
@@ -462,24 +499,9 @@ static int handle_ablkcipher_req(struct
 	if (err)
 		return err;
 
-	err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx], mssg);
-	if (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) {
-		while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) {
-			/*
-			 * Mailbox queue is full. Since MAY_SLEEP is set, assume
-			 * not in atomic context and we can wait and try again.
-			 */
-			retry_cnt++;
-			usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX);
-			err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx],
-						mssg);
-			atomic_inc(&iproc_priv.mb_no_spc);
-		}
-	}
-	if (unlikely(err < 0)) {
-		atomic_inc(&iproc_priv.mb_send_fail);
+	err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
+	if (unlikely(err < 0))
 		return err;
-	}
 
 	return -EINPROGRESS;
 }
@@ -710,7 +732,6 @@ static int handle_ahash_req(struct iproc
 	u32 spu_hdr_len;
 	unsigned int digestsize;
 	u16 rem = 0;
-	int retry_cnt = 0;
 
 	/*
 	 * number of entries in src and dst sg. Always includes SPU msg header.
@@ -904,24 +925,10 @@ static int handle_ahash_req(struct iproc
 	if (err)
 		return err;
 
-	err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx], mssg);
-	if (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) {
-		while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) {
-			/*
-			 * Mailbox queue is full. Since MAY_SLEEP is set, assume
-			 * not in atomic context and we can wait and try again.
-			 */
-			retry_cnt++;
-			usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX);
-			err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx],
-						mssg);
-			atomic_inc(&iproc_priv.mb_no_spc);
-		}
-	}
-	if (err < 0) {
-		atomic_inc(&iproc_priv.mb_send_fail);
+	err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
+	if (unlikely(err < 0))
 		return err;
-	}
+
 	return -EINPROGRESS;
 }
 
@@ -1320,7 +1327,6 @@ static int handle_aead_req(struct iproc_
 	int assoc_nents = 0;
 	bool incl_icv = false;
 	unsigned int digestsize = ctx->digestsize;
-	int retry_cnt = 0;
 
 	/* number of entries in src and dst sg. Always includes SPU msg header.
 	 */
@@ -1558,24 +1564,9 @@ static int handle_aead_req(struct iproc_
 	if (err)
 		return err;
 
-	err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx], mssg);
-	if (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) {
-		while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) {
-			/*
-			 * Mailbox queue is full. Since MAY_SLEEP is set, assume
-			 * not in atomic context and we can wait and try again.
-			 */
-			retry_cnt++;
-			usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX);
-			err = mbox_send_message(iproc_priv.mbox[rctx->chan_idx],
-						mssg);
-			atomic_inc(&iproc_priv.mb_no_spc);
-		}
-	}
-	if (err < 0) {
-		atomic_inc(&iproc_priv.mb_send_fail);
+	err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
+	if (unlikely(err < 0))
 		return err;
-	}
 
 	return -EINPROGRESS;
 }
@@ -4537,7 +4528,7 @@ static int spu_mb_init(struct device *de
 	mcl->dev = dev;
 	mcl->tx_block = false;
 	mcl->tx_tout = 0;
-	mcl->knows_txdone = false;
+	mcl->knows_txdone = true;
 	mcl->rx_callback = spu_rx_callback;
 	mcl->tx_done = NULL;
 

[PATCH 4.14 09/31] USB: early: Use new USB product ID and strings for DbC device

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lu Baolu <baolu.lu@linux.intel.com>

commit c67678ec78eff9cf1e7e997fe6c37c9fcccfc5b8 upstream.

The DbC register set defines an interface for system software
to specify the vendor id and product id for the debug device.
These two values will be presented by the debug device in its
device descriptor idVendor and idProduct fields.

The current used product ID is a place holder. We now have a
valid one. The description strings are changed accordingly.

This patch should be back-ported to kernels as old as v4.12,
that contain the commit aeb9dd1de98c ("usb/early: Add driver
for xhci debug capability").

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/early/xhci-dbc.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/early/xhci-dbc.h
+++ b/drivers/usb/early/xhci-dbc.h
@@ -90,8 +90,8 @@ struct xdbc_context {
 
 #define XDBC_INFO_CONTEXT_SIZE		48
 #define XDBC_MAX_STRING_LENGTH		64
-#define XDBC_STRING_MANUFACTURER	"Linux"
-#define XDBC_STRING_PRODUCT		"Remote GDB"
+#define XDBC_STRING_MANUFACTURER	"Linux Foundation"
+#define XDBC_STRING_PRODUCT		"Linux USB GDB Target"
 #define XDBC_STRING_SERIAL		"0001"
 
 struct xdbc_strings {
@@ -103,7 +103,7 @@ struct xdbc_strings {
 
 #define XDBC_PROTOCOL		1	/* GNU Remote Debug Command Set */
 #define XDBC_VENDOR_ID		0x1d6b	/* Linux Foundation 0x1d6b */
-#define XDBC_PRODUCT_ID		0x0004	/* __le16 idProduct; device 0004 */
+#define XDBC_PRODUCT_ID		0x0011	/* __le16 idProduct; device 0011 */
 #define XDBC_DEVICE_REV		0x0010	/* 0.10 */
 
 /*

[PATCH 4.14 10/31] USB: usbfs: compute urb->actual_length for isochronous

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 2ef47001b3ee3ded579b7532ebdcf8680e4d8c54 upstream.

The USB kerneldoc says that the actual_length field "is read in
non-iso completion functions", but the usbfs driver uses it for all
URB types in processcompl().  Since not all of the host controller
drivers set actual_length for isochronous URBs, programs using usbfs
with some host controllers don't work properly.  For example, Minas
reports that a USB camera controlled by libusb doesn't work properly
with a dwc2 controller.

It doesn't seem worthwhile to change the HCDs and the documentation,
since the in-kernel USB class drivers evidently don't rely on
actual_length for isochronous transfers.  The easiest solution is for
usbfs to calculate the actual_length value for itself, by adding up
the lengths of the individual packets in an isochronous transfer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Reported-and-tested-by: wlf <wulf@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/devio.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1833,6 +1833,18 @@ static int proc_unlinkurb(struct usb_dev
 	return 0;
 }
 
+static void compute_isochronous_actual_length(struct urb *urb)
+{
+	unsigned int i;
+
+	if (urb->number_of_packets > 0) {
+		urb->actual_length = 0;
+		for (i = 0; i < urb->number_of_packets; i++)
+			urb->actual_length +=
+					urb->iso_frame_desc[i].actual_length;
+	}
+}
+
 static int processcompl(struct async *as, void __user * __user *arg)
 {
 	struct urb *urb = as->urb;
@@ -1840,6 +1852,7 @@ static int processcompl(struct async *as
 	void __user *addr = as->userurb;
 	unsigned int i;
 
+	compute_isochronous_actual_length(urb);
 	if (as->userbuffer && urb->actual_length) {
 		if (copy_urb_data_to_user(as->userbuffer, urb))
 			goto err_out;
@@ -2008,6 +2021,7 @@ static int processcompl_compat(struct as
 	void __user *addr = as->userurb;
 	unsigned int i;
 
+	compute_isochronous_actual_length(urb);
 	if (as->userbuffer && urb->actual_length) {
 		if (copy_urb_data_to_user(as->userbuffer, urb))
 			return -EFAULT;

[PATCH 4.14 11/31] USB: Add delay-init quirk for Corsair K70 LUX keyboards

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernhard Rosenkraenzer <bernhard.rosenkranzer@linaro.org>

commit a0fea6027f19c62727315aba1a7fae75a9caa842 upstream.

