linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
	Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Sangbeom Kim <sbkim73@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	linux-kernel@vger.kernel.org
Subject: Applied "regulator: s2mps11: Pass descriptor instead of GPIO number" to the regulator tree
Date: Thu, 17 May 2018 17:41:35 +0100 (BST)	[thread overview]
Message-ID: <20180517164135.98F9344007E@finisterre.ee.mobilebroadband> (raw)
In-Reply-To: <20180212131717.27193-14-linus.walleij@linaro.org>

The patch

   regulator: s2mps11: Pass descriptor instead of GPIO number

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 0369e02b75e6381f892e3bd45f1d8d6330d855fb Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 14 May 2018 10:06:31 +0200
Subject: [PATCH] regulator: s2mps11: Pass descriptor instead of GPIO number

Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up with the standard devm_gpiod_get_optional()
call.

This regulator supports passing platform data, but enable/sleep
regulators are looked up from the device tree exclusively, so
we can need not touch other files.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/s2mps11.c | 46 ++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 7726b874e539..9a1dca26362e 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -18,7 +18,7 @@
 
 #include <linux/bug.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -27,7 +27,6 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/of_gpio.h>
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
@@ -57,7 +56,7 @@ struct s2mps11_info {
 	 * Array (size: number of regulators) with GPIO-s for external
 	 * sleep control.
 	 */
-	int *ext_control_gpio;
+	struct gpio_desc **ext_control_gpiod;
 };
 
 static int get_ramp_delay(int ramp_delay)
@@ -524,7 +523,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
 	case S2MPS14X:
 		if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
 			val = S2MPS14_ENABLE_SUSPEND;
-		else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
+		else if (s2mps11->ext_control_gpiod[rdev_get_id(rdev)])
 			val = S2MPS14_ENABLE_EXT_CONTROL;
 		else
 			val = rdev->desc->enable_mask;
@@ -818,7 +817,7 @@ static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
 static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 		struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
 {
-	int *gpio = s2mps11->ext_control_gpio;
+	struct gpio_desc **gpio = s2mps11->ext_control_gpiod;
 	unsigned int i;
 	unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
 		S2MPS14_LDO12 };
@@ -829,11 +828,20 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 		if (!rdata[reg].init_data || !rdata[reg].of_node)
 			continue;
 
-		gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
-				"samsung,ext-control-gpios", 0);
-		if (gpio_is_valid(gpio[reg]))
-			dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
-					gpio[reg], reg, rdata[reg].name);
+		gpio[reg] = devm_gpiod_get_from_of_node(&pdev->dev,
+							rdata[reg].of_node,
+							"samsung,ext-control-gpios",
+							0,
+							GPIOD_OUT_HIGH,
+							"s2mps11-LDO");
+		if (IS_ERR(gpio[reg])) {
+			dev_err(&pdev->dev, "Failed to get control GPIO for %d/%s\n",
+				reg, rdata[reg].name);
+			continue;
+		}
+		if (gpio[reg])
+			dev_dbg(&pdev->dev, "Using GPIO for ext-control over %d/%s\n",
+				reg, rdata[reg].name);
 	}
 }
 
@@ -1139,17 +1147,11 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
-			sizeof(*s2mps11->ext_control_gpio) * rdev_num,
+	s2mps11->ext_control_gpiod = devm_kmalloc(&pdev->dev,
+			sizeof(*s2mps11->ext_control_gpiod) * rdev_num,
 			GFP_KERNEL);
-	if (!s2mps11->ext_control_gpio)
+	if (!s2mps11->ext_control_gpiod)
 		return -ENOMEM;
-	/*
-	 * 0 is a valid GPIO so initialize all GPIO-s to negative value
-	 * to indicate that external control won't be used for this regulator.
-	 */
-	for (i = 0; i < rdev_num; i++)
-		s2mps11->ext_control_gpio[i] = -EINVAL;
 
 	if (!iodev->dev->of_node) {
 		if (iodev->pdata) {
@@ -1179,8 +1181,6 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 	config.dev = &pdev->dev;
 	config.regmap = iodev->regmap_pmic;
 	config.driver_data = s2mps11;
-	config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
-	config.ena_gpio_initialized = true;
 	for (i = 0; i < rdev_num; i++) {
 		struct regulator_dev *regulator;
 
@@ -1191,7 +1191,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 			config.init_data = rdata[i].init_data;
 			config.of_node = rdata[i].of_node;
 		}
-		config.ena_gpio = s2mps11->ext_control_gpio[i];
+		config.ena_gpiod = s2mps11->ext_control_gpiod[i];
 
 		regulator = devm_regulator_register(&pdev->dev,
 						&regulators[i], &config);
@@ -1202,7 +1202,7 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
 			goto out;
 		}
 
