[PATCH 3.18 00/58] 3.18.96-stable review

[PATCH 3.18 00/58] 3.18.96-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.96 release.
There are 58 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Feb 25 17:01:41 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.96-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.96-rc1

Kamil Konieczny <k.konieczny@partner.samsung.com>
    crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

Wanpeng Li <wanpeng.li@hotmail.com>
    KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously

Jia-Ju Bai <baijiaju1990@163.com>
    hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

Jan Beulich <JBeulich@suse.com>
    xen: XEN_ACPI_PROCESSOR is Dom0-only

Karol Herbst <kherbst@redhat.com>
    x86/mm/kmmio: Fix mmiotrace for page unaligned addresses

Dave Young <dyoung@redhat.com>
    mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep

Tobias Jordan <Tobias.Jordan@elektrobit.com>
    dmaengine: jz4740: disable/unprepare clk if probe fails

Steffen Klassert <steffen.klassert@secunet.com>
    xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.

Takuo Koguchi <takuo.koguchi@gmail.com>
    spi: sun4i: disable clocks in the remove function

Eric Biggers <ebiggers3@gmail.com>
    509: fix printing uninitialized stack memory when OID is empty

Nikolay Borisov <nborisov@suse.com>
    btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

Nogah Frankel <nogahf@mellanox.com>
    net_sched: red: Avoid illegal values

Nogah Frankel <nogahf@mellanox.com>
    net_sched: red: Avoid devision by zero

Zumeng Chen <zumeng.chen@gmail.com>
    gianfar: fix a flooded alignment reports because of padding issue.

Stefan Haberland <sth@linux.vnet.ibm.com>
    s390/dasd: prevent prefix I/O error

Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
    powerpc/perf: Fix oops when grouping different pmu events

Greg Ungerer <gerg@linux-m68k.org>
    m68k: add missing SOFTIRQENTRY_TEXT linker section

Will Deacon <will.deacon@arm.com>
    scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none

Mauro Carvalho Chehab <mchehab@s-opensource.com>
    media: s5k6aa: describe some function parameters

Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
    perf bench numa: Fixup discontiguous/sparse numa nodes

Jiri Olsa <jolsa@kernel.org>
    perf top: Fix window dimensions change handling

Peter Ujfalusi <peter.ujfalusi@ti.com>
    ARM: dts: am4372: Correct the interrupts_properties of McASP

Keerthy <j-keerthy@ti.com>
    ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

Randy Dunlap <rdunlap@infradead.org>
    usb: build drivers/usb/common/ when USB_SUPPORT is set

Shuah Khan <shuahkh@osg.samsung.com>
    usbip: keep usbip_device sockfd state in sync with tcp_socket

Paolo Abeni <pabeni@redhat.com>
    dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock

Arnd Bergmann <arnd@arndb.de>
    video: fbdev/mmp: add MODULE_LICENSE

Arnd Bergmann <arnd@arndb.de>
    ASoC: ux500: add MODULE_LICENSE tag

Paul Moore <paul@paul-moore.com>
    selinux: ensure the context is NUL terminated in security_context_to_sid_core()

David Howells <dhowells@redhat.com>
    Provide a function to create a NUL-terminated string from unterminated data

Willem de Bruijn <willemb@google.com>
    net: avoid skb_warn_bad_offload on IS_ERR

Cong Wang <xiyou.wangcong@gmail.com>
    netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert

Paolo Abeni <pabeni@redhat.com>
    netfilter: on sockopt() acquire sock lock only in the required scope

Dmitry Vyukov <dvyukov@google.com>
    netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()

Eric Dumazet <edumazet@google.com>
    netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}

Dmitry Vyukov <dvyukov@google.com>
    netfilter: x_tables: fix int overflow in xt_alloc_table_info()

Laura Abbott <labbott@redhat.com>
    staging: android: ion: Add __GFP_NOWARN for system contig heap

Eric Biggers <ebiggers@google.com>
    crypto: x86/twofish-3way - Fix %rbp usage

Paul Moore <paul@paul-moore.com>
    selinux: skip bounded transition processing if the policy isn't loaded

Cong Wang <xiyou.wangcong@gmail.com>
    xfrm: check id proto in validate_tmpl()

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.

Arnd Bergmann <arnd@arndb.de>
    media: r820t: fix r820t_write_reg for KASAN

Arnd Bergmann <arnd@arndb.de>
    ARM: dts: s5pv210: add interrupt-parent for ohci

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix racy pool initializations

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: fix crash due to not cleaning up tree log block's dirty bits

Liu Bo <bo.li.liu@oracle.com>
    Btrfs: fix deadlock in run_delalloc_nocow

Nicolas Pitre <nicolas.pitre@linaro.org>
    console/dummy: leave .con_font_get set to NULL

Johan Hovold <johan@kernel.org>
    video: fbdev: atmel_lcdfb: fix display-timings lookup

Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
    ext4: correct documentation for grpid mount option

Zhouyi Zhou <zhouzhouyi@gmail.com>
    ext4: save error to disk in __ext4_grp_locked_error()

Julia Lawall <Julia.Lawall@lip6.fr>
    drm/radeon: adjust tested variable

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix regression by incorrect ioctl_mutex usages

Viresh Kumar <viresh.kumar@linaro.org>
    arm: spear13xx: Fix spics gpio controller's warning

Viresh Kumar <viresh.kumar@linaro.org>
    arm: spear13xx: Fix dmas cells

Viresh Kumar <viresh.kumar@linaro.org>
    arm: spear600: Add missing interrupt-parent of rtc

Eugene Syromiatnikov <esyr@redhat.com>
    s390: fix handling of -1 in set{,fs}[gu]id16 syscalls

Bjorn Andersson <bjorn.andersson@linaro.org>
    PM / devfreq: Propagate error from devfreq_add_device()

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports


-------------

Diffstat:

 Documentation/devicetree/bindings/dma/snps-dma.txt |   2 +-
 Documentation/filesystems/ext4.txt                 |   2 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/am4372.dtsi                      |   6 +-
 arch/arm/boot/dts/s5pv210.dtsi                     |   1 +
 arch/arm/boot/dts/spear1310-evb.dts                |   2 +-
 arch/arm/boot/dts/spear1340.dtsi                   |   4 +-
 arch/arm/boot/dts/spear13xx.dtsi                   |   6 +-
 arch/arm/boot/dts/spear600.dtsi                    |   1 +
 arch/arm/mach-omap2/prm33xx.c                      |  12 ---
 arch/m68k/kernel/vmlinux-nommu.lds                 |   2 +
 arch/m68k/kernel/vmlinux-std.lds                   |   2 +
 arch/m68k/kernel/vmlinux-sun3.lds                  |   2 +
 arch/powerpc/perf/core-book3s.c                    |   4 +-
 arch/s390/kernel/compat_linux.c                    |   8 +-
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S       | 112 +++++++++++----------
 arch/x86/kvm/x86.c                                 |  34 +++++--
 arch/x86/mm/ioremap.c                              |   4 +-
 arch/x86/mm/kmmio.c                                |  12 ++-
 drivers/Makefile                                   |   1 +
 drivers/crypto/s5p-sss.c                           |  13 ++-
 drivers/devfreq/devfreq.c                          |   2 +-
 drivers/dma/dma-jz4740.c                           |   4 +-
 drivers/gpu/drm/radeon/radeon_uvd.c                |   2 +-
 drivers/infiniband/hw/mlx4/main.c                  |  13 +--
 drivers/media/i2c/s5k6aa.c                         |   5 +
 drivers/media/tuners/r820t.c                       |  13 ++-
 drivers/net/ethernet/freescale/gianfar.c           |   6 +-
 drivers/net/ethernet/mellanox/mlx4/qp.c            |   3 +
 drivers/net/hippi/rrunner.c                        |   2 +-
 drivers/s390/block/dasd_eckd.c                     |  16 +--
 drivers/spi/spi-sun4i.c                            |   2 +-
 drivers/staging/android/ion/ion_system_heap.c      |   2 +-
 drivers/usb/usbip/stub_dev.c                       |   3 +
 drivers/usb/usbip/vhci_hcd.c                       |   2 +
 drivers/video/console/dummycon.c                   |   1 -
 drivers/video/fbdev/atmel_lcdfb.c                  |   8 +-
 drivers/video/fbdev/mmp/core.c                     |   5 +
 drivers/xen/Kconfig                                |   2 +-
 fs/btrfs/inode.c                                   |   5 +-
 fs/btrfs/ioctl.c                                   |   2 +-
 fs/btrfs/tree-log.c                                |   9 ++
 fs/ext4/super.c                                    |   1 +
 include/linux/string.h                             |   1 +
 include/net/red.h                                  |  13 ++-
 lib/oid_registry.c                                 |   8 +-
 mm/early_ioremap.c                                 |   2 +-
 mm/util.c                                          |  24 +++++
 mm/vmscan.c                                        |   3 +
 net/core/dev.c                                     |   2 +-
 net/decnet/af_decnet.c                             |  62 ++++++------
 net/ipv4/ip_sockglue.c                             |  14 +--
 net/ipv4/netfilter/ipt_CLUSTERIP.c                 |  16 ++-
 net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c     |   6 +-
 net/ipv6/ipv6_sockglue.c                           |  17 +---
 net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c     |  18 ++--
 net/netfilter/x_tables.c                           |  10 +-
 net/netfilter/xt_RATEEST.c                         |  22 +++-
 net/sched/sch_choke.c                              |   3 +
 net/sched/sch_gred.c                               |   3 +
 net/sched/sch_red.c                                |   2 +
 net/sched/sch_sfq.c                                |   3 +
 net/xfrm/xfrm_user.c                               |  24 +++++
 scripts/kernel-doc                                 |   2 +-
 security/selinux/ss/services.c                     |  21 ++--
 sound/core/seq/seq_clientmgr.c                     |  23 +++--
 sound/soc/ux500/mop500.c                           |   4 +
 sound/soc/ux500/ux500_pcm.c                        |   5 +
 tools/perf/bench/numa.c                            |  56 ++++++++++-
 tools/perf/builtin-top.c                           |  15 ++-
 70 files changed, 485 insertions(+), 236 deletions(-)

[PATCH 3.18 01/58] IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.

Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.

As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.

When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:

 mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0

Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).

Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/main.c       |   13 +++++--------
 drivers/net/ethernet/mellanox/mlx4/qp.c |    3 +++
 2 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -2348,9 +2348,8 @@ err_steer_free_bitmap:
 	kfree(ibdev->ib_uc_qpns_bitmap);
 
 err_steer_qp_release:
-	if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
-		mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
-				      ibdev->steer_qpn_count);
+	mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+			      ibdev->steer_qpn_count);
 err_counter:
 	for (; i; --i)
 		if (ibdev->counters[i - 1] != -1)
@@ -2452,11 +2451,9 @@ static void mlx4_ib_remove(struct mlx4_d
 		ibdev->iboe.nb.notifier_call = NULL;
 	}
 
-	if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
-		mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
-				      ibdev->steer_qpn_count);
-		kfree(ibdev->ib_uc_qpns_bitmap);
-	}
+	mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+			      ibdev->steer_qpn_count);
+	kfree(ibdev->ib_uc_qpns_bitmap);
 
 	if (ibdev->iboe.nb_inet.notifier_call) {
 		if (unregister_inetaddr_notifier(&ibdev->iboe.nb_inet))
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -257,6 +257,9 @@ void mlx4_qp_release_range(struct mlx4_d
 	u64 in_param = 0;
 	int err;
 
+	if (!cnt)
+		return;
+
 	if (mlx4_is_mfunc(dev)) {
 		set_param_l(&in_param, base_qpn);
 		set_param_h(&in_param, cnt);

[PATCH 3.18 02/58] PM / devfreq: Propagate error from devfreq_add_device()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson <bjorn.andersson@linaro.org>

commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.

Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.

Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: stable@vger.kernel.org
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/devfreq/devfreq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -585,7 +585,7 @@ struct devfreq *devm_devfreq_add_device(
 	devfreq = devfreq_add_device(dev, profile, governor_name, data);
 	if (IS_ERR(devfreq)) {
 		devres_free(ptr);
-		return ERR_PTR(-ENOMEM);
+		return devfreq;
 	}
 
 	*ptr = devfreq;

[PATCH 3.18 03/58] s390: fix handling of -1 in set{,fs}[gu]id16 syscalls

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugene Syromiatnikov <esyr@redhat.com>

commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.

For some reason, the implementation of some 16-bit ID system calls
(namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast
instead of low2highgid/low2highuid macros for converting [GU]IDs, which
led to incorrect handling of value of -1 (which ought to be considered
invalid).

Discovered by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/compat_linux.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -110,7 +110,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setregid16,
 
 COMPAT_SYSCALL_DEFINE1(s390_setgid16, u16, gid)
 {
-	return sys_setgid((gid_t)gid);
+	return sys_setgid(low2highgid(gid));
 }
 
 COMPAT_SYSCALL_DEFINE2(s390_setreuid16, u16, ruid, u16, euid)
@@ -120,7 +120,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setreuid16,
 
 COMPAT_SYSCALL_DEFINE1(s390_setuid16, u16, uid)
 {
-	return sys_setuid((uid_t)uid);
+	return sys_setuid(low2highuid(uid));
 }
 
 COMPAT_SYSCALL_DEFINE3(s390_setresuid16, u16, ruid, u16, euid, u16, suid)
@@ -173,12 +173,12 @@ COMPAT_SYSCALL_DEFINE3(s390_getresgid16,
 
 COMPAT_SYSCALL_DEFINE1(s390_setfsuid16, u16, uid)
 {
-	return sys_setfsuid((uid_t)uid);
+	return sys_setfsuid(low2highuid(uid));
 }
 
 COMPAT_SYSCALL_DEFINE1(s390_setfsgid16, u16, gid)
 {
-	return sys_setfsgid((gid_t)gid);
+	return sys_setfsgid(low2highgid(gid));
 }
 
 static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)

[PATCH 3.18 04/58] arm: spear600: Add missing interrupt-parent of rtc

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.