Without this patch, K70 LUX keyboards don't work, saying
usb 3-3: unable to read config index 0 descriptor/all
usb 3-3: can't read configurations, error -110
usb usb3-port3: unable to enumerate USB device

Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -221,6 +221,9 @@ static const struct usb_device_id usb_qu
 	/* Corsair Strafe RGB */
 	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Corsair K70 LUX */
+	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* MIDI keyboard WORLDE MINI */
 	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },

[PATCH 4.14 12/31] usb: gadget: f_fs: Fix use-after-free in ffs_free_inst

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Gabbasov <andrew_gabbasov@mentor.com>

commit cdafb6d8b8da7fde266f79b3287ac221aa841879 upstream.

KASAN enabled configuration reports an error

BUG: KASAN: use-after-free in ffs_free_inst+... [usb_f_fs] at addr ...
Write of size 8 by task ...

This is observed after "ffs-test" is run and interrupted. If after that
functionfs is unmounted and g_ffs module is unloaded, that use-after-free
occurs during g_ffs module removal.

Although the report indicates ffs_free_inst() function, the actual
use-after-free condition occurs in _ffs_free_dev() function, which
is probably inlined into ffs_free_inst().

This happens due to keeping the ffs_data reference in device structure
during functionfs unmounting, while ffs_data itself is freed as no longer
needed. The fix is to clear that reference in ffs_closed() function,
which is a counterpart of ffs_ready(), where the reference is stored.

Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3677,6 +3677,7 @@ static void ffs_closed(struct ffs_data *
 		goto done;
 
 	ffs_obj->desc_ready = false;
+	ffs_obj->ffs_data = NULL;
 
 	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) &&
 	    ffs_obj->ffs_closed_callback)

[PATCH 4.14 13/31] USB: serial: metro-usb: stop I/O after failed open

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 2339536d229df25c71c0900fc619289229bfecf6 upstream.

Make sure to kill the interrupt-in URB after a failed open request.
Apart from saving power (and avoiding stale input after a later
successful open), this also prevents a NULL-deref in the completion
handler if the port is manually unbound.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 704577861d5e ("USB: serial: metro-usb: get data from device in Uni-Directional mode.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/metro-usb.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -189,7 +189,7 @@ static int metrousb_open(struct tty_stru
 		dev_err(&port->dev,
 			"%s - failed submitting interrupt in urb, error code=%d\n",
 			__func__, result);
-		goto exit;
+		return result;
 	}
 
 	/* Send activate cmd to device */
@@ -198,9 +198,14 @@ static int metrousb_open(struct tty_stru
 		dev_err(&port->dev,
 			"%s - failed to configure device, error code=%d\n",
 			__func__, result);
-		goto exit;
+		goto err_kill_urb;
 	}
-exit:
+
+	return 0;
+
+err_kill_urb:
+	usb_kill_urb(port->interrupt_in_urb);
+
 	return result;
 }
 

[PATCH 4.14 14/31] USB: serial: Change DbC debug device binding ID

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lu Baolu <baolu.lu@linux.intel.com>

commit 12f28144cf2cf69e1520e238eee7c384719ca44b upstream.

The product ID for "Linux USB GDB Target device" has been
changed. Change the driver binding table accordingly.

This patch should be back-ported to kernels as old as v4.12,
that contain the commit 57fb47279a04 ("usb/serial: Add DBC
debug device support to usb_debug").

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/usb_debug.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -34,13 +34,13 @@ static const struct usb_device_id id_tab
 };
 
 static const struct usb_device_id dbc_id_table[] = {
-	{ USB_DEVICE(0x1d6b, 0x0004) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
 	{ },
 };
 
 static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(0x0525, 0x127a) },
-	{ USB_DEVICE(0x1d6b, 0x0004) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table_combined);

[PATCH 4.14 15/31] USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Douglas Fischer <douglas.fischer@outlook.com>

commit 771394a54148f18926ca86414e51c69eda27d0cd upstream.

Add USB PID/VID for Sierra Wireless EM7355 LTE modem QDL firmware update
mode.

Signed-off-by: Douglas Fischer <douglas.fischer@outlook.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -148,6 +148,7 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
 	{DEVICE_SWI(0x1199, 0x68c0)},	/* Sierra Wireless MC7304/MC7354 */
 	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
+	{DEVICE_SWI(0x1199, 0x901e)},	/* Sierra Wireless EM7355 QDL */
 	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
 	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
 	{DEVICE_SWI(0x1199, 0x9041)},	/* Sierra Wireless MC7305/MC7355 */

[PATCH 4.14 16/31] USB: serial: garmin_gps: fix I/O after failed probe and remove

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 19a565d9af6e0d828bd0d521d3bafd5017f4ce52 upstream.

Make sure to stop any submitted interrupt and bulk-out URBs before
returning after failed probe and when the port is being unbound to avoid
later NULL-pointer dereferences in the completion callbacks.

Also fix up the related and broken I/O cancellation on failed open and
on close. (Note that port->write_urb was never submitted.)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/garmin_gps.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -138,6 +138,7 @@ struct garmin_data {
 	__u8   privpkt[4*6];
 	spinlock_t lock;
 	struct list_head pktlist;
+	struct usb_anchor write_urbs;
 };
 
 
@@ -905,7 +906,7 @@ static int garmin_init_session(struct us
 					sizeof(GARMIN_START_SESSION_REQ), 0);
 
 			if (status < 0)
-				break;
+				goto err_kill_urbs;
 		}
 
 		if (status > 0)
@@ -913,6 +914,12 @@ static int garmin_init_session(struct us
 	}
 
 	return status;
+
+err_kill_urbs:
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+	usb_kill_urb(port->interrupt_in_urb);
+
+	return status;
 }
 
 
@@ -930,7 +937,6 @@ static int garmin_open(struct tty_struct
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
-	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
 	if (garmin_data_p->state == STATE_RESET)
@@ -953,7 +959,7 @@ static void garmin_close(struct usb_seri
 
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 
 	/* keep reset state so we know that we must start a new session */
 	if (garmin_data_p->state != STATE_RESET)
@@ -1037,12 +1043,14 @@ static int garmin_write_bulk(struct usb_
 	}
 
 	/* send it down the pipe */
+	usb_anchor_urb(urb, &garmin_data_p->write_urbs);
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		dev_err(&port->dev,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		usb_unanchor_urb(urb);
 		kfree(buffer);
 	}
 
@@ -1401,6 +1409,7 @@ static int garmin_port_probe(struct usb_
 	garmin_data_p->state = 0;
 	garmin_data_p->flags = 0;
 	garmin_data_p->count = 0;
+	init_usb_anchor(&garmin_data_p->write_urbs);
 	usb_set_serial_port_data(port, garmin_data_p);
 
 	status = garmin_init_session(port);
@@ -1413,6 +1422,7 @@ static int garmin_port_remove(struct usb
 {
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
 	kfree(garmin_data_p);

[PATCH 4.14 17/31] USB: serial: garmin_gps: fix memory leak on probe errors

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 74d471b598444b7f2d964930f7234779c80960a0 upstream.

Make sure to free the port private data before returning after a failed
probe attempt.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/garmin_gps.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1413,6 +1413,12 @@ static int garmin_port_probe(struct usb_
 	usb_set_serial_port_data(port, garmin_data_p);
 
 	status = garmin_init_session(port);
+	if (status)
+		goto err_free;
+
+	return 0;
+err_free:
+	kfree(garmin_data_p);
 
 	return status;
 }

[PATCH 4.14 18/31] selftests/x86/protection_keys: Fix syscall NR redefinition warnings

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 693cb5580fdb026922363aa103add64b3ecd572e upstream.

