[PATCH AUTOSEL for 4.15 01/78] ipmi_si: Fix error handling of platform device

[PATCH AUTOSEL for 4.15 01/78] ipmi_si: Fix error handling of platform device

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 174134ac760275457bb0d1560a0dbe6cf8a12ad6 ]

Cleanup of platform devices created by the IPMI driver was not
being done correctly and could result in a memory leak.  So
create a local boolean to know how to clean up those platform
devices.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/ipmi/ipmi_si_intf.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 71fad747c0c7..7499b0cd8326 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2045,6 +2045,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	int rv = 0;
 	int i;
 	char *init_name = NULL;
+	bool platform_device_registered = false;
 
 	pr_info(PFX "Trying %s-specified %s state machine at %s address 0x%lx, slave address 0x%x, irq %d\n",
 		ipmi_addr_src_to_str(new_smi->io.addr_source),
@@ -2173,6 +2174,7 @@ static int try_smi_init(struct smi_info *new_smi)
 				rv);
 			goto out_err;
 		}
+		platform_device_registered = true;
 	}
 
 	dev_set_drvdata(new_smi->io.dev, new_smi);
@@ -2279,10 +2281,11 @@ static int try_smi_init(struct smi_info *new_smi)
 	}
 
 	if (new_smi->pdev) {
-		platform_device_unregister(new_smi->pdev);
+		if (platform_device_registered)
+			platform_device_unregister(new_smi->pdev);
+		else
+			platform_device_put(new_smi->pdev);
 		new_smi->pdev = NULL;
-	} else if (new_smi->pdev) {
-		platform_device_put(new_smi->pdev);
 	}
 
 	kfree(init_name);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 02/78] drm/amdgpu: use polling mem to set SDMA3 wptr for VF

[Sasha Levin]

From: Pixel Ding <Pixel.Ding@amd.com>

[ Upstream commit 2ffe31deb27579e2f2c9444e01f4d8abf385d145 ]

On Tonga VF, there're 2 sources updating wptr registers for
sdma3: 1) polling mem and 2) doorbell. When doorbell and polling
mem are both enabled on sdma3, there will be collision hit in
occasion between those two sources when ucode and h/w are doing
the updating on wptr register in parallel. Issue doesn't happen
on CP GFX/Compute since CP drops all doorbell writes when VF is
inactive. So enable polling mem and don't use doorbell for SDMA3.

Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h |  1 +
 drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c   | 27 +++++++++++++++++++--------
 2 files changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
index b18c2b96691f..522a8742a60b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
@@ -187,6 +187,7 @@ struct amdgpu_ring {
 	uint64_t                eop_gpu_addr;
 	u32			doorbell_index;
 	bool			use_doorbell;
+	bool			use_pollmem;
 	unsigned		wptr_offs;
 	unsigned		fence_offs;
 	uint64_t		current_ctx;
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
index 6d06f8eb659f..cc4fc2e43b7b 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c
@@ -355,7 +355,7 @@ static uint64_t sdma_v3_0_ring_get_wptr(struct amdgpu_ring *ring)
 	struct amdgpu_device *adev = ring->adev;
 	u32 wptr;
 
-	if (ring->use_doorbell) {
+	if (ring->use_doorbell || ring->use_pollmem) {
 		/* XXX check if swapping is necessary on BE */
 		wptr = ring->adev->wb.wb[ring->wptr_offs] >> 2;
 	} else {
@@ -380,10 +380,13 @@ static void sdma_v3_0_ring_set_wptr(struct amdgpu_ring *ring)
 
 	if (ring->use_doorbell) {
 		u32 *wb = (u32 *)&adev->wb.wb[ring->wptr_offs];
-
 		/* XXX check if swapping is necessary on BE */
 		WRITE_ONCE(*wb, (lower_32_bits(ring->wptr) << 2));
 		WDOORBELL32(ring->doorbell_index, lower_32_bits(ring->wptr) << 2);
+	} else if (ring->use_pollmem) {
+		u32 *wb = (u32 *)&adev->wb.wb[ring->wptr_offs];
+
+		WRITE_ONCE(*wb, (lower_32_bits(ring->wptr) << 2));
 	} else {
 		int me = (ring == &ring->adev->sdma.instance[0].ring) ? 0 : 1;
 
@@ -718,10 +721,14 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_RB_WPTR_POLL_ADDR_HI + sdma_offsets[i],
 		       upper_32_bits(wptr_gpu_addr));
 		wptr_poll_cntl = RREG32(mmSDMA0_GFX_RB_WPTR_POLL_CNTL + sdma_offsets[i]);
-		if (amdgpu_sriov_vf(adev))
-			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl, SDMA0_GFX_RB_WPTR_POLL_CNTL, F32_POLL_ENABLE, 1);
+		if (ring->use_pollmem)
+			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl,
+						       SDMA0_GFX_RB_WPTR_POLL_CNTL,
+						       ENABLE, 1);
 		else
-			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl, SDMA0_GFX_RB_WPTR_POLL_CNTL, F32_POLL_ENABLE, 0);
+			wptr_poll_cntl = REG_SET_FIELD(wptr_poll_cntl,
+						       SDMA0_GFX_RB_WPTR_POLL_CNTL,
+						       ENABLE, 0);
 		WREG32(mmSDMA0_GFX_RB_WPTR_POLL_CNTL + sdma_offsets[i], wptr_poll_cntl);
 
 		/* enable DMA RB */
@@ -1203,9 +1210,13 @@ static int sdma_v3_0_sw_init(void *handle)
 	for (i = 0; i < adev->sdma.num_instances; i++) {
 		ring = &adev->sdma.instance[i].ring;
 		ring->ring_obj = NULL;
-		ring->use_doorbell = true;
-		ring->doorbell_index = (i == 0) ?
-			AMDGPU_DOORBELL_sDMA_ENGINE0 : AMDGPU_DOORBELL_sDMA_ENGINE1;
+		if (!amdgpu_sriov_vf(adev)) {
+			ring->use_doorbell = true;
+			ring->doorbell_index = (i == 0) ?
+				AMDGPU_DOORBELL_sDMA_ENGINE0 : AMDGPU_DOORBELL_sDMA_ENGINE1;
+		} else {
+			ring->use_pollmem = true;
+		}
 
 		sprintf(ring->name, "sdma%d", i);
 		r = amdgpu_ring_init(adev, ring, 1024,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 03/78] Bluetooth: hci_qca: Avoid setup failure on missing rampatch

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ]

Assuming that the original code idea was to enable in-band sleeping
only if the setup_rome method returns succes and run in 'standard'
mode otherwise, we should not return setup_rome return value which
makes qca_setup fail if no rampatch/nvm file found.

This fixes BT issue on the dragonboard-820C p4 which includes the
following QCA controller:
hci0: Product:0x00000008
hci0: Patch  :0x00000111
hci0: ROM    :0x00000302
hci0: SOC    :0x00000044

Since there is no rampatch for this controller revision, just make
it work as is.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/bluetooth/hci_qca.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index bbd7db7384e6..05ec530b8a3a 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -932,6 +932,9 @@ static int qca_setup(struct hci_uart *hu)
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		ret = 0;
 	}
 
 	/* Setup bdaddr */
-- 
2.14.1

[PATCH AUTOSEL for 4.15 04/78] Bluetooth: btqcomsmd: Fix skb double free corruption

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 67b8fbead4685b36d290a0ef91c6ddffc4920ec9 ]

In case of hci send frame failure, skb is still owned
by the caller (hci_core) and then should not be freed.

This fixes crash on dragonboard-410c when sending SCO
packet. skb is freed by both btqcomsmd and hci_core.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/bluetooth/btqcomsmd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 663bed63b871..2c9a5fc9137d 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -88,7 +88,8 @@ static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
 		break;
 	}
 
-	kfree_skb(skb);
+	if (!ret)
+		kfree_skb(skb);
 
 	return ret;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 05/78] cpufreq: longhaul: Revert transition_delay_us to 200 ms

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 1d0d064307cbfd8546841f6e9d94d02c55e45e1e ]

The commit e948bc8fbee0 ("cpufreq: Cap the default transition delay
value to 10 ms") caused a regression on EPIA-M min-ITX computer where
shutdown or reboot hangs occasionally with a print message like:

longhaul: Warning: Timeout while waiting for idle PCI bus
cpufreq: __target_index: Failed to change cpu frequency: -16

This probably happens because the cpufreq governor tries to change the
frequency of the CPU faster than allowed by the hardware.

Before the above commit, the default transition delay was set to 200 ms
for a transition_latency of 200000 ns. Lets revert back to that
transition delay value to fix it. Note that several other transition
delay values were tested like 20 ms and 30 ms and none of them have
resolved system hang issue completely.

Fixes: e948bc8fbee0 (cpufreq: Cap the default transition delay value to 10 ms)
Reported-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/cpufreq/longhaul.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index d5e27bc7585a..859a62ea6120 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
 	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
 		longhaul_setup_voltagescaling();
 
-	policy->cpuinfo.transition_latency = 200000;	/* nsec */
+	policy->transition_delay_us = 200000;	/* usec */
 
 	return cpufreq_table_validate_and_show(policy, longhaul_table);
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 07/78] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt

[Sasha Levin]

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>

[ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ]

_channel_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference. Fix this by moving the pointer dereference
after _channel_ has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
index a0acee7671b1..8bd19e61846d 100644
--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -83,7 +83,7 @@ static void c8sectpfe_timer_interrupt(struct timer_list *t)
 static void channel_swdemux_tsklet(unsigned long data)
 {
 	struct channel_info *channel = (struct channel_info *)data;
-	struct c8sectpfei *fei = channel->fei;
+	struct c8sectpfei *fei;
 	unsigned long wp, rp;
 	int pos, num_packets, n, size;
 	u8 *buf;
@@ -91,6 +91,8 @@ static void channel_swdemux_tsklet(unsigned long data)
 	if (unlikely(!channel || !channel->irec))
 		return;
 
+	fei = channel->fei;
+
 	wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0));
 	rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0));
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 06/78] dt-bindings: net: add TI CC2560 Bluetooth chip

[Sasha Levin]

From: David Lechner <david@lechnology.com>

[ Upstream commit 07c7edd0db441f83eeee087470add5be280cc018 ]

This adds a compatible string for the Texas Instruments CC2560 Bluetooth
chip to the existing TI WiLink shared transport bindings. These chips are
similar enough that the same bindings work for both. The file is renamed
to ti-bluetooth.txt to make it more generic.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../bindings/net/{ti,wilink-st.txt => ti-bluetooth.txt}     | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/net/{ti,wilink-st.txt => ti-bluetooth.txt} (75%)

diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
similarity index 75%
rename from Documentation/devicetree/bindings/net/ti,wilink-st.txt
rename to Documentation/devicetree/bindings/net/ti-bluetooth.txt
index 1649c1f66b07..3690732750f0 100644
--- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt
+++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
@@ -1,10 +1,18 @@
-TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+Texas Instruments Bluetooth Chips
+---------------------------------
+
+This documents the binding structure and common properties for serial
+attached TI Bluetooth devices. The following chips are included in this
+binding:
+
+* TI CC256x Bluetooth devices
+* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
 
 TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
 and GPS over what's called "shared transport". The shared transport is
 standard BT HCI protocol with additional channels for the other functions.
 
-These devices also have a separate WiFi interface as described in
+TI WiLink devices also have a separate WiFi interface as described in
 wireless/ti,wlcore.txt.
 
 This bindings follows the UART slave device binding in
@@ -12,6 +20,7 @@ This bindings follows the UART slave device binding in
 
 Required properties:
  - compatible: should be one of the following:
+    "ti,cc2560"
     "ti,wl1271-st"
     "ti,wl1273-st"
     "ti,wl1281-st"
-- 
2.14.1

[PATCH AUTOSEL for 4.15 09/78] net: fec: add phy_reset_after_clk_enable() support

[Sasha Levin]

From: Richard Leitner <richard.leitner@skidata.com>

[ Upstream commit 1b0a83ac04e383e3bed21332962b90710fcf2828 ]

Some PHYs (for example the SMSC LAN8710/LAN8720) doesn't allow turning
the refclk on and off again during operation (according to their
datasheet). Nonetheless exactly this behaviour was introduced for power
saving reasons by commit e8fcfcd5684a ("net: fec: optimize the clock management to save power").
Therefore add support for the phy_reset_after_clk_enable function from
phylib to mitigate this issue.

Generally speaking this issue is only relevant if the ref clk for the
PHY is generated by the SoC and therefore the PHY is configured to
"REF_CLK In Mode". In our specific case (PCB) this problem does occur at
about every 10th to 50th POR of an LAN8710 connected to an i.MX6SOLO
SoC. The typical symptom of this problem is a "swinging" ethernet link.
Similar issues were reported by users of the NXP forum:
	https://community.nxp.com/thread/389902
	https://community.nxp.com/message/309354
With this patch applied the issue didn't occur for at least a few
hundret PORs of our board.

Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power")
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a74300a4459c..90aa69a08922 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1868,6 +1868,8 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 		ret = clk_prepare_enable(fep->clk_ref);
 		if (ret)
 			goto failed_clk_ref;
+
+		phy_reset_after_clk_enable(ndev->phydev);
 	} else {
 		clk_disable_unprepare(fep->clk_ahb);
 		clk_disable_unprepare(fep->clk_enet_out);
@@ -2840,6 +2842,7 @@ fec_enet_open(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	int ret;
+	bool reset_again;
 
 	ret = pm_runtime_get_sync(&fep->pdev->dev);
 	if (ret < 0)
@@ -2850,6 +2853,17 @@ fec_enet_open(struct net_device *ndev)
 	if (ret)
 		goto clk_enable;
 
+	/* During the first fec_enet_open call the PHY isn't probed at this
+	 * point. Therefore the phy_reset_after_clk_enable() call within
+	 * fec_enet_clk_enable() fails. As we need this reset in order to be
+	 * sure the PHY is working correctly we check if we need to reset again
+	 * later when the PHY is probed
+	 */
+	if (ndev->phydev && ndev->phydev->drv)
+		reset_again = false;
+	else
+		reset_again = true;
+
 	/* I should reset the ring buffers here, but I don't yet know
 	 * a simple way to do that.
 	 */
@@ -2866,6 +2880,12 @@ fec_enet_open(struct net_device *ndev)
 	if (ret)
 		goto err_enet_mii_probe;
 
+	/* Call phy_reset_after_clk_enable() again if it failed during
+	 * phy_reset_after_clk_enable() before because the PHY wasn't probed.
+	 */
+	if (reset_again)
+		phy_reset_after_clk_enable(ndev->phydev);
+
 	if (fep->quirks & FEC_QUIRK_ERR006687)
 		imx6q_cpuidle_fec_irqs_used();
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 08/78] drm/msm: fix leak in failed get_pages

[Sasha Levin]

From: Prakash Kamliya <pkamliya@codeaurora.org>

[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]

get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.

Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/msm/msm_gem.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index 81fe6d6740ce..07376de9ff4c 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -93,14 +93,17 @@ static struct page **get_pages(struct drm_gem_object *obj)
 			return p;
 		}
 
+		msm_obj->pages = p;
+
 		msm_obj->sgt = drm_prime_pages_to_sg(p, npages);
 		if (IS_ERR(msm_obj->sgt)) {
+			void *ptr = ERR_CAST(msm_obj->sgt);
+
 			dev_err(dev->dev, "failed to allocate sgt\n");
-			return ERR_CAST(msm_obj->sgt);
+			msm_obj->sgt = NULL;
+			return ptr;
 		}
 
-		msm_obj->pages = p;
-
 		/* For non-cached buffers, ensure the new pages are clean
 		 * because display controller, GPU, etc. are not coherent:
 		 */
@@ -135,7 +138,10 @@ static void put_pages(struct drm_gem_object *obj)
 		if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
 			dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl,
 					msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
-		sg_free_table(msm_obj->sgt);
+
+		if (msm_obj->sgt)
+			sg_free_table(msm_obj->sgt);
+
 		kfree(msm_obj->sgt);
 
 		if (use_pages(obj))
-- 
2.14.1

[PATCH AUTOSEL for 4.15 11/78] IB/ipoib: Warn when one port fails to initialize

[Sasha Levin]

From: Yuval Shaia <yuval.shaia@oracle.com>

[ Upstream commit ac6dbf7fa4707c75a247b540cc0b5c881f3d0ba8 ]

If one port fails to initialize an error message should indicate the
reason and driver should continue serving the working port(s) and other
HCA(s).

Fixes: e4b2d06892c7 ("IB/ipoib: Remove device when one port fails to init").
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 8880351df179..c35c28015f8e 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -2207,8 +2207,10 @@ static struct net_device *ipoib_add_port(const char *format,
 	int result = -ENOMEM;
 
 	priv = ipoib_intf_alloc(hca, port, format);
-	if (!priv)
+	if (!priv) {
+		pr_warn("%s, %d: ipoib_intf_alloc failed\n", hca->name, port);
 		goto alloc_mem_failed;
+	}
 
 	SET_NETDEV_DEV(priv->dev, hca->dev.parent);
 	priv->dev->dev_id = port - 1;
@@ -2337,8 +2339,7 @@ static void ipoib_add_one(struct ib_device *device)
 	}
 
 	if (!count) {
-		pr_err("Failed to init port, removing it\n");
-		ipoib_remove_one(device, dev_list);
+		kfree(dev_list);
 		return;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 10/78] dm: ensure bio submission follows a depth-first tree walk

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 18a25da84354c6bb655320de6072c00eda6eb602 ]

A dm device can, in general, represent a tree of targets, each of which
handles a sub-range of the range of blocks handled by the parent.

The bio sequencing managed by generic_make_request() requires that bios
are generated and handled in a depth-first manner.  Each call to a
make_request_fn() may submit bios to a single member device, and may
submit bios for a reduced region of the same device as the
make_request_fn.

In particular, any bios submitted to member devices must be expected to
be processed in order, so a later one must never wait for an earlier
one.

This ordering is usually achieved by using bio_split() to reduce a bio
to a size that can be completely handled by one target, and resubmitting
the remainder to the originating device. bio_queue_split() shows the
canonical approach.

dm doesn't follow this approach, largely because it has needed to split
bios since long before bio_split() was available.  It currently can
submit bios to separate targets within the one dm_make_request() call.
Dependencies between these targets, as can happen with dm-snap, can
cause deadlocks if either bios gets stuck behind the other in the queues
managed by generic_make_request().  This requires the 'rescue'
functionality provided by dm_offload_{start,end}.

Some of this requirement can be removed by changing the order of bio
submission to follow the canonical approach.  That is, if dm finds that
it needs to split a bio, the remainder should be sent to
generic_make_request() rather than being handled immediately.  This
delays the handling until the first part is completely processed, so the
deadlock problems do not occur.

__split_and_process_bio() can be called both from dm_make_request() and
from dm_wq_work().  When called from dm_wq_work() the current approach
is perfectly satisfactory as each bio will be processed immediately.
When called from dm_make_request(), current->bio_list will be non-NULL,
and in this case it is best to create a separate "clone" bio for the
remainder.