The interrupt-parent of rtc was missing, add it.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/spear600.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -194,6 +194,7 @@
 			rtc@fc900000 {
 				compatible = "st,spear600-rtc";
 				reg = <0xfc900000 0x1000>;
+				interrupt-parent = <&vic0>;
 				interrupts = <10>;
 				status = "disabled";
 			};

[PATCH 3.18 05/58] arm: spear13xx: Fix dmas cells

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream.

The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.

Cc: stable@vger.kernel.org # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/dma/snps-dma.txt |    2 +-
 arch/arm/boot/dts/spear1340.dtsi                   |    4 ++--
 arch/arm/boot/dts/spear13xx.dtsi                   |    6 +++---
 3 files changed, 6 insertions(+), 6 deletions(-)

--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -58,6 +58,6 @@ Example:
 		interrupts = <0 35 0x4>;
 		status = "disabled";
 		dmas = <&dmahost 12 0 1>,
-			<&dmahost 13 0 1 0>;
+			<&dmahost 13 1 0>;
 		dma-names = "rx", "rx";
 	};
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -141,8 +141,8 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
-					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+				dmas = <&dwdma0 12 0 1>,
+					<&dwdma0 13 1 0>;
 				dma-names = "tx", "rx";
 			};
 
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -100,7 +100,7 @@
 			reg = <0xb2800000 0x1000>;
 			interrupts = <0 29 0x4>;
 			status = "disabled";
-			dmas = <&dwdma0 0 0 0 0>;
+			dmas = <&dwdma0 0 0 0>;
 			dma-names = "data";
 		};
 
@@ -288,8 +288,8 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
-					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
+				dmas = <&dwdma0 4 0 0>,
+					<&dwdma0 5 0 0>;
 				dma-names = "tx", "rx";
 			};
 

[PATCH 3.18 06/58] arm: spear13xx: Fix spics gpio controllers warning

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.

This fixes the following warning by also sending the flags argument for
gpio controllers:

Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/spear1310-evb.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -349,7 +349,7 @@
 			spi0: spi@e0100000 {
 				status = "okay";
 				num-cs = <3>;
-				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+				cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
 
 				stmpe610@0 {
 					compatible = "st,stmpe610";

[PATCH 3.18 07/58] ALSA: seq: Fix regression by incorrect ioctl_mutex usages

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

This is the revised backport of the upstream commit
b3defb791b26ea0683a93a4f49c77ec45ec96f10

We had another backport (e.g. 623e5c8ae32b in 4.4.115), but it applies
the new mutex also to the code paths that are invoked via faked
kernel-to-kernel ioctls.  As reported recently, this leads to a
deadlock at suspend (or other scenarios triggering the kernel
sequencer client).

This patch addresses the issue by taking the mutex only in the code
paths invoked by user-space, just like the original fix patch does.

Reported-and-tested-by: Andres Bertens <abertensu@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

Tagged as 4.4.x, but should be applied to other older kernels, too.

 sound/core/seq/seq_clientmgr.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2201,7 +2201,6 @@ static int snd_seq_do_ioctl(struct snd_s
 			    void __user *arg)
 {
 	struct seq_ioctl_table *p;
-	int ret;
 
 	switch (cmd) {
 	case SNDRV_SEQ_IOCTL_PVERSION:
@@ -2215,12 +2214,8 @@ static int snd_seq_do_ioctl(struct snd_s
 	if (! arg)
 		return -EFAULT;
 	for (p = ioctl_tables; p->cmd; p++) {
-		if (p->cmd == cmd) {
-			mutex_lock(&client->ioctl_mutex);
-			ret = p->func(client, arg);
-			mutex_unlock(&client->ioctl_mutex);
-			return ret;
-		}
+		if (p->cmd == cmd)
+			return p->func(client, arg);
 	}
 	pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
 		   cmd, _IOC_TYPE(cmd), _IOC_NR(cmd));
@@ -2231,11 +2226,15 @@ static int snd_seq_do_ioctl(struct snd_s
 static long snd_seq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct snd_seq_client *client = file->private_data;
+	long ret;
 
 	if (snd_BUG_ON(!client))
 		return -ENXIO;
 		
-	return snd_seq_do_ioctl(client, cmd, (void __user *) arg);
+	mutex_lock(&client->ioctl_mutex);
+	ret = snd_seq_do_ioctl(client, cmd, (void __user *) arg);
+	mutex_unlock(&client->ioctl_mutex);
+	return ret;
 }
 
 #ifdef CONFIG_COMPAT

[PATCH 3.18 08/58] drm/radeon: adjust tested variable

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julia Lawall <Julia.Lawall@lip6.fr>

commit 3a61b527b4e1f285d21b6e9e623dc45cf8bb391f upstream.

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_uvd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -947,7 +947,7 @@ int radeon_uvd_calc_upll_dividers(struct
 		/* calc dclk divider with current vco freq */
 		dclk_div = radeon_uvd_calc_upll_post_div(vco_freq, dclk,
 							 pd_min, pd_even);
-		if (vclk_div > pd_max)
+		if (dclk_div > pd_max)
 			break; /* vco is too big, it has to stop */
 
 		/* calc score with current vco freq */

[PATCH 3.18 09/58] ext4: save error to disk in __ext4_grp_locked_error()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhouyi Zhou <zhouzhouyi@gmail.com>

commit 06f29cc81f0350261f59643a505010531130eea0 upstream.

In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.

This patch writes the error information to disk.  After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.

Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -677,6 +677,7 @@ __acquires(bitlock)
 	}
 
 	ext4_unlock_group(sb, grp);
+	ext4_commit_super(sb, 1);
 	ext4_handle_error(sb);
 	/*
 	 * We only get here in the ERRORS_RO case; relocking the group

[PATCH 3.18 10/58] ext4: correct documentation for grpid mount option

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

commit 9f0372488cc9243018a812e8cfbf27de650b187b upstream.

The grpid option is currently described as being the same as nogrpid.

Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/filesystems/ext4.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -233,7 +233,7 @@ data_err=ignore(*)	Just print an error m
 data_err=abort		Abort the journal if an error occurs in a file
 			data buffer in ordered mode.
 
-grpid			Give objects the same group ID as their creator.
+grpid			New objects have the group ID of their parent.
 bsdgroups
 
 nogrpid		(*)	New objects have the group ID of their creator.

[PATCH 3.18 11/58] video: fbdev: atmel_lcdfb: fix display-timings lookup

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

To make things worse, the parent display node was also prematurely
freed.

Note that the display and timings node references are never put after a
successful dt-initialisation so the nodes would leak on later probe
deferrals and on driver unbind.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Cc: stable <stable@vger.kernel.org>     # 3.13
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/atmel_lcdfb.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1121,7 +1121,7 @@ static int atmel_lcdfb_of_init(struct at
 		goto put_display_node;
 	}
 
-	timings_np = of_find_node_by_name(display_np, "display-timings");
+	timings_np = of_get_child_by_name(display_np, "display-timings");
 	if (!timings_np) {
 		dev_err(dev, "failed to find display-timings node\n");
 		ret = -ENODEV;
@@ -1142,6 +1142,12 @@ static int atmel_lcdfb_of_init(struct at
 		fb_add_videomode(&fb_vm, &info->modelist);
 	}
 
+	/*
+	 * FIXME: Make sure we are not referencing any fields in display_np
+	 * and timings_np and drop our references to them before returning to
+	 * avoid leaking the nodes on probe deferral and driver unbind.
+	 */
+
 	return 0;
 
 put_timings_node:

[PATCH 3.18 12/58] console/dummy: leave .con_font_get set to NULL

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream.

When this method is set, the caller expects struct console_font fields
to be properly initialized when it returns. Leave it unset otherwise
nonsensical (leaked kernel stack) values are returned to user space.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/console/dummycon.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -71,7 +71,6 @@ const struct consw dummy_con = {
     .con_switch =	DUMMY,
     .con_blank =	DUMMY,
     .con_font_set =	DUMMY,
-    .con_font_get =	DUMMY,
     .con_font_default =	DUMMY,
     .con_font_copy =	DUMMY,
     .con_set_palette =	DUMMY,

[PATCH 3.18 13/58] Btrfs: fix deadlock in run_delalloc_nocow

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.

@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.

cc: <stable@vger.kernel.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/inode.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1256,8 +1256,11 @@ next_slot:
 		leaf = path->nodes[0];
 		if (path->slots[0] >= btrfs_header_nritems(leaf)) {
 			ret = btrfs_next_leaf(root, path);
-			if (ret < 0)
+			if (ret < 0) {
+				if (cow_start != (u64)-1)
+					cur_offset = cow_start;
 				goto error;
+			}
 			if (ret > 0)
 				break;
 			leaf = path->nodes[0];

[PATCH 3.18 14/58] Btrfs: fix crash due to not cleaning up tree log blocks dirty bits

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.li.liu@oracle.com>

commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream.

In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,

umount
 -> close_ctree
    -> stop workers
    -> iput(btree_inode)
       -> iput_final
          -> write_inode_now
	     -> ...
	       -> queue job on stop'd workers

cc: <stable@vger.kernel.org> v3.12+
Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2201,6 +2201,9 @@ static noinline int walk_down_log_tree(s
 					clean_tree_block(trans, root, next);
 					btrfs_wait_tree_block_writeback(next);
 					btrfs_tree_unlock(next);
+				} else {
+					if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+						clear_extent_buffer_dirty(next);
 				}
 
 				WARN_ON(root_owner !=
@@ -2279,6 +2282,9 @@ static noinline int walk_up_log_tree(str
 					clean_tree_block(trans, root, next);
 					btrfs_wait_tree_block_writeback(next);
 					btrfs_tree_unlock(next);
+				} else {
+					if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+						clear_extent_buffer_dirty(next);
 				}
 
 				WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
@@ -2355,6 +2361,9 @@ static int walk_log_tree(struct btrfs_tr
 				clean_tree_block(trans, log, next);
 				btrfs_wait_tree_block_writeback(next);
 				btrfs_tree_unlock(next);
+			} else {
+				if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+					clear_extent_buffer_dirty(next);
 			}
 
 			WARN_ON(log->root_key.objectid !=

[PATCH 3.18 15/58] ALSA: seq: Fix racy pool initializations

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit d15d662e89fc667b90cd294b0eb45694e33144da upstream.

ALSA sequencer core initializes the event pool on demand by invoking
snd_seq_pool_init() when the first write happens and the pool is
empty.  Meanwhile user can reset the pool size manually via ioctl
concurrently, and this may lead to UAF or out-of-bound accesses since
the function tries to vmalloc / vfree the buffer.

A simple fix is to just wrap the snd_seq_pool_init() call with the
recently introduced client->ioctl_mutex; as the calls for
snd_seq_pool_init() from other side are always protected with this
mutex, we can avoid the race.

Reported-by: 范龙飞 <long7573@126.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_clientmgr.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -1012,7 +1012,7 @@ static ssize_t snd_seq_write(struct file
 {
 	struct snd_seq_client *client = file->private_data;
 	int written = 0, len;
-	int err = -EINVAL;
+	int err;
 	struct snd_seq_event event;
 
 	if (!(snd_seq_file_flags(file) & SNDRV_SEQ_LFLG_OUTPUT))
@@ -1027,11 +1027,15 @@ static ssize_t snd_seq_write(struct file
 
 	/* allocate the pool now if the pool is not allocated yet */ 
 	if (client->pool->size > 0 && !snd_seq_write_pool_allocated(client)) {
-		if (snd_seq_pool_init(client->pool) < 0)
+		mutex_lock(&client->ioctl_mutex);
+		err = snd_seq_pool_init(client->pool);
+		mutex_unlock(&client->ioctl_mutex);
+		if (err < 0)
 			return -ENOMEM;
 	}
 
 	/* only process whole events */
+	err = -EINVAL;
 	while (count >= sizeof(struct snd_seq_event)) {
 		/* Read in the event header from the user */
 		len = sizeof(event);

[PATCH 3.18 16/58] ARM: dts: s5pv210: add interrupt-parent for ohci

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.

The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:

arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000

As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/s5pv210.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -461,6 +461,7 @@
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0xec300000 0x100>;
 			interrupts = <23>;
+			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
 			#address-cells = <1>;

[PATCH 3.18 17/58] media: r820t: fix r820t_write_reg for KASAN

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.

With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:

drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/tuners/r820t.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -410,9 +410,11 @@ static int r820t_write(struct r820t_priv
 	return 0;
 }
 
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
 {
-	return r820t_write(priv, reg, &val, 1);
+	u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+	return r820t_write(priv, reg, &tmp, 1);
 }
 
 static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -425,17 +427,18 @@ static int r820t_read_cache_reg(struct r
 		return -EINVAL;
 }
 
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
 				u8 bit_mask)
 {
+	u8 tmp = val;
 	int rc = r820t_read_cache_reg(priv, reg);
 
 	if (rc < 0)
 		return rc;
 
-	val = (rc & ~bit_mask) | (val & bit_mask);
+	tmp = (rc & ~bit_mask) | (tmp & bit_mask);
 
-	return r820t_write(priv, reg, &val, 1);
+	return r820t_write(priv, reg, &tmp, 1);
 }
 
 static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)

[PATCH 3.18 18/58] mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit bb422a738f6566f7439cd347d54e321e4fe92a9f upstream.

Syzbot caught an oops at unregister_shrinker() because combination of
commit 1d3d4437eae1bb29 ("vmscan: per-node deferred work") and fault
injection made register_shrinker() fail and the caller of
register_shrinker() did not check for failure.

