[PATCH 3.18 00/38] 3.18.90-stable review

[PATCH 3.18 00/38] 3.18.90-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.90 release.
There are 38 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Dec 24 08:44:40 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.90-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.90-rc1

Jacob Keller <jacob.e.keller@intel.com>
    fm10k: ensure we process SM mbx when processing VF mbx

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: PLOGI failures during NPIV testing

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: Fix secure firmware updates

Gabriele Paoloni <gabriele.paoloni@huawei.com>
    PCI/AER: Report non-fatal errors only to the affected endpoint

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    igb: check memory allocation failure

Stuart Hayes <stuart.w.hayes@gmail.com>
    PCI: Create SR-IOV virtfn/physfn links before attaching driver

Varun Prakash <varun@chelsio.com>
    scsi: cxgb4i: fix Tx skb leak

David Daney <david.daney@cavium.com>
    PCI: Avoid bus reset if bridge itself is broken

Dan Murphy <dmurphy@ti.com>
    net: phy: at803x: Change error to EINVAL for invalid MAC

Christian Lamparter <chunkeey@gmail.com>
    crypto: crypto4xx - increase context and scatter ring buffer elements

Derek Basehore <dbasehore@chromium.org>
    backlight: pwm_bl: Fix overflow condition

Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
    cpuidle: powernv: Pass correct drv->cpumask for registration

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

Adam Wallis <awallis@codeaurora.org>
    xhci: plat: Register shutdown for xhci_plat

Arnd Bergmann <arnd@arndb.de>
    isdn: kcapi: avoid uninitialized data

Reizer, Eyal <eyalr@ti.com>
    ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

Gao Feng <fgao@ikuai8.com>
    netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register

Liping Zhang <zlpnobody@gmail.com>
    netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table

Alexey Khoroshilov <khoroshilov@ispras.ru>
    irda: vlsi_ir: fix check for DMA mapping errors

Alexander Duyck <alexander.h.duyck@intel.com>
    i40e: Do not enable NAPI on q_vectors that have no rings

Alexander Duyck <alexander.h.duyck@intel.com>
    net: Do not allow negative values for busy_read and busy_poll sysctl interfaces

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: no ETH header for outbound AF_IUCV

Peter Stein <peter@stuntstein.dk>
    HID: xinmo: fix for out of range for THT 2P arcade controller.

Mike Looijmans <mike.looijmans@topic.nl>
    i2c: mux: pca954x: Add missing pca9546 definition to chip_desc

Arnd Bergmann <arnd@arndb.de>
    hwmon: (asus_atk0110) fix uninitialized data access

Rob Herring <robh@kernel.org>
    ARM: dts: ti: fix PCI bus dtc warnings

Wanpeng Li <wanpeng.li@hotmail.com>
    KVM: x86: correct async page present tracepoint

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: Fix PT2PT PRLI reject

Jeffy Chen <jeffy.chen@rock-chips.com>
    netfilter: nfnl_cthelper: Fix memory leak

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nfnl_cthelper: fix runtime expectation policy updates

Gustavo A. R. Silva <garsilva@embeddedor.com>
    usb: gadget: udc: remove pointer dereference after free

Roger Quadros <rogerq@ti.com>
    usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

Tony Lindgren <tony@atomide.com>
    net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

hayeswang <hayeswang@realtek.com>
    r8152: fix the list rx_done may be used without initialization

Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
    cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

Jaroslav Kysela <perex@perex.cz>
    ALSA: hda - add support for docking station for HP 820 G2

Steve Capper <steve.capper@arm.com>
    arm64: Initialise high_memory global variable earlier


-------------

Diffstat:

 Makefile                                     |   4 +-
 arch/arm/boot/dts/am335x-evmsk.dts           |   1 +
 arch/arm/boot/dts/dra7.dtsi                  |   2 +
 arch/arm/mm/dma-mapping.c                    |  20 +-
 arch/arm64/mm/init.c                         |   3 +-
 arch/x86/kvm/x86.c                           |   2 +-
 drivers/cpuidle/cpuidle-powernv.c            |  18 ++
 drivers/cpuidle/sysfs.c                      |  12 ++
 drivers/crypto/amcc/crypto4xx_core.h         |  10 +-
 drivers/hid/hid-core.c                       |   1 +
 drivers/hid/hid-ids.h                        |   1 +
 drivers/hid/hid-xinmo.c                      |   1 +
 drivers/hwmon/asus_atk0110.c                 |   3 +
 drivers/i2c/muxes/i2c-mux-pca954x.c          |   6 +-
 drivers/isdn/capi/kcapi.c                    |   1 +
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c |   3 +
 drivers/net/ethernet/intel/i40e/i40e_main.c  |  16 +-
 drivers/net/ethernet/intel/igb/igb_main.c    |   2 +
 drivers/net/irda/vlsi_ir.c                   |   8 +-
 drivers/net/phy/at803x.c                     |   2 +-
 drivers/net/usb/qmi_wwan.c                   |   4 +
 drivers/net/usb/r8152.c                      |   1 +
 drivers/pci/iov.c                            |   3 +-
 drivers/pci/pci.c                            |   4 +
 drivers/pci/pcie/aer/aerdrv_core.c           |   9 +-
 drivers/s390/net/qeth_l3_main.c              |  15 +-
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c           |   1 +
 drivers/scsi/lpfc/lpfc_els.c                 |   3 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c             |   3 +-
 drivers/scsi/lpfc/lpfc_hw4.h                 |   2 +-
 drivers/usb/gadget/function/f_uvc.c          |   8 +
 drivers/usb/gadget/udc/pch_udc.c             |   1 -
 drivers/usb/host/xhci-plat.c                 |   1 +
 drivers/video/backlight/pwm_bl.c             |   7 +-
 net/core/sysctl_net_core.c                   |   6 +-
 net/ipv4/netfilter/nf_nat_snmp_basic.c       |  19 +-
 net/netfilter/nfnetlink_cthelper.c           | 267 +++++++++++++++++----------
 net/netlink/af_netlink.c                     |  41 ++++
 sound/pci/hda/patch_realtek.c                |  14 +-
 39 files changed, 368 insertions(+), 157 deletions(-)

[PATCH 3.18 01/38] arm64: Initialise high_memory global variable earlier

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Capper <steve.capper@arm.com>

commit f24e5834a2c3f6c5f814a417f858226f0a010ade upstream.

The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.

We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.

This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.

This patch moves the initialisation of high_memory before it used.

Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/init.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -155,6 +155,8 @@ void __init arm64_memblock_init(void)
 	/* 4GB maximum for 32-bit only capable devices */
 	if (IS_ENABLED(CONFIG_ZONE_DMA))
 		dma_phys_limit = max_zone_dma_phys();
+
+	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 	dma_contiguous_reserve(dma_phys_limit);
 
 	memblock_allow_resize();
@@ -177,7 +179,6 @@ void __init bootmem_init(void)
 	sparse_init();
 	zone_sizes_init(min, max);
 
-	high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
 	max_pfn = max_low_pfn = max;
 }
 

[PATCH 3.18 02/38] ALSA: hda - add support for docking station for HP 820 G2

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaroslav Kysela <perex@perex.cz>


[ Upstream commit 04d5466a976b096364a39a63ac264c1b3a5f8fa1 ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4683,6 +4683,7 @@ enum {
 	ALC286_FIXUP_HP_GPIO_LED,
 	ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY,
 	ALC280_FIXUP_HP_DOCK_PINS,
+	ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED,
 	ALC280_FIXUP_HP_9480M,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
@@ -5216,6 +5217,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC280_FIXUP_HP_GPIO4
 	},
+	[ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x1b, 0x21011020 }, /* line-out */
+			{ 0x18, 0x2181103f }, /* line-in */
+			{ },
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_GPIO_MIC1_LED
+	},
 	[ALC280_FIXUP_HP_9480M] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc280_fixup_hp_9480m,
@@ -5388,7 +5399,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
-	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2263, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2264, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -5544,6 +5555,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC269_FIXUP_HEADSET_MIC, .name = "headset-mic"},
 	{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
 	{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
+	{.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"},
 	{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
 	{.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"},
 	{.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-dac-wcaps"},

[PATCH 3.18 03/38] cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>


[ Upstream commit ad0a45fd9c14feebd000b6e84189d0edff265170 ]

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpuidle/sysfs.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -613,6 +613,18 @@ int cpuidle_add_sysfs(struct cpuidle_dev
 	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
+	/*
+	 * Return if cpu_device is not setup for this CPU.
+	 *
+	 * This could happen if the arch did not set up cpu_device
+	 * since this CPU is not in cpu_present mask and the
+	 * driver did not send a correct CPU mask during registration.
+	 * Without this check we would end up passing bogus
+	 * value for &cpu_dev->kobj in kobject_init_and_add()
+	 */
+	if (!cpu_dev)
+		return -ENODEV;
+
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev)
 		return -ENOMEM;

[PATCH 3.18 04/38] r8152: fix the list rx_done may be used without initialization

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: hayeswang <hayeswang@realtek.com>


[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ]

The list rx_done would be initialized when the linking on occurs.
Therefore, if a napi is scheduled without any linking on before,
the following kernel panic would happen.

	BUG: unable to handle kernel NULL pointer dereference at 000000000000008
	IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152]
	PGD 0
	Oops: 0002 [#1] SMP

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1252,6 +1252,7 @@ static int alloc_all_mem(struct r8152 *t
 	spin_lock_init(&tp->tx_lock);
 	INIT_LIST_HEAD(&tp->rx_done);
 	INIT_LIST_HEAD(&tp->tx_free);
+	INIT_LIST_HEAD(&tp->rx_done);
 	skb_queue_head_init(&tp->tx_queue);
 
 	for (i = 0; i < RTL8152_MAX_RX; i++) {

[PATCH 3.18 05/38] crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>


[ Upstream commit 8a0f5ccfb33b0b8b51de65b7b3bf342ba10b4fb6 ]

On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote:
>
> Yes, please.
> Disregarding some reports is not a good way long term.

Please try this patch.

---8<---
Subject: [PATCH 3.18 05/38] netlink: Annotate nlk cb_mutex by protocol

Currently all occurences of nlk->cb_mutex are annotated by lockdep
as a single class.  This causes a false lcokdep cycle involving
genl and crypto_user.

This patch fixes it by dividing cb_mutex into individual classes
based on the netlink protocol.  As genl and crypto_user do not
use the same netlink protocol this breaks the false dependency
loop.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/af_netlink.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -93,6 +93,44 @@ EXPORT_SYMBOL_GPL(nl_table);
 
 static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait);
 
+static struct lock_class_key nlk_cb_mutex_keys[MAX_LINKS];
+
+static const char *const nlk_cb_mutex_key_strings[MAX_LINKS + 1] = {
+	"nlk_cb_mutex-ROUTE",
+	"nlk_cb_mutex-1",
+	"nlk_cb_mutex-USERSOCK",
+	"nlk_cb_mutex-FIREWALL",
+	"nlk_cb_mutex-SOCK_DIAG",
+	"nlk_cb_mutex-NFLOG",
+	"nlk_cb_mutex-XFRM",
+	"nlk_cb_mutex-SELINUX",
+	"nlk_cb_mutex-ISCSI",
+	"nlk_cb_mutex-AUDIT",
+	"nlk_cb_mutex-FIB_LOOKUP",
+	"nlk_cb_mutex-CONNECTOR",
+	"nlk_cb_mutex-NETFILTER",
+	"nlk_cb_mutex-IP6_FW",
+	"nlk_cb_mutex-DNRTMSG",
+	"nlk_cb_mutex-KOBJECT_UEVENT",
+	"nlk_cb_mutex-GENERIC",
+	"nlk_cb_mutex-17",
+	"nlk_cb_mutex-SCSITRANSPORT",
+	"nlk_cb_mutex-ECRYPTFS",
+	"nlk_cb_mutex-RDMA",
+	"nlk_cb_mutex-CRYPTO",
+	"nlk_cb_mutex-SMC",
+	"nlk_cb_mutex-23",
+	"nlk_cb_mutex-24",
+	"nlk_cb_mutex-25",
+	"nlk_cb_mutex-26",
+	"nlk_cb_mutex-27",
+	"nlk_cb_mutex-28",
+	"nlk_cb_mutex-29",
+	"nlk_cb_mutex-30",
+	"nlk_cb_mutex-31",
+	"nlk_cb_mutex-MAX_LINKS"
+};
+
 static int netlink_dump(struct sock *sk);
 static void netlink_skb_destructor(struct sk_buff *skb);
 
@@ -548,6 +586,9 @@ static int __netlink_create(struct net *
 	} else {
 		nlk->cb_mutex = &nlk->cb_def_mutex;
 		mutex_init(nlk->cb_mutex);
+		lockdep_set_class_and_name(nlk->cb_mutex,
+					   nlk_cb_mutex_keys + protocol,
+					   nlk_cb_mutex_key_strings[protocol]);
 	}
 	init_waitqueue_head(&nlk->wait);
 

[PATCH 3.18 07/38] usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>


[ Upstream commit 16bb05d98c904a4f6c5ce7e2d992299f794acbf2 ]

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uvc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -612,6 +612,14 @@ uvc_function_bind(struct usb_configurati
 	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
 	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
 
+	/* For SS, wMaxPacketSize has to be 1024 if bMaxBurst is not 0 */
+	if (opts->streaming_maxburst &&
+	    (opts->streaming_maxpacket % 1024) != 0) {
+		opts->streaming_maxpacket = roundup(opts->streaming_maxpacket, 1024);
+		INFO(cdev, "overriding streaming_maxpacket to %d\n",
+		     opts->streaming_maxpacket);
+	}
+
 	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
 	 * module parameters.
 	 *

[PATCH 3.18 08/38] usb: gadget: udc: remove pointer dereference after free

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>


[ Upstream commit 1f459262b0e1649a1e5ad12fa4c66eb76c2220ce ]

Remove pointer dereference after free.