On new enough glibc, the pkey syscalls numbers are available.  Check
first before defining them to avoid warnings like:

protection_keys.c:198:0: warning: "SYS_pkey_alloc" redefined

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1fbef53a9e6befb7165ff855fc1a7d4788a191d6.1509794321.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/protection_keys.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -189,17 +189,29 @@ void lots_o_noops_around_write(int *writ
 #define u64 uint64_t
 
 #ifdef __i386__
-#define SYS_mprotect_key 380
-#define SYS_pkey_alloc	 381
-#define SYS_pkey_free	 382
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key 380
+#endif
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc	 381
+# define SYS_pkey_free	 382
+#endif
 #define REG_IP_IDX REG_EIP
 #define si_pkey_offset 0x14
+
 #else
-#define SYS_mprotect_key 329
-#define SYS_pkey_alloc	 330
-#define SYS_pkey_free	 331
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key 329
+#endif
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc	 330
+# define SYS_pkey_free	 331
+#endif
 #define REG_IP_IDX REG_RIP
 #define si_pkey_offset 0x20
+
 #endif
 
 void dump_mem(void *dumpme, int len_bytes)

[PATCH 4.14 19/31] x86/MCE/AMD: Always give panic severity for UC errors in kernel context

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yazen Ghannam <yazen.ghannam@amd.com>

commit d65dfc81bb3894fdb68cbc74bbf5fb48d2354071 upstream.

The AMD severity grading function was introduced in kernel 4.1. The
current logic can possibly give MCE_AR_SEVERITY for uncorrectable
errors in kernel context. The system may then get stuck in a loop as
memory_failure() will try to handle the bad kernel memory and find it
busy.

Return MCE_PANIC_SEVERITY for all UC errors IN_KERNEL context on AMD
systems.

After:

  b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")

was accepted in v4.6, this issue was masked because of the tail-end attempt
at kernel mode recovery in the #MC handler.

However, uncorrectable errors IN_KERNEL context should always be considered
unrecoverable and cause a panic.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: bf80bbd7dcf5 (x86/mce: Add an AMD severities-grading function)
Link: http://lkml.kernel.org/r/20171106174633.13576-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mcheck/mce-severity.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -245,6 +245,9 @@ static int mce_severity_amd(struct mce *
 
 	if (m->status & MCI_STATUS_UC) {
 
+		if (ctx == IN_KERNEL)
+			return MCE_PANIC_SEVERITY;
+
 		/*
 		 * On older systems where overflow_recov flag is not present, we
 		 * should simply panic if an error overflow occurs. If
@@ -255,10 +258,6 @@ static int mce_severity_amd(struct mce *
 			if (mce_flags.smca)
 				return mce_severity_amd_smca(m, ctx);
 
-			/* software can try to contain */
-			if (!(m->mcgstatus & MCG_STATUS_RIPV) && (ctx == IN_KERNEL))
-				return MCE_PANIC_SEVERITY;
-
 			/* kill current process */
 			return MCE_AR_SEVERITY;
 		} else {

[PATCH 4.14 20/31] platform/x86: peaq-wmi: Add DMI check before binding to the WMI interface

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 3b95206110a2c13076c3a7fa8ddeae36c2dbcf42 upstream.

It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not
as unique as a GUID should be and is used on some other devices too.

This is causing spurious key-press reports on these other devices.

This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to
ensure that it is actually running on a PEAQ 2-in-1, fixing the
spurious key-presses on these other devices.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861
BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/peaq-wmi.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/platform/x86/peaq-wmi.c
+++ b/drivers/platform/x86/peaq-wmi.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/dmi.h>
 #include <linux/input-polldev.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -64,8 +65,22 @@ static void peaq_wmi_poll(struct input_p
 	}
 }
 
+/* Some other devices (Shuttle XS35) use the same WMI GUID for other purposes */
+static const struct dmi_system_id peaq_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
+		},
+	},
+};
+
 static int __init peaq_wmi_init(void)
 {
+	/* WMI GUID is not unique, also check for a DMI match */
+	if (!dmi_check_system(peaq_dmi_table))
+		return -ENODEV;
+
 	if (!wmi_has_guid(PEAQ_DOLBY_BUTTON_GUID))
 		return -ENODEV;
 
@@ -86,6 +101,9 @@ static int __init peaq_wmi_init(void)
 
 static void __exit peaq_wmi_exit(void)
 {
+	if (!dmi_check_system(peaq_dmi_table))
+		return;
+
 	if (!wmi_has_guid(PEAQ_DOLBY_BUTTON_GUID))
 		return;
 

[PATCH 4.14 21/31] platform/x86: peaq_wmi: Fix missing terminating entry for peaq_dmi_table

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit d6fa71f1c003fb2bc824276bb424a4171f9a717f upstream.

Add missing terminating entry to peaq_dmi_table.

Fixes: 3b95206110a2 ("platform/x86: peaq-wmi: Add DMI check before ...")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/peaq-wmi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/platform/x86/peaq-wmi.c
+++ b/drivers/platform/x86/peaq-wmi.c
@@ -73,6 +73,7 @@ static const struct dmi_system_id peaq_d
 			DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
 		},
 	},
+	{}
 };
 
 static int __init peaq_wmi_init(void)

[PATCH 4.14 23/31] HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Gerecke <killertofu@gmail.com>

commit 885e89f601a52cc6fb025b009df58ba83d142734 upstream.

The WACOM_PEN_FIELD macro is used to determine if a given HID field should be
associated with pen input. This field includes several known collection types
that Wacom pen data is contained in, but the WACOM_HID_WD_PEN application
collection type is notably missing. This can result in fields within this
kind of collection being completely ignored by the `wacom_usage_mapping`
function, preventing the later '*_event' functions from being notified about
changes to their value.

Fixes: c9c095874a ("HID: wacom: generic: Support and use 'Custom HID' mode and usages")
Fixes: ac2423c975 ("HID: wacom: generic: add vendor defined touch")
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_wac.h |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -166,6 +166,7 @@
 				 ((f)->physical == HID_DG_PEN) || \
 				 ((f)->application == HID_DG_PEN) || \
 				 ((f)->application == HID_DG_DIGITIZER) || \
+				 ((f)->application == WACOM_HID_WD_PEN) || \
 				 ((f)->application == WACOM_HID_WD_DIGITIZER) || \
 				 ((f)->application == WACOM_HID_G9_PEN) || \
 				 ((f)->application == WACOM_HID_G11_PEN))

[PATCH 4.14 24/31] rpmsg: glink: Add missing MODULE_LICENSE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson <bjorn.andersson@linaro.org>

commit 1e0d5615bbc37deb7732491798abccf8d3c3d244 upstream.

The qcom_glink_native driver is missing a MODULE_LICENSE(), correct
this.

Fixes: 835764ddd9af ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rpmsg/qcom_glink_native.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1616,3 +1616,6 @@ void qcom_glink_native_unregister(struct
 	device_unregister(glink->dev);
 }
 EXPORT_SYMBOL_GPL(qcom_glink_native_unregister);
+
+MODULE_DESCRIPTION("Qualcomm GLINK driver");
+MODULE_LICENSE("GPL v2");

[PATCH 4.14 25/31] staging: wilc1000: Fix bssid buffer offset in Txq

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aditya Shankar <aditya.shankar@microchip.com>

commit 1bbf6a6d4091affb27ec0a19d7aa7887ce72f610 upstream.

Commit 46949b48568b ("staging: wilc1000: New cfg packet
format in handle_set_wfi_drv_handler") updated the frame
format sent from host to the firmware. The code to update
the bssid offset in the new frame was part of a second
patch in the series which did not make it in and thus
causes connection problems after associating to an AP.

This fix adds the proper offset of the bssid value in the
Tx queue buffer to fix the connection issues.

Fixes: 46949b48568b ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler")
Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wilc1000/wilc_wlan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -714,7 +714,7 @@ int wilc_wlan_handle_txq(struct net_devi
 					char *bssid = ((struct tx_complete_data *)(tqe->priv))->bssid;
 
 					buffer_offset = ETH_ETHERNET_HDR_OFFSET;
-					memcpy(&txb[offset + 4], bssid, 6);
+					memcpy(&txb[offset + 8], bssid, 6);
 				} else {
 					buffer_offset = HOST_HDR_OFFSET;
 				}

[PATCH 4.14 26/31] staging: sm750fb: Fix parameter mistake in poke32

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 16808dcf605e6302319a8c3266789b76d4c0983b upstream.