When we use bio_clone_bioset() to split off the front part of a bio
and chain the two together and submit the remainder to
generic_make_request(), it is important that the newly allocated
bio is used as the head to be processed immediately, and the original
bio gets "bio_advance()"d and sent to generic_make_request() as the
remainder.  Otherwise, if the newly allocated bio is used as the
remainder, and if it then needs to be split again, then the next
bio_clone_bioset() call will be made while holding a reference a bio
(result of the first clone) from the same bioset.  This can potentially
exhaust the bioset mempool and result in a memory allocation deadlock.

Note that there is no race caused by reassigning cio.io->bio after already
calling __map_bio().  This bio will only be dereferenced again after
dec_pending() has found io->io_count to be zero, and this cannot happen
before the dec_pending() call at the end of __split_and_process_bio().

To provide the clone bio when splitting, we use q->bio_split.  This
was previously being freed by bio-based dm to avoid having excess
rescuer threads.  As bio_split bio sets no longer create rescuer
threads, there is little cost and much gain from restoring the
q->bio_split bio set.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/md/dm.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 1c42b00d3be2..04402d2ccb20 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1499,8 +1499,29 @@ static void __split_and_process_bio(struct mapped_device *md,
 	} else {
 		ci.bio = bio;
 		ci.sector_count = bio_sectors(bio);
-		while (ci.sector_count && !error)
+		while (ci.sector_count && !error) {
 			error = __split_and_process_non_flush(&ci);
+			if (current->bio_list && ci.sector_count && !error) {
+				/*
+				 * Remainder must be passed to generic_make_request()
+				 * so that it gets handled *after* bios already submitted
+				 * have been completely processed.
+				 * We take a clone of the original to store in
+				 * ci.io->bio to be used by end_io_acct() and
+				 * for dec_pending to use for completion handling.
+				 * As this path is not used for REQ_OP_ZONE_REPORT,
+				 * the usage of io->bio in dm_remap_zone_report()
+				 * won't be affected by this reassignment.
+				 */
+				struct bio *b = bio_clone_bioset(bio, GFP_NOIO,
+								 md->queue->bio_split);
+				ci.io->bio = b;
+				bio_advance(bio, (bio_sectors(bio) - ci.sector_count) << 9);
+				bio_chain(b, bio);
+				generic_make_request(bio);
+				break;
+			}
+		}
 	}
 
 	/* drop the extra reference count */
@@ -1511,8 +1532,8 @@ static void __split_and_process_bio(struct mapped_device *md,
  *---------------------------------------------------------------*/
 
 /*
- * The request function that just remaps the bio built up by
- * dm_merge_bvec.
+ * The request function that remaps the bio to one target and
+ * splits off any remainder.
  */
 static blk_qc_t dm_make_request(struct request_queue *q, struct bio *bio)
 {
@@ -2035,12 +2056,6 @@ int dm_setup_md_queue(struct mapped_device *md, struct dm_table *t)
 	case DM_TYPE_DAX_BIO_BASED:
 		dm_init_normal_md_queue(md);
 		blk_queue_make_request(md->queue, dm_make_request);
-		/*
-		 * DM handles splitting bios as needed.  Free the bio_split bioset
-		 * since it won't be used (saves 1 process per bio-based DM device).
-		 */
-		bioset_free(md->queue->bio_split);
-		md->queue->bio_split = NULL;
 
 		if (type == DM_TYPE_DAX_BIO_BASED)
 			queue_flag_set_unlocked(QUEUE_FLAG_DAX, md->queue);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 12/78] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 302d6424e4a293a5761997e6c9fc3dfb1e4c355f ]

With gcc-4.1.2:

    drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’:
    drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function

Indeed, if nl_client is not found in any of the scanned has buckets, ret
will be used uninitialized.

Preinitialize ret to -EINVAL to fix this.

Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/iwpm_util.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/core/iwpm_util.c b/drivers/infiniband/core/iwpm_util.c
index 3c4faadb8cdd..81528f64061a 100644
--- a/drivers/infiniband/core/iwpm_util.c
+++ b/drivers/infiniband/core/iwpm_util.c
@@ -654,6 +654,7 @@ int iwpm_send_mapinfo(u8 nl_client, int iwpm_pid)
 	}
 	skb_num++;
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
+	ret = -EINVAL;
 	for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 		hlist_for_each_entry(map_info, &iwpm_hash_bucket[i],
 				     hlist_node) {
-- 
2.14.1

[PATCH AUTOSEL for 4.15 13/78] hv_netvsc: Fix the receive buffer size limit

[Sasha Levin]

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit 11b2b653102571ac791885324371d9a1a17b900e ]

The max should be 31 MB on host with NVSP version > 2.

On legacy hosts (NVSP version <=2) only 15 MB receive buffer is allowed,
otherwise the buffer request will be rejected by the host, resulting
vNIC not coming up.

The NVSP version is only available after negotiation. So, we add the
limit checking for legacy hosts in netvsc_init_buf().

Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/hyperv/hyperv_net.h | 6 ++++--
 drivers/net/hyperv/netvsc.c     | 5 +++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index 88ddfb92122b..dab27e91b83b 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -635,9 +635,11 @@ struct nvsp_message {
 #define NETVSC_MTU 65535
 #define NETVSC_MTU_MIN ETH_MIN_MTU
 
-#define NETVSC_RECEIVE_BUFFER_SIZE		(1024*1024*16)	/* 16MB */
-#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY	(1024*1024*15)  /* 15MB */
+/* Max buffer sizes allowed by a host */
+#define NETVSC_RECEIVE_BUFFER_SIZE		(1024 * 1024 * 31) /* 31MB */
+#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY	(1024 * 1024 * 15) /* 15MB */
 #define NETVSC_SEND_BUFFER_SIZE			(1024 * 1024 * 15)   /* 15MB */
+
 #define NETVSC_INVALID_INDEX			-1
 
 #define NETVSC_SEND_SECTION_SIZE		6144
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index bfc79698b8f4..1e4f512fb90d 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -267,6 +267,11 @@ static int netvsc_init_buf(struct hv_device *device,
 	buf_size = device_info->recv_sections * device_info->recv_section_size;
 	buf_size = roundup(buf_size, PAGE_SIZE);
 
+	/* Legacy hosts only allow smaller receive buffer */
+	if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_2)
+		buf_size = min_t(unsigned int, buf_size,
+				 NETVSC_RECEIVE_BUFFER_SIZE_LEGACY);
+
 	net_device->recv_buf = vzalloc(buf_size);
 	if (!net_device->recv_buf) {
 		netdev_err(ndev,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 15/78] tcp: allow TLP in ECN CWR

[Sasha Levin]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit b4f70c3d4ec32a2ff4c62e1e2da0da5f55fe12bd ]

This patch enables tail loss probe in cwnd reduction (CWR) state
to detect potential losses. Prior to this patch, since the sender
uses PRR to determine the cwnd in CWR state, the combination of
CWR+PRR plus tcp_tso_should_defer() could cause unnecessary stalls
upon losses: PRR makes cwnd so gentle that tcp_tso_should_defer()
defers sending wait for more ACKs. The ACKs may not come due to
packet losses.

Disallowing TLP when there is unused cwnd had the primary effect
of disallowing TLP when there is TSO deferral, Nagle deferral,
or we hit the rwin limit. Because basically every application
write() or incoming ACK will cause us to run tcp_write_xmit()
to see if we can send more, and then if we sent something we call
tcp_schedule_loss_probe() to see if we should schedule a TLP. At
that point, there are a few common reasons why some cwnd budget
could still be unused:

(a) rwin limit
(b) nagle check
(c) TSO deferral
(d) TSQ

For (d), after the next packet tx completion the TSQ mechanism
will allow us to send more packets, so we don't really need a
TLP (in practice it shouldn't matter whether we schedule one
or not). But for (a), (b), (c) the sender won't send any more
packets until it gets another ACK. But if the whole flight was
lost, or all the ACKs were lost, then we won't get any more ACKs,
and ideally we should schedule and send a TLP to get more feedback.
In particular for a long time we have wanted some kind of timer for
TSO deferral, and at least this would give us some kind of timer

Reported-by: Steve Ibanez <sibanez@stanford.edu>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Nandita Dukkipati <nanditad@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv4/tcp_output.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index a4d214c7b506..04be9f833927 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2414,15 +2414,12 @@ bool tcp_schedule_loss_probe(struct sock *sk, bool advancing_rto)
 
 	early_retrans = sock_net(sk)->ipv4.sysctl_tcp_early_retrans;
 	/* Schedule a loss probe in 2*RTT for SACK capable connections
-	 * in Open state, that are either limited by cwnd or application.
+	 * not in loss recovery, that are either limited by cwnd or application.
 	 */
 	if ((early_retrans != 3 && early_retrans != 4) ||
 	    !tp->packets_out || !tcp_is_sack(tp) ||
-	    icsk->icsk_ca_state != TCP_CA_Open)
-		return false;
-
-	if ((tp->snd_cwnd > tcp_packets_in_flight(tp)) &&
-	     !tcp_write_queue_empty(sk))
+	    (icsk->icsk_ca_state != TCP_CA_Open &&
+	     icsk->icsk_ca_state != TCP_CA_CWR))
 		return false;
 
 	/* Probe timeout is 2*rtt. Add minimum RTO to account
-- 
2.14.1

[PATCH AUTOSEL for 4.15 14/78] hv_netvsc: Fix the TX/RX buffer default sizes

[Sasha Levin]

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit 41f61db2cd24d5ad802386719cccde1479aa82a6 ]

The values were not computed correctly. There are no significant
visible impact, though.

The intended size of RX buffer is 16 MB, and the default slot size is 1728.
So, NETVSC_DEFAULT_RX should be 16*1024*1024 / 1728 = 9709.

The intended size of TX buffer is 1 MB, and the slot size is 6144.
So, NETVSC_DEFAULT_TX should be 1024*1024 / 6144 = 170.

The patch puts the formula directly into the macro, and moves them to
hyperv_net.h, together with related macros.

Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/hyperv/hyperv_net.h | 13 ++++++++++++-
 drivers/net/hyperv/netvsc_drv.c |  4 ----
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index dab27e91b83b..c2653ac499e1 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -638,13 +638,24 @@ struct nvsp_message {
 /* Max buffer sizes allowed by a host */
 #define NETVSC_RECEIVE_BUFFER_SIZE		(1024 * 1024 * 31) /* 31MB */
 #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY	(1024 * 1024 * 15) /* 15MB */
-#define NETVSC_SEND_BUFFER_SIZE			(1024 * 1024 * 15)   /* 15MB */
+#define NETVSC_RECEIVE_BUFFER_DEFAULT		(1024 * 1024 * 16)
+
+#define NETVSC_SEND_BUFFER_SIZE			(1024 * 1024 * 15)  /* 15MB */
+#define NETVSC_SEND_BUFFER_DEFAULT		(1024 * 1024)
 
 #define NETVSC_INVALID_INDEX			-1
 
 #define NETVSC_SEND_SECTION_SIZE		6144
 #define NETVSC_RECV_SECTION_SIZE		1728
 
+/* Default size of TX buf: 1MB, RX buf: 16MB */
+#define NETVSC_MIN_TX_SECTIONS	10
+#define NETVSC_DEFAULT_TX	(NETVSC_SEND_BUFFER_DEFAULT \
+				 / NETVSC_SEND_SECTION_SIZE)
+#define NETVSC_MIN_RX_SECTIONS	10
+#define NETVSC_DEFAULT_RX	(NETVSC_RECEIVE_BUFFER_DEFAULT \
+				 / NETVSC_RECV_SECTION_SIZE)
+
 #define NETVSC_RECEIVE_BUFFER_ID		0xcafe
 #define NETVSC_SEND_BUFFER_ID			0
 
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 5129647d420c..dde3251da004 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -46,10 +46,6 @@
 #include "hyperv_net.h"
 
 #define RING_SIZE_MIN		64
-#define NETVSC_MIN_TX_SECTIONS	10
-#define NETVSC_DEFAULT_TX	192	/* ~1M */
-#define NETVSC_MIN_RX_SECTIONS	10	/* ~64K */
-#define NETVSC_DEFAULT_RX	10485   /* Max ~16M */
 
 #define LINKCHANGE_INT (2 * HZ)
 #define VF_TAKEOVER_INT (HZ / 10)
-- 
2.14.1

[PATCH AUTOSEL for 4.15 16/78] KVM: x86: add support for emulating UMIP

[Sasha Levin]

From: Paolo Bonzini <pbonzini@redhat.com>

[ Upstream commit 66336cab3531d3325ebde36a04725dddd0c42cb5 ]

The User-Mode Instruction Prevention feature present in recent Intel
processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and
str) from being executed with CPL > 0. Otherwise, a general protection
fault is issued.

UMIP instructions in general are also able to trigger vmexits, so we can
actually emulate UMIP on older processors.  This commit sets up the
infrastructure so that kvm-intel.ko and kvm-amd.ko can set the UMIP
feature bit for CPUID even if the feature is not actually available
in hardware.

Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/x86/include/asm/kvm_host.h | 1 +
 arch/x86/kvm/cpuid.c            | 2 ++
 arch/x86/kvm/svm.c              | 6 ++++++
 arch/x86/kvm/vmx.c              | 6 ++++++
 4 files changed, 15 insertions(+)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 516798431328..c02c7a47eae9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1017,6 +1017,7 @@ struct kvm_x86_ops {
 	void (*handle_external_intr)(struct kvm_vcpu *vcpu);
 	bool (*mpx_supported)(void);
 	bool (*xsaves_supported)(void);
+	bool (*umip_emulated)(void);
 
 	int (*check_nested_events)(struct kvm_vcpu *vcpu, bool external_intr);
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 13f5d4217e4f..f3fc225f5ebb 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -325,6 +325,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	unsigned f_invpcid = kvm_x86_ops->invpcid_supported() ? F(INVPCID) : 0;
 	unsigned f_mpx = kvm_mpx_supported() ? F(MPX) : 0;
 	unsigned f_xsaves = kvm_x86_ops->xsaves_supported() ? F(XSAVES) : 0;
+	unsigned f_umip = kvm_x86_ops->umip_emulated() ? F(UMIP) : 0;
 
 	/* cpuid 1.edx */
 	const u32 kvm_cpuid_1_edx_x86_features =
@@ -476,6 +477,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			entry->ebx |= F(TSC_ADJUST);
 			entry->ecx &= kvm_cpuid_7_0_ecx_x86_features;
 			cpuid_mask(&entry->ecx, CPUID_7_ECX);
+			entry->ecx |= f_umip;
 			/* PKU is not yet implemented for shadow paging. */
 			if (!tdp_enabled || !boot_cpu_has(X86_FEATURE_OSPKE))
 				entry->ecx &= ~F(PKU);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 4e3c79530526..fb606ee6f93d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -5336,6 +5336,11 @@ static bool svm_xsaves_supported(void)
 	return false;
 }
 
+static bool svm_umip_emulated(void)
+{
+	return false;
+}
+
 static bool svm_has_wbinvd_exit(void)
 {
 	return true;
@@ -5729,6 +5734,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.invpcid_supported = svm_invpcid_supported,
 	.mpx_supported = svm_mpx_supported,
 	.xsaves_supported = svm_xsaves_supported,
+	.umip_emulated = svm_umip_emulated,
 
 	.set_supported_cpuid = svm_set_supported_cpuid,
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 561d8937fac5..24746d0b2b8e 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -9224,6 +9224,11 @@ static bool vmx_xsaves_supported(void)
 		SECONDARY_EXEC_XSAVES;
 }
 
+static bool vmx_umip_emulated(void)
+{
+	return false;
+}
+
 static void vmx_recover_nmi_blocking(struct vcpu_vmx *vmx)
 {
 	u32 exit_intr_info;
@@ -12314,6 +12319,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.handle_external_intr = vmx_handle_external_intr,
 	.mpx_supported = vmx_mpx_supported,
 	.xsaves_supported = vmx_xsaves_supported,
+	.umip_emulated = vmx_umip_emulated,
 
 	.check_nested_events = vmx_check_nested_events,
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 18/78] libbpf: prefer global symbols as bpf program name source

[Sasha Levin]

From: Roman Gushchin <guro@fb.com>

[ Upstream commit fe4d44b23f6b38194a92c6b8a50d921a071c4db4 ]

Libbpf picks the name of the first symbol in the corresponding
elf section to use as a program name. But without taking symbol's
scope into account it may end's up with some local label
as a program name. E.g.:

$ bpftool prog
1: type 15  name LBB0_10    tag 0390a5136ba23f5c
	loaded_at Dec 07/17:22  uid 0
	xlated 456B  not jited  memlock 4096B

Fix this by preferring global symbols as program name.

For instance:
$ bpftool prog
1: type 15  name bpf_prog1  tag 0390a5136ba23f5c
	loaded_at Dec 07/17:26  uid 0
	xlated 456B  not jited  memlock 4096B

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/lib/bpf/libbpf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 5aa45f89da93..cda652a12880 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -387,6 +387,8 @@ bpf_object__init_prog_names(struct bpf_object *obj)
 				continue;
 			if (sym.st_shndx != prog->idx)
 				continue;
+			if (GELF_ST_BIND(sym.st_info) != STB_GLOBAL)
+				continue;
 
 			name = elf_strptr(obj->efile.elf,
 					  obj->efile.strtabidx,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 17/78] spi: sh-msiof: Avoid writing to registers from spi_master.setup()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7ff0b53c4051145d1cf992d2f60987e6447eed4f ]

The spi_master.setup() callback must not change configuration registers,
as that could corrupt I/O that is in progress for other SPI slaves.

The only exception is the configuration of the native chip select
polarity in SPI master mode, as a wrong chip select polarity will cause
havoc during all future transfers to any other SPI slave.