Addresses-Coverity-ID: 1091173
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/pch_udc.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1533,7 +1533,6 @@ static void pch_udc_free_dma_chain(struc
 		td = phys_to_virt(addr);
 		addr2 = (dma_addr_t)td->next;
 		pci_pool_free(dev->data_requests, td, addr);
-		td->next = 0x00;
 		addr = addr2;
 	}
 	req->chain_len = 1;

[PATCH 3.18 09/38] netfilter: nfnl_cthelper: fix runtime expectation policy updates

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>


[ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ]

We only allow runtime updates of expectation policies for timeout and
maximum number of expectations, otherwise reject the update.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |   86 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -256,6 +256,89 @@ err:
 }
 
 static int
+nfnl_cthelper_update_policy_one(const struct nf_conntrack_expect_policy *policy,
+				struct nf_conntrack_expect_policy *new_policy,
+				const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_MAX + 1];
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_MAX, attr,
+			       nfnl_cthelper_expect_pol);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_NAME] ||
+	    !tb[NFCTH_POLICY_EXPECT_MAX] ||
+	    !tb[NFCTH_POLICY_EXPECT_TIMEOUT])
+		return -EINVAL;
+
+	if (nla_strcmp(tb[NFCTH_POLICY_NAME], policy->name))
+		return -EBUSY;
+
+	new_policy->max_expected =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_MAX]));
+	new_policy->timeout =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_TIMEOUT]));
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy_all(struct nlattr *tb[],
+					   struct nf_conntrack_helper *helper)
+{
+	struct nf_conntrack_expect_policy new_policy[helper->expect_class_max + 1];
+	struct nf_conntrack_expect_policy *policy;
+	int i, err;
+
+	/* Check first that all policy attributes are well-formed, so we don't
+	 * leave things in inconsistent state on errors.
+	 */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+
+		if (!tb[NFCTH_POLICY_SET + i])
+			return -EINVAL;
+
+		err = nfnl_cthelper_update_policy_one(&helper->expect_policy[i],
+						      &new_policy[i],
+						      tb[NFCTH_POLICY_SET + i]);
+		if (err < 0)
+			return err;
+	}
+	/* Now we can safely update them. */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+		policy = (struct nf_conntrack_expect_policy *)
+				&helper->expect_policy[i];
+		policy->max_expected = new_policy->max_expected;
+		policy->timeout	= new_policy->timeout;
+	}
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy(struct nf_conntrack_helper *helper,
+				       const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_SET_MAX + 1];
+	unsigned int class_max;
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_SET_MAX, attr,
+			       nfnl_cthelper_expect_policy_set);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_SET_NUM])
+		return -EINVAL;
+
+	class_max = ntohl(nla_get_be32(tb[NFCTH_POLICY_SET_NUM]));
+	if (helper->expect_class_max + 1 != class_max)
+		return -EBUSY;
+
+	return nfnl_cthelper_update_policy_all(tb, helper);
+}
+
+static int
 nfnl_cthelper_update(const struct nlattr * const tb[],
 		     struct nf_conntrack_helper *helper)
 {
@@ -265,8 +348,7 @@ nfnl_cthelper_update(const struct nlattr
 		return -EBUSY;
 
 	if (tb[NFCTH_POLICY]) {
-		ret = nfnl_cthelper_parse_expect_policy(helper,
-							tb[NFCTH_POLICY]);
+		ret = nfnl_cthelper_update_policy(helper, tb[NFCTH_POLICY]);
 		if (ret < 0)
 			return ret;
 	}

[PATCH 3.18 10/38] netfilter: nfnl_cthelper: Fix memory leak

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeffy Chen <jeffy.chen@rock-chips.com>


[ Upstream commit f83bf8da1135ca635aac8f062cad3f001fcf3a26 ]

We have memory leaks of nf_conntrack_helper & expect_policy.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -216,7 +216,7 @@ nfnl_cthelper_create(const struct nlattr
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
-		goto err;
+		goto err1;
 
 	strncpy(helper->name, nla_data(tb[NFCTH_NAME]), NF_CT_HELPER_NAME_LEN);
 	helper->data_len = ntohl(nla_get_be32(tb[NFCTH_PRIV_DATA_LEN]));
@@ -247,10 +247,12 @@ nfnl_cthelper_create(const struct nlattr
 
 	ret = nf_conntrack_helper_register(helper);
 	if (ret < 0)
-		goto err;
+		goto err2;
 
 	return 0;
-err:
+err2:
+	kfree(helper->expect_policy);
+err1:
 	kfree(helper);
 	return ret;
 }
@@ -696,6 +698,8 @@ nfnl_cthelper_del(struct sock *nfnl, str
 
 			found = true;
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 	/* Make sure we return success if we flush and there is no helpers */
@@ -759,6 +763,8 @@ static void __exit nfnl_cthelper_exit(vo
 				continue;
 
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 }

[PATCH 3.18 11/38] scsi: lpfc: Fix PT2PT PRLI reject

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_els.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -6870,7 +6870,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *p
 			did, vport->port_state, ndlp->nlp_flag);
 
 		phba->fc_stat.elsRcvPRLI++;
-		if (vport->port_state < LPFC_DISC_AUTH) {
+		if ((vport->port_state < LPFC_DISC_AUTH) &&
+		    (vport->fc_flag & FC_FABRIC)) {
 			rjt_err = LSRJT_UNABLE_TPC;
 			rjt_exp = LSEXP_NOTHING_MORE;
 			break;

[PATCH 3.18 14/38] hwmon: (asus_atk0110) fix uninitialized data access

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit a2125d02443e9a4e68bcfd9f8004fa23239e8329 ]

The latest gcc-7 snapshot adds a warning to point out that when
atk_read_value_old or atk_read_value_new fails, we copy
uninitialized data into sensor->cached_value:

drivers/hwmon/asus_atk0110.c: In function 'atk_input_show':
drivers/hwmon/asus_atk0110.c:651:26: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Adding an error check avoids this. All versions of the driver
are affected.

