From: Brian Masney <masneyb@onstation.org>
To: jic23@kernel.org, linux-iio@vger.kernel.org
Cc: devel@driverdev.osuosl.org, lars@metafoo.de,
gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
Jon.Brenner@ams.com, pmeerw@pmeerw.net, knaack.h@gmx.de
Subject: [PATCH 06/11] staging: iio: tsl2x7x: make logging consistent and correct newlines
Date: Wed, 21 Mar 2018 06:29:07 -0400 [thread overview]
Message-ID: <20180321102912.5130-7-masneyb@onstation.org> (raw)
In-Reply-To: <20180321102912.5130-1-masneyb@onstation.org>
This patch updates all of the logging commands so that they are
consistent with the other messages, includes __func__ in the message,
and all of the messages include newlines. This patch also removes some
debug log messages.
Signed-off-by: Brian Masney <masneyb@onstation.org>
---
Changes since v1:
- Remove some debug messages and every log message doesn't have to have
the function name.
- Earlier patches in this current series dropped some of the debug
messages that were in v1.
drivers/staging/iio/light/tsl2x7x.c | 42 ++++++++++++++-----------------------
1 file changed, 16 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index f7e7fcc17059..07ce3076a05d 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -374,7 +374,8 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
ret = i2c_smbus_read_byte_data(chip->client, reg);
if (ret < 0) {
dev_err(&chip->client->dev,
- "failed to read. err=%x\n", ret);
+ "%s: failed to read from register %x: %d\n",
+ __func__, reg, ret);
goto out_unlock;
}
@@ -416,7 +417,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
/* note: lux is 31 bit max at this point */
if (ch1lux > ch0lux) {
- dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n");
+ dev_dbg(&chip->client->dev,
+ "%s: ch1lux > ch0lux; returning last value\n",
+ __func__);
ret = chip->als_cur_info.lux;
goto out_unlock;
}
@@ -591,8 +594,6 @@ static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
return -ERANGE;
chip->settings.als_gain_trim = ret;
- dev_info(&chip->client->dev,
- "%s als_calibrate completed\n", chip->client->name);
return ret;
}
@@ -674,12 +675,14 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
*/
for (i = 0, dev_reg = chip->tsl2x7x_config;
i < TSL2X7X_MAX_CONFIG_REG; i++) {
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2X7X_CMD_REG + i,
+ int reg = TSL2X7X_CMD_REG + i;
+
+ ret = i2c_smbus_write_byte_data(chip->client, reg,
*dev_reg++);
if (ret < 0) {
dev_err(&chip->client->dev,
- "failed on write to reg %d.\n", i);
+ "%s: failed to write to register %x: %d\n",
+ __func__, reg, ret);
return ret;
}
}
@@ -907,15 +910,11 @@ static ssize_t in_illuminance0_lux_table_store(struct device *dev,
*/
n = value[0];
if ((n % 3) || n < 6 ||
- n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
- dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
+ n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3))
return -EINVAL;
- }
- if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
- dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
+ if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0)
return -EINVAL;
- }
if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
ret = tsl2x7x_chip_off(indio_dev);
@@ -1048,15 +1047,10 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
chip->settings.persistence &= 0xF0;
chip->settings.persistence |=
(filter_delay & 0x0F);
- dev_info(&chip->client->dev, "%s: ALS persistence = %d",
- __func__, filter_delay);
} else {
chip->settings.persistence &= 0x0F;
chip->settings.persistence |=
((filter_delay << 4) & 0xF0);
- dev_info(&chip->client->dev,
- "%s: Proximity persistence = %d",
- __func__, filter_delay);
}
ret = 0;
break;
@@ -1269,9 +1263,6 @@ static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_INT_TIME:
chip->settings.als_time =
TSL2X7X_MAX_TIMER_CNT - (val2 / TSL2X7X_MIN_ITIME);
-
- dev_info(&chip->client->dev, "%s: als time = %d",
- __func__, chip->settings.als_time);
break;
default:
return -EINVAL;
@@ -1633,8 +1624,9 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
ret = i2c_smbus_write_byte(clientp, TSL2X7X_CMD_REG | TSL2X7X_CNTRL);
if (ret < 0) {
- dev_err(&clientp->dev, "write to cmd reg failed. err = %d\n",
- ret);
+ dev_err(&clientp->dev,
+ "%s: Failed to write to CMD register: %d\n",
+ __func__, ret);
return ret;
}
@@ -1664,7 +1656,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
indio_dev);
if (ret) {
dev_err(&clientp->dev,
- "%s: irq request failed", __func__);
+ "%s: irq request failed\n", __func__);
return ret;
}
}
@@ -1681,8 +1673,6 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
return ret;
}
- dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
-
return 0;
}
--
2.14.3
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2018-03-21 10:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-21 10:29 [PATCH 00/11] staging: iio: tsl2x7x: staging cleanups Brian Masney
2018-03-21 10:29 ` [PATCH 01/11] staging: iio: tsl2x7x: remove unnecessary code Brian Masney
2018-03-24 13:32 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 02/11] staging: iio: tsl2x7x: correct interrupt handler trigger Brian Masney
2018-03-24 13:33 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 03/11] staging: iio: tsl2x7x: no need to clear interrupt flag when getting lux Brian Masney
2018-03-24 13:34 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 04/11] staging: iio: tsl2x7x: simplify tsl2x7x_prox_cal() Brian Masney
2018-03-24 13:35 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 05/11] staging: iio: tsl2x7x: split out als and prox interrupt settings Brian Masney
2018-03-24 13:36 ` Jonathan Cameron
2018-03-21 10:29 ` Brian Masney [this message]
2018-03-24 13:39 ` [PATCH 06/11] staging: iio: tsl2x7x: make logging consistent and correct newlines Jonathan Cameron
2018-03-21 10:29 ` [PATCH 07/11] staging: iio: tsl2x7x: split out als and prox persistence settings Brian Masney
2018-03-24 13:40 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 08/11] staging: iio: tsl2x7x: remove unused variables from tsl2x7x_get_lux() Brian Masney
2018-03-24 13:41 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 09/11] staging: iio: tsl2x7x: remove ch0 and ch1 " Brian Masney
2018-03-24 13:42 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 10/11] staging: iio: tsl2x7x: put local variables in reverse Christmas tree order Brian Masney
2018-03-24 13:44 ` Jonathan Cameron
2018-03-21 10:29 ` [PATCH 11/11] staging: iio: tsl2x7x: add copyright Brian Masney
2018-03-24 13:46 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180321102912.5130-7-masneyb@onstation.org \
--to=masneyb@onstation.org \
--cc=Jon.Brenner@ams.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).