----------
[  554.881422] FAULT_INJECTION: forcing a failure.
[  554.881422] name failslab, interval 1, probability 0, space 0, times 0
[  554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.881445] Call Trace:
[  554.881459]  dump_stack+0x194/0x257
[  554.881474]  ? arch_local_irq_restore+0x53/0x53
[  554.881486]  ? find_held_lock+0x35/0x1d0
[  554.881507]  should_fail+0x8c0/0xa40
[  554.881522]  ? fault_create_debugfs_attr+0x1f0/0x1f0
[  554.881537]  ? check_noncircular+0x20/0x20
[  554.881546]  ? find_next_zero_bit+0x2c/0x40
[  554.881560]  ? ida_get_new_above+0x421/0x9d0
[  554.881577]  ? find_held_lock+0x35/0x1d0
[  554.881594]  ? __lock_is_held+0xb6/0x140
[  554.881628]  ? check_same_owner+0x320/0x320
[  554.881634]  ? lock_downgrade+0x990/0x990
[  554.881649]  ? find_held_lock+0x35/0x1d0
[  554.881672]  should_failslab+0xec/0x120
[  554.881684]  __kmalloc+0x63/0x760
[  554.881692]  ? lock_downgrade+0x990/0x990
[  554.881712]  ? register_shrinker+0x10e/0x2d0
[  554.881721]  ? trace_event_raw_event_module_request+0x320/0x320
[  554.881737]  register_shrinker+0x10e/0x2d0
[  554.881747]  ? prepare_kswapd_sleep+0x1f0/0x1f0
[  554.881755]  ? _down_write_nest_lock+0x120/0x120
[  554.881765]  ? memcpy+0x45/0x50
[  554.881785]  sget_userns+0xbcd/0xe20
(...snipped...)
[  554.898693] kasan: CONFIG_KASAN_INLINE enabled
[  554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  554.898732] general protection fault: 0000 [#1] SMP KASAN
[  554.898737] Dumping ftrace buffer:
[  554.898741]    (ftrace buffer empty)
[  554.898743] Modules linked in:
[  554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82
[  554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[  554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000
[  554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150
[  554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246
[  554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0
[  554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004
[  554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000
[  554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98
[  554.898800] FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
[  554.898804] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[  554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0
[  554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
[  554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[  554.898818] Call Trace:
[  554.898828]  unregister_shrinker+0x79/0x300
[  554.898837]  ? perf_trace_mm_vmscan_writepage+0x750/0x750
[  554.898844]  ? down_write+0x87/0x120
[  554.898851]  ? deactivate_super+0x139/0x1b0
[  554.898857]  ? down_read+0x150/0x150
[  554.898864]  ? check_same_owner+0x320/0x320
[  554.898875]  deactivate_locked_super+0x64/0xd0
[  554.898883]  deactivate_super+0x141/0x1b0
----------

Since allowing register_shrinker() callers to call unregister_shrinker()
when register_shrinker() failed can simplify error recovery path, this
patch makes unregister_shrinker() no-op when register_shrinker() failed.
Also, reset shrinker->nr_deferred in case unregister_shrinker() was
by error called twice.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Glauber Costa <glauber@scylladb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmscan.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -220,10 +220,13 @@ EXPORT_SYMBOL(register_shrinker);
  */
 void unregister_shrinker(struct shrinker *shrinker)
 {
+	if (!shrinker->nr_deferred)
+		return;
 	down_write(&shrinker_rwsem);
 	list_del(&shrinker->list);
 	up_write(&shrinker_rwsem);
 	kfree(shrinker->nr_deferred);
+	shrinker->nr_deferred = NULL;
 }
 EXPORT_SYMBOL(unregister_shrinker);
 

[PATCH 3.18 19/58] xfrm: check id proto in validate_tmpl()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 6a53b7593233ab9e4f96873ebacc0f653a55c3e1 upstream.

syzbot reported a kernel warning in xfrm_state_fini(), which
indicates that we have entries left in the list
net->xfrm.state_all whose proto is zero. And
xfrm_id_proto_match() doesn't consider them as a match with
IPSEC_PROTO_ANY in this case.

Proto with value 0 is probably not a valid value, at least
verify_newsa_info() doesn't consider it valid either.

This patch fixes it by checking the proto value in
validate_tmpl() and rejecting invalid ones, like what iproute2
does in xfrm_xfrmproto_getbyname().

Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/xfrm/xfrm_user.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1375,6 +1375,21 @@ static int validate_tmpl(int nr, struct
 		default:
 			return -EINVAL;
 		}
+
+		switch (ut[i].id.proto) {
+		case IPPROTO_AH:
+		case IPPROTO_ESP:
+		case IPPROTO_COMP:
+#if IS_ENABLED(CONFIG_IPV6)
+		case IPPROTO_ROUTING:
+		case IPPROTO_DSTOPTS:
+#endif
+		case IPSEC_PROTO_ANY:
+			break;
+		default:
+			return -EINVAL;
+		}
+
 	}
 
 	return 0;

[PATCH 3.18 20/58] selinux: skip bounded transition processing if the policy isnt loaded

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Moore <paul@paul-moore.com>

commit 4b14752ec4e0d87126e636384cf37c8dd9df157c upstream.

We can't do anything reasonable in security_bounded_transition() if we
don't have a policy loaded, and in fact we could run into problems
with some of the code inside expecting a policy.  Fix these problems
like we do many others in security/selinux/ss/services.c by checking
to see if the policy is loaded (ss_initialized) and returning quickly
if it isn't.

Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/ss/services.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -823,6 +823,9 @@ int security_bounded_transition(u32 old_
 	int index;
 	int rc;
 
+	if (!ss_initialized)
+		return 0;
+
 	read_lock(&policy_rwlock);
 
 	rc = -EINVAL;

[PATCH 3.18 21/58] crypto: x86/twofish-3way - Fix %rbp usage

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit d8c7fe9f2a486a6e5f0d5229ca43807af5ab22c6 upstream.

Using %rbp as a temporary register breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.

In twofish-3way, we can't simply replace %rbp with another register
because there are none available.  Instead, we use the stack to hold the
values that %rbp, %r11, and %r12 were holding previously.  Each of these
values represents the half of the output from the previous Feistel round
that is being passed on unchanged to the following round.  They are only
used once per round, when they are exchanged with %rax, %rbx, and %rcx.

As a result, we free up 3 registers (one per block) and can reassign
them so that %rbp is not used, and additionally %r14 and %r15 are not
used so they do not need to be saved/restored.

There may be a small overhead caused by replacing 'xchg REG, REG' with
the needed sequence 'mov MEM, REG; mov REG, MEM; mov REG, REG' once per
round.  But, counterintuitively, when I tested "ctr-twofish-3way" on a
Haswell processor, the new version was actually about 2% faster.
(Perhaps 'xchg' is not as well optimized as plain moves.)

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/twofish-x86_64-asm_64-3way.S |  118 ++++++++++++++-------------
 1 file changed, 63 insertions(+), 55 deletions(-)

--- a/arch/x86/crypto/twofish-x86_64-asm_64-3way.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64-3way.S
@@ -55,29 +55,31 @@
 #define RAB1bl %bl
 #define RAB2bl %cl
 
+#define CD0 0x0(%rsp)
+#define CD1 0x8(%rsp)
+#define CD2 0x10(%rsp)
+
+# used only before/after all rounds
 #define RCD0 %r8
 #define RCD1 %r9
 #define RCD2 %r10
 
-#define RCD0d %r8d
-#define RCD1d %r9d
-#define RCD2d %r10d
-
-#define RX0 %rbp
-#define RX1 %r11
-#define RX2 %r12
-
-#define RX0d %ebp
-#define RX1d %r11d
-#define RX2d %r12d
-
-#define RY0 %r13
-#define RY1 %r14
-#define RY2 %r15
-
-#define RY0d %r13d
-#define RY1d %r14d
-#define RY2d %r15d
+# used only during rounds
+#define RX0 %r8
+#define RX1 %r9
+#define RX2 %r10
+
+#define RX0d %r8d
+#define RX1d %r9d
+#define RX2d %r10d
+
+#define RY0 %r11
+#define RY1 %r12
+#define RY2 %r13
+
+#define RY0d %r11d
+#define RY1d %r12d
+#define RY2d %r13d
 
 #define RT0 %rdx
 #define RT1 %rsi
@@ -85,6 +87,8 @@
 #define RT0d %edx
 #define RT1d %esi
 
+#define RT1bl %sil
+
 #define do16bit_ror(rot, op1, op2, T0, T1, tmp1, tmp2, ab, dst) \
 	movzbl ab ## bl,		tmp2 ## d; \
 	movzbl ab ## bh,		tmp1 ## d; \
@@ -92,6 +96,11 @@
 	op1##l T0(CTX, tmp2, 4),	dst ## d; \
 	op2##l T1(CTX, tmp1, 4),	dst ## d;
 
+#define swap_ab_with_cd(ab, cd, tmp)	\
+	movq cd, tmp;			\
+	movq ab, cd;			\
+	movq tmp, ab;
+
 /*
  * Combined G1 & G2 function. Reordered with help of rotates to have moves
  * at begining.
@@ -110,15 +119,15 @@
 	/* G1,2 && G2,2 */ \
 	do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 0, x ## 0); \
 	do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 0, y ## 0); \
-	xchgq cd ## 0, ab ## 0; \
+	swap_ab_with_cd(ab ## 0, cd ## 0, RT0); \
 	\
 	do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 1, x ## 1); \
 	do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 1, y ## 1); \
-	xchgq cd ## 1, ab ## 1; \
+	swap_ab_with_cd(ab ## 1, cd ## 1, RT0); \
 	\
 	do16bit_ror(32, xor, xor, Tx2, Tx3, RT0, RT1, ab ## 2, x ## 2); \
 	do16bit_ror(16, xor, xor, Ty3, Ty0, RT0, RT1, ab ## 2, y ## 2); \
-	xchgq cd ## 2, ab ## 2;
+	swap_ab_with_cd(ab ## 2, cd ## 2, RT0);
 
 #define enc_round_end(ab, x, y, n) \
 	addl y ## d,			x ## d; \
@@ -168,6 +177,16 @@
 	decrypt_round3(ba, dc, (n*2)+1); \
 	decrypt_round3(ba, dc, (n*2));
 
+#define push_cd()	\
+	pushq RCD2;	\
+	pushq RCD1;	\
+	pushq RCD0;
+
+#define pop_cd()	\
+	popq RCD0;	\
+	popq RCD1;	\
+	popq RCD2;
+
 #define inpack3(in, n, xy, m) \
 	movq 4*(n)(in),			xy ## 0; \
 	xorq w+4*m(CTX),		xy ## 0; \
@@ -223,11 +242,8 @@ ENTRY(__twofish_enc_blk_3way)
 	 *	%rdx: src, RIO
 	 *	%rcx: bool, if true: xor output
 	 */
-	pushq %r15;
-	pushq %r14;
 	pushq %r13;
 	pushq %r12;
-	pushq %rbp;
 	pushq %rbx;
 
 	pushq %rcx; /* bool xor */
@@ -235,40 +251,36 @@ ENTRY(__twofish_enc_blk_3way)
 
 	inpack_enc3();
 
-	encrypt_cycle3(RAB, RCD, 0);
-	encrypt_cycle3(RAB, RCD, 1);
-	encrypt_cycle3(RAB, RCD, 2);
-	encrypt_cycle3(RAB, RCD, 3);
-	encrypt_cycle3(RAB, RCD, 4);
-	encrypt_cycle3(RAB, RCD, 5);
-	encrypt_cycle3(RAB, RCD, 6);
-	encrypt_cycle3(RAB, RCD, 7);
+	push_cd();
+	encrypt_cycle3(RAB, CD, 0);
+	encrypt_cycle3(RAB, CD, 1);
+	encrypt_cycle3(RAB, CD, 2);
+	encrypt_cycle3(RAB, CD, 3);
+	encrypt_cycle3(RAB, CD, 4);
+	encrypt_cycle3(RAB, CD, 5);
+	encrypt_cycle3(RAB, CD, 6);
+	encrypt_cycle3(RAB, CD, 7);
+	pop_cd();
 
 	popq RIO; /* dst */
-	popq %rbp; /* bool xor */
+	popq RT1; /* bool xor */
 
-	testb %bpl, %bpl;
+	testb RT1bl, RT1bl;
 	jnz .L__enc_xor3;
 
 	outunpack_enc3(mov);
 
 	popq %rbx;
-	popq %rbp;
 	popq %r12;
 	popq %r13;
-	popq %r14;
-	popq %r15;
 	ret;
 
 .L__enc_xor3:
 	outunpack_enc3(xor);
 
 	popq %rbx;
-	popq %rbp;
 	popq %r12;
 	popq %r13;
-	popq %r14;
-	popq %r15;
 	ret;
 ENDPROC(__twofish_enc_blk_3way)
 
@@ -278,35 +290,31 @@ ENTRY(twofish_dec_blk_3way)
 	 *	%rsi: dst
 	 *	%rdx: src, RIO
 	 */
-	pushq %r15;
-	pushq %r14;
 	pushq %r13;
 	pushq %r12;
-	pushq %rbp;
 	pushq %rbx;
 
 	pushq %rsi; /* dst */
 
 	inpack_dec3();
 
-	decrypt_cycle3(RAB, RCD, 7);
-	decrypt_cycle3(RAB, RCD, 6);
-	decrypt_cycle3(RAB, RCD, 5);
-	decrypt_cycle3(RAB, RCD, 4);
-	decrypt_cycle3(RAB, RCD, 3);
-	decrypt_cycle3(RAB, RCD, 2);
-	decrypt_cycle3(RAB, RCD, 1);
-	decrypt_cycle3(RAB, RCD, 0);
+	push_cd();
+	decrypt_cycle3(RAB, CD, 7);
+	decrypt_cycle3(RAB, CD, 6);
+	decrypt_cycle3(RAB, CD, 5);
+	decrypt_cycle3(RAB, CD, 4);
+	decrypt_cycle3(RAB, CD, 3);
+	decrypt_cycle3(RAB, CD, 2);
+	decrypt_cycle3(RAB, CD, 1);
+	decrypt_cycle3(RAB, CD, 0);
+	pop_cd();
 
 	popq RIO; /* dst */
 
 	outunpack_dec3();
 
 	popq %rbx;
-	popq %rbp;
 	popq %r12;
 	popq %r13;
-	popq %r14;
-	popq %r15;
 	ret;
 ENDPROC(twofish_dec_blk_3way)

[PATCH 3.18 22/58] staging: android: ion: Add __GFP_NOWARN for system contig heap

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laura Abbott <labbott@redhat.com>

commit 0c75f10312a35b149b2cebb1832316b35c2337ca upstream.

syzbot reported a warning from Ion:

  WARNING: CPU: 1 PID: 3485 at mm/page_alloc.c:3926

  ...
   __alloc_pages_nodemask+0x9fb/0xd80 mm/page_alloc.c:4252
  alloc_pages_current+0xb6/0x1e0 mm/mempolicy.c:2036
  alloc_pages include/linux/gfp.h:492 [inline]
  ion_system_contig_heap_allocate+0x40/0x2c0
  drivers/staging/android/ion/ion_system_heap.c:374
  ion_buffer_create drivers/staging/android/ion/ion.c:93 [inline]
  ion_alloc+0x2c1/0x9e0 drivers/staging/android/ion/ion.c:420
  ion_ioctl+0x26d/0x380 drivers/staging/android/ion/ion-ioctl.c:84
  vfs_ioctl fs/ioctl.c:46 [inline]
  do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
  SYSC_ioctl fs/ioctl.c:701 [inline]
  SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692

This is a warning about attempting to allocate order > MAX_ORDER. This
is coming from a userspace Ion allocation request. Since userspace is
free to request however much memory it wants (and the kernel is free to
deny its allocation), silence the allocation attempt with __GFP_NOWARN
in case it fails.

