linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2 net] net: hns: Fix the process of adding broadcast addresses to tcam
@ 2018-06-04 16:50 Salil Mehta
  2018-06-04 21:33 ` David Miller
  0 siblings, 1 reply; 2+ messages in thread
From: Salil Mehta @ 2018-06-04 16:50 UTC (permalink / raw)
  To: davem
  Cc: salil.mehta, yisen.zhuang, lipeng321, mehta.salil, netdev,
	linux-kernel, linuxarm, Xi Wang

From: Xi Wang <wangxi11@huawei.com>

If the multicast mask value in device tree is configured not all
0xff, the broadcast mac will be lost from tcam table after the
execution of command 'ifconfig up'. The address is appended by
hns_ae_start, but will be clear later by hns_nic_set_rx_mode
called in dev_open process.

This patch fixed it by not use the multicast mask when add a
broadcast address.

Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
Patch V2: Fixed comments by David Miller
   Link: https://lkml.org/lkml/2018/6/4/671
Patch V1: Initial Submit
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 23 +++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index e0bc79e..85e1d14 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -1648,6 +1648,15 @@ int hns_dsaf_rm_mac_addr(
 				      mac_entry->addr);
 }
 
+static void hns_dsaf_setup_mc_mask(struct dsaf_device *dsaf_dev,
+				   u8 port_num, u8 *mask, u8 *addr)
+{
+	if (MAC_IS_BROADCAST(addr))
+		memset(mask, 0xff, ETH_ALEN);
+	else
+		memcpy(mask, dsaf_dev->mac_cb[port_num]->mc_mask, ETH_ALEN);
+}
+
 static void hns_dsaf_mc_mask_bit_clear(char *dst, const char *src)
 {
 	u16 *a = (u16 *)dst;
@@ -1676,7 +1685,6 @@ int hns_dsaf_add_mac_mc_port(struct dsaf_device *dsaf_dev,
 	struct dsaf_drv_tbl_tcam_key tmp_mac_key;
 	struct dsaf_tbl_tcam_data tcam_data;
 	u8 mc_addr[ETH_ALEN];
-	u8 *mc_mask;
 	int mskid;
 
 	/*chechk mac addr */
@@ -1687,9 +1695,12 @@ int hns_dsaf_add_mac_mc_port(struct dsaf_device *dsaf_dev,
 	}
 
 	ether_addr_copy(mc_addr, mac_entry->addr);
-	mc_mask = dsaf_dev->mac_cb[mac_entry->in_port_num]->mc_mask;
 	if (!AE_IS_VER1(dsaf_dev->dsaf_ver)) {
+		u8 mc_mask[ETH_ALEN];
+
 		/* prepare for key data setting */
+		hns_dsaf_setup_mc_mask(dsaf_dev, mac_entry->in_port_num,
+				       mc_mask, mac_entry->addr);
 		hns_dsaf_mc_mask_bit_clear(mc_addr, mc_mask);
 
 		/* config key mask */
@@ -1844,7 +1855,6 @@ int hns_dsaf_del_mac_mc_port(struct dsaf_device *dsaf_dev,
 	struct dsaf_drv_tbl_tcam_key mask_key, tmp_mac_key;
 	struct dsaf_tbl_tcam_data *pmask_key = NULL;
 	u8 mc_addr[ETH_ALEN];
-	u8 *mc_mask;
 
 	if (!(void *)mac_entry) {
 		dev_err(dsaf_dev->dev,
@@ -1861,14 +1871,17 @@ int hns_dsaf_del_mac_mc_port(struct dsaf_device *dsaf_dev,
 
 	/* always mask vlan_id field */
 	ether_addr_copy(mc_addr, mac_entry->addr);
-	mc_mask = dsaf_dev->mac_cb[mac_entry->in_port_num]->mc_mask;
 
 	if (!AE_IS_VER1(dsaf_dev->dsaf_ver)) {
+		u8 mc_mask[ETH_ALEN];
+
 		/* prepare for key data setting */
+		hns_dsaf_setup_mc_mask(dsaf_dev, mac_entry->in_port_num,
+				       mc_mask, mac_entry->addr);
 		hns_dsaf_mc_mask_bit_clear(mc_addr, mc_mask);
 
 		/* config key mask */
-		hns_dsaf_set_mac_key(dsaf_dev, &mask_key, 0x00, 0xff, mc_addr);
+		hns_dsaf_set_mac_key(dsaf_dev, &mask_key, 0x00, 0xff, mc_mask);
 
 		mask_key.high.val = le32_to_cpu(mask_key.high.val);
 		mask_key.low.val = le32_to_cpu(mask_key.low.val);
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH V2 net] net: hns: Fix the process of adding broadcast addresses to tcam
  2018-06-04 16:50 [PATCH V2 net] net: hns: Fix the process of adding broadcast addresses to tcam Salil Mehta
@ 2018-06-04 21:33 ` David Miller
  0 siblings, 0 replies; 2+ messages in thread
From: David Miller @ 2018-06-04 21:33 UTC (permalink / raw)
  To: salil.mehta
  Cc: yisen.zhuang, lipeng321, mehta.salil, netdev, linux-kernel,
	linuxarm, wangxi11

From: Salil Mehta <salil.mehta@huawei.com>
Date: Mon, 4 Jun 2018 17:50:09 +0100

> From: Xi Wang <wangxi11@huawei.com>
> 
> If the multicast mask value in device tree is configured not all
> 0xff, the broadcast mac will be lost from tcam table after the
> execution of command 'ifconfig up'. The address is appended by
> hns_ae_start, but will be clear later by hns_nic_set_rx_mode
> called in dev_open process.
> 
> This patch fixed it by not use the multicast mask when add a
> broadcast address.
> 
> Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
> Signed-off-by: Xi Wang <wangxi11@huawei.com>
> Signed-off-by: Peng Li <lipeng321@huawei.com>
> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
> ---
> Patch V2: Fixed comments by David Miller
>    Link: https://lkml.org/lkml/2018/6/4/671
> Patch V1: Initial Submit

Applied and queued up for -stable, thank you.

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-06-04 21:33 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-04 16:50 [PATCH V2 net] net: hns: Fix the process of adding broadcast addresses to tcam Salil Mehta
2018-06-04 21:33 ` David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).