-		if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
+		if (s2mps11->ext_control_gpiod[i]) {
 			ret = s2mps14_pmic_enable_ext_control(s2mps11,
 					regulator);
 			if (ret < 0) {
-- 
2.17.0

  reply	other threads:[~2018-05-17 16:48 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-12 13:16 [PATCH 00/21] regulator: switch core to GPIO descriptors Linus Walleij
2018-02-12 13:16 ` [PATCH 01/21] regulator: core: Support passing an initialized GPIO enable descriptor Linus Walleij
2018-02-16 17:12   ` Applied "regulator: core: Support passing an initialized GPIO enable descriptor" to the regulator tree Mark Brown
2018-02-12 13:16 ` [PATCH 02/21] regulator: fixed: Convert to use GPIO descriptor only Linus Walleij
2018-02-12 15:13   ` Andy Shevchenko
2018-04-19 12:36     ` Linus Walleij
2018-02-12 13:16 ` [PATCH 03/21] regulator: gpio: Get enable GPIO using GPIO descriptor Linus Walleij
2018-05-29 14:59   ` Applied "regulator: gpio: Get enable GPIO using GPIO descriptor" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 04/21] regulator: da9055: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:59   ` Lee Jones
2018-02-16 17:12   ` Applied "regulator: da9055: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 05/21] regulator: arizona-ldo1: Look up a descriptor and pass to the core Linus Walleij
2018-02-13 11:06   ` Charles Keepax
2018-04-19 13:43     ` Linus Walleij
2018-04-19 15:02       ` Charles Keepax
2018-02-13 11:51   ` Charles Keepax
2018-02-12 13:17 ` [PATCH 06/21] regulator: da9211: Pass descriptors instead of GPIO numbers Linus Walleij
2018-02-16 17:12   ` Applied "regulator: da9211: Pass descriptors instead of GPIO numbers" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 07/21] regulator: max8973: Pass descriptor instead of GPIO number Linus Walleij
2018-05-24 19:14   ` Applied "regulator: max8973: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 08/21] regulator: max77686: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 13:37   ` Krzysztof Kozlowski
2018-02-12 13:17 ` [PATCH 09/21] regulator: lm363x: " Linus Walleij
2018-05-24 19:14   ` Applied "regulator: lm363x: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 10/21] regulator: lp8788-ldo: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:59   ` Lee Jones
2018-05-24 19:14   ` Applied "regulator: lp8788-ldo: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 11/21] regulator: max8952: Pass descriptor instead of GPIO number Linus Walleij
2018-05-24 19:14   ` Applied "regulator: max8952: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 12/21] regulator: pfuze100: Delete reference to ena_gpio Linus Walleij
2018-05-24 19:14   ` Applied "regulator: pfuze100: Delete reference to ena_gpio" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 13/21] regulator: s2mps11: Pass descriptor instead of GPIO number Linus Walleij
2018-05-17 16:41   ` Mark Brown [this message]
2018-02-12 13:17 ` [PATCH 14/21] regulator: s5m8767: " Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-05-24 19:13   ` Applied "regulator: s5m8767: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 15/21] regulator: tps65090: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-05-24 19:13   ` Applied "regulator: tps65090: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-12 13:17 ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-02-13 11:11   ` Charles Keepax
2018-04-19 13:55     ` Linus Walleij
2018-04-19 14:05       ` Mark Brown
2018-04-19 15:01       ` [PATCH] ARM: s3c64xx: Tidy up handling of regulator GPIO lookups Charles Keepax
2018-05-14  5:54         ` Linus Walleij
2018-02-13 11:52   ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Charles Keepax
2018-02-12 13:17 ` [PATCH 17/21] regulator: core: Only support passing enable GPIO descriptors Linus Walleij
2018-02-12 13:17 ` [PATCH 18/21] regulator: fixed/gpio: Pull inversion/OD into gpiolib Linus Walleij
2018-02-17  9:59   ` Robert Jarzmik
2018-02-12 13:17 ` [PATCH 19/21] regulator: fixed/gpio: Update device tree bindings Linus Walleij
2018-02-19  2:41   ` Rob Herring
2018-02-12 13:17 ` [PATCH 20/21] regulator: gpio: Convert to fully use descriptors Linus Walleij
2018-02-12 13:17 ` [PATCH 21/21] regulator: gpio: Simplify probe path Linus Walleij
2018-11-15 19:47 Applied "regulator: s2mps11: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180517164135.98F9344007E@finisterre.ee.mobilebroadband \
    --to=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=krzk@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sbkim73@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).