Reported-by: syzbot+76e7efc4748495855a4d@syzkaller.appspotmail.com
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ion/ion_system_heap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/android/ion/ion_system_heap.c
+++ b/drivers/staging/android/ion/ion_system_heap.c
@@ -321,7 +321,7 @@ static int ion_system_contig_heap_alloca
 	if (align > (PAGE_SIZE << order))
 		return -EINVAL;
 
-	page = alloc_pages(low_order_gfp_flags, order);
+	page = alloc_pages(low_order_gfp_flags | __GFP_NOWARN, order);
 	if (!page)
 		return -ENOMEM;
 

[PATCH 3.18 23/58] netfilter: x_tables: fix int overflow in xt_alloc_table_info()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Vyukov <dvyukov@google.com>

commit 889c604fd0b5f6d3b8694ade229ee44124de1127 upstream.

syzkaller triggered OOM kills by passing ipt_replace.size = -1
to IPT_SO_SET_REPLACE. The root cause is that SMP_ALIGN() in
xt_alloc_table_info() causes int overflow and the size check passes
when it should not. SMP_ALIGN() is no longer needed leftover.

Remove SMP_ALIGN() call in xt_alloc_table_info().

Reported-by: syzbot+4396883fa8c4f64e0175@syzkaller.appspotmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/x_tables.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -38,8 +38,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
 MODULE_DESCRIPTION("{ip,ip6,arp,eb}_tables backend module");
 
-#define SMP_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
-
 struct compat_delta {
 	unsigned int offset; /* offset in kernel */
 	int delta; /* delta in 32bit user land */
@@ -951,7 +949,7 @@ struct xt_table_info *xt_alloc_table_inf
 	int cpu;
 
 	/* Pedantry: prevent them from hitting BUG() in vmalloc.c --RR */
-	if ((SMP_ALIGN(size) >> PAGE_SHIFT) + 2 > totalram_pages)
+	if ((size >> PAGE_SHIFT) + 2 > totalram_pages)
 		return NULL;
 
 	newinfo = kzalloc(XT_TABLE_INFO_SZ, GFP_KERNEL);

[PATCH 3.18 24/58] netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit da17c73b6eb74aad3c3c0654394635675b623b3e upstream.

It looks like syzbot found its way into netfilter territory.

Issue here is that @name comes from user space and might
not be null terminated.

Out-of-bound reads happen, KASAN is not happy.

v2 added similar fix for xt_request_find_target(),
as Florian advised.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/x_tables.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -209,6 +209,9 @@ xt_request_find_match(uint8_t nfproto, c
 {
 	struct xt_match *match;
 
+	if (strnlen(name, XT_EXTENSION_MAXNAMELEN) == XT_EXTENSION_MAXNAMELEN)
+		return ERR_PTR(-EINVAL);
+
 	match = xt_find_match(nfproto, name, revision);
 	if (IS_ERR(match)) {
 		request_module("%st_%s", xt_prefix[nfproto], name);
@@ -251,6 +254,9 @@ struct xt_target *xt_request_find_target
 {
 	struct xt_target *target;
 
+	if (strnlen(name, XT_EXTENSION_MAXNAMELEN) == XT_EXTENSION_MAXNAMELEN)
+		return ERR_PTR(-EINVAL);
+
 	target = xt_find_target(af, name, revision);
 	if (IS_ERR(target)) {
 		request_module("%st_%s", xt_prefix[af], name);

[PATCH 3.18 25/58] netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Vyukov <dvyukov@google.com>

commit 1a38956cce5eabd7b74f94bab70265e4df83165e upstream.

Commit 136e92bbec0a switched local_nodes from an array to a bitmask
but did not add proper bounds checks. As the result
clusterip_config_init_nodelist() can both over-read
ipt_clusterip_tgt_info.local_nodes and over-write
clusterip_config.local_nodes.

Add bounds checks for both.

Fixes: 136e92bbec0a ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/netfilter/ipt_CLUSTERIP.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -365,7 +365,7 @@ static int clusterip_tg_check(const stru
 	struct ipt_clusterip_tgt_info *cipinfo = par->targinfo;
 	const struct ipt_entry *e = par->entryinfo;
 	struct clusterip_config *config;
-	int ret;
+	int ret, i;
 
 	if (cipinfo->hash_mode != CLUSTERIP_HASHMODE_SIP &&
 	    cipinfo->hash_mode != CLUSTERIP_HASHMODE_SIP_SPT &&
@@ -379,8 +379,18 @@ static int clusterip_tg_check(const stru
 		pr_info("Please specify destination IP\n");
 		return -EINVAL;
 	}
-
-	/* FIXME: further sanity checks */
+	if (cipinfo->num_local_nodes > ARRAY_SIZE(cipinfo->local_nodes)) {
+		pr_info("bad num_local_nodes %u\n", cipinfo->num_local_nodes);
+		return -EINVAL;
+	}
+	for (i = 0; i < cipinfo->num_local_nodes; i++) {
+		if (cipinfo->local_nodes[i] - 1 >=
+		    sizeof(config->local_nodes) * 8) {
+			pr_info("bad local_nodes[%d] %u\n",
+				i, cipinfo->local_nodes[i]);
+			return -EINVAL;
+		}
+	}
 
 	config = clusterip_config_find_get(par->net, e->ip.dst.s_addr, 1);
 	if (!config) {

[PATCH 3.18 26/58] netfilter: on sockopt() acquire sock lock only in the required scope

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 3f34cfae1238848fd53f25e5c8fd59da57901f4b upstream.

Syzbot reported several deadlocks in the netfilter area caused by
rtnl lock and socket lock being acquired with a different order on
different code paths, leading to backtraces like the following one:

======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc9+ #212 Not tainted
------------------------------------------------------
syzkaller041579/3682 is trying to acquire lock:
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock
include/net/sock.h:1463 [inline]
  (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167

but task is already holding lock:
  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}:
        __mutex_lock_common kernel/locking/mutex.c:756 [inline]
        __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
        mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
        rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
        register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607
        tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106
        xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845
        check_target net/ipv6/netfilter/ip6_tables.c:538 [inline]
        find_check_entry.isra.7+0x935/0xcf0
net/ipv6/netfilter/ip6_tables.c:580
        translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749
        do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline]
        do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691
        nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
        nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
        ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

-> #0 (sk_lock-AF_INET6){+.+.}:
        lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914
        lock_sock_nested+0xc2/0x110 net/core/sock.c:2780
        lock_sock include/net/sock.h:1463 [inline]
        do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
        ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922
        udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
        sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
        SYSC_setsockopt net/socket.c:1849 [inline]
        SyS_setsockopt+0x189/0x360 net/socket.c:1828
        entry_SYSCALL_64_fastpath+0x29/0xa0

other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(rtnl_mutex);
                                lock(sk_lock-AF_INET6);
                                lock(rtnl_mutex);
   lock(sk_lock-AF_INET6);

  *** DEADLOCK ***

1 lock held by syzkaller041579/3682:
  #0:  (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74

The problem, as Florian noted, is that nf_setsockopt() is always
called with the socket held, even if the lock itself is required only
for very tight scopes and only for some operation.

This patch addresses the issues moving the lock_sock() call only
where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt()
does not need anymore to acquire both locks.

Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/ip_sockglue.c                         |   14 ++++----------
 net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c |    6 +++++-
 net/ipv6/ipv6_sockglue.c                       |   17 +++++------------
 net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c |   18 ++++++++++++------
 4 files changed, 26 insertions(+), 29 deletions(-)

--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1090,11 +1090,8 @@ int ip_setsockopt(struct sock *sk, int l
 	if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
 			optname != IP_IPSEC_POLICY &&
 			optname != IP_XFRM_POLICY &&
-			!ip_mroute_opt(optname)) {
-		lock_sock(sk);
+			!ip_mroute_opt(optname))
 		err = nf_setsockopt(sk, PF_INET, optname, optval, optlen);
-		release_sock(sk);
-	}
 #endif
 	return err;
 }
@@ -1119,12 +1116,9 @@ int compat_ip_setsockopt(struct sock *sk
 	if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
 			optname != IP_IPSEC_POLICY &&
 			optname != IP_XFRM_POLICY &&
-			!ip_mroute_opt(optname)) {
-		lock_sock(sk);
-		err = compat_nf_setsockopt(sk, PF_INET, optname,
-					   optval, optlen);
-		release_sock(sk);
-	}
+			!ip_mroute_opt(optname))
+		err = compat_nf_setsockopt(sk, PF_INET, optname, optval,
+					   optlen);
 #endif
 	return err;
 }
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -269,15 +269,19 @@ getorigdst(struct sock *sk, int optval,
 	struct nf_conntrack_tuple tuple;
 
 	memset(&tuple, 0, sizeof(tuple));
+
+	lock_sock(sk);
 	tuple.src.u3.ip = inet->inet_rcv_saddr;
 	tuple.src.u.tcp.port = inet->inet_sport;
 	tuple.dst.u3.ip = inet->inet_daddr;
 	tuple.dst.u.tcp.port = inet->inet_dport;
 	tuple.src.l3num = PF_INET;
 	tuple.dst.protonum = sk->sk_protocol;
+	release_sock(sk);
 
 	/* We only do TCP and SCTP at the moment: is there a better way? */
-	if (sk->sk_protocol != IPPROTO_TCP && sk->sk_protocol != IPPROTO_SCTP) {
+	if (tuple.dst.protonum != IPPROTO_TCP &&
+	    tuple.dst.protonum != IPPROTO_SCTP) {
 		pr_debug("SO_ORIGINAL_DST: Not a TCP/SCTP socket\n");
 		return -ENOPROTOOPT;
 	}
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -875,12 +875,8 @@ int ipv6_setsockopt(struct sock *sk, int
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
 	if (err == -ENOPROTOOPT && optname != IPV6_IPSEC_POLICY &&
-			optname != IPV6_XFRM_POLICY) {
-		lock_sock(sk);
-		err = nf_setsockopt(sk, PF_INET6, optname, optval,
-				optlen);
-		release_sock(sk);
-	}
+			optname != IPV6_XFRM_POLICY)
+		err = nf_setsockopt(sk, PF_INET6, optname, optval, optlen);
 #endif
 	return err;
 }
@@ -910,12 +906,9 @@ int compat_ipv6_setsockopt(struct sock *
 #ifdef CONFIG_NETFILTER
 	/* we need to exclude all possible ENOPROTOOPTs except default case */
 	if (err == -ENOPROTOOPT && optname != IPV6_IPSEC_POLICY &&
-	    optname != IPV6_XFRM_POLICY) {
-		lock_sock(sk);
-		err = compat_nf_setsockopt(sk, PF_INET6, optname,
-					   optval, optlen);
-		release_sock(sk);
-	}
+	    optname != IPV6_XFRM_POLICY)
+		err = compat_nf_setsockopt(sk, PF_INET6, optname, optval,
+					   optlen);
 #endif
 	return err;
 }
--- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
@@ -240,20 +240,27 @@ static struct nf_hook_ops ipv6_conntrack
 static int
 ipv6_getorigdst(struct sock *sk, int optval, void __user *user, int *len)
 {
-	const struct inet_sock *inet = inet_sk(sk);
+	struct nf_conntrack_tuple tuple = { .src.l3num = NFPROTO_IPV6 };
 	const struct ipv6_pinfo *inet6 = inet6_sk(sk);
+	const struct inet_sock *inet = inet_sk(sk);
 	const struct nf_conntrack_tuple_hash *h;
 	struct sockaddr_in6 sin6;
-	struct nf_conntrack_tuple tuple = { .src.l3num = NFPROTO_IPV6 };
 	struct nf_conn *ct;
+	__be32 flow_label;
+	int bound_dev_if;
 
+	lock_sock(sk);
 	tuple.src.u3.in6 = sk->sk_v6_rcv_saddr;
 	tuple.src.u.tcp.port = inet->inet_sport;
 	tuple.dst.u3.in6 = sk->sk_v6_daddr;
 	tuple.dst.u.tcp.port = inet->inet_dport;
 	tuple.dst.protonum = sk->sk_protocol;
+	bound_dev_if = sk->sk_bound_dev_if;
+	flow_label = inet6->flow_label;
+	release_sock(sk);
 
-	if (sk->sk_protocol != IPPROTO_TCP && sk->sk_protocol != IPPROTO_SCTP)
+	if (tuple.dst.protonum != IPPROTO_TCP &&
+	    tuple.dst.protonum != IPPROTO_SCTP)
 		return -ENOPROTOOPT;
 
 	if (*len < 0 || (unsigned int) *len < sizeof(sin6))
@@ -271,14 +278,13 @@ ipv6_getorigdst(struct sock *sk, int opt
 
 	sin6.sin6_family = AF_INET6;
 	sin6.sin6_port = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u.tcp.port;
-	sin6.sin6_flowinfo = inet6->flow_label & IPV6_FLOWINFO_MASK;
+	sin6.sin6_flowinfo = flow_label & IPV6_FLOWINFO_MASK;
 	memcpy(&sin6.sin6_addr,
 		&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.in6,
 					sizeof(sin6.sin6_addr));
 
 	nf_ct_put(ct);
-	sin6.sin6_scope_id = ipv6_iface_scope_id(&sin6.sin6_addr,
-						 sk->sk_bound_dev_if);
+	sin6.sin6_scope_id = ipv6_iface_scope_id(&sin6.sin6_addr, bound_dev_if);
 	return copy_to_user(user, &sin6, sizeof(sin6)) ? -EFAULT : 0;
 }
 

[PATCH 3.18 27/58] netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 7dc68e98757a8eccf8ca7a53a29b896f1eef1f76 upstream.

rateest_hash is supposed to be protected by xt_rateest_mutex,
and, as suggested by Eric, lookup and insert should be atomic,
so we should acquire the xt_rateest_mutex once for both.