In commit c075b6f2d357ea9 ("staging: sm750fb: Replace POKE32 and PEEK32
by inline functions"), POKE32 has been replaced by the inline function
poke32. But it exchange the "addr" and "data" parameters by mistake, so
fix it.

Fixes: c075b6f2d357ea9 ("staging: sm750fb: Replace POKE32 and PEEK32 by inline functions"),
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Liangliang Huang <huangll@lemote.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/sm750fb/ddk750_chip.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -18,7 +18,7 @@ static inline u32 peek32(u32 addr)
 	return readl(addr + mmio750);
 }
 
-static inline void poke32(u32 data, u32 addr)
+static inline void poke32(u32 addr, u32 data)
 {
 	writel(data, addr + mmio750);
 }

[PATCH 4.14 27/31] staging: ccree: fix 64 bit scatter/gather DMA ops

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gilad Ben-Yossef <gilad@benyossef.com>

commit e0b3f39092a1cff5548cbaf40096ec25e7721de6 upstream.

Fix a wrong offset used in splitting a 64 DMA address to MSB/LSB
parts needed for scatter/gather HW descriptors causing operations
relying on them to fail on 64 bit platforms.

Fixes: c6f7f2f4591f ("staging: ccree: refactor LLI access macros")
Reported-by: Stuart Yoder <stuart.yoder@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ccree/cc_lli_defs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/ccree/cc_lli_defs.h
+++ b/drivers/staging/ccree/cc_lli_defs.h
@@ -59,7 +59,7 @@ static inline void cc_lli_set_addr(u32 *
 	lli_p[LLI_WORD0_OFFSET] = (addr & U32_MAX);
 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
 	lli_p[LLI_WORD1_OFFSET] &= ~LLI_HADDR_MASK;
-	lli_p[LLI_WORD1_OFFSET] |= FIELD_PREP(LLI_HADDR_MASK, (addr >> 16));
+	lli_p[LLI_WORD1_OFFSET] |= FIELD_PREP(LLI_HADDR_MASK, (addr >> 32));
 #endif /* CONFIG_ARCH_DMA_ADDR_T_64BIT */
 }
 

[PATCH 4.14 28/31] staging: greybus: spilib: fix use-after-free after deregistration

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 770b03c2ca4aa44d226cf248f86aa23e546147d0 upstream.

Remove erroneous spi_master_put() after controller deregistration which
would access the already freed spi controller.

Note that spi_unregister_master() drops our only controller reference.

Fixes: ba3e67001b42 ("greybus: SPI: convert to a gpbridge driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/greybus/spilib.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/staging/greybus/spilib.c
+++ b/drivers/staging/greybus/spilib.c
@@ -544,12 +544,15 @@ int gb_spilib_master_init(struct gb_conn
 
 	return 0;
 
-exit_spi_unregister:
-	spi_unregister_master(master);
 exit_spi_put:
 	spi_master_put(master);
 
 	return ret;
+
+exit_spi_unregister:
+	spi_unregister_master(master);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gb_spilib_master_init);
 
@@ -558,7 +561,6 @@ void gb_spilib_master_exit(struct gb_con
 	struct spi_master *master = gb_connection_get_data(connection);
 
 	spi_unregister_master(master);
-	spi_master_put(master);
 }
 EXPORT_SYMBOL_GPL(gb_spilib_master_exit);
 

[PATCH 4.14 29/31] staging: vboxvideo: Fix reporting invalid suggested-offset-properties

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit ce10d7b4e8e3574b9616e54a09d64521b9aeb8b6 upstream.

The x and y hints receives from the host are unsigned 32 bit integers and
they get set to -1 (0xffffffff) when invalid. Before this commit the
vboxvideo driver was storing them in an u16 causing the -1 to be truncated
to 65535 which, once reported to userspace, was breaking gnome 3.26+
in Wayland mode.

This commit stores the host values in 32 bit variables, removing the
truncation and checks for -1, replacing it with 0 as -1 is not a valid
suggested-offset-property value. Likewise the properties are now
initialized to 0 instead of -1, since -1 is not a valid value.
This fixes gnome 3.26+ in Wayland mode not working with the vboxvideo
driver.

Reported-by: Gianfranco Costamagna <locutusofborg@debian.org>
Cc: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vboxvideo/vbox_drv.h  |    8 ++++----
 drivers/staging/vboxvideo/vbox_irq.c  |    4 ++--
 drivers/staging/vboxvideo/vbox_mode.c |   26 ++++++++++++++++++--------
 3 files changed, 24 insertions(+), 14 deletions(-)

--- a/drivers/staging/vboxvideo/vbox_drv.h
+++ b/drivers/staging/vboxvideo/vbox_drv.h
@@ -137,8 +137,8 @@ struct vbox_connector {
 	char name[32];
 	struct vbox_crtc *vbox_crtc;
 	struct {
-		u16 width;
-		u16 height;
+		u32 width;
+		u32 height;
 		bool disconnected;
 	} mode_hint;
 };
@@ -150,8 +150,8 @@ struct vbox_crtc {
 	unsigned int crtc_id;
 	u32 fb_offset;
 	bool cursor_enabled;
-	u16 x_hint;
-	u16 y_hint;
+	u32 x_hint;
+	u32 y_hint;
 };
 
 struct vbox_encoder {
--- a/drivers/staging/vboxvideo/vbox_irq.c
+++ b/drivers/staging/vboxvideo/vbox_irq.c
@@ -150,8 +150,8 @@ static void vbox_update_mode_hints(struc
 
 		disconnected = !(hints->enabled);
 		crtc_id = vbox_conn->vbox_crtc->crtc_id;
-		vbox_conn->mode_hint.width = hints->cx & 0x8fff;
-		vbox_conn->mode_hint.height = hints->cy & 0x8fff;
+		vbox_conn->mode_hint.width = hints->cx;
+		vbox_conn->mode_hint.height = hints->cy;
 		vbox_conn->vbox_crtc->x_hint = hints->dx;
 		vbox_conn->vbox_crtc->y_hint = hints->dy;
 		vbox_conn->mode_hint.disconnected = disconnected;
--- a/drivers/staging/vboxvideo/vbox_mode.c
+++ b/drivers/staging/vboxvideo/vbox_mode.c
@@ -553,12 +553,22 @@ static int vbox_get_modes(struct drm_con
 		++num_modes;
 	}
 	vbox_set_edid(connector, preferred_width, preferred_height);
-	drm_object_property_set_value(
-		&connector->base, vbox->dev->mode_config.suggested_x_property,
-		vbox_connector->vbox_crtc->x_hint);
-	drm_object_property_set_value(
-		&connector->base, vbox->dev->mode_config.suggested_y_property,
-		vbox_connector->vbox_crtc->y_hint);
+
+	if (vbox_connector->vbox_crtc->x_hint != -1)
+		drm_object_property_set_value(&connector->base,
+			vbox->dev->mode_config.suggested_x_property,
+			vbox_connector->vbox_crtc->x_hint);
+	else
+		drm_object_property_set_value(&connector->base,
+			vbox->dev->mode_config.suggested_x_property, 0);
+
+	if (vbox_connector->vbox_crtc->y_hint != -1)
+		drm_object_property_set_value(&connector->base,
+			vbox->dev->mode_config.suggested_y_property,
+			vbox_connector->vbox_crtc->y_hint);
+	else
+		drm_object_property_set_value(&connector->base,
+			vbox->dev->mode_config.suggested_y_property, 0);
 
 	return num_modes;
 }
@@ -640,9 +650,9 @@ static int vbox_connector_init(struct dr
 
 	drm_mode_create_suggested_offset_properties(dev);
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.suggested_x_property, -1);
+				   dev->mode_config.suggested_x_property, 0);
 	drm_object_attach_property(&connector->base,
-				   dev->mode_config.suggested_y_property, -1);
+				   dev->mode_config.suggested_y_property, 0);
 	drm_connector_register(connector);
 
 	drm_mode_connector_attach_encoder(connector, encoder);

[PATCH 4.14 30/31] staging: rtl8188eu: Revert 4 commits breaking ARP

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 66d32fdcbf03851724a8b551d490ae1ddfe6eef2 upstream.