Hence stop writing to registers in sh_msiof_spi_setup(), unless it is
the first call for a controller using a native chip select, or unless
native chip select polarity has changed (note that you'll loose anyway
if I/O is in progress).  Even then, only do what is strictly necessary,
instead of calling sh_msiof_spi_set_pin_regs().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/spi/spi-sh-msiof.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index fcd261f98b9f..bf34e9b238af 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -55,6 +55,8 @@ struct sh_msiof_spi_priv {
 	void *rx_dma_page;
 	dma_addr_t tx_dma_addr;
 	dma_addr_t rx_dma_addr;
+	bool native_cs_inited;
+	bool native_cs_high;
 	bool slave_aborted;
 };
 
@@ -528,8 +530,7 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 {
 	struct device_node	*np = spi->master->dev.of_node;
 	struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
-
-	pm_runtime_get_sync(&p->pdev->dev);
+	u32 clr, set, tmp;
 
 	if (!np) {
 		/*
@@ -539,19 +540,31 @@ static int sh_msiof_spi_setup(struct spi_device *spi)
 		spi->cs_gpio = (uintptr_t)spi->controller_data;
 	}
 
-	/* Configure pins before deasserting CS */
-	sh_msiof_spi_set_pin_regs(p, !!(spi->mode & SPI_CPOL),
-				  !!(spi->mode & SPI_CPHA),
-				  !!(spi->mode & SPI_3WIRE),
-				  !!(spi->mode & SPI_LSB_FIRST),
-				  !!(spi->mode & SPI_CS_HIGH));
-
-	if (spi->cs_gpio >= 0)
+	if (spi->cs_gpio >= 0) {
 		gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+		return 0;
+	}
 
+	if (spi_controller_is_slave(p->master))
+		return 0;
 
-	pm_runtime_put(&p->pdev->dev);
+	if (p->native_cs_inited &&
+	    (p->native_cs_high == !!(spi->mode & SPI_CS_HIGH)))
+		return 0;
 
+	/* Configure native chip select mode/polarity early */
+	clr = MDR1_SYNCMD_MASK;
+	set = MDR1_TRMD | TMDR1_PCON | MDR1_SYNCMD_SPI;
+	if (spi->mode & SPI_CS_HIGH)
+		clr |= BIT(MDR1_SYNCAC_SHIFT);
+	else
+		set |= BIT(MDR1_SYNCAC_SHIFT);
+	pm_runtime_get_sync(&p->pdev->dev);
+	tmp = sh_msiof_read(p, TMDR1) & ~clr;
+	sh_msiof_write(p, TMDR1, tmp | set);
+	pm_runtime_put(&p->pdev->dev);
+	p->native_cs_high = spi->mode & SPI_CS_HIGH;
+	p->native_cs_inited = true;
 	return 0;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 19/78] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

[Sasha Levin]

From: Tsang-Shian Lin <thlin@realtek.com>

[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/realtek/rtlwifi/pci.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index c2575b0b9440..1b7715fd13b1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -1555,7 +1555,14 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
 				dev_kfree_skb_irq(skb);
 				ring->idx = (ring->idx + 1) % ring->entries;
 			}
+
+			if (rtlpriv->use_new_trx_flow) {
+				rtlpci->tx_ring[i].cur_tx_rp = 0;
+				rtlpci->tx_ring[i].cur_tx_wp = 0;
+			}
+
 			ring->idx = 0;
+			ring->entries = rtlpci->txringcount[i];
 		}
 	}
 	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 20/78] rtlwifi: always initialize variables given to RT_TRACE()

[Sasha Levin]

From: Nicolas Iooss <nicolas.iooss_linux@m4x.org>

[ Upstream commit e4779162f7377baa9fb9a044555ecaae22c3f125 ]

In rtl_rx_ampdu_apply(), when rtlpriv->cfg->ops->get_btc_status()
returns false, RT_TRACE() is called with the values of variables
reject_agg and agg_size, which have not been initialized.

Always initialize these variables in order to prevent using
uninitialized values.

This issue has been found with clang. The compiler reported:

    drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable
    'agg_size' is used uninitialized whenever 'if' condition is false
    [-Werror,-Wsometimes-uninitialized]
            if (rtlpriv->cfg->ops->get_btc_status())
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/net/wireless/realtek/rtlwifi/base.c:1671:31: note:
    uninitialized use occurs here
                     reject_agg, ctrl_agg_size, agg_size);
                                                ^~~~~~~~

    drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable
    'reject_agg' is used uninitialized whenever 'if' condition
          is false [-Werror,-Wsometimes-uninitialized]
            if (rtlpriv->cfg->ops->get_btc_status())
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/net/wireless/realtek/rtlwifi/base.c:1671:4: note:
    uninitialized use occurs here
                     reject_agg, ctrl_agg_size, agg_size);
                     ^~~~~~~~~~

Fixes: 2635664e6e4a ("rtlwifi: Add rx ampdu cfg for btcoexist.")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/realtek/rtlwifi/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
index cad2272ae21b..704741d6f495 100644
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -1726,7 +1726,7 @@ int rtl_tx_agg_oper(struct ieee80211_hw *hw,
 void rtl_rx_ampdu_apply(struct rtl_priv *rtlpriv)
 {
 	struct rtl_btc_ops *btc_ops = rtlpriv->btcoexist.btc_ops;
-	u8 reject_agg, ctrl_agg_size = 0, agg_size;
+	u8 reject_agg = 0, ctrl_agg_size = 0, agg_size = 0;
 
 	if (rtlpriv->cfg->ops->get_btc_status())
 		btc_ops->btc_get_ampdu_cfg(rtlpriv, &reject_agg,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 21/78] media: bt8xx: Fix err 'bt878_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ]

This is odd to call 'pci_disable_device()' in an error path before a
coresponding successful 'pci_enable_device()'.

Return directly instead.

Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/pci/bt8xx/bt878.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/pci/bt8xx/bt878.c b/drivers/media/pci/bt8xx/bt878.c
index a5f52137d306..d4bc78b4fcb5 100644
--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -422,8 +422,7 @@ static int bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	       bt878_num);
 	if (bt878_num >= BT878_MAX) {
 		printk(KERN_ERR "bt878: Too many devices inserted\n");
-		result = -ENOMEM;
-		goto fail0;
+		return -ENOMEM;
 	}
 	if (pci_enable_device(dev))
 		return -EIO;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 22/78] ath10k: handling qos at STA side based on AP WMM enable/disable

[Sasha Levin]

From: Balaji Pothunoori <bpothuno@qti.qualcomm.com>

[ Upstream commit 07ffb4497360ae8789f05555fec8171ee952304d ]

Data packets are not sent by STA in case of STA joined to
non QOS AP (WMM disabled AP). This is happening because of STA
is sending data packets to firmware from host with qos enabled
along with non qos queue value(TID = 16).
Due to qos enabled, firmware is discarding the packet.

This patch fixes this issue by updating the qos based on station
WME capability field if WMM is disabled in AP.

This patch is required by 10.4 family chipsets like
QCA4019/QCA9888/QCA9884/QCA99X0.
Firmware Versoin : 10.4-3.5.1-00018.

For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch
has no effect.

Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0a947eef348d..2616b9938077 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2563,7 +2563,7 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
 		}
 		break;
 	case WMI_VDEV_TYPE_STA:
-		if (vif->bss_conf.qos)
+		if (sta->wme)
 			arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
 		break;
 	case WMI_VDEV_TYPE_IBSS:
-- 
2.14.1

[PATCH AUTOSEL for 4.15 23/78] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart

[Sasha Levin]

From: Ron Economos <w6rz@comcast.net>

[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ]

On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.

Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.

Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/dvb-frontends/si2168.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
index 41d9c513b7e8..539399dac551 100644
--- a/drivers/media/dvb-frontends/si2168.c
+++ b/drivers/media/dvb-frontends/si2168.c
@@ -14,6 +14,8 @@
  *    GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
+
 #include "si2168_priv.h"
 
 static const struct dvb_frontend_ops si2168_ops;
@@ -435,6 +437,7 @@ static int si2168_init(struct dvb_frontend *fe)
 		if (ret)
 			goto err;
 
+		udelay(100);
 		memcpy(cmd.args, "\x85", 1);
 		cmd.wlen = 1;
 		cmd.rlen = 1;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 24/78] qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect

[Sasha Levin]

From: Bjørn Mork <bjorn@mork.no>

[ Upstream commit 245d21190aec547c0de64f70c0e6de871c185a24 ]

It has been reported that the dummy byte we add to avoid
ZLPs can be forwarded by the modem to the PGW/GGSN, and that
some operators will drop the connection if this happens.

In theory, QMI devices are based on CDC ECM and should as such
both support ZLPs and silently ignore the dummy byte.  The latter
assumption failed.  Let's test out the first.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/usb/qmi_wwan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index e7114c34fe4b..76ac48095c29 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -826,7 +826,7 @@ static int qmi_wwan_resume(struct usb_interface *intf)
 
 static const struct driver_info	qmi_wwan_info = {
 	.description	= "WWAN/QMI device",
-	.flags		= FLAG_WWAN,
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind		= qmi_wwan_bind,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
@@ -835,7 +835,7 @@ static const struct driver_info	qmi_wwan_info = {
 
 static const struct driver_info	qmi_wwan_info_quirk_dtr = {
 	.description	= "WWAN/QMI device",
-	.flags		= FLAG_WWAN,
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind		= qmi_wwan_bind,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 26/78] serial: 8250_dw: Disable clock on error

[Sasha Levin]

From: Stefan Potyra <Stefan.Potyra@elektrobit.com>

[ Upstream commit 8af016aa5a27c6a2505460eb4d83f1e70c38dc43 ]

If there is no clock rate for uartclk defined, disable the previously
enabled clock again.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 23f5b3fdd04e serial: 8250_dw: only get the clock rate in one place
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/serial/8250/8250_dw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 7070203e3157..cd1b94a0f451 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -509,7 +509,8 @@ static int dw8250_probe(struct platform_device *pdev)
 	/* If no clock rate is defined, fail. */
 	if (!p->uartclk) {
 		dev_err(dev, "clock rate not defined\n");
-		return -EINVAL;
+		err = -EINVAL;
+		goto err_clk;
 	}
 
 	data->pclk = devm_clk_get(dev, "apb_pclk");
-- 
2.14.1

[PATCH AUTOSEL for 4.15 25/78] tty: goldfish: Enable 'earlycon' only if built-in

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 6a28fd2bbc94bfca105632e5ef8a9dbe63ba0b39 ]

Commit 3840ed9548f7 ("tty: goldfish: Implement support for kernel
'earlycon' parameter") breaks an allmodconfig config on x86:
|  LD      vmlinux.o
|  MODPOST vmlinux.o
|drivers/tty/serial/earlycon.o: In function `parse_options':
|drivers/tty/serial/earlycon.c:97: undefined reference to `uart_parse_earlycon'
|Makefile:1005: recipe for target 'vmlinux' failed

earlycon.c::parse_options() invokes uart_parse_earlycon() from serial_core.c
which is compiled=m because GOLDFISH_TTY itself (and most others) are =m.
To avoid that, I'm adding the _CONSOLE config option which is selected if the
GOLDFISH module itself is =y since it doesn't need the early bits for the =m
case (other drivers do the same dance).
The alternative would be to move uart_parse_earlycon() from
serial_core.c to earlycon.c (we don't have that many users of that
function).

Fixes: 3840ed9548f7 ("tty: goldfish: Implement support for kernel
       'earlycon' parameter")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Miodrag Dinic <miodrag.dinic@mips.com>
Acked-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/Kconfig    | 6 +++++-
 drivers/tty/goldfish.c | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc2b4d9433ed..b811442c5ce6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -394,10 +394,14 @@ config GOLDFISH_TTY
 	depends on GOLDFISH
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
-	select SERIAL_EARLYCON
 	help
 	  Console and system TTY driver for the Goldfish virtual platform.
 
+config GOLDFISH_TTY_EARLY_CONSOLE
+	bool
+	default y if GOLDFISH_TTY=y
+	select SERIAL_EARLYCON
+
 config DA_TTY
 	bool "DA TTY"
 	depends on METAG_DA
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 7f657bb5113c..1c1bd0afcd48 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -433,6 +433,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
 static void gf_early_console_putchar(struct uart_port *port, int ch)
 {
 	__raw_writel(ch, port->membase);
@@ -456,6 +457,7 @@ static int __init gf_earlycon_setup(struct earlycon_device *device,
 }
 
 OF_EARLYCON_DECLARE(early_gf_tty, "google,goldfish-tty", gf_earlycon_setup);
+#endif
 
 static const struct of_device_id goldfish_tty_of_match[] = {
 	{ .compatible = "google,goldfish-tty", },
-- 
2.14.1

[PATCH AUTOSEL for 4.15 27/78] cros_ec: fix nul-termination for firmware build info

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ]

As gcc-8 reports, we zero out the wrong byte:

drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version':
drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds]

This changes the code back to what it did before changing to a
zero-length array structure.

Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/chrome/cros_ec_sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
index f3baf9973989..24f1630a8b3f 100644
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -187,7 +187,7 @@ static ssize_t show_ec_version(struct device *dev,
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    EC error %d\n", msg->result);
 	else {
-		msg->data[sizeof(msg->data) - 1] = '\0';
+		msg->data[EC_HOST_PARAM_SIZE - 1] = '\0';
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    %s\n", msg->data);
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.15 28/78] watchdog: Fix potential kref imbalance when opening watchdog

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 4bcd615fad6adddc68b058d498b30a9e0e0db77a ]

If a watchdog driver's open function sets WDOG_HW_RUNNING with the
expectation that the watchdog can not be stopped, but then stops the
watchdog anyway in its stop function, kref_get() wil not be called in
watchdog_open(). If the watchdog then stops on close, WDOG_HW_RUNNING
will be cleared and kref_put() will be called, causing a kref imbalance.
As result the character device data structure will be released, which in
turn will cause the system to crash on the next call to watchdog_open().

Fixes: ee142889e32f5 ("watchdog: Introduce WDOG_HW_RUNNING flag")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/watchdog/watchdog_dev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 1e971a50d7fb..12fe47d8237b 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -769,6 +769,7 @@ static int watchdog_open(struct inode *inode, struct file *file)
 {
 	struct watchdog_core_data *wd_data;
 	struct watchdog_device *wdd;
+	bool hw_running;
 	int err;
 
 	/* Get the corresponding watchdog device */
@@ -788,7 +789,8 @@ static int watchdog_open(struct inode *inode, struct file *file)
 	 * If the /dev/watchdog device is open, we don't want the module
 	 * to be unloaded.
 	 */
-	if (!watchdog_hw_running(wdd) && !try_module_get(wdd->ops->owner)) {
+	hw_running = watchdog_hw_running(wdd);
+	if (!hw_running && !try_module_get(wdd->ops->owner)) {
 		err = -EBUSY;
 		goto out_clear;
 	}
@@ -799,7 +801,7 @@ static int watchdog_open(struct inode *inode, struct file *file)
 
 	file->private_data = wd_data;
 
-	if (!watchdog_hw_running(wdd))
+	if (!hw_running)
 		kref_get(&wd_data->kref);
 
 	/* dev/watchdog is a virtual (and thus non-seekable) filesystem */
-- 
2.14.1

[PATCH AUTOSEL for 4.15 30/78] platform/chrome: Use proper protocol transfer function

[Sasha Levin]

From: Shawn Nematbakhsh <shawnn@chromium.org>

[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ]

pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had
one instance of these functions correct, but not the second, fall-back
case. We use the fall-back only when the first command returns an
IN_PROGRESS status, which is only used on some EC firmwares where we
don't want to constantly poll the bus, but instead back off and
sleep/retry for a little while.

Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton")
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/chrome/cros_ec_proto.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 8dfa7fcb1248..e7bbdf947bbc 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -60,12 +60,14 @@ static int send_command(struct cros_ec_device *ec_dev,
 			struct cros_ec_command *msg)
 {
 	int ret;
+	int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg);
 
 	if (ec_dev->proto_version > 2)
-		ret = ec_dev->pkt_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->pkt_xfer;
 	else
-		ret = ec_dev->cmd_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->cmd_xfer;
 
+	ret = (*xfer_fxn)(ec_dev, msg);
 	if (msg->result == EC_RES_IN_PROGRESS) {
 		int i;
 		struct cros_ec_command *status_msg;
@@ -88,7 +90,7 @@ static int send_command(struct cros_ec_device *ec_dev,
 		for (i = 0; i < EC_COMMAND_RETRIES; i++) {
 			usleep_range(10000, 11000);
 
-			ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+			ret = (*xfer_fxn)(ec_dev, status_msg);
 			if (ret < 0)
 				break;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 29/78] watchdog: Fix kref imbalance seen if handle_boot_enabled=0

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 914d65f3f013ba2556c7beec5d3baac7b3292504 ]

If handle_boot_enabled is set to 0, the watchdog driver module use
counter will not be increased and kref_get() will not be called when
registering the watchdog. Subsequently, on open, this does not happen
either because the code believes that it was already done because the
hardware watchdog is marked as running.

We could introduce a state variable to indicate this state, but let's
just increase the module use counter and call kref_get() unconditionally
if the hardware watchdog is running when a driver is registering itself
to keep the code simple.

Fixes: 2501b015313fe ("watchdog: core: add option to avoid early ...")
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/watchdog/watchdog_dev.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 12fe47d8237b..95b96f3cb36f 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -967,14 +967,13 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
 	 * and schedule an immediate ping.
 	 */
 	if (watchdog_hw_running(wdd)) {
-		if (handle_boot_enabled) {
-			__module_get(wdd->ops->owner);
-			kref_get(&wd_data->kref);
+		__module_get(wdd->ops->owner);
+		kref_get(&wd_data->kref);
+		if (handle_boot_enabled)
 			queue_delayed_work(watchdog_wq, &wd_data->work, 0);
-		} else {
+		else
 			pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
-					wdd->id);
-		}
+				wdd->id);
 	}
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 31/78] dmaengine: zynqmp_dma: Fix race condition in the probe

[Sasha Levin]

From: Kedareswara rao Appana <appana.durga.rao@xilinx.com>

[ Upstream commit 5ba080aada5e739165e0f38d5cc3b04c82b323c8 ]

Incase of interrupt property is not present,
Driver is trying to free an invalid irq,
This patch fixes it by adding a check before freeing the irq.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/xilinx/zynqmp_dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index 1ee1241ca797..5cc8ed31f26b 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -838,7 +838,8 @@ static void zynqmp_dma_chan_remove(struct zynqmp_dma_chan *chan)
 	if (!chan)
 		return;
 
-	devm_free_irq(chan->zdev->dev, chan->irq, chan);
+	if (chan->irq)
+		devm_free_irq(chan->zdev->dev, chan->irq, chan);
 	tasklet_kill(&chan->tasklet);
 	list_del(&chan->common.device_node);
 	clk_disable_unprepare(chan->clk_apb);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 32/78] drm/tilcdc: ensure nonatomic iowrite64 is not used

[Sasha Levin]

From: Logan Gunthorpe <logang@deltatee.com>

[ Upstream commit 4e5ca2d930aa8714400aedf4bf1dc959cb04280f ]

Add a check to ensure iowrite64 is only used if it is atomic.

It was decided in [1] that the tilcdc driver should not be using an
atomic operation (so it was left out of this patchset). However, it turns
out that through the drm code, a nonatomic header is actually included:

include/linux/io-64-nonatomic-lo-hi.h
is included from include/drm/drm_os_linux.h:9:0,
            from include/drm/drmP.h:74,
            from include/drm/drm_modeset_helper.h:26,
            from include/drm/drm_atomic_helper.h:33,
            from drivers/gpu/drm/tilcdc/tilcdc_crtc.c:19:

And thus, without this change, this patchset would inadvertantly
change the behaviour of the tilcdc driver.

[1] lkml.kernel.org/r/CAK8P3a2HhO_zCnsTzq7hmWSz5La5Thu19FWZpun16iMnyyNreQ@mail.gmail.com

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_regs.h b/drivers/gpu/drm/tilcdc/tilcdc_regs.h
index 9d528c0a67a4..5048ebb86835 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_regs.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_regs.h
@@ -133,7 +133,7 @@ static inline void tilcdc_write64(struct drm_device *dev, u32 reg, u64 data)
 	struct tilcdc_drm_private *priv = dev->dev_private;
 	volatile void __iomem *addr = priv->mmio + reg;
 
-#ifdef iowrite64
+#if defined(iowrite64) && !defined(iowrite64_is_nonatomic)
 	iowrite64(data, addr);
 #else
 	__iowmb();
-- 
2.14.1

[PATCH AUTOSEL for 4.15 33/78] mmc: avoid removing non-removable hosts during suspend

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit de8dcc3d2c0e08e5068ee1e26fc46415c15e3637 ]

The Weibu F3C MiniPC has an onboard AP6255 module, presenting
two SDIO functions on a single MMC host (Bluetooth/btsdio and
WiFi/brcmfmac), and the mmc layer correctly detects this as
non-removable.

After suspend/resume, the wifi and bluetooth interfaces disappear
and do not get probed again.

The conditions here are:

 1. During suspend, we reach mmc_pm_notify()

 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can
    suspend the SDIO host. However, mmc_sdio_pre_suspend() returns
    -ENOSYS because btsdio_driver does not have a suspend method.

 3. mmc_pm_notify() proceeds to remove the card

 4. Upon resume, mmc_rescan() does nothing with this host, because of
    the rescan_entered check which aims to only scan a non-removable
    device a single time (i.e. during boot).

Fix the loss of functionality by detecting that we are unable to
suspend a non-removable host, so avoid the forced removal in that
case. The comment above this function already indicates that this
code was only intended for removable devices.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/core/core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 1f0f44f4dd5f..af194640dbc6 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2959,6 +2959,14 @@ static int mmc_pm_notify(struct notifier_block *notify_block,
 		if (!err)
 			break;
 
+		if (!mmc_card_is_removable(host)) {
+			dev_warn(mmc_dev(host),
+				 "pre_suspend failed for non-removable host: "
+				 "%d\n", err);
+			/* Avoid removing non-removable hosts */
+			break;
+		}
+
 		/* Calling bus_ops->remove() with a claimed host can deadlock */
 		host->bus_ops->remove(host);
 		mmc_claim_host(host);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 34/78] mmc: block: fix logical error to avoid memory leak

[Sasha Levin]

From: "Liu, Changcheng" <changcheng.liu@intel.com>

[ Upstream commit 0be55579a127916ebe39db2a74d906a2dfceed42 ]

If the MMC_DRV_OP_GET_EXT_CSD request completes successfully, then
ext_csd must be freed, but in one case it was not. Fix that.

Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/core/block.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index ccfa98af1dd3..b737a9540331 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -2623,6 +2623,7 @@ static int mmc_ext_csd_open(struct inode *inode, struct file *filp)
 
 	if (n != EXT_CSD_STR_LEN) {
 		err = -EINVAL;
+		kfree(ext_csd);
 		goto out_free;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 35/78] /dev/mem: Add bounce buffer for copy-out

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 22ec1a2aea73b9dfe340dff7945bd85af4cc6280 ]

As done for /proc/kcore in

  commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")

this adds a bounce buffer when reading memory via /dev/mem. This
is needed to allow kernel text memory to be read out when built with
CONFIG_HARDENED_USERCOPY (which refuses to read out kernel text) and
without CONFIG_STRICT_DEVMEM (which would have refused to read any RAM
contents at all).

Since this build configuration isn't common (most systems with
CONFIG_HARDENED_USERCOPY also have CONFIG_STRICT_DEVMEM), this also tries
to inform Kconfig about the recommended settings.

This patch is modified from Brad Spengler/PaX Team's changes to /dev/mem
code in the last public patch of grsecurity/PaX based on my understanding
of the code. Changes or omissions from the original code are mine and
don't reflect the original grsecurity/PaX code.

Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Fixes: f5509cc18daa ("mm: Hardened usercopy")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/mem.c | 27 ++++++++++++++++++++++-----
 security/Kconfig   |  1 +
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 6aefe5370e5b..052011bcf100 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -107,6 +107,8 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 	phys_addr_t p = *ppos;
 	ssize_t read, sz;
 	void *ptr;
+	char *bounce;
+	int err;
 
 	if (p != *ppos)
 		return 0;
@@ -129,15 +131,22 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 	}
 #endif
 
+	bounce = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!bounce)
+		return -ENOMEM;
+
 	while (count > 0) {
 		unsigned long remaining;
 		int allowed;
 
 		sz = size_inside_page(p, count);
 
+		err = -EPERM;
 		allowed = page_is_allowed(p >> PAGE_SHIFT);
 		if (!allowed)
-			return -EPERM;
+			goto failed;
+
+		err = -EFAULT;
 		if (allowed == 2) {
 			/* Show zeros for restricted memory. */
 			remaining = clear_user(buf, sz);
@@ -149,24 +158,32 @@ static ssize_t read_mem(struct file *file, char __user *buf,
 			 */
 			ptr = xlate_dev_mem_ptr(p);
 			if (!ptr)
-				return -EFAULT;
-
-			remaining = copy_to_user(buf, ptr, sz);
+				goto failed;
 
+			err = probe_kernel_read(bounce, ptr, sz);
 			unxlate_dev_mem_ptr(p, ptr);
+			if (err)
+				goto failed;
+
+			remaining = copy_to_user(buf, bounce, sz);
 		}
 
 		if (remaining)
-			return -EFAULT;
+			goto failed;
 
 		buf += sz;
 		p += sz;
 		count -= sz;
 		read += sz;
 	}
+	kfree(bounce);
 
 	*ppos += read;
 	return read;
+
+failed:
+	kfree(bounce);
+	return err;
 }
 
 static ssize_t write_mem(struct file *file, const char __user *buf,
diff --git a/security/Kconfig b/security/Kconfig
index b0cb9a5f9448..3709db95027f 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -154,6 +154,7 @@ config HARDENED_USERCOPY
 	bool "Harden memory copies between kernel and userspace"
 	depends on HAVE_HARDENED_USERCOPY_ALLOCATOR
 	select BUG
+	imply STRICT_DEVMEM
 	help
 	  This option checks for obviously wrong memory regions when
 	  copying memory to/from the kernel (via copy_to_user() and
-- 
2.14.1

[PATCH AUTOSEL for 4.15 36/78] net: phy: meson-gxl: check phy_write return value

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 9042b46eda33ef5db3cdfc9e12b3c8cabb196141 ]

Always check phy_write return values. Better to be safe than sorry

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/meson-gxl.c | 50 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index 842eb871a6e3..f431c83ba0b5 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -26,27 +26,53 @@
 
 static int meson_gxl_config_init(struct phy_device *phydev)
 {
+	int ret;
+
 	/* Enable Analog and DSP register Bank access by */
-	phy_write(phydev, 0x14, 0x0000);
-	phy_write(phydev, 0x14, 0x0400);
-	phy_write(phydev, 0x14, 0x0000);
-	phy_write(phydev, 0x14, 0x0400);
+	ret = phy_write(phydev, 0x14, 0x0000);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x0400);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x0000);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x0400);
+	if (ret)
+		return ret;
 
 	/* Write Analog register 23 */
-	phy_write(phydev, 0x17, 0x8E0D);
-	phy_write(phydev, 0x14, 0x4417);
+	ret = phy_write(phydev, 0x17, 0x8E0D);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x4417);
+	if (ret)
+		return ret;
 
 	/* Enable fractional PLL */
-	phy_write(phydev, 0x17, 0x0005);
-	phy_write(phydev, 0x14, 0x5C1B);
+	ret = phy_write(phydev, 0x17, 0x0005);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x5C1B);
+	if (ret)
+		return ret;
 
 	/* Program fraction FR_PLL_DIV1 */
-	phy_write(phydev, 0x17, 0x029A);
-	phy_write(phydev, 0x14, 0x5C1D);
+	ret = phy_write(phydev, 0x17, 0x029A);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x5C1D);
+	if (ret)
+		return ret;
 
 	/* Program fraction FR_PLL_DIV1 */
-	phy_write(phydev, 0x17, 0xAAAA);
-	phy_write(phydev, 0x14, 0x5C1C);
+	ret = phy_write(phydev, 0x17, 0xAAAA);
+	if (ret)
+		return ret;
+	ret = phy_write(phydev, 0x14, 0x5C1C);
+	if (ret)
+		return ret;
 
 	return 0;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 37/78] sfp: fix EEPROM reading in the case of non-SFF8472 SFPs

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 2794ffc441dde3109804085dc745e8014a4de224 ]

The EEPROM reading was trying to read from the second EEPROM address
if we requested the last byte from the SFF8079 EEPROM, which caused a
failure when the second EEPROM is not present.  Discovered with a
S-RJ01 SFP module.  Fix this.

Fixes: 73970055450e ("sfp: add SFP module support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/sfp.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 9dfc1c4c954f..dec35888c429 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -683,20 +683,19 @@ static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee,
 		len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN);
 		len -= first;
 
-		ret = sfp->read(sfp, false, first, data, len);
+		ret = sfp_read(sfp, false, first, data, len);
 		if (ret < 0)
 			return ret;
 
 		first += len;
 		data += len;
 	}
-	if (first >= ETH_MODULE_SFF_8079_LEN &&
-	    first < ETH_MODULE_SFF_8472_LEN) {
+	if (first < ETH_MODULE_SFF_8472_LEN && last > ETH_MODULE_SFF_8079_LEN) {
 		len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN);
 		len -= first;
 		first -= ETH_MODULE_SFF_8079_LEN;
 
-		ret = sfp->read(sfp, true, first, data, len);
+		ret = sfp_read(sfp, true, first, data, len);
 		if (ret < 0)
 			return ret;
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.15 38/78] sfp: fix non-detection of PHY

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 20b56ed9f8adfb9a7fb1c878878c54aa4ed645c1 ]

The detection of a PHY changed in commit e98a3aabf85f ("mdio_bus: don't
return NULL from mdiobus_scan()") which now causes sfp to print an
error message.  Update for this change.

Fixes: 73970055450e ("sfp: add SFP module support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/phy/sfp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index dec35888c429..10b77ac781ca 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -315,12 +315,12 @@ static void sfp_sm_probe_phy(struct sfp *sfp)
 	msleep(T_PHY_RESET_MS);
 
 	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
-	if (IS_ERR(phy)) {
-		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+	if (phy == ERR_PTR(-ENODEV)) {
+		dev_info(sfp->dev, "no PHY detected\n");
 		return;
 	}
-	if (!phy) {
-		dev_info(sfp->dev, "no PHY detected\n");
+	if (IS_ERR(phy)) {
+		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
 		return;
 	}
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 39/78] media: s5p-mfc: Fix lock contention - request_firmware() once

[Sasha Levin]

From: Shuah Khan <shuahkh@osg.samsung.com>

[ Upstream commit f45ce9877561044090010e0eb0fad644232ded04 ]

Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.

fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.

This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().

Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.

s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.

This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:

[  552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[  552.199488]  (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.207459]
               but task is already holding lock:
[  552.213264]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[  552.220284]
               which lock already depends on the new lock.

[  552.228429]
               the existing dependency chain (in reverse order) is:
[  552.235881]
               -> #2 (&mm->mmap_sem){++++}:
[  552.241259]        __might_fault+0x80/0xb0
[  552.245331]        filldir64+0xc0/0x2f8
[  552.249144]        call_filldir+0xb0/0x14c
[  552.253214]        ext4_readdir+0x768/0x90c
[  552.257374]        iterate_dir+0x74/0x168
[  552.261360]        SyS_getdents64+0x7c/0x1a0
[  552.265608]        ret_fast_syscall+0x0/0x28
[  552.269850]
               -> #1 (&type->i_mutex_dir_key#2){++++}:
[  552.276180]        down_read+0x48/0x90
[  552.279904]        lookup_slow+0x74/0x178
[  552.283889]        walk_component+0x1a4/0x2e4
[  552.288222]        link_path_walk+0x174/0x4a0
[  552.292555]        path_openat+0x68/0x944
[  552.296541]        do_filp_open+0x60/0xc4
[  552.300528]        file_open_name+0xe4/0x114
[  552.304772]        filp_open+0x28/0x48
[  552.308499]        kernel_read_file_from_path+0x30/0x78
[  552.313700]        _request_firmware+0x3ec/0x78c
[  552.318291]        request_firmware+0x3c/0x54
[  552.322642]        s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
[  552.328358]        s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
[  552.333394]        v4l2_open+0xa0/0x104 [videodev]
[  552.338137]        chrdev_open+0xa4/0x18c
[  552.342121]        do_dentry_open+0x208/0x310
[  552.346454]        path_openat+0x28c/0x944
[  552.350526]        do_filp_open+0x60/0xc4
[  552.354512]        do_sys_open+0x118/0x1c8
[  552.358586]        ret_fast_syscall+0x0/0x28
[  552.362830]
               -> #0 (&dev->mfc_mutex){+.+.}:
               -> #0 (&dev->mfc_mutex){+.+.}:
[  552.368379]        lock_acquire+0x6c/0x88
[  552.372364]        __mutex_lock+0x68/0xa34
[  552.376437]        mutex_lock_interruptible_nested+0x1c/0x24
[  552.382086]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[  552.386939]        v4l2_mmap+0x54/0x88 [videodev]
[  552.391601]        mmap_region+0x3a8/0x638
[  552.395673]        do_mmap+0x330/0x3a4
[  552.399400]        vm_mmap_pgoff+0x90/0xb8
[  552.403472]        SyS_mmap_pgoff+0x90/0xc0
[  552.407632]        ret_fast_syscall+0x0/0x28
[  552.411876]
               other info that might help us debug this:

[  552.419848] Chain exists of:
                 &dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem

[  552.431200]  Possible unsafe locking scenario:

[  552.437092]        CPU0                    CPU1
[  552.441598]        ----                    ----
[  552.446104]   lock(&mm->mmap_sem);
[  552.449484]                                lock(&type->i_mutex_dir_key#2);
[  552.456329]                                lock(&mm->mmap_sem);
[  552.462222]   lock(&dev->mfc_mutex);
[  552.465775]
                *** DEADLOCK ***

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c        | 6 ++++++
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
 drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c   | 5 +++++
 3 files changed, 14 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index bc68dbbcaec1..cac27ad510de 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1309,6 +1309,12 @@ static int s5p_mfc_probe(struct platform_device *pdev)
 		goto err_dma;
 	}
 
+	/*
+	 * Load fails if fs isn't mounted. Try loading anyway.
+	 * _open() will load it, it it fails now. Ignore failure.
+	 */
+	s5p_mfc_load_firmware(dev);
+
 	mutex_init(&dev->mfc_mutex);
 	init_waitqueue_head(&dev->queue);
 	dev->hw_lock = 0;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index 4220914529b2..76119a8cc477 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -290,6 +290,8 @@ struct s5p_mfc_priv_buf {
  * @mfc_cmds:		cmd structure holding HW commands function pointers
  * @mfc_regs:		structure holding MFC registers
  * @fw_ver:		loaded firmware sub-version
+ * @fw_get_done		flag set when request_firmware() is complete and
+ *			copied into fw_buf
  * risc_on:		flag indicates RISC is on or off
  *
  */
@@ -336,6 +338,7 @@ struct s5p_mfc_dev {
 	struct s5p_mfc_hw_cmds *mfc_cmds;
 	const struct s5p_mfc_regs *mfc_regs;
 	enum s5p_mfc_fw_ver fw_ver;
+	bool fw_get_done;
 	bool risc_on; /* indicates if RISC is on or off */
 };
 
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
index 69ef9c23a99a..d94e59e79fe9 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -55,6 +55,9 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 	 * into kernel. */
 	mfc_debug_enter();
 
+	if (dev->fw_get_done)
+		return 0;
+
 	for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
 		if (!dev->variant->fw_name[i])
 			continue;
@@ -82,6 +85,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev)
 	}
 	memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
 	wmb();
+	dev->fw_get_done = true;
 	release_firmware(fw_blob);
 	mfc_debug_leave();
 	return 0;
@@ -93,6 +97,7 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
 	/* Before calling this function one has to make sure
 	 * that MFC is no longer processing */
 	s5p_mfc_release_priv_buf(dev, &dev->fw_buf);
+	dev->fw_get_done = false;
 	return 0;
 }
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 41/78] IB/ipoib: Avoid memory leak if the SA returns a different DGID

[Sasha Levin]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ]

The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.

Ensure the database key does not change after the SA query completes.

Demonstration of the bug is as  follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib  will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index c35c28015f8e..160c5d9bca4c 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -775,6 +775,22 @@ static void path_rec_completion(int status,
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!IS_ERR_OR_NULL(ah)) {
+		/*
+		 * pathrec.dgid is used as the database key from the LLADDR,
+		 * it must remain unchanged even if the SA returns a different
+		 * GID to use in the AH.
+		 */
+		if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			   sizeof(union ib_gid))) {
+			ipoib_dbg(
+				priv,
+				"%s got PathRec for gid %pI6 while asked for %pI6\n",
+				dev->name, pathrec->dgid.raw,
+				path->pathrec.dgid.raw);
+			memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			       sizeof(union ib_gid));
+		}
+
 		path->pathrec = *pathrec;
 
 		old_ah   = path->ah;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 40/78] rtc: ac100: Fix multiple race conditions

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

[ Upstream commit 994ec64c0a193940be7a6fd074668b9446d3b6c3 ]

The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Also, the interrupt handler: ac100_rtc_irq() is dereferencing chip->rtc but
this may still be NULL when it is called, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 00000194
pgd = (ptrval)
[00000194] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 72 Comm: irq/71-ac100-rt Not tainted 4.15.0-rc1-next-20171201-dirty #120
Hardware name: Allwinner sun8i Family
task: (ptrval) task.stack: (ptrval)
PC is at mutex_lock+0x14/0x3c
LR is at ac100_rtc_irq+0x38/0xc8
pc : [<c06543a4>]    lr : [<c04d9a2c>]    psr: 60000053
sp : ee9c9f28  ip : 00000000  fp : ee9adfdc
r10: 00000000  r9 : c0a04c48  r8 : c015ed18
r7 : ee9bd600  r6 : ee9c9f28  r5 : ee9af590  r4 : c0a04c48
r3 : ef3cb3c0  r2 : 00000000  r1 : ee9af590  r0 : 00000194
Flags: nZCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4000406a  DAC: 00000051
Process irq/71-ac100-rt (pid: 72, stack limit = 0x(ptrval))
Stack: (0xee9c9f28 to 0xee9ca000)
9f20:                   00000000 7c2fd1be c015ed18 ee9adf40 ee9c0400 ee9c0400
9f40: ee9adf40 c015ed34 ee9c8000 ee9adf64 ee9c0400 c015f040 ee9adf80 00000000
9f60: c015ee24 7c2fd1be ee9adfc0 ee9adf80 00000000 ee9c8000 ee9adf40 c015eef4
9f80: ef1eba34 c0138f14 ee9c8000 ee9adf80 c0138df4 00000000 00000000 00000000
9fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
[<c06543a4>] (mutex_lock) from [<c04d9a2c>] (ac100_rtc_irq+0x38/0xc8)
[<c04d9a2c>] (ac100_rtc_irq) from [<c015ed34>] (irq_thread_fn+0x1c/0x54)
[<c015ed34>] (irq_thread_fn) from [<c015f040>] (irq_thread+0x14c/0x214)
[<c015f040>] (irq_thread) from [<c0138f14>] (kthread+0x120/0x150)
[<c0138f14>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)

Solve both issues by moving to
devm_rtc_allocate_device()/rtc_register_device()

Reported-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/rtc/rtc-ac100.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-ac100.c b/drivers/rtc/rtc-ac100.c
index 9e336184491c..0e358d4b6738 100644
--- a/drivers/rtc/rtc-ac100.c
+++ b/drivers/rtc/rtc-ac100.c
@@ -567,6 +567,12 @@ static int ac100_rtc_probe(struct platform_device *pdev)
 		return chip->irq;
 	}
 
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
+		return PTR_ERR(chip->rtc);
+
+	chip->rtc->ops = &ac100_rtc_ops;
+
 	ret = devm_request_threaded_irq(&pdev->dev, chip->irq, NULL,
 					ac100_rtc_irq,
 					IRQF_SHARED | IRQF_ONESHOT,
@@ -586,17 +592,16 @@ static int ac100_rtc_probe(struct platform_device *pdev)
 	/* clear counter alarm pending interrupts */
 	regmap_write(chip->regmap, AC100_ALM_INT_STA, AC100_ALM_INT_ENABLE);
 
-	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-ac100",
-					     &ac100_rtc_ops, THIS_MODULE);
-	if (IS_ERR(chip->rtc)) {
-		dev_err(&pdev->dev, "unable to register device\n");
-		return PTR_ERR(chip->rtc);
-	}
-
 	ret = ac100_rtc_register_clks(chip);
 	if (ret)
 		return ret;
 
+	ret = rtc_register_device(chip->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		return ret;
+	}
+
 	dev_info(&pdev->dev, "RTC enabled\n");
 
 	return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 42/78] RDMA/cma: Use correct size when writing netlink stats

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 7baaa49af3716fb31877c61f59b74d029ce15b75 ]

The code was using the src size when formatting the dst. They are almost
certainly the same value but it reads wrong.

Fixes: ce117ffac2e9 ("RDMA/cma: Export AF_IB statistics")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/cma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 6294a7001d33..3eddf2821504 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4432,7 +4432,7 @@ static int cma_get_id_stats(struct sk_buff *skb, struct netlink_callback *cb)
 					  RDMA_NL_RDMA_CM_ATTR_SRC_ADDR))
 				goto out;
 			if (ibnl_put_attr(skb, nlh,
-					  rdma_addr_size(cma_src_addr(id_priv)),
+					  rdma_addr_size(cma_dst_addr(id_priv)),
 					  cma_dst_addr(id_priv),
 					  RDMA_NL_RDMA_CM_ATTR_DST_ADDR))
 				goto out;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 44/78] iser-target: avoid reinitializing rdma contexts for isert commands

[Sasha Levin]

From: Bharat Potnuri <bharat@chelsio.com>

[ Upstream commit 66f53e6f5400578bae58db0c06d85a8820831f40 ]

isert commands that failed during isert_rdma_rw_ctx_post() are queued to
Queue-Full(QF) queue and are scheduled to be reposted during queue-full
queue processing. During this reposting, the rdma contexts are initialised
again in isert_rdma_rw_ctx_post(), which is leaking significant memory.

unreferenced object 0xffff8830201d9640 (size 64):
  comm "kworker/0:2", pid 195, jiffies 4295374851 (age 4528.436s)
  hex dump (first 32 bytes):
    00 60 8b cb 2e 00 00 00 00 10 00 00 00 00 00 00  .`..............
    00 90 e3 cb 2e 00 00 00 00 10 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8170711e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811f8ba5>] __kmalloc+0x125/0x2b0
    [<ffffffffa046b24f>] rdma_rw_ctx_init+0x15f/0x6f0 [ib_core]
    [<ffffffffa07ab644>] isert_rdma_rw_ctx_post+0xc4/0x3c0 [ib_isert]
    [<ffffffffa07ad972>] isert_put_datain+0x112/0x1c0 [ib_isert]
    [<ffffffffa07dddce>] lio_queue_data_in+0x2e/0x30 [iscsi_target_mod]
    [<ffffffffa076c322>] target_qf_do_work+0x2b2/0x4b0 [target_core_mod]
    [<ffffffff81080c3b>] process_one_work+0x1db/0x5d0
    [<ffffffff8108107d>] worker_thread+0x4d/0x3e0
    [<ffffffff81088667>] kthread+0x117/0x150
    [<ffffffff81713fa7>] ret_from_fork+0x27/0x40
    [<ffffffffffffffff>] 0xffffffffffffffff

Here is patch to use the older rdma contexts while reposting
the isert commands intead of reinitialising them.

Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/ulp/isert/ib_isert.c | 7 +++++++
 drivers/infiniband/ulp/isert/ib_isert.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 1b02283ce20e..fff40b097947 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -2124,6 +2124,9 @@ isert_rdma_rw_ctx_post(struct isert_cmd *cmd, struct isert_conn *conn,
 	u32 rkey, offset;
 	int ret;
 
+	if (cmd->ctx_init_done)
+		goto rdma_ctx_post;
+
 	if (dir == DMA_FROM_DEVICE) {
 		addr = cmd->write_va;
 		rkey = cmd->write_stag;
@@ -2151,11 +2154,15 @@ isert_rdma_rw_ctx_post(struct isert_cmd *cmd, struct isert_conn *conn,
 				se_cmd->t_data_sg, se_cmd->t_data_nents,
 				offset, addr, rkey, dir);
 	}
+
 	if (ret < 0) {
 		isert_err("Cmd: %p failed to prepare RDMA res\n", cmd);
 		return ret;
 	}
 
+	cmd->ctx_init_done = true;
+
+rdma_ctx_post:
 	ret = rdma_rw_ctx_post(&cmd->rw, conn->qp, port_num, cqe, chain_wr);
 	if (ret < 0)
 		isert_err("Cmd: %p failed to post RDMA res\n", cmd);
diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h
index d6fd248320ae..3b296bac4f60 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -126,6 +126,7 @@ struct isert_cmd {
 	struct rdma_rw_ctx	rw;
 	struct work_struct	comp_work;
 	struct scatterlist	sg;
+	bool			ctx_init_done;
 };
 
 static inline struct isert_cmd *tx_desc_to_cmd(struct iser_tx_desc *desc)
-- 
2.14.1

[PATCH AUTOSEL for 4.15 43/78] IB/umem: Fix use of npages/nmap fields

[Sasha Levin]

From: Artemy Kovalyov <artemyko@mellanox.com>

[ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ]

In ib_umem structure npages holds original number of sg entries, while
nmap is number of DMA blocks returned by dma_map_sg.

Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/core/umem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 130606c3b07c..9a4e899d94b3 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -352,7 +352,7 @@ int ib_umem_copy_from(void *dst, struct ib_umem *umem, size_t offset,
 		return -EINVAL;
 	}
 
-	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->nmap, dst, length,
+	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->npages, dst, length,
 				 offset + ib_umem_offset(umem));
 
 	if (ret < 0)
-- 
2.14.1

[PATCH AUTOSEL for 4.15 45/78] bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 06ef0ccb5a36e1feba9b413ff59a04ecc4407c1c ]

The tools/testing/selftests/bpf test program
test_dev_cgroup fails with the following error
when compiled with llvm 6.0. (I did not try
with earlier versions.)

  libbpf: load bpf program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (61) r2 = *(u32 *)(r1 +4)
  1: (b7) r0 = 0
  2: (55) if r2 != 0x1 goto pc+8
   R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv1 R10=fp0
  3: (69) r2 = *(u16 *)(r1 +0)
  invalid bpf_context access off=0 size=2
  ...

The culprit is the following statement in dev_cgroup.c:
  short type = ctx->access_type & 0xFFFF;
This code is typical as the ctx->access_type is assigned
as below in kernel/bpf/cgroup.c:
  struct bpf_cgroup_dev_ctx ctx = {
        .access_type = (access << 16) | dev_type,
        .major = major,
        .minor = minor,
  };

The compiler converts it to u16 access while
the verifier cgroup_dev_is_valid_access rejects
any non u32 access.

This patch permits the field access_type to be accessible
with type u16 and u8 as well.

Signed-off-by: Yonghong Song <yhs@fb.com>
Tested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 include/uapi/linux/bpf.h |  3 ++-
 kernel/bpf/cgroup.c      | 15 +++++++++++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 4c223ab30293..04b2f613dd06 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -995,7 +995,8 @@ struct bpf_perf_event_value {
 #define BPF_DEVCG_DEV_CHAR	(1ULL << 1)
 
 struct bpf_cgroup_dev_ctx {
-	__u32 access_type; /* (access << 16) | type */
+	/* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */
+	__u32 access_type;
 	__u32 major;
 	__u32 minor;
 };
diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
index b789ab78d28f..c1c0b60d3f2f 100644
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -568,6 +568,8 @@ static bool cgroup_dev_is_valid_access(int off, int size,
 				       enum bpf_access_type type,
 				       struct bpf_insn_access_aux *info)
 {
+	const int size_default = sizeof(__u32);
+
 	if (type == BPF_WRITE)
 		return false;
 
@@ -576,8 +578,17 @@ static bool cgroup_dev_is_valid_access(int off, int size,
 	/* The verifier guarantees that size > 0. */
 	if (off % size != 0)
 		return false;
-	if (size != sizeof(__u32))
-		return false;
+
+	switch (off) {
+	case bpf_ctx_range(struct bpf_cgroup_dev_ctx, access_type):
+		bpf_ctx_record_field_size(info, size_default);
+		if (!bpf_ctx_narrow_access_ok(off, size, size_default))
+			return false;
+		break;
+	default:
+		if (size != size_default)
+			return false;
+	}
 
 	return true;
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 46/78] PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics

[Sasha Levin]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 80d7d7a904fac3f8114448dbb8cc9fa253b10120 ]

Per PCIe r3.1, sec 5.5.1, LTR_L1.2_THRESHOLD determines whether we enter
the L1.2 Link state: if L1.2 is enabled and downstream devices have
reported that they can tolerate latency of at least LTR_L1.2_THRESHOLD, we
must enter L1.2 when CLKREQ# is de-asserted.

The implication is that LTR_L1.2_THRESHOLD is the time required to
transition the Link from L0 to L1.2 and back to L0, and per sec 5.5.3.3.1,
Figures 5-16 and 5-17, it appears that the absolute minimum time for those
transitions would be T(POWER_OFF) + T(L1.2) + T(POWER_ON) + T(COMMONMODE).

Therefore, compute LTR_L1.2_THRESHOLD as:

    2us T(POWER_OFF)
  + 4us T(L1.2)
  + T(POWER_ON)
  + T(COMMONMODE)
  = LTR_L1.2_THRESHOLD

Previously we set LTR_L1.2_THRESHOLD to a fixed value of 163840ns
(163.84us):

  #define LTR_L1_2_THRESHOLD_BITS     ((1 << 21) | (1 << 23) | (1 << 30))
  ((1 << 21) | (1 << 23) | (1 << 30)) = 0x40a00000
  LTR_L1.2_THRESHOLD_Value = (0x40a00000 & 0x03ff0000) >> 16 = 0xa0 = 160
  LTR_L1.2_THRESHOLD_Scale = (0x40a00000 & 0xe0000000) >> 29 = 0x2 (* 1024ns)
  LTR_L1.2_THRESHOLD = 160 * 1024ns = 163840ns

Obviously this doesn't account for the circuit characteristics of different
implementations.

Note that while firmware may enable LTR, Linux itself currently does not
enable LTR.  When L1.2 is enabled but LTR is not, LTR_L1.2_THRESHOLD is
ignored and we always enter L1.2 when it is enabled and CLKREQ# is
de-asserted.  So this patch should not have any effect unless firmware
enables LTR.

Fixes: f1f0366dd6be ("PCI/ASPM: Calculate and save the L1.2 timing parameters")
Link: https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Cc: Kenji Chen <kenji.chen@intel.com>
Cc: Patrick Georgi <pgeorgi@google.com>
Cc: Rajat Jain <rajatja@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/pcie/aspm.c | 71 ++++++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 24 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 9783e10da3a9..3b9b4d50cd98 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -43,18 +43,6 @@
 #define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1 |	\
 				 ASPM_STATE_L1SS)
 
-/*
- * When L1 substates are enabled, the LTR L1.2 threshold is a timing parameter
- * that decides whether L1.1 or L1.2 is entered (Refer PCIe spec for details).
- * Not sure is there is a way to "calculate" this on the fly, but maybe we
- * could turn it into a parameter in future.  This value has been taken from
- * the following files from Intel's coreboot (which is the only code I found
- * to have used this):
- * https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html
- * https://review.coreboot.org/#/c/8832/
- */
-#define LTR_L1_2_THRESHOLD_BITS	((1 << 21) | (1 << 23) | (1 << 30))
-
 struct aspm_latency {
 	u32 l0s;			/* L0s latency (nsec) */
 	u32 l1;				/* L1 latency (nsec) */
@@ -333,6 +321,32 @@ static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
 	return 0;
 }
 
+static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
+{
+	u64 threshold_ns = threshold_us * 1000;
+
+	/* See PCIe r3.1, sec 7.33.3 and sec 6.18 */
+	if (threshold_ns < 32) {
+		*scale = 0;
+		*value = threshold_ns;
+	} else if (threshold_ns < 1024) {
+		*scale = 1;
+		*value = threshold_ns >> 5;
+	} else if (threshold_ns < 32768) {
+		*scale = 2;
+		*value = threshold_ns >> 10;
+	} else if (threshold_ns < 1048576) {
+		*scale = 3;
+		*value = threshold_ns >> 15;
+	} else if (threshold_ns < 33554432) {
+		*scale = 4;
+		*value = threshold_ns >> 20;
+	} else {
+		*scale = 5;
+		*value = threshold_ns >> 25;
+	}
+}
+
 struct aspm_register_info {
 	u32 support:2;
 	u32 enabled:2;
@@ -443,6 +457,7 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
 				struct aspm_register_info *dwreg)
 {
 	u32 val1, val2, scale1, scale2;
+	u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
 
 	link->l1ss.up_cap_ptr = upreg->l1ss_cap_ptr;
 	link->l1ss.dw_cap_ptr = dwreg->l1ss_cap_ptr;
@@ -454,16 +469,7 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
 	/* Choose the greater of the two Port Common_Mode_Restore_Times */
 	val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
 	val2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
-	if (val1 > val2)
-		link->l1ss.ctl1 |= val1 << 8;
-	else
-		link->l1ss.ctl1 |= val2 << 8;
-
-	/*
-	 * We currently use LTR L1.2 threshold to be fixed constant picked from
-	 * Intel's coreboot.
-	 */
-	link->l1ss.ctl1 |= LTR_L1_2_THRESHOLD_BITS;
+	t_common_mode = max(val1, val2);
 
 	/* Choose the greater of the two Port T_POWER_ON times */
 	val1   = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
@@ -472,10 +478,27 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
 	scale2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
 
 	if (calc_l1ss_pwron(link->pdev, scale1, val1) >
-	    calc_l1ss_pwron(link->downstream, scale2, val2))
+	    calc_l1ss_pwron(link->downstream, scale2, val2)) {
 		link->l1ss.ctl2 |= scale1 | (val1 << 3);
-	else
+		t_power_on = calc_l1ss_pwron(link->pdev, scale1, val1);
+	} else {
 		link->l1ss.ctl2 |= scale2 | (val2 << 3);
+		t_power_on = calc_l1ss_pwron(link->downstream, scale2, val2);
+	}
+
+	/*
+	 * Set LTR_L1.2_THRESHOLD to the time required to transition the
+	 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
+	 * downstream devices report (via LTR) that they can tolerate at
+	 * least that much latency.
+	 *
+	 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
+	 * Table 5-11.  T(POWER_OFF) is at most 2us and T(L1.2) is at
+	 * least 4us.
+	 */
+	l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
+	encode_l12_threshold(l1_2_threshold, &scale, &value);
+	link->l1ss.ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
 }
 
 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
-- 
2.14.1

[PATCH AUTOSEL for 4.15 48/78] omapdrm: panel: fix compatible vendor string for td028ttec1

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit c1b9d4c75cd549e08bd0596d7f9dcc20f7f6e8fa ]

The vendor name was "toppoly" but other panels and the vendor list
have defined it as "tpo". So let's fix it in driver and bindings.

We keep the old definition in parallel to stay compatible with
potential older DTB setup.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../display/panel/{toppoly,td028ttec1.txt => tpo,td028ttec1.txt}      | 4 ++--
 drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c               | 3 +++
 drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c      | 3 +++
 3 files changed, 8 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/display/panel/{toppoly,td028ttec1.txt => tpo,td028ttec1.txt} (84%)

diff --git a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
similarity index 84%
rename from Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt
rename to Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
index 7175dc3740ac..ed34253d9fb1 100644
--- a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
@@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel
 ========================
 
 Required properties:
-- compatible: "toppoly,td028ttec1"
+- compatible: "tpo,td028ttec1"
 
 Optional properties:
 - label: a symbolic name for the panel
@@ -14,7 +14,7 @@ Example
 -------
 
 lcd-panel: td028ttec1@0 {
-	compatible = "toppoly,td028ttec1";
+	compatible = "tpo,td028ttec1";
 	reg = <0>;
 	spi-max-frequency = <100000>;
 	spi-cpol;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index 0a38a0e8c925..a0dfa14f4fab 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -452,6 +452,8 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
 }
 
 static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,tpo,td028ttec1", },
+	/* keep to not break older DTB */
 	{ .compatible = "omapdss,toppoly,td028ttec1", },
 	{},
 };
@@ -471,6 +473,7 @@ static struct spi_driver td028ttec1_spi_driver = {
 
 module_spi_driver(td028ttec1_spi_driver);
 
+MODULE_ALIAS("spi:tpo,td028ttec1");
 MODULE_ALIAS("spi:toppoly,td028ttec1");
 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
index 57e9e146ff74..4aeb908f2d1e 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -455,6 +455,8 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
 }
 
 static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,tpo,td028ttec1", },
+	/* keep to not break older DTB */
 	{ .compatible = "omapdss,toppoly,td028ttec1", },
 	{},
 };
@@ -474,6 +476,7 @@ static struct spi_driver td028ttec1_spi_driver = {
 
 module_spi_driver(td028ttec1_spi_driver);
 
+MODULE_ALIAS("spi:tpo,td028ttec1");
 MODULE_ALIAS("spi:toppoly,td028ttec1");
 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
-- 
2.14.1

[PATCH AUTOSEL for 4.15 47/78] vgacon: Set VGA struct resource types

[Sasha Levin]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit c82084117f79bcae085e40da526253736a247120 ]

Set the resource type when we reserve VGA-related I/O port resources.

The resource code doesn't actually look at the type, so it inserts
resources without a type in the tree correctly even without this change.
But if we ever print a resource without a type, it looks like this:

  vga+ [??? 0x000003c0-0x000003df flags 0x0]

Setting the type means it will be printed correctly as:

  vga+ [io  0x000003c0-0x000003df]

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/alpha/kernel/console.c    |  1 +
 drivers/video/console/vgacon.c | 34 ++++++++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 8e9a41966881..5476279329a6 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -21,6 +21,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 445b1dc5d441..a17ba1465815 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -422,7 +422,10 @@ static const char *vgacon_startup(void)
 		vga_video_port_val = VGA_CRT_DM;
 		if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) {
 			static struct resource ega_console_resource =
-			    { .name = "ega", .start = 0x3B0, .end = 0x3BF };
+			    { .name	= "ega",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_EGAM;
 			vga_vram_size = 0x8000;
 			display_desc = "EGA+";
@@ -430,9 +433,15 @@ static const char *vgacon_startup(void)
 					 &ega_console_resource);
 		} else {
 			static struct resource mda1_console_resource =
-			    { .name = "mda", .start = 0x3B0, .end = 0x3BB };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BB };
 			static struct resource mda2_console_resource =
-			    { .name = "mda", .start = 0x3BF, .end = 0x3BF };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3BF,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_MDA;
 			vga_vram_size = 0x2000;
 			display_desc = "*MDA";
@@ -454,15 +463,21 @@ static const char *vgacon_startup(void)
 			vga_vram_size = 0x8000;
 
 			if (!screen_info.orig_video_isVGA) {
-				static struct resource ega_console_resource
-				    = { .name = "ega", .start = 0x3C0, .end = 0x3DF };
+				static struct resource ega_console_resource =
+				    { .name	= "ega",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_EGAC;
 				display_desc = "EGA";
 				request_resource(&ioport_resource,
 						 &ega_console_resource);
 			} else {
-				static struct resource vga_console_resource
-				    = { .name = "vga+", .start = 0x3C0, .end = 0x3DF };
+				static struct resource vga_console_resource =
+				    { .name	= "vga+",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_VGAC;
 				display_desc = "VGA+";
 				request_resource(&ioport_resource,
@@ -494,7 +509,10 @@ static const char *vgacon_startup(void)
 			}
 		} else {
 			static struct resource cga_console_resource =
-			    { .name = "cga", .start = 0x3D4, .end = 0x3D5 };
+			    { .name	= "cga",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3D4,
+			      .end	= 0x3D5 };
 			vga_video_type = VIDEO_TYPE_CGA;
 			vga_vram_size = 0x2000;
 			display_desc = "*CGA";
-- 
2.14.1

[PATCH AUTOSEL for 4.15 51/78] pty: cancel pty slave port buf's work in tty_release

[Sasha Levin]

From: Sahara <keun-o.park@darkmatter.ae>

[ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ]

In case that CONFIG_SLUB_DEBUG is on and pty is used, races between
release_one_tty and flush_to_ldisc work threads may happen and lead
to use-after-free condition on tty->link->port. Because SLUB_DEBUG
is turned on, freed tty->link->port is filled with POISON_FREE value.
So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc
could return without a problem by checking if tty is NULL.

CPU 0                                 CPU 1
-----                                 -----
release_tty                           pty_write
   cancel_work_sync(tty)                 to = tty->link
   tty_kref_put(tty->link)               tty_schedule_flip(to->port)
      << workqueue >>                 ...
      release_one_tty                 ...
         pty_cleanup                  ...
            kfree(tty->link->port)       << workqueue >>
                                         flush_to_ldisc
                                            tty = READ_ONCE(port->itty)
                                            tty is 0x6b6b6b6b6b6b6b6b
                                            !!PANIC!! access tty->ldisc

 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93
 pgd = ffffffc0eb1c3000
 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000
 ------------[ cut here ]------------
 Kernel BUG at ffffff800851154c [verbose debug info unavailable]
 Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP
 CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G        W 3.18.31-g0a58eeb #1
 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT)
 Workqueue: events_unbound flush_to_ldisc
 task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000
 PC is at ldsem_down_read_trylock+0x0/0x4c
 LR is at tty_ldisc_ref+0x24/0x4c
 pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145
 sp : ffffffc0ed627cd0
 x29: ffffffc0ed627cd0 x28: 0000000000000000
 x27: ffffff8009e05000 x26: ffffffc0d382cfa0
 x25: 0000000000000000 x24: ffffff800a012f08
 x23: 0000000000000000 x22: ffffffc0703fbc88
 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93
 x19: 0000000000000000 x18: 0000000000000001
 x17: 00e80000f80d6f53 x16: 0000000000000001
 x15: 0000007f7d826fff x14: 00000000000000a0
 x13: 0000000000000000 x12: 0000000000000109
 x11: 0000000000000000 x10: 0000000000000000
 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580
 x7 : 0000000000000000 x6 : ffffff800a42e000
 x5 : 00000000000003fc x4 : 0000000003bd1201
 x3 : 0000000000000001 x2 : 0000000000000001
 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93

Signed-off-by: Sahara <keun-o.park@darkmatter.ae>

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/tty/tty_io.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 4b506f2d3522..688bd25aa6b0 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1482,6 +1482,8 @@ static void release_tty(struct tty_struct *tty, int idx)
 	if (tty->link)
 		tty->link->port->itty = NULL;
 	tty_buffer_cancel_work(tty->port);
+	if (tty->link)
+		tty_buffer_cancel_work(tty->link->port);
 
 	tty_kref_put(tty->link);
 	tty_kref_put(tty);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 49/78] mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable

[Sasha Levin]

From: Zhoujie Wu <zjwu@marvell.com>

[ Upstream commit 8d876bf472dba73c015cea9feea80dcb80626a7c ]

According to SD spec 3.00 3.6.1 signal voltage switch
procedure step 6~8,
(6) Set 1.8V Signal Enable in the Host Control 2 register.
(7) Wait 5ms. 1.8V voltage regulator shall be stable within this period.
(8) If 1.8V Signal Enable is cleared by Host Controller, go to step (12).
Host should wait 5ms after set 1.8V signal enable bit in
Host Control 2 register and check if 1.8V is stable or not.

But current code checks this bit right after set it.
On some platforms with xenon controller found the bit is
cleared right away and host reports "1.8V regulator output
did not became stable" and 5ms delay can help.

Implement voltage_switch callback for xenon controller to add 5ms
delay to make sure the 1.8V signal enable bit is set by controller.

Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mmc/host/sdhci-xenon.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 0842bbc2d7ad..4d0791f6ec23 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -230,7 +230,14 @@ static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
 		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
 }
 
+static void xenon_voltage_switch(struct sdhci_host *host)
+{
+	/* Wait for 5ms after set 1.8V signal enable bit */
+	usleep_range(5000, 5500);
+}
+
 static const struct sdhci_ops sdhci_xenon_ops = {
+	.voltage_switch		= xenon_voltage_switch,
 	.set_clock		= sdhci_set_clock,
 	.set_power		= xenon_set_power,
 	.set_bus_width		= sdhci_set_bus_width,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 50/78] drm/omap: DMM: Check for DMM readiness after successful transaction commit

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ]

Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.

The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index c60a85e82c6d..fd05f7e9f43f 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -298,7 +298,12 @@ static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
 				msecs_to_jiffies(100))) {
 			dev_err(dmm->dev, "timed out waiting for done\n");
 			ret = -ETIMEDOUT;
+			goto cleanup;
 		}
+
+		/* Check the engine status before continue */
+		ret = wait_status(engine, DMM_PATSTATUS_READY |
+				  DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
 	}
 
 cleanup:
-- 
2.14.1

[PATCH AUTOSEL for 4.15 53/78] PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit a134a457ed985dca8cce7ac4ea66129ea70eba73 ]

->get_msi() now checks MSI_EN bit in the MSI CAPABILITY register to
find whether the host supports MSI instead of using the
MSI ADDRESS in the MSI CAPABILITY register.

This fixes the issue with the following sequence
  'modprobe pci_endpoint_test' enables MSI
  'rmmod pci_endpoint_test' disables MSI but MSI address (in EP's
	capability register) has a valid value
  'modprobe pci_endpoint_test no_msi=1' - Since MSI address (in EP's
	capability register) has a valid value (set during the previous
	insertion of the module), EP thinks host supports MSI.

Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/dwc/pcie-designware-ep.c | 12 +++---------
 drivers/pci/dwc/pcie-designware.h    |  1 +
 2 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index d53d5f168363..7c621877a939 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -197,20 +197,14 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
 static int dw_pcie_ep_get_msi(struct pci_epc *epc)
 {
 	int val;
-	u32 lower_addr;
-	u32 upper_addr;
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	val = dw_pcie_readb_dbi(pci, MSI_MESSAGE_CONTROL);
-	val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
-
-	lower_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
-	upper_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
-
-	if (!(lower_addr || upper_addr))
+	val = dw_pcie_readw_dbi(pci, MSI_MESSAGE_CONTROL);
+	if (!(val & MSI_CAP_MSI_EN_MASK))
 		return -EINVAL;
 
+	val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
 	return val;
 }
 
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index e5d9d77b778e..cb493bcae8b4 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -101,6 +101,7 @@
 #define MSI_MESSAGE_CONTROL		0x52
 #define MSI_CAP_MMC_SHIFT		1
 #define MSI_CAP_MME_SHIFT		4
+#define MSI_CAP_MSI_EN_MASK		0x1
 #define MSI_CAP_MME_MASK		(7 << MSI_CAP_MME_SHIFT)
 #define MSI_MESSAGE_ADDR_L32		0x54
 #define MSI_MESSAGE_ADDR_U32		0x58
-- 
2.14.1

[PATCH AUTOSEL for 4.15 52/78] coresight: Fix disabling of CoreSight TPIU

[Sasha Levin]

From: Robert Walker <robert.walker@arm.com>

[ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ]

The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.

This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.

Signed-off-by: Robert Walker <robert.walker@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/hwtracing/coresight/coresight-tpiu.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c
index bef49a3a5ca7..4b46c494be5e 100644
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -46,8 +46,11 @@
 #define TPIU_ITATBCTR0		0xef8
 
 /** register definition **/
+/* FFSR - 0x300 */
+#define FFSR_FT_STOPPED		BIT(1)
 /* FFCR - 0x304 */
 #define FFCR_FON_MAN		BIT(6)
+#define FFCR_STOP_FI		BIT(12)
 
 /**
  * @base:	memory mapped base address for this component.
@@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata)
 {
 	CS_UNLOCK(drvdata->base);
 
-	/* Clear formatter controle reg. */
-	writel_relaxed(0x0, drvdata->base + TPIU_FFCR);
+	/* Clear formatter and stop on flush */
+	writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR);
 	/* Generate manual flush */
-	writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	/* Wait for flush to complete */
+	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+	/* Wait for formatter to stop */
+	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
 
 	CS_LOCK(drvdata->base);
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 55/78] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 83c75ddd816e979802bd244ad494139f28152921 ]

rcar_pcie_parse_request_of_pci_ranges() can fail and return an error
code, but this is not checked nor handled.

Fix this by adding the missing error handling.

Fixes: 5d2917d469faab72 ("PCI: rcar: Convert to DT resource parsing API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/host/pcie-rcar.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 52ab3cb0a0bf..95ca4a1feba4 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -1123,7 +1123,9 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&pcie->resources);
 
-	rcar_pcie_parse_request_of_pci_ranges(pcie);
+	err = rcar_pcie_parse_request_of_pci_ranges(pcie);
+	if (err)
+		goto err_free_bridge;
 
 	err = rcar_pcie_get_resources(pcie);
 	if (err < 0) {
@@ -1178,6 +1180,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 
 err_free_resource_list:
 	pci_free_resource_list(&pcie->resources);
+err_free_bridge:
 	pci_free_host_bridge(bridge);
 
 	return err;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 56/78] media: davinci: fix a debug printk

[Sasha Levin]

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[ Upstream commit 4f6c11044f512356cb63d3df0f3b38db79dc6736 ]

Two orthogonal changesets caused a breakage at a printk
inside davinci. Commit a2d17962c9ca
("[media] davinci: Switch from V4L2 OF to V4L2 fwnode")
made davinci to use struct fwnode_handle instead of
struct device_node. Commit 68d9c47b1679
("media: Convert to using %pOF instead of full_name")
changed the printk to not use ->full_name, but, instead,
to rely on %pOF.

With both patches applied, the Kernel will do the wrong
thing, as warned by smatch:
	drivers/media/platform/davinci/vpif_capture.c:1399 vpif_async_bound() error: '%pOF' expects argument of type 'struct device_node*', argument 5 has type 'void*'

So, change the logic to actually print the device name
that was obtained before the print logic.

Fixes: 68d9c47b1679 ("media: Convert to using %pOF instead of full_name")
Fixes: a2d17962c9ca ("[media] davinci: Switch from V4L2 OF to V4L2 fwnode")

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/platform/davinci/vpif_capture.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index fca4dc829f73..4efabfcd34b1 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -1397,9 +1397,9 @@ static int vpif_async_bound(struct v4l2_async_notifier *notifier,
 			vpif_obj.config->chan_config->inputs[i].subdev_name =
 				(char *)to_of_node(subdev->fwnode)->full_name;
 			vpif_dbg(2, debug,
-				 "%s: setting input %d subdev_name = %pOF\n",
+				 "%s: setting input %d subdev_name = %s\n",
 				 __func__, i,
-				 to_of_node(subdev->fwnode));
+				vpif_obj.config->chan_config->inputs[i].subdev_name);
 			return 0;
 		}
 	}
-- 
2.14.1

[PATCH AUTOSEL for 4.15 54/78] PCI: endpoint: Fix find_first_zero_bit() usage

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@axis.com>

[ Upstream commit 35ad61921f495ee14915d185de79478c1737b4da ]

find_first_zero_bit()'s parameter 'size' is defined in bits,
not in bytes.

Calling find_first_zero_bit() with the wrong size unit
will lead to insidious bugs.

Fix this by calling find_first_zero_bit() with size BITS_PER_LONG,
rather than sizeof() and add missing find_first_zero_bit() return
handling.

Fixes: d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pci/endpoint/pci-ep-cfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index 4f74386c1ced..5508cd32afcd 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -109,7 +109,10 @@ static int pci_epc_epf_link(struct config_item *epc_item,
 		goto err_add_epf;
 
 	func_no = find_first_zero_bit(&epc_group->function_num_map,
-				      sizeof(epc_group->function_num_map));
+				      BITS_PER_LONG);
+	if (func_no >= BITS_PER_LONG)
+		return -EINVAL;
+
 	set_bit(func_no, &epc_group->function_num_map);
 	epf->func_no = func_no;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 58/78] dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000

[Sasha Levin]

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

[ Upstream commit 81ee6f1ef9b1e93b2dc0a77211e9809ffbeb7ecb ]

The compatible string for this panel was specified as
toshiba,lt089ac29000.txt. I believe this is a mistake.

Fixes: 06e733e41f87 ("drm/panel: simple: add Toshiba LT089AC19000")
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 .../devicetree/bindings/display/panel/toshiba,lt089ac29000.txt          | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
index 4c0caaf246c9..89826116628c 100644
--- a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
+++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
@@ -1,7 +1,7 @@
 Toshiba 8.9" WXGA (1280x768) TFT LCD panel
 
 Required properties:
-- compatible: should be "toshiba,lt089ac29000.txt"
+- compatible: should be "toshiba,lt089ac29000"
 - power-supply: as specified in the base binding
 
 This binding is compatible with the simple-panel binding, which is specified
-- 
2.14.1

[PATCH AUTOSEL for 4.15 57/78] clk: check ops pointer on clock register

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 29fd2a34ef8d863e48183bd473ba57c8d7839e25 ]

Nothing really prevents a provider from (trying to) register a clock
without providing the clock ops structure.

We do check the individual fields before using them, but not the
structure pointer itself. This may have the usual nasty consequences when
the pointer is dereferenced, most likely when checking one the field
during the initialization.

This is fixed by returning an error on clock register if the ops pointer
is NULL.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20171219083329.24746-1-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index b56c11f51baf..12180049a42a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2684,7 +2684,13 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 		ret = -ENOMEM;
 		goto fail_name;
 	}
+
+	if (WARN_ON(!hw->init->ops)) {
+		ret = -EINVAL;
+		goto fail_ops;
+	}
 	core->ops = hw->init->ops;
+
 	if (dev && pm_runtime_enabled(dev))
 		core->dev = dev;
 	if (dev && dev->driver)
@@ -2746,6 +2752,7 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw)
 		kfree_const(core->parent_names[i]);
 	kfree(core->parent_names);
 fail_parent_names:
+fail_ops:
 	kfree_const(core->name);
 fail_name:
 	kfree(core);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 60/78] pinctrl: Really force states during suspend/resume

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a
"sleep" set of pins, and this particular platform suspends and resumes
in a way that the pin states are not preserved by the hardware, when we
resume, we would call pinctrl_single_resume() -> pinctrl_force_default()
-> pinctrl_select_state() and the first thing we do is check that the
pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from
pinctrl_select_state() and move it pinctrl_commit_state(), while keeping
the p->state == state check in pinctrl_select_state() not to change the
caller assumptions. pinctrl_force_sleep() and pinctrl_force_default()
are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij]
The forced pin control states are currently only used in some pin
controller drivers that grab their own reference to their own pins.
This is equal to the pin control hogs: pins taken by pin control
devices since there are no corresponding device in the Linux device
hierarchy, such as memory controller lines or unused GPIO lines,
or GPIO lines that are used orthogonally from the GPIO subsystem
but pincontrol-wise managed as hogs (non-strict mode, allowing
simultaneous use by GPIO and pin control). For this case forcing
the state from the drivers' suspend()/resume() callbacks makes
sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/core.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 4c8d5b23e4d0..2c0dbfcff3e6 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1189,19 +1189,16 @@ struct pinctrl_state *pinctrl_lookup_state(struct pinctrl *p,
 EXPORT_SYMBOL_GPL(pinctrl_lookup_state);
 
 /**
- * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * pinctrl_commit_state() - select/activate/program a pinctrl state to HW
  * @p: the pinctrl handle for the device that requests configuration
  * @state: the state handle to select/activate/program
  */
-int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state)
 {
 	struct pinctrl_setting *setting, *setting2;
 	struct pinctrl_state *old_state = p->state;
 	int ret;
 
-	if (p->state == state)
-		return 0;
-
 	if (p->state) {
 		/*
 		 * For each pinmux setting in the old state, forget SW's record
@@ -1265,6 +1262,19 @@ int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
 
 	return ret;
 }
+
+/**
+ * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * @p: the pinctrl handle for the device that requests configuration
+ * @state: the state handle to select/activate/program
+ */
+int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+{
+	if (p->state == state)
+		return 0;
+
+	return pinctrl_commit_state(p, state);
+}
 EXPORT_SYMBOL_GPL(pinctrl_select_state);
 
 static void devm_pinctrl_release(struct device *dev, void *res)
@@ -1430,7 +1440,7 @@ void pinctrl_unregister_map(const struct pinctrl_map *map)
 int pinctrl_force_sleep(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_sleep);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_sleep);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
@@ -1442,7 +1452,7 @@ EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
 int pinctrl_force_default(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_default);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_default);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_default);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 59/78] clk: use round rate to bail out early in set_rate

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit ca5e089a32c5ffba6c5101fdabdd6dea18041c34 ]

The current implementation of clk_core_set_rate_nolock() bails out early
if the requested rate is exactly the same as the one set. It should bail
out if the request would not result in a rate a change. This is important
when the rate is not exactly what is requested, which is fairly common
with PLLs.

Ex: provider able to give any rate with steps of 100Hz
 - 1st consumer request 48000Hz and gets it.
 - 2nd consumer request 48010Hz as well. If we were to perform the usual
   mechanism, we would get 48000Hz as well. The clock would not change so
   there is no point performing any checks to make sure the clock can
   change, we know it won't.