So introduce a non-locking helper for internal use and keep the
locking one for external.

Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com>
Fixes: 5859034d7eb8 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_RATEEST.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/net/netfilter/xt_RATEEST.c
+++ b/net/netfilter/xt_RATEEST.c
@@ -40,23 +40,31 @@ static void xt_rateest_hash_insert(struc
 	hlist_add_head(&est->list, &rateest_hash[h]);
 }
 
-struct xt_rateest *xt_rateest_lookup(const char *name)
+static struct xt_rateest *__xt_rateest_lookup(const char *name)
 {
 	struct xt_rateest *est;
 	unsigned int h;
 
 	h = xt_rateest_hash(name);
-	mutex_lock(&xt_rateest_mutex);
 	hlist_for_each_entry(est, &rateest_hash[h], list) {
 		if (strcmp(est->name, name) == 0) {
 			est->refcnt++;
-			mutex_unlock(&xt_rateest_mutex);
 			return est;
 		}
 	}
-	mutex_unlock(&xt_rateest_mutex);
+
 	return NULL;
 }
+
+struct xt_rateest *xt_rateest_lookup(const char *name)
+{
+	struct xt_rateest *est;
+
+	mutex_lock(&xt_rateest_mutex);
+	est = __xt_rateest_lookup(name);
+	mutex_unlock(&xt_rateest_mutex);
+	return est;
+}
 EXPORT_SYMBOL_GPL(xt_rateest_lookup);
 
 void xt_rateest_put(struct xt_rateest *est)
@@ -104,8 +112,10 @@ static int xt_rateest_tg_checkentry(cons
 		rnd_inited = true;
 	}
 
-	est = xt_rateest_lookup(info->name);
+	mutex_lock(&xt_rateest_mutex);
+	est = __xt_rateest_lookup(info->name);
 	if (est) {
+		mutex_unlock(&xt_rateest_mutex);
 		/*
 		 * If estimator parameters are specified, they must match the
 		 * existing estimator.
@@ -143,11 +153,13 @@ static int xt_rateest_tg_checkentry(cons
 
 	info->est = est;
 	xt_rateest_hash_insert(est);
+	mutex_unlock(&xt_rateest_mutex);
 	return 0;
 
 err2:
 	kfree(est);
 err1:
+	mutex_unlock(&xt_rateest_mutex);
 	return ret;
 }
 

[PATCH 3.18 28/58] net: avoid skb_warn_bad_offload on IS_ERR

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

commit 8d74e9f88d65af8bb2e095aff506aa6eac755ada upstream.

skb_warn_bad_offload warns when packets enter the GSO stack that
require skb_checksum_help or vice versa. Do not warn on arbitrary
bad packets. Packet sockets can craft many. Syzkaller was able to
demonstrate another one with eth_type games.

In particular, suppress the warning when segmentation returns an
error, which is for reasons other than checksum offload.

See also commit 36c92474498a ("net: WARN if skb_checksum_help() is
called on skb requiring segmentation") for context on this warning.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2478,7 +2478,7 @@ struct sk_buff *__skb_gso_segment(struct
 
 	segs = skb_mac_gso_segment(skb, features);
 
-	if (unlikely(skb_needs_check(skb, tx_path)))
+	if (unlikely(skb_needs_check(skb, tx_path) && !IS_ERR(segs)))
 		skb_warn_bad_offload(skb);
 
 	return segs;

[PATCH 3.18 29/58] Provide a function to create a NUL-terminated string from unterminated data

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit f35157417215ec138c920320c746fdb3e04ef1d5 upstream.

Provide a function, kmemdup_nul(), that will create a NUL-terminated string
from an unterminated character array where the length is known in advance.

This is better than kstrndup() in situations where we already know the
string length as the strnlen() in kstrndup() is superfluous.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/string.h |    1 +
 mm/util.c              |   24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -121,6 +121,7 @@ void *memchr_inv(const void *s, int c, s
 extern char *kstrdup(const char *s, gfp_t gfp);
 extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
 extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
+extern char *kmemdup_nul(const char *s, size_t len, gfp_t gfp);
 
 extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
 extern void argv_free(char **argv);
--- a/mm/util.c
+++ b/mm/util.c
@@ -42,6 +42,8 @@ EXPORT_SYMBOL(kstrdup);
  * @s: the string to duplicate
  * @max: read at most @max chars from @s
  * @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ *
+ * Note: Use kmemdup_nul() instead if the size is known exactly.
  */
 char *kstrndup(const char *s, size_t max, gfp_t gfp)
 {
@@ -80,6 +82,28 @@ void *kmemdup(const void *src, size_t le
 EXPORT_SYMBOL(kmemdup);
 
 /**
+ * kmemdup_nul - Create a NUL-terminated string from unterminated data
+ * @s: The data to stringify
+ * @len: The size of the data
+ * @gfp: the GFP mask used in the kmalloc() call when allocating memory
+ */
+char *kmemdup_nul(const char *s, size_t len, gfp_t gfp)
+{
+	char *buf;
+
+	if (!s)
+		return NULL;
+
+	buf = kmalloc_track_caller(len + 1, gfp);
+	if (buf) {
+		memcpy(buf, s, len);
+		buf[len] = '\0';
+	}
+	return buf;
+}
+EXPORT_SYMBOL(kmemdup_nul);
+
+/**
  * memdup_user - duplicate memory region from user space
  *
  * @src: source address in user space

[PATCH 3.18 30/58] selinux: ensure the context is NUL terminated in security_context_to_sid_core()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Moore <paul@paul-moore.com>

commit ef28df55ac27e1e5cd122e19fa311d886d47a756 upstream.

The syzbot/syzkaller automated tests found a problem in
security_context_to_sid_core() during early boot (before we load the
SELinux policy) where we could potentially feed context strings without
NUL terminators into the strcmp() function.

We already guard against this during normal operation (after the SELinux
policy has been loaded) by making a copy of the context strings and
explicitly adding a NUL terminator to the end.  The patch extends this
protection to the early boot case (no loaded policy) by moving the context
copy earlier in security_context_to_sid_core().

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-By: William Roberts <william.c.roberts@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/ss/services.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -1239,27 +1239,25 @@ static int security_context_to_sid_core(
 	if (!scontext_len)
 		return -EINVAL;
 
+	/* Copy the string to allow changes and ensure a NUL terminator */
+	scontext2 = kmemdup_nul(scontext, scontext_len, gfp_flags);
+	if (!scontext2)
+		return -ENOMEM;
+
 	if (!ss_initialized) {
 		int i;
 
 		for (i = 1; i < SECINITSID_NUM; i++) {
-			if (!strcmp(initial_sid_to_string[i], scontext)) {
+			if (!strcmp(initial_sid_to_string[i], scontext2)) {
 				*sid = i;
-				return 0;
+				goto out;
 			}
 		}
 		*sid = SECINITSID_KERNEL;
-		return 0;
+		goto out;
 	}
 	*sid = SECSID_NULL;
 
-	/* Copy the string so that we can modify the copy as we parse it. */
-	scontext2 = kmalloc(scontext_len + 1, gfp_flags);
-	if (!scontext2)
-		return -ENOMEM;
-	memcpy(scontext2, scontext, scontext_len);
-	scontext2[scontext_len] = 0;
-
 	if (force) {
 		/* Save another copy for storing in uninterpreted form */
 		rc = -ENOMEM;

[PATCH 3.18 31/58] ASoC: ux500: add MODULE_LICENSE tag

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 1783c9d7cb7bc3181b9271665959b87280d98d8e upstream.

This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500
platform drivers, to avoid these build warnings:

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o

The company no longer exists, so the email addresses of the authors
don't work any more, but I've added them anyway for consistency.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/ux500/mop500.c    |    4 ++++
 sound/soc/ux500/ux500_pcm.c |    5 +++++
 2 files changed, 9 insertions(+)

--- a/sound/soc/ux500/mop500.c
+++ b/sound/soc/ux500/mop500.c
@@ -168,3 +168,7 @@ static struct platform_driver snd_soc_mo
 };
 
 module_platform_driver(snd_soc_mop500_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ASoC MOP500 board driver");
+MODULE_AUTHOR("Ola Lilja");
--- a/sound/soc/ux500/ux500_pcm.c
+++ b/sound/soc/ux500/ux500_pcm.c
@@ -166,3 +166,8 @@ int ux500_pcm_unregister_platform(struct
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ux500_pcm_unregister_platform);
+
+MODULE_AUTHOR("Ola Lilja");
+MODULE_AUTHOR("Roger Nilsson");
+MODULE_DESCRIPTION("ASoC UX500 driver");
+MODULE_LICENSE("GPL v2");

[PATCH 3.18 32/58] video: fbdev/mmp: add MODULE_LICENSE

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit c1530ac5a3ce93a1f02adabc4508b5fbf862dfe2 upstream.

Kbuild complains about the lack of a license tag in this driver:

WARNING: modpost: missing MODULE_LICENSE() in drivers/video/fbdev/mmp/mmp_disp.o

This adds the license, author and description tags.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/mmp/core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/video/fbdev/mmp/core.c
+++ b/drivers/video/fbdev/mmp/core.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <video/mmp_disp.h>
 
 static struct mmp_overlay *path_get_overlay(struct mmp_path *path,
@@ -249,3 +250,7 @@ void mmp_unregister_path(struct mmp_path
 	mutex_unlock(&disp_lock);
 }
 EXPORT_SYMBOL_GPL(mmp_unregister_path);
+
+MODULE_AUTHOR("Zhou Zhu <zzhu3@marvell.com>");
+MODULE_DESCRIPTION("Marvell MMP display framework");
+MODULE_LICENSE("GPL");

[PATCH 3.18 33/58] dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit dfec091439bb2acf763497cfc58f2bdfc67c56b7 upstream.

After commit 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock
only in the required scope"), the caller of nf_{get/set}sockopt() must
not hold any lock, but, in such changeset, I forgot to cope with DECnet.

This commit addresses the issue moving the nf call outside the lock,
in the dn_{get,set}sockopt() with the same schema currently used by
ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main
switch statements, to improve code readability.

