LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Dominik Brodowski <linux@dominikbrodowski.net>
To: linux-kernel@vger.kernel.org, mingo@kernel.org, x86@kernel.org
Cc: dan.j.williams@intel.com, tglx@linutronix.de, ak@linux.intel.com,
	torvalds@linux-foundation.org, luto@kernel.org
Subject: [PATCH v3 5/7] x86/entry: use PUSH_AND_CLEAN_REGS in more cases
Date: Sun, 11 Feb 2018 11:49:46 +0100
Message-ID: <20180211104949.12992-6-linux@dominikbrodowski.net> (raw)
In-Reply-To: <20180211104949.12992-1-linux@dominikbrodowski.net>

entry_SYSCALL_64_after_hwframe and nmi can be converted to use
PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to
the interleaving, the additional XOR-based clearing of r8 and r9
in entry_SYSCALL_64_after_hwframe should not have any noticeable
negative implications.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 arch/x86/entry/calling.h  |  6 ++---
 arch/x86/entry/entry_64.S | 65 +++--------------------------------------------
 2 files changed, 6 insertions(+), 65 deletions(-)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 57b1b87a04f0..d6a97e2945ee 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -137,7 +137,7 @@ For 32-bit we have the following conventions - kernel is built with
 	UNWIND_HINT_REGS offset=\offset
 	.endm
 
-	.macro PUSH_AND_CLEAR_REGS
+	.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax
 	/*
 	 * Push registers and sanitize registers of values that a
 	 * speculation attack might otherwise want to exploit. The
@@ -147,9 +147,9 @@ For 32-bit we have the following conventions - kernel is built with
 	 */
 	pushq   %rdi		/* pt_regs->di */
 	pushq   %rsi		/* pt_regs->si */
-	pushq   %rdx		/* pt_regs->dx */
+	pushq	\rdx		/* pt_regs->dx */
 	pushq   %rcx		/* pt_regs->cx */
-	pushq   %rax		/* pt_regs->ax */
+	pushq   \rax		/* pt_regs->ax */
 	pushq   %r8		/* pt_regs->r8 */
 	xorq    %r8, %r8	/* nospec   r8 */
 	pushq   %r9		/* pt_regs->r9 */
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 9dd3fbfdc75d..9c4fe360db42 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -227,35 +227,8 @@ ENTRY(entry_SYSCALL_64)
 	pushq	%rcx				/* pt_regs->ip */
 GLOBAL(entry_SYSCALL_64_after_hwframe)
 	pushq	%rax				/* pt_regs->orig_ax */
-	pushq	%rdi				/* pt_regs->di */
-	pushq	%rsi				/* pt_regs->si */
-	pushq	%rdx				/* pt_regs->dx */
-	pushq	%rcx				/* pt_regs->cx */
-	pushq	$-ENOSYS			/* pt_regs->ax */
-	pushq	%r8				/* pt_regs->r8 */
-	pushq	%r9				/* pt_regs->r9 */
-	pushq	%r10				/* pt_regs->r10 */
-	/*
-	 * Clear extra registers that a speculation attack might
-	 * otherwise want to exploit. Interleave XOR with PUSH
-	 * for better uop scheduling:
-	 */
-	xorq	%r10, %r10			/* nospec   r10 */
-	pushq	%r11				/* pt_regs->r11 */
-	xorq	%r11, %r11			/* nospec   r11 */
-	pushq	%rbx				/* pt_regs->rbx */
-	xorl	%ebx, %ebx			/* nospec   rbx */
-	pushq	%rbp				/* pt_regs->rbp */
-	xorl	%ebp, %ebp			/* nospec   rbp */
-	pushq	%r12				/* pt_regs->r12 */
-	xorq	%r12, %r12			/* nospec   r12 */
-	pushq	%r13				/* pt_regs->r13 */
-	xorq	%r13, %r13			/* nospec   r13 */
-	pushq	%r14				/* pt_regs->r14 */
-	xorq	%r14, %r14			/* nospec   r14 */
-	pushq	%r15				/* pt_regs->r15 */
-	xorq	%r15, %r15			/* nospec   r15 */
-	UNWIND_HINT_REGS
+
+	PUSH_AND_CLEAR_REGS rax=$-ENOSYS
 