This is important to prepare the addition of the clock protection
mechanism

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20171201215200.23523-6-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 12180049a42a..0cca063f70e7 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1642,16 +1642,37 @@ static void clk_change_rate(struct clk_core *core)
 	clk_pm_runtime_put(core);
 }
 
+static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core,
+						     unsigned long req_rate)
+{
+	int ret;
+	struct clk_rate_request req;
+
+	lockdep_assert_held(&prepare_lock);
+
+	if (!core)
+		return 0;
+
+	clk_core_get_boundaries(core, &req.min_rate, &req.max_rate);
+	req.rate = req_rate;
+
+	ret = clk_core_round_rate_nolock(core, &req);
+
+	return ret ? 0 : req.rate;
+}
+
 static int clk_core_set_rate_nolock(struct clk_core *core,
 				    unsigned long req_rate)
 {
 	struct clk_core *top, *fail_clk;
-	unsigned long rate = req_rate;
+	unsigned long rate;
 	int ret = 0;
 
 	if (!core)
 		return 0;
 
+	rate = clk_core_req_round_rate_nolock(core, req_rate);
+
 	/* bail early if nothing to do */
 	if (rate == clk_core_get_rate_nolock(core))
 		return 0;
@@ -1660,7 +1681,7 @@ static int clk_core_set_rate_nolock(struct clk_core *core,
 		return -EBUSY;
 
 	/* calculate new rates and get the topmost changed clock */
-	top = clk_calc_new_rates(core, rate);
+	top = clk_calc_new_rates(core, req_rate);
 	if (!top)
 		return -EINVAL;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 62/78] iommu/vt-d: clean up pr_irq if request_threaded_irq fails

[Sasha Levin]

From: Jerry Snitselaar <jsnitsel@redhat.com>

[ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ]

It is unlikely request_threaded_irq will fail, but if it does for some
reason we should clear iommu->pr_irq in the error path. Also
intel_svm_finish_prq shouldn't try to clean up the page request
interrupt if pr_irq is 0. Without these, if request_threaded_irq were
to fail the following occurs:

fail with no fixes:

[    0.683147] ------------[ cut here ]------------
[    0.683148] NULL pointer, cannot free irq
[    0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140
[    0.683160] Modules linked in:
[    0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3
[    0.683165] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140
[    0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292
[    0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8
[    0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246
[    0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c
[    0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a
[    0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000
[    0.683178] FS:  0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000
[    0.683180] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.683182] Call Trace:
[    0.683189]  intel_svm_finish_prq+0x3c/0x60
[    0.683191]  free_dmar_iommu+0x1ac/0x1b0
[    0.683195]  init_dmars+0xaaa/0xaea
[    0.683200]  ? klist_next+0x19/0xc0
[    0.683203]  ? pci_do_find_bus+0x50/0x50
[    0.683205]  ? pci_get_dev_by_id+0x52/0x70
[    0.683208]  intel_iommu_init+0x498/0x5c7
[    0.683211]  pci_iommu_init+0x13/0x3c
[    0.683214]  ? e820__memblock_setup+0x61/0x61
[    0.683217]  do_one_initcall+0x4d/0x1a0
[    0.683220]  kernel_init_freeable+0x186/0x20e
[    0.683222]  ? set_debug_rodata+0x11/0x11
[    0.683225]  ? rest_init+0xb0/0xb0
[    0.683226]  kernel_init+0xa/0xff
[    0.683229]  ret_from_fork+0x1f/0x30
[    0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5
e c3 0f 1f 44 00 00 66 2e 0f 1f 84
[    0.683285] ---[ end trace f7650e42792627ca ]---

with iommu->pr_irq = 0, but no check in intel_svm_finish_prq:

[    0.669561] ------------[ cut here ]------------
[    0.669563] Trying to free already-free IRQ 0
[    0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0
[    0.669574] Modules linked in:
[    0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4
[    0.669579] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.669581] RIP: 0010:__free_irq+0xa4/0x2c0
[    0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082
[    0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8
[    0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046
[    0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c
[    0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960
[    0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600
[    0.669593] FS:  0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000
[    0.669594] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.669602] Call Trace:
[    0.669616]  free_irq+0x30/0x60
[    0.669620]  intel_svm_finish_prq+0x34/0x60
[    0.669623]  free_dmar_iommu+0x1ac/0x1b0
[    0.669627]  init_dmars+0xaaa/0xaea
[    0.669631]  ? klist_next+0x19/0xc0
[    0.669634]  ? pci_do_find_bus+0x50/0x50
[    0.669637]  ? pci_get_dev_by_id+0x52/0x70
[    0.669639]  intel_iommu_init+0x498/0x5c7
[    0.669642]  pci_iommu_init+0x13/0x3c
[    0.669645]  ? e820__memblock_setup+0x61/0x61
[    0.669648]  do_one_initcall+0x4d/0x1a0
[    0.669651]  kernel_init_freeable+0x186/0x20e
[    0.669653]  ? set_debug_rodata+0x11/0x11
[    0.669656]  ? rest_init+0xb0/0xb0
[    0.669658]  kernel_init+0xa/0xff
[    0.669661]  ret_from_fork+0x1f/0x30
[    0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e
8 0e 4c 68 00 49 8b 46 40 48 8b 80
[    0.669688] ---[ end trace 58a470248700f2fc ]---

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/intel-svm.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel-svm.c b/drivers/iommu/intel-svm.c
index ed1cf7c5a43b..6643277e321e 100644
--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -129,6 +129,7 @@ int intel_svm_enable_prq(struct intel_iommu *iommu)
 		pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n",
 		       iommu->name);
 		dmar_free_hwirq(irq);
+		iommu->pr_irq = 0;
 		goto err;
 	}
 	dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL);
@@ -144,9 +145,11 @@ int intel_svm_finish_prq(struct intel_iommu *iommu)
 	dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL);
 	dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL);
 
-	free_irq(iommu->pr_irq, iommu);
-	dmar_free_hwirq(iommu->pr_irq);
-	iommu->pr_irq = 0;
+	if (iommu->pr_irq) {
+		free_irq(iommu->pr_irq, iommu);
+		dmar_free_hwirq(iommu->pr_irq);
+		iommu->pr_irq = 0;
+	}
 
 	free_pages((unsigned long)iommu->prq, PRQ_ORDER);
 	iommu->prq = NULL;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 61/78] pinctrl: rockchip: enable clock when reading pin direction register

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 5c9d8c4f6b8168738a26bcf288516cc3a0886810 ]

We generally leave the GPIO clock disabled, unless an interrupt is
requested or we're accessing IO registers. We forgot to do this for the
->get_direction() callback, which means we can sometimes [1] get
incorrect results [2] from, e.g., /sys/kernel/debug/gpio.

Enable the clock, so we get the right results!

[1] Sometimes, because many systems have 1 or mor interrupt requested on
each GPIO bank, so they always leave their clock on.

[2] Incorrect, meaning the register returns 0, and so we interpret that
as "input".

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/pinctrl/pinctrl-rockchip.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 2ba17548ad5b..073de6a9ed34 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -2014,8 +2014,16 @@ static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 {
 	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
 	u32 data;
+	int ret;
 
+	ret = clk_enable(bank->clk);
+	if (ret < 0) {
+		dev_err(bank->drvdata->dev,
+			"failed to enable clock for bank %s\n", bank->name);
+		return ret;
+	}
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+	clk_disable(bank->clk);
 
 	return !(data & BIT(offset));
 }
-- 
2.14.1

[PATCH AUTOSEL for 4.15 63/78] ip6_vti: adjust vti mtu according to mtu of lower device

[Sasha Levin]

From: Alexey Kodanev <alexey.kodanev@oracle.com>

[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ]

LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().

In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.

The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().

Here is the example when the lower device MTU is set to 9000:

  # ip a sh ltp_ns_veth2
      ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
        inet 10.0.0.2/24 scope global ltp_ns_veth2
        inet6 fd00::2/64 scope global

  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
        link/tunnel6 fd00::2 peer fd00::1

After the patch:
  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
        link/tunnel6 fd00::2 peer fd00::1

Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv6/ip6_vti.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 8c184f84f353..fa3ae1cb50d3 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -626,6 +626,7 @@ static void vti6_link_config(struct ip6_tnl *t)
 {
 	struct net_device *dev = t->dev;
 	struct __ip6_tnl_parm *p = &t->parms;
+	struct net_device *tdev = NULL;
 
 	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
 	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -638,6 +639,25 @@ static void vti6_link_config(struct ip6_tnl *t)
 		dev->flags |= IFF_POINTOPOINT;
 	else
 		dev->flags &= ~IFF_POINTOPOINT;
+
+	if (p->flags & IP6_TNL_F_CAP_XMIT) {
+		int strict = (ipv6_addr_type(&p->raddr) &
+			      (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
+		struct rt6_info *rt = rt6_lookup(t->net,
+						 &p->raddr, &p->laddr,
+						 p->link, strict);
+
+		if (rt)
+			tdev = rt->dst.dev;
+		ip6_rt_put(rt);
+	}
+
+	if (!tdev && p->link)
+		tdev = __dev_get_by_index(t->net, p->link);
+
+	if (tdev)
+		dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len,
+				 IPV6_MIN_MTU);
 }
 
 /**
-- 
2.14.1

[PATCH AUTOSEL for 4.15 64/78] ip_gre: fix error path when erspan_rcv failed

[Sasha Levin]

From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>

[ Upstream commit dd8d5b8c5b22e31079b259b8bfb686f1fac1080a ]

When erspan_rcv call return PACKET_REJECT, we shoudn't call ipgre_rcv to
process packets again, instead send icmp unreachable message in error
path.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Acked-by: William Tu <u9012063@gmail.com>
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv4/ip_gre.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 45ffd3d045d2..e05bca0e61fc 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -408,11 +408,13 @@ static int gre_rcv(struct sk_buff *skb)
 	if (unlikely(tpi.proto == htons(ETH_P_ERSPAN))) {
 		if (erspan_rcv(skb, &tpi, hdr_len) == PACKET_RCVD)
 			return 0;
+		goto out;
 	}
 
 	if (ipgre_rcv(skb, &tpi, hdr_len) == PACKET_RCVD)
 		return 0;
 
+out:
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
 drop:
 	kfree_skb(skb);
-- 
2.14.1

[PATCH AUTOSEL for 4.15 65/78] ip_gre: fix potential memory leak in erspan_rcv

[Sasha Levin]

From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>

[ Upstream commit 50670b6ee9bc4ae8f9ce3112b437987adf273245 ]

If md is NULL, tun_dst must be freed, otherwise it will cause memory
leak.

Fixes: 1a66a836da6 ("gre: add collect_md mode to ERSPAN tunnel")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/ipv4/ip_gre.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index e05bca0e61fc..01bbbfe2c2a7 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -303,8 +303,10 @@ static int erspan_rcv(struct sk_buff *skb, struct tnl_ptk_info *tpi,
 				return PACKET_REJECT;
 
 			md = ip_tunnel_info_opts(&tun_dst->u.tun_info);
-			if (!md)
+			if (!md) {
+				dst_release((struct dst_entry *)tun_dst);
 				return PACKET_REJECT;
+			}
 
 			md->index = index;
 			info = &tun_dst->u.tun_info;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 66/78] soc: qcom: smsm: fix child-node lookup

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 8804517e9fc16c10081ff5e42e7d80704973a8e2 ]

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.

Note that the original premature free of the parent node has already
been fixed separately.

Also note that this pattern of looking up the first child node with a
given property is rare enough that a generic helper is probably not
warranted.

Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Fixes: 3e8b55411468 ("soc: qcom: smsm: fix of_node refcnting problem")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/soc/qcom/smsm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 403bea9d546b..50214b620865 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -496,8 +496,10 @@ static int qcom_smsm_probe(struct platform_device *pdev)
 	if (!smsm->hosts)
 		return -ENOMEM;
 
-	local_node = of_find_node_with_property(of_node_get(pdev->dev.of_node),
-						"#qcom,smem-state-cells");
+	for_each_child_of_node(pdev->dev.of_node, local_node) {
+		if (of_find_property(local_node, "#qcom,smem-state-cells", NULL))
+			break;
+	}
 	if (!local_node) {
 		dev_err(&pdev->dev, "no state entry\n");
 		return -EINVAL;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 67/78] scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 9de416ac67b54d666327ba927a190f4b7259f4a0 ]

When enabled for both SCSI and NVME support, and connected pt2pt to a
SCSI only target, the driver nodelist entry for the remote port is left
in PRLI_ISSUE state and no SCSI LUNs are discovered. Works fine if only
configured for SCSI support.

Error was due to some of the prli points still reflecting the need to
send only 1 PRLI. On a lot of fabric configs, targets were NVME only,
which meant the fabric-reported protocol attributes were only telling
the driver one protocol or the other. Thus things worked fine. With
pt2pt, the driver must send a PRLI for both protocols as there are no
hints on what the target supports. Thus pt2pt targets were hitting the
multiple PRLI issues.

Complete the dual PRLI support. Track explicitly whether scsi (fcp) or
nvme prli's have been sent. Accurately track protocol support detected
on each node as reported by the fabric or probed by PRLI traffic.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/lpfc/lpfc_ct.c        |  1 +
 drivers/scsi/lpfc/lpfc_els.c       | 30 ++++++++++++++++++++----------
 drivers/scsi/lpfc/lpfc_nportdisc.c | 30 +++++++++++++-----------------
 3 files changed, 34 insertions(+), 27 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index f77673ab4a84..3a8ec82e685a 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -471,6 +471,7 @@ lpfc_prep_node_fc4type(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
 				"Parse GID_FTrsp: did:x%x flg:x%x x%x",
 				Did, ndlp->nlp_flag, vport->fc_flag);
 
+			ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
 			/* By default, the driver expects to support FCP FC4 */
 			if (fc4_type == FC_TYPE_FCP)
 				ndlp->nlp_fc4_type |= NLP_FC4_FCP;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 39d5b146202e..537ee0c44198 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2088,6 +2088,10 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag &= ~NLP_PRLI_SND;
+
+	/* Driver supports multiple FC4 types.  Counters matter. */
+	vport->fc_prli_sent--;
+	ndlp->fc4_prli_sent--;
 	spin_unlock_irq(shost->host_lock);
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
@@ -2095,9 +2099,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		irsp->ulpStatus, irsp->un.ulpWord[4],
 		ndlp->nlp_DID);
 
-	/* Ddriver supports multiple FC4 types.  Counters matter. */
-	vport->fc_prli_sent--;
-
 	/* PRLI completes to NPort <nlp_DID> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0103 PRLI completes to NPort x%06x "
@@ -2111,7 +2112,6 @@ lpfc_cmpl_els_prli(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	if (irsp->ulpStatus) {
 		/* Check for retry */
-		ndlp->fc4_prli_sent--;
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb)) {
 			/* ELS command is being retried */
 			goto out;
@@ -2190,6 +2190,15 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		ndlp->nlp_fc4_type |= NLP_FC4_NVME;
 	local_nlp_type = ndlp->nlp_fc4_type;
 
+	/* This routine will issue 1 or 2 PRLIs, so zero all the ndlp
+	 * fields here before any of them can complete.
+	 */
+	ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
+	ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
+	ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+	ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+	ndlp->nvme_fb_size = 0;
+
  send_next_prli:
 	if (local_nlp_type & NLP_FC4_FCP) {
 		/* Payload is 4 + 16 = 20 x14 bytes. */
@@ -2298,6 +2307,13 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	elsiocb->iocb_cmpl = lpfc_cmpl_els_prli;
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag |= NLP_PRLI_SND;
+
+	/* The vport counters are used for lpfc_scan_finished, but
+	 * the ndlp is used to track outstanding PRLIs for different
+	 * FC4 types.
+	 */
+	vport->fc_prli_sent++;
+	ndlp->fc4_prli_sent++;
 	spin_unlock_irq(shost->host_lock);
 	if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
 	    IOCB_ERROR) {
@@ -2308,12 +2324,6 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		return 1;
 	}
 
-	/* The vport counters are used for lpfc_scan_finished, but
-	 * the ndlp is used to track outstanding PRLIs for different
-	 * FC4 types.
-	 */
-	vport->fc_prli_sent++;
-	ndlp->fc4_prli_sent++;
 
 	/* The driver supports 2 FC4 types.  Make sure
 	 * a PRLI is issued for all types before exiting.
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index b6957d944b9a..678bfdd53eb2 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -390,6 +390,11 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		break;
 	}
 
+	ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
+	ndlp->nlp_type &= ~(NLP_NVME_TARGET | NLP_NVME_INITIATOR);
+	ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
+	ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+
 	/* Check for Nport to NPort pt2pt protocol */
 	if ((vport->fc_flag & FC_PT2PT) &&
 	    !(vport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -742,9 +747,6 @@ lpfc_rcv_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	lp = (uint32_t *) pcmd->virt;
 	npr = (PRLI *) ((uint8_t *) lp + sizeof (uint32_t));
 
-	ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
-	ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
-	ndlp->nlp_flag &= ~NLP_FIRSTBURST;
 	if ((npr->prliType == PRLI_FCP_TYPE) ||
 	    (npr->prliType == PRLI_NVME_TYPE)) {
 		if (npr->initiatorFunc) {
@@ -769,8 +771,12 @@ lpfc_rcv_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		 * type.  Target mode does not issue gft_id so doesn't get
 		 * the fc4 type set until now.
 		 */
-		if ((phba->nvmet_support) && (npr->prliType == PRLI_NVME_TYPE))
+		if (phba->nvmet_support && (npr->prliType == PRLI_NVME_TYPE)) {
 			ndlp->nlp_fc4_type |= NLP_FC4_NVME;
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+		}
+		if (npr->prliType == PRLI_FCP_TYPE)
+			ndlp->nlp_fc4_type |= NLP_FC4_FCP;
 	}
 	if (rport) {
 		/* We need to update the rport role values */
@@ -1552,7 +1558,6 @@ lpfc_rcv_prli_reglogin_issue(struct lpfc_vport *vport,
 		if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
 			lpfc_rcv_prli(vport, ndlp, cmdiocb);
 			lpfc_els_rsp_prli_acc(vport, cmdiocb, ndlp);
-			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 		} else {
 			/* RPI registration has not completed. Reject the PRLI
 			 * to prevent an illegal state transition when the
@@ -1568,6 +1573,7 @@ lpfc_rcv_prli_reglogin_issue(struct lpfc_vport *vport,
 			stat.un.b.lsRjtRsnCodeExp = LSEXP_CMD_IN_PROGRESS;
 			lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
 					    ndlp, NULL);
+			return ndlp->nlp_state;
 		}
 	} else {
 		/* Initiator mode. */
@@ -1922,13 +1928,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		return ndlp->nlp_state;
 	}
 
-	/* Check out PRLI rsp */
-	ndlp->nlp_type &= ~(NLP_FCP_TARGET | NLP_FCP_INITIATOR);
-	ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
-
-	/* NVME or FCP first burst must be negotiated for each PRLI. */
-	ndlp->nlp_flag &= ~NLP_FIRSTBURST;
-	ndlp->nvme_fb_size = 0;
 	if (npr && (npr->acceptRspCode == PRLI_REQ_EXECUTED) &&
 	    (npr->prliType == PRLI_FCP_TYPE)) {
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
@@ -1945,8 +1944,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		if (npr->Retry)
 			ndlp->nlp_fcp_info |= NLP_FCP_2_DEVICE;
 
-		/* PRLI completed.  Decrement count. */
-		ndlp->fc4_prli_sent--;
 	} else if (nvpr &&
 		   (bf_get_be32(prli_acc_rsp_code, nvpr) ==
 		    PRLI_REQ_EXECUTED) &&
@@ -1991,8 +1988,6 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 				 be32_to_cpu(nvpr->word5),
 				 ndlp->nlp_flag, ndlp->nlp_fcp_info,
 				 ndlp->nlp_type);
-		/* PRLI completed.  Decrement count. */
-		ndlp->fc4_prli_sent--;
 	}
 	if (!(ndlp->nlp_type & NLP_FCP_TARGET) &&
 	    (vport->port_type == LPFC_NPIV_PORT) &&
@@ -2016,7 +2011,8 @@ lpfc_cmpl_prli_prli_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		ndlp->nlp_prev_state = NLP_STE_PRLI_ISSUE;
 		if (ndlp->nlp_type & (NLP_FCP_TARGET | NLP_NVME_TARGET))
 			lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
-		else
+		else if (ndlp->nlp_type &
+			 (NLP_FCP_INITIATOR | NLP_NVME_INITIATOR))
 			lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 	} else
 		lpfc_printf_vlog(vport,
-- 
2.14.1

[PATCH AUTOSEL for 4.15 68/78] scsi: lpfc: Fix issues connecting with nvme initiator

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit e06351a002214d152142906a546006e3446d1ef7 ]

In the lpfc discovery engine, when as a nvme target, where the driver
was performing mailbox io with the adapter for port login when a NVME
PRLI is received from the host. Rather than queue and eventually get
back to sending a response after the mailbox traffic, the driver
rejected the io with an error response.