Reported-by: Petr Vandrovec <petr@vandrovec.name>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2
Fixes: 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/decnet/af_decnet.c |   62 ++++++++++++++++++++++++++-----------------------
 1 file changed, 33 insertions(+), 29 deletions(-)

--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -1337,6 +1337,12 @@ static int dn_setsockopt(struct socket *
 	lock_sock(sk);
 	err = __dn_setsockopt(sock, level, optname, optval, optlen, 0);
 	release_sock(sk);
+#ifdef CONFIG_NETFILTER
+	/* we need to exclude all possible ENOPROTOOPTs except default case */
+	if (err == -ENOPROTOOPT && optname != DSO_LINKINFO &&
+	    optname != DSO_STREAM && optname != DSO_SEQPACKET)
+		err = nf_setsockopt(sk, PF_DECnet, optname, optval, optlen);
+#endif
 
 	return err;
 }
@@ -1444,15 +1450,6 @@ static int __dn_setsockopt(struct socket
 		dn_nsp_send_disc(sk, 0x38, 0, sk->sk_allocation);
 		break;
 
-	default:
-#ifdef CONFIG_NETFILTER
-		return nf_setsockopt(sk, PF_DECnet, optname, optval, optlen);
-#endif
-	case DSO_LINKINFO:
-	case DSO_STREAM:
-	case DSO_SEQPACKET:
-		return -ENOPROTOOPT;
-
 	case DSO_MAXWINDOW:
 		if (optlen != sizeof(unsigned long))
 			return -EINVAL;
@@ -1500,6 +1497,12 @@ static int __dn_setsockopt(struct socket
 			return -EINVAL;
 		scp->info_loc = u.info;
 		break;
+
+	case DSO_LINKINFO:
+	case DSO_STREAM:
+	case DSO_SEQPACKET:
+	default:
+		return -ENOPROTOOPT;
 	}
 
 	return 0;
@@ -1513,6 +1516,20 @@ static int dn_getsockopt(struct socket *
 	lock_sock(sk);
 	err = __dn_getsockopt(sock, level, optname, optval, optlen, 0);
 	release_sock(sk);
+#ifdef CONFIG_NETFILTER
+	if (err == -ENOPROTOOPT && optname != DSO_STREAM &&
+	    optname != DSO_SEQPACKET && optname != DSO_CONACCEPT &&
+	    optname != DSO_CONREJECT) {
+		int len;
+
+		if (get_user(len, optlen))
+			return -EFAULT;
+
+		err = nf_getsockopt(sk, PF_DECnet, optname, optval, &len);
+		if (err >= 0)
+			err = put_user(len, optlen);
+	}
+#endif
 
 	return err;
 }
@@ -1578,26 +1595,6 @@ static int __dn_getsockopt(struct socket
 		r_data = &link;
 		break;
 
-	default:
-#ifdef CONFIG_NETFILTER
-	{
-		int ret, len;
-
-		if (get_user(len, optlen))
-			return -EFAULT;
-
-		ret = nf_getsockopt(sk, PF_DECnet, optname, optval, &len);
-		if (ret >= 0)
-			ret = put_user(len, optlen);
-		return ret;
-	}
-#endif
-	case DSO_STREAM:
-	case DSO_SEQPACKET:
-	case DSO_CONACCEPT:
-	case DSO_CONREJECT:
-		return -ENOPROTOOPT;
-
 	case DSO_MAXWINDOW:
 		if (r_len > sizeof(unsigned long))
 			r_len = sizeof(unsigned long);
@@ -1629,6 +1626,13 @@ static int __dn_getsockopt(struct socket
 			r_len = sizeof(unsigned char);
 		r_data = &scp->info_rem;
 		break;
+
+	case DSO_STREAM:
+	case DSO_SEQPACKET:
+	case DSO_CONACCEPT:
+	case DSO_CONREJECT:
+	default:
+		return -ENOPROTOOPT;
 	}
 
 	if (r_data) {

[PATCH 3.18 34/58] usbip: keep usbip_device sockfd state in sync with tcp_socket

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan <shuahkh@osg.samsung.com>

commit 009f41aed4b3e11e6dc1e3c07377a10c20f1a5ed upstream.

Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket
is reset to null, reset sockfd to -1 to keep it in sync.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/stub_dev.c |    3 +++
 drivers/usb/usbip/vhci_hcd.c |    2 ++
 2 files changed, 5 insertions(+)

--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -87,6 +87,7 @@ static ssize_t store_sockfd(struct devic
 			goto err;
 
 		sdev->ud.tcp_socket = socket;
+		sdev->ud.sockfd = sockfd;
 
 		spin_unlock_irq(&sdev->ud.lock);
 
@@ -186,6 +187,7 @@ static void stub_shutdown_connection(str
 	if (ud->tcp_socket) {
 		sockfd_put(ud->tcp_socket);
 		ud->tcp_socket = NULL;
+		ud->sockfd = -1;
 	}
 
 	/* 3. free used data */
@@ -280,6 +282,7 @@ static struct stub_device *stub_device_a
 	sdev->ud.status		= SDEV_ST_AVAILABLE;
 	spin_lock_init(&sdev->ud.lock);
 	sdev->ud.tcp_socket	= NULL;
+	sdev->ud.sockfd		= -1;
 
 	INIT_LIST_HEAD(&sdev->priv_init);
 	INIT_LIST_HEAD(&sdev->priv_tx);
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -791,6 +791,7 @@ static void vhci_shutdown_connection(str
 	if (vdev->ud.tcp_socket) {
 		sockfd_put(vdev->ud.tcp_socket);
 		vdev->ud.tcp_socket = NULL;
+		vdev->ud.sockfd = -1;
 	}
 	pr_info("release socket\n");
 
@@ -839,6 +840,7 @@ static void vhci_device_reset(struct usb
 	if (ud->tcp_socket) {
 		sockfd_put(ud->tcp_socket);
 		ud->tcp_socket = NULL;
+		ud->sockfd = -1;
 	}
 	ud->status = VDEV_ST_NULL;
 

[PATCH 3.18 35/58] usb: build drivers/usb/common/ when USB_SUPPORT is set

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>


[ Upstream commit c9d24f78268be444e803fb2bb138a2f598de9c23 ]

PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side
support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT
is enabled so that drivers/usb/common/ is built.

ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined!
ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!
ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_PHY)		+= usb/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_SUPPORT)	+= usb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/
 obj-$(CONFIG_SERIO)		+= input/serio/

[PATCH 3.18 36/58] ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keerthy <j-keerthy@ti.com>


[ Upstream commit b6d6af7226465b6d11eac09d0be2ab78a4a9eb62 ]

Referring TRM Am335X series:
http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf

The LastPowerStateEntered bitfield is present only for PM_CEFUSE
domain. This is not present in any of the other power domains. Hence
remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly
reads the reserved bit fields for all the other power domains.

Reading the reserved bits leads to wrongly interpreting the low
power transitions for various power domains that do not have the
LastPowerStateEntered field. The pm debug counters values are wrong
currently as we are incrementing them based on the reserved bits.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap2/prm33xx.c |   12 ------------
 1 file changed, 12 deletions(-)

--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -165,17 +165,6 @@ static int am33xx_pwrdm_read_pwrst(struc
 	return v;
 }
 
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
-	v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
-	v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@@ -329,7 +318,6 @@ struct pwrdm_ops am33xx_pwrdm_operations
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst		= am33xx_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,

[PATCH 3.18 37/58] ARM: dts: am4372: Correct the interrupts_properties of McASP

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>


[ Upstream commit 627395a6f8091c0aa18f49dca7df59ba3ec147ef ]

Fixes the following warnings:

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@48038000

arch/arm/boot/dts/am437x-cm-t43.dtb: Warning (interrupts_property):
interrupts size is (8), expected multiple of 12 in
/ocp@44000000/mcasp@4803C000

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/am4372.dtsi |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -702,7 +702,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
@@ -716,7 +717,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,

[PATCH 3.18 38/58] perf top: Fix window dimensions change handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <jolsa@kernel.org>


[ Upstream commit 89d0aeab4252adc2a7ea693637dd21c588bfa2d1 ]

The stdio perf top crashes when we change the terminal
window size. The reason is that we assumed we get the
perf_top pointer as a signal handler argument which is
not the case.

Changing the SIGWINCH handler logic to change global
resize variable, which is checked in the main thread
loop.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ysuzwz77oev1ftgvdscn9bpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/builtin-top.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -70,6 +70,7 @@
 #include <linux/types.h>
 
 static volatile int done;
+static volatile int resize;
 
 #define HEADER_LINE_NR  5
 
@@ -79,10 +80,13 @@ static void perf_top__update_print_entri
 }
 
 static void perf_top__sig_winch(int sig __maybe_unused,
-				siginfo_t *info __maybe_unused, void *arg)
+				siginfo_t *info __maybe_unused, void *arg __maybe_unused)
 {
-	struct perf_top *top = arg;
+	resize = 1;
+}
 
+static void perf_top__resize(struct perf_top *top)
+{
 	get_term_dimensions(&top->winsize);
 	perf_top__update_print_entries(top);
 }
@@ -461,7 +465,7 @@ static bool perf_top__handle_keypress(st
 					.sa_sigaction = perf_top__sig_winch,
 					.sa_flags     = SA_SIGINFO,
 				};
-				perf_top__sig_winch(SIGWINCH, NULL, top);
+				perf_top__resize(top);
 				sigaction(SIGWINCH, &act, NULL);
 			} else {
 				signal(SIGWINCH, SIG_DFL);
@@ -997,6 +1001,11 @@ static int __cmd_top(struct perf_top *to
 
 		if (hits == top->samples)
 			ret = perf_evlist__poll(top->evlist, 100);
+
+		if (resize) {
+			perf_top__resize(top);
+			resize = 0;
+		}
 	}
 
 	ret = 0;

[PATCH 3.18 39/58] perf bench numa: Fixup discontiguous/sparse numa nodes

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>


[ Upstream commit 321a7c35c90cc834851ceda18a8ee18f1d032b92 ]

Certain systems are designed to have sparse/discontiguous nodes.  On
such systems, 'perf bench numa' hangs, shows wrong number of nodes and
shows values for non-existent nodes. Handle this by only taking nodes
that are exposed by kernel to userspace.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1edbcd353c009e109e93d78f2f46381930c340fe.1511368645.git.sathnaga@linux.vnet.ibm.com
Signed-off-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/bench/numa.c |   56 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 51 insertions(+), 5 deletions(-)

--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -203,6 +203,47 @@ static const char * const numa_usage[] =
 	NULL
 };
 
+/*
+ * To get number of numa nodes present.
+ */
+static int nr_numa_nodes(void)
+{
+	int i, nr_nodes = 0;
+
+	for (i = 0; i < g->p.nr_nodes; i++) {
+		if (numa_bitmask_isbitset(numa_nodes_ptr, i))
+			nr_nodes++;
+	}
+
+	return nr_nodes;
+}
+
+/*
+ * To check if given numa node is present.
+ */
+static int is_node_present(int node)
+{
+	return numa_bitmask_isbitset(numa_nodes_ptr, node);
+}
+
+/*
+ * To check given numa node has cpus.
+ */
+static bool node_has_cpus(int node)
+{
+	struct bitmask *cpu = numa_allocate_cpumask();
+	unsigned int i;
+
+	if (cpu && !numa_node_to_cpus(node, cpu)) {
+		for (i = 0; i < cpu->size; i++) {
+			if (numa_bitmask_isbitset(cpu, i))
+				return true;
+		}
+	}
+
+	return false; /* lets fall back to nocpus safely */
+}
+
 static cpu_set_t bind_to_cpu(int target_cpu)
 {
 	cpu_set_t orig_mask, mask;
@@ -231,12 +272,12 @@ static cpu_set_t bind_to_cpu(int target_
 
 static cpu_set_t bind_to_node(int target_node)
 {
-	int cpus_per_node = g->p.nr_cpus/g->p.nr_nodes;
+	int cpus_per_node = g->p.nr_cpus / nr_numa_nodes();
 	cpu_set_t orig_mask, mask;
 	int cpu;
 	int ret;
 
-	BUG_ON(cpus_per_node*g->p.nr_nodes != g->p.nr_cpus);
+	BUG_ON(cpus_per_node * nr_numa_nodes() != g->p.nr_cpus);
 	BUG_ON(!cpus_per_node);
 
 	ret = sched_getaffinity(0, sizeof(orig_mask), &orig_mask);
@@ -636,7 +677,7 @@ static int parse_setup_node_list(void)
 			int i;
 
 			for (i = 0; i < mul; i++) {
-				if (t >= g->p.nr_tasks) {
+				if (t >= g->p.nr_tasks || !node_has_cpus(bind_node)) {
 					printf("\n# NOTE: ignoring bind NODEs starting at NODE#%d\n", bind_node);
 					goto out;
 				}
@@ -943,6 +984,8 @@ static void calc_convergence(double runt
 	sum = 0;
 
 	for (node = 0; node < g->p.nr_nodes; node++) {
+		if (!is_node_present(node))
+			continue;
 		nr = nodes[node];
 		nr_min = min(nr, nr_min);
 		nr_max = max(nr, nr_max);
@@ -963,8 +1006,11 @@ static void calc_convergence(double runt
 	process_groups = 0;
 
 	for (node = 0; node < g->p.nr_nodes; node++) {
-		int processes = count_node_processes(node);
+		int processes;
 
+		if (!is_node_present(node))
+			continue;
+		processes = count_node_processes(node);
 		nr = nodes[node];
 		tprintf(" %2d/%-2d", nr, processes);
 
@@ -1262,7 +1308,7 @@ static void print_summary(void)
 
 	printf("\n ###\n");
 	printf(" # %d %s will execute (on %d nodes, %d CPUs):\n",
-		g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", g->p.nr_nodes, g->p.nr_cpus);
+		g->p.nr_tasks, g->p.nr_tasks == 1 ? "task" : "tasks", nr_numa_nodes(), g->p.nr_cpus);
 	printf(" #      %5dx %5ldMB global  shared mem operations\n",
 			g->p.nr_loops, g->p.bytes_global/1024/1024);
 	printf(" #      %5dx %5ldMB process shared mem operations\n",

[PATCH 3.18 40/58] media: s5k6aa: describe some function parameters

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>


[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ]

as warned:
  drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa'
  drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset'
  drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/i2c/s5k6aa.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -421,6 +421,7 @@ static int s5k6aa_set_ahb_address(struct
 
 /**
  * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  *
  * Configure the internal ISP PLL for the required output frequency.
  * Locking: called with s5k6aa.lock mutex held.
@@ -669,6 +670,7 @@ static int s5k6aa_set_input_params(struc
 
 /**
  * s5k6aa_configure_video_bus - configure the video output interface
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  * @bus_type: video bus type: parallel or MIPI-CSI
  * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
  *
@@ -724,6 +726,8 @@ static int s5k6aa_new_config_sync(struct
 
 /**
  * s5k6aa_set_prev_config - write user preview register set
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
+ * @preset: s5kaa preset to be applied
  *
  * Configure output resolution and color fromat, pixel clock
  * frequency range, device frame rate type and frame period range.
@@ -777,6 +781,7 @@ static int s5k6aa_set_prev_config(struct
 
 /**
  * s5k6aa_initialize_isp - basic ISP MCU initialization
+ * @sd: pointer to V4L2 sub-device descriptor
  *
  * Configure AHB addresses for registers read/write; configure PLLs for
  * required output pixel clock. The ISP power supply needs to be already

[PATCH 3.18 41/58] scripts/kernel-doc: Dont fail with status != 0 if error encountered with -none

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>


[ Upstream commit e814bccbafece52a24e152d2395b5d49eef55841 ]

My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!

