[PATCH 4.4 00/78] 4.4.108-stable review

[PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.108 release.
There are 78 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.108-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.108-rc1

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix yet another i915 pointer leftover in error path

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Degrade i915 binding failure message

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

Aleksandar Markovic <aleksandar.markovic@mips.com>
    MIPS: math-emu: Fix final emulation phase for certain instructions

Arvind Yadav <arvind.yadav.cs@gmail.com>
    thermal: hisilicon: Handle return value of clk_prepare_enable

Nicholas Piggin <npiggin@gmail.com>
    cpuidle: fix broadcast control when broadcast can not be entered

Alexandre Belloni <alexandre.belloni@free-electrons.com>
    rtc: set the alarm to the next expiring timer

Hoang Tran <tranviethoang.vn@gmail.com>
    tcp: fix under-evaluated ssthresh in TCP Vegas

Jacob Keller <jacob.e.keller@intel.com>
    fm10k: ensure we process SM mbx when processing VF mbx

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: PLOGI failures during NPIV testing

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: Fix secure firmware updates

Gabriele Paoloni <gabriele.paoloni@huawei.com>
    PCI/AER: Report non-fatal errors only to the affected endpoint

Emil Tantilov <emil.s.tantilov@intel.com>
    ixgbe: fix use of uninitialized padding

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    igb: check memory allocation failure

Stuart Hayes <stuart.w.hayes@gmail.com>
    PCI: Create SR-IOV virtfn/physfn links before attaching driver

Sreekanth Reddy <sreekanth.reddy@broadcom.com>
    scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive

Varun Prakash <varun@chelsio.com>
    scsi: cxgb4i: fix Tx skb leak

David Daney <david.daney@cavium.com>
    PCI: Avoid bus reset if bridge itself is broken

Dan Murphy <dmurphy@ti.com>
    net: phy: at803x: Change error to EINVAL for invalid MAC

Russell King <rmk+kernel@armlinux.org.uk>
    rtc: pl031: make interrupt optional

Christian Lamparter <chunkeey@gmail.com>
    crypto: crypto4xx - increase context and scatter ring buffer elements

Derek Basehore <dbasehore@chromium.org>
    backlight: pwm_bl: Fix overflow condition

Sankar Patchineelam <sankar.patchineelam@broadcom.com>
    bnxt_en: Fix NULL pointer dereference in reopen failure path

Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
    cpuidle: powernv: Pass correct drv->cpumask for registration

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

Liping Zhang <zlpnobody@gmail.com>
    netfilter: nfnetlink_queue: fix secctx memory leak

Adam Wallis <awallis@codeaurora.org>
    xhci: plat: Register shutdown for xhci_plat

Arnd Bergmann <arnd@arndb.de>
    isdn: kcapi: avoid uninitialized data

Herongguang (Stephen) <herongguang.he@huawei.com>
    KVM: pci-assign: do not map smm memory slot pages in vt-d page tables

Reizer, Eyal <eyalr@ti.com>
    ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

Gao Feng <fgao@ikuai8.com>
    netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register

Liping Zhang <zlpnobody@gmail.com>
    netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table

Alexey Khoroshilov <khoroshilov@ispras.ru>
    irda: vlsi_ir: fix check for DMA mapping errors

Sagi Grimberg <sagi@grimberg.me>
    RDMA/iser: Fix possible mr leak on device removal event

Alexander Duyck <alexander.h.duyck@intel.com>
    i40e: Do not enable NAPI on q_vectors that have no rings

Alexander Duyck <alexander.h.duyck@intel.com>
    net: Do not allow negative values for busy_read and busy_poll sysctl interfaces

Arnd Bergmann <arnd@arndb.de>
    bna: avoid writing uninitialized data into hw registers

Julian Wiedmann <jwi@linux.vnet.ibm.com>
    s390/qeth: no ETH header for outbound AF_IUCV

hayeswang <hayeswang@realtek.com>
    r8152: prevent the driver from transmitting packets with carrier off

Peter Stein <peter@stuntstein.dk>
    HID: xinmo: fix for out of range for THT 2P arcade controller.

Mike Looijmans <mike.looijmans@topic.nl>
    i2c: mux: pca954x: Add missing pca9546 definition to chip_desc

Arnd Bergmann <arnd@arndb.de>
    hwmon: (asus_atk0110) fix uninitialized data access

Rob Herring <robh@kernel.org>
    ARM: dts: ti: fix PCI bus dtc warnings

Wanpeng Li <wanpeng.li@hotmail.com>
    KVM: VMX: Fix enable VPID conditions

Wanpeng Li <wanpeng.li@hotmail.com>
    KVM: x86: correct async page present tracepoint

Dick Kennedy <dick.kennedy@broadcom.com>
    scsi: lpfc: Fix PT2PT PRLI reject

Patrice Chotard <patrice.chotard@st.com>
    pinctrl: st: add irq_request/release_resources callbacks

Eric Dumazet <edumazet@google.com>
    inet: frag: release spinlock before calling icmp_send()

Jeffy Chen <jeffy.chen@rock-chips.com>
    netfilter: nfnl_cthelper: Fix memory leak

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nfnl_cthelper: fix runtime expectation policy updates

Gustavo A. R. Silva <garsilva@embeddedor.com>
    usb: gadget: udc: remove pointer dereference after free

Roger Quadros <rogerq@ti.com>
    usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

Tony Lindgren <tony@atomide.com>
    net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4

Dan Carpenter <dan.carpenter@oracle.com>
    bna: integer overflow bug in debugfs

Eric Dumazet <edumazet@google.com>
    sch_dsmark: fix invalid skb_cow() usage

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

hayeswang <hayeswang@realtek.com>
    r8152: fix the list rx_done may be used without initialization

Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
    cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

Jon Medhurst <tixy@linaro.org>
    arm: kprobes: Align stack to 8-bytes in test code

Masami Hiramatsu <mhiramat@kernel.org>
    arm: kprobes: Fix the return address of multiple kretprobes

Jaroslav Kysela <perex@perex.cz>
    ALSA: hda - add support for docking station for HP 840 G3

Jaroslav Kysela <perex@perex.cz>
    ALSA: hda - add support for docking station for HP 820 G2

Aaron Lu <aaron.lu@intel.com>
    x86/irq: Do not substract irq_tlb_count from irq_call_count

Andy Lutomirski <luto@kernel.org>
    sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()

Steven Rostedt <rostedt@goodmis.org>
    ARM: Hide finish_arch_post_lock_switch() from modules

Andy Lutomirski <luto@kernel.org>
    x86/mm, sched/core: Turn off IRQs in switch_mm()

Andy Lutomirski <luto@kernel.org>
    x86/mm, sched/core: Uninline switch_mm()

Andy Lutomirski <luto@kernel.org>
    x86/mm: Build arch/x86/mm/tlb.c even on !SMP

Andy Lutomirski <luto@kernel.org>
    sched/core: Add switch_mm_irqs_off() and use it in the scheduler

Ingo Molnar <mingo@kernel.org>
    mm/mmu_context, sched/core: Fix mmu_context.h assumption

Nadav Amit <namit@vmware.com>
    mm/rmap: batched invalidations should use existing api

Andy Lutomirski <luto@kernel.org>
    x86/mm: If INVPCID is available, use it to flush global mappings

Andy Lutomirski <luto@kernel.org>
    x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID

Borislav Petkov <bp@suse.de>
    x86/mm: Fix INVPCID asm constraint

Andy Lutomirski <luto@kernel.org>
    x86/mm: Add INVPCID helpers

Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
    cxl: Check if vphb exists before iterating over AFU devices

Steve Capper <steve.capper@arm.com>
    arm64: Initialise high_memory global variable earlier


-------------

Diffstat:

 Documentation/kernel-parameters.txt             |   2 +
 Makefile                                        |   4 +-
 arch/arm/boot/dts/am335x-evmsk.dts              |   1 +
 arch/arm/boot/dts/dra7.dtsi                     |   2 +
 arch/arm/include/asm/mmu_context.h              |   2 +
 arch/arm/mm/dma-mapping.c                       |  20 +-
 arch/arm/probes/kprobes/core.c                  |  24 ++-
 arch/arm/probes/kprobes/test-core.c             |  11 +-
 arch/arm64/mm/init.c                            |   2 +-
 arch/mips/math-emu/cp1emu.c                     |  28 +--
 arch/x86/include/asm/hardirq.h                  |   4 -
 arch/x86/include/asm/mmu_context.h              | 101 +--------
 arch/x86/include/asm/tlbflush.h                 |  63 +++++-
 arch/x86/kernel/cpu/common.c                    |  16 ++
 arch/x86/kernel/irq.c                           |   3 +-
 arch/x86/kvm/vmx.c                              |   9 +-
 arch/x86/kvm/x86.c                              |   2 +-
 arch/x86/mm/Makefile                            |   3 +-
 arch/x86/mm/tlb.c                               | 118 ++++++++++-
 drivers/bluetooth/btusb.c                       |   5 -
 drivers/cpuidle/cpuidle-powernv.c               |  18 ++
 drivers/cpuidle/cpuidle.c                       |   1 +
 drivers/cpuidle/sysfs.c                         |  12 ++
 drivers/crypto/amcc/crypto4xx_core.h            |  10 +-
 drivers/hid/hid-core.c                          |   1 +
 drivers/hid/hid-ids.h                           |   1 +
 drivers/hid/hid-xinmo.c                         |   1 +
 drivers/hwmon/asus_atk0110.c                    |   3 +
 drivers/i2c/muxes/i2c-mux-pca954x.c             |   6 +-
 drivers/infiniband/ulp/iser/iscsi_iser.h        |   2 +
 drivers/infiniband/ulp/iser/iser_verbs.c        |   8 +-
 drivers/isdn/capi/kcapi.c                       |   1 +
 drivers/misc/cxl/pci.c                          |  13 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt.c       |  13 ++
 drivers/net/ethernet/brocade/bna/bfa_ioc.c      |  10 +-
 drivers/net/ethernet/brocade/bna/bnad_debugfs.c |   2 +-
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c    |   3 +
 drivers/net/ethernet/intel/i40e/i40e_main.c     |  16 +-
 drivers/net/ethernet/intel/igb/igb_main.c       |   2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |   4 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c   |   2 +
 drivers/net/irda/vlsi_ir.c                      |   8 +-
 drivers/net/phy/at803x.c                        |   2 +-
 drivers/net/usb/qmi_wwan.c                      |   4 +
 drivers/net/usb/r8152.c                         |  19 +-
 drivers/pci/iov.c                               |   3 +-
 drivers/pci/pci.c                               |   4 +
 drivers/pci/pcie/aer/aerdrv_core.c              |   9 +-
 drivers/pinctrl/pinctrl-st.c                    |  30 ++-
 drivers/rtc/interface.c                         |   2 +-
 drivers/rtc/rtc-pl031.c                         |  14 +-
 drivers/s390/net/qeth_l3_main.c                 |  15 +-
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c              |   1 +
 drivers/scsi/lpfc/lpfc_els.c                    |   3 +-
 drivers/scsi/lpfc/lpfc_hbadisc.c                |   3 +-
 drivers/scsi/lpfc/lpfc_hw4.h                    |   2 +-
 drivers/scsi/mpt3sas/mpt3sas_scsih.c            |   5 +
 drivers/thermal/hisi_thermal.c                  |   5 +-
 drivers/usb/gadget/function/f_uvc.c             |   8 +
 drivers/usb/gadget/udc/pch_udc.c                |   1 -
 drivers/usb/host/xhci-plat.c                    |   1 +
 drivers/video/backlight/pwm_bl.c                |   7 +-
 include/linux/mmu_context.h                     |   7 +
 kernel/sched/core.c                             |   4 +-
 mm/mmu_context.c                                |   2 +-
 mm/rmap.c                                       |  28 +--
 net/core/sysctl_net_core.c                      |   6 +-
 net/ipv4/ip_fragment.c                          |  25 ++-
 net/ipv4/netfilter/nf_nat_snmp_basic.c          |  19 +-
 net/ipv4/tcp_vegas.c                            |   2 +-
 net/netfilter/nfnetlink_cthelper.c              | 267 +++++++++++++++---------
 net/netfilter/nfnetlink_queue.c                 |   9 +-
 net/netlink/af_netlink.c                        |  41 ++++
 net/sched/sch_dsmark.c                          |  10 +-
 sound/hda/hdac_i915.c                           |   4 +-
 sound/pci/hda/hda_intel.c                       |   6 +-
 sound/pci/hda/patch_conexant.c                  |  11 +
 sound/pci/hda/patch_realtek.c                   |  14 +-
 virt/kvm/kvm_main.c                             |   2 +-
 79 files changed, 793 insertions(+), 359 deletions(-)

[PATCH 4.4 01/78] arm64: Initialise high_memory global variable earlier

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Capper <steve.capper@arm.com>

commit f24e5834a2c3f6c5f814a417f858226f0a010ade upstream.

The high_memory global variable is used by
cma_declare_contiguous(.) before it is defined.

We don't notice this as we compute __pa(high_memory - 1), and it looks
like we're processing a VA from the direct linear map.

This problem becomes apparent when we flip the kernel virtual address
space and the linear map is moved to the bottom of the kernel VA space.

This patch moves the initialisation of high_memory before it used.

Fixes: f7426b983a6a ("mm: cma: adjust address limit to avoid hitting low/high memory boundary")
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -178,6 +178,7 @@ void __init arm64_memblock_init(void)
 		arm64_dma_phys_limit = max_zone_dma_phys();
 	else
 		arm64_dma_phys_limit = PHYS_MASK + 1;
+	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 	dma_contiguous_reserve(arm64_dma_phys_limit);
 
 	memblock_allow_resize();
@@ -202,7 +203,6 @@ void __init bootmem_init(void)
 	sparse_init();
 	zone_sizes_init(min, max);
 
-	high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
 	max_pfn = max_low_pfn = max;
 }
 

[PATCH 4.4 02/78] cxl: Check if vphb exists before iterating over AFU devices

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>

commit 12841f87b7a8ceb3d54f171660f72a86941bfcb3 upstream.

During an eeh a kernel-oops is reported if no vPHB is allocated to the
AFU. This happens as during AFU init, an error in creation of vPHB is
a non-fatal error. Hence afu->phb should always be checked for NULL
before iterating over it for the virtual AFU pci devices.

This patch fixes the kenel-oops by adding a NULL pointer check for
afu->phb before it is dereferenced.

Fixes: 9e8df8a21963 ("cxl: EEH support")
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/cxl/pci.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -1329,6 +1329,9 @@ static pci_ers_result_t cxl_vphb_error_d
 	/* There should only be one entry, but go through the list
 	 * anyway
 	 */
+	if (afu->phb == NULL)
+		return result;
+
 	list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
 		if (!afu_dev->driver)
 			continue;
@@ -1369,6 +1372,10 @@ static pci_ers_result_t cxl_pci_error_de
 		 */
 		for (i = 0; i < adapter->slices; i++) {
 			afu = adapter->afu[i];
+			/*
+			 * Tell the AFU drivers; but we don't care what they
+			 * say, we're going away.
+			 */
 			cxl_vphb_error_detected(afu, state);
 		}
 		return PCI_ERS_RESULT_DISCONNECT;
@@ -1492,6 +1499,9 @@ static pci_ers_result_t cxl_pci_slot_res
 		if (cxl_afu_select_best_mode(afu))
 			goto err;
 
+		if (afu->phb == NULL)
+			continue;
+
 		cxl_pci_vphb_reconfigure(afu);
 
 		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
@@ -1556,6 +1566,9 @@ static void cxl_pci_resume(struct pci_de
 	for (i = 0; i < adapter->slices; i++) {
 		afu = adapter->afu[i];
 
+		if (afu->phb == NULL)
+			continue;
+
 		list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
 			if (afu_dev->driver && afu_dev->driver->err_handler &&
 			    afu_dev->driver->err_handler->resume)

[PATCH 4.4 03/78] x86/mm: Add INVPCID helpers

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 060a402a1ddb551455ee410de2eadd3349f2801b upstream.

This adds helpers for each of the four currently-specified INVPCID
modes.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/8a62b23ad686888cee01da134c91409e22064db9.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/tlbflush.h |   48 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -7,6 +7,54 @@
 #include <asm/processor.h>
 #include <asm/special_insns.h>
 
+static inline void __invpcid(unsigned long pcid, unsigned long addr,
+			     unsigned long type)
+{
+	u64 desc[2] = { pcid, addr };
+
+	/*
+	 * The memory clobber is because the whole point is to invalidate
+	 * stale TLB entries and, especially if we're flushing global
+	 * mappings, we don't want the compiler to reorder any subsequent
+	 * memory accesses before the TLB flush.
+	 *
+	 * The hex opcode is invpcid (%ecx), %eax in 32-bit mode and
+	 * invpcid (%rcx), %rax in long mode.
+	 */
+	asm volatile (".byte 0x66, 0x0f, 0x38, 0x82, 0x01"
+		      : : "m" (desc), "a" (type), "c" (desc) : "memory");
+}
+
+#define INVPCID_TYPE_INDIV_ADDR		0
+#define INVPCID_TYPE_SINGLE_CTXT	1
+#define INVPCID_TYPE_ALL_INCL_GLOBAL	2
+#define INVPCID_TYPE_ALL_NON_GLOBAL	3
+
+/* Flush all mappings for a given pcid and addr, not including globals. */
+static inline void invpcid_flush_one(unsigned long pcid,
+				     unsigned long addr)
+{
+	__invpcid(pcid, addr, INVPCID_TYPE_INDIV_ADDR);
+}
+
+/* Flush all mappings for a given PCID, not including globals. */
+static inline void invpcid_flush_single_context(unsigned long pcid)
+{
+	__invpcid(pcid, 0, INVPCID_TYPE_SINGLE_CTXT);
+}
+
+/* Flush all mappings, including globals, for all PCIDs. */
+static inline void invpcid_flush_all(void)
+{
+	__invpcid(0, 0, INVPCID_TYPE_ALL_INCL_GLOBAL);
+}
+
+/* Flush all mappings for all PCIDs except globals. */
+static inline void invpcid_flush_all_nonglobals(void)
+{
+	__invpcid(0, 0, INVPCID_TYPE_ALL_NON_GLOBAL);
+}
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else

[PATCH 4.4 05/78] x86/mm: Add a noinvpcid boot option to turn off INVPCID

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit d12a72b844a49d4162f24cefdab30bed3f86730e upstream.

This adds a chicken bit to turn off INVPCID in case something goes
wrong.  It's an early_param() because we do TLB flushes before we
parse __setup() parameters.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/f586317ed1bc2b87aee652267e515b90051af385.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/kernel-parameters.txt |    2 ++
 arch/x86/kernel/cpu/common.c        |   16 ++++++++++++++++
 2 files changed, 18 insertions(+)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2519,6 +2519,8 @@ bytes respectively. Such letter suffixes
 
 	nointroute	[IA-64]
 
+	noinvpcid	[X86] Disable the INVPCID cpu feature.
+
 	nojitter	[IA-64] Disables jitter checking for ITC timers.
 
 	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -162,6 +162,22 @@ static int __init x86_mpx_setup(char *s)
 }
 __setup("nompx", x86_mpx_setup);
 
+static int __init x86_noinvpcid_setup(char *s)
+{
+	/* noinvpcid doesn't accept parameters */
+	if (s)
+		return -EINVAL;
+
+	/* do not emit a message if the feature is not present */
+	if (!boot_cpu_has(X86_FEATURE_INVPCID))
+		return 0;
+
+	setup_clear_cpu_cap(X86_FEATURE_INVPCID);
+	pr_info("noinvpcid: INVPCID feature disabled\n");
+	return 0;
+}
+early_param("noinvpcid", x86_noinvpcid_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override = -1;
 static int disable_x86_serial_nr = 1;

[PATCH 4.4 06/78] x86/mm: If INVPCID is available, use it to flush global mappings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit d8bced79af1db6734f66b42064cc773cada2ce99 upstream.

On my Skylake laptop, INVPCID function 2 (flush absolutely
everything) takes about 376ns, whereas saving flags, twiddling
CR4.PGE to flush global mappings, and restoring flags takes about
539ns.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/ed0ef62581c0ea9c99b9bf6df726015e96d44743.1454096309.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/tlbflush.h |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -159,6 +159,15 @@ static inline void __native_flush_tlb_gl
 {
 	unsigned long flags;
 
+	if (static_cpu_has(X86_FEATURE_INVPCID)) {
+		/*
+		 * Using INVPCID is considerably faster than a pair of writes
+		 * to CR4 sandwiched inside an IRQ flag save/restore.
+		 */
+		invpcid_flush_all();
+		return;
+	}
+
 	/*
 	 * Read-modify-write to CR4 - protect it from preemption and
 	 * from interrupts. (Use the raw variant because this code can

[PATCH 4.4 07/78] mm/rmap: batched invalidations should use existing api

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit 858eaaa711700ce4595e039441e239e56d7b9514 upstream.

The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown.  However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.

This patch reuses the existing TLB flushing mechnaisms instead.  We use
NULL as mm to indicate a global invalidation is required.

Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/tlbflush.h |    6 ------
 arch/x86/mm/tlb.c               |    2 +-
 mm/rmap.c                       |   28 +++++++---------------------
 3 files changed, 8 insertions(+), 28 deletions(-)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -325,12 +325,6 @@ static inline void reset_lazy_tlbstate(v
 
 #endif	/* SMP */
 
-/* Not inlined due to inc_irq_stat not being defined yet */
-#define flush_tlb_local() {		\
-	inc_irq_stat(irq_tlb_count);	\
-	local_flush_tlb();		\
-}
-
 #ifndef CONFIG_PARAVIRT
 #define flush_tlb_others(mask, mm, start, end)	\
 	native_flush_tlb_others(mask, mm, start, end)
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -104,7 +104,7 @@ static void flush_tlb_func(void *info)
 
 	inc_irq_stat(irq_tlb_count);
 
-	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
+	if (f->flush_mm && f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -587,19 +587,6 @@ vma_address(struct page *page, struct vm
 }
 
 #ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
-static void percpu_flush_tlb_batch_pages(void *data)
-{
-	/*
-	 * All TLB entries are flushed on the assumption that it is
-	 * cheaper to flush all TLBs and let them be refilled than
-	 * flushing individual PFNs. Note that we do not track mm's
-	 * to flush as that might simply be multiple full TLB flushes
-	 * for no gain.
-	 */
-	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
-	flush_tlb_local();
-}
-
 /*
  * Flush TLB entries for recently unmapped pages from remote CPUs. It is
  * important if a PTE was dirty when it was unmapped that it's flushed
@@ -616,15 +603,14 @@ void try_to_unmap_flush(void)
 
 	cpu = get_cpu();
 
-	trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, -1UL);
-
-	if (cpumask_test_cpu(cpu, &tlb_ubc->cpumask))
-		percpu_flush_tlb_batch_pages(&tlb_ubc->cpumask);
-
-	if (cpumask_any_but(&tlb_ubc->cpumask, cpu) < nr_cpu_ids) {
-		smp_call_function_many(&tlb_ubc->cpumask,
-			percpu_flush_tlb_batch_pages, (void *)tlb_ubc, true);
+	if (cpumask_test_cpu(cpu, &tlb_ubc->cpumask)) {
+		count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+		local_flush_tlb();
+		trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
 	}
+
+	if (cpumask_any_but(&tlb_ubc->cpumask, cpu) < nr_cpu_ids)
+		flush_tlb_others(&tlb_ubc->cpumask, NULL, 0, TLB_FLUSH_ALL);
 	cpumask_clear(&tlb_ubc->cpumask);
 	tlb_ubc->flush_required = false;
 	tlb_ubc->writable = false;

[PATCH 4.4 08/78] mm/mmu_context, sched/core: Fix mmu_context.h assumption

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ingo Molnar <mingo@kernel.org>

commit 8efd755ac2fe262d4c8d5c9bbe054bb67dae93da upstream.

Some architectures (such as Alpha) rely on include/linux/sched.h definitions
in their mmu_context.h files.

So include sched.h before mmu_context.h.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mmu_context.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/mmu_context.c
+++ b/mm/mmu_context.c
@@ -4,9 +4,9 @@
  */
 
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/mmu_context.h>
 #include <linux/export.h>
-#include <linux/sched.h>
 
 #include <asm/mmu_context.h>
 

[PATCH 4.4 09/78] sched/core: Add switch_mm_irqs_off() and use it in the scheduler

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit f98db6013c557c216da5038d9c52045be55cd039 upstream.

By default, this is the same thing as switch_mm().

x86 will override it as an optimization.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/df401df47bdd6be3e389c6f1e3f5310d70e81b2c.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mmu_context.h |    7 +++++++
 kernel/sched/core.c         |    6 +++---
 2 files changed, 10 insertions(+), 3 deletions(-)

--- a/include/linux/mmu_context.h
+++ b/include/linux/mmu_context.h
@@ -1,9 +1,16 @@
 #ifndef _LINUX_MMU_CONTEXT_H
 #define _LINUX_MMU_CONTEXT_H
 
+#include <asm/mmu_context.h>
+
 struct mm_struct;
 
 void use_mm(struct mm_struct *mm);
 void unuse_mm(struct mm_struct *mm);
 
+/* Architectures that care about IRQ state in switch_mm can override this. */
+#ifndef switch_mm_irqs_off
+# define switch_mm_irqs_off switch_mm
+#endif
+
 #endif
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -32,7 +32,7 @@
 #include <linux/init.h>
 #include <linux/uaccess.h>
 #include <linux/highmem.h>
-#include <asm/mmu_context.h>
+#include <linux/mmu_context.h>
 #include <linux/interrupt.h>
 #include <linux/capability.h>
 #include <linux/completion.h>
@@ -2708,7 +2708,7 @@ context_switch(struct rq *rq, struct tas
 		atomic_inc(&oldmm->mm_count);
 		enter_lazy_tlb(oldmm, next);
 	} else
-		switch_mm(oldmm, mm, next);
+		switch_mm_irqs_off(oldmm, mm, next);
 
 	if (!prev->mm) {
 		prev->active_mm = NULL;
@@ -5206,7 +5206,7 @@ void idle_task_exit(void)
 	BUG_ON(cpu_online(smp_processor_id()));
 
 	if (mm != &init_mm) {
-		switch_mm(mm, &init_mm, current);
+		switch_mm_irqs_off(mm, &init_mm, current);
 		finish_arch_post_lock_switch();
 	}
 	mmdrop(mm);

[PATCH 4.4 10/78] x86/mm: Build arch/x86/mm/tlb.c even on !SMP

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit e1074888c326038340a1ada9129d679e661f2ea6 upstream.

Currently all of the functions that live in tlb.c are inlined on
!SMP builds.  One can debate whether this is a good idea (in many
respects the code in tlb.c is better than the inlined UP code).

Regardless, I want to add code that needs to be built on UP and SMP
kernels and relates to tlb flushing, so arrange for tlb.c to be
compiled unconditionally.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f0d778f0d828fc46e5d1946bca80f0aaf9abf032.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/x86/mm/Makefile |    3 +--
 arch/x86/mm/tlb.c    |    4 ++++
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,5 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
+	    pat.o pgtable.o physaddr.o gup.o setup_nx.o tlb.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
@@ -9,7 +9,6 @@ CFLAGS_setup_nx.o		:= $(nostackp)
 CFLAGS_fault.o := -I$(src)/../include/asm/trace
 
 obj-$(CONFIG_X86_PAT)		+= pat_rbtree.o
-obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -28,6 +28,8 @@
  *	Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
  */
 
+#ifdef CONFIG_SMP
+
 struct flush_tlb_info {
 	struct mm_struct *flush_mm;
 	unsigned long flush_start;
@@ -351,3 +353,5 @@ static int __init create_tlb_single_page
 	return 0;
 }
 late_initcall(create_tlb_single_page_flush_ceiling);
+
+#endif /* CONFIG_SMP */

[PATCH 4.4 11/78] x86/mm, sched/core: Uninline switch_mm()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 69c0319aabba45bcf33178916a2f06967b4adede upstream.

It's fairly large and it has quite a few callers.  This may also
help untangle some headers down the road.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/54f3367803e7f80b2be62c8a21879aa74b1a5f57.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/mmu_context.h |   98 -----------------------------------
 arch/x86/mm/tlb.c                  |  102 +++++++++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+), 96 deletions(-)

--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -104,103 +104,9 @@ static inline void enter_lazy_tlb(struct
 #endif
 }
 
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned cpu = smp_processor_id();
+extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+		      struct task_struct *tsk);
 
-	if (likely(prev != next)) {
-#ifdef CONFIG_SMP
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		this_cpu_write(cpu_tlbstate.active_mm, next);
-#endif
-		cpumask_set_cpu(cpu, mm_cpumask(next));
-
-		/*
-		 * Re-load page tables.
-		 *
-		 * This logic has an ordering constraint:
-		 *
-		 *  CPU 0: Write to a PTE for 'next'
-		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
-		 *  CPU 1: set bit 1 in next's mm_cpumask
-		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
-		 *
-		 * We need to prevent an outcome in which CPU 1 observes
-		 * the new PTE value and CPU 0 observes bit 1 clear in
-		 * mm_cpumask.  (If that occurs, then the IPI will never
-		 * be sent, and CPU 0's TLB will contain a stale entry.)
-		 *
-		 * The bad outcome can occur if either CPU's load is
-		 * reordered before that CPU's store, so both CPUs must
-		 * execute full barriers to prevent this from happening.
-		 *
-		 * Thus, switch_mm needs a full barrier between the
-		 * store to mm_cpumask and any operation that could load
-		 * from next->pgd.  TLB fills are special and can happen
-		 * due to instruction fetches or for no reason at all,
-		 * and neither LOCK nor MFENCE orders them.
-		 * Fortunately, load_cr3() is serializing and gives the
-		 * ordering guarantee we need.
-		 *
-		 */
-		load_cr3(next->pgd);
-
-		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-
-		/* Stop flush ipis for the previous mm */
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
-
-		/* Load per-mm CR4 state */
-		load_mm_cr4(next);
-
-#ifdef CONFIG_MODIFY_LDT_SYSCALL
-		/*
-		 * Load the LDT, if the LDT is different.
-		 *
-		 * It's possible that prev->context.ldt doesn't match
-		 * the LDT register.  This can happen if leave_mm(prev)
-		 * was called and then modify_ldt changed
-		 * prev->context.ldt but suppressed an IPI to this CPU.
-		 * In this case, prev->context.ldt != NULL, because we
-		 * never set context.ldt to NULL while the mm still
-		 * exists.  That means that next->context.ldt !=
-		 * prev->context.ldt, because mms never share an LDT.
-		 */
-		if (unlikely(prev->context.ldt != next->context.ldt))
-			load_mm_ldt(next);
-#endif
-	}
-#ifdef CONFIG_SMP
-	  else {
-		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
-		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
-
-		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
-			/*
-			 * On established mms, the mm_cpumask is only changed
-			 * from irq context, from ptep_clear_flush() while in
-			 * lazy tlb mode, and here. Irqs are blocked during
-			 * schedule, protecting us from simultaneous changes.
-			 */
-			cpumask_set_cpu(cpu, mm_cpumask(next));
-
-			/*
-			 * We were in lazy tlb mode and leave_mm disabled
-			 * tlb flush IPI delivery. We must reload CR3
-			 * to make sure to use no freed page tables.
-			 *
-			 * As above, load_cr3() is serializing and orders TLB
-			 * fills with respect to the mm_cpumask write.
-			 */
-			load_cr3(next->pgd);
-			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
-			load_mm_cr4(next);
-			load_mm_ldt(next);
-		}
-	}
-#endif
-}
 
 #define activate_mm(prev, next)			\
 do {						\
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -59,6 +59,108 @@ void leave_mm(int cpu)
 }
 EXPORT_SYMBOL_GPL(leave_mm);
 
+#endif /* CONFIG_SMP */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	       struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+#ifdef CONFIG_SMP
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		this_cpu_write(cpu_tlbstate.active_mm, next);
+#endif
+		cpumask_set_cpu(cpu, mm_cpumask(next));
+
+		/*
+		 * Re-load page tables.
+		 *
+		 * This logic has an ordering constraint:
+		 *
+		 *  CPU 0: Write to a PTE for 'next'
+		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
+		 *  CPU 1: set bit 1 in next's mm_cpumask
+		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
+		 *
+		 * We need to prevent an outcome in which CPU 1 observes
+		 * the new PTE value and CPU 0 observes bit 1 clear in
+		 * mm_cpumask.  (If that occurs, then the IPI will never
+		 * be sent, and CPU 0's TLB will contain a stale entry.)
+		 *
+		 * The bad outcome can occur if either CPU's load is
+		 * reordered before that CPU's store, so both CPUs must
+		 * execute full barriers to prevent this from happening.
+		 *
+		 * Thus, switch_mm needs a full barrier between the
+		 * store to mm_cpumask and any operation that could load
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
+		 *
+		 */
+		load_cr3(next->pgd);
+
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+
+		/* Stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
+		/* Load per-mm CR4 state */
+		load_mm_cr4(next);
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+		/*
+		 * Load the LDT, if the LDT is different.
+		 *
+		 * It's possible that prev->context.ldt doesn't match
+		 * the LDT register.  This can happen if leave_mm(prev)
+		 * was called and then modify_ldt changed
+		 * prev->context.ldt but suppressed an IPI to this CPU.
+		 * In this case, prev->context.ldt != NULL, because we
+		 * never set context.ldt to NULL while the mm still
+		 * exists.  That means that next->context.ldt !=
+		 * prev->context.ldt, because mms never share an LDT.
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_mm_ldt(next);
+#endif
+	}
+#ifdef CONFIG_SMP
+	  else {
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
+
+		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
+			/*
+			 * On established mms, the mm_cpumask is only changed
+			 * from irq context, from ptep_clear_flush() while in
+			 * lazy tlb mode, and here. Irqs are blocked during
+			 * schedule, protecting us from simultaneous changes.
+			 */
+			cpumask_set_cpu(cpu, mm_cpumask(next));
+
+			/*
+			 * We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 *
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
+			 */
+			load_cr3(next->pgd);
+			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+			load_mm_cr4(next);
+			load_mm_ldt(next);
+		}
+	}
+#endif
+}
+
+#ifdef CONFIG_SMP
+
 /*
  * The flush IPI assumes that a thread switch happens in this order:
  * [cpu0: the cpu that switches]

[PATCH 4.4 12/78] x86/mm, sched/core: Turn off IRQs in switch_mm()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 078194f8e9fe3cf54c8fd8bded48a1db5bd8eb8a upstream.

Potential races between switch_mm() and TLB-flush or LDT-flush IPIs
could be very messy.  AFAICT the code is currently okay, whether by
accident or by careful design, but enabling PCID will make it
considerably more complicated and will no longer be obviously safe.

Fix it with a big hammer: run switch_mm() with IRQs off.

To avoid a performance hit in the scheduler, we take advantage of
our knowledge that the scheduler already has IRQs disabled when it
calls switch_mm().

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f19baf759693c9dcae64bbff76189db77cb13398.1461688545.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/mmu_context.h |    3 +++
 arch/x86/mm/tlb.c                  |   10 ++++++++++
 2 files changed, 13 insertions(+)

--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -107,6 +107,9 @@ static inline void enter_lazy_tlb(struct
 extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		      struct task_struct *tsk);
 
+extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
+			       struct task_struct *tsk);
+#define switch_mm_irqs_off switch_mm_irqs_off
 
 #define activate_mm(prev, next)			\
 do {						\
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -64,6 +64,16 @@ EXPORT_SYMBOL_GPL(leave_mm);
 void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	       struct task_struct *tsk)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm_irqs_off(prev, next, tsk);
+	local_irq_restore(flags);
+}
+
+void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
+			struct task_struct *tsk)
+{
 	unsigned cpu = smp_processor_id();
 
 	if (likely(prev != next)) {

[PATCH 4.4 13/78] ARM: Hide finish_arch_post_lock_switch() from modules

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <rostedt@goodmis.org>

commit ef0491ea17f8019821c7e9c8e801184ecf17f85a upstream.

The introduction of switch_mm_irqs_off() brought back an old bug
regarding the use of preempt_enable_no_resched:

As part of:

  62b94a08da1b ("sched/preempt: Take away preempt_enable_no_resched() from modules")

the definition of preempt_enable_no_resched() is only available in
built-in code, not in loadable modules, so we can't generally use
it from header files.

However, the ARM version of finish_arch_post_lock_switch()
calls preempt_enable_no_resched() and is defined as a static
inline function in asm/mmu_context.h. This in turn means we cannot
include asm/mmu_context.h from modules.

With today's tip tree, asm/mmu_context.h gets included from
linux/mmu_context.h, which is normally the exact pattern one would
expect, but unfortunately, linux/mmu_context.h can be included from
the vhost driver that is a loadable module, now causing this compile
time error with modular configs:

  In file included from ../include/linux/mmu_context.h:4:0,
                   from ../drivers/vhost/vhost.c:18:
  ../arch/arm/include/asm/mmu_context.h: In function 'finish_arch_post_lock_switch':
  ../arch/arm/include/asm/mmu_context.h:88:3: error: implicit declaration of function 'preempt_enable_no_resched' [-Werror=implicit-function-declaration]
     preempt_enable_no_resched();

Andy already tried to fix the bug by including linux/preempt.h
from asm/mmu_context.h, but that didn't help. Arnd suggested reordering
the header files, which wasn't popular, so let's use this
workaround instead:

The finish_arch_post_lock_switch() definition is now also hidden
inside of #ifdef MODULE, so we don't see anything referencing
preempt_enable_no_resched() from a header file. I've built a
few hundred randconfig kernels with this, and did not see any
new problems.

Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/1463146234-161304-1-git-send-email-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/mmu_context.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -61,6 +61,7 @@ static inline void check_and_switch_cont
 		cpu_switch_mm(mm->pgd, mm);
 }
 
+#ifndef MODULE
 #define finish_arch_post_lock_switch \
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
@@ -82,6 +83,7 @@ static inline void finish_arch_post_lock
 		preempt_enable_no_resched();
 	}
 }
+#endif /* !MODULE */
 
 #endif	/* CONFIG_MMU */
 

[PATCH 4.4 14/78] sched/core: Idle_task_exit() shouldnt use switch_mm_irqs_off()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 252d2a4117bc181b287eeddf848863788da733ae upstream.

idle_task_exit() can be called with IRQs on x86 on and therefore
should use switch_mm(), not switch_mm_irqs_off().

This doesn't seem to cause any problems right now, but it will
confuse my upcoming TLB flush changes.  Nonetheless, I think it
should be backported because it's trivial.  There won't be any
meaningful performance impact because idle_task_exit() is only
used when offlining a CPU.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: f98db6013c55 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sched/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5206,7 +5206,7 @@ void idle_task_exit(void)
 	BUG_ON(cpu_online(smp_processor_id()));
 
 	if (mm != &init_mm) {
-		switch_mm_irqs_off(mm, &init_mm, current);
+		switch_mm(mm, &init_mm, current);
 		finish_arch_post_lock_switch();
 	}
 	mmdrop(mm);

[PATCH 4.4 15/78] x86/irq: Do not substract irq_tlb_count from irq_call_count

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Lu <aaron.lu@intel.com>

commit 82ba4faca1bffad429f15c90c980ffd010366c25 upstream.

Since commit:

  52aec3308db8 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR")

the TLB remote shootdown is done through call function vector. That
commit didn't take care of irq_tlb_count, which a later commit:

  fd0f5869724f ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts")

... tried to fix.

The fix assumes every increase of irq_tlb_count has a corresponding
increase of irq_call_count. So the irq_call_count is always bigger than
irq_tlb_count and we could substract irq_tlb_count from irq_call_count.

Unfortunately this is not true for the smp_call_function_single() case.
The IPI is only sent if the target CPU's call_single_queue is empty when
adding a csd into it in generic_exec_single. That means if two threads
are both adding flush tlb csds to the same CPU's call_single_queue, only
one IPI is sent. In other words, the irq_call_count is incremented by 1
but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be
bigger than irq_call_count and the substract will produce a very large
irq_call_count value due to overflow.

Considering that:

  1) it's not worth to send more IPIs for the sake of accurate counting of
     irq_call_count in generic_exec_single();

  2) it's not easy to tell if the call function interrupt is for TLB
     shootdown in __smp_call_function_single_interrupt().

Not to exclude TLB shootdown from call function count seems to be the
simplest fix and this patch just does that.

This bug was found by LKP's cyclic performance regression tracking recently
with the vm-scalability test suite. I have bisected to commit:

  3dec0ba0be6a ("mm/rmap: share the i_mmap_rwsem")

This commit didn't do anything wrong but revealed the irq_call_count
problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file
concurrent with multiple threads.  When remap_one is try_to_unmap_one(),
then multiple threads could queue flush TLB to the same CPU but only
one IPI will be sent.

Since the commit was added in Linux v3.19, the counting problem only
shows up from v3.19 onwards.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/hardirq.h |    4 ----
 arch/x86/kernel/irq.c          |    3 +--
 2 files changed, 1 insertion(+), 6 deletions(-)

--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -22,10 +22,6 @@ typedef struct {
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
-	/*
-	 * irq_tlb_count is double-counted in irq_call_count, so it must be
-	 * subtracted from irq_call_count when displaying irq_call_count
-	 */
 	unsigned int irq_tlb_count;
 #endif
 #ifdef CONFIG_X86_THERMAL_VECTOR
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -102,8 +102,7 @@ int arch_show_interrupts(struct seq_file
 	seq_puts(p, "  Rescheduling interrupts\n");
 	seq_printf(p, "%*s: ", prec, "CAL");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count -
-					irq_stats(j)->irq_tlb_count);
+		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
 	seq_puts(p, "  Function call interrupts\n");
 	seq_printf(p, "%*s: ", prec, "TLB");
 	for_each_online_cpu(j)

[PATCH 4.4 16/78] ALSA: hda - add support for docking station for HP 820 G2

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaroslav Kysela <perex@perex.cz>


[ Upstream commit 04d5466a976b096364a39a63ac264c1b3a5f8fa1 ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4839,6 +4839,7 @@ enum {
 	ALC286_FIXUP_HP_GPIO_LED,
 	ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY,
 	ALC280_FIXUP_HP_DOCK_PINS,
+	ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED,
 	ALC280_FIXUP_HP_9480M,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
@@ -5377,6 +5378,16 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC280_FIXUP_HP_GPIO4
 	},
+	[ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x1b, 0x21011020 }, /* line-out */
+			{ 0x18, 0x2181103f }, /* line-in */
+			{ },
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_GPIO_MIC1_LED
+	},
 	[ALC280_FIXUP_HP_9480M] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc280_fixup_hp_9480m,
@@ -5629,7 +5640,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
-	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
+	SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2263, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2264, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -5794,6 +5805,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, .name = "headset-mode-no-hp-mic"},
 	{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
 	{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
+	{.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"},
 	{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
 	{.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"},
 	{.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-dac-wcaps"},

[PATCH 4.4 17/78] ALSA: hda - add support for docking station for HP 840 G3

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaroslav Kysela <perex@perex.cz>


[ Upstream commit cc3a47a248d7791ef0d2c81a35c46769e55e4c6c ]

This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 840 G3.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -261,6 +261,7 @@ enum {
 	CXT_FIXUP_HP_530,
 	CXT_FIXUP_CAP_MIX_AMP_5047,
 	CXT_FIXUP_MUTE_LED_EAPD,
+	CXT_FIXUP_HP_DOCK,
 	CXT_FIXUP_HP_SPECTRE,
 	CXT_FIXUP_HP_GATE_MIC,
 };
@@ -778,6 +779,14 @@ static const struct hda_fixup cxt_fixups
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_eapd,
 	},
+	[CXT_FIXUP_HP_DOCK] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x16, 0x21011020 }, /* line-out */
+			{ 0x18, 0x2181103f }, /* line-in */
+			{ }
+		}
+	},
 	[CXT_FIXUP_HP_SPECTRE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -839,6 +848,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC),
 	SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC),
+	SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
 	SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
 	SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
@@ -872,6 +882,7 @@ static const struct hda_model_fixup cxt5
 	{ .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" },
 	{ .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" },
 	{ .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" },
+	{ .id = CXT_FIXUP_HP_DOCK, .name = "hp-dock" },
 	{}
 };
 

[PATCH 4.4 18/78] arm: kprobes: Fix the return address of multiple kretprobes

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>


[ Upstream commit 06553175f585b52509c7df37d6f4a50aacb7b211 ]

This is arm port of commit 737480a0d525 ("kprobes/x86:
Fix the return address of multiple kretprobes").

Fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.

For example:

  # cd /sys/kernel/debug/tracing
  # echo "r:event1 sys_symlink" > kprobe_events
  # echo "r:event2 sys_symlink" >> kprobe_events
  # echo 1 > events/kprobes/enable
  # ln -s /tmp/foo /tmp/bar

 (without this patch)

  # cat trace | grep -v ^#
              ln-82    [000] dn.2    68.446525: event1: (kretprobe_trampoline+0x0/0x18 <- SyS_symlink)
              ln-82    [000] dn.2    68.447831: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

 (with this patch)

  # cat trace | grep -v ^#
              ln-81    [000] dn.1    39.463469: event1: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)
              ln-81    [000] dn.1    39.464701: event2: (ret_fast_syscall+0x0/0x1c <- SyS_symlink)

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: KUMANO Syuhei <kumano.prog@gmail.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/probes/kprobes/core.c |   24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -433,6 +433,7 @@ static __used __kprobes void *trampoline
 	struct hlist_node *tmp;
 	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -455,14 +456,34 @@ static __used __kprobes void *trampoline
 			/* another task is sharing our hash bucket */
 			continue;
 
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
 		if (ri->rp && ri->rp->handler) {
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
 			__this_cpu_write(current_kprobe, NULL);
 		}
 
-		orig_ret_address = (unsigned long)ri->ret_addr;
 		recycle_rp_inst(ri, &empty_rp);
 
 		if (orig_ret_address != trampoline_address)
@@ -474,7 +495,6 @@ static __used __kprobes void *trampoline
 			break;
 	}
 
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {

[PATCH 4.4 19/78] arm: kprobes: Align stack to 8-bytes in test code

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Medhurst <tixy@linaro.org>


[ Upstream commit 974310d047f3c7788a51d10c8d255eebdb1fa857 ]

kprobes test cases need to have a stack that is aligned to an 8-byte
boundary because they call other functions (and the ARM ABI mandates
that alignment) and because test cases include 64-bit accesses to the
stack. Unfortunately, GCC doesn't ensure this alignment for inline
assembler and for the code in question seems to always misalign it by
pushing just the LR register onto the stack. We therefore need to
explicitly perform stack alignment at the start of each test case.

Without this fix, some test cases will generate alignment faults on
systems where alignment is enforced. Even if the kernel is configured to
handle these faults in software, triggering them is ugly. It also
exposes limitations in the fault handling code which doesn't cope with
writes to the stack. E.g. when handling this instruction

   strd r6, [sp, #-64]!

the fault handling code will write to a stack location below the SP
value at the point the fault occurred, which coincides with where the
exception handler has pushed the saved register context. This results in
corruption of those registers.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/probes/kprobes/test-core.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/arch/arm/probes/kprobes/test-core.c
+++ b/arch/arm/probes/kprobes/test-core.c
@@ -976,7 +976,10 @@ static void coverage_end(void)
 void __naked __kprobes_test_case_start(void)
 {
 	__asm__ __volatile__ (
-		"stmdb	sp!, {r4-r11}				\n\t"
+		"mov	r2, sp					\n\t"
+		"bic	r3, r2, #7				\n\t"
+		"mov	sp, r3					\n\t"
+		"stmdb	sp!, {r2-r11}				\n\t"
 		"sub	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
 		"bic	r0, lr, #1  @ r0 = inline data		\n\t"
 		"mov	r1, sp					\n\t"
@@ -996,7 +999,8 @@ void __naked __kprobes_test_case_end_32(
 		"movne	pc, r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"mov	pc, r0					\n\t"
 	);
 }
@@ -1012,7 +1016,8 @@ void __naked __kprobes_test_case_end_16(
 		"bxne	r0					\n\t"
 		"mov	r0, r4					\n\t"
 		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
+		"ldmia	sp!, {r2-r11}				\n\t"
+		"mov	sp, r2					\n\t"
 		"bx	r0					\n\t"
 	);
 }

[PATCH 4.4 20/78] cpuidle: Validate cpu_dev in cpuidle_add_sysfs()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>


[ Upstream commit ad0a45fd9c14feebd000b6e84189d0edff265170 ]

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpuidle/sysfs.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -613,6 +613,18 @@ int cpuidle_add_sysfs(struct cpuidle_dev
 	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
+	/*
+	 * Return if cpu_device is not setup for this CPU.
+	 *
+	 * This could happen if the arch did not set up cpu_device
+	 * since this CPU is not in cpu_present mask and the
+	 * driver did not send a correct CPU mask during registration.
+	 * Without this check we would end up passing bogus
+	 * value for &cpu_dev->kobj in kobject_init_and_add()
+	 */
+	if (!cpu_dev)
+		return -ENODEV;
+
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev)
 		return -ENOMEM;

[PATCH 4.4 21/78] r8152: fix the list rx_done may be used without initialization

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: hayeswang <hayeswang@realtek.com>


[ Upstream commit 98d068ab52b4b11d403995ed14154660797e7136 ]

The list rx_done would be initialized when the linking on occurs.
Therefore, if a napi is scheduled without any linking on before,
the following kernel panic would happen.

	BUG: unable to handle kernel NULL pointer dereference at 000000000000008
	IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152]
	PGD 0
	Oops: 0002 [#1] SMP

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1277,6 +1277,7 @@ static int alloc_all_mem(struct r8152 *t
 	spin_lock_init(&tp->rx_lock);
 	spin_lock_init(&tp->tx_lock);
 	INIT_LIST_HEAD(&tp->tx_free);
+	INIT_LIST_HEAD(&tp->rx_done);
 	skb_queue_head_init(&tp->tx_queue);
 	skb_queue_head_init(&tp->rx_queue);
 

[PATCH 4.4 22/78] crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>


[ Upstream commit 8a0f5ccfb33b0b8b51de65b7b3bf342ba10b4fb6 ]

On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote:
>
> Yes, please.
> Disregarding some reports is not a good way long term.

Please try this patch.

---8<---
Subject: [PATCH 4.4 22/78] netlink: Annotate nlk cb_mutex by protocol

Currently all occurences of nlk->cb_mutex are annotated by lockdep
as a single class.  This causes a false lcokdep cycle involving
genl and crypto_user.

This patch fixes it by dividing cb_mutex into individual classes
based on the netlink protocol.  As genl and crypto_user do not
use the same netlink protocol this breaks the false dependency
loop.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/af_netlink.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -96,6 +96,44 @@ EXPORT_SYMBOL_GPL(nl_table);
 
 static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait);
 
+static struct lock_class_key nlk_cb_mutex_keys[MAX_LINKS];
+
+static const char *const nlk_cb_mutex_key_strings[MAX_LINKS + 1] = {
+	"nlk_cb_mutex-ROUTE",
+	"nlk_cb_mutex-1",
+	"nlk_cb_mutex-USERSOCK",
+	"nlk_cb_mutex-FIREWALL",
+	"nlk_cb_mutex-SOCK_DIAG",
+	"nlk_cb_mutex-NFLOG",
+	"nlk_cb_mutex-XFRM",
+	"nlk_cb_mutex-SELINUX",
+	"nlk_cb_mutex-ISCSI",
+	"nlk_cb_mutex-AUDIT",
+	"nlk_cb_mutex-FIB_LOOKUP",
+	"nlk_cb_mutex-CONNECTOR",
+	"nlk_cb_mutex-NETFILTER",
+	"nlk_cb_mutex-IP6_FW",
+	"nlk_cb_mutex-DNRTMSG",
+	"nlk_cb_mutex-KOBJECT_UEVENT",
+	"nlk_cb_mutex-GENERIC",
+	"nlk_cb_mutex-17",
+	"nlk_cb_mutex-SCSITRANSPORT",
+	"nlk_cb_mutex-ECRYPTFS",
+	"nlk_cb_mutex-RDMA",
+	"nlk_cb_mutex-CRYPTO",
+	"nlk_cb_mutex-SMC",
+	"nlk_cb_mutex-23",
+	"nlk_cb_mutex-24",
+	"nlk_cb_mutex-25",
+	"nlk_cb_mutex-26",
+	"nlk_cb_mutex-27",
+	"nlk_cb_mutex-28",
+	"nlk_cb_mutex-29",
+	"nlk_cb_mutex-30",
+	"nlk_cb_mutex-31",
+	"nlk_cb_mutex-MAX_LINKS"
+};
+
 static int netlink_dump(struct sock *sk);
 static void netlink_skb_destructor(struct sk_buff *skb);
 
@@ -585,6 +623,9 @@ static int __netlink_create(struct net *
 	} else {
 		nlk->cb_mutex = &nlk->cb_def_mutex;
 		mutex_init(nlk->cb_mutex);
+		lockdep_set_class_and_name(nlk->cb_mutex,
+					   nlk_cb_mutex_keys + protocol,
+					   nlk_cb_mutex_key_strings[protocol]);
 	}
 	init_waitqueue_head(&nlk->wait);
 

[PATCH 4.4 23/78] sch_dsmark: fix invalid skb_cow() usage

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit aea92fb2e09e29653b023d4254ac9fbf94221538 ]

skb_cow(skb, sizeof(ip header)) is not very helpful in this context.

First we need to use pskb_may_pull() to make sure the ip header
is in skb linear part, then use skb_try_make_writable() to
address clones issues.

Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_dsmark.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -199,9 +199,13 @@ static int dsmark_enqueue(struct sk_buff
 	pr_debug("%s(skb %p,sch %p,[qdisc %p])\n", __func__, skb, sch, p);
 
 	if (p->set_tc_index) {
+		int wlen = skb_network_offset(skb);
+
 		switch (tc_skb_protocol(skb)) {
 		case htons(ETH_P_IP):
-			if (skb_cow_head(skb, sizeof(struct iphdr)))
+			wlen += sizeof(struct iphdr);
+			if (!pskb_may_pull(skb, wlen) ||
+			    skb_try_make_writable(skb, wlen))
 				goto drop;
 
 			skb->tc_index = ipv4_get_dsfield(ip_hdr(skb))
@@ -209,7 +213,9 @@ static int dsmark_enqueue(struct sk_buff
 			break;
 
 		case htons(ETH_P_IPV6):
-			if (skb_cow_head(skb, sizeof(struct ipv6hdr)))
+			wlen += sizeof(struct ipv6hdr);
+			if (!pskb_may_pull(skb, wlen) ||
+			    skb_try_make_writable(skb, wlen))
 				goto drop;
 
 			skb->tc_index = ipv6_get_dsfield(ipv6_hdr(skb))

[PATCH 4.4 24/78] bna: integer overflow bug in debugfs

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit 13e2d5187f6b965ba3556caedb914baf81b98ed2 ]

We could allocate less memory than intended because we do:

	bnad->regdata = kzalloc(len << 2, GFP_KERNEL);

The shift can overflow leading to a crash.  This is debugfs code so the
impact is very small.

Fixes: 7afc5dbde091 ("bna: Add debugfs interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/brocade/bna/bnad_debugfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c
@@ -324,7 +324,7 @@ bnad_debugfs_write_regrd(struct file *fi
 		return PTR_ERR(kern_buf);
 
 	rc = sscanf(kern_buf, "%x:%x", &addr, &len);
-	if (rc < 2) {
+	if (rc < 2 || len > UINT_MAX >> 2) {
 		netdev_warn(bnad->netdev, "failed to read user buffer\n");
 		kfree(kern_buf);
 		return -EINVAL;

[PATCH 4.4 26/78] usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Quadros <rogerq@ti.com>


[ Upstream commit 16bb05d98c904a4f6c5ce7e2d992299f794acbf2 ]

As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor",
for interrupt and isochronous endpoints, wMaxPacketSize must be set to
1024 if the endpoint defines bMaxBurst to be greater than zero.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uvc.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -594,6 +594,14 @@ uvc_function_bind(struct usb_configurati
 	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
 	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
 
+	/* For SS, wMaxPacketSize has to be 1024 if bMaxBurst is not 0 */
+	if (opts->streaming_maxburst &&
+	    (opts->streaming_maxpacket % 1024) != 0) {
+		opts->streaming_maxpacket = roundup(opts->streaming_maxpacket, 1024);
+		INFO(cdev, "overriding streaming_maxpacket to %d\n",
+		     opts->streaming_maxpacket);
+	}
+
 	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
 	 * module parameters.
 	 *

[PATCH 4.4 27/78] usb: gadget: udc: remove pointer dereference after free

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>


[ Upstream commit 1f459262b0e1649a1e5ad12fa4c66eb76c2220ce ]

Remove pointer dereference after free.

Addresses-Coverity-ID: 1091173
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/pch_udc.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1534,7 +1534,6 @@ static void pch_udc_free_dma_chain(struc
 		td = phys_to_virt(addr);
 		addr2 = (dma_addr_t)td->next;
 		pci_pool_free(dev->data_requests, td, addr);
-		td->next = 0x00;
 		addr = addr2;
 	}
 	req->chain_len = 1;

[PATCH 4.4 28/78] netfilter: nfnl_cthelper: fix runtime expectation policy updates

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>


[ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ]

We only allow runtime updates of expectation policies for timeout and
maximum number of expectations, otherwise reject the update.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |   86 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 84 insertions(+), 2 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -256,6 +256,89 @@ err:
 }
 
 static int
+nfnl_cthelper_update_policy_one(const struct nf_conntrack_expect_policy *policy,
+				struct nf_conntrack_expect_policy *new_policy,
+				const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_MAX + 1];
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_MAX, attr,
+			       nfnl_cthelper_expect_pol);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_NAME] ||
+	    !tb[NFCTH_POLICY_EXPECT_MAX] ||
+	    !tb[NFCTH_POLICY_EXPECT_TIMEOUT])
+		return -EINVAL;
+
+	if (nla_strcmp(tb[NFCTH_POLICY_NAME], policy->name))
+		return -EBUSY;
+
+	new_policy->max_expected =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_MAX]));
+	new_policy->timeout =
+		ntohl(nla_get_be32(tb[NFCTH_POLICY_EXPECT_TIMEOUT]));
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy_all(struct nlattr *tb[],
+					   struct nf_conntrack_helper *helper)
+{
+	struct nf_conntrack_expect_policy new_policy[helper->expect_class_max + 1];
+	struct nf_conntrack_expect_policy *policy;
+	int i, err;
+
+	/* Check first that all policy attributes are well-formed, so we don't
+	 * leave things in inconsistent state on errors.
+	 */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+
+		if (!tb[NFCTH_POLICY_SET + i])
+			return -EINVAL;
+
+		err = nfnl_cthelper_update_policy_one(&helper->expect_policy[i],
+						      &new_policy[i],
+						      tb[NFCTH_POLICY_SET + i]);
+		if (err < 0)
+			return err;
+	}
+	/* Now we can safely update them. */
+	for (i = 0; i < helper->expect_class_max + 1; i++) {
+		policy = (struct nf_conntrack_expect_policy *)
+				&helper->expect_policy[i];
+		policy->max_expected = new_policy->max_expected;
+		policy->timeout	= new_policy->timeout;
+	}
+
+	return 0;
+}
+
+static int nfnl_cthelper_update_policy(struct nf_conntrack_helper *helper,
+				       const struct nlattr *attr)
+{
+	struct nlattr *tb[NFCTH_POLICY_SET_MAX + 1];
+	unsigned int class_max;
+	int err;
+
+	err = nla_parse_nested(tb, NFCTH_POLICY_SET_MAX, attr,
+			       nfnl_cthelper_expect_policy_set);
+	if (err < 0)
+		return err;
+
+	if (!tb[NFCTH_POLICY_SET_NUM])
+		return -EINVAL;
+
+	class_max = ntohl(nla_get_be32(tb[NFCTH_POLICY_SET_NUM]));
+	if (helper->expect_class_max + 1 != class_max)
+		return -EBUSY;
+
+	return nfnl_cthelper_update_policy_all(tb, helper);
+}
+
+static int
 nfnl_cthelper_update(const struct nlattr * const tb[],
 		     struct nf_conntrack_helper *helper)
 {
@@ -265,8 +348,7 @@ nfnl_cthelper_update(const struct nlattr
 		return -EBUSY;
 
 	if (tb[NFCTH_POLICY]) {
-		ret = nfnl_cthelper_parse_expect_policy(helper,
-							tb[NFCTH_POLICY]);
+		ret = nfnl_cthelper_update_policy(helper, tb[NFCTH_POLICY]);
 		if (ret < 0)
 			return ret;
 	}

[PATCH 4.4 29/78] netfilter: nfnl_cthelper: Fix memory leak

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeffy Chen <jeffy.chen@rock-chips.com>


[ Upstream commit f83bf8da1135ca635aac8f062cad3f001fcf3a26 ]

We have memory leaks of nf_conntrack_helper & expect_policy.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -216,7 +216,7 @@ nfnl_cthelper_create(const struct nlattr
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
-		goto err;
+		goto err1;
 
 	strncpy(helper->name, nla_data(tb[NFCTH_NAME]), NF_CT_HELPER_NAME_LEN);
 	helper->data_len = ntohl(nla_get_be32(tb[NFCTH_PRIV_DATA_LEN]));
@@ -247,10 +247,12 @@ nfnl_cthelper_create(const struct nlattr
 
 	ret = nf_conntrack_helper_register(helper);
 	if (ret < 0)
-		goto err;
+		goto err2;
 
 	return 0;
-err:
+err2:
+	kfree(helper->expect_policy);
+err1:
 	kfree(helper);
 	return ret;
 }
@@ -696,6 +698,8 @@ nfnl_cthelper_del(struct sock *nfnl, str
 
 			found = true;
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 	/* Make sure we return success if we flush and there is no helpers */
@@ -759,6 +763,8 @@ static void __exit nfnl_cthelper_exit(vo
 				continue;
 
 			nf_conntrack_helper_unregister(cur);
+			kfree(cur->expect_policy);
+			kfree(cur);
 		}
 	}
 }

[PATCH 4.4 30/78] inet: frag: release spinlock before calling icmp_send()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit ec4fbd64751de18729eaa816ec69e4b504b5a7a2 ]

Dmitry reported a lockdep splat [1] (false positive) that we can fix
by releasing the spinlock before calling icmp_send() from ip_expire()

This is a false positive because sending an ICMP message can not
possibly re-enter the IP frag engine.

[1]
[ INFO: possible circular locking dependency detected ]
4.10.0+ #29 Not tainted
-------------------------------------------------------
modprobe/12392 is trying to acquire lock:
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock
include/linux/spinlock.h:299 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock
include/linux/netdevice.h:3486 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180

but task is already holding lock:
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&q->lock)->rlock){+.-...}:
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669
       ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713
       packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459
       deliver_skb net/core/dev.c:1834 [inline]
       dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890
       xmit_one net/core/dev.c:2903 [inline]
       dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923
       sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308
       neigh_output include/net/neighbour.h:478 [inline]
       ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228
       ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672
       ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545
       ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655
       inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985
       __sys_sendmmsg+0x25c/0x750 net/socket.c:2075
       SYSC_sendmmsg net/socket.c:2106 [inline]
       SyS_sendmmsg+0x35/0x60 net/socket.c:2101
       do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281
       return_from_SYSCALL_64+0x0/0x7a

-> #0 (_xmit_ETHER#2){+.-...}:
       check_prev_add kernel/locking/lockdep.c:1830 [inline]
       check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       __netif_tx_lock include/linux/netdevice.h:3486 [inline]
       sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_hh_output include/net/neighbour.h:468 [inline]
       neigh_output include/net/neighbour.h:476 [inline]
       ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
       ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
       icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
       ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
       call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
       expire_timers kernel/time/timer.c:1307 [inline]
       __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
       run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
       __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1cc/0x200 kernel/softirq.c:405
       exiting_irq arch/x86/include/asm/apic.h:657 [inline]
       smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
       apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
       __read_once_size include/linux/compiler.h:254 [inline]
       atomic_read arch/x86/include/asm/atomic.h:26 [inline]
       rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
       __rcu_is_watching kernel/rcu/tree.c:1133 [inline]
       rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
       rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
       radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
       filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
       do_fault_around mm/memory.c:3231 [inline]
       do_read_fault mm/memory.c:3265 [inline]
       do_fault+0xbd5/0x2080 mm/memory.c:3370
       handle_pte_fault mm/memory.c:3600 [inline]
       __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
       handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
       __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
       do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
       page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&q->lock)->rlock);
                               lock(_xmit_ETHER#2);
                               lock(&(&q->lock)->rlock);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

10 locks held by modprobe/12392:
 #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>]
__do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336
 #1:  (rcu_read_lock){......}, at: [<ffffffff8188cab6>]
filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
spin_lock include/linux/spinlock.h:299 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
pte_alloc_one_map mm/memory.c:2944 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201
 #5:  (rcu_read_lock){......}, at: [<ffffffff8389a633>]
ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock
include/linux/spinlock.h:309 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock
net/ipv4/icmp.c:219 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>]
icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681
 #7:  (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>]
ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198
 #8:  (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>]
__dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324
 #9:  (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at:
[<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423

stack backtrace:
CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204
 check_prev_add kernel/locking/lockdep.c:1830 [inline]
 check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
 validate_chain kernel/locking/lockdep.c:2267 [inline]
 __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:299 [inline]
 __netif_tx_lock include/linux/netdevice.h:3486 [inline]
 sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
 __dev_xmit_skb net/core/dev.c:3092 [inline]
 __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
 neigh_hh_output include/net/neighbour.h:468 [inline]
 neigh_output include/net/neighbour.h:476 [inline]
 ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
 expire_timers kernel/time/timer.c:1307 [inline]
 __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:657 [inline]
 smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline]
RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c
RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000
R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25
R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000
 </IRQ>
 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
 filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
 do_fault_around mm/memory.c:3231 [inline]
 do_read_fault mm/memory.c:3265 [inline]
 do_fault+0xbd5/0x2080 mm/memory.c:3370
 handle_pte_fault mm/memory.c:3600 [inline]
 __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011
RIP: 0033:0x7f83172f2786
RSP: 002b:00007fffe859ae80 EFLAGS: 00010293
RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970
RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000
R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040
R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_fragment.c |   25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -200,6 +200,7 @@ static void ip_expire(unsigned long arg)
 	qp = container_of((struct inet_frag_queue *) arg, struct ipq, q);
 	net = container_of(qp->q.net, struct net, ipv4.frags);
 
+	rcu_read_lock();
 	spin_lock(&qp->q.lock);
 
 	if (qp->q.flags & INET_FRAG_COMPLETE)
@@ -209,7 +210,7 @@ static void ip_expire(unsigned long arg)
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMFAILS);
 
 	if (!inet_frag_evicting(&qp->q)) {
-		struct sk_buff *head = qp->q.fragments;
+		struct sk_buff *clone, *head = qp->q.fragments;
 		const struct iphdr *iph;
 		int err;
 
@@ -218,32 +219,40 @@ static void ip_expire(unsigned long arg)
 		if (!(qp->q.flags & INET_FRAG_FIRST_IN) || !qp->q.fragments)
 			goto out;
 
-		rcu_read_lock();
 		head->dev = dev_get_by_index_rcu(net, qp->iif);
 		if (!head->dev)
-			goto out_rcu_unlock;
+			goto out;
+
 
 		/* skb has no dst, perform route lookup again */
 		iph = ip_hdr(head);
 		err = ip_route_input_noref(head, iph->daddr, iph->saddr,
 					   iph->tos, head->dev);
 		if (err)
-			goto out_rcu_unlock;
+			goto out;
 
 		/* Only an end host needs to send an ICMP
 		 * "Fragment Reassembly Timeout" message, per RFC792.
 		 */
 		if (frag_expire_skip_icmp(qp->user) &&
 		    (skb_rtable(head)->rt_type != RTN_LOCAL))
-			goto out_rcu_unlock;
+			goto out;
+
+		clone = skb_clone(head, GFP_ATOMIC);
 
 		/* Send an ICMP "Fragment Reassembly Timeout" message. */
-		icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
-out_rcu_unlock:
-		rcu_read_unlock();
+		if (clone) {
+			spin_unlock(&qp->q.lock);
+			icmp_send(clone, ICMP_TIME_EXCEEDED,
+				  ICMP_EXC_FRAGTIME, 0);
+			consume_skb(clone);
+			goto out_rcu_unlock;
+		}
 	}
 out:
 	spin_unlock(&qp->q.lock);
+out_rcu_unlock:
+	rcu_read_unlock();
 	ipq_put(qp);
 }
 

[PATCH 4.4 31/78] pinctrl: st: add irq_request/release_resources callbacks

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrice Chotard <patrice.chotard@st.com>


[ Upstream commit e855fa9a65c40788b5069abb0d094537daa22e05 ]

When using GPIO as IRQ source, the GPIO must be configured
in INPUT. Callbacks dedicated for this was missing in
pinctrl-st driver.

This fix the following kernel error when trying to lock a gpio
as IRQ:

[    7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[    7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[    7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinctrl-st.c |   30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -1338,6 +1338,22 @@ static void st_gpio_irq_unmask(struct ir
 	writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
 }
 
+static int st_gpio_irq_request_resources(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	st_gpio_direction_input(gc, d->hwirq);
+
+	return gpiochip_lock_as_irq(gc, d->hwirq);
+}
+
+static void st_gpio_irq_release_resources(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	gpiochip_unlock_as_irq(gc, d->hwirq);
+}
+
 static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -1493,12 +1509,14 @@ static struct gpio_chip st_gpio_template
 };
 
 static struct irq_chip st_gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_disable	= st_gpio_irq_mask,
-	.irq_mask	= st_gpio_irq_mask,
-	.irq_unmask	= st_gpio_irq_unmask,
-	.irq_set_type	= st_gpio_irq_set_type,
-	.flags		= IRQCHIP_SKIP_SET_WAKE,
+	.name			= "GPIO",
+	.irq_request_resources	= st_gpio_irq_request_resources,
+	.irq_release_resources	= st_gpio_irq_release_resources,
+	.irq_disable		= st_gpio_irq_mask,
+	.irq_mask		= st_gpio_irq_mask,
+	.irq_unmask		= st_gpio_irq_unmask,
+	.irq_set_type		= st_gpio_irq_set_type,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
 static int st_gpiolib_register_bank(struct st_pinctrl *info,

[PATCH 4.4 32/78] scsi: lpfc: Fix PT2PT PRLI reject

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ]

lpfc cannot establish connection with targets that send PRLI in P2P
configurations.

If lpfc rejects a PRLI that is sent from a target the target will not
resend and will reject the PRLI send from the initiator.

[mkp: applied by hand]

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_els.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7491,7 +7491,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *p
 			did, vport->port_state, ndlp->nlp_flag);
 
 		phba->fc_stat.elsRcvPRLI++;
-		if (vport->port_state < LPFC_DISC_AUTH) {
+		if ((vport->port_state < LPFC_DISC_AUTH) &&
+		    (vport->fc_flag & FC_FABRIC)) {
 			rjt_err = LSRJT_UNABLE_TPC;
 			rjt_exp = LSEXP_NOTHING_MORE;
 			break;

[PATCH 4.4 36/78] hwmon: (asus_atk0110) fix uninitialized data access

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit a2125d02443e9a4e68bcfd9f8004fa23239e8329 ]

The latest gcc-7 snapshot adds a warning to point out that when
atk_read_value_old or atk_read_value_new fails, we copy
uninitialized data into sensor->cached_value:

drivers/hwmon/asus_atk0110.c: In function 'atk_input_show':
drivers/hwmon/asus_atk0110.c:651:26: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Adding an error check avoids this. All versions of the driver
are affected.

Fixes: 2c03d07ad54d ("hwmon: Add Asus ATK0110 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/asus_atk0110.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -646,6 +646,9 @@ static int atk_read_value(struct atk_sen
 		else
 			err = atk_read_value_new(sensor, value);
 
+		if (err)
+			return err;
+
 		sensor->is_valid = true;
 		sensor->last_updated = jiffies;
 		sensor->cached_value = *value;

[PATCH 4.4 37/78] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <mike.looijmans@topic.nl>


[ Upstream commit dbe4d69d252e9e65c6c46826980b77b11a142065 ]

The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/muxes/i2c-mux-pca954x.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -94,6 +94,10 @@ static const struct chip_desc chips[] =
 		.nchans = 4,
 		.muxtype = pca954x_isswi,
 	},
+	[pca_9546] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+	},
 	[pca_9547] = {
 		.nchans = 8,
 		.enable = 0x8,
@@ -111,7 +115,7 @@ static const struct i2c_device_id pca954
 	{ "pca9543", pca_9543 },
 	{ "pca9544", pca_9544 },
 	{ "pca9545", pca_9545 },
-	{ "pca9546", pca_9545 },
+	{ "pca9546", pca_9546 },
 	{ "pca9547", pca_9547 },
 	{ "pca9548", pca_9548 },
 	{ }

[PATCH 4.4 38/78] HID: xinmo: fix for out of range for THT 2P arcade controller.

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Stein <peter@stuntstein.dk>


[ Upstream commit 9257821c5a1dc57ef3a37f7cbcebaf548395c964 ]

There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original.  This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1.  In details the new device ID is added the
hid-id list and the hid-xinmo source code.

Signed-off-by: Peter Stein <peter@stuntstein.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c  |    1 +
 drivers/hid/hid-ids.h   |    1 +
 drivers/hid/hid-xinmo.c |    1 +
 3 files changed, 3 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2053,6 +2053,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1021,6 +1021,7 @@
 
 #define USB_VENDOR_ID_XIN_MO			0x16c0
 #define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE	0x05e1
+#define USB_DEVICE_ID_THT_2P_ARCADE		0x75e1
 
 #define USB_VENDOR_ID_XIROKU		0x1477
 #define USB_DEVICE_ID_XIROKU_SPX	0x1006
--- a/drivers/hid/hid-xinmo.c
+++ b/drivers/hid/hid-xinmo.c
@@ -46,6 +46,7 @@ static int xinmo_event(struct hid_device
 
 static const struct hid_device_id xinmo_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
 	{ }
 };
 

[PATCH 4.4 39/78] r8152: prevent the driver from transmitting packets with carrier off

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: hayeswang <hayeswang@realtek.com>


[ Upstream commit 2f25abe6bac573928a990ccbdac75873add8127e ]

The linking status may be changed when autosuspend. And, after
autoresume, the driver may try to transmit packets when the device
is carrier off, because the interrupt transfer doesn't update the
linking status, yet. And, if the device is in ALDPS mode, the device
would stop working.

The another similar case is
 1. unplug the cable.
 2. interrupt transfer queue a work_queue for linking change.
 3. device enters the ALDPS mode.
 4. a tx occurs before the work_queue is called.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1207,6 +1207,7 @@ static void intr_callback(struct urb *ur
 		}
 	} else {
 		if (netif_carrier_ok(tp->netdev)) {
+			netif_stop_queue(tp->netdev);
 			set_bit(RTL8152_LINK_CHG, &tp->flags);
 			schedule_delayed_work(&tp->schedule, 0);
 		}
@@ -3001,6 +3002,9 @@ static void set_carrier(struct r8152 *tp
 			napi_enable(&tp->napi);
 			netif_wake_queue(netdev);
 			netif_info(tp, link, netdev, "carrier on\n");
+		} else if (netif_queue_stopped(netdev) &&
+			   skb_queue_len(&tp->tx_queue) < tp->tx_qlen) {
+			netif_wake_queue(netdev);
 		}
 	} else {
 		if (netif_carrier_ok(netdev)) {
@@ -3561,8 +3565,18 @@ static int rtl8152_resume(struct usb_int
 			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 			napi_disable(&tp->napi);
 			set_bit(WORK_ENABLE, &tp->flags);
-			if (netif_carrier_ok(tp->netdev))
-				rtl_start_rx(tp);
+
+			if (netif_carrier_ok(tp->netdev)) {
+				if (rtl8152_get_speed(tp) & LINK_STATUS) {
+					rtl_start_rx(tp);
+				} else {
+					netif_carrier_off(tp->netdev);
+					tp->rtl_ops.disable(tp);
+					netif_info(tp, link, tp->netdev,
+						   "linking down\n");
+				}
+			}
+
 			napi_enable(&tp->napi);
 		} else {
 			tp->rtl_ops.up(tp);

[PATCH 4.4 40/78] s390/qeth: no ETH header for outbound AF_IUCV

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@linux.vnet.ibm.com>


[ Upstream commit acd9776b5c45ef02d1a210969a6fcc058afb76e3 ]

With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte
slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr()
fills this ETH header... and then immediately moves it to the
skb's headroom, where it disappears and is never seen again.

But it's still possible for us to return NETDEV_TX_BUSY after the skb has
been modified. Since we didn't get a private copy of the skb, the next
time the skb is delivered to hard_start_xmit() it no longer has the
expected layout (we moved the ETH header to the headroom, so skb->data
now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr()
does another round of rebuilding, the resulting qeth header ends up
all wrong. On transmission, the buffer is then rejected by
the HiperSockets device with SBALF15 = x'04'.
When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it
tears down the offending socket.

As the ETH header for AF_IUCV serves no purpose, just align the code to
what we do for IP traffic on L3 HiperSockets: keep the ETH header at
skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer().
When mapping the payload into the SBAL elements, the ETH header is then
stripped off. This avoids the skb manipulations in
qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit()
after NETDEV_TX_BUSY is now processed properly.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/net/qeth_l3_main.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2680,17 +2680,13 @@ static void qeth_l3_fill_af_iucv_hdr(str
 	char daddr[16];
 	struct af_iucv_trans_hdr *iucv_hdr;
 
-	skb_pull(skb, 14);
-	card->dev->header_ops->create(skb, card->dev, 0,
-				      card->dev->dev_addr, card->dev->dev_addr,
-				      card->dev->addr_len);
-	skb_pull(skb, 14);
-	iucv_hdr = (struct af_iucv_trans_hdr *)skb->data;
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3;
 	hdr->hdr.l3.ext_flags = 0;
-	hdr->hdr.l3.length = skb->len;
+	hdr->hdr.l3.length = skb->len - ETH_HLEN;
 	hdr->hdr.l3.flags = QETH_HDR_IPV6 | QETH_CAST_UNICAST;
+
+	iucv_hdr = (struct af_iucv_trans_hdr *) (skb->data + ETH_HLEN);
 	memset(daddr, 0, sizeof(daddr));
 	daddr[0] = 0xfe;
 	daddr[1] = 0x80;
@@ -2873,10 +2869,7 @@ static int qeth_l3_hard_start_xmit(struc
 	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
 	    (skb_shinfo(skb)->nr_frags == 0)) {
 		new_skb = skb;
-		if (new_skb->protocol == ETH_P_AF_IUCV)
-			data_offset = 0;
-		else
-			data_offset = ETH_HLEN;
+		data_offset = ETH_HLEN;
 		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
 		if (!hdr)
 			goto tx_drop;

[PATCH 4.4 41/78] bna: avoid writing uninitialized data into hw registers

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit a5af83925363eb85d467933e3d6ec5a87001eb7c ]

The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable
writing undefined values into the hardware registers:

drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry':
arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized]
arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized]

The two functions look like they should do the same thing, but only one
of them initializes the time stamp and clscode field. The fact that we
only get a warning for one of the two functions seems to be arbitrary,
based on the inlining decisions in the compiler.

To address this, I'm making both functions do the same thing:

- set the clscode from the ioc structure in both
- set the time stamp from ktime_get_real_seconds (which also
  avoids the signed-integer overflow in 2038 and extends the
  well-defined behavior until 2106).
- zero-fill the reserved field

Fixes: 8b230ed8ec96 ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/brocade/bna/bfa_ioc.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1930,13 +1930,13 @@ static void
 bfa_ioc_send_enable(struct bfa_ioc *ioc)
 {
 	struct bfi_ioc_ctrl_req enable_req;
-	struct timeval tv;
 
 	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
 		    bfa_ioc_portid(ioc));
 	enable_req.clscode = htons(ioc->clscode);
-	do_gettimeofday(&tv);
-	enable_req.tv_sec = ntohl(tv.tv_sec);
+	enable_req.rsvd = htons(0);
+	/* overflow in 2106 */
+	enable_req.tv_sec = ntohl(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req));
 }
 
@@ -1947,6 +1947,10 @@ bfa_ioc_send_disable(struct bfa_ioc *ioc
 
 	bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ,
 		    bfa_ioc_portid(ioc));
+	disable_req.clscode = htons(ioc->clscode);
+	disable_req.rsvd = htons(0);
+	/* overflow in 2106 */
+	disable_req.tv_sec = ntohl(ktime_get_real_seconds());
 	bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req));
 }
 

[PATCH 4.4 42/78] net: Do not allow negative values for busy_read and busy_poll sysctl interfaces

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Duyck <alexander.h.duyck@intel.com>


[ Upstream commit 95f255211396958c718aef8c45e3923b5211ea7b ]

This change basically codifies what I think was already the limitations on
the busy_poll and busy_read sysctl interfaces.  We weren't checking the
lower bounds and as such could input negative values. The behavior when
that was used was dependent on the architecture. In order to prevent any
issues with that I am just disabling support for values less than 0 since
this way we don't have to worry about any odd behaviors.

By limiting the sysctl values this way it also makes it consistent with how
we handle the SO_BUSY_POLL socket option since the value appears to be
reported as a signed integer value and negative values are rejected.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sysctl_net_core.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -360,14 +360,16 @@ static struct ctl_table net_core_table[]
 		.data		= &sysctl_net_busy_poll,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 	{
 		.procname	= "busy_read",
 		.data		= &sysctl_net_busy_read,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
 	},
 #endif
 #ifdef CONFIG_NET_SCHED

[PATCH 4.4 43/78] i40e: Do not enable NAPI on q_vectors that have no rings

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Duyck <alexander.h.duyck@intel.com>


[ Upstream commit 13a8cd191a2b470cfd435b3b57dbd21aa65ff78c ]

When testing the epoll w/ busy poll code I found that I could get into a
state where the i40e driver had q_vectors w/ active NAPI that had no rings.
This was resulting in a divide by zero error.  To correct it I am updating
the driver code so that we only support NAPI on q_vectors that have 1 or
more rings allocated to them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4201,8 +4201,12 @@ static void i40e_napi_enable_all(struct
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_enable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_enable(&q_vector->napi);
+	}
 }
 
 /**
@@ -4216,8 +4220,12 @@ static void i40e_napi_disable_all(struct
 	if (!vsi->netdev)
 		return;
 
-	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++)
-		napi_disable(&vsi->q_vectors[q_idx]->napi);
+	for (q_idx = 0; q_idx < vsi->num_q_vectors; q_idx++) {
+		struct i40e_q_vector *q_vector = vsi->q_vectors[q_idx];
+
+		if (q_vector->rx.ring || q_vector->tx.ring)
+			napi_disable(&q_vector->napi);
+	}
 }
 
 /**

[PATCH 4.4 44/78] RDMA/iser: Fix possible mr leak on device removal event

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sagi Grimberg <sagi@grimberg.me>


[ Upstream commit ea174c9573b0e0c8bc1a7a90fe9360ccb7aa9cbb ]

When the rdma device is removed, we must cleanup all
the rdma resources within the DEVICE_REMOVAL event
handler to let the device teardown gracefully. When
this happens with live I/O, some memory regions are
occupied. Thus, track them too and dereg all the mr's.

We are safe with mr access by iscsi_iser_cleanup_task.

