* [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings
@ 2018-04-20 10:39 Thierry Escande
2018-05-10 8:11 ` Amit Kucheria
0 siblings, 1 reply; 2+ messages in thread
From: Thierry Escande @ 2018-04-20 10:39 UTC (permalink / raw)
To: Andy Gross, David Brown
Cc: Rob Herring, linux-arm-msm, linux-soc, devicetree, linux-kernel
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 52 ++++++++++++++++++-------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 5341a39c0392..f26613ffc9e7 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -444,7 +444,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x12450000 0x100>,
<0x12400000 0x03>;
- interrupts = <0 193 0x0>;
+ interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -456,7 +456,7 @@
pinctrl-1 = <&i2c1_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x12460000 0x1000>;
- interrupts = <0 194 IRQ_TYPE_NONE>;
+ interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -484,7 +484,7 @@
pinctrl-0 = <&i2c2_pins>;
pinctrl-1 = <&i2c2_pins_sleep>;
pinctrl-names = "default", "sleep";
- interrupts = <0 196 IRQ_TYPE_NONE>;
+ interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
@@ -508,7 +508,7 @@
pinctrl-1 = <&i2c3_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16280000 0x1000>;
- interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI3_QUP_CLK>,
<&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
@@ -534,7 +534,7 @@
pinctrl-1 = <&i2c4_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16380000 0x1000>;
- interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI4_QUP_CLK>,
<&gcc GSBI4_H_CLK>;
clock-names = "core", "iface";
@@ -556,7 +556,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x1a240000 0x100>,
<0x1a200000 0x03>;
- interrupts = <0 154 0x0>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -565,7 +565,7 @@
gsbi5_spi: spi@1a280000 {
compatible = "qcom,spi-qup-v1.1.1";
reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
pinctrl-names = "default", "sleep";
@@ -592,7 +592,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16540000 0x100>,
<0x16500000 0x03>;
- interrupts = <0 156 0x0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -604,7 +604,7 @@
pinctrl-1 = <&i2c6_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16580000 0x1000>;
- interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI6_QUP_CLK>,
<&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
@@ -628,7 +628,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
- interrupts = <0 158 0x0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -640,7 +640,7 @@
pinctrl-1 = <&i2c7_pins_sleep>;
pinctrl-names = "default", "sleep";
reg = <0x16680000 0x1000>;
- interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI7_QUP_CLK>,
<&gcc GSBI7_H_CLK>;
clock-names = "core", "iface";
@@ -1056,7 +1056,7 @@
compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
- interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
@@ -1082,7 +1082,7 @@
sdcc1bam:dma@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
- interrupts = <0 98 0>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC1_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1092,7 +1092,7 @@
sdcc3bam:dma@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC3_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1102,7 +1102,7 @@
sdcc4bam:dma@121c2000{
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SDC4_H_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
@@ -1181,7 +1181,7 @@
compatible = "qcom,adreno-3xx";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 80 0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
"core_clk",
@@ -1281,7 +1281,7 @@
label = "MDSS DSI CTRL->0";
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 82 0>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x04700000 0x200>;
reg-names = "dsi_ctrl";
@@ -1350,8 +1350,8 @@
<&mmcc MDP_AXI_CLK>;
reg = <0x07500000 0x100000>;
interrupts =
- <GIC_SPI 63 0>,
- <GIC_SPI 64 0>;
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1366,8 +1366,8 @@
<&mmcc MDP_AXI_CLK>;
reg = <0x07600000 0x100000>;
interrupts =
- <GIC_SPI 61 0>,
- <GIC_SPI 62 0>;
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <2>;
};
@@ -1382,8 +1382,8 @@
<&mmcc GFX3D_AXI_CLK>;
reg = <0x07c00000 0x100000>;
interrupts =
- <GIC_SPI 69 0>,
- <GIC_SPI 70 0>;
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
@@ -1398,8 +1398,8 @@
<&mmcc GFX3D_AXI_CLK>;
reg = <0x07d00000 0x100000>;
interrupts =
- <GIC_SPI 210 0>,
- <GIC_SPI 211 0>;
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
qcom,ncb = <3>;
};
@@ -1418,7 +1418,7 @@
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
- interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
--
2.14.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings
2018-04-20 10:39 [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings Thierry Escande
@ 2018-05-10 8:11 ` Amit Kucheria
0 siblings, 0 replies; 2+ messages in thread
From: Amit Kucheria @ 2018-05-10 8:11 UTC (permalink / raw)
To: Thierry Escande
Cc: Andy Gross, David Brown, Rob Herring, linux-arm-msm, linux-soc,
devicetree, LKML
On Fri, Apr 20, 2018 at 1:39 PM, Thierry Escande
<thierry.escande@linaro.org> wrote:
> Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
> patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
> the use of IRQ_TYPE_NONE").