The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c2ea
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:

/**
 * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
 * bus layer usage.
 */

which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.

Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.

Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kernel-doc |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2616,4 +2616,4 @@ if ($verbose && $warnings) {
   print STDERR "$warnings warnings\n";
 }
 
-exit($errors);
+exit($output_mode eq "none" ? 0 : $errors);

[PATCH 3.18 42/58] m68k: add missing SOFTIRQENTRY_TEXT linker section

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Ungerer <gerg@linux-m68k.org>


[ Upstream commit 969de0988b77e5a57aac2f7270191a3c50540c52 ]

Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.

However commit 229a71860547 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:

  LD      vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]

To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/m68k/kernel/vmlinux-nommu.lds |    2 ++
 arch/m68k/kernel/vmlinux-std.lds   |    2 ++
 arch/m68k/kernel/vmlinux-sun3.lds  |    2 ++
 3 files changed, 6 insertions(+)

--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -44,6 +44,8 @@ SECTIONS {
 	.text : {
 		HEAD_TEXT
 		TEXT_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
 		*(.fixup)
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -15,6 +15,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
 	*(.fixup)
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -15,6 +15,8 @@ SECTIONS
   .text : {
 	HEAD_TEXT
 	TEXT_TEXT
+	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
 	*(.fixup)

[PATCH 3.18 43/58] powerpc/perf: Fix oops when grouping different pmu events

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>


[ Upstream commit 5aa04b3eb6fca63d2e9827be656dcadc26d54e11 ]

When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:

    Faulting instruction address: 0x00000000
    [link register   ] c00000000010ce88 power_check_constraints+0x128/0x980
    ...
    c00000000010e238 power_pmu_event_init+0x268/0x6f0
    c0000000002dc60c perf_try_init_event+0xdc/0x1a0
    c0000000002dce88 perf_event_alloc+0x7b8/0xac0
    c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
    c00000000000b004 system_call+0x38/0xe0

'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.

Consider only those events which belongs to 'perf_hw_context' in
collect_events().

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/perf/core-book3s.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1376,7 +1376,7 @@ static int collect_events(struct perf_ev
 	int n = 0;
 	struct perf_event *event;
 
-	if (!is_software_event(group)) {
+	if (group->pmu->task_ctx_nr == perf_hw_context) {
 		if (n >= max_count)
 			return -1;
 		ctrs[n] = group;
@@ -1384,7 +1384,7 @@ static int collect_events(struct perf_ev
 		events[n++] = group->hw.config;
 	}
 	list_for_each_entry(event, &group->sibling_list, group_entry) {
-		if (!is_software_event(event) &&
+		if (event->pmu->task_ctx_nr == perf_hw_context &&
 		    event->state != PERF_EVENT_STATE_OFF) {
 			if (n >= max_count)
 				return -1;

[PATCH 3.18 44/58] s390/dasd: prevent prefix I/O error

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Haberland <sth@linux.vnet.ibm.com>


[ Upstream commit da340f921d3454f1521671c7a5a43ad3331fbe50 ]

Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd_eckd.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -518,10 +518,12 @@ static int prefix_LRE(struct ccw1 *ccw,
 	pfxdata->validity.define_extent = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
-	if (startpriv->uid.type != UA_BASE_DEVICE) {
+	if (startpriv->uid.type == UA_BASE_PAV_ALIAS)
 		pfxdata->validity.verify_base = 1;
-		if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
-			pfxdata->validity.hyper_pav = 1;
+
+	if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) {
+		pfxdata->validity.verify_base = 1;
+		pfxdata->validity.hyper_pav = 1;
 	}
 
 	/* define extend data (mostly)*/
@@ -2969,10 +2971,12 @@ static int prepare_itcw(struct itcw *itc
 	pfxdata.validity.define_extent = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
-	if (startpriv->uid.type != UA_BASE_DEVICE) {
+	if (startpriv->uid.type == UA_BASE_PAV_ALIAS)
+		pfxdata.validity.verify_base = 1;
+
+	if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) {
 		pfxdata.validity.verify_base = 1;
-		if (startpriv->uid.type == UA_HYPER_PAV_ALIAS)
-			pfxdata.validity.hyper_pav = 1;
+		pfxdata.validity.hyper_pav = 1;
 	}
 
 	switch (cmd) {

[PATCH 3.18 45/58] gianfar: fix a flooded alignment reports because of padding issue.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zumeng Chen <zumeng.chen@gmail.com>


[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/gianfar.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1356,9 +1356,11 @@ static int gfar_probe(struct platform_de
 
 	gfar_init_addr_hash_table(priv);
 
-	/* Insert receive time stamps into padding alignment bytes */
+	/* Insert receive time stamps into padding alignment bytes, and
+	 * plus 2 bytes padding to ensure the cpu alignment.
+	 */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)
-		priv->padding = 8;
+		priv->padding = 8 + DEFAULT_PADDING;
 
 	if (dev->features & NETIF_F_IP_CSUM ||
 	    priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER)

[PATCH 3.18 46/58] net_sched: red: Avoid devision by zero

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nogah Frankel <nogahf@mellanox.com>


[ Upstream commit 5c472203421ab4f928aa1ae9e1dbcfdd80324148 ]

Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/red.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/red.h
+++ b/include/net/red.h
@@ -178,7 +178,7 @@ static inline void red_set_parms(struct
 	p->qth_max	= qth_max << Wlog;
 	p->Wlog		= Wlog;
 	p->Plog		= Plog;
-	if (delta < 0)
+	if (delta <= 0)
 		delta = 1;
 	p->qth_delta	= delta;
 	if (!max_P) {

[PATCH 3.18 47/58] net_sched: red: Avoid illegal values

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nogah Frankel <nogahf@mellanox.com>


[ Upstream commit 8afa10cbe281b10371fee5a87ab266e48d71a7f9 ]

Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/red.h     |   11 +++++++++++
 net/sched/sch_choke.c |    3 +++
 net/sched/sch_gred.c  |    3 +++
 net/sched/sch_red.c   |    2 ++
 net/sched/sch_sfq.c   |    3 +++
 5 files changed, 22 insertions(+)

--- a/include/net/red.h
+++ b/include/net/red.h
@@ -167,6 +167,17 @@ static inline void red_set_vars(struct r
 	v->qcount	= -1;
 }
 
+static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog)
+{
+	if (fls(qth_min) + Wlog > 32)
+		return false;
+	if (fls(qth_max) + Wlog > 32)
+		return false;
+	if (qth_max < qth_min)
+		return false;
+	return true;
+}
+
 static inline void red_set_parms(struct red_parms *p,
 				 u32 qth_min, u32 qth_max, u8 Wlog, u8 Plog,
 				 u8 Scell_log, u8 *stab, u32 max_P)
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -431,6 +431,9 @@ static int choke_change(struct Qdisc *sc
 
 	ctl = nla_data(tb[TCA_CHOKE_PARMS]);
 
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
+
 	if (ctl->limit > CHOKE_MAX_QUEUE)
 		return -EINVAL;
 
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -388,6 +388,9 @@ static inline int gred_change_vq(struct
 	struct gred_sched *table = qdisc_priv(sch);
 	struct gred_sched_data *q = table->tab[dp];
 
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
+
 	if (!q) {
 		table->tab[dp] = q = *prealloc;
 		*prealloc = NULL;
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -199,6 +199,8 @@ static int red_change(struct Qdisc *sch,
 	max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0;
 
 	ctl = nla_data(tb[TCA_RED_PARMS]);
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+		return -EINVAL;
 
 	if (ctl->limit > 0) {
 		child = fifo_create_dflt(sch, &bfifo_qdisc_ops, ctl->limit);
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -653,6 +653,9 @@ static int sfq_change(struct Qdisc *sch,
 	if (ctl->divisor &&
 	    (!is_power_of_2(ctl->divisor) || ctl->divisor > 65536))
 		return -EINVAL;
+	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
+					ctl_v1->Wlog))
+		return -EINVAL;
 	if (ctl_v1 && ctl_v1->qth_min) {
 		p = kmalloc(sizeof(*p), GFP_KERNEL);
 		if (!p)

[PATCH 3.18 48/58] btrfs: Fix possible off-by-one in btrfs_search_path_in_tree

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Borisov <nborisov@suse.com>


[ Upstream commit c8bcbfbd239ed60a6562964b58034ac8a25f4c31 ]

The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.

Implications:

Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.

btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.

Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.

Before this patch the buffer was one byte larger, but then the -1 was
not added.

Fixes: ac8e9819d71f907 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2233,7 +2233,7 @@ static noinline int btrfs_search_path_in
 	if (!path)
 		return -ENOMEM;
 
-	ptr = &name[BTRFS_INO_LOOKUP_PATH_MAX];
+	ptr = &name[BTRFS_INO_LOOKUP_PATH_MAX - 1];
 
 	key.objectid = tree_id;
 	key.type = BTRFS_ROOT_ITEM_KEY;

[PATCH 3.18 49/58] 509: fix printing uninitialized stack memory when OID is empty

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers3@gmail.com>


[ Upstream commit 8dfd2f22d3bf3ab7714f7495ad5d897b8845e8c1 ]

Callers of sprint_oid() do not check its return value before printing
the result.  In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed.  Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.

Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/oid_registry.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/lib/oid_registry.c
+++ b/lib/oid_registry.c
@@ -116,7 +116,7 @@ int sprint_oid(const void *data, size_t
 	int count;
 
 	if (v >= end)
-		return -EBADMSG;
+		goto bad;
 
 	n = *v++;
 	ret = count = snprintf(buffer, bufsize, "%u.%u", n / 40, n % 40);
@@ -134,7 +134,7 @@ int sprint_oid(const void *data, size_t
 			num = n & 0x7f;
 			do {
 				if (v >= end)
-					return -EBADMSG;
+					goto bad;
 				n = *v++;
 				num <<= 7;
 				num |= n & 0x7f;
@@ -148,6 +148,10 @@ int sprint_oid(const void *data, size_t
 	}
 
 	return ret;
+
+bad:
+	snprintf(buffer, bufsize, "(bad)");
+	return -EBADMSG;
 }
 EXPORT_SYMBOL_GPL(sprint_oid);
 

[PATCH 3.18 50/58] spi: sun4i: disable clocks in the remove function

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takuo Koguchi <takuo.koguchi@gmail.com>


[ Upstream commit c810daba0ab5226084a56893a789af427a801146 ]

mclk and hclk need to be disabled. Since pm_runtime_disable does
not disable the clocks, use pm_runtime_force_suspend instead.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-sun4i.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -458,7 +458,7 @@ err_free_master:
 
 static int sun4i_spi_remove(struct platform_device *pdev)
 {
-	pm_runtime_disable(&pdev->dev);
+	pm_runtime_force_suspend(&pdev->dev);
 
 	return 0;
 }

[PATCH 3.18 51/58] xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Klassert <steffen.klassert@secunet.com>


[ Upstream commit 732706afe1cc46ef48493b3d2b69c98f36314ae4 ]

On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.

Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.

We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/xfrm/xfrm_user.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1349,11 +1349,14 @@ static void copy_templates(struct xfrm_p
 
 static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
 {
+	u16 prev_family;
 	int i;
 
 	if (nr > XFRM_MAX_DEPTH)
 		return -EINVAL;
 
+	prev_family = family;
+
 	for (i = 0; i < nr; i++) {
 		/* We never validated the ut->family value, so many
 		 * applications simply leave it at zero.  The check was
@@ -1365,6 +1368,12 @@ static int validate_tmpl(int nr, struct
 		if (!ut[i].family)
 			ut[i].family = family;
 
+		if ((ut[i].mode == XFRM_MODE_TRANSPORT) &&
+		    (ut[i].family != prev_family))
+			return -EINVAL;
+
+		prev_family = ut[i].family;
+
 		switch (ut[i].family) {
 		case AF_INET:
 			break;

[PATCH 3.18 52/58] dmaengine: jz4740: disable/unprepare clk if probe fails

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Jordan <Tobias.Jordan@elektrobit.com>


[ Upstream commit eb9436966fdc84cebdf222952a99898ab46d9bb0 ]

in error path of jz4740_dma_probe(), call clk_disable_unprepare() to clean
up.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 25ce6c35fea0 MIPS: jz4740: Remove custom DMA API
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/dma-jz4740.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/dma/dma-jz4740.c
+++ b/drivers/dma/dma-jz4740.c
@@ -575,7 +575,7 @@ static int jz4740_dma_probe(struct platf
 
 	ret = dma_async_device_register(dd);
 	if (ret)
-		return ret;
+		goto err_clk;
 
 	irq = platform_get_irq(pdev, 0);
 	ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev);
@@ -588,6 +588,8 @@ static int jz4740_dma_probe(struct platf
 
 err_unregister:
 	dma_async_device_unregister(dd);
+err_clk:
+	clk_disable_unprepare(dmadev->clk);
 	return ret;
 }
 

[PATCH 3.18 53/58] mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Young <dyoung@redhat.com>


[ Upstream commit 7f6f60a1ba52538c16f26930bfbcfe193d9d746a ]

earlyprintk=efi,keep does not work any more with a warning
in mm/early_ioremap.c: WARN_ON(system_state != SYSTEM_BOOTING):
Boot just hangs because of the earlyprintk within the earlyprintk
implementation code itself.