 	TRACE_IRQS_OFF
 
@@ -1388,39 +1361,7 @@ ENTRY(nmi)
 	pushq	1*8(%rdx)	/* pt_regs->rip */
 	UNWIND_HINT_IRET_REGS
 	pushq   $-1		/* pt_regs->orig_ax */
-	pushq   %rdi		/* pt_regs->di */
-	pushq   %rsi		/* pt_regs->si */
-	pushq   (%rdx)		/* pt_regs->dx */
-	pushq   %rcx		/* pt_regs->cx */
-	pushq   %rax		/* pt_regs->ax */
-	/*
-	 * Sanitize registers of values that a speculation attack
-	 * might otherwise want to exploit. The lower registers are
-	 * likely clobbered well before they could be put to use in
-	 * a speculative execution gadget. Interleave XOR with PUSH
-	 * for better uop scheduling:
-	 */
-	pushq   %r8		/* pt_regs->r8 */
-	xorq    %r8, %r8	/* nospec   r8 */
-	pushq   %r9		/* pt_regs->r9 */
-	xorq    %r9, %r9	/* nospec   r9 */
-	pushq   %r10		/* pt_regs->r10 */
-	xorq    %r10, %r10	/* nospec   r10 */
-	pushq   %r11		/* pt_regs->r11 */
-	xorq    %r11, %r11	/* nospec   r11*/
-	pushq	%rbx		/* pt_regs->rbx */
-	xorl    %ebx, %ebx	/* nospec   rbx*/
-	pushq	%rbp		/* pt_regs->rbp */
-	xorl    %ebp, %ebp	/* nospec   rbp*/
-	pushq	%r12		/* pt_regs->r12 */
-	xorq    %r12, %r12	/* nospec   r12*/
-	pushq	%r13		/* pt_regs->r13 */
-	xorq    %r13, %r13	/* nospec   r13*/
-	pushq	%r14		/* pt_regs->r14 */
-	xorq    %r14, %r14	/* nospec   r14*/
-	pushq	%r15		/* pt_regs->r15 */
-	xorq    %r15, %r15	/* nospec   r15*/
-	UNWIND_HINT_REGS
+	PUSH_AND_CLEAR_REGS rdx=(%rdx)
 	ENCODE_FRAME_POINTER
 
 	/*
-- 
2.16.1

  parent reply index

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-11 10:49 [PATCH v3 0/7] x86/entry: simplify and unify SAVE/POP_REGS Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 1/7] x86/entry: merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions Dominik Brodowski
2018-02-12 10:15   ` [tip:x86/pti] x86/entry/64: Merge " tip-bot for Dominik Brodowski
2018-02-13  9:00   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 2/7] x86/entry: merge POP_C_REGS and POP_EXTRA_REGS Dominik Brodowski
2018-02-12 10:16   ` [tip:x86/pti] x86/entry/64: Merge the POP_C_REGS and POP_EXTRA_REGS macros into a single POP_REGS macro tip-bot for Dominik Brodowski
2018-02-13  9:01   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 3/7] x86/entry: interleave XOR register clearing with PUSH instructions Dominik Brodowski
2018-02-12 10:16   ` [tip:x86/pti] x86/entry/64: Interleave " tip-bot for Dominik Brodowski
2018-02-13  9:01   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 4/7] x86/entry: introduce PUSH_AND_CLEAN_REGS Dominik Brodowski
2018-02-12 10:17   ` [tip:x86/pti] x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro tip-bot for Dominik Brodowski
2018-02-12 13:29     ` Denys Vlasenko
2018-02-12 13:36       ` David Laight
2018-02-12 13:43         ` Denys Vlasenko
2018-02-12 16:51       ` Linus Torvalds
2018-02-13  9:01   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` Dominik Brodowski [this message]
2018-02-12 10:17   ` [tip:x86/pti] x86/entry/64: Use PUSH_AND_CLEAN_REGS in more cases tip-bot for Dominik Brodowski
2018-02-13  9:02   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 6/7] x86/entry: get rid of ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS Dominik Brodowski
2018-02-12 10:18   ` [tip:x86/pti] x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros tip-bot for Dominik Brodowski
2018-02-13  9:02   ` tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 7/7] x86/entry: indent PUSH_AND_CLEAR_REGS and POP_REGS properly Dominik Brodowski
2018-02-12 10:18   ` [tip:x86/pti] x86/entry/64: Indent " tip-bot for Dominik Brodowski
2018-02-12 20:13     ` [PATCH] x86/entry/64: Remove unused icebp macro Borislav Petkov
2018-02-13  7:36       ` Ingo Molnar
2018-02-13  9:04       ` [tip:x86/pti] x86/entry/64: Remove the unused 'icebp' macro tip-bot for Borislav Petkov
2018-02-13  9:03   ` [tip:x86/pti] x86/entry/64: Indent PUSH_AND_CLEAR_REGS and POP_REGS properly tip-bot for Dominik Brodowski
2018-02-11 10:49 ` [PATCH v3 8/7] TESTING_ONLY x86/entry: reduce static footprint of idtentry Dominik Brodowski
2018-02-12  9:37   ` Ingo Molnar
2018-02-12 19:17     ` Linus Torvalds
2018-02-13 12:41       ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180211104949.12992-6-linux@dominikbrodowski.net \
    --to=linux@dominikbrodowski.net \
    --cc=ak@linux.intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git