Reported-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/iser/iscsi_iser.h |    2 ++
 drivers/infiniband/ulp/iser/iser_verbs.c |    8 +++++---
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -450,6 +450,7 @@ struct iser_fr_desc {
 	struct list_head		  list;
 	struct iser_reg_resources	  rsc;
 	struct iser_pi_context		 *pi_ctx;
+	struct list_head                  all_list;
 };
 
 /**
@@ -463,6 +464,7 @@ struct iser_fr_pool {
 	struct list_head        list;
 	spinlock_t              lock;
 	int                     size;
+	struct list_head        all_list;
 };
 
 /**
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -405,6 +405,7 @@ int iser_alloc_fastreg_pool(struct ib_co
 	int i, ret;
 
 	INIT_LIST_HEAD(&fr_pool->list);
+	INIT_LIST_HEAD(&fr_pool->all_list);
 	spin_lock_init(&fr_pool->lock);
 	fr_pool->size = 0;
 	for (i = 0; i < cmds_max; i++) {
@@ -416,6 +417,7 @@ int iser_alloc_fastreg_pool(struct ib_co
 		}
 
 		list_add_tail(&desc->list, &fr_pool->list);
+		list_add_tail(&desc->all_list, &fr_pool->all_list);
 		fr_pool->size++;
 	}
 
@@ -435,13 +437,13 @@ void iser_free_fastreg_pool(struct ib_co
 	struct iser_fr_desc *desc, *tmp;
 	int i = 0;
 
-	if (list_empty(&fr_pool->list))
+	if (list_empty(&fr_pool->all_list))
 		return;
 
 	iser_info("freeing conn %p fr pool\n", ib_conn);
 
-	list_for_each_entry_safe(desc, tmp, &fr_pool->list, list) {
-		list_del(&desc->list);
+	list_for_each_entry_safe(desc, tmp, &fr_pool->all_list, all_list) {
+		list_del(&desc->all_list);
 		iser_free_reg_res(&desc->rsc);
 		if (desc->pi_ctx)
 			iser_free_pi_ctx(desc->pi_ctx);

[PATCH 4.4 45/78] irda: vlsi_ir: fix check for DMA mapping errors

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>


[ Upstream commit 6ac3b77a6ffff7513ff86b684aa256ea01c0e5b5 ]

vlsi_alloc_ring() checks for DMA mapping errors by comparing
returned address with zero, while pci_dma_mapping_error() should be used.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/irda/vlsi_ir.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -418,8 +418,9 @@ static struct vlsi_ring *vlsi_alloc_ring
 		memset(rd, 0, sizeof(*rd));
 		rd->hw = hwmap + i;
 		rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
-		if (rd->buf == NULL ||
-		    !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+		if (rd->buf)
+			busaddr = pci_map_single(pdev, rd->buf, len, dir);
+		if (rd->buf == NULL || pci_dma_mapping_error(pdev, busaddr)) {
 			if (rd->buf) {
 				net_err_ratelimited("%s: failed to create PCI-MAP for %p\n",
 						    __func__, rd->buf);
@@ -430,8 +431,7 @@ static struct vlsi_ring *vlsi_alloc_ring
 				rd = r->rd + j;
 				busaddr = rd_get_addr(rd);
 				rd_set_addr_status(rd, 0, 0);
-				if (busaddr)
-					pci_unmap_single(pdev, busaddr, len, dir);
+				pci_unmap_single(pdev, busaddr, len, dir);
 				kfree(rd->buf);
 				rd->buf = NULL;
 			}

[PATCH 4.4 46/78] netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liping Zhang <zlpnobody@gmail.com>


[ Upstream commit 83d90219a5df8d950855ce73229a97b63605c317 ]

The nf_ct_helper_hash table is protected by nf_ct_helper_mutex, while
nfct_helper operation is protected by nfnl_lock(NFNL_SUBSYS_CTHELPER).
So it's possible that one CPU is walking the nf_ct_helper_hash for
cthelper add/get/del, another cpu is doing nf_conntrack_helpers_unregister
at the same time. This is dangrous, and may cause use after free error.

Note, delete operation will flush all cthelpers added via nfnetlink, so
using rcu to do protect is not easy.

Now introduce a dummy list to record all the cthelpers added via
nfnetlink, then we can walk the dummy list instead of walking the
nf_ct_helper_hash. Also, keep nfnl_cthelper_dump_table unchanged, it
may be invoked without nfnl_lock(NFNL_SUBSYS_CTHELPER) held.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_cthelper.c |  185 +++++++++++++++++--------------------
 1 file changed, 85 insertions(+), 100 deletions(-)

--- a/net/netfilter/nfnetlink_cthelper.c
+++ b/net/netfilter/nfnetlink_cthelper.c
@@ -32,6 +32,13 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
 MODULE_DESCRIPTION("nfnl_cthelper: User-space connection tracking helpers");
 
+struct nfnl_cthelper {
+	struct list_head		list;
+	struct nf_conntrack_helper	helper;
+};
+
+static LIST_HEAD(nfnl_cthelper_list);
+
 static int
 nfnl_userspace_cthelper(struct sk_buff *skb, unsigned int protoff,
 			struct nf_conn *ct, enum ip_conntrack_info ctinfo)
@@ -205,14 +212,16 @@ nfnl_cthelper_create(const struct nlattr
 		     struct nf_conntrack_tuple *tuple)
 {
 	struct nf_conntrack_helper *helper;
+	struct nfnl_cthelper *nfcth;
 	int ret;
 
 	if (!tb[NFCTH_TUPLE] || !tb[NFCTH_POLICY] || !tb[NFCTH_PRIV_DATA_LEN])
 		return -EINVAL;
 
-	helper = kzalloc(sizeof(struct nf_conntrack_helper), GFP_KERNEL);
-	if (helper == NULL)
+	nfcth = kzalloc(sizeof(*nfcth), GFP_KERNEL);
+	if (nfcth == NULL)
 		return -ENOMEM;
+	helper = &nfcth->helper;
 
 	ret = nfnl_cthelper_parse_expect_policy(helper, tb[NFCTH_POLICY]);
 	if (ret < 0)
@@ -249,11 +258,12 @@ nfnl_cthelper_create(const struct nlattr
 	if (ret < 0)
 		goto err2;
 
+	list_add_tail(&nfcth->list, &nfnl_cthelper_list);
 	return 0;
 err2:
 	kfree(helper->expect_policy);
 err1:
-	kfree(helper);
+	kfree(nfcth);
 	return ret;
 }
 
@@ -379,7 +389,8 @@ nfnl_cthelper_new(struct sock *nfnl, str
 	const char *helper_name;
 	struct nf_conntrack_helper *cur, *helper = NULL;
 	struct nf_conntrack_tuple tuple;
-	int ret = 0, i;
+	struct nfnl_cthelper *nlcth;
+	int ret = 0;
 
 	if (!tb[NFCTH_NAME] || !tb[NFCTH_TUPLE])
 		return -EINVAL;
@@ -390,31 +401,22 @@ nfnl_cthelper_new(struct sock *nfnl, str
 	if (ret < 0)
 		return ret;
 
-	rcu_read_lock();
-	for (i = 0; i < nf_ct_helper_hsize && !helper; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+		if (strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
 
-			if (strncmp(cur->name, helper_name,
-					NF_CT_HELPER_NAME_LEN) != 0)
-				continue;
+		if ((tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
 
-			if ((tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+		if (nlh->nlmsg_flags & NLM_F_EXCL)
+			return -EEXIST;
 
-			if (nlh->nlmsg_flags & NLM_F_EXCL) {
-				ret = -EEXIST;
-				goto err;
-			}
-			helper = cur;
-			break;
-		}
+		helper = cur;
+		break;
 	}
-	rcu_read_unlock();
 
 	if (helper == NULL)
 		ret = nfnl_cthelper_create(tb, &tuple);
@@ -422,9 +424,6 @@ nfnl_cthelper_new(struct sock *nfnl, str
 		ret = nfnl_cthelper_update(tb, helper);
 
 	return ret;
-err:
-	rcu_read_unlock();
-	return ret;
 }
 
 static int
@@ -588,11 +587,12 @@ static int
 nfnl_cthelper_get(struct sock *nfnl, struct sk_buff *skb,
 		  const struct nlmsghdr *nlh, const struct nlattr * const tb[])
 {
-	int ret = -ENOENT, i;
+	int ret = -ENOENT;
 	struct nf_conntrack_helper *cur;
 	struct sk_buff *skb2;
 	char *helper_name = NULL;
 	struct nf_conntrack_tuple tuple;
+	struct nfnl_cthelper *nlcth;
 	bool tuple_set = false;
 
 	if (nlh->nlmsg_flags & NLM_F_DUMP) {
@@ -613,45 +613,39 @@ nfnl_cthelper_get(struct sock *nfnl, str
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_rcu(cur, &nf_ct_helper_hash[i], hnode) {
-
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
-
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
-
-			skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
-			if (skb2 == NULL) {
-				ret = -ENOMEM;
-				break;
-			}
+	list_for_each_entry(nlcth, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
+
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
+
+		skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+		if (skb2 == NULL) {
+			ret = -ENOMEM;
+			break;
+		}
 
-			ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
-						nlh->nlmsg_seq,
-						NFNL_MSG_TYPE(nlh->nlmsg_type),
-						NFNL_MSG_CTHELPER_NEW, cur);
-			if (ret <= 0) {
-				kfree_skb(skb2);
-				break;
-			}
+		ret = nfnl_cthelper_fill_info(skb2, NETLINK_CB(skb).portid,
+					      nlh->nlmsg_seq,
+					      NFNL_MSG_TYPE(nlh->nlmsg_type),
+					      NFNL_MSG_CTHELPER_NEW, cur);
+		if (ret <= 0) {
+			kfree_skb(skb2);
+			break;
+		}
 
-			ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
-						MSG_DONTWAIT);
-			if (ret > 0)
-				ret = 0;
+		ret = netlink_unicast(nfnl, skb2, NETLINK_CB(skb).portid,
+				      MSG_DONTWAIT);
+		if (ret > 0)
+			ret = 0;
 
-			/* this avoids a loop in nfnetlink. */
-			return ret == -EAGAIN ? -ENOBUFS : ret;
-		}
+		/* this avoids a loop in nfnetlink. */
+		return ret == -EAGAIN ? -ENOBUFS : ret;
 	}
 	return ret;
 }
@@ -662,10 +656,10 @@ nfnl_cthelper_del(struct sock *nfnl, str
 {
 	char *helper_name = NULL;
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
 	struct nf_conntrack_tuple tuple;
 	bool tuple_set = false, found = false;
-	int i, j = 0, ret;
+	struct nfnl_cthelper *nlcth, *n;
+	int j = 0, ret;
 
 	if (tb[NFCTH_NAME])
 		helper_name = nla_data(tb[NFCTH_NAME]);
@@ -678,30 +672,27 @@ nfnl_cthelper_del(struct sock *nfnl, str
 		tuple_set = true;
 	}
 
-	for (i = 0; i < nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-								hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
-
-			j++;
-
-			if (helper_name && strncmp(cur->name, helper_name,
-						NF_CT_HELPER_NAME_LEN) != 0) {
-				continue;
-			}
-			if (tuple_set &&
-			    (tuple.src.l3num != cur->tuple.src.l3num ||
-			     tuple.dst.protonum != cur->tuple.dst.protonum))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
+		j++;
+
+		if (helper_name &&
+		    strncmp(cur->name, helper_name, NF_CT_HELPER_NAME_LEN))
+			continue;
+
+		if (tuple_set &&
+		    (tuple.src.l3num != cur->tuple.src.l3num ||
+		     tuple.dst.protonum != cur->tuple.dst.protonum))
+			continue;
+
+		found = true;
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
 
-			found = true;
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		list_del(&nlcth->list);
+		kfree(nlcth);
 	}
+
 	/* Make sure we return success if we flush and there is no helpers */
 	return (found || j == 0) ? 0 : -ENOENT;
 }
@@ -750,22 +741,16 @@ err_out:
 static void __exit nfnl_cthelper_exit(void)
 {
 	struct nf_conntrack_helper *cur;
-	struct hlist_node *tmp;
-	int i;
+	struct nfnl_cthelper *nlcth, *n;
 
 	nfnetlink_subsys_unregister(&nfnl_cthelper_subsys);
 
-	for (i=0; i<nf_ct_helper_hsize; i++) {
-		hlist_for_each_entry_safe(cur, tmp, &nf_ct_helper_hash[i],
-									hnode) {
-			/* skip non-userspace conntrack helpers. */
-			if (!(cur->flags & NF_CT_HELPER_F_USERSPACE))
-				continue;
+	list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
+		cur = &nlcth->helper;
 
-			nf_conntrack_helper_unregister(cur);
-			kfree(cur->expect_policy);
-			kfree(cur);
-		}
+		nf_conntrack_helper_unregister(cur);
+		kfree(cur->expect_policy);
+		kfree(nlcth);
 	}
 }
 

[PATCH 4.4 47/78] netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao Feng <fgao@ikuai8.com>


[ Upstream commit 75c689dca98851d65ef5a27e5ce26b625b68751c ]

In the commit 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp
helper"), the snmp_helper is replaced by nf_nat_snmp_hook. So the
snmp_helper is never registered. But it still tries to unregister the
snmp_helper, it could cause the panic.

Now remove the useless snmp_helper and the unregister call in the
error handler.

Fixes: 93557f53e1fb ("netfilter: nf_conntrack: nf_conntrack snmp helper")
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/netfilter/nf_nat_snmp_basic.c |   19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -1260,16 +1260,6 @@ static const struct nf_conntrack_expect_
 	.timeout	= 180,
 };
 
-static struct nf_conntrack_helper snmp_helper __read_mostly = {
-	.me			= THIS_MODULE,
-	.help			= help,
-	.expect_policy		= &snmp_exp_policy,
-	.name			= "snmp",
-	.tuple.src.l3num	= AF_INET,
-	.tuple.src.u.udp.port	= cpu_to_be16(SNMP_PORT),
-	.tuple.dst.protonum	= IPPROTO_UDP,
-};
-
 static struct nf_conntrack_helper snmp_trap_helper __read_mostly = {
 	.me			= THIS_MODULE,
 	.help			= help,
@@ -1288,17 +1278,10 @@ static struct nf_conntrack_helper snmp_t
 
 static int __init nf_nat_snmp_basic_init(void)
 {
-	int ret = 0;
-
 	BUG_ON(nf_nat_snmp_hook != NULL);
 	RCU_INIT_POINTER(nf_nat_snmp_hook, help);
 
-	ret = nf_conntrack_helper_register(&snmp_trap_helper);
-	if (ret < 0) {
-		nf_conntrack_helper_unregister(&snmp_helper);
-		return ret;
-	}
-	return ret;
+	return nf_conntrack_helper_register(&snmp_trap_helper);
 }
 
 static void __exit nf_nat_snmp_basic_fini(void)

[PATCH 4.4 48/78] ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Reizer, Eyal" <eyalr@ti.com>


[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/am335x-evmsk.dts |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -668,6 +668,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 

[PATCH 4.4 49/78] KVM: pci-assign: do not map smm memory slot pages in vt-d page tables

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Herongguang (Stephen)" <herongguang.he@huawei.com>


[ Upstream commit 0292e169b2d9c8377a168778f0b16eadb1f578fd ]

or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.

This is consistent with current vfio implementation.

Signed-off-by: herongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 virt/kvm/kvm_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -986,7 +986,7 @@ int __kvm_set_memory_region(struct kvm *
 	 * changes) is disallowed above, so any other attribute changes getting
 	 * here can be skipped.
 	 */
-	if ((change == KVM_MR_CREATE) || (change == KVM_MR_MOVE)) {
+	if (as_id == 0 && (change == KVM_MR_CREATE || change == KVM_MR_MOVE)) {
 		r = kvm_iommu_map_pages(kvm, &new);
 		return r;
 	}

[PATCH 4.4 50/78] isdn: kcapi: avoid uninitialized data

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit af109a2cf6a9a6271fa420ae2d64d72d86c92b7d ]

gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/capi/kcapi.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -1032,6 +1032,7 @@ static int old_capi_manufacturer(unsigne
 						     sizeof(avmb1_carddef))))
 				return -EFAULT;
 			cdef.cardtype = AVM_CARDTYPE_B1;
+			cdef.cardnr = 0;
 		} else {
 			if ((retval = copy_from_user(&cdef, data,
 						     sizeof(avmb1_extcarddef))))

[PATCH 4.4 51/78] xhci: plat: Register shutdown for xhci_plat

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Wallis <awallis@codeaurora.org>


[ Upstream commit b07c12517f2aed0add8ce18146bb426b14099392 ]

Shutdown should be called for xhci_plat devices especially for
situations where kexec might be used by stopping DMA
transactions.

Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-plat.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -284,6 +284,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,

[PATCH 4.4 52/78] netfilter: nfnetlink_queue: fix secctx memory leak

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liping Zhang <zlpnobody@gmail.com>


[ Upstream commit 77c1c03c5b8ef28e55bb0aff29b1e006037ca645 ]

We must call security_release_secctx to free the memory returned by
security_secid_to_secctx, otherwise memory may be leaked forever.

Fixes: ef493bd930ae ("netfilter: nfnetlink_queue: add security context information")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nfnetlink_queue.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -390,7 +390,7 @@ nfqnl_build_packet_message(struct net *n
 				  GFP_ATOMIC);
 	if (!skb) {
 		skb_tx_error(entskb);
-		return NULL;
+		goto nlmsg_failure;
 	}
 
 	nlh = nlmsg_put(skb, 0, 0,
@@ -399,7 +399,7 @@ nfqnl_build_packet_message(struct net *n
 	if (!nlh) {
 		skb_tx_error(entskb);
 		kfree_skb(skb);
-		return NULL;
+		goto nlmsg_failure;
 	}
 	nfmsg = nlmsg_data(nlh);
 	nfmsg->nfgen_family = entry->state.pf;
@@ -542,12 +542,17 @@ nfqnl_build_packet_message(struct net *n
 	}
 
 	nlh->nlmsg_len = skb->len;
+	if (seclen)
+		security_release_secctx(secdata, seclen);
 	return skb;
 
 nla_put_failure:
 	skb_tx_error(entskb);
 	kfree_skb(skb);
 	net_err_ratelimited("nf_queue: error creating packet message\n");
+nlmsg_failure:
+	if (seclen)
+		security_release_secctx(secdata, seclen);
 	return NULL;
 }
 

[PATCH 4.4 53/78] ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>


[ Upstream commit 916a008b4b8ecc02fbd035cfb133773dba1ff3d7 ]

dma_get_sgtable() tries to create a scatterlist table containing valid
struct page pointers for the coherent memory allocation passed in to it.

However, memory can be declared via dma_declare_coherent_memory(), or
via other reservation schemes which means that coherent memory is not
guaranteed to be backed by struct pages.  In such cases, the resulting
scatterlist table contains pointers to invalid pages, which causes
kernel oops later.

This patch adds detection of such memory, and refuses to create a
scatterlist table for such memory.

Reported-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mm/dma-mapping.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -774,13 +774,31 @@ static void arm_coherent_dma_free(struct
 	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
 }
 
+/*
+ * The whole dma_get_sgtable() idea is fundamentally unsafe - it seems
+ * that the intention is to allow exporting memory allocated via the
+ * coherent DMA APIs through the dma_buf API, which only accepts a
+ * scattertable.  This presents a couple of problems:
+ * 1. Not all memory allocated via the coherent DMA APIs is backed by
+ *    a struct page
+ * 2. Passing coherent DMA memory into the streaming APIs is not allowed
+ *    as we will try to flush the memory through a different alias to that
+ *    actually being used (and the flushes are redundant.)
+ */
 int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
 		 void *cpu_addr, dma_addr_t handle, size_t size,
 		 struct dma_attrs *attrs)
 {
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+	unsigned long pfn = dma_to_pfn(dev, handle);
+	struct page *page;
 	int ret;
 
+	/* If the PFN is not valid, we do not have a struct page */
+	if (!pfn_valid(pfn))
+		return -ENXIO;
+
+	page = pfn_to_page(pfn);
+
 	ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
 	if (unlikely(ret))
 		return ret;

[PATCH 4.4 54/78] cpuidle: powernv: Pass correct drv->cpumask for registration

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>


[ Upstream commit 293d264f13cbde328d5477f49e3103edbc1dc191 ]

drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS.  When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.

This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.

Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:

cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
    pc: c00000000022c8bc: string+0x34/0x60
    lr: c00000000022ed78: vsnprintf+0x284/0x42c
    sp: c000000ff1503710
   msr: 9000000000009033
   dar: 6000000060000000
  current = 0xc000000ff1480000
  paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/8
Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
(Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
enter ? for help
[link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
[c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
[c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
[c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
[c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
[c000000ff15038c0] c000000000619694 printk+0x38/0x4c
[c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
[c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
[c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
[c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
[c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
[c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
[c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
[c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
[c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
[c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
[c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78

This patch fixes the bug by passing correct cpumask from
powernv-cpuidle driver.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpuidle/cpuidle-powernv.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -160,6 +160,24 @@ static int powernv_cpuidle_driver_init(v
 		drv->state_count += 1;
 	}
 
+	/*
+	 * On the PowerNV platform cpu_present may be less than cpu_possible in
+	 * cases when firmware detects the CPU, but it is not available to the
+	 * OS.  If CONFIG_HOTPLUG_CPU=n, then such CPUs are not hotplugable at
+	 * run time and hence cpu_devices are not created for those CPUs by the
+	 * generic topology_init().
+	 *
+	 * drv->cpumask defaults to cpu_possible_mask in
+	 * __cpuidle_driver_init().  This breaks cpuidle on PowerNV where
+	 * cpu_devices are not created for CPUs in cpu_possible_mask that
+	 * cannot be hot-added later at run time.
+	 *
+	 * Trying cpuidle_register_device() on a CPU without a cpu_device is
+	 * incorrect, so pass a correct CPU mask to the generic cpuidle driver.
+	 */
+
+	drv->cpumask = (struct cpumask *)cpu_present_mask;
+
 	return 0;
 }
 

[PATCH 4.4 55/78] bnxt_en: Fix NULL pointer dereference in reopen failure path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sankar Patchineelam <sankar.patchineelam@broadcom.com>


[ Upstream commit 2247925f0942dc4e7c09b1cde45ca18461d94c5f ]

Net device reset can fail when the h/w or f/w is in a bad state.
Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc().
The cleanup invokes bnxt_hwrm_resource_free() which inturn
calls bnxt_disable_int().  In this routine, the code segment

if (ring->fw_ring_id != INVALID_HW_RING_ID)
   BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons);

results in NULL pointer dereference as cpr->cp_doorbell is not yet
initialized, and fw_ring_id is zero.

The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before
bnxt_init_chip() is invoked.

Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -2014,6 +2014,18 @@ static int bnxt_init_one_rx_ring(struct
 	return 0;
 }
 
+static void bnxt_init_cp_rings(struct bnxt *bp)
+{
+	int i;
+
+	for (i = 0; i < bp->cp_nr_rings; i++) {
+		struct bnxt_cp_ring_info *cpr = &bp->bnapi[i]->cp_ring;
+		struct bnxt_ring_struct *ring = &cpr->cp_ring_struct;
+
+		ring->fw_ring_id = INVALID_HW_RING_ID;
+	}
+}
+
 static int bnxt_init_rx_rings(struct bnxt *bp)
 {
 	int i, rc = 0;
@@ -3977,6 +3989,7 @@ static int bnxt_shutdown_nic(struct bnxt
 
 static int bnxt_init_nic(struct bnxt *bp, bool irq_re_init)
 {
+	bnxt_init_cp_rings(bp);
 	bnxt_init_rx_rings(bp);
 	bnxt_init_tx_rings(bp);
 	bnxt_init_ring_grps(bp, irq_re_init);

[PATCH 4.4 56/78] backlight: pwm_bl: Fix overflow condition

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Derek Basehore <dbasehore@chromium.org>


[ Upstream commit 5d0c49acebc9488e37db95f1d4a55644e545ffe7 ]

This fixes an overflow condition that can happen with high max
brightness and period values in compute_duty_cycle. This fixes it by
using a 64 bit variable for computing the duty cycle.

Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/backlight/pwm_bl.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -79,14 +79,17 @@ static void pwm_backlight_power_off(stru
 static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
 {
 	unsigned int lth = pb->lth_brightness;
-	int duty_cycle;
+	u64 duty_cycle;
 
 	if (pb->levels)
 		duty_cycle = pb->levels[brightness];
 	else
 		duty_cycle = brightness;
 
-	return (duty_cycle * (pb->period - lth) / pb->scale) + lth;
+	duty_cycle *= pb->period - lth;
+	do_div(duty_cycle, pb->scale);
+
+	return duty_cycle + lth;
 }
 
 static int pwm_backlight_update_status(struct backlight_device *bl)

[PATCH 4.4 57/78] crypto: crypto4xx - increase context and scatter ring buffer elements

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@gmail.com>


[ Upstream commit 778f81d6cdb7d25360f082ac0384d5103f04eca5 ]

If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.

On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)

/dev/mapper/swap_crypt:
 Timing buffered disk reads:  14 MB in  3.68 seconds =   3.81 MB/sec

The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:

/dev/mapper/swap_crypt:
 Timing buffered disk reads: 104 MB in  3.03 seconds =  34.31 MB/sec

Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/amcc/crypto4xx_core.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/crypto/amcc/crypto4xx_core.h
+++ b/drivers/crypto/amcc/crypto4xx_core.h
@@ -32,12 +32,12 @@
 #define PPC405EX_CE_RESET                       0x00000008
 
 #define CRYPTO4XX_CRYPTO_PRIORITY		300
-#define PPC4XX_LAST_PD				63
-#define PPC4XX_NUM_PD				64
-#define PPC4XX_LAST_GD				1023
+#define PPC4XX_NUM_PD				256
+#define PPC4XX_LAST_PD				(PPC4XX_NUM_PD - 1)
 #define PPC4XX_NUM_GD				1024
-#define PPC4XX_LAST_SD				63
-#define PPC4XX_NUM_SD				64
+#define PPC4XX_LAST_GD				(PPC4XX_NUM_GD - 1)
+#define PPC4XX_NUM_SD				256
+#define PPC4XX_LAST_SD				(PPC4XX_NUM_SD - 1)
 #define PPC4XX_SD_BUFFER_SIZE			2048
 
 #define PD_ENTRY_INUSE				1

[PATCH 4.4 58/78] rtc: pl031: make interrupt optional

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>


[ Upstream commit 5b64a2965dfdfca8039e93303c64e2b15c19ff0c ]

On some platforms, the interrupt for the PL031 is optional.  Avoid
trying to claim the interrupt if it's not specified.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-pl031.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -308,7 +308,8 @@ static int pl031_remove(struct amba_devi
 
 	dev_pm_clear_wake_irq(&adev->dev);
 	device_init_wakeup(&adev->dev, false);
-	free_irq(adev->irq[0], ldata);
+	if (adev->irq[0])
+		free_irq(adev->irq[0], ldata);
 	rtc_device_unregister(ldata->rtc);
 	iounmap(ldata->base);
 	kfree(ldata);
@@ -381,12 +382,13 @@ static int pl031_probe(struct amba_devic
 		goto out_no_rtc;
 	}
 
-	if (request_irq(adev->irq[0], pl031_interrupt,
-			vendor->irqflags, "rtc-pl031", ldata)) {
-		ret = -EIO;
-		goto out_no_irq;
+	if (adev->irq[0]) {
+		ret = request_irq(adev->irq[0], pl031_interrupt,
+				  vendor->irqflags, "rtc-pl031", ldata);
+		if (ret)
+			goto out_no_irq;
+		dev_pm_set_wake_irq(&adev->dev, adev->irq[0]);
 	}
-	dev_pm_set_wake_irq(&adev->dev, adev->irq[0]);
 	return 0;
 
 out_no_irq:

[PATCH 4.4 59/78] net: phy: at803x: Change error to EINVAL for invalid MAC

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Murphy <dmurphy@ti.com>


[ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ]

Change the return error code to EINVAL if the MAC
address is not valid in the set_wol function.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/at803x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -105,7 +105,7 @@ static int at803x_set_wol(struct phy_dev
 		mac = (const u8 *) ndev->dev_addr;
 
 		if (!is_valid_ether_addr(mac))
-			return -EFAULT;
+			return -EINVAL;
 
 		for (i = 0; i < 3; i++) {
 			phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,

[PATCH 4.4 60/78] PCI: Avoid bus reset if bridge itself is broken

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Daney <david.daney@cavium.com>


[ Upstream commit 357027786f3523d26f42391aa4c075b8495e5d28 ]

When checking to see if a PCI bus can safely be reset, we previously
checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET
flag set.  Children marked with that flag are known not to behave well
after a bus reset.

Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.

Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device
to allow these bridges to be flagged, and prevent their secondary buses
from being reset.

Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3850,6 +3850,10 @@ static bool pci_bus_resetable(struct pci
 {
 	struct pci_dev *dev;
 
+
+	if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET))
+		return false;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
 		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))

[PATCH 4.4 61/78] scsi: cxgb4i: fix Tx skb leak

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Varun Prakash <varun@chelsio.com>


[ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ]

In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1339,6 +1339,7 @@ static void release_offload_resources(st
 		csk, csk->state, csk->flags, csk->tid);
 
 	cxgbi_sock_free_cpl_skbs(csk);
+	cxgbi_sock_purge_write_queue(csk);
 	if (csk->wr_cred != csk->wr_max_cred) {
 		cxgbi_sock_purge_wr_queue(csk);
 		cxgbi_sock_reset_wr_list(csk);

[PATCH 4.4 62/78] scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>


[ Upstream commit 2ce9a3645299ba1752873d333d73f67620f4550b ]

Whenever an I/O for a RAID volume fails with IOCStatus
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED and SCSIStatus equal to
(MPI2_SCSI_STATE_TERMINATED | MPI2_SCSI_STATE_NO_SCSI_STATUS) then
return the I/O to SCSI midlayer with "DID_RESET" (i.e. retry the IO
infinite times) set in the host byte.

Previously, the driver was completing the I/O with "DID_SOFT_ERROR"
which causes the I/O to be quickly retried. However, firmware needed
more time and hence I/Os were failing.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4588,6 +4588,11 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *i
 		} else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
 			scmd->result = DID_RESET << 16;
 			break;
+		} else if ((scmd->device->channel == RAID_CHANNEL) &&
+		   (scsi_state == (MPI2_SCSI_STATE_TERMINATED |
+		   MPI2_SCSI_STATE_NO_SCSI_STATUS))) {
+			scmd->result = DID_RESET << 16;
+			break;
 		}
 		scmd->result = DID_SOFT_ERROR << 16;
 		break;

[PATCH 4.4 63/78] PCI: Create SR-IOV virtfn/physfn links before attaching driver

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stuart Hayes <stuart.w.hayes@gmail.com>


[ Upstream commit 27d6162944b9b34c32cd5841acd21786637ee743 ]

When creating virtual functions, create the "virtfn%u" and "physfn" links
in sysfs *before* attaching the driver instead of after.  When we attach
the driver to the new virtual network interface first, there is a race when
the driver attaches to the new sends out an "add" udev event, and the
network interface naming software (biosdevname or systemd, for example)
tries to look at these links.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/iov.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -161,7 +161,6 @@ static int virtfn_add(struct pci_dev *de
 	pci_device_add(virtfn, virtfn->bus);
 	mutex_unlock(&iov->dev->sriov->lock);
 
-	pci_bus_add_device(virtfn);
 	sprintf(buf, "virtfn%u", id);
 	rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf);
 	if (rc)
@@ -172,6 +171,8 @@ static int virtfn_add(struct pci_dev *de
 
 	kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE);
 
+	pci_bus_add_device(virtfn);
+
 	return 0;
 
 failed2:

[PATCH 4.4 64/78] igb: check memory allocation failure

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>


[ Upstream commit 18eb86362a52f0af933cc0fd5e37027317eb2d1c ]

Check memory allocation failures and return -ENOMEM in such cases, as
already done for other memory allocations in this function.

This avoids NULL pointers dereference.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com
Acked-by: PJ Waskiewicz <peter.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3005,6 +3005,8 @@ static int igb_sw_init(struct igb_adapte
 	/* Setup and initialize a copy of the hw vlan table array */
 	adapter->shadow_vfta = kcalloc(E1000_VLAN_FILTER_TBL_SIZE, sizeof(u32),
 				       GFP_ATOMIC);
+	if (!adapter->shadow_vfta)
+		return -ENOMEM;
 
 	/* This call may decrease the number of queues */
 	if (igb_init_interrupt_scheme(adapter, true)) {

[PATCH 4.4 65/78] ixgbe: fix use of uninitialized padding

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emil Tantilov <emil.s.tantilov@intel.com>


[ Upstream commit dcfd6b839c998bc9838e2a47f44f37afbdf3099c ]

This patch is resolving Coverity hits where padding in a structure could
be used uninitialized.

- Initialize fwd_cmd.pad/2 before ixgbe_calculate_checksum()

- Initialize buffer.pad2/3 before ixgbe_hic_unlocked()

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |    4 ++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c   |    2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3620,10 +3620,10 @@ s32 ixgbe_set_fw_drv_ver_generic(struct
 	fw_cmd.ver_build = build;
 	fw_cmd.ver_sub = sub;
 	fw_cmd.hdr.checksum = 0;
-	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
-				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
 	fw_cmd.pad = 0;
 	fw_cmd.pad2 = 0;
+	fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+				(FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
 
 	for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
 		ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -564,6 +564,8 @@ static s32 ixgbe_read_ee_hostif_buffer_X
 		/* convert offset from words to bytes */
 		buffer.address = cpu_to_be32((offset + current_word) * 2);
 		buffer.length = cpu_to_be16(words_to_read * 2);
+		buffer.pad2 = 0;
+		buffer.pad3 = 0;
 
 		status = ixgbe_host_interface_command(hw, (u32 *)&buffer,
 						      sizeof(buffer),

[PATCH 4.4 66/78] PCI/AER: Report non-fatal errors only to the affected endpoint

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabriele Paoloni <gabriele.paoloni@huawei.com>


[ Upstream commit 86acc790717fb60fb51ea3095084e331d8711c74 ]

Previously, if an non-fatal error was reported by an endpoint, we
called report_error_detected() for the endpoint, every sibling on the
bus, and their descendents.  If any of them did not implement the
.error_detected() method, do_recovery() failed, leaving all these
devices unrecovered.

For example, the system described in the bugzilla below has two devices:

  0000:74:02.0 [19e5:a230] SAS controller, driver has .error_detected()
  0000:74:03.0 [19e5:a235] SATA controller, driver lacks .error_detected()

When a device such as 74:02.0 reported a non-fatal error, do_recovery()
failed because 74:03.0 lacked an .error_detected() method.  But per PCIe
r3.1, sec 6.2.2.2.2, such an error does not compromise the Link and
does not affect 74:03.0:

  Non-fatal errors are uncorrectable errors which cause a particular
  transaction to be unreliable but the Link is otherwise fully functional.
  Isolating Non-fatal from Fatal errors provides Requester/Receiver logic
  in a device or system management software the opportunity to recover from
  the error without resetting the components on the Link and disturbing
  other transactions in progress.  Devices not associated with the
  transaction in error are not impacted by the error.

Report non-fatal errors only to the endpoint that reported them.  We really
want to check for AER_NONFATAL here, but the current code structure doesn't
allow that.  Looking for pci_channel_io_normal is the best we can do now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=197055
Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver")
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pcie/aer/aerdrv_core.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -388,7 +388,14 @@ static pci_ers_result_t broadcast_error_
 		 * If the error is reported by an end point, we think this
 		 * error is related to the upstream link of the end point.
 		 */
-		pci_walk_bus(dev->bus, cb, &result_data);
+		if (state == pci_channel_io_normal)
+			/*
+			 * the error is non fatal so the bus is ok, just invoke
+			 * the callback for the function that logged the error.
+			 */
+			cb(dev, &result_data);
+		else
+			pci_walk_bus(dev->bus, cb, &result_data);
 	}
 
 	return result_data.result;

[PATCH 4.4 67/78] scsi: lpfc: Fix secure firmware updates

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit 184fc2b9a8bcbda9c14d0a1e7fbecfc028c7702e ]

Firmware update fails with: status x17 add_status x56 on the final write

If multiple DMA buffers are used for the download, some firmware revs
have difficulty with signatures and crcs split across the dma buffer
boundaries.  Resolve by making all writes be a single 4k page in length.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hw4.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3180,7 +3180,7 @@ struct lpfc_mbx_get_port_name {
 #define MB_CEQ_STATUS_QUEUE_FLUSHING		0x4
 #define MB_CQE_STATUS_DMA_FAILED		0x5
 
-#define LPFC_MBX_WR_CONFIG_MAX_BDE		8
+#define LPFC_MBX_WR_CONFIG_MAX_BDE		1
 struct lpfc_mbx_wr_object {
 	struct mbox_header header;
 	union {

[PATCH 4.4 68/78] scsi: lpfc: PLOGI failures during NPIV testing

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dick Kennedy <dick.kennedy@broadcom.com>


[ Upstream commit e8bcf0ae4c0346fdc78ebefe0eefcaa6a6622d38 ]

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4777,7 +4777,8 @@ lpfc_nlp_remove(struct lpfc_vport *vport
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
 	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
 	    !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
-	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
+	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED) &&
+	    phba->sli_rev != LPFC_SLI_REV4) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */

[PATCH 4.4 69/78] fm10k: ensure we process SM mbx when processing VF mbx

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Keller <jacob.e.keller@intel.com>


[ Upstream commit 17a91809942ca32c70026d2d5ba3348a2c4fdf8f ]

When we process VF mailboxes, the driver is likely going to also queue
up messages to the switch manager. This process merely queues up the
FIFO, but doesn't actually begin the transmission process. Because we
hold the mailbox lock during this VF processing, the PF<->SM mailbox is
not getting processed at this time. Ensure that we actually process the
PF<->SM mailbox in between each PF<->VF mailbox.

This should ensure prompt transmission of the messages queued up after
each VF message is received and handled.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -126,6 +126,9 @@ process_mbx:
 		struct fm10k_mbx_info *mbx = &vf_info->mbx;
 		u16 glort = vf_info->glort;
 
+		/* process the SM mailbox first to drain outgoing messages */
+		hw->mbx.ops.process(hw, &hw->mbx);
+
 		/* verify port mapping is valid, if not reset port */
 		if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort))
 			hw->iov.ops.reset_lport(hw, vf_info);

[PATCH 4.4 70/78] tcp: fix under-evaluated ssthresh in TCP Vegas

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hoang Tran <tranviethoang.vn@gmail.com>


[ Upstream commit cf5d74b85ef40c202c76d90959db4d850f301b95 ]

With the commit 76174004a0f19785 (tcp: do not slow start when cwnd equals
ssthresh), the comparison to the reduced cwnd in tcp_vegas_ssthresh() would
under-evaluate the ssthresh.

Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_vegas.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -158,7 +158,7 @@ EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
 
 static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
 {
-	return  min(tp->snd_ssthresh, tp->snd_cwnd-1);
+	return  min(tp->snd_ssthresh, tp->snd_cwnd);
 }
 
 static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 acked)

[PATCH 4.4 71/78] rtc: set the alarm to the next expiring timer

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>


[ Upstream commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d ]

If there is any non expired timer in the queue, the RTC alarm is never set.
This is an issue when adding a timer that expires before the next non
expired timer.

Ensure the RTC alarm is set in that case.

Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/interface.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -764,7 +764,7 @@ static int rtc_timer_enqueue(struct rtc_
 	}
 
 	timerqueue_add(&rtc->timerqueue, &timer->node);
-	if (!next) {
+	if (!next || ktime_before(timer->node.expires, next->expires)) {
 		struct rtc_wkalrm alarm;
 		int err;
 		alarm.time = rtc_ktime_to_tm(timer->node.expires);

[PATCH 4.4 72/78] cpuidle: fix broadcast control when broadcast can not be entered

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Piggin <npiggin@gmail.com>


[ Upstream commit f187851b9b4a76952b1158b86434563dd2031103 ]

When failing to enter broadcast timer mode for an idle state that
requires it, a new state is selected that does not require broadcast,
but the broadcast variable remains set. This causes
tick_broadcast_exit to be called despite not having entered broadcast
mode.

This causes the WARN_ON_ONCE(!irqs_disabled()) to trigger in some
cases. It does not appear to cause problems for code today, but seems
to violate the interface so should be fixed.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpuidle/cpuidle.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -189,6 +189,7 @@ int cpuidle_enter_state(struct cpuidle_d
 			return -EBUSY;
 		}
 		target_state = &drv->states[index];
+		broadcast = false;
 	}
 
 	/* Take note of the planned idle state. */

[PATCH 4.4 73/78] thermal: hisilicon: Handle return value of clk_prepare_enable

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>

commit 919054fdfc8adf58c5512fe9872eb53ea0f5525d upstream.

clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/thermal/hisi_thermal.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -389,8 +389,11 @@ static int hisi_thermal_suspend(struct d
 static int hisi_thermal_resume(struct device *dev)
 {
 	struct hisi_thermal_data *data = dev_get_drvdata(dev);
+	int ret;
 
-	clk_prepare_enable(data->clk);
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
 
 	data->irq_enabled = true;
 	hisi_thermal_enable_bind_irq_sensor(data);

[PATCH 4.4 74/78] MIPS: math-emu: Fix final emulation phase for certain instructions

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksandar Markovic <aleksandar.markovic@mips.com>

commit 409fcace9963c1e8d2cb0f7ac62e8b34d47ef979 upstream.

Fix final phase of <CLASS|MADDF|MSUBF|MAX|MIN|MAXA|MINA>.<D|S>
emulation. Provide proper generation of SIGFPE signal and updating
debugfs FP exception stats in cases of any exception flags set in
preceding phases of emulation.

CLASS.<D|S> instruction may generate "Unimplemented Operation" FP
exception. <MADDF|MSUBF>.<D|S> instructions may generate "Inexact",
"Unimplemented Operation", "Invalid Operation", "Overflow", and
"Underflow" FP exceptions. <MAX|MIN|MAXA|MINA>.<D|S> instructions
can generate "Unimplemented Operation" and "Invalid Operation" FP
exceptions.