Fixes: 2c03d07ad54d ("hwmon: Add Asus ATK0110 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/asus_atk0110.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -646,6 +646,9 @@ static int atk_read_value(struct atk_sen
 		else
 			err = atk_read_value_new(sensor, value);
 
+		if (err)
+			return err;
+
 		sensor->is_valid = true;
 		sensor->last_updated = jiffies;
 		sensor->cached_value = *value;

[PATCH 3.18 15/38] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <mike.looijmans@topic.nl>


[ Upstream commit dbe4d69d252e9e65c6c46826980b77b11a142065 ]

The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/muxes/i2c-mux-pca954x.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -93,6 +93,10 @@ static const struct chip_desc chips[] =
 		.nchans = 4,
 		.muxtype = pca954x_isswi,
 	},
+	[pca_9546] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+	},
 	[pca_9547] = {
 		.nchans = 8,
 		.enable = 0x8,
@@ -110,7 +114,7 @@ static const struct i2c_device_id pca954
 	{ "pca9543", pca_9543 },
 	{ "pca9544", pca_9544 },
 	{ "pca9545", pca_9545 },
-	{ "pca9546", pca_9545 },
+	{ "pca9546", pca_9546 },
 	{ "pca9547", pca_9547 },
 	{ "pca9548", pca_9548 },
 	{ }

[PATCH 3.18 16/38] HID: xinmo: fix for out of range for THT 2P arcade controller.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Stein <peter@stuntstein.dk>


[ Upstream commit 9257821c5a1dc57ef3a37f7cbcebaf548395c964 ]

There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original.  This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1.  In details the new device ID is added the
hid-id list and the hid-xinmo source code.

Signed-off-by: Peter Stein <peter@stuntstein.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c  |    1 +
 drivers/hid/hid-ids.h   |    1 +
 drivers/hid/hid-xinmo.c |    1 +
 3 files changed, 3 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1977,6 +1977,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1000,6 +1000,7 @@
 
 #define USB_VENDOR_ID_XIN_MO			0x16c0
 #define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE	0x05e1
+#define USB_DEVICE_ID_THT_2P_ARCADE		0x75e1
 
 #define USB_VENDOR_ID_XIROKU		0x1477
 #define USB_DEVICE_ID_XIROKU_SPX	0x1006
--- a/drivers/hid/hid-xinmo.c
+++ b/drivers/hid/hid-xinmo.c
@@ -46,6 +46,7 @@ static int xinmo_event(struct hid_device
 
 static const struct hid_device_id xinmo_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ }
 };
 

[PATCH 3.18 17/38] s390/qeth: no ETH header for outbound AF_IUCV

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit acd9776b5c45ef02d1a210969a6fcc058afb76e3 ]

With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte
slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr()
fills this ETH header... and then immediately moves it to the
skb's headroom, where it disappears and is never seen again.

But it's still possible for us to return NETDEV_TX_BUSY after the skb has
been modified. Since we didn't get a private copy of the skb, the next
time the skb is delivered to hard_start_xmit() it no longer has the
expected layout (we moved the ETH header to the headroom, so skb->data
now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr()
does another round of rebuilding, the resulting qeth header ends up
all wrong. On transmission, the buffer is then rejected by
the HiperSockets device with SBALF15 = x'04'.
When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it
tears down the offending socket.

As the ETH header for AF_IUCV serves no purpose, just align the code to
what we do for IP traffic on L3 HiperSockets: keep the ETH header at
skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer().
When mapping the payload into the SBAL elements, the ETH header is then
stripped off. This avoids the skb manipulations in
qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit()
after NETDEV_TX_BUSY is now processed properly.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l3_main.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2769,17 +2769,13 @@ static void qeth_l3_fill_af_iucv_hdr(str
 	char daddr[16];
 	struct af_iucv_trans_hdr *iucv_hdr;
 
-	skb_pull(skb, 14);
-	card->dev->header_ops->create(skb, card->dev, 0,
-				      card->dev->dev_addr, card->dev->dev_addr,
-				      card->dev->addr_len);
-	skb_pull(skb, 14);
-	iucv_hdr = (struct af_iucv_trans_hdr *)skb->data;
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3;
 	hdr->hdr.l3.ext_flags = 0;
-	hdr->hdr.l3.length = skb->len;
+	hdr->hdr.l3.length = skb->len - ETH_HLEN;
 	hdr->hdr.l3.flags = QETH_HDR_IPV6 | QETH_CAST_UNICAST;
+
+	iucv_hdr = (struct af_iucv_trans_hdr *) (skb->data + ETH_HLEN);
 	memset(daddr, 0, sizeof(daddr));
 	daddr[0] = 0xfe;
 	daddr[1] = 0x80;
@@ -2962,10 +2958,7 @@ static int qeth_l3_hard_start_xmit(struc
 	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
 	    (skb_shinfo(skb)->nr_frags == 0)) {
 		new_skb = skb;
-		if (new_skb->protocol == ETH_P_AF_IUCV)
-			data_offset = 0;
-		else
-			data_offset = ETH_HLEN;
+		data_offset = ETH_HLEN;
 		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
 		if (!hdr)
 			goto tx_drop;

[PATCH 3.18 18/38] net: Do not allow negative values for busy_read and busy_poll sysctl interfaces

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Duyck <alexander.h.duyck@intel.com>


[ Upstream commit 95f255211396958c718aef8c45e3923b5211ea7b ]

This change basically codifies what I think was already the limitations on
the busy_poll and busy_read sysctl interfaces.  We weren't checking the
lower bounds and as such could input negative values. The behavior when
that was used was dependent on the architecture. In order to prevent any
issues with that I am just disabling support for values less than 0 since
this way we don't have to worry about any odd behaviors.

By limiting the sysctl values this way it also makes it consistent with how
we handle the SO_BUSY_POLL socket option since the value appears to be
reported as a signed integer value and negative values are rejected.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sysctl_net_core.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -331,14 +331,16 @@ static struct ctl_table net_core_table[]
 		.data		= &sysctl_net_busy_poll,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 	{
 		.procname	= "busy_read",
 		.data		= &sysctl_net_busy_read,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 #endif
 #ifdef CONFIG_NET_SCHED

[PATCH 3.18 19/38] i40e: Do not enable NAPI on q_vectors that have no rings

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Duyck <alexander.h.duyck@intel.com>


[ Upstream commit 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c ]

When testing the epoll w/ busy poll code I found that I could get into a
state where the i40e driver had q_vectors w/ active NAPI that had no rings.
This was resulting in a divide by zero error.  To correct it I am updating
the driver code so that we only support NAPI on q_vectors that have 1 or
more rings allocated to them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3814,8 +3814,12 @@ static void i40e_napi_enable_all(struct
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_enable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_enable(&q_vector->napi);
+	}
 }
 
 /**
@@ -3829,8 +3833,12 @@ static void i40e_napi_disable_all(struct
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_disable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_disable(&q_vector->napi);
+	}
 }
 