Turns out this particular initiator didn't like the rejection values
(unable to process command/command in progress) so it never attempted a
retry of the PRLI. Thus the host never established nvme connectivity
with the lpfc target.

By changing the rejection values (to Logical Busy/nothing more), the
initiator accepted the response and would retry the PRLI, resulting in
nvme connectivity.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 678bfdd53eb2..d489f6827cc1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1569,8 +1569,8 @@ lpfc_rcv_prli_reglogin_issue(struct lpfc_vport *vport,
 					 ndlp->nlp_rpi, ndlp->nlp_state,
 					 ndlp->nlp_flag);
 			memset(&stat, 0, sizeof(struct ls_rjt));
-			stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
-			stat.un.b.lsRjtRsnCodeExp = LSEXP_CMD_IN_PROGRESS;
+			stat.un.b.lsRjtRsnCode = LSRJT_LOGICAL_BSY;
+			stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
 			lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb,
 					    ndlp, NULL);
 			return ndlp->nlp_state;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 70/78] ARM: dts: aspeed-evb: Add unit name to memory node

[Sasha Levin]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit e40ed274489a5f516da120186578eb379b452ac6 ]

Fixes a warning when building with W=1.

All of the ASPEED device trees build without warnings now.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 602bc10fdaf4..7472ed355d4b 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
-- 
2.14.1

[PATCH AUTOSEL for 4.15 71/78] nfsd4: permit layoutget of executable-only files

[Sasha Levin]

From: Benjamin Coddington <bcodding@redhat.com>

[ Upstream commit 66282ec1cf004c09083c29cb5e49019037937bbd ]

Clients must be able to read a file in order to execute it, and for pNFS
that means the client needs to be able to perform a LAYOUTGET on the file.

This behavior for executable-only files was added for OPEN in commit
a043226bc140 "nfsd4: permit read opens of executable-only files".

This fixes up xfstests generic/126 on block/scsi layouts.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/nfsd/nfs4proc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 008ea0b627d0..effeeb4f556f 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1363,14 +1363,14 @@ nfsd4_layoutget(struct svc_rqst *rqstp,
 	const struct nfsd4_layout_ops *ops;
 	struct nfs4_layout_stateid *ls;
 	__be32 nfserr;
-	int accmode;
+	int accmode = NFSD_MAY_READ_IF_EXEC;
 
 	switch (lgp->lg_seg.iomode) {
 	case IOMODE_READ:
-		accmode = NFSD_MAY_READ;
+		accmode |= NFSD_MAY_READ;
 		break;
 	case IOMODE_RW:
-		accmode = NFSD_MAY_READ | NFSD_MAY_WRITE;
+		accmode |= NFSD_MAY_READ | NFSD_MAY_WRITE;
 		break;
 	default:
 		dprintk("%s: invalid iomode %d\n",
-- 
2.14.1

[PATCH AUTOSEL for 4.15 69/78] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 744820869166c8c78be891240cf5f66e8a333694 ]

Debugfs file reset_stats is created with S_IRUSR permissions,
but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS,
whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS.

The patch fixes misstype with permissions.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/hw/ocrdma/ocrdma_stats.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
index e528d7acb7f6..fb78b16ce671 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
@@ -834,7 +834,7 @@ void ocrdma_add_port_stats(struct ocrdma_dev *dev)
 
 	dev->reset_stats.type = OCRDMA_RESET_STATS;
 	dev->reset_stats.dev = dev;
-	if (!debugfs_create_file("reset_stats", S_IRUSR, dev->dir,
+	if (!debugfs_create_file("reset_stats", 0200, dev->dir,
 				&dev->reset_stats, &ocrdma_dbg_ops))
 		goto err;
 
-- 
2.14.1

[PATCH AUTOSEL for 4.15 72/78] clk: at91: pmc: Wait for clocks when resuming

[Sasha Levin]

From: Romain Izard <romain.izard.pro@gmail.com>

[ Upstream commit 960e1c4d93be86d3b118fe22d4edc69e401b28b5 ]

Wait for the syncronization of all clocks when resuming, not only the
UPLL clock. Do not use regmap_read_poll_timeout, as it will call BUG()
when interrupts are masked, which is the case in here.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/at91/pmc.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 775af473fe11..5c2b26de303e 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -107,10 +107,20 @@ static int pmc_suspend(void)
 	return 0;
 }
 
+static bool pmc_ready(unsigned int mask)
+{
+	unsigned int status;
+
+	regmap_read(pmcreg, AT91_PMC_SR, &status);
+
+	return ((status & mask) == mask) ? 1 : 0;
+}
+
 static void pmc_resume(void)
 {
-	int i, ret = 0;
+	int i;
 	u32 tmp;
+	u32 mask = AT91_PMC_MCKRDY | AT91_PMC_LOCKA;
 
 	regmap_read(pmcreg, AT91_PMC_MCKR, &tmp);
 	if (pmc_cache.mckr != tmp)
@@ -134,13 +144,11 @@ static void pmc_resume(void)
 			     AT91_PMC_PCR_CMD);
 	}
 
-	if (pmc_cache.uckr & AT91_PMC_UPLLEN) {
-		ret = regmap_read_poll_timeout(pmcreg, AT91_PMC_SR, tmp,
-					       !(tmp & AT91_PMC_LOCKU),
-					       10, 5000);
-		if (ret)
-			pr_crit("USB PLL didn't lock when resuming\n");
-	}
+	if (pmc_cache.uckr & AT91_PMC_UPLLEN)
+		mask |= AT91_PMC_LOCKU;
+
+	while (!pmc_ready(mask))
+		cpu_relax();
 }
 
 static struct syscore_ops pmc_syscore_ops = {
-- 
2.14.1

[PATCH AUTOSEL for 4.15 73/78] clk: Don't touch hardware when reparenting during registration

[Sasha Levin]

From: Stephen Boyd <sboyd@codeaurora.org>

[ Upstream commit f8f8f1d04494d3a6546bee3f0618c4dba31d7b72 ]

The orphan clocks reparent operation shouldn't touch the hardware
if clocks are enabled, otherwise it may get a chance to disable a
newly registered critical clock which triggers the warning below.

Assuming we have two clocks: A and B, B is the parent of A.
Clock A has flag: CLK_OPS_PARENT_ENABLE
Clock B has flag: CLK_IS_CRITICAL

Step 1:
Clock A is registered, then it becomes orphan.

Step 2:
Clock B is registered. Before clock B reach the critical clock enable
operation, orphan A will find the newly registered parent B and do
reparent operation, then parent B will be finally disabled in
__clk_set_parent_after() due to CLK_OPS_PARENT_ENABLE flag as there's
still no users of B which will then trigger the following warning.

WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:597 clk_core_disable+0xb4/0xe0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00056-gdff1f66-dirty #1373
Hardware name: Generic DT based system
Backtrace:
[<c010c4bc>] (dump_backtrace) from [<c010c764>] (show_stack+0x18/0x1c)
 r6:600000d3 r5:00000000 r4:c0e26358 r3:00000000
[<c010c74c>] (show_stack) from [<c040599c>] (dump_stack+0xb4/0xe8)
[<c04058e8>] (dump_stack) from [<c0125c94>] (__warn+0xd8/0x104)
 r10:c0c21cd0 r9:c048aa78 r8:00000255 r7:00000009 r6:c0c1cd90 r5:00000000
 r4:00000000 r3:c0e01d34
[<c0125bbc>] (__warn) from [<c0125d74>] (warn_slowpath_null+0x28/0x30)
 r9:00000000 r8:ef00bf80 r7:c165ac4c r6:ef00bf80 r5:ef00bf80 r4:ef00bf80
[<c0125d4c>] (warn_slowpath_null) from [<c048aa78>] (clk_core_disable+0xb4/0xe0)
[<c048a9c4>] (clk_core_disable) from [<c048be88>] (clk_core_disable_lock+0x20/0x2c)
 r4:000000d3 r3:c0e0af00
[<c048be68>] (clk_core_disable_lock) from [<c048c224>] (clk_core_disable_unprepare+0x14/0x28)
 r5:00000000 r4:ef00bf80
[<c048c210>] (clk_core_disable_unprepare) from [<c048c270>] (__clk_set_parent_after+0x38/0x54)
 r4:ef00bd80 r3:000010a0
[<c048c238>] (__clk_set_parent_after) from [<c048daa8>] (clk_register+0x4d0/0x648)
 r6:ef00d500 r5:ef00bf80 r4:ef00bd80 r3:ef00bfd4
[<c048d5d8>] (clk_register) from [<c048dc30>] (clk_hw_register+0x10/0x1c)
 r9:00000000 r8:00000003 r7:00000000 r6:00000824 r5:00000001 r4:ef00d500
[<c048dc20>] (clk_hw_register) from [<c048e698>] (_register_divider+0xcc/0x120)
[<c048e5cc>] (_register_divider) from [<c048e730>] (clk_register_divider+0x44/0x54)
 r10:00000004 r9:00000003 r8:00000001 r7:00000000 r6:00000003 r5:00000001
 r4:f0810030
[<c048e6ec>] (clk_register_divider) from [<c0d3ff58>] (imx7ulp_clocks_init+0x558/0xe98)
 r7:c0e296f8 r6:c165c808 r5:00000000 r4:c165c808
[<c0d3fa00>] (imx7ulp_clocks_init) from [<c0d24db0>] (of_clk_init+0x118/0x1e0)
 r10:00000001 r9:c0e01f68 r8:00000000 r7:c0e01f60 r6:ef7f8974 r5:ef0035c0
 r4:00000006
[<c0d24c98>] (of_clk_init) from [<c0d04a50>] (time_init+0x2c/0x38)
 r10:efffed40 r9:c0d61a48 r8:c0e78000 r7:c0e07900 r6:ffffffff r5:c0e78000
 r4:00000000
[<c0d04a24>] (time_init) from [<c0d00b8c>] (start_kernel+0x218/0x394)
[<c0d00974>] (start_kernel) from [<6000807c>] (0x6000807c)
 r10:00000000 r9:410fc075 r8:6000406a r7:c0e0c930 r6:c0d61a44 r5:c0e07918
 r4:c0e78294

We know that the clk isn't enabled with any sort of prepare_count
here so we don't need to enable anything to prevent a race. And
we're holding the prepare mutex so set_rate/set_parent can't race
here either. Based on an earlier patch by Dong Aisheng.

Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 0cca063f70e7..6c18fa7bcc23 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2597,14 +2597,17 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
 		struct clk_core *parent = __clk_init_parent(orphan);
+		unsigned long flags;
 
 		/*
 		 * we could call __clk_set_parent, but that would result in a
 		 * redundant call to the .set_rate op, if it exists
 		 */
 		if (parent) {
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
+			/* update the clk tree topology */
+			flags = clk_enable_lock();
+			clk_reparent(orphan, parent);
+			clk_enable_unlock(flags);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
 		}
-- 
2.14.1

[PATCH AUTOSEL for 4.15 75/78] clk: si5351: Rename internal plls to avoid name collisions

[Sasha Levin]

From: Sergej Sawazki <sergej@taudac.com>

[ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ]

This drivers probe fails due to a clock name collision if a clock named
'plla' or 'pllb' is already registered when registering this drivers
internal plls.

Fix it by renaming internal plls to avoid name collisions.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk-si5351.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index 20d90769cced..653b0f38d475 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -72,7 +72,7 @@ static const char * const si5351_input_names[] = {
 	"xtal", "clkin"
 };
 static const char * const si5351_pll_names[] = {
-	"plla", "pllb", "vxco"
+	"si5351_plla", "si5351_pllb", "si5351_vxco"
 };
 static const char * const si5351_msynth_names[] = {
 	"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
-- 
2.14.1

[PATCH AUTOSEL for 4.15 74/78] clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()

[Sasha Levin]

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 063578dc5f407f67d149133818efabe457daafda ]

If the nocount bit is set the divider is bypassed and the settings for the
divider count should be ignored and a divider value of 1 should be assumed.
Handle this correctly in the driver recalc_rate() callback.

While the driver sets up the part so that the read back dividers values
yield the correct result the power-on reset settings of the part might not
reflect this and hence calling e.g. clk_get_rate() without prior calls to
clk_set_rate() will yield the wrong result.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk-axi-clkgen.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c
index 5e918e7afaba..95a6e9834392 100644
--- a/drivers/clk/clk-axi-clkgen.c
+++ b/drivers/clk/clk-axi-clkgen.c
@@ -40,6 +40,10 @@
 #define MMCM_REG_FILTER1	0x4e
 #define MMCM_REG_FILTER2	0x4f
 
+#define MMCM_CLKOUT_NOCOUNT	BIT(6)
+
+#define MMCM_CLK_DIV_NOCOUNT	BIT(12)
+
 struct axi_clkgen {
 	void __iomem *base;
 	struct clk_hw clk_hw;
@@ -315,12 +319,27 @@ static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
 	unsigned int reg;
 	unsigned long long tmp;
 
-	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, &reg);
-	dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_2, &reg);
+	if (reg & MMCM_CLKOUT_NOCOUNT) {
+		dout = 1;
+	} else {
+		axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, &reg);
+		dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	}
+
 	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_DIV, &reg);
-	d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
-	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, &reg);
-	m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	if (reg & MMCM_CLK_DIV_NOCOUNT)
+		d = 1;
+	else
+		d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB2, &reg);
+	if (reg & MMCM_CLKOUT_NOCOUNT) {
+		m = 1;
+	} else {
+		axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, &reg);
+		m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	}
 
 	if (d == 0 || dout == 0)
 		return 0;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 76/78] crypto: artpec6 - set correct iv size for gcm(aes)

[Sasha Levin]

From: Lars Persson <lars.persson@axis.com>

[ Upstream commit 6d6e71feb183aa588c849e20e7baa47cb162928a ]

The IV size should not include the 32 bit counter. Because we had the
IV size set as 16 the transform only worked when the IV input was zero
padded.

Fixes: a21eb94fc4d3 ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver")
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/crypto/axis/artpec6_crypto.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/axis/artpec6_crypto.c b/drivers/crypto/axis/artpec6_crypto.c
index 456278440863..22df6b55e172 100644
--- a/drivers/crypto/axis/artpec6_crypto.c
+++ b/drivers/crypto/axis/artpec6_crypto.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 
 #include <crypto/aes.h>
+#include <crypto/gcm.h>
 #include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/skcipher.h>
@@ -1934,7 +1935,7 @@ static int artpec6_crypto_prepare_aead(struct aead_request *areq)
 
 	memcpy(req_ctx->hw_ctx.J0, areq->iv, crypto_aead_ivsize(cipher));
 	// The HW omits the initial increment of the counter field.
-	crypto_inc(req_ctx->hw_ctx.J0+12, 4);
+	memcpy(req_ctx->hw_ctx.J0 + GCM_AES_IV_SIZE, "\x00\x00\x00\x01", 4);
 
 	ret = artpec6_crypto_setup_out_descr(common, &req_ctx->hw_ctx,
 		sizeof(struct artpec6_crypto_aead_hw_ctx), false, false);
@@ -2956,7 +2957,7 @@ static struct aead_alg aead_algos[] = {
 		.setkey = artpec6_crypto_aead_set_key,
 		.encrypt = artpec6_crypto_aead_encrypt,
 		.decrypt = artpec6_crypto_aead_decrypt,
-		.ivsize = AES_BLOCK_SIZE,
+		.ivsize = GCM_AES_IV_SIZE,
 		.maxauthsize = AES_BLOCK_SIZE,
 
 		.base = {
-- 
2.14.1

[PATCH AUTOSEL for 4.15 77/78] hwrng: core - Clean up RNG list when last hwrng is unregistered

[Sasha Levin]

From: Gary R Hook <gary.hook@amd.com>

[ Upstream commit 0e4b52942b1c76f89e0dcb829f72e123d0678f54 ]

Commit 142a27f0a731 added support for a "best" RNG, and in doing so
introduced a hang from rmmod/modprobe -r when the last RNG on the list
was unloaded.

When the hwrng list is depleted, return the global variables to their
original state and decrement all references to the object.

Fixes: 142a27f0a731 ("hwrng: core - Reset user selected rng by writing "" to rng_current")
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/char/hw_random/core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 657b8770b6b9..91bb98c42a1c 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -306,6 +306,10 @@ static int enable_best_rng(void)
 		ret = ((new_rng == current_rng) ? 0 : set_current_rng(new_rng));
 		if (!ret)
 			cur_rng_set_by_user = 0;
+	} else {
+		drop_current_rng();
+		cur_rng_set_by_user = 0;
+		ret = 0;
 	}
 
 	return ret;
-- 
2.14.1

[PATCH AUTOSEL for 4.15 78/78] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit d087f15786021a9605b20f4c678312510be4cac1 ]

Register layout of a typical TPCC_EVT_MUX_M_N register is such that the
lowest numbered event is at the lowest byte address and highest numbered
event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is
different,  in that the lowest numbered event is at the highest address
and highest numbered event is at the lowest address. Therefore, modify
ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register
accordingly.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/ti-dma-crossbar.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 7df910e7c348..9272b173c746 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -54,7 +54,15 @@ struct ti_am335x_xbar_map {
 
 static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
 {
-	writeb_relaxed(val, iomem + event);
+	/*
+	 * TPCC_EVT_MUX_60_63 register layout is different than the
+	 * rest, in the sense, that event 63 is mapped to lowest byte
+	 * and event 60 is mapped to highest, handle it separately.
+	 */
+	if (event >= 60 && event <= 63)
+		writeb_relaxed(val, iomem + (63 - event % 4));
+	else
+		writeb_relaxed(val, iomem + event);
 }
 
 static void ti_am335x_xbar_free(struct device *dev, void *route_data)
-- 
2.14.1