The proper final processing of the cases when any FP exception
flag is set is achieved by replacing "break" statement with "goto
copcsr" statement. With such solution, this patch brings the final
phase of emulation of the above instructions consistent with the
one corresponding to the previously implemented emulation of other
related FPU instructions (ADD, SUB, etc.).

Fixes: 38db37ba069f ("MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction")
Fixes: e24c3bec3e8e ("MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction")
Fixes: 83d43305a1df ("MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction")
Fixes: a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes: 4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Douglas Leung <douglas.leung@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petar Jovanovic <petar.jovanovic@mips.com>
Cc: Raghu Gandham <raghu.gandham@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17581/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/math-emu/cp1emu.c |   28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1777,7 +1777,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			SPFROMREG(fd, MIPSInst_FD(ir));
 			rv.s = ieee754sp_maddf(fd, fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmsubf_op: {
@@ -1790,7 +1790,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			SPFROMREG(fd, MIPSInst_FD(ir));
 			rv.s = ieee754sp_msubf(fd, fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case frint_op: {
@@ -1814,7 +1814,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.w = ieee754sp_2008class(fs);
 			rfmt = w_fmt;
-			break;
+			goto copcsr;
 		}
 
 		case fmin_op: {
@@ -1826,7 +1826,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(ft, MIPSInst_FT(ir));
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.s = ieee754sp_fmin(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmina_op: {
@@ -1838,7 +1838,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(ft, MIPSInst_FT(ir));
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.s = ieee754sp_fmina(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmax_op: {
@@ -1850,7 +1850,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(ft, MIPSInst_FT(ir));
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.s = ieee754sp_fmax(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmaxa_op: {
@@ -1862,7 +1862,7 @@ static int fpu_emu(struct pt_regs *xcp,
 			SPFROMREG(ft, MIPSInst_FT(ir));
 			SPFROMREG(fs, MIPSInst_FS(ir));
 			rv.s = ieee754sp_fmaxa(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fabs_op:
@@ -2095,7 +2095,7 @@ copcsr:
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			DPFROMREG(fd, MIPSInst_FD(ir));
 			rv.d = ieee754dp_maddf(fd, fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmsubf_op: {
@@ -2108,7 +2108,7 @@ copcsr:
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			DPFROMREG(fd, MIPSInst_FD(ir));
 			rv.d = ieee754dp_msubf(fd, fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case frint_op: {
@@ -2132,7 +2132,7 @@ copcsr:
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			rv.w = ieee754dp_2008class(fs);
 			rfmt = w_fmt;
-			break;
+			goto copcsr;
 		}
 
 		case fmin_op: {
@@ -2144,7 +2144,7 @@ copcsr:
 			DPFROMREG(ft, MIPSInst_FT(ir));
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fmin(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmina_op: {
@@ -2156,7 +2156,7 @@ copcsr:
 			DPFROMREG(ft, MIPSInst_FT(ir));
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fmina(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmax_op: {
@@ -2168,7 +2168,7 @@ copcsr:
 			DPFROMREG(ft, MIPSInst_FT(ir));
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fmax(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fmaxa_op: {
@@ -2180,7 +2180,7 @@ copcsr:
 			DPFROMREG(ft, MIPSInst_FT(ir));
 			DPFROMREG(fs, MIPSInst_FS(ir));
 			rv.d = ieee754dp_fmaxa(fs, ft);
-			break;
+			goto copcsr;
 		}
 
 		case fabs_op:

[PATCH 4.4 75/78] Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ffc7565746bb2fc063fc0f484c55ef6d8951a6ee which is
commit a0085f2510e8976614ad8f766b209448b385492f upstream.

It causes problems with working systems, as noted by a number of the
ChromeOS developers.

Cc: Sukumar Ghorai <sukumar.ghorai@intel.com>
Cc: Amit K Bag <amit.k.bag@intel.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1050,10 +1050,6 @@ static int btusb_open(struct hci_dev *hd
 		return err;
 
 	data->intf->needs_remote_wakeup = 1;
-	/* device specific wakeup source enabled and required for USB
-	 * remote wakeup while host is suspended
-	 */
-	device_wakeup_enable(&data->udev->dev);
 
 	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
 		goto done;
@@ -1117,7 +1113,6 @@ static int btusb_close(struct hci_dev *h
 		goto failed;
 
 	data->intf->needs_remote_wakeup = 0;
-	device_wakeup_disable(&data->udev->dev);
 	usb_autopm_put_interface(data->intf);
 
 failed:

[PATCH 4.4 76/78] ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit faafd03d23c913633d2ef7e6ffebdce01b164409 upstream.

The commit [d745f5e7b8b2: ALSA: hda - Add the pin / port mapping on
Intel ILK and VLV] introduced a WARN_ON() to check the pointer for
avoiding the double initializations.  But hdac_acomp pointer wasn't
cleared at snd_hdac_i915_exit(), thus after reloading the HD-audio
driver, it may result in the false positive warning.  This patch makes
sure to clear the leftover pointer at exit.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736
Reported-by: Daniela Doras-prodan <daniela.doras-prodan@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/hda/hdac_i915.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -273,6 +273,7 @@ int snd_hdac_i915_exit(struct hdac_bus *
 
 	kfree(acomp);
 	bus->audio_component = NULL;
+	hdac_acomp = NULL;
 
 	return 0;
 }

[PATCH 4.4 77/78] ALSA: hda - Degrade i915 binding failure message

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit bed2e98e1f4db8b827df507abc30be7b11b0613d upstream.

Currently HD-audio driver on Intel Skylake or Broxteon gives an error
message when binding with i915 audio component fails.  However, this
isn't any serious error on a system without Intel graphics.  Indeed
there are such systems, where a third-party codec (e.g. Creative) is
put on the mobo while using other discrete GPU (e.g. Nvidia).
Printing a kernel "error" message is overreaction in such a case.

This patch downgrades the print level for that message.  For systems
that mandate the i915 binding (e.g. Haswell or Broadwell HDMI/DP),
another kernel error message is shown in addition to make clear what
went wrong.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111021
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/hda/hdac_i915.c     |    2 +-
 sound/pci/hda/hda_intel.c |    6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -240,7 +240,7 @@ out_master_del:
 out_err:
 	kfree(acomp);
 	bus->audio_component = NULL;
-	dev_err(dev, "failed to add i915 component master (%d)\n", ret);
+	dev_info(dev, "failed to add i915 component master (%d)\n", ret);
 
 	return ret;
 }
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2088,9 +2088,11 @@ static int azx_probe_continue(struct azx
 			 * for other chips, still continue probing as other
 			 * codecs can be on the same link.
 			 */
-			if (CONTROLLER_IN_GPU(pci))
+			if (CONTROLLER_IN_GPU(pci)) {
+				dev_err(chip->card->dev,
+					"HSW/BDW HD-audio HDMI/DP requires binding with gfx driver\n");
 				goto out_free;
-			else
+			} else
 				goto skip_i915;
 		}
 

[PATCH 4.4 78/78] ALSA: hda - Fix yet another i915 pointer leftover in error path

[Greg Kroah-Hartman]

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 97cc2ed27e5a168cf423f67c3bc7c6cc41d12f82 upstream.

The hdac_acomp object in hdac_i915.c is left as assigned even after
binding with i915 actually fails, and this leads to the WARN_ON() at
the next load of the module.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94736
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/hda/hdac_i915.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/hda/hdac_i915.c
+++ b/sound/hda/hdac_i915.c
@@ -240,6 +240,7 @@ out_master_del:
 out_err:
 	kfree(acomp);
 	bus->audio_component = NULL;
+	hdac_acomp = NULL;
 	dev_info(dev, "failed to add i915 component master (%d)\n", ret);
 
 	return ret;

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Nathan Chancellor]

On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.108 release.
> There are 78 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.108-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 4.4.108-rc1
> 
> Takashi Iwai <tiwai@suse.de>
>     ALSA: hda - Fix yet another i915 pointer leftover in error path
> 
> Takashi Iwai <tiwai@suse.de>
>     ALSA: hda - Degrade i915 binding failure message
> 
> Takashi Iwai <tiwai@suse.de>
>     ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"
> 
> Aleksandar Markovic <aleksandar.markovic@mips.com>
>     MIPS: math-emu: Fix final emulation phase for certain instructions
> 
> Arvind Yadav <arvind.yadav.cs@gmail.com>
>     thermal: hisilicon: Handle return value of clk_prepare_enable
> 
> Nicholas Piggin <npiggin@gmail.com>
>     cpuidle: fix broadcast control when broadcast can not be entered
> 
> Alexandre Belloni <alexandre.belloni@free-electrons.com>
>     rtc: set the alarm to the next expiring timer
> 
> Hoang Tran <tranviethoang.vn@gmail.com>
>     tcp: fix under-evaluated ssthresh in TCP Vegas
> 
> Jacob Keller <jacob.e.keller@intel.com>
>     fm10k: ensure we process SM mbx when processing VF mbx
> 
> Dick Kennedy <dick.kennedy@broadcom.com>
>     scsi: lpfc: PLOGI failures during NPIV testing
> 
> Dick Kennedy <dick.kennedy@broadcom.com>
>     scsi: lpfc: Fix secure firmware updates
> 
> Gabriele Paoloni <gabriele.paoloni@huawei.com>
>     PCI/AER: Report non-fatal errors only to the affected endpoint
> 
> Emil Tantilov <emil.s.tantilov@intel.com>
>     ixgbe: fix use of uninitialized padding
> 
> Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>     igb: check memory allocation failure
> 
> Stuart Hayes <stuart.w.hayes@gmail.com>
>     PCI: Create SR-IOV virtfn/physfn links before attaching driver
> 
> Sreekanth Reddy <sreekanth.reddy@broadcom.com>
>     scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive
> 
> Varun Prakash <varun@chelsio.com>
>     scsi: cxgb4i: fix Tx skb leak
> 
> David Daney <david.daney@cavium.com>
>     PCI: Avoid bus reset if bridge itself is broken
> 
> Dan Murphy <dmurphy@ti.com>
>     net: phy: at803x: Change error to EINVAL for invalid MAC
> 
> Russell King <rmk+kernel@armlinux.org.uk>
>     rtc: pl031: make interrupt optional
> 
> Christian Lamparter <chunkeey@gmail.com>
>     crypto: crypto4xx - increase context and scatter ring buffer elements
> 
> Derek Basehore <dbasehore@chromium.org>
>     backlight: pwm_bl: Fix overflow condition
> 
> Sankar Patchineelam <sankar.patchineelam@broadcom.com>
>     bnxt_en: Fix NULL pointer dereference in reopen failure path
> 
> Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
>     cpuidle: powernv: Pass correct drv->cpumask for registration
> 
> Russell King <rmk+kernel@armlinux.org.uk>
>     ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
> 
> Liping Zhang <zlpnobody@gmail.com>
>     netfilter: nfnetlink_queue: fix secctx memory leak
> 
> Adam Wallis <awallis@codeaurora.org>
>     xhci: plat: Register shutdown for xhci_plat
> 
> Arnd Bergmann <arnd@arndb.de>
>     isdn: kcapi: avoid uninitialized data
> 
> Herongguang (Stephen) <herongguang.he@huawei.com>
>     KVM: pci-assign: do not map smm memory slot pages in vt-d page tables
> 
> Reizer, Eyal <eyalr@ti.com>
>     ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
> 
> Gao Feng <fgao@ikuai8.com>
>     netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register
> 
> Liping Zhang <zlpnobody@gmail.com>
>     netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table
> 
> Alexey Khoroshilov <khoroshilov@ispras.ru>
>     irda: vlsi_ir: fix check for DMA mapping errors
> 
> Sagi Grimberg <sagi@grimberg.me>
>     RDMA/iser: Fix possible mr leak on device removal event
> 
> Alexander Duyck <alexander.h.duyck@intel.com>
>     i40e: Do not enable NAPI on q_vectors that have no rings
> 
> Alexander Duyck <alexander.h.duyck@intel.com>
>     net: Do not allow negative values for busy_read and busy_poll sysctl interfaces
> 
> Arnd Bergmann <arnd@arndb.de>
>     bna: avoid writing uninitialized data into hw registers
> 
> Julian Wiedmann <jwi@linux.vnet.ibm.com>
>     s390/qeth: no ETH header for outbound AF_IUCV
> 
> hayeswang <hayeswang@realtek.com>
>     r8152: prevent the driver from transmitting packets with carrier off
> 
> Peter Stein <peter@stuntstein.dk>
>     HID: xinmo: fix for out of range for THT 2P arcade controller.
> 
> Mike Looijmans <mike.looijmans@topic.nl>
>     i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
> 
> Arnd Bergmann <arnd@arndb.de>
>     hwmon: (asus_atk0110) fix uninitialized data access
> 
> Rob Herring <robh@kernel.org>
>     ARM: dts: ti: fix PCI bus dtc warnings
> 
> Wanpeng Li <wanpeng.li@hotmail.com>
>     KVM: VMX: Fix enable VPID conditions
> 
> Wanpeng Li <wanpeng.li@hotmail.com>
>     KVM: x86: correct async page present tracepoint
> 
> Dick Kennedy <dick.kennedy@broadcom.com>
>     scsi: lpfc: Fix PT2PT PRLI reject
> 
> Patrice Chotard <patrice.chotard@st.com>
>     pinctrl: st: add irq_request/release_resources callbacks
> 
> Eric Dumazet <edumazet@google.com>
>     inet: frag: release spinlock before calling icmp_send()
> 
> Jeffy Chen <jeffy.chen@rock-chips.com>
>     netfilter: nfnl_cthelper: Fix memory leak
> 
> Pablo Neira Ayuso <pablo@netfilter.org>
>     netfilter: nfnl_cthelper: fix runtime expectation policy updates
> 
> Gustavo A. R. Silva <garsilva@embeddedor.com>
>     usb: gadget: udc: remove pointer dereference after free
> 
> Roger Quadros <rogerq@ti.com>
>     usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
> 
> Tony Lindgren <tony@atomide.com>
>     net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
> 
> Dan Carpenter <dan.carpenter@oracle.com>
>     bna: integer overflow bug in debugfs
> 
> Eric Dumazet <edumazet@google.com>
>     sch_dsmark: fix invalid skb_cow() usage
> 
> Herbert Xu <herbert@gondor.apana.org.au>
>     crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex
> 
> hayeswang <hayeswang@realtek.com>
>     r8152: fix the list rx_done may be used without initialization
> 
> Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
>     cpuidle: Validate cpu_dev in cpuidle_add_sysfs()
> 
> Jon Medhurst <tixy@linaro.org>
>     arm: kprobes: Align stack to 8-bytes in test code
> 
> Masami Hiramatsu <mhiramat@kernel.org>
>     arm: kprobes: Fix the return address of multiple kretprobes
> 
> Jaroslav Kysela <perex@perex.cz>
>     ALSA: hda - add support for docking station for HP 840 G3
> 
> Jaroslav Kysela <perex@perex.cz>
>     ALSA: hda - add support for docking station for HP 820 G2
> 
> Aaron Lu <aaron.lu@intel.com>
>     x86/irq: Do not substract irq_tlb_count from irq_call_count
> 
> Andy Lutomirski <luto@kernel.org>
>     sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
> 
> Steven Rostedt <rostedt@goodmis.org>
>     ARM: Hide finish_arch_post_lock_switch() from modules
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm, sched/core: Turn off IRQs in switch_mm()
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm, sched/core: Uninline switch_mm()
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm: Build arch/x86/mm/tlb.c even on !SMP
> 
> Andy Lutomirski <luto@kernel.org>
>     sched/core: Add switch_mm_irqs_off() and use it in the scheduler
> 
> Ingo Molnar <mingo@kernel.org>
>     mm/mmu_context, sched/core: Fix mmu_context.h assumption
> 
> Nadav Amit <namit@vmware.com>
>     mm/rmap: batched invalidations should use existing api
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm: If INVPCID is available, use it to flush global mappings
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
> 
> Borislav Petkov <bp@suse.de>
>     x86/mm: Fix INVPCID asm constraint
> 
> Andy Lutomirski <luto@kernel.org>
>     x86/mm: Add INVPCID helpers
> 
> Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
>     cxl: Check if vphb exists before iterating over AFU devices
> 
> Steve Capper <steve.capper@arm.com>
>     arm64: Initialise high_memory global variable earlier
> 
> 
> -------------
> 
> Diffstat:
> 
>  Documentation/kernel-parameters.txt             |   2 +
>  Makefile                                        |   4 +-
>  arch/arm/boot/dts/am335x-evmsk.dts              |   1 +
>  arch/arm/boot/dts/dra7.dtsi                     |   2 +
>  arch/arm/include/asm/mmu_context.h              |   2 +
>  arch/arm/mm/dma-mapping.c                       |  20 +-
>  arch/arm/probes/kprobes/core.c                  |  24 ++-
>  arch/arm/probes/kprobes/test-core.c             |  11 +-
>  arch/arm64/mm/init.c                            |   2 +-
>  arch/mips/math-emu/cp1emu.c                     |  28 +--
>  arch/x86/include/asm/hardirq.h                  |   4 -
>  arch/x86/include/asm/mmu_context.h              | 101 +--------
>  arch/x86/include/asm/tlbflush.h                 |  63 +++++-
>  arch/x86/kernel/cpu/common.c                    |  16 ++
>  arch/x86/kernel/irq.c                           |   3 +-
>  arch/x86/kvm/vmx.c                              |   9 +-
>  arch/x86/kvm/x86.c                              |   2 +-
>  arch/x86/mm/Makefile                            |   3 +-
>  arch/x86/mm/tlb.c                               | 118 ++++++++++-
>  drivers/bluetooth/btusb.c                       |   5 -
>  drivers/cpuidle/cpuidle-powernv.c               |  18 ++
>  drivers/cpuidle/cpuidle.c                       |   1 +
>  drivers/cpuidle/sysfs.c                         |  12 ++
>  drivers/crypto/amcc/crypto4xx_core.h            |  10 +-
>  drivers/hid/hid-core.c                          |   1 +
>  drivers/hid/hid-ids.h                           |   1 +
>  drivers/hid/hid-xinmo.c                         |   1 +
>  drivers/hwmon/asus_atk0110.c                    |   3 +
>  drivers/i2c/muxes/i2c-mux-pca954x.c             |   6 +-
>  drivers/infiniband/ulp/iser/iscsi_iser.h        |   2 +
>  drivers/infiniband/ulp/iser/iser_verbs.c        |   8 +-
>  drivers/isdn/capi/kcapi.c                       |   1 +
>  drivers/misc/cxl/pci.c                          |  13 ++
>  drivers/net/ethernet/broadcom/bnxt/bnxt.c       |  13 ++
>  drivers/net/ethernet/brocade/bna/bfa_ioc.c      |  10 +-
>  drivers/net/ethernet/brocade/bna/bnad_debugfs.c |   2 +-
>  drivers/net/ethernet/intel/fm10k/fm10k_iov.c    |   3 +
>  drivers/net/ethernet/intel/i40e/i40e_main.c     |  16 +-
>  drivers/net/ethernet/intel/igb/igb_main.c       |   2 +
>  drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |   4 +-
>  drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c   |   2 +
>  drivers/net/irda/vlsi_ir.c                      |   8 +-
>  drivers/net/phy/at803x.c                        |   2 +-
>  drivers/net/usb/qmi_wwan.c                      |   4 +
>  drivers/net/usb/r8152.c                         |  19 +-
>  drivers/pci/iov.c                               |   3 +-
>  drivers/pci/pci.c                               |   4 +
>  drivers/pci/pcie/aer/aerdrv_core.c              |   9 +-
>  drivers/pinctrl/pinctrl-st.c                    |  30 ++-
>  drivers/rtc/interface.c                         |   2 +-
>  drivers/rtc/rtc-pl031.c                         |  14 +-
>  drivers/s390/net/qeth_l3_main.c                 |  15 +-
>  drivers/scsi/cxgbi/cxgb4i/cxgb4i.c              |   1 +
>  drivers/scsi/lpfc/lpfc_els.c                    |   3 +-
>  drivers/scsi/lpfc/lpfc_hbadisc.c                |   3 +-
>  drivers/scsi/lpfc/lpfc_hw4.h                    |   2 +-
>  drivers/scsi/mpt3sas/mpt3sas_scsih.c            |   5 +
>  drivers/thermal/hisi_thermal.c                  |   5 +-
>  drivers/usb/gadget/function/f_uvc.c             |   8 +
>  drivers/usb/gadget/udc/pch_udc.c                |   1 -
>  drivers/usb/host/xhci-plat.c                    |   1 +
>  drivers/video/backlight/pwm_bl.c                |   7 +-
>  include/linux/mmu_context.h                     |   7 +
>  kernel/sched/core.c                             |   4 +-
>  mm/mmu_context.c                                |   2 +-
>  mm/rmap.c                                       |  28 +--
>  net/core/sysctl_net_core.c                      |   6 +-
>  net/ipv4/ip_fragment.c                          |  25 ++-
>  net/ipv4/netfilter/nf_nat_snmp_basic.c          |  19 +-
>  net/ipv4/tcp_vegas.c                            |   2 +-
>  net/netfilter/nfnetlink_cthelper.c              | 267 +++++++++++++++---------
>  net/netfilter/nfnetlink_queue.c                 |   9 +-
>  net/netlink/af_netlink.c                        |  41 ++++
>  net/sched/sch_dsmark.c                          |  10 +-
>  sound/hda/hdac_i915.c                           |   4 +-
>  sound/pci/hda/hda_intel.c                       |   6 +-
>  sound/pci/hda/patch_conexant.c                  |  11 +
>  sound/pci/hda/patch_realtek.c                   |  14 +-
>  virt/kvm/kvm_main.c                             |   2 +-
>  79 files changed, 793 insertions(+), 359 deletions(-)
> 
>

Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.

No initial issues noticed in general usage or dmesg.

Cheers!
Nathan

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Fri, Dec 22, 2017 at 08:48:33AM -0700, Nathan Chancellor wrote:
> On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> 
> Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.
> 
> No initial issues noticed in general usage or dmesg.

Wonderful, thanks for testing and letting me know.

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Naresh Kamboju]

On 22 December 2017 at 14:15, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.4.108 release.
> There are 78 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.108-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.4.108-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 0989207de188be3aee29cea20120569f74e68866
git describe: v4.4.107-79-g0989207de188
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.107-79-g0989207de188


No regressions (compared to build v4.4.107-75-gaec393908c64)

Boards, architectures and test suites:
-------------------------------------

juno-r2 - arm64
* boot - pass: 20,
* kselftest - pass: 32, skip: 29
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 28, skip: 36
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 984, skip: 124
* ltp-timers-tests - pass: 12,

x15 - arm
* boot - pass: 20,
* kselftest - pass: 31, skip: 29
* libhugetlbfs - pass: 87, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1036, skip: 67
* ltp-timers-tests - pass: 12,

x86_64
* boot - pass: 20,
* kselftest - pass: 44, skip: 32
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 1
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 9, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1004, skip: 117
* ltp-timers-tests - pass: 12,

And the arm64 hikey results.

Summary
------------------------------------------------------------------------

kernel: 4.4.108-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git tag: 4.4.108-rc1-hikey-20171222-84
git commit: b8f2eb356f221e556c994ffa669f17b9ed885ecf
git describe: 4.4.108-rc1-hikey-20171222-84
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.108-rc1-hikey-20171222-84


No regressions (compared to build 4.4.108-rc1-hikey-20171221-83)

Boards, architectures and test suites:
-------------------------------------

hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 30, skip: 31
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 28, skip: 36
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 980, skip: 124
* ltp-timers-tests - pass: 12,

Documentation - https://collaborate.linaro.org/display/LKFT/Email+Reports
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>

Re: [PATCH 4.4 75/78] Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

[Brian Norris]

Hi,

On Fri, Dec 22, 2017 at 09:46:56AM +0100, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> This reverts commit ffc7565746bb2fc063fc0f484c55ef6d8951a6ee which is
> commit a0085f2510e8976614ad8f766b209448b385492f upstream.
> 
> It causes problems with working systems, as noted by a number of the
> ChromeOS developers.
> 
> Cc: Sukumar Ghorai <sukumar.ghorai@intel.com>
> Cc: Amit K Bag <amit.k.bag@intel.com>
> Cc: Oliver Neukum <oneukum@suse.com>
> Cc: Marcel Holtmann <marcel@holtmann.org>
> Cc: Matthias Kaehlcke <mka@chromium.org>
> Reported-by: Guenter Roeck <linux@roeck-us.net>
> Reported-by: Brian Norris <briannorris@chromium.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

FWIW:
Acked-by: Brian Norris <briannorris@chromium.org>

Thanks for working past the confusion.

> ---
>  drivers/bluetooth/btusb.c |    5 -----
>  1 file changed, 5 deletions(-)
> 
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -1050,10 +1050,6 @@ static int btusb_open(struct hci_dev *hd
>  		return err;
>  
>  	data->intf->needs_remote_wakeup = 1;
> -	/* device specific wakeup source enabled and required for USB
> -	 * remote wakeup while host is suspended
> -	 */
> -	device_wakeup_enable(&data->udev->dev);
>  
>  	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
>  		goto done;
> @@ -1117,7 +1113,6 @@ static int btusb_close(struct hci_dev *h
>  		goto failed;
>  
>  	data->intf->needs_remote_wakeup = 0;
> -	device_wakeup_disable(&data->udev->dev);
>  	usb_autopm_put_interface(data->intf);
>  
>  failed:
> 
> 

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.108 release.
> There are 78 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> Anything received after that time might be too late.
> 

I lost track with versions. This is with v4.4.107-79-g0989207.

Build results:
	total: 145 pass: 144 fail: 1
Failed builds: 
	alpha:allmodconfig
Qemu test results:
	total: 118 pass: 118 fail: 0

alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
alpha/include/asm/mmu_context.h: In function 'init_new_context':
arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')

Didn't I already report this ?

Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Shuah Khan]

On 12/22/2017 01:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.108 release.
> There are 78 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.108-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.4 75/78] Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

[Greg Kroah-Hartman]

On Fri, Dec 22, 2017 at 09:32:52AM -0800, Brian Norris wrote:
> Hi,
> 
> On Fri, Dec 22, 2017 at 09:46:56AM +0100, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> > This reverts commit ffc7565746bb2fc063fc0f484c55ef6d8951a6ee which is
> > commit a0085f2510e8976614ad8f766b209448b385492f upstream.
> > 
> > It causes problems with working systems, as noted by a number of the
> > ChromeOS developers.
> > 
> > Cc: Sukumar Ghorai <sukumar.ghorai@intel.com>
> > Cc: Amit K Bag <amit.k.bag@intel.com>
> > Cc: Oliver Neukum <oneukum@suse.com>
> > Cc: Marcel Holtmann <marcel@holtmann.org>
> > Cc: Matthias Kaehlcke <mka@chromium.org>
> > Reported-by: Guenter Roeck <linux@roeck-us.net>
> > Reported-by: Brian Norris <briannorris@chromium.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> FWIW:
> Acked-by: Brian Norris <briannorris@chromium.org>

Now added, thanks.

> Thanks for working past the confusion.

Thanks for pushing through my confusion :)

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Fri, Dec 22, 2017 at 10:54:51PM +0530, Naresh Kamboju wrote:
> On 22 December 2017 at 14:15, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > This is the start of the stable review cycle for the 4.4.108 release.
> > There are 78 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.108-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.

Yeah!  thanks for letting me know.

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
> On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.108 release.
> > There are 78 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> I lost track with versions. This is with v4.4.107-79-g0989207.
> 
> Build results:
> 	total: 145 pass: 144 fail: 1
> Failed builds: 
> 	alpha:allmodconfig
> Qemu test results:
> 	total: 118 pass: 118 fail: 0
> 
> alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
> arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
> arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
> alpha/include/asm/mmu_context.h: In function 'init_new_context':
> arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
> arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
> arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
> 
> Didn't I already report this ?

I thought that was a 4.9 issue.  Let me look into this later today,
thanks for the report...

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Sat, Dec 23, 2017 at 10:19:32AM +0100, Greg Kroah-Hartman wrote:
> On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
> > On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.4.108 release.
> > > There are 78 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > > Anything received after that time might be too late.
> > > 
> > 
> > I lost track with versions. This is with v4.4.107-79-g0989207.
> > 
> > Build results:
> > 	total: 145 pass: 144 fail: 1
> > Failed builds: 
> > 	alpha:allmodconfig
> > Qemu test results:
> > 	total: 118 pass: 118 fail: 0
> > 
> > alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
> > arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
> > arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
> > alpha/include/asm/mmu_context.h: In function 'init_new_context':
> > arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
> > arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
> > arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
> > 
> > Didn't I already report this ?
> 
> I thought that was a 4.9 issue.  Let me look into this later today,
> thanks for the report...

Hm, yeah, looks to be the same issue that 4.9 had.  I resolve that by
ripping out the whole series, which I don't want to do here.  Let me see
if I can resolve it simpler...

Does anyone even still have alpha machines anymore?  :)

thanks,

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On 12/23/2017 06:46 AM, Greg Kroah-Hartman wrote:
> On Sat, Dec 23, 2017 at 10:19:32AM +0100, Greg Kroah-Hartman wrote:
>> On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
>>> On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 4.4.108 release.
>>>> There are 78 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
>>>> Anything received after that time might be too late.
>>>>
>>>
>>> I lost track with versions. This is with v4.4.107-79-g0989207.
>>>
>>> Build results:
>>> 	total: 145 pass: 144 fail: 1
>>> Failed builds:
>>> 	alpha:allmodconfig
>>> Qemu test results:
>>> 	total: 118 pass: 118 fail: 0
>>>
>>> alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
>>> arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
>>> arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
>>> alpha/include/asm/mmu_context.h: In function 'init_new_context':
>>> arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
>>> arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
>>> arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
>>>
>>> Didn't I already report this ?
>>
>> I thought that was a 4.9 issue.  Let me look into this later today,
>> thanks for the report...
> 
> Hm, yeah, looks to be the same issue that 4.9 had.  I resolve that by
> ripping out the whole series, which I don't want to do here.  Let me see
> if I can resolve it simpler...
> 

Apply 8ee912dab95f ("alpha: fix build failures") and fix conflict by picking
the new include files. I am currently rebuilding with that applied to ensure
that it breaks nothing else.

Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Sat, Dec 23, 2017 at 08:13:48AM -0800, Guenter Roeck wrote:
> On 12/23/2017 06:46 AM, Greg Kroah-Hartman wrote:
> > On Sat, Dec 23, 2017 at 10:19:32AM +0100, Greg Kroah-Hartman wrote:
> > > On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
> > > > On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 4.4.108 release.
> > > > > There are 78 patches in this series, all will be posted as a response
> > > > > to this one.  If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > > 
> > > > > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > > > > Anything received after that time might be too late.
> > > > > 
> > > > 
> > > > I lost track with versions. This is with v4.4.107-79-g0989207.
> > > > 
> > > > Build results:
> > > > 	total: 145 pass: 144 fail: 1
> > > > Failed builds:
> > > > 	alpha:allmodconfig
> > > > Qemu test results:
> > > > 	total: 118 pass: 118 fail: 0
> > > > 
> > > > alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
> > > > arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
> > > > arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
> > > > alpha/include/asm/mmu_context.h: In function 'init_new_context':
> > > > arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
> > > > arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
> > > > arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
> > > > 
> > > > Didn't I already report this ?
> > > 
> > > I thought that was a 4.9 issue.  Let me look into this later today,
> > > thanks for the report...
> > 
> > Hm, yeah, looks to be the same issue that 4.9 had.  I resolve that by
> > ripping out the whole series, which I don't want to do here.  Let me see
> > if I can resolve it simpler...
> > 
> 
> Apply 8ee912dab95f ("alpha: fix build failures") and fix conflict by picking
> the new include files. I am currently rebuilding with that applied to ensure
> that it breaks nothing else.

Now added, and pushed out, let me know how that goes.

Again, many thanks for your help here,

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On 12/23/2017 08:26 AM, Greg Kroah-Hartman wrote:
> On Sat, Dec 23, 2017 at 08:13:48AM -0800, Guenter Roeck wrote:
>> On 12/23/2017 06:46 AM, Greg Kroah-Hartman wrote:
>>> On Sat, Dec 23, 2017 at 10:19:32AM +0100, Greg Kroah-Hartman wrote:
>>>> On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
>>>>> On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
>>>>>> This is the start of the stable review cycle for the 4.4.108 release.
>>>>>> There are 78 patches in this series, all will be posted as a response
>>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>>> let me know.
>>>>>>
>>>>>> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
>>>>>> Anything received after that time might be too late.
>>>>>>
>>>>>
>>>>> I lost track with versions. This is with v4.4.107-79-g0989207.
>>>>>
>>>>> Build results:
>>>>> 	total: 145 pass: 144 fail: 1
>>>>> Failed builds:
>>>>> 	alpha:allmodconfig
>>>>> Qemu test results:
>>>>> 	total: 118 pass: 118 fail: 0
>>>>>
>>>>> alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
>>>>> arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
>>>>> arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
>>>>> alpha/include/asm/mmu_context.h: In function 'init_new_context':
>>>>> arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
>>>>> arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
>>>>> arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
>>>>>
>>>>> Didn't I already report this ?
>>>>
>>>> I thought that was a 4.9 issue.  Let me look into this later today,
>>>> thanks for the report...
>>>
>>> Hm, yeah, looks to be the same issue that 4.9 had.  I resolve that by
>>> ripping out the whole series, which I don't want to do here.  Let me see
>>> if I can resolve it simpler...
>>>
>>
>> Apply 8ee912dab95f ("alpha: fix build failures") and fix conflict by picking
>> the new include files. I am currently rebuilding with that applied to ensure
>> that it breaks nothing else.
> 
> Now added, and pushed out, let me know how that goes.
> 
Confirmed fixed. I'll send a complete build report later.

> Again, many thanks for your help here,
> 

My pleasure. And pure self-interest, of course. After all, I can hardly argue
for stable release merges if stable is broken.

Thanks,
Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On 12/23/2017 08:26 AM, Greg Kroah-Hartman wrote:
> On Sat, Dec 23, 2017 at 08:13:48AM -0800, Guenter Roeck wrote:
>> On 12/23/2017 06:46 AM, Greg Kroah-Hartman wrote:
>>> On Sat, Dec 23, 2017 at 10:19:32AM +0100, Greg Kroah-Hartman wrote:
>>>> On Fri, Dec 22, 2017 at 10:18:31AM -0800, Guenter Roeck wrote:
>>>>> On Fri, Dec 22, 2017 at 09:45:41AM +0100, Greg Kroah-Hartman wrote:
>>>>>> This is the start of the stable review cycle for the 4.4.108 release.
>>>>>> There are 78 patches in this series, all will be posted as a response
>>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>>> let me know.
>>>>>>
>>>>>> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
>>>>>> Anything received after that time might be too late.
>>>>>>
>>>>>
>>>>> I lost track with versions. This is with v4.4.107-79-g0989207.
>>>>>
>>>>> Build results:
>>>>> 	total: 145 pass: 144 fail: 1
>>>>> Failed builds:
>>>>> 	alpha:allmodconfig
>>>>> Qemu test results:
>>>>> 	total: 118 pass: 118 fail: 0
>>>>>
>>>>> alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
>>>>> arch/alpha/include/asm/mmu_context.h:158:2: error: implicit declaration of function 'task_thread_info'
>>>>> arch/alpha/include/asm/mmu_context.h:158:24: error: invalid type argument of '->' (have 'int')
>>>>> alpha/include/asm/mmu_context.h: In function 'init_new_context':
>>>>> arch/alpha/include/asm/mmu_context.h:236:24: error: invalid type argument of '->' (have 'int')
>>>>> arch/alpha/include/asm/mmu_context.h: In function 'enter_lazy_tlb':
>>>>> arch/alpha/include/asm/mmu_context.h:250:23: error: invalid type argument of '->' (have 'int')
>>>>>
>>>>> Didn't I already report this ?
>>>>
>>>> I thought that was a 4.9 issue.  Let me look into this later today,
>>>> thanks for the report...
>>>
>>> Hm, yeah, looks to be the same issue that 4.9 had.  I resolve that by
>>> ripping out the whole series, which I don't want to do here.  Let me see
>>> if I can resolve it simpler...
>>>
>>
>> Apply 8ee912dab95f ("alpha: fix build failures") and fix conflict by picking
>> the new include files. I am currently rebuilding with that applied to ensure
>> that it breaks nothing else.
> 
> Now added, and pushed out, let me know how that goes.
> 

Are you sure that you pushed it into the git repository ?
Turns out my builders didn't pick it up, not even when I tried manually.

Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On 12/22/2017 12:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.108 release.
> There are 78 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> Anything received after that time might be too late.
> 

For v4.4.107-79-g0989207:

Build results:
	total: 145 pass: 144 fail: 1
Failed builds:
	alpha:allmodconfig
Qemu test results:
	total: 118 pass: 118 fail: 0

The alpha fix is missing from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
branch linux-4.4.y; it points to the same sha.

Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Sat, Dec 23, 2017 at 05:30:42PM -0800, Guenter Roeck wrote:
> On 12/22/2017 12:45 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.108 release.
> > There are 78 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> For v4.4.107-79-g0989207:
> 
> Build results:
> 	total: 145 pass: 144 fail: 1
> Failed builds:
> 	alpha:allmodconfig
> Qemu test results:
> 	total: 118 pass: 118 fail: 0
> 
> The alpha fix is missing from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> branch linux-4.4.y; it points to the same sha.

Ah, I only updated my quilt tree, sorry about that, let me go push this
out now...

greg k-h

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Guenter Roeck]

On 12/23/2017 11:43 PM, Greg Kroah-Hartman wrote:
> On Sat, Dec 23, 2017 at 05:30:42PM -0800, Guenter Roeck wrote:
>> On 12/22/2017 12:45 AM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.4.108 release.
>>> There are 78 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
>>> Anything received after that time might be too late.
>>>
>>
>> For v4.4.107-79-g0989207:
>>
>> Build results:
>> 	total: 145 pass: 144 fail: 1
>> Failed builds:
>> 	alpha:allmodconfig
>> Qemu test results:
>> 	total: 118 pass: 118 fail: 0
>>
>> The alpha fix is missing from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> branch linux-4.4.y; it points to the same sha.
> 
> Ah, I only updated my quilt tree, sorry about that, let me go push this
> out now...
> 

This is better. For v4.4.107-79-ge483f58:

Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 118 pass: 118 fail: 0

Guenter

Re: [PATCH 4.4 00/78] 4.4.108-stable review

[Greg Kroah-Hartman]

On Sun, Dec 24, 2017 at 08:52:43AM -0800, Guenter Roeck wrote:
> On 12/23/2017 11:43 PM, Greg Kroah-Hartman wrote:
> > On Sat, Dec 23, 2017 at 05:30:42PM -0800, Guenter Roeck wrote:
> > > On 12/22/2017 12:45 AM, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.4.108 release.
> > > > There are 78 patches in this series, all will be posted as a response
> > > > to this one.  If anyone has any issues with these being applied, please
> > > > let me know.
> > > > 
> > > > Responses should be made by Sun Dec 24 08:45:30 UTC 2017.
> > > > Anything received after that time might be too late.
> > > > 
> > > 
> > > For v4.4.107-79-g0989207:
> > > 
> > > Build results:
> > > 	total: 145 pass: 144 fail: 1
> > > Failed builds:
> > > 	alpha:allmodconfig
> > > Qemu test results:
> > > 	total: 118 pass: 118 fail: 0
> > > 
> > > The alpha fix is missing from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > branch linux-4.4.y; it points to the same sha.
> > 
> > Ah, I only updated my quilt tree, sorry about that, let me go push this
> > out now...
> > 
> 
> This is better. For v4.4.107-79-ge483f58:
> 
> Build results:
> 	total: 145 pass: 145 fail: 0
> Qemu test results:
> 	total: 118 pass: 118 fail: 0

Wonderful, thanks for you help with all of this.

greg k-h

Re: [PATCH 4.4 28/78] netfilter: nfnl_cthelper: fix runtime expectation policy updates

[Ben Hutchings]

On Fri, 2017-12-22 at 09:46 +0100, Greg Kroah-Hartman wrote:
> 4.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Pablo Neira Ayuso <pablo@netfilter.org>
> 
> 
> [ Upstream commit 2c422257550f123049552b39f7af6e3428a60f43 ]
> 
> We only allow runtime updates of expectation policies for timeout and
> maximum number of expectations, otherwise reject the update.
[...]
> +static int nfnl_cthelper_update_policy_all(struct nlattr *tb[],
> +					   struct nf_conntrack_helper *helper)
> +{
> +	struct nf_conntrack_expect_policy new_policy[helper->expect_class_max + 1];
> +	struct nf_conntrack_expect_policy *policy;
> +	int i, err;
> +
> +	/* Check first that all policy attributes are well-formed, so we don't
> +	 * leave things in inconsistent state on errors.
> +	 */
> +	for (i = 0; i < helper->expect_class_max + 1; i++) {
> +
> +		if (!tb[NFCTH_POLICY_SET + i])
> +			return -EINVAL;
> +
> +		err = nfnl_cthelper_update_policy_one(&helper->expect_policy[i],
> +						      &new_policy[i],
> +						      tb[NFCTH_POLICY_SET + i]);
> +		if (err < 0)
> +			return err;
> +	}
> +	/* Now we can safely update them. */
> +	for (i = 0; i < helper->expect_class_max + 1; i++) {
> +		policy = (struct nf_conntrack_expect_policy *)
> +				&helper->expect_policy[i];
> +		policy->max_expected = new_policy->max_expected;
> +		policy->timeout	= new_policy->timeout;
[...]

Shouldn't the RHS of these two assignments use new_policy[i]?

Ben.

-- 
Ben Hutchings
Software Developer, Codethink Ltd.