 /**

[PATCH 3.18 20/38] irda: vlsi_ir: fix check for DMA mapping errors

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>


[ Upstream commit 6ac3b77a6ffff7513ff86b684aa256ea01c0e5b5 ]

vlsi_alloc_ring() checks for DMA mapping errors by comparing
returned address with zero, while pci_dma_mapping_error() should be used.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/irda/vlsi_ir.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -426,8 +426,9 @@ static struct vlsi_ring *vlsi_alloc_ring
 		memset(rd, 0, sizeof(*rd));
 		rd->hw = hwmap + i;
 		rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
-		if (rd->buf == NULL ||
-		    !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+		if (rd->buf)
+			busaddr = pci_map_single(pdev, rd->buf, len, dir);
+		if (rd->buf == NULL || pci_dma_mapping_error(pdev, busaddr)) {
 			if (rd->buf) {
 				IRDA_ERROR("%s: failed to create PCI-MAP for %p",
 					   __func__, rd->buf);
@@ -438,8 +439,7 @@ static struct vlsi_ring *vlsi_alloc_ring
 				rd = r->rd + j;
 				busaddr = rd_get_addr(rd);
 				rd_set_addr_status(rd, 0, 0);
-				if (busaddr)
-					pci_unmap_single(pdev, busaddr, len, dir);
+				pci_unmap_single(pdev, busaddr, len, dir);
 				kfree(rd->buf);
 				rd->buf = NULL;
 			}

[PATCH 3.18 21/38] netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liping Zhang <zlpnobody@gmail.com>


[ Upstream commit 83d90219a5df8d950855ce73229a97b63605c317 ]

The nf_ct_helper_hash table is protected by nf_ct_helper_mutex, while
nfct_helper operation is protected by nfnl_lock(NFNL_SUBSYS_CTHELPER).
So it's possible that one CPU is walking the nf_ct_helper_hash for
cthelper add/get/del, another cpu is doing nf_conntrack_helpers_unregister
at the same time. This is dangrous, and may cause use after free error.

Note, delete operation will flush all cthelpers added via nfnetlink, so
using rcu to do protect is not easy.

Now introduce a dummy list to record all the cthelpers added via
nfnetlink, then we can walk the dummy list instead of walking the
nf_ct_helper_hash. Also, keep nfnl_cthelper_dump_table unchanged, it
may be invoked without nfnl_lock(NFNL_SUBSYS_CTHELPER) held.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |  185 +++++++++++++++++--------------------
 1 file changed, 85 insertions(+), 100 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -32,6 +32,13 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
 MODULE_DESCRIPTION("nfnl_cthelper: User-space connection tracking helpers");
 
+struct nfnl_cthelper {
+	struct list_head		list;
+	struct nf_conntrack_helper	helper;
+};
+
+static LIST_HEAD(nfnl_cthelper_list);
+
 static int
 nfnl_userspace_cthelper(struct sk_buff *skb, unsigned int protoff,
 			struct nf_conn *ct, enum ip_conntrack_info ctinfo)
@@ -205,14 +212,16 @@ nfnl_cthelper_create(const struct nlattr
 		     struct nf_conntrack_tuple *tuple)
 {
 	struct nf_conntrack_helper *helper;
+	struct nfnl_cthelper *nfcth;
 	int ret;
 
 	if (!tb[NFCTH_TUPLE] || !tb[NFCTH_POLICY] || !tb[NFCTH_PRIV_DATA_LEN])
 		return -EINVAL;
 
-	helper = kzalloc(sizeof(struct nf_conntrack_helper), GFP_KERNEL);
-	if (helper == NULL)
+	nfcth = kzalloc(sizeof(*nfcth), GFP_KERNEL);
+	if (nfcth == NULL)
 		return -ENOMEM;
+	helper = &nfcth->helper;
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
@@ -249,11 +258,12 @@ nfnl_cthelper_create(const struct nlattr
 	if (ret < 0)
 		goto err2;
 
+	list_add_tail(&nfcth->list, &nfnl_cthelper_list);
 	return 0;
 err2:
 	kfree(helper->expect_policy);
 err1:
-	kfree(helper);
+	kfree(nfcth);
 	return ret;
 }
 
@@ -379,7 +389,8 @@ nfnl_cthelper_new(struct sock *nfnl, str
 	const char *helper_name;
 	struct nf_conntrack_helper *cur, *helper = NULL;
 	struct nf_conntrack_tuple tuple;
-	int ret = 0, i;
+	struct nfnl_cthelper *nlcth;
+	int ret = 0;
 
 	if (!tb[NFCTH_NAME] || !tb[NFCTH_TUPLE])
 		return -EINVAL;
@@ -390,31 +401,22 @@ nfnl_cthelper_new(struct sock *nfnl, str
 	if (ret < 0)
 		return ret;
 
-	rcu_read_lock();
-	for (i = 0; i < nf_ct_helper_hsize && !helper; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+		if (strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
 
-			if (strncmp(cur->name, helper_name,
-					NF_CT_HELPER_NAME_LEN) != 0)
-				continue;
+		if ((tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
 
-			if ((tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			return -EEXIST;
 
-			if (nlh->nlmsg_flags & NLM_F_EXCL) {
-				ret = -EEXIST;
-				goto err;
-			}
-			helper = cur;
-			break;
-		}
+		helper = cur;
+		break;
 	}
-	rcu_read_unlock();
 
 	if (helper == NULL)
 		ret = nfnl_cthelper_create(tb, &tuple);
@@ -422,9 +424,6 @@ nfnl_cthelper_new(struct sock *nfnl, str
 		ret = nfnl_cthelper_update(tb, helper);
 
 	return ret;
-err:
-	rcu_read_unlock();
-	return ret;
 }
 
 static int
@@ -588,11 +587,12 @@ static int
 nfnl_cthelper_get(struct sock *nfnl, struct sk_buff *skb,
 		  const struct nlmsghdr *nlh, const struct nlattr * const tb[])
 {
-	int ret = -ENOENT, i;
+	int ret = -ENOENT;
 	struct nf_conntrack_helper *cur;
 	struct sk_buff *skb2;
 	char *helper_name = NULL;
 	struct nf_conntrack_tuple tuple;
+	struct nfnl_cthelper *nlcth;
 	bool tuple_set = false;
 
 	if (nlh->nlmsg_flags & NLM_F_DUMP) {
@@ -613,45 +613,39 @@ nfnl_cthelper_get(struct sock *nfnl, str
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
-
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
-
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
-
-			skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
-			if (skb2 == NULL) {
-				ret = -ENOMEM;
-				break;
-			}
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
+
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
+
+		skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+		if (skb2 == NULL) {
+			ret = -ENOMEM;
+			break;
+		}
 
