From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: joel@jms.id.au, andrew@aj.id.au, arnd@arndb.de,
gregkh@linuxfoundation.org, jdelvare@suse.com,
linux@roeck-us.net, benh@kernel.crashing.org, andrew@lunn.ch
Cc: linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH v2 3/8] [PATCH 3/8] ARM: dts: aspeed: peci: Add PECI node
Date: Wed, 21 Feb 2018 08:16:01 -0800 [thread overview]
Message-ID: <20180221161606.32247-4-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20180221161606.32247-1-jae.hyun.yoo@linux.intel.com>
This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 25 +++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 25 +++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b0d8431a3700..077b4d6795b8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -250,6 +251,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -290,6 +298,23 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ clock-frequency = <24000000>;
+ msg-timing-nego = <1>;
+ addr-timing-nego = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 40de3b66c33f..5d3b5e177a32 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -301,6 +302,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -341,6 +349,23 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ clock-frequency = <24000000>;
+ msg-timing-nego = <1>;
+ addr-timing-nego = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
--
2.16.1
next prev parent reply other threads:[~2018-02-21 16:16 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 16:15 [PATCH v2 0/8] PECI device driver introduction Jae Hyun Yoo
2018-02-21 16:15 ` [PATCH v2 1/8] [PATCH 1/8] drivers/peci: Add support for PECI bus driver core Jae Hyun Yoo
2018-02-21 17:04 ` Andrew Lunn
2018-02-21 20:31 ` Jae Hyun Yoo
2018-02-21 21:51 ` Andrew Lunn
2018-02-21 22:03 ` Jae Hyun Yoo
2018-02-21 17:58 ` Greg KH
2018-02-21 20:42 ` Jae Hyun Yoo
2018-02-22 6:54 ` Greg KH
2018-02-22 17:20 ` Jae Hyun Yoo
2018-02-22 7:01 ` kbuild test robot
2018-02-22 7:01 ` [RFC PATCH] drivers/peci: peci_match_id() can be static kbuild test robot
2018-02-22 17:25 ` Jae Hyun Yoo
2018-03-07 3:19 ` [PATCH v2 1/8] [PATCH 1/8] drivers/peci: Add support for PECI bus driver core Julia Cartwright
2018-03-07 19:03 ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 2/8] [PATCH 2/8] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs Jae Hyun Yoo
2018-02-21 17:13 ` Andrew Lunn
2018-02-21 20:35 ` Jae Hyun Yoo
2018-03-06 12:40 ` Pavel Machek
2018-03-06 12:54 ` Andrew Lunn
2018-03-06 13:05 ` Pavel Machek
2018-03-06 13:19 ` Arnd Bergmann
2018-03-06 19:05 ` Jae Hyun Yoo
2018-03-07 22:11 ` Pavel Machek
2018-03-09 23:41 ` Milton Miller II
2018-03-09 23:47 ` Jae Hyun Yoo
2018-02-21 16:16 ` Jae Hyun Yoo [this message]
2018-02-21 16:16 ` [PATCH v2 4/8] [PATCH 4/8] drivers/peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 5/8] [PATCH [5/8] Documentation: dt-bindings: Add a document for PECI hwmon client driver Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 6/8] [PATCH 6/8] Documentation: hwmon: " Jae Hyun Yoo
2018-03-06 20:28 ` Randy Dunlap
2018-03-06 21:08 ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 7/8] [PATCH 7/8] drivers/hwmon: Add a generic " Jae Hyun Yoo
2018-02-21 18:26 ` Guenter Roeck
2018-02-21 21:24 ` Jae Hyun Yoo
2018-02-21 21:48 ` Guenter Roeck
2018-02-21 23:07 ` Jae Hyun Yoo
2018-02-22 0:37 ` Andrew Lunn
2018-02-22 1:29 ` Jae Hyun Yoo
2018-02-24 0:00 ` Miguel Ojeda
2018-02-24 9:32 ` Jae Hyun Yoo
2018-03-13 9:32 ` Stef van Os
2018-03-13 18:56 ` Jae Hyun Yoo
2018-02-21 16:16 ` [PATCH v2 8/8] [PATCH 8/8] Add a maintainer for the PECI subsystem Jae Hyun Yoo
2018-03-06 12:40 ` [PATCH v2 0/8] PECI device driver introduction Pavel Machek
2018-03-06 19:21 ` Jae Hyun Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180221161606.32247-4-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=andrew@aj.id.au \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jdelvare@suse.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).