>
> Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064.dtsi | 52 ++++++++++++++++++-------------------
> 1 file changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 5341a39c0392..f26613ffc9e7 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -444,7 +444,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x12450000 0x100>,
> <0x12400000 0x03>;
> - interrupts = <0 193 0x0>;
> + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -456,7 +456,7 @@
> pinctrl-1 = <&i2c1_pins_sleep>;
> pinctrl-names = "default", "sleep";
> reg = <0x12460000 0x1000>;
> - interrupts = <0 194 IRQ_TYPE_NONE>;
> + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
> clock-names = "core", "iface";
> #address-cells = <1>;
> @@ -484,7 +484,7 @@
> pinctrl-0 = <&i2c2_pins>;
> pinctrl-1 = <&i2c2_pins_sleep>;
> pinctrl-names = "default", "sleep";
> - interrupts = <0 196 IRQ_TYPE_NONE>;
> + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
> clock-names = "core", "iface";
> #address-cells = <1>;
> @@ -508,7 +508,7 @@
> pinctrl-1 = <&i2c3_pins_sleep>;
> pinctrl-names = "default", "sleep";
> reg = <0x16280000 0x1000>;
> - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI3_QUP_CLK>,
> <&gcc GSBI3_H_CLK>;
> clock-names = "core", "iface";
> @@ -534,7 +534,7 @@
> pinctrl-1 = <&i2c4_pins_sleep>;
> pinctrl-names = "default", "sleep";
> reg = <0x16380000 0x1000>;
> - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI4_QUP_CLK>,
> <&gcc GSBI4_H_CLK>;
> clock-names = "core", "iface";
> @@ -556,7 +556,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x1a240000 0x100>,
> <0x1a200000 0x03>;
> - interrupts = <0 154 0x0>;
> + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -565,7 +565,7 @@
> gsbi5_spi: spi@1a280000 {
> compatible = "qcom,spi-qup-v1.1.1";
> reg = <0x1a280000 0x1000>;
> - interrupts = <0 155 0>;
> + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
> pinctrl-0 = <&spi5_default>;
> pinctrl-1 = <&spi5_sleep>;
> pinctrl-names = "default", "sleep";
> @@ -592,7 +592,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x16540000 0x100>,
> <0x16500000 0x03>;
> - interrupts = <0 156 0x0>;
> + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -604,7 +604,7 @@
> pinctrl-1 = <&i2c6_pins_sleep>;
> pinctrl-names = "default", "sleep";
> reg = <0x16580000 0x1000>;
> - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI6_QUP_CLK>,
> <&gcc GSBI6_H_CLK>;
> clock-names = "core", "iface";
> @@ -628,7 +628,7 @@
> compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
> reg = <0x16640000 0x1000>,
> <0x16600000 0x1000>;
> - interrupts = <0 158 0x0>;
> + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
> clock-names = "core", "iface";
> status = "disabled";
> @@ -640,7 +640,7 @@
> pinctrl-1 = <&i2c7_pins_sleep>;
> pinctrl-names = "default", "sleep";
> reg = <0x16680000 0x1000>;
> - interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc GSBI7_QUP_CLK>,
> <&gcc GSBI7_H_CLK>;
> clock-names = "core", "iface";
> @@ -1056,7 +1056,7 @@
> compatible = "qcom,apq8064-ahci", "generic-ahci";
> status = "disabled";
> reg = <0x29000000 0x180>;
> - interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&gcc SFAB_SATA_S_H_CLK>,
> <&gcc SATA_H_CLK>,
> @@ -1082,7 +1082,7 @@
> sdcc1bam:dma@12402000{
> compatible = "qcom,bam-v1.3.0";
> reg = <0x12402000 0x8000>;
> - interrupts = <0 98 0>;
> + interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc SDC1_H_CLK>;
> clock-names = "bam_clk";
> #dma-cells = <1>;
> @@ -1092,7 +1092,7 @@
> sdcc3bam:dma@12182000{
> compatible = "qcom,bam-v1.3.0";
> reg = <0x12182000 0x8000>;
> - interrupts = <0 96 0>;
> + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc SDC3_H_CLK>;
> clock-names = "bam_clk";
> #dma-cells = <1>;
> @@ -1102,7 +1102,7 @@
> sdcc4bam:dma@121c2000{
> compatible = "qcom,bam-v1.3.0";
> reg = <0x121c2000 0x8000>;
> - interrupts = <0 95 0>;
> + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gcc SDC4_H_CLK>;
> clock-names = "bam_clk";
> #dma-cells = <1>;
> @@ -1181,7 +1181,7 @@
> compatible = "qcom,adreno-3xx";
> reg = <0x04300000 0x20000>;
> reg-names = "kgsl_3d0_reg_memory";
> - interrupts = <GIC_SPI 80 0>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "kgsl_3d0_irq";
> clock-names =
> "core_clk",
> @@ -1281,7 +1281,7 @@
> label = "MDSS DSI CTRL->0";
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 82 0>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0x04700000 0x200>;
> reg-names = "dsi_ctrl";
>
> @@ -1350,8 +1350,8 @@
> <&mmcc MDP_AXI_CLK>;
> reg = <0x07500000 0x100000>;
> interrupts =
> - <GIC_SPI 63 0>,
> - <GIC_SPI 64 0>;
> + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> qcom,ncb = <2>;
> };
>
> @@ -1366,8 +1366,8 @@
> <&mmcc MDP_AXI_CLK>;
> reg = <0x07600000 0x100000>;
> interrupts =
> - <GIC_SPI 61 0>,
> - <GIC_SPI 62 0>;
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> qcom,ncb = <2>;
> };
>
> @@ -1382,8 +1382,8 @@
> <&mmcc GFX3D_AXI_CLK>;
> reg = <0x07c00000 0x100000>;
> interrupts =
> - <GIC_SPI 69 0>,
> - <GIC_SPI 70 0>;
> + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> qcom,ncb = <3>;
> };
>
> @@ -1398,8 +1398,8 @@
> <&mmcc GFX3D_AXI_CLK>;
> reg = <0x07d00000 0x100000>;
> interrupts =
> - <GIC_SPI 210 0>,
> - <GIC_SPI 211 0>;
> + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> qcom,ncb = <3>;
> };
>
> @@ -1418,7 +1418,7 @@
> #size-cells = <2>;
> ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
> 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
> - interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-names = "msi";
> #interrupt-cells = <1>;
> interrupt-map-mask = <0 0 0 0x7>;
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-05-10 8:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-20 10:39 [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings Thierry Escande
2018-05-10 8:11 ` Amit Kucheria
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).