-			ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
-						nlh->nlmsg_seq,
-						NFNL_MSG_TYPE(nlh->nlmsg_type),
-						NFNL_MSG_CTHELPER_NEW, cur);
-			if (ret <= 0) {
-				kfree_skb(skb2);
-				break;
-			}
+		ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
+					      nlh->nlmsg_seq,
+					      NFNL_MSG_TYPE(nlh->nlmsg_type),
+					      NFNL_MSG_CTHELPER_NEW, cur);
+		if (ret <= 0) {
+			kfree_skb(skb2);
+			break;
+		}
 
-			ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
-						MSG_DONTWAIT);
-			if (ret > 0)
-				ret = 0;
+		ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
+				      MSG_DONTWAIT);
+		if (ret > 0)
+			ret = 0;
 
-			/* this avoids a loop in nfnetlink. */
-			return ret == -EAGAIN ? -ENOBUFS : ret;
-		}
+		/* this avoids a loop in nfnetlink. */
+		return ret == -EAGAIN ? -ENOBUFS : ret;
 	}
 	return ret;
 }
@@ -662,10 +656,10 @@ nfnl_cthelper_del(struct sock *nfnl, str
 {
 	char *helper_name = NULL;
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
 	struct nf_conntrack_tuple tuple;
 	bool tuple_set = false, found = false;
-	int i, j = 0, ret;
+	struct nfnl_cthelper *nlcth, *n;
+	int j = 0, ret;
 
 	if (tb[NFCTH_NAME])
 		helper_name = nla_data(tb[NFCTH_NAME]);
@@ -678,30 +672,27 @@ nfnl_cthelper_del(struct sock *nfnl, str
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-								hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
-
-			j++;
-
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		j++;
+
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
+
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
+
+		found = true;
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
 
-			found = true;
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		list_del(&nlcth->list);
+		kfree(nlcth);
 	}
+
 	/* Make sure we return success if we flush and there is no helpers */
 	return (found || j == 0) ? 0 : -ENOENT;
 }
@@ -750,22 +741,16 @@ err_out:
 static void __exit nfnl_cthelper_exit(void)
 {
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
-	int i;
+	struct nfnl_cthelper *nlcth, *n;
 
 	nfnetlink_subsys_unregister(&nfnl_cthelper_subsys);
 
-	for (i=0; i<nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-									hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
+		kfree(nlcth);
 	}
 }
 

[PATCH 3.18 22/38] netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao Feng <fgao@ikuai8.com>


[ Upstream commit 75c689dca98851d65ef5a27e5ce26b625b68751c ]

In the commit 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp
helper"), the snmp_helper is replaced by nf_nat_snmp_hook. So the
snmp_helper is never registered. But it still tries to unregister the
snmp_helper, it could cause the panic.

Now remove the useless snmp_helper and the unregister call in the
error handler.

Fixes: 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp helper")
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/netfilter/nf_nat_snmp_basic.c |   19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -1260,16 +1260,6 @@ static const struct nf_conntrack_expect_
 	.timeout	= 180,
 };
 
-static struct nf_conntrack_helper snmp_helper __read_mostly = {
-	.me			= THIS_MODULE,
-	.help			= help,
-	.expect_policy		= &snmp_exp_policy,
-	.name			= "snmp",
-	.tuple.src.l3num	= AF_INET,
-	.tuple.src.u.udp.port	= cpu_to_be16(SNMP_PORT),
-	.tuple.dst.protonum	= IPPROTO_UDP,
-};
-
 static struct nf_conntrack_helper snmp_trap_helper __read_mostly = {
 	.me			= THIS_MODULE,
 	.help			= help,
@@ -1288,17 +1278,10 @@ static struct nf_conntrack_helper snmp_t
 
 static int __init nf_nat_snmp_basic_init(void)
 {
-	int ret = 0;
-
 	BUG_ON(nf_nat_snmp_hook != NULL);
 	RCU_INIT_POINTER(nf_nat_snmp_hook, help);
 
-	ret = nf_conntrack_helper_register(&snmp_trap_helper);
-	if (ret < 0) {
-		nf_conntrack_helper_unregister(&snmp_helper);
-		return ret;
-	}
-	return ret;
+	return nf_conntrack_helper_register(&snmp_trap_helper);
 }
 
 static void __exit nf_nat_snmp_basic_fini(void)

[PATCH 3.18 23/38] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Reizer, Eyal" <eyalr@ti.com>


[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/am335x-evmsk.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -645,6 +645,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 };

[PATCH 3.18 24/38] isdn: kcapi: avoid uninitialized data

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit af109a2cf6a9a6271fa420ae2d64d72d86c92b7d ]

gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/capi/kcapi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -1032,6 +1032,7 @@ static int old_capi_manufacturer(unsigne
 						     sizeof(avmb1_carddef))))
 				return -EFAULT;
 			cdef.cardtype = AVM_CARDTYPE_B1;
+			cdef.cardnr = 0;
 		} else {
 			if ((retval = copy_from_user(&cdef, data,
 						     sizeof(avmb1_extcarddef))))

[PATCH 3.18 25/38] xhci: plat: Register shutdown for xhci_plat

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Wallis <awallis@codeaurora.org>


[ Upstream commit b07c12517f2aed0add8ce18146bb426b14099392 ]

Shutdown should be called for xhci_plat devices especially for
situations where kexec might be used by stopping DMA
transactions.

Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -252,6 +252,7 @@ MODULE_DEVICE_TABLE(of, usb_xhci_of_matc
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,

[PATCH 3.18 26/38] ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>


[ Upstream commit 916a008b4b8ecc02fbd035cfb133773dba1ff3d7 ]

dma_get_sgtable() tries to create a scatterlist table containing valid
struct page pointers for the coherent memory allocation passed in to it.

However, memory can be declared via dma_declare_coherent_memory(), or
via other reservation schemes which means that coherent memory is not
guaranteed to be backed by struct pages.  In such cases, the resulting
scatterlist table contains pointers to invalid pages, which causes
kernel oops later.

This patch adds detection of such memory, and refuses to create a
scatterlist table for such memory.

Reported-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/dma-mapping.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -749,13 +749,31 @@ static void arm_coherent_dma_free(struct
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
 }
 
+/*
+ * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
+ * that the intention is to allow exporting memory allocated via the
+ * coherent DMA APIs through the dma_buf API, which only accepts a
+ * scattertable.  This presents a couple of problems:
+ * 1. Not all memory allocated via the coherent DMA APIs is backed by
+ *    a struct page
+ * 2. Passing coherent DMA memory into the streaming APIs is not allowed
+ *    as we will try to flush the memory through a different alias to that
+ *    actually being used (and the flushes are redundant.)
+ */
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
 		 struct dma_attrs *attrs)
 {
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+	unsigned long pfn = dma_to_pfn(dev, handle);
+	struct page *page;
 	int ret;
 
+	/* If the PFN is not valid, we do not have a struct page */
+	if (!pfn_valid(pfn))
+		return -ENXIO;
+
+	page = pfn_to_page(pfn);
+
 	ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
 	if (unlikely(ret))
 		return ret;

[PATCH 3.18 27/38] cpuidle: powernv: Pass correct drv->cpumask for registration

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>


[ Upstream commit 293d264f13cbde328d5477f49e3103edbc1dc191 ]

drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS.  When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.

