* [PATCH] dt-bindings: more status property removal from examples
@ 2018-04-17 13:57 Rob Herring
2018-04-17 15:43 ` Vinod Koul
2018-04-23 15:05 ` Ulf Hansson
0 siblings, 2 replies; 3+ messages in thread
From: Rob Herring @ 2018-04-17 13:57 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Vinod Koul, Mark Rutland, Ralf Baechle, James Hogan, Ulf Hansson,
David Woodhouse, Brian Norris, Boris Brezillon, Marek Vasut,
Richard Weinberger, Matthias Brugger, Tanmay Inamdar,
Bjorn Helgaas, Rodolfo Giometti
Whack-a-mole some more occurrences of status in examples.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
7 files changed, 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
index 23f8d712c3ce..4945aeac4dc4 100644
--- a/Documentation/devicetree/bindings/dma/k3dma.txt
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -23,7 +23,6 @@ Controller:
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
- status = "disable";
};
Client:
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 66026dcf53e1..3f15f6644527 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
power-domains = <&k2g_pds 0xb>;
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
clock-names = "fck", "mmchsdb_fck";
- status = "disabled";
};
------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index a086f1e1cdd7..7f0822b4beae 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
- status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
@@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3C 4>;
- status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 2d5287eeed95..634bb66fc49c 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
- status = "disabled";
};
sdhi1: sd@ee120000 {
@@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
- status = "disabled";
};
sdhi2: sd@ee140000 {
@@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
- status = "disabled";
};
sdhi3: sd@ee160000 {
@@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 1c88526dedfc..c5ba6a4ba1f2 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -20,7 +20,6 @@ Required NFI properties:
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
- clock-names: NFI clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
- ecc-engine: Required ECC Engine node.
- #address-cells: NAND chip index, should be 1.
- #size-cells: Should be 0.
@@ -34,7 +33,6 @@ Example:
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
- status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
@@ -152,7 +150,6 @@ Required BCH properties:
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
- clock-names: ECC clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
Example:
@@ -162,5 +159,4 @@ Example:
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 6fd2decfa66c..92490330dc1c 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -25,8 +25,6 @@ Optional properties:
Example:
-SoC-specific DT Entry:
-
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
@@ -50,8 +48,3 @@ SoC-specific DT Entry:
clocks = <&pcie0clk 0>;
};
-
-Board-specific DT Entry:
- &pcie0 {
- status = "ok";
- };
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
index 0de23b793657..3683874832ae 100644
--- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
@@ -20,5 +20,4 @@ Example:
assert-falling-edge;
compatible = "pps-gpio";
- status = "okay";
};
--
2.14.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] dt-bindings: more status property removal from examples
2018-04-17 13:57 [PATCH] dt-bindings: more status property removal from examples Rob Herring
@ 2018-04-17 15:43 ` Vinod Koul
2018-04-23 15:05 ` Ulf Hansson
1 sibling, 0 replies; 3+ messages in thread
From: Vinod Koul @ 2018-04-17 15:43 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, linux-kernel, Mark Rutland, Ralf Baechle,
James Hogan, Ulf Hansson, David Woodhouse, Brian Norris,
Boris Brezillon, Marek Vasut, Richard Weinberger,
Matthias Brugger, Tanmay Inamdar, Bjorn Helgaas,
Rodolfo Giometti
On Tue, Apr 17, 2018 at 08:57:32AM -0500, Rob Herring wrote:
> Whack-a-mole some more occurrences of status in examples.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: James Hogan <jhogan@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Richard Weinberger <richard@nod.at>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Cc: Tanmay Inamdar <tinamdar@apm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Rodolfo Giometti <giometti@enneenne.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
> Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
These:
Acked-By: Vinod Koul <vinod.koul@intel.com>
--
~Vinod
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] dt-bindings: more status property removal from examples
2018-04-17 13:57 [PATCH] dt-bindings: more status property removal from examples Rob Herring
2018-04-17 15:43 ` Vinod Koul
@ 2018-04-23 15:05 ` Ulf Hansson
1 sibling, 0 replies; 3+ messages in thread
From: Ulf Hansson @ 2018-04-23 15:05 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, Linux Kernel Mailing List, Vinod Koul, Mark Rutland,
Ralf Baechle, James Hogan, David Woodhouse, Brian Norris,