Commit 2ba8444c97b1 ("staging:r8188eu: move IV/ICV trimming into
decrypt() and also place it after rtl88eu_mon_recv_hook()") breaks ARP.

After this commit ssh-ing to a laptop with r8188eu wifi no longer works
if the machine connecting has never communicated with the laptop before.
This is 100% reproducable using "arp -d <ipv4> && ssh <ipv4>" to ssh to
a laptop with r8188eu wifi.

This commit reverts 4 commits in total:

1. Commit 79650ffde38e ("staging:r8188eu: trim IV/ICV fields in
   validate_recv_data_frame()")
This commit depends on 2 of the other commits being reverted.

2. Commit 02b19b4c4920 ("staging:r8188eu: inline unprotect_frame() in
   mon_recv_decrypted_recv()")
The inline code is wrong the un-inlined version contains:
	if (skb->len < hdr_len + iv_len + icv_len)
		return;
	...
Where as the inline-ed code introduced by this commit does:
	if (skb->len < hdr_len + iv_len + icv_len) {
		...
Note the same check, but now to actually continue doing ... instead
of to not do it, so this commit is no good.

3. Commit d86e16da6a5d ("staging:r8188eu: use different mon_recv_decrypted()
   inside rtl88eu_mon_recv_hook() and rtl88eu_mon_xmit_hook().")
This commit introduced a 1:1 copy of a function so that one of the
2 copies can be modified in the 2 commits we're already reverting.

4. Commit 2ba8444c97b1 ("staging:r8188eu: move IV/ICV trimming into
   decrypt() and also place it after rtl88eu_mon_recv_hook()")
This is the commit actually breaking ARP.

Note this commit is a straight-forward squash of the revert of these
4 commits, without any changes.

Cc: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8188eu/core/rtw_recv.c |   83 ++++++++++++++++++------------
 drivers/staging/rtl8188eu/os_dep/mon.c    |   34 +-----------
 2 files changed, 55 insertions(+), 62 deletions(-)

--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -259,10 +259,12 @@ static int recvframe_chkmic(struct adapt
 			}
 
 			/* icv_len included the mic code */
-			datalen = precvframe->pkt->len-prxattrib->hdrlen - 8;
+			datalen = precvframe->pkt->len-prxattrib->hdrlen -
+				  prxattrib->iv_len-prxattrib->icv_len-8;
 			pframe = precvframe->pkt->data;
-			payload = pframe+prxattrib->hdrlen;
+			payload = pframe+prxattrib->hdrlen+prxattrib->iv_len;
 
+			RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("\n prxattrib->iv_len=%d prxattrib->icv_len=%d\n", prxattrib->iv_len, prxattrib->icv_len));
 			rtw_seccalctkipmic(mickey, pframe, payload, datalen, &miccode[0],
 					   (unsigned char)prxattrib->priority); /* care the length of the data */
 
@@ -407,15 +409,9 @@ static struct recv_frame *decryptor(stru
 		default:
 			break;
 		}
-		if (res != _FAIL) {
-			memmove(precv_frame->pkt->data + precv_frame->attrib.iv_len, precv_frame->pkt->data, precv_frame->attrib.hdrlen);
-			skb_pull(precv_frame->pkt, precv_frame->attrib.iv_len);
-			skb_trim(precv_frame->pkt, precv_frame->pkt->len - precv_frame->attrib.icv_len);
-		}
 	} else if (prxattrib->bdecrypted == 1 && prxattrib->encrypt > 0 &&
-		   (psecuritypriv->busetkipkey == 1 || prxattrib->encrypt != _TKIP_)) {
-		psecuritypriv->hw_decrypted = true;
-	}
+		   (psecuritypriv->busetkipkey == 1 || prxattrib->encrypt != _TKIP_))
+			psecuritypriv->hw_decrypted = true;
 
 	if (res == _FAIL) {
 		rtw_free_recvframe(return_packet, &padapter->recvpriv.free_recv_queue);
@@ -456,7 +452,7 @@ static struct recv_frame *portctrl(struc
 
 	if (auth_alg == 2) {
 		/* get ether_type */
-		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE;
+		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE + pfhdr->attrib.iv_len;
 		memcpy(&be_tmp, ptr, 2);
 		ether_type = ntohs(be_tmp);
 
@@ -1138,8 +1134,6 @@ static int validate_recv_data_frame(stru
 	}
 
 	if (pattrib->privacy) {
-		struct sk_buff *skb = precv_frame->pkt;
-
 		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("validate_recv_data_frame:pattrib->privacy=%x\n", pattrib->privacy));
 		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("\n ^^^^^^^^^^^IS_MCAST(pattrib->ra(0x%02x))=%d^^^^^^^^^^^^^^^6\n", pattrib->ra[0], IS_MCAST(pattrib->ra)));
 
@@ -1148,13 +1142,6 @@ static int validate_recv_data_frame(stru
 		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("\n pattrib->encrypt=%d\n", pattrib->encrypt));
 
 		SET_ICE_IV_LEN(pattrib->iv_len, pattrib->icv_len, pattrib->encrypt);
-
-		if (pattrib->bdecrypted == 1 && pattrib->encrypt > 0) {
-			memmove(skb->data + pattrib->iv_len,
-				skb->data, pattrib->hdrlen);
-			skb_pull(skb, pattrib->iv_len);
-			skb_trim(skb, skb->len - pattrib->icv_len);
-		}
 	} else {
 		pattrib->encrypt = 0;
 		pattrib->iv_len = 0;
@@ -1274,7 +1261,6 @@ static int validate_recv_frame(struct ad
 	 * Hence forward the frame to the monitor anyway to preserve the order
 	 * in which frames were received.
 	 */
-
 	rtl88eu_mon_recv_hook(adapter->pmondev, precv_frame);
 
 exit:
@@ -1296,8 +1282,11 @@ static int wlanhdr_to_ethhdr(struct recv
 	u8 *ptr = precvframe->pkt->data;
 	struct rx_pkt_attrib *pattrib = &precvframe->attrib;
 
-	psnap = (struct ieee80211_snap_hdr *)(ptr+pattrib->hdrlen);
-	psnap_type = ptr+pattrib->hdrlen + SNAP_SIZE;
+	if (pattrib->encrypt)
+		skb_trim(precvframe->pkt, precvframe->pkt->len - pattrib->icv_len);
+
+	psnap = (struct ieee80211_snap_hdr *)(ptr+pattrib->hdrlen + pattrib->iv_len);
+	psnap_type = ptr+pattrib->hdrlen + pattrib->iv_len+SNAP_SIZE;
 	/* convert hdr + possible LLC headers into Ethernet header */
 	if ((!memcmp(psnap, rtw_rfc1042_header, SNAP_SIZE) &&
 	     (!memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2) == false) &&
@@ -1310,9 +1299,12 @@ static int wlanhdr_to_ethhdr(struct recv
 		bsnaphdr = false;
 	}
 
-	rmv_len = pattrib->hdrlen + (bsnaphdr ? SNAP_SIZE : 0);
+	rmv_len = pattrib->hdrlen + pattrib->iv_len + (bsnaphdr ? SNAP_SIZE : 0);
 	len = precvframe->pkt->len - rmv_len;
 
+	RT_TRACE(_module_rtl871x_recv_c_, _drv_info_,
+		 ("\n===pattrib->hdrlen: %x,  pattrib->iv_len:%x===\n\n", pattrib->hdrlen,  pattrib->iv_len));
+
 	memcpy(&be_tmp, ptr+rmv_len, 2);
 	eth_type = ntohs(be_tmp); /* pattrib->ether_type */
 	pattrib->eth_type = eth_type;
@@ -1337,6 +1329,7 @@ static struct recv_frame *recvframe_defr
 					   struct __queue *defrag_q)
 {
 	struct list_head *plist, *phead;
+	u8 wlanhdr_offset;
 	u8	curfragnum;
 	struct recv_frame *pfhdr, *pnfhdr;
 	struct recv_frame *prframe, *pnextrframe;
@@ -1385,7 +1378,12 @@ static struct recv_frame *recvframe_defr
 		/* copy the 2nd~n fragment frame's payload to the first fragment */
 		/* get the 2nd~last fragment frame's payload */
 
-		skb_pull(pnextrframe->pkt, pnfhdr->attrib.hdrlen);
+		wlanhdr_offset = pnfhdr->attrib.hdrlen + pnfhdr->attrib.iv_len;
+
+		skb_pull(pnextrframe->pkt, wlanhdr_offset);
+
+		/* append  to first fragment frame's tail (if privacy frame, pull the ICV) */
+		skb_trim(prframe->pkt, prframe->pkt->len - pfhdr->attrib.icv_len);
 
 		/* memcpy */
 		memcpy(skb_tail_pointer(pfhdr->pkt), pnfhdr->pkt->data,
@@ -1393,7 +1391,7 @@ static struct recv_frame *recvframe_defr
 
 		skb_put(prframe->pkt, pnfhdr->pkt->len);
 
-		pfhdr->attrib.icv_len = 0;
+		pfhdr->attrib.icv_len = pnfhdr->attrib.icv_len;
 		plist = plist->next;
 	}
 
@@ -1519,6 +1517,11 @@ static int amsdu_to_msdu(struct adapter
 	nr_subframes = 0;
 	pattrib = &prframe->attrib;
 
+	skb_pull(prframe->pkt, prframe->attrib.hdrlen);
+
+	if (prframe->attrib.iv_len > 0)
+		skb_pull(prframe->pkt, prframe->attrib.iv_len);
+
 	a_len = prframe->pkt->len;
 
 	pdata = prframe->pkt->data;
@@ -1887,6 +1890,24 @@ static int process_recv_indicatepkts(str
 	return retval;
 }
 
+static int recv_func_prehandle(struct adapter *padapter,
+			       struct recv_frame *rframe)
+{
+	int ret = _SUCCESS;
+	struct __queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
+
+	/* check the frame crtl field and decache */
+	ret = validate_recv_frame(padapter, rframe);
+	if (ret != _SUCCESS) {
+		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("recv_func: validate_recv_frame fail! drop pkt\n"));
+		rtw_free_recvframe(rframe, pfree_recv_queue);/* free this recv_frame */
+		goto exit;
+	}
+
+exit:
+	return ret;
+}
+
 static int recv_func_posthandle(struct adapter *padapter,
 				struct recv_frame *prframe)
 {
@@ -1939,7 +1960,6 @@ static int recv_func(struct adapter *pad
 	struct rx_pkt_attrib *prxattrib = &rframe->attrib;
 	struct security_priv *psecuritypriv = &padapter->securitypriv;
 	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
-	struct __queue *pfree_recv_queue = &padapter->recvpriv.free_recv_queue;
 
 	/* check if need to handle uc_swdec_pending_queue*/
 	if (check_fwstate(mlmepriv, WIFI_STATION_STATE) && psecuritypriv->busetkipkey) {
@@ -1951,12 +1971,9 @@ static int recv_func(struct adapter *pad
 		}
 	}
 
-	/* check the frame crtl field and decache */
-	ret = validate_recv_frame(padapter, rframe);
-	if (ret != _SUCCESS) {
-		RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("recv_func: validate_recv_frame fail! drop pkt\n"));
-		rtw_free_recvframe(rframe, pfree_recv_queue);/* free this recv_frame */
-	} else {
+	ret = recv_func_prehandle(padapter, rframe);
+
+	if (ret == _SUCCESS) {
 		/* check if need to enqueue into uc_swdec_pending_queue*/
 		if (check_fwstate(mlmepriv, WIFI_STATION_STATE) &&
 		    !IS_MCAST(prxattrib->ra) && prxattrib->encrypt > 0 &&
--- a/drivers/staging/rtl8188eu/os_dep/mon.c
+++ b/drivers/staging/rtl8188eu/os_dep/mon.c
@@ -66,34 +66,6 @@ static void mon_recv_decrypted(struct ne
 	netif_rx(skb);
 }
 
-static void mon_recv_decrypted_recv(struct net_device *dev, const u8 *data,
-				    int data_len)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr *hdr;
-	int hdr_len;
-
-	skb = netdev_alloc_skb(dev, data_len);
-	if (!skb)
-		return;
-	memcpy(skb_put(skb, data_len), data, data_len);
-
-	/*
-	 * Frame data is not encrypted. Strip off protection so
-	 * userspace doesn't think that it is.
-	 */
-
-	hdr = (struct ieee80211_hdr *)skb->data;
-	hdr_len = ieee80211_hdrlen(hdr->frame_control);
-
-	if (ieee80211_has_protected(hdr->frame_control))
-		hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_PROTECTED);
-
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	skb->protocol = eth_type_trans(skb, dev);
-	netif_rx(skb);
-}
-
 static void mon_recv_encrypted(struct net_device *dev, const u8 *data,
 			       int data_len)
 {
@@ -110,6 +82,7 @@ static void mon_recv_encrypted(struct ne
 void rtl88eu_mon_recv_hook(struct net_device *dev, struct recv_frame *frame)
 {
 	struct rx_pkt_attrib *attr;
+	int iv_len, icv_len;
 	int data_len;
 	u8 *data;
 
@@ -122,8 +95,11 @@ void rtl88eu_mon_recv_hook(struct net_de
 	data = frame->pkt->data;
 	data_len = frame->pkt->len;
 
+	/* Broadcast and multicast frames don't have attr->{iv,icv}_len set */
+	SET_ICE_IV_LEN(iv_len, icv_len, attr->encrypt);
+
 	if (attr->bdecrypted)
-		mon_recv_decrypted_recv(dev, data, data_len);
+		mon_recv_decrypted(dev, data, data_len, iv_len, icv_len);
 	else
 		mon_recv_encrypted(dev, data, data_len);
 }

[PATCH 4.14 31/31] spi: fix use-after-free at controller deregistration

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 67f7b2781fafcc0f52464880154b320fea1ae982 upstream.

The controller is typically freed as part of device_unregister() so
store the bus id before deregistration to avoid use-after-free when the
id is later released.

Fixes: 9b61e302210e ("spi: Pick spi bus number from Linux idr or spi alias")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2245,11 +2245,12 @@ static int __unregister(struct device *d
 void spi_unregister_controller(struct spi_controller *ctlr)
 {
 	struct spi_controller *found;
+	int id = ctlr->bus_num;
 	int dummy;
 
 	/* First make sure that this controller was ever added */
 	mutex_lock(&board_lock);
-	found = idr_find(&spi_master_idr, ctlr->bus_num);
+	found = idr_find(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
 	if (found != ctlr) {
 		dev_dbg(&ctlr->dev,
@@ -2269,7 +2270,7 @@ void spi_unregister_controller(struct sp
 	device_unregister(&ctlr->dev);
 	/* free bus id */
 	mutex_lock(&board_lock);
-	idr_remove(&spi_master_idr, ctlr->bus_num);
+	idr_remove(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_controller);

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Guenter Roeck]

On 11/19/2017 06:59 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.1 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> Anything received after that time might be too late.
> 

Build results:
	total: 145 pass: 143 fail: 2
Failed builds:
	sparc32:allmodconfig
	sparc64:allmodconfig
Qemu test results:
	total: 123 pass: 123 fail: 0

Building sparc32:allmodconfig ... failed
--------------
Error log:
/opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c: In function 'i40e_set_priv_flags':
/opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c:4150:2: error: implicit declaration of function 'cmpxchg64'

Building sparc64:allmodconfig ... failed
--------------
Error log:
In file included from /opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context.h:5:0,
                  from /opt/buildbot/slave/stable-queue-4.14/build/include/linux/mmu_context.h:5,
                  from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:29,
                  from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:23:
/opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context_64.h:23:37: error: unknown type name 'per_cpu_secondary_mm'
[and more]

The errors are inherited from upstream (4.14) and have since been fixed there.

23198ddffb6c sparc32: Add cmpxchg64().
01c3f0a42a2a sparc64: mmu_context: Add missing include files

Guenter

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Ben Hutchings]

On Mon, 2017-11-20 at 06:27 -0800, Guenter Roeck wrote:
> On 11/19/2017 06:59 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.1 release.
> > There are 31 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 145 pass: 143 fail: 2
> Failed builds:
> 	sparc32:allmodconfig
> 	sparc64:allmodconfig
> Qemu test results:
> 	total: 123 pass: 123 fail: 0
> 
> Building sparc32:allmodconfig ... failed
> --------------
> Error log:
> /opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c: In function 'i40e_set_priv_flags':
> /opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c:4150:2: error: implicit declaration of function 'cmpxchg64'
>
> Building sparc64:allmodconfig ... failed
> --------------
> Error log:
> In file included from /opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context.h:5:0,
>                   from /opt/buildbot/slave/stable-queue-4.14/build/include/linux/mmu_context.h:5,
>                   from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:29,
>                   from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:23:
> /opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context_64.h:23:37: error: unknown type name 'per_cpu_secondary_mm'
> [and more]
> 
> The errors are inherited from upstream (4.14) and have since been fixed there.
> 
> 23198ddffb6c sparc32: Add cmpxchg64().
> 01c3f0a42a2a sparc64: mmu_context: Add missing include files

Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
cmpxchg64() appears to be fixed by:

b74f571f59a8 i40e/i40evf: organize and re-number feature flags
b48be9978e4b i40e: fix flags declaration

Ben.

> Guenter
> 
-- 
Ben Hutchings
Software Developer, Codethink Ltd.

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> On Mon, 2017-11-20 at 06:27 -0800, Guenter Roeck wrote:
> > On 11/19/2017 06:59 AM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.1 release.
> > > There are 31 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> > > Anything received after that time might be too late.
> > > 
> > 
> > Build results:
> > 	total: 145 pass: 143 fail: 2
> > Failed builds:
> > 	sparc32:allmodconfig
> > 	sparc64:allmodconfig
> > Qemu test results:
> > 	total: 123 pass: 123 fail: 0
> > 
> > Building sparc32:allmodconfig ... failed
> > --------------
> > Error log:
> > /opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c: In function 'i40e_set_priv_flags':
> > /opt/buildbot/slave/stable-queue-4.14/build/drivers/net/ethernet/intel/i40e/i40e_ethtool.c:4150:2: error: implicit declaration of function 'cmpxchg64'
> >
> > Building sparc64:allmodconfig ... failed
> > --------------
> > Error log:
> > In file included from /opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context.h:5:0,
> >                   from /opt/buildbot/slave/stable-queue-4.14/build/include/linux/mmu_context.h:5,
> >                   from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h:29,
> >                   from /opt/buildbot/slave/stable-queue-4.14/build/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:23:
> > /opt/buildbot/slave/stable-queue-4.14/build/arch/sparc/include/asm/mmu_context_64.h:23:37: error: unknown type name 'per_cpu_secondary_mm'
> > [and more]
> > 
> > The errors are inherited from upstream (4.14) and have since been fixed there.
> > 
> > 23198ddffb6c sparc32: Add cmpxchg64().
> > 01c3f0a42a2a sparc64: mmu_context: Add missing include files
> 
> Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> cmpxchg64() appears to be fixed by:
> 
> b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> b48be9978e4b i40e: fix flags declaration

So without those patches, are any specific arches/configs broken for
4.14?

thanks,

greg k-h

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Ben Hutchings]

On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
[...]
> > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > cmpxchg64() appears to be fixed by:
> > 
> > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > b48be9978e4b i40e: fix flags declaration
> 
> So without those patches, are any specific arches/configs broken for
> 4.14?

32-bit parisc is.

Ben.

-- 
Ben Hutchings
Software Developer, Codethink Ltd.

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> [...]
> > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > cmpxchg64() appears to be fixed by:
> > > 
> > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > b48be9978e4b i40e: fix flags declaration
> > 
> > So without those patches, are any specific arches/configs broken for
> > 4.14?
> 
> 32-bit parisc is.

Ok, but that's a horrid hack on the i40e driver, it just happens to move
the bitfield to a 32bit variable.  Can't we just provide a "real"
cmpxchg64() for 32-bit parisc?  Or mark this driver as not buildable on
that platform?

I doubt anyone is doing 40gb networking on parisc :)

thanks,

greg k-h

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Ben Hutchings]

On Tue, 2017-11-21 at 18:09 +0100, Greg Kroah-Hartman wrote:
> On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> > On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> > 
> > [...]
> > > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > > cmpxchg64() appears to be fixed by:
> > > > 
> > > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > > b48be9978e4b i40e: fix flags declaration
> > > 
> > > So without those patches, are any specific arches/configs broken for
> > > 4.14?
> > 
> > 32-bit parisc is.
> 
> Ok, but that's a horrid hack on the i40e driver, it just happens to move
> the bitfield to a 32bit variable.  Can't we just provide a "real"
> cmpxchg64() for 32-bit parisc?

No.  There is a generic implementation of cmpxchg64() but it is only
suitable for non-SMP configurations.

> Or mark this driver as not buildable on that platform?

I suggested adding a 'depends 64BIT' but got no response.

Ben.

> I doubt anyone is doing 40gb networking on parisc :)
> 
> thanks,
> 
> greg k-h
> 
-- 
Ben Hutchings
Software Developer, Codethink Ltd.

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Guenter Roeck]

On Tue, Nov 21, 2017 at 07:07:14PM +0000, Ben Hutchings wrote:
> On Tue, 2017-11-21 at 18:09 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> > > On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > > > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> > > 
> > > [...]
> > > > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > > > cmpxchg64() appears to be fixed by:
> > > > > 
> > > > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > > > b48be9978e4b i40e: fix flags declaration
> > > > 
> > > > So without those patches, are any specific arches/configs broken for
> > > > 4.14?
> > > 
> > > 32-bit parisc is.
> > 
> > Ok, but that's a horrid hack on the i40e driver, it just happens to move
> > the bitfield to a 32bit variable.  Can't we just provide a "real"
> > cmpxchg64() for 32-bit parisc?
> 
> No.  There is a generic implementation of cmpxchg64() but it is only
> suitable for non-SMP configurations.
> 

Dave implemented the following for sparc32 (in arch/sparc/lib/atomic32.c).

u64 __cmpxchg_u64(u64 *ptr, u64 old, u64 new)
{
        unsigned long flags;
	u64 prev;

	spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
	if ((prev = *ptr) == old)
		*ptr = new;
	spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
	return prev;
}
EXPORT_SYMBOL(__cmpxchg_u64);

Maybe something like this would work for other 32 bit architectures as well ?

Guenter

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Ben Hutchings]

On Tue, 2017-11-21 at 11:38 -0800, Guenter Roeck wrote:
> On Tue, Nov 21, 2017 at 07:07:14PM +0000, Ben Hutchings wrote:
> > On Tue, 2017-11-21 at 18:09 +0100, Greg Kroah-Hartman wrote:
> > > On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> > > > On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > > > > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> > > > 
> > > > [...]
> > > > > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > > > > cmpxchg64() appears to be fixed by:
> > > > > > 
> > > > > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > > > > b48be9978e4b i40e: fix flags declaration
> > > > > 
> > > > > So without those patches, are any specific arches/configs broken for
> > > > > 4.14?
> > > > 
> > > > 32-bit parisc is.
> > > 
> > > Ok, but that's a horrid hack on the i40e driver, it just happens to move
> > > the bitfield to a 32bit variable.  Can't we just provide a "real"
> > > cmpxchg64() for 32-bit parisc?
> > 
> > No.  There is a generic implementation of cmpxchg64() but it is only
> > suitable for non-SMP configurations.
> > 
> 
> Dave implemented the following for sparc32 (in arch/sparc/lib/atomic32.c).
> 
> u64 __cmpxchg_u64(u64 *ptr, u64 old, u64 new)
> {
> 	unsigned long flags;
> 	u64 prev;
> 
> 	spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
> 	if ((prev = *ptr) == old)
> 		*ptr = new;
> 	spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
> 	return prev;
> }
> EXPORT_SYMBOL(__cmpxchg_u64);
> 
> Maybe something like this would work for other 32 bit architectures as well ?

Yes, you're right, and we even have generic code for this in
lib/atomic64.c - but only for atomic64_t, not u64.

Ben.

-- 
Ben Hutchings
Software Developer, Codethink Ltd.

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

On Wed, Nov 22, 2017 at 04:06:42PM +0000, Ben Hutchings wrote:
> On Tue, 2017-11-21 at 11:38 -0800, Guenter Roeck wrote:
> > On Tue, Nov 21, 2017 at 07:07:14PM +0000, Ben Hutchings wrote:
> > > On Tue, 2017-11-21 at 18:09 +0100, Greg Kroah-Hartman wrote:
> > > > On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> > > > > On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > > > > > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> > > > > 
> > > > > [...]
> > > > > > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > > > > > cmpxchg64() appears to be fixed by:
> > > > > > > 
> > > > > > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > > > > > b48be9978e4b i40e: fix flags declaration
> > > > > > 
> > > > > > So without those patches, are any specific arches/configs broken for
> > > > > > 4.14?
> > > > > 
> > > > > 32-bit parisc is.
> > > > 
> > > > Ok, but that's a horrid hack on the i40e driver, it just happens to move
> > > > the bitfield to a 32bit variable.  Can't we just provide a "real"
> > > > cmpxchg64() for 32-bit parisc?
> > > 
> > > No.  There is a generic implementation of cmpxchg64() but it is only
> > > suitable for non-SMP configurations.
> > > 
> > 
> > Dave implemented the following for sparc32 (in arch/sparc/lib/atomic32.c).
> > 
> > u64 __cmpxchg_u64(u64 *ptr, u64 old, u64 new)
> > {
> > 	unsigned long flags;
> > 	u64 prev;
> > 
> > 	spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
> > 	if ((prev = *ptr) == old)
> > 		*ptr = new;
> > 	spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
> > 	return prev;
> > }
> > EXPORT_SYMBOL(__cmpxchg_u64);
> > 
> > Maybe something like this would work for other 32 bit architectures as well ?
> 
> Yes, you're right, and we even have generic code for this in
> lib/atomic64.c - but only for atomic64_t, not u64.

Ok, so, suggestions?   Is this actually a real issue that anyone is
hitting?  If they are, is it just a test-build, or a
real-world-I-need-this-driver situation?

thanks,

greg k-h

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Guenter Roeck]

On Wed, Nov 22, 2017 at 06:00:23PM +0100, Greg Kroah-Hartman wrote:
> On Wed, Nov 22, 2017 at 04:06:42PM +0000, Ben Hutchings wrote:
> > On Tue, 2017-11-21 at 11:38 -0800, Guenter Roeck wrote:
> > > On Tue, Nov 21, 2017 at 07:07:14PM +0000, Ben Hutchings wrote:
> > > > On Tue, 2017-11-21 at 18:09 +0100, Greg Kroah-Hartman wrote:
> > > > > On Tue, Nov 21, 2017 at 04:46:18PM +0000, Ben Hutchings wrote:
> > > > > > On Tue, 2017-11-21 at 17:35 +0100, Greg Kroah-Hartman wrote:
> > > > > > > On Tue, Nov 21, 2017 at 03:26:10PM +0000, Ben Hutchings wrote:
> > > > > > 
> > > > > > [...]
> > > > > > > > Not all 32-bit configurations can provide cmpxchg64().  i40e's use of
> > > > > > > > cmpxchg64() appears to be fixed by:
> > > > > > > > 
> > > > > > > > b74f571f59a8 i40e/i40evf: organize and re-number feature flags
> > > > > > > > b48be9978e4b i40e: fix flags declaration
> > > > > > > 
> > > > > > > So without those patches, are any specific arches/configs broken for
> > > > > > > 4.14?
> > > > > > 
> > > > > > 32-bit parisc is.
> > > > > 
> > > > > Ok, but that's a horrid hack on the i40e driver, it just happens to move
> > > > > the bitfield to a 32bit variable.  Can't we just provide a "real"
> > > > > cmpxchg64() for 32-bit parisc?
> > > > 
> > > > No.  There is a generic implementation of cmpxchg64() but it is only
> > > > suitable for non-SMP configurations.
> > > > 
> > > 
> > > Dave implemented the following for sparc32 (in arch/sparc/lib/atomic32.c).
> > > 
> > > u64 __cmpxchg_u64(u64 *ptr, u64 old, u64 new)
> > > {
> > > 	unsigned long flags;
> > > 	u64 prev;
> > > 
> > > 	spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
> > > 	if ((prev = *ptr) == old)
> > > 		*ptr = new;
> > > 	spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
> > > 	return prev;
> > > }
> > > EXPORT_SYMBOL(__cmpxchg_u64);
> > > 
> > > Maybe something like this would work for other 32 bit architectures as well ?
> > 
> > Yes, you're right, and we even have generic code for this in
> > lib/atomic64.c - but only for atomic64_t, not u64.
> 
> Ok, so, suggestions?   Is this actually a real issue that anyone is
> hitting?  If they are, is it just a test-build, or a
> real-world-I-need-this-driver situation?
> 

Long term it would be beneficial to have generic support for
cmpxchg_u64 for all architectures, but I have no real idea 
(nor strong opinion) if that would be useful to backport.

Big question here is if anyone uses the i40e driver in v4.14 on
any of the affected systems, and/or if anyone does regular test
builds which now fail (and if there is interest in keeping those
test builds going). I'd guess no one uses the driver on an affected
system, or at least no one cared enough to fix the problem while
v4.14 was in rc.

This leaves the testing question, which I can't really answer.
Are people still interested in test image build results ?

Guenter

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Guenter Roeck]

On Sun, Nov 19, 2017 at 03:59:34PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.1 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> Anything received after that time might be too late.
> 

Updated test results (v4.14-34-g00d25fc):

Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 123 pass: 123 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

On Mon, Nov 20, 2017 at 10:21:24AM -0800, Guenter Roeck wrote:
> On Sun, Nov 19, 2017 at 03:59:34PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.1 release.
> > There are 31 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> Updated test results (v4.14-34-g00d25fc):
> 
> Build results:
> 	total: 145 pass: 145 fail: 0
> Qemu test results:
> 	total: 123 pass: 123 fail: 0
> 
> Details are available at http://kerneltests.org/builders.

Wonderful, thanks for testing!

greg k-h

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Shuah Khan]

On 11/19/2017 07:59 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.1 release.
> There are 31 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.1-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.14 00/31] 4.14.1-stable review

[Greg Kroah-Hartman]

On Mon, Nov 20, 2017 at 02:19:56PM -0700, Shuah Khan wrote:
> On 11/19/2017 07:59 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.1 release.
> > There are 31 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Tue Nov 21 14:59:32 UTC 2017.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.1-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Wonderful, thanks for testing all of these and letting me know.

greg k-h