This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.

Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:

cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
    pc: c00000000022c8bc: string+0x34/0x60
    lr: c00000000022ed78: vsnprintf+0x284/0x42c
    sp: c000000ff1503710
   msr: 9000000000009033
   dar: 6000000060000000
  current = 0xc000000ff1480000
  paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/8
Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
(Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
enter ? for help
[link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
[c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
[c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
[c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
[c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
[c000000ff15038c0] c000000000619694 printk+0x38/0x4c
[c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
[c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
[c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
[c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
[c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
[c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
[c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
[c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
[c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
[c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
[c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78

This patch fixes the bug by passing correct cpumask from
powernv-cpuidle driver.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpuidle/cpuidle-powernv.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -154,6 +154,24 @@ static int powernv_cpuidle_driver_init(v
 		drv->state_count += 1;
 	}
 
+	/*
+	 * On the PowerNV platform cpu_present may be less than cpu_possible in
+	 * cases when firmware detects the CPU, but it is not available to the
+	 * OS.  If CONFIG_HOTPLUG_CPU=n, then such CPUs are not hotplugable at
+	 * run time and hence cpu_devices are not created for those CPUs by the
+	 * generic topology_init().
+	 *
+	 * drv->cpumask defaults to cpu_possible_mask in
+	 * __cpuidle_driver_init().  This breaks cpuidle on PowerNV where
+	 * cpu_devices are not created for CPUs in cpu_possible_mask that
+	 * cannot be hot-added later at run time.
+	 *
+	 * Trying cpuidle_register_device() on a CPU without a cpu_device is
+	 * incorrect, so pass a correct CPU mask to the generic cpuidle driver.
+	 */
+
+	drv->cpumask = (struct cpumask *)cpu_present_mask;
+
 	return 0;
 }
 

[PATCH 3.18 28/38] backlight: pwm_bl: Fix overflow condition

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Derek Basehore <dbasehore@chromium.org>


[ Upstream commit 5d0c49acebc9488e37db95f1d4a55644e545ffe7 ]

This fixes an overflow condition that can happen with high max
brightness and period values in compute_duty_cycle. This fixes it by
using a 64 bit variable for computing the duty cycle.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/backlight/pwm_bl.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -78,14 +78,17 @@ static void pwm_backlight_power_off(stru
 static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
 {
 	unsigned int lth = pb->lth_brightness;
-	int duty_cycle;
+	u64 duty_cycle;
 
 	if (pb->levels)
 		duty_cycle = pb->levels[brightness];
 	else
 		duty_cycle = brightness;
 
-	return (duty_cycle * (pb->period - lth) / pb->scale) + lth;
+	duty_cycle *= pb->period - lth;
+	do_div(duty_cycle, pb->scale);
+
+	return duty_cycle + lth;
 }
 
 static int pwm_backlight_update_status(struct backlight_device *bl)

[PATCH 3.18 29/38] crypto: crypto4xx - increase context and scatter ring buffer elements

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@gmail.com>


[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]

If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.

On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)

/dev/mapper/swap_crypt:
 Timing buffered disk reads:  14 MB in  3.68 seconds =   3.81 MB/sec

The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:

/dev/mapper/swap_crypt:
 Timing buffered disk reads: 104 MB in  3.03 seconds =  34.31 MB/sec

Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/amcc/crypto4xx_core.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -32,12 +32,12 @@
 #define PPC405EX_CE_RESET                       0x00000008
 
 #define CRYPTO4XX_CRYPTO_PRIORITY		300
-#define PPC4XX_LAST_PD				63
-#define PPC4XX_NUM_PD				64
-#define PPC4XX_LAST_GD				1023
+#define PPC4XX_NUM_PD				256
+#define PPC4XX_LAST_PD				(PPC4XX_NUM_PD - 1)
 #define PPC4XX_NUM_GD				1024
-#define PPC4XX_LAST_SD				63
-#define PPC4XX_NUM_SD				64
+#define PPC4XX_LAST_GD				(PPC4XX_NUM_GD - 1)
+#define PPC4XX_NUM_SD				256
+#define PPC4XX_LAST_SD				(PPC4XX_NUM_SD - 1)
 #define PPC4XX_SD_BUFFER_SIZE			2048
 
 #define PD_ENTRY_INUSE				1

[PATCH 3.18 30/38] net: phy: at803x: Change error to EINVAL for invalid MAC

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Murphy <dmurphy@ti.com>


[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ]

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/at803x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -105,7 +105,7 @@ static int at803x_set_wol(struct phy_dev
 		mac = (const u8 *) ndev->dev_addr;
 
 		if (!is_valid_ether_addr(mac))
-			return -EFAULT;
+			return -EINVAL;
 
 		for (i = 0; i < 3; i++) {
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,

[PATCH 3.18 31/38] PCI: Avoid bus reset if bridge itself is broken

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Daney <david.daney@cavium.com>


[ Upstream commit 357027786f3523d26f42391aa4c075b8495e5d28 ]

When checking to see if a PCI bus can safely be reset, we previously
checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET
flag set.  Children marked with that flag are known not to behave well
after a bus reset.

Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.

Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device
to allow these bridges to be flagged, and prevent their secondary buses
from being reset.

Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3580,6 +3580,10 @@ static bool pci_bus_resetable(struct pci
 {
 	struct pci_dev *dev;
 
+
+	if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET))
+		return false;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
 		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))

[PATCH 3.18 32/38] scsi: cxgb4i: fix Tx skb leak

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Varun Prakash <varun@chelsio.com>


[ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ]

In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1262,6 +1262,7 @@ static void release_offload_resources(st
 		csk, csk->state, csk->flags, csk->tid);
 
 	cxgbi_sock_free_cpl_skbs(csk);
+	cxgbi_sock_purge_write_queue(csk);
 	if (csk->wr_cred != csk->wr_max_cred) {
 		cxgbi_sock_purge_wr_queue(csk);
 		cxgbi_sock_reset_wr_list(csk);

[PATCH 3.18 33/38] PCI: Create SR-IOV virtfn/physfn links before attaching driver

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stuart Hayes <stuart.w.hayes@gmail.com>


[ Upstream commit 27d6162944b9b34c32cd5841acd21786637ee743 ]

When creating virtual functions, create the "virtfn%u" and "physfn" links
in sysfs *before* attaching the driver instead of after.  When we attach
the driver to the new virtual network interface first, there is a race when
the driver attaches to the new sends out an "add" udev event, and the
network interface naming software (biosdevname or systemd, for example)
tries to look at these links.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/iov.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -106,7 +106,6 @@ static int virtfn_add(struct pci_dev *de
 	pci_device_add(virtfn, virtfn->bus);
 	mutex_unlock(&iov->dev->sriov->lock);
 
-	pci_bus_add_device(virtfn);
 	sprintf(buf, "virtfn%u", id);
 	rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
 	if (rc)
@@ -117,6 +116,8 @@ static int virtfn_add(struct pci_dev *de
 
 	kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
 
+	pci_bus_add_device(virtfn);
+
 	return 0;
 
 failed2:

[PATCH 3.18 34/38] igb: check memory allocation failure

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>


[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ]

Check memory allocation failures and return -ENOMEM in such cases, as
already done for other memory allocations in this function.

This avoids NULL pointers dereference.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com
Acked-by: PJ Waskiewicz <peter.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3001,6 +3001,8 @@ static int igb_sw_init(struct igb_adapte
 	/* Setup and initialize a copy of the hw vlan table array */
 	adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
 				       GFP_ATOMIC);
+	if (!adapter->shadow_vfta)
+		return -ENOMEM;
 
 	/* This call may decrease the number of queues */
 	if (igb_init_interrupt_scheme(adapter, true)) {

[PATCH 3.18 35/38] PCI/AER: Report non-fatal errors only to the affected endpoint

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabriele Paoloni <gabriele.paoloni@huawei.com>


[ Upstream commit 86acc790717fb60fb51ea3095084e331d8711c74 ]

Previously, if an non-fatal error was reported by an endpoint, we
called report_error_detected() for the endpoint, every sibling on the
bus, and their descendents.  If any of them did not implement the
.error_detected() method, do_recovery() failed, leaving all these
devices unrecovered.

For example, the system described in the bugzilla below has two devices:

  0000:74:02.0 [19e5:a230] SAS controller, driver has .error_detected()
  0000:74:03.0 [19e5:a235] SATA controller, driver lacks .error_detected()

When a device such as 74:02.0 reported a non-fatal error, do_recovery()
failed because 74:03.0 lacked an .error_detected() method.  But per PCIe
r3.1, sec 6.2.2.2.2, such an error does not compromise the Link and
does not affect 74:03.0:

  Non-fatal errors are uncorrectable errors which cause a particular
  transaction to be unreliable but the Link is otherwise fully functional.
  Isolating Non-fatal from Fatal errors provides Requester/Receiver logic
  in a device or system management software the opportunity to recover from
  the error without resetting the components on the Link and disturbing
  other transactions in progress.  Devices not associated with the
  transaction in error are not impacted by the error.

Report non-fatal errors only to the endpoint that reported them.  We really
want to check for AER_NONFATAL here, but the current code structure doesn't
allow that.  Looking for pci_channel_io_normal is the best we can do now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197055
Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver")
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pcie/aer/aerdrv_core.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -360,7 +360,14 @@ static pci_ers_result_t broadcast_error_
 		 * If the error is reported by an end point, we think this
 		 * error is related to the upstream link of the end point.
 		 */
-		pci_walk_bus(dev->bus, cb, &result_data);
+		if (state == pci_channel_io_normal)
+			/*
+			 * the error is non fatal so the bus is ok, just invoke
+			 * the callback for the function that logged the error.
+			 */
+			cb(dev, &result_data);
+		else
+			pci_walk_bus(dev->bus, cb, &result_data);
 	}
 
 	return result_data.result;

[PATCH 3.18 36/38] scsi: lpfc: Fix secure firmware updates

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ]

Firmware update fails with: status x17 add_status x56 on the final write

If multiple DMA buffers are used for the download, some firmware revs
have difficulty with signatures and crcs split across the dma buffer
boundaries.  Resolve by making all writes be a single 4k page in length.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hw4.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -2951,7 +2951,7 @@ struct lpfc_mbx_get_port_name {
 #define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
 #define MB_CQE_STATUS_DMA_FAILED		0x5
 
-#define LPFC_MBX_WR_CONFIG_MAX_BDE		8
+#define LPFC_MBX_WR_CONFIG_MAX_BDE		1
 struct lpfc_mbx_wr_object {
 	struct mbox_header header;
 	union {

[PATCH 3.18 37/38] scsi: lpfc: PLOGI failures during NPIV testing

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ]

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4737,7 +4737,8 @@ lpfc_nlp_remove(struct lpfc_vport *vport
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
 	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
 	    !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
-	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
+	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED) &&
+	    phba->sli_rev != LPFC_SLI_REV4) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */

[PATCH 3.18 38/38] fm10k: ensure we process SM mbx when processing VF mbx

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Keller <jacob.e.keller@intel.com>


[ Upstream commit 17a91809942ca32c70026d2d5ba3348a2c4fdf8f ]

When we process VF mailboxes, the driver is likely going to also queue
up messages to the switch manager. This process merely queues up the
FIFO, but doesn't actually begin the transmission process. Because we
hold the mailbox lock during this VF processing, the PF<->SM mailbox is
not getting processed at this time. Ensure that we actually process the
PF<->SM mailbox in between each PF<->VF mailbox.

This should ensure prompt transmission of the messages queued up after
each VF message is received and handled.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -145,6 +145,9 @@ process_mbx:
 		struct fm10k_mbx_info *mbx = &vf_info->mbx;
 		u16 glort = vf_info->glort;
 
+		/* process the SM mailbox first to drain outgoing messages */
+		hw->mbx.ops.process(hw, &hw->mbx);
+
 		/* verify port mapping is valid, if not reset port */
 		if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort))
 			hw->iov.ops.reset_lport(hw, vf_info);

Re: [PATCH 3.18 00/38] 3.18.90-stable review

[Guenter Roeck]

On Fri, Dec 22, 2017 at 09:46:13AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.90 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:44:40 UTC 2017.
> Anything received after that time might be too late.
> 
Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 112 pass: 112 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.18 00/38] 3.18.90-stable review

[Shuah Khan]

On 12/22/2017 01:46 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.90 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:44:40 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.90-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 3.18 00/38] 3.18.90-stable review

[Greg Kroah-Hartman]

On Fri, Dec 22, 2017 at 09:53:59AM -0800, Guenter Roeck wrote:
> On Fri, Dec 22, 2017 at 09:46:13AM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.90 release.
> > There are 38 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Dec 24 08:44:40 UTC 2017.
> > Anything received after that time might be too late.
> > 
> Build results:
> 	total: 136 pass: 136 fail: 0
> Qemu test results:
> 	total: 112 pass: 112 fail: 0
> 
> Details are available at http://server.roeck-us.net:8010/builders.

Yeah, at least one worked!

greg k-h