Boris Brezillon, Marek Vasut, Richard Weinberger,
Matthias Brugger, Tanmay Inamdar, Bjorn Helgaas,
Rodolfo Giometti
On 17 April 2018 at 15:57, Rob Herring <robh@kernel.org> wrote:
> Whack-a-mole some more occurrences of status in examples.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: James Hogan <jhogan@kernel.org>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Richard Weinberger <richard@nod.at>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Cc: Tanmay Inamdar <tinamdar@apm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Rodolfo Giometti <giometti@enneenne.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
> Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
> Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
> Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
> Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
> Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
> Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
> 7 files changed, 20 deletions(-)
For mmc:
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
>
> diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
> index 23f8d712c3ce..4945aeac4dc4 100644
> --- a/Documentation/devicetree/bindings/dma/k3dma.txt
> +++ b/Documentation/devicetree/bindings/dma/k3dma.txt
> @@ -23,7 +23,6 @@ Controller:
> dma-requests = <27>;
> interrupts = <0 12 4>;
> clocks = <&pclk>;
> - status = "disable";
> };
>
> Client:
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 66026dcf53e1..3f15f6644527 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
> power-domains = <&k2g_pds 0xb>;
> clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
> clock-names = "fck", "mmchsdb_fck";
> - status = "disabled";
> };
>
> ------------------------------------------------------------------------------
> diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> index a086f1e1cdd7..7f0822b4beae 100644
> --- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> @@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy0: usb2-phy@18 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x18 4>, <0x38 4>;
> - status = "disabled";
>
> resets = <&reset1 4 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> @@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy1: usb2-phy@34 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x34 4>, <0x3C 4>;
> - status = "disabled";
>
> resets = <&reset1 5 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> index 2d5287eeed95..634bb66fc49c 100644
> --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> @@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 314>;
> - status = "disabled";
> };
>
> sdhi1: sd@ee120000 {
> @@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 313>;
> - status = "disabled";
> };
>
> sdhi2: sd@ee140000 {
> @@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 312>;
> - status = "disabled";
> };
>
> sdhi3: sd@ee160000 {
> @@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 311>;
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> index 1c88526dedfc..c5ba6a4ba1f2 100644
> --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> @@ -20,7 +20,6 @@ Required NFI properties:
> - interrupts: Interrupts of NFI.
> - clocks: NFI required clocks.
> - clock-names: NFI clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
> - ecc-engine: Required ECC Engine node.
> - #address-cells: NAND chip index, should be 1.
> - #size-cells: Should be 0.
> @@ -34,7 +33,6 @@ Example:
> clocks = <&pericfg CLK_PERI_NFI>,
> <&pericfg CLK_PERI_NFI_PAD>;
> clock-names = "nfi_clk", "pad_clk";
> - status = "disabled";
> ecc-engine = <&bch>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -152,7 +150,6 @@ Required BCH properties:
> - interrupts: Interrupts of ECC.
> - clocks: ECC required clocks.
> - clock-names: ECC clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
>
> Example:
>
> @@ -162,5 +159,4 @@ Example:
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_NFI_ECC>;
> clock-names = "nfiecc_clk";
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> index 6fd2decfa66c..92490330dc1c 100644
> --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> @@ -25,8 +25,6 @@ Optional properties:
>
> Example:
>
> -SoC-specific DT Entry:
> -
> pcie0: pcie@1f2b0000 {
> status = "disabled";
> device_type = "pci";
> @@ -50,8 +48,3 @@ SoC-specific DT Entry:
> clocks = <&pcie0clk 0>;
> };
>
> -
> -Board-specific DT Entry:
> - &pcie0 {
> - status = "ok";
> - };
> diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> index 0de23b793657..3683874832ae 100644
> --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
> +++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> @@ -20,5 +20,4 @@ Example:
> assert-falling-edge;
>
> compatible = "pps-gpio";
> - status = "okay";
> };
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-04-23 15:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-17 13:57 [PATCH] dt-bindings: more status property removal from examples Rob Herring
2018-04-17 15:43 ` Vinod Koul
2018-04-23 15:05 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).