* [PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code
@ 2017-11-29 4:32 Travis Davies
2017-11-29 9:42 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Travis Davies @ 2017-11-29 4:32 UTC (permalink / raw)
To: gregkh, Larry.Finger; +Cc: kernel-janitors, linux-kernel
[PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code
My first patch.
This based from linux-next tree.
Removes code valid only for 5 HGz, as per the TODO, and also some formating issues.
If this device is only supported for sub 5GHZ hardware than this
change should not harm its intended audience. The caller
of Hal_GetChnlGroup88E() does not check for false.
Signed-off-by: Travis Davies <travisdavies.linuxkernel@gmail.com>
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 3673f57..28c31e3 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -387,59 +387,22 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
}
}
-static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
-{
- u8 bIn24G = true;
-
- if (chnl <= 14) {
- bIn24G = true;
-
- if (chnl < 3) /* Channel 1-2 */
- *pGroup = 0;
- else if (chnl < 6) /* Channel 3-5 */
- *pGroup = 1;
- else if (chnl < 9) /* Channel 6-8 */
- *pGroup = 2;
- else if (chnl < 12) /* Channel 9-11 */
- *pGroup = 3;
- else if (chnl < 14) /* Channel 12-13 */
- *pGroup = 4;
- else if (chnl == 14) /* Channel 14 */
- *pGroup = 5;
- } else {
-
- /* probably, this branch is suitable only for 5 GHz */
-
- bIn24G = false;
-
- if (chnl <= 40)
- *pGroup = 0;
- else if (chnl <= 48)
- *pGroup = 1;
- else if (chnl <= 56)
- *pGroup = 2;
- else if (chnl <= 64)
- *pGroup = 3;
- else if (chnl <= 104)
- *pGroup = 4;
- else if (chnl <= 112)
- *pGroup = 5;
- else if (chnl <= 120)
- *pGroup = 5;
- else if (chnl <= 128)
- *pGroup = 6;
- else if (chnl <= 136)
- *pGroup = 7;
- else if (chnl <= 144)
- *pGroup = 8;
- else if (chnl <= 153)
- *pGroup = 9;
- else if (chnl <= 161)
- *pGroup = 10;
- else if (chnl <= 177)
- *pGroup = 11;
- }
- return bIn24G;
+static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup) {
+
+ if (chnl < 3) /* Channel 1-2 */
+ *pGroup = 0;
+ else if (chnl < 6) /* Channel 3-5 */
+ *pGroup = 1;
+ else if (chnl < 9) /* Channel 6-8 */
+ *pGroup = 2;
+ else if (chnl < 12) /* Channel 9-11 */
+ *pGroup = 3;
+ else if (chnl < 14) /* Channel 12-13 */
+ *pGroup = 4;
+ else if (chnl == 14) /* Channel 14 */
+ *pGroup = 5;
+
+ return true;
}
void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
@@ -486,13 +449,13 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
pHalData->Index24G_BW40_Base[0][ch] = pwrInfo24G.IndexBW40_Base[0][4];
else
pHalData->Index24G_BW40_Base[0][ch] = pwrInfo24G.IndexBW40_Base[0][group];
- }
- if (bIn24G) {
+
DBG_88E("======= Path %d, Channel %d =======\n", 0, ch);
DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", 0, ch, pHalData->Index24G_CCK_Base[0][ch]);
DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", 0, ch, pHalData->Index24G_BW40_Base[0][ch]);
}
}
+
for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
pHalData->CCK_24G_Diff[0][TxCount] = pwrInfo24G.CCK_Diff[0][TxCount];
pHalData->OFDM_24G_Diff[0][TxCount] = pwrInfo24G.OFDM_Diff[0][TxCount];
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code
2017-11-29 4:32 [PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code Travis Davies
@ 2017-11-29 9:42 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2017-11-29 9:42 UTC (permalink / raw)
To: Travis Davies; +Cc: Larry.Finger, kernel-janitors, linux-kernel
On Tue, Nov 28, 2017 at 08:32:07PM -0800, Travis Davies wrote:
> [PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code
That is up in the subject line, no need to put it in the body.
> My first patch.
No need for that in the changelog :)
> This based from linux-next tree.
Nor that :)
> Removes code valid only for 5 HGz, as per the TODO, and also some formating issues.
But this line isn't formatted properly :(
> If this device is only supported for sub 5GHZ hardware than this
> change should not harm its intended audience. The caller
> of Hal_GetChnlGroup88E() does not check for false.
Were you able to test this?
> Signed-off-by: Travis Davies <travisdavies.linuxkernel@gmail.com>
>
>
> diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
> index 3673f57..28c31e3 100644
> --- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
> +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
> @@ -387,59 +387,22 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
> }
> }
>
> -static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
> -{
> - u8 bIn24G = true;
> -
> - if (chnl <= 14) {
> - bIn24G = true;
> -
> - if (chnl < 3) /* Channel 1-2 */
> - *pGroup = 0;
> - else if (chnl < 6) /* Channel 3-5 */
> - *pGroup = 1;
> - else if (chnl < 9) /* Channel 6-8 */
> - *pGroup = 2;
> - else if (chnl < 12) /* Channel 9-11 */
> - *pGroup = 3;
> - else if (chnl < 14) /* Channel 12-13 */
> - *pGroup = 4;
> - else if (chnl == 14) /* Channel 14 */
> - *pGroup = 5;
> - } else {
> -
> - /* probably, this branch is suitable only for 5 GHz */
> -
> - bIn24G = false;
> -
> - if (chnl <= 40)
> - *pGroup = 0;
> - else if (chnl <= 48)
> - *pGroup = 1;
> - else if (chnl <= 56)
> - *pGroup = 2;
> - else if (chnl <= 64)
> - *pGroup = 3;
> - else if (chnl <= 104)
> - *pGroup = 4;
> - else if (chnl <= 112)
> - *pGroup = 5;
> - else if (chnl <= 120)
> - *pGroup = 5;
> - else if (chnl <= 128)
> - *pGroup = 6;
> - else if (chnl <= 136)
> - *pGroup = 7;
> - else if (chnl <= 144)
> - *pGroup = 8;
> - else if (chnl <= 153)
> - *pGroup = 9;
> - else if (chnl <= 161)
> - *pGroup = 10;
> - else if (chnl <= 177)
> - *pGroup = 11;
> - }
> - return bIn24G;
> +static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup) {
> +
> + if (chnl < 3) /* Channel 1-2 */
> + *pGroup = 0;
No tabs?
Please always run scripts/checkpatch.pl on your patches.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-11-29 9:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-29 4:32 [PATCH] drivers/staging/rtl8188eu remove 5GHZ specific code Travis Davies
2017-11-29 9:42 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).