This is caused by a new introduced middle state in:

  69a78ff226fe ("init: Introduce SYSTEM_SCHEDULING state")

early_ioremap() is fine in both SYSTEM_BOOTING and SYSTEM_SCHEDULING
states, original condition should be updated accordingly.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bp@suse.de
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20171209041610.GA3249@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/early_ioremap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/early_ioremap.c
+++ b/mm/early_ioremap.c
@@ -102,7 +102,7 @@ __early_ioremap(resource_size_t phys_add
 	enum fixed_addresses idx;
 	int i, slot;
 
-	WARN_ON(system_state != SYSTEM_BOOTING);
+	WARN_ON(system_state >= SYSTEM_RUNNING);
 
 	slot = -1;
 	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {

[PATCH 3.18 54/58] x86/mm/kmmio: Fix mmiotrace for page unaligned addresses

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Herbst <kherbst@redhat.com>


[ Upstream commit 6d60ce384d1d5ca32b595244db4077a419acc687 ]

If something calls ioremap() with an address not aligned to PAGE_SIZE, the
returned address might be not aligned as well. This led to a probe
registered on exactly the returned address, but the entire page was armed
for mmiotracing.

On calling iounmap() the address passed to unregister_kmmio_probe() was
PAGE_SIZE aligned by the caller leading to a complete freeze of the
machine.

We should always page align addresses while (un)registerung mappings,
because the mmiotracer works on top of pages, not mappings. We still keep
track of the probes based on their real addresses and lengths though,
because the mmiotrace still needs to know what are mapped memory regions.

Also move the call to mmiotrace_iounmap() prior page aligning the address,
so that all probes are unregistered properly, otherwise the kernel ends up
failing memory allocations randomly after disabling the mmiotracer.

Tested-by: Lyude <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: nouveau@lists.freedesktop.org
Link: http://lkml.kernel.org/r/20171127075139.4928-1-kherbst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/mm/ioremap.c |    4 ++--
 arch/x86/mm/kmmio.c   |   12 +++++++-----
 2 files changed, 9 insertions(+), 7 deletions(-)

--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -296,11 +296,11 @@ void iounmap(volatile void __iomem *addr
 	    (void __force *)addr < phys_to_virt(ISA_END_ADDRESS))
 		return;
 
+	mmiotrace_iounmap(addr);
+
 	addr = (volatile void __iomem *)
 		(PAGE_MASK & (unsigned long __force)addr);
 
-	mmiotrace_iounmap(addr);
-
 	/* Use the vm area unlocked, assuming the caller
 	   ensures there isn't another iounmap for the same address
 	   in parallel. Reuse of the virtual address is prevented by
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -434,17 +434,18 @@ int register_kmmio_probe(struct kmmio_pr
 	unsigned long flags;
 	int ret = 0;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	unsigned int l;
 	pte_t *pte;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
-	if (get_kmmio_probe(p->addr)) {
+	if (get_kmmio_probe(addr)) {
 		ret = -EEXIST;
 		goto out;
 	}
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte) {
 		ret = -EINVAL;
 		goto out;
@@ -453,7 +454,7 @@ int register_kmmio_probe(struct kmmio_pr
 	kmmio_count++;
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
-		if (add_kmmio_fault_page(p->addr + size))
+		if (add_kmmio_fault_page(addr + size))
 			pr_err("Unable to set page fault.\n");
 		size += page_level_size(l);
 	}
@@ -527,19 +528,20 @@ void unregister_kmmio_probe(struct kmmio
 {
 	unsigned long flags;
 	unsigned long size = 0;
+	unsigned long addr = p->addr & PAGE_MASK;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	struct kmmio_fault_page *release_list = NULL;
 	struct kmmio_delayed_release *drelease;
 	unsigned int l;
 	pte_t *pte;
 
-	pte = lookup_address(p->addr, &l);
+	pte = lookup_address(addr, &l);
 	if (!pte)
 		return;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (size < size_lim) {
-		release_kmmio_fault_page(p->addr + size, &release_list);
+		release_kmmio_fault_page(addr + size, &release_list);
 		size += page_level_size(l);
 	}
 	list_del_rcu(&p->list);

[PATCH 3.18 55/58] xen: XEN_ACPI_PROCESSOR is Dom0-only

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>


[ Upstream commit c4f9d9cb2c29ff04c6b4bb09b72802d8aedfc7cb ]

Add a respective dependency.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -222,7 +222,7 @@ config XEN_ACPI_HOTPLUG_CPU
 
 config XEN_ACPI_PROCESSOR
 	tristate "Xen ACPI processor"
-	depends on XEN && X86 && ACPI_PROCESSOR && CPU_FREQ
+	depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ
 	default m
 	help
           This ACPI processor uploads Power Management information to the Xen

[PATCH 3.18 56/58] hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai <baijiaju1990@163.com>


[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ]

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hippi/rrunner.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1381,8 +1381,8 @@ static int rr_close(struct net_device *d
 			    rrpriv->info_dma);
 	rrpriv->info = NULL;
 
-	free_irq(pdev->irq, dev);
 	spin_unlock_irqrestore(&rrpriv->lock, flags);
+	free_irq(pdev->irq, dev);
 
 	return 0;
 }

[PATCH 3.18 57/58] KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wanpeng Li <wanpeng.li@hotmail.com>

commit 9a6e7c39810e4a8bc7fc95056cefb40583fe07ef upstream.

qemu-system-x86-8600  [004] d..1  7205.687530: kvm_entry: vcpu 2
qemu-system-x86-8600  [004] ....  7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e
qemu-system-x86-8600  [004] ....  7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0
qemu-system-x86-8600  [004] ....  7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e
qemu-system-x86-8600  [004] .N..  7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018
    kworker/4:2-7814  [004] ....  7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000
qemu-system-x86-8600  [004] ....  7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018
qemu-system-x86-8600  [004] d..1  7205.687711: kvm_entry: vcpu 2

After running some memory intensive workload in guest, I catch the kworker
which completes the GUP too quickly, and queues an "Page Ready" #PF exception
after the "Page not Present" exception before the next vmentry as the above
trace which will result in #DF injected to guest.

This patch fixes it by clearing the queue for "Page not Present" if "Page Ready"
occurs before the next vmentry since the GUP has already got the required page
and shadow page table has already been fixed by "Page Ready" handler.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Fixes: 7c90705bf2a3 ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.")
[Changed indentation and added clearing of injected. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[port from upstream v4.14-rc1, Don't assign to kvm_queued_exception::injected or
 x86_exception::async_page_fault]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |   34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7756,6 +7756,13 @@ static int apf_put_user(struct kvm_vcpu
 				      sizeof(val));
 }
 
+static int apf_get_user(struct kvm_vcpu *vcpu, u32 *val)
+{
+
+	return kvm_read_guest_cached(vcpu->kvm, &vcpu->arch.apf.data, val,
+				      sizeof(u32));
+}
+
 void kvm_arch_async_page_not_present(struct kvm_vcpu *vcpu,
 				     struct kvm_async_pf *work)
 {
@@ -7782,6 +7789,7 @@ void kvm_arch_async_page_present(struct
 				 struct kvm_async_pf *work)
 {
 	struct x86_exception fault;
+	u32 val;
 
 	if (work->wakeup_all)
 		work->arch.token = ~0; /* broadcast wakeup */
@@ -7789,14 +7797,24 @@ void kvm_arch_async_page_present(struct
 		kvm_del_async_pf_gfn(vcpu, work->arch.gfn);
 	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 
-	if ((vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED) &&
-	    !apf_put_user(vcpu, KVM_PV_REASON_PAGE_READY)) {
-		fault.vector = PF_VECTOR;
-		fault.error_code_valid = true;
-		fault.error_code = 0;
-		fault.nested_page_fault = false;
-		fault.address = work->arch.token;
-		kvm_inject_page_fault(vcpu, &fault);
+	if (vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED &&
+	    !apf_get_user(vcpu, &val)) {
+		if (val == KVM_PV_REASON_PAGE_NOT_PRESENT &&
+		    vcpu->arch.exception.pending &&
+		    vcpu->arch.exception.nr == PF_VECTOR &&
+		    !apf_put_user(vcpu, 0)) {
+			vcpu->arch.exception.pending = false;
+			vcpu->arch.exception.nr = 0;
+			vcpu->arch.exception.has_error_code = false;
+			vcpu->arch.exception.error_code = 0;
+		} else if (!apf_put_user(vcpu, KVM_PV_REASON_PAGE_READY)) {
+			fault.vector = PF_VECTOR;
+			fault.error_code_valid = true;
+			fault.error_code = 0;
+			fault.nested_page_fault = false;
+			fault.address = work->arch.token;
+			kvm_inject_page_fault(vcpu, &fault);
+		}
 	}
 	vcpu->arch.apf.halted = false;
 	vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;

[PATCH 3.18 58/58] crypto: s5p-sss - Fix kernel Oops in AES-ECB mode

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kamil Konieczny <k.konieczny@partner.samsung.com>

commit c927b080c67e3e97193c81fc1d27f4251bf4e036 upstream.

In AES-ECB mode crypt is done with key only, so any use of IV
can cause kernel Oops. Use IV only in AES-CBC and AES-CTR.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org # can be applied after commit 8f9702aad138
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/s5p-sss.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -419,16 +419,21 @@ static void s5p_aes_crypt_start(struct s
 	uint32_t                    aes_control;
 	int                         err;
 	unsigned long               flags;
+	u8 *iv;
 
 	aes_control = SSS_AES_KEY_CHANGE_MODE;
 	if (mode & FLAGS_AES_DECRYPT)
 		aes_control |= SSS_AES_MODE_DECRYPT;
 
-	if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CBC)
+	if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CBC) {
 		aes_control |= SSS_AES_CHAIN_MODE_CBC;
-	else if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CTR)
+		iv = req->info;
+	} else if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CTR) {
 		aes_control |= SSS_AES_CHAIN_MODE_CTR;
-
+		iv = req->info;
+	} else {
+		iv = NULL; /* AES_ECB */
+	}
 	if (dev->ctx->keylen == AES_KEYSIZE_192)
 		aes_control |= SSS_AES_KEY_SIZE_192;
 	else if (dev->ctx->keylen == AES_KEYSIZE_256)
@@ -458,7 +463,7 @@ static void s5p_aes_crypt_start(struct s
 		goto outdata_error;
 
 	SSS_AES_WRITE(dev, AES_CONTROL, aes_control);
-	s5p_set_aes(dev, dev->ctx->aes_key, req->info, dev->ctx->keylen);
+	s5p_set_aes(dev, dev->ctx->aes_key, iv, dev->ctx->keylen);
 
 	s5p_set_dma_indata(dev,  req->src);
 	s5p_set_dma_outdata(dev, req->dst);

Re: [PATCH 3.18 00/58] 3.18.96-stable review

[kernelci.org bot]

stable-rc/linux-3.18.y boot: 62 boots: 1 failed, 53 passed with 8 offline (v3.18.95-59-g1f0a8ec0eeca)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-3.18.y/kernel/v3.18.95-59-g1f0a8ec0eeca/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-3.18.y/kernel/v3.18.95-59-g1f0a8ec0eeca/

Tree: stable-rc
Branch: linux-3.18.y
Git Describe: v3.18.95-59-g1f0a8ec0eeca
Git Commit: 1f0a8ec0eeca1f3e49ea0674c3b166120f25a656
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 30 unique boards, 13 SoC families, 14 builds out of 167

Boot Regressions Detected:

arm:

    exynos_defconfig:
        exynos5420-arndale-octa:
            lab-baylibre-seattle: failing since 2 days (last pass: v3.18.95 - first fail: v3.18.95-18-g740dcd9a92f2)

Boot Failure Detected:

arm:

    exynos_defconfig
        exynos5420-arndale-octa: 1 failed lab

Offline Platforms:

arm:

    exynos_defconfig:
        exynos5410-odroidxu: 1 offline lab

    multi_v7_defconfig:
        am335x-boneblack: 1 offline lab
        exynos5410-odroidxu: 1 offline lab
        tegra124-jetson-tk1: 1 offline lab

    sama5_defconfig:
        at91-sama5d4ek: 1 offline lab

    tegra_defconfig:
        tegra124-jetson-tk1: 1 offline lab

    bcm2835_defconfig:
        bcm2835-rpi-b: 1 offline lab

    omap2plus_defconfig:
        am335x-boneblack: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 3.18 00/58] 3.18.96-stable review

[Shuah Khan]

On 02/23/2018 11:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.96 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Feb 25 17:01:41 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.96-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 3.18 00/58] 3.18.96-stable review

[Harsh Shandilya]

[-- Attachment #1: Type: text/plain, Size: 868 bytes --]

On Sat 24 Feb, 2018, 12:01 AM Greg Kroah-Hartman, <
gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 3.18.96 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Feb 25 17:01:41 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.96-rc1.gz
> or in the git tree and branch at:
>         git://
> git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> linux-3.18.y
> and the diffstat can be found below.
>

Clean merge into the msm-3.18 CAF tree, no regressions noticed on the
OnePlus 3T. Thanks for the update :)

>

[-- Attachment #2: Type: text/html, Size: 1562 bytes --]

Re: [PATCH 3.18 00/58] 3.18.96-stable review

[Greg Kroah-Hartman]

On Sat, Feb 24, 2018 at 11:41:01AM +0000, Harsh Shandilya wrote:
> On Sat 24 Feb, 2018, 12:01 AM Greg Kroah-Hartman, <
> gregkh@linuxfoundation.org> wrote:
> 
> > This is the start of the stable review cycle for the 3.18.96 release.
> > There are 58 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Feb 25 17:01:41 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >
> > https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.96-rc1.gz
> > or in the git tree and branch at:
> >         git://
> > git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > linux-3.18.y
> > and the diffstat can be found below.
> >
> 
> Clean merge into the msm-3.18 CAF tree, no regressions noticed on the
> OnePlus 3T. Thanks for the update :)

Great, thanks for testing and letting me know.

greg k-h

Re: [PATCH 3.18 00/58] 3.18.96-stable review

[Guenter Roeck]

On 02/23/2018 10:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.96 release.
> There are 58 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Feb 25 17:01:41 UTC 2018.
> Anything received after that time might be too late.
> 

For v3.18.95-57-g6b94779:

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